/**
  ******************************************************************************
  * @file    usb_sil.c
  * @author  MCD Application Team
  * @version V3.4.0
  * @date    29-June-2012
  * @brief   Simplified Interface Layer for Global Initialization and Endpoint
  *          Rea/Write operations.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
  *
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        http://www.st.com/software_license_agreement_liberty_v2
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
  ******************************************************************************
  */


/* Includes ------------------------------------------------------------------*/
#include "usb_lib.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/

/*******************************************************************************
* Function Name  : USB_SIL_Init
* Description    : Initialize the USB Device IP and the Endpoint 0.
* Input          : None.
* Output         : None.
* Return         : Status.
*******************************************************************************/
uint32_t USB_SIL_Init(void)
{
//#ifndef STM32F10X_CL
  
  /* USB interrupts initialization */
  /* clear pending interrupts */
  _SetISTR(0);
  wInterrupt_Mask = IMR_MSK;
  /* set interrupts mask */
  _SetCNTR(wInterrupt_Mask);
  
//#else
  
//  /* Perform OTG Device initialization procedure (including EP0 init) */
//  OTG_DEV_Init();
//  
//#endif /* STM32F10X_CL */

  return 0;
}

/*******************************************************************************
* Function Name  : USB_SIL_Write
* Description    : Write a buffer of data to a selected endpoint.
* Input          : - bEpAddr: The address of the non control endpoint.
*                  - pBufferPointer: The pointer to the buffer of data to be written
*                    to the endpoint.
*                  - wBufferSize: Number of data to be written (in bytes).
* Output         : None.
* Return         : Status.
*******************************************************************************/
uint32_t USB_SIL_Write(uint8_t bEpAddr, uint8_t* pBufferPointer, uint32_t wBufferSize)
{
#ifndef STM32F10X_CL

  /* Use the memory interface function to write to the selected endpoint */
  UserToPMABufferCopy(pBufferPointer, GetEPTxAddr(bEpAddr & 0x7F), wBufferSize);

  /* Update the data length in the control register */
  SetEPTxCount((bEpAddr & 0x7F), wBufferSize);
  
#else
  
   /* Use the PCD interface layer function to write to the selected endpoint */
   PCD_EP_Write (bEpAddr, pBufferPointer, wBufferSize); 
   
#endif /* STM32F10X_CL */

  return 0;
}

/*******************************************************************************
* Function Name  : USB_SIL_Read
* Description    : Write a buffer of data to a selected endpoint.
* Input          : - bEpAddr: The address of the non control endpoint.
*                  - pBufferPointer: The pointer to which will be saved the 
*                     received data buffer.
* Output         : None.
* Return         : Number of received data (in Bytes).
*******************************************************************************/
uint32_t USB_SIL_Read(uint8_t bEpAddr, uint8_t* pBufferPointer)
{
  uint32_t DataLength = 0;

#ifndef STM32F10X_CL

  /* Get the number of received data on the selected Endpoint */
  DataLength = GetEPRxCount(bEpAddr & 0x7F);
  
  /* Use the memory interface function to write to the selected endpoint */
  PMAToUserBufferCopy(pBufferPointer, GetEPRxAddr(bEpAddr & 0x7F), DataLength);

#else
  
  USB_OTG_EP *ep;

  /* Get the structure pointer of the selected Endpoint */
  ep = PCD_GetOutEP(bEpAddr);
  
  /* Get the number of received data */
  DataLength = ep->xfer_len;
  
  /* Use the PCD interface layer function to read the selected endpoint */
  PCD_EP_Read (bEpAddr, pBufferPointer, DataLength);
  
#endif /* STM32F10X_CL */

  /* Return the number of received data */
  return DataLength;
}

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/