forked from logzhan/RobotHardware-UESTC
309 lines
8.0 KiB
C
309 lines
8.0 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f10x_bkp.c
|
|
* @author MCD Application Team
|
|
* @version V3.5.0
|
|
* @date 11-March-2011
|
|
* @brief This file provides all the BKP firmware functions.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
|
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
|
|
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
|
|
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
|
|
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
|
|
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
|
*
|
|
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f10x_bkp.h"
|
|
#include "stm32f10x_rcc.h"
|
|
|
|
/** @addtogroup STM32F10x_StdPeriph_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup BKP
|
|
* @brief BKP driver modules
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup BKP_Private_TypesDefinitions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup BKP_Private_Defines
|
|
* @{
|
|
*/
|
|
|
|
/* ------------ BKP registers bit address in the alias region --------------- */
|
|
#define BKP_OFFSET (BKP_BASE - PERIPH_BASE)
|
|
|
|
/* --- CR Register ----*/
|
|
|
|
/* Alias word address of TPAL bit */
|
|
#define CR_OFFSET (BKP_OFFSET + 0x30)
|
|
#define TPAL_BitNumber 0x01
|
|
#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4))
|
|
|
|
/* Alias word address of TPE bit */
|
|
#define TPE_BitNumber 0x00
|
|
#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4))
|
|
|
|
/* --- CSR Register ---*/
|
|
|
|
/* Alias word address of TPIE bit */
|
|
#define CSR_OFFSET (BKP_OFFSET + 0x34)
|
|
#define TPIE_BitNumber 0x02
|
|
#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4))
|
|
|
|
/* Alias word address of TIF bit */
|
|
#define TIF_BitNumber 0x09
|
|
#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4))
|
|
|
|
/* Alias word address of TEF bit */
|
|
#define TEF_BitNumber 0x08
|
|
#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4))
|
|
|
|
/* ---------------------- BKP registers bit mask ------------------------ */
|
|
|
|
/* RTCCR register bit mask */
|
|
#define RTCCR_CAL_MASK ((uint16_t)0xFF80)
|
|
#define RTCCR_MASK ((uint16_t)0xFC7F)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup BKP_Private_Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup BKP_Private_Variables
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup BKP_Private_FunctionPrototypes
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup BKP_Private_Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Deinitializes the BKP peripheral registers to their default reset values.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void BKP_DeInit(void)
|
|
{
|
|
RCC_BackupResetCmd(ENABLE);
|
|
RCC_BackupResetCmd(DISABLE);
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the Tamper Pin active level.
|
|
* @param BKP_TamperPinLevel: specifies the Tamper Pin active level.
|
|
* This parameter can be one of the following values:
|
|
* @arg BKP_TamperPinLevel_High: Tamper pin active on high level
|
|
* @arg BKP_TamperPinLevel_Low: Tamper pin active on low level
|
|
* @retval None
|
|
*/
|
|
void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel));
|
|
*(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel;
|
|
}
|
|
|
|
/**
|
|
* @brief Enables or disables the Tamper Pin activation.
|
|
* @param NewState: new state of the Tamper Pin activation.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void BKP_TamperPinCmd(FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
*(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState;
|
|
}
|
|
|
|
/**
|
|
* @brief Enables or disables the Tamper Pin Interrupt.
|
|
* @param NewState: new state of the Tamper Pin Interrupt.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
void BKP_ITConfig(FunctionalState NewState)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FUNCTIONAL_STATE(NewState));
|
|
*(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState;
|
|
}
|
|
|
|
/**
|
|
* @brief Select the RTC output source to output on the Tamper pin.
|
|
* @param BKP_RTCOutputSource: specifies the RTC output source.
|
|
* This parameter can be one of the following values:
|
|
* @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin.
|
|
* @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency
|
|
* divided by 64 on the Tamper pin.
|
|
* @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on
|
|
* the Tamper pin.
|
|
* @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on
|
|
* the Tamper pin.
|
|
* @retval None
|
|
*/
|
|
void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource)
|
|
{
|
|
uint16_t tmpreg = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource));
|
|
tmpreg = BKP->RTCCR;
|
|
/* Clear CCO, ASOE and ASOS bits */
|
|
tmpreg &= RTCCR_MASK;
|
|
|
|
/* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */
|
|
tmpreg |= BKP_RTCOutputSource;
|
|
/* Store the new value */
|
|
BKP->RTCCR = tmpreg;
|
|
}
|
|
|
|
/**
|
|
* @brief Sets RTC Clock Calibration value.
|
|
* @param CalibrationValue: specifies the RTC Clock Calibration value.
|
|
* This parameter must be a number between 0 and 0x7F.
|
|
* @retval None
|
|
*/
|
|
void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue)
|
|
{
|
|
uint16_t tmpreg = 0;
|
|
/* Check the parameters */
|
|
assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue));
|
|
tmpreg = BKP->RTCCR;
|
|
/* Clear CAL[6:0] bits */
|
|
tmpreg &= RTCCR_CAL_MASK;
|
|
/* Set CAL[6:0] bits according to CalibrationValue value */
|
|
tmpreg |= CalibrationValue;
|
|
/* Store the new value */
|
|
BKP->RTCCR = tmpreg;
|
|
}
|
|
|
|
/**
|
|
* @brief Writes user data to the specified Data Backup Register.
|
|
* @param BKP_DR: specifies the Data Backup Register.
|
|
* This parameter can be BKP_DRx where x:[1, 42]
|
|
* @param Data: data to write
|
|
* @retval None
|
|
*/
|
|
void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data)
|
|
{
|
|
__IO uint32_t tmp = 0;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_BKP_DR(BKP_DR));
|
|
|
|
tmp = (uint32_t)BKP_BASE;
|
|
tmp += BKP_DR;
|
|
|
|
*(__IO uint32_t *) tmp = Data;
|
|
}
|
|
|
|
/**
|
|
* @brief Reads data from the specified Data Backup Register.
|
|
* @param BKP_DR: specifies the Data Backup Register.
|
|
* This parameter can be BKP_DRx where x:[1, 42]
|
|
* @retval The content of the specified Data Backup Register
|
|
*/
|
|
uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR)
|
|
{
|
|
__IO uint32_t tmp = 0;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_BKP_DR(BKP_DR));
|
|
|
|
tmp = (uint32_t)BKP_BASE;
|
|
tmp += BKP_DR;
|
|
|
|
return (*(__IO uint16_t *) tmp);
|
|
}
|
|
|
|
/**
|
|
* @brief Checks whether the Tamper Pin Event flag is set or not.
|
|
* @param None
|
|
* @retval The new state of the Tamper Pin Event flag (SET or RESET).
|
|
*/
|
|
FlagStatus BKP_GetFlagStatus(void)
|
|
{
|
|
return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB);
|
|
}
|
|
|
|
/**
|
|
* @brief Clears Tamper Pin Event pending flag.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void BKP_ClearFlag(void)
|
|
{
|
|
/* Set CTE bit to clear Tamper Pin Event flag */
|
|
BKP->CSR |= BKP_CSR_CTE;
|
|
}
|
|
|
|
/**
|
|
* @brief Checks whether the Tamper Pin Interrupt has occurred or not.
|
|
* @param None
|
|
* @retval The new state of the Tamper Pin Interrupt (SET or RESET).
|
|
*/
|
|
ITStatus BKP_GetITStatus(void)
|
|
{
|
|
return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB);
|
|
}
|
|
|
|
/**
|
|
* @brief Clears Tamper Pin Interrupt pending bit.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void BKP_ClearITPendingBit(void)
|
|
{
|
|
/* Set CTI bit to clear Tamper Pin Interrupt pending bit */
|
|
BKP->CSR |= BKP_CSR_CTI;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
|