YangChuanYu
/
RobotKernal-UESTC
forked from logzhan/RobotKernal-UESTC
1
0
Fork 0
Code Pull Requests Activity
RobotKernal-UESTC/Code/MowingRobot/pibot_ros/third_party/create_ap/lnxrouter

2132 lines
70 KiB
Plaintext
Raw Normal View History

合并部分小车上的修改
2023-12-14 23:56:56 +08:00
#!/bin/bash
VERSION=0.6.3
PROGNAME="$(basename $0)"
export LC_ALL=C
SCRIPT_UMASK=0122
umask $SCRIPT_UMASK
phead() {
echo "linux-router $VERSION (https://github.com/garywill/linux-router)"
}
usage() {
phead
cat << EOF
Released under LGPL, with no warranty. Use on your own risk.
Usage: $PROGNAME <options>
Options:
-h, --help Show this help
--version Print version number
-i <interface> Interface to make NATed sub-network,
and to provide Internet to
(To create Wifi hotspot use '--ap' instead)
-o <interface> Specify an inteface to provide Internet from.
(Note using this with default DNS option may leak
queries to other interfaces)
-n Do not provide Internet (See Notice 1)
--ban-priv Disallow clients to access my private network
-g <ip> This host's IPv4 address in subnet (mask is /24)
(example: '192.168.5.1' or '5' shortly)
-6 Enable IPv6 (NAT)
--no4 Disable IPv4 Internet (not forwarding IPv4)
(See Notice 1). Usually used with '-6'
--p6 <prefix> Set IPv6 LAN address prefix (length 64)
(example: 'fd00:0:0:5::' or '5' shortly)
Using this enables '-6'
--dns <ip>|<port>|<ip:port>
DNS server's upstream DNS.
Use ',' to seperate multiple servers
(default: use /etc/resolve.conf)
(Note IPv6 addresses need '[]' around)
--no-dns Do not serve DNS
--no-dnsmasq Disable dnsmasq server (DHCP, DNS, RA)
--catch-dns Transparent DNS proxy, redirect packets(TCP/UDP)
whose destination port is 53 to this host
--log-dns Show DNS query log
--dhcp-dns <IP1[,IP2]>|no
Set IPv4 DNS offered by DHCP (default: this host)
--dhcp-dns6 <IP1[,IP2]>|no
Set IPv6 DNS offered by DHCP (RA)
(default: this host)
(Note IPv6 addresses need '[]' around)
--hostname <name> DNS server associate this name with this host.
Use '-' to read name from /etc/hostname
-d DNS server will take into account /etc/hosts
-e <hosts_file> DNS server will take into account additional
hosts file
--mac <MAC> Set MAC address
--random-mac Use random MAC address
--tp <port> Transparent proxy,
redirect non-LAN TCP and UDP traffic to port.
(usually used with '--dns')
Wifi hotspot options:
--ap <wifi interface> <SSID>
Create Wifi access point
-p, --password <password>
Wifi password
--qr Show Wifi QR code in terminal
--hidden Hide access point (not broadcast SSID)
--no-virt Do not create virtual interface
Using this you can't use same wlan interface
for both Internet and AP
-c <channel> Channel number (default: 1)
--country <code> Set two-letter country code for regularity
(example: US)
--freq-band <GHz> Set frequency band: 2.4 or 5 (default: 2.4)
--driver Choose your WiFi adapter driver (default: nl80211)
-w <WPA version> '2' for WPA2, '1' for WPA, '1+2' for both
(default: 2)
--psk Use 64 hex digits pre-shared-key instead of
passphrase
--mac-filter Enable Wifi hotspot MAC address filtering
--mac-filter-accept Location of Wifi hotspot MAC address filter list
(defaults to /etc/hostapd/hostapd.accept)
--hostapd-debug <level> 1 or 2. Passes -d or -dd to hostapd
--isolate-clients Disable wifi communication between clients
--ieee80211n Enable IEEE 802.11n (HT)
--ieee80211ac Enable IEEE 802.11ac (VHT)
--ht_capab <HT> HT capabilities (default: [HT40+])
--vht_capab <VHT> VHT capabilities
--no-haveged Do not run haveged automatically when needed
Instance managing:
--daemon Run in background
-l, --list-running Show running instances
--lc, --list-clients <id|interface>
List clients of an instance. Or list neighbors of
an interface, even if it isn't handled by us.
(passive mode)
--stop <id> Stop a running instance
For <id> you can use PID or subnet interface name.
You can get them with '--list-running'
Notice 1: This script assume your host's default policy won't forward
packets, so the script won't explictly ban forwarding in any
mode. In some unexpected case may cause unwanted packets
leakage between 2 networks, which you should be aware of if you
want isolated network
Examples:
$PROGNAME -i eth1
$PROGNAME --ap wlan0 MyAccessPoint
$PROGNAME --ap wlan0 MyAccessPoint -p MyPassPhrase
$PROGNAME -i eth1 --tp <transparent-proxy> --dns <dns-proxy>
EOF
}
check_empty_option(){
if [[ "$1" == "" ]]; then
usage
exit 0
fi
}
define_global_variables(){
# user options
GATEWAY= # IPv4 address for this host
PREFIX6= # IPv6 LAN address prefix for this host
IID6=1 # IPv6 LAN ID for this host
IPV6=0 # enable ipv6
NO4=0 # no IPv4 Internet
BANLAN=0 # ban clients from accessing private addresses
DHCP_DNS=gateway # which ipv4 DNS the DHCP gives clients
DHCP_DNS6=gateway # which ipv6 DNS the DHCP gives clients
dnsmasq_NO_DNS=0 # disable dns server
NO_DNSMASQ=0 # disable dnsmasq (dns and dhcp)
CATCH_DNS=0 # catch clients 53 port packets
SHOW_DNS_QUERY=0 # log dns
ETC_HOSTS=0
ADDN_HOSTS=
CONN_IFACE= # which interface user choose to use to create network
INTERNET_IFACE= # which interface to get Internet from
THISHOSTNAME= # this host's name the DNS tells clients
TP_PORT= # transparent proxy port
DNS= # upstream DNS
MAC_USE_RANDOM=0
NEW_MACADDR=
DAEMONIZE=0
# script variables
SUBNET_IFACE= # which interface to create network
SHARE_METHOD=nat
OLD_MACADDR=
##### wifi hotspot
# user options
HIDDEN=0 # hidden wifi hotspot
WIFI_IFACE=
CHANNEL=default
WPA_VERSION=2
MAC_FILTER=0
MAC_FILTER_ACCEPT=/etc/hostapd/hostapd.accept
IEEE80211N=0
IEEE80211AC=0
HT_CAPAB='[HT40+]'
VHT_CAPAB=
DRIVER=nl80211
NO_VIRT=0 # not use virtual interface
COUNTRY=
FREQ_BAND=2.4
NO_HAVEGED=0
HOSTAPD_DEBUG_ARGS=
USE_PSK=0
ISOLATE_CLIENTS=0
QR=0 # show wifi qr
# script variables
VWIFI_IFACE= # virtual wifi interface name, if created
AP_IFACE= # can be VWIFI_IFACE or WIFI_IFACE
USE_IWCONFIG=0 # some device can't use iw
#######
#-- to deal with info of a running instance. then will exit
LIST_RUNNING=0
STOP_ID=
LIST_CLIENTS_ID=
# -- variables for running
CONFDIR=
NM_RUNNING=0
NM_UNM_LIST= # it's called "list" but for now one interface
}
parse_user_options(){
while [[ -n "$1" ]]; do
case "$1" in
-h|--help)
usage
exit 0
;;
--version)
echo "$VERSION"
exit 0
;;
-i)
shift
CONN_IFACE="$1"
shift
;;
-o)
shift
INTERNET_IFACE="$1"
shift
echo ""
echo "WARN: Since you're using in this mode, make sure you've read Notice 1" >&2
echo ""
;;
-n)
shift
SHARE_METHOD=none
echo ""
echo "WARN: Since you're using in this mode, make sure you've read Notice 1" >&2
echo ""
;;
--ban-priv)
shift
BANLAN=1
;;
--tp)
shift
TP_PORT="$1"
SHARE_METHOD=redsocks
shift
;;
-g)
shift
GATEWAY="$1"
shift
;;
-6)
shift
IPV6=1
;;
--no4)
shift
NO4=1
echo ""
echo "WARN: Since you're using in this mode, make sure you've read Notice 1" >&2
echo ""
;;
--p6)
shift
PREFIX6="$1"
IPV6=1
shift
;;
--mac)
shift
NEW_MACADDR="$1"
shift
;;
--random-mac)
shift
MAC_USE_RANDOM=1
;;
--dns)
shift
DNS="$1"
shift
;;
--no-dns)
shift
dnsmasq_NO_DNS=1
;;
--no-dnsmasq)
shift
NO_DNSMASQ=1
;;
--dhcp-dns)
shift
DHCP_DNS="$1"
shift
;;
--dhcp-dns6)
shift
DHCP_DNS6="$1"
shift
;;
--catch-dns)
shift
CATCH_DNS=1
;;
--log-dns)
shift
SHOW_DNS_QUERY=1
;;
--hostname)
shift
THISHOSTNAME="$1"
shift
;;
-d)
shift
ETC_HOSTS=1
;;
-e)
shift
ADDN_HOSTS="$1"
shift
;;
--isolate-clients)
shift
ISOLATE_CLIENTS=1
;;
--ap)
shift
WIFI_IFACE="$1"
shift
SSID="$1"
shift
;;
-p|--password)
shift
PASSPHRASE="$1"
shift
;;
--qr)
shift
QR=1
;;
--hidden)
shift
HIDDEN=1
;;
--mac-filter)
shift
MAC_FILTER=1
;;
--mac-filter-accept)
shift
MAC_FILTER_ACCEPT="$1"
shift
;;
-c)
shift
CHANNEL="$1"
shift
;;
-w)
shift
WPA_VERSION="$1"
[[ "$WPA_VERSION" == "2+1" ]] && WPA_VERSION=1+2
shift
;;
--ieee80211n)
shift
IEEE80211N=1
;;
--ieee80211ac)
shift
IEEE80211AC=1
;;
--ht_capab)
shift
HT_CAPAB="$1"
shift
;;
--vht_capab)
shift
VHT_CAPAB="$1"
shift
;;
--driver)
shift
DRIVER="$1"
shift
;;
--no-virt)
shift
NO_VIRT=1
;;
--country)
shift
COUNTRY="$1"
shift
;;
--freq-band)
shift
FREQ_BAND="$1"
shift
;;
--no-haveged)
shift
NO_HAVEGED=1
;;
--hostapd-debug)
shift
if [ "x$1" = "x1" ]; then
HOSTAPD_DEBUG_ARGS="-d"
elif [ "x$1" = "x2" ]; then
HOSTAPD_DEBUG_ARGS="-dd"
else
printf "Error: argument for --hostapd-debug expected 1 or 2, got %s\n" "$1"
exit 1
fi
shift
;;
--psk)
shift
USE_PSK=1
;;
--daemon)
shift
DAEMONIZE=1
;;
--stop)
shift
STOP_ID="$1"
shift
;;
-l|--list-running)
shift
LIST_RUNNING=1
;;
--lc|--list-clients)
shift
LIST_CLIENTS_ID="$1"
shift
;;
*)
echo "Invalid parameter: $1" 1>&2
exit 1
;;
esac
done
}
# seperate ip and port
sep_ip_port() {
# usage: sep_ip_port <ip:port> <var for ip> <var for port>
# input <ip:port> can be:
# port (ip is 127.0.0.1)
# ipv4
# [ipv6]
# ipv4:port
# [ipv6]:port
local IP
local PORT
local INPUT
INPUT="$1"
if (echo "$INPUT" | grep '\.' >/dev/null 2>&1) ;then
if (echo "$INPUT" | grep ':' >/dev/null 2>&1) ;then
# ipv4 + port
IP="$(echo $INPUT | cut -d: -f1)"
PORT="$(echo $INPUT | cut -d: -f2)"
else
# ipv4
IP="$INPUT"
fi
elif (echo "$INPUT" | grep '\]' >/dev/null 2>&1) ;then
if (echo "$INPUT" | grep '\]\:' >/dev/null 2>&1) ;then
# ipv6 + port
IP="$(echo $INPUT | cut -d']' -f1 | cut -d'[' -f2)"
PORT="$(echo $INPUT | cut -d']' -f2 |cut -d: -f2)"
else
# ipv6
IP="$(echo $INPUT | cut -d']' -f1 | cut -d'[' -f2)"
fi
else
# port
IP='127.0.0.1'
PORT="$INPUT"
fi
printf -v "$2" %s "$IP"
printf -v "$3" %s "$PORT"
}
#=========================
is_interface() {
[[ -z "$1" ]] && return 1
[[ -d "/sys/class/net/${1}" ]]
}
get_interface_phy_device() { # only for wifi interface
local x
for x in /sys/class/ieee80211/*; do
[[ ! -e "$x" ]] && continue
if [[ "${x##*/}" = "$1" ]]; then
echo "$1"
return 0
elif [[ -e "$x/device/net/$1" ]]; then
echo ${x##*/}
return 0
elif [[ -e "$x/device/net:$1" ]]; then
echo ${x##*/}
return 0
fi
done
echo "Failed to get phy interface" >&2
return 1
}
get_adapter_info() { # only for wifi interface
local iPHY
iPHY=$(get_interface_phy_device "$1")
[[ $? -ne 0 ]] && return 1
iw phy $iPHY info
}
get_adapter_kernel_module() {
local MODULE
MODULE=$(readlink -f "/sys/class/net/$1/device/driver/module")
echo ${MODULE##*/}
}
can_be_sta_and_ap() {
# iwconfig does not provide this information, assume false
[[ $USE_IWCONFIG -eq 1 ]] && return 1
if [[ "$(get_adapter_kernel_module "$1")" == "brcmfmac" ]]; then
echo "WARN: brmfmac driver doesn't work properly with virtual interfaces and" >&2
echo " it can cause kernel panic. For this reason we disallow virtual" >&2
echo " interfaces for your adapter." >&2
echo " For more info: https://github.com/oblique/create_ap/issues/203" >&2
return 1
fi
get_adapter_info "$1" | grep -E '{.* managed.* AP.*}' > /dev/null 2>&1 && return 0
get_adapter_info "$1" | grep -E '{.* AP.* managed.*}' > /dev/null 2>&1 && return 0
return 1
}
can_be_ap() {
# iwconfig does not provide this information, assume true
[[ $USE_IWCONFIG -eq 1 ]] && return 0
get_adapter_info "$1" | grep -E '\* AP$' > /dev/null 2>&1 && return 0
return 1
}
can_transmit_to_channel() {
local IFACE CHANNEL_NUM CHANNEL_INFO
IFACE=$1
CHANNEL_NUM=$2
if [[ $USE_IWCONFIG -eq 0 ]]; then
if [[ $FREQ_BAND == 2.4 ]]; then
CHANNEL_INFO=$(get_adapter_info ${IFACE} | grep " 24[0-9][0-9] MHz \[${CHANNEL_NUM}\]")
else
CHANNEL_INFO=$(get_adapter_info ${IFACE} | grep " \(49[0-9][0-9]\|5[0-9]\{3\}\) MHz \[${CHANNEL_NUM}\]")
fi
[[ -z "${CHANNEL_INFO}" ]] && return 1
[[ "${CHANNEL_INFO}" == *no\ IR* ]] && return 1
[[ "${CHANNEL_INFO}" == *disabled* ]] && return 1
return 0
else
CHANNEL_NUM=$(printf '%02d' ${CHANNEL_NUM})
CHANNEL_INFO=$(iwlist ${IFACE} channel | grep -E "Channel[[:blank:]]${CHANNEL_NUM}[[:blank:]]?:")
[[ -z "${CHANNEL_INFO}" ]] && return 1
return 0
fi
}
# taken from iw/util.c
ieee80211_frequency_to_channel() {
local FREQ=$1
if [[ $FREQ -eq 2484 ]]; then
echo 14
elif [[ $FREQ -lt 2484 ]]; then
echo $(( ($FREQ - 2407) / 5 ))
elif [[ $FREQ -ge 4910 && $FREQ -le 4980 ]]; then
echo $(( ($FREQ - 4000) / 5 ))
elif [[ $FREQ -le 45000 ]]; then
echo $(( ($FREQ - 5000) / 5 ))
elif [[ $FREQ -ge 58320 && $FREQ -le 64800 ]]; then
echo $(( ($FREQ - 56160) / 2160 ))
else
echo 0
fi
}
is_5ghz_frequency() {
[[ $1 =~ ^(49[0-9]{2})|(5[0-9]{3})$ ]]
}
is_interface_wifi_connected() {
if [[ $USE_IWCONFIG -eq 0 ]]; then
iw dev "$1" link 2>&1 | grep -E '^Connected to' > /dev/null 2>&1 && return 0
else
iwconfig "$1" 2>&1 | grep -E 'Access Point: [0-9a-fA-F]{2}:' > /dev/null 2>&1 && return 0
fi
return 1
}
is_unicast_macaddr() {
local x
x=$(echo "$1" | cut -d: -f1)
x=$(printf '%d' "0x${x}")
[[ $(expr $x % 2) -eq 0 ]]
}
get_interface_mac() {
is_interface "$1" || return
cat "/sys/class/net/${1}/address"
}
alloc_new_vface_name() { # only for wifi
local i=0
local v_iface_name=
while :; do
v_iface_name="x$i${WIFI_IFACE}"
if ! is_interface ${v_iface_name} && [[ ! -f $COMMON_CONFDIR/vfaces/${v_iface_name} ]]; then
mkdir -p $COMMON_CONFDIR/vfaces
touch $COMMON_CONFDIR/vfaces/${v_iface_name}
echo "${v_iface_name}"
return
fi
i=$((i + 1))
done
}
dealloc_vface_name() {
rm -f $COMMON_CONFDIR/vfaces/$1
}
#======
get_all_mac_in_system() {
cat /sys/class/net/*/address
}
get_new_macaddr_according_to_existing() {
local REALDEV OLDMAC NEWMAC LAST_BYTE i
REALDEV=$1
OLDMAC=$(get_interface_mac "$REALDEV")
NEWMAC=""
LAST_BYTE=$(printf %d 0x${OLDMAC##*:})
for i in {10..240}; do
NEWMAC="${OLDMAC%:*}:$(printf %02x $(( ($LAST_BYTE + $i) % 256 )))"
(get_all_mac_in_system | grep "$NEWMAC" > /dev/null 2>&1) || break
done
echo "$NEWMAC"
}
generate_random_mac() {
local r1 r2 r3 r4 r5 r6
local RAND_MAC
while :; do
r1=$( printf "%02x" $(($RANDOM%256/4*4)) )
r2=$( printf "%02x" $(($RANDOM%256)) )
r3=$( printf "%02x" $(($RANDOM%256)) )
r4=$( printf "%02x" $(($RANDOM%256)) )
r5=$( printf "%02x" $(($RANDOM%256)) )
r6=$( printf "%02x" $(($RANDOM%256)) )
RAND_MAC="$r1:$r2:$r3:$r4:$r5:$r6"
( ! ip link | grep "link" | grep $RAND_MAC > /dev/null 2>&1 ) && \
( ! ip maddress | grep "link" | grep $RAND_MAC > /dev/null 2>&1 ) && \
( ! ip neigh | grep "lladdr $RAND_MAC" > /dev/null 2>&1 ) && \
( ! get_all_mac_in_system | grep $RAND_MAC ) && \
break
done
echo "$RAND_MAC"
}
is_ip4_lan_range_available() { # checks 192.168.x.x
( ip -4 address | grep "inet 192\.168\.$1\." > /dev/null 2>&1 ) && return 1
( ip -4 route | grep "^192\.168\.$1\." > /dev/null 2>&1 ) && return 1
( ip -4 route get 192.168.$1.0 2>&1 | grep -E "\bvia\b|\bunreachable\b" > /dev/null 2>&1 ) && \
( ip -4 route get 192.168.$1.255 2>&1 | grep -E "\bvia\b|\bunreachable\b" > /dev/null 2>&1 ) && return 0
return 1
}
is_ip6_lan_range_available() { # checks fdxx::
( ip -6 address | grep -i "inet6 fd$1:$2$3:$4$5:$6$7:" > /dev/null 2>&1 ) && return 1
( ip -6 route | grep -i "^fd$1:$2$3:$4$5:$6$7:" > /dev/null 2>&1 ) && return 1
( ip -6 route get fd$1:$2$3:$4$5:$6$7:: 2>&1 | grep -E "\bvia\b|\bunreachable\b" > /dev/null 2>&1 ) && \
( ip -6 route get fd$1:$2$3:$4$5:$6$7:ffff:ffff:ffff:ffff 2>&1 | grep -E "\bvia\b|\bunreachable\b" > /dev/null 2>&1 ) && return 0
return 1
}
generate_random_ip4() {
local random_ip4
while :; do
random_ip4=$(($RANDOM%256))
is_ip4_lan_range_available $random_ip4 && break
done
echo "192.168.$random_ip4.1"
}
generate_random_lan_ip6_prefix() {
local r1 r2 r3 r4 r5 r6 r7
while :; do
r1=$( printf "%x" $(($RANDOM%240+16)) )
r2=$( printf "%x" $(($RANDOM%240+16)) )
r3=$( printf "%x" $(($RANDOM%240+16)) )
r4=$( printf "%x" $(($RANDOM%240+16)) )
r5=$( printf "%x" $(($RANDOM%240+16)) )
r6=$( printf "%x" $(($RANDOM%240+16)) )
r7=$( printf "%x" $(($RANDOM%240+16)) )
is_ip6_lan_range_available $r1 $r2 $r3 $r4 $r5 $r6 $r7 && break
done
echo "fd$r1:$r2$r3:$r4$r5:$r6$r7::"
}
# start haveged when needed
haveged_watchdog() {
local show_warn=1
while :; do
if [[ $(cat /proc/sys/kernel/random/entropy_avail) -lt 1000 ]]; then
if ! which haveged > /dev/null 2>&1; then
if [[ $show_warn -eq 1 ]]; then
echo "WARN: Low entropy detected. We recommend you to install \`haveged'" 1>&2
show_warn=0
fi
elif ! pidof haveged > /dev/null 2>&1; then # TODO judge zombie ?
echo "Low entropy detected, starting haveged" 1>&2
# boost low-entropy
haveged -w 1024 -p $COMMON_CONFDIR/haveged.pid
fi
fi
sleep 2
done
}
pid_watchdog() {
local PID="$1"
local SLEEP="$2"
local ERR_MSG="$3"
local ST
while true
do
if [[ -e "/proc/$PID" ]]; then
ST="$(cat "/proc/$PID/status" | grep "^State:" | awk '{print $2}')"
if [[ "$ST" != 'Z' ]]; then
sleep $SLEEP
continue
fi
fi
die "$ERR_MSG"
done
}
#========
# only support NetworkManager >= 0.9.9
is_nm_running() {
if (which nmcli >/dev/null 2>&1 ) && (nmcli -t -f RUNNING g 2>&1 | grep -E '^running$' >/dev/null 2>&1 ) ; then
echo 1
else
echo 0
fi
}
nm_knows() {
(nmcli dev show $1 | grep -E "^GENERAL.STATE:" >/dev/null 2>&1 ) && return 0 # nm sees
return 1 # nm doesn't see this interface
}
nm_get_manage() { # get an interface's managed state
local s
s=$(nmcli dev show $1 | grep -E "^GENERAL.STATE:") || return 2 # no such interface
(echo $s | grep "unmanaged" >/dev/null 2>&1) && return 1 # unmanaged
return 0 # managed
}
nm_set_unmanaged() {
while ! nm_knows $1 ; do # wait for virtual wifi interface seen by NM
sleep 0.5
done
if nm_get_manage $1 ;then
echo "Set $1 unmanaged by NetworkManager"
nmcli dev set $1 managed no || die "Failed to set $1 unmanaged by NetworkManager"
NM_UNM_LIST=$1
sleep 1
fi
}
nm_set_managed() {
nmcli dev set $1 managed yes
NM_UNM_LIST=
}
nm_restore_manage() {
if [[ $NM_UNM_LIST ]]; then
echo "Restore $NM_UNM_LIST managed by NetworkManager"
nm_set_managed $NM_UNM_LIST
sleep 0.5
fi
}
#=========
check_iptables()
{
echo
iptables --version
if which firewall-cmd > /dev/null 2>&1; then
if [[ "$(firewall-cmd --state)" == "running" ]]; then
echo "firewalld is running ($(firewall-cmd --version))"
#echo "firewalld version "
fi
fi
}
iptables_()
{
# NETFILTER_XT_MATCH_COMMENT would be a env variable if user wants to disable '-m comment'
if [[ "$NETFILTER_XT_MATCH_COMMENT" == "0" ]]; then
iptables -w $@
else
iptables -w $@ -m comment --comment "lnxrouter-$$-$SUBNET_IFACE"
fi
return $?
}
ip6tables_()
{
if [[ "$NETFILTER_XT_MATCH_COMMENT" == "0" ]]; then
ip6tables -w $@
else
ip6tables -w $@ -m comment --comment "lnxrouter-$$-$SUBNET_IFACE"
fi
return $?
}
start_nat() {
if [[ $INTERNET_IFACE ]]; then
IPTABLES_NAT_OUT="-o ${INTERNET_IFACE}"
IPTABLES_NAT_IN="-i ${INTERNET_IFACE}"
MASQUERADE_NOTOUT=""
else
MASQUERADE_NOTOUT="! -o ${SUBNET_IFACE}"
fi
echo
echo "iptables: NAT "
if [[ $NO4 -eq 0 ]]; then
iptables_ -v -t nat -I POSTROUTING -s ${GATEWAY%.*}.0/24 $IPTABLES_NAT_OUT $MASQUERADE_NOTOUT ! -d ${GATEWAY%.*}.0/24 -j MASQUERADE || die
iptables_ -v -I FORWARD -i ${SUBNET_IFACE} $IPTABLES_NAT_OUT -s ${GATEWAY%.*}.0/24 -j ACCEPT || die
iptables_ -v -I FORWARD -o ${SUBNET_IFACE} $IPTABLES_NAT_IN -d ${GATEWAY%.*}.0/24 -j ACCEPT || die
fi
if [[ $IPV6 -eq 1 ]]; then
ip6tables_ -v -t nat -I POSTROUTING -s ${PREFIX6}/64 $IPTABLES_NAT_OUT $MASQUERADE_NOTOUT ! -d ${PREFIX6}/64 -j MASQUERADE || die
ip6tables_ -v -I FORWARD -i ${SUBNET_IFACE} $IPTABLES_NAT_OUT -s ${PREFIX6}/64 -j ACCEPT || die
ip6tables_ -v -I FORWARD -o ${SUBNET_IFACE} $IPTABLES_NAT_IN -d ${PREFIX6}/64 -j ACCEPT || die
fi
}
stop_nat() {
echo "iptables: stop NAT"
if [[ $NO4 -eq 0 ]]; then
iptables_ -t nat -D POSTROUTING -s ${GATEWAY%.*}.0/24 $IPTABLES_NAT_OUT $MASQUERADE_NOTOUT ! -d ${GATEWAY%.*}.0/24 -j MASQUERADE
iptables_ -D FORWARD -i ${SUBNET_IFACE} $IPTABLES_NAT_OUT -s ${GATEWAY%.*}.0/24 -j ACCEPT
iptables_ -D FORWARD -o ${SUBNET_IFACE} $IPTABLES_NAT_IN -d ${GATEWAY%.*}.0/24 -j ACCEPT
fi
if [[ $IPV6 -eq 1 ]]; then
ip6tables_ -t nat -D POSTROUTING -s ${PREFIX6}/64 $IPTABLES_NAT_OUT $MASQUERADE_NOTOUT ! -d ${PREFIX6}/64 -j MASQUERADE
ip6tables_ -D FORWARD -i ${SUBNET_IFACE} $IPTABLES_NAT_OUT -s ${PREFIX6}/64 -j ACCEPT
ip6tables_ -D FORWARD -o ${SUBNET_IFACE} $IPTABLES_NAT_IN -d ${PREFIX6}/64 -j ACCEPT
fi
}
start_ban_lan() {
echo
echo "iptables: Disallow clients to access LAN"
iptables_ -N BANLAN-f-${SUBNET_IFACE} || die
iptables_ -v -I BANLAN-f-${SUBNET_IFACE} -d 0.0.0.0/8 -j REJECT || die # TODO: use array
iptables_ -v -I BANLAN-f-${SUBNET_IFACE} -d 10.0.0.0/8 -j REJECT || die
iptables_ -v -I BANLAN-f-${SUBNET_IFACE} -d 100.64.0.0/10 -j REJECT || die
iptables_ -v -I BANLAN-f-${SUBNET_IFACE} -d 127.0.0.0/8 -j REJECT || die
iptables_ -v -I BANLAN-f-${SUBNET_IFACE} -d 169.254.0.0/16 -j REJECT || die
iptables_ -v -I BANLAN-f-${SUBNET_IFACE} -d 172.16.0.0/12 -j REJECT || die
iptables_ -v -I BANLAN-f-${SUBNET_IFACE} -d 192.168.0.0/16 -j REJECT || die
iptables_ -v -I BANLAN-f-${SUBNET_IFACE} -d 224.0.0.0/4 -j REJECT || die
iptables_ -v -I BANLAN-f-${SUBNET_IFACE} -d 255.255.255.255 -j REJECT || die
iptables_ -I FORWARD -i ${SUBNET_IFACE} -j BANLAN-f-${SUBNET_IFACE} || die
iptables_ -N BANLAN-i-${SUBNET_IFACE}
#iptables_ -v -I BANLAN-i-${SUBNET_IFACE} -i ${SUBNET_IFACE} -j REJECT || die
iptables_ -v -I BANLAN-i-${SUBNET_IFACE} -i ${SUBNET_IFACE} ! -p icmp -j REJECT || die
# TODO: ipv6 need icmp to function. maybe we can block some unneeded icmp to improve security
iptables_ -I INPUT -i ${SUBNET_IFACE} -j BANLAN-i-${SUBNET_IFACE} || die
if [[ $IPV6 -eq 1 ]]; then
ip6tables_ -N BANLAN-f-${SUBNET_IFACE} || die
ip6tables_ -v -I BANLAN-f-${SUBNET_IFACE} -d fc00::/7 -j REJECT || die
ip6tables_ -v -I BANLAN-f-${SUBNET_IFACE} -d fe80::/10 -j REJECT || die
ip6tables_ -v -I BANLAN-f-${SUBNET_IFACE} -d ff00::/8 -j REJECT || die
ip6tables_ -v -I BANLAN-f-${SUBNET_IFACE} -d ::1 -j REJECT || die
ip6tables_ -v -I BANLAN-f-${SUBNET_IFACE} -d ::/128 -j REJECT || die
ip6tables_ -v -I BANLAN-f-${SUBNET_IFACE} -d ::ffff:0:0/96 -j REJECT || die
ip6tables_ -v -I BANLAN-f-${SUBNET_IFACE} -d ::ffff:0:0:0/96 -j REJECT || die
ip6tables_ -I FORWARD -i ${SUBNET_IFACE} -j BANLAN-f-${SUBNET_IFACE} || die
ip6tables_ -N BANLAN-i-${SUBNET_IFACE} || die
#ip6tables_ -v -I BANLAN-i-${SUBNET_IFACE} -i ${SUBNET_IFACE} -j REJECT || die
ip6tables_ -v -I BANLAN-i-${SUBNET_IFACE} -i ${SUBNET_IFACE} ! -p icmpv6 -j REJECT || die
ip6tables_ -I INPUT -i ${SUBNET_IFACE} -j BANLAN-i-${SUBNET_IFACE} || die
fi
}
stop_ban_lan() {
echo "iptables: Unban clients' LAN access"
iptables_ -D FORWARD -i ${SUBNET_IFACE} -j BANLAN-f-${SUBNET_IFACE}
iptables_ -F BANLAN-f-${SUBNET_IFACE}
iptables_ -X BANLAN-f-${SUBNET_IFACE}
iptables_ -D INPUT -i ${SUBNET_IFACE} -j BANLAN-i-${SUBNET_IFACE}
iptables_ -F BANLAN-i-${SUBNET_IFACE}
iptables_ -X BANLAN-i-${SUBNET_IFACE}
if [[ $IPV6 -eq 1 ]]; then
ip6tables_ -D FORWARD -i ${SUBNET_IFACE} -j BANLAN-f-${SUBNET_IFACE}
ip6tables_ -F BANLAN-f-${SUBNET_IFACE}
ip6tables_ -X BANLAN-f-${SUBNET_IFACE}
ip6tables_ -D INPUT -i ${SUBNET_IFACE} -j BANLAN-i-${SUBNET_IFACE}
ip6tables_ -F BANLAN-i-${SUBNET_IFACE}
ip6tables_ -X BANLAN-i-${SUBNET_IFACE}
fi
}
allow_dns_port() {
echo
echo "iptables: allow DNS"
iptables_ -v -I INPUT -i ${SUBNET_IFACE} -s ${GATEWAY%.*}.0/24 -d ${GATEWAY} -p tcp -m tcp --dport 53 -j ACCEPT || die
iptables_ -v -I INPUT -i ${SUBNET_IFACE} -s ${GATEWAY%.*}.0/24 -d ${GATEWAY} -p udp -m udp --dport 53 -j ACCEPT || die
if [[ $IPV6 -eq 1 ]]; then
ip6tables_ -v -I INPUT -i ${SUBNET_IFACE} -s ${PREFIX6}/64 -d ${GATEWAY6} -p tcp -m tcp --dport 53 -j ACCEPT || die
ip6tables_ -v -I INPUT -i ${SUBNET_IFACE} -s ${PREFIX6}/64 -d ${GATEWAY6} -p udp -m udp --dport 53 -j ACCEPT || die
fi
}
unallow_dns_port() {
echo "iptables: unallow DNS"
iptables_ -D INPUT -i ${SUBNET_IFACE} -s ${GATEWAY%.*}.0/24 -d ${GATEWAY} -p tcp -m tcp --dport 53 -j ACCEPT
iptables_ -D INPUT -i ${SUBNET_IFACE} -s ${GATEWAY%.*}.0/24 -d ${GATEWAY} -p udp -m udp --dport 53 -j ACCEPT
if [[ $IPV6 -eq 1 ]]; then
ip6tables_ -D INPUT -i ${SUBNET_IFACE} -s ${PREFIX6}/64 -d ${GATEWAY6} -p tcp -m tcp --dport 53 -j ACCEPT
ip6tables_ -D INPUT -i ${SUBNET_IFACE} -s ${PREFIX6}/64 -d ${GATEWAY6} -p udp -m udp --dport 53 -j ACCEPT
fi
}
start_catch_dns() {
echo
echo "iptables: redirect all TCP/UDP packet that destination port is 53"
iptables_ -v -t nat -I PREROUTING -i ${SUBNET_IFACE} ! -d ${GATEWAY} -p udp -m udp --dport 53 -j REDIRECT --to-ports 53 || die
iptables_ -v -t nat -I PREROUTING -i ${SUBNET_IFACE} ! -d ${GATEWAY} -p tcp -m tcp --dport 53 -j REDIRECT --to-ports 53 || die
if [[ $IPV6 -eq 1 ]]; then
ip6tables_ -v -t nat -I PREROUTING -i ${SUBNET_IFACE} ! -d ${GATEWAY6} -p udp -m udp --dport 53 -j REDIRECT --to-ports 53 || die
ip6tables_ -v -t nat -I PREROUTING -i ${SUBNET_IFACE} ! -d ${GATEWAY6} -p tcp -m tcp --dport 53 -j REDIRECT --to-ports 53 || die
fi
}
stop_catch_dns() {
echo "iptables: stop redirecting DNS queries"
iptables_ -t nat -D PREROUTING -i ${SUBNET_IFACE} ! -d ${GATEWAY} -p udp -m udp --dport 53 -j REDIRECT --to-ports 53
iptables_ -t nat -D PREROUTING -i ${SUBNET_IFACE} ! -d ${GATEWAY} -p tcp -m tcp --dport 53 -j REDIRECT --to-ports 53
if [[ $IPV6 -eq 1 ]]; then
ip6tables_ -t nat -D PREROUTING -i ${SUBNET_IFACE} ! -d ${GATEWAY6} -p udp -m udp --dport 53 -j REDIRECT --to-ports 53
ip6tables_ -t nat -D PREROUTING -i ${SUBNET_IFACE} ! -d ${GATEWAY6} -p tcp -m tcp --dport 53 -j REDIRECT --to-ports 53
fi
}
allow_dhcp() {
echo
echo "iptables: allow dhcp"
iptables_ -v -I INPUT -i ${SUBNET_IFACE} -p udp -m udp --dport 67 -j ACCEPT || die
if [[ $IPV6 -eq 1 ]]; then
ip6tables_ -v -I INPUT -i ${SUBNET_IFACE} -p udp -m udp --dport 547 -j ACCEPT || die
fi
}
unallow_dhcp() {
echo "iptables: unallow dhcp"
iptables_ -D INPUT -i ${SUBNET_IFACE} -p udp -m udp --dport 67 -j ACCEPT
if [[ $IPV6 -eq 1 ]]; then
ip6tables_ -D INPUT -i ${SUBNET_IFACE} -p udp -m udp --dport 547 -j ACCEPT
fi
}
# TODO: use 'DNAT' instead of '--to-ports' to support other IP
start_redsocks() {
echo
echo "iptables: transparent proxy non-LAN TCP/UDP traffic to port ${TP_PORT}"
if [[ $NO4 -eq 0 ]]; then
iptables_ -t nat -N REDSOCKS-${SUBNET_IFACE} || die
iptables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d 0.0.0.0/8 -j RETURN || die
iptables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d 10.0.0.0/8 -j RETURN || die
iptables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d 100.64.0.0/10 -j RETURN || die
iptables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d 127.0.0.0/8 -j RETURN || die
iptables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d 169.254.0.0/16 -j RETURN || die
iptables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d 172.16.0.0/12 -j RETURN || die
iptables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d 192.168.0.0/16 -j RETURN || die
iptables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d 224.0.0.0/4 -j RETURN || die
iptables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d 255.255.255.255 -j RETURN || die
iptables_ -v -t nat -A REDSOCKS-${SUBNET_IFACE} -p tcp -j REDIRECT --to-ports ${TP_PORT} || die
iptables_ -v -t nat -A REDSOCKS-${SUBNET_IFACE} -p udp -j REDIRECT --to-ports ${TP_PORT} || die
iptables_ -v -t nat -I PREROUTING -i ${SUBNET_IFACE} -s ${GATEWAY%.*}.0/24 -j REDSOCKS-${SUBNET_IFACE} || die
iptables_ -v -I INPUT -i ${SUBNET_IFACE} -s ${GATEWAY%.*}.0/24 -p tcp -m tcp --dport ${TP_PORT} -j ACCEPT || die
iptables_ -v -I INPUT -i ${SUBNET_IFACE} -s ${GATEWAY%.*}.0/24 -p udp -m udp --dport ${TP_PORT} -j ACCEPT || die
fi
if [[ $IPV6 -eq 1 ]]; then
ip6tables_ -t nat -N REDSOCKS-${SUBNET_IFACE} || die
ip6tables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d fc00::/7 -j RETURN || die
ip6tables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d fe80::/10 -j RETURN || die
ip6tables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d ff00::/8 -j RETURN || die
ip6tables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d ::1 -j RETURN || die
ip6tables_ -t nat -A REDSOCKS-${SUBNET_IFACE} -d :: -j RETURN || die
ip6tables_ -v -t nat -A REDSOCKS-${SUBNET_IFACE} -p tcp -j REDIRECT --to-ports ${TP_PORT} || die
ip6tables_ -v -t nat -A REDSOCKS-${SUBNET_IFACE} -p udp -j REDIRECT --to-ports ${TP_PORT} || die
ip6tables_ -v -t nat -I PREROUTING -i ${SUBNET_IFACE} -s ${PREFIX6}/64 -j REDSOCKS-${SUBNET_IFACE} || die
ip6tables_ -v -I INPUT -i ${SUBNET_IFACE} -s ${PREFIX6}/64 -p tcp -m tcp --dport ${TP_PORT} -j ACCEPT || die
ip6tables_ -v -I INPUT -i ${SUBNET_IFACE} -s ${PREFIX6}/64 -p udp -m udp --dport ${TP_PORT} -j ACCEPT || die
fi
}
stop_redsocks() {
echo "iptables: stop transparent proxy"
if [[ $NO4 -eq 0 ]]; then
iptables_ -t nat -D PREROUTING -i ${SUBNET_IFACE} -s ${GATEWAY%.*}.0/24 -j REDSOCKS-${SUBNET_IFACE}
iptables_ -t nat -F REDSOCKS-${SUBNET_IFACE}
iptables_ -t nat -X REDSOCKS-${SUBNET_IFACE}
iptables_ -D INPUT -i ${SUBNET_IFACE} -s ${GATEWAY%.*}.0/24 -p tcp -m tcp --dport ${TP_PORT} -j ACCEPT
iptables_ -D INPUT -i ${SUBNET_IFACE} -s ${GATEWAY%.*}.0/24 -p udp -m udp --dport ${TP_PORT} -j ACCEPT
fi
if [[ $IPV6 -eq 1 ]]; then
ip6tables_ -t nat -D PREROUTING -i ${SUBNET_IFACE} -s ${PREFIX6}/64 -j REDSOCKS-${SUBNET_IFACE}
ip6tables_ -t nat -F REDSOCKS-${SUBNET_IFACE}
ip6tables_ -t nat -X REDSOCKS-${SUBNET_IFACE}
ip6tables_ -D INPUT -i ${SUBNET_IFACE} -s ${PREFIX6}/64 -p tcp -m tcp --dport ${TP_PORT} -j ACCEPT
ip6tables_ -D INPUT -i ${SUBNET_IFACE} -s ${PREFIX6}/64 -p udp -m udp --dport ${TP_PORT} -j ACCEPT
fi
}
#---------------------------------------
backup_ipv6_bits() {
mkdir "$CONFDIR/sys_6_conf_iface" || die "Failed making dir to save interface IPv6 status"
cp "/proc/sys/net/ipv6/conf/$SUBNET_IFACE/disable_ipv6" \
"/proc/sys/net/ipv6/conf/$SUBNET_IFACE/accept_ra" \
"/proc/sys/net/ipv6/conf/$SUBNET_IFACE/use_tempaddr" \
"/proc/sys/net/ipv6/conf/$SUBNET_IFACE/addr_gen_mode" \
"$CONFDIR/sys_6_conf_iface/" || die "Failed backing up interface ipv6 bits"
if [[ "$SHARE_METHOD" == 'redsocks' ]] ; then
cp "/proc/sys/net/ipv6/conf/$SUBNET_IFACE/forwarding" \
"$CONFDIR/sys_6_conf_iface/" || die "Failed backking up interface ipv6 bits"
fi
}
set_ipv6_bits() {
if [[ $IPV6 -eq 1 ]]; then
echo 0 > "/proc/sys/net/ipv6/conf/$SUBNET_IFACE/disable_ipv6"
echo 0 > "/proc/sys/net/ipv6/conf/$SUBNET_IFACE/accept_ra"
echo 0 > "/proc/sys/net/ipv6/conf/$SUBNET_IFACE/use_tempaddr"
echo 0 > "/proc/sys/net/ipv6/conf/$SUBNET_IFACE/addr_gen_mode"
else
echo 1 > "/proc/sys/net/ipv6/conf/$SUBNET_IFACE/disable_ipv6"
fi
}
restore_ipv6_bits() {
if [[ -d "$CONFDIR/sys_6_conf_iface" ]]; then
cp -f "$CONFDIR/sys_6_conf_iface/*" "/proc/sys/net/ipv6/conf/$SUBNET_IFACE/"
fi
}
set_interface_mac() {
local INTERFACE
local MAC
INTERFACE=$1
MAC=$2
ip link set dev ${INTERFACE} address ${MAC}
}
backup_interface_status() {
# virtual wifi interface will be destroyed, so no need to save status
# backup interface up or down status
(ip link show ${SUBNET_IFACE} |grep -q "state UP") && SUBNET_IFACE_ORIGINAL_UP_STATUS=1
# save interface old mac
#if [[ -n "$NEW_MACADDR" ]]; then
OLD_MACADDR=$(get_interface_mac $SUBNET_IFACE)
#echo "Saved ${SUBNET_IFACE} old MAC address ${OLD_MACADDR} into RAM"
#fi
backup_ipv6_bits
# TODO : backup ip and others
# nm managing status is saved when nm_set_unmanaged()
}
restore_interface_status() {
# virtual wifi interface will be destroyed, so no need to restore status
# don't use [[ $VWIFI_IFACE ]] to judge, if creating virtual wifi failed, VWIFI_IFACE is empty
[[ "$WIFI_IFACE" && "$NO_VIRT" -eq 0 ]] && return
restore_ipv6_bits
if [[ -n "$OLD_MACADDR" && "$(get_interface_mac $SUBNET_IFACE)" != "$OLD_MACADDR" ]] ; then
echo "Restoring ${SUBNET_IFACE} to old MAC address ${OLD_MACADDR} ..."
set_interface_mac ${SUBNET_IFACE} ${OLD_MACADDR} || echo "Failed restoring ${SUBNET_IFACE} to old MAC address ${OLD_MACADDR}" >&2
fi
nm_restore_manage
[[ $SUBNET_IFACE_ORIGINAL_UP_STATUS -eq 1 ]] && ip link set up dev ${SUBNET_IFACE} && echo "Restore ${SUBNET_IFACE} to link up"
}
#---------------------------------------
kill_processes() { # for this instance
#echo "Killing processes"
local x pid
for x in $CONFDIR/*.pid; do
# even if the $CONFDIR is empty, the for loop will assign
# a value in $x. so we need to check if the value is a file
if [[ -f $x ]] && sleep 0.3 && [[ -f $x ]]; then
pid=$(cat $x)
pn=$( ps -p $pid -o comm= )
#echo "Killing $pid $pn ... "
pkill -P $pid
kill $pid 2>/dev/null && ( echo "Killed $pid $pn" && rm $x ) || echo "Failed to kill $pid $pn, it may have exited"
fi
done
}
_cleanup() {
local x
ip addr flush ${SUBNET_IFACE}
rm -rf $CONFDIR
ip link set down dev ${SUBNET_IFACE}
if [[ $VWIFI_IFACE ]]; then # the subnet interface (virtual wifi interface) will be removed
iw dev ${VWIFI_IFACE} del
dealloc_vface_name $VWIFI_IFACE
fi
restore_interface_status
if ! has_running_instance; then
echo "Exiting: This is the only running instance"
# kill common processes
for x in $COMMON_CONFDIR/*.pid; do
[[ -f $x ]] && kill -9 $(cat $x) && rm $x
done
rm -d $COMMON_CONFDIR/vfaces
rm -d $COMMON_CONFDIR
rm -d $TMPDIR
else
echo "Exiting: This is NOT the only running instance"
fi
}
clean_iptables() {
if [[ "$SHARE_METHOD" == "nat" ]]; then
stop_nat
elif [[ "$SHARE_METHOD" == "redsocks" ]]; then
stop_redsocks
fi
if [[ "$DHCP_DNS" == "gateway" || "$DHCP_DNS6" == "gateway" ]]; then
unallow_dns_port
fi
[[ "$CATCH_DNS" -eq 1 ]] && stop_catch_dns
if [[ $NO_DNSMASQ -eq 0 ]]; then
unallow_dhcp
fi
[[ "$BANLAN" -eq 1 ]] && stop_ban_lan
}
cleanup() {
trap "" SIGINT SIGUSR1 SIGUSR2 EXIT SIGTERM
echo
echo
echo "Doing cleanup.. "
kill_processes
clean_iptables 2> /dev/null
_cleanup 2> /dev/null
pgid=$(ps opgid= $$ |awk '{print $1}' )
kill -15 -$pgid
sleep 1
echo "Cleaning up done"
#kill -9 -$pgid
}
# NOTE function die() is designed not to be used before init_trap() executed
die() { # SIGUSR2
echo "Error occured"
[[ -n "$1" ]] && echo -e "\nERROR: $1\n" >&2
# send die signal to the main process
[[ $BASHPID -ne $$ ]] && kill -USR2 $$ || cleanup
exit 1
}
clean_exit() { # SIGUSR1
# send clean_exit signal to the main process
[[ $BASHPID -ne $$ ]] && kill -USR1 $$ || cleanup
exit 0
}
init_trap(){
trap "cleanup" EXIT
trap "clean_exit" SIGINT SIGUSR1 SIGTERM
trap "die" SIGUSR2
}
init_conf_dirs() {
mkdir -p "$TMPDIR" || die "Couldn't make linux-router's temporary dir"
chmod 755 "$TMPDIR" 2>/dev/null
cd "$TMPDIR" || die "Couldn't change directory to linux-router's temporary path"
CONFDIR="$(mktemp -d $TMPDIR/lnxrouter.${TARGET_IFACE}.conf.XXXXXX)" || die "Instance couldn't make config dir" # config dir for one instance
chmod 755 "$CONFDIR"
#echo "Config dir: $CONFDIR"
echo $$ > "$CONFDIR/pid"
COMMON_CONFDIR="$TMPDIR/lnxrouter_common.conf" # config dir for all instances
mkdir -p "$COMMON_CONFDIR"
}
#== functions to deal with running instances
list_running_conf() {
local x
for x in $TMPDIR/lnxrouter.*; do
if [[ -f $x/pid && -f $x/subn_iface && -d /proc/$(cat $x/pid) ]]; then
echo "$x"
fi
done
}
list_running() {
local IFACE subn_iface x
for x in $(list_running_conf); do
IFACE=${x#*.}
IFACE=${IFACE%%.*}
subn_iface=$(cat $x/subn_iface)
if [[ $IFACE == $subn_iface ]]; then
echo $(cat $x/pid) $IFACE
else
echo $(cat $x/pid) $IFACE '('$(cat $x/subn_iface)')'
fi
done
}
get_subn_iface_from_pid() {
list_running | awk '{print $1 " " $NF}' | tr -d '\(\)' | grep -E "^${1} " | cut -d' ' -f2
}
get_pid_from_subn_iface() {
list_running | awk '{print $1 " " $NF}' | tr -d '\(\)' | grep -E " ${1}$" | cut -d' ' -f1
}
get_confdir_from_pid() {
local IFACE x
for x in $(list_running_conf); do
if [[ $(cat $x/pid) == "$1" ]]; then
echo "$x"
break
fi
done
}
#======================================================
print_clients_from_leases() { # MAC|IP|HOST|lease
local LEASE_FILE="$1"
local FILEC
local line
local LEASEstr LEASEstamp
FILEC="$(cat "$LEASE_FILE" | grep -v -E "^duid\b" | sed -r '/^\s*$/d' )"
# TODO: duid is somewhat related to ipv6. I don't know about it. Not sure excluding it miss some info or not
echo "$FILEC" | while read line
do
#echo aa$line
LEASEstamp="$(echo "$line" | awk '{print $1}')"
MAC="$(echo "$line" | awk '{print $2}')"
IP="$(echo "$line" | awk '{print $3}' | sed 's/\[//g' | sed 's/\]//g')"
HOST="$(echo "$line" | awk '{print $4}' | sed 's/*/?/g' | sed 's/|/_/g' | sed 's/ /_/g' )"
if [[ -n "$MAC" ]]; then
LEASEstr="$(date -d @${LEASEstamp} +%m-%d_%X)"
echo "$MAC|$IP|$HOST|lease_$LEASEstr"
fi
done
}
print_interface_neighbors_via_iproute() { # MAC|IP|_|STATUS
local IFACE=$1
local line
ip n | grep -E "\bdev $IFACE\b" | sed 's/ /|/g' | while read line
do
local MAC IP STATUS
IP="$(echo $line | awk -F'|' '{print $1}')"
if [[ "$(echo $line | awk -F'|' '{print $4}')" == "lladdr" ]]; then # has mac
# if has mac, $4="lladdr" and $5=macaddress and $6+=status
MAC="$(echo $line | awk -F'|' '{print $5}')"
STATUS="$(echo $line | awk -F'|' '$1="";$2="";$3="";$4="";$5="";{print}' | awk '{$1=$1;print}'| sed 's/ /,/g')"
else # no mac
# if no mac, $4="" and $5+=status
MAC="?"
STATUS="$(echo $line | awk -F'|' '$1="";$2="";$3="";$4="";{print}' | awk '{$1=$1;print}' | sed 's/ /,/g')"
fi
if [[ -n "$IP" && ( "$MAC" != "?" || "$STATUS" != "FAILED" ) ]]; then
echo "$MAC|$IP|?|$STATUS"
fi
done
}
print_interface_neighbors_via_iw() { # MAC|_|_|signal
local IFACE=$1
local MAC SIGNAL
iw dev $IFACE station dump | awk '($1 ~ /Station$/) {print $2}' | while read MAC
do
if [[ -n "$MAC" ]]; then
SIGNAL="$(iw dev $IFACE station get $MAC | grep "signal:" | awk '{print $2}')"
echo "${MAC}|?|?|${SIGNAL}_dBm"
fi
done
}
list_clients() { # passive mode. (use 'arp-scan' or 'netdiscover' if want active mode)
local IFACE pid
local CONFDIR
local output=""
# If number (PID) is given, get the associated wifi iface
if [[ "$1" =~ ^[1-9][0-9]*$ ]]; then
pid="$1"
IFACE=$(get_subn_iface_from_pid "$pid")
if [[ -z "$IFACE" ]] ; then
echo "'$pid' is not the pid of a running $PROGNAME instance." >&2
exit 1
fi
else # non-number given
IFACE="$1"
if ( ! is_interface $IFACE ) ; then
echo "'$IFACE' is not an interface or PID" >&2
exit 1
fi
pid=$(get_pid_from_subn_iface "$IFACE")
if [[ -n "$pid" ]] ; then # if this interface is hosted by us
CONFDIR=$(get_confdir_from_pid "$pid")
output="$(print_clients_from_leases "$CONFDIR/dnsmasq.leases" )"
else # this interface NOT hosted by us
echo "Tip: '$IFACE' is not an interface hosted by $PROGNAME" >&2
fi
fi
output="$(echo "$output" ; print_interface_neighbors_via_iw $IFACE) "
output="$(echo "$output" ; print_interface_neighbors_via_iproute $IFACE)"
output="$(echo "$output" | sort -k 1 -k 2 -t '|' | uniq | sed -r '/^\s*$/d')"
echo "$IFACE ($(get_interface_mac $IFACE)) neighbors:"
local fmt="%-19s%-41s%-20s%s" # string length: MAC 17, ipv4 15, ipv6 39, hostname ?
printf "$fmt\n" "MAC" "IP" "HOSTNAME" "INFO"
local line
echo "$output"| while read line
do
if [[ -n "$line" ]]; then
echo "$line" | awk -F'|' "{printf \"$fmt\n\",\$1,\$2,\$3,\$4}"
fi
done
# TODO : merge same mac and same ip line
}
has_running_instance() {
local PID x
for x in $TMPDIR/lnxrouter.*; do
if [[ -f $x/pid ]]; then
PID=$(cat $x/pid)
if [[ -d /proc/$PID ]]; then
return 0
fi
fi
done
return 1
}
is_running_pid() {
list_running | grep -E "^${1} " > /dev/null 2>&1
}
send_stop() {
local x
# send stop signal to specific pid
if is_running_pid $1; then
kill -USR1 $1
return
fi
# send stop signal to specific interface
for x in $(list_running | grep -E " \(?${1}( |\)?\$)" | cut -f1 -d' '); do
kill -USR1 $x
done
}
## ========================================================
## ========================================================
# decide linux-router's global temporary path for all instances
# this is different and should be before config-saving dir. The latter is for one instance
decide_tmpdir(){
local TMPD
if [[ -d /dev/shm ]]; then
TMPD=/dev/shm
elif [[ -d /run/shm ]]; then
TMPD=/run/shm
else
TMPD=/tmp
fi
#TMPDIR=$TMPD/lnxrouter_tmp
echo "$TMPD/lnxrouter_tmp"
}
#======
check_other_functions(){
if [[ $LIST_RUNNING -eq 1 ]]; then
echo -e "List of running $PROGNAME instances:\n"
list_running
exit 0
fi
if [[ -n "$LIST_CLIENTS_ID" ]]; then
list_clients "$LIST_CLIENTS_ID"
exit 0
fi
##### root test ##### NOTE above don't require root ##########
if [[ $(id -u) -ne 0 ]]; then
echo "You must run it as root." >&2
exit 1
fi
###### NOTE below require root ##########
if [[ -n "$STOP_ID" ]]; then
echo "Trying to kill $PROGNAME instance associated with $STOP_ID..."
send_stop "$STOP_ID"
exit 0
fi
}
daemonizing_check(){
if [[ $DAEMONIZE -eq 1 && $RUNNING_AS_DAEMON -eq 0 ]]; then
echo "Running as Daemon..."
# run a detached lnxrouter
RUNNING_AS_DAEMON=1 setsid "$0" "${ARGS[@]}" &
exit 0
fi
}
#============================
check_wifi_settings() {
if ! ( which iw > /dev/null 2>&1 && iw dev $WIFI_IFACE info > /dev/null 2>&1 ); then
echo "WARN: Can't use 'iw' to operate interfce '$WIFI_IFACE', trying 'iwconfig' (not as good as 'iw') ..." >&2
USE_IWCONFIG=1
fi
if [[ $USE_IWCONFIG -eq 1 ]]; then
if ! (which iwconfig > /dev/null 2>&1 && iwconfig $WIFI_IFACE > /dev/null 2>&1); then
echo "ERROR: Can't use 'iwconfig' to operate interfce '$WIFI_IFACE'" >&2
exit 1
fi
fi
if [[ $FREQ_BAND != 2.4 && $FREQ_BAND != 5 ]]; then
echo "ERROR: Invalid frequency band" >&2
exit 1
fi
if [[ $CHANNEL == default ]]; then
if [[ $FREQ_BAND == 2.4 ]]; then
CHANNEL=1
else
CHANNEL=36
fi
fi
if [[ $FREQ_BAND != 5 && $CHANNEL -gt 14 ]]; then
echo "Channel number is greater than 14, assuming 5GHz frequency band"
FREQ_BAND=5
fi
if ! can_be_ap ${WIFI_IFACE}; then
echo "ERROR: Your adapter does not support AP (master) mode" >&2
exit 1
fi
if ! can_be_sta_and_ap ${WIFI_IFACE}; then
if is_interface_wifi_connected ${WIFI_IFACE}; then
echo "ERROR: Your adapter can not be a station (i.e. be connected) and an AP at the same time" >&2
exit 1
elif [[ $NO_VIRT -eq 0 ]]; then
echo "WARN: Your adapter does not fully support AP virtual interface, enabling --no-virt" >&2
NO_VIRT=1
fi
fi
HOSTAPD=$(which hostapd)
if [[ $(get_adapter_kernel_module ${WIFI_IFACE}) =~ ^(8192[cd][ue]|8723a[sue])$ ]]; then
if ! strings "$HOSTAPD" | grep -m1 rtl871xdrv > /dev/null 2>&1; then
echo "ERROR: You need to patch your hostapd with rtl871xdrv patches." >&2
exit 1
fi
if [[ $DRIVER != "rtl871xdrv" ]]; then
echo "WARN: Your adapter needs rtl871xdrv, enabling --driver=rtl871xdrv" >&2
DRIVER=rtl871xdrv
fi
fi
if [[ ${#SSID} -lt 1 || ${#SSID} -gt 32 ]]; then
echo "ERROR: Invalid SSID length ${#SSID} (expected 1..32)" >&2
exit 1
fi
if [[ $USE_PSK -eq 0 ]]; then
if [[ ${#PASSPHRASE} -gt 0 && ${#PASSPHRASE} -lt 8 ]] || [[ ${#PASSPHRASE} -gt 63 ]]; then
echo "ERROR: Invalid passphrase length ${#PASSPHRASE} (expected 8..63)" >&2
exit 1
fi
elif [[ ${#PASSPHRASE} -gt 0 && ${#PASSPHRASE} -ne 64 ]]; then
echo "ERROR: Invalid pre-shared-key length ${#PASSPHRASE} (expected 64)" >&2
exit 1
fi
if [[ $(get_adapter_kernel_module ${WIFI_IFACE}) =~ ^rtl[0-9].*$ ]]; then
if [[ $WPA_VERSION == '1' || $WPA_VERSION == '1+2' ]]; then
echo "WARN: Realtek drivers usually have problems with WPA1, WPA2 is recommended" >&2
fi
echo "WARN: If AP doesn't work, read https://github.com/oblique/create_ap/blob/master/howto/realtek.md" >&2
fi
}
check_if_new_mac_valid() {
if ! is_unicast_macaddr "$NEW_MACADDR"; then
echo "ERROR: The first byte of MAC address (${NEW_MACADDR}) must be even" >&2
exit 1
fi
if [[ $(get_all_mac_in_system | grep -c ${NEW_MACADDR}) -ne 0 ]]; then
echo "WARN: MAC address '${NEW_MACADDR}' already exists" >&2
fi
}
decide_target_interface() {
# TARGET_IFACE is a existing physical interface
if [[ "$CONN_IFACE" ]]; then
echo "$CONN_IFACE"
elif [[ "$WIFI_IFACE" ]]; then
echo "$WIFI_IFACE"
else
echo "No target interface specified" >&2
return 1
fi
}
decide_ip_addresses() {
if [[ ! -n $GATEWAY ]]; then
GATEWAY="$(generate_random_ip4)"
echo "Use random LAN IPv4 address $GATEWAY"
elif [[ ! "$GATEWAY" =~ "." ]]; then
GATEWAY="192.168.${GATEWAY}.1"
fi
if [[ $IPV6 -eq 1 && ! -n $PREFIX6 ]]; then
PREFIX6="$(generate_random_lan_ip6_prefix)"
echo "Use random LAN IPv6 address ${PREFIX6}${IID6}"
elif [[ ! "$PREFIX6" =~ ":" ]]; then
PREFIX6="fd00:0:0:${PREFIX6}::"
fi
if [[ $IPV6 -eq 1 ]]; then
GATEWAY6="${PREFIX6}${IID6}"
fi
}
prepare_wifi_interface() {
if [[ $USE_IWCONFIG -eq 0 ]]; then
iw dev ${WIFI_IFACE} set power_save off
fi
if [[ $NO_VIRT -eq 0 ]]; then
## Will generate virtual wifi interface
if is_interface_wifi_connected ${WIFI_IFACE}; then
WIFI_IFACE_FREQ=$(iw dev ${WIFI_IFACE} link | grep -i freq | awk '{print $2}')
WIFI_IFACE_CHANNEL=$(ieee80211_frequency_to_channel ${WIFI_IFACE_FREQ})
echo "${WIFI_IFACE} already in channel ${WIFI_IFACE_CHANNEL} (${WIFI_IFACE_FREQ} MHz)"
if is_5ghz_frequency $WIFI_IFACE_FREQ; then
FREQ_BAND=5
else
FREQ_BAND=2.4
fi
if [[ $WIFI_IFACE_CHANNEL -ne $CHANNEL ]]; then
echo "Channel fallback to ${WIFI_IFACE_CHANNEL}"
CHANNEL=$WIFI_IFACE_CHANNEL
else
echo
fi
fi
echo "Creating a virtual WiFi interface... "
VWIFI_IFACE=$(alloc_new_vface_name)
if iw dev ${WIFI_IFACE} interface add ${VWIFI_IFACE} type __ap; then
# Successfully created virtual wifi interface
# if NM running, it will give the new virtual interface a random MAC. MAC will go back after setting NM unmanaged
sleep 2
echo "${VWIFI_IFACE} created"
else
VWIFI_IFACE=
die "Failed creating virtual WiFi interface. Maybe your WiFi adapter does not fully support virtual interfaces. Try again with '--no-virt'"
fi
AP_IFACE=${VWIFI_IFACE}
else # no virtual wifi interface, use wifi device interface itself
AP_IFACE=${WIFI_IFACE}
fi
}
decide_subnet_interface() {
if [[ $WIFI_IFACE ]]; then
echo "${AP_IFACE}"
else
echo "${TARGET_IFACE}"
fi
}
dealwith_mac() {
local VMAC
if [[ -n "$NEW_MACADDR" ]] ; then # user choose to set subnet mac
echo "Setting ${SUBNET_IFACE} new MAC address ${NEW_MACADDR} ..."
set_interface_mac ${SUBNET_IFACE} ${NEW_MACADDR} || die "Failed setting new MAC address"
elif [[ $VWIFI_IFACE ]]; then # user didn't choose to set mac, but using virtual wifi interface
VMAC=$(get_new_macaddr_according_to_existing ${WIFI_IFACE})
if [[ "$VMAC" ]]; then
echo "Assigning MAC address $VMAC to virtual interface $VWIFI_IFACE according to $WIFI_IFACE ..."
set_interface_mac $VWIFI_IFACE $VMAC
fi
fi
}
write_hostapd_conf() {
cat <<- EOF > "$CONFDIR/hostapd.conf"
beacon_int=100
ssid=${SSID}
interface=${AP_IFACE}
driver=${DRIVER}
channel=${CHANNEL}
ctrl_interface=$CONFDIR/hostapd_ctrl
ctrl_interface_group=0
ignore_broadcast_ssid=$HIDDEN
ap_isolate=$ISOLATE_CLIENTS
EOF
if [[ -n "$COUNTRY" ]]; then
cat <<- EOF >> "$CONFDIR/hostapd.conf"
country_code=${COUNTRY}
ieee80211d=1
EOF
fi
if [[ $FREQ_BAND == 2.4 ]]; then
echo "hw_mode=g" >> "$CONFDIR/hostapd.conf"
else
echo "hw_mode=a" >> "$CONFDIR/hostapd.conf"
fi
if [[ $MAC_FILTER -eq 1 ]]; then
cat <<- EOF >> "$CONFDIR/hostapd.conf"
macaddr_acl=${MAC_FILTER}
accept_mac_file=${MAC_FILTER_ACCEPT}
EOF
fi
if [[ $IEEE80211N -eq 1 ]]; then
cat <<- EOF >> "$CONFDIR/hostapd.conf"
ieee80211n=1
ht_capab=${HT_CAPAB}
EOF
fi
if [[ $IEEE80211AC -eq 1 ]]; then
echo "ieee80211ac=1" >> "$CONFDIR/hostapd.conf"
fi
if [[ -n "$VHT_CAPAB" ]]; then
echo "vht_capab=${VHT_CAPAB}" >> "$CONFDIR/hostapd.conf"
fi
if [[ $IEEE80211N -eq 1 ]] || [[ $IEEE80211AC -eq 1 ]]; then
echo "wmm_enabled=1" >> "$CONFDIR/hostapd.conf"
fi
if [[ -n "$PASSPHRASE" ]]; then
[[ "$WPA_VERSION" == "1+2" ]] && WPA_VERSION=3
if [[ $USE_PSK -eq 0 ]]; then
WPA_KEY_TYPE=passphrase
else
WPA_KEY_TYPE=psk
fi
cat <<- EOF >> "$CONFDIR/hostapd.conf"
wpa=${WPA_VERSION}
wpa_${WPA_KEY_TYPE}=${PASSPHRASE}
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
rsn_pairwise=CCMP
EOF
else
echo "WARN: Wifi is not protected by password" >&2
fi
chmod 600 "$CONFDIR/hostapd.conf"
}
write_dnsmasq_conf() {
if grep "^nobody:" /etc/group >/dev/null 2>&1 ; then
NOBODY_GROUP="nobody"
else
NOBODY_GROUP="nogroup"
fi
mkfifo "$CONFDIR/dnsmasq.log" || die "Failed creating pipe file for dnsmasq"
chown nobody "$CONFDIR/dnsmasq.log" || die "Failed changing dnsmasq log file owner"
cat "$CONFDIR/dnsmasq.log" &
cat <<- EOF > "$CONFDIR/dnsmasq.conf"
user=nobody
group=$NOBODY_GROUP
bind-dynamic
listen-address=${GATEWAY}
interface=$SUBNET_IFACE
except-interface=lo
no-dhcp-interface=lo
dhcp-range=${GATEWAY%.*}.10,${GATEWAY%.*}.250,255.255.255.0
dhcp-option-force=option:router,${GATEWAY}
#log-dhcp
log-facility=$CONFDIR/dnsmasq.log
bogus-priv
domain-needed
EOF
# 'log-dhcp'(Extra logging for DHCP) shows too much logs.
# if use '-d', 'log-facility' should = /dev/null
if [[ $SHARE_METHOD == "none" ]]; then
echo "no-resolv" >> "$CONFDIR/dnsmasq.conf"
echo "no-poll" >> "$CONFDIR/dnsmasq.conf"
fi
if [[ "$DHCP_DNS" != "no" ]]; then
if [[ "$DHCP_DNS" == "gateway" ]]; then
dns_offer="$GATEWAY"
else
dns_offer="$DHCP_DNS"
fi
echo "dhcp-option-force=option:dns-server,${dns_offer}" >> "$CONFDIR/dnsmasq.conf"
fi
if [[ ! "$dnsmasq_NO_DNS" -eq 0 ]]; then
echo "port=0" >> "$CONFDIR/dnsmasq.conf"
fi
[[ -n "$MTU" ]] && echo "dhcp-option-force=option:mtu,${MTU}" >> "$CONFDIR/dnsmasq.conf"
[[ $ETC_HOSTS -eq 0 ]] && echo no-hosts >> "$CONFDIR/dnsmasq.conf"
[[ -n "$ADDN_HOSTS" ]] && echo "addn-hosts=${ADDN_HOSTS}" >> "$CONFDIR/dnsmasq.conf"
if [[ "$THISHOSTNAME" ]]; then
[[ "$THISHOSTNAME" == "-" ]] && THISHOSTNAME="$(cat /etc/hostname)"
echo "interface-name=$THISHOSTNAME,$SUBNET_IFACE" >> "$CONFDIR/dnsmasq.conf"
fi
if [[ ! "$SHOW_DNS_QUERY" -eq 0 ]]; then
echo log-queries=extra >> "$CONFDIR/dnsmasq.conf"
fi
if [[ $DNS ]]; then
DNS_count=$(echo "$DNS" | awk -F, '{print NF}')
for (( i=1;i<=DNS_count;i++ )); do
sep_ip_port "$(echo $DNS | cut -d, -f$i)" DNS_IP DNS_PORT
[[ "$DNS_PORT" ]] && DNS_PORT_D="#$DNS_PORT"
echo "server=${DNS_IP}${DNS_PORT_D}" >> "$CONFDIR/dnsmasq.conf"
done
cat <<- EOF >> "$CONFDIR/dnsmasq.conf"
no-resolv
no-poll
EOF
fi
if [[ $IPV6 -eq 1 ]];then
cat <<- EOF >> "$CONFDIR/dnsmasq.conf"
listen-address=${GATEWAY6}
enable-ra
#quiet-ra
dhcp-range=interface:${SUBNET_IFACE},::,::ffff:ffff:ffff:ffff,constructor:${SUBNET_IFACE},ra-stateless,64
EOF
if [[ "$DHCP_DNS6" != "no" ]]; then
if [[ "$DHCP_DNS6" == "gateway" ]]; then
dns_offer6="[$GATEWAY6]"
else
dns_offer6="$DHCP_DNS6"
fi
echo "dhcp-option=option6:dns-server,${dns_offer6}" >> "$CONFDIR/dnsmasq.conf"
fi
fi
}
run_wifi_ap_processes() {
if [[ $NO_HAVEGED -eq 0 ]]; then
haveged_watchdog &
HAVEGED_WATCHDOG_PID=$!
echo "$HAVEGED_WATCHDOG_PID" > "$CONFDIR/haveged_watchdog.pid"
echo
echo "haveged_watchdog PID: $HAVEGED_WATCHDOG_PID"
fi
# start access point
#echo "hostapd command-line interface: hostapd_cli -p $CONFDIR/hostapd_ctrl"
# start hostapd (use stdbuf when available for no delayed output in programs that redirect stdout)
STDBUF_PATH=`which stdbuf`
if [ $? -eq 0 ]; then
STDBUF_PATH=$STDBUF_PATH" -oL"
fi
echo
echo "Starting hostapd"
if which complain > /dev/null 2>&1; then
complain hostapd
fi
# hostapd '-P' works only when use '-B' (run in background)
$STDBUF_PATH hostapd $HOSTAPD_DEBUG_ARGS -P "$CONFDIR/hostapd.pid" "$CONFDIR/hostapd.conf" &
HOSTAPD_PID=$!
echo "$HOSTAPD_PID" > "$CONFDIR/hostapd.pid"
echo "hostapd PID: $HOSTAPD_PID"
#while [[ ! -f $CONFDIR/hostapd.pid ]]; do
# sleep 1
#done
#echo -n "hostapd PID: " ; cat $CONFDIR/hostapd.pid
pid_watchdog $HOSTAPD_PID 10 "hostapd failed" &
sleep 3
}
start_dnsmasq() {
echo
echo "Starting dnsmasq"
if which complain > /dev/null 2>&1; then
# openSUSE's apparmor does not allow dnsmasq to read files.
# remove restriction.
complain dnsmasq
fi
# Using '-d'(no daemon) dnsmasq will not turn into 'nobody'
# '-x' works only when no '-d'
dnsmasq -k -C "$CONFDIR/dnsmasq.conf" -x "$CONFDIR/dnsmasq.pid" -l "$CONFDIR/dnsmasq.leases" &
#####DNSMASQ_PID=$! # only when with '-d'
######echo "dnsmasq PID: $DNSMASQ_PID" # only when with '-d'
i=0; while [[ ! -f "$CONFDIR/dnsmasq.pid" ]]; do
sleep 1
i=$((i + 1))
if [[ $i -gt 10 ]]; then die "Couldn't get dnsmasq PID" ; fi
done
DNSMASQ_PID="$(cat "$CONFDIR/dnsmasq.pid" )"
echo "dnsmasq PID: $DNSMASQ_PID"
######(wait $DNSMASQ_PID ; die "dnsmasq failed") & # wait can't deal with non-child
pid_watchdog $DNSMASQ_PID 9 "dnsmasq failed" &
sleep 2
}
check_rfkill_unblock_wifi() {
local PHY
if which rfkill > /dev/null 2>&1 ; then
PHY=$(get_interface_phy_device ${SUBNET_IFACE})
[[ -n $PHY ]] && rfkill unblock $(rfkill | grep $PHY | awk '{print $1}') >/dev/null 2>&1
fi
}
#=========== Above are functions ======================
#=========== Executing begin ==============================
# if empty option, show usage and exit
check_empty_option "$@"
# TODO: are some global variables are still defined in those following code?
define_global_variables
ARGS=( "$@" )
parse_user_options "$@"
# TODO: detect user option conflict
# check if networkManager running
NM_RUNNING="$(is_nm_running)"
TMPDIR="$(decide_tmpdir)"
# if user choose to deal with running instances, will output some info then exit after this
# NOTE above don't require root
check_other_functions
# NOTE below require root
# if user choose to daemonize, will start new background process and exit this
daemonizing_check
# check if wifi will work on this system and user settings
[[ $WIFI_IFACE ]] && check_wifi_settings
[[ -n "$NEW_MACADDR" ]] && check_if_new_mac_valid # check NEW_MACADDR. will exit if not valid
# checks finished
## ===== Above don't echo anything if no warning or error====================
## ========================================================
phead
echo "PID: $$"
TARGET_IFACE="$(decide_target_interface)" || exit 1 # judge wired (-i CONN_IFACE) or wireless hotspot (--ap $WIFI_IFACE)
echo "Target interface is ${TARGET_IFACE} ($(get_interface_mac $TARGET_IFACE))"
# TODO: show interface type, device model and pci/usb id (hwdata pci.ids), current driver
if [[ "$MAC_USE_RANDOM" -eq 1 ]] ; then
NEW_MACADDR="$(generate_random_mac)"
echo "Use random MAC address $NEW_MACADDR"
fi
decide_ip_addresses # ip 4 & 6 lan addresses
# if user choose to make DHCP to tell clients to use other DNS, we don't have to serve DNS
[[ $DHCP_DNS != 'gateway' && $DHCP_DNS6 != 'gateway' ]] && dnsmasq_NO_DNS=1
#===========================================================
#==== begin to do some change on config files and system===
init_trap
# NOTE function die() is designed not to be used before init_trap() executed
init_conf_dirs # CONFDIR , COMMON_CONFDIR . make dir
[[ $WIFI_IFACE ]] && prepare_wifi_interface # this will create virtual ap interface (if needed) and set VWIFI_IFACE and AP_IFACE (if success)
SUBNET_IFACE="$(decide_subnet_interface)" # SUBNET_IFACE can be TARGET_IFACE (wired) or AP_IFACE (ap) .this is after prepare_wifi_interface()
echo "$SUBNET_IFACE" > "$CONFDIR/subn_iface"
# if virtual wifi interface, will be destroyed, so only need to save status when not
[[ -z $VWIFI_IFACE ]] && backup_interface_status
# TODO: should these 2 before calling prepare_wifi_interface ? in check_wifi_settings() ?
# set iw country code
if [[ $WIFI_IFACE && -n "$COUNTRY" && $USE_IWCONFIG -eq 0 ]]; then
iw reg set "$COUNTRY" || die "Failed setting country code"
fi
# judge channel availability after changing country code
if [[ $WIFI_IFACE ]] ; then
can_transmit_to_channel ${AP_IFACE} ${CHANNEL} || die "Your adapter can not transmit to channel ${CHANNEL}, frequency band ${FREQ_BAND}GHz."
fi
[[ $WIFI_IFACE ]] && write_hostapd_conf
#===================================================
#===================================================
# set interface unmanaged by networkManager
if [[ $NM_RUNNING -eq 1 ]] && nm_knows $TARGET_IFACE; then # if nm knows target iface, should know subnet iface too. but need to wait until nm finds subnet iface (waiting code is in nm_set_unmanaged()
nm_set_unmanaged ${SUBNET_IFACE} # will write NM_UNM_LIST
fi
[[ $NO_DNSMASQ -eq 0 ]] && write_dnsmasq_conf
#===========================
# initialize subnet interface
# take subnet interface down first
ip link set down dev ${SUBNET_IFACE} || die "Failed setting ${SUBNET_IFACE} down"
# flush old IPs of subnet interface
ip addr flush ${SUBNET_IFACE} || die "Failed flush ${SUBNET_IFACE} IP"
dealwith_mac # setting MAC should be after setting NM unmanaged
[[ $WIFI_IFACE ]] && check_rfkill_unblock_wifi
# bring subnet interface up
ip link set up dev ${SUBNET_IFACE} || die "Failed bringing ${SUBNET_IFACE} up"
# hostapd , haveged
[[ $WIFI_IFACE ]] && run_wifi_ap_processes
# add ipv4 address to subnet interface
ip -4 addr add ${GATEWAY}/24 broadcast ${GATEWAY%.*}.255 dev ${SUBNET_IFACE} || die "Failed setting ${SUBNET_IFACE} IPv4 address"
set_ipv6_bits
# add ipv6 address to subnet interface
if [[ $IPV6 -eq 1 ]] ; then
ip -6 addr add ${GATEWAY6}/64 dev ${SUBNET_IFACE} || die "Failed setting ${SUBNET_IFACE} IPv6 address"
fi
check_iptables
# enable Internet sharing
if [[ "$SHARE_METHOD" == "none" ]]; then
echo "No Internet sharing"
[[ "$BANLAN" -eq 1 ]] && start_ban_lan
elif [[ "$SHARE_METHOD" == "nat" ]]; then
[[ "$INTERNET_IFACE" && "$dnsmasq_NO_DNS" -eq 0 ]] && echo -e "\nWARN: You specified Internet interface but this host is providing local DNS, queries may leak to other interfaces!!!\n" >&2
start_nat
[[ "$BANLAN" -eq 1 ]] && start_ban_lan
echo 1 > "/proc/sys/net/ipv4/ip_forward" || die "Failed enabling system ipv4 forwarding"
if [[ $IPV6 -eq 1 ]]; then
echo 1 > "/proc/sys/net/ipv6/conf/all/forwarding" || die "Failed enabling system ipv6 forwarding"
fi
# to enable clients to establish PPTP connections we must
# load nf_nat_pptp module
modprobe nf_nat_pptp > /dev/null 2>&1 && echo "Loaded kernel module nf_nat_pptp"
elif [[ "$SHARE_METHOD" == "redsocks" ]]; then
if [[ $IPV6 -eq 1 ]]; then
echo 1 > "/proc/sys/net/ipv6/conf/$SUBNET_IFACE/forwarding" || die "Failed enabling $SUBNET_IFACE ipv6 forwarding" # to set NA router bit
fi
[[ "$dnsmasq_NO_DNS" -eq 0 && ! $DNS ]] && echo -e "\nWARN: You are using in transparent proxy mode but this host is providing local DNS, this may cause privacy leak !!!\n" >&2
[[ "$BANLAN" -eq 1 ]] && start_ban_lan
start_redsocks
fi
# start dhcp + dns (optional)
# allow dns port input even if we don't run dnsmasq
# user can serve their own dns server
[[ "$DHCP_DNS" == "gateway" || "$DHCP_DNS6" == "gateway" ]] && allow_dns_port
[[ "$CATCH_DNS" -eq 1 ]] && start_catch_dns
[[ $NO_DNSMASQ -eq 0 ]] && ( allow_dhcp ; start_dnsmasq )
echo
echo "== Setting up completed, now linux-router is working =="
#============================================================
#============================================================
#============================================================
show_qr() {
local T S P H
S="$SSID"
if [[ -n "$PASSPHRASE" ]]; then
T="WPA"
P="$PASSPHRASE"
else
T="nopass"
fi
[[ "$HIDDEN" -eq 1 ]] && H="true"
echo "Scan QR code on phone to connect to WiFi"
qrencode -m 2 -t ANSIUTF8 "WIFI:T:${T};S:${S};P:${P};H:${H};"
echo "Use this command to save QR code to image file:"
echo " qrencode -m 2 -o <file> \"WIFI:T:${T};S:${S};P:${P};H:${H};\""
echo
}
[[ "$QR" -eq 1 ]] && show_qr
# need loop to keep this script running
bash -c "while :; do sleep 8000 ; done " &
KEEP_RUNNING_PID=$!
echo "$KEEP_RUNNING_PID" > "$CONFDIR/keep_running.pid"
wait $KEEP_RUNNING_PID
clean_exit