/**
  ******************************************************************************
  * @file    usb_istr.h
  * @author  MCD Application Team
  * @version V3.4.0
  * @date    29-June-2012
  * @brief   This file includes the peripherals header files in the user application.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
  *
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        http://www.st.com/software_license_agreement_liberty_v2
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_ISTR_H
#define __USB_ISTR_H

/* Includes ------------------------------------------------------------------*/
#include "usb_conf.h"

/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */

#ifndef STM32F10X_CL
 void USB_Istr(void);
#else /* STM32F10X_CL */
 u32 STM32_PCD_OTG_ISR_Handler(void);
#endif /* STM32F10X_CL */

/* function prototypes Automatically built defining related macros */

void EP1_IN_Callback(void);
void EP2_IN_Callback(void);
void EP3_IN_Callback(void);
void EP4_IN_Callback(void);
void EP5_IN_Callback(void);
void EP6_IN_Callback(void);
void EP7_IN_Callback(void);

void EP1_OUT_Callback(void);
void EP2_OUT_Callback(void);
void EP3_OUT_Callback(void);
void EP4_OUT_Callback(void);
void EP5_OUT_Callback(void);
void EP6_OUT_Callback(void);
void EP7_OUT_Callback(void);

#ifndef STM32F10X_CL

#ifdef CTR_CALLBACK
void CTR_Callback(void);
#endif

#ifdef DOVR_CALLBACK
void DOVR_Callback(void);
#endif

#ifdef ERR_CALLBACK
void ERR_Callback(void);
#endif

#ifdef WKUP_CALLBACK
void WKUP_Callback(void);
#endif

#ifdef SUSP_CALLBACK
void SUSP_Callback(void);
#endif

#ifdef RESET_CALLBACK
void RESET_Callback(void);
#endif

#ifdef SOF_CALLBACK
void SOF_Callback(void);
#endif

#ifdef ESOF_CALLBACK
void ESOF_Callback(void);
#endif

#else /* STM32F10X_CL */

/* Interrupt subroutines user callbacks prototypes.
   These callbacks are called into the respective interrupt subroutine functions
   and can be tailored for various user application purposes.
     Note: Make sure that the correspondent interrupt is enabled through the 
     definition in usb_conf.h file */ 
void INTR_MODEMISMATCH_Callback(void);
void INTR_SOFINTR_Callback(void);
void INTR_RXSTSQLVL_Callback(void);
void INTR_NPTXFEMPTY_Callback(void);
void INTR_GINNAKEFF_Callback(void);
void INTR_GOUTNAKEFF_Callback(void);
void INTR_ERLYSUSPEND_Callback(void);
void INTR_USBSUSPEND_Callback(void);
void INTR_USBRESET_Callback(void);
void INTR_ENUMDONE_Callback(void);
void INTR_ISOOUTDROP_Callback(void);
void INTR_EOPFRAME_Callback(void);
void INTR_EPMISMATCH_Callback(void);
void INTR_INEPINTR_Callback(void);
void INTR_OUTEPINTR_Callback(void);
void INTR_INCOMPLISOIN_Callback(void);
void INTR_INCOMPLISOOUT_Callback(void);
void INTR_WKUPINTR_Callback(void);

/* Isochronous data update */
void INTR_RXSTSQLVL_ISODU_Callback(void); 

#endif /* STM32F10X_CL */


#endif /*__USB_ISTR_H*/

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/