µVision Build Log
Project:
C:\Users\Administrator\Desktop\TX\Project\Project.uvproj Project File Date: 02/08/2017Output:
Build target 'PROJECT' linking... ..\Output\Project.axf: Error: L6218E: Undefined symbol NRF24L01_Check (referred from main.o). ..\Output\Project.axf: Error: L6218E: Undefined symbol NRF24L01_Init (referred from main.o). ..\Output\Project.axf: Error: L6218E: Undefined symbol NRF24L01_TxPacket (referred from main.o). ..\Output\Project.axf: Error: L6218E: Undefined symbol TX_Mode (referred from main.o). "..\Output\Project.axf" - 4 Errors, 0 Warning(s). Target not created Build target 'PROJECT' linking... ..\Output\Project.axf: Error: L6218E: Undefined symbol NRF24L01_Check (referred from main.o). ..\Output\Project.axf: Error: L6218E: Undefined symbol NRF24L01_Init (referred from main.o). ..\Output\Project.axf: Error: L6218E: Undefined symbol NRF24L01_TxPacket (referred from main.o). ..\Output\Project.axf: Error: L6218E: Undefined symbol TX_Mode (referred from main.o). "..\Output\Project.axf" - 4 Errors, 0 Warning(s). Target not created Build target 'PROJECT' compiling core_cm3.c... compiling system_stm32f10x.c... compiling misc.c... compiling stm32f10x_adc.c... compiling stm32f10x_bkp.c... compiling stm32f10x_can.c... compiling stm32f10x_cec.c... compiling stm32f10x_crc.c... compiling stm32f10x_dac.c... compiling stm32f10x_dbgmcu.c... compiling stm32f10x_dma.c... compiling stm32f10x_exti.c... compiling stm32f10x_flash.c... compiling stm32f10x_fsmc.c... compiling stm32f10x_gpio.c... compiling stm32f10x_i2c.c... compiling stm32f10x_iwdg.c... compiling stm32f10x_pwr.c... compiling stm32f10x_rcc.c... compiling stm32f10x_rtc.c... compiling stm32f10x_sdio.c... compiling stm32f10x_spi.c... compiling stm32f10x_tim.c... compiling stm32f10x_usart.c... compiling stm32f10x_wwdg.c... compiling delay.c... compiling bsp_NVIC.C... compiling bsp_iic.c... compiling bsp_GPIO.c... compiling bsp_usart.c... compiling 24cxx.c... compiling oled.c... compiling 24l01.c... ..\HARDWARE\24L01\24l01.c(3): error: #5: cannot open source input file "bsp_spi.h": No such file or directory compiling main.c... compiling stm32f10x_it.c... "..\Output\Project.axf" - 1 Errors, 0 Warning(s). Target not created Build target 'PROJECT' compiling core_cm3.c... compiling system_stm32f10x.c... compiling misc.c... compiling stm32f10x_adc.c... compiling stm32f10x_bkp.c... compiling stm32f10x_can.c... compiling stm32f10x_cec.c... compiling stm32f10x_crc.c... compiling stm32f10x_dac.c... compiling stm32f10x_dbgmcu.c... compiling stm32f10x_dma.c... compiling stm32f10x_exti.c... compiling stm32f10x_flash.c... compiling stm32f10x_fsmc.c... compiling stm32f10x_gpio.c... compiling stm32f10x_i2c.c... compiling stm32f10x_iwdg.c... compiling stm32f10x_pwr.c... compiling stm32f10x_rcc.c... compiling stm32f10x_rtc.c... compiling stm32f10x_sdio.c... compiling stm32f10x_spi.c... compiling stm32f10x_tim.c... compiling stm32f10x_usart.c... compiling stm32f10x_wwdg.c... compiling delay.c... compiling bsp_NVIC.C... compiling bsp_iic.c... compiling bsp_GPIO.c... compiling bsp_usart.c... compiling bsp_spi.c... compiling 24cxx.c... compiling oled.c... compiling 24l01.c... compiling main.c... compiling stm32f10x_it.c... linking... Program Size: Code=11120 RO-data=2364 RW-data=964 ZI-data=1908 FromELF: creating hex file... "..\Output\Project.axf" - 0 Errors, 0 Warning(s). Load "..\\Output\\Project.axf" Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini" * JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM). JLink info: ------------ DLL: V4.90 , compiled Jul 28 2014 10:35:20 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found Cortex-M3 r1p1, Little endian. * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots * JLink Info: TPIU fitted. ROMTableAddr = 0xE00FF003 Target info: ------------ Device: STM32F103C8 VTarget = 3.300V State of Pins: TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 6 Software-Breakpoints: 8192 Watchpoints: 4 JTAG speed: 1000 kHz Erase Done. Programming Done. Verify OK. Application running ... Build target 'PROJECT' compiling 24l01.c... compiling main.c... linking... Program Size: Code=11116 RO-data=2364 RW-data=964 ZI-data=1908 FromELF: creating hex file... "..\Output\Project.axf" - 0 Errors, 0 Warning(s). Load "..\\Output\\Project.axf" Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini" * JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM). JLink info: ------------ DLL: V4.90 , compiled Jul 28 2014 10:35:20 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found Cortex-M3 r1p1, Little endian. * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots * JLink Info: TPIU fitted. ROMTableAddr = 0xE00FF003 Target info: ------------ Device: STM32F103C8 VTarget = 3.300V State of Pins: TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 6 Software-Breakpoints: 8192 Watchpoints: 4 JTAG speed: 1000 kHz Erase Done. Programming Done. Verify OK. Application running ... Load "..\\Output\\Project.axf" Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini" * JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM). JLink info: ------------ DLL: V4.90 , compiled Jul 28 2014 10:35:20 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found Cortex-M3 r1p1, Little endian. * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots * JLink Info: TPIU fitted. ROMTableAddr = 0xE00FF003 Target info: ------------ Device: STM32F103C8 VTarget = 3.300V State of Pins: TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 6 Software-Breakpoints: 8192 Watchpoints: 4 JTAG speed: 1000 kHz Erase Done. Programming Done. Verify OK. Application running ... Build target 'PROJECT' compiling main.c... ..\User\main.c(40): warning: #177-D: variable "tmp" was declared but never referenced linking... Program Size: Code=11012 RO-data=2364 RW-data=964 ZI-data=1908 FromELF: creating hex file... "..\Output\Project.axf" - 0 Errors, 1 Warning(s). Load "..\\Output\\Project.axf" Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini" * JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM). JLink info: ------------ DLL: V4.90 , compiled Jul 28 2014 10:35:20 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found Cortex-M3 r1p1, Little endian. * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots * JLink Info: TPIU fitted. ROMTableAddr = 0xE00FF003 Target info: ------------ Device: STM32F103C8 VTarget = 3.300V State of Pins: TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 6 Software-Breakpoints: 8192 Watchpoints: 4 JTAG speed: 1000 kHz Erase Done. Programming Done. Verify OK. Application running ... Build target 'PROJECT' compiling main.c... ..\User\main.c(40): warning: #177-D: variable "tmp" was declared but never referenced linking... Program Size: Code=11008 RO-data=2364 RW-data=964 ZI-data=1908 FromELF: creating hex file... "..\Output\Project.axf" - 0 Errors, 1 Warning(s). Load "..\\Output\\Project.axf" Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini" * JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM). JLink info: ------------ DLL: V4.90 , compiled Jul 28 2014 10:35:20 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found Cortex-M3 r1p1, Little endian. * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots * JLink Info: TPIU fitted. ROMTableAddr = 0xE00FF003 Target info: ------------ Device: STM32F103C8 VTarget = 3.300V State of Pins: TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 6 Software-Breakpoints: 8192 Watchpoints: 4 JTAG speed: 1000 kHz Erase Done. Programming Done. Verify OK. Application running ... Build target 'PROJECT' compiling main.c... ..\User\main.c(40): warning: #177-D: variable "tmp" was declared but never referenced ..\User\main.c(42): warning: #177-D: variable "p" was declared but never referenced linking... Program Size: Code=6914 RO-data=2342 RW-data=952 ZI-data=1632 FromELF: creating hex file... "..\Output\Project.axf" - 0 Errors, 2 Warning(s). Load "..\\Output\\Project.axf" Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini" * JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM). JLink info: ------------ DLL: V4.90 , compiled Jul 28 2014 10:35:20 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found Cortex-M3 r1p1, Little endian. * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots * JLink Info: TPIU fitted. ROMTableAddr = 0xE00FF003 Target info: ------------ Device: STM32F103C8 VTarget = 3.300V State of Pins: TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 6 Software-Breakpoints: 8192 Watchpoints: 4 JTAG speed: 1000 kHz Erase Done. Programming Done. Verify OK. Application running ... Build target 'PROJECT' compiling main.c... ..\User\main.c(42): warning: #177-D: variable "p" was declared but never referenced linking... Program Size: Code=8746 RO-data=2350 RW-data=952 ZI-data=1656 FromELF: creating hex file... "..\Output\Project.axf" - 0 Errors, 1 Warning(s). Load "..\\Output\\Project.axf" Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini" * JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM). JLink info: ------------ DLL: V4.90 , compiled Jul 28 2014 10:35:20 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found Cortex-M3 r1p1, Little endian. * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots * JLink Info: TPIU fitted. ROMTableAddr = 0xE00FF003 Target info: ------------ Device: STM32F103C8 VTarget = 3.300V State of Pins: TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 6 Software-Breakpoints: 8192 Watchpoints: 4 JTAG speed: 1000 kHz Erase Done. Programming Done. Verify OK. Application running ... Build target 'PROJECT' compiling main.c... ..\User\main.c(42): warning: #177-D: variable "p" was declared but never referenced linking... Program Size: Code=8750 RO-data=2350 RW-data=952 ZI-data=1656 FromELF: creating hex file... "..\Output\Project.axf" - 0 Errors, 1 Warning(s). Load "..\\Output\\Project.axf" Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini" * JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM). JLink info: ------------ DLL: V4.90 , compiled Jul 28 2014 10:35:20 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found Cortex-M3 r1p1, Little endian. * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots * JLink Info: TPIU fitted. ROMTableAddr = 0xE00FF003 Target info: ------------ Device: STM32F103C8 VTarget = 3.300V State of Pins: TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 6 Software-Breakpoints: 8192 Watchpoints: 4 JTAG speed: 1000 kHz Erase Done. Programming Done. Verify OK. Application running ... Build target 'PROJECT' compiling main.c... linking... Program Size: Code=8806 RO-data=2350 RW-data=952 ZI-data=1688 FromELF: creating hex file... "..\Output\Project.axf" - 0 Errors, 0 Warning(s). Load "..\\Output\\Project.axf" Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini" * JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM). JLink info: ------------ DLL: V4.90 , compiled Jul 28 2014 10:35:20 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found Cortex-M3 r1p1, Little endian. * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots * JLink Info: TPIU fitted. ROMTableAddr = 0xE00FF003 Target info: ------------ Device: STM32F103C8 VTarget = 3.300V State of Pins: TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 6 Software-Breakpoints: 8192 Watchpoints: 4 JTAG speed: 1000 kHz Erase Done. Programming Done. Verify OK. Application running ... Load "..\\Output\\Project.axf" Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini" * JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM). JLink info: ------------ DLL: V4.90 , compiled Jul 28 2014 10:35:20 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found Cortex-M3 r1p1, Little endian. * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots * JLink Info: TPIU fitted. ROMTableAddr = 0xE00FF003 Target info: ------------ Device: STM32F103C8 VTarget = 3.300V State of Pins: TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 6 Software-Breakpoints: 8192 Watchpoints: 4 JTAG speed: 1000 kHz Erase Done. Programming Done. Verify OK. Application running ... Load "..\\Output\\Project.axf" Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini" * JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM). JLink info: ------------ DLL: V4.90 , compiled Jul 28 2014 10:35:20 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 S/N : 20090928 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found SWD-DP with ID 0x1BA01477 * JLink Info: Found Cortex-M3 r1p1, Little endian. * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots * JLink Info: TPIU fitted. * JLink Info: ETM fitted. ROMTableAddr = 0xE00FF003 Target info: ------------ Device: STM32F103C8 VTarget = 3.300V State of Pins: TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 6 Software-Breakpoints: 8192 Watchpoints: 4 JTAG speed: 1000 kHz Erase Done. Programming Done. Verify OK. Application running ...