diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/.gitignore b/Hardware/Firmware/Gebot_Firmware v1.0/.gitignore new file mode 100644 index 0000000..51ad673 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/.gitignore @@ -0,0 +1,9 @@ +.vscode +STM32/Output/* +Output +DebugConfig +JLinkLog.txt +pibot check.map +pibot.uvguix.* +startup_stm32f10x_md.lst +MDK-ARM \ No newline at end of file diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/README.md b/Hardware/Firmware/Gebot_Firmware v1.0/README.md new file mode 100644 index 0000000..f9e4297 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/README.md @@ -0,0 +1,49 @@ +# 固件使用说明 + +> zhanli : 更新 2023-12-26 ：小车驱动经过验证更新 + +## 一、注意事项以及环境安装 + +### 1.1 代码使用注意事项 + +​ 在目录`STM32`中，`params.mk`指定了部分的宏定义配置。目前实验室购买的两台小车的电机驱动是不同的，一台小车的电机驱动是TB6612FNG，另外一台小车的电机驱动是DRV8870。所以在编译的时候注意对小车的电机驱动芯片进行区分。一般来说简单的区分方式是单芯片的是TB6612，双芯片的是DRV8870。 + +```makefile +# params.mk +# 定义宏定义 +-DMOTOR_DRIVER_TB6612=1 +-DMOTOR_DRIVER_DRV8870=2 +# 这里指定的是TB6612，如果是8870，则-DMOTOR_DRIVER=MOTOR_DRIVER_DRV8870 +-DMOTOR_DRIVER=MOTOR_DRIVER_TB6612 + +``` +### 1.2 Keil的环境安装 + +​ `PIBOT\软件工具\软件工具集\MDK520\`目录提供了Keil5的安装包`MDK520.EXE`，安装过程不再赘述。 +> [百度云链接](https://pan.baidu.com/s/15Q2ioZ0Vt-2zKLFBYAf-Yg )： 提取码：`owla` +> +> 完成安装后需要继续安装`Keil.STM32F1xx_DFP.2.2.0.pack` + +## 二、编译与烧写 +### 2.1 编译 +​ 到`PIBOT`源码包中双击打开`pibot.uvprojx`工程,编译 +![](https://upload-images.jianshu.io/upload_images/3678585-b70d1e2dfbb71dfa.png?imageMogr2/auto-orient/strip%7CimageView2/2/w/1240) + +### 2.2 烧写程序 +​ **这里我们使用`JLink`烧写程序，连接`JLink`至开发板，开发板上电这里的JLink只需要连接GND SWDIO SWCLK三根线** +​ 打开工程选项，切换至Debug标签，选择`JLink` + ![](https://upload-images.jianshu.io/upload_images/3678585-f4faa6fb614f85e3.png?imageMogr2/auto-orient/strip%7CimageView2/2/w/1240) + +​ 点击`Settings`按钮，`Port`选择`SW` + +![](https://upload-images.jianshu.io/upload_images/3678585-d00e943421112f2d.png?imageMogr2/auto-orient/strip%7CimageView2/2/w/1240) + +​ 切换至Flash Download标签,如下图设置 + +![](https://upload-images.jianshu.io/upload_images/3678585-ffda6263dd4478be.png?imageMogr2/auto-orient/strip%7CimageView2/2/w/1240) + +​ 保存后即可烧写程序 + +![](https://upload-images.jianshu.io/upload_images/3678585-6e35f6af95e93451.png?imageMogr2/auto-orient/strip%7CimageView2/2/w/1240) + +​ 同时可以看到程序运行指示灯在闪烁表示程序在正常运行了。 \ No newline at end of file diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/adc_dac.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/adc_dac.c new file mode 100644 index 0000000..2b41627 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/adc_dac.c @@ -0,0 +1,273 @@ +#ifdef __cplusplus +extern "C" { +#endif + +#include "adc_dac.h" + +#define ADC1_DR_Address ((u32)0x40012400+0x4c) +volatile unsigned int ADC_Sample_Value[32]; +float Reference_Voltage; +float cpu_temperature; +uint8_t ADC_EN_NUM; + + +void PB_ADC_Init(uint16_t adc_channel , uint8_t adc_num , float Reference_Voltage_ ) +{ + /**********************************************************************************************************************/ + DMA_InitTypeDef DMA_InitStructure; + ADC_InitTypeDef ADC_InitStructure; + uint8_t ADC_Channel_Num; + + GPIO_InitTypeDef GPIO_InitStructure; + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB |RCC_APB2Periph_GPIOC, ENABLE); + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN; + + + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE); + RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1,ENABLE); + /**********************************************************************************************************************/ + + ADC_EN_NUM = adc_num; + Reference_Voltage = Reference_Voltage_; + + DMA_DeInit(DMA1_Channel1); + DMA_InitStructure.DMA_PeripheralBaseAddr = ADC1_DR_Address; //ADC address + DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)ADC_Sample_Value;//RAM address + DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC; + DMA_InitStructure.DMA_BufferSize = adc_num+1;//plus 1 is for the temperature adc. + DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;//Peripherals fixed address + DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; //RAM fixed address + DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word; + DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word; + DMA_InitStructure.DMA_Mode = DMA_Mode_Circular; //cycle transmission + DMA_InitStructure.DMA_Priority = DMA_Priority_High; + DMA_InitStructure.DMA_M2M = DMA_M2M_Disable; + DMA_Init(DMA1_Channel1, &DMA_InitStructure); + + + DMA_Cmd(DMA1_Channel1, ENABLE); + + /* ADC1 configuration */ + ADC_InitStructure.ADC_Mode = ADC_Mode_RegSimult; //indepedent ADC mode + ADC_InitStructure.ADC_ScanConvMode = ENABLE ; //enable scan mode, scan mode used by multi-channel collect + ADC_InitStructure.ADC_ContinuousConvMode = ENABLE; //enable continuous convert mode + ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None; //not use external interrupt to start convert + ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right; //collect data Align Right + ADC_InitStructure.ADC_NbrOfChannel = adc_num+1; //number of channel need be convert + ADC_Init(ADC1, &ADC_InitStructure); + /*configure ADC clock, the frequency must below 14MHz*/ + RCC_ADCCLKConfig(RCC_PCLK2_Div6); + + ADC_DMACmd(ADC1, ENABLE); + ADC_Cmd(ADC1, ENABLE); + + ADC_Channel_Num=0; + + //if ADC0 enable + if( ( (adc_channel >> 0) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; + GPIO_Init(GPIOA, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_0, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC1 enable + if( ( (adc_channel >> 1) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1; + GPIO_Init(GPIOA, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_1, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC2 enable + if( ( (adc_channel >> 2) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; + GPIO_Init(GPIOA, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_2, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC3 enable + if( ( (adc_channel >> 3) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3; + GPIO_Init(GPIOA, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_3, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC4 enable + if( ( (adc_channel >> 4) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4; + GPIO_Init(GPIOA, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_4, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC5 enable + if( ( (adc_channel >> 5) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5; + GPIO_Init(GPIOA, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_5, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC6 enable + if( ( (adc_channel >> 6) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6; + GPIO_Init(GPIOA, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_6, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC7 enable + if( ( (adc_channel >> 7) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7; + GPIO_Init(GPIOA, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_7, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC8 enable + if( ( (adc_channel >> 8) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; + GPIO_Init(GPIOB, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_8, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC9 enable + if( ( (adc_channel >> 9) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1; + GPIO_Init(GPIOB, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_9, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC10 enable + if( ( (adc_channel >> 10) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; + GPIO_Init(GPIOC, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_10, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC11 enable + if( ( (adc_channel >> 11) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1; + GPIO_Init(GPIOC, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_11, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC12 enable + if( ( (adc_channel >> 12) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; + GPIO_Init(GPIOC, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_12, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC13 enable + if( ( (adc_channel >> 13) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3; + GPIO_Init(GPIOC, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_13, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC14 enable + if( ( (adc_channel >> 14) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4; + GPIO_Init(GPIOC, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_14, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + //if ADC15 enable + if( ( (adc_channel >> 15) & 0x0001) == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5; + GPIO_Init(GPIOC, &GPIO_InitStructure); + ADC_RegularChannelConfig(ADC1, ADC_Channel_15, ++ADC_Channel_Num , ADC_SampleTime_55Cycles5); + } + + + //the channel16 is always enable + //set collect channel IN16,set collect time + ADC_RegularChannelConfig(ADC1, ADC_Channel_16, ++ADC_Channel_Num , ADC_SampleTime_239Cycles5); //set collect channel IN16,set collect time + ADC_TempSensorVrefintCmd(ENABLE); //enable inner standard voltage and temperture sensor + + ADC_DMACmd(ADC1, ENABLE); + ADC_Cmd(ADC1, ENABLE); + + ADC_ResetCalibration(ADC1); + while(ADC_GetResetCalibrationStatus(ADC1)); + ADC_StartCalibration(ADC1); + while(ADC_GetCalibrationStatus(ADC1)); + + ADC_SoftwareStartConvCmd(ADC1, ENABLE); /* because not using external interrupt to start collect, using software to start */ + +} + +float PB_Get_ADC_Output(uint8_t n) +{ + float ADC_Standard_Value = 0; + if(n <= ADC_EN_NUM + 1) + { + ADC_Standard_Value = ( (float)ADC_Sample_Value[n-1]/4096 ) * (float)Reference_Voltage; + } + return ADC_Standard_Value; +} + +#define ADC1_DR_Address ((u32)0x40012400+0x4c) +#define V25 0x6EE +#define AVG_SLOPE 0x05 + +float PB_Get_CPU_Temperature(void) +{ + cpu_temperature = 0.8f*cpu_temperature + 0.2f*(((float)V25- PB_Get_ADC_Output(ADC_EN_NUM + 1)) / (float)AVG_SLOPE+25) ; + return cpu_temperature; +} + +void PB_DAC_Init(uint8_t channel_x) +{ + GPIO_InitTypeDef GPIO_InitStructure; + DAC_InitTypeDef DAC_InitType; + + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE ); //enable PORTA clock + RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE ); //enable DAC clock + + DAC_InitType.DAC_Trigger=DAC_Trigger_None; //disable trigger, TEN1=0 + DAC_InitType.DAC_WaveGeneration=DAC_WaveGeneration_None;//disable wave generate + DAC_InitType.DAC_LFSRUnmask_TriangleAmplitude=DAC_LFSRUnmask_Bit0;//mask amplitude set + DAC_InitType.DAC_OutputBuffer=DAC_OutputBuffer_Disable ; //disable DAC1 output cache, BOFF1=1 + + if(channel_x == DAC_Channel_1) + { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4; // GPIO configuration + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN; //Analog Input + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(GPIOA, &GPIO_InitStructure); + GPIO_SetBits(GPIOA,GPIO_Pin_4) ; //PA.4 High output + + DAC_Init(DAC_Channel_1,&DAC_InitType); //initialize DAC output channel1 + DAC_Cmd(DAC_Channel_1, ENABLE); + DAC_SetChannel1Data(DAC_Align_12b_R, 0); //12 Bits align right mode to set value of DAC + + } + else if(channel_x == DAC_Channel_2) + { + + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5; // GPIO Configuration + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN; //Analog Input + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(GPIOA, &GPIO_InitStructure); + GPIO_SetBits(GPIOA,GPIO_Pin_5) ; //PA.4 High output + + DAC_Init(DAC_Channel_2,&DAC_InitType); //initialize DAC output channel1 + DAC_Cmd(DAC_Channel_2, ENABLE); + DAC_SetChannel2Data(DAC_Align_12b_R, 0); //12 Bits align right mode to set value of DAC + + } +} + +void PB_DAC_Set_Vol(uint8_t channel_x , uint16_t vol) +{ + float temp=vol; + temp/=1000; + temp=temp*4096/(float)3.3; + if( channel_x == DAC_Channel_1){ + DAC_SetChannel1Data(DAC_Align_12b_R,temp);//12 Bits align right mode to set value of DAC + } + else if(channel_x == DAC_Channel_2){ + DAC_SetChannel2Data(DAC_Align_12b_R,temp);//12 Bits align right mode to set value of DAC + } +} + +#ifdef __cplusplus +} +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/adc_dac.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/adc_dac.h new file mode 100644 index 0000000..3e5ed7e --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/adc_dac.h @@ -0,0 +1,23 @@ +#ifndef ADC_DAC_H +#define ADC_DAC_H + + +#ifdef __cplusplus +extern "C" { +#endif + +#include "stm32f10x.h" + +void PB_ADC_Init(uint16_t adc_channel , uint8_t adc_num , float Reference_Voltage_); +float PB_Get_ADC_Output(uint8_t n); +float PB_Get_CPU_Temperature(void); //°C + +void PB_DAC_Init(uint8_t channel_x); + +void PB_DAC_Set_Vol(uint8_t channel_x , uint16_t vol); + +#ifdef __cplusplus +} +#endif + +#endif // #ifndef ADC_DAC_H diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/bsplib.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/bsplib.h new file mode 100644 index 0000000..3fa2358 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/bsplib.h @@ -0,0 +1,22 @@ + +#ifndef BSPLIB_H +#define BSPLIB_H + +#include "nvic.h" +#include "delay.h" +#include "rtc.h" +#include "wdg_wkup.h" +#include "flash.h" +#include "usart.h" +#include "adc_dac.h" +#include "timer.h" +#include "pwm_in.h" +#include "pwm_out.h" +#include "encoder.h" +#include "i2c.h" +#include "spi.h" + +#endif //#ifndef BSPLIB_H + + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/delay.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/delay.c new file mode 100644 index 0000000..0c91fb4 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/delay.c @@ -0,0 +1,80 @@ +#ifdef __cplusplus +extern "C" { +#endif + +#include "delay.h" + +float count_time = 0; +float count_us = 0; +float count_ms = 0; +float reload = 0; + + +void PB_System_Timer_Init(void) +{ + SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK_Div8);//clear bit2, and using external clock HCK/8 + count_us=SystemCoreClock / 8000000; + count_ms=(uint16_t)count_us * 1000; + reload = 16777215; + + SysTick->CTRL|=SysTick_CTRL_TICKINT_Msk; //enable SYSTICK interrupt + SysTick->LOAD=reload; //enter interrupt every 1/delay_ostickspersec second + SysTick->VAL = reload; + SysTick->CTRL|=SysTick_CTRL_ENABLE_Msk; //enable SYSTICK +} + + +void SysTick_Handler(void) +{ + count_time++; + if(count_time >= 0xffffffff) + { + count_time=0; + } +} + +float PB_Get_System_Time(void) +{ + float count , time; + count = (float)( (reload + 1 - SysTick->VAL) + (float)(reload + 1) * count_time ); + time = count/count_us; + return time; +} + +float PB_Get_Dtime(void) +{ + static float lasttime ; + float temp1,temp2; + temp1 = PB_Get_System_Time(); + temp2 = temp1 - lasttime; + if(temp2 < 0) + { + temp2 = ( ( (float)(reload + 1) * (float)0xffffffff) / count_us) - lasttime + temp1; + } + lasttime = temp1; + return temp2; +} + +void delay_us(unsigned short int t) +{ + int i; + for( i=0;i3257.8 days +float PB_Get_Dtime(void); // Return the time difference(us). max:655s + +#ifdef __cplusplus +} +#endif + +#endif // #ifndef DELAY_H diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/encoder.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/encoder.c new file mode 100644 index 0000000..5873ba4 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/encoder.c @@ -0,0 +1,145 @@ +#ifdef __cplusplus +extern "C" { +#endif + +#include "encoder.h" +#include "nvic.h" + +void PB_Encoder_Init(TIM_TypeDef* TIMx , unsigned char GPIO_AF) //Initialize encoder mode, input parameter TIM1 TIM2 TIM3 +{ + TIM_ICInitTypeDef TIM_ICInitStructure; + GPIO_InitTypeDef GPIO_InitStructure; + + if( TIMx == TIM2){ + + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2 , ENABLE); /* enable clock */ + if(GPIO_AF == 0){ + //---------------------------------------------------------------TIM2 CHI1 CHI2---PA0 PA1; + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA , ENABLE); + GPIO_StructInit(&GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(GPIOA, &GPIO_InitStructure); + } + else if(GPIO_AF == 1){ + //---------------------------------------------------------------TIM2 CHI1 CHI2---PA15 PB3; + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_AFIO , ENABLE); + GPIO_PinRemapConfig(GPIO_FullRemap_TIM2,ENABLE); + GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable,ENABLE);// This is very important! + + GPIO_StructInit(&GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_15; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(GPIOA, &GPIO_InitStructure); + + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(GPIOB, &GPIO_InitStructure); + } + TIM2_NVIC_Configuration(); //enable interrupt + } + + else if( TIMx == TIM3){ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3|RCC_APB2Periph_GPIOB|RCC_APB2Periph_GPIOA , ENABLE); /* enable clock */ + if(GPIO_AF == 0){ + //---------------------------------------------------------------TIM3 CHI1 CHI2---PA6 PA7; + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA , ENABLE); + GPIO_StructInit(&GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(GPIOA, &GPIO_InitStructure); + } + else if (GPIO_AF == 1){ + //---------------------------------------------------------------TIM3 CHI1 CHI2---PB4 PB5; + GPIO_PinRemapConfig(GPIO_PartialRemap_TIM3,ENABLE); + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB , ENABLE); + GPIO_StructInit(&GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4 | GPIO_Pin_5; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(GPIOB, &GPIO_InitStructure); + } + TIM3_NVIC_Configuration(); //enable interrupt + + } + + else if( TIMx == TIM4){ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4 , ENABLE); /* enable clock */ + if(GPIO_AF == 0){ + //---------------------------------------------------------------TIM4 CHI1 CHI2---PB6 PB7; + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB , ENABLE); + GPIO_StructInit(&GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(GPIOB, &GPIO_InitStructure); + } + else if (GPIO_AF == 1){ + //---------------------------------------------------------------TIM4 CHI1 CHI2---PD12 PD13; + GPIO_PinRemapConfig(GPIO_Remap_TIM4,ENABLE); + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD , ENABLE); + GPIO_StructInit(&GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12 | GPIO_Pin_13; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(GPIOD, &GPIO_InitStructure); + + } + TIM4_NVIC_Configuration(); + + } + else if( TIMx == TIM5){ + + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM5 , ENABLE); + + if(GPIO_AF == 0){ + //---------------------------------------------------------------TIM5 CHI1 CHI2---PA0 PA1; + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA , ENABLE); + GPIO_StructInit(&GPIO_InitStructure); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(GPIOA, &GPIO_InitStructure); + } + TIM5_NVIC_Configuration(); + } + + TIM_EncoderInterfaceConfig(TIMx, TIM_EncoderMode_TI12,TIM_ICPolarity_Rising, TIM_ICPolarity_Rising); + TIM_ICStructInit(&TIM_ICInitStructure); + TIM_ICInitStructure.TIM_ICFilter = 1; + TIM_ICInit(TIMx, &TIM_ICInitStructure); + TIM_Cmd(TIMx, ENABLE); + TIMx->CNT = 0x7fff; +} + +float PB_Get_Encode_TIM2(void) +{ + float cnt; + cnt = (float)((uint16_t)0x7fff) - (float)((uint16_t)(TIM2->CNT)) ; //! (float) is must + TIM2->CNT = 0x7fff; + return cnt; +} + +float PB_Get_Encode_TIM3(void) +{ + float cnt; + cnt = (float)((uint16_t)0x7fff) - (float)((uint16_t)(TIM3->CNT)) ; + TIM3->CNT = 0x7fff; + return cnt; +} + +float PB_Get_Encode_TIM4(void) +{ + float cnt; + cnt = (float)((uint16_t)0x7fff) - (float)((uint16_t)(TIM4->CNT)) ; + TIM4->CNT = 0x7fff; + return cnt; +} + +float PB_Get_Encode_TIM5(void) +{ + float cnt; + cnt = (float)((uint16_t)0x7fff) - (float)((uint16_t)(TIM5->CNT)) ; + TIM5->CNT = 0x7fff; + return cnt; +} + +#ifdef __cplusplus +} +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/encoder.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/encoder.h new file mode 100644 index 0000000..7f03a0c --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/encoder.h @@ -0,0 +1,22 @@ +#ifndef ENCODER_H +#define ENCODER_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "stm32f10x.h" + +void PB_Encoder_Init(TIM_TypeDef* TIMx , unsigned char GPIO_AF); +float PB_Get_Encode_TIM5(void);//What you get here is the total angle. +float PB_Get_Encode_TIM4(void); +float PB_Get_Encode_TIM3(void); +float PB_Get_Encode_TIM2(void); + +#ifdef __cplusplus +} +#endif + +#endif // #ifndef ENCODER_H + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/flash.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/flash.c new file mode 100644 index 0000000..e386462 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/flash.c @@ -0,0 +1,55 @@ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "flash.h" + + +u16 PB_Flash_ReadHalfWord(u32 faddr){ + uint16_t val = 0; + faddr = faddr + FLASH_SAVE_ADDR; + val = *(uint16_t*)faddr; + + return val; +} + +u32 PB_Flash_ReadWord(u32 faddr){ + uint16_t val = 0; + faddr = faddr + FLASH_SAVE_ADDR; + val = *(uint32_t*)faddr; + + return val; +} +#define PageSize 0x400 +void PB_Flash_EnableWrite(){ + /*FLASH_Unlock(); + FLASH_ErasePage(FLASH_SAVE_ADDR); + CLEAR_BIT(FLASH->CR, FLASH_CR_PER);*/ + FLASH_Unlock(); + FLASH_ClearFlag(FLASH_FLAG_BSY|FLASH_FLAG_EOP|FLASH_FLAG_PGERR|FLASH_FLAG_WRPRTERR); + FLASH_ErasePage(FLASH_SAVE_ADDR); + //FLASH_ErasePage(FLASH_SAVE_ADDR + PageSize); +} + +void PB_Flash_DisableWrite(){ + FLASH_Lock(); +} + +u32 PB_Flash_WriteHalfWord(u32 faddr, u16 data){ + faddr = faddr +FLASH_SAVE_ADDR; + + return FLASH_ProgramHalfWord(faddr, data); +} + +u32 PB_Flash_WriteWord(u32 faddr, u32 data){ + faddr = faddr +FLASH_SAVE_ADDR; + + return FLASH_ProgramWord(faddr, data); +} + + + +#ifdef __cplusplus +} +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/flash.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/flash.h new file mode 100644 index 0000000..21dda1d --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/flash.h @@ -0,0 +1,25 @@ +#ifndef FLASH_H +#define FLASH_H +#ifdef __cplusplus +extern "C" { +#endif + +#include "stm32f10x.h" + +#define FLASH_SAVE_ADDR ((uint32_t)0x800FC00) + +u16 PB_Flash_ReadHalfWord(u32 faddr); +u32 PB_Flash_ReadWord(u32 faddr); + +void PB_Flash_EnableWrite(void); +void PB_Flash_DisableWrite(void); +u32 PB_Flash_WriteHalfWord(u32 faddr, u16 data); +u32 PB_Flash_WriteWord(u32 faddr, u32 data); + +#ifdef __cplusplus +} +#endif + +#endif // #ifndef FLASH_H + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/i2c.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/i2c.c new file mode 100644 index 0000000..38aaf13 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/i2c.c @@ -0,0 +1,226 @@ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "i2c.h" +#include "nvic.h" + +static void I2C_delay() +{ + volatile int i = 7; + while (i) + i--; +} + +static int I2C_Start() +{ + SDA_H; + SCL_H; + I2C_delay(); + if (!SDA_read) + return 0; + SDA_L; + I2C_delay(); + if (SDA_read) + return 0; + SDA_L; + I2C_delay(); + return 1; +} + +static void I2C_Stop() +{ + SCL_L; + I2C_delay(); + SDA_L; + I2C_delay(); + SCL_H; + I2C_delay(); + SDA_H; + I2C_delay(); +} + +static void I2C_Ack() +{ + SCL_L; + I2C_delay(); + SDA_L; + I2C_delay(); + SCL_H; + I2C_delay(); + SCL_L; + I2C_delay(); +} + +static void I2C_NoAck() +{ + SCL_L; + I2C_delay(); + SDA_H; + I2C_delay(); + SCL_H; + I2C_delay(); + SCL_L; + I2C_delay(); +} + +static int I2C_WaitAck() +{ + SCL_L; + I2C_delay(); + SDA_H; + I2C_delay(); + SCL_H; + I2C_delay(); + if (SDA_read) { + SCL_L; + return 0; + } + SCL_L; + return 1; +} + +static void I2C_SendByte(uint8_t b) +{ + uint8_t i = 8; + while (i--) { + SCL_L; + I2C_delay(); + if (b & 0x80) + SDA_H; + else + SDA_L; + b <<= 1; + I2C_delay(); + SCL_H; + I2C_delay(); + } + SCL_L; +} + +static uint8_t I2C_ReadByte() +{ + uint8_t i = 8; + uint8_t byte = 0; + + SDA_H; + while (i--) { + byte <<= 1; + SCL_L; + I2C_delay(); + SCL_H; + I2C_delay(); + if (SDA_read) { + byte |= 0x01; + } + } + SCL_L; + return byte; +} + +void PB_I2C_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + //已更改 + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB , ENABLE); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10 | GPIO_Pin_11; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD; + GPIO_Init(GPIOB, &GPIO_InitStructure); +} + +int PB_I2C_Write_Byte(uint8_t addr, uint8_t reg, uint8_t data) +{ + if (!I2C_Start()) + return 0; + I2C_SendByte(addr << 1 | I2C_Direction_Transmitter); + if (!I2C_WaitAck()) { + I2C_Stop(); + return 0; + } + I2C_SendByte(reg); + I2C_WaitAck(); + I2C_SendByte(data); + if (!I2C_WaitAck()) { + I2C_Stop(); + return 0; + } + I2C_Stop(); + return 1; +} + +int PB_I2C_Write_Buf(uint8_t addr, uint8_t reg, uint8_t *data , uint8_t size) +{ + int i; + if (!I2C_Start()) + return 0; + I2C_SendByte(addr << 1 | I2C_Direction_Transmitter); + if (!I2C_WaitAck()) { + I2C_Stop(); + return 0; + } + I2C_SendByte(reg); + I2C_WaitAck(); + for (i = 0; i < size; i++) { + I2C_SendByte(data[i]); + if (!I2C_WaitAck()) { + I2C_Stop(); + return 0; + } + } + I2C_Stop(); + return 1; +} + +int PB_I2C_Read_Byte(uint8_t addr, uint8_t reg, uint8_t* data) +{ + if (!I2C_Start()) + return 0; + I2C_SendByte(addr << 1 | I2C_Direction_Transmitter); + if (!I2C_WaitAck()) { + I2C_Stop(); + return 0; + } + I2C_SendByte(reg); + I2C_WaitAck(); + I2C_Start(); + I2C_SendByte(addr << 1 | I2C_Direction_Receiver); + I2C_WaitAck(); + *data = I2C_ReadByte(); + I2C_NoAck(); + I2C_Stop(); + return 1; +} + +int PB_I2C_Read_Buf(uint8_t addr,uint8_t reg, uint8_t* data , uint8_t size) +{ + if (!I2C_Start()) + return 0; + I2C_SendByte(addr << 1 | I2C_Direction_Transmitter); + if (!I2C_WaitAck()) { + I2C_Stop(); + return 0; + } + I2C_SendByte(reg); + I2C_WaitAck(); + I2C_Start(); + I2C_SendByte(addr << 1 | I2C_Direction_Receiver); + I2C_WaitAck(); + while (size) { + *data = I2C_ReadByte(); + if (size == 1) + I2C_NoAck(); + else + I2C_Ack(); + data++; + size--; + } + I2C_Stop(); + return 1; +} + +#ifdef __cplusplus +} +#endif + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/i2c.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/i2c.h new file mode 100644 index 0000000..a8eba9f --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/i2c.h @@ -0,0 +1,34 @@ +#ifndef __i2c_H__ +#define __i2c_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "stm32f10x.h" + +#define SCL_H GPIOB->BSRR = GPIO_Pin_10 +#define SCL_L GPIOB->BRR = GPIO_Pin_10 + +#define SDA_H GPIOB->BSRR = GPIO_Pin_11 +#define SDA_L GPIOB->BRR = GPIO_Pin_11 + +#define SCL_read GPIOB->IDR & GPIO_Pin_10 +#define SDA_read GPIOB->IDR & GPIO_Pin_11 + +/*********************************************************************************************************************/ + +void PB_I2C_Init(void); +int PB_I2C_Write_Byte(uint8_t addr, uint8_t reg, uint8_t data); +int PB_I2C_Write_Buf(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t size); +int PB_I2C_Read_Byte(uint8_t addr, uint8_t reg, uint8_t* data); +int PB_I2C_Read_Buf(uint8_t addr,uint8_t reg, uint8_t* data, uint8_t size); + + +#ifdef __cplusplus +} +#endif + +#endif //__i2c_H__ + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/nvic.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/nvic.c new file mode 100644 index 0000000..38a31cc --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/nvic.c @@ -0,0 +1,217 @@ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "nvic.h" + + +void CAN1_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; //PreemptionPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; //SubPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //ENABLE Interrupt + NVIC_Init(&NVIC_InitStructure); +} + +void CAN2_NVIC_Configuration(void) +{ + // NVIC_InitTypeDef NVIC_InitStructure; + // NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + // NVIC_InitStructure.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn; + // NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; //PreemptionPriority 0--4 Lower value, Higher Priority. + // NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; //SubPriority 0--4 Lower value, Higher Priority. + // NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //ENABLE Interrupt + // NVIC_Init(&NVIC_InitStructure); +} + +void USART1_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; //PreemptionPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; //SubPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //ENABLE Interrupt + NVIC_Init(&NVIC_InitStructure); +} + +void USART2_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; //PreemptionPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; // SubPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //ENABLE Interrupt + NVIC_Init(&NVIC_InitStructure); +} + +void USART3_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = USART3_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; //PreemptionPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; //SubPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //ENABLE Interrupt + NVIC_Init(&NVIC_InitStructure); +} + +void UART4_NVIC_Configuration(void) +{ + +} + +void UART5_NVIC_Configuration(void) +{ + +} + +void TIM1_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = TIM1_UP_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; //PreemptionPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; //SubPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //ENABLE Interrupt + NVIC_Init(&NVIC_InitStructure); +} + +void TIM2_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; //PreemptionPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; //SubPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //ENABLE Interrupt + NVIC_Init(&NVIC_InitStructure); +} + +void TIM3_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = TIM3_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; //PreemptionPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; //SubPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //ENABLE Interrupt + NVIC_Init(&NVIC_InitStructure); +} + +void TIM4_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = TIM4_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; //PreemptionPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; //SubPriority 0--4 Lower value, Higher Priority. + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //ENABLE Interrupt + NVIC_Init(&NVIC_InitStructure); +} + +void TIM5_NVIC_Configuration(void) +{ + +} + +void TIM6_NVIC_Configuration(void) +{ + +} + +void TIM7_NVIC_Configuration(void) +{ + +} + +void TIM8_NVIC_Configuration(void) +{ + +} + +void EXTI0_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} + +void EXTI1_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = EXTI1_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} + +void EXTI2_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = EXTI2_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} + +void EXTI3_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = EXTI3_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} + +void EXTI4_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = EXTI4_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} + +void EXTI9_5_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + NVIC_InitStructure.NVIC_IRQChannel = EXTI9_5_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} + +void EXTI15_10_NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_InitStructure.NVIC_IRQChannel = EXTI15_10_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority= 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} + + +#ifdef __cplusplus +} +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/nvic.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/nvic.h new file mode 100644 index 0000000..872fbea --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/nvic.h @@ -0,0 +1,37 @@ +#ifndef NVIC_H +#define NVIC_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "stm32f10x.h" + +void CAN1_NVIC_Configuration(void); +void CAN2_NVIC_Configuration(void); +void USART1_NVIC_Configuration(void); +void USART2_NVIC_Configuration(void); +void USART3_NVIC_Configuration(void); +void UART4_NVIC_Configuration(void); +void UART5_NVIC_Configuration(void); +void TIM1_NVIC_Configuration(void); +void TIM2_NVIC_Configuration(void); +void TIM3_NVIC_Configuration(void); +void TIM4_NVIC_Configuration(void); +void TIM5_NVIC_Configuration(void); +void TIM6_NVIC_Configuration(void); +void TIM7_NVIC_Configuration(void); +void TIM8_NVIC_Configuration(void); +void EXTI0_NVIC_Configuration(void); +void EXTI1_NVIC_Configuration(void); +void EXTI2_NVIC_Configuration(void); +void EXTI3_NVIC_Configuration(void); +void EXTI4_NVIC_Configuration(void); +void EXTI9_5_NVIC_Configuration(void); +void EXTI15_10_NVIC_Configuration(void); + +#ifdef __cplusplus +} +#endif + +#endif // #ifndef NVIC_H diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/pwm_in.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/pwm_in.c new file mode 100644 index 0000000..d468af0 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/pwm_in.c @@ -0,0 +1,193 @@ +#ifdef __cplusplus +extern "C" { +#endif + +#include "pwm_in.h" +#include "nvic.h" +#include "delay.h" + +static float PWM_Input_CH[5]; //current input value of PWM (Unit:us) + +void PB_PwmIn_Init(uint8_t pwmin_channel) +{ + + GPIO_InitTypeDef GPIO_InitStructure; + EXTI_InitTypeDef EXTI_InitStructure; + + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC | RCC_APB2Periph_AFIO,ENABLE); + //RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); + + //if enable this channel + if( pwmin_channel == 0) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 ; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; // input pull down + GPIO_Init(GPIOC, &GPIO_InitStructure); + + GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource0); /* EXTI line(PC0) mode config */ + EXTI_InitStructure.EXTI_Line = EXTI_Line0; + EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; //interrupt mode + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling; //enable interrupt of posedge and negedge + EXTI_InitStructure.EXTI_LineCmd = ENABLE; //enable interrupt + EXTI_Init(&EXTI_InitStructure); + + EXTI0_NVIC_Configuration() ; + } + + //if enable this channel + if( pwmin_channel == 1) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1 ; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; //input pull down + GPIO_Init(GPIOC, &GPIO_InitStructure); + + GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource1); /* EXTI line(PC0) mode config */ + EXTI_InitStructure.EXTI_Line = EXTI_Line1; + EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; //interrupt mode + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling; //enable interrupt of posedge and negedge + EXTI_InitStructure.EXTI_LineCmd = ENABLE; //enable interrupt + EXTI_Init(&EXTI_InitStructure); + + EXTI1_NVIC_Configuration() ; + } + + //if enable this channel + if( pwmin_channel == 2) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2 ; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; // input pull down + GPIO_Init(GPIOC, &GPIO_InitStructure); + + GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource2); /* EXTI line(PC0) mode config */ + EXTI_InitStructure.EXTI_Line = EXTI_Line2; + EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; //interrupt mode + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling; //enable interrupt of posedge and negedge + EXTI_InitStructure.EXTI_LineCmd = ENABLE; //enable interrupt + EXTI_Init(&EXTI_InitStructure); + + EXTI2_NVIC_Configuration() ; + } + + //if enable this channel + if( pwmin_channel == 3) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3 ; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; // input pull down + GPIO_Init(GPIOC, &GPIO_InitStructure); + + GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource3); /* EXTI line(PC0) mode config */ + EXTI_InitStructure.EXTI_Line = EXTI_Line3; + EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; //interrupt mode + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling; //enable interrupt of posedge and negedge + EXTI_InitStructure.EXTI_LineCmd = ENABLE; //enable interrupt + EXTI_Init(&EXTI_InitStructure); + + EXTI3_NVIC_Configuration() ; + } + + //if enable this channel + if( pwmin_channel == 4) { + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4 ; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; // input pull down + GPIO_Init(GPIOC, &GPIO_InitStructure); + + GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource4); /* EXTI line(PC0) mode config */ + EXTI_InitStructure.EXTI_Line = EXTI_Line4; + EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; //interrupt mode + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling; //enable interrupt of posedge and negedge + EXTI_InitStructure.EXTI_LineCmd = ENABLE; //enable interrupt + EXTI_Init(&EXTI_InitStructure); + + EXTI4_NVIC_Configuration() ; + } + +} + +float PB_Get_PWM_Value(uint8_t channel_x) +{ + return PWM_Input_CH[channel_x]; +} + +void EXTI1_IRQHandler(void) +{ + static float FallingTime=0 , RisingTime =0; + if( GPIOC->IDR & 0x0002) + { + RisingTime = PB_Get_System_Time(); + } + else + { + FallingTime = PB_Get_System_Time(); + if(FallingTime < RisingTime){ return ;} + else + { + PWM_Input_CH[0] = FallingTime - RisingTime; + } + } + EXTI->PR=1<<1; //clear interrupt flag +} + + +//interrupt program of interrupt line2 +void EXTI2_IRQHandler(void) +{ + static float FallingTime=0 , RisingTime =0; + if( GPIOC->IDR & 0x0004) + { + RisingTime = PB_Get_System_Time(); + } + else + { + FallingTime = PB_Get_System_Time(); + if(FallingTime < RisingTime){return ;} + else + { + PWM_Input_CH[1] = FallingTime - RisingTime; + } + } + EXTI->PR=1<<2; //clear interrupt flag +} + +//interrupt program of interrupt line3 +void EXTI3_IRQHandler(void) +{ + static float FallingTime=0 , RisingTime =0; + if( GPIOC->IDR & 0x0008) + { + RisingTime = PB_Get_System_Time(); + } + else + { + FallingTime = PB_Get_System_Time(); + if(FallingTime < RisingTime){ return ;} + else + { + PWM_Input_CH[3] = FallingTime - RisingTime; + } + } + EXTI->PR=1<<3; //clear interrupt flag +} + + +//interrupt program of interrupt line4 +void EXTI4_IRQHandler(void) +{ + static float FallingTime=0 , RisingTime =0; + if( GPIOC->IDR & 0x0010) + { + RisingTime = PB_Get_System_Time(); + } + else + { + FallingTime = PB_Get_System_Time(); + if(FallingTime < RisingTime){ return ;} + else + { + PWM_Input_CH[4] = FallingTime - RisingTime; + } + + } + EXTI->PR=1<<4; //clear interrupt flag +} + + +#ifdef __cplusplus +} +#endif + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/pwm_in.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/pwm_in.h new file mode 100644 index 0000000..ab98042 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/pwm_in.h @@ -0,0 +1,26 @@ +#ifndef __pwm_in_H__ +#define __pwm_in_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "stm32f10x.h" + +#define PWM_Input_CH0_ENABLE 1 // if use this channel to capture PWM PC0 +#define PWM_Input_CH1_ENABLE 0 // if use this channel to capture PWM PC1 +#define PWM_Input_CH2_ENABLE 0 // if use this channel to capture PWM PC2 +#define PWM_Input_CH3_ENABLE 0 // if use this channel to capture PWM PC3 +#define PWM_Input_CH4_ENABLE 0 // if use this channel to capture PWM PC4 + +//void PWM_Input_Init(void); +void PB_PwmIn_Init(uint8_t pwmin_channel); +float PB_Get_PWM_Value(uint8_t channel_x); //current input value of PWM (Unit:us) + +#ifdef __cplusplus +} +#endif + +#endif //__pwm_in_H__ + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/pwm_out.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/pwm_out.c new file mode 100644 index 0000000..2a3d054 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/pwm_out.c @@ -0,0 +1,152 @@ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "pwm_out.h" + +void PB_PWMChannel_Init(TIM_TypeDef* TIMx, uint8_t Channel, uint16_t Prescaler,uint16_t Period, uint8_t GPIO_AF) +{ + GPIO_InitTypeDef GPIO_InitStructure; + TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; + TIM_OCInitTypeDef TIM_OCInitStructure; + + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); //使能GPIO外设和AFIO复用功能模块时钟 + + if (TIMx == TIM1) { + RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1, ENABLE); + if (GPIO_AF == 0) { + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); + /******************************TIM1 Multiplexing Push-pull output*********************************************/ + if (Channel == 1) + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8; + else if(Channel == 2) + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; + else if(Channel == 3) + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; + else if(Channel == 4) + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11; + else return; + GPIO_Init(GPIOA, &GPIO_InitStructure); + } else if (GPIO_AF == 1 ) { + } + } else if (TIMx == TIM2) { + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE); + if (GPIO_AF == 0 ) { + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); + /******************************TIM1 Multiplexing Push-pull output*********************************************/ + if (Channel == 1) + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; + else if (Channel == 2) + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1; + else if (Channel == 3) + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; + else if (Channel == 4) + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3; + else return; + GPIO_Init(GPIOA, &GPIO_InitStructure); + } else if (GPIO_AF == 1) { + } + } else if (TIMx == TIM3) { + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3,ENABLE); + if (GPIO_AF == 0) { + /******************************TIM1 Multiplexing Push-pull output*********************************************/ + if (Channel == 1) { + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6; + GPIO_Init(GPIOA, &GPIO_InitStructure); + } else if (Channel == 2) { + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7; + GPIO_Init(GPIOA, &GPIO_InitStructure); + } else if (Channel == 3) { + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; + GPIO_Init(GPIOB, &GPIO_InitStructure); + } else if (Channel == 4) { + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1; + GPIO_Init(GPIOB, &GPIO_InitStructure); + } else + return; + } else if (GPIO_AF == 1) { + GPIO_Init(GPIOC, &GPIO_InitStructure); + } + } else if (TIMx == TIM4) { + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4,ENABLE); + if (GPIO_AF == 0) { + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); + /******************************TIM1 Multiplexing Push-pull output*********************************************/ + if (Channel == 1) + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6; + else if (Channel == 2) + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7; + else if (Channel == 3) + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8; + else if (Channel == 4) + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; + else + return; + GPIO_Init(GPIOB, &GPIO_InitStructure); + } else if (GPIO_AF == 1) { + } + } + + TIM_TimeBaseStructure.TIM_Prescaler = Prescaler; + TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; + TIM_TimeBaseStructure.TIM_Period = Period; + TIM_TimeBaseStructure.TIM_ClockDivision = 0; + TIM_TimeBaseStructure.TIM_RepetitionCounter = 0; + + TIM_TimeBaseInit(TIMx, &TIM_TimeBaseStructure); + + TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM2; + TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable; + TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Disable; + TIM_OCInitStructure.TIM_Pulse =0; + TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_Low; + TIM_OCInitStructure.TIM_OCNPolarity = TIM_OCNPolarity_High; + TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Set; + TIM_OCInitStructure.TIM_OCNIdleState = TIM_OCIdleState_Reset; + TIM_OCInitStructure.TIM_Pulse = 0; + + if (Channel == 1) { + TIM_OC1Init(TIMx, &TIM_OCInitStructure); + } else if (Channel == 2) { + TIM_OC2Init(TIMx, &TIM_OCInitStructure); + } else if (Channel == 3) { + TIM_OC3Init(TIMx, &TIM_OCInitStructure); + } else if (Channel == 4) { + TIM_OC4Init(TIMx, &TIM_OCInitStructure); + } else + return; + + TIM_Cmd(TIMx, ENABLE); + TIM_CtrlPWMOutputs(TIMx, ENABLE); +} + +//Set Pulse Width +void PB_Set_PWM(TIM_TypeDef* TIMx, uint8_t Channel, uint16_t Pwm_Value) +{ + uint16_t TIM_PWM_Period; + TIM_PWM_Period = TIMx->ARR; + if (Pwm_Value <= 0) Pwm_Value = 0; + if (Pwm_Value >= TIM_PWM_Period) + Pwm_Value = TIM_PWM_Period; + if (Channel == 1) { + TIM_SetCompare1(TIMx, Pwm_Value); + } else if (Channel == 2){ + TIM_SetCompare2(TIMx, Pwm_Value); + } else if (Channel == 3) { + TIM_SetCompare3(TIMx, Pwm_Value); + } else if (Channel == 4) { + TIM_SetCompare4(TIMx, Pwm_Value); + } else + return; +} + +#ifdef __cplusplus +} +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/pwm_out.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/pwm_out.h new file mode 100644 index 0000000..3d9867f --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/pwm_out.h @@ -0,0 +1,21 @@ +#ifndef PWM_OUT_H +#define PWM_OUT_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "stm32f10x.h" + +void PB_PWMChannel_Init(TIM_TypeDef* TIMx , uint8_t Channel , uint16_t Prescaler, + uint16_t Period, uint8_t GPIO_AF); + +void PB_Set_PWM(TIM_TypeDef* TIMx , uint8_t Channel , uint16_t Pwm_Value); + +#ifdef __cplusplus +} +#endif + +#endif // #ifndef PWM_OUT_H + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/rtc.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/rtc.c new file mode 100644 index 0000000..ce8bd21 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/rtc.c @@ -0,0 +1,376 @@ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "rtc.h" +#include "delay.h" +#include "usart.h" + +//time structure +typedef struct +{ + volatile unsigned char hour; + volatile unsigned char min; + volatile unsigned char sec; + //Gregorian calendar + volatile unsigned short int w_year; + volatile unsigned char w_month; + volatile unsigned char w_date; + volatile unsigned char week; +}CALENDAR; + +CALENDAR calendar_r;//clock structure + +//month data table +unsigned char const table_week[12]={0,3,3,6,1,4,6,2,5,0,3,5}; //month correct data +//month data table of normal year +const unsigned char mon_table[12]={31,28,31,30,31,30,31,31,30,31,30,31}; + +/*********************************************************************************************************************** +* Function: static unsigned char Is_Leap_Year(unsigned short int year) +* +* Scope: +* +* Description: judge whether is leap year +* month 1 2 3 4 5 6 7 8 9 10 11 12 +* leap year 31 29 31 30 31 30 31 31 30 31 30 31 +* not leap year 31 28 31 30 31 30 31 31 30 31 30 31 +* Input : Year +* Arguments: +* +* Return: 1,is leap year +* 0,not is leap year +* Cpu_Time: +* +* History: +************************************************************************************************************************/ +static unsigned char Is_Leap_Year(unsigned short int year) +{ + if(year%4==0) //must be divisible by 4 + { + if(year%100==0) + { + if(year%400==0)return 1;//If end is 00, must be divisible by 400 + else return 0; + }else return 1; + }else return 0; +} + +/************************************************************************************************************************ +* Function: unsigned char RTC_Get_Week(unsigned short int year,unsigned char month,unsigned char day) +* +* Scope: +* +* Description: Input date data to get week data +* legal input is 1901-2099 +* year,month,day：Gregorian calendar date +* +* Arguments: +* +* Return: week data +* +* Cpu_Time: +* +* History: +*************************************************************************************************************************/ +unsigned char RTC_Get_Week(unsigned short int year,unsigned char month,unsigned char day) +{ + + unsigned short int temp2; + unsigned char yearH,yearL; + + yearH=year/100; yearL=year%100; + //if 21th century, year need add 100 + if (yearH>19)yearL+=100; + //leap year only calculate after 1900 + temp2=yearL+yearL/4; + temp2=temp2%7; + temp2=temp2+day+table_week[month-1]; + if (yearL%4==0&&month<3)temp2--; + temp2%=7; + if(temp2==0)temp2=7; + return temp2; + +} + +/************************************************************************************************************************* +* Function: static unsigned char RTC_Get(void) +* +* Scope: +* +* Description: get current time +* +* Arguments: +* +* Return: 0-->succeeded others-->failed +* +* Cpu_Time: +* +* History: +**************************************************************************************************************************/ +static unsigned char RTC_Get(void) +{ + static unsigned short int daycnt=0; + unsigned int timecount=0; + unsigned int temp=0; + unsigned short int temp1=0; + timecount=RTC_GetCounter(); + temp=timecount/86400; //get days(correspond the second) + if(daycnt!=temp)//over one day + { + daycnt=temp; + temp1=1970; //start at 1970 + while(temp>=365) + { + if(Is_Leap_Year(temp1))//is leap year + { + if(temp>=366)temp-=366;//the seconds of leap year + else {temp1++;break;} + } + else temp-=365; //normal year + temp1++; + } + calendar_r.w_year=temp1;//get year + temp1=0; + while(temp>=28)//over one month + { + if(Is_Leap_Year(calendar_r.w_year)&&temp1==1)//judge if is leap month (February) + { + if(temp>=29)temp-=29;//the seconds of leap year + else break; + } + else + { + if(temp>=mon_table[temp1])temp-=mon_table[temp1];//normal year + else break; + } + temp1++; + } + calendar_r.w_month=temp1+1; //get month + calendar_r.w_date=temp+1; //get date + } + temp=timecount%86400; //get second + calendar_r.hour=temp/3600; //hour + calendar_r.min=(temp%3600)/60; //minute + calendar_r.sec=(temp%3600)%60; //second + calendar_r.week=RTC_Get_Week(calendar_r.w_year,calendar_r.w_month,calendar_r.w_date);//get week + return 0; +} + +/************************************************************************************************************************* +* Function: RTC_NVIC_Config(void) +* +* Scope: private +* +* Description: RTC Configuration of Interruption +* +* Arguments: +* +* Return: +* +* Cpu_Time: +* +* History: +**************************************************************************************************************************/ +static void RTC_NVIC_Config(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_InitStructure.NVIC_IRQChannel = RTC_IRQn; //RTC Global Interrupt + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; //PreemptionPriority + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; //SubPriority + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //ENABLE the interrupt + NVIC_Init(&NVIC_InitStructure); //Initialize the NVIC register +} + +/************************************************************************************************************************* +* Function: RTC_IRQHandler(void) +* +* Scope: private +* +* Description: RTC Interruptation update every second +* +* Arguments: +* +* Return: +* +* Cpu_Time: +* +* History: +**************************************************************************************************************************/ +void RTC_IRQHandler(void) +{ + if (RTC_GetITStatus(RTC_IT_SEC) != RESET)//RTC Interruptation + { + RTC_Get();//更新时间 + } + if(RTC_GetITStatus(RTC_IT_ALR)!= RESET)//alarm clock interrupt + { + + RTC_ClearITPendingBit(RTC_IT_ALR); //clear clock interrupt + RTC_Get(); //update time + // printf("Alarm Time:%d-%d-%d %d:%d:%d\n",calendar_r.w_year,calendar_r.w_month,calendar_r.w_date,calendar_r.hour,calendar_r.min,calendar_r.sec);//输出闹铃时间 + + } + RTC_ClearITPendingBit(RTC_IT_SEC|RTC_IT_OW); //clear alarm clock interrupt + RTC_WaitForLastTask(); +} + +unsigned char PB_RTC_Init(void) +{ + + //check if is first configuration of RTC + unsigned char temp=0; + RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE); //ENABLE clock of PWR and BKP + PWR_BackupAccessCmd(ENABLE); //enable access of backup register + if (BKP_ReadBackupRegister(BKP_DR1) != 0x5050) //read data from backup register + { + BKP_DeInit(); //RESET backuo area + RCC_LSEConfig(RCC_LSE_ON); //set external LSE, and use LSE + while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET&&temp<250) //check if set flag of RCC, and wait LSE is ready + { + temp++; + delay_ms(10); + } + if(temp>=250) return 1;//Initialize clock failed, the Crystal has error + RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE); //set LSE to be the clock of RTC + RCC_RTCCLKCmd(ENABLE); //enable RTC + + RTC_WaitForLastTask(); //wait finish writing RTC register + RTC_WaitForSynchro(); //wait RTC sync + RTC_ITConfig(RTC_IT_SEC, ENABLE); //ENABLE RTC Interrupt + RTC_WaitForLastTask(); //wait finish writing RTC register + RTC_EnterConfigMode();/// allow to configure + RTC_SetPrescaler(32767); //set Prescaler + RTC_WaitForLastTask(); //wait finish writing RTC register + RTC_Set(2015,1,14,17,42,55); //set time + RTC_ExitConfigMode(); //quit configuration mode + BKP_WriteBackupRegister(BKP_DR1, 0X5050); //write user program data to assign backup register + } + else//system continue counting time + { + RTC_WaitForSynchro(); //wait finish writing RTC register + RTC_ITConfig(RTC_IT_SEC, ENABLE); //enable RTC interrupt + RTC_WaitForLastTask(); //wait finish writing RTC register + } + RTC_NVIC_Config();//RTC interrupt NVIC configure + RTC_Get();//update time + return 0; //ok + +} + +/************************************************************************************************************************* +* Function: unsigned char RTC_Set(unsigned short int syear,unsigned char smon,unsigned char sday,unsigned char hour,unsigned char min,unsigned char sec) +* +* Scope: public +* +* Description: set clock +* transform the time data to seconds +* time base is 1,1,1970 +* legal input is 1970~2099 +* +* Arguments: +* +* Return: 0-->succeeded others-->failed +* +* Cpu_Time: +* +* History: +**************************************************************************************************************************/ +unsigned char RTC_Set(unsigned short int syear,unsigned char smon,unsigned char sday,unsigned char hour,unsigned char min,unsigned char sec) +{ + unsigned short int t; + unsigned int seccount=0; + if(syear<1970||syear>2099)return 1; + for(t=1970;tsucceeded others-->failed +* +* Cpu_Time: +* +* History: +**************************************************************************************************************************/ +void RTC_Alarm_Set(unsigned short int syear,unsigned char smon,unsigned char sday,unsigned char hour,unsigned char min,unsigned char sec) +{ + unsigned short int t; + unsigned int seccount=0; + if(syear<1970||syear>2099)return ; + for(t=1970;t 0; i /= 10) + { + d = value / i; + + if (d || flag) + { + *ptr++ = (char)(d + 0x30); + value -= (d * i); + flag = 1; + } + } + + /* Null terminate the string. */ + *ptr = 0; + + return string; + +} /* NCL_Itoa */ + +void PB_USART_printf(USART_TypeDef* USARTx, uint8_t *Data,...) +{ + const char *s; + int d; + char buf[16]; + + va_list ap; + va_start(ap, Data); + + while ( *Data != 0) // 判断是否到达字符串结束符 + { + if ( *Data == 0x5c ) //'\' + { + switch ( *++Data ) + { + case 'r': //回车符 + USART_SendData(USARTx, 0x0d); + Data ++; + break; + + case 'n': //换行符 + USART_SendData(USARTx, 0x0a); + Data ++; + break; + + default: + Data ++; + break; + } + } + else if ( *Data == '%') + { + switch ( *++Data ) + { + case 's': //字符串 + s = va_arg(ap, const char *); + for ( ; *s; s++) + { + USART_SendData(USARTx,*s); + while( USART_GetFlagStatus(USARTx, USART_FLAG_TC) == RESET ); + } + Data++; + break; + + case 'd': //十进制 + d = va_arg(ap, int); + itoa(d, buf, 10); + for (s = buf; *s; s++) + { + USART_SendData(USARTx,*s); + while( USART_GetFlagStatus(USARTx, USART_FLAG_TC) == RESET ); + } + Data++; + break; + default: + Data++; + break; + } + } /* end of else if */ + else USART_SendData(USARTx, *Data++); + while( USART_GetFlagStatus(USARTx, USART_FLAG_TC) == RESET ); + } +} + +#ifdef __cplusplus +} +#endif + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/usart.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/usart.h new file mode 100644 index 0000000..daad000 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/usart.h @@ -0,0 +1,25 @@ +#ifndef USART_H +#define USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "stm32f10x.h" +#include "stdarg.h" +#include "stdio.h" + +//Initilaize the serial, First Parameter:USART1,USART2,USART3; 2nd Para:bits rate; 3rd: IO reuse +void PB_USART_Init(uint8_t USART_Channel ,unsigned int BaudRate,unsigned char GPIO_AF); +void PB_USART_Put_Char(uint8_t USART_Channel , unsigned char Tx_Byte); //USARTx to print 1 byte +void PB_USART_printf(USART_TypeDef* USARTx, uint8_t *Data, ...); //format output as printf in C standard library + +//int fputc(int ch, FILE *f); + +#ifdef __cplusplus +} +#endif + +#endif // #ifndef USART_H + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/wdg_wkup.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/wdg_wkup.c new file mode 100644 index 0000000..e93475a --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/wdg_wkup.c @@ -0,0 +1,130 @@ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "wdg_wkup.h" +#include "delay.h" + +void PB_IWDG_Init(void) +{ + IWDG_WriteAccessCmd(IWDG_WriteAccess_Enable); //Enable access to write register + IWDG_SetPrescaler(IWDG_Prescaler_64); //Frequency: 40K / 64 = 0.625K, and one cycle is 1.6ms + IWDG_SetReload(800); //800*1.6ms = 1.28S + IWDG_ReloadCounter(); //the program to feed dog, if not write 0xAAAA every while, WDG will reset + IWDG_Enable(); //enable +} + +void PB_IWDG_Feed(void) +{ + IWDG_ReloadCounter(); +} + +static void WWDG_NVIC_Init() +{ + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_InitStructure.NVIC_IRQChannel = WWDG_IRQn; //WWDG interrupt + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; //PreemptionPriority + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; //SubPriority + NVIC_Init(&NVIC_InitStructure);//NVIC initialization +} + +u8 WWDG_CNT=0x7f; +void PB_WWDG_Init(u8 tr,u8 wr,u32 fprer) +{ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_WWDG, ENABLE); // enable WWDG clock + WWDG_SetPrescaler(fprer); //set IWDG Prescaler + WWDG_SetWindowValue(wr); //set window value + WWDG_Enable(tr); //enable WWDG, and set counter + WWDG_ClearFlag(); + WWDG_NVIC_Init(); //initialize WWDG NVIC + WWDG_EnableIT(); //enable interrupt of WWDG +} + +void PB_WWDG_Set_Counter(u8 cnt) +{ + WWDG_Enable(cnt); +} + +void PB_WWDG_IRQHandler(void) +{ + + WWDG_SetCounter(0x7F); //if annotate this words, WWDG will reset + WWDG_ClearFlag(); //clear flag of advance wake up +} + + +static void Sys_Standby(void) +{ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE); //ENABLE PWR clock + PWR_WakeUpPinCmd(ENABLE); //enable the wake-up Pin + PWR_EnterSTANDBYMode(); //enter standby mode +} + +static void Sys_Enter_Standby(void) +{ + RCC_APB2PeriphResetCmd(0X01FC,DISABLE); //RESET all IO + Sys_Standby(); +} + +static u8 Check_WKUP(void) +{ + u8 t=0; //recording the time when pressing + // LED0=0; + while(1) + { + if(WKUP_KD) + { + t++; //have pressed + delay_ms(30); + if(t>=100) //having been pressed over 3s + { + // LED0=0; //light DS0 + return 1; //having been pressed over 3s + } + }else + { + // LED0=1; + return 0; //having been pressed short 3s + } + } +} + +void PB_WKUP_Init(void) +{ + + GPIO_InitTypeDef GPIO_InitStructure; + NVIC_InitTypeDef NVIC_InitStructure; + EXTI_InitTypeDef EXTI_InitStructure; + + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_AFIO, ENABLE); + + GPIO_InitStructure.GPIO_Pin =GPIO_Pin_0; //PA.0 + GPIO_InitStructure.GPIO_Mode =GPIO_Mode_IPD;//pull up input + GPIO_Init(GPIOA, &GPIO_InitStructure); //Initialize IO + //use external interrupt + GPIO_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource0); //connect Interrupt Line 0 with GPIOA + + EXTI_InitStructure.EXTI_Line = EXTI_Line0; //set all line of key + EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; //use external interrupt mode + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; //response at posedge + EXTI_InitStructure.EXTI_LineCmd = ENABLE; + EXTI_Init(&EXTI_InitStructure); // initialize external interruption + + NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn; //enable external interrupt line of key + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; //enable external interrupt channel + NVIC_Init(&NVIC_InitStructure); + + if(Check_WKUP()==0) Sys_Standby(); //enter standby mode + +} + +#ifdef __cplusplus +} +#endif + + + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/wdg_wkup.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/wdg_wkup.h new file mode 100644 index 0000000..03b581c --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/BSPLIB/wdg_wkup.h @@ -0,0 +1,23 @@ +#ifndef WDG_WKUP_H +#define WDG_WKUP_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "stm32f10x.h" + +void PB_IWDG_Init(void); +void PB_IWDG_Feed(void); + +void PB_WWDG_Init(u8 tr, u8 wr, u32 fprer);//Initialize WDG +void PB_WWDG_Set_Counter(u8 cnt); //Set the counter of WDG + +#define WKUP_KD GPIOA->IDR & GPIO_Pin_0 //PA0 check if have WK_UP KEY pressed +void PB_WKUP_Init(void); //PA0 WKUP Initialization + +#ifdef __cplusplus +} +#endif + +#endif // #ifndef WDG_WKUP_H diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/core_cm3.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/core_cm3.c new file mode 100644 index 0000000..fcff0d1 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/core_cm3.c @@ -0,0 +1,784 @@ +/**************************************************************************//** + * @file core_cm3.c + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Source File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#include + +/* define compiler specific symbols */ +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +__ASM uint32_t __get_PSP(void) +{ + mrs r0, psp + bx lr +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +__ASM void __set_PSP(uint32_t topOfProcStack) +{ + msr psp, r0 + bx lr +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +__ASM uint32_t __get_MSP(void) +{ + mrs r0, msp + bx lr +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +__ASM void __set_MSP(uint32_t mainStackPointer) +{ + msr msp, r0 + bx lr +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +__ASM uint32_t __REV16(uint16_t value) +{ + rev16 r0, r0 + bx lr +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +__ASM int32_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +__ASM void __CLREX(void) +{ + clrex +} + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +__ASM uint32_t __get_BASEPRI(void) +{ + mrs r0, basepri + bx lr +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +__ASM void __set_BASEPRI(uint32_t basePri) +{ + msr basepri, r0 + bx lr +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +__ASM uint32_t __get_PRIMASK(void) +{ + mrs r0, primask + bx lr +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +__ASM void __set_PRIMASK(uint32_t priMask) +{ + msr primask, r0 + bx lr +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +__ASM uint32_t __get_FAULTMASK(void) +{ + mrs r0, faultmask + bx lr +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +__ASM void __set_FAULTMASK(uint32_t faultMask) +{ + msr faultmask, r0 + bx lr +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +__ASM uint32_t __get_CONTROL(void) +{ + mrs r0, control + bx lr +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +__ASM void __set_CONTROL(uint32_t control) +{ + msr control, r0 + bx lr +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ +#pragma diag_suppress=Pe940 + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) +{ + __ASM("mrs r0, psp"); + __ASM("bx lr"); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM("msr psp, r0"); + __ASM("bx lr"); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) +{ + __ASM("mrs r0, msp"); + __ASM("bx lr"); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM("msr msp, r0"); + __ASM("bx lr"); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + __ASM("rev16 r0, r0"); + __ASM("bx lr"); +} + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +uint32_t __RBIT(uint32_t value) +{ + __ASM("rbit r0, r0"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit values) + */ +uint8_t __LDREXB(uint8_t *addr) +{ + __ASM("ldrexb r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +uint16_t __LDREXH(uint16_t *addr) +{ + __ASM("ldrexh r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +uint32_t __LDREXW(uint32_t *addr) +{ + __ASM("ldrex r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +uint32_t __STREXB(uint8_t value, uint8_t *addr) +{ + __ASM("strexb r0, r0, [r1]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +uint32_t __STREXH(uint16_t value, uint16_t *addr) +{ + __ASM("strexh r0, r0, [r1]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +uint32_t __STREXW(uint32_t value, uint32_t *addr) +{ + __ASM("strex r0, r0, [r1]"); + __ASM("bx lr"); +} + +#pragma diag_default=Pe940 + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) __attribute__( ( naked ) ); +uint32_t __get_PSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, psp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) ); +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0\n\t" + "BX lr \n\t" : : "r" (topOfProcStack) ); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) __attribute__( ( naked ) ); +uint32_t __get_MSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, msp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) ); +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0\n\t" + "BX lr \n\t" : : "r" (topOfMainStack) ); +} + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +uint32_t __get_BASEPRI(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, basepri_max" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +void __set_BASEPRI(uint32_t value) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (value) ); +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +uint32_t __get_PRIMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) ); +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +uint32_t __get_FAULTMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) ); +} + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +uint32_t __get_CONTROL(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) ); +} + + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +uint32_t __REV(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +int32_t __REVSH(int16_t value) +{ + uint32_t result=0; + + __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +uint32_t __RBIT(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit value + */ +uint8_t __LDREXB(uint8_t *addr) +{ + uint8_t result=0; + + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +uint16_t __LDREXH(uint16_t *addr) +{ + uint16_t result=0; + + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +uint32_t __LDREXW(uint32_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +uint32_t __STREXB(uint8_t value, uint8_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +uint32_t __STREXH(uint16_t value, uint16_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +uint32_t __STREXW(uint32_t value, uint32_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/core_cm3.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/core_cm3.h new file mode 100644 index 0000000..7ab7b4b --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/core_cm3.h @@ -0,0 +1,1818 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#ifndef __CM3_CORE_H__ +#define __CM3_CORE_H__ + +/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration + * + * List of Lint messages which will be suppressed and not shown: + * - Error 10: \n + * register uint32_t __regBasePri __asm("basepri"); \n + * Error 10: Expecting ';' + * . + * - Error 530: \n + * return(__regBasePri); \n + * Warning 530: Symbol '__regBasePri' (line 264) not initialized + * . + * - Error 550: \n + * __regBasePri = (basePri & 0x1ff); \n + * Warning 550: Symbol '__regBasePri' (line 271) not accessed + * . + * - Error 754: \n + * uint32_t RESERVED0[24]; \n + * Info 754: local structure member '' (line 109, file ./cm3_core.h) not referenced + * . + * - Error 750: \n + * #define __CM3_CORE_H__ \n + * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced + * . + * - Error 528: \n + * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n + * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced + * . + * - Error 751: \n + * } InterruptType_Type; \n + * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced + * . + * Note: To re-enable a Message, insert a space before 'lint' * + * + */ + +/*lint -save */ +/*lint -e10 */ +/*lint -e530 */ +/*lint -e550 */ +/*lint -e754 */ +/*lint -e750 */ +/*lint -e528 */ +/*lint -e751 */ + + +/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions + This file defines all structures and symbols for CMSIS core: + - CMSIS version number + - Cortex-M core registers and bitfields + - Cortex-M core peripheral base address + @{ + */ + +#ifdef __cplusplus + extern "C" { +#endif + +#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x03) /*!< Cortex core */ + +#include /* Include standard types */ + +#if defined (__ICCARM__) + #include /* IAR Intrinsics */ +#endif + + +#ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */ +#endif + + + + +/** + * IO definitions + * + * define access restrictions to peripheral registers + */ + +#ifdef __cplusplus + #define __I volatile /*!< defines 'read only' permissions */ +#else + #define __I volatile const /*!< defines 'read only' permissions */ +#endif +#define __O volatile /*!< defines 'write only' permissions */ +#define __IO volatile /*!< defines 'read / write' permissions */ + + + +/******************************************************************************* + * Register Abstraction + ******************************************************************************/ +/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register + @{ +*/ + + +/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC + memory mapped structure for Nested Vectored Interrupt Controller (NVIC) + @{ + */ +typedef struct +{ + __IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */ +} NVIC_Type; +/*@}*/ /* end of group CMSIS_CM3_NVIC */ + + +/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB + memory mapped structure for System Control Block (SCB) + @{ + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (0x1FFul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Registers Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Registers Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ +/*@}*/ /* end of group CMSIS_CM3_SCB */ + + +/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick + memory mapped structure for SysTick + @{ + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ +/*@}*/ /* end of group CMSIS_CM3_SysTick */ + + +/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM + memory mapped structure for Instrumentation Trace Macrocell (ITM) + @{ + */ +typedef struct +{ + __O union + { + __O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */ + } PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */ + __IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */ + __IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ +/*@}*/ /* end of group CMSIS_CM3_ITM */ + + +/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type + memory mapped structure for Interrupt Type + @{ + */ +typedef struct +{ + uint32_t RESERVED0; + __I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */ +#if ((defined __CM3_REV) && (__CM3_REV >= 0x200)) + __IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */ +#else + uint32_t RESERVED1; +#endif +} InterruptType_Type; + +/* Interrupt Controller Type Register Definitions */ +#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */ +#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */ +#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */ + +#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */ +#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */ + +#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */ +#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */ +/*@}*/ /* end of group CMSIS_CM3_InterruptType */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) +/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU + memory mapped structure for Memory Protection Unit (MPU) + @{ + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */ +#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */ + +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */ +#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */ + +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */ +#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */ + +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */ +#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */ + +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */ +#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */ + +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */ +#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@}*/ /* end of group CMSIS_CM3_MPU */ +#endif + + +/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug + memory mapped structure for Core Debug Register + @{ + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +/*@}*/ /* end of group CMSIS_CM3_CoreDebug */ + + +/* Memory mapping of Cortex-M3 Hardware */ +#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000) /*!< ITM Base Address */ +#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */ + +#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */ +#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */ +#endif + +/*@}*/ /* end of group CMSIS_CM3_core_register */ + + +/******************************************************************************* + * Hardware Abstraction Layer + ******************************************************************************/ + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#define __enable_fault_irq __enable_fiq +#define __disable_fault_irq __disable_fiq + +#define __NOP __nop +#define __WFI __wfi +#define __WFE __wfe +#define __SEV __sev +#define __ISB() __isb(0) +#define __DSB() __dsb(0) +#define __DMB() __dmb(0) +#define __REV __rev +#define __RBIT __rbit +#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr)) +#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr)) +#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr)) +#define __STREXB(value, ptr) __strex(value, ptr) +#define __STREXH(value, ptr) __strex(value, ptr) +#define __STREXW(value, ptr) __strex(value, ptr) + + +/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */ +/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */ +/* intrinsic void __enable_irq(); */ +/* intrinsic void __disable_irq(); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +extern void __CLREX(void); + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +extern uint32_t __get_BASEPRI(void); + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +extern void __set_BASEPRI(uint32_t basePri); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +extern uint32_t __get_FAULTMASK(void); + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +extern void __set_FAULTMASK(uint32_t faultMask); + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +#else /* (__ARMCC_VERSION >= 400000) */ + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +#define __CLREX __clrex + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +static __INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +static __INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xff); +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +static __INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +static __INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +static __INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +static __INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & 1); +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +static __INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +static __INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#define __enable_irq __enable_interrupt /*!< global Interrupt enable */ +#define __disable_irq __disable_interrupt /*!< global Interrupt disable */ + +static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); } + +#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */ +static __INLINE void __WFI() { __ASM ("wfi"); } +static __INLINE void __WFE() { __ASM ("wfe"); } +static __INLINE void __SEV() { __ASM ("sev"); } +static __INLINE void __CLREX() { __ASM ("clrex"); } + +/* intrinsic void __ISB(void) */ +/* intrinsic void __DSB(void) */ +/* intrinsic void __DMB(void) */ +/* intrinsic void __set_PRIMASK(); */ +/* intrinsic void __get_PRIMASK(); */ +/* intrinsic void __set_FAULTMASK(); */ +/* intrinsic void __get_FAULTMASK(); */ +/* intrinsic uint32_t __REV(uint32_t value); */ +/* intrinsic uint32_t __REVSH(uint32_t value); */ +/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */ +/* intrinsic unsigned long __LDREX(unsigned long *); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +extern uint32_t __RBIT(uint32_t value); + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit values) + */ +extern uint8_t __LDREXB(uint8_t *addr); + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +extern uint16_t __LDREXH(uint16_t *addr); + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +extern uint32_t __LDREXW(uint32_t *addr); + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +extern uint32_t __STREXB(uint8_t value, uint8_t *addr); + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +extern uint32_t __STREXH(uint16_t value, uint16_t *addr); + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +extern uint32_t __STREXW(uint32_t value, uint32_t *addr); + + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +static __INLINE void __enable_irq() { __ASM volatile ("cpsie i"); } +static __INLINE void __disable_irq() { __ASM volatile ("cpsid i"); } + +static __INLINE void __enable_fault_irq() { __ASM volatile ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM volatile ("cpsid f"); } + +static __INLINE void __NOP() { __ASM volatile ("nop"); } +static __INLINE void __WFI() { __ASM volatile ("wfi"); } +static __INLINE void __WFE() { __ASM volatile ("wfe"); } +static __INLINE void __SEV() { __ASM volatile ("sev"); } +static __INLINE void __ISB() { __ASM volatile ("isb"); } +static __INLINE void __DSB() { __ASM volatile ("dsb"); } +static __INLINE void __DMB() { __ASM volatile ("dmb"); } +static __INLINE void __CLREX() { __ASM volatile ("clrex"); } + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +extern uint32_t __get_BASEPRI(void); + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +extern void __set_BASEPRI(uint32_t basePri); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +extern uint32_t __get_FAULTMASK(void); + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +extern void __set_FAULTMASK(uint32_t faultMask); + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +extern uint32_t __REV(uint32_t value); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +extern uint32_t __RBIT(uint32_t value); + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit value + */ +extern uint8_t __LDREXB(uint8_t *addr); + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +extern uint16_t __LDREXH(uint16_t *addr); + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +extern uint32_t __LDREXW(uint32_t *addr); + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +extern uint32_t __STREXB(uint8_t value, uint8_t *addr); + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +extern uint32_t __STREXH(uint16_t value, uint16_t *addr); + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +extern uint32_t __STREXW(uint32_t value, uint32_t *addr); + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif + + +/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface + Core Function Interface containing: + - Core NVIC Functions + - Core SysTick Functions + - Core Reset Functions +*/ +/*@{*/ + +/* ########################## NVIC functions #################################### */ + +/** + * @brief Set the Priority Grouping in NVIC Interrupt Controller + * + * @param PriorityGroup is priority grouping field + * + * Set the priority grouping field using the required unlock sequence. + * The parameter priority_grouping is assigned to the field + * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + */ +static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + (0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + +/** + * @brief Get the Priority Grouping from NVIC Interrupt Controller + * + * @return priority grouping field + * + * Get the priority grouping from NVIC Interrupt Controller. + * priority grouping is SCB->AIRCR [10:8] PRIGROUP field. + */ +static __INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ +} + +/** + * @brief Enable Interrupt in NVIC Interrupt Controller + * + * @param IRQn The positive number of the external interrupt to enable + * + * Enable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ +} + +/** + * @brief Disable the interrupt line for external interrupt specified + * + * @param IRQn The positive number of the external interrupt to disable + * + * Disable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + +/** + * @brief Read the interrupt pending bit for a device specific interrupt source + * + * @param IRQn The number of the device specifc interrupt + * @return 1 = interrupt pending, 0 = interrupt not pending + * + * Read the pending register in NVIC and return 1 if its status is pending, + * otherwise it returns 0 + */ +static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + +/** + * @brief Set the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for set pending + * + * Set the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + +/** + * @brief Clear the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for clear pending + * + * Clear the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + +/** + * @brief Read the active bit for an external interrupt + * + * @param IRQn The number of the interrupt for read active bit + * @return 1 = interrupt active, 0 = interrupt not active + * + * Read the active register in NVIC and returns 1 if its status is active, + * otherwise it returns 0. + */ +static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ +} + +/** + * @brief Set the priority for an interrupt + * + * @param IRQn The number of the interrupt for set priority + * @param priority The priority to set + * + * Set the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */ + else { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ +} + +/** + * @brief Read the priority for an interrupt + * + * @param IRQn The number of the interrupt for get priority + * @return The priority for the interrupt + * + * Read the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * The returned priority value is automatically aligned to the implemented + * priority bits of the microcontroller. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */ + else { + return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** + * @brief Encode the priority for an interrupt + * + * @param PriorityGroup The used priority group + * @param PreemptPriority The preemptive priority value (starting from 0) + * @param SubPriority The sub priority value (starting from 0) + * @return The encoded priority for the interrupt + * + * Encode the priority for an interrupt with the given priority group, + * preemptive priority value and sub priority value. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + * + * The returned priority value can be used for NVIC_SetPriority(...) function + */ +static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits )) - 1))) + ); +} + + +/** + * @brief Decode the priority of an interrupt + * + * @param Priority The priority for the interrupt + * @param PriorityGroup The used priority group + * @param pPreemptPriority The preemptive priority value (starting from 0) + * @param pSubPriority The sub priority value (starting from 0) + * + * Decode an interrupt priority value with the given priority group to + * preemptive priority value and sub priority value. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + * + * The priority value can be retrieved with NVIC_GetPriority(...) function + */ +static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); +} + + + +/* ################################## SysTick function ############################################ */ + +#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0) + +/** + * @brief Initialize and start the SysTick counter and its interrupt. + * + * @param ticks number of ticks between two interrupts + * @return 1 = failed, 0 = successful + * + * Initialise the system tick timer and its interrupt and start the + * system tick timer / counter in free running mode to generate + * periodical interrupts. + */ +static __INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + + + + +/* ################################## Reset function ############################################ */ + +/** + * @brief Initiate a system reset request. + * + * Initiate a system reset request to reset the MCU + */ +static __INLINE void NVIC_SystemReset(void) +{ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */ + + + +/* ##################################### Debug In/Output function ########################################### */ + +/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface + Core Debug Interface containing: + - Core Debug Receive / Transmit Functions + - Core Debug Defines + - Core Debug Variables +*/ +/*@{*/ + +extern volatile int ITM_RxBuffer; /*!< variable to receive characters */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */ + + +/** + * @brief Outputs a character via the ITM channel 0 + * + * @param ch character to output + * @return character to output + * + * The function outputs a character via the ITM channel 0. + * The function returns when no debugger is connected that has booked the output. + * It is blocking when a debugger is connected, but the previous character send is not transmitted. + */ +static __INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */ + (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0); + ITM->PORT[0].u8 = (uint8_t) ch; + } + return (ch); +} + + +/** + * @brief Inputs a character via variable ITM_RxBuffer + * + * @return received character, -1 = no character received + * + * The function inputs a character via variable ITM_RxBuffer. + * The function returns when no debugger is connected that has booked the output. + * It is blocking when a debugger is connected, but the previous character send is not transmitted. + */ +static __INLINE int ITM_ReceiveChar (void) { + int ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + * @brief Check if a character via variable ITM_RxBuffer is available + * + * @return 1 = character available, 0 = no character available + * + * The function checks variable ITM_RxBuffer whether a character is available or not. + * The function returns '1' if a character is available and '0' if no character is available. + */ +static __INLINE int ITM_CheckChar (void) { + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { + return (0); /* no character available */ + } else { + return (1); /* character available */ + } +} + +/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */ + + +#ifdef __cplusplus +} +#endif + +/*@}*/ /* end of group CMSIS_CM3_core_definitions */ + +#endif /* __CM3_CORE_H__ */ + +/*lint -restore */ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_cl.s b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_cl.s new file mode 100644 index 0000000..833ece4 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_cl.s @@ -0,0 +1,368 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_cl.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x Connectivity line devices vector table for MDK-ARM +;* toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1 and ADC2 + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_IRQHandler ; TIM1 Break + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C1 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC alarm through EXTI line + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_IRQHandler ; TIM6 + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5 + DCD ETH_IRQHandler ; Ethernet + DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line + DCD CAN2_TX_IRQHandler ; CAN2 TX + DCD CAN2_RX0_IRQHandler ; CAN2 RX0 + DCD CAN2_RX1_IRQHandler ; CAN2 RX1 + DCD CAN2_SCE_IRQHandler ; CAN2 SCE + DCD OTG_FS_IRQHandler ; USB OTG FS +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT CAN1_TX_IRQHandler [WEAK] + EXPORT CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT OTG_FS_WKUP_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT ETH_IRQHandler [WEAK] + EXPORT ETH_WKUP_IRQHandler [WEAK] + EXPORT CAN2_TX_IRQHandler [WEAK] + EXPORT CAN2_RX0_IRQHandler [WEAK] + EXPORT CAN2_RX1_IRQHandler [WEAK] + EXPORT CAN2_SCE_IRQHandler [WEAK] + EXPORT OTG_FS_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +CAN1_TX_IRQHandler +CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +OTG_FS_WKUP_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +ETH_IRQHandler +ETH_WKUP_IRQHandler +CAN2_TX_IRQHandler +CAN2_RX0_IRQHandler +CAN2_RX1_IRQHandler +CAN2_SCE_IRQHandler +OTG_FS_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_hd.s b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_hd.s new file mode 100644 index 0000000..8a19827 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_hd.s @@ -0,0 +1,358 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_hd.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x High Density Devices vector table for MDK-ARM +;* toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system and also configure the external +;* SRAM mounted on STM3210E-EVAL board to be used as data +;* memory (optional, to be enabled by user) +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1 & ADC2 + DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX + DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_IRQHandler ; TIM1 Break + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend + DCD TIM8_BRK_IRQHandler ; TIM8 Break + DCD TIM8_UP_IRQHandler ; TIM8 Update + DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD ADC3_IRQHandler ; ADC3 + DCD FSMC_IRQHandler ; FSMC + DCD SDIO_IRQHandler ; SDIO + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_IRQHandler ; TIM6 + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 + DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + EXPORT TIM8_BRK_IRQHandler [WEAK] + EXPORT TIM8_UP_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT ADC3_IRQHandler [WEAK] + EXPORT FSMC_IRQHandler [WEAK] + EXPORT SDIO_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_5_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN1_TX_IRQHandler +USB_LP_CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +USBWakeUp_IRQHandler +TIM8_BRK_IRQHandler +TIM8_UP_IRQHandler +TIM8_TRG_COM_IRQHandler +TIM8_CC_IRQHandler +ADC3_IRQHandler +FSMC_IRQHandler +SDIO_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_5_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_hd_vl.s b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_hd_vl.s new file mode 100644 index 0000000..2768298 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_hd_vl.s @@ -0,0 +1,346 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_hd_vl.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x High Density Value Line Devices vector table +;* for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system and also configure the external +;* SRAM mounted on STM32100E-EVAL board to be used as data +;* memory (optional, to be enabled by user) +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD CEC_IRQHandler ; HDMI-CEC + DCD TIM12_IRQHandler ; TIM12 + DCD TIM13_IRQHandler ; TIM13 + DCD TIM14_IRQHandler ; TIM14 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 + DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT TIM12_IRQHandler [WEAK] + EXPORT TIM13_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_5_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +CEC_IRQHandler +TIM12_IRQHandler +TIM13_IRQHandler +TIM14_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_5_IRQHandler +DMA2_Channel5_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_ld.s b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_ld.s new file mode 100644 index 0000000..f18be4b --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_ld.s @@ -0,0 +1,297 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_ld.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x Low Density Devices vector table for MDK-ARM +;* toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1_2 + DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX + DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_IRQHandler ; TIM1 Break + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD 0 ; Reserved + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN1_TX_IRQHandler +USB_LP_CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI1_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +USBWakeUp_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_ld_vl.s b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_ld_vl.s new file mode 100644 index 0000000..f7240dc --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_ld_vl.s @@ -0,0 +1,304 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_ld_vl.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x Low Density Value Line Devices vector table +;* for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD 0 ; Reserved + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD CEC_IRQHandler ; HDMI-CEC + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun + DCD TIM7_IRQHandler ; TIM7 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI1_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +CEC_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_md.s b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_md.s new file mode 100644 index 0000000..74da96c --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_md.s @@ -0,0 +1,307 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_md.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x Medium Density Devices vector table for MDK-ARM +;* toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1_2 + DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX + DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_IRQHandler ; TIM1 Break + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN1_TX_IRQHandler +USB_LP_CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +USBWakeUp_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_md_vl.s b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_md_vl.s new file mode 100644 index 0000000..076aa7f --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_md_vl.s @@ -0,0 +1,315 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_md_vl.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x Medium Density Value Line Devices vector table +;* for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD CEC_IRQHandler ; HDMI-CEC + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun + DCD TIM7_IRQHandler ; TIM7 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +CEC_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_xl.s b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_xl.s new file mode 100644 index 0000000..9fbc640 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/startup/startup_stm32f10x_xl.s @@ -0,0 +1,358 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_xl.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x XL-Density Devices vector table for MDK-ARM +;* toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system and also configure the external +;* SRAM mounted on STM3210E-EVAL board to be used as data +;* memory (optional, to be enabled by user) +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1 & ADC2 + DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX + DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend + DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 + DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 + DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD ADC3_IRQHandler ; ADC3 + DCD FSMC_IRQHandler ; FSMC + DCD SDIO_IRQHandler ; SDIO + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_IRQHandler ; TIM6 + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 + DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM10_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK] + EXPORT TIM8_UP_TIM13_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT ADC3_IRQHandler [WEAK] + EXPORT FSMC_IRQHandler [WEAK] + EXPORT SDIO_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_5_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN1_TX_IRQHandler +USB_LP_CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM9_IRQHandler +TIM1_UP_TIM10_IRQHandler +TIM1_TRG_COM_TIM11_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +USBWakeUp_IRQHandler +TIM8_BRK_TIM12_IRQHandler +TIM8_UP_TIM13_IRQHandler +TIM8_TRG_COM_TIM14_IRQHandler +TIM8_CC_IRQHandler +ADC3_IRQHandler +FSMC_IRQHandler +SDIO_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_5_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/stm32f10x.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/stm32f10x.h new file mode 100644 index 0000000..8bf7624 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/stm32f10x.h @@ -0,0 +1,8336 @@ +/** + ****************************************************************************** + * @file stm32f10x.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F10x Connectivity line, + * High density, High density value line, Medium density, + * Medium density Value line, Low density, Low density Value line + * and XL-density devices. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The device used in the target application + * - To use or not the peripherals drivers in application code(i.e. + * code will be based on direct access to peripherals registers + * rather than drivers API), this option is controlled by + * "#define USE_STDPERIPH_DRIVER" + * - To change few application-specific parameters such as the HSE + * crystal frequency + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripherals registers hardware + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x + * @{ + */ + +#ifndef __STM32F10x_H +#define __STM32F10x_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Library_configuration_section + * @{ + */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) + /* #define STM32F10X_LD */ /*!< STM32F10X_LD: STM32 Low density devices */ + /* #define STM32F10X_LD_VL */ /*!< STM32F10X_LD_VL: STM32 Low density Value Line devices */ + /* #define STM32F10X_MD */ /*!< STM32F10X_MD: STM32 Medium density devices */ + /* #define STM32F10X_MD_VL */ /*!< STM32F10X_MD_VL: STM32 Medium density Value Line devices */ + /* #define STM32F10X_HD */ /*!< STM32F10X_HD: STM32 High density devices */ + /* #define STM32F10X_HD_VL */ /*!< STM32F10X_HD_VL: STM32 High density value line devices */ + /* #define STM32F10X_XL */ /*!< STM32F10X_XL: STM32 XL-density devices */ + /* #define STM32F10X_CL */ /*!< STM32F10X_CL: STM32 Connectivity line devices */ +#endif +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers + where the Flash memory density ranges between 16 and 32 Kbytes. + - Low-density value line devices are STM32F100xx microcontrollers where the Flash + memory density ranges between 16 and 32 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers + where the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 64 and 128 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) + #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)" +#endif + +#if !defined USE_STDPERIPH_DRIVER +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_STDPERIPH_DRIVER*/ +#endif + +/** + * @brief In the following line adjust the value of External High Speed oscillator (HSE) + used in your application + + Tip: To avoid modifying this file each time you need to use different HSE, you + can define the HSE value in your toolchain compiler preprocessor. + */ +#if !defined HSE_VALUE + #ifdef STM32F10X_CL + #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ + #else + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ + #endif /* STM32F10X_CL */ +#endif /* HSE_VALUE */ + + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + Timeout value + */ +#define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */ + +#define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ + +/** + * @brief STM32F10x Standard Peripheral Library version number + */ +#define __STM32F10X_STDPERIPH_VERSION_MAIN (0x03) /*!< [31:24] main version */ +#define __STM32F10X_STDPERIPH_VERSION_SUB1 (0x05) /*!< [23:16] sub1 version */ +#define __STM32F10X_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32F10X_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F10X_STDPERIPH_VERSION ( (__STM32F10X_STDPERIPH_VERSION_MAIN << 24)\ + |(__STM32F10X_STDPERIPH_VERSION_SUB1 << 16)\ + |(__STM32F10X_STDPERIPH_VERSION_SUB2 << 8)\ + |(__STM32F10X_STDPERIPH_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#ifdef STM32F10X_XL + #define __MPU_PRESENT 1 /*!< STM32 XL-density devices provide an MPU */ +#else + #define __MPU_PRESENT 0 /*!< Other STM32 devices does not provide an MPU */ +#endif /* STM32F10X_XL */ +#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum IRQn +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + +#ifdef STM32F10X_LD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +#endif /* STM32F10X_LD */ + +#ifdef STM32F10X_LD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55 /*!< TIM7 Interrupt */ +#endif /* STM32F10X_LD_VL */ + +#ifdef STM32F10X_MD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +#endif /* STM32F10X_MD */ + +#ifdef STM32F10X_MD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55 /*!< TIM7 Interrupt */ +#endif /* STM32F10X_MD_VL */ + +#ifdef STM32F10X_HD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ + TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */ + TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +#endif /* STM32F10X_HD */ + +#ifdef STM32F10X_HD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM12_IRQn = 43, /*!< TIM12 global Interrupt */ + TIM13_IRQn = 44, /*!< TIM13 global Interrupt */ + TIM14_IRQn = 45, /*!< TIM14 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ + DMA2_Channel5_IRQn = 60 /*!< DMA2 Channel 5 global Interrupt (DMA2 Channel 5 is + mapped at position 60 only if the MISC_REMAP bit in + the AFIO_MAPR2 register is set) */ +#endif /* STM32F10X_HD_VL */ + +#ifdef STM32F10X_XL + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break Interrupt and TIM9 global Interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global Interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global Interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global Interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +#endif /* STM32F10X_XL */ + +#ifdef STM32F10X_CL + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ + DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */ +#endif /* STM32F10X_CL */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f10x.h" +#include + +/** @addtogroup Exported_types + * @{ + */ + +/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */ +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; + +typedef const int32_t sc32; /*!< Read Only */ +typedef const int16_t sc16; /*!< Read Only */ +typedef const int8_t sc8; /*!< Read Only */ + +typedef __IO int32_t vs32; +typedef __IO int16_t vs16; +typedef __IO int8_t vs8; + +typedef __I int32_t vsc32; /*!< Read Only */ +typedef __I int16_t vsc16; /*!< Read Only */ +typedef __I int8_t vsc8; /*!< Read Only */ + +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; + +typedef const uint32_t uc32; /*!< Read Only */ +typedef const uint16_t uc16; /*!< Read Only */ +typedef const uint8_t uc8; /*!< Read Only */ + +typedef __IO uint32_t vu32; +typedef __IO uint16_t vu16; +typedef __IO uint8_t vu8; + +typedef __I uint32_t vuc32; /*!< Read Only */ +typedef __I uint16_t vuc16; /*!< Read Only */ +typedef __I uint8_t vuc8; /*!< Read Only */ + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; + +/*!< STM32F10x Standard Peripheral Library old definitions (maintained for legacy purpose) */ +#define HSEStartUp_TimeOut HSE_STARTUP_TIMEOUT +#define HSE_Value HSE_VALUE +#define HSI_Value HSI_VALUE +/** + * @} + */ + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint16_t DR1; + uint16_t RESERVED1; + __IO uint16_t DR2; + uint16_t RESERVED2; + __IO uint16_t DR3; + uint16_t RESERVED3; + __IO uint16_t DR4; + uint16_t RESERVED4; + __IO uint16_t DR5; + uint16_t RESERVED5; + __IO uint16_t DR6; + uint16_t RESERVED6; + __IO uint16_t DR7; + uint16_t RESERVED7; + __IO uint16_t DR8; + uint16_t RESERVED8; + __IO uint16_t DR9; + uint16_t RESERVED9; + __IO uint16_t DR10; + uint16_t RESERVED10; + __IO uint16_t RTCCR; + uint16_t RESERVED11; + __IO uint16_t CR; + uint16_t RESERVED12; + __IO uint16_t CSR; + uint16_t RESERVED13[5]; + __IO uint16_t DR11; + uint16_t RESERVED14; + __IO uint16_t DR12; + uint16_t RESERVED15; + __IO uint16_t DR13; + uint16_t RESERVED16; + __IO uint16_t DR14; + uint16_t RESERVED17; + __IO uint16_t DR15; + uint16_t RESERVED18; + __IO uint16_t DR16; + uint16_t RESERVED19; + __IO uint16_t DR17; + uint16_t RESERVED20; + __IO uint16_t DR18; + uint16_t RESERVED21; + __IO uint16_t DR19; + uint16_t RESERVED22; + __IO uint16_t DR20; + uint16_t RESERVED23; + __IO uint16_t DR21; + uint16_t RESERVED24; + __IO uint16_t DR22; + uint16_t RESERVED25; + __IO uint16_t DR23; + uint16_t RESERVED26; + __IO uint16_t DR24; + uint16_t RESERVED27; + __IO uint16_t DR25; + uint16_t RESERVED28; + __IO uint16_t DR26; + uint16_t RESERVED29; + __IO uint16_t DR27; + uint16_t RESERVED30; + __IO uint16_t DR28; + uint16_t RESERVED31; + __IO uint16_t DR29; + uint16_t RESERVED32; + __IO uint16_t DR30; + uint16_t RESERVED33; + __IO uint16_t DR31; + uint16_t RESERVED34; + __IO uint16_t DR32; + uint16_t RESERVED35; + __IO uint16_t DR33; + uint16_t RESERVED36; + __IO uint16_t DR34; + uint16_t RESERVED37; + __IO uint16_t DR35; + uint16_t RESERVED38; + __IO uint16_t DR36; + uint16_t RESERVED39; + __IO uint16_t DR37; + uint16_t RESERVED40; + __IO uint16_t DR38; + uint16_t RESERVED41; + __IO uint16_t DR39; + uint16_t RESERVED42; + __IO uint16_t DR40; + uint16_t RESERVED43; + __IO uint16_t DR41; + uint16_t RESERVED44; + __IO uint16_t DR42; + uint16_t RESERVED45; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; +#ifndef STM32F10X_CL + CAN_FilterRegister_TypeDef sFilterRegister[14]; +#else + CAN_FilterRegister_TypeDef sFilterRegister[28]; +#endif /* STM32F10X_CL */ +} CAN_TypeDef; + +/** + * @brief Consumer Electronics Control (CEC) + */ +typedef struct +{ + __IO uint32_t CFGR; + __IO uint32_t OAR; + __IO uint32_t PRES; + __IO uint32_t ESR; + __IO uint32_t CSR; + __IO uint32_t TXD; + __IO uint32_t RXD; +} CEC_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; + __IO uint8_t IDR; + uint8_t RESERVED0; + uint16_t RESERVED1; + __IO uint32_t CR; +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + __IO uint32_t SR; +#endif +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1[2]; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + uint32_t RESERVED8[567]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + uint32_t RESERVED9[9]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +#ifdef STM32F10X_XL + uint32_t RESERVED1[8]; + __IO uint32_t KEYR2; + uint32_t RESERVED2; + __IO uint32_t SR2; + __IO uint32_t CR2; + __IO uint32_t AR2; +#endif /* STM32F10X_XL */ +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; +} FSMC_Bank1E_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; + __IO uint32_t SR2; + __IO uint32_t PMEM2; + __IO uint32_t PATT2; + uint32_t RESERVED0; + __IO uint32_t ECCR2; +} FSMC_Bank2_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR3; + __IO uint32_t SR3; + __IO uint32_t PMEM3; + __IO uint32_t PATT3; + uint32_t RESERVED0; + __IO uint32_t ECCR3; +} FSMC_Bank3_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; + __IO uint32_t SR4; + __IO uint32_t PMEM4; + __IO uint32_t PATT4; + __IO uint32_t PIO4; +} FSMC_Bank4_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t OAR1; + uint16_t RESERVED2; + __IO uint16_t OAR2; + uint16_t RESERVED3; + __IO uint16_t DR; + uint16_t RESERVED4; + __IO uint16_t SR1; + uint16_t RESERVED5; + __IO uint16_t SR2; + uint16_t RESERVED6; + __IO uint16_t CCR; + uint16_t RESERVED7; + __IO uint16_t TRISE; + uint16_t RESERVED8; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; + __IO uint32_t PR; + __IO uint32_t RLR; + __IO uint32_t SR; +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + +#ifdef STM32F10X_CL + __IO uint32_t AHBRSTR; + __IO uint32_t CFGR2; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + uint32_t RESERVED0; + __IO uint32_t CFGR2; +#endif /* STM32F10X_LD_VL || STM32F10X_MD_VL || STM32F10X_HD_VL */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint16_t CRH; + uint16_t RESERVED0; + __IO uint16_t CRL; + uint16_t RESERVED1; + __IO uint16_t PRLH; + uint16_t RESERVED2; + __IO uint16_t PRLL; + uint16_t RESERVED3; + __IO uint16_t DIVH; + uint16_t RESERVED4; + __IO uint16_t DIVL; + uint16_t RESERVED5; + __IO uint16_t CNTH; + uint16_t RESERVED6; + __IO uint16_t CNTL; + uint16_t RESERVED7; + __IO uint16_t ALRH; + uint16_t RESERVED8; + __IO uint16_t ALRL; + uint16_t RESERVED9; +} RTC_TypeDef; + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; + __IO uint32_t CLKCR; + __IO uint32_t ARG; + __IO uint32_t CMD; + __I uint32_t RESPCMD; + __I uint32_t RESP1; + __I uint32_t RESP2; + __I uint32_t RESP3; + __I uint32_t RESP4; + __IO uint32_t DTIMER; + __IO uint32_t DLEN; + __IO uint32_t DCTRL; + __I uint32_t DCOUNT; + __I uint32_t STA; + __IO uint32_t ICR; + __IO uint32_t MASK; + uint32_t RESERVED0[2]; + __I uint32_t FIFOCNT; + uint32_t RESERVED1[13]; + __IO uint32_t FIFO; +} SDIO_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t SR; + uint16_t RESERVED2; + __IO uint16_t DR; + uint16_t RESERVED3; + __IO uint16_t CRCPR; + uint16_t RESERVED4; + __IO uint16_t RXCRCR; + uint16_t RESERVED5; + __IO uint16_t TXCRCR; + uint16_t RESERVED6; + __IO uint16_t I2SCFGR; + uint16_t RESERVED7; + __IO uint16_t I2SPR; + uint16_t RESERVED8; +} SPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t SMCR; + uint16_t RESERVED2; + __IO uint16_t DIER; + uint16_t RESERVED3; + __IO uint16_t SR; + uint16_t RESERVED4; + __IO uint16_t EGR; + uint16_t RESERVED5; + __IO uint16_t CCMR1; + uint16_t RESERVED6; + __IO uint16_t CCMR2; + uint16_t RESERVED7; + __IO uint16_t CCER; + uint16_t RESERVED8; + __IO uint16_t CNT; + uint16_t RESERVED9; + __IO uint16_t PSC; + uint16_t RESERVED10; + __IO uint16_t ARR; + uint16_t RESERVED11; + __IO uint16_t RCR; + uint16_t RESERVED12; + __IO uint16_t CCR1; + uint16_t RESERVED13; + __IO uint16_t CCR2; + uint16_t RESERVED14; + __IO uint16_t CCR3; + uint16_t RESERVED15; + __IO uint16_t CCR4; + uint16_t RESERVED16; + __IO uint16_t BDTR; + uint16_t RESERVED17; + __IO uint16_t DCR; + uint16_t RESERVED18; + __IO uint16_t DMAR; + uint16_t RESERVED19; +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint16_t SR; + uint16_t RESERVED0; + __IO uint16_t DR; + uint16_t RESERVED1; + __IO uint16_t BRR; + uint16_t RESERVED2; + __IO uint16_t CR1; + uint16_t RESERVED3; + __IO uint16_t CR2; + uint16_t RESERVED4; + __IO uint16_t CR3; + uint16_t RESERVED5; + __IO uint16_t GTPR; + uint16_t RESERVED6; +} USART_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFR; + __IO uint32_t SR; +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */ +#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */ +#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ + +#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) +#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) +#define CEC_BASE (APB1PERIPH_BASE + 0x7800) + +#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) +#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) +#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00) +#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) +#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define TIM8_BASE (APB2PERIPH_BASE + 0x3400) +#define USART1_BASE (APB2PERIPH_BASE + 0x3800) +#define ADC3_BASE (APB2PERIPH_BASE + 0x3C00) +#define TIM15_BASE (APB2PERIPH_BASE + 0x4000) +#define TIM16_BASE (APB2PERIPH_BASE + 0x4400) +#define TIM17_BASE (APB2PERIPH_BASE + 0x4800) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4C00) +#define TIM10_BASE (APB2PERIPH_BASE + 0x5000) +#define TIM11_BASE (APB2PERIPH_BASE + 0x5400) + +#define SDIO_BASE (PERIPH_BASE + 0x18000) + +#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) +#define DMA2_BASE (AHBPERIPH_BASE + 0x0400) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x0408) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x041C) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x0430) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x0444) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x0458) +#define RCC_BASE (AHBPERIPH_BASE + 0x1000) +#define CRC_BASE (AHBPERIPH_BASE + 0x3000) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */ +#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */ + +#define ETH_BASE (AHBPERIPH_BASE + 0x8000) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x0100) +#define ETH_PTP_BASE (ETH_BASE + 0x0700) +#define ETH_DMA_BASE (ETH_BASE + 0x1000) + +#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */ +#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */ +#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) /*!< FSMC Bank2 registers base address */ +#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) /*!< FSMC Bank3 registers base address */ +#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) /*!< FSMC Bank4 registers base address */ + +#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#define BKP ((BKP_TypeDef *) BKP_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define AFIO ((AFIO_TypeDef *) AFIO_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM10 ((TIM_TypeDef *) TIM10_BASE) +#define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define SDIO ((SDIO_TypeDef *) SDIO_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define OB ((OB_TypeDef *) OB_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) +#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) +#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) +#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */ + + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */ + + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET ((uint8_t)0x01) /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS ((uint16_t)0x0001) /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */ +#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */ +#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */ +#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_2V2 ((uint16_t)0x0000) /*!< PVD level 2.2V */ +#define PWR_CR_PLS_2V3 ((uint16_t)0x0020) /*!< PVD level 2.3V */ +#define PWR_CR_PLS_2V4 ((uint16_t)0x0040) /*!< PVD level 2.4V */ +#define PWR_CR_PLS_2V5 ((uint16_t)0x0060) /*!< PVD level 2.5V */ +#define PWR_CR_PLS_2V6 ((uint16_t)0x0080) /*!< PVD level 2.6V */ +#define PWR_CR_PLS_2V7 ((uint16_t)0x00A0) /*!< PVD level 2.7V */ +#define PWR_CR_PLS_2V8 ((uint16_t)0x00C0) /*!< PVD level 2.8V */ +#define PWR_CR_PLS_2V9 ((uint16_t)0x00E0) /*!< PVD level 2.9V */ + +#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */ +#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */ +#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */ +#define PWR_CSR_EWUP ((uint16_t)0x0100) /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL ((uint16_t)0x007F) /*!< Calibration value */ +#define BKP_RTCCR_CCO ((uint16_t)0x0080) /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE ((uint16_t)0x0100) /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS ((uint16_t)0x0200) /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE ((uint8_t)0x01) /*!< TAMPER pin enable */ +#define BKP_CR_TPAL ((uint8_t)0x02) /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE ((uint16_t)0x0001) /*!< Clear Tamper event */ +#define BKP_CSR_CTI ((uint16_t)0x0002) /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE ((uint16_t)0x0004) /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF ((uint16_t)0x0100) /*!< Tamper Event Flag */ +#define BKP_CSR_TIF ((uint16_t)0x0200) /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */ +#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */ +#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */ + +#ifdef STM32F10X_CL + #define RCC_CR_PLL2ON ((uint32_t)0x04000000) /*!< PLL2 enable */ + #define RCC_CR_PLL2RDY ((uint32_t)0x08000000) /*!< PLL2 clock ready flag */ + #define RCC_CR_PLL3ON ((uint32_t)0x10000000) /*!< PLL3 enable */ + #define RCC_CR_PLL3RDY ((uint32_t)0x20000000) /*!< PLL3 clock ready flag */ +#endif /* STM32F10X_CL */ + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */ +#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */ +#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */ + +#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE ((uint32_t)0x0000C000) /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define RCC_CFGR_ADCPRE_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 ((uint32_t)0x00008000) /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 ((uint32_t)0x0000C000) /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define RCC_CFGR_PLLMULL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define RCC_CFGR_PLLMULL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ +#define RCC_CFGR_PLLMULL_3 ((uint32_t)0x00200000) /*!< Bit 3 */ + +#ifdef STM32F10X_CL + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock * 4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock * 5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock * 6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock * 7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock * 8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock * 9 */ + #define RCC_CFGR_PLLMULL6_5 ((uint32_t)0x00340000) /*!< PLL input clock * 6.5 */ + + #define RCC_CFGR_OTGFSPRE ((uint32_t)0x00400000) /*!< USB OTG FS prescaler */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + #define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLLCLK_Div2 ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ + #define RCC_CFGR_MCO_PLL2CLK ((uint32_t)0x08000000) /*!< PLL2 clock selected as MCO source*/ + #define RCC_CFGR_MCO_PLL3CLK_Div2 ((uint32_t)0x09000000) /*!< PLL3 clock divided by 2 selected as MCO source*/ + #define RCC_CFGR_MCO_Ext_HSE ((uint32_t)0x0A000000) /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL3CLK ((uint32_t)0x0B000000) /*!< PLL3 clock selected as MCO source */ +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ + #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ + #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ + #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ + #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ + #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ + #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ + #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ + #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ +#else + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_HSE ((uint32_t)0x00000000) /*!< HSE clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_HSE_Div2 ((uint32_t)0x00020000) /*!< HSE clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ + #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ + #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ + #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ + #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ + #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ + #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ + #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ + #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ + #define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB Device prescaler */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ +#endif /* STM32F10X_CL */ + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */ + +#ifdef STM32F10X_CL + #define RCC_CIR_PLL2RDYF ((uint32_t)0x00000020) /*!< PLL2 Ready Interrupt flag */ + #define RCC_CIR_PLL3RDYF ((uint32_t)0x00000040) /*!< PLL3 Ready Interrupt flag */ + #define RCC_CIR_PLL2RDYIE ((uint32_t)0x00002000) /*!< PLL2 Ready Interrupt Enable */ + #define RCC_CIR_PLL3RDYIE ((uint32_t)0x00004000) /*!< PLL3 Ready Interrupt Enable */ + #define RCC_CIR_PLL2RDYC ((uint32_t)0x00200000) /*!< PLL2 Ready Interrupt Clear */ + #define RCC_CIR_PLL3RDYC ((uint32_t)0x00400000) /*!< PLL3 Ready Interrupt Clear */ +#endif /* STM32F10X_CL */ + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST ((uint32_t)0x00000001) /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST ((uint32_t)0x00000004) /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST ((uint32_t)0x00000008) /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST ((uint32_t)0x00000010) /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST ((uint32_t)0x00000020) /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST ((uint32_t)0x00000200) /*!< ADC 1 interface reset */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB2RSTR_ADC2RST ((uint32_t)0x00000400) /*!< ADC 2 interface reset */ +#endif + +#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 Timer reset */ +#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 Timer reset */ +#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 Timer reset */ +#endif + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB2RSTR_IOPERST ((uint32_t)0x00000040) /*!< I/O port E reset */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */ + #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */ + #define RCC_APB2RSTR_TIM8RST ((uint32_t)0x00002000) /*!< TIM8 Timer reset */ + #define RCC_APB2RSTR_ADC3RST ((uint32_t)0x00008000) /*!< ADC3 interface reset */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */ + #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */ +#endif + +#ifdef STM32F10X_XL + #define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00080000) /*!< TIM9 Timer reset */ + #define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00100000) /*!< TIM10 Timer reset */ + #define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00200000) /*!< TIM11 Timer reset */ +#endif /* STM32F10X_XL */ + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000) /*!< CAN1 reset */ +#endif + +#define RCC_APB1RSTR_BKPRST ((uint32_t)0x08000000) /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */ + #define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */ + #define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */ + #define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) || defined (STM32F10X_XL) + #define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB Device reset */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_XL) + #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ + #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ + #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ + #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ + #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ + #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ + #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ +#endif + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ + #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ + #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ + #define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC interface reset */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ + #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */ + #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */ + #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */ + #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ + #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ + #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ +#endif + +#ifdef STM32F10X_CL + #define RCC_APB1RSTR_CAN2RST ((uint32_t)0x04000000) /*!< CAN2 reset */ +#endif /* STM32F10X_CL */ + +#ifdef STM32F10X_XL + #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */ + #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */ + #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */ +#endif /* STM32F10X_XL */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN ((uint16_t)0x0001) /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN ((uint16_t)0x0004) /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN ((uint16_t)0x0010) /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN ((uint16_t)0x0040) /*!< CRC clock enable */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_HD_VL) + #define RCC_AHBENR_DMA2EN ((uint16_t)0x0002) /*!< DMA2 clock enable */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ + #define RCC_AHBENR_SDIOEN ((uint16_t)0x0400) /*!< SDIO clock enable */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ +#endif + +#ifdef STM32F10X_CL + #define RCC_AHBENR_OTGFSEN ((uint32_t)0x00001000) /*!< USB OTG FS clock enable */ + #define RCC_AHBENR_ETHMACEN ((uint32_t)0x00004000) /*!< ETHERNET MAC clock enable */ + #define RCC_AHBENR_ETHMACTXEN ((uint32_t)0x00008000) /*!< ETHERNET MAC Tx clock enable */ + #define RCC_AHBENR_ETHMACRXEN ((uint32_t)0x00010000) /*!< ETHERNET MAC Rx clock enable */ +#endif /* STM32F10X_CL */ + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN ((uint32_t)0x00000001) /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN ((uint32_t)0x00000004) /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN ((uint32_t)0x00000008) /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN ((uint32_t)0x00000010) /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN ((uint32_t)0x00000020) /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000200) /*!< ADC 1 interface clock enable */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB2ENR_ADC2EN ((uint32_t)0x00000400) /*!< ADC 2 interface clock enable */ +#endif + +#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 Timer clock enable */ +#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 Timer clock enable */ +#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 Timer clock enable */ +#endif + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB2ENR_IOPEEN ((uint32_t)0x00000040) /*!< I/O port E clock enable */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */ + #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */ + #define RCC_APB2ENR_TIM8EN ((uint32_t)0x00002000) /*!< TIM8 Timer clock enable */ + #define RCC_APB2ENR_ADC3EN ((uint32_t)0x00008000) /*!< DMA1 clock enable */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */ + #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */ +#endif + +#ifdef STM32F10X_XL + #define RCC_APB2ENR_TIM9EN ((uint32_t)0x00080000) /*!< TIM9 Timer clock enable */ + #define RCC_APB2ENR_TIM10EN ((uint32_t)0x00100000) /*!< TIM10 Timer clock enable */ + #define RCC_APB2ENR_TIM11EN ((uint32_t)0x00200000) /*!< TIM11 Timer clock enable */ +#endif + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000) /*!< CAN1 clock enable */ +#endif + +#define RCC_APB1ENR_BKPEN ((uint32_t)0x08000000) /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */ + #define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */ + #define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */ + #define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) + #define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB Device clock enable */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) + #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ + #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ + #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ + #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ + #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ + #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ + #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ +#endif + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ + #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ + #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ + #define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC interface clock enable */ +#endif + +#ifdef STM32F10X_HD_VL + #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ + #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */ + #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */ + #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */ + #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ + #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ + #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ +#endif /* STM32F10X_HD_VL */ + +#ifdef STM32F10X_CL + #define RCC_APB1ENR_CAN2EN ((uint32_t)0x04000000) /*!< CAN2 clock enable */ +#endif /* STM32F10X_CL */ + +#ifdef STM32F10X_XL + #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */ + #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */ + #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */ +#endif /* STM32F10X_XL */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */ +#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */ + +#ifdef STM32F10X_CL +/******************* Bit definition for RCC_AHBRSTR register ****************/ + #define RCC_AHBRSTR_OTGFSRST ((uint32_t)0x00001000) /*!< USB OTG FS reset */ + #define RCC_AHBRSTR_ETHMACRST ((uint32_t)0x00004000) /*!< ETHERNET MAC reset */ + +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ + #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ + #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ + #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ + +/*!< PREDIV2 configuration */ + #define RCC_CFGR2_PREDIV2 ((uint32_t)0x000000F0) /*!< PREDIV2[3:0] bits */ + #define RCC_CFGR2_PREDIV2_0 ((uint32_t)0x00000010) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV2_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV2_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV2_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV2_DIV1 ((uint32_t)0x00000000) /*!< PREDIV2 input clock not divided */ + #define RCC_CFGR2_PREDIV2_DIV2 ((uint32_t)0x00000010) /*!< PREDIV2 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV2_DIV3 ((uint32_t)0x00000020) /*!< PREDIV2 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV2_DIV4 ((uint32_t)0x00000030) /*!< PREDIV2 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV2_DIV5 ((uint32_t)0x00000040) /*!< PREDIV2 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV2_DIV6 ((uint32_t)0x00000050) /*!< PREDIV2 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV2_DIV7 ((uint32_t)0x00000060) /*!< PREDIV2 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV2_DIV8 ((uint32_t)0x00000070) /*!< PREDIV2 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV2_DIV9 ((uint32_t)0x00000080) /*!< PREDIV2 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV2_DIV10 ((uint32_t)0x00000090) /*!< PREDIV2 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV2_DIV11 ((uint32_t)0x000000A0) /*!< PREDIV2 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV2_DIV12 ((uint32_t)0x000000B0) /*!< PREDIV2 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV2_DIV13 ((uint32_t)0x000000C0) /*!< PREDIV2 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV2_DIV14 ((uint32_t)0x000000D0) /*!< PREDIV2 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV2_DIV15 ((uint32_t)0x000000E0) /*!< PREDIV2 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV2_DIV16 ((uint32_t)0x000000F0) /*!< PREDIV2 input clock divided by 16 */ + +/*!< PLL2MUL configuration */ + #define RCC_CFGR2_PLL2MUL ((uint32_t)0x00000F00) /*!< PLL2MUL[3:0] bits */ + #define RCC_CFGR2_PLL2MUL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ + #define RCC_CFGR2_PLL2MUL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + #define RCC_CFGR2_PLL2MUL_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + #define RCC_CFGR2_PLL2MUL_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + + #define RCC_CFGR2_PLL2MUL8 ((uint32_t)0x00000600) /*!< PLL2 input clock * 8 */ + #define RCC_CFGR2_PLL2MUL9 ((uint32_t)0x00000700) /*!< PLL2 input clock * 9 */ + #define RCC_CFGR2_PLL2MUL10 ((uint32_t)0x00000800) /*!< PLL2 input clock * 10 */ + #define RCC_CFGR2_PLL2MUL11 ((uint32_t)0x00000900) /*!< PLL2 input clock * 11 */ + #define RCC_CFGR2_PLL2MUL12 ((uint32_t)0x00000A00) /*!< PLL2 input clock * 12 */ + #define RCC_CFGR2_PLL2MUL13 ((uint32_t)0x00000B00) /*!< PLL2 input clock * 13 */ + #define RCC_CFGR2_PLL2MUL14 ((uint32_t)0x00000C00) /*!< PLL2 input clock * 14 */ + #define RCC_CFGR2_PLL2MUL16 ((uint32_t)0x00000E00) /*!< PLL2 input clock * 16 */ + #define RCC_CFGR2_PLL2MUL20 ((uint32_t)0x00000F00) /*!< PLL2 input clock * 20 */ + +/*!< PLL3MUL configuration */ + #define RCC_CFGR2_PLL3MUL ((uint32_t)0x0000F000) /*!< PLL3MUL[3:0] bits */ + #define RCC_CFGR2_PLL3MUL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ + #define RCC_CFGR2_PLL3MUL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + #define RCC_CFGR2_PLL3MUL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + #define RCC_CFGR2_PLL3MUL_3 ((uint32_t)0x00008000) /*!< Bit 3 */ + + #define RCC_CFGR2_PLL3MUL8 ((uint32_t)0x00006000) /*!< PLL3 input clock * 8 */ + #define RCC_CFGR2_PLL3MUL9 ((uint32_t)0x00007000) /*!< PLL3 input clock * 9 */ + #define RCC_CFGR2_PLL3MUL10 ((uint32_t)0x00008000) /*!< PLL3 input clock * 10 */ + #define RCC_CFGR2_PLL3MUL11 ((uint32_t)0x00009000) /*!< PLL3 input clock * 11 */ + #define RCC_CFGR2_PLL3MUL12 ((uint32_t)0x0000A000) /*!< PLL3 input clock * 12 */ + #define RCC_CFGR2_PLL3MUL13 ((uint32_t)0x0000B000) /*!< PLL3 input clock * 13 */ + #define RCC_CFGR2_PLL3MUL14 ((uint32_t)0x0000C000) /*!< PLL3 input clock * 14 */ + #define RCC_CFGR2_PLL3MUL16 ((uint32_t)0x0000E000) /*!< PLL3 input clock * 16 */ + #define RCC_CFGR2_PLL3MUL20 ((uint32_t)0x0000F000) /*!< PLL3 input clock * 20 */ + + #define RCC_CFGR2_PREDIV1SRC ((uint32_t)0x00010000) /*!< PREDIV1 entry clock source */ + #define RCC_CFGR2_PREDIV1SRC_PLL2 ((uint32_t)0x00010000) /*!< PLL2 selected as PREDIV1 entry clock source */ + #define RCC_CFGR2_PREDIV1SRC_HSE ((uint32_t)0x00000000) /*!< HSE selected as PREDIV1 entry clock source */ + #define RCC_CFGR2_I2S2SRC ((uint32_t)0x00020000) /*!< I2S2 entry clock source */ + #define RCC_CFGR2_I2S3SRC ((uint32_t)0x00040000) /*!< I2S3 clock source */ +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ + #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ + #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ + #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ +#endif + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0 ((uint32_t)0x00000003) /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define GPIO_CRL_MODE0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define GPIO_CRL_MODE1 ((uint32_t)0x00000030) /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define GPIO_CRL_MODE1_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define GPIO_CRL_MODE2 ((uint32_t)0x00000300) /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define GPIO_CRL_MODE2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define GPIO_CRL_MODE3 ((uint32_t)0x00003000) /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define GPIO_CRL_MODE3_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE4 ((uint32_t)0x00030000) /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define GPIO_CRL_MODE4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE5 ((uint32_t)0x00300000) /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define GPIO_CRL_MODE5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE6 ((uint32_t)0x03000000) /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define GPIO_CRL_MODE6_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE7 ((uint32_t)0x30000000) /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define GPIO_CRL_MODE7_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0 ((uint32_t)0x0000000C) /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define GPIO_CRL_CNF0_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define GPIO_CRL_CNF1 ((uint32_t)0x000000C0) /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define GPIO_CRL_CNF1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define GPIO_CRL_CNF2 ((uint32_t)0x00000C00) /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define GPIO_CRL_CNF2_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define GPIO_CRL_CNF3 ((uint32_t)0x0000C000) /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define GPIO_CRL_CNF3_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF4 ((uint32_t)0x000C0000) /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define GPIO_CRL_CNF4_1 ((uint32_t)0x00080000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF5 ((uint32_t)0x00C00000) /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define GPIO_CRL_CNF5_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF6 ((uint32_t)0x0C000000) /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define GPIO_CRL_CNF6_1 ((uint32_t)0x08000000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF7 ((uint32_t)0xC0000000) /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 ((uint32_t)0x40000000) /*!< Bit 0 */ +#define GPIO_CRL_CNF7_1 ((uint32_t)0x80000000) /*!< Bit 1 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8 ((uint32_t)0x00000003) /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define GPIO_CRH_MODE8_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define GPIO_CRH_MODE9 ((uint32_t)0x00000030) /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define GPIO_CRH_MODE9_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define GPIO_CRH_MODE10 ((uint32_t)0x00000300) /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define GPIO_CRH_MODE10_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define GPIO_CRH_MODE11 ((uint32_t)0x00003000) /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define GPIO_CRH_MODE11_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE12 ((uint32_t)0x00030000) /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define GPIO_CRH_MODE12_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE13 ((uint32_t)0x00300000) /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define GPIO_CRH_MODE13_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE14 ((uint32_t)0x03000000) /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define GPIO_CRH_MODE14_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE15 ((uint32_t)0x30000000) /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define GPIO_CRH_MODE15_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8 ((uint32_t)0x0000000C) /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define GPIO_CRH_CNF8_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define GPIO_CRH_CNF9 ((uint32_t)0x000000C0) /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define GPIO_CRH_CNF9_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define GPIO_CRH_CNF10 ((uint32_t)0x00000C00) /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define GPIO_CRH_CNF10_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define GPIO_CRH_CNF11 ((uint32_t)0x0000C000) /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define GPIO_CRH_CNF11_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF12 ((uint32_t)0x000C0000) /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define GPIO_CRH_CNF12_1 ((uint32_t)0x00080000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF13 ((uint32_t)0x00C00000) /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define GPIO_CRH_CNF13_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF14 ((uint32_t)0x0C000000) /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define GPIO_CRH_CNF14_1 ((uint32_t)0x08000000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF15 ((uint32_t)0xC0000000) /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 ((uint32_t)0x40000000) /*!< Bit 0 */ +#define GPIO_CRH_CNF15_1 ((uint32_t)0x80000000) /*!< Bit 1 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0 ((uint16_t)0x0001) /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1 ((uint16_t)0x0002) /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2 ((uint16_t)0x0004) /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3 ((uint16_t)0x0008) /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4 ((uint16_t)0x0010) /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5 ((uint16_t)0x0020) /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6 ((uint16_t)0x0040) /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7 ((uint16_t)0x0080) /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8 ((uint16_t)0x0100) /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9 ((uint16_t)0x0200) /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10 ((uint16_t)0x0400) /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11 ((uint16_t)0x0800) /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12 ((uint16_t)0x1000) /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13 ((uint16_t)0x2000) /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14 ((uint16_t)0x4000) /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15 ((uint16_t)0x8000) /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0 ((uint16_t)0x0001) /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1 ((uint16_t)0x0002) /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2 ((uint16_t)0x0004) /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3 ((uint16_t)0x0008) /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4 ((uint16_t)0x0010) /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5 ((uint16_t)0x0020) /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6 ((uint16_t)0x0040) /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7 ((uint16_t)0x0080) /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8 ((uint16_t)0x0100) /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9 ((uint16_t)0x0200) /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10 ((uint16_t)0x0400) /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11 ((uint16_t)0x0800) /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12 ((uint16_t)0x1000) /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13 ((uint16_t)0x2000) /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14 ((uint16_t)0x4000) /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15 ((uint16_t)0x8000) /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0 ((uint32_t)0x00000001) /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1 ((uint32_t)0x00000002) /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2 ((uint32_t)0x00000004) /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3 ((uint32_t)0x00000008) /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4 ((uint32_t)0x00000010) /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5 ((uint32_t)0x00000020) /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6 ((uint32_t)0x00000040) /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7 ((uint32_t)0x00000080) /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8 ((uint32_t)0x00000100) /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9 ((uint32_t)0x00000200) /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10 ((uint32_t)0x00000400) /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11 ((uint32_t)0x00000800) /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12 ((uint32_t)0x00001000) /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13 ((uint32_t)0x00002000) /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14 ((uint32_t)0x00004000) /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15 ((uint32_t)0x00008000) /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0 ((uint32_t)0x00010000) /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1 ((uint32_t)0x00020000) /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2 ((uint32_t)0x00040000) /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3 ((uint32_t)0x00080000) /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4 ((uint32_t)0x00100000) /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5 ((uint32_t)0x00200000) /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6 ((uint32_t)0x00400000) /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7 ((uint32_t)0x00800000) /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8 ((uint32_t)0x01000000) /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9 ((uint32_t)0x02000000) /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10 ((uint32_t)0x04000000) /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11 ((uint32_t)0x08000000) /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12 ((uint32_t)0x10000000) /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13 ((uint32_t)0x20000000) /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14 ((uint32_t)0x40000000) /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15 ((uint32_t)0x80000000) /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0 ((uint16_t)0x0001) /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1 ((uint16_t)0x0002) /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2 ((uint16_t)0x0004) /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3 ((uint16_t)0x0008) /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4 ((uint16_t)0x0010) /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5 ((uint16_t)0x0020) /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6 ((uint16_t)0x0040) /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7 ((uint16_t)0x0080) /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8 ((uint16_t)0x0100) /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9 ((uint16_t)0x0200) /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10 ((uint16_t)0x0400) /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11 ((uint16_t)0x0800) /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12 ((uint16_t)0x1000) /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13 ((uint16_t)0x2000) /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14 ((uint16_t)0x4000) /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15 ((uint16_t)0x8000) /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001) /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002) /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004) /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008) /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010) /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020) /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040) /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080) /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100) /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200) /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400) /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800) /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000) /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000) /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000) /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000) /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK ((uint32_t)0x00010000) /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN ((uint8_t)0x0F) /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define AFIO_EVCR_PIN_1 ((uint8_t)0x02) /*!< Bit 1 */ +#define AFIO_EVCR_PIN_2 ((uint8_t)0x04) /*!< Bit 2 */ +#define AFIO_EVCR_PIN_3 ((uint8_t)0x08) /*!< Bit 3 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 ((uint8_t)0x00) /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1 ((uint8_t)0x01) /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2 ((uint8_t)0x02) /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3 ((uint8_t)0x03) /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4 ((uint8_t)0x04) /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5 ((uint8_t)0x05) /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6 ((uint8_t)0x06) /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7 ((uint8_t)0x07) /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8 ((uint8_t)0x08) /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9 ((uint8_t)0x09) /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10 ((uint8_t)0x0A) /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11 ((uint8_t)0x0B) /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12 ((uint8_t)0x0C) /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13 ((uint8_t)0x0D) /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14 ((uint8_t)0x0E) /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15 ((uint8_t)0x0F) /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT ((uint8_t)0x70) /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 ((uint8_t)0x10) /*!< Bit 0 */ +#define AFIO_EVCR_PORT_1 ((uint8_t)0x20) /*!< Bit 1 */ +#define AFIO_EVCR_PORT_2 ((uint8_t)0x40) /*!< Bit 2 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA ((uint8_t)0x00) /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB ((uint8_t)0x10) /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC ((uint8_t)0x20) /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD ((uint8_t)0x30) /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE ((uint8_t)0x40) /*!< Port E selected */ + +#define AFIO_EVCR_EVOE ((uint8_t)0x80) /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP ((uint32_t)0x00000001) /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP ((uint32_t)0x00000002) /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP ((uint32_t)0x00000004) /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP ((uint32_t)0x00000008) /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP ((uint32_t)0x00000030) /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define AFIO_MAPR_USART3_REMAP_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP ((uint32_t)0x00000010) /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP ((uint32_t)0x00000030) /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP ((uint32_t)0x000000C0) /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define AFIO_MAPR_TIM1_REMAP_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP ((uint32_t)0x00000040) /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP ((uint32_t)0x000000C0) /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP ((uint32_t)0x00000300) /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define AFIO_MAPR_TIM2_REMAP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 ((uint32_t)0x00000100) /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 ((uint32_t)0x00000200) /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP ((uint32_t)0x00000300) /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP ((uint32_t)0x00000C00) /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define AFIO_MAPR_TIM3_REMAP_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP ((uint32_t)0x00000800) /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP ((uint32_t)0x00000C00) /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP ((uint32_t)0x00001000) /*!< TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_MAPR_CAN_REMAP ((uint32_t)0x00006000) /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define AFIO_MAPR_CAN_REMAP_1 ((uint32_t)0x00004000) /*!< Bit 1 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 ((uint32_t)0x00004000) /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 ((uint32_t)0x00006000) /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP ((uint32_t)0x00008000) /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP ((uint32_t)0x00010000) /*!< TIM5 Channel4 Internal Remap */ +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP ((uint32_t)0x00020000) /*!< ADC 1 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC1_ETRGREG_REMAP ((uint32_t)0x00040000) /*!< ADC 1 External Trigger Regular Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP ((uint32_t)0x00080000) /*!< ADC 2 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGREG_REMAP ((uint32_t)0x00100000) /*!< ADC 2 External Trigger Regular Conversion remapping */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG ((uint32_t)0x07000000) /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define AFIO_MAPR_SWJ_CFG_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define AFIO_MAPR_SWJ_CFG_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define AFIO_MAPR_SWJ_CFG_RESET ((uint32_t)0x00000000) /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST ((uint32_t)0x01000000) /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE ((uint32_t)0x04000000) /*!< JTAG-DP Disabled and SW-DP Disabled */ + +#ifdef STM32F10X_CL +/*!< ETH_REMAP configuration */ + #define AFIO_MAPR_ETH_REMAP ((uint32_t)0x00200000) /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */ + +/*!< CAN2_REMAP configuration */ + #define AFIO_MAPR_CAN2_REMAP ((uint32_t)0x00400000) /*!< CAN2_REMAP bit (CAN2 I/O remapping) */ + +/*!< MII_RMII_SEL configuration */ + #define AFIO_MAPR_MII_RMII_SEL ((uint32_t)0x00800000) /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */ + +/*!< SPI3_REMAP configuration */ + #define AFIO_MAPR_SPI3_REMAP ((uint32_t)0x10000000) /*!< SPI3_REMAP bit (SPI3 remapping) */ + +/*!< TIM2ITR1_IREMAP configuration */ + #define AFIO_MAPR_TIM2ITR1_IREMAP ((uint32_t)0x20000000) /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */ + +/*!< PTP_PPS_REMAP configuration */ + #define AFIO_MAPR_PTP_PPS_REMAP ((uint32_t)0x40000000) /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */ +#endif + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /*!< PG[15] pin */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/****************** Bit definition for AFIO_MAPR2 register ******************/ +#define AFIO_MAPR2_TIM15_REMAP ((uint32_t)0x00000001) /*!< TIM15 remapping */ +#define AFIO_MAPR2_TIM16_REMAP ((uint32_t)0x00000002) /*!< TIM16 remapping */ +#define AFIO_MAPR2_TIM17_REMAP ((uint32_t)0x00000004) /*!< TIM17 remapping */ +#define AFIO_MAPR2_CEC_REMAP ((uint32_t)0x00000008) /*!< CEC remapping */ +#define AFIO_MAPR2_TIM1_DMA_REMAP ((uint32_t)0x00000010) /*!< TIM1_DMA remapping */ +#endif + +#ifdef STM32F10X_HD_VL +#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */ +#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */ +#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP ((uint32_t)0x00000800) /*!< TIM6/TIM7 and DAC DMA remapping */ +#define AFIO_MAPR2_TIM12_REMAP ((uint32_t)0x00001000) /*!< TIM12 remapping */ +#define AFIO_MAPR2_MISC_REMAP ((uint32_t)0x00002000) /*!< Miscellaneous remapping */ +#endif + +#ifdef STM32F10X_XL +/****************** Bit definition for AFIO_MAPR2 register ******************/ +#define AFIO_MAPR2_TIM9_REMAP ((uint32_t)0x00000020) /*!< TIM9 remapping */ +#define AFIO_MAPR2_TIM10_REMAP ((uint32_t)0x00000040) /*!< TIM10 remapping */ +#define AFIO_MAPR2_TIM11_REMAP ((uint32_t)0x00000080) /*!< TIM11 remapping */ +#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */ +#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */ +#endif + +/******************************************************************************/ +/* */ +/* SystemTick */ +/* */ +/******************************************************************************/ + +/***************** Bit definition for SysTick_CTRL register *****************/ +#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */ +#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */ +#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */ +#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */ + +/***************** Bit definition for SysTick_LOAD register *****************/ +#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */ + +/***************** Bit definition for SysTick_VAL register ******************/ +#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */ + +/***************** Bit definition for SysTick_CALIB register ****************/ +#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */ +#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */ +#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */ + +/******************************************************************************/ +/* */ +/* Nested Vectored Interrupt Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for NVIC_ISER register *******************/ +#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */ +#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICER register *******************/ +#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */ +#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ISPR register *******************/ +#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */ +#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICPR register *******************/ +#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */ +#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_IABR register *******************/ +#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */ +#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_PRI0 register *******************/ +#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */ +#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */ +#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */ +#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */ + +/****************** Bit definition for NVIC_PRI1 register *******************/ +#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */ +#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */ +#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */ +#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */ + +/****************** Bit definition for NVIC_PRI2 register *******************/ +#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */ +#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */ +#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */ +#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */ + +/****************** Bit definition for NVIC_PRI3 register *******************/ +#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */ +#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */ +#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */ +#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */ + +/****************** Bit definition for NVIC_PRI4 register *******************/ +#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */ +#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */ +#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */ +#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */ + +/****************** Bit definition for NVIC_PRI5 register *******************/ +#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */ +#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */ +#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */ +#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */ + +/****************** Bit definition for NVIC_PRI6 register *******************/ +#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */ +#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */ +#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */ +#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */ + +/****************** Bit definition for NVIC_PRI7 register *******************/ +#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */ +#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */ +#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */ +#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */ + +/****************** Bit definition for SCB_CPUID register *******************/ +#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */ +#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */ +#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */ +#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */ +#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */ + +/******************* Bit definition for SCB_ICSR register *******************/ +#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */ +#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */ +#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */ +#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */ +#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */ +#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */ +#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */ +#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */ +#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */ +#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */ + +/******************* Bit definition for SCB_VTOR register *******************/ +#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */ +#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */ + +/*!<***************** Bit definition for SCB_AIRCR register *******************/ +#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */ +#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */ +#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */ + +#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */ +#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +/* prority group configuration */ +#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */ +#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */ + +#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */ +#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */ + +/******************* Bit definition for SCB_SCR register ********************/ +#define SCB_SCR_SLEEPONEXIT ((uint8_t)0x02) /*!< Sleep on exit bit */ +#define SCB_SCR_SLEEPDEEP ((uint8_t)0x04) /*!< Sleep deep bit */ +#define SCB_SCR_SEVONPEND ((uint8_t)0x10) /*!< Wake up from WFE */ + +/******************** Bit definition for SCB_CCR register *******************/ +#define SCB_CCR_NONBASETHRDENA ((uint16_t)0x0001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */ +#define SCB_CCR_USERSETMPEND ((uint16_t)0x0002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */ +#define SCB_CCR_UNALIGN_TRP ((uint16_t)0x0008) /*!< Trap for unaligned access */ +#define SCB_CCR_DIV_0_TRP ((uint16_t)0x0010) /*!< Trap on Divide by 0 */ +#define SCB_CCR_BFHFNMIGN ((uint16_t)0x0100) /*!< Handlers running at priority -1 and -2 */ +#define SCB_CCR_STKALIGN ((uint16_t)0x0200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */ + +/******************* Bit definition for SCB_SHPR register ********************/ +#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */ +#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */ +#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */ +#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */ + +/****************** Bit definition for SCB_SHCSR register *******************/ +#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */ +#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */ +#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */ +#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */ +#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */ +#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */ +#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */ +#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */ +#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */ +#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */ +#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */ +#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */ +#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */ +#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */ + +/******************* Bit definition for SCB_CFSR register *******************/ +/*!< MFSR */ +#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */ +#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */ +#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */ +#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */ +#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */ +/*!< BFSR */ +#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */ +#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */ +#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */ +#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */ +#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */ +#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */ +/*!< UFSR */ +#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to execute an undefined instruction */ +#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */ +#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */ +#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */ +#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */ +#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */ + +/******************* Bit definition for SCB_HFSR register *******************/ +#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occurs because of vector table read on exception processing */ +#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */ +#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */ + +/******************* Bit definition for SCB_DFSR register *******************/ +#define SCB_DFSR_HALTED ((uint8_t)0x01) /*!< Halt request flag */ +#define SCB_DFSR_BKPT ((uint8_t)0x02) /*!< BKPT flag */ +#define SCB_DFSR_DWTTRAP ((uint8_t)0x04) /*!< Data Watchpoint and Trace (DWT) flag */ +#define SCB_DFSR_VCATCH ((uint8_t)0x08) /*!< Vector catch flag */ +#define SCB_DFSR_EXTERNAL ((uint8_t)0x10) /*!< External debug request flag */ + +/******************* Bit definition for SCB_MMFAR register ******************/ +#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */ + +/******************* Bit definition for SCB_BFAR register *******************/ +#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */ + +/******************* Bit definition for SCB_afsr register *******************/ +#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */ +#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */ +#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */ + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */ + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */ +#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */ + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR1 register *******************/ +#define DMA_CCR1_EN ((uint16_t)0x0001) /*!< Channel enable*/ +#define DMA_CCR1_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR1_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR1_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR1_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR1_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR1_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR1_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR1_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR1_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR1_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR1_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR1_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR1_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR1_PL ((uint16_t)0x3000) /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR1_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR1_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR1_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR2 register *******************/ +#define DMA_CCR2_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR2_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR2_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR2_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR2_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR2_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR2_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR2_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR2_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR2_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR2_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR2_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR2_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR2_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR2_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR2_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR2_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR2_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR3 register *******************/ +#define DMA_CCR3_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR3_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR3_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR3_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR3_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR3_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR3_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR3_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR3_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR3_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR3_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR3_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR3_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR3_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR3_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR3_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR3_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR3_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/*!<****************** Bit definition for DMA_CCR4 register *******************/ +#define DMA_CCR4_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR4_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR4_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR4_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR4_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR4_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR4_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR4_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR4_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR4_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR4_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR4_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR4_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR4_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR4_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR4_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR4_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR4_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CCR5 register *******************/ +#define DMA_CCR5_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR5_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR5_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR5_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR5_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR5_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR5_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR5_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR5_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR5_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR5_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR5_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR5_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR5_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR5_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR5_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR5_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR5_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */ + +/******************* Bit definition for DMA_CCR6 register *******************/ +#define DMA_CCR6_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR6_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR6_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR6_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR6_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR6_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR6_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR6_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR6_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR6_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR6_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR6_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR6_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR6_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR6_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR6_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR6_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR6_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR7 register *******************/ +#define DMA_CCR7_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR7_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR7_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR7_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR7_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR7_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR7_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR7_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR7_PSIZE , ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR7_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR7_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR7_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR7_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR7_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR7_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR7_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR7_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR7_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */ + +/****************** Bit definition for DMA_CNDTR1 register ******************/ +#define DMA_CNDTR1_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR2 register ******************/ +#define DMA_CNDTR2_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR3 register ******************/ +#define DMA_CNDTR3_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR4 register ******************/ +#define DMA_CNDTR4_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR5 register ******************/ +#define DMA_CNDTR5_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR6 register ******************/ +#define DMA_CNDTR6_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR7 register ******************/ +#define DMA_CNDTR7_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR1 register *******************/ +#define DMA_CPAR1_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR2 register *******************/ +#define DMA_CPAR2_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR3 register *******************/ +#define DMA_CPAR3_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + + +/****************** Bit definition for DMA_CPAR4 register *******************/ +#define DMA_CPAR4_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR5 register *******************/ +#define DMA_CPAR5_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR6 register *******************/ +#define DMA_CPAR6_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + + +/****************** Bit definition for DMA_CPAR7 register *******************/ +#define DMA_CPAR7_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR1 register *******************/ +#define DMA_CMAR1_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR2 register *******************/ +#define DMA_CMAR2_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR3 register *******************/ +#define DMA_CMAR3_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + + +/****************** Bit definition for DMA_CMAR4 register *******************/ +#define DMA_CMAR4_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR5 register *******************/ +#define DMA_CMAR5_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR6 register *******************/ +#define DMA_CMAR6_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR7 register *******************/ +#define DMA_CMAR7_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD ((uint8_t)0x01) /*!< Analog watchdog flag */ +#define ADC_SR_EOC ((uint8_t)0x02) /*!< End of conversion */ +#define ADC_SR_JEOC ((uint8_t)0x04) /*!< Injected channel end of conversion */ +#define ADC_SR_JSTRT ((uint8_t)0x08) /*!< Injected channel Start flag */ +#define ADC_SR_STRT ((uint8_t)0x10) /*!< Regular channel Start flag */ + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */ +#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!< Interrupt enable for EOC */ +#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!< Analog Watchdog interrupt enable */ +#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!< Interrupt enable for injected channels */ +#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!< Scan mode */ +#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!< Enable the watchdog on a single channel in scan mode */ +#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!< Automatic injected group conversion */ +#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!< Discontinuous mode on regular channels */ +#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!< Discontinuous mode on injected channels */ + +#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */ +#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!< Bit 2 */ + +#define ADC_CR1_DUALMOD ((uint32_t)0x000F0000) /*!< DUALMOD[3:0] bits (Dual mode selection) */ +#define ADC_CR1_DUALMOD_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define ADC_CR1_DUALMOD_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define ADC_CR1_DUALMOD_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define ADC_CR1_DUALMOD_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!< Analog watchdog enable on injected channels */ +#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */ + + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */ +#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */ +#define ADC_CR2_CAL ((uint32_t)0x00000004) /*!< A/D Calibration */ +#define ADC_CR2_RSTCAL ((uint32_t)0x00000008) /*!< Reset Calibration */ +#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!< Direct Memory access mode */ +#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!< Data Alignment */ + +#define ADC_CR2_JEXTSEL ((uint32_t)0x00007000) /*!< JEXTSEL[2:0] bits (External event select for injected group) */ +#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_CR2_JEXTTRIG ((uint32_t)0x00008000) /*!< External Trigger Conversion mode for injected channels */ + +#define ADC_CR2_EXTSEL ((uint32_t)0x000E0000) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */ +#define ADC_CR2_EXTSEL_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define ADC_CR2_EXTSEL_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define ADC_CR2_EXTSEL_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +#define ADC_CR2_EXTTRIG ((uint32_t)0x00100000) /*!< External Trigger Conversion mode for regular channels */ +#define ADC_CR2_JSWSTART ((uint32_t)0x00200000) /*!< Start Conversion of injected channels */ +#define ADC_CR2_SWSTART ((uint32_t)0x00400000) /*!< Start Conversion of regular channels */ +#define ADC_CR2_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */ +#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */ +#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */ +#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */ +#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */ +#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!< SMP15[2:0] bits (Channel 15 Sample time selection) */ +#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */ +#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */ +#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */ +#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */ +#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */ +#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */ +#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */ +#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */ +#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */ +#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */ +#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */ +#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */ +#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 1 */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 2 */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 3 */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 4 */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT ((uint16_t)0x0FFF) /*!< Analog watchdog high threshold */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT ((uint16_t)0x0FFF) /*!< Analog watchdog low threshold */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!< SQ13[4:0] bits (13th conversion in regular sequence) */ +#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!< SQ14[4:0] bits (14th conversion in regular sequence) */ +#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!< SQ15[4:0] bits (15th conversion in regular sequence) */ +#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!< SQ16[4:0] bits (16th conversion in regular sequence) */ +#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!< L[3:0] bits (Regular channel sequence length) */ +#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!< SQ7[4:0] bits (7th conversion in regular sequence) */ +#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!< SQ8[4:0] bits (8th conversion in regular sequence) */ +#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!< SQ9[4:0] bits (9th conversion in regular sequence) */ +#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!< SQ10[4:0] bits (10th conversion in regular sequence) */ +#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!< SQ11[4:0] bits (11th conversion in regular sequence) */ +#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!< SQ12[4:0] bits (12th conversion in regular sequence) */ +#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!< SQ1[4:0] bits (1st conversion in regular sequence) */ +#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */ +#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */ +#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!< SQ4[4:0] bits (4th conversion in regular sequence) */ +#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!< SQ5[4:0] bits (5th conversion in regular sequence) */ +#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!< SQ6[4:0] bits (6th conversion in regular sequence) */ +#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */ +#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */ +#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */ +#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */ +#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!< JL[1:0] bits (Injected Sequence length) */ +#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */ +#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!< ADC2 data */ + +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */ +#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */ +#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */ + +#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1 ((uint8_t)0x01) /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2 ((uint8_t)0x02) /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR ((uint16_t)0x0FFF) /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR ((uint16_t)0xFFF0) /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR ((uint8_t)0xFF) /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR ((uint16_t)0x0FFF) /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR ((uint16_t)0xFFF0) /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR ((uint8_t)0xFF) /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR ((uint16_t)0x00FF) /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR ((uint16_t)0xFF00) /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR ((uint16_t)0x0FFF) /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR ((uint16_t)0x0FFF) /*!< DAC channel2 data output */ + +/******************** Bit definition for DAC_SR register ********************/ +#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */ +#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */ + +/******************************************************************************/ +/* */ +/* CEC */ +/* */ +/******************************************************************************/ +/******************** Bit definition for CEC_CFGR register ******************/ +#define CEC_CFGR_PE ((uint16_t)0x0001) /*!< Peripheral Enable */ +#define CEC_CFGR_IE ((uint16_t)0x0002) /*!< Interrupt Enable */ +#define CEC_CFGR_BTEM ((uint16_t)0x0004) /*!< Bit Timing Error Mode */ +#define CEC_CFGR_BPEM ((uint16_t)0x0008) /*!< Bit Period Error Mode */ + +/******************** Bit definition for CEC_OAR register ******************/ +#define CEC_OAR_OA ((uint16_t)0x000F) /*!< OA[3:0]: Own Address */ +#define CEC_OAR_OA_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define CEC_OAR_OA_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define CEC_OAR_OA_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define CEC_OAR_OA_3 ((uint16_t)0x0008) /*!< Bit 3 */ + +/******************** Bit definition for CEC_PRES register ******************/ +#define CEC_PRES_PRES ((uint16_t)0x3FFF) /*!< Prescaler Counter Value */ + +/******************** Bit definition for CEC_ESR register ******************/ +#define CEC_ESR_BTE ((uint16_t)0x0001) /*!< Bit Timing Error */ +#define CEC_ESR_BPE ((uint16_t)0x0002) /*!< Bit Period Error */ +#define CEC_ESR_RBTFE ((uint16_t)0x0004) /*!< Rx Block Transfer Finished Error */ +#define CEC_ESR_SBE ((uint16_t)0x0008) /*!< Start Bit Error */ +#define CEC_ESR_ACKE ((uint16_t)0x0010) /*!< Block Acknowledge Error */ +#define CEC_ESR_LINE ((uint16_t)0x0020) /*!< Line Error */ +#define CEC_ESR_TBTFE ((uint16_t)0x0040) /*!< Tx Block Transfer Finished Error */ + +/******************** Bit definition for CEC_CSR register ******************/ +#define CEC_CSR_TSOM ((uint16_t)0x0001) /*!< Tx Start Of Message */ +#define CEC_CSR_TEOM ((uint16_t)0x0002) /*!< Tx End Of Message */ +#define CEC_CSR_TERR ((uint16_t)0x0004) /*!< Tx Error */ +#define CEC_CSR_TBTRF ((uint16_t)0x0008) /*!< Tx Byte Transfer Request or Block Transfer Finished */ +#define CEC_CSR_RSOM ((uint16_t)0x0010) /*!< Rx Start Of Message */ +#define CEC_CSR_REOM ((uint16_t)0x0020) /*!< Rx End Of Message */ +#define CEC_CSR_RERR ((uint16_t)0x0040) /*!< Rx Error */ +#define CEC_CSR_RBTF ((uint16_t)0x0080) /*!< Rx Block Transfer Finished */ + +/******************** Bit definition for CEC_TXD register ******************/ +#define CEC_TXD_TXD ((uint16_t)0x00FF) /*!< Tx Data register */ + +/******************** Bit definition for CEC_RXD register ******************/ +#define CEC_RXD_RXD ((uint16_t)0x00FF) /*!< Rx Data register */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN ((uint16_t)0x0001) /*!< Counter enable */ +#define TIM_CR1_UDIS ((uint16_t)0x0002) /*!< Update disable */ +#define TIM_CR1_URS ((uint16_t)0x0004) /*!< Update request source */ +#define TIM_CR1_OPM ((uint16_t)0x0008) /*!< One pulse mode */ +#define TIM_CR1_DIR ((uint16_t)0x0010) /*!< Direction */ + +#define TIM_CR1_CMS ((uint16_t)0x0060) /*!< CMS[1:0] bits (Center-aligned mode selection) */ +#define TIM_CR1_CMS_0 ((uint16_t)0x0020) /*!< Bit 0 */ +#define TIM_CR1_CMS_1 ((uint16_t)0x0040) /*!< Bit 1 */ + +#define TIM_CR1_ARPE ((uint16_t)0x0080) /*!< Auto-reload preload enable */ + +#define TIM_CR1_CKD ((uint16_t)0x0300) /*!< CKD[1:0] bits (clock division) */ +#define TIM_CR1_CKD_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CR1_CKD_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +/******************* Bit definition for TIM_CR2 register ********************/ +#define TIM_CR2_CCPC ((uint16_t)0x0001) /*!< Capture/Compare Preloaded Control */ +#define TIM_CR2_CCUS ((uint16_t)0x0004) /*!< Capture/Compare Control Update Selection */ +#define TIM_CR2_CCDS ((uint16_t)0x0008) /*!< Capture/Compare DMA Selection */ + +#define TIM_CR2_MMS ((uint16_t)0x0070) /*!< MMS[2:0] bits (Master Mode Selection) */ +#define TIM_CR2_MMS_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CR2_MMS_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CR2_MMS_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CR2_TI1S ((uint16_t)0x0080) /*!< TI1 Selection */ +#define TIM_CR2_OIS1 ((uint16_t)0x0100) /*!< Output Idle state 1 (OC1 output) */ +#define TIM_CR2_OIS1N ((uint16_t)0x0200) /*!< Output Idle state 1 (OC1N output) */ +#define TIM_CR2_OIS2 ((uint16_t)0x0400) /*!< Output Idle state 2 (OC2 output) */ +#define TIM_CR2_OIS2N ((uint16_t)0x0800) /*!< Output Idle state 2 (OC2N output) */ +#define TIM_CR2_OIS3 ((uint16_t)0x1000) /*!< Output Idle state 3 (OC3 output) */ +#define TIM_CR2_OIS3N ((uint16_t)0x2000) /*!< Output Idle state 3 (OC3N output) */ +#define TIM_CR2_OIS4 ((uint16_t)0x4000) /*!< Output Idle state 4 (OC4 output) */ + +/******************* Bit definition for TIM_SMCR register *******************/ +#define TIM_SMCR_SMS ((uint16_t)0x0007) /*!< SMS[2:0] bits (Slave mode selection) */ +#define TIM_SMCR_SMS_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_SMCR_SMS_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_SMCR_SMS_2 ((uint16_t)0x0004) /*!< Bit 2 */ + +#define TIM_SMCR_TS ((uint16_t)0x0070) /*!< TS[2:0] bits (Trigger selection) */ +#define TIM_SMCR_TS_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_SMCR_TS_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_SMCR_TS_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_SMCR_MSM ((uint16_t)0x0080) /*!< Master/slave mode */ + +#define TIM_SMCR_ETF ((uint16_t)0x0F00) /*!< ETF[3:0] bits (External trigger filter) */ +#define TIM_SMCR_ETF_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_SMCR_ETF_1 ((uint16_t)0x0200) /*!< Bit 1 */ +#define TIM_SMCR_ETF_2 ((uint16_t)0x0400) /*!< Bit 2 */ +#define TIM_SMCR_ETF_3 ((uint16_t)0x0800) /*!< Bit 3 */ + +#define TIM_SMCR_ETPS ((uint16_t)0x3000) /*!< ETPS[1:0] bits (External trigger prescaler) */ +#define TIM_SMCR_ETPS_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_SMCR_ETPS_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define TIM_SMCR_ECE ((uint16_t)0x4000) /*!< External clock enable */ +#define TIM_SMCR_ETP ((uint16_t)0x8000) /*!< External trigger polarity */ + +/******************* Bit definition for TIM_DIER register *******************/ +#define TIM_DIER_UIE ((uint16_t)0x0001) /*!< Update interrupt enable */ +#define TIM_DIER_CC1IE ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt enable */ +#define TIM_DIER_CC2IE ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt enable */ +#define TIM_DIER_CC3IE ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt enable */ +#define TIM_DIER_CC4IE ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt enable */ +#define TIM_DIER_COMIE ((uint16_t)0x0020) /*!< COM interrupt enable */ +#define TIM_DIER_TIE ((uint16_t)0x0040) /*!< Trigger interrupt enable */ +#define TIM_DIER_BIE ((uint16_t)0x0080) /*!< Break interrupt enable */ +#define TIM_DIER_UDE ((uint16_t)0x0100) /*!< Update DMA request enable */ +#define TIM_DIER_CC1DE ((uint16_t)0x0200) /*!< Capture/Compare 1 DMA request enable */ +#define TIM_DIER_CC2DE ((uint16_t)0x0400) /*!< Capture/Compare 2 DMA request enable */ +#define TIM_DIER_CC3DE ((uint16_t)0x0800) /*!< Capture/Compare 3 DMA request enable */ +#define TIM_DIER_CC4DE ((uint16_t)0x1000) /*!< Capture/Compare 4 DMA request enable */ +#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!< COM DMA request enable */ +#define TIM_DIER_TDE ((uint16_t)0x4000) /*!< Trigger DMA request enable */ + +/******************** Bit definition for TIM_SR register ********************/ +#define TIM_SR_UIF ((uint16_t)0x0001) /*!< Update interrupt Flag */ +#define TIM_SR_CC1IF ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt Flag */ +#define TIM_SR_CC2IF ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt Flag */ +#define TIM_SR_CC3IF ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt Flag */ +#define TIM_SR_CC4IF ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt Flag */ +#define TIM_SR_COMIF ((uint16_t)0x0020) /*!< COM interrupt Flag */ +#define TIM_SR_TIF ((uint16_t)0x0040) /*!< Trigger interrupt Flag */ +#define TIM_SR_BIF ((uint16_t)0x0080) /*!< Break interrupt Flag */ +#define TIM_SR_CC1OF ((uint16_t)0x0200) /*!< Capture/Compare 1 Overcapture Flag */ +#define TIM_SR_CC2OF ((uint16_t)0x0400) /*!< Capture/Compare 2 Overcapture Flag */ +#define TIM_SR_CC3OF ((uint16_t)0x0800) /*!< Capture/Compare 3 Overcapture Flag */ +#define TIM_SR_CC4OF ((uint16_t)0x1000) /*!< Capture/Compare 4 Overcapture Flag */ + +/******************* Bit definition for TIM_EGR register ********************/ +#define TIM_EGR_UG ((uint8_t)0x01) /*!< Update Generation */ +#define TIM_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation */ +#define TIM_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation */ +#define TIM_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation */ +#define TIM_EGR_CC4G ((uint8_t)0x10) /*!< Capture/Compare 4 Generation */ +#define TIM_EGR_COMG ((uint8_t)0x20) /*!< Capture/Compare Control Update Generation */ +#define TIM_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation */ +#define TIM_EGR_BG ((uint8_t)0x80) /*!< Break Generation */ + +/****************** Bit definition for TIM_CCMR1 register *******************/ +#define TIM_CCMR1_CC1S ((uint16_t)0x0003) /*!< CC1S[1:0] bits (Capture/Compare 1 Selection) */ +#define TIM_CCMR1_CC1S_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_CCMR1_CC1S_1 ((uint16_t)0x0002) /*!< Bit 1 */ + +#define TIM_CCMR1_OC1FE ((uint16_t)0x0004) /*!< Output Compare 1 Fast enable */ +#define TIM_CCMR1_OC1PE ((uint16_t)0x0008) /*!< Output Compare 1 Preload enable */ + +#define TIM_CCMR1_OC1M ((uint16_t)0x0070) /*!< OC1M[2:0] bits (Output Compare 1 Mode) */ +#define TIM_CCMR1_OC1M_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR1_OC1M_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR1_OC1M_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CCMR1_OC1CE ((uint16_t)0x0080) /*!< Output Compare 1Clear Enable */ + +#define TIM_CCMR1_CC2S ((uint16_t)0x0300) /*!< CC2S[1:0] bits (Capture/Compare 2 Selection) */ +#define TIM_CCMR1_CC2S_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CCMR1_CC2S_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_CCMR1_OC2FE ((uint16_t)0x0400) /*!< Output Compare 2 Fast enable */ +#define TIM_CCMR1_OC2PE ((uint16_t)0x0800) /*!< Output Compare 2 Preload enable */ + +#define TIM_CCMR1_OC2M ((uint16_t)0x7000) /*!< OC2M[2:0] bits (Output Compare 2 Mode) */ +#define TIM_CCMR1_OC2M_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR1_OC2M_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR1_OC2M_2 ((uint16_t)0x4000) /*!< Bit 2 */ + +#define TIM_CCMR1_OC2CE ((uint16_t)0x8000) /*!< Output Compare 2 Clear Enable */ + +/*----------------------------------------------------------------------------*/ + +#define TIM_CCMR1_IC1PSC ((uint16_t)0x000C) /*!< IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ +#define TIM_CCMR1_IC1PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */ +#define TIM_CCMR1_IC1PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */ + +#define TIM_CCMR1_IC1F ((uint16_t)0x00F0) /*!< IC1F[3:0] bits (Input Capture 1 Filter) */ +#define TIM_CCMR1_IC1F_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR1_IC1F_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR1_IC1F_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define TIM_CCMR1_IC1F_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define TIM_CCMR1_IC2PSC ((uint16_t)0x0C00) /*!< IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ +#define TIM_CCMR1_IC2PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define TIM_CCMR1_IC2PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define TIM_CCMR1_IC2F ((uint16_t)0xF000) /*!< IC2F[3:0] bits (Input Capture 2 Filter) */ +#define TIM_CCMR1_IC2F_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR1_IC2F_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR1_IC2F_2 ((uint16_t)0x4000) /*!< Bit 2 */ +#define TIM_CCMR1_IC2F_3 ((uint16_t)0x8000) /*!< Bit 3 */ + +/****************** Bit definition for TIM_CCMR2 register *******************/ +#define TIM_CCMR2_CC3S ((uint16_t)0x0003) /*!< CC3S[1:0] bits (Capture/Compare 3 Selection) */ +#define TIM_CCMR2_CC3S_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_CCMR2_CC3S_1 ((uint16_t)0x0002) /*!< Bit 1 */ + +#define TIM_CCMR2_OC3FE ((uint16_t)0x0004) /*!< Output Compare 3 Fast enable */ +#define TIM_CCMR2_OC3PE ((uint16_t)0x0008) /*!< Output Compare 3 Preload enable */ + +#define TIM_CCMR2_OC3M ((uint16_t)0x0070) /*!< OC3M[2:0] bits (Output Compare 3 Mode) */ +#define TIM_CCMR2_OC3M_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR2_OC3M_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR2_OC3M_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CCMR2_OC3CE ((uint16_t)0x0080) /*!< Output Compare 3 Clear Enable */ + +#define TIM_CCMR2_CC4S ((uint16_t)0x0300) /*!< CC4S[1:0] bits (Capture/Compare 4 Selection) */ +#define TIM_CCMR2_CC4S_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CCMR2_CC4S_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_CCMR2_OC4FE ((uint16_t)0x0400) /*!< Output Compare 4 Fast enable */ +#define TIM_CCMR2_OC4PE ((uint16_t)0x0800) /*!< Output Compare 4 Preload enable */ + +#define TIM_CCMR2_OC4M ((uint16_t)0x7000) /*!< OC4M[2:0] bits (Output Compare 4 Mode) */ +#define TIM_CCMR2_OC4M_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR2_OC4M_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR2_OC4M_2 ((uint16_t)0x4000) /*!< Bit 2 */ + +#define TIM_CCMR2_OC4CE ((uint16_t)0x8000) /*!< Output Compare 4 Clear Enable */ + +/*----------------------------------------------------------------------------*/ + +#define TIM_CCMR2_IC3PSC ((uint16_t)0x000C) /*!< IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ +#define TIM_CCMR2_IC3PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */ +#define TIM_CCMR2_IC3PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */ + +#define TIM_CCMR2_IC3F ((uint16_t)0x00F0) /*!< IC3F[3:0] bits (Input Capture 3 Filter) */ +#define TIM_CCMR2_IC3F_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR2_IC3F_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR2_IC3F_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define TIM_CCMR2_IC3F_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define TIM_CCMR2_IC4PSC ((uint16_t)0x0C00) /*!< IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ +#define TIM_CCMR2_IC4PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define TIM_CCMR2_IC4PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define TIM_CCMR2_IC4F ((uint16_t)0xF000) /*!< IC4F[3:0] bits (Input Capture 4 Filter) */ +#define TIM_CCMR2_IC4F_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR2_IC4F_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR2_IC4F_2 ((uint16_t)0x4000) /*!< Bit 2 */ +#define TIM_CCMR2_IC4F_3 ((uint16_t)0x8000) /*!< Bit 3 */ + +/******************* Bit definition for TIM_CCER register *******************/ +#define TIM_CCER_CC1E ((uint16_t)0x0001) /*!< Capture/Compare 1 output enable */ +#define TIM_CCER_CC1P ((uint16_t)0x0002) /*!< Capture/Compare 1 output Polarity */ +#define TIM_CCER_CC1NE ((uint16_t)0x0004) /*!< Capture/Compare 1 Complementary output enable */ +#define TIM_CCER_CC1NP ((uint16_t)0x0008) /*!< Capture/Compare 1 Complementary output Polarity */ +#define TIM_CCER_CC2E ((uint16_t)0x0010) /*!< Capture/Compare 2 output enable */ +#define TIM_CCER_CC2P ((uint16_t)0x0020) /*!< Capture/Compare 2 output Polarity */ +#define TIM_CCER_CC2NE ((uint16_t)0x0040) /*!< Capture/Compare 2 Complementary output enable */ +#define TIM_CCER_CC2NP ((uint16_t)0x0080) /*!< Capture/Compare 2 Complementary output Polarity */ +#define TIM_CCER_CC3E ((uint16_t)0x0100) /*!< Capture/Compare 3 output enable */ +#define TIM_CCER_CC3P ((uint16_t)0x0200) /*!< Capture/Compare 3 output Polarity */ +#define TIM_CCER_CC3NE ((uint16_t)0x0400) /*!< Capture/Compare 3 Complementary output enable */ +#define TIM_CCER_CC3NP ((uint16_t)0x0800) /*!< Capture/Compare 3 Complementary output Polarity */ +#define TIM_CCER_CC4E ((uint16_t)0x1000) /*!< Capture/Compare 4 output enable */ +#define TIM_CCER_CC4P ((uint16_t)0x2000) /*!< Capture/Compare 4 output Polarity */ +#define TIM_CCER_CC4NP ((uint16_t)0x8000) /*!< Capture/Compare 4 Complementary output Polarity */ + +/******************* Bit definition for TIM_CNT register ********************/ +#define TIM_CNT_CNT ((uint16_t)0xFFFF) /*!< Counter Value */ + +/******************* Bit definition for TIM_PSC register ********************/ +#define TIM_PSC_PSC ((uint16_t)0xFFFF) /*!< Prescaler Value */ + +/******************* Bit definition for TIM_ARR register ********************/ +#define TIM_ARR_ARR ((uint16_t)0xFFFF) /*!< actual auto-reload Value */ + +/******************* Bit definition for TIM_RCR register ********************/ +#define TIM_RCR_REP ((uint8_t)0xFF) /*!< Repetition Counter Value */ + +/******************* Bit definition for TIM_CCR1 register *******************/ +#define TIM_CCR1_CCR1 ((uint16_t)0xFFFF) /*!< Capture/Compare 1 Value */ + +/******************* Bit definition for TIM_CCR2 register *******************/ +#define TIM_CCR2_CCR2 ((uint16_t)0xFFFF) /*!< Capture/Compare 2 Value */ + +/******************* Bit definition for TIM_CCR3 register *******************/ +#define TIM_CCR3_CCR3 ((uint16_t)0xFFFF) /*!< Capture/Compare 3 Value */ + +/******************* Bit definition for TIM_CCR4 register *******************/ +#define TIM_CCR4_CCR4 ((uint16_t)0xFFFF) /*!< Capture/Compare 4 Value */ + +/******************* Bit definition for TIM_BDTR register *******************/ +#define TIM_BDTR_DTG ((uint16_t)0x00FF) /*!< DTG[0:7] bits (Dead-Time Generator set-up) */ +#define TIM_BDTR_DTG_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_BDTR_DTG_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_BDTR_DTG_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define TIM_BDTR_DTG_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define TIM_BDTR_DTG_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define TIM_BDTR_DTG_5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define TIM_BDTR_DTG_6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define TIM_BDTR_DTG_7 ((uint16_t)0x0080) /*!< Bit 7 */ + +#define TIM_BDTR_LOCK ((uint16_t)0x0300) /*!< LOCK[1:0] bits (Lock Configuration) */ +#define TIM_BDTR_LOCK_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_BDTR_LOCK_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_BDTR_OSSI ((uint16_t)0x0400) /*!< Off-State Selection for Idle mode */ +#define TIM_BDTR_OSSR ((uint16_t)0x0800) /*!< Off-State Selection for Run mode */ +#define TIM_BDTR_BKE ((uint16_t)0x1000) /*!< Break enable */ +#define TIM_BDTR_BKP ((uint16_t)0x2000) /*!< Break Polarity */ +#define TIM_BDTR_AOE ((uint16_t)0x4000) /*!< Automatic Output enable */ +#define TIM_BDTR_MOE ((uint16_t)0x8000) /*!< Main Output enable */ + +/******************* Bit definition for TIM_DCR register ********************/ +#define TIM_DCR_DBA ((uint16_t)0x001F) /*!< DBA[4:0] bits (DMA Base Address) */ +#define TIM_DCR_DBA_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_DCR_DBA_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_DCR_DBA_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define TIM_DCR_DBA_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define TIM_DCR_DBA_4 ((uint16_t)0x0010) /*!< Bit 4 */ + +#define TIM_DCR_DBL ((uint16_t)0x1F00) /*!< DBL[4:0] bits (DMA Burst Length) */ +#define TIM_DCR_DBL_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_DCR_DBL_1 ((uint16_t)0x0200) /*!< Bit 1 */ +#define TIM_DCR_DBL_2 ((uint16_t)0x0400) /*!< Bit 2 */ +#define TIM_DCR_DBL_3 ((uint16_t)0x0800) /*!< Bit 3 */ +#define TIM_DCR_DBL_4 ((uint16_t)0x1000) /*!< Bit 4 */ + +/******************* Bit definition for TIM_DMAR register *******************/ +#define TIM_DMAR_DMAB ((uint16_t)0xFFFF) /*!< DMA register for burst accesses */ + +/******************************************************************************/ +/* */ +/* Real-Time Clock */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for RTC_CRH register ********************/ +#define RTC_CRH_SECIE ((uint8_t)0x01) /*!< Second Interrupt Enable */ +#define RTC_CRH_ALRIE ((uint8_t)0x02) /*!< Alarm Interrupt Enable */ +#define RTC_CRH_OWIE ((uint8_t)0x04) /*!< OverfloW Interrupt Enable */ + +/******************* Bit definition for RTC_CRL register ********************/ +#define RTC_CRL_SECF ((uint8_t)0x01) /*!< Second Flag */ +#define RTC_CRL_ALRF ((uint8_t)0x02) /*!< Alarm Flag */ +#define RTC_CRL_OWF ((uint8_t)0x04) /*!< OverfloW Flag */ +#define RTC_CRL_RSF ((uint8_t)0x08) /*!< Registers Synchronized Flag */ +#define RTC_CRL_CNF ((uint8_t)0x10) /*!< Configuration Flag */ +#define RTC_CRL_RTOFF ((uint8_t)0x20) /*!< RTC operation OFF */ + +/******************* Bit definition for RTC_PRLH register *******************/ +#define RTC_PRLH_PRL ((uint16_t)0x000F) /*!< RTC Prescaler Reload Value High */ + +/******************* Bit definition for RTC_PRLL register *******************/ +#define RTC_PRLL_PRL ((uint16_t)0xFFFF) /*!< RTC Prescaler Reload Value Low */ + +/******************* Bit definition for RTC_DIVH register *******************/ +#define RTC_DIVH_RTC_DIV ((uint16_t)0x000F) /*!< RTC Clock Divider High */ + +/******************* Bit definition for RTC_DIVL register *******************/ +#define RTC_DIVL_RTC_DIV ((uint16_t)0xFFFF) /*!< RTC Clock Divider Low */ + +/******************* Bit definition for RTC_CNTH register *******************/ +#define RTC_CNTH_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter High */ + +/******************* Bit definition for RTC_CNTL register *******************/ +#define RTC_CNTL_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter Low */ + +/******************* Bit definition for RTC_ALRH register *******************/ +#define RTC_ALRH_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm High */ + +/******************* Bit definition for RTC_ALRL register *******************/ +#define RTC_ALRL_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm Low */ + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY ((uint16_t)0xFFFF) /*!< Key value (write only, read 0000h) */ + +/******************* Bit definition for IWDG_PR register ********************/ +#define IWDG_PR_PR ((uint8_t)0x07) /*!< PR[2:0] (Prescaler divider) */ +#define IWDG_PR_PR_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define IWDG_PR_PR_1 ((uint8_t)0x02) /*!< Bit 1 */ +#define IWDG_PR_PR_2 ((uint8_t)0x04) /*!< Bit 2 */ + +/******************* Bit definition for IWDG_RLR register *******************/ +#define IWDG_RLR_RL ((uint16_t)0x0FFF) /*!< Watchdog counter reload value */ + +/******************* Bit definition for IWDG_SR register ********************/ +#define IWDG_SR_PVU ((uint8_t)0x01) /*!< Watchdog prescaler value update */ +#define IWDG_SR_RVU ((uint8_t)0x02) /*!< Watchdog counter reload value update */ + +/******************************************************************************/ +/* */ +/* Window WATCHDOG */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for WWDG_CR register ********************/ +#define WWDG_CR_T ((uint8_t)0x7F) /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */ +#define WWDG_CR_T0 ((uint8_t)0x01) /*!< Bit 0 */ +#define WWDG_CR_T1 ((uint8_t)0x02) /*!< Bit 1 */ +#define WWDG_CR_T2 ((uint8_t)0x04) /*!< Bit 2 */ +#define WWDG_CR_T3 ((uint8_t)0x08) /*!< Bit 3 */ +#define WWDG_CR_T4 ((uint8_t)0x10) /*!< Bit 4 */ +#define WWDG_CR_T5 ((uint8_t)0x20) /*!< Bit 5 */ +#define WWDG_CR_T6 ((uint8_t)0x40) /*!< Bit 6 */ + +#define WWDG_CR_WDGA ((uint8_t)0x80) /*!< Activation bit */ + +/******************* Bit definition for WWDG_CFR register *******************/ +#define WWDG_CFR_W ((uint16_t)0x007F) /*!< W[6:0] bits (7-bit window value) */ +#define WWDG_CFR_W0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define WWDG_CFR_W1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define WWDG_CFR_W2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define WWDG_CFR_W3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define WWDG_CFR_W4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define WWDG_CFR_W5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define WWDG_CFR_W6 ((uint16_t)0x0040) /*!< Bit 6 */ + +#define WWDG_CFR_WDGTB ((uint16_t)0x0180) /*!< WDGTB[1:0] bits (Timer Base) */ +#define WWDG_CFR_WDGTB0 ((uint16_t)0x0080) /*!< Bit 0 */ +#define WWDG_CFR_WDGTB1 ((uint16_t)0x0100) /*!< Bit 1 */ + +#define WWDG_CFR_EWI ((uint16_t)0x0200) /*!< Early Wakeup Interrupt */ + +/******************* Bit definition for WWDG_SR register ********************/ +#define WWDG_SR_EWIF ((uint8_t)0x01) /*!< Early Wakeup Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Flexible Static Memory Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for FSMC_BCR1 register *******************/ +#define FSMC_BCR1_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR1_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR1_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR1_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR1_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR1_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR1_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR1_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR1_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR1_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR1_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR1_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR1_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR1_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR1_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR1_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR1_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR1_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR2 register *******************/ +#define FSMC_BCR2_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR2_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR2_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR2_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR2_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR2_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR2_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR2_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR2_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR2_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR2_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR2_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR2_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR2_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR2_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR2_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR2_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR2_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR3 register *******************/ +#define FSMC_BCR3_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR3_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR3_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR3_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR3_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR3_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR3_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR3_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR3_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR3_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR3_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit. */ +#define FSMC_BCR3_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR3_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR3_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR3_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR3_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR3_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR3_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR4 register *******************/ +#define FSMC_BCR4_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR4_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR4_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR4_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR4_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR4_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR4_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR4_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR4_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR4_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR4_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR4_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR4_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR4_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR4_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR4_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR4_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR4_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BTR1 register ******************/ +#define FSMC_BTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR1_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR1_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR1_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR1_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR1_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BTR2 register *******************/ +#define FSMC_BTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR2_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR2_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR2_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR2_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR2_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/******************* Bit definition for FSMC_BTR3 register *******************/ +#define FSMC_BTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR3_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR3_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR3_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR3_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR3_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BTR4 register *******************/ +#define FSMC_BTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR4_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR4_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR4_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR4_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR4_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR1 register ******************/ +#define FSMC_BWTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR2 register ******************/ +#define FSMC_BWTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1*/ +#define FSMC_BWTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR3 register ******************/ +#define FSMC_BWTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR4 register ******************/ +#define FSMC_BWTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_PCR2 register *******************/ +#define FSMC_PCR2_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR2_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR2_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR2_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR2_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR2_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR2_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR2_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR2_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR2_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR2_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR2_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR2_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR2_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR2_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR2_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR2_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR2_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[1:0] bits (ECC page size) */ +#define FSMC_PCR2_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR2_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR2_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/****************** Bit definition for FSMC_PCR3 register *******************/ +#define FSMC_PCR3_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR3_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR3_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR3_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR3_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR3_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR3_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR3_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR3_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR3_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR3_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR3_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR3_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR3_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR3_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR3_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR3_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR3_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */ +#define FSMC_PCR3_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR3_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR3_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/****************** Bit definition for FSMC_PCR4 register *******************/ +#define FSMC_PCR4_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR4_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR4_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR4_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR4_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR4_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR4_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR4_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR4_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR4_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR4_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR4_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR4_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR4_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR4_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR4_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR4_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR4_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */ +#define FSMC_PCR4_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR4_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR4_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/******************* Bit definition for FSMC_SR2 register *******************/ +#define FSMC_SR2_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR2_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR2_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR2_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR2_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR2_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR2_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/******************* Bit definition for FSMC_SR3 register *******************/ +#define FSMC_SR3_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR3_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR3_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR3_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR3_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR3_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR3_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/******************* Bit definition for FSMC_SR4 register *******************/ +#define FSMC_SR4_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR4_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR4_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR4_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR4_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR4_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR4_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/****************** Bit definition for FSMC_PMEM2 register ******************/ +#define FSMC_PMEM2_MEMSET2 ((uint32_t)0x000000FF) /*!< MEMSET2[7:0] bits (Common memory 2 setup time) */ +#define FSMC_PMEM2_MEMSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMWAIT2 ((uint32_t)0x0000FF00) /*!< MEMWAIT2[7:0] bits (Common memory 2 wait time) */ +#define FSMC_PMEM2_MEMWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMHOLD2 ((uint32_t)0x00FF0000) /*!< MEMHOLD2[7:0] bits (Common memory 2 hold time) */ +#define FSMC_PMEM2_MEMHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMHIZ2 ((uint32_t)0xFF000000) /*!< MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */ +#define FSMC_PMEM2_MEMHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PMEM3 register ******************/ +#define FSMC_PMEM3_MEMSET3 ((uint32_t)0x000000FF) /*!< MEMSET3[7:0] bits (Common memory 3 setup time) */ +#define FSMC_PMEM3_MEMSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMWAIT3 ((uint32_t)0x0000FF00) /*!< MEMWAIT3[7:0] bits (Common memory 3 wait time) */ +#define FSMC_PMEM3_MEMWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMHOLD3 ((uint32_t)0x00FF0000) /*!< MEMHOLD3[7:0] bits (Common memory 3 hold time) */ +#define FSMC_PMEM3_MEMHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMHIZ3 ((uint32_t)0xFF000000) /*!< MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */ +#define FSMC_PMEM3_MEMHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PMEM4 register ******************/ +#define FSMC_PMEM4_MEMSET4 ((uint32_t)0x000000FF) /*!< MEMSET4[7:0] bits (Common memory 4 setup time) */ +#define FSMC_PMEM4_MEMSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMWAIT4 ((uint32_t)0x0000FF00) /*!< MEMWAIT4[7:0] bits (Common memory 4 wait time) */ +#define FSMC_PMEM4_MEMWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMHOLD4 ((uint32_t)0x00FF0000) /*!< MEMHOLD4[7:0] bits (Common memory 4 hold time) */ +#define FSMC_PMEM4_MEMHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMHIZ4 ((uint32_t)0xFF000000) /*!< MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */ +#define FSMC_PMEM4_MEMHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT2 register ******************/ +#define FSMC_PATT2_ATTSET2 ((uint32_t)0x000000FF) /*!< ATTSET2[7:0] bits (Attribute memory 2 setup time) */ +#define FSMC_PATT2_ATTSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT2_ATTSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT2_ATTSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT2_ATTSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT2_ATTSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT2_ATTSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT2_ATTSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT2_ATTSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTWAIT2 ((uint32_t)0x0000FF00) /*!< ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */ +#define FSMC_PATT2_ATTWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT2_ATTWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT2_ATTWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT2_ATTWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT2_ATTWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTHOLD2 ((uint32_t)0x00FF0000) /*!< ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */ +#define FSMC_PATT2_ATTHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT2_ATTHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT2_ATTHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT2_ATTHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT2_ATTHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTHIZ2 ((uint32_t)0xFF000000) /*!< ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */ +#define FSMC_PATT2_ATTHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT2_ATTHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT2_ATTHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT2_ATTHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT2_ATTHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT3 register ******************/ +#define FSMC_PATT3_ATTSET3 ((uint32_t)0x000000FF) /*!< ATTSET3[7:0] bits (Attribute memory 3 setup time) */ +#define FSMC_PATT3_ATTSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT3_ATTSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT3_ATTSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT3_ATTSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT3_ATTSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT3_ATTSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT3_ATTSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT3_ATTSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTWAIT3 ((uint32_t)0x0000FF00) /*!< ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */ +#define FSMC_PATT3_ATTWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT3_ATTWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT3_ATTWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT3_ATTWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT3_ATTWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTHOLD3 ((uint32_t)0x00FF0000) /*!< ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */ +#define FSMC_PATT3_ATTHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT3_ATTHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT3_ATTHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT3_ATTHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT3_ATTHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTHIZ3 ((uint32_t)0xFF000000) /*!< ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */ +#define FSMC_PATT3_ATTHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT3_ATTHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT3_ATTHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT3_ATTHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT3_ATTHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT4 register ******************/ +#define FSMC_PATT4_ATTSET4 ((uint32_t)0x000000FF) /*!< ATTSET4[7:0] bits (Attribute memory 4 setup time) */ +#define FSMC_PATT4_ATTSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT4_ATTSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT4_ATTSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT4_ATTSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT4_ATTSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT4_ATTSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT4_ATTSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT4_ATTSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTWAIT4 ((uint32_t)0x0000FF00) /*!< ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */ +#define FSMC_PATT4_ATTWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT4_ATTWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT4_ATTWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT4_ATTWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT4_ATTWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTHOLD4 ((uint32_t)0x00FF0000) /*!< ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */ +#define FSMC_PATT4_ATTHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT4_ATTHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT4_ATTHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT4_ATTHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT4_ATTHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTHIZ4 ((uint32_t)0xFF000000) /*!< ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */ +#define FSMC_PATT4_ATTHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT4_ATTHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT4_ATTHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT4_ATTHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT4_ATTHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PIO4 register *******************/ +#define FSMC_PIO4_IOSET4 ((uint32_t)0x000000FF) /*!< IOSET4[7:0] bits (I/O 4 setup time) */ +#define FSMC_PIO4_IOSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PIO4_IOSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PIO4_IOSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PIO4_IOSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PIO4_IOSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PIO4_IOSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PIO4_IOSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PIO4_IOSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PIO4_IOWAIT4 ((uint32_t)0x0000FF00) /*!< IOWAIT4[7:0] bits (I/O 4 wait time) */ +#define FSMC_PIO4_IOWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PIO4_IOWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PIO4_IOWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PIO4_IOWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PIO4_IOWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PIO4_IOWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PIO4_IOWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PIO4_IOWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PIO4_IOHOLD4 ((uint32_t)0x00FF0000) /*!< IOHOLD4[7:0] bits (I/O 4 hold time) */ +#define FSMC_PIO4_IOHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PIO4_IOHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PIO4_IOHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PIO4_IOHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PIO4_IOHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PIO4_IOHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PIO4_IOHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PIO4_IOHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PIO4_IOHIZ4 ((uint32_t)0xFF000000) /*!< IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */ +#define FSMC_PIO4_IOHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PIO4_IOHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PIO4_IOHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PIO4_IOHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PIO4_IOHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PIO4_IOHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PIO4_IOHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PIO4_IOHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_ECCR2 register ******************/ +#define FSMC_ECCR2_ECC2 ((uint32_t)0xFFFFFFFF) /*!< ECC result */ + +/****************** Bit definition for FSMC_ECCR3 register ******************/ +#define FSMC_ECCR3_ECC3 ((uint32_t)0xFFFFFFFF) /*!< ECC result */ + +/******************************************************************************/ +/* */ +/* SD host Interface */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for SDIO_POWER register ******************/ +#define SDIO_POWER_PWRCTRL ((uint8_t)0x03) /*!< PWRCTRL[1:0] bits (Power supply control bits) */ +#define SDIO_POWER_PWRCTRL_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define SDIO_POWER_PWRCTRL_1 ((uint8_t)0x02) /*!< Bit 1 */ + +/****************** Bit definition for SDIO_CLKCR register ******************/ +#define SDIO_CLKCR_CLKDIV ((uint16_t)0x00FF) /*!< Clock divide factor */ +#define SDIO_CLKCR_CLKEN ((uint16_t)0x0100) /*!< Clock enable bit */ +#define SDIO_CLKCR_PWRSAV ((uint16_t)0x0200) /*!< Power saving configuration bit */ +#define SDIO_CLKCR_BYPASS ((uint16_t)0x0400) /*!< Clock divider bypass enable bit */ + +#define SDIO_CLKCR_WIDBUS ((uint16_t)0x1800) /*!< WIDBUS[1:0] bits (Wide bus mode enable bit) */ +#define SDIO_CLKCR_WIDBUS_0 ((uint16_t)0x0800) /*!< Bit 0 */ +#define SDIO_CLKCR_WIDBUS_1 ((uint16_t)0x1000) /*!< Bit 1 */ + +#define SDIO_CLKCR_NEGEDGE ((uint16_t)0x2000) /*!< SDIO_CK dephasing selection bit */ +#define SDIO_CLKCR_HWFC_EN ((uint16_t)0x4000) /*!< HW Flow Control enable */ + +/******************* Bit definition for SDIO_ARG register *******************/ +#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!< Command argument */ + +/******************* Bit definition for SDIO_CMD register *******************/ +#define SDIO_CMD_CMDINDEX ((uint16_t)0x003F) /*!< Command Index */ + +#define SDIO_CMD_WAITRESP ((uint16_t)0x00C0) /*!< WAITRESP[1:0] bits (Wait for response bits) */ +#define SDIO_CMD_WAITRESP_0 ((uint16_t)0x0040) /*!< Bit 0 */ +#define SDIO_CMD_WAITRESP_1 ((uint16_t)0x0080) /*!< Bit 1 */ + +#define SDIO_CMD_WAITINT ((uint16_t)0x0100) /*!< CPSM Waits for Interrupt Request */ +#define SDIO_CMD_WAITPEND ((uint16_t)0x0200) /*!< CPSM Waits for ends of data transfer (CmdPend internal signal) */ +#define SDIO_CMD_CPSMEN ((uint16_t)0x0400) /*!< Command path state machine (CPSM) Enable bit */ +#define SDIO_CMD_SDIOSUSPEND ((uint16_t)0x0800) /*!< SD I/O suspend command */ +#define SDIO_CMD_ENCMDCOMPL ((uint16_t)0x1000) /*!< Enable CMD completion */ +#define SDIO_CMD_NIEN ((uint16_t)0x2000) /*!< Not Interrupt Enable */ +#define SDIO_CMD_CEATACMD ((uint16_t)0x4000) /*!< CE-ATA command */ + +/***************** Bit definition for SDIO_RESPCMD register *****************/ +#define SDIO_RESPCMD_RESPCMD ((uint8_t)0x3F) /*!< Response command index */ + +/****************** Bit definition for SDIO_RESP0 register ******************/ +#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP1 register ******************/ +#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP2 register ******************/ +#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP3 register ******************/ +#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP4 register ******************/ +#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_DTIMER register *****************/ +#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!< Data timeout period. */ + +/****************** Bit definition for SDIO_DLEN register *******************/ +#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!< Data length value */ + +/****************** Bit definition for SDIO_DCTRL register ******************/ +#define SDIO_DCTRL_DTEN ((uint16_t)0x0001) /*!< Data transfer enabled bit */ +#define SDIO_DCTRL_DTDIR ((uint16_t)0x0002) /*!< Data transfer direction selection */ +#define SDIO_DCTRL_DTMODE ((uint16_t)0x0004) /*!< Data transfer mode selection */ +#define SDIO_DCTRL_DMAEN ((uint16_t)0x0008) /*!< DMA enabled bit */ + +#define SDIO_DCTRL_DBLOCKSIZE ((uint16_t)0x00F0) /*!< DBLOCKSIZE[3:0] bits (Data block size) */ +#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define SDIO_DCTRL_RWSTART ((uint16_t)0x0100) /*!< Read wait start */ +#define SDIO_DCTRL_RWSTOP ((uint16_t)0x0200) /*!< Read wait stop */ +#define SDIO_DCTRL_RWMOD ((uint16_t)0x0400) /*!< Read wait mode */ +#define SDIO_DCTRL_SDIOEN ((uint16_t)0x0800) /*!< SD I/O enable functions */ + +/****************** Bit definition for SDIO_DCOUNT register *****************/ +#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!< Data count value */ + +/****************** Bit definition for SDIO_STA register ********************/ +#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!< Command response received (CRC check failed) */ +#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!< Data block sent/received (CRC check failed) */ +#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!< Command response timeout */ +#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!< Data timeout */ +#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!< Transmit FIFO underrun error */ +#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!< Received FIFO overrun error */ +#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!< Command response received (CRC check passed) */ +#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!< Command sent (no response required) */ +#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!< Data end (data counter, SDIDCOUNT, is zero) */ +#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!< Start bit not detected on all data signals in wide bus mode */ +#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!< Data block sent/received (CRC check passed) */ +#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!< Command transfer in progress */ +#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!< Data transmit in progress */ +#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!< Data receive in progress */ +#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!< Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */ +#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!< Receive FIFO Half Full: there are at least 8 words in the FIFO */ +#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!< Transmit FIFO full */ +#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!< Receive FIFO full */ +#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!< Transmit FIFO empty */ +#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!< Receive FIFO empty */ +#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!< Data available in transmit FIFO */ +#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!< Data available in receive FIFO */ +#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!< SDIO interrupt received */ +#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received for CMD61 */ + +/******************* Bit definition for SDIO_ICR register *******************/ +#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!< CCRCFAIL flag clear bit */ +#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!< DCRCFAIL flag clear bit */ +#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!< CTIMEOUT flag clear bit */ +#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!< DTIMEOUT flag clear bit */ +#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!< TXUNDERR flag clear bit */ +#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!< RXOVERR flag clear bit */ +#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!< CMDREND flag clear bit */ +#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!< CMDSENT flag clear bit */ +#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!< DATAEND flag clear bit */ +#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!< STBITERR flag clear bit */ +#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!< DBCKEND flag clear bit */ +#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!< SDIOIT flag clear bit */ +#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!< CEATAEND flag clear bit */ + +/****************** Bit definition for SDIO_MASK register *******************/ +#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!< Command CRC Fail Interrupt Enable */ +#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!< Data CRC Fail Interrupt Enable */ +#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!< Command TimeOut Interrupt Enable */ +#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!< Data TimeOut Interrupt Enable */ +#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!< Tx FIFO UnderRun Error Interrupt Enable */ +#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!< Rx FIFO OverRun Error Interrupt Enable */ +#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!< Command Response Received Interrupt Enable */ +#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!< Command Sent Interrupt Enable */ +#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!< Data End Interrupt Enable */ +#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!< Start Bit Error Interrupt Enable */ +#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!< Data Block End Interrupt Enable */ +#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!< Command Acting Interrupt Enable */ +#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!< Data Transmit Acting Interrupt Enable */ +#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!< Data receive acting interrupt enabled */ +#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!< Tx FIFO Half Empty interrupt Enable */ +#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!< Rx FIFO Half Full interrupt Enable */ +#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!< Tx FIFO Full interrupt Enable */ +#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!< Rx FIFO Full interrupt Enable */ +#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!< Tx FIFO Empty interrupt Enable */ +#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!< Rx FIFO Empty interrupt Enable */ +#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!< Data available in Tx FIFO interrupt Enable */ +#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!< Data available in Rx FIFO interrupt Enable */ +#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!< SDIO Mode Interrupt Received interrupt Enable */ +#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received Interrupt Enable */ + +/***************** Bit definition for SDIO_FIFOCNT register *****************/ +#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!< Remaining number of words to be written to or read from the FIFO */ + +/****************** Bit definition for SDIO_FIFO register *******************/ +#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!< Receive and transmit FIFO data */ + +/******************************************************************************/ +/* */ +/* USB Device FS */ +/* */ +/******************************************************************************/ + +/*!< Endpoint-specific registers */ +/******************* Bit definition for USB_EP0R register *******************/ +#define USB_EP0R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP0R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP0R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP0R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP0R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP0R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP0R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP0R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP0R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP0R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP0R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP0R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP0R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP0R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP0R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP0R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP1R register *******************/ +#define USB_EP1R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP1R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP1R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP1R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP1R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP1R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP1R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP1R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP1R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP1R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP1R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP1R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP1R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP1R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP1R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP1R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP2R register *******************/ +#define USB_EP2R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP2R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP2R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP2R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP2R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP2R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP2R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP2R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP2R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP2R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP2R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP2R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP2R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP2R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP2R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP2R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP3R register *******************/ +#define USB_EP3R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP3R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP3R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP3R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP3R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP3R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP3R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP3R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP3R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP3R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP3R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP3R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP3R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP3R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP3R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP3R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP4R register *******************/ +#define USB_EP4R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP4R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP4R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP4R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP4R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP4R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP4R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP4R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP4R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP4R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP4R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP4R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP4R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP4R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP4R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP4R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP5R register *******************/ +#define USB_EP5R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP5R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP5R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP5R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP5R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP5R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP5R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP5R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP5R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP5R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP5R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP5R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP5R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP5R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP5R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP5R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP6R register *******************/ +#define USB_EP6R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP6R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP6R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP6R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP6R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP6R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP6R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP6R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP6R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP6R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP6R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP6R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP6R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP6R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP6R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP6R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP7R register *******************/ +#define USB_EP7R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP7R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP7R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP7R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP7R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP7R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP7R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP7R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP7R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP7R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP7R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP7R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP7R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP7R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP7R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP7R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/*!< Common registers */ +/******************* Bit definition for USB_CNTR register *******************/ +#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB Reset */ +#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power down */ +#define USB_CNTR_LP_MODE ((uint16_t)0x0004) /*!< Low-power mode */ +#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force suspend */ +#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< Resume request */ +#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Interrupt Mask */ +#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Interrupt Mask */ +#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Interrupt Mask */ +#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< Suspend mode Interrupt Mask */ +#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< Wakeup Interrupt Mask */ +#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< Error Interrupt Mask */ +#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun Interrupt Mask */ +#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct Transfer Interrupt Mask */ + +/******************* Bit definition for USB_ISTR register *******************/ +#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< Endpoint Identifier */ +#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< Direction of transaction */ +#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame */ +#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame */ +#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< USB RESET request */ +#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< Suspend mode request */ +#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< Wake up */ +#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< Error */ +#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun */ +#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct Transfer */ + +/******************* Bit definition for USB_FNR register ********************/ +#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */ +#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */ +#define USB_FNR_LCK ((uint16_t)0x2000) /*!< Locked */ +#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< Receive Data - Line Status */ +#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< Receive Data + Line Status */ + +/****************** Bit definition for USB_DADDR register *******************/ +#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< ADD[6:0] bits (Device Address) */ +#define USB_DADDR_ADD0 ((uint8_t)0x01) /*!< Bit 0 */ +#define USB_DADDR_ADD1 ((uint8_t)0x02) /*!< Bit 1 */ +#define USB_DADDR_ADD2 ((uint8_t)0x04) /*!< Bit 2 */ +#define USB_DADDR_ADD3 ((uint8_t)0x08) /*!< Bit 3 */ +#define USB_DADDR_ADD4 ((uint8_t)0x10) /*!< Bit 4 */ +#define USB_DADDR_ADD5 ((uint8_t)0x20) /*!< Bit 5 */ +#define USB_DADDR_ADD6 ((uint8_t)0x40) /*!< Bit 6 */ + +#define USB_DADDR_EF ((uint8_t)0x80) /*!< Enable Function */ + +/****************** Bit definition for USB_BTABLE register ******************/ +#define USB_BTABLE_BTABLE ((uint16_t)0xFFF8) /*!< Buffer Table */ + +/*!< Buffer descriptor table */ +/***************** Bit definition for USB_ADDR0_TX register *****************/ +#define USB_ADDR0_TX_ADDR0_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 0 */ + +/***************** Bit definition for USB_ADDR1_TX register *****************/ +#define USB_ADDR1_TX_ADDR1_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 1 */ + +/***************** Bit definition for USB_ADDR2_TX register *****************/ +#define USB_ADDR2_TX_ADDR2_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 2 */ + +/***************** Bit definition for USB_ADDR3_TX register *****************/ +#define USB_ADDR3_TX_ADDR3_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 3 */ + +/***************** Bit definition for USB_ADDR4_TX register *****************/ +#define USB_ADDR4_TX_ADDR4_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 4 */ + +/***************** Bit definition for USB_ADDR5_TX register *****************/ +#define USB_ADDR5_TX_ADDR5_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 5 */ + +/***************** Bit definition for USB_ADDR6_TX register *****************/ +#define USB_ADDR6_TX_ADDR6_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 6 */ + +/***************** Bit definition for USB_ADDR7_TX register *****************/ +#define USB_ADDR7_TX_ADDR7_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 7 */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_COUNT0_TX register ****************/ +#define USB_COUNT0_TX_COUNT0_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 0 */ + +/***************** Bit definition for USB_COUNT1_TX register ****************/ +#define USB_COUNT1_TX_COUNT1_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 1 */ + +/***************** Bit definition for USB_COUNT2_TX register ****************/ +#define USB_COUNT2_TX_COUNT2_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 2 */ + +/***************** Bit definition for USB_COUNT3_TX register ****************/ +#define USB_COUNT3_TX_COUNT3_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 3 */ + +/***************** Bit definition for USB_COUNT4_TX register ****************/ +#define USB_COUNT4_TX_COUNT4_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 4 */ + +/***************** Bit definition for USB_COUNT5_TX register ****************/ +#define USB_COUNT5_TX_COUNT5_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 5 */ + +/***************** Bit definition for USB_COUNT6_TX register ****************/ +#define USB_COUNT6_TX_COUNT6_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 6 */ + +/***************** Bit definition for USB_COUNT7_TX register ****************/ +#define USB_COUNT7_TX_COUNT7_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 7 */ + +/*----------------------------------------------------------------------------*/ + +/**************** Bit definition for USB_COUNT0_TX_0 register ***************/ +#define USB_COUNT0_TX_0_COUNT0_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 (low) */ + +/**************** Bit definition for USB_COUNT0_TX_1 register ***************/ +#define USB_COUNT0_TX_1_COUNT0_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 0 (high) */ + +/**************** Bit definition for USB_COUNT1_TX_0 register ***************/ +#define USB_COUNT1_TX_0_COUNT1_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 (low) */ + +/**************** Bit definition for USB_COUNT1_TX_1 register ***************/ +#define USB_COUNT1_TX_1_COUNT1_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 1 (high) */ + +/**************** Bit definition for USB_COUNT2_TX_0 register ***************/ +#define USB_COUNT2_TX_0_COUNT2_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 (low) */ + +/**************** Bit definition for USB_COUNT2_TX_1 register ***************/ +#define USB_COUNT2_TX_1_COUNT2_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 2 (high) */ + +/**************** Bit definition for USB_COUNT3_TX_0 register ***************/ +#define USB_COUNT3_TX_0_COUNT3_TX_0 ((uint16_t)0x000003FF) /*!< Transmission Byte Count 3 (low) */ + +/**************** Bit definition for USB_COUNT3_TX_1 register ***************/ +#define USB_COUNT3_TX_1_COUNT3_TX_1 ((uint16_t)0x03FF0000) /*!< Transmission Byte Count 3 (high) */ + +/**************** Bit definition for USB_COUNT4_TX_0 register ***************/ +#define USB_COUNT4_TX_0_COUNT4_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 (low) */ + +/**************** Bit definition for USB_COUNT4_TX_1 register ***************/ +#define USB_COUNT4_TX_1_COUNT4_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 4 (high) */ + +/**************** Bit definition for USB_COUNT5_TX_0 register ***************/ +#define USB_COUNT5_TX_0_COUNT5_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 (low) */ + +/**************** Bit definition for USB_COUNT5_TX_1 register ***************/ +#define USB_COUNT5_TX_1_COUNT5_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 5 (high) */ + +/**************** Bit definition for USB_COUNT6_TX_0 register ***************/ +#define USB_COUNT6_TX_0_COUNT6_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 (low) */ + +/**************** Bit definition for USB_COUNT6_TX_1 register ***************/ +#define USB_COUNT6_TX_1_COUNT6_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 6 (high) */ + +/**************** Bit definition for USB_COUNT7_TX_0 register ***************/ +#define USB_COUNT7_TX_0_COUNT7_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 (low) */ + +/**************** Bit definition for USB_COUNT7_TX_1 register ***************/ +#define USB_COUNT7_TX_1_COUNT7_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 7 (high) */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_ADDR0_RX register *****************/ +#define USB_ADDR0_RX_ADDR0_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 0 */ + +/***************** Bit definition for USB_ADDR1_RX register *****************/ +#define USB_ADDR1_RX_ADDR1_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 1 */ + +/***************** Bit definition for USB_ADDR2_RX register *****************/ +#define USB_ADDR2_RX_ADDR2_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 2 */ + +/***************** Bit definition for USB_ADDR3_RX register *****************/ +#define USB_ADDR3_RX_ADDR3_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 3 */ + +/***************** Bit definition for USB_ADDR4_RX register *****************/ +#define USB_ADDR4_RX_ADDR4_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 4 */ + +/***************** Bit definition for USB_ADDR5_RX register *****************/ +#define USB_ADDR5_RX_ADDR5_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 5 */ + +/***************** Bit definition for USB_ADDR6_RX register *****************/ +#define USB_ADDR6_RX_ADDR6_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 6 */ + +/***************** Bit definition for USB_ADDR7_RX register *****************/ +#define USB_ADDR7_RX_ADDR7_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 7 */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_COUNT0_RX register ****************/ +#define USB_COUNT0_RX_COUNT0_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT0_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT0_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT0_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT0_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT0_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT0_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT1_RX register ****************/ +#define USB_COUNT1_RX_COUNT1_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT1_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT1_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT1_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT1_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT1_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT1_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT2_RX register ****************/ +#define USB_COUNT2_RX_COUNT2_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT2_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT2_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT2_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT2_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT2_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT2_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT3_RX register ****************/ +#define USB_COUNT3_RX_COUNT3_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT3_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT3_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT3_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT3_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT3_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT3_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT4_RX register ****************/ +#define USB_COUNT4_RX_COUNT4_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT4_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT4_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT4_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT4_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT4_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT4_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT5_RX register ****************/ +#define USB_COUNT5_RX_COUNT5_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT5_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT5_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT5_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT5_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT5_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT5_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT6_RX register ****************/ +#define USB_COUNT6_RX_COUNT6_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT6_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT6_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT6_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT6_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT6_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT6_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT7_RX register ****************/ +#define USB_COUNT7_RX_COUNT7_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT7_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT7_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT7_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT7_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT7_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT7_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/*----------------------------------------------------------------------------*/ + +/**************** Bit definition for USB_COUNT0_RX_0 register ***************/ +#define USB_COUNT0_RX_0_COUNT0_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT0_RX_1 register ***************/ +#define USB_COUNT0_RX_1_COUNT0_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT1_RX_0 register ***************/ +#define USB_COUNT1_RX_0_COUNT1_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT1_RX_1 register ***************/ +#define USB_COUNT1_RX_1_COUNT1_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT2_RX_0 register ***************/ +#define USB_COUNT2_RX_0_COUNT2_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT2_RX_1 register ***************/ +#define USB_COUNT2_RX_1_COUNT2_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT3_RX_0 register ***************/ +#define USB_COUNT3_RX_0_COUNT3_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT3_RX_1 register ***************/ +#define USB_COUNT3_RX_1_COUNT3_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT4_RX_0 register ***************/ +#define USB_COUNT4_RX_0_COUNT4_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT4_RX_1 register ***************/ +#define USB_COUNT4_RX_1_COUNT4_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT5_RX_0 register ***************/ +#define USB_COUNT5_RX_0_COUNT5_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT5_RX_1 register ***************/ +#define USB_COUNT5_RX_1_COUNT5_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/*************** Bit definition for USB_COUNT6_RX_0 register ***************/ +#define USB_COUNT6_RX_0_COUNT6_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT6_RX_1 register ***************/ +#define USB_COUNT6_RX_1_COUNT6_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/*************** Bit definition for USB_COUNT7_RX_0 register ****************/ +#define USB_COUNT7_RX_0_COUNT7_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/*************** Bit definition for USB_COUNT7_RX_1 register ****************/ +#define USB_COUNT7_RX_1_COUNT7_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/******************************************************************************/ +/* */ +/* Controller Area Network */ +/* */ +/******************************************************************************/ + +/*!< CAN control and status registers */ +/******************* Bit definition for CAN_MCR register ********************/ +#define CAN_MCR_INRQ ((uint16_t)0x0001) /*!< Initialization Request */ +#define CAN_MCR_SLEEP ((uint16_t)0x0002) /*!< Sleep Mode Request */ +#define CAN_MCR_TXFP ((uint16_t)0x0004) /*!< Transmit FIFO Priority */ +#define CAN_MCR_RFLM ((uint16_t)0x0008) /*!< Receive FIFO Locked Mode */ +#define CAN_MCR_NART ((uint16_t)0x0010) /*!< No Automatic Retransmission */ +#define CAN_MCR_AWUM ((uint16_t)0x0020) /*!< Automatic Wakeup Mode */ +#define CAN_MCR_ABOM ((uint16_t)0x0040) /*!< Automatic Bus-Off Management */ +#define CAN_MCR_TTCM ((uint16_t)0x0080) /*!< Time Triggered Communication Mode */ +#define CAN_MCR_RESET ((uint16_t)0x8000) /*!< CAN software master reset */ + +/******************* Bit definition for CAN_MSR register ********************/ +#define CAN_MSR_INAK ((uint16_t)0x0001) /*!< Initialization Acknowledge */ +#define CAN_MSR_SLAK ((uint16_t)0x0002) /*!< Sleep Acknowledge */ +#define CAN_MSR_ERRI ((uint16_t)0x0004) /*!< Error Interrupt */ +#define CAN_MSR_WKUI ((uint16_t)0x0008) /*!< Wakeup Interrupt */ +#define CAN_MSR_SLAKI ((uint16_t)0x0010) /*!< Sleep Acknowledge Interrupt */ +#define CAN_MSR_TXM ((uint16_t)0x0100) /*!< Transmit Mode */ +#define CAN_MSR_RXM ((uint16_t)0x0200) /*!< Receive Mode */ +#define CAN_MSR_SAMP ((uint16_t)0x0400) /*!< Last Sample Point */ +#define CAN_MSR_RX ((uint16_t)0x0800) /*!< CAN Rx Signal */ + +/******************* Bit definition for CAN_TSR register ********************/ +#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!< Request Completed Mailbox0 */ +#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!< Transmission OK of Mailbox0 */ +#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!< Arbitration Lost for Mailbox0 */ +#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!< Transmission Error of Mailbox0 */ +#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!< Abort Request for Mailbox0 */ +#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!< Request Completed Mailbox1 */ +#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!< Transmission OK of Mailbox1 */ +#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!< Arbitration Lost for Mailbox1 */ +#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!< Transmission Error of Mailbox1 */ +#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!< Abort Request for Mailbox 1 */ +#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!< Request Completed Mailbox2 */ +#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!< Transmission OK of Mailbox 2 */ +#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!< Arbitration Lost for mailbox 2 */ +#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!< Transmission Error of Mailbox 2 */ +#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!< Abort Request for Mailbox 2 */ +#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!< Mailbox Code */ + +#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!< TME[2:0] bits */ +#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!< Transmit Mailbox 0 Empty */ +#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!< Transmit Mailbox 1 Empty */ +#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!< Transmit Mailbox 2 Empty */ + +#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!< LOW[2:0] bits */ +#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!< Lowest Priority Flag for Mailbox 0 */ +#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!< Lowest Priority Flag for Mailbox 1 */ +#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!< Lowest Priority Flag for Mailbox 2 */ + +/******************* Bit definition for CAN_RF0R register *******************/ +#define CAN_RF0R_FMP0 ((uint8_t)0x03) /*!< FIFO 0 Message Pending */ +#define CAN_RF0R_FULL0 ((uint8_t)0x08) /*!< FIFO 0 Full */ +#define CAN_RF0R_FOVR0 ((uint8_t)0x10) /*!< FIFO 0 Overrun */ +#define CAN_RF0R_RFOM0 ((uint8_t)0x20) /*!< Release FIFO 0 Output Mailbox */ + +/******************* Bit definition for CAN_RF1R register *******************/ +#define CAN_RF1R_FMP1 ((uint8_t)0x03) /*!< FIFO 1 Message Pending */ +#define CAN_RF1R_FULL1 ((uint8_t)0x08) /*!< FIFO 1 Full */ +#define CAN_RF1R_FOVR1 ((uint8_t)0x10) /*!< FIFO 1 Overrun */ +#define CAN_RF1R_RFOM1 ((uint8_t)0x20) /*!< Release FIFO 1 Output Mailbox */ + +/******************** Bit definition for CAN_IER register *******************/ +#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!< Transmit Mailbox Empty Interrupt Enable */ +#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!< FIFO Message Pending Interrupt Enable */ +#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!< FIFO Full Interrupt Enable */ +#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!< FIFO Overrun Interrupt Enable */ +#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!< FIFO Message Pending Interrupt Enable */ +#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!< FIFO Full Interrupt Enable */ +#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!< FIFO Overrun Interrupt Enable */ +#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!< Error Warning Interrupt Enable */ +#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!< Error Passive Interrupt Enable */ +#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!< Bus-Off Interrupt Enable */ +#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!< Last Error Code Interrupt Enable */ +#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!< Error Interrupt Enable */ +#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!< Wakeup Interrupt Enable */ +#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!< Sleep Interrupt Enable */ + +/******************** Bit definition for CAN_ESR register *******************/ +#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!< Error Warning Flag */ +#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!< Error Passive Flag */ +#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!< Bus-Off Flag */ + +#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!< LEC[2:0] bits (Last Error Code) */ +#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + +#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!< Least significant byte of the 9-bit Transmit Error Counter */ +#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!< Receive Error Counter */ + +/******************* Bit definition for CAN_BTR register ********************/ +#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!< Baud Rate Prescaler */ +#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!< Time Segment 1 */ +#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!< Time Segment 2 */ +#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!< Resynchronization Jump Width */ +#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!< Loop Back Mode (Debug) */ +#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!< Silent Mode */ + +/*!< Mailbox registers */ +/****************** Bit definition for CAN_TI0R register ********************/ +#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/****************** Bit definition for CAN_TDT0R register *******************/ +#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/****************** Bit definition for CAN_TDL0R register *******************/ +#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/****************** Bit definition for CAN_TDH0R register *******************/ +#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_TI1R register *******************/ +#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_TDT1R register ******************/ +#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_TDL1R register ******************/ +#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_TDH1R register ******************/ +#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_TI2R register *******************/ +#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */ +#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_TDT2R register ******************/ +#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_TDL2R register ******************/ +#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_TDH2R register ******************/ +#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_RI0R register *******************/ +#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_RDT0R register ******************/ +#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */ +#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_RDL0R register ******************/ +#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_RDH0R register ******************/ +#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_RI1R register *******************/ +#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */ +#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_RDT1R register ******************/ +#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */ +#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_RDL1R register ******************/ +#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_RDH1R register ******************/ +#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/*!< CAN filter registers */ +/******************* Bit definition for CAN_FMR register ********************/ +#define CAN_FMR_FINIT ((uint8_t)0x01) /*!< Filter Init Mode */ + +/******************* Bit definition for CAN_FM1R register *******************/ +#define CAN_FM1R_FBM ((uint16_t)0x3FFF) /*!< Filter Mode */ +#define CAN_FM1R_FBM0 ((uint16_t)0x0001) /*!< Filter Init Mode bit 0 */ +#define CAN_FM1R_FBM1 ((uint16_t)0x0002) /*!< Filter Init Mode bit 1 */ +#define CAN_FM1R_FBM2 ((uint16_t)0x0004) /*!< Filter Init Mode bit 2 */ +#define CAN_FM1R_FBM3 ((uint16_t)0x0008) /*!< Filter Init Mode bit 3 */ +#define CAN_FM1R_FBM4 ((uint16_t)0x0010) /*!< Filter Init Mode bit 4 */ +#define CAN_FM1R_FBM5 ((uint16_t)0x0020) /*!< Filter Init Mode bit 5 */ +#define CAN_FM1R_FBM6 ((uint16_t)0x0040) /*!< Filter Init Mode bit 6 */ +#define CAN_FM1R_FBM7 ((uint16_t)0x0080) /*!< Filter Init Mode bit 7 */ +#define CAN_FM1R_FBM8 ((uint16_t)0x0100) /*!< Filter Init Mode bit 8 */ +#define CAN_FM1R_FBM9 ((uint16_t)0x0200) /*!< Filter Init Mode bit 9 */ +#define CAN_FM1R_FBM10 ((uint16_t)0x0400) /*!< Filter Init Mode bit 10 */ +#define CAN_FM1R_FBM11 ((uint16_t)0x0800) /*!< Filter Init Mode bit 11 */ +#define CAN_FM1R_FBM12 ((uint16_t)0x1000) /*!< Filter Init Mode bit 12 */ +#define CAN_FM1R_FBM13 ((uint16_t)0x2000) /*!< Filter Init Mode bit 13 */ + +/******************* Bit definition for CAN_FS1R register *******************/ +#define CAN_FS1R_FSC ((uint16_t)0x3FFF) /*!< Filter Scale Configuration */ +#define CAN_FS1R_FSC0 ((uint16_t)0x0001) /*!< Filter Scale Configuration bit 0 */ +#define CAN_FS1R_FSC1 ((uint16_t)0x0002) /*!< Filter Scale Configuration bit 1 */ +#define CAN_FS1R_FSC2 ((uint16_t)0x0004) /*!< Filter Scale Configuration bit 2 */ +#define CAN_FS1R_FSC3 ((uint16_t)0x0008) /*!< Filter Scale Configuration bit 3 */ +#define CAN_FS1R_FSC4 ((uint16_t)0x0010) /*!< Filter Scale Configuration bit 4 */ +#define CAN_FS1R_FSC5 ((uint16_t)0x0020) /*!< Filter Scale Configuration bit 5 */ +#define CAN_FS1R_FSC6 ((uint16_t)0x0040) /*!< Filter Scale Configuration bit 6 */ +#define CAN_FS1R_FSC7 ((uint16_t)0x0080) /*!< Filter Scale Configuration bit 7 */ +#define CAN_FS1R_FSC8 ((uint16_t)0x0100) /*!< Filter Scale Configuration bit 8 */ +#define CAN_FS1R_FSC9 ((uint16_t)0x0200) /*!< Filter Scale Configuration bit 9 */ +#define CAN_FS1R_FSC10 ((uint16_t)0x0400) /*!< Filter Scale Configuration bit 10 */ +#define CAN_FS1R_FSC11 ((uint16_t)0x0800) /*!< Filter Scale Configuration bit 11 */ +#define CAN_FS1R_FSC12 ((uint16_t)0x1000) /*!< Filter Scale Configuration bit 12 */ +#define CAN_FS1R_FSC13 ((uint16_t)0x2000) /*!< Filter Scale Configuration bit 13 */ + +/****************** Bit definition for CAN_FFA1R register *******************/ +#define CAN_FFA1R_FFA ((uint16_t)0x3FFF) /*!< Filter FIFO Assignment */ +#define CAN_FFA1R_FFA0 ((uint16_t)0x0001) /*!< Filter FIFO Assignment for Filter 0 */ +#define CAN_FFA1R_FFA1 ((uint16_t)0x0002) /*!< Filter FIFO Assignment for Filter 1 */ +#define CAN_FFA1R_FFA2 ((uint16_t)0x0004) /*!< Filter FIFO Assignment for Filter 2 */ +#define CAN_FFA1R_FFA3 ((uint16_t)0x0008) /*!< Filter FIFO Assignment for Filter 3 */ +#define CAN_FFA1R_FFA4 ((uint16_t)0x0010) /*!< Filter FIFO Assignment for Filter 4 */ +#define CAN_FFA1R_FFA5 ((uint16_t)0x0020) /*!< Filter FIFO Assignment for Filter 5 */ +#define CAN_FFA1R_FFA6 ((uint16_t)0x0040) /*!< Filter FIFO Assignment for Filter 6 */ +#define CAN_FFA1R_FFA7 ((uint16_t)0x0080) /*!< Filter FIFO Assignment for Filter 7 */ +#define CAN_FFA1R_FFA8 ((uint16_t)0x0100) /*!< Filter FIFO Assignment for Filter 8 */ +#define CAN_FFA1R_FFA9 ((uint16_t)0x0200) /*!< Filter FIFO Assignment for Filter 9 */ +#define CAN_FFA1R_FFA10 ((uint16_t)0x0400) /*!< Filter FIFO Assignment for Filter 10 */ +#define CAN_FFA1R_FFA11 ((uint16_t)0x0800) /*!< Filter FIFO Assignment for Filter 11 */ +#define CAN_FFA1R_FFA12 ((uint16_t)0x1000) /*!< Filter FIFO Assignment for Filter 12 */ +#define CAN_FFA1R_FFA13 ((uint16_t)0x2000) /*!< Filter FIFO Assignment for Filter 13 */ + +/******************* Bit definition for CAN_FA1R register *******************/ +#define CAN_FA1R_FACT ((uint16_t)0x3FFF) /*!< Filter Active */ +#define CAN_FA1R_FACT0 ((uint16_t)0x0001) /*!< Filter 0 Active */ +#define CAN_FA1R_FACT1 ((uint16_t)0x0002) /*!< Filter 1 Active */ +#define CAN_FA1R_FACT2 ((uint16_t)0x0004) /*!< Filter 2 Active */ +#define CAN_FA1R_FACT3 ((uint16_t)0x0008) /*!< Filter 3 Active */ +#define CAN_FA1R_FACT4 ((uint16_t)0x0010) /*!< Filter 4 Active */ +#define CAN_FA1R_FACT5 ((uint16_t)0x0020) /*!< Filter 5 Active */ +#define CAN_FA1R_FACT6 ((uint16_t)0x0040) /*!< Filter 6 Active */ +#define CAN_FA1R_FACT7 ((uint16_t)0x0080) /*!< Filter 7 Active */ +#define CAN_FA1R_FACT8 ((uint16_t)0x0100) /*!< Filter 8 Active */ +#define CAN_FA1R_FACT9 ((uint16_t)0x0200) /*!< Filter 9 Active */ +#define CAN_FA1R_FACT10 ((uint16_t)0x0400) /*!< Filter 10 Active */ +#define CAN_FA1R_FACT11 ((uint16_t)0x0800) /*!< Filter 11 Active */ +#define CAN_FA1R_FACT12 ((uint16_t)0x1000) /*!< Filter 12 Active */ +#define CAN_FA1R_FACT13 ((uint16_t)0x2000) /*!< Filter 13 Active */ + +/******************* Bit definition for CAN_F0R1 register *******************/ +#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F1R1 register *******************/ +#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F2R1 register *******************/ +#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F3R1 register *******************/ +#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F4R1 register *******************/ +#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F5R1 register *******************/ +#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F6R1 register *******************/ +#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F7R1 register *******************/ +#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F8R1 register *******************/ +#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F9R1 register *******************/ +#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F10R1 register ******************/ +#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F11R1 register ******************/ +#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F12R1 register ******************/ +#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F13R1 register ******************/ +#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F0R2 register *******************/ +#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F1R2 register *******************/ +#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F2R2 register *******************/ +#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F3R2 register *******************/ +#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F4R2 register *******************/ +#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F5R2 register *******************/ +#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F6R2 register *******************/ +#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F7R2 register *******************/ +#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F8R2 register *******************/ +#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F9R2 register *******************/ +#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F10R2 register ******************/ +#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F11R2 register ******************/ +#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F12R2 register ******************/ +#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F13R2 register ******************/ +#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA ((uint16_t)0x0001) /*!< Clock Phase */ +#define SPI_CR1_CPOL ((uint16_t)0x0002) /*!< Clock Polarity */ +#define SPI_CR1_MSTR ((uint16_t)0x0004) /*!< Master Selection */ + +#define SPI_CR1_BR ((uint16_t)0x0038) /*!< BR[2:0] bits (Baud Rate Control) */ +#define SPI_CR1_BR_0 ((uint16_t)0x0008) /*!< Bit 0 */ +#define SPI_CR1_BR_1 ((uint16_t)0x0010) /*!< Bit 1 */ +#define SPI_CR1_BR_2 ((uint16_t)0x0020) /*!< Bit 2 */ + +#define SPI_CR1_SPE ((uint16_t)0x0040) /*!< SPI Enable */ +#define SPI_CR1_LSBFIRST ((uint16_t)0x0080) /*!< Frame Format */ +#define SPI_CR1_SSI ((uint16_t)0x0100) /*!< Internal slave select */ +#define SPI_CR1_SSM ((uint16_t)0x0200) /*!< Software slave management */ +#define SPI_CR1_RXONLY ((uint16_t)0x0400) /*!< Receive only */ +#define SPI_CR1_DFF ((uint16_t)0x0800) /*!< Data Frame Format */ +#define SPI_CR1_CRCNEXT ((uint16_t)0x1000) /*!< Transmit CRC next */ +#define SPI_CR1_CRCEN ((uint16_t)0x2000) /*!< Hardware CRC calculation enable */ +#define SPI_CR1_BIDIOE ((uint16_t)0x4000) /*!< Output enable in bidirectional mode */ +#define SPI_CR1_BIDIMODE ((uint16_t)0x8000) /*!< Bidirectional data mode enable */ + +/******************* Bit definition for SPI_CR2 register ********************/ +#define SPI_CR2_RXDMAEN ((uint8_t)0x01) /*!< Rx Buffer DMA Enable */ +#define SPI_CR2_TXDMAEN ((uint8_t)0x02) /*!< Tx Buffer DMA Enable */ +#define SPI_CR2_SSOE ((uint8_t)0x04) /*!< SS Output Enable */ +#define SPI_CR2_ERRIE ((uint8_t)0x20) /*!< Error Interrupt Enable */ +#define SPI_CR2_RXNEIE ((uint8_t)0x40) /*!< RX buffer Not Empty Interrupt Enable */ +#define SPI_CR2_TXEIE ((uint8_t)0x80) /*!< Tx buffer Empty Interrupt Enable */ + +/******************** Bit definition for SPI_SR register ********************/ +#define SPI_SR_RXNE ((uint8_t)0x01) /*!< Receive buffer Not Empty */ +#define SPI_SR_TXE ((uint8_t)0x02) /*!< Transmit buffer Empty */ +#define SPI_SR_CHSIDE ((uint8_t)0x04) /*!< Channel side */ +#define SPI_SR_UDR ((uint8_t)0x08) /*!< Underrun flag */ +#define SPI_SR_CRCERR ((uint8_t)0x10) /*!< CRC Error flag */ +#define SPI_SR_MODF ((uint8_t)0x20) /*!< Mode fault */ +#define SPI_SR_OVR ((uint8_t)0x40) /*!< Overrun flag */ +#define SPI_SR_BSY ((uint8_t)0x80) /*!< Busy flag */ + +/******************** Bit definition for SPI_DR register ********************/ +#define SPI_DR_DR ((uint16_t)0xFFFF) /*!< Data Register */ + +/******************* Bit definition for SPI_CRCPR register ******************/ +#define SPI_CRCPR_CRCPOLY ((uint16_t)0xFFFF) /*!< CRC polynomial register */ + +/****************** Bit definition for SPI_RXCRCR register ******************/ +#define SPI_RXCRCR_RXCRC ((uint16_t)0xFFFF) /*!< Rx CRC Register */ + +/****************** Bit definition for SPI_TXCRCR register ******************/ +#define SPI_TXCRCR_TXCRC ((uint16_t)0xFFFF) /*!< Tx CRC Register */ + +/****************** Bit definition for SPI_I2SCFGR register *****************/ +#define SPI_I2SCFGR_CHLEN ((uint16_t)0x0001) /*!< Channel length (number of bits per audio channel) */ + +#define SPI_I2SCFGR_DATLEN ((uint16_t)0x0006) /*!< DATLEN[1:0] bits (Data length to be transferred) */ +#define SPI_I2SCFGR_DATLEN_0 ((uint16_t)0x0002) /*!< Bit 0 */ +#define SPI_I2SCFGR_DATLEN_1 ((uint16_t)0x0004) /*!< Bit 1 */ + +#define SPI_I2SCFGR_CKPOL ((uint16_t)0x0008) /*!< steady state clock polarity */ + +#define SPI_I2SCFGR_I2SSTD ((uint16_t)0x0030) /*!< I2SSTD[1:0] bits (I2S standard selection) */ +#define SPI_I2SCFGR_I2SSTD_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define SPI_I2SCFGR_I2SSTD_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define SPI_I2SCFGR_PCMSYNC ((uint16_t)0x0080) /*!< PCM frame synchronization */ + +#define SPI_I2SCFGR_I2SCFG ((uint16_t)0x0300) /*!< I2SCFG[1:0] bits (I2S configuration mode) */ +#define SPI_I2SCFGR_I2SCFG_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define SPI_I2SCFGR_I2SCFG_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define SPI_I2SCFGR_I2SE ((uint16_t)0x0400) /*!< I2S Enable */ +#define SPI_I2SCFGR_I2SMOD ((uint16_t)0x0800) /*!< I2S mode selection */ + +/****************** Bit definition for SPI_I2SPR register *******************/ +#define SPI_I2SPR_I2SDIV ((uint16_t)0x00FF) /*!< I2S Linear prescaler */ +#define SPI_I2SPR_ODD ((uint16_t)0x0100) /*!< Odd factor for the prescaler */ +#define SPI_I2SPR_MCKOE ((uint16_t)0x0200) /*!< Master Clock Output Enable */ + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for I2C_CR1 register ********************/ +#define I2C_CR1_PE ((uint16_t)0x0001) /*!< Peripheral Enable */ +#define I2C_CR1_SMBUS ((uint16_t)0x0002) /*!< SMBus Mode */ +#define I2C_CR1_SMBTYPE ((uint16_t)0x0008) /*!< SMBus Type */ +#define I2C_CR1_ENARP ((uint16_t)0x0010) /*!< ARP Enable */ +#define I2C_CR1_ENPEC ((uint16_t)0x0020) /*!< PEC Enable */ +#define I2C_CR1_ENGC ((uint16_t)0x0040) /*!< General Call Enable */ +#define I2C_CR1_NOSTRETCH ((uint16_t)0x0080) /*!< Clock Stretching Disable (Slave mode) */ +#define I2C_CR1_START ((uint16_t)0x0100) /*!< Start Generation */ +#define I2C_CR1_STOP ((uint16_t)0x0200) /*!< Stop Generation */ +#define I2C_CR1_ACK ((uint16_t)0x0400) /*!< Acknowledge Enable */ +#define I2C_CR1_POS ((uint16_t)0x0800) /*!< Acknowledge/PEC Position (for data reception) */ +#define I2C_CR1_PEC ((uint16_t)0x1000) /*!< Packet Error Checking */ +#define I2C_CR1_ALERT ((uint16_t)0x2000) /*!< SMBus Alert */ +#define I2C_CR1_SWRST ((uint16_t)0x8000) /*!< Software Reset */ + +/******************* Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_FREQ ((uint16_t)0x003F) /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */ +#define I2C_CR2_FREQ_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define I2C_CR2_FREQ_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define I2C_CR2_FREQ_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define I2C_CR2_FREQ_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define I2C_CR2_FREQ_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define I2C_CR2_FREQ_5 ((uint16_t)0x0020) /*!< Bit 5 */ + +#define I2C_CR2_ITERREN ((uint16_t)0x0100) /*!< Error Interrupt Enable */ +#define I2C_CR2_ITEVTEN ((uint16_t)0x0200) /*!< Event Interrupt Enable */ +#define I2C_CR2_ITBUFEN ((uint16_t)0x0400) /*!< Buffer Interrupt Enable */ +#define I2C_CR2_DMAEN ((uint16_t)0x0800) /*!< DMA Requests Enable */ +#define I2C_CR2_LAST ((uint16_t)0x1000) /*!< DMA Last Transfer */ + +/******************* Bit definition for I2C_OAR1 register *******************/ +#define I2C_OAR1_ADD1_7 ((uint16_t)0x00FE) /*!< Interface Address */ +#define I2C_OAR1_ADD8_9 ((uint16_t)0x0300) /*!< Interface Address */ + +#define I2C_OAR1_ADD0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define I2C_OAR1_ADD1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define I2C_OAR1_ADD2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define I2C_OAR1_ADD3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define I2C_OAR1_ADD4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define I2C_OAR1_ADD5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define I2C_OAR1_ADD6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define I2C_OAR1_ADD7 ((uint16_t)0x0080) /*!< Bit 7 */ +#define I2C_OAR1_ADD8 ((uint16_t)0x0100) /*!< Bit 8 */ +#define I2C_OAR1_ADD9 ((uint16_t)0x0200) /*!< Bit 9 */ + +#define I2C_OAR1_ADDMODE ((uint16_t)0x8000) /*!< Addressing Mode (Slave mode) */ + +/******************* Bit definition for I2C_OAR2 register *******************/ +#define I2C_OAR2_ENDUAL ((uint8_t)0x01) /*!< Dual addressing mode enable */ +#define I2C_OAR2_ADD2 ((uint8_t)0xFE) /*!< Interface address */ + +/******************** Bit definition for I2C_DR register ********************/ +#define I2C_DR_DR ((uint8_t)0xFF) /*!< 8-bit Data Register */ + +/******************* Bit definition for I2C_SR1 register ********************/ +#define I2C_SR1_SB ((uint16_t)0x0001) /*!< Start Bit (Master mode) */ +#define I2C_SR1_ADDR ((uint16_t)0x0002) /*!< Address sent (master mode)/matched (slave mode) */ +#define I2C_SR1_BTF ((uint16_t)0x0004) /*!< Byte Transfer Finished */ +#define I2C_SR1_ADD10 ((uint16_t)0x0008) /*!< 10-bit header sent (Master mode) */ +#define I2C_SR1_STOPF ((uint16_t)0x0010) /*!< Stop detection (Slave mode) */ +#define I2C_SR1_RXNE ((uint16_t)0x0040) /*!< Data Register not Empty (receivers) */ +#define I2C_SR1_TXE ((uint16_t)0x0080) /*!< Data Register Empty (transmitters) */ +#define I2C_SR1_BERR ((uint16_t)0x0100) /*!< Bus Error */ +#define I2C_SR1_ARLO ((uint16_t)0x0200) /*!< Arbitration Lost (master mode) */ +#define I2C_SR1_AF ((uint16_t)0x0400) /*!< Acknowledge Failure */ +#define I2C_SR1_OVR ((uint16_t)0x0800) /*!< Overrun/Underrun */ +#define I2C_SR1_PECERR ((uint16_t)0x1000) /*!< PEC Error in reception */ +#define I2C_SR1_TIMEOUT ((uint16_t)0x4000) /*!< Timeout or Tlow Error */ +#define I2C_SR1_SMBALERT ((uint16_t)0x8000) /*!< SMBus Alert */ + +/******************* Bit definition for I2C_SR2 register ********************/ +#define I2C_SR2_MSL ((uint16_t)0x0001) /*!< Master/Slave */ +#define I2C_SR2_BUSY ((uint16_t)0x0002) /*!< Bus Busy */ +#define I2C_SR2_TRA ((uint16_t)0x0004) /*!< Transmitter/Receiver */ +#define I2C_SR2_GENCALL ((uint16_t)0x0010) /*!< General Call Address (Slave mode) */ +#define I2C_SR2_SMBDEFAULT ((uint16_t)0x0020) /*!< SMBus Device Default Address (Slave mode) */ +#define I2C_SR2_SMBHOST ((uint16_t)0x0040) /*!< SMBus Host Header (Slave mode) */ +#define I2C_SR2_DUALF ((uint16_t)0x0080) /*!< Dual Flag (Slave mode) */ +#define I2C_SR2_PEC ((uint16_t)0xFF00) /*!< Packet Error Checking Register */ + +/******************* Bit definition for I2C_CCR register ********************/ +#define I2C_CCR_CCR ((uint16_t)0x0FFF) /*!< Clock Control Register in Fast/Standard mode (Master mode) */ +#define I2C_CCR_DUTY ((uint16_t)0x4000) /*!< Fast Mode Duty Cycle */ +#define I2C_CCR_FS ((uint16_t)0x8000) /*!< I2C Master Mode Selection */ + +/****************** Bit definition for I2C_TRISE register *******************/ +#define I2C_TRISE_TRISE ((uint8_t)0x3F) /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */ + +/******************************************************************************/ +/* */ +/* Universal Synchronous Asynchronous Receiver Transmitter */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for USART_SR register *******************/ +#define USART_SR_PE ((uint16_t)0x0001) /*!< Parity Error */ +#define USART_SR_FE ((uint16_t)0x0002) /*!< Framing Error */ +#define USART_SR_NE ((uint16_t)0x0004) /*!< Noise Error Flag */ +#define USART_SR_ORE ((uint16_t)0x0008) /*!< OverRun Error */ +#define USART_SR_IDLE ((uint16_t)0x0010) /*!< IDLE line detected */ +#define USART_SR_RXNE ((uint16_t)0x0020) /*!< Read Data Register Not Empty */ +#define USART_SR_TC ((uint16_t)0x0040) /*!< Transmission Complete */ +#define USART_SR_TXE ((uint16_t)0x0080) /*!< Transmit Data Register Empty */ +#define USART_SR_LBD ((uint16_t)0x0100) /*!< LIN Break Detection Flag */ +#define USART_SR_CTS ((uint16_t)0x0200) /*!< CTS Flag */ + +/******************* Bit definition for USART_DR register *******************/ +#define USART_DR_DR ((uint16_t)0x01FF) /*!< Data value */ + +/****************** Bit definition for USART_BRR register *******************/ +#define USART_BRR_DIV_Fraction ((uint16_t)0x000F) /*!< Fraction of USARTDIV */ +#define USART_BRR_DIV_Mantissa ((uint16_t)0xFFF0) /*!< Mantissa of USARTDIV */ + +/****************** Bit definition for USART_CR1 register *******************/ +#define USART_CR1_SBK ((uint16_t)0x0001) /*!< Send Break */ +#define USART_CR1_RWU ((uint16_t)0x0002) /*!< Receiver wakeup */ +#define USART_CR1_RE ((uint16_t)0x0004) /*!< Receiver Enable */ +#define USART_CR1_TE ((uint16_t)0x0008) /*!< Transmitter Enable */ +#define USART_CR1_IDLEIE ((uint16_t)0x0010) /*!< IDLE Interrupt Enable */ +#define USART_CR1_RXNEIE ((uint16_t)0x0020) /*!< RXNE Interrupt Enable */ +#define USART_CR1_TCIE ((uint16_t)0x0040) /*!< Transmission Complete Interrupt Enable */ +#define USART_CR1_TXEIE ((uint16_t)0x0080) /*!< PE Interrupt Enable */ +#define USART_CR1_PEIE ((uint16_t)0x0100) /*!< PE Interrupt Enable */ +#define USART_CR1_PS ((uint16_t)0x0200) /*!< Parity Selection */ +#define USART_CR1_PCE ((uint16_t)0x0400) /*!< Parity Control Enable */ +#define USART_CR1_WAKE ((uint16_t)0x0800) /*!< Wakeup method */ +#define USART_CR1_M ((uint16_t)0x1000) /*!< Word length */ +#define USART_CR1_UE ((uint16_t)0x2000) /*!< USART Enable */ +#define USART_CR1_OVER8 ((uint16_t)0x8000) /*!< USART Oversmapling 8-bits */ + +/****************** Bit definition for USART_CR2 register *******************/ +#define USART_CR2_ADD ((uint16_t)0x000F) /*!< Address of the USART node */ +#define USART_CR2_LBDL ((uint16_t)0x0020) /*!< LIN Break Detection Length */ +#define USART_CR2_LBDIE ((uint16_t)0x0040) /*!< LIN Break Detection Interrupt Enable */ +#define USART_CR2_LBCL ((uint16_t)0x0100) /*!< Last Bit Clock pulse */ +#define USART_CR2_CPHA ((uint16_t)0x0200) /*!< Clock Phase */ +#define USART_CR2_CPOL ((uint16_t)0x0400) /*!< Clock Polarity */ +#define USART_CR2_CLKEN ((uint16_t)0x0800) /*!< Clock Enable */ + +#define USART_CR2_STOP ((uint16_t)0x3000) /*!< STOP[1:0] bits (STOP bits) */ +#define USART_CR2_STOP_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USART_CR2_STOP_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USART_CR2_LINEN ((uint16_t)0x4000) /*!< LIN mode enable */ + +/****************** Bit definition for USART_CR3 register *******************/ +#define USART_CR3_EIE ((uint16_t)0x0001) /*!< Error Interrupt Enable */ +#define USART_CR3_IREN ((uint16_t)0x0002) /*!< IrDA mode Enable */ +#define USART_CR3_IRLP ((uint16_t)0x0004) /*!< IrDA Low-Power */ +#define USART_CR3_HDSEL ((uint16_t)0x0008) /*!< Half-Duplex Selection */ +#define USART_CR3_NACK ((uint16_t)0x0010) /*!< Smartcard NACK enable */ +#define USART_CR3_SCEN ((uint16_t)0x0020) /*!< Smartcard mode enable */ +#define USART_CR3_DMAR ((uint16_t)0x0040) /*!< DMA Enable Receiver */ +#define USART_CR3_DMAT ((uint16_t)0x0080) /*!< DMA Enable Transmitter */ +#define USART_CR3_RTSE ((uint16_t)0x0100) /*!< RTS Enable */ +#define USART_CR3_CTSE ((uint16_t)0x0200) /*!< CTS Enable */ +#define USART_CR3_CTSIE ((uint16_t)0x0400) /*!< CTS Interrupt Enable */ +#define USART_CR3_ONEBIT ((uint16_t)0x0800) /*!< One Bit method */ + +/****************** Bit definition for USART_GTPR register ******************/ +#define USART_GTPR_PSC ((uint16_t)0x00FF) /*!< PSC[7:0] bits (Prescaler value) */ +#define USART_GTPR_PSC_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define USART_GTPR_PSC_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define USART_GTPR_PSC_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define USART_GTPR_PSC_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define USART_GTPR_PSC_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define USART_GTPR_PSC_5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define USART_GTPR_PSC_6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define USART_GTPR_PSC_7 ((uint16_t)0x0080) /*!< Bit 7 */ + +#define USART_GTPR_GT ((uint16_t)0xFF00) /*!< Guard time value */ + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ + +/**************** Bit definition for DBGMCU_IDCODE register *****************/ +#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */ + +#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */ +#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */ +#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */ +#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */ +#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */ +#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */ +#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */ +#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */ +#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */ +#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */ + +/****************** Bit definition for DBGMCU_CR register *******************/ +#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001) /*!< Debug Sleep Mode */ +#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */ +#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */ +#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020) /*!< Trace Pin Assignment Control */ + +#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0) /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */ +#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define DBGMCU_CR_DBG_IWDG_STOP ((uint32_t)0x00000100) /*!< Debug Independent Watchdog stopped when Core is halted */ +#define DBGMCU_CR_DBG_WWDG_STOP ((uint32_t)0x00000200) /*!< Debug Window Watchdog stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM1_STOP ((uint32_t)0x00000400) /*!< TIM1 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM2_STOP ((uint32_t)0x00000800) /*!< TIM2 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM3_STOP ((uint32_t)0x00001000) /*!< TIM3 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM4_STOP ((uint32_t)0x00002000) /*!< TIM4 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_CAN1_STOP ((uint32_t)0x00004000) /*!< Debug CAN1 stopped when Core is halted */ +#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000) /*!< SMBUS timeout mode stopped when Core is halted */ +#define DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000) /*!< SMBUS timeout mode stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM8_STOP ((uint32_t)0x00020000) /*!< TIM8 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM5_STOP ((uint32_t)0x00040000) /*!< TIM5 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM6_STOP ((uint32_t)0x00080000) /*!< TIM6 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM7_STOP ((uint32_t)0x00100000) /*!< TIM7 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_CAN2_STOP ((uint32_t)0x00200000) /*!< Debug CAN2 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM15_STOP ((uint32_t)0x00400000) /*!< Debug TIM15 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM16_STOP ((uint32_t)0x00800000) /*!< Debug TIM16 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM17_STOP ((uint32_t)0x01000000) /*!< Debug TIM17 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM12_STOP ((uint32_t)0x02000000) /*!< Debug TIM12 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM13_STOP ((uint32_t)0x04000000) /*!< Debug TIM13 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM14_STOP ((uint32_t)0x08000000) /*!< Debug TIM14 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM9_STOP ((uint32_t)0x10000000) /*!< Debug TIM9 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM10_STOP ((uint32_t)0x20000000) /*!< Debug TIM10 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM11_STOP ((uint32_t)0x40000000) /*!< Debug TIM11 stopped when Core is halted */ + +/******************************************************************************/ +/* */ +/* FLASH and Option Bytes Registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for FLASH_ACR register ******************/ +#define FLASH_ACR_LATENCY ((uint8_t)0x03) /*!< LATENCY[2:0] bits (Latency) */ +#define FLASH_ACR_LATENCY_0 ((uint8_t)0x00) /*!< Bit 0 */ +#define FLASH_ACR_LATENCY_1 ((uint8_t)0x01) /*!< Bit 0 */ +#define FLASH_ACR_LATENCY_2 ((uint8_t)0x02) /*!< Bit 1 */ + +#define FLASH_ACR_HLFCYA ((uint8_t)0x08) /*!< Flash Half Cycle Access Enable */ +#define FLASH_ACR_PRFTBE ((uint8_t)0x10) /*!< Prefetch Buffer Enable */ +#define FLASH_ACR_PRFTBS ((uint8_t)0x20) /*!< Prefetch Buffer Status */ + +/****************** Bit definition for FLASH_KEYR register ******************/ +#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */ + +/***************** Bit definition for FLASH_OPTKEYR register ****************/ +#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */ + +/****************** Bit definition for FLASH_SR register *******************/ +#define FLASH_SR_BSY ((uint8_t)0x01) /*!< Busy */ +#define FLASH_SR_PGERR ((uint8_t)0x04) /*!< Programming Error */ +#define FLASH_SR_WRPRTERR ((uint8_t)0x10) /*!< Write Protection Error */ +#define FLASH_SR_EOP ((uint8_t)0x20) /*!< End of operation */ + +/******************* Bit definition for FLASH_CR register *******************/ +#define FLASH_CR_PG ((uint16_t)0x0001) /*!< Programming */ +#define FLASH_CR_PER ((uint16_t)0x0002) /*!< Page Erase */ +#define FLASH_CR_MER ((uint16_t)0x0004) /*!< Mass Erase */ +#define FLASH_CR_OPTPG ((uint16_t)0x0010) /*!< Option Byte Programming */ +#define FLASH_CR_OPTER ((uint16_t)0x0020) /*!< Option Byte Erase */ +#define FLASH_CR_STRT ((uint16_t)0x0040) /*!< Start */ +#define FLASH_CR_LOCK ((uint16_t)0x0080) /*!< Lock */ +#define FLASH_CR_OPTWRE ((uint16_t)0x0200) /*!< Option Bytes Write Enable */ +#define FLASH_CR_ERRIE ((uint16_t)0x0400) /*!< Error Interrupt Enable */ +#define FLASH_CR_EOPIE ((uint16_t)0x1000) /*!< End of operation interrupt enable */ + +/******************* Bit definition for FLASH_AR register *******************/ +#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */ + +/****************** Bit definition for FLASH_OBR register *******************/ +#define FLASH_OBR_OPTERR ((uint16_t)0x0001) /*!< Option Byte Error */ +#define FLASH_OBR_RDPRT ((uint16_t)0x0002) /*!< Read protection */ + +#define FLASH_OBR_USER ((uint16_t)0x03FC) /*!< User Option Bytes */ +#define FLASH_OBR_WDG_SW ((uint16_t)0x0004) /*!< WDG_SW */ +#define FLASH_OBR_nRST_STOP ((uint16_t)0x0008) /*!< nRST_STOP */ +#define FLASH_OBR_nRST_STDBY ((uint16_t)0x0010) /*!< nRST_STDBY */ +#define FLASH_OBR_BFB2 ((uint16_t)0x0020) /*!< BFB2 */ + +/****************** Bit definition for FLASH_WRPR register ******************/ +#define FLASH_WRPR_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for FLASH_RDP register *******************/ +#define FLASH_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */ +#define FLASH_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */ + +/****************** Bit definition for FLASH_USER register ******************/ +#define FLASH_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */ +#define FLASH_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */ + +/****************** Bit definition for FLASH_Data0 register *****************/ +#define FLASH_Data0_Data0 ((uint32_t)0x000000FF) /*!< User data storage option byte */ +#define FLASH_Data0_nData0 ((uint32_t)0x0000FF00) /*!< User data storage complemented option byte */ + +/****************** Bit definition for FLASH_Data1 register *****************/ +#define FLASH_Data1_Data1 ((uint32_t)0x00FF0000) /*!< User data storage option byte */ +#define FLASH_Data1_nData1 ((uint32_t)0xFF000000) /*!< User data storage complemented option byte */ + +/****************** Bit definition for FLASH_WRP0 register ******************/ +#define FLASH_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP1 register ******************/ +#define FLASH_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP2 register ******************/ +#define FLASH_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP3 register ******************/ +#define FLASH_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */ + +#ifdef STM32F10X_CL +/******************************************************************************/ +/* Ethernet MAC Registers bits definitions */ +/******************************************************************************/ +/* Bit definition for Ethernet MAC Control Register register */ +#define ETH_MACCR_WD ((uint32_t)0x00800000) /* Watchdog disable */ +#define ETH_MACCR_JD ((uint32_t)0x00400000) /* Jabber disable */ +#define ETH_MACCR_IFG ((uint32_t)0x000E0000) /* Inter-frame gap */ + #define ETH_MACCR_IFG_96Bit ((uint32_t)0x00000000) /* Minimum IFG between frames during transmission is 96Bit */ + #define ETH_MACCR_IFG_88Bit ((uint32_t)0x00020000) /* Minimum IFG between frames during transmission is 88Bit */ + #define ETH_MACCR_IFG_80Bit ((uint32_t)0x00040000) /* Minimum IFG between frames during transmission is 80Bit */ + #define ETH_MACCR_IFG_72Bit ((uint32_t)0x00060000) /* Minimum IFG between frames during transmission is 72Bit */ + #define ETH_MACCR_IFG_64Bit ((uint32_t)0x00080000) /* Minimum IFG between frames during transmission is 64Bit */ + #define ETH_MACCR_IFG_56Bit ((uint32_t)0x000A0000) /* Minimum IFG between frames during transmission is 56Bit */ + #define ETH_MACCR_IFG_48Bit ((uint32_t)0x000C0000) /* Minimum IFG between frames during transmission is 48Bit */ + #define ETH_MACCR_IFG_40Bit ((uint32_t)0x000E0000) /* Minimum IFG between frames during transmission is 40Bit */ +#define ETH_MACCR_CSD ((uint32_t)0x00010000) /* Carrier sense disable (during transmission) */ +#define ETH_MACCR_FES ((uint32_t)0x00004000) /* Fast ethernet speed */ +#define ETH_MACCR_ROD ((uint32_t)0x00002000) /* Receive own disable */ +#define ETH_MACCR_LM ((uint32_t)0x00001000) /* loopback mode */ +#define ETH_MACCR_DM ((uint32_t)0x00000800) /* Duplex mode */ +#define ETH_MACCR_IPCO ((uint32_t)0x00000400) /* IP Checksum offload */ +#define ETH_MACCR_RD ((uint32_t)0x00000200) /* Retry disable */ +#define ETH_MACCR_APCS ((uint32_t)0x00000080) /* Automatic Pad/CRC stripping */ +#define ETH_MACCR_BL ((uint32_t)0x00000060) /* Back-off limit: random integer number (r) of slot time delays before rescheduling + a transmission attempt during retries after a collision: 0 =< r <2^k */ + #define ETH_MACCR_BL_10 ((uint32_t)0x00000000) /* k = min (n, 10) */ + #define ETH_MACCR_BL_8 ((uint32_t)0x00000020) /* k = min (n, 8) */ + #define ETH_MACCR_BL_4 ((uint32_t)0x00000040) /* k = min (n, 4) */ + #define ETH_MACCR_BL_1 ((uint32_t)0x00000060) /* k = min (n, 1) */ +#define ETH_MACCR_DC ((uint32_t)0x00000010) /* Defferal check */ +#define ETH_MACCR_TE ((uint32_t)0x00000008) /* Transmitter enable */ +#define ETH_MACCR_RE ((uint32_t)0x00000004) /* Receiver enable */ + +/* Bit definition for Ethernet MAC Frame Filter Register */ +#define ETH_MACFFR_RA ((uint32_t)0x80000000) /* Receive all */ +#define ETH_MACFFR_HPF ((uint32_t)0x00000400) /* Hash or perfect filter */ +#define ETH_MACFFR_SAF ((uint32_t)0x00000200) /* Source address filter enable */ +#define ETH_MACFFR_SAIF ((uint32_t)0x00000100) /* SA inverse filtering */ +#define ETH_MACFFR_PCF ((uint32_t)0x000000C0) /* Pass control frames: 3 cases */ + #define ETH_MACFFR_PCF_BlockAll ((uint32_t)0x00000040) /* MAC filters all control frames from reaching the application */ + #define ETH_MACFFR_PCF_ForwardAll ((uint32_t)0x00000080) /* MAC forwards all control frames to application even if they fail the Address Filter */ + #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0) /* MAC forwards control frames that pass the Address Filter. */ +#define ETH_MACFFR_BFD ((uint32_t)0x00000020) /* Broadcast frame disable */ +#define ETH_MACFFR_PAM ((uint32_t)0x00000010) /* Pass all mutlicast */ +#define ETH_MACFFR_DAIF ((uint32_t)0x00000008) /* DA Inverse filtering */ +#define ETH_MACFFR_HM ((uint32_t)0x00000004) /* Hash multicast */ +#define ETH_MACFFR_HU ((uint32_t)0x00000002) /* Hash unicast */ +#define ETH_MACFFR_PM ((uint32_t)0x00000001) /* Promiscuous mode */ + +/* Bit definition for Ethernet MAC Hash Table High Register */ +#define ETH_MACHTHR_HTH ((uint32_t)0xFFFFFFFF) /* Hash table high */ + +/* Bit definition for Ethernet MAC Hash Table Low Register */ +#define ETH_MACHTLR_HTL ((uint32_t)0xFFFFFFFF) /* Hash table low */ + +/* Bit definition for Ethernet MAC MII Address Register */ +#define ETH_MACMIIAR_PA ((uint32_t)0x0000F800) /* Physical layer address */ +#define ETH_MACMIIAR_MR ((uint32_t)0x000007C0) /* MII register in the selected PHY */ +#define ETH_MACMIIAR_CR ((uint32_t)0x0000001C) /* CR clock range: 6 cases */ + #define ETH_MACMIIAR_CR_Div42 ((uint32_t)0x00000000) /* HCLK:60-72 MHz; MDC clock= HCLK/42 */ + #define ETH_MACMIIAR_CR_Div16 ((uint32_t)0x00000008) /* HCLK:20-35 MHz; MDC clock= HCLK/16 */ + #define ETH_MACMIIAR_CR_Div26 ((uint32_t)0x0000000C) /* HCLK:35-60 MHz; MDC clock= HCLK/26 */ +#define ETH_MACMIIAR_MW ((uint32_t)0x00000002) /* MII write */ +#define ETH_MACMIIAR_MB ((uint32_t)0x00000001) /* MII busy */ + +/* Bit definition for Ethernet MAC MII Data Register */ +#define ETH_MACMIIDR_MD ((uint32_t)0x0000FFFF) /* MII data: read/write data from/to PHY */ + +/* Bit definition for Ethernet MAC Flow Control Register */ +#define ETH_MACFCR_PT ((uint32_t)0xFFFF0000) /* Pause time */ +#define ETH_MACFCR_ZQPD ((uint32_t)0x00000080) /* Zero-quanta pause disable */ +#define ETH_MACFCR_PLT ((uint32_t)0x00000030) /* Pause low threshold: 4 cases */ + #define ETH_MACFCR_PLT_Minus4 ((uint32_t)0x00000000) /* Pause time minus 4 slot times */ + #define ETH_MACFCR_PLT_Minus28 ((uint32_t)0x00000010) /* Pause time minus 28 slot times */ + #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020) /* Pause time minus 144 slot times */ + #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030) /* Pause time minus 256 slot times */ +#define ETH_MACFCR_UPFD ((uint32_t)0x00000008) /* Unicast pause frame detect */ +#define ETH_MACFCR_RFCE ((uint32_t)0x00000004) /* Receive flow control enable */ +#define ETH_MACFCR_TFCE ((uint32_t)0x00000002) /* Transmit flow control enable */ +#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001) /* Flow control busy/backpressure activate */ + +/* Bit definition for Ethernet MAC VLAN Tag Register */ +#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000) /* 12-bit VLAN tag comparison */ +#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF) /* VLAN tag identifier (for receive frames) */ + +/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */ +#define ETH_MACRWUFFR_D ((uint32_t)0xFFFFFFFF) /* Wake-up frame filter register data */ +/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers. + Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */ +/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask + Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask + Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask + Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask + Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command - + RSVD - Filter1 Command - RSVD - Filter0 Command + Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset + Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16 + Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */ + +/* Bit definition for Ethernet MAC PMT Control and Status Register */ +#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000) /* Wake-Up Frame Filter Register Pointer Reset */ +#define ETH_MACPMTCSR_GU ((uint32_t)0x00000200) /* Global Unicast */ +#define ETH_MACPMTCSR_WFR ((uint32_t)0x00000040) /* Wake-Up Frame Received */ +#define ETH_MACPMTCSR_MPR ((uint32_t)0x00000020) /* Magic Packet Received */ +#define ETH_MACPMTCSR_WFE ((uint32_t)0x00000004) /* Wake-Up Frame Enable */ +#define ETH_MACPMTCSR_MPE ((uint32_t)0x00000002) /* Magic Packet Enable */ +#define ETH_MACPMTCSR_PD ((uint32_t)0x00000001) /* Power Down */ + +/* Bit definition for Ethernet MAC Status Register */ +#define ETH_MACSR_TSTS ((uint32_t)0x00000200) /* Time stamp trigger status */ +#define ETH_MACSR_MMCTS ((uint32_t)0x00000040) /* MMC transmit status */ +#define ETH_MACSR_MMMCRS ((uint32_t)0x00000020) /* MMC receive status */ +#define ETH_MACSR_MMCS ((uint32_t)0x00000010) /* MMC status */ +#define ETH_MACSR_PMTS ((uint32_t)0x00000008) /* PMT status */ + +/* Bit definition for Ethernet MAC Interrupt Mask Register */ +#define ETH_MACIMR_TSTIM ((uint32_t)0x00000200) /* Time stamp trigger interrupt mask */ +#define ETH_MACIMR_PMTIM ((uint32_t)0x00000008) /* PMT interrupt mask */ + +/* Bit definition for Ethernet MAC Address0 High Register */ +#define ETH_MACA0HR_MACA0H ((uint32_t)0x0000FFFF) /* MAC address0 high */ + +/* Bit definition for Ethernet MAC Address0 Low Register */ +#define ETH_MACA0LR_MACA0L ((uint32_t)0xFFFFFFFF) /* MAC address0 low */ + +/* Bit definition for Ethernet MAC Address1 High Register */ +#define ETH_MACA1HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA1HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA1HR_MBC ((uint32_t)0x3F000000) /* Mask byte control: bits to mask for comparison of the MAC Address bytes */ + #define ETH_MACA1HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA1HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA1HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA1HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA1HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA1HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [7:0] */ +#define ETH_MACA1HR_MACA1H ((uint32_t)0x0000FFFF) /* MAC address1 high */ + +/* Bit definition for Ethernet MAC Address1 Low Register */ +#define ETH_MACA1LR_MACA1L ((uint32_t)0xFFFFFFFF) /* MAC address1 low */ + +/* Bit definition for Ethernet MAC Address2 High Register */ +#define ETH_MACA2HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA2HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA2HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */ + #define ETH_MACA2HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA2HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA2HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA2HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA2HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA2HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */ +#define ETH_MACA2HR_MACA2H ((uint32_t)0x0000FFFF) /* MAC address1 high */ + +/* Bit definition for Ethernet MAC Address2 Low Register */ +#define ETH_MACA2LR_MACA2L ((uint32_t)0xFFFFFFFF) /* MAC address2 low */ + +/* Bit definition for Ethernet MAC Address3 High Register */ +#define ETH_MACA3HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA3HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA3HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */ + #define ETH_MACA3HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA3HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA3HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA3HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA3HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA3HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */ +#define ETH_MACA3HR_MACA3H ((uint32_t)0x0000FFFF) /* MAC address3 high */ + +/* Bit definition for Ethernet MAC Address3 Low Register */ +#define ETH_MACA3LR_MACA3L ((uint32_t)0xFFFFFFFF) /* MAC address3 low */ + +/******************************************************************************/ +/* Ethernet MMC Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet MMC Contol Register */ +#define ETH_MMCCR_MCF ((uint32_t)0x00000008) /* MMC Counter Freeze */ +#define ETH_MMCCR_ROR ((uint32_t)0x00000004) /* Reset on Read */ +#define ETH_MMCCR_CSR ((uint32_t)0x00000002) /* Counter Stop Rollover */ +#define ETH_MMCCR_CR ((uint32_t)0x00000001) /* Counters Reset */ + +/* Bit definition for Ethernet MMC Receive Interrupt Register */ +#define ETH_MMCRIR_RGUFS ((uint32_t)0x00020000) /* Set when Rx good unicast frames counter reaches half the maximum value */ +#define ETH_MMCRIR_RFAES ((uint32_t)0x00000040) /* Set when Rx alignment error counter reaches half the maximum value */ +#define ETH_MMCRIR_RFCES ((uint32_t)0x00000020) /* Set when Rx crc error counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmit Interrupt Register */ +#define ETH_MMCTIR_TGFS ((uint32_t)0x00200000) /* Set when Tx good frame count counter reaches half the maximum value */ +#define ETH_MMCTIR_TGFMSCS ((uint32_t)0x00008000) /* Set when Tx good multi col counter reaches half the maximum value */ +#define ETH_MMCTIR_TGFSCS ((uint32_t)0x00004000) /* Set when Tx good single col counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */ +#define ETH_MMCRIMR_RGUFM ((uint32_t)0x00020000) /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */ +#define ETH_MMCRIMR_RFAEM ((uint32_t)0x00000040) /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */ +#define ETH_MMCRIMR_RFCEM ((uint32_t)0x00000020) /* Mask the interrupt when Rx crc error counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */ +#define ETH_MMCTIMR_TGFM ((uint32_t)0x00200000) /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */ +#define ETH_MMCTIMR_TGFMSCM ((uint32_t)0x00008000) /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */ +#define ETH_MMCTIMR_TGFSCM ((uint32_t)0x00004000) /* Mask the interrupt when Tx good single col counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */ +#define ETH_MMCTGFSCCR_TGFSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */ +#define ETH_MMCTGFMSCCR_TGFMSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */ +#define ETH_MMCTGFCR_TGFC ((uint32_t)0xFFFFFFFF) /* Number of good frames transmitted. */ + +/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */ +#define ETH_MMCRFCECR_RFCEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with CRC error. */ + +/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */ +#define ETH_MMCRFAECR_RFAEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with alignment (dribble) error */ + +/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */ +#define ETH_MMCRGUFCR_RGUFC ((uint32_t)0xFFFFFFFF) /* Number of good unicast frames received. */ + +/******************************************************************************/ +/* Ethernet PTP Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet PTP Time Stamp Contol Register */ +#define ETH_PTPTSCR_TSARU ((uint32_t)0x00000020) /* Addend register update */ +#define ETH_PTPTSCR_TSITE ((uint32_t)0x00000010) /* Time stamp interrupt trigger enable */ +#define ETH_PTPTSCR_TSSTU ((uint32_t)0x00000008) /* Time stamp update */ +#define ETH_PTPTSCR_TSSTI ((uint32_t)0x00000004) /* Time stamp initialize */ +#define ETH_PTPTSCR_TSFCU ((uint32_t)0x00000002) /* Time stamp fine or coarse update */ +#define ETH_PTPTSCR_TSE ((uint32_t)0x00000001) /* Time stamp enable */ + +/* Bit definition for Ethernet PTP Sub-Second Increment Register */ +#define ETH_PTPSSIR_STSSI ((uint32_t)0x000000FF) /* System time Sub-second increment value */ + +/* Bit definition for Ethernet PTP Time Stamp High Register */ +#define ETH_PTPTSHR_STS ((uint32_t)0xFFFFFFFF) /* System Time second */ + +/* Bit definition for Ethernet PTP Time Stamp Low Register */ +#define ETH_PTPTSLR_STPNS ((uint32_t)0x80000000) /* System Time Positive or negative time */ +#define ETH_PTPTSLR_STSS ((uint32_t)0x7FFFFFFF) /* System Time sub-seconds */ + +/* Bit definition for Ethernet PTP Time Stamp High Update Register */ +#define ETH_PTPTSHUR_TSUS ((uint32_t)0xFFFFFFFF) /* Time stamp update seconds */ + +/* Bit definition for Ethernet PTP Time Stamp Low Update Register */ +#define ETH_PTPTSLUR_TSUPNS ((uint32_t)0x80000000) /* Time stamp update Positive or negative time */ +#define ETH_PTPTSLUR_TSUSS ((uint32_t)0x7FFFFFFF) /* Time stamp update sub-seconds */ + +/* Bit definition for Ethernet PTP Time Stamp Addend Register */ +#define ETH_PTPTSAR_TSA ((uint32_t)0xFFFFFFFF) /* Time stamp addend */ + +/* Bit definition for Ethernet PTP Target Time High Register */ +#define ETH_PTPTTHR_TTSH ((uint32_t)0xFFFFFFFF) /* Target time stamp high */ + +/* Bit definition for Ethernet PTP Target Time Low Register */ +#define ETH_PTPTTLR_TTSL ((uint32_t)0xFFFFFFFF) /* Target time stamp low */ + +/******************************************************************************/ +/* Ethernet DMA Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet DMA Bus Mode Register */ +#define ETH_DMABMR_AAB ((uint32_t)0x02000000) /* Address-Aligned beats */ +#define ETH_DMABMR_FPM ((uint32_t)0x01000000) /* 4xPBL mode */ +#define ETH_DMABMR_USP ((uint32_t)0x00800000) /* Use separate PBL */ +#define ETH_DMABMR_RDP ((uint32_t)0x007E0000) /* RxDMA PBL */ + #define ETH_DMABMR_RDP_1Beat ((uint32_t)0x00020000) /* maximum number of beats to be transferred in one RxDMA transaction is 1 */ + #define ETH_DMABMR_RDP_2Beat ((uint32_t)0x00040000) /* maximum number of beats to be transferred in one RxDMA transaction is 2 */ + #define ETH_DMABMR_RDP_4Beat ((uint32_t)0x00080000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */ + #define ETH_DMABMR_RDP_8Beat ((uint32_t)0x00100000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */ + #define ETH_DMABMR_RDP_16Beat ((uint32_t)0x00200000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */ + #define ETH_DMABMR_RDP_32Beat ((uint32_t)0x00400000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */ + #define ETH_DMABMR_RDP_4xPBL_4Beat ((uint32_t)0x01020000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */ + #define ETH_DMABMR_RDP_4xPBL_8Beat ((uint32_t)0x01040000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */ + #define ETH_DMABMR_RDP_4xPBL_16Beat ((uint32_t)0x01080000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */ + #define ETH_DMABMR_RDP_4xPBL_32Beat ((uint32_t)0x01100000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */ + #define ETH_DMABMR_RDP_4xPBL_64Beat ((uint32_t)0x01200000) /* maximum number of beats to be transferred in one RxDMA transaction is 64 */ + #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000) /* maximum number of beats to be transferred in one RxDMA transaction is 128 */ +#define ETH_DMABMR_FB ((uint32_t)0x00010000) /* Fixed Burst */ +#define ETH_DMABMR_RTPR ((uint32_t)0x0000C000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_1_1 ((uint32_t)0x00000000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_2_1 ((uint32_t)0x00004000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_3_1 ((uint32_t)0x00008000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_4_1 ((uint32_t)0x0000C000) /* Rx Tx priority ratio */ +#define ETH_DMABMR_PBL ((uint32_t)0x00003F00) /* Programmable burst length */ + #define ETH_DMABMR_PBL_1Beat ((uint32_t)0x00000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */ + #define ETH_DMABMR_PBL_2Beat ((uint32_t)0x00000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */ + #define ETH_DMABMR_PBL_4Beat ((uint32_t)0x00000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ + #define ETH_DMABMR_PBL_8Beat ((uint32_t)0x00000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ + #define ETH_DMABMR_PBL_16Beat ((uint32_t)0x00001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ + #define ETH_DMABMR_PBL_32Beat ((uint32_t)0x00002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ + #define ETH_DMABMR_PBL_4xPBL_4Beat ((uint32_t)0x01000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ + #define ETH_DMABMR_PBL_4xPBL_8Beat ((uint32_t)0x01000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ + #define ETH_DMABMR_PBL_4xPBL_16Beat ((uint32_t)0x01000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ + #define ETH_DMABMR_PBL_4xPBL_32Beat ((uint32_t)0x01000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ + #define ETH_DMABMR_PBL_4xPBL_64Beat ((uint32_t)0x01001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */ + #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */ +#define ETH_DMABMR_DSL ((uint32_t)0x0000007C) /* Descriptor Skip Length */ +#define ETH_DMABMR_DA ((uint32_t)0x00000002) /* DMA arbitration scheme */ +#define ETH_DMABMR_SR ((uint32_t)0x00000001) /* Software reset */ + +/* Bit definition for Ethernet DMA Transmit Poll Demand Register */ +#define ETH_DMATPDR_TPD ((uint32_t)0xFFFFFFFF) /* Transmit poll demand */ + +/* Bit definition for Ethernet DMA Receive Poll Demand Register */ +#define ETH_DMARPDR_RPD ((uint32_t)0xFFFFFFFF) /* Receive poll demand */ + +/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */ +#define ETH_DMARDLAR_SRL ((uint32_t)0xFFFFFFFF) /* Start of receive list */ + +/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */ +#define ETH_DMATDLAR_STL ((uint32_t)0xFFFFFFFF) /* Start of transmit list */ + +/* Bit definition for Ethernet DMA Status Register */ +#define ETH_DMASR_TSTS ((uint32_t)0x20000000) /* Time-stamp trigger status */ +#define ETH_DMASR_PMTS ((uint32_t)0x10000000) /* PMT status */ +#define ETH_DMASR_MMCS ((uint32_t)0x08000000) /* MMC status */ +#define ETH_DMASR_EBS ((uint32_t)0x03800000) /* Error bits status */ + /* combination with EBS[2:0] for GetFlagStatus function */ + #define ETH_DMASR_EBS_DescAccess ((uint32_t)0x02000000) /* Error bits 0-data buffer, 1-desc. access */ + #define ETH_DMASR_EBS_ReadTransf ((uint32_t)0x01000000) /* Error bits 0-write trnsf, 1-read transfr */ + #define ETH_DMASR_EBS_DataTransfTx ((uint32_t)0x00800000) /* Error bits 0-Rx DMA, 1-Tx DMA */ +#define ETH_DMASR_TPS ((uint32_t)0x00700000) /* Transmit process state */ + #define ETH_DMASR_TPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Tx Command issued */ + #define ETH_DMASR_TPS_Fetching ((uint32_t)0x00100000) /* Running - fetching the Tx descriptor */ + #define ETH_DMASR_TPS_Waiting ((uint32_t)0x00200000) /* Running - waiting for status */ + #define ETH_DMASR_TPS_Reading ((uint32_t)0x00300000) /* Running - reading the data from host memory */ + #define ETH_DMASR_TPS_Suspended ((uint32_t)0x00600000) /* Suspended - Tx Descriptor unavailabe */ + #define ETH_DMASR_TPS_Closing ((uint32_t)0x00700000) /* Running - closing Rx descriptor */ +#define ETH_DMASR_RPS ((uint32_t)0x000E0000) /* Receive process state */ + #define ETH_DMASR_RPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Rx Command issued */ + #define ETH_DMASR_RPS_Fetching ((uint32_t)0x00020000) /* Running - fetching the Rx descriptor */ + #define ETH_DMASR_RPS_Waiting ((uint32_t)0x00060000) /* Running - waiting for packet */ + #define ETH_DMASR_RPS_Suspended ((uint32_t)0x00080000) /* Suspended - Rx Descriptor unavailable */ + #define ETH_DMASR_RPS_Closing ((uint32_t)0x000A0000) /* Running - closing descriptor */ + #define ETH_DMASR_RPS_Queuing ((uint32_t)0x000E0000) /* Running - queuing the recieve frame into host memory */ +#define ETH_DMASR_NIS ((uint32_t)0x00010000) /* Normal interrupt summary */ +#define ETH_DMASR_AIS ((uint32_t)0x00008000) /* Abnormal interrupt summary */ +#define ETH_DMASR_ERS ((uint32_t)0x00004000) /* Early receive status */ +#define ETH_DMASR_FBES ((uint32_t)0x00002000) /* Fatal bus error status */ +#define ETH_DMASR_ETS ((uint32_t)0x00000400) /* Early transmit status */ +#define ETH_DMASR_RWTS ((uint32_t)0x00000200) /* Receive watchdog timeout status */ +#define ETH_DMASR_RPSS ((uint32_t)0x00000100) /* Receive process stopped status */ +#define ETH_DMASR_RBUS ((uint32_t)0x00000080) /* Receive buffer unavailable status */ +#define ETH_DMASR_RS ((uint32_t)0x00000040) /* Receive status */ +#define ETH_DMASR_TUS ((uint32_t)0x00000020) /* Transmit underflow status */ +#define ETH_DMASR_ROS ((uint32_t)0x00000010) /* Receive overflow status */ +#define ETH_DMASR_TJTS ((uint32_t)0x00000008) /* Transmit jabber timeout status */ +#define ETH_DMASR_TBUS ((uint32_t)0x00000004) /* Transmit buffer unavailable status */ +#define ETH_DMASR_TPSS ((uint32_t)0x00000002) /* Transmit process stopped status */ +#define ETH_DMASR_TS ((uint32_t)0x00000001) /* Transmit status */ + +/* Bit definition for Ethernet DMA Operation Mode Register */ +#define ETH_DMAOMR_DTCEFD ((uint32_t)0x04000000) /* Disable Dropping of TCP/IP checksum error frames */ +#define ETH_DMAOMR_RSF ((uint32_t)0x02000000) /* Receive store and forward */ +#define ETH_DMAOMR_DFRF ((uint32_t)0x01000000) /* Disable flushing of received frames */ +#define ETH_DMAOMR_TSF ((uint32_t)0x00200000) /* Transmit store and forward */ +#define ETH_DMAOMR_FTF ((uint32_t)0x00100000) /* Flush transmit FIFO */ +#define ETH_DMAOMR_TTC ((uint32_t)0x0001C000) /* Transmit threshold control */ + #define ETH_DMAOMR_TTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Transmit FIFO is 64 Bytes */ + #define ETH_DMAOMR_TTC_128Bytes ((uint32_t)0x00004000) /* threshold level of the MTL Transmit FIFO is 128 Bytes */ + #define ETH_DMAOMR_TTC_192Bytes ((uint32_t)0x00008000) /* threshold level of the MTL Transmit FIFO is 192 Bytes */ + #define ETH_DMAOMR_TTC_256Bytes ((uint32_t)0x0000C000) /* threshold level of the MTL Transmit FIFO is 256 Bytes */ + #define ETH_DMAOMR_TTC_40Bytes ((uint32_t)0x00010000) /* threshold level of the MTL Transmit FIFO is 40 Bytes */ + #define ETH_DMAOMR_TTC_32Bytes ((uint32_t)0x00014000) /* threshold level of the MTL Transmit FIFO is 32 Bytes */ + #define ETH_DMAOMR_TTC_24Bytes ((uint32_t)0x00018000) /* threshold level of the MTL Transmit FIFO is 24 Bytes */ + #define ETH_DMAOMR_TTC_16Bytes ((uint32_t)0x0001C000) /* threshold level of the MTL Transmit FIFO is 16 Bytes */ +#define ETH_DMAOMR_ST ((uint32_t)0x00002000) /* Start/stop transmission command */ +#define ETH_DMAOMR_FEF ((uint32_t)0x00000080) /* Forward error frames */ +#define ETH_DMAOMR_FUGF ((uint32_t)0x00000040) /* Forward undersized good frames */ +#define ETH_DMAOMR_RTC ((uint32_t)0x00000018) /* receive threshold control */ + #define ETH_DMAOMR_RTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Receive FIFO is 64 Bytes */ + #define ETH_DMAOMR_RTC_32Bytes ((uint32_t)0x00000008) /* threshold level of the MTL Receive FIFO is 32 Bytes */ + #define ETH_DMAOMR_RTC_96Bytes ((uint32_t)0x00000010) /* threshold level of the MTL Receive FIFO is 96 Bytes */ + #define ETH_DMAOMR_RTC_128Bytes ((uint32_t)0x00000018) /* threshold level of the MTL Receive FIFO is 128 Bytes */ +#define ETH_DMAOMR_OSF ((uint32_t)0x00000004) /* operate on second frame */ +#define ETH_DMAOMR_SR ((uint32_t)0x00000002) /* Start/stop receive */ + +/* Bit definition for Ethernet DMA Interrupt Enable Register */ +#define ETH_DMAIER_NISE ((uint32_t)0x00010000) /* Normal interrupt summary enable */ +#define ETH_DMAIER_AISE ((uint32_t)0x00008000) /* Abnormal interrupt summary enable */ +#define ETH_DMAIER_ERIE ((uint32_t)0x00004000) /* Early receive interrupt enable */ +#define ETH_DMAIER_FBEIE ((uint32_t)0x00002000) /* Fatal bus error interrupt enable */ +#define ETH_DMAIER_ETIE ((uint32_t)0x00000400) /* Early transmit interrupt enable */ +#define ETH_DMAIER_RWTIE ((uint32_t)0x00000200) /* Receive watchdog timeout interrupt enable */ +#define ETH_DMAIER_RPSIE ((uint32_t)0x00000100) /* Receive process stopped interrupt enable */ +#define ETH_DMAIER_RBUIE ((uint32_t)0x00000080) /* Receive buffer unavailable interrupt enable */ +#define ETH_DMAIER_RIE ((uint32_t)0x00000040) /* Receive interrupt enable */ +#define ETH_DMAIER_TUIE ((uint32_t)0x00000020) /* Transmit Underflow interrupt enable */ +#define ETH_DMAIER_ROIE ((uint32_t)0x00000010) /* Receive Overflow interrupt enable */ +#define ETH_DMAIER_TJTIE ((uint32_t)0x00000008) /* Transmit jabber timeout interrupt enable */ +#define ETH_DMAIER_TBUIE ((uint32_t)0x00000004) /* Transmit buffer unavailable interrupt enable */ +#define ETH_DMAIER_TPSIE ((uint32_t)0x00000002) /* Transmit process stopped interrupt enable */ +#define ETH_DMAIER_TIE ((uint32_t)0x00000001) /* Transmit interrupt enable */ + +/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */ +#define ETH_DMAMFBOCR_OFOC ((uint32_t)0x10000000) /* Overflow bit for FIFO overflow counter */ +#define ETH_DMAMFBOCR_MFA ((uint32_t)0x0FFE0000) /* Number of frames missed by the application */ +#define ETH_DMAMFBOCR_OMFC ((uint32_t)0x00010000) /* Overflow bit for missed frame counter */ +#define ETH_DMAMFBOCR_MFC ((uint32_t)0x0000FFFF) /* Number of frames missed by the controller */ + +/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */ +#define ETH_DMACHTDR_HTDAP ((uint32_t)0xFFFFFFFF) /* Host transmit descriptor address pointer */ + +/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */ +#define ETH_DMACHRDR_HRDAP ((uint32_t)0xFFFFFFFF) /* Host receive descriptor address pointer */ + +/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */ +#define ETH_DMACHTBAR_HTBAP ((uint32_t)0xFFFFFFFF) /* Host transmit buffer address pointer */ + +/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */ +#define ETH_DMACHRBAR_HRBAP ((uint32_t)0xFFFFFFFF) /* Host receive buffer address pointer */ +#endif /* STM32F10X_CL */ + +/** + * @} + */ + + /** + * @} + */ + +#ifdef USE_STDPERIPH_DRIVER + #include "stm32f10x_conf.h" +#endif + +/** @addtogroup Exported_macro + * @{ + */ + +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_H */ + +/** + * @} + */ + + /** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/system_stm32f10x.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/system_stm32f10x.c new file mode 100644 index 0000000..d6875a3 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/system_stm32f10x.c @@ -0,0 +1,1094 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.c + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * factors, AHB/APBx prescalers and Flash settings). + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f10x_xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the HSI (8 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to + * configure the system clock before to branch to main program. + * + * 3. If the system clock source selected by user fails to startup, the SystemInit() + * function will do nothing and HSI still used as system clock source. User can + * add some code to deal with this issue inside the SetSysClock() function. + * + * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on + * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. + * When HSE is used as system clock source, directly or through PLL, and you + * are using different crystal you have to adapt the HSE value to your own + * configuration. + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** @addtogroup STM32F10x_System_Private_Includes + * @{ + */ + +#include "stm32f10x.h" + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Defines + * @{ + */ + +/*!< Uncomment the line corresponding to the desired System clock (SYSCLK) + frequency (after reset the HSI is used as SYSCLK source) + + IMPORTANT NOTE: + ============== + 1. After each device reset the HSI is used as System clock source. + + 2. Please make sure that the selected System clock doesn't exceed your device's + maximum frequency. + + 3. If none of the define below is enabled, the HSI is used as System clock + source. + + 4. The System clock configuration functions provided within this file assume that: + - For Low, Medium and High density Value line devices an external 8MHz + crystal is used to drive the System clock. + - For Low, Medium and High density devices an external 8MHz crystal is + used to drive the System clock. + - For Connectivity line devices an external 25MHz crystal is used to drive + the System clock. + If you are using different crystal you have to adapt those functions accordingly. + */ + +#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ + #define SYSCLK_FREQ_24MHz 24000000 +#else +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ +/* #define SYSCLK_FREQ_24MHz 24000000 */ +/* #define SYSCLK_FREQ_36MHz 36000000 */ +/* #define SYSCLK_FREQ_48MHz 48000000 */ +/* #define SYSCLK_FREQ_56MHz 56000000 */ +#define SYSCLK_FREQ_72MHz 72000000 +#endif + +/*!< Uncomment the following line if you need to use external SRAM mounted + on STM3210E-EVAL board (STM32 High density and XL-density devices) or on + STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) +/* #define DATA_IN_ExtSRAM */ +#endif + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ + + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Variables + * @{ + */ + +/******************************************************************************* +* Clock Definitions +*******************************************************************************/ +#ifdef SYSCLK_FREQ_HSE + uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_24MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_36MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */ +#else /*!< HSI Selected as System Clock source */ + uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */ +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); + +#ifdef SYSCLK_FREQ_HSE + static void SetSysClockToHSE(void); +#elif defined SYSCLK_FREQ_24MHz + static void SetSysClockTo24(void); +#elif defined SYSCLK_FREQ_36MHz + static void SetSysClockTo36(void); +#elif defined SYSCLK_FREQ_48MHz + static void SetSysClockTo48(void); +#elif defined SYSCLK_FREQ_56MHz + static void SetSysClockTo56(void); +#elif defined SYSCLK_FREQ_72MHz + static void SetSysClockTo72(void); +#endif + +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ +#ifndef STM32F10X_CL + RCC->CFGR &= (uint32_t)0xF8FF0000; +#else + RCC->CFGR &= (uint32_t)0xF0FF0000; +#endif /* STM32F10X_CL */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + +#ifdef STM32F10X_CL + /* Reset PLL2ON and PLL3ON bits */ + RCC->CR &= (uint32_t)0xEBFFFFFF; + + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x00FF0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#else + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) + #ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); + #endif /* DATA_IN_ExtSRAM */ +#endif + + /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ + /* Configure the Flash Latency cycles and enable prefetch buffer */ + SetSysClock(); + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz or 25 MHz, depedning on the product used), user has to ensure + * that HSE_VALUE is same as the real frequency of the crystal used. + * Otherwise, this function may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0; + +#ifdef STM32F10X_CL + uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + uint32_t prediv1factor = 0; +#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */ + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + +#ifndef STM32F10X_CL + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + { + #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + SystemCoreClock = (HSE_VALUE >> 1) * pllmull; + } + else + { + SystemCoreClock = HSE_VALUE * pllmull; + } + #endif + } +#else + pllmull = pllmull >> 18; + + if (pllmull != 0x0D) + { + pllmull += 2; + } + else + { /* PLL multiplication factor = PLL input clock * 6.5 */ + pllmull = 13 / 2; + } + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + {/* PREDIV1 selected as PLL clock entry */ + + /* Get PREDIV1 clock source and division factor */ + prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + + if (prediv1source == 0) + { + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + } + else + {/* PLL2 clock selected as PREDIV1 clock entry */ + + /* Get PREDIV2 division factor and PLL2 multiplication factor */ + prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; + pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; + SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; + } + } +#endif /* STM32F10X_CL */ + break; + + default: + SystemCoreClock = HSI_VALUE; + break; + } + + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * @param None + * @retval None + */ +static void SetSysClock(void) +{ +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_24MHz + SetSysClockTo24(); +#elif defined SYSCLK_FREQ_36MHz + SetSysClockTo36(); +#elif defined SYSCLK_FREQ_48MHz + SetSysClockTo48(); +#elif defined SYSCLK_FREQ_56MHz + SetSysClockTo56(); +#elif defined SYSCLK_FREQ_72MHz + SetSysClockTo72(); +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + source (default after reset) */ +} + +/** + * @brief Setup the external memory controller. Called in startup_stm32f10x.s + * before jump to __main + * @param None + * @retval None + */ +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f10x_xx.s/.c before jump to main. + * This function configures the external SRAM mounted on STM3210E-EVAL + * board (STM32 High density devices). This SRAM will be used as program + * data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is + required, then adjust the Register Addresses */ + + /* Enable FSMC clock */ + RCC->AHBENR = 0x00000114; + + /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ + RCC->APB2ENR = 0x000001E0; + +/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ +/*---------------- SRAM Address lines configuration -------------------------*/ +/*---------------- NOE and NWE configuration --------------------------------*/ +/*---------------- NE3 configuration ----------------------------------------*/ +/*---------------- NBL0, NBL1 configuration ---------------------------------*/ + + GPIOD->CRL = 0x44BB44BB; + GPIOD->CRH = 0xBBBBBBBB; + + GPIOE->CRL = 0xB44444BB; + GPIOE->CRH = 0xBBBBBBBB; + + GPIOF->CRL = 0x44BBBBBB; + GPIOF->CRH = 0xBBBB4444; + + GPIOG->CRL = 0x44BBBBBB; + GPIOG->CRH = 0x44444B44; + +/*---------------- FSMC Configuration ---------------------------------------*/ +/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ + + FSMC_Bank1->BTCR[4] = 0x00001011; + FSMC_Bank1->BTCR[5] = 0x00000200; +} +#endif /* DATA_IN_ExtSRAM */ + +#ifdef SYSCLK_FREQ_HSE +/** + * @brief Selects HSE as System clock source and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockToHSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + +#ifndef STM32F10X_CL + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#else + if (HSE_VALUE <= 24000000) + { + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; + } + else + { + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + } +#endif /* STM32F10X_CL */ +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + + /* Select HSE as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_24MHz +/** + * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo24(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL6); + + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_36MHz +/** + * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo36(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + + /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL9); + + /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + +#else + /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_48MHz +/** + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo48(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_56MHz +/** + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo56(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL7); +#else + /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7); + +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_72MHz +/** + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo72(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL9); +#else + /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | + RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/system_stm32f10x.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/system_stm32f10x.h new file mode 100644 index 0000000..54bc1ab --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/CMSIS/system_stm32f10x.h @@ -0,0 +1,98 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F10X_H +#define __SYSTEM_STM32F10X_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F10x_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F10x_System_Exported_types + * @{ + */ + +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F10X_H */ + +/** + * @} + */ + +/** + * @} + */ +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/misc.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/misc.h new file mode 100644 index 0000000..9a6bd07 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/misc.h @@ -0,0 +1,220 @@ +/** + ****************************************************************************** + * @file misc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the miscellaneous + * firmware library functions (add-on to CMSIS functions). + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MISC_H +#define __MISC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup MISC + * @{ + */ + +/** @defgroup MISC_Exported_Types + * @{ + */ + +/** + * @brief NVIC Init Structure definition + */ + +typedef struct +{ + uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled. + This parameter can be a value of @ref IRQn_Type + (For the complete STM32 Devices IRQ Channels list, please + refer to stm32f10x.h file) */ + + uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel + specified in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref NVIC_Priority_Table */ + + uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified + in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref NVIC_Priority_Table */ + + FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel + will be enabled or disabled. + This parameter can be set either to ENABLE or DISABLE */ +} NVIC_InitTypeDef; + +/** + * @} + */ + +/** @defgroup NVIC_Priority_Table + * @{ + */ + +/** +@code + The table below gives the allowed values of the pre-emption priority and subpriority according + to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function + ============================================================================================================================ + NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description + ============================================================================================================================ + NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority + | | | 4 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority + | | | 3 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority + | | | 2 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority + | | | 1 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority + | | | 0 bits for subpriority + ============================================================================================================================ +@endcode +*/ + +/** + * @} + */ + +/** @defgroup MISC_Exported_Constants + * @{ + */ + +/** @defgroup Vector_Table_Base + * @{ + */ + +#define NVIC_VectTab_RAM ((uint32_t)0x20000000) +#define NVIC_VectTab_FLASH ((uint32_t)0x08000000) +#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \ + ((VECTTAB) == NVIC_VectTab_FLASH)) +/** + * @} + */ + +/** @defgroup System_Low_Power + * @{ + */ + +#define NVIC_LP_SEVONPEND ((uint8_t)0x10) +#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04) +#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02) +#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ + ((LP) == NVIC_LP_SLEEPDEEP) || \ + ((LP) == NVIC_LP_SLEEPONEXIT)) +/** + * @} + */ + +/** @defgroup Preemption_Priority_Group + * @{ + */ + +#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ + +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \ + ((GROUP) == NVIC_PriorityGroup_1) || \ + ((GROUP) == NVIC_PriorityGroup_2) || \ + ((GROUP) == NVIC_PriorityGroup_3) || \ + ((GROUP) == NVIC_PriorityGroup_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF) + +/** + * @} + */ + +/** @defgroup SysTick_clock_source + * @{ + */ + +#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB) +#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004) +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \ + ((SOURCE) == SysTick_CLKSource_HCLK_Div8)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup MISC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Exported_Functions + * @{ + */ + +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup); +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset); +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState); +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource); + +#ifdef __cplusplus +} +#endif + +#endif /* __MISC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_adc.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_adc.h new file mode 100644 index 0000000..c465d33 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_adc.h @@ -0,0 +1,483 @@ +/** + ****************************************************************************** + * @file stm32f10x_adc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the ADC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_ADC_H +#define __STM32F10x_ADC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/** @defgroup ADC_Exported_Types + * @{ + */ + +/** + * @brief ADC Init structure definition + */ + +typedef struct +{ + uint32_t ADC_Mode; /*!< Configures the ADC to operate in independent or + dual mode. + This parameter can be a value of @ref ADC_mode */ + + FunctionalState ADC_ScanConvMode; /*!< Specifies whether the conversion is performed in + Scan (multichannels) or Single (one channel) mode. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion is performed in + Continuous or Single mode. + This parameter can be set to ENABLE or DISABLE. */ + + uint32_t ADC_ExternalTrigConv; /*!< Defines the external trigger used to start the analog + to digital conversion of regular channels. This parameter + can be a value of @ref ADC_external_trigger_sources_for_regular_channels_conversion */ + + uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment is left or right. + This parameter can be a value of @ref ADC_data_align */ + + uint8_t ADC_NbrOfChannel; /*!< Specifies the number of ADC channels that will be converted + using the sequencer for regular channel group. + This parameter must range from 1 to 16. */ +}ADC_InitTypeDef; +/** + * @} + */ + +/** @defgroup ADC_Exported_Constants + * @{ + */ + +#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \ + ((PERIPH) == ADC2) || \ + ((PERIPH) == ADC3)) + +#define IS_ADC_DMA_PERIPH(PERIPH) (((PERIPH) == ADC1) || \ + ((PERIPH) == ADC3)) + +/** @defgroup ADC_mode + * @{ + */ + +#define ADC_Mode_Independent ((uint32_t)0x00000000) +#define ADC_Mode_RegInjecSimult ((uint32_t)0x00010000) +#define ADC_Mode_RegSimult_AlterTrig ((uint32_t)0x00020000) +#define ADC_Mode_InjecSimult_FastInterl ((uint32_t)0x00030000) +#define ADC_Mode_InjecSimult_SlowInterl ((uint32_t)0x00040000) +#define ADC_Mode_InjecSimult ((uint32_t)0x00050000) +#define ADC_Mode_RegSimult ((uint32_t)0x00060000) +#define ADC_Mode_FastInterl ((uint32_t)0x00070000) +#define ADC_Mode_SlowInterl ((uint32_t)0x00080000) +#define ADC_Mode_AlterTrig ((uint32_t)0x00090000) + +#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \ + ((MODE) == ADC_Mode_RegInjecSimult) || \ + ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \ + ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \ + ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \ + ((MODE) == ADC_Mode_InjecSimult) || \ + ((MODE) == ADC_Mode_RegSimult) || \ + ((MODE) == ADC_Mode_FastInterl) || \ + ((MODE) == ADC_Mode_SlowInterl) || \ + ((MODE) == ADC_Mode_AlterTrig)) +/** + * @} + */ + +/** @defgroup ADC_external_trigger_sources_for_regular_channels_conversion + * @{ + */ + +#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x00020000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x00060000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x00080000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x000A0000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO ((uint32_t)0x000C0000) /*!< For ADC1 and ADC2 */ + +#define ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x00040000) /*!< For ADC1, ADC2 and ADC3 */ +#define ADC_ExternalTrigConv_None ((uint32_t)0x000E0000) /*!< For ADC1, ADC2 and ADC3 */ + +#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x00000000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x00020000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x00060000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x00080000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x000A0000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x000C0000) /*!< For ADC3 only */ + +#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \ + ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_None) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3)) +/** + * @} + */ + +/** @defgroup ADC_data_align + * @{ + */ + +#define ADC_DataAlign_Right ((uint32_t)0x00000000) +#define ADC_DataAlign_Left ((uint32_t)0x00000800) +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \ + ((ALIGN) == ADC_DataAlign_Left)) +/** + * @} + */ + +/** @defgroup ADC_channels + * @{ + */ + +#define ADC_Channel_0 ((uint8_t)0x00) +#define ADC_Channel_1 ((uint8_t)0x01) +#define ADC_Channel_2 ((uint8_t)0x02) +#define ADC_Channel_3 ((uint8_t)0x03) +#define ADC_Channel_4 ((uint8_t)0x04) +#define ADC_Channel_5 ((uint8_t)0x05) +#define ADC_Channel_6 ((uint8_t)0x06) +#define ADC_Channel_7 ((uint8_t)0x07) +#define ADC_Channel_8 ((uint8_t)0x08) +#define ADC_Channel_9 ((uint8_t)0x09) +#define ADC_Channel_10 ((uint8_t)0x0A) +#define ADC_Channel_11 ((uint8_t)0x0B) +#define ADC_Channel_12 ((uint8_t)0x0C) +#define ADC_Channel_13 ((uint8_t)0x0D) +#define ADC_Channel_14 ((uint8_t)0x0E) +#define ADC_Channel_15 ((uint8_t)0x0F) +#define ADC_Channel_16 ((uint8_t)0x10) +#define ADC_Channel_17 ((uint8_t)0x11) + +#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16) +#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17) + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \ + ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \ + ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \ + ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \ + ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \ + ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \ + ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \ + ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \ + ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17)) +/** + * @} + */ + +/** @defgroup ADC_sampling_time + * @{ + */ + +#define ADC_SampleTime_1Cycles5 ((uint8_t)0x00) +#define ADC_SampleTime_7Cycles5 ((uint8_t)0x01) +#define ADC_SampleTime_13Cycles5 ((uint8_t)0x02) +#define ADC_SampleTime_28Cycles5 ((uint8_t)0x03) +#define ADC_SampleTime_41Cycles5 ((uint8_t)0x04) +#define ADC_SampleTime_55Cycles5 ((uint8_t)0x05) +#define ADC_SampleTime_71Cycles5 ((uint8_t)0x06) +#define ADC_SampleTime_239Cycles5 ((uint8_t)0x07) +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \ + ((TIME) == ADC_SampleTime_7Cycles5) || \ + ((TIME) == ADC_SampleTime_13Cycles5) || \ + ((TIME) == ADC_SampleTime_28Cycles5) || \ + ((TIME) == ADC_SampleTime_41Cycles5) || \ + ((TIME) == ADC_SampleTime_55Cycles5) || \ + ((TIME) == ADC_SampleTime_71Cycles5) || \ + ((TIME) == ADC_SampleTime_239Cycles5)) +/** + * @} + */ + +/** @defgroup ADC_external_trigger_sources_for_injected_channels_conversion + * @{ + */ + +#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00002000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00003000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00004000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00005000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((uint32_t)0x00006000) /*!< For ADC1 and ADC2 */ + +#define ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00000000) /*!< For ADC1, ADC2 and ADC3 */ +#define ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00001000) /*!< For ADC1, ADC2 and ADC3 */ +#define ADC_ExternalTrigInjecConv_None ((uint32_t)0x00007000) /*!< For ADC1, ADC2 and ADC3 */ + +#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00002000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x00003000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x00004000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x00005000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x00006000) /*!< For ADC3 only */ + +#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4)) +/** + * @} + */ + +/** @defgroup ADC_injected_channel_selection + * @{ + */ + +#define ADC_InjectedChannel_1 ((uint8_t)0x14) +#define ADC_InjectedChannel_2 ((uint8_t)0x18) +#define ADC_InjectedChannel_3 ((uint8_t)0x1C) +#define ADC_InjectedChannel_4 ((uint8_t)0x20) +#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \ + ((CHANNEL) == ADC_InjectedChannel_2) || \ + ((CHANNEL) == ADC_InjectedChannel_3) || \ + ((CHANNEL) == ADC_InjectedChannel_4)) +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_selection + * @{ + */ + +#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200) +#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200) +#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200) +#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000) +#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000) +#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000) +#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000) + +#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_None)) +/** + * @} + */ + +/** @defgroup ADC_interrupts_definition + * @{ + */ + +#define ADC_IT_EOC ((uint16_t)0x0220) +#define ADC_IT_AWD ((uint16_t)0x0140) +#define ADC_IT_JEOC ((uint16_t)0x0480) + +#define IS_ADC_IT(IT) ((((IT) & (uint16_t)0xF81F) == 0x00) && ((IT) != 0x00)) + +#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \ + ((IT) == ADC_IT_JEOC)) +/** + * @} + */ + +/** @defgroup ADC_flags_definition + * @{ + */ + +#define ADC_FLAG_AWD ((uint8_t)0x01) +#define ADC_FLAG_EOC ((uint8_t)0x02) +#define ADC_FLAG_JEOC ((uint8_t)0x04) +#define ADC_FLAG_JSTRT ((uint8_t)0x08) +#define ADC_FLAG_STRT ((uint8_t)0x10) +#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xE0) == 0x00) && ((FLAG) != 0x00)) +#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \ + ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \ + ((FLAG) == ADC_FLAG_STRT)) +/** + * @} + */ + +/** @defgroup ADC_thresholds + * @{ + */ + +#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF) + +/** + * @} + */ + +/** @defgroup ADC_injected_offset + * @{ + */ + +#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF) + +/** + * @} + */ + +/** @defgroup ADC_injected_length + * @{ + */ + +#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4)) + +/** + * @} + */ + +/** @defgroup ADC_injected_rank + * @{ + */ + +#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4)) + +/** + * @} + */ + + +/** @defgroup ADC_regular_length + * @{ + */ + +#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10)) +/** + * @} + */ + +/** @defgroup ADC_regular_rank + * @{ + */ + +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10)) + +/** + * @} + */ + +/** @defgroup ADC_regular_discontinuous_mode_number + * @{ + */ + +#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions + * @{ + */ + +void ADC_DeInit(ADC_TypeDef* ADCx); +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct); +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct); +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState); +void ADC_ResetCalibration(ADC_TypeDef* ADCx); +FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx); +void ADC_StartCalibration(ADC_TypeDef* ADCx); +FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx); +void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx); +void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number); +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx); +uint32_t ADC_GetDualModeConversionValue(void); +void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv); +void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx); +void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length); +void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset); +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel); +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog); +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, uint16_t LowThreshold); +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel); +void ADC_TempSensorVrefintCmd(FunctionalState NewState); +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT); +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_ADC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_bkp.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_bkp.h new file mode 100644 index 0000000..275c5e1 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_bkp.h @@ -0,0 +1,195 @@ +/** + ****************************************************************************** + * @file stm32f10x_bkp.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the BKP firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_BKP_H +#define __STM32F10x_BKP_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup BKP + * @{ + */ + +/** @defgroup BKP_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Exported_Constants + * @{ + */ + +/** @defgroup Tamper_Pin_active_level + * @{ + */ + +#define BKP_TamperPinLevel_High ((uint16_t)0x0000) +#define BKP_TamperPinLevel_Low ((uint16_t)0x0001) +#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \ + ((LEVEL) == BKP_TamperPinLevel_Low)) +/** + * @} + */ + +/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin + * @{ + */ + +#define BKP_RTCOutputSource_None ((uint16_t)0x0000) +#define BKP_RTCOutputSource_CalibClock ((uint16_t)0x0080) +#define BKP_RTCOutputSource_Alarm ((uint16_t)0x0100) +#define BKP_RTCOutputSource_Second ((uint16_t)0x0300) +#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \ + ((SOURCE) == BKP_RTCOutputSource_CalibClock) || \ + ((SOURCE) == BKP_RTCOutputSource_Alarm) || \ + ((SOURCE) == BKP_RTCOutputSource_Second)) +/** + * @} + */ + +/** @defgroup Data_Backup_Register + * @{ + */ + +#define BKP_DR1 ((uint16_t)0x0004) +#define BKP_DR2 ((uint16_t)0x0008) +#define BKP_DR3 ((uint16_t)0x000C) +#define BKP_DR4 ((uint16_t)0x0010) +#define BKP_DR5 ((uint16_t)0x0014) +#define BKP_DR6 ((uint16_t)0x0018) +#define BKP_DR7 ((uint16_t)0x001C) +#define BKP_DR8 ((uint16_t)0x0020) +#define BKP_DR9 ((uint16_t)0x0024) +#define BKP_DR10 ((uint16_t)0x0028) +#define BKP_DR11 ((uint16_t)0x0040) +#define BKP_DR12 ((uint16_t)0x0044) +#define BKP_DR13 ((uint16_t)0x0048) +#define BKP_DR14 ((uint16_t)0x004C) +#define BKP_DR15 ((uint16_t)0x0050) +#define BKP_DR16 ((uint16_t)0x0054) +#define BKP_DR17 ((uint16_t)0x0058) +#define BKP_DR18 ((uint16_t)0x005C) +#define BKP_DR19 ((uint16_t)0x0060) +#define BKP_DR20 ((uint16_t)0x0064) +#define BKP_DR21 ((uint16_t)0x0068) +#define BKP_DR22 ((uint16_t)0x006C) +#define BKP_DR23 ((uint16_t)0x0070) +#define BKP_DR24 ((uint16_t)0x0074) +#define BKP_DR25 ((uint16_t)0x0078) +#define BKP_DR26 ((uint16_t)0x007C) +#define BKP_DR27 ((uint16_t)0x0080) +#define BKP_DR28 ((uint16_t)0x0084) +#define BKP_DR29 ((uint16_t)0x0088) +#define BKP_DR30 ((uint16_t)0x008C) +#define BKP_DR31 ((uint16_t)0x0090) +#define BKP_DR32 ((uint16_t)0x0094) +#define BKP_DR33 ((uint16_t)0x0098) +#define BKP_DR34 ((uint16_t)0x009C) +#define BKP_DR35 ((uint16_t)0x00A0) +#define BKP_DR36 ((uint16_t)0x00A4) +#define BKP_DR37 ((uint16_t)0x00A8) +#define BKP_DR38 ((uint16_t)0x00AC) +#define BKP_DR39 ((uint16_t)0x00B0) +#define BKP_DR40 ((uint16_t)0x00B4) +#define BKP_DR41 ((uint16_t)0x00B8) +#define BKP_DR42 ((uint16_t)0x00BC) + +#define IS_BKP_DR(DR) (((DR) == BKP_DR1) || ((DR) == BKP_DR2) || ((DR) == BKP_DR3) || \ + ((DR) == BKP_DR4) || ((DR) == BKP_DR5) || ((DR) == BKP_DR6) || \ + ((DR) == BKP_DR7) || ((DR) == BKP_DR8) || ((DR) == BKP_DR9) || \ + ((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \ + ((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \ + ((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \ + ((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \ + ((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \ + ((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \ + ((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \ + ((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \ + ((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \ + ((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \ + ((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42)) + +#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup BKP_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Exported_Functions + * @{ + */ + +void BKP_DeInit(void); +void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel); +void BKP_TamperPinCmd(FunctionalState NewState); +void BKP_ITConfig(FunctionalState NewState); +void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource); +void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue); +void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data); +uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR); +FlagStatus BKP_GetFlagStatus(void); +void BKP_ClearFlag(void); +ITStatus BKP_GetITStatus(void); +void BKP_ClearITPendingBit(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_BKP_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_can.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_can.h new file mode 100644 index 0000000..d185aa2 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_can.h @@ -0,0 +1,697 @@ +/** + ****************************************************************************** + * @file stm32f10x_can.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the CAN firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CAN_H +#define __STM32F10x_CAN_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CAN + * @{ + */ + +/** @defgroup CAN_Exported_Types + * @{ + */ + +#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \ + ((PERIPH) == CAN2)) + +/** + * @brief CAN init structure definition + */ + +typedef struct +{ + uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum. + It ranges from 1 to 1024. */ + + uint8_t CAN_Mode; /*!< Specifies the CAN operating mode. + This parameter can be a value of + @ref CAN_operating_mode */ + + uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta + the CAN hardware is allowed to lengthen or + shorten a bit to perform resynchronization. + This parameter can be a value of + @ref CAN_synchronisation_jump_width */ + + uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit + Segment 1. This parameter can be a value of + @ref CAN_time_quantum_in_bit_segment_1 */ + + uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit + Segment 2. + This parameter can be a value of + @ref CAN_time_quantum_in_bit_segment_2 */ + + FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered + communication mode. This parameter can be set + either to ENABLE or DISABLE. */ + + FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off + management. This parameter can be set either + to ENABLE or DISABLE. */ + + FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode. + This parameter can be set either to ENABLE or + DISABLE. */ + + FunctionalState CAN_NART; /*!< Enable or disable the no-automatic + retransmission mode. This parameter can be + set either to ENABLE or DISABLE. */ + + FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode. + This parameter can be set either to ENABLE + or DISABLE. */ + + FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority. + This parameter can be set either to ENABLE + or DISABLE. */ +} CAN_InitTypeDef; + +/** + * @brief CAN filter init structure definition + */ + +typedef struct +{ + uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit + configuration, first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit + configuration, second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, + according to the mode (MSBs for a 32-bit configuration, + first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, + according to the mode (LSBs for a 32-bit configuration, + second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. + This parameter can be a value of @ref CAN_filter_FIFO */ + + uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */ + + uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized. + This parameter can be a value of @ref CAN_filter_mode */ + + uint8_t CAN_FilterScale; /*!< Specifies the filter scale. + This parameter can be a value of @ref CAN_filter_scale */ + + FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter. + This parameter can be set either to ENABLE or DISABLE. */ +} CAN_FilterInitTypeDef; + +/** + * @brief CAN Tx message structure definition + */ + +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /*!< Specifies the type of identifier for the message that + will be transmitted. This parameter can be a value + of @ref CAN_identifier_type */ + + uint8_t RTR; /*!< Specifies the type of frame for the message that will + be transmitted. This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /*!< Specifies the length of the frame that will be + transmitted. This parameter can be a value between + 0 to 8 */ + + uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 + to 0xFF. */ +} CanTxMsg; + +/** + * @brief CAN Rx message structure definition + */ + +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /*!< Specifies the type of identifier for the message that + will be received. This parameter can be a value of + @ref CAN_identifier_type */ + + uint8_t RTR; /*!< Specifies the type of frame for the received message. + This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /*!< Specifies the length of the frame that will be received. + This parameter can be a value between 0 to 8 */ + + uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to + 0xFF. */ + + uint8_t FMI; /*!< Specifies the index of the filter the message stored in + the mailbox passes through. This parameter can be a + value between 0 to 0xFF */ +} CanRxMsg; + +/** + * @} + */ + +/** @defgroup CAN_Exported_Constants + * @{ + */ + +/** @defgroup CAN_sleep_constants + * @{ + */ + +#define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */ +#define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */ + +/** + * @} + */ + +/** @defgroup CAN_Mode + * @{ + */ + +#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */ +#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */ +#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */ +#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */ + +#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \ + ((MODE) == CAN_Mode_LoopBack)|| \ + ((MODE) == CAN_Mode_Silent) || \ + ((MODE) == CAN_Mode_Silent_LoopBack)) +/** + * @} + */ + + +/** + * @defgroup CAN_Operating_Mode + * @{ + */ +#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */ +#define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */ +#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */ + + +#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\ + ((MODE) == CAN_OperatingMode_Normal)|| \ + ((MODE) == CAN_OperatingMode_Sleep)) +/** + * @} + */ + +/** + * @defgroup CAN_Mode_Status + * @{ + */ + +#define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */ +#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */ + + +/** + * @} + */ + +/** @defgroup CAN_synchronisation_jump_width + * @{ + */ + +#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */ + +#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \ + ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq)) +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_1 + * @{ + */ + +#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */ +#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */ +#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */ +#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */ +#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */ +#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */ +#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */ +#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */ +#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */ +#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */ +#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */ +#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */ +#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */ + +#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq) +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_2 + * @{ + */ + +#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */ +#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */ +#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */ +#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */ +#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */ + +#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq) + +/** + * @} + */ + +/** @defgroup CAN_clock_prescaler + * @{ + */ + +#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) + +/** + * @} + */ + +/** @defgroup CAN_filter_number + * @{ + */ +#ifndef STM32F10X_CL + #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13) +#else + #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup CAN_filter_mode + * @{ + */ + +#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */ +#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */ + +#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \ + ((MODE) == CAN_FilterMode_IdList)) +/** + * @} + */ + +/** @defgroup CAN_filter_scale + * @{ + */ + +#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */ +#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */ + +#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \ + ((SCALE) == CAN_FilterScale_32bit)) + +/** + * @} + */ + +/** @defgroup CAN_filter_FIFO + * @{ + */ + +#define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ +#define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ +#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \ + ((FIFO) == CAN_FilterFIFO1)) +/** + * @} + */ + +/** @defgroup Start_bank_filter_for_slave_CAN + * @{ + */ +#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27)) +/** + * @} + */ + +/** @defgroup CAN_Tx + * @{ + */ + +#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) +#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF)) +#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF)) +#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) + +/** + * @} + */ + +/** @defgroup CAN_identifier_type + * @{ + */ + +#define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */ +#define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */ +#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \ + ((IDTYPE) == CAN_Id_Extended)) +/** + * @} + */ + +/** @defgroup CAN_remote_transmission_request + * @{ + */ + +#define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */ +#define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */ +#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote)) + +/** + * @} + */ + +/** @defgroup CAN_transmit_constants + * @{ + */ + +#define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */ +#define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */ +#define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */ +#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide an empty mailbox */ + +/** + * @} + */ + +/** @defgroup CAN_receive_FIFO_number_constants + * @{ + */ + +#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ +#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */ + +#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) + +/** + * @} + */ + +/** @defgroup CAN_sleep_constants + * @{ + */ + +#define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */ +#define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */ + +/** + * @} + */ + +/** @defgroup CAN_wake_up_constants + * @{ + */ + +#define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */ +#define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */ + +/** + * @} + */ + +/** + * @defgroup CAN_Error_Code_constants + * @{ + */ + +#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */ +#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */ +#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */ +#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */ +#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */ +#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */ +#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */ +#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */ + + +/** + * @} + */ + +/** @defgroup CAN_flags + * @{ + */ +/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() + and CAN_ClearFlag() functions. */ +/* If the flag is 0x1XXXXXXX, it means that it can only be used with CAN_GetFlagStatus() function. */ + +/* Transmit Flags */ +#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */ +#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */ +#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */ + +/* Receive Flags */ +#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */ +#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */ +#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */ +#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */ +#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */ +#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */ + +/* Operating Mode Flags */ +#define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */ +#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */ +/* Note: When SLAK intterupt is disabled (SLKIE=0), no polling on SLAKI is possible. + In this case the SLAK bit can be polled.*/ + +/* Error Flags */ +#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */ +#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */ +#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */ +#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */ + +#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \ + ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \ + ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \ + ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \ + ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \ + ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \ + ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \ + ((FLAG) == CAN_FLAG_SLAK )) + +#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \ + ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \ + ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\ + ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \ + ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK)) +/** + * @} + */ + + +/** @defgroup CAN_interrupts + * @{ + */ + + + +#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/ + +/* Receive Interrupts */ +#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/ +#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/ +#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/ +#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/ +#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/ +#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/ + +/* Operating Mode Interrupts */ +#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/ +#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/ + +/* Error Interrupts */ +#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/ +#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/ +#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/ +#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/ +#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/ + +/* Flags named as Interrupts : kept only for FW compatibility */ +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME + + +#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\ + ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\ + ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\ + ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ + ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ + ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ + ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) + +#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\ + ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\ + ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\ + ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ + ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ + ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) + +/** + * @} + */ + +/** @defgroup CAN_Legacy + * @{ + */ +#define CANINITFAILED CAN_InitStatus_Failed +#define CANINITOK CAN_InitStatus_Success +#define CAN_FilterFIFO0 CAN_Filter_FIFO0 +#define CAN_FilterFIFO1 CAN_Filter_FIFO1 +#define CAN_ID_STD CAN_Id_Standard +#define CAN_ID_EXT CAN_Id_Extended +#define CAN_RTR_DATA CAN_RTR_Data +#define CAN_RTR_REMOTE CAN_RTR_Remote +#define CANTXFAILE CAN_TxStatus_Failed +#define CANTXOK CAN_TxStatus_Ok +#define CANTXPENDING CAN_TxStatus_Pending +#define CAN_NO_MB CAN_TxStatus_NoMailBox +#define CANSLEEPFAILED CAN_Sleep_Failed +#define CANSLEEPOK CAN_Sleep_Ok +#define CANWAKEUPFAILED CAN_WakeUp_Failed +#define CANWAKEUPOK CAN_WakeUp_Ok + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup CAN_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Exported_Functions + * @{ + */ +/* Function used to set the CAN configuration to the default reset state *****/ +void CAN_DeInit(CAN_TypeDef* CANx); + +/* Initialization and Configuration functions *********************************/ +uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct); +void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct); +void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct); +void CAN_SlaveStartBank(uint8_t CAN_BankNumber); +void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState); +void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState); + +/* Transmit functions *********************************************************/ +uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage); +uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox); +void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox); + +/* Receive functions **********************************************************/ +void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage); +void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber); +uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber); + + +/* Operation modes functions **************************************************/ +uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode); +uint8_t CAN_Sleep(CAN_TypeDef* CANx); +uint8_t CAN_WakeUp(CAN_TypeDef* CANx); + +/* Error management functions *************************************************/ +uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx); +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx); +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx); + +/* Interrupts and flags management functions **********************************/ +void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState); +FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG); +void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG); +ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT); +void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_CAN_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_cec.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_cec.h new file mode 100644 index 0000000..7ce6896 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_cec.h @@ -0,0 +1,210 @@ +/** + ****************************************************************************** + * @file stm32f10x_cec.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the CEC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CEC_H +#define __STM32F10x_CEC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CEC + * @{ + */ + + +/** @defgroup CEC_Exported_Types + * @{ + */ + +/** + * @brief CEC Init structure definition + */ +typedef struct +{ + uint16_t CEC_BitTimingMode; /*!< Configures the CEC Bit Timing Error Mode. + This parameter can be a value of @ref CEC_BitTiming_Mode */ + uint16_t CEC_BitPeriodMode; /*!< Configures the CEC Bit Period Error Mode. + This parameter can be a value of @ref CEC_BitPeriod_Mode */ +}CEC_InitTypeDef; + +/** + * @} + */ + +/** @defgroup CEC_Exported_Constants + * @{ + */ + +/** @defgroup CEC_BitTiming_Mode + * @{ + */ +#define CEC_BitTimingStdMode ((uint16_t)0x00) /*!< Bit timing error Standard Mode */ +#define CEC_BitTimingErrFreeMode CEC_CFGR_BTEM /*!< Bit timing error Free Mode */ + +#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BitTimingStdMode) || \ + ((MODE) == CEC_BitTimingErrFreeMode)) +/** + * @} + */ + +/** @defgroup CEC_BitPeriod_Mode + * @{ + */ +#define CEC_BitPeriodStdMode ((uint16_t)0x00) /*!< Bit period error Standard Mode */ +#define CEC_BitPeriodFlexibleMode CEC_CFGR_BPEM /*!< Bit period error Flexible Mode */ + +#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BitPeriodStdMode) || \ + ((MODE) == CEC_BitPeriodFlexibleMode)) +/** + * @} + */ + + +/** @defgroup CEC_interrupts_definition + * @{ + */ +#define CEC_IT_TERR CEC_CSR_TERR +#define CEC_IT_TBTRF CEC_CSR_TBTRF +#define CEC_IT_RERR CEC_CSR_RERR +#define CEC_IT_RBTF CEC_CSR_RBTF +#define IS_CEC_GET_IT(IT) (((IT) == CEC_IT_TERR) || ((IT) == CEC_IT_TBTRF) || \ + ((IT) == CEC_IT_RERR) || ((IT) == CEC_IT_RBTF)) +/** + * @} + */ + + +/** @defgroup CEC_Own_Address + * @{ + */ +#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10) +/** + * @} + */ + +/** @defgroup CEC_Prescaler + * @{ + */ +#define IS_CEC_PRESCALER(PRESCALER) ((PRESCALER) <= 0x3FFF) + +/** + * @} + */ + +/** @defgroup CEC_flags_definition + * @{ + */ + +/** + * @brief ESR register flags + */ +#define CEC_FLAG_BTE ((uint32_t)0x10010000) +#define CEC_FLAG_BPE ((uint32_t)0x10020000) +#define CEC_FLAG_RBTFE ((uint32_t)0x10040000) +#define CEC_FLAG_SBE ((uint32_t)0x10080000) +#define CEC_FLAG_ACKE ((uint32_t)0x10100000) +#define CEC_FLAG_LINE ((uint32_t)0x10200000) +#define CEC_FLAG_TBTFE ((uint32_t)0x10400000) + +/** + * @brief CSR register flags + */ +#define CEC_FLAG_TEOM ((uint32_t)0x00000002) +#define CEC_FLAG_TERR ((uint32_t)0x00000004) +#define CEC_FLAG_TBTRF ((uint32_t)0x00000008) +#define CEC_FLAG_RSOM ((uint32_t)0x00000010) +#define CEC_FLAG_REOM ((uint32_t)0x00000020) +#define CEC_FLAG_RERR ((uint32_t)0x00000040) +#define CEC_FLAG_RBTF ((uint32_t)0x00000080) + +#define IS_CEC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFF03) == 0x00) && ((FLAG) != 0x00)) + +#define IS_CEC_GET_FLAG(FLAG) (((FLAG) == CEC_FLAG_BTE) || ((FLAG) == CEC_FLAG_BPE) || \ + ((FLAG) == CEC_FLAG_RBTFE) || ((FLAG)== CEC_FLAG_SBE) || \ + ((FLAG) == CEC_FLAG_ACKE) || ((FLAG) == CEC_FLAG_LINE) || \ + ((FLAG) == CEC_FLAG_TBTFE) || ((FLAG) == CEC_FLAG_TEOM) || \ + ((FLAG) == CEC_FLAG_TERR) || ((FLAG) == CEC_FLAG_TBTRF) || \ + ((FLAG) == CEC_FLAG_RSOM) || ((FLAG) == CEC_FLAG_REOM) || \ + ((FLAG) == CEC_FLAG_RERR) || ((FLAG) == CEC_FLAG_RBTF)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup CEC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CEC_Exported_Functions + * @{ + */ +void CEC_DeInit(void); +void CEC_Init(CEC_InitTypeDef* CEC_InitStruct); +void CEC_Cmd(FunctionalState NewState); +void CEC_ITConfig(FunctionalState NewState); +void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress); +void CEC_SetPrescaler(uint16_t CEC_Prescaler); +void CEC_SendDataByte(uint8_t Data); +uint8_t CEC_ReceiveDataByte(void); +void CEC_StartOfMessage(void); +void CEC_EndOfMessageCmd(FunctionalState NewState); +FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG); +void CEC_ClearFlag(uint32_t CEC_FLAG); +ITStatus CEC_GetITStatus(uint8_t CEC_IT); +void CEC_ClearITPendingBit(uint16_t CEC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_CEC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_crc.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_crc.h new file mode 100644 index 0000000..3362fca --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_crc.h @@ -0,0 +1,94 @@ +/** + ****************************************************************************** + * @file stm32f10x_crc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the CRC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CRC_H +#define __STM32F10x_CRC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CRC + * @{ + */ + +/** @defgroup CRC_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions + * @{ + */ + +void CRC_ResetDR(void); +uint32_t CRC_CalcCRC(uint32_t Data); +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength); +uint32_t CRC_GetCRC(void); +void CRC_SetIDRegister(uint8_t IDValue); +uint8_t CRC_GetIDRegister(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_CRC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_dac.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_dac.h new file mode 100644 index 0000000..174773c --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_dac.h @@ -0,0 +1,317 @@ +/** + ****************************************************************************** + * @file stm32f10x_dac.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the DAC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_DAC_H +#define __STM32F10x_DAC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DAC + * @{ + */ + +/** @defgroup DAC_Exported_Types + * @{ + */ + +/** + * @brief DAC Init structure definition + */ + +typedef struct +{ + uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. + This parameter can be a value of @ref DAC_trigger_selection */ + + uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves + are generated, or whether no wave is generated. + This parameter can be a value of @ref DAC_wave_generation */ + + uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or + the maximum amplitude triangle generation for the DAC channel. + This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */ + + uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. + This parameter can be a value of @ref DAC_output_buffer */ +}DAC_InitTypeDef; + +/** + * @} + */ + +/** @defgroup DAC_Exported_Constants + * @{ + */ + +/** @defgroup DAC_trigger_selection + * @{ + */ + +#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register + has been loaded, and not by external trigger */ +#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T8_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel + only in High-density devices*/ +#define DAC_Trigger_T3_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel + only in Connectivity line, Medium-density and Low-density Value Line devices */ +#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T5_TRGO ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T15_TRGO ((uint32_t)0x0000001C) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel + only in Medium-density and Low-density Value Line devices*/ +#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T4_TRGO ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */ + +#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \ + ((TRIGGER) == DAC_Trigger_T6_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T8_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T7_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T5_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T2_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T4_TRGO) || \ + ((TRIGGER) == DAC_Trigger_Ext_IT9) || \ + ((TRIGGER) == DAC_Trigger_Software)) + +/** + * @} + */ + +/** @defgroup DAC_wave_generation + * @{ + */ + +#define DAC_WaveGeneration_None ((uint32_t)0x00000000) +#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040) +#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080) +#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \ + ((WAVE) == DAC_WaveGeneration_Noise) || \ + ((WAVE) == DAC_WaveGeneration_Triangle)) +/** + * @} + */ + +/** @defgroup DAC_lfsrunmask_triangleamplitude + * @{ + */ + +#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ +#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ +#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */ +#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */ +#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */ +#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */ +#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */ +#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */ +#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */ +#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */ +#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */ +#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */ +#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */ +#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */ + +#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \ + ((VALUE) == DAC_TriangleAmplitude_1) || \ + ((VALUE) == DAC_TriangleAmplitude_3) || \ + ((VALUE) == DAC_TriangleAmplitude_7) || \ + ((VALUE) == DAC_TriangleAmplitude_15) || \ + ((VALUE) == DAC_TriangleAmplitude_31) || \ + ((VALUE) == DAC_TriangleAmplitude_63) || \ + ((VALUE) == DAC_TriangleAmplitude_127) || \ + ((VALUE) == DAC_TriangleAmplitude_255) || \ + ((VALUE) == DAC_TriangleAmplitude_511) || \ + ((VALUE) == DAC_TriangleAmplitude_1023) || \ + ((VALUE) == DAC_TriangleAmplitude_2047) || \ + ((VALUE) == DAC_TriangleAmplitude_4095)) +/** + * @} + */ + +/** @defgroup DAC_output_buffer + * @{ + */ + +#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000) +#define DAC_OutputBuffer_Disable ((uint32_t)0x00000002) +#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \ + ((STATE) == DAC_OutputBuffer_Disable)) +/** + * @} + */ + +/** @defgroup DAC_Channel_selection + * @{ + */ + +#define DAC_Channel_1 ((uint32_t)0x00000000) +#define DAC_Channel_2 ((uint32_t)0x00000010) +#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \ + ((CHANNEL) == DAC_Channel_2)) +/** + * @} + */ + +/** @defgroup DAC_data_alignment + * @{ + */ + +#define DAC_Align_12b_R ((uint32_t)0x00000000) +#define DAC_Align_12b_L ((uint32_t)0x00000004) +#define DAC_Align_8b_R ((uint32_t)0x00000008) +#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \ + ((ALIGN) == DAC_Align_12b_L) || \ + ((ALIGN) == DAC_Align_8b_R)) +/** + * @} + */ + +/** @defgroup DAC_wave_generation + * @{ + */ + +#define DAC_Wave_Noise ((uint32_t)0x00000040) +#define DAC_Wave_Triangle ((uint32_t)0x00000080) +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \ + ((WAVE) == DAC_Wave_Triangle)) +/** + * @} + */ + +/** @defgroup DAC_data + * @{ + */ + +#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) +/** + * @} + */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/** @defgroup DAC_interrupts_definition + * @{ + */ + +#define DAC_IT_DMAUDR ((uint32_t)0x00002000) +#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR)) + +/** + * @} + */ + +/** @defgroup DAC_flags_definition + * @{ + */ + +#define DAC_FLAG_DMAUDR ((uint32_t)0x00002000) +#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR)) + +/** + * @} + */ +#endif + +/** + * @} + */ + +/** @defgroup DAC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions + * @{ + */ + +void DAC_DeInit(void); +void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct); +void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct); +void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState); +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState); +#endif +void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState); +void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState); +void DAC_DualSoftwareTriggerCmd(FunctionalState NewState); +void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState); +void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data); +void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data); +void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1); +uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel); +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG); +void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG); +ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT); +void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_DAC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_dbgmcu.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_dbgmcu.h new file mode 100644 index 0000000..89ceb9a --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_dbgmcu.h @@ -0,0 +1,119 @@ +/** + ****************************************************************************** + * @file stm32f10x_dbgmcu.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the DBGMCU + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_DBGMCU_H +#define __STM32F10x_DBGMCU_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DBGMCU + * @{ + */ + +/** @defgroup DBGMCU_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Exported_Constants + * @{ + */ + +#define DBGMCU_SLEEP ((uint32_t)0x00000001) +#define DBGMCU_STOP ((uint32_t)0x00000002) +#define DBGMCU_STANDBY ((uint32_t)0x00000004) +#define DBGMCU_IWDG_STOP ((uint32_t)0x00000100) +#define DBGMCU_WWDG_STOP ((uint32_t)0x00000200) +#define DBGMCU_TIM1_STOP ((uint32_t)0x00000400) +#define DBGMCU_TIM2_STOP ((uint32_t)0x00000800) +#define DBGMCU_TIM3_STOP ((uint32_t)0x00001000) +#define DBGMCU_TIM4_STOP ((uint32_t)0x00002000) +#define DBGMCU_CAN1_STOP ((uint32_t)0x00004000) +#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000) +#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000) +#define DBGMCU_TIM8_STOP ((uint32_t)0x00020000) +#define DBGMCU_TIM5_STOP ((uint32_t)0x00040000) +#define DBGMCU_TIM6_STOP ((uint32_t)0x00080000) +#define DBGMCU_TIM7_STOP ((uint32_t)0x00100000) +#define DBGMCU_CAN2_STOP ((uint32_t)0x00200000) +#define DBGMCU_TIM15_STOP ((uint32_t)0x00400000) +#define DBGMCU_TIM16_STOP ((uint32_t)0x00800000) +#define DBGMCU_TIM17_STOP ((uint32_t)0x01000000) +#define DBGMCU_TIM12_STOP ((uint32_t)0x02000000) +#define DBGMCU_TIM13_STOP ((uint32_t)0x04000000) +#define DBGMCU_TIM14_STOP ((uint32_t)0x08000000) +#define DBGMCU_TIM9_STOP ((uint32_t)0x10000000) +#define DBGMCU_TIM10_STOP ((uint32_t)0x20000000) +#define DBGMCU_TIM11_STOP ((uint32_t)0x40000000) + +#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0x800000F8) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup DBGMCU_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Exported_Functions + * @{ + */ + +uint32_t DBGMCU_GetREVID(void); +uint32_t DBGMCU_GetDEVID(void); +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_DBGMCU_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_dma.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_dma.h new file mode 100644 index 0000000..14275fe --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_dma.h @@ -0,0 +1,439 @@ +/** + ****************************************************************************** + * @file stm32f10x_dma.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the DMA firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_DMA_H +#define __STM32F10x_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/** @defgroup DMA_Exported_Types + * @{ + */ + +/** + * @brief DMA Init structure definition + */ + +typedef struct +{ + uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx. */ + + uint32_t DMA_MemoryBaseAddr; /*!< Specifies the memory base address for DMAy Channelx. */ + + uint32_t DMA_DIR; /*!< Specifies if the peripheral is the source or destination. + This parameter can be a value of @ref DMA_data_transfer_direction */ + + uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Channel. + The data unit is equal to the configuration set in DMA_PeripheralDataSize + or DMA_MemoryDataSize members depending in the transfer direction. */ + + uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register is incremented or not. + This parameter can be a value of @ref DMA_peripheral_incremented_mode */ + + uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register is incremented or not. + This parameter can be a value of @ref DMA_memory_incremented_mode */ + + uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_peripheral_data_size */ + + uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_memory_data_size */ + + uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_circular_normal_mode. + @note: The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_priority_level */ + + uint32_t DMA_M2M; /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer. + This parameter can be a value of @ref DMA_memory_to_memory */ +}DMA_InitTypeDef; + +/** + * @} + */ + +/** @defgroup DMA_Exported_Constants + * @{ + */ + +#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \ + ((PERIPH) == DMA1_Channel2) || \ + ((PERIPH) == DMA1_Channel3) || \ + ((PERIPH) == DMA1_Channel4) || \ + ((PERIPH) == DMA1_Channel5) || \ + ((PERIPH) == DMA1_Channel6) || \ + ((PERIPH) == DMA1_Channel7) || \ + ((PERIPH) == DMA2_Channel1) || \ + ((PERIPH) == DMA2_Channel2) || \ + ((PERIPH) == DMA2_Channel3) || \ + ((PERIPH) == DMA2_Channel4) || \ + ((PERIPH) == DMA2_Channel5)) + +/** @defgroup DMA_data_transfer_direction + * @{ + */ + +#define DMA_DIR_PeripheralDST ((uint32_t)0x00000010) +#define DMA_DIR_PeripheralSRC ((uint32_t)0x00000000) +#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \ + ((DIR) == DMA_DIR_PeripheralSRC)) +/** + * @} + */ + +/** @defgroup DMA_peripheral_incremented_mode + * @{ + */ + +#define DMA_PeripheralInc_Enable ((uint32_t)0x00000040) +#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000) +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \ + ((STATE) == DMA_PeripheralInc_Disable)) +/** + * @} + */ + +/** @defgroup DMA_memory_incremented_mode + * @{ + */ + +#define DMA_MemoryInc_Enable ((uint32_t)0x00000080) +#define DMA_MemoryInc_Disable ((uint32_t)0x00000000) +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \ + ((STATE) == DMA_MemoryInc_Disable)) +/** + * @} + */ + +/** @defgroup DMA_peripheral_data_size + * @{ + */ + +#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000) +#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000100) +#define DMA_PeripheralDataSize_Word ((uint32_t)0x00000200) +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \ + ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \ + ((SIZE) == DMA_PeripheralDataSize_Word)) +/** + * @} + */ + +/** @defgroup DMA_memory_data_size + * @{ + */ + +#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000) +#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00000400) +#define DMA_MemoryDataSize_Word ((uint32_t)0x00000800) +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \ + ((SIZE) == DMA_MemoryDataSize_HalfWord) || \ + ((SIZE) == DMA_MemoryDataSize_Word)) +/** + * @} + */ + +/** @defgroup DMA_circular_normal_mode + * @{ + */ + +#define DMA_Mode_Circular ((uint32_t)0x00000020) +#define DMA_Mode_Normal ((uint32_t)0x00000000) +#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal)) +/** + * @} + */ + +/** @defgroup DMA_priority_level + * @{ + */ + +#define DMA_Priority_VeryHigh ((uint32_t)0x00003000) +#define DMA_Priority_High ((uint32_t)0x00002000) +#define DMA_Priority_Medium ((uint32_t)0x00001000) +#define DMA_Priority_Low ((uint32_t)0x00000000) +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \ + ((PRIORITY) == DMA_Priority_High) || \ + ((PRIORITY) == DMA_Priority_Medium) || \ + ((PRIORITY) == DMA_Priority_Low)) +/** + * @} + */ + +/** @defgroup DMA_memory_to_memory + * @{ + */ + +#define DMA_M2M_Enable ((uint32_t)0x00004000) +#define DMA_M2M_Disable ((uint32_t)0x00000000) +#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable)) + +/** + * @} + */ + +/** @defgroup DMA_interrupts_definition + * @{ + */ + +#define DMA_IT_TC ((uint32_t)0x00000002) +#define DMA_IT_HT ((uint32_t)0x00000004) +#define DMA_IT_TE ((uint32_t)0x00000008) +#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00)) + +#define DMA1_IT_GL1 ((uint32_t)0x00000001) +#define DMA1_IT_TC1 ((uint32_t)0x00000002) +#define DMA1_IT_HT1 ((uint32_t)0x00000004) +#define DMA1_IT_TE1 ((uint32_t)0x00000008) +#define DMA1_IT_GL2 ((uint32_t)0x00000010) +#define DMA1_IT_TC2 ((uint32_t)0x00000020) +#define DMA1_IT_HT2 ((uint32_t)0x00000040) +#define DMA1_IT_TE2 ((uint32_t)0x00000080) +#define DMA1_IT_GL3 ((uint32_t)0x00000100) +#define DMA1_IT_TC3 ((uint32_t)0x00000200) +#define DMA1_IT_HT3 ((uint32_t)0x00000400) +#define DMA1_IT_TE3 ((uint32_t)0x00000800) +#define DMA1_IT_GL4 ((uint32_t)0x00001000) +#define DMA1_IT_TC4 ((uint32_t)0x00002000) +#define DMA1_IT_HT4 ((uint32_t)0x00004000) +#define DMA1_IT_TE4 ((uint32_t)0x00008000) +#define DMA1_IT_GL5 ((uint32_t)0x00010000) +#define DMA1_IT_TC5 ((uint32_t)0x00020000) +#define DMA1_IT_HT5 ((uint32_t)0x00040000) +#define DMA1_IT_TE5 ((uint32_t)0x00080000) +#define DMA1_IT_GL6 ((uint32_t)0x00100000) +#define DMA1_IT_TC6 ((uint32_t)0x00200000) +#define DMA1_IT_HT6 ((uint32_t)0x00400000) +#define DMA1_IT_TE6 ((uint32_t)0x00800000) +#define DMA1_IT_GL7 ((uint32_t)0x01000000) +#define DMA1_IT_TC7 ((uint32_t)0x02000000) +#define DMA1_IT_HT7 ((uint32_t)0x04000000) +#define DMA1_IT_TE7 ((uint32_t)0x08000000) + +#define DMA2_IT_GL1 ((uint32_t)0x10000001) +#define DMA2_IT_TC1 ((uint32_t)0x10000002) +#define DMA2_IT_HT1 ((uint32_t)0x10000004) +#define DMA2_IT_TE1 ((uint32_t)0x10000008) +#define DMA2_IT_GL2 ((uint32_t)0x10000010) +#define DMA2_IT_TC2 ((uint32_t)0x10000020) +#define DMA2_IT_HT2 ((uint32_t)0x10000040) +#define DMA2_IT_TE2 ((uint32_t)0x10000080) +#define DMA2_IT_GL3 ((uint32_t)0x10000100) +#define DMA2_IT_TC3 ((uint32_t)0x10000200) +#define DMA2_IT_HT3 ((uint32_t)0x10000400) +#define DMA2_IT_TE3 ((uint32_t)0x10000800) +#define DMA2_IT_GL4 ((uint32_t)0x10001000) +#define DMA2_IT_TC4 ((uint32_t)0x10002000) +#define DMA2_IT_HT4 ((uint32_t)0x10004000) +#define DMA2_IT_TE4 ((uint32_t)0x10008000) +#define DMA2_IT_GL5 ((uint32_t)0x10010000) +#define DMA2_IT_TC5 ((uint32_t)0x10020000) +#define DMA2_IT_HT5 ((uint32_t)0x10040000) +#define DMA2_IT_TE5 ((uint32_t)0x10080000) + +#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00)) + +#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \ + ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \ + ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \ + ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \ + ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \ + ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \ + ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \ + ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \ + ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \ + ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \ + ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \ + ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \ + ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \ + ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \ + ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \ + ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \ + ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \ + ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \ + ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \ + ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \ + ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \ + ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \ + ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \ + ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5)) + +/** + * @} + */ + +/** @defgroup DMA_flags_definition + * @{ + */ +#define DMA1_FLAG_GL1 ((uint32_t)0x00000001) +#define DMA1_FLAG_TC1 ((uint32_t)0x00000002) +#define DMA1_FLAG_HT1 ((uint32_t)0x00000004) +#define DMA1_FLAG_TE1 ((uint32_t)0x00000008) +#define DMA1_FLAG_GL2 ((uint32_t)0x00000010) +#define DMA1_FLAG_TC2 ((uint32_t)0x00000020) +#define DMA1_FLAG_HT2 ((uint32_t)0x00000040) +#define DMA1_FLAG_TE2 ((uint32_t)0x00000080) +#define DMA1_FLAG_GL3 ((uint32_t)0x00000100) +#define DMA1_FLAG_TC3 ((uint32_t)0x00000200) +#define DMA1_FLAG_HT3 ((uint32_t)0x00000400) +#define DMA1_FLAG_TE3 ((uint32_t)0x00000800) +#define DMA1_FLAG_GL4 ((uint32_t)0x00001000) +#define DMA1_FLAG_TC4 ((uint32_t)0x00002000) +#define DMA1_FLAG_HT4 ((uint32_t)0x00004000) +#define DMA1_FLAG_TE4 ((uint32_t)0x00008000) +#define DMA1_FLAG_GL5 ((uint32_t)0x00010000) +#define DMA1_FLAG_TC5 ((uint32_t)0x00020000) +#define DMA1_FLAG_HT5 ((uint32_t)0x00040000) +#define DMA1_FLAG_TE5 ((uint32_t)0x00080000) +#define DMA1_FLAG_GL6 ((uint32_t)0x00100000) +#define DMA1_FLAG_TC6 ((uint32_t)0x00200000) +#define DMA1_FLAG_HT6 ((uint32_t)0x00400000) +#define DMA1_FLAG_TE6 ((uint32_t)0x00800000) +#define DMA1_FLAG_GL7 ((uint32_t)0x01000000) +#define DMA1_FLAG_TC7 ((uint32_t)0x02000000) +#define DMA1_FLAG_HT7 ((uint32_t)0x04000000) +#define DMA1_FLAG_TE7 ((uint32_t)0x08000000) + +#define DMA2_FLAG_GL1 ((uint32_t)0x10000001) +#define DMA2_FLAG_TC1 ((uint32_t)0x10000002) +#define DMA2_FLAG_HT1 ((uint32_t)0x10000004) +#define DMA2_FLAG_TE1 ((uint32_t)0x10000008) +#define DMA2_FLAG_GL2 ((uint32_t)0x10000010) +#define DMA2_FLAG_TC2 ((uint32_t)0x10000020) +#define DMA2_FLAG_HT2 ((uint32_t)0x10000040) +#define DMA2_FLAG_TE2 ((uint32_t)0x10000080) +#define DMA2_FLAG_GL3 ((uint32_t)0x10000100) +#define DMA2_FLAG_TC3 ((uint32_t)0x10000200) +#define DMA2_FLAG_HT3 ((uint32_t)0x10000400) +#define DMA2_FLAG_TE3 ((uint32_t)0x10000800) +#define DMA2_FLAG_GL4 ((uint32_t)0x10001000) +#define DMA2_FLAG_TC4 ((uint32_t)0x10002000) +#define DMA2_FLAG_HT4 ((uint32_t)0x10004000) +#define DMA2_FLAG_TE4 ((uint32_t)0x10008000) +#define DMA2_FLAG_GL5 ((uint32_t)0x10010000) +#define DMA2_FLAG_TC5 ((uint32_t)0x10020000) +#define DMA2_FLAG_HT5 ((uint32_t)0x10040000) +#define DMA2_FLAG_TE5 ((uint32_t)0x10080000) + +#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00)) + +#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \ + ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \ + ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \ + ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \ + ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \ + ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \ + ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \ + ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \ + ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \ + ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \ + ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \ + ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \ + ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \ + ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \ + ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \ + ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \ + ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \ + ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \ + ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \ + ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \ + ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \ + ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \ + ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \ + ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5)) +/** + * @} + */ + +/** @defgroup DMA_Buffer_Size + * @{ + */ + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup DMA_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions + * @{ + */ + +void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx); +void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct); +void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct); +void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState); +void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState); +void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber); +uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx); +FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG); +void DMA_ClearFlag(uint32_t DMAy_FLAG); +ITStatus DMA_GetITStatus(uint32_t DMAy_IT); +void DMA_ClearITPendingBit(uint32_t DMAy_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_DMA_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_exti.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_exti.h new file mode 100644 index 0000000..bb9d7f6 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_exti.h @@ -0,0 +1,184 @@ +/** + ****************************************************************************** + * @file stm32f10x_exti.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the EXTI firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_EXTI_H +#define __STM32F10x_EXTI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ + +/** @defgroup EXTI_Exported_Types + * @{ + */ + +/** + * @brief EXTI mode enumeration + */ + +typedef enum +{ + EXTI_Mode_Interrupt = 0x00, + EXTI_Mode_Event = 0x04 +}EXTIMode_TypeDef; + +#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event)) + +/** + * @brief EXTI Trigger enumeration + */ + +typedef enum +{ + EXTI_Trigger_Rising = 0x08, + EXTI_Trigger_Falling = 0x0C, + EXTI_Trigger_Rising_Falling = 0x10 +}EXTITrigger_TypeDef; + +#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \ + ((TRIGGER) == EXTI_Trigger_Falling) || \ + ((TRIGGER) == EXTI_Trigger_Rising_Falling)) +/** + * @brief EXTI Init Structure definition + */ + +typedef struct +{ + uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled. + This parameter can be any combination of @ref EXTI_Lines */ + + EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTIMode_TypeDef */ + + EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTIMode_TypeDef */ + + FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ +}EXTI_InitTypeDef; + +/** + * @} + */ + +/** @defgroup EXTI_Exported_Constants + * @{ + */ + +/** @defgroup EXTI_Lines + * @{ + */ + +#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */ +#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */ +#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */ +#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */ +#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */ +#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */ +#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */ +#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */ +#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */ +#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */ +#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */ +#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */ +#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */ +#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */ +#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */ +#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */ +#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */ +#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */ +#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB Device/USB OTG FS + Wakeup from suspend event */ +#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ + +#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFFF00000) == 0x00) && ((LINE) != (uint16_t)0x00)) +#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \ + ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \ + ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \ + ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \ + ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \ + ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \ + ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \ + ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \ + ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \ + ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19)) + + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup EXTI_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions + * @{ + */ + +void EXTI_DeInit(void); +void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct); +void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct); +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line); +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line); +void EXTI_ClearFlag(uint32_t EXTI_Line); +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line); +void EXTI_ClearITPendingBit(uint32_t EXTI_Line); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_EXTI_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_flash.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_flash.h new file mode 100644 index 0000000..63720de --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_flash.h @@ -0,0 +1,426 @@ +/** + ****************************************************************************** + * @file stm32f10x_flash.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the FLASH + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_FLASH_H +#define __STM32F10x_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @defgroup FLASH_Exported_Types + * @{ + */ + +/** + * @brief FLASH Status + */ + +typedef enum +{ + FLASH_BUSY = 1, + FLASH_ERROR_PG, + FLASH_ERROR_WRP, + FLASH_COMPLETE, + FLASH_TIMEOUT +}FLASH_Status; + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Constants + * @{ + */ + +/** @defgroup Flash_Latency + * @{ + */ + +#define FLASH_Latency_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */ +#define FLASH_Latency_1 ((uint32_t)0x00000001) /*!< FLASH One Latency cycle */ +#define FLASH_Latency_2 ((uint32_t)0x00000002) /*!< FLASH Two Latency cycles */ +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \ + ((LATENCY) == FLASH_Latency_1) || \ + ((LATENCY) == FLASH_Latency_2)) +/** + * @} + */ + +/** @defgroup Half_Cycle_Enable_Disable + * @{ + */ + +#define FLASH_HalfCycleAccess_Enable ((uint32_t)0x00000008) /*!< FLASH Half Cycle Enable */ +#define FLASH_HalfCycleAccess_Disable ((uint32_t)0x00000000) /*!< FLASH Half Cycle Disable */ +#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \ + ((STATE) == FLASH_HalfCycleAccess_Disable)) +/** + * @} + */ + +/** @defgroup Prefetch_Buffer_Enable_Disable + * @{ + */ + +#define FLASH_PrefetchBuffer_Enable ((uint32_t)0x00000010) /*!< FLASH Prefetch Buffer Enable */ +#define FLASH_PrefetchBuffer_Disable ((uint32_t)0x00000000) /*!< FLASH Prefetch Buffer Disable */ +#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \ + ((STATE) == FLASH_PrefetchBuffer_Disable)) +/** + * @} + */ + +/** @defgroup Option_Bytes_Write_Protection + * @{ + */ + +/* Values to be used with STM32 Low and Medium density devices */ +#define FLASH_WRProt_Pages0to3 ((uint32_t)0x00000001) /*!< STM32 Low and Medium density devices: Write protection of page 0 to 3 */ +#define FLASH_WRProt_Pages4to7 ((uint32_t)0x00000002) /*!< STM32 Low and Medium density devices: Write protection of page 4 to 7 */ +#define FLASH_WRProt_Pages8to11 ((uint32_t)0x00000004) /*!< STM32 Low and Medium density devices: Write protection of page 8 to 11 */ +#define FLASH_WRProt_Pages12to15 ((uint32_t)0x00000008) /*!< STM32 Low and Medium density devices: Write protection of page 12 to 15 */ +#define FLASH_WRProt_Pages16to19 ((uint32_t)0x00000010) /*!< STM32 Low and Medium density devices: Write protection of page 16 to 19 */ +#define FLASH_WRProt_Pages20to23 ((uint32_t)0x00000020) /*!< STM32 Low and Medium density devices: Write protection of page 20 to 23 */ +#define FLASH_WRProt_Pages24to27 ((uint32_t)0x00000040) /*!< STM32 Low and Medium density devices: Write protection of page 24 to 27 */ +#define FLASH_WRProt_Pages28to31 ((uint32_t)0x00000080) /*!< STM32 Low and Medium density devices: Write protection of page 28 to 31 */ + +/* Values to be used with STM32 Medium-density devices */ +#define FLASH_WRProt_Pages32to35 ((uint32_t)0x00000100) /*!< STM32 Medium-density devices: Write protection of page 32 to 35 */ +#define FLASH_WRProt_Pages36to39 ((uint32_t)0x00000200) /*!< STM32 Medium-density devices: Write protection of page 36 to 39 */ +#define FLASH_WRProt_Pages40to43 ((uint32_t)0x00000400) /*!< STM32 Medium-density devices: Write protection of page 40 to 43 */ +#define FLASH_WRProt_Pages44to47 ((uint32_t)0x00000800) /*!< STM32 Medium-density devices: Write protection of page 44 to 47 */ +#define FLASH_WRProt_Pages48to51 ((uint32_t)0x00001000) /*!< STM32 Medium-density devices: Write protection of page 48 to 51 */ +#define FLASH_WRProt_Pages52to55 ((uint32_t)0x00002000) /*!< STM32 Medium-density devices: Write protection of page 52 to 55 */ +#define FLASH_WRProt_Pages56to59 ((uint32_t)0x00004000) /*!< STM32 Medium-density devices: Write protection of page 56 to 59 */ +#define FLASH_WRProt_Pages60to63 ((uint32_t)0x00008000) /*!< STM32 Medium-density devices: Write protection of page 60 to 63 */ +#define FLASH_WRProt_Pages64to67 ((uint32_t)0x00010000) /*!< STM32 Medium-density devices: Write protection of page 64 to 67 */ +#define FLASH_WRProt_Pages68to71 ((uint32_t)0x00020000) /*!< STM32 Medium-density devices: Write protection of page 68 to 71 */ +#define FLASH_WRProt_Pages72to75 ((uint32_t)0x00040000) /*!< STM32 Medium-density devices: Write protection of page 72 to 75 */ +#define FLASH_WRProt_Pages76to79 ((uint32_t)0x00080000) /*!< STM32 Medium-density devices: Write protection of page 76 to 79 */ +#define FLASH_WRProt_Pages80to83 ((uint32_t)0x00100000) /*!< STM32 Medium-density devices: Write protection of page 80 to 83 */ +#define FLASH_WRProt_Pages84to87 ((uint32_t)0x00200000) /*!< STM32 Medium-density devices: Write protection of page 84 to 87 */ +#define FLASH_WRProt_Pages88to91 ((uint32_t)0x00400000) /*!< STM32 Medium-density devices: Write protection of page 88 to 91 */ +#define FLASH_WRProt_Pages92to95 ((uint32_t)0x00800000) /*!< STM32 Medium-density devices: Write protection of page 92 to 95 */ +#define FLASH_WRProt_Pages96to99 ((uint32_t)0x01000000) /*!< STM32 Medium-density devices: Write protection of page 96 to 99 */ +#define FLASH_WRProt_Pages100to103 ((uint32_t)0x02000000) /*!< STM32 Medium-density devices: Write protection of page 100 to 103 */ +#define FLASH_WRProt_Pages104to107 ((uint32_t)0x04000000) /*!< STM32 Medium-density devices: Write protection of page 104 to 107 */ +#define FLASH_WRProt_Pages108to111 ((uint32_t)0x08000000) /*!< STM32 Medium-density devices: Write protection of page 108 to 111 */ +#define FLASH_WRProt_Pages112to115 ((uint32_t)0x10000000) /*!< STM32 Medium-density devices: Write protection of page 112 to 115 */ +#define FLASH_WRProt_Pages116to119 ((uint32_t)0x20000000) /*!< STM32 Medium-density devices: Write protection of page 115 to 119 */ +#define FLASH_WRProt_Pages120to123 ((uint32_t)0x40000000) /*!< STM32 Medium-density devices: Write protection of page 120 to 123 */ +#define FLASH_WRProt_Pages124to127 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 124 to 127 */ + +/* Values to be used with STM32 High-density and STM32F10X Connectivity line devices */ +#define FLASH_WRProt_Pages0to1 ((uint32_t)0x00000001) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 0 to 1 */ +#define FLASH_WRProt_Pages2to3 ((uint32_t)0x00000002) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 2 to 3 */ +#define FLASH_WRProt_Pages4to5 ((uint32_t)0x00000004) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 4 to 5 */ +#define FLASH_WRProt_Pages6to7 ((uint32_t)0x00000008) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 6 to 7 */ +#define FLASH_WRProt_Pages8to9 ((uint32_t)0x00000010) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 8 to 9 */ +#define FLASH_WRProt_Pages10to11 ((uint32_t)0x00000020) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 10 to 11 */ +#define FLASH_WRProt_Pages12to13 ((uint32_t)0x00000040) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 12 to 13 */ +#define FLASH_WRProt_Pages14to15 ((uint32_t)0x00000080) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 14 to 15 */ +#define FLASH_WRProt_Pages16to17 ((uint32_t)0x00000100) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 16 to 17 */ +#define FLASH_WRProt_Pages18to19 ((uint32_t)0x00000200) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 18 to 19 */ +#define FLASH_WRProt_Pages20to21 ((uint32_t)0x00000400) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 20 to 21 */ +#define FLASH_WRProt_Pages22to23 ((uint32_t)0x00000800) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 22 to 23 */ +#define FLASH_WRProt_Pages24to25 ((uint32_t)0x00001000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 24 to 25 */ +#define FLASH_WRProt_Pages26to27 ((uint32_t)0x00002000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 26 to 27 */ +#define FLASH_WRProt_Pages28to29 ((uint32_t)0x00004000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 28 to 29 */ +#define FLASH_WRProt_Pages30to31 ((uint32_t)0x00008000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 30 to 31 */ +#define FLASH_WRProt_Pages32to33 ((uint32_t)0x00010000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 32 to 33 */ +#define FLASH_WRProt_Pages34to35 ((uint32_t)0x00020000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 34 to 35 */ +#define FLASH_WRProt_Pages36to37 ((uint32_t)0x00040000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 36 to 37 */ +#define FLASH_WRProt_Pages38to39 ((uint32_t)0x00080000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 38 to 39 */ +#define FLASH_WRProt_Pages40to41 ((uint32_t)0x00100000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 40 to 41 */ +#define FLASH_WRProt_Pages42to43 ((uint32_t)0x00200000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 42 to 43 */ +#define FLASH_WRProt_Pages44to45 ((uint32_t)0x00400000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 44 to 45 */ +#define FLASH_WRProt_Pages46to47 ((uint32_t)0x00800000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 46 to 47 */ +#define FLASH_WRProt_Pages48to49 ((uint32_t)0x01000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 48 to 49 */ +#define FLASH_WRProt_Pages50to51 ((uint32_t)0x02000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 50 to 51 */ +#define FLASH_WRProt_Pages52to53 ((uint32_t)0x04000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 52 to 53 */ +#define FLASH_WRProt_Pages54to55 ((uint32_t)0x08000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 54 to 55 */ +#define FLASH_WRProt_Pages56to57 ((uint32_t)0x10000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 56 to 57 */ +#define FLASH_WRProt_Pages58to59 ((uint32_t)0x20000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 58 to 59 */ +#define FLASH_WRProt_Pages60to61 ((uint32_t)0x40000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 60 to 61 */ +#define FLASH_WRProt_Pages62to127 ((uint32_t)0x80000000) /*!< STM32 Connectivity line devices: Write protection of page 62 to 127 */ +#define FLASH_WRProt_Pages62to255 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 62 to 255 */ +#define FLASH_WRProt_Pages62to511 ((uint32_t)0x80000000) /*!< STM32 XL-density devices: Write protection of page 62 to 511 */ + +#define FLASH_WRProt_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */ + +#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000)) + +#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF)) + +#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_IWatchdog + * @{ + */ + +#define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */ +#define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */ +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_nRST_STOP + * @{ + */ + +#define OB_STOP_NoRST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */ +#define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */ +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_nRST_STDBY + * @{ + */ + +#define OB_STDBY_NoRST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */ +#define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */ +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST)) + +#ifdef STM32F10X_XL +/** + * @} + */ +/** @defgroup FLASH_Boot + * @{ + */ +#define FLASH_BOOT_Bank1 ((uint16_t)0x0000) /*!< At startup, if boot pins are set in boot from user Flash position + and this parameter is selected the device will boot from Bank1(Default) */ +#define FLASH_BOOT_Bank2 ((uint16_t)0x0001) /*!< At startup, if boot pins are set in boot from user Flash position + and this parameter is selected the device will boot from Bank 2 or Bank 1, + depending on the activation of the bank */ +#define IS_FLASH_BOOT(BOOT) (((BOOT) == FLASH_BOOT_Bank1) || ((BOOT) == FLASH_BOOT_Bank2)) +#endif +/** + * @} + */ +/** @defgroup FLASH_Interrupts + * @{ + */ +#ifdef STM32F10X_XL +#define FLASH_IT_BANK2_ERROR ((uint32_t)0x80000400) /*!< FPEC BANK2 error interrupt source */ +#define FLASH_IT_BANK2_EOP ((uint32_t)0x80001000) /*!< End of FLASH BANK2 Operation Interrupt source */ + +#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */ +#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */ + +#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC BANK1 error interrupt source */ +#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH BANK1 Operation Interrupt source */ +#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0x7FFFEBFF) == 0x00000000) && (((IT) != 0x00000000))) +#else +#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC error interrupt source */ +#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH Operation Interrupt source */ +#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */ +#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */ + +#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000))) +#endif + +/** + * @} + */ + +/** @defgroup FLASH_Flags + * @{ + */ +#ifdef STM32F10X_XL +#define FLASH_FLAG_BANK2_BSY ((uint32_t)0x80000001) /*!< FLASH BANK2 Busy flag */ +#define FLASH_FLAG_BANK2_EOP ((uint32_t)0x80000020) /*!< FLASH BANK2 End of Operation flag */ +#define FLASH_FLAG_BANK2_PGERR ((uint32_t)0x80000004) /*!< FLASH BANK2 Program error flag */ +#define FLASH_FLAG_BANK2_WRPRTERR ((uint32_t)0x80000010) /*!< FLASH BANK2 Write protected error flag */ + +#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/ +#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */ +#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */ +#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */ + +#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */ +#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */ +#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */ +#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */ + +#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0x7FFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000)) +#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ + ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_OPTERR)|| \ + ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \ + ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_BANK2_BSY) || ((FLAG) == FLASH_FLAG_BANK2_EOP) || \ + ((FLAG) == FLASH_FLAG_BANK2_PGERR) || ((FLAG) == FLASH_FLAG_BANK2_WRPRTERR)) +#else +#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */ +#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */ +#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */ +#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */ + +#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/ +#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */ +#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */ +#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */ + +#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000)) +#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ + ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \ + ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_OPTERR)) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions + * @{ + */ + +/*------------ Functions used for all STM32F10x devices -----*/ +void FLASH_SetLatency(uint32_t FLASH_Latency); +void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess); +void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer); +void FLASH_Unlock(void); +void FLASH_Lock(void); +FLASH_Status FLASH_ErasePage(uint32_t Page_Address); +FLASH_Status FLASH_EraseAllPages(void); +FLASH_Status FLASH_EraseOptionBytes(void); +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data); +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data); +FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data); +FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages); +FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState); +FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY); +uint32_t FLASH_GetUserOptionByte(void); +uint32_t FLASH_GetWriteProtectionOptionByte(void); +FlagStatus FLASH_GetReadOutProtectionStatus(void); +FlagStatus FLASH_GetPrefetchBufferStatus(void); +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState); +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG); +void FLASH_ClearFlag(uint32_t FLASH_FLAG); +FLASH_Status FLASH_GetStatus(void); +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout); + +/*------------ New function used for all STM32F10x devices -----*/ +void FLASH_UnlockBank1(void); +void FLASH_LockBank1(void); +FLASH_Status FLASH_EraseAllBank1Pages(void); +FLASH_Status FLASH_GetBank1Status(void); +FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout); + +#ifdef STM32F10X_XL +/*---- New Functions used only with STM32F10x_XL density devices -----*/ +void FLASH_UnlockBank2(void); +void FLASH_LockBank2(void); +FLASH_Status FLASH_EraseAllBank2Pages(void); +FLASH_Status FLASH_GetBank2Status(void); +FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout); +FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_FLASH_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_fsmc.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_fsmc.h new file mode 100644 index 0000000..6e1769d --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_fsmc.h @@ -0,0 +1,733 @@ +/** + ****************************************************************************** + * @file stm32f10x_fsmc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the FSMC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_FSMC_H +#define __STM32F10x_FSMC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FSMC + * @{ + */ + +/** @defgroup FSMC_Exported_Types + * @{ + */ + +/** + * @brief Timing parameters For NOR/SRAM Banks + */ + +typedef struct +{ + uint32_t FSMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address setup time. + This parameter can be a value between 0 and 0xF. + @note: It is not used with synchronous NOR Flash memories. */ + + uint32_t FSMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address hold time. + This parameter can be a value between 0 and 0xF. + @note: It is not used with synchronous NOR Flash memories.*/ + + uint32_t FSMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the data setup time. + This parameter can be a value between 0 and 0xFF. + @note: It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */ + + uint32_t FSMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure + the duration of the bus turnaround. + This parameter can be a value between 0 and 0xF. + @note: It is only used for multiplexed NOR Flash memories. */ + + uint32_t FSMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles. + This parameter can be a value between 1 and 0xF. + @note: This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */ + + uint32_t FSMC_DataLatency; /*!< Defines the number of memory clock cycles to issue + to the memory before getting the first data. + The value of this parameter depends on the memory type as shown below: + - It must be set to 0 in case of a CRAM + - It is don't care in asynchronous NOR, SRAM or ROM accesses + - It may assume a value between 0 and 0xF in NOR Flash memories + with synchronous burst mode enable */ + + uint32_t FSMC_AccessMode; /*!< Specifies the asynchronous access mode. + This parameter can be a value of @ref FSMC_Access_Mode */ +}FSMC_NORSRAMTimingInitTypeDef; + +/** + * @brief FSMC NOR/SRAM Init structure definition + */ + +typedef struct +{ + uint32_t FSMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used. + This parameter can be a value of @ref FSMC_NORSRAM_Bank */ + + uint32_t FSMC_DataAddressMux; /*!< Specifies whether the address and data values are + multiplexed on the databus or not. + This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */ + + uint32_t FSMC_MemoryType; /*!< Specifies the type of external memory attached to + the corresponding memory bank. + This parameter can be a value of @ref FSMC_Memory_Type */ + + uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be a value of @ref FSMC_Data_Width */ + + uint32_t FSMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, + valid only with synchronous burst Flash memories. + This parameter can be a value of @ref FSMC_Burst_Access_Mode */ + + uint32_t FSMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, + valid only with asynchronous Flash memories. + This parameter can be a value of @ref FSMC_AsynchronousWait */ + + uint32_t FSMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing + the Flash memory in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */ + + uint32_t FSMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash + memory, valid only when accessing Flash memories in burst mode. + This parameter can be a value of @ref FSMC_Wrap_Mode */ + + uint32_t FSMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one + clock cycle before the wait state or during the wait state, + valid only when accessing memories in burst mode. + This parameter can be a value of @ref FSMC_Wait_Timing */ + + uint32_t FSMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FSMC. + This parameter can be a value of @ref FSMC_Write_Operation */ + + uint32_t FSMC_WaitSignal; /*!< Enables or disables the wait-state insertion via wait + signal, valid for Flash memory access in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal */ + + uint32_t FSMC_ExtendedMode; /*!< Enables or disables the extended mode. + This parameter can be a value of @ref FSMC_Extended_Mode */ + + uint32_t FSMC_WriteBurst; /*!< Enables or disables the write burst operation. + This parameter can be a value of @ref FSMC_Write_Burst */ + + FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the ExtendedMode is not used*/ + + FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; /*!< Timing Parameters for write access if the ExtendedMode is used*/ +}FSMC_NORSRAMInitTypeDef; + +/** + * @brief Timing parameters For FSMC NAND and PCCARD Banks + */ + +typedef struct +{ + uint32_t FSMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before + the command assertion for NAND-Flash read or write access + to common/Attribute or I/O memory space (depending on + the memory space timing to be configured). + This parameter can be a value between 0 and 0xFF.*/ + + uint32_t FSMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the + command for NAND-Flash read or write access to + common/Attribute or I/O memory space (depending on the + memory space timing to be configured). + This parameter can be a number between 0x00 and 0xFF */ + + uint32_t FSMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address + (and data for write access) after the command deassertion + for NAND-Flash read or write access to common/Attribute + or I/O memory space (depending on the memory space timing + to be configured). + This parameter can be a number between 0x00 and 0xFF */ + + uint32_t FSMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the + databus is kept in HiZ after the start of a NAND-Flash + write access to common/Attribute or I/O memory space (depending + on the memory space timing to be configured). + This parameter can be a number between 0x00 and 0xFF */ +}FSMC_NAND_PCCARDTimingInitTypeDef; + +/** + * @brief FSMC NAND Init structure definition + */ + +typedef struct +{ + uint32_t FSMC_Bank; /*!< Specifies the NAND memory bank that will be used. + This parameter can be a value of @ref FSMC_NAND_Bank */ + + uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank. + This parameter can be any value of @ref FSMC_Wait_feature */ + + uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be any value of @ref FSMC_Data_Width */ + + uint32_t FSMC_ECC; /*!< Enables or disables the ECC computation. + This parameter can be any value of @ref FSMC_ECC */ + + uint32_t FSMC_ECCPageSize; /*!< Defines the page size for the extended ECC. + This parameter can be any value of @ref FSMC_ECC_Page_Size */ + + uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between 0 and 0xFF. */ + + uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between 0x0 and 0xFF */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */ +}FSMC_NANDInitTypeDef; + +/** + * @brief FSMC PCCARD Init structure definition + */ + +typedef struct +{ + uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank. + This parameter can be any value of @ref FSMC_Wait_feature */ + + uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between 0 and 0xFF. */ + + uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between 0x0 and 0xFF */ + + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */ +}FSMC_PCCARDInitTypeDef; + +/** + * @} + */ + +/** @defgroup FSMC_Exported_Constants + * @{ + */ + +/** @defgroup FSMC_NORSRAM_Bank + * @{ + */ +#define FSMC_Bank1_NORSRAM1 ((uint32_t)0x00000000) +#define FSMC_Bank1_NORSRAM2 ((uint32_t)0x00000002) +#define FSMC_Bank1_NORSRAM3 ((uint32_t)0x00000004) +#define FSMC_Bank1_NORSRAM4 ((uint32_t)0x00000006) +/** + * @} + */ + +/** @defgroup FSMC_NAND_Bank + * @{ + */ +#define FSMC_Bank2_NAND ((uint32_t)0x00000010) +#define FSMC_Bank3_NAND ((uint32_t)0x00000100) +/** + * @} + */ + +/** @defgroup FSMC_PCCARD_Bank + * @{ + */ +#define FSMC_Bank4_PCCARD ((uint32_t)0x00001000) +/** + * @} + */ + +#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \ + ((BANK) == FSMC_Bank1_NORSRAM2) || \ + ((BANK) == FSMC_Bank1_NORSRAM3) || \ + ((BANK) == FSMC_Bank1_NORSRAM4)) + +#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ + ((BANK) == FSMC_Bank3_NAND)) + +#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ + ((BANK) == FSMC_Bank3_NAND) || \ + ((BANK) == FSMC_Bank4_PCCARD)) + +#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ + ((BANK) == FSMC_Bank3_NAND) || \ + ((BANK) == FSMC_Bank4_PCCARD)) + +/** @defgroup NOR_SRAM_Controller + * @{ + */ + +/** @defgroup FSMC_Data_Address_Bus_Multiplexing + * @{ + */ + +#define FSMC_DataAddressMux_Disable ((uint32_t)0x00000000) +#define FSMC_DataAddressMux_Enable ((uint32_t)0x00000002) +#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \ + ((MUX) == FSMC_DataAddressMux_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Memory_Type + * @{ + */ + +#define FSMC_MemoryType_SRAM ((uint32_t)0x00000000) +#define FSMC_MemoryType_PSRAM ((uint32_t)0x00000004) +#define FSMC_MemoryType_NOR ((uint32_t)0x00000008) +#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \ + ((MEMORY) == FSMC_MemoryType_PSRAM)|| \ + ((MEMORY) == FSMC_MemoryType_NOR)) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Width + * @{ + */ + +#define FSMC_MemoryDataWidth_8b ((uint32_t)0x00000000) +#define FSMC_MemoryDataWidth_16b ((uint32_t)0x00000010) +#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \ + ((WIDTH) == FSMC_MemoryDataWidth_16b)) + +/** + * @} + */ + +/** @defgroup FSMC_Burst_Access_Mode + * @{ + */ + +#define FSMC_BurstAccessMode_Disable ((uint32_t)0x00000000) +#define FSMC_BurstAccessMode_Enable ((uint32_t)0x00000100) +#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \ + ((STATE) == FSMC_BurstAccessMode_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_AsynchronousWait + * @{ + */ +#define FSMC_AsynchronousWait_Disable ((uint32_t)0x00000000) +#define FSMC_AsynchronousWait_Enable ((uint32_t)0x00008000) +#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \ + ((STATE) == FSMC_AsynchronousWait_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal_Polarity + * @{ + */ + +#define FSMC_WaitSignalPolarity_Low ((uint32_t)0x00000000) +#define FSMC_WaitSignalPolarity_High ((uint32_t)0x00000200) +#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \ + ((POLARITY) == FSMC_WaitSignalPolarity_High)) + +/** + * @} + */ + +/** @defgroup FSMC_Wrap_Mode + * @{ + */ + +#define FSMC_WrapMode_Disable ((uint32_t)0x00000000) +#define FSMC_WrapMode_Enable ((uint32_t)0x00000400) +#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \ + ((MODE) == FSMC_WrapMode_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Timing + * @{ + */ + +#define FSMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000) +#define FSMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800) +#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \ + ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState)) + +/** + * @} + */ + +/** @defgroup FSMC_Write_Operation + * @{ + */ + +#define FSMC_WriteOperation_Disable ((uint32_t)0x00000000) +#define FSMC_WriteOperation_Enable ((uint32_t)0x00001000) +#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \ + ((OPERATION) == FSMC_WriteOperation_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal + * @{ + */ + +#define FSMC_WaitSignal_Disable ((uint32_t)0x00000000) +#define FSMC_WaitSignal_Enable ((uint32_t)0x00002000) +#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \ + ((SIGNAL) == FSMC_WaitSignal_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Extended_Mode + * @{ + */ + +#define FSMC_ExtendedMode_Disable ((uint32_t)0x00000000) +#define FSMC_ExtendedMode_Enable ((uint32_t)0x00004000) + +#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \ + ((MODE) == FSMC_ExtendedMode_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Write_Burst + * @{ + */ + +#define FSMC_WriteBurst_Disable ((uint32_t)0x00000000) +#define FSMC_WriteBurst_Enable ((uint32_t)0x00080000) +#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \ + ((BURST) == FSMC_WriteBurst_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Address_Setup_Time + * @{ + */ + +#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Address_Hold_Time + * @{ + */ + +#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Setup_Time + * @{ + */ + +#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF)) + +/** + * @} + */ + +/** @defgroup FSMC_Bus_Turn_around_Duration + * @{ + */ + +#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_CLK_Division + * @{ + */ + +#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Latency + * @{ + */ + +#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Access_Mode + * @{ + */ + +#define FSMC_AccessMode_A ((uint32_t)0x00000000) +#define FSMC_AccessMode_B ((uint32_t)0x10000000) +#define FSMC_AccessMode_C ((uint32_t)0x20000000) +#define FSMC_AccessMode_D ((uint32_t)0x30000000) +#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \ + ((MODE) == FSMC_AccessMode_B) || \ + ((MODE) == FSMC_AccessMode_C) || \ + ((MODE) == FSMC_AccessMode_D)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup NAND_PCCARD_Controller + * @{ + */ + +/** @defgroup FSMC_Wait_feature + * @{ + */ + +#define FSMC_Waitfeature_Disable ((uint32_t)0x00000000) +#define FSMC_Waitfeature_Enable ((uint32_t)0x00000002) +#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \ + ((FEATURE) == FSMC_Waitfeature_Enable)) + +/** + * @} + */ + + +/** @defgroup FSMC_ECC + * @{ + */ + +#define FSMC_ECC_Disable ((uint32_t)0x00000000) +#define FSMC_ECC_Enable ((uint32_t)0x00000040) +#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \ + ((STATE) == FSMC_ECC_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_ECC_Page_Size + * @{ + */ + +#define FSMC_ECCPageSize_256Bytes ((uint32_t)0x00000000) +#define FSMC_ECCPageSize_512Bytes ((uint32_t)0x00020000) +#define FSMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000) +#define FSMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000) +#define FSMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000) +#define FSMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000) +#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_512Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_8192Bytes)) + +/** + * @} + */ + +/** @defgroup FSMC_TCLR_Setup_Time + * @{ + */ + +#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_TAR_Setup_Time + * @{ + */ + +#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_Setup_Time + * @{ + */ + +#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Setup_Time + * @{ + */ + +#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_Hold_Setup_Time + * @{ + */ + +#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_HiZ_Setup_Time + * @{ + */ + +#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_Interrupt_sources + * @{ + */ + +#define FSMC_IT_RisingEdge ((uint32_t)0x00000008) +#define FSMC_IT_Level ((uint32_t)0x00000010) +#define FSMC_IT_FallingEdge ((uint32_t)0x00000020) +#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000)) +#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \ + ((IT) == FSMC_IT_Level) || \ + ((IT) == FSMC_IT_FallingEdge)) +/** + * @} + */ + +/** @defgroup FSMC_Flags + * @{ + */ + +#define FSMC_FLAG_RisingEdge ((uint32_t)0x00000001) +#define FSMC_FLAG_Level ((uint32_t)0x00000002) +#define FSMC_FLAG_FallingEdge ((uint32_t)0x00000004) +#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040) +#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \ + ((FLAG) == FSMC_FLAG_Level) || \ + ((FLAG) == FSMC_FLAG_FallingEdge) || \ + ((FLAG) == FSMC_FLAG_FEMPT)) + +#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FSMC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FSMC_Exported_Functions + * @{ + */ + +void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank); +void FSMC_NANDDeInit(uint32_t FSMC_Bank); +void FSMC_PCCARDDeInit(void); +void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); +void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); +void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); +void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); +void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); +void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); +void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState); +void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState); +void FSMC_PCCARDCmd(FunctionalState NewState); +void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState); +uint32_t FSMC_GetECC(uint32_t FSMC_Bank); +void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState); +FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG); +void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG); +ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT); +void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_FSMC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_gpio.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_gpio.h new file mode 100644 index 0000000..b6aec09 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_gpio.h @@ -0,0 +1,388 @@ +/** + ****************************************************************************** + * @file stm32f10x_gpio.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the GPIO + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_GPIO_H +#define __STM32F10x_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/** @defgroup GPIO_Exported_Types + * @{ + */ + +#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \ + ((PERIPH) == GPIOB) || \ + ((PERIPH) == GPIOC) || \ + ((PERIPH) == GPIOD) || \ + ((PERIPH) == GPIOE) || \ + ((PERIPH) == GPIOF) || \ + ((PERIPH) == GPIOG)) + +/** + * @brief Output Maximum frequency selection + */ + +typedef enum +{ + GPIO_Speed_10MHz = 1, + GPIO_Speed_2MHz, + GPIO_Speed_50MHz +}GPIOSpeed_TypeDef; +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \ + ((SPEED) == GPIO_Speed_50MHz)) + +/** + * @brief Configuration Mode enumeration + */ + +typedef enum +{ GPIO_Mode_AIN = 0x0, + GPIO_Mode_IN_FLOATING = 0x04, + GPIO_Mode_IPD = 0x28, + GPIO_Mode_IPU = 0x48, + GPIO_Mode_Out_OD = 0x14, + GPIO_Mode_Out_PP = 0x10, + GPIO_Mode_AF_OD = 0x1C, + GPIO_Mode_AF_PP = 0x18 +}GPIOMode_TypeDef; + +#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \ + ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \ + ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \ + ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP)) + +/** + * @brief GPIO Init structure definition + */ + +typedef struct +{ + uint16_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins_define */ + + GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIOSpeed_TypeDef */ + + GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIOMode_TypeDef */ +}GPIO_InitTypeDef; + + +/** + * @brief Bit_SET and Bit_RESET enumeration + */ + +typedef enum +{ Bit_RESET = 0, + Bit_SET +}BitAction; + +#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Constants + * @{ + */ + +/** @defgroup GPIO_pins_define + * @{ + */ + +#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ +#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ +#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ +#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ +#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ +#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ +#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ +#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ +#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ +#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ +#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ +#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ +#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ +#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ +#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ +#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ +#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */ + +#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00)) + +#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ + ((PIN) == GPIO_Pin_1) || \ + ((PIN) == GPIO_Pin_2) || \ + ((PIN) == GPIO_Pin_3) || \ + ((PIN) == GPIO_Pin_4) || \ + ((PIN) == GPIO_Pin_5) || \ + ((PIN) == GPIO_Pin_6) || \ + ((PIN) == GPIO_Pin_7) || \ + ((PIN) == GPIO_Pin_8) || \ + ((PIN) == GPIO_Pin_9) || \ + ((PIN) == GPIO_Pin_10) || \ + ((PIN) == GPIO_Pin_11) || \ + ((PIN) == GPIO_Pin_12) || \ + ((PIN) == GPIO_Pin_13) || \ + ((PIN) == GPIO_Pin_14) || \ + ((PIN) == GPIO_Pin_15)) + +/** + * @} + */ + +/** @defgroup GPIO_Remap_define + * @{ + */ + +#define GPIO_Remap_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Alternate Function mapping */ +#define GPIO_Remap_I2C1 ((uint32_t)0x00000002) /*!< I2C1 Alternate Function mapping */ +#define GPIO_Remap_USART1 ((uint32_t)0x00000004) /*!< USART1 Alternate Function mapping */ +#define GPIO_Remap_USART2 ((uint32_t)0x00000008) /*!< USART2 Alternate Function mapping */ +#define GPIO_PartialRemap_USART3 ((uint32_t)0x00140010) /*!< USART3 Partial Alternate Function mapping */ +#define GPIO_FullRemap_USART3 ((uint32_t)0x00140030) /*!< USART3 Full Alternate Function mapping */ +#define GPIO_PartialRemap_TIM1 ((uint32_t)0x00160040) /*!< TIM1 Partial Alternate Function mapping */ +#define GPIO_FullRemap_TIM1 ((uint32_t)0x001600C0) /*!< TIM1 Full Alternate Function mapping */ +#define GPIO_PartialRemap1_TIM2 ((uint32_t)0x00180100) /*!< TIM2 Partial1 Alternate Function mapping */ +#define GPIO_PartialRemap2_TIM2 ((uint32_t)0x00180200) /*!< TIM2 Partial2 Alternate Function mapping */ +#define GPIO_FullRemap_TIM2 ((uint32_t)0x00180300) /*!< TIM2 Full Alternate Function mapping */ +#define GPIO_PartialRemap_TIM3 ((uint32_t)0x001A0800) /*!< TIM3 Partial Alternate Function mapping */ +#define GPIO_FullRemap_TIM3 ((uint32_t)0x001A0C00) /*!< TIM3 Full Alternate Function mapping */ +#define GPIO_Remap_TIM4 ((uint32_t)0x00001000) /*!< TIM4 Alternate Function mapping */ +#define GPIO_Remap1_CAN1 ((uint32_t)0x001D4000) /*!< CAN1 Alternate Function mapping */ +#define GPIO_Remap2_CAN1 ((uint32_t)0x001D6000) /*!< CAN1 Alternate Function mapping */ +#define GPIO_Remap_PD01 ((uint32_t)0x00008000) /*!< PD01 Alternate Function mapping */ +#define GPIO_Remap_TIM5CH4_LSI ((uint32_t)0x00200001) /*!< LSI connected to TIM5 Channel4 input capture for calibration */ +#define GPIO_Remap_ADC1_ETRGINJ ((uint32_t)0x00200002) /*!< ADC1 External Trigger Injected Conversion remapping */ +#define GPIO_Remap_ADC1_ETRGREG ((uint32_t)0x00200004) /*!< ADC1 External Trigger Regular Conversion remapping */ +#define GPIO_Remap_ADC2_ETRGINJ ((uint32_t)0x00200008) /*!< ADC2 External Trigger Injected Conversion remapping */ +#define GPIO_Remap_ADC2_ETRGREG ((uint32_t)0x00200010) /*!< ADC2 External Trigger Regular Conversion remapping */ +#define GPIO_Remap_ETH ((uint32_t)0x00200020) /*!< Ethernet remapping (only for Connectivity line devices) */ +#define GPIO_Remap_CAN2 ((uint32_t)0x00200040) /*!< CAN2 remapping (only for Connectivity line devices) */ +#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */ +#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */ +#define GPIO_Remap_SPI3 ((uint32_t)0x00201100) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */ +#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected + to TIM2 Internal Trigger 1 for calibration + (only for Connectivity line devices) */ +#define GPIO_Remap_PTP_PPS ((uint32_t)0x00204000) /*!< Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */ + +#define GPIO_Remap_TIM15 ((uint32_t)0x80000001) /*!< TIM15 Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_TIM16 ((uint32_t)0x80000002) /*!< TIM16 Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_TIM17 ((uint32_t)0x80000004) /*!< TIM17 Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_CEC ((uint32_t)0x80000008) /*!< CEC Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_TIM1_DMA ((uint32_t)0x80000010) /*!< TIM1 DMA requests mapping (only for Value line devices) */ + +#define GPIO_Remap_TIM9 ((uint32_t)0x80000020) /*!< TIM9 Alternate Function mapping (only for XL-density devices) */ +#define GPIO_Remap_TIM10 ((uint32_t)0x80000040) /*!< TIM10 Alternate Function mapping (only for XL-density devices) */ +#define GPIO_Remap_TIM11 ((uint32_t)0x80000080) /*!< TIM11 Alternate Function mapping (only for XL-density devices) */ +#define GPIO_Remap_TIM13 ((uint32_t)0x80000100) /*!< TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) */ +#define GPIO_Remap_TIM14 ((uint32_t)0x80000200) /*!< TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) */ +#define GPIO_Remap_FSMC_NADV ((uint32_t)0x80000400) /*!< FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) */ + +#define GPIO_Remap_TIM67_DAC_DMA ((uint32_t)0x80000800) /*!< TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) */ +#define GPIO_Remap_TIM12 ((uint32_t)0x80001000) /*!< TIM12 Alternate Function mapping (only for High density Value line devices) */ +#define GPIO_Remap_MISC ((uint32_t)0x80002000) /*!< Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, + only for High density Value line devices) */ + +#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \ + ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \ + ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \ + ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \ + ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \ + ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \ + ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \ + ((REMAP) == GPIO_Remap1_CAN1) || ((REMAP) == GPIO_Remap2_CAN1) || \ + ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \ + ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \ + ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \ + ((REMAP) == GPIO_Remap_ETH) ||((REMAP) == GPIO_Remap_CAN2) || \ + ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable) || \ + ((REMAP) == GPIO_Remap_SWJ_Disable)|| ((REMAP) == GPIO_Remap_SPI3) || \ + ((REMAP) == GPIO_Remap_TIM2ITR1_PTP_SOF) || ((REMAP) == GPIO_Remap_PTP_PPS) || \ + ((REMAP) == GPIO_Remap_TIM15) || ((REMAP) == GPIO_Remap_TIM16) || \ + ((REMAP) == GPIO_Remap_TIM17) || ((REMAP) == GPIO_Remap_CEC) || \ + ((REMAP) == GPIO_Remap_TIM1_DMA) || ((REMAP) == GPIO_Remap_TIM9) || \ + ((REMAP) == GPIO_Remap_TIM10) || ((REMAP) == GPIO_Remap_TIM11) || \ + ((REMAP) == GPIO_Remap_TIM13) || ((REMAP) == GPIO_Remap_TIM14) || \ + ((REMAP) == GPIO_Remap_FSMC_NADV) || ((REMAP) == GPIO_Remap_TIM67_DAC_DMA) || \ + ((REMAP) == GPIO_Remap_TIM12) || ((REMAP) == GPIO_Remap_MISC)) + +/** + * @} + */ + +/** @defgroup GPIO_Port_Sources + * @{ + */ + +#define GPIO_PortSourceGPIOA ((uint8_t)0x00) +#define GPIO_PortSourceGPIOB ((uint8_t)0x01) +#define GPIO_PortSourceGPIOC ((uint8_t)0x02) +#define GPIO_PortSourceGPIOD ((uint8_t)0x03) +#define GPIO_PortSourceGPIOE ((uint8_t)0x04) +#define GPIO_PortSourceGPIOF ((uint8_t)0x05) +#define GPIO_PortSourceGPIOG ((uint8_t)0x06) +#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOE)) + +#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOG)) + +/** + * @} + */ + +/** @defgroup GPIO_Pin_sources + * @{ + */ + +#define GPIO_PinSource0 ((uint8_t)0x00) +#define GPIO_PinSource1 ((uint8_t)0x01) +#define GPIO_PinSource2 ((uint8_t)0x02) +#define GPIO_PinSource3 ((uint8_t)0x03) +#define GPIO_PinSource4 ((uint8_t)0x04) +#define GPIO_PinSource5 ((uint8_t)0x05) +#define GPIO_PinSource6 ((uint8_t)0x06) +#define GPIO_PinSource7 ((uint8_t)0x07) +#define GPIO_PinSource8 ((uint8_t)0x08) +#define GPIO_PinSource9 ((uint8_t)0x09) +#define GPIO_PinSource10 ((uint8_t)0x0A) +#define GPIO_PinSource11 ((uint8_t)0x0B) +#define GPIO_PinSource12 ((uint8_t)0x0C) +#define GPIO_PinSource13 ((uint8_t)0x0D) +#define GPIO_PinSource14 ((uint8_t)0x0E) +#define GPIO_PinSource15 ((uint8_t)0x0F) + +#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ + ((PINSOURCE) == GPIO_PinSource1) || \ + ((PINSOURCE) == GPIO_PinSource2) || \ + ((PINSOURCE) == GPIO_PinSource3) || \ + ((PINSOURCE) == GPIO_PinSource4) || \ + ((PINSOURCE) == GPIO_PinSource5) || \ + ((PINSOURCE) == GPIO_PinSource6) || \ + ((PINSOURCE) == GPIO_PinSource7) || \ + ((PINSOURCE) == GPIO_PinSource8) || \ + ((PINSOURCE) == GPIO_PinSource9) || \ + ((PINSOURCE) == GPIO_PinSource10) || \ + ((PINSOURCE) == GPIO_PinSource11) || \ + ((PINSOURCE) == GPIO_PinSource12) || \ + ((PINSOURCE) == GPIO_PinSource13) || \ + ((PINSOURCE) == GPIO_PinSource14) || \ + ((PINSOURCE) == GPIO_PinSource15)) + +/** + * @} + */ + +/** @defgroup Ethernet_Media_Interface + * @{ + */ +#define GPIO_ETH_MediaInterface_MII ((u32)0x00000000) +#define GPIO_ETH_MediaInterface_RMII ((u32)0x00000001) + +#define IS_GPIO_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == GPIO_ETH_MediaInterface_MII) || \ + ((INTERFACE) == GPIO_ETH_MediaInterface_RMII)) + +/** + * @} + */ +/** + * @} + */ + +/** @defgroup GPIO_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions + * @{ + */ + +void GPIO_DeInit(GPIO_TypeDef* GPIOx); +void GPIO_AFIODeInit(void); +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx); +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal); +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal); +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); +void GPIO_EventOutputCmd(FunctionalState NewState); +void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState); +void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); +void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface); + + +void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_GPIO_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_i2c.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_i2c.h new file mode 100644 index 0000000..60e4b14 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_i2c.h @@ -0,0 +1,684 @@ +/** + ****************************************************************************** + * @file stm32f10x_i2c.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the I2C firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_I2C_H +#define __STM32F10x_I2C_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/** @defgroup I2C_Exported_Types + * @{ + */ + +/** + * @brief I2C Init structure definition + */ + +typedef struct +{ + uint32_t I2C_ClockSpeed; /*!< Specifies the clock frequency. + This parameter must be set to a value lower than 400kHz */ + + uint16_t I2C_Mode; /*!< Specifies the I2C mode. + This parameter can be a value of @ref I2C_mode */ + + uint16_t I2C_DutyCycle; /*!< Specifies the I2C fast mode duty cycle. + This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ + + uint16_t I2C_OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint16_t I2C_Ack; /*!< Enables or disables the acknowledgement. + This parameter can be a value of @ref I2C_acknowledgement */ + + uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged. + This parameter can be a value of @ref I2C_acknowledged_address */ +}I2C_InitTypeDef; + +/** + * @} + */ + + +/** @defgroup I2C_Exported_Constants + * @{ + */ + +#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \ + ((PERIPH) == I2C2)) +/** @defgroup I2C_mode + * @{ + */ + +#define I2C_Mode_I2C ((uint16_t)0x0000) +#define I2C_Mode_SMBusDevice ((uint16_t)0x0002) +#define I2C_Mode_SMBusHost ((uint16_t)0x000A) +#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \ + ((MODE) == I2C_Mode_SMBusDevice) || \ + ((MODE) == I2C_Mode_SMBusHost)) +/** + * @} + */ + +/** @defgroup I2C_duty_cycle_in_fast_mode + * @{ + */ + +#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */ +#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */ +#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \ + ((CYCLE) == I2C_DutyCycle_2)) +/** + * @} + */ + +/** @defgroup I2C_acknowledgement + * @{ + */ + +#define I2C_Ack_Enable ((uint16_t)0x0400) +#define I2C_Ack_Disable ((uint16_t)0x0000) +#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \ + ((STATE) == I2C_Ack_Disable)) +/** + * @} + */ + +/** @defgroup I2C_transfer_direction + * @{ + */ + +#define I2C_Direction_Transmitter ((uint8_t)0x00) +#define I2C_Direction_Receiver ((uint8_t)0x01) +#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \ + ((DIRECTION) == I2C_Direction_Receiver)) +/** + * @} + */ + +/** @defgroup I2C_acknowledged_address + * @{ + */ + +#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000) +#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000) +#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \ + ((ADDRESS) == I2C_AcknowledgedAddress_10bit)) +/** + * @} + */ + +/** @defgroup I2C_registers + * @{ + */ + +#define I2C_Register_CR1 ((uint8_t)0x00) +#define I2C_Register_CR2 ((uint8_t)0x04) +#define I2C_Register_OAR1 ((uint8_t)0x08) +#define I2C_Register_OAR2 ((uint8_t)0x0C) +#define I2C_Register_DR ((uint8_t)0x10) +#define I2C_Register_SR1 ((uint8_t)0x14) +#define I2C_Register_SR2 ((uint8_t)0x18) +#define I2C_Register_CCR ((uint8_t)0x1C) +#define I2C_Register_TRISE ((uint8_t)0x20) +#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \ + ((REGISTER) == I2C_Register_CR2) || \ + ((REGISTER) == I2C_Register_OAR1) || \ + ((REGISTER) == I2C_Register_OAR2) || \ + ((REGISTER) == I2C_Register_DR) || \ + ((REGISTER) == I2C_Register_SR1) || \ + ((REGISTER) == I2C_Register_SR2) || \ + ((REGISTER) == I2C_Register_CCR) || \ + ((REGISTER) == I2C_Register_TRISE)) +/** + * @} + */ + +/** @defgroup I2C_SMBus_alert_pin_level + * @{ + */ + +#define I2C_SMBusAlert_Low ((uint16_t)0x2000) +#define I2C_SMBusAlert_High ((uint16_t)0xDFFF) +#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \ + ((ALERT) == I2C_SMBusAlert_High)) +/** + * @} + */ + +/** @defgroup I2C_PEC_position + * @{ + */ + +#define I2C_PECPosition_Next ((uint16_t)0x0800) +#define I2C_PECPosition_Current ((uint16_t)0xF7FF) +#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \ + ((POSITION) == I2C_PECPosition_Current)) +/** + * @} + */ + +/** @defgroup I2C_NCAK_position + * @{ + */ + +#define I2C_NACKPosition_Next ((uint16_t)0x0800) +#define I2C_NACKPosition_Current ((uint16_t)0xF7FF) +#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \ + ((POSITION) == I2C_NACKPosition_Current)) +/** + * @} + */ + +/** @defgroup I2C_interrupts_definition + * @{ + */ + +#define I2C_IT_BUF ((uint16_t)0x0400) +#define I2C_IT_EVT ((uint16_t)0x0200) +#define I2C_IT_ERR ((uint16_t)0x0100) +#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00)) +/** + * @} + */ + +/** @defgroup I2C_interrupts_definition + * @{ + */ + +#define I2C_IT_SMBALERT ((uint32_t)0x01008000) +#define I2C_IT_TIMEOUT ((uint32_t)0x01004000) +#define I2C_IT_PECERR ((uint32_t)0x01001000) +#define I2C_IT_OVR ((uint32_t)0x01000800) +#define I2C_IT_AF ((uint32_t)0x01000400) +#define I2C_IT_ARLO ((uint32_t)0x01000200) +#define I2C_IT_BERR ((uint32_t)0x01000100) +#define I2C_IT_TXE ((uint32_t)0x06000080) +#define I2C_IT_RXNE ((uint32_t)0x06000040) +#define I2C_IT_STOPF ((uint32_t)0x02000010) +#define I2C_IT_ADD10 ((uint32_t)0x02000008) +#define I2C_IT_BTF ((uint32_t)0x02000004) +#define I2C_IT_ADDR ((uint32_t)0x02000002) +#define I2C_IT_SB ((uint32_t)0x02000001) + +#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00)) + +#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \ + ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \ + ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \ + ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \ + ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \ + ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \ + ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB)) +/** + * @} + */ + +/** @defgroup I2C_flags_definition + * @{ + */ + +/** + * @brief SR2 register flags + */ + +#define I2C_FLAG_DUALF ((uint32_t)0x00800000) +#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000) +#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000) +#define I2C_FLAG_GENCALL ((uint32_t)0x00100000) +#define I2C_FLAG_TRA ((uint32_t)0x00040000) +#define I2C_FLAG_BUSY ((uint32_t)0x00020000) +#define I2C_FLAG_MSL ((uint32_t)0x00010000) + +/** + * @brief SR1 register flags + */ + +#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000) +#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000) +#define I2C_FLAG_PECERR ((uint32_t)0x10001000) +#define I2C_FLAG_OVR ((uint32_t)0x10000800) +#define I2C_FLAG_AF ((uint32_t)0x10000400) +#define I2C_FLAG_ARLO ((uint32_t)0x10000200) +#define I2C_FLAG_BERR ((uint32_t)0x10000100) +#define I2C_FLAG_TXE ((uint32_t)0x10000080) +#define I2C_FLAG_RXNE ((uint32_t)0x10000040) +#define I2C_FLAG_STOPF ((uint32_t)0x10000010) +#define I2C_FLAG_ADD10 ((uint32_t)0x10000008) +#define I2C_FLAG_BTF ((uint32_t)0x10000004) +#define I2C_FLAG_ADDR ((uint32_t)0x10000002) +#define I2C_FLAG_SB ((uint32_t)0x10000001) + +#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00)) + +#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \ + ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \ + ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \ + ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \ + ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \ + ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \ + ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \ + ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \ + ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \ + ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \ + ((FLAG) == I2C_FLAG_SB)) +/** + * @} + */ + +/** @defgroup I2C_Events + * @{ + */ + +/*======================================== + + I2C Master Events (Events grouped in order of communication) + ==========================================*/ +/** + * @brief Communication start + * + * After sending the START condition (I2C_GenerateSTART() function) the master + * has to wait for this event. It means that the Start condition has been correctly + * released on the I2C bus (the bus is free, no other devices is communicating). + * + */ +/* --EV5 */ +#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */ + +/** + * @brief Address Acknowledge + * + * After checking on EV5 (start condition correctly released on the bus), the + * master sends the address of the slave(s) with which it will communicate + * (I2C_Send7bitAddress() function, it also determines the direction of the communication: + * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges + * his address. If an acknowledge is sent on the bus, one of the following events will + * be set: + * + * 1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED + * event is set. + * + * 2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED + * is set + * + * 3) In case of 10-Bit addressing mode, the master (just after generating the START + * and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData() + * function). Then master should wait on EV9. It means that the 10-bit addressing + * header has been correctly sent on the bus. Then master should send the second part of + * the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master + * should wait for event EV6. + * + */ + +/* --EV6 */ +#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */ +#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */ +/* --EV9 */ +#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */ + +/** + * @brief Communication events + * + * If a communication is established (START condition generated and slave address + * acknowledged) then the master has to check on one of the following events for + * communication procedures: + * + * 1) Master Receiver mode: The master has to wait on the event EV7 then to read + * the data received from the slave (I2C_ReceiveData() function). + * + * 2) Master Transmitter mode: The master has to send data (I2C_SendData() + * function) then to wait on event EV8 or EV8_2. + * These two events are similar: + * - EV8 means that the data has been written in the data register and is + * being shifted out. + * - EV8_2 means that the data has been physically shifted out and output + * on the bus. + * In most cases, using EV8 is sufficient for the application. + * Using EV8_2 leads to a slower communication but ensure more reliable test. + * EV8_2 is also more suitable than EV8 for testing on the last data transmission + * (before Stop condition generation). + * + * @note In case the user software does not guarantee that this event EV7 is + * managed before the current byte end of transfer, then user may check on EV7 + * and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)). + * In this case the communication may be slower. + * + */ + +/* Master RECEIVER mode -----------------------------*/ +/* --EV7 */ +#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */ + +/* Master TRANSMITTER mode --------------------------*/ +/* --EV8 */ +#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */ +/* --EV8_2 */ +#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */ + + +/*======================================== + + I2C Slave Events (Events grouped in order of communication) + ==========================================*/ + +/** + * @brief Communication start events + * + * Wait on one of these events at the start of the communication. It means that + * the I2C peripheral detected a Start condition on the bus (generated by master + * device) followed by the peripheral address. The peripheral generates an ACK + * condition on the bus (if the acknowledge feature is enabled through function + * I2C_AcknowledgeConfig()) and the events listed above are set : + * + * 1) In normal case (only one address managed by the slave), when the address + * sent by the master matches the own address of the peripheral (configured by + * I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set + * (where XXX could be TRANSMITTER or RECEIVER). + * + * 2) In case the address sent by the master matches the second address of the + * peripheral (configured by the function I2C_OwnAddress2Config() and enabled + * by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED + * (where XXX could be TRANSMITTER or RECEIVER) are set. + * + * 3) In case the address sent by the master is General Call (address 0x00) and + * if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd()) + * the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED. + * + */ + +/* --EV1 (all the events below are variants of EV1) */ +/* 1) Case of One Single Address managed by the slave */ +#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ + +/* 2) Case of Dual address managed by the slave */ +#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */ + +/* 3) Case of General Call enabled for the slave */ +#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */ + +/** + * @brief Communication events + * + * Wait on one of these events when EV1 has already been checked and: + * + * - Slave RECEIVER mode: + * - EV2: When the application is expecting a data byte to be received. + * - EV4: When the application is expecting the end of the communication: master + * sends a stop condition and data transmission is stopped. + * + * - Slave Transmitter mode: + * - EV3: When a byte has been transmitted by the slave and the application is expecting + * the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and + * I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be + * used when the user software doesn't guarantee the EV3 is managed before the + * current byte end of transfer. + * - EV3_2: When the master sends a NACK in order to tell slave that data transmission + * shall end (before sending the STOP condition). In this case slave has to stop sending + * data bytes and expect a Stop condition on the bus. + * + * @note In case the user software does not guarantee that the event EV2 is + * managed before the current byte end of transfer, then user may check on EV2 + * and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)). + * In this case the communication may be slower. + * + */ + +/* Slave RECEIVER mode --------------------------*/ +/* --EV2 */ +#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */ +/* --EV4 */ +#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */ + +/* Slave TRANSMITTER mode -----------------------*/ +/* --EV3 */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */ +/* --EV3_2 */ +#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */ + +/*=========================== End of Events Description ==========================================*/ + +#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \ + ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \ + ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \ + ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \ + ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \ + ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE)) +/** + * @} + */ + +/** @defgroup I2C_own_address1 + * @{ + */ + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF) +/** + * @} + */ + +/** @defgroup I2C_clock_speed + * @{ + */ + +#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions + * @{ + */ + +void I2C_DeInit(I2C_TypeDef* I2Cx); +void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct); +void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct); +void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address); +void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState); +void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data); +uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx); +void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction); +uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register); +void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition); +void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert); +void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition); +void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState); +uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx); +void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle); + +/** + * @brief + **************************************************************************************** + * + * I2C State Monitoring Functions + * + **************************************************************************************** + * This I2C driver provides three different ways for I2C state monitoring + * depending on the application requirements and constraints: + * + * + * 1) Basic state monitoring: + * Using I2C_CheckEvent() function: + * It compares the status registers (SR1 and SR2) content to a given event + * (can be the combination of one or more flags). + * It returns SUCCESS if the current status includes the given flags + * and returns ERROR if one or more flags are missing in the current status. + * - When to use: + * - This function is suitable for most applications as well as for startup + * activity since the events are fully described in the product reference manual + * (RM0008). + * - It is also suitable for users who need to define their own events. + * - Limitations: + * - If an error occurs (ie. error flags are set besides to the monitored flags), + * the I2C_CheckEvent() function may return SUCCESS despite the communication + * hold or corrupted real state. + * In this case, it is advised to use error interrupts to monitor the error + * events and handle them in the interrupt IRQ handler. + * + * @note + * For error management, it is advised to use the following functions: + * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR). + * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs. + * Where x is the peripheral instance (I2C1, I2C2 ...) + * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler() + * in order to determine which error occurred. + * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd() + * and/or I2C_GenerateStop() in order to clear the error flag and source, + * and return to correct communication status. + * + * + * 2) Advanced state monitoring: + * Using the function I2C_GetLastEvent() which returns the image of both status + * registers in a single word (uint32_t) (Status Register 2 value is shifted left + * by 16 bits and concatenated to Status Register 1). + * - When to use: + * - This function is suitable for the same applications above but it allows to + * overcome the limitations of I2C_GetFlagStatus() function (see below). + * The returned value could be compared to events already defined in the + * library (stm32f10x_i2c.h) or to custom values defined by user. + * - This function is suitable when multiple flags are monitored at the same time. + * - At the opposite of I2C_CheckEvent() function, this function allows user to + * choose when an event is accepted (when all events flags are set and no + * other flags are set or just when the needed flags are set like + * I2C_CheckEvent() function). + * - Limitations: + * - User may need to define his own events. + * - Same remark concerning the error management is applicable for this + * function if user decides to check only regular communication flags (and + * ignores error flags). + * + * + * 3) Flag-based state monitoring: + * Using the function I2C_GetFlagStatus() which simply returns the status of + * one single flag (ie. I2C_FLAG_RXNE ...). + * - When to use: + * - This function could be used for specific applications or in debug phase. + * - It is suitable when only one flag checking is needed (most I2C events + * are monitored through multiple flags). + * - Limitations: + * - When calling this function, the Status register is accessed. Some flags are + * cleared when the status register is accessed. So checking the status + * of one Flag, may clear other ones. + * - Function may need to be called twice or more in order to monitor one + * single event. + * + */ + +/** + * + * 1) Basic state monitoring + ******************************************************************************* + */ +ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT); +/** + * + * 2) Advanced state monitoring + ******************************************************************************* + */ +uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx); +/** + * + * 3) Flag-based state monitoring + ******************************************************************************* + */ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); +/** + * + ******************************************************************************* + */ + +void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); +ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT); +void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_I2C_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_iwdg.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_iwdg.h new file mode 100644 index 0000000..25b0bb5 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_iwdg.h @@ -0,0 +1,140 @@ +/** + ****************************************************************************** + * @file stm32f10x_iwdg.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the IWDG + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_IWDG_H +#define __STM32F10x_IWDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup IWDG + * @{ + */ + +/** @defgroup IWDG_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Exported_Constants + * @{ + */ + +/** @defgroup IWDG_WriteAccess + * @{ + */ + +#define IWDG_WriteAccess_Enable ((uint16_t)0x5555) +#define IWDG_WriteAccess_Disable ((uint16_t)0x0000) +#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \ + ((ACCESS) == IWDG_WriteAccess_Disable)) +/** + * @} + */ + +/** @defgroup IWDG_prescaler + * @{ + */ + +#define IWDG_Prescaler_4 ((uint8_t)0x00) +#define IWDG_Prescaler_8 ((uint8_t)0x01) +#define IWDG_Prescaler_16 ((uint8_t)0x02) +#define IWDG_Prescaler_32 ((uint8_t)0x03) +#define IWDG_Prescaler_64 ((uint8_t)0x04) +#define IWDG_Prescaler_128 ((uint8_t)0x05) +#define IWDG_Prescaler_256 ((uint8_t)0x06) +#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \ + ((PRESCALER) == IWDG_Prescaler_8) || \ + ((PRESCALER) == IWDG_Prescaler_16) || \ + ((PRESCALER) == IWDG_Prescaler_32) || \ + ((PRESCALER) == IWDG_Prescaler_64) || \ + ((PRESCALER) == IWDG_Prescaler_128)|| \ + ((PRESCALER) == IWDG_Prescaler_256)) +/** + * @} + */ + +/** @defgroup IWDG_Flag + * @{ + */ + +#define IWDG_FLAG_PVU ((uint16_t)0x0001) +#define IWDG_FLAG_RVU ((uint16_t)0x0002) +#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU)) +#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup IWDG_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Exported_Functions + * @{ + */ + +void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess); +void IWDG_SetPrescaler(uint8_t IWDG_Prescaler); +void IWDG_SetReload(uint16_t Reload); +void IWDG_ReloadCounter(void); +void IWDG_Enable(void); +FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_IWDG_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_pwr.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_pwr.h new file mode 100644 index 0000000..1c025e2 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_pwr.h @@ -0,0 +1,156 @@ +/** + ****************************************************************************** + * @file stm32f10x_pwr.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the PWR firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_PWR_H +#define __STM32F10x_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/** @defgroup PWR_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Exported_Constants + * @{ + */ + +/** @defgroup PVD_detection_level + * @{ + */ + +#define PWR_PVDLevel_2V2 ((uint32_t)0x00000000) +#define PWR_PVDLevel_2V3 ((uint32_t)0x00000020) +#define PWR_PVDLevel_2V4 ((uint32_t)0x00000040) +#define PWR_PVDLevel_2V5 ((uint32_t)0x00000060) +#define PWR_PVDLevel_2V6 ((uint32_t)0x00000080) +#define PWR_PVDLevel_2V7 ((uint32_t)0x000000A0) +#define PWR_PVDLevel_2V8 ((uint32_t)0x000000C0) +#define PWR_PVDLevel_2V9 ((uint32_t)0x000000E0) +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \ + ((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \ + ((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \ + ((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9)) +/** + * @} + */ + +/** @defgroup Regulator_state_is_STOP_mode + * @{ + */ + +#define PWR_Regulator_ON ((uint32_t)0x00000000) +#define PWR_Regulator_LowPower ((uint32_t)0x00000001) +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \ + ((REGULATOR) == PWR_Regulator_LowPower)) +/** + * @} + */ + +/** @defgroup STOP_mode_entry + * @{ + */ + +#define PWR_STOPEntry_WFI ((uint8_t)0x01) +#define PWR_STOPEntry_WFE ((uint8_t)0x02) +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE)) + +/** + * @} + */ + +/** @defgroup PWR_Flag + * @{ + */ + +#define PWR_FLAG_WU ((uint32_t)0x00000001) +#define PWR_FLAG_SB ((uint32_t)0x00000002) +#define PWR_FLAG_PVDO ((uint32_t)0x00000004) +#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ + ((FLAG) == PWR_FLAG_PVDO)) + +#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup PWR_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions + * @{ + */ + +void PWR_DeInit(void); +void PWR_BackupAccessCmd(FunctionalState NewState); +void PWR_PVDCmd(FunctionalState NewState); +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); +void PWR_WakeUpPinCmd(FunctionalState NewState); +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); +void PWR_EnterSTANDBYMode(void); +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG); +void PWR_ClearFlag(uint32_t PWR_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_PWR_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_rcc.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_rcc.h new file mode 100644 index 0000000..1149c34 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_rcc.h @@ -0,0 +1,727 @@ +/** + ****************************************************************************** + * @file stm32f10x_rcc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the RCC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_RCC_H +#define __STM32F10x_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/** @defgroup RCC_Exported_Types + * @{ + */ + +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< returns SYSCLK clock frequency expressed in Hz */ + uint32_t HCLK_Frequency; /*!< returns HCLK clock frequency expressed in Hz */ + uint32_t PCLK1_Frequency; /*!< returns PCLK1 clock frequency expressed in Hz */ + uint32_t PCLK2_Frequency; /*!< returns PCLK2 clock frequency expressed in Hz */ + uint32_t ADCCLK_Frequency; /*!< returns ADCCLK clock frequency expressed in Hz */ +}RCC_ClocksTypeDef; + +/** + * @} + */ + +/** @defgroup RCC_Exported_Constants + * @{ + */ + +/** @defgroup HSE_configuration + * @{ + */ + +#define RCC_HSE_OFF ((uint32_t)0x00000000) +#define RCC_HSE_ON ((uint32_t)0x00010000) +#define RCC_HSE_Bypass ((uint32_t)0x00040000) +#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ + ((HSE) == RCC_HSE_Bypass)) + +/** + * @} + */ + +/** @defgroup PLL_entry_clock_source + * @{ + */ + +#define RCC_PLLSource_HSI_Div2 ((uint32_t)0x00000000) + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_CL) + #define RCC_PLLSource_HSE_Div1 ((uint32_t)0x00010000) + #define RCC_PLLSource_HSE_Div2 ((uint32_t)0x00030000) + #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ + ((SOURCE) == RCC_PLLSource_HSE_Div1) || \ + ((SOURCE) == RCC_PLLSource_HSE_Div2)) +#else + #define RCC_PLLSource_PREDIV1 ((uint32_t)0x00010000) + #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ + ((SOURCE) == RCC_PLLSource_PREDIV1)) +#endif /* STM32F10X_CL */ + +/** + * @} + */ + +/** @defgroup PLL_multiplication_factor + * @{ + */ +#ifndef STM32F10X_CL + #define RCC_PLLMul_2 ((uint32_t)0x00000000) + #define RCC_PLLMul_3 ((uint32_t)0x00040000) + #define RCC_PLLMul_4 ((uint32_t)0x00080000) + #define RCC_PLLMul_5 ((uint32_t)0x000C0000) + #define RCC_PLLMul_6 ((uint32_t)0x00100000) + #define RCC_PLLMul_7 ((uint32_t)0x00140000) + #define RCC_PLLMul_8 ((uint32_t)0x00180000) + #define RCC_PLLMul_9 ((uint32_t)0x001C0000) + #define RCC_PLLMul_10 ((uint32_t)0x00200000) + #define RCC_PLLMul_11 ((uint32_t)0x00240000) + #define RCC_PLLMul_12 ((uint32_t)0x00280000) + #define RCC_PLLMul_13 ((uint32_t)0x002C0000) + #define RCC_PLLMul_14 ((uint32_t)0x00300000) + #define RCC_PLLMul_15 ((uint32_t)0x00340000) + #define RCC_PLLMul_16 ((uint32_t)0x00380000) + #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \ + ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ + ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ + ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ + ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \ + ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \ + ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \ + ((MUL) == RCC_PLLMul_16)) + +#else + #define RCC_PLLMul_4 ((uint32_t)0x00080000) + #define RCC_PLLMul_5 ((uint32_t)0x000C0000) + #define RCC_PLLMul_6 ((uint32_t)0x00100000) + #define RCC_PLLMul_7 ((uint32_t)0x00140000) + #define RCC_PLLMul_8 ((uint32_t)0x00180000) + #define RCC_PLLMul_9 ((uint32_t)0x001C0000) + #define RCC_PLLMul_6_5 ((uint32_t)0x00340000) + + #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ + ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ + ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ + ((MUL) == RCC_PLLMul_6_5)) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup PREDIV1_division_factor + * @{ + */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + #define RCC_PREDIV1_Div1 ((uint32_t)0x00000000) + #define RCC_PREDIV1_Div2 ((uint32_t)0x00000001) + #define RCC_PREDIV1_Div3 ((uint32_t)0x00000002) + #define RCC_PREDIV1_Div4 ((uint32_t)0x00000003) + #define RCC_PREDIV1_Div5 ((uint32_t)0x00000004) + #define RCC_PREDIV1_Div6 ((uint32_t)0x00000005) + #define RCC_PREDIV1_Div7 ((uint32_t)0x00000006) + #define RCC_PREDIV1_Div8 ((uint32_t)0x00000007) + #define RCC_PREDIV1_Div9 ((uint32_t)0x00000008) + #define RCC_PREDIV1_Div10 ((uint32_t)0x00000009) + #define RCC_PREDIV1_Div11 ((uint32_t)0x0000000A) + #define RCC_PREDIV1_Div12 ((uint32_t)0x0000000B) + #define RCC_PREDIV1_Div13 ((uint32_t)0x0000000C) + #define RCC_PREDIV1_Div14 ((uint32_t)0x0000000D) + #define RCC_PREDIV1_Div15 ((uint32_t)0x0000000E) + #define RCC_PREDIV1_Div16 ((uint32_t)0x0000000F) + + #define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \ + ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \ + ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \ + ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \ + ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \ + ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \ + ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \ + ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16)) +#endif +/** + * @} + */ + + +/** @defgroup PREDIV1_clock_source + * @{ + */ +#ifdef STM32F10X_CL +/* PREDIV1 clock source (for STM32 connectivity line devices) */ + #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) + #define RCC_PREDIV1_Source_PLL2 ((uint32_t)0x00010000) + + #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE) || \ + ((SOURCE) == RCC_PREDIV1_Source_PLL2)) +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/* PREDIV1 clock source (for STM32 Value line devices) */ + #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) + + #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE)) +#endif +/** + * @} + */ + +#ifdef STM32F10X_CL +/** @defgroup PREDIV2_division_factor + * @{ + */ + + #define RCC_PREDIV2_Div1 ((uint32_t)0x00000000) + #define RCC_PREDIV2_Div2 ((uint32_t)0x00000010) + #define RCC_PREDIV2_Div3 ((uint32_t)0x00000020) + #define RCC_PREDIV2_Div4 ((uint32_t)0x00000030) + #define RCC_PREDIV2_Div5 ((uint32_t)0x00000040) + #define RCC_PREDIV2_Div6 ((uint32_t)0x00000050) + #define RCC_PREDIV2_Div7 ((uint32_t)0x00000060) + #define RCC_PREDIV2_Div8 ((uint32_t)0x00000070) + #define RCC_PREDIV2_Div9 ((uint32_t)0x00000080) + #define RCC_PREDIV2_Div10 ((uint32_t)0x00000090) + #define RCC_PREDIV2_Div11 ((uint32_t)0x000000A0) + #define RCC_PREDIV2_Div12 ((uint32_t)0x000000B0) + #define RCC_PREDIV2_Div13 ((uint32_t)0x000000C0) + #define RCC_PREDIV2_Div14 ((uint32_t)0x000000D0) + #define RCC_PREDIV2_Div15 ((uint32_t)0x000000E0) + #define RCC_PREDIV2_Div16 ((uint32_t)0x000000F0) + + #define IS_RCC_PREDIV2(PREDIV2) (((PREDIV2) == RCC_PREDIV2_Div1) || ((PREDIV2) == RCC_PREDIV2_Div2) || \ + ((PREDIV2) == RCC_PREDIV2_Div3) || ((PREDIV2) == RCC_PREDIV2_Div4) || \ + ((PREDIV2) == RCC_PREDIV2_Div5) || ((PREDIV2) == RCC_PREDIV2_Div6) || \ + ((PREDIV2) == RCC_PREDIV2_Div7) || ((PREDIV2) == RCC_PREDIV2_Div8) || \ + ((PREDIV2) == RCC_PREDIV2_Div9) || ((PREDIV2) == RCC_PREDIV2_Div10) || \ + ((PREDIV2) == RCC_PREDIV2_Div11) || ((PREDIV2) == RCC_PREDIV2_Div12) || \ + ((PREDIV2) == RCC_PREDIV2_Div13) || ((PREDIV2) == RCC_PREDIV2_Div14) || \ + ((PREDIV2) == RCC_PREDIV2_Div15) || ((PREDIV2) == RCC_PREDIV2_Div16)) +/** + * @} + */ + + +/** @defgroup PLL2_multiplication_factor + * @{ + */ + + #define RCC_PLL2Mul_8 ((uint32_t)0x00000600) + #define RCC_PLL2Mul_9 ((uint32_t)0x00000700) + #define RCC_PLL2Mul_10 ((uint32_t)0x00000800) + #define RCC_PLL2Mul_11 ((uint32_t)0x00000900) + #define RCC_PLL2Mul_12 ((uint32_t)0x00000A00) + #define RCC_PLL2Mul_13 ((uint32_t)0x00000B00) + #define RCC_PLL2Mul_14 ((uint32_t)0x00000C00) + #define RCC_PLL2Mul_16 ((uint32_t)0x00000E00) + #define RCC_PLL2Mul_20 ((uint32_t)0x00000F00) + + #define IS_RCC_PLL2_MUL(MUL) (((MUL) == RCC_PLL2Mul_8) || ((MUL) == RCC_PLL2Mul_9) || \ + ((MUL) == RCC_PLL2Mul_10) || ((MUL) == RCC_PLL2Mul_11) || \ + ((MUL) == RCC_PLL2Mul_12) || ((MUL) == RCC_PLL2Mul_13) || \ + ((MUL) == RCC_PLL2Mul_14) || ((MUL) == RCC_PLL2Mul_16) || \ + ((MUL) == RCC_PLL2Mul_20)) +/** + * @} + */ + + +/** @defgroup PLL3_multiplication_factor + * @{ + */ + + #define RCC_PLL3Mul_8 ((uint32_t)0x00006000) + #define RCC_PLL3Mul_9 ((uint32_t)0x00007000) + #define RCC_PLL3Mul_10 ((uint32_t)0x00008000) + #define RCC_PLL3Mul_11 ((uint32_t)0x00009000) + #define RCC_PLL3Mul_12 ((uint32_t)0x0000A000) + #define RCC_PLL3Mul_13 ((uint32_t)0x0000B000) + #define RCC_PLL3Mul_14 ((uint32_t)0x0000C000) + #define RCC_PLL3Mul_16 ((uint32_t)0x0000E000) + #define RCC_PLL3Mul_20 ((uint32_t)0x0000F000) + + #define IS_RCC_PLL3_MUL(MUL) (((MUL) == RCC_PLL3Mul_8) || ((MUL) == RCC_PLL3Mul_9) || \ + ((MUL) == RCC_PLL3Mul_10) || ((MUL) == RCC_PLL3Mul_11) || \ + ((MUL) == RCC_PLL3Mul_12) || ((MUL) == RCC_PLL3Mul_13) || \ + ((MUL) == RCC_PLL3Mul_14) || ((MUL) == RCC_PLL3Mul_16) || \ + ((MUL) == RCC_PLL3Mul_20)) +/** + * @} + */ + +#endif /* STM32F10X_CL */ + + +/** @defgroup System_clock_source + * @{ + */ + +#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000) +#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001) +#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002) +#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \ + ((SOURCE) == RCC_SYSCLKSource_HSE) || \ + ((SOURCE) == RCC_SYSCLKSource_PLLCLK)) +/** + * @} + */ + +/** @defgroup AHB_clock_source + * @{ + */ + +#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000) +#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080) +#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090) +#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0) +#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0) +#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0) +#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0) +#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0) +#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0) +#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \ + ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \ + ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \ + ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \ + ((HCLK) == RCC_SYSCLK_Div512)) +/** + * @} + */ + +/** @defgroup APB1_APB2_clock_source + * @{ + */ + +#define RCC_HCLK_Div1 ((uint32_t)0x00000000) +#define RCC_HCLK_Div2 ((uint32_t)0x00000400) +#define RCC_HCLK_Div4 ((uint32_t)0x00000500) +#define RCC_HCLK_Div8 ((uint32_t)0x00000600) +#define RCC_HCLK_Div16 ((uint32_t)0x00000700) +#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \ + ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \ + ((PCLK) == RCC_HCLK_Div16)) +/** + * @} + */ + +/** @defgroup RCC_Interrupt_source + * @{ + */ + +#define RCC_IT_LSIRDY ((uint8_t)0x01) +#define RCC_IT_LSERDY ((uint8_t)0x02) +#define RCC_IT_HSIRDY ((uint8_t)0x04) +#define RCC_IT_HSERDY ((uint8_t)0x08) +#define RCC_IT_PLLRDY ((uint8_t)0x10) +#define RCC_IT_CSS ((uint8_t)0x80) + +#ifndef STM32F10X_CL + #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xE0) == 0x00) && ((IT) != 0x00)) + #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ + ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ + ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS)) + #define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x60) == 0x00) && ((IT) != 0x00)) +#else + #define RCC_IT_PLL2RDY ((uint8_t)0x20) + #define RCC_IT_PLL3RDY ((uint8_t)0x40) + #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00)) + #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ + ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ + ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \ + ((IT) == RCC_IT_PLL2RDY) || ((IT) == RCC_IT_PLL3RDY)) + #define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00) +#endif /* STM32F10X_CL */ + + +/** + * @} + */ + +#ifndef STM32F10X_CL +/** @defgroup USB_Device_clock_source + * @{ + */ + + #define RCC_USBCLKSource_PLLCLK_1Div5 ((uint8_t)0x00) + #define RCC_USBCLKSource_PLLCLK_Div1 ((uint8_t)0x01) + + #define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \ + ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1)) +/** + * @} + */ +#else +/** @defgroup USB_OTG_FS_clock_source + * @{ + */ + #define RCC_OTGFSCLKSource_PLLVCO_Div3 ((uint8_t)0x00) + #define RCC_OTGFSCLKSource_PLLVCO_Div2 ((uint8_t)0x01) + + #define IS_RCC_OTGFSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div3) || \ + ((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div2)) +/** + * @} + */ +#endif /* STM32F10X_CL */ + + +#ifdef STM32F10X_CL +/** @defgroup I2S2_clock_source + * @{ + */ + #define RCC_I2S2CLKSource_SYSCLK ((uint8_t)0x00) + #define RCC_I2S2CLKSource_PLL3_VCO ((uint8_t)0x01) + + #define IS_RCC_I2S2CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || \ + ((SOURCE) == RCC_I2S2CLKSource_PLL3_VCO)) +/** + * @} + */ + +/** @defgroup I2S3_clock_source + * @{ + */ + #define RCC_I2S3CLKSource_SYSCLK ((uint8_t)0x00) + #define RCC_I2S3CLKSource_PLL3_VCO ((uint8_t)0x01) + + #define IS_RCC_I2S3CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S3CLKSource_SYSCLK) || \ + ((SOURCE) == RCC_I2S3CLKSource_PLL3_VCO)) +/** + * @} + */ +#endif /* STM32F10X_CL */ + + +/** @defgroup ADC_clock_source + * @{ + */ + +#define RCC_PCLK2_Div2 ((uint32_t)0x00000000) +#define RCC_PCLK2_Div4 ((uint32_t)0x00004000) +#define RCC_PCLK2_Div6 ((uint32_t)0x00008000) +#define RCC_PCLK2_Div8 ((uint32_t)0x0000C000) +#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \ + ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8)) +/** + * @} + */ + +/** @defgroup LSE_configuration + * @{ + */ + +#define RCC_LSE_OFF ((uint8_t)0x00) +#define RCC_LSE_ON ((uint8_t)0x01) +#define RCC_LSE_Bypass ((uint8_t)0x04) +#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ + ((LSE) == RCC_LSE_Bypass)) +/** + * @} + */ + +/** @defgroup RTC_clock_source + * @{ + */ + +#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100) +#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200) +#define RCC_RTCCLKSource_HSE_Div128 ((uint32_t)0x00000300) +#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \ + ((SOURCE) == RCC_RTCCLKSource_LSI) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div128)) +/** + * @} + */ + +/** @defgroup AHB_peripheral + * @{ + */ + +#define RCC_AHBPeriph_DMA1 ((uint32_t)0x00000001) +#define RCC_AHBPeriph_DMA2 ((uint32_t)0x00000002) +#define RCC_AHBPeriph_SRAM ((uint32_t)0x00000004) +#define RCC_AHBPeriph_FLITF ((uint32_t)0x00000010) +#define RCC_AHBPeriph_CRC ((uint32_t)0x00000040) + +#ifndef STM32F10X_CL + #define RCC_AHBPeriph_FSMC ((uint32_t)0x00000100) + #define RCC_AHBPeriph_SDIO ((uint32_t)0x00000400) + #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00)) +#else + #define RCC_AHBPeriph_OTG_FS ((uint32_t)0x00001000) + #define RCC_AHBPeriph_ETH_MAC ((uint32_t)0x00004000) + #define RCC_AHBPeriph_ETH_MAC_Tx ((uint32_t)0x00008000) + #define RCC_AHBPeriph_ETH_MAC_Rx ((uint32_t)0x00010000) + + #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFE2FA8) == 0x00) && ((PERIPH) != 0x00)) + #define IS_RCC_AHB_PERIPH_RESET(PERIPH) ((((PERIPH) & 0xFFFFAFFF) == 0x00) && ((PERIPH) != 0x00)) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup APB2_peripheral + * @{ + */ + +#define RCC_APB2Periph_AFIO ((uint32_t)0x00000001) +#define RCC_APB2Periph_GPIOA ((uint32_t)0x00000004) +#define RCC_APB2Periph_GPIOB ((uint32_t)0x00000008) +#define RCC_APB2Periph_GPIOC ((uint32_t)0x00000010) +#define RCC_APB2Periph_GPIOD ((uint32_t)0x00000020) +#define RCC_APB2Periph_GPIOE ((uint32_t)0x00000040) +#define RCC_APB2Periph_GPIOF ((uint32_t)0x00000080) +#define RCC_APB2Periph_GPIOG ((uint32_t)0x00000100) +#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000200) +#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000400) +#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000800) +#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000) +#define RCC_APB2Periph_TIM8 ((uint32_t)0x00002000) +#define RCC_APB2Periph_USART1 ((uint32_t)0x00004000) +#define RCC_APB2Periph_ADC3 ((uint32_t)0x00008000) +#define RCC_APB2Periph_TIM15 ((uint32_t)0x00010000) +#define RCC_APB2Periph_TIM16 ((uint32_t)0x00020000) +#define RCC_APB2Periph_TIM17 ((uint32_t)0x00040000) +#define RCC_APB2Periph_TIM9 ((uint32_t)0x00080000) +#define RCC_APB2Periph_TIM10 ((uint32_t)0x00100000) +#define RCC_APB2Periph_TIM11 ((uint32_t)0x00200000) + +#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFC00002) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup APB1_peripheral + * @{ + */ + +#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001) +#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002) +#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004) +#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008) +#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010) +#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020) +#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040) +#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080) +#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100) +#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800) +#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000) +#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000) +#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000) +#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000) +#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000) +#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000) +#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000) +#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000) +#define RCC_APB1Periph_USB ((uint32_t)0x00800000) +#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000) +#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000) +#define RCC_APB1Periph_BKP ((uint32_t)0x08000000) +#define RCC_APB1Periph_PWR ((uint32_t)0x10000000) +#define RCC_APB1Periph_DAC ((uint32_t)0x20000000) +#define RCC_APB1Periph_CEC ((uint32_t)0x40000000) + +#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x81013600) == 0x00) && ((PERIPH) != 0x00)) + +/** + * @} + */ + +/** @defgroup Clock_source_to_output_on_MCO_pin + * @{ + */ + +#define RCC_MCO_NoClock ((uint8_t)0x00) +#define RCC_MCO_SYSCLK ((uint8_t)0x04) +#define RCC_MCO_HSI ((uint8_t)0x05) +#define RCC_MCO_HSE ((uint8_t)0x06) +#define RCC_MCO_PLLCLK_Div2 ((uint8_t)0x07) + +#ifndef STM32F10X_CL + #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ + ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ + ((MCO) == RCC_MCO_PLLCLK_Div2)) +#else + #define RCC_MCO_PLL2CLK ((uint8_t)0x08) + #define RCC_MCO_PLL3CLK_Div2 ((uint8_t)0x09) + #define RCC_MCO_XT1 ((uint8_t)0x0A) + #define RCC_MCO_PLL3CLK ((uint8_t)0x0B) + + #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ + ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ + ((MCO) == RCC_MCO_PLLCLK_Div2) || ((MCO) == RCC_MCO_PLL2CLK) || \ + ((MCO) == RCC_MCO_PLL3CLK_Div2) || ((MCO) == RCC_MCO_XT1) || \ + ((MCO) == RCC_MCO_PLL3CLK)) +#endif /* STM32F10X_CL */ + +/** + * @} + */ + +/** @defgroup RCC_Flag + * @{ + */ + +#define RCC_FLAG_HSIRDY ((uint8_t)0x21) +#define RCC_FLAG_HSERDY ((uint8_t)0x31) +#define RCC_FLAG_PLLRDY ((uint8_t)0x39) +#define RCC_FLAG_LSERDY ((uint8_t)0x41) +#define RCC_FLAG_LSIRDY ((uint8_t)0x61) +#define RCC_FLAG_PINRST ((uint8_t)0x7A) +#define RCC_FLAG_PORRST ((uint8_t)0x7B) +#define RCC_FLAG_SFTRST ((uint8_t)0x7C) +#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) +#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) +#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) + +#ifndef STM32F10X_CL + #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ + ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ + ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ + ((FLAG) == RCC_FLAG_LPWRRST)) +#else + #define RCC_FLAG_PLL2RDY ((uint8_t)0x3B) + #define RCC_FLAG_PLL3RDY ((uint8_t)0x3D) + #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_PLL2RDY) || ((FLAG) == RCC_FLAG_PLL3RDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ + ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ + ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ + ((FLAG) == RCC_FLAG_LPWRRST)) +#endif /* STM32F10X_CL */ + +#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RCC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions + * @{ + */ + +void RCC_DeInit(void); +void RCC_HSEConfig(uint32_t RCC_HSE); +ErrorStatus RCC_WaitForHSEStartUp(void); +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue); +void RCC_HSICmd(FunctionalState NewState); +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul); +void RCC_PLLCmd(FunctionalState NewState); + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div); +#endif + +#ifdef STM32F10X_CL + void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div); + void RCC_PLL2Config(uint32_t RCC_PLL2Mul); + void RCC_PLL2Cmd(FunctionalState NewState); + void RCC_PLL3Config(uint32_t RCC_PLL3Mul); + void RCC_PLL3Cmd(FunctionalState NewState); +#endif /* STM32F10X_CL */ + +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource); +uint8_t RCC_GetSYSCLKSource(void); +void RCC_HCLKConfig(uint32_t RCC_SYSCLK); +void RCC_PCLK1Config(uint32_t RCC_HCLK); +void RCC_PCLK2Config(uint32_t RCC_HCLK); +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState); + +#ifndef STM32F10X_CL + void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource); +#else + void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource); +#endif /* STM32F10X_CL */ + +void RCC_ADCCLKConfig(uint32_t RCC_PCLK2); + +#ifdef STM32F10X_CL + void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource); + void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource); +#endif /* STM32F10X_CL */ + +void RCC_LSEConfig(uint8_t RCC_LSE); +void RCC_LSICmd(FunctionalState NewState); +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource); +void RCC_RTCCLKCmd(FunctionalState NewState); +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks); +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); + +#ifdef STM32F10X_CL +void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +#endif /* STM32F10X_CL */ + +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); +void RCC_BackupResetCmd(FunctionalState NewState); +void RCC_ClockSecuritySystemCmd(FunctionalState NewState); +void RCC_MCOConfig(uint8_t RCC_MCO); +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG); +void RCC_ClearFlag(void); +ITStatus RCC_GetITStatus(uint8_t RCC_IT); +void RCC_ClearITPendingBit(uint8_t RCC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_RCC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_rtc.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_rtc.h new file mode 100644 index 0000000..fd8beb5 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_rtc.h @@ -0,0 +1,135 @@ +/** + ****************************************************************************** + * @file stm32f10x_rtc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the RTC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_RTC_H +#define __STM32F10x_RTC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RTC + * @{ + */ + +/** @defgroup RTC_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Constants + * @{ + */ + +/** @defgroup RTC_interrupts_define + * @{ + */ + +#define RTC_IT_OW ((uint16_t)0x0004) /*!< Overflow interrupt */ +#define RTC_IT_ALR ((uint16_t)0x0002) /*!< Alarm interrupt */ +#define RTC_IT_SEC ((uint16_t)0x0001) /*!< Second interrupt */ +#define IS_RTC_IT(IT) ((((IT) & (uint16_t)0xFFF8) == 0x00) && ((IT) != 0x00)) +#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_OW) || ((IT) == RTC_IT_ALR) || \ + ((IT) == RTC_IT_SEC)) +/** + * @} + */ + +/** @defgroup RTC_interrupts_flags + * @{ + */ + +#define RTC_FLAG_RTOFF ((uint16_t)0x0020) /*!< RTC Operation OFF flag */ +#define RTC_FLAG_RSF ((uint16_t)0x0008) /*!< Registers Synchronized flag */ +#define RTC_FLAG_OW ((uint16_t)0x0004) /*!< Overflow flag */ +#define RTC_FLAG_ALR ((uint16_t)0x0002) /*!< Alarm flag */ +#define RTC_FLAG_SEC ((uint16_t)0x0001) /*!< Second flag */ +#define IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFF0) == 0x00) && ((FLAG) != 0x00)) +#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RTOFF) || ((FLAG) == RTC_FLAG_RSF) || \ + ((FLAG) == RTC_FLAG_OW) || ((FLAG) == RTC_FLAG_ALR) || \ + ((FLAG) == RTC_FLAG_SEC)) +#define IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions + * @{ + */ + +void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState); +void RTC_EnterConfigMode(void); +void RTC_ExitConfigMode(void); +uint32_t RTC_GetCounter(void); +void RTC_SetCounter(uint32_t CounterValue); +void RTC_SetPrescaler(uint32_t PrescalerValue); +void RTC_SetAlarm(uint32_t AlarmValue); +uint32_t RTC_GetDivider(void); +void RTC_WaitForLastTask(void); +void RTC_WaitForSynchro(void); +FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG); +void RTC_ClearFlag(uint16_t RTC_FLAG); +ITStatus RTC_GetITStatus(uint16_t RTC_IT); +void RTC_ClearITPendingBit(uint16_t RTC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_RTC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_sdio.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_sdio.h new file mode 100644 index 0000000..81c058a --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_sdio.h @@ -0,0 +1,531 @@ +/** + ****************************************************************************** + * @file stm32f10x_sdio.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the SDIO firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_SDIO_H +#define __STM32F10x_SDIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SDIO + * @{ + */ + +/** @defgroup SDIO_Exported_Types + * @{ + */ + +typedef struct +{ + uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SDIO_Clock_Edge */ + + uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is + enabled or disabled. + This parameter can be a value of @ref SDIO_Clock_Bypass */ + + uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or + disabled when the bus is idle. + This parameter can be a value of @ref SDIO_Clock_Power_Save */ + + uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width. + This parameter can be a value of @ref SDIO_Bus_Wide */ + + uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. + This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ + + uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. + This parameter can be a value between 0x00 and 0xFF. */ + +} SDIO_InitTypeDef; + +typedef struct +{ + uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent + to a card as part of a command message. If a command + contains an argument, it must be loaded into this register + before writing the command to the command register */ + + uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */ + + uint32_t SDIO_Response; /*!< Specifies the SDIO response type. + This parameter can be a value of @ref SDIO_Response_Type */ + + uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled. + This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ + + uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_CPSM_State */ +} SDIO_CmdInitTypeDef; + +typedef struct +{ + uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ + + uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */ + + uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer. + This parameter can be a value of @ref SDIO_Data_Block_Size */ + + uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer + is a read or write. + This parameter can be a value of @ref SDIO_Transfer_Direction */ + + uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode. + This parameter can be a value of @ref SDIO_Transfer_Type */ + + uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_DPSM_State */ +} SDIO_DataInitTypeDef; + +/** + * @} + */ + +/** @defgroup SDIO_Exported_Constants + * @{ + */ + +/** @defgroup SDIO_Clock_Edge + * @{ + */ + +#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000) +#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000) +#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \ + ((EDGE) == SDIO_ClockEdge_Falling)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Bypass + * @{ + */ + +#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000) +#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400) +#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \ + ((BYPASS) == SDIO_ClockBypass_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Power_Save + * @{ + */ + +#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000) +#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200) +#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \ + ((SAVE) == SDIO_ClockPowerSave_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Bus_Wide + * @{ + */ + +#define SDIO_BusWide_1b ((uint32_t)0x00000000) +#define SDIO_BusWide_4b ((uint32_t)0x00000800) +#define SDIO_BusWide_8b ((uint32_t)0x00001000) +#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \ + ((WIDE) == SDIO_BusWide_8b)) + +/** + * @} + */ + +/** @defgroup SDIO_Hardware_Flow_Control + * @{ + */ + +#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000) +#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000) +#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \ + ((CONTROL) == SDIO_HardwareFlowControl_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Power_State + * @{ + */ + +#define SDIO_PowerState_OFF ((uint32_t)0x00000000) +#define SDIO_PowerState_ON ((uint32_t)0x00000003) +#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) +/** + * @} + */ + + +/** @defgroup SDIO_Interrupt_sources + * @{ + */ + +#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_IT_RXOVERR ((uint32_t)0x00000020) +#define SDIO_IT_CMDREND ((uint32_t)0x00000040) +#define SDIO_IT_CMDSENT ((uint32_t)0x00000080) +#define SDIO_IT_DATAEND ((uint32_t)0x00000100) +#define SDIO_IT_STBITERR ((uint32_t)0x00000200) +#define SDIO_IT_DBCKEND ((uint32_t)0x00000400) +#define SDIO_IT_CMDACT ((uint32_t)0x00000800) +#define SDIO_IT_TXACT ((uint32_t)0x00001000) +#define SDIO_IT_RXACT ((uint32_t)0x00002000) +#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_IT_TXDAVL ((uint32_t)0x00100000) +#define SDIO_IT_RXDAVL ((uint32_t)0x00200000) +#define SDIO_IT_SDIOIT ((uint32_t)0x00400000) +#define SDIO_IT_CEATAEND ((uint32_t)0x00800000) +#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00)) +/** + * @} + */ + +/** @defgroup SDIO_Command_Index + * @{ + */ + +#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) +/** + * @} + */ + +/** @defgroup SDIO_Response_Type + * @{ + */ + +#define SDIO_Response_No ((uint32_t)0x00000000) +#define SDIO_Response_Short ((uint32_t)0x00000040) +#define SDIO_Response_Long ((uint32_t)0x000000C0) +#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \ + ((RESPONSE) == SDIO_Response_Short) || \ + ((RESPONSE) == SDIO_Response_Long)) +/** + * @} + */ + +/** @defgroup SDIO_Wait_Interrupt_State + * @{ + */ + +#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */ +#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */ +#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */ +#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \ + ((WAIT) == SDIO_Wait_Pend)) +/** + * @} + */ + +/** @defgroup SDIO_CPSM_State + * @{ + */ + +#define SDIO_CPSM_Disable ((uint32_t)0x00000000) +#define SDIO_CPSM_Enable ((uint32_t)0x00000400) +#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) +/** + * @} + */ + +/** @defgroup SDIO_Response_Registers + * @{ + */ + +#define SDIO_RESP1 ((uint32_t)0x00000000) +#define SDIO_RESP2 ((uint32_t)0x00000004) +#define SDIO_RESP3 ((uint32_t)0x00000008) +#define SDIO_RESP4 ((uint32_t)0x0000000C) +#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \ + ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4)) +/** + * @} + */ + +/** @defgroup SDIO_Data_Length + * @{ + */ + +#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) +/** + * @} + */ + +/** @defgroup SDIO_Data_Block_Size + * @{ + */ + +#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000) +#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010) +#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020) +#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030) +#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040) +#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050) +#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060) +#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070) +#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080) +#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090) +#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0) +#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0) +#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0) +#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0) +#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0) +#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \ + ((SIZE) == SDIO_DataBlockSize_2b) || \ + ((SIZE) == SDIO_DataBlockSize_4b) || \ + ((SIZE) == SDIO_DataBlockSize_8b) || \ + ((SIZE) == SDIO_DataBlockSize_16b) || \ + ((SIZE) == SDIO_DataBlockSize_32b) || \ + ((SIZE) == SDIO_DataBlockSize_64b) || \ + ((SIZE) == SDIO_DataBlockSize_128b) || \ + ((SIZE) == SDIO_DataBlockSize_256b) || \ + ((SIZE) == SDIO_DataBlockSize_512b) || \ + ((SIZE) == SDIO_DataBlockSize_1024b) || \ + ((SIZE) == SDIO_DataBlockSize_2048b) || \ + ((SIZE) == SDIO_DataBlockSize_4096b) || \ + ((SIZE) == SDIO_DataBlockSize_8192b) || \ + ((SIZE) == SDIO_DataBlockSize_16384b)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Direction + * @{ + */ + +#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000) +#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002) +#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \ + ((DIR) == SDIO_TransferDir_ToSDIO)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Type + * @{ + */ + +#define SDIO_TransferMode_Block ((uint32_t)0x00000000) +#define SDIO_TransferMode_Stream ((uint32_t)0x00000004) +#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \ + ((MODE) == SDIO_TransferMode_Block)) +/** + * @} + */ + +/** @defgroup SDIO_DPSM_State + * @{ + */ + +#define SDIO_DPSM_Disable ((uint32_t)0x00000000) +#define SDIO_DPSM_Enable ((uint32_t)0x00000001) +#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) +/** + * @} + */ + +/** @defgroup SDIO_Flags + * @{ + */ + +#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020) +#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040) +#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080) +#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100) +#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200) +#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400) +#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800) +#define SDIO_FLAG_TXACT ((uint32_t)0x00001000) +#define SDIO_FLAG_RXACT ((uint32_t)0x00002000) +#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000) +#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000) +#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000) +#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000) +#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_DCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_CTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_DTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_TXUNDERR) || \ + ((FLAG) == SDIO_FLAG_RXOVERR) || \ + ((FLAG) == SDIO_FLAG_CMDREND) || \ + ((FLAG) == SDIO_FLAG_CMDSENT) || \ + ((FLAG) == SDIO_FLAG_DATAEND) || \ + ((FLAG) == SDIO_FLAG_STBITERR) || \ + ((FLAG) == SDIO_FLAG_DBCKEND) || \ + ((FLAG) == SDIO_FLAG_CMDACT) || \ + ((FLAG) == SDIO_FLAG_TXACT) || \ + ((FLAG) == SDIO_FLAG_RXACT) || \ + ((FLAG) == SDIO_FLAG_TXFIFOHE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOHF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOF) || \ + ((FLAG) == SDIO_FLAG_RXFIFOF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOE) || \ + ((FLAG) == SDIO_FLAG_TXDAVL) || \ + ((FLAG) == SDIO_FLAG_RXDAVL) || \ + ((FLAG) == SDIO_FLAG_SDIOIT) || \ + ((FLAG) == SDIO_FLAG_CEATAEND)) + +#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00)) + +#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ + ((IT) == SDIO_IT_DCRCFAIL) || \ + ((IT) == SDIO_IT_CTIMEOUT) || \ + ((IT) == SDIO_IT_DTIMEOUT) || \ + ((IT) == SDIO_IT_TXUNDERR) || \ + ((IT) == SDIO_IT_RXOVERR) || \ + ((IT) == SDIO_IT_CMDREND) || \ + ((IT) == SDIO_IT_CMDSENT) || \ + ((IT) == SDIO_IT_DATAEND) || \ + ((IT) == SDIO_IT_STBITERR) || \ + ((IT) == SDIO_IT_DBCKEND) || \ + ((IT) == SDIO_IT_CMDACT) || \ + ((IT) == SDIO_IT_TXACT) || \ + ((IT) == SDIO_IT_RXACT) || \ + ((IT) == SDIO_IT_TXFIFOHE) || \ + ((IT) == SDIO_IT_RXFIFOHF) || \ + ((IT) == SDIO_IT_TXFIFOF) || \ + ((IT) == SDIO_IT_RXFIFOF) || \ + ((IT) == SDIO_IT_TXFIFOE) || \ + ((IT) == SDIO_IT_RXFIFOE) || \ + ((IT) == SDIO_IT_TXDAVL) || \ + ((IT) == SDIO_IT_RXDAVL) || \ + ((IT) == SDIO_IT_SDIOIT) || \ + ((IT) == SDIO_IT_CEATAEND)) + +#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00)) + +/** + * @} + */ + +/** @defgroup SDIO_Read_Wait_Mode + * @{ + */ + +#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001) +#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000) +#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \ + ((MODE) == SDIO_ReadWaitMode_DATA2)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SDIO_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Exported_Functions + * @{ + */ + +void SDIO_DeInit(void); +void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct); +void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct); +void SDIO_ClockCmd(FunctionalState NewState); +void SDIO_SetPowerState(uint32_t SDIO_PowerState); +uint32_t SDIO_GetPowerState(void); +void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState); +void SDIO_DMACmd(FunctionalState NewState); +void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); +void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct); +uint8_t SDIO_GetCommandResponse(void); +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); +void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct); +void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct); +uint32_t SDIO_GetDataCounter(void); +uint32_t SDIO_ReadData(void); +void SDIO_WriteData(uint32_t Data); +uint32_t SDIO_GetFIFOCount(void); +void SDIO_StartSDIOReadWait(FunctionalState NewState); +void SDIO_StopSDIOReadWait(FunctionalState NewState); +void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); +void SDIO_SetSDIOOperation(FunctionalState NewState); +void SDIO_SendSDIOSuspendCmd(FunctionalState NewState); +void SDIO_CommandCompletionCmd(FunctionalState NewState); +void SDIO_CEATAITCmd(FunctionalState NewState); +void SDIO_SendCEATACmd(FunctionalState NewState); +FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG); +void SDIO_ClearFlag(uint32_t SDIO_FLAG); +ITStatus SDIO_GetITStatus(uint32_t SDIO_IT); +void SDIO_ClearITPendingBit(uint32_t SDIO_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_SDIO_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_spi.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_spi.h new file mode 100644 index 0000000..23cc26d --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_spi.h @@ -0,0 +1,487 @@ +/** + ****************************************************************************** + * @file stm32f10x_spi.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the SPI firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_SPI_H +#define __STM32F10x_SPI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/** @defgroup SPI_Exported_Types + * @{ + */ + +/** + * @brief SPI Init structure definition + */ + +typedef struct +{ + uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_data_direction */ + + uint16_t SPI_Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_mode */ + + uint16_t SPI_DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_data_size */ + + uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler. + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */ +}SPI_InitTypeDef; + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + + uint16_t I2S_Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ +}I2S_InitTypeDef; + +/** + * @} + */ + +/** @defgroup SPI_Exported_Constants + * @{ + */ + +#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \ + ((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3)) + +#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3)) + +/** @defgroup SPI_data_direction + * @{ + */ + +#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) +#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) +#define SPI_Direction_1Line_Rx ((uint16_t)0x8000) +#define SPI_Direction_1Line_Tx ((uint16_t)0xC000) +#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ + ((MODE) == SPI_Direction_2Lines_RxOnly) || \ + ((MODE) == SPI_Direction_1Line_Rx) || \ + ((MODE) == SPI_Direction_1Line_Tx)) +/** + * @} + */ + +/** @defgroup SPI_mode + * @{ + */ + +#define SPI_Mode_Master ((uint16_t)0x0104) +#define SPI_Mode_Slave ((uint16_t)0x0000) +#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ + ((MODE) == SPI_Mode_Slave)) +/** + * @} + */ + +/** @defgroup SPI_data_size + * @{ + */ + +#define SPI_DataSize_16b ((uint16_t)0x0800) +#define SPI_DataSize_8b ((uint16_t)0x0000) +#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ + ((DATASIZE) == SPI_DataSize_8b)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity + * @{ + */ + +#define SPI_CPOL_Low ((uint16_t)0x0000) +#define SPI_CPOL_High ((uint16_t)0x0002) +#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ + ((CPOL) == SPI_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase + * @{ + */ + +#define SPI_CPHA_1Edge ((uint16_t)0x0000) +#define SPI_CPHA_2Edge ((uint16_t)0x0001) +#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ + ((CPHA) == SPI_CPHA_2Edge)) +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management + * @{ + */ + +#define SPI_NSS_Soft ((uint16_t)0x0200) +#define SPI_NSS_Hard ((uint16_t)0x0000) +#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ + ((NSS) == SPI_NSS_Hard)) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler + * @{ + */ + +#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) +#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) +#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) +#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) +#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) +#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) +#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) +#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) +#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_256)) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission + * @{ + */ + +#define SPI_FirstBit_MSB ((uint16_t)0x0000) +#define SPI_FirstBit_LSB ((uint16_t)0x0080) +#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ + ((BIT) == SPI_FirstBit_LSB)) +/** + * @} + */ + +/** @defgroup I2S_Mode + * @{ + */ + +#define I2S_Mode_SlaveTx ((uint16_t)0x0000) +#define I2S_Mode_SlaveRx ((uint16_t)0x0100) +#define I2S_Mode_MasterTx ((uint16_t)0x0200) +#define I2S_Mode_MasterRx ((uint16_t)0x0300) +#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ + ((MODE) == I2S_Mode_SlaveRx) || \ + ((MODE) == I2S_Mode_MasterTx) || \ + ((MODE) == I2S_Mode_MasterRx) ) +/** + * @} + */ + +/** @defgroup I2S_Standard + * @{ + */ + +#define I2S_Standard_Phillips ((uint16_t)0x0000) +#define I2S_Standard_MSB ((uint16_t)0x0010) +#define I2S_Standard_LSB ((uint16_t)0x0020) +#define I2S_Standard_PCMShort ((uint16_t)0x0030) +#define I2S_Standard_PCMLong ((uint16_t)0x00B0) +#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ + ((STANDARD) == I2S_Standard_MSB) || \ + ((STANDARD) == I2S_Standard_LSB) || \ + ((STANDARD) == I2S_Standard_PCMShort) || \ + ((STANDARD) == I2S_Standard_PCMLong)) +/** + * @} + */ + +/** @defgroup I2S_Data_Format + * @{ + */ + +#define I2S_DataFormat_16b ((uint16_t)0x0000) +#define I2S_DataFormat_16bextended ((uint16_t)0x0001) +#define I2S_DataFormat_24b ((uint16_t)0x0003) +#define I2S_DataFormat_32b ((uint16_t)0x0005) +#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ + ((FORMAT) == I2S_DataFormat_16bextended) || \ + ((FORMAT) == I2S_DataFormat_24b) || \ + ((FORMAT) == I2S_DataFormat_32b)) +/** + * @} + */ + +/** @defgroup I2S_MCLK_Output + * @{ + */ + +#define I2S_MCLKOutput_Enable ((uint16_t)0x0200) +#define I2S_MCLKOutput_Disable ((uint16_t)0x0000) +#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ + ((OUTPUT) == I2S_MCLKOutput_Disable)) +/** + * @} + */ + +/** @defgroup I2S_Audio_Frequency + * @{ + */ + +#define I2S_AudioFreq_192k ((uint32_t)192000) +#define I2S_AudioFreq_96k ((uint32_t)96000) +#define I2S_AudioFreq_48k ((uint32_t)48000) +#define I2S_AudioFreq_44k ((uint32_t)44100) +#define I2S_AudioFreq_32k ((uint32_t)32000) +#define I2S_AudioFreq_22k ((uint32_t)22050) +#define I2S_AudioFreq_16k ((uint32_t)16000) +#define I2S_AudioFreq_11k ((uint32_t)11025) +#define I2S_AudioFreq_8k ((uint32_t)8000) +#define I2S_AudioFreq_Default ((uint32_t)2) + +#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \ + ((FREQ) <= I2S_AudioFreq_192k)) || \ + ((FREQ) == I2S_AudioFreq_Default)) +/** + * @} + */ + +/** @defgroup I2S_Clock_Polarity + * @{ + */ + +#define I2S_CPOL_Low ((uint16_t)0x0000) +#define I2S_CPOL_High ((uint16_t)0x0008) +#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ + ((CPOL) == I2S_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_I2S_DMA_transfer_requests + * @{ + */ + +#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002) +#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001) +#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) +/** + * @} + */ + +/** @defgroup SPI_NSS_internal_software_management + * @{ + */ + +#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100) +#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) +#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ + ((INTERNAL) == SPI_NSSInternalSoft_Reset)) +/** + * @} + */ + +/** @defgroup SPI_CRC_Transmit_Receive + * @{ + */ + +#define SPI_CRC_Tx ((uint8_t)0x00) +#define SPI_CRC_Rx ((uint8_t)0x01) +#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) +/** + * @} + */ + +/** @defgroup SPI_direction_transmit_receive + * @{ + */ + +#define SPI_Direction_Rx ((uint16_t)0xBFFF) +#define SPI_Direction_Tx ((uint16_t)0x4000) +#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ + ((DIRECTION) == SPI_Direction_Tx)) +/** + * @} + */ + +/** @defgroup SPI_I2S_interrupts_definition + * @{ + */ + +#define SPI_I2S_IT_TXE ((uint8_t)0x71) +#define SPI_I2S_IT_RXNE ((uint8_t)0x60) +#define SPI_I2S_IT_ERR ((uint8_t)0x50) +#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == SPI_I2S_IT_RXNE) || \ + ((IT) == SPI_I2S_IT_ERR)) +#define SPI_I2S_IT_OVR ((uint8_t)0x56) +#define SPI_IT_MODF ((uint8_t)0x55) +#define SPI_IT_CRCERR ((uint8_t)0x54) +#define I2S_IT_UDR ((uint8_t)0x53) +#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR)) +#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == I2S_IT_UDR) || ((IT) == SPI_IT_CRCERR) || \ + ((IT) == SPI_IT_MODF) || ((IT) == SPI_I2S_IT_OVR)) +/** + * @} + */ + +/** @defgroup SPI_I2S_flags_definition + * @{ + */ + +#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001) +#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002) +#define I2S_FLAG_CHSIDE ((uint16_t)0x0004) +#define I2S_FLAG_UDR ((uint16_t)0x0008) +#define SPI_FLAG_CRCERR ((uint16_t)0x0010) +#define SPI_FLAG_MODF ((uint16_t)0x0020) +#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040) +#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080) +#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) +#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ + ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ + ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \ + ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)) +/** + * @} + */ + +/** @defgroup SPI_CRC_polynomial + * @{ + */ + +#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SPI_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions + * @{ + */ + +void SPI_I2S_DeInit(SPI_TypeDef* SPIx); +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); +void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data); +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx); +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize); +void SPI_TransmitCRC(SPI_TypeDef* SPIx); +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC); +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction); +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); +void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_SPI_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_tim.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_tim.h new file mode 100644 index 0000000..65bf76a --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_tim.h @@ -0,0 +1,1164 @@ +/** + ****************************************************************************** + * @file stm32f10x_tim.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the TIM firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_TIM_H +#define __STM32F10x_TIM_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/** @defgroup TIM_Exported_Types + * @{ + */ + +/** + * @brief TIM Time Base Init structure definition + * @note This structure is used with all TIMx except for TIM6 and TIM7. + */ + +typedef struct +{ + uint16_t TIM_Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between 0x0000 and 0xFFFF */ + + uint16_t TIM_CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint16_t TIM_Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between 0x0000 and 0xFFFF. */ + + uint16_t TIM_ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_Clock_Division_CKD */ + + uint8_t TIM_RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + This parameter must be a number between 0x00 and 0xFF. + @note This parameter is valid only for TIM1 and TIM8. */ +} TIM_TimeBaseInitTypeDef; + +/** + * @brief TIM Output Compare Init structure definition + */ + +typedef struct +{ + uint16_t TIM_OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint16_t TIM_OutputState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_Output_Compare_state */ + + uint16_t TIM_OutputNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_Output_Compare_N_state + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between 0x0000 and 0xFFFF */ + + uint16_t TIM_OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint16_t TIM_OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ +} TIM_OCInitTypeDef; + +/** + * @brief TIM Input Capture Init structure definition + */ + +typedef struct +{ + + uint16_t TIM_Channel; /*!< Specifies the TIM channel. + This parameter can be a value of @ref TIM_Channel */ + + uint16_t TIM_ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint16_t TIM_ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint16_t TIM_ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint16_t TIM_ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between 0x0 and 0xF */ +} TIM_ICInitTypeDef; + +/** + * @brief BDTR structure definition + * @note This structure is used only with TIM1 and TIM8. + */ + +typedef struct +{ + + uint16_t TIM_OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref OSSR_Off_State_Selection_for_Run_mode_state */ + + uint16_t TIM_OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint16_t TIM_LOCKLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref Lock_level */ + + uint16_t TIM_DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between 0x00 and 0xFF */ + + uint16_t TIM_Break; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref Break_Input_enable_disable */ + + uint16_t TIM_BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref Break_Polarity */ + + uint16_t TIM_AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ +} TIM_BDTRInitTypeDef; + +/** @defgroup TIM_Exported_constants + * @{ + */ + +#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM10)|| \ + ((PERIPH) == TIM11)|| \ + ((PERIPH) == TIM12)|| \ + ((PERIPH) == TIM13)|| \ + ((PERIPH) == TIM14)|| \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST1: TIM 1 and 8 */ +#define IS_TIM_LIST1_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM8)) + +/* LIST2: TIM 1, 8, 15 16 and 17 */ +#define IS_TIM_LIST2_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST3: TIM 1, 2, 3, 4, 5 and 8 */ +#define IS_TIM_LIST3_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8)) + +/* LIST4: TIM 1, 2, 3, 4, 5, 8, 15, 16 and 17 */ +#define IS_TIM_LIST4_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST5: TIM 1, 2, 3, 4, 5, 8 and 15 */ +#define IS_TIM_LIST5_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM15)) + +/* LIST6: TIM 1, 2, 3, 4, 5, 8, 9, 12 and 15 */ +#define IS_TIM_LIST6_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM12)|| \ + ((PERIPH) == TIM15)) + +/* LIST7: TIM 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 and 15 */ +#define IS_TIM_LIST7_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM12)|| \ + ((PERIPH) == TIM15)) + +/* LIST8: TIM 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13, 14, 15, 16 and 17 */ +#define IS_TIM_LIST8_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM10)|| \ + ((PERIPH) == TIM11)|| \ + ((PERIPH) == TIM12)|| \ + ((PERIPH) == TIM13)|| \ + ((PERIPH) == TIM14)|| \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST9: TIM 1, 2, 3, 4, 5, 6, 7, 8, 15, 16, and 17 */ +#define IS_TIM_LIST9_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes + * @{ + */ + +#define TIM_OCMode_Timing ((uint16_t)0x0000) +#define TIM_OCMode_Active ((uint16_t)0x0010) +#define TIM_OCMode_Inactive ((uint16_t)0x0020) +#define TIM_OCMode_Toggle ((uint16_t)0x0030) +#define TIM_OCMode_PWM1 ((uint16_t)0x0060) +#define TIM_OCMode_PWM2 ((uint16_t)0x0070) +#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \ + ((MODE) == TIM_OCMode_Active) || \ + ((MODE) == TIM_OCMode_Inactive) || \ + ((MODE) == TIM_OCMode_Toggle)|| \ + ((MODE) == TIM_OCMode_PWM1) || \ + ((MODE) == TIM_OCMode_PWM2)) +#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \ + ((MODE) == TIM_OCMode_Active) || \ + ((MODE) == TIM_OCMode_Inactive) || \ + ((MODE) == TIM_OCMode_Toggle)|| \ + ((MODE) == TIM_OCMode_PWM1) || \ + ((MODE) == TIM_OCMode_PWM2) || \ + ((MODE) == TIM_ForcedAction_Active) || \ + ((MODE) == TIM_ForcedAction_InActive)) +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode + * @{ + */ + +#define TIM_OPMode_Single ((uint16_t)0x0008) +#define TIM_OPMode_Repetitive ((uint16_t)0x0000) +#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \ + ((MODE) == TIM_OPMode_Repetitive)) +/** + * @} + */ + +/** @defgroup TIM_Channel + * @{ + */ + +#define TIM_Channel_1 ((uint16_t)0x0000) +#define TIM_Channel_2 ((uint16_t)0x0004) +#define TIM_Channel_3 ((uint16_t)0x0008) +#define TIM_Channel_4 ((uint16_t)0x000C) +#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2) || \ + ((CHANNEL) == TIM_Channel_3) || \ + ((CHANNEL) == TIM_Channel_4)) +#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2)) +#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2) || \ + ((CHANNEL) == TIM_Channel_3)) +/** + * @} + */ + +/** @defgroup TIM_Clock_Division_CKD + * @{ + */ + +#define TIM_CKD_DIV1 ((uint16_t)0x0000) +#define TIM_CKD_DIV2 ((uint16_t)0x0100) +#define TIM_CKD_DIV4 ((uint16_t)0x0200) +#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \ + ((DIV) == TIM_CKD_DIV2) || \ + ((DIV) == TIM_CKD_DIV4)) +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode + * @{ + */ + +#define TIM_CounterMode_Up ((uint16_t)0x0000) +#define TIM_CounterMode_Down ((uint16_t)0x0010) +#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020) +#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040) +#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060) +#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \ + ((MODE) == TIM_CounterMode_Down) || \ + ((MODE) == TIM_CounterMode_CenterAligned1) || \ + ((MODE) == TIM_CounterMode_CenterAligned2) || \ + ((MODE) == TIM_CounterMode_CenterAligned3)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity + * @{ + */ + +#define TIM_OCPolarity_High ((uint16_t)0x0000) +#define TIM_OCPolarity_Low ((uint16_t)0x0002) +#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \ + ((POLARITY) == TIM_OCPolarity_Low)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity + * @{ + */ + +#define TIM_OCNPolarity_High ((uint16_t)0x0000) +#define TIM_OCNPolarity_Low ((uint16_t)0x0008) +#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \ + ((POLARITY) == TIM_OCNPolarity_Low)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_state + * @{ + */ + +#define TIM_OutputState_Disable ((uint16_t)0x0000) +#define TIM_OutputState_Enable ((uint16_t)0x0001) +#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \ + ((STATE) == TIM_OutputState_Enable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_state + * @{ + */ + +#define TIM_OutputNState_Disable ((uint16_t)0x0000) +#define TIM_OutputNState_Enable ((uint16_t)0x0004) +#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \ + ((STATE) == TIM_OutputNState_Enable)) +/** + * @} + */ + +/** @defgroup TIM_Capture_Compare_state + * @{ + */ + +#define TIM_CCx_Enable ((uint16_t)0x0001) +#define TIM_CCx_Disable ((uint16_t)0x0000) +#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \ + ((CCX) == TIM_CCx_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Capture_Compare_N_state + * @{ + */ + +#define TIM_CCxN_Enable ((uint16_t)0x0004) +#define TIM_CCxN_Disable ((uint16_t)0x0000) +#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \ + ((CCXN) == TIM_CCxN_Disable)) +/** + * @} + */ + +/** @defgroup Break_Input_enable_disable + * @{ + */ + +#define TIM_Break_Enable ((uint16_t)0x1000) +#define TIM_Break_Disable ((uint16_t)0x0000) +#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \ + ((STATE) == TIM_Break_Disable)) +/** + * @} + */ + +/** @defgroup Break_Polarity + * @{ + */ + +#define TIM_BreakPolarity_Low ((uint16_t)0x0000) +#define TIM_BreakPolarity_High ((uint16_t)0x2000) +#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \ + ((POLARITY) == TIM_BreakPolarity_High)) +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset + * @{ + */ + +#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000) +#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000) +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \ + ((STATE) == TIM_AutomaticOutput_Disable)) +/** + * @} + */ + +/** @defgroup Lock_level + * @{ + */ + +#define TIM_LOCKLevel_OFF ((uint16_t)0x0000) +#define TIM_LOCKLevel_1 ((uint16_t)0x0100) +#define TIM_LOCKLevel_2 ((uint16_t)0x0200) +#define TIM_LOCKLevel_3 ((uint16_t)0x0300) +#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \ + ((LEVEL) == TIM_LOCKLevel_1) || \ + ((LEVEL) == TIM_LOCKLevel_2) || \ + ((LEVEL) == TIM_LOCKLevel_3)) +/** + * @} + */ + +/** @defgroup OSSI_Off_State_Selection_for_Idle_mode_state + * @{ + */ + +#define TIM_OSSIState_Enable ((uint16_t)0x0400) +#define TIM_OSSIState_Disable ((uint16_t)0x0000) +#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \ + ((STATE) == TIM_OSSIState_Disable)) +/** + * @} + */ + +/** @defgroup OSSR_Off_State_Selection_for_Run_mode_state + * @{ + */ + +#define TIM_OSSRState_Enable ((uint16_t)0x0800) +#define TIM_OSSRState_Disable ((uint16_t)0x0000) +#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \ + ((STATE) == TIM_OSSRState_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State + * @{ + */ + +#define TIM_OCIdleState_Set ((uint16_t)0x0100) +#define TIM_OCIdleState_Reset ((uint16_t)0x0000) +#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \ + ((STATE) == TIM_OCIdleState_Reset)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State + * @{ + */ + +#define TIM_OCNIdleState_Set ((uint16_t)0x0200) +#define TIM_OCNIdleState_Reset ((uint16_t)0x0000) +#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \ + ((STATE) == TIM_OCNIdleState_Reset)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity + * @{ + */ + +#define TIM_ICPolarity_Rising ((uint16_t)0x0000) +#define TIM_ICPolarity_Falling ((uint16_t)0x0002) +#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A) +#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ + ((POLARITY) == TIM_ICPolarity_Falling)) +#define IS_TIM_IC_POLARITY_LITE(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ + ((POLARITY) == TIM_ICPolarity_Falling)|| \ + ((POLARITY) == TIM_ICPolarity_BothEdge)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection + * @{ + */ + +#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC2, IC1, IC4 or IC3, respectively. */ +#define TIM_ICSelection_TRC ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */ +#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \ + ((SELECTION) == TIM_ICSelection_IndirectTI) || \ + ((SELECTION) == TIM_ICSelection_TRC)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler + * @{ + */ + +#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */ +#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */ +#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */ +#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */ +#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ + ((PRESCALER) == TIM_ICPSC_DIV2) || \ + ((PRESCALER) == TIM_ICPSC_DIV4) || \ + ((PRESCALER) == TIM_ICPSC_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_interrupt_sources + * @{ + */ + +#define TIM_IT_Update ((uint16_t)0x0001) +#define TIM_IT_CC1 ((uint16_t)0x0002) +#define TIM_IT_CC2 ((uint16_t)0x0004) +#define TIM_IT_CC3 ((uint16_t)0x0008) +#define TIM_IT_CC4 ((uint16_t)0x0010) +#define TIM_IT_COM ((uint16_t)0x0020) +#define TIM_IT_Trigger ((uint16_t)0x0040) +#define TIM_IT_Break ((uint16_t)0x0080) +#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000)) + +#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \ + ((IT) == TIM_IT_CC1) || \ + ((IT) == TIM_IT_CC2) || \ + ((IT) == TIM_IT_CC3) || \ + ((IT) == TIM_IT_CC4) || \ + ((IT) == TIM_IT_COM) || \ + ((IT) == TIM_IT_Trigger) || \ + ((IT) == TIM_IT_Break)) +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address + * @{ + */ + +#define TIM_DMABase_CR1 ((uint16_t)0x0000) +#define TIM_DMABase_CR2 ((uint16_t)0x0001) +#define TIM_DMABase_SMCR ((uint16_t)0x0002) +#define TIM_DMABase_DIER ((uint16_t)0x0003) +#define TIM_DMABase_SR ((uint16_t)0x0004) +#define TIM_DMABase_EGR ((uint16_t)0x0005) +#define TIM_DMABase_CCMR1 ((uint16_t)0x0006) +#define TIM_DMABase_CCMR2 ((uint16_t)0x0007) +#define TIM_DMABase_CCER ((uint16_t)0x0008) +#define TIM_DMABase_CNT ((uint16_t)0x0009) +#define TIM_DMABase_PSC ((uint16_t)0x000A) +#define TIM_DMABase_ARR ((uint16_t)0x000B) +#define TIM_DMABase_RCR ((uint16_t)0x000C) +#define TIM_DMABase_CCR1 ((uint16_t)0x000D) +#define TIM_DMABase_CCR2 ((uint16_t)0x000E) +#define TIM_DMABase_CCR3 ((uint16_t)0x000F) +#define TIM_DMABase_CCR4 ((uint16_t)0x0010) +#define TIM_DMABase_BDTR ((uint16_t)0x0011) +#define TIM_DMABase_DCR ((uint16_t)0x0012) +#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \ + ((BASE) == TIM_DMABase_CR2) || \ + ((BASE) == TIM_DMABase_SMCR) || \ + ((BASE) == TIM_DMABase_DIER) || \ + ((BASE) == TIM_DMABase_SR) || \ + ((BASE) == TIM_DMABase_EGR) || \ + ((BASE) == TIM_DMABase_CCMR1) || \ + ((BASE) == TIM_DMABase_CCMR2) || \ + ((BASE) == TIM_DMABase_CCER) || \ + ((BASE) == TIM_DMABase_CNT) || \ + ((BASE) == TIM_DMABase_PSC) || \ + ((BASE) == TIM_DMABase_ARR) || \ + ((BASE) == TIM_DMABase_RCR) || \ + ((BASE) == TIM_DMABase_CCR1) || \ + ((BASE) == TIM_DMABase_CCR2) || \ + ((BASE) == TIM_DMABase_CCR3) || \ + ((BASE) == TIM_DMABase_CCR4) || \ + ((BASE) == TIM_DMABase_BDTR) || \ + ((BASE) == TIM_DMABase_DCR)) +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length + * @{ + */ + +#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000) +#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100) +#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200) +#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300) +#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400) +#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500) +#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600) +#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700) +#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800) +#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900) +#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00) +#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00) +#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00) +#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00) +#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00) +#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00) +#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000) +#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100) +#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \ + ((LENGTH) == TIM_DMABurstLength_2Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_3Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_4Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_5Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_6Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_7Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_8Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_9Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_10Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_11Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_12Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_13Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_14Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_15Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_16Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_17Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_18Transfers)) +/** + * @} + */ + +/** @defgroup TIM_DMA_sources + * @{ + */ + +#define TIM_DMA_Update ((uint16_t)0x0100) +#define TIM_DMA_CC1 ((uint16_t)0x0200) +#define TIM_DMA_CC2 ((uint16_t)0x0400) +#define TIM_DMA_CC3 ((uint16_t)0x0800) +#define TIM_DMA_CC4 ((uint16_t)0x1000) +#define TIM_DMA_COM ((uint16_t)0x2000) +#define TIM_DMA_Trigger ((uint16_t)0x4000) +#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000)) + +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Prescaler + * @{ + */ + +#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000) +#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000) +#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000) +#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000) +#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_Internal_Trigger_Selection + * @{ + */ + +#define TIM_TS_ITR0 ((uint16_t)0x0000) +#define TIM_TS_ITR1 ((uint16_t)0x0010) +#define TIM_TS_ITR2 ((uint16_t)0x0020) +#define TIM_TS_ITR3 ((uint16_t)0x0030) +#define TIM_TS_TI1F_ED ((uint16_t)0x0040) +#define TIM_TS_TI1FP1 ((uint16_t)0x0050) +#define TIM_TS_TI2FP2 ((uint16_t)0x0060) +#define TIM_TS_ETRF ((uint16_t)0x0070) +#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3) || \ + ((SELECTION) == TIM_TS_TI1F_ED) || \ + ((SELECTION) == TIM_TS_TI1FP1) || \ + ((SELECTION) == TIM_TS_TI2FP2) || \ + ((SELECTION) == TIM_TS_ETRF)) +#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3)) +/** + * @} + */ + +/** @defgroup TIM_TIx_External_Clock_Source + * @{ + */ + +#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050) +#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060) +#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040) +#define IS_TIM_TIXCLK_SOURCE(SOURCE) (((SOURCE) == TIM_TIxExternalCLK1Source_TI1) || \ + ((SOURCE) == TIM_TIxExternalCLK1Source_TI2) || \ + ((SOURCE) == TIM_TIxExternalCLK1Source_TI1ED)) +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Polarity + * @{ + */ +#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000) +#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000) +#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \ + ((POLARITY) == TIM_ExtTRGPolarity_NonInverted)) +/** + * @} + */ + +/** @defgroup TIM_Prescaler_Reload_Mode + * @{ + */ + +#define TIM_PSCReloadMode_Update ((uint16_t)0x0000) +#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001) +#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \ + ((RELOAD) == TIM_PSCReloadMode_Immediate)) +/** + * @} + */ + +/** @defgroup TIM_Forced_Action + * @{ + */ + +#define TIM_ForcedAction_Active ((uint16_t)0x0050) +#define TIM_ForcedAction_InActive ((uint16_t)0x0040) +#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \ + ((ACTION) == TIM_ForcedAction_InActive)) +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode + * @{ + */ + +#define TIM_EncoderMode_TI1 ((uint16_t)0x0001) +#define TIM_EncoderMode_TI2 ((uint16_t)0x0002) +#define TIM_EncoderMode_TI12 ((uint16_t)0x0003) +#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \ + ((MODE) == TIM_EncoderMode_TI2) || \ + ((MODE) == TIM_EncoderMode_TI12)) +/** + * @} + */ + + +/** @defgroup TIM_Event_Source + * @{ + */ + +#define TIM_EventSource_Update ((uint16_t)0x0001) +#define TIM_EventSource_CC1 ((uint16_t)0x0002) +#define TIM_EventSource_CC2 ((uint16_t)0x0004) +#define TIM_EventSource_CC3 ((uint16_t)0x0008) +#define TIM_EventSource_CC4 ((uint16_t)0x0010) +#define TIM_EventSource_COM ((uint16_t)0x0020) +#define TIM_EventSource_Trigger ((uint16_t)0x0040) +#define TIM_EventSource_Break ((uint16_t)0x0080) +#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000)) + +/** + * @} + */ + +/** @defgroup TIM_Update_Source + * @{ + */ + +#define TIM_UpdateSource_Global ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow + or the setting of UG bit, or an update generation + through the slave mode controller. */ +#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */ +#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \ + ((SOURCE) == TIM_UpdateSource_Regular)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Preload_State + * @{ + */ + +#define TIM_OCPreload_Enable ((uint16_t)0x0008) +#define TIM_OCPreload_Disable ((uint16_t)0x0000) +#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \ + ((STATE) == TIM_OCPreload_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Fast_State + * @{ + */ + +#define TIM_OCFast_Enable ((uint16_t)0x0004) +#define TIM_OCFast_Disable ((uint16_t)0x0000) +#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \ + ((STATE) == TIM_OCFast_Disable)) + +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Clear_State + * @{ + */ + +#define TIM_OCClear_Enable ((uint16_t)0x0080) +#define TIM_OCClear_Disable ((uint16_t)0x0000) +#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \ + ((STATE) == TIM_OCClear_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Trigger_Output_Source + * @{ + */ + +#define TIM_TRGOSource_Reset ((uint16_t)0x0000) +#define TIM_TRGOSource_Enable ((uint16_t)0x0010) +#define TIM_TRGOSource_Update ((uint16_t)0x0020) +#define TIM_TRGOSource_OC1 ((uint16_t)0x0030) +#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040) +#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050) +#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060) +#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070) +#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \ + ((SOURCE) == TIM_TRGOSource_Enable) || \ + ((SOURCE) == TIM_TRGOSource_Update) || \ + ((SOURCE) == TIM_TRGOSource_OC1) || \ + ((SOURCE) == TIM_TRGOSource_OC1Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC2Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC3Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC4Ref)) +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode + * @{ + */ + +#define TIM_SlaveMode_Reset ((uint16_t)0x0004) +#define TIM_SlaveMode_Gated ((uint16_t)0x0005) +#define TIM_SlaveMode_Trigger ((uint16_t)0x0006) +#define TIM_SlaveMode_External1 ((uint16_t)0x0007) +#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \ + ((MODE) == TIM_SlaveMode_Gated) || \ + ((MODE) == TIM_SlaveMode_Trigger) || \ + ((MODE) == TIM_SlaveMode_External1)) +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode + * @{ + */ + +#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080) +#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000) +#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \ + ((STATE) == TIM_MasterSlaveMode_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Flags + * @{ + */ + +#define TIM_FLAG_Update ((uint16_t)0x0001) +#define TIM_FLAG_CC1 ((uint16_t)0x0002) +#define TIM_FLAG_CC2 ((uint16_t)0x0004) +#define TIM_FLAG_CC3 ((uint16_t)0x0008) +#define TIM_FLAG_CC4 ((uint16_t)0x0010) +#define TIM_FLAG_COM ((uint16_t)0x0020) +#define TIM_FLAG_Trigger ((uint16_t)0x0040) +#define TIM_FLAG_Break ((uint16_t)0x0080) +#define TIM_FLAG_CC1OF ((uint16_t)0x0200) +#define TIM_FLAG_CC2OF ((uint16_t)0x0400) +#define TIM_FLAG_CC3OF ((uint16_t)0x0800) +#define TIM_FLAG_CC4OF ((uint16_t)0x1000) +#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \ + ((FLAG) == TIM_FLAG_CC1) || \ + ((FLAG) == TIM_FLAG_CC2) || \ + ((FLAG) == TIM_FLAG_CC3) || \ + ((FLAG) == TIM_FLAG_CC4) || \ + ((FLAG) == TIM_FLAG_COM) || \ + ((FLAG) == TIM_FLAG_Trigger) || \ + ((FLAG) == TIM_FLAG_Break) || \ + ((FLAG) == TIM_FLAG_CC1OF) || \ + ((FLAG) == TIM_FLAG_CC2OF) || \ + ((FLAG) == TIM_FLAG_CC3OF) || \ + ((FLAG) == TIM_FLAG_CC4OF)) + + +#define IS_TIM_CLEAR_FLAG(TIM_FLAG) ((((TIM_FLAG) & (uint16_t)0xE100) == 0x0000) && ((TIM_FLAG) != 0x0000)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Filer_Value + * @{ + */ + +#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Filter + * @{ + */ + +#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup TIM_Legacy + * @{ + */ + +#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer +#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers +#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers +#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers +#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers +#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers +#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers +#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers +#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers +#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers +#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers +#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers +#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers +#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers +#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers +#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers +#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers +#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions + * @{ + */ + +void TIM_DeInit(TIM_TypeDef* TIMx); +void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); +void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct); +void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); +void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct); +void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState); +void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource); +void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength); +void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState); +void TIM_InternalClockConfig(TIM_TypeDef* TIMx); +void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); +void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, + uint16_t TIM_ICPolarity, uint16_t ICFilter); +void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); +void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter); +void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); +void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode); +void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode); +void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); +void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, + uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity); +void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx); +void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN); +void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode); +void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource); +void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode); +void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource); +void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); +void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode); +void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter); +void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload); +void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1); +void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2); +void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3); +void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4); +void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD); +uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx); +uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx); +uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx); +uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx); +uint16_t TIM_GetCounter(TIM_TypeDef* TIMx); +uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx); +FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); +void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); +ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT); +void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_TIM_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_usart.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_usart.h new file mode 100644 index 0000000..162fa87 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_usart.h @@ -0,0 +1,412 @@ +/** + ****************************************************************************** + * @file stm32f10x_usart.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the USART + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_USART_H +#define __STM32F10x_USART_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/** @defgroup USART_Exported_Types + * @{ + */ + +/** + * @brief USART Init Structure definition + */ + +typedef struct +{ + uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate))) + - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */ + + uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_Word_Length */ + + uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits */ + + uint16_t USART_Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode */ + + uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref USART_Hardware_Flow_Control */ +} USART_InitTypeDef; + +/** + * @brief USART Clock Init Structure definition + */ + +typedef struct +{ + + uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_Clock */ + + uint16_t USART_CPOL; /*!< Specifies the steady state value of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity */ + + uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase */ + + uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit */ +} USART_ClockInitTypeDef; + +/** + * @} + */ + +/** @defgroup USART_Exported_Constants + * @{ + */ + +#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == UART4) || \ + ((PERIPH) == UART5)) + +#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3)) + +#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == UART4)) +/** @defgroup USART_Word_Length + * @{ + */ + +#define USART_WordLength_8b ((uint16_t)0x0000) +#define USART_WordLength_9b ((uint16_t)0x1000) + +#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ + ((LENGTH) == USART_WordLength_9b)) +/** + * @} + */ + +/** @defgroup USART_Stop_Bits + * @{ + */ + +#define USART_StopBits_1 ((uint16_t)0x0000) +#define USART_StopBits_0_5 ((uint16_t)0x1000) +#define USART_StopBits_2 ((uint16_t)0x2000) +#define USART_StopBits_1_5 ((uint16_t)0x3000) +#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ + ((STOPBITS) == USART_StopBits_0_5) || \ + ((STOPBITS) == USART_StopBits_2) || \ + ((STOPBITS) == USART_StopBits_1_5)) +/** + * @} + */ + +/** @defgroup USART_Parity + * @{ + */ + +#define USART_Parity_No ((uint16_t)0x0000) +#define USART_Parity_Even ((uint16_t)0x0400) +#define USART_Parity_Odd ((uint16_t)0x0600) +#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ + ((PARITY) == USART_Parity_Even) || \ + ((PARITY) == USART_Parity_Odd)) +/** + * @} + */ + +/** @defgroup USART_Mode + * @{ + */ + +#define USART_Mode_Rx ((uint16_t)0x0004) +#define USART_Mode_Tx ((uint16_t)0x0008) +#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00)) +/** + * @} + */ + +/** @defgroup USART_Hardware_Flow_Control + * @{ + */ +#define USART_HardwareFlowControl_None ((uint16_t)0x0000) +#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100) +#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200) +#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300) +#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ + (((CONTROL) == USART_HardwareFlowControl_None) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS) || \ + ((CONTROL) == USART_HardwareFlowControl_CTS) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) +/** + * @} + */ + +/** @defgroup USART_Clock + * @{ + */ +#define USART_Clock_Disable ((uint16_t)0x0000) +#define USART_Clock_Enable ((uint16_t)0x0800) +#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ + ((CLOCK) == USART_Clock_Enable)) +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity + * @{ + */ + +#define USART_CPOL_Low ((uint16_t)0x0000) +#define USART_CPOL_High ((uint16_t)0x0400) +#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) + +/** + * @} + */ + +/** @defgroup USART_Clock_Phase + * @{ + */ + +#define USART_CPHA_1Edge ((uint16_t)0x0000) +#define USART_CPHA_2Edge ((uint16_t)0x0200) +#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) + +/** + * @} + */ + +/** @defgroup USART_Last_Bit + * @{ + */ + +#define USART_LastBit_Disable ((uint16_t)0x0000) +#define USART_LastBit_Enable ((uint16_t)0x0100) +#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ + ((LASTBIT) == USART_LastBit_Enable)) +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition + * @{ + */ + +#define USART_IT_PE ((uint16_t)0x0028) +#define USART_IT_TXE ((uint16_t)0x0727) +#define USART_IT_TC ((uint16_t)0x0626) +#define USART_IT_RXNE ((uint16_t)0x0525) +#define USART_IT_IDLE ((uint16_t)0x0424) +#define USART_IT_LBD ((uint16_t)0x0846) +#define USART_IT_CTS ((uint16_t)0x096A) +#define USART_IT_ERR ((uint16_t)0x0060) +#define USART_IT_ORE ((uint16_t)0x0360) +#define USART_IT_NE ((uint16_t)0x0260) +#define USART_IT_FE ((uint16_t)0x0160) +#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR)) +#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ + ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE)) +#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS)) +/** + * @} + */ + +/** @defgroup USART_DMA_Requests + * @{ + */ + +#define USART_DMAReq_Tx ((uint16_t)0x0080) +#define USART_DMAReq_Rx ((uint16_t)0x0040) +#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00)) + +/** + * @} + */ + +/** @defgroup USART_WakeUp_methods + * @{ + */ + +#define USART_WakeUp_IdleLine ((uint16_t)0x0000) +#define USART_WakeUp_AddressMark ((uint16_t)0x0800) +#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ + ((WAKEUP) == USART_WakeUp_AddressMark)) +/** + * @} + */ + +/** @defgroup USART_LIN_Break_Detection_Length + * @{ + */ + +#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000) +#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020) +#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ + (((LENGTH) == USART_LINBreakDetectLength_10b) || \ + ((LENGTH) == USART_LINBreakDetectLength_11b)) +/** + * @} + */ + +/** @defgroup USART_IrDA_Low_Power + * @{ + */ + +#define USART_IrDAMode_LowPower ((uint16_t)0x0004) +#define USART_IrDAMode_Normal ((uint16_t)0x0000) +#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ + ((MODE) == USART_IrDAMode_Normal)) +/** + * @} + */ + +/** @defgroup USART_Flags + * @{ + */ + +#define USART_FLAG_CTS ((uint16_t)0x0200) +#define USART_FLAG_LBD ((uint16_t)0x0100) +#define USART_FLAG_TXE ((uint16_t)0x0080) +#define USART_FLAG_TC ((uint16_t)0x0040) +#define USART_FLAG_RXNE ((uint16_t)0x0020) +#define USART_FLAG_IDLE ((uint16_t)0x0010) +#define USART_FLAG_ORE ((uint16_t)0x0008) +#define USART_FLAG_NE ((uint16_t)0x0004) +#define USART_FLAG_FE ((uint16_t)0x0002) +#define USART_FLAG_PE ((uint16_t)0x0001) +#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ + ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ + ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ + ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ + ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE)) + +#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00)) +#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(uint32_t*)&(PERIPH)) != UART4_BASE) &&\ + ((*(uint32_t*)&(PERIPH)) != UART5_BASE)) \ + || ((USART_FLAG) != USART_FLAG_CTS)) +#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21)) +#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) +#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup USART_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions + * @{ + */ + +void USART_DeInit(USART_TypeDef* USARTx); +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); +void USART_StructInit(USART_InitTypeDef* USART_InitStruct); +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState); +void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState); +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address); +void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp); +void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength); +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data); +uint16_t USART_ReceiveData(USART_TypeDef* USARTx); +void USART_SendBreak(USART_TypeDef* USARTx); +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode); +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG); +void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG); +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT); +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_USART_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_wwdg.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_wwdg.h new file mode 100644 index 0000000..bdfa177 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/inc/stm32f10x_wwdg.h @@ -0,0 +1,115 @@ +/** + ****************************************************************************** + * @file stm32f10x_wwdg.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the WWDG firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_WWDG_H +#define __STM32F10x_WWDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup WWDG + * @{ + */ + +/** @defgroup WWDG_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Exported_Constants + * @{ + */ + +/** @defgroup WWDG_Prescaler + * @{ + */ + +#define WWDG_Prescaler_1 ((uint32_t)0x00000000) +#define WWDG_Prescaler_2 ((uint32_t)0x00000080) +#define WWDG_Prescaler_4 ((uint32_t)0x00000100) +#define WWDG_Prescaler_8 ((uint32_t)0x00000180) +#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \ + ((PRESCALER) == WWDG_Prescaler_2) || \ + ((PRESCALER) == WWDG_Prescaler_4) || \ + ((PRESCALER) == WWDG_Prescaler_8)) +#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F) +#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup WWDG_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup WWDG_Exported_Functions + * @{ + */ + +void WWDG_DeInit(void); +void WWDG_SetPrescaler(uint32_t WWDG_Prescaler); +void WWDG_SetWindowValue(uint8_t WindowValue); +void WWDG_EnableIT(void); +void WWDG_SetCounter(uint8_t Counter); +void WWDG_Enable(uint8_t Counter); +FlagStatus WWDG_GetFlagStatus(void); +void WWDG_ClearFlag(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_WWDG_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/misc.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/misc.c new file mode 100644 index 0000000..c0a5e11 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/misc.c @@ -0,0 +1,225 @@ +/** + ****************************************************************************** + * @file misc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the miscellaneous firmware functions (add-on + * to CMSIS functions). + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "misc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup MISC + * @brief MISC driver modules + * @{ + */ + +/** @defgroup MISC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Defines + * @{ + */ + +#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000) +/** + * @} + */ + +/** @defgroup MISC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Functions + * @{ + */ + +/** + * @brief Configures the priority grouping: pre-emption priority and subpriority. + * @param NVIC_PriorityGroup: specifies the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority + * 4 bits for subpriority + * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority + * 3 bits for subpriority + * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority + * 2 bits for subpriority + * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority + * 1 bits for subpriority + * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority + * 0 bits for subpriority + * @retval None + */ +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */ + SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup; +} + +/** + * @brief Initializes the NVIC peripheral according to the specified + * parameters in the NVIC_InitStruct. + * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains + * the configuration information for the specified NVIC peripheral. + * @retval None + */ +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) +{ + uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F; + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); + assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority)); + + if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) + { + /* Compute the Corresponding IRQ Priority --------------------------------*/ + tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08; + tmppre = (0x4 - tmppriority); + tmpsub = tmpsub >> tmppriority; + + tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre; + tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub; + tmppriority = tmppriority << 0x04; + + NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority; + + /* Enable the Selected IRQ Channels --------------------------------------*/ + NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = + (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } + else + { + /* Disable the Selected IRQ Channels -------------------------------------*/ + NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = + (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } +} + +/** + * @brief Sets the vector table location and Offset. + * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory. + * This parameter can be one of the following values: + * @arg NVIC_VectTab_RAM + * @arg NVIC_VectTab_FLASH + * @param Offset: Vector Table base offset field. This value must be a multiple + * of 0x200. + * @retval None + */ +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset) +{ + /* Check the parameters */ + assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); + assert_param(IS_NVIC_OFFSET(Offset)); + + SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80); +} + +/** + * @brief Selects the condition for the system to enter low power mode. + * @param LowPowerMode: Specifies the new mode for the system to enter low power mode. + * This parameter can be one of the following values: + * @arg NVIC_LP_SEVONPEND + * @arg NVIC_LP_SLEEPDEEP + * @arg NVIC_LP_SLEEPONEXIT + * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_NVIC_LP(LowPowerMode)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + SCB->SCR |= LowPowerMode; + } + else + { + SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode); + } +} + +/** + * @brief Configures the SysTick clock source. + * @param SysTick_CLKSource: specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); + if (SysTick_CLKSource == SysTick_CLKSource_HCLK) + { + SysTick->CTRL |= SysTick_CLKSource_HCLK; + } + else + { + SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_adc.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_adc.c new file mode 100644 index 0000000..8155dc9 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_adc.c @@ -0,0 +1,1307 @@ +/** + ****************************************************************************** + * @file stm32f10x_adc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the ADC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_adc.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup ADC + * @brief ADC driver modules + * @{ + */ + +/** @defgroup ADC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Defines + * @{ + */ + +/* ADC DISCNUM mask */ +#define CR1_DISCNUM_Reset ((uint32_t)0xFFFF1FFF) + +/* ADC DISCEN mask */ +#define CR1_DISCEN_Set ((uint32_t)0x00000800) +#define CR1_DISCEN_Reset ((uint32_t)0xFFFFF7FF) + +/* ADC JAUTO mask */ +#define CR1_JAUTO_Set ((uint32_t)0x00000400) +#define CR1_JAUTO_Reset ((uint32_t)0xFFFFFBFF) + +/* ADC JDISCEN mask */ +#define CR1_JDISCEN_Set ((uint32_t)0x00001000) +#define CR1_JDISCEN_Reset ((uint32_t)0xFFFFEFFF) + +/* ADC AWDCH mask */ +#define CR1_AWDCH_Reset ((uint32_t)0xFFFFFFE0) + +/* ADC Analog watchdog enable mode mask */ +#define CR1_AWDMode_Reset ((uint32_t)0xFF3FFDFF) + +/* CR1 register Mask */ +#define CR1_CLEAR_Mask ((uint32_t)0xFFF0FEFF) + +/* ADC ADON mask */ +#define CR2_ADON_Set ((uint32_t)0x00000001) +#define CR2_ADON_Reset ((uint32_t)0xFFFFFFFE) + +/* ADC DMA mask */ +#define CR2_DMA_Set ((uint32_t)0x00000100) +#define CR2_DMA_Reset ((uint32_t)0xFFFFFEFF) + +/* ADC RSTCAL mask */ +#define CR2_RSTCAL_Set ((uint32_t)0x00000008) + +/* ADC CAL mask */ +#define CR2_CAL_Set ((uint32_t)0x00000004) + +/* ADC SWSTART mask */ +#define CR2_SWSTART_Set ((uint32_t)0x00400000) + +/* ADC EXTTRIG mask */ +#define CR2_EXTTRIG_Set ((uint32_t)0x00100000) +#define CR2_EXTTRIG_Reset ((uint32_t)0xFFEFFFFF) + +/* ADC Software start mask */ +#define CR2_EXTTRIG_SWSTART_Set ((uint32_t)0x00500000) +#define CR2_EXTTRIG_SWSTART_Reset ((uint32_t)0xFFAFFFFF) + +/* ADC JEXTSEL mask */ +#define CR2_JEXTSEL_Reset ((uint32_t)0xFFFF8FFF) + +/* ADC JEXTTRIG mask */ +#define CR2_JEXTTRIG_Set ((uint32_t)0x00008000) +#define CR2_JEXTTRIG_Reset ((uint32_t)0xFFFF7FFF) + +/* ADC JSWSTART mask */ +#define CR2_JSWSTART_Set ((uint32_t)0x00200000) + +/* ADC injected software start mask */ +#define CR2_JEXTTRIG_JSWSTART_Set ((uint32_t)0x00208000) +#define CR2_JEXTTRIG_JSWSTART_Reset ((uint32_t)0xFFDF7FFF) + +/* ADC TSPD mask */ +#define CR2_TSVREFE_Set ((uint32_t)0x00800000) +#define CR2_TSVREFE_Reset ((uint32_t)0xFF7FFFFF) + +/* CR2 register Mask */ +#define CR2_CLEAR_Mask ((uint32_t)0xFFF1F7FD) + +/* ADC SQx mask */ +#define SQR3_SQ_Set ((uint32_t)0x0000001F) +#define SQR2_SQ_Set ((uint32_t)0x0000001F) +#define SQR1_SQ_Set ((uint32_t)0x0000001F) + +/* SQR1 register Mask */ +#define SQR1_CLEAR_Mask ((uint32_t)0xFF0FFFFF) + +/* ADC JSQx mask */ +#define JSQR_JSQ_Set ((uint32_t)0x0000001F) + +/* ADC JL mask */ +#define JSQR_JL_Set ((uint32_t)0x00300000) +#define JSQR_JL_Reset ((uint32_t)0xFFCFFFFF) + +/* ADC SMPx mask */ +#define SMPR1_SMP_Set ((uint32_t)0x00000007) +#define SMPR2_SMP_Set ((uint32_t)0x00000007) + +/* ADC JDRx registers offset */ +#define JDR_Offset ((uint8_t)0x28) + +/* ADC1 DR register base address */ +#define DR_ADDRESS ((uint32_t)0x4001244C) + +/** + * @} + */ + +/** @defgroup ADC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the ADCx peripheral registers to their default reset values. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_DeInit(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + if (ADCx == ADC1) + { + /* Enable ADC1 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE); + /* Release ADC1 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE); + } + else if (ADCx == ADC2) + { + /* Enable ADC2 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE); + /* Release ADC2 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE); + } + else + { + if (ADCx == ADC3) + { + /* Enable ADC3 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, ENABLE); + /* Release ADC3 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, DISABLE); + } + } +} + +/** + * @brief Initializes the ADCx peripheral according to the specified parameters + * in the ADC_InitStruct. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains + * the configuration information for the specified ADC peripheral. + * @retval None + */ +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct) +{ + uint32_t tmpreg1 = 0; + uint8_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_MODE(ADC_InitStruct->ADC_Mode)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); + assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv)); + assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); + assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel)); + + /*---------------------------- ADCx CR1 Configuration -----------------*/ + /* Get the ADCx CR1 value */ + tmpreg1 = ADCx->CR1; + /* Clear DUALMOD and SCAN bits */ + tmpreg1 &= CR1_CLEAR_Mask; + /* Configure ADCx: Dual mode and scan conversion mode */ + /* Set DUALMOD bits according to ADC_Mode value */ + /* Set SCAN bit according to ADC_ScanConvMode value */ + tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_Mode | ((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8)); + /* Write to ADCx CR1 */ + ADCx->CR1 = tmpreg1; + + /*---------------------------- ADCx CR2 Configuration -----------------*/ + /* Get the ADCx CR2 value */ + tmpreg1 = ADCx->CR2; + /* Clear CONT, ALIGN and EXTSEL bits */ + tmpreg1 &= CR2_CLEAR_Mask; + /* Configure ADCx: external trigger event and continuous conversion mode */ + /* Set ALIGN bit according to ADC_DataAlign value */ + /* Set EXTSEL bits according to ADC_ExternalTrigConv value */ + /* Set CONT bit according to ADC_ContinuousConvMode value */ + tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv | + ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1)); + /* Write to ADCx CR2 */ + ADCx->CR2 = tmpreg1; + + /*---------------------------- ADCx SQR1 Configuration -----------------*/ + /* Get the ADCx SQR1 value */ + tmpreg1 = ADCx->SQR1; + /* Clear L bits */ + tmpreg1 &= SQR1_CLEAR_Mask; + /* Configure ADCx: regular channel sequence length */ + /* Set L bits according to ADC_NbrOfChannel value */ + tmpreg2 |= (uint8_t) (ADC_InitStruct->ADC_NbrOfChannel - (uint8_t)1); + tmpreg1 |= (uint32_t)tmpreg2 << 20; + /* Write to ADCx SQR1 */ + ADCx->SQR1 = tmpreg1; +} + +/** + * @brief Fills each ADC_InitStruct member with its default value. + * @param ADC_InitStruct : pointer to an ADC_InitTypeDef structure which will be initialized. + * @retval None + */ +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct) +{ + /* Reset ADC init structure parameters values */ + /* Initialize the ADC_Mode member */ + ADC_InitStruct->ADC_Mode = ADC_Mode_Independent; + /* initialize the ADC_ScanConvMode member */ + ADC_InitStruct->ADC_ScanConvMode = DISABLE; + /* Initialize the ADC_ContinuousConvMode member */ + ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; + /* Initialize the ADC_ExternalTrigConv member */ + ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1; + /* Initialize the ADC_DataAlign member */ + ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; + /* Initialize the ADC_NbrOfChannel member */ + ADC_InitStruct->ADC_NbrOfChannel = 1; +} + +/** + * @brief Enables or disables the specified ADC peripheral. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the ADCx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the ADON bit to wake up the ADC from power down mode */ + ADCx->CR2 |= CR2_ADON_Set; + } + else + { + /* Disable the selected ADC peripheral */ + ADCx->CR2 &= CR2_ADON_Reset; + } +} + +/** + * @brief Enables or disables the specified ADC DMA request. + * @param ADCx: where x can be 1 or 3 to select the ADC peripheral. + * Note: ADC2 hasn't a DMA capability. + * @param NewState: new state of the selected ADC DMA transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_DMA_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC DMA request */ + ADCx->CR2 |= CR2_DMA_Set; + } + else + { + /* Disable the selected ADC DMA request */ + ADCx->CR2 &= CR2_DMA_Reset; + } +} + +/** + * @brief Enables or disables the specified ADC interrupts. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @param NewState: new state of the specified ADC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState) +{ + uint8_t itmask = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_ADC_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = (uint8_t)ADC_IT; + if (NewState != DISABLE) + { + /* Enable the selected ADC interrupts */ + ADCx->CR1 |= itmask; + } + else + { + /* Disable the selected ADC interrupts */ + ADCx->CR1 &= (~(uint32_t)itmask); + } +} + +/** + * @brief Resets the selected ADC calibration registers. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_ResetCalibration(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Resets the selected ADC calibration registers */ + ADCx->CR2 |= CR2_RSTCAL_Set; +} + +/** + * @brief Gets the selected ADC reset calibration registers status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC reset calibration registers (SET or RESET). + */ +FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of RSTCAL bit */ + if ((ADCx->CR2 & CR2_RSTCAL_Set) != (uint32_t)RESET) + { + /* RSTCAL bit is set */ + bitstatus = SET; + } + else + { + /* RSTCAL bit is reset */ + bitstatus = RESET; + } + /* Return the RSTCAL bit status */ + return bitstatus; +} + +/** + * @brief Starts the selected ADC calibration process. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_StartCalibration(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Enable the selected ADC calibration process */ + ADCx->CR2 |= CR2_CAL_Set; +} + +/** + * @brief Gets the selected ADC calibration status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC calibration (SET or RESET). + */ +FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of CAL bit */ + if ((ADCx->CR2 & CR2_CAL_Set) != (uint32_t)RESET) + { + /* CAL bit is set: calibration on going */ + bitstatus = SET; + } + else + { + /* CAL bit is reset: end of calibration */ + bitstatus = RESET; + } + /* Return the CAL bit status */ + return bitstatus; +} + +/** + * @brief Enables or disables the selected ADC software start conversion . + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC software start conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC conversion on external event and start the selected + ADC conversion */ + ADCx->CR2 |= CR2_EXTTRIG_SWSTART_Set; + } + else + { + /* Disable the selected ADC conversion on external event and stop the selected + ADC conversion */ + ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset; + } +} + +/** + * @brief Gets the selected ADC Software start conversion Status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC software start conversion (SET or RESET). + */ +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of SWSTART bit */ + if ((ADCx->CR2 & CR2_SWSTART_Set) != (uint32_t)RESET) + { + /* SWSTART bit is set */ + bitstatus = SET; + } + else + { + /* SWSTART bit is reset */ + bitstatus = RESET; + } + /* Return the SWSTART bit status */ + return bitstatus; +} + +/** + * @brief Configures the discontinuous mode for the selected ADC regular + * group channel. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param Number: specifies the discontinuous mode regular channel + * count value. This number must be between 1 and 8. + * @retval None + */ +void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number)); + /* Get the old register value */ + tmpreg1 = ADCx->CR1; + /* Clear the old discontinuous mode channel count */ + tmpreg1 &= CR1_DISCNUM_Reset; + /* Set the discontinuous mode channel count */ + tmpreg2 = Number - 1; + tmpreg1 |= tmpreg2 << 13; + /* Store the new register value */ + ADCx->CR1 = tmpreg1; +} + +/** + * @brief Enables or disables the discontinuous mode on regular group + * channel for the specified ADC + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC discontinuous mode + * on regular group channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC regular discontinuous mode */ + ADCx->CR1 |= CR1_DISCEN_Set; + } + else + { + /* Disable the selected ADC regular discontinuous mode */ + ADCx->CR1 &= CR1_DISCEN_Reset; + } +} + +/** + * @brief Configures for the selected ADC regular channel its corresponding + * rank in the sequencer and its sample time. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @param Rank: The rank in the regular group sequencer. This parameter must be between 1 to 16. + * @param ADC_SampleTime: The sample time value to be set for the selected channel. + * This parameter can be one of the following values: + * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles + * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles + * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles + * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles + * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles + * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles + * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles + * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles + * @retval None + */ +void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_REGULAR_RANK(Rank)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ + if (ADC_Channel > ADC_Channel_9) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR1; + /* Calculate the mask to clear */ + tmpreg2 = SMPR1_SMP_Set << (3 * (ADC_Channel - 10)); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10)); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR1 = tmpreg1; + } + else /* ADC_Channel include in ADC_Channel_[0..9] */ + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR2; + /* Calculate the mask to clear */ + tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR2 = tmpreg1; + } + /* For Rank 1 to 6 */ + if (Rank < 7) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR3; + /* Calculate the mask to clear */ + tmpreg2 = SQR3_SQ_Set << (5 * (Rank - 1)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR3 = tmpreg1; + } + /* For Rank 7 to 12 */ + else if (Rank < 13) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR2; + /* Calculate the mask to clear */ + tmpreg2 = SQR2_SQ_Set << (5 * (Rank - 7)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR2 = tmpreg1; + } + /* For Rank 13 to 16 */ + else + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR1; + /* Calculate the mask to clear */ + tmpreg2 = SQR1_SQ_Set << (5 * (Rank - 13)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR1 = tmpreg1; + } +} + +/** + * @brief Enables or disables the ADCx conversion through external trigger. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC external trigger start of conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC conversion on external event */ + ADCx->CR2 |= CR2_EXTTRIG_Set; + } + else + { + /* Disable the selected ADC conversion on external event */ + ADCx->CR2 &= CR2_EXTTRIG_Reset; + } +} + +/** + * @brief Returns the last ADCx conversion result data for regular channel. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The Data conversion value. + */ +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Return the selected ADC conversion value */ + return (uint16_t) ADCx->DR; +} + +/** + * @brief Returns the last ADC1 and ADC2 conversion result data in dual mode. + * @retval The Data conversion value. + */ +uint32_t ADC_GetDualModeConversionValue(void) +{ + /* Return the dual mode conversion value */ + return (*(__IO uint32_t *) DR_ADDRESS); +} + +/** + * @brief Enables or disables the selected ADC automatic injected group + * conversion after regular one. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC auto injected conversion + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC automatic injected group conversion */ + ADCx->CR1 |= CR1_JAUTO_Set; + } + else + { + /* Disable the selected ADC automatic injected group conversion */ + ADCx->CR1 &= CR1_JAUTO_Reset; + } +} + +/** + * @brief Enables or disables the discontinuous mode for injected group + * channel for the specified ADC + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC discontinuous mode + * on injected group channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC injected discontinuous mode */ + ADCx->CR1 |= CR1_JDISCEN_Set; + } + else + { + /* Disable the selected ADC injected discontinuous mode */ + ADCx->CR1 &= CR1_JDISCEN_Reset; + } +} + +/** + * @brief Configures the ADCx external trigger for injected channels conversion. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion. + * This parameter can be one of the following values: + * @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3) + * @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3) + * @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8 + * capture compare4 event selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not + * by external trigger (for ADC1, ADC2 and ADC3) + * @retval None + */ +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv)); + /* Get the old register value */ + tmpreg = ADCx->CR2; + /* Clear the old external event selection for injected group */ + tmpreg &= CR2_JEXTSEL_Reset; + /* Set the external event selection for injected group */ + tmpreg |= ADC_ExternalTrigInjecConv; + /* Store the new register value */ + ADCx->CR2 = tmpreg; +} + +/** + * @brief Enables or disables the ADCx injected channels conversion through + * external trigger + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC external trigger start of + * injected conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC external event selection for injected group */ + ADCx->CR2 |= CR2_JEXTTRIG_Set; + } + else + { + /* Disable the selected ADC external event selection for injected group */ + ADCx->CR2 &= CR2_JEXTTRIG_Reset; + } +} + +/** + * @brief Enables or disables the selected ADC start of the injected + * channels conversion. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC software start injected conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC conversion for injected group on external event and start the selected + ADC injected conversion */ + ADCx->CR2 |= CR2_JEXTTRIG_JSWSTART_Set; + } + else + { + /* Disable the selected ADC conversion on external event for injected group and stop the selected + ADC injected conversion */ + ADCx->CR2 &= CR2_JEXTTRIG_JSWSTART_Reset; + } +} + +/** + * @brief Gets the selected ADC Software start injected conversion Status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC software start injected conversion (SET or RESET). + */ +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of JSWSTART bit */ + if ((ADCx->CR2 & CR2_JSWSTART_Set) != (uint32_t)RESET) + { + /* JSWSTART bit is set */ + bitstatus = SET; + } + else + { + /* JSWSTART bit is reset */ + bitstatus = RESET; + } + /* Return the JSWSTART bit status */ + return bitstatus; +} + +/** + * @brief Configures for the selected ADC injected channel its corresponding + * rank in the sequencer and its sample time. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @param Rank: The rank in the injected group sequencer. This parameter must be between 1 and 4. + * @param ADC_SampleTime: The sample time value to be set for the selected channel. + * This parameter can be one of the following values: + * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles + * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles + * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles + * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles + * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles + * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles + * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles + * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles + * @retval None + */ +void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_INJECTED_RANK(Rank)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ + if (ADC_Channel > ADC_Channel_9) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR1; + /* Calculate the mask to clear */ + tmpreg2 = SMPR1_SMP_Set << (3*(ADC_Channel - 10)); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3*(ADC_Channel - 10)); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR1 = tmpreg1; + } + else /* ADC_Channel include in ADC_Channel_[0..9] */ + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR2; + /* Calculate the mask to clear */ + tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR2 = tmpreg1; + } + /* Rank configuration */ + /* Get the old register value */ + tmpreg1 = ADCx->JSQR; + /* Get JL value: Number = JL+1 */ + tmpreg3 = (tmpreg1 & JSQR_JL_Set)>> 20; + /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */ + tmpreg2 = JSQR_JSQ_Set << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); + /* Clear the old JSQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); + /* Set the JSQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->JSQR = tmpreg1; +} + +/** + * @brief Configures the sequencer length for injected channels + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param Length: The sequencer length. + * This parameter must be a number between 1 to 4. + * @retval None + */ +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_LENGTH(Length)); + + /* Get the old register value */ + tmpreg1 = ADCx->JSQR; + /* Clear the old injected sequnence lenght JL bits */ + tmpreg1 &= JSQR_JL_Reset; + /* Set the injected sequnence lenght JL bits */ + tmpreg2 = Length - 1; + tmpreg1 |= tmpreg2 << 20; + /* Store the new register value */ + ADCx->JSQR = tmpreg1; +} + +/** + * @brief Set the injected channels conversion value offset + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InjectedChannel: the ADC injected channel to set its offset. + * This parameter can be one of the following values: + * @arg ADC_InjectedChannel_1: Injected Channel1 selected + * @arg ADC_InjectedChannel_2: Injected Channel2 selected + * @arg ADC_InjectedChannel_3: Injected Channel3 selected + * @arg ADC_InjectedChannel_4: Injected Channel4 selected + * @param Offset: the offset value for the selected ADC injected channel + * This parameter must be a 12bit value. + * @retval None + */ +void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); + assert_param(IS_ADC_OFFSET(Offset)); + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel; + + /* Set the selected injected channel data offset */ + *(__IO uint32_t *) tmp = (uint32_t)Offset; +} + +/** + * @brief Returns the ADC injected channel conversion result + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InjectedChannel: the converted ADC injected channel. + * This parameter can be one of the following values: + * @arg ADC_InjectedChannel_1: Injected Channel1 selected + * @arg ADC_InjectedChannel_2: Injected Channel2 selected + * @arg ADC_InjectedChannel_3: Injected Channel3 selected + * @arg ADC_InjectedChannel_4: Injected Channel4 selected + * @retval The Data conversion value. + */ +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel + JDR_Offset; + + /* Returns the selected injected channel conversion data value */ + return (uint16_t) (*(__IO uint32_t*) tmp); +} + +/** + * @brief Enables or disables the analog watchdog on single/all regular + * or injected channels + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_AnalogWatchdog: the ADC analog watchdog configuration. + * This parameter can be one of the following values: + * @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel + * @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel + * @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel + * @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel + * @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel + * @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels + * @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog + * @retval None + */ +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog)); + /* Get the old register value */ + tmpreg = ADCx->CR1; + /* Clear AWDEN, AWDENJ and AWDSGL bits */ + tmpreg &= CR1_AWDMode_Reset; + /* Set the analog watchdog enable mode */ + tmpreg |= ADC_AnalogWatchdog; + /* Store the new register value */ + ADCx->CR1 = tmpreg; +} + +/** + * @brief Configures the high and low thresholds of the analog watchdog. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param HighThreshold: the ADC analog watchdog High threshold value. + * This parameter must be a 12bit value. + * @param LowThreshold: the ADC analog watchdog Low threshold value. + * This parameter must be a 12bit value. + * @retval None + */ +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, + uint16_t LowThreshold) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_THRESHOLD(HighThreshold)); + assert_param(IS_ADC_THRESHOLD(LowThreshold)); + /* Set the ADCx high threshold */ + ADCx->HTR = HighThreshold; + /* Set the ADCx low threshold */ + ADCx->LTR = LowThreshold; +} + +/** + * @brief Configures the analog watchdog guarded single channel + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure for the analog watchdog. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @retval None + */ +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + /* Get the old register value */ + tmpreg = ADCx->CR1; + /* Clear the Analog watchdog channel select bits */ + tmpreg &= CR1_AWDCH_Reset; + /* Set the Analog watchdog channel */ + tmpreg |= ADC_Channel; + /* Store the new register value */ + ADCx->CR1 = tmpreg; +} + +/** + * @brief Enables or disables the temperature sensor and Vrefint channel. + * @param NewState: new state of the temperature sensor. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_TempSensorVrefintCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the temperature sensor and Vrefint channel*/ + ADC1->CR2 |= CR2_TSVREFE_Set; + } + else + { + /* Disable the temperature sensor and Vrefint channel*/ + ADC1->CR2 &= CR2_TSVREFE_Reset; + } +} + +/** + * @brief Checks whether the specified ADC flag is set or not. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_JEOC: End of injected group conversion flag + * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag + * @arg ADC_FLAG_STRT: Start of regular group conversion flag + * @retval The new state of ADC_FLAG (SET or RESET). + */ +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_GET_FLAG(ADC_FLAG)); + /* Check the status of the specified ADC flag */ + if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET) + { + /* ADC_FLAG is set */ + bitstatus = SET; + } + else + { + /* ADC_FLAG is reset */ + bitstatus = RESET; + } + /* Return the ADC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's pending flags. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_JEOC: End of injected group conversion flag + * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag + * @arg ADC_FLAG_STRT: Start of regular group conversion flag + * @retval None + */ +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG)); + /* Clear the selected ADC flags */ + ADCx->SR = ~(uint32_t)ADC_FLAG; +} + +/** + * @brief Checks whether the specified ADC interrupt has occurred or not. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt source to check. + * This parameter can be one of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @retval The new state of ADC_IT (SET or RESET). + */ +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t itmask = 0, enablestatus = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_GET_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = ADC_IT >> 8; + /* Get the ADC_IT enable bit status */ + enablestatus = (ADCx->CR1 & (uint8_t)ADC_IT) ; + /* Check the status of the specified ADC interrupt */ + if (((ADCx->SR & itmask) != (uint32_t)RESET) && enablestatus) + { + /* ADC_IT is set */ + bitstatus = SET; + } + else + { + /* ADC_IT is reset */ + bitstatus = RESET; + } + /* Return the ADC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's interrupt pending bits. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @retval None + */ +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT) +{ + uint8_t itmask = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = (uint8_t)(ADC_IT >> 8); + /* Clear the selected ADC interrupt pending bits */ + ADCx->SR = ~(uint32_t)itmask; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_bkp.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_bkp.c new file mode 100644 index 0000000..997eecc --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_bkp.c @@ -0,0 +1,308 @@ +/** + ****************************************************************************** + * @file stm32f10x_bkp.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the BKP firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_bkp.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup BKP + * @brief BKP driver modules + * @{ + */ + +/** @defgroup BKP_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_Defines + * @{ + */ + +/* ------------ BKP registers bit address in the alias region --------------- */ +#define BKP_OFFSET (BKP_BASE - PERIPH_BASE) + +/* --- CR Register ----*/ + +/* Alias word address of TPAL bit */ +#define CR_OFFSET (BKP_OFFSET + 0x30) +#define TPAL_BitNumber 0x01 +#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4)) + +/* Alias word address of TPE bit */ +#define TPE_BitNumber 0x00 +#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of TPIE bit */ +#define CSR_OFFSET (BKP_OFFSET + 0x34) +#define TPIE_BitNumber 0x02 +#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4)) + +/* Alias word address of TIF bit */ +#define TIF_BitNumber 0x09 +#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4)) + +/* Alias word address of TEF bit */ +#define TEF_BitNumber 0x08 +#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4)) + +/* ---------------------- BKP registers bit mask ------------------------ */ + +/* RTCCR register bit mask */ +#define RTCCR_CAL_MASK ((uint16_t)0xFF80) +#define RTCCR_MASK ((uint16_t)0xFC7F) + +/** + * @} + */ + + +/** @defgroup BKP_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the BKP peripheral registers to their default reset values. + * @param None + * @retval None + */ +void BKP_DeInit(void) +{ + RCC_BackupResetCmd(ENABLE); + RCC_BackupResetCmd(DISABLE); +} + +/** + * @brief Configures the Tamper Pin active level. + * @param BKP_TamperPinLevel: specifies the Tamper Pin active level. + * This parameter can be one of the following values: + * @arg BKP_TamperPinLevel_High: Tamper pin active on high level + * @arg BKP_TamperPinLevel_Low: Tamper pin active on low level + * @retval None + */ +void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel) +{ + /* Check the parameters */ + assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel)); + *(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel; +} + +/** + * @brief Enables or disables the Tamper Pin activation. + * @param NewState: new state of the Tamper Pin activation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void BKP_TamperPinCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Tamper Pin Interrupt. + * @param NewState: new state of the Tamper Pin Interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void BKP_ITConfig(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState; +} + +/** + * @brief Select the RTC output source to output on the Tamper pin. + * @param BKP_RTCOutputSource: specifies the RTC output source. + * This parameter can be one of the following values: + * @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin. + * @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency + * divided by 64 on the Tamper pin. + * @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on + * the Tamper pin. + * @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on + * the Tamper pin. + * @retval None + */ +void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource) +{ + uint16_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource)); + tmpreg = BKP->RTCCR; + /* Clear CCO, ASOE and ASOS bits */ + tmpreg &= RTCCR_MASK; + + /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */ + tmpreg |= BKP_RTCOutputSource; + /* Store the new value */ + BKP->RTCCR = tmpreg; +} + +/** + * @brief Sets RTC Clock Calibration value. + * @param CalibrationValue: specifies the RTC Clock Calibration value. + * This parameter must be a number between 0 and 0x7F. + * @retval None + */ +void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue) +{ + uint16_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue)); + tmpreg = BKP->RTCCR; + /* Clear CAL[6:0] bits */ + tmpreg &= RTCCR_CAL_MASK; + /* Set CAL[6:0] bits according to CalibrationValue value */ + tmpreg |= CalibrationValue; + /* Store the new value */ + BKP->RTCCR = tmpreg; +} + +/** + * @brief Writes user data to the specified Data Backup Register. + * @param BKP_DR: specifies the Data Backup Register. + * This parameter can be BKP_DRx where x:[1, 42] + * @param Data: data to write + * @retval None + */ +void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_BKP_DR(BKP_DR)); + + tmp = (uint32_t)BKP_BASE; + tmp += BKP_DR; + + *(__IO uint32_t *) tmp = Data; +} + +/** + * @brief Reads data from the specified Data Backup Register. + * @param BKP_DR: specifies the Data Backup Register. + * This parameter can be BKP_DRx where x:[1, 42] + * @retval The content of the specified Data Backup Register + */ +uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_BKP_DR(BKP_DR)); + + tmp = (uint32_t)BKP_BASE; + tmp += BKP_DR; + + return (*(__IO uint16_t *) tmp); +} + +/** + * @brief Checks whether the Tamper Pin Event flag is set or not. + * @param None + * @retval The new state of the Tamper Pin Event flag (SET or RESET). + */ +FlagStatus BKP_GetFlagStatus(void) +{ + return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB); +} + +/** + * @brief Clears Tamper Pin Event pending flag. + * @param None + * @retval None + */ +void BKP_ClearFlag(void) +{ + /* Set CTE bit to clear Tamper Pin Event flag */ + BKP->CSR |= BKP_CSR_CTE; +} + +/** + * @brief Checks whether the Tamper Pin Interrupt has occurred or not. + * @param None + * @retval The new state of the Tamper Pin Interrupt (SET or RESET). + */ +ITStatus BKP_GetITStatus(void) +{ + return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB); +} + +/** + * @brief Clears Tamper Pin Interrupt pending bit. + * @param None + * @retval None + */ +void BKP_ClearITPendingBit(void) +{ + /* Set CTI bit to clear Tamper Pin Interrupt pending bit */ + BKP->CSR |= BKP_CSR_CTI; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_can.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_can.c new file mode 100644 index 0000000..ec8e049 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_can.c @@ -0,0 +1,1415 @@ +/** + ****************************************************************************** + * @file stm32f10x_can.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the CAN firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_can.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup CAN + * @brief CAN driver modules + * @{ + */ + +/** @defgroup CAN_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Private_Defines + * @{ + */ + +/* CAN Master Control Register bits */ + +#define MCR_DBF ((uint32_t)0x00010000) /* software master reset */ + +/* CAN Mailbox Transmit Request */ +#define TMIDxR_TXRQ ((uint32_t)0x00000001) /* Transmit mailbox request */ + +/* CAN Filter Master Register bits */ +#define FMR_FINIT ((uint32_t)0x00000001) /* Filter init mode */ + +/* Time out for INAK bit */ +#define INAK_TIMEOUT ((uint32_t)0x0000FFFF) +/* Time out for SLAK bit */ +#define SLAK_TIMEOUT ((uint32_t)0x0000FFFF) + + + +/* Flags in TSR register */ +#define CAN_FLAGS_TSR ((uint32_t)0x08000000) +/* Flags in RF1R register */ +#define CAN_FLAGS_RF1R ((uint32_t)0x04000000) +/* Flags in RF0R register */ +#define CAN_FLAGS_RF0R ((uint32_t)0x02000000) +/* Flags in MSR register */ +#define CAN_FLAGS_MSR ((uint32_t)0x01000000) +/* Flags in ESR register */ +#define CAN_FLAGS_ESR ((uint32_t)0x00F00000) + +/* Mailboxes definition */ +#define CAN_TXMAILBOX_0 ((uint8_t)0x00) +#define CAN_TXMAILBOX_1 ((uint8_t)0x01) +#define CAN_TXMAILBOX_2 ((uint8_t)0x02) + + + +#define CAN_MODE_MASK ((uint32_t) 0x00000003) +/** + * @} + */ + +/** @defgroup CAN_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Private_FunctionPrototypes + * @{ + */ + +static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit); + +/** + * @} + */ + +/** @defgroup CAN_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the CAN peripheral registers to their default reset values. + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @retval None. + */ +void CAN_DeInit(CAN_TypeDef* CANx) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + if (CANx == CAN1) + { + /* Enable CAN1 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, ENABLE); + /* Release CAN1 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, DISABLE); + } + else + { + /* Enable CAN2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, ENABLE); + /* Release CAN2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, DISABLE); + } +} + +/** + * @brief Initializes the CAN peripheral according to the specified + * parameters in the CAN_InitStruct. + * @param CANx: where x can be 1 or 2 to to select the CAN + * peripheral. + * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure that + * contains the configuration information for the + * CAN peripheral. + * @retval Constant indicates initialization succeed which will be + * CAN_InitStatus_Failed or CAN_InitStatus_Success. + */ +uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct) +{ + uint8_t InitStatus = CAN_InitStatus_Failed; + uint32_t wait_ack = 0x00000000; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP)); + assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode)); + assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW)); + assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1)); + assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2)); + assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler)); + + /* Exit from sleep mode */ + CANx->MCR &= (~(uint32_t)CAN_MCR_SLEEP); + + /* Request initialisation */ + CANx->MCR |= CAN_MCR_INRQ ; + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT)) + { + wait_ack++; + } + + /* Check acknowledge */ + if ((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) + { + InitStatus = CAN_InitStatus_Failed; + } + else + { + /* Set the time triggered communication mode */ + if (CAN_InitStruct->CAN_TTCM == ENABLE) + { + CANx->MCR |= CAN_MCR_TTCM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_TTCM; + } + + /* Set the automatic bus-off management */ + if (CAN_InitStruct->CAN_ABOM == ENABLE) + { + CANx->MCR |= CAN_MCR_ABOM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_ABOM; + } + + /* Set the automatic wake-up mode */ + if (CAN_InitStruct->CAN_AWUM == ENABLE) + { + CANx->MCR |= CAN_MCR_AWUM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_AWUM; + } + + /* Set the no automatic retransmission */ + if (CAN_InitStruct->CAN_NART == ENABLE) + { + CANx->MCR |= CAN_MCR_NART; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_NART; + } + + /* Set the receive FIFO locked mode */ + if (CAN_InitStruct->CAN_RFLM == ENABLE) + { + CANx->MCR |= CAN_MCR_RFLM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_RFLM; + } + + /* Set the transmit FIFO priority */ + if (CAN_InitStruct->CAN_TXFP == ENABLE) + { + CANx->MCR |= CAN_MCR_TXFP; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_TXFP; + } + + /* Set the bit timing register */ + CANx->BTR = (uint32_t)((uint32_t)CAN_InitStruct->CAN_Mode << 30) | \ + ((uint32_t)CAN_InitStruct->CAN_SJW << 24) | \ + ((uint32_t)CAN_InitStruct->CAN_BS1 << 16) | \ + ((uint32_t)CAN_InitStruct->CAN_BS2 << 20) | \ + ((uint32_t)CAN_InitStruct->CAN_Prescaler - 1); + + /* Request leave initialisation */ + CANx->MCR &= ~(uint32_t)CAN_MCR_INRQ; + + /* Wait the acknowledge */ + wait_ack = 0; + + while (((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT)) + { + wait_ack++; + } + + /* ...and check acknowledged */ + if ((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) + { + InitStatus = CAN_InitStatus_Failed; + } + else + { + InitStatus = CAN_InitStatus_Success ; + } + } + + /* At this step, return the status of initialization */ + return InitStatus; +} + +/** + * @brief Initializes the CAN peripheral according to the specified + * parameters in the CAN_FilterInitStruct. + * @param CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef + * structure that contains the configuration + * information. + * @retval None. + */ +void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct) +{ + uint32_t filter_number_bit_pos = 0; + /* Check the parameters */ + assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber)); + assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode)); + assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale)); + assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment)); + assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation)); + + filter_number_bit_pos = ((uint32_t)1) << CAN_FilterInitStruct->CAN_FilterNumber; + + /* Initialisation mode for the filter */ + CAN1->FMR |= FMR_FINIT; + + /* Filter Deactivation */ + CAN1->FA1R &= ~(uint32_t)filter_number_bit_pos; + + /* Filter Scale */ + if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit) + { + /* 16-bit scale for the filter */ + CAN1->FS1R &= ~(uint32_t)filter_number_bit_pos; + + /* First 16-bit identifier and First 16-bit mask */ + /* Or First 16-bit identifier and Second 16-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); + + /* Second 16-bit identifier and Second 16-bit mask */ + /* Or Third 16-bit identifier and Fourth 16-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh); + } + + if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit) + { + /* 32-bit scale for the filter */ + CAN1->FS1R |= filter_number_bit_pos; + /* 32-bit identifier or First 32-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); + /* 32-bit mask or Second 32-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow); + } + + /* Filter Mode */ + if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask) + { + /*Id/Mask mode for the filter*/ + CAN1->FM1R &= ~(uint32_t)filter_number_bit_pos; + } + else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */ + { + /*Identifier list mode for the filter*/ + CAN1->FM1R |= (uint32_t)filter_number_bit_pos; + } + + /* Filter FIFO assignment */ + if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO0) + { + /* FIFO 0 assignation for the filter */ + CAN1->FFA1R &= ~(uint32_t)filter_number_bit_pos; + } + + if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO1) + { + /* FIFO 1 assignation for the filter */ + CAN1->FFA1R |= (uint32_t)filter_number_bit_pos; + } + + /* Filter activation */ + if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE) + { + CAN1->FA1R |= filter_number_bit_pos; + } + + /* Leave the initialisation mode for the filter */ + CAN1->FMR &= ~FMR_FINIT; +} + +/** + * @brief Fills each CAN_InitStruct member with its default value. + * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure which + * will be initialized. + * @retval None. + */ +void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct) +{ + /* Reset CAN init structure parameters values */ + + /* Initialize the time triggered communication mode */ + CAN_InitStruct->CAN_TTCM = DISABLE; + + /* Initialize the automatic bus-off management */ + CAN_InitStruct->CAN_ABOM = DISABLE; + + /* Initialize the automatic wake-up mode */ + CAN_InitStruct->CAN_AWUM = DISABLE; + + /* Initialize the no automatic retransmission */ + CAN_InitStruct->CAN_NART = DISABLE; + + /* Initialize the receive FIFO locked mode */ + CAN_InitStruct->CAN_RFLM = DISABLE; + + /* Initialize the transmit FIFO priority */ + CAN_InitStruct->CAN_TXFP = DISABLE; + + /* Initialize the CAN_Mode member */ + CAN_InitStruct->CAN_Mode = CAN_Mode_Normal; + + /* Initialize the CAN_SJW member */ + CAN_InitStruct->CAN_SJW = CAN_SJW_1tq; + + /* Initialize the CAN_BS1 member */ + CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq; + + /* Initialize the CAN_BS2 member */ + CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq; + + /* Initialize the CAN_Prescaler member */ + CAN_InitStruct->CAN_Prescaler = 1; +} + +/** + * @brief Select the start bank filter for slave CAN. + * @note This function applies only to STM32 Connectivity line devices. + * @param CAN_BankNumber: Select the start slave bank filter from 1..27. + * @retval None. + */ +void CAN_SlaveStartBank(uint8_t CAN_BankNumber) +{ + /* Check the parameters */ + assert_param(IS_CAN_BANKNUMBER(CAN_BankNumber)); + + /* Enter Initialisation mode for the filter */ + CAN1->FMR |= FMR_FINIT; + + /* Select the start slave bank */ + CAN1->FMR &= (uint32_t)0xFFFFC0F1 ; + CAN1->FMR |= (uint32_t)(CAN_BankNumber)<<8; + + /* Leave Initialisation mode for the filter */ + CAN1->FMR &= ~FMR_FINIT; +} + +/** + * @brief Enables or disables the DBG Freeze for CAN. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param NewState: new state of the CAN peripheral. This parameter can + * be: ENABLE or DISABLE. + * @retval None. + */ +void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable Debug Freeze */ + CANx->MCR |= MCR_DBF; + } + else + { + /* Disable Debug Freeze */ + CANx->MCR &= ~MCR_DBF; + } +} + + +/** + * @brief Enables or disabes the CAN Time TriggerOperation communication mode. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param NewState : Mode new state , can be one of @ref FunctionalState. + * @note when enabled, Time stamp (TIME[15:0]) value is sent in the last + * two data bytes of the 8-byte message: TIME[7:0] in data byte 6 + * and TIME[15:8] in data byte 7 + * @note DLC must be programmed as 8 in order Time Stamp (2 bytes) to be + * sent over the CAN bus. + * @retval None + */ +void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the TTCM mode */ + CANx->MCR |= CAN_MCR_TTCM; + + /* Set TGT bits */ + CANx->sTxMailBox[0].TDTR |= ((uint32_t)CAN_TDT0R_TGT); + CANx->sTxMailBox[1].TDTR |= ((uint32_t)CAN_TDT1R_TGT); + CANx->sTxMailBox[2].TDTR |= ((uint32_t)CAN_TDT2R_TGT); + } + else + { + /* Disable the TTCM mode */ + CANx->MCR &= (uint32_t)(~(uint32_t)CAN_MCR_TTCM); + + /* Reset TGT bits */ + CANx->sTxMailBox[0].TDTR &= ((uint32_t)~CAN_TDT0R_TGT); + CANx->sTxMailBox[1].TDTR &= ((uint32_t)~CAN_TDT1R_TGT); + CANx->sTxMailBox[2].TDTR &= ((uint32_t)~CAN_TDT2R_TGT); + } +} +/** + * @brief Initiates the transmission of a message. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param TxMessage: pointer to a structure which contains CAN Id, CAN + * DLC and CAN data. + * @retval The number of the mailbox that is used for transmission + * or CAN_TxStatus_NoMailBox if there is no empty mailbox. + */ +uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage) +{ + uint8_t transmit_mailbox = 0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IDTYPE(TxMessage->IDE)); + assert_param(IS_CAN_RTR(TxMessage->RTR)); + assert_param(IS_CAN_DLC(TxMessage->DLC)); + + /* Select one empty transmit mailbox */ + if ((CANx->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) + { + transmit_mailbox = 0; + } + else if ((CANx->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) + { + transmit_mailbox = 1; + } + else if ((CANx->TSR&CAN_TSR_TME2) == CAN_TSR_TME2) + { + transmit_mailbox = 2; + } + else + { + transmit_mailbox = CAN_TxStatus_NoMailBox; + } + + if (transmit_mailbox != CAN_TxStatus_NoMailBox) + { + /* Set up the Id */ + CANx->sTxMailBox[transmit_mailbox].TIR &= TMIDxR_TXRQ; + if (TxMessage->IDE == CAN_Id_Standard) + { + assert_param(IS_CAN_STDID(TxMessage->StdId)); + CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->StdId << 21) | \ + TxMessage->RTR); + } + else + { + assert_param(IS_CAN_EXTID(TxMessage->ExtId)); + CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->ExtId << 3) | \ + TxMessage->IDE | \ + TxMessage->RTR); + } + + /* Set up the DLC */ + TxMessage->DLC &= (uint8_t)0x0000000F; + CANx->sTxMailBox[transmit_mailbox].TDTR &= (uint32_t)0xFFFFFFF0; + CANx->sTxMailBox[transmit_mailbox].TDTR |= TxMessage->DLC; + + /* Set up the data field */ + CANx->sTxMailBox[transmit_mailbox].TDLR = (((uint32_t)TxMessage->Data[3] << 24) | + ((uint32_t)TxMessage->Data[2] << 16) | + ((uint32_t)TxMessage->Data[1] << 8) | + ((uint32_t)TxMessage->Data[0])); + CANx->sTxMailBox[transmit_mailbox].TDHR = (((uint32_t)TxMessage->Data[7] << 24) | + ((uint32_t)TxMessage->Data[6] << 16) | + ((uint32_t)TxMessage->Data[5] << 8) | + ((uint32_t)TxMessage->Data[4])); + /* Request transmission */ + CANx->sTxMailBox[transmit_mailbox].TIR |= TMIDxR_TXRQ; + } + return transmit_mailbox; +} + +/** + * @brief Checks the transmission of a message. + * @param CANx: where x can be 1 or 2 to to select the + * CAN peripheral. + * @param TransmitMailbox: the number of the mailbox that is used for + * transmission. + * @retval CAN_TxStatus_Ok if the CAN driver transmits the message, CAN_TxStatus_Failed + * in an other case. + */ +uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox) +{ + uint32_t state = 0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox)); + + switch (TransmitMailbox) + { + case (CAN_TXMAILBOX_0): + state = CANx->TSR & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0); + break; + case (CAN_TXMAILBOX_1): + state = CANx->TSR & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1); + break; + case (CAN_TXMAILBOX_2): + state = CANx->TSR & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2); + break; + default: + state = CAN_TxStatus_Failed; + break; + } + switch (state) + { + /* transmit pending */ + case (0x0): state = CAN_TxStatus_Pending; + break; + /* transmit failed */ + case (CAN_TSR_RQCP0 | CAN_TSR_TME0): state = CAN_TxStatus_Failed; + break; + case (CAN_TSR_RQCP1 | CAN_TSR_TME1): state = CAN_TxStatus_Failed; + break; + case (CAN_TSR_RQCP2 | CAN_TSR_TME2): state = CAN_TxStatus_Failed; + break; + /* transmit succeeded */ + case (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0):state = CAN_TxStatus_Ok; + break; + case (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1):state = CAN_TxStatus_Ok; + break; + case (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2):state = CAN_TxStatus_Ok; + break; + default: state = CAN_TxStatus_Failed; + break; + } + return (uint8_t) state; +} + +/** + * @brief Cancels a transmit request. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param Mailbox: Mailbox number. + * @retval None. + */ +void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox)); + /* abort transmission */ + switch (Mailbox) + { + case (CAN_TXMAILBOX_0): CANx->TSR |= CAN_TSR_ABRQ0; + break; + case (CAN_TXMAILBOX_1): CANx->TSR |= CAN_TSR_ABRQ1; + break; + case (CAN_TXMAILBOX_2): CANx->TSR |= CAN_TSR_ABRQ2; + break; + default: + break; + } +} + + +/** + * @brief Receives a message. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @param RxMessage: pointer to a structure receive message which contains + * CAN Id, CAN DLC, CAN datas and FMI number. + * @retval None. + */ +void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + /* Get the Id */ + RxMessage->IDE = (uint8_t)0x04 & CANx->sFIFOMailBox[FIFONumber].RIR; + if (RxMessage->IDE == CAN_Id_Standard) + { + RxMessage->StdId = (uint32_t)0x000007FF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 21); + } + else + { + RxMessage->ExtId = (uint32_t)0x1FFFFFFF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 3); + } + + RxMessage->RTR = (uint8_t)0x02 & CANx->sFIFOMailBox[FIFONumber].RIR; + /* Get the DLC */ + RxMessage->DLC = (uint8_t)0x0F & CANx->sFIFOMailBox[FIFONumber].RDTR; + /* Get the FMI */ + RxMessage->FMI = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDTR >> 8); + /* Get the data field */ + RxMessage->Data[0] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDLR; + RxMessage->Data[1] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 8); + RxMessage->Data[2] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 16); + RxMessage->Data[3] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 24); + RxMessage->Data[4] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDHR; + RxMessage->Data[5] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 8); + RxMessage->Data[6] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 16); + RxMessage->Data[7] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 24); + /* Release the FIFO */ + /* Release FIFO0 */ + if (FIFONumber == CAN_FIFO0) + { + CANx->RF0R |= CAN_RF0R_RFOM0; + } + /* Release FIFO1 */ + else /* FIFONumber == CAN_FIFO1 */ + { + CANx->RF1R |= CAN_RF1R_RFOM1; + } +} + +/** + * @brief Releases the specified FIFO. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1. + * @retval None. + */ +void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + /* Release FIFO0 */ + if (FIFONumber == CAN_FIFO0) + { + CANx->RF0R |= CAN_RF0R_RFOM0; + } + /* Release FIFO1 */ + else /* FIFONumber == CAN_FIFO1 */ + { + CANx->RF1R |= CAN_RF1R_RFOM1; + } +} + +/** + * @brief Returns the number of pending messages. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @retval NbMessage : which is the number of pending message. + */ +uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber) +{ + uint8_t message_pending=0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + if (FIFONumber == CAN_FIFO0) + { + message_pending = (uint8_t)(CANx->RF0R&(uint32_t)0x03); + } + else if (FIFONumber == CAN_FIFO1) + { + message_pending = (uint8_t)(CANx->RF1R&(uint32_t)0x03); + } + else + { + message_pending = 0; + } + return message_pending; +} + + +/** + * @brief Select the CAN Operation mode. + * @param CAN_OperatingMode : CAN Operating Mode. This parameter can be one + * of @ref CAN_OperatingMode_TypeDef enumeration. + * @retval status of the requested mode which can be + * - CAN_ModeStatus_Failed CAN failed entering the specific mode + * - CAN_ModeStatus_Success CAN Succeed entering the specific mode + + */ +uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode) +{ + uint8_t status = CAN_ModeStatus_Failed; + + /* Timeout for INAK or also for SLAK bits*/ + uint32_t timeout = INAK_TIMEOUT; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_OPERATING_MODE(CAN_OperatingMode)); + + if (CAN_OperatingMode == CAN_OperatingMode_Initialization) + { + /* Request initialisation */ + CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_SLEEP)) | CAN_MCR_INRQ); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) && (timeout != 0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else if (CAN_OperatingMode == CAN_OperatingMode_Normal) + { + /* Request leave initialisation and sleep mode and enter Normal mode */ + CANx->MCR &= (uint32_t)(~(CAN_MCR_SLEEP|CAN_MCR_INRQ)); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != 0) && (timeout!=0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != 0) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else if (CAN_OperatingMode == CAN_OperatingMode_Sleep) + { + /* Request Sleep mode */ + CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) && (timeout!=0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else + { + status = CAN_ModeStatus_Failed; + } + + return (uint8_t) status; +} + +/** + * @brief Enters the low power mode. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval status: CAN_Sleep_Ok if sleep entered, CAN_Sleep_Failed in an + * other case. + */ +uint8_t CAN_Sleep(CAN_TypeDef* CANx) +{ + uint8_t sleepstatus = CAN_Sleep_Failed; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Request Sleep mode */ + CANx->MCR = (((CANx->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); + + /* Sleep mode status */ + if ((CANx->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) == CAN_MSR_SLAK) + { + /* Sleep mode not entered */ + sleepstatus = CAN_Sleep_Ok; + } + /* return sleep mode status */ + return (uint8_t)sleepstatus; +} + +/** + * @brief Wakes the CAN up. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval status: CAN_WakeUp_Ok if sleep mode left, CAN_WakeUp_Failed in an + * other case. + */ +uint8_t CAN_WakeUp(CAN_TypeDef* CANx) +{ + uint32_t wait_slak = SLAK_TIMEOUT; + uint8_t wakeupstatus = CAN_WakeUp_Failed; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Wake up request */ + CANx->MCR &= ~(uint32_t)CAN_MCR_SLEEP; + + /* Sleep mode status */ + while(((CANx->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)&&(wait_slak!=0x00)) + { + wait_slak--; + } + if((CANx->MSR & CAN_MSR_SLAK) != CAN_MSR_SLAK) + { + /* wake up done : Sleep mode exited */ + wakeupstatus = CAN_WakeUp_Ok; + } + /* return wakeup status */ + return (uint8_t)wakeupstatus; +} + + +/** + * @brief Returns the CANx's last error code (LEC). + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval CAN_ErrorCode: specifies the Error code : + * - CAN_ERRORCODE_NoErr No Error + * - CAN_ERRORCODE_StuffErr Stuff Error + * - CAN_ERRORCODE_FormErr Form Error + * - CAN_ERRORCODE_ACKErr Acknowledgment Error + * - CAN_ERRORCODE_BitRecessiveErr Bit Recessive Error + * - CAN_ERRORCODE_BitDominantErr Bit Dominant Error + * - CAN_ERRORCODE_CRCErr CRC Error + * - CAN_ERRORCODE_SoftwareSetErr Software Set Error + */ + +uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx) +{ + uint8_t errorcode=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the error code*/ + errorcode = (((uint8_t)CANx->ESR) & (uint8_t)CAN_ESR_LEC); + + /* Return the error code*/ + return errorcode; +} +/** + * @brief Returns the CANx Receive Error Counter (REC). + * @note In case of an error during reception, this counter is incremented + * by 1 or by 8 depending on the error condition as defined by the CAN + * standard. After every successful reception, the counter is + * decremented by 1 or reset to 120 if its value was higher than 128. + * When the counter value exceeds 127, the CAN controller enters the + * error passive state. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval CAN Receive Error Counter. + */ +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx) +{ + uint8_t counter=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the Receive Error Counter*/ + counter = (uint8_t)((CANx->ESR & CAN_ESR_REC)>> 24); + + /* Return the Receive Error Counter*/ + return counter; +} + + +/** + * @brief Returns the LSB of the 9-bit CANx Transmit Error Counter(TEC). + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval LSB of the 9-bit CAN Transmit Error Counter. + */ +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx) +{ + uint8_t counter=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the LSB of the 9-bit CANx Transmit Error Counter(TEC) */ + counter = (uint8_t)((CANx->ESR & CAN_ESR_TEC)>> 16); + + /* Return the LSB of the 9-bit CANx Transmit Error Counter(TEC) */ + return counter; +} + + +/** + * @brief Enables or disables the specified CANx interrupts. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the CAN interrupt sources to be enabled or disabled. + * This parameter can be: + * - CAN_IT_TME, + * - CAN_IT_FMP0, + * - CAN_IT_FF0, + * - CAN_IT_FOV0, + * - CAN_IT_FMP1, + * - CAN_IT_FF1, + * - CAN_IT_FOV1, + * - CAN_IT_EWG, + * - CAN_IT_EPV, + * - CAN_IT_LEC, + * - CAN_IT_ERR, + * - CAN_IT_WKU or + * - CAN_IT_SLK. + * @param NewState: new state of the CAN interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IT(CAN_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected CANx interrupt */ + CANx->IER |= CAN_IT; + } + else + { + /* Disable the selected CANx interrupt */ + CANx->IER &= ~CAN_IT; + } +} +/** + * @brief Checks whether the specified CAN flag is set or not. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_FLAG: specifies the flag to check. + * This parameter can be one of the following flags: + * - CAN_FLAG_EWG + * - CAN_FLAG_EPV + * - CAN_FLAG_BOF + * - CAN_FLAG_RQCP0 + * - CAN_FLAG_RQCP1 + * - CAN_FLAG_RQCP2 + * - CAN_FLAG_FMP1 + * - CAN_FLAG_FF1 + * - CAN_FLAG_FOV1 + * - CAN_FLAG_FMP0 + * - CAN_FLAG_FF0 + * - CAN_FLAG_FOV0 + * - CAN_FLAG_WKU + * - CAN_FLAG_SLAK + * - CAN_FLAG_LEC + * @retval The new state of CAN_FLAG (SET or RESET). + */ +FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_GET_FLAG(CAN_FLAG)); + + + if((CAN_FLAG & CAN_FLAGS_ESR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->ESR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_MSR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->MSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_TSR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->TSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_RF0R) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->RF0R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else /* If(CAN_FLAG & CAN_FLAGS_RF1R != (uint32_t)RESET) */ + { + /* Check the status of the specified CAN flag */ + if ((uint32_t)(CANx->RF1R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + /* Return the CAN_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the CAN's pending flags. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_FLAG: specifies the flag to clear. + * This parameter can be one of the following flags: + * - CAN_FLAG_RQCP0 + * - CAN_FLAG_RQCP1 + * - CAN_FLAG_RQCP2 + * - CAN_FLAG_FF1 + * - CAN_FLAG_FOV1 + * - CAN_FLAG_FF0 + * - CAN_FLAG_FOV0 + * - CAN_FLAG_WKU + * - CAN_FLAG_SLAK + * - CAN_FLAG_LEC + * @retval None. + */ +void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG) +{ + uint32_t flagtmp=0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_CLEAR_FLAG(CAN_FLAG)); + + if (CAN_FLAG == CAN_FLAG_LEC) /* ESR register */ + { + /* Clear the selected CAN flags */ + CANx->ESR = (uint32_t)RESET; + } + else /* MSR or TSR or RF0R or RF1R */ + { + flagtmp = CAN_FLAG & 0x000FFFFF; + + if ((CAN_FLAG & CAN_FLAGS_RF0R)!=(uint32_t)RESET) + { + /* Receive Flags */ + CANx->RF0R = (uint32_t)(flagtmp); + } + else if ((CAN_FLAG & CAN_FLAGS_RF1R)!=(uint32_t)RESET) + { + /* Receive Flags */ + CANx->RF1R = (uint32_t)(flagtmp); + } + else if ((CAN_FLAG & CAN_FLAGS_TSR)!=(uint32_t)RESET) + { + /* Transmit Flags */ + CANx->TSR = (uint32_t)(flagtmp); + } + else /* If((CAN_FLAG & CAN_FLAGS_MSR)!=(uint32_t)RESET) */ + { + /* Operating mode Flags */ + CANx->MSR = (uint32_t)(flagtmp); + } + } +} + +/** + * @brief Checks whether the specified CANx interrupt has occurred or not. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the CAN interrupt source to check. + * This parameter can be one of the following flags: + * - CAN_IT_TME + * - CAN_IT_FMP0 + * - CAN_IT_FF0 + * - CAN_IT_FOV0 + * - CAN_IT_FMP1 + * - CAN_IT_FF1 + * - CAN_IT_FOV1 + * - CAN_IT_WKU + * - CAN_IT_SLK + * - CAN_IT_EWG + * - CAN_IT_EPV + * - CAN_IT_BOF + * - CAN_IT_LEC + * - CAN_IT_ERR + * @retval The current state of CAN_IT (SET or RESET). + */ +ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT) +{ + ITStatus itstatus = RESET; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IT(CAN_IT)); + + /* check the enable interrupt bit */ + if((CANx->IER & CAN_IT) != RESET) + { + /* in case the Interrupt is enabled, .... */ + switch (CAN_IT) + { + case CAN_IT_TME: + /* Check CAN_TSR_RQCPx bits */ + itstatus = CheckITStatus(CANx->TSR, CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2); + break; + case CAN_IT_FMP0: + /* Check CAN_RF0R_FMP0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FMP0); + break; + case CAN_IT_FF0: + /* Check CAN_RF0R_FULL0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FULL0); + break; + case CAN_IT_FOV0: + /* Check CAN_RF0R_FOVR0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FOVR0); + break; + case CAN_IT_FMP1: + /* Check CAN_RF1R_FMP1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FMP1); + break; + case CAN_IT_FF1: + /* Check CAN_RF1R_FULL1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FULL1); + break; + case CAN_IT_FOV1: + /* Check CAN_RF1R_FOVR1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FOVR1); + break; + case CAN_IT_WKU: + /* Check CAN_MSR_WKUI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_WKUI); + break; + case CAN_IT_SLK: + /* Check CAN_MSR_SLAKI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_SLAKI); + break; + case CAN_IT_EWG: + /* Check CAN_ESR_EWGF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EWGF); + break; + case CAN_IT_EPV: + /* Check CAN_ESR_EPVF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EPVF); + break; + case CAN_IT_BOF: + /* Check CAN_ESR_BOFF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_BOFF); + break; + case CAN_IT_LEC: + /* Check CAN_ESR_LEC bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_LEC); + break; + case CAN_IT_ERR: + /* Check CAN_MSR_ERRI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_ERRI); + break; + default : + /* in case of error, return RESET */ + itstatus = RESET; + break; + } + } + else + { + /* in case the Interrupt is not enabled, return RESET */ + itstatus = RESET; + } + + /* Return the CAN_IT status */ + return itstatus; +} + +/** + * @brief Clears the CANx's interrupt pending bits. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the interrupt pending bit to clear. + * - CAN_IT_TME + * - CAN_IT_FF0 + * - CAN_IT_FOV0 + * - CAN_IT_FF1 + * - CAN_IT_FOV1 + * - CAN_IT_WKU + * - CAN_IT_SLK + * - CAN_IT_EWG + * - CAN_IT_EPV + * - CAN_IT_BOF + * - CAN_IT_LEC + * - CAN_IT_ERR + * @retval None. + */ +void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_CLEAR_IT(CAN_IT)); + + switch (CAN_IT) + { + case CAN_IT_TME: + /* Clear CAN_TSR_RQCPx (rc_w1)*/ + CANx->TSR = CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2; + break; + case CAN_IT_FF0: + /* Clear CAN_RF0R_FULL0 (rc_w1)*/ + CANx->RF0R = CAN_RF0R_FULL0; + break; + case CAN_IT_FOV0: + /* Clear CAN_RF0R_FOVR0 (rc_w1)*/ + CANx->RF0R = CAN_RF0R_FOVR0; + break; + case CAN_IT_FF1: + /* Clear CAN_RF1R_FULL1 (rc_w1)*/ + CANx->RF1R = CAN_RF1R_FULL1; + break; + case CAN_IT_FOV1: + /* Clear CAN_RF1R_FOVR1 (rc_w1)*/ + CANx->RF1R = CAN_RF1R_FOVR1; + break; + case CAN_IT_WKU: + /* Clear CAN_MSR_WKUI (rc_w1)*/ + CANx->MSR = CAN_MSR_WKUI; + break; + case CAN_IT_SLK: + /* Clear CAN_MSR_SLAKI (rc_w1)*/ + CANx->MSR = CAN_MSR_SLAKI; + break; + case CAN_IT_EWG: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* Note : the corresponding Flag is cleared by hardware depending + of the CAN Bus status*/ + break; + case CAN_IT_EPV: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* Note : the corresponding Flag is cleared by hardware depending + of the CAN Bus status*/ + break; + case CAN_IT_BOF: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* Note : the corresponding Flag is cleared by hardware depending + of the CAN Bus status*/ + break; + case CAN_IT_LEC: + /* Clear LEC bits */ + CANx->ESR = RESET; + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + break; + case CAN_IT_ERR: + /*Clear LEC bits */ + CANx->ESR = RESET; + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* Note : BOFF, EPVF and EWGF Flags are cleared by hardware depending + of the CAN Bus status*/ + break; + default : + break; + } +} + +/** + * @brief Checks whether the CAN interrupt has occurred or not. + * @param CAN_Reg: specifies the CAN interrupt register to check. + * @param It_Bit: specifies the interrupt source bit to check. + * @retval The new state of the CAN Interrupt (SET or RESET). + */ +static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit) +{ + ITStatus pendingbitstatus = RESET; + + if ((CAN_Reg & It_Bit) != (uint32_t)RESET) + { + /* CAN_IT is set */ + pendingbitstatus = SET; + } + else + { + /* CAN_IT is reset */ + pendingbitstatus = RESET; + } + return pendingbitstatus; +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_cec.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_cec.c new file mode 100644 index 0000000..4dc615f --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_cec.c @@ -0,0 +1,433 @@ +/** + ****************************************************************************** + * @file stm32f10x_cec.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the CEC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_cec.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup CEC + * @brief CEC driver modules + * @{ + */ + +/** @defgroup CEC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_Defines + * @{ + */ + +/* ------------ CEC registers bit address in the alias region ----------- */ +#define CEC_OFFSET (CEC_BASE - PERIPH_BASE) + +/* --- CFGR Register ---*/ + +/* Alias word address of PE bit */ +#define CFGR_OFFSET (CEC_OFFSET + 0x00) +#define PE_BitNumber 0x00 +#define CFGR_PE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (PE_BitNumber * 4)) + +/* Alias word address of IE bit */ +#define IE_BitNumber 0x01 +#define CFGR_IE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (IE_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of TSOM bit */ +#define CSR_OFFSET (CEC_OFFSET + 0x10) +#define TSOM_BitNumber 0x00 +#define CSR_TSOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TSOM_BitNumber * 4)) + +/* Alias word address of TEOM bit */ +#define TEOM_BitNumber 0x01 +#define CSR_TEOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEOM_BitNumber * 4)) + +#define CFGR_CLEAR_Mask (uint8_t)(0xF3) /* CFGR register Mask */ +#define FLAG_Mask ((uint32_t)0x00FFFFFF) /* CEC FLAG mask */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_Macros + * @{ + */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_Variables + * @{ + */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the CEC peripheral registers to their default reset + * values. + * @param None + * @retval None + */ +void CEC_DeInit(void) +{ + /* Enable CEC reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, ENABLE); + /* Release CEC from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, DISABLE); +} + + +/** + * @brief Initializes the CEC peripheral according to the specified + * parameters in the CEC_InitStruct. + * @param CEC_InitStruct: pointer to an CEC_InitTypeDef structure that + * contains the configuration information for the specified + * CEC peripheral. + * @retval None + */ +void CEC_Init(CEC_InitTypeDef* CEC_InitStruct) +{ + uint16_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_CEC_BIT_TIMING_ERROR_MODE(CEC_InitStruct->CEC_BitTimingMode)); + assert_param(IS_CEC_BIT_PERIOD_ERROR_MODE(CEC_InitStruct->CEC_BitPeriodMode)); + + /*---------------------------- CEC CFGR Configuration -----------------*/ + /* Get the CEC CFGR value */ + tmpreg = CEC->CFGR; + + /* Clear BTEM and BPEM bits */ + tmpreg &= CFGR_CLEAR_Mask; + + /* Configure CEC: Bit Timing Error and Bit Period Error */ + tmpreg |= (uint16_t)(CEC_InitStruct->CEC_BitTimingMode | CEC_InitStruct->CEC_BitPeriodMode); + + /* Write to CEC CFGR register*/ + CEC->CFGR = tmpreg; + +} + +/** + * @brief Enables or disables the specified CEC peripheral. + * @param NewState: new state of the CEC peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CEC_Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CFGR_PE_BB = (uint32_t)NewState; + + if(NewState == DISABLE) + { + /* Wait until the PE bit is cleared by hardware (Idle Line detected) */ + while((CEC->CFGR & CEC_CFGR_PE) != (uint32_t)RESET) + { + } + } +} + +/** + * @brief Enables or disables the CEC interrupt. + * @param NewState: new state of the CEC interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CEC_ITConfig(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CFGR_IE_BB = (uint32_t)NewState; +} + +/** + * @brief Defines the Own Address of the CEC device. + * @param CEC_OwnAddress: The CEC own address + * @retval None + */ +void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress) +{ + /* Check the parameters */ + assert_param(IS_CEC_ADDRESS(CEC_OwnAddress)); + + /* Set the CEC own address */ + CEC->OAR = CEC_OwnAddress; +} + +/** + * @brief Sets the CEC prescaler value. + * @param CEC_Prescaler: CEC prescaler new value + * @retval None + */ +void CEC_SetPrescaler(uint16_t CEC_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_CEC_PRESCALER(CEC_Prescaler)); + + /* Set the Prescaler value*/ + CEC->PRES = CEC_Prescaler; +} + +/** + * @brief Transmits single data through the CEC peripheral. + * @param Data: the data to transmit. + * @retval None + */ +void CEC_SendDataByte(uint8_t Data) +{ + /* Transmit Data */ + CEC->TXD = Data ; +} + + +/** + * @brief Returns the most recent received data by the CEC peripheral. + * @param None + * @retval The received data. + */ +uint8_t CEC_ReceiveDataByte(void) +{ + /* Receive Data */ + return (uint8_t)(CEC->RXD); +} + +/** + * @brief Starts a new message. + * @param None + * @retval None + */ +void CEC_StartOfMessage(void) +{ + /* Starts of new message */ + *(__IO uint32_t *) CSR_TSOM_BB = (uint32_t)0x1; +} + +/** + * @brief Transmits message with or without an EOM bit. + * @param NewState: new state of the CEC Tx End Of Message. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CEC_EndOfMessageCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* The data byte will be transmitted with or without an EOM bit*/ + *(__IO uint32_t *) CSR_TEOM_BB = (uint32_t)NewState; +} + +/** + * @brief Gets the CEC flag status + * @param CEC_FLAG: specifies the CEC flag to check. + * This parameter can be one of the following values: + * @arg CEC_FLAG_BTE: Bit Timing Error + * @arg CEC_FLAG_BPE: Bit Period Error + * @arg CEC_FLAG_RBTFE: Rx Block Transfer Finished Error + * @arg CEC_FLAG_SBE: Start Bit Error + * @arg CEC_FLAG_ACKE: Block Acknowledge Error + * @arg CEC_FLAG_LINE: Line Error + * @arg CEC_FLAG_TBTFE: Tx Block Transfer Finished Error + * @arg CEC_FLAG_TEOM: Tx End Of Message + * @arg CEC_FLAG_TERR: Tx Error + * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished + * @arg CEC_FLAG_RSOM: Rx Start Of Message + * @arg CEC_FLAG_REOM: Rx End Of Message + * @arg CEC_FLAG_RERR: Rx Error + * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished + * @retval The new state of CEC_FLAG (SET or RESET) + */ +FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t cecreg = 0, cecbase = 0; + + /* Check the parameters */ + assert_param(IS_CEC_GET_FLAG(CEC_FLAG)); + + /* Get the CEC peripheral base address */ + cecbase = (uint32_t)(CEC_BASE); + + /* Read flag register index */ + cecreg = CEC_FLAG >> 28; + + /* Get bit[23:0] of the flag */ + CEC_FLAG &= FLAG_Mask; + + if(cecreg != 0) + { + /* Flag in CEC ESR Register */ + CEC_FLAG = (uint32_t)(CEC_FLAG >> 16); + + /* Get the CEC ESR register address */ + cecbase += 0xC; + } + else + { + /* Get the CEC CSR register address */ + cecbase += 0x10; + } + + if(((*(__IO uint32_t *)cecbase) & CEC_FLAG) != (uint32_t)RESET) + { + /* CEC_FLAG is set */ + bitstatus = SET; + } + else + { + /* CEC_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the CEC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the CEC's pending flags. + * @param CEC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg CEC_FLAG_TERR: Tx Error + * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished + * @arg CEC_FLAG_RSOM: Rx Start Of Message + * @arg CEC_FLAG_REOM: Rx End Of Message + * @arg CEC_FLAG_RERR: Rx Error + * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished + * @retval None + */ +void CEC_ClearFlag(uint32_t CEC_FLAG) +{ + uint32_t tmp = 0x0; + + /* Check the parameters */ + assert_param(IS_CEC_CLEAR_FLAG(CEC_FLAG)); + + tmp = CEC->CSR & 0x2; + + /* Clear the selected CEC flags */ + CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_FLAG) & 0xFFFFFFFC) | tmp); +} + +/** + * @brief Checks whether the specified CEC interrupt has occurred or not. + * @param CEC_IT: specifies the CEC interrupt source to check. + * This parameter can be one of the following values: + * @arg CEC_IT_TERR: Tx Error + * @arg CEC_IT_TBTF: Tx Block Transfer Finished + * @arg CEC_IT_RERR: Rx Error + * @arg CEC_IT_RBTF: Rx Block Transfer Finished + * @retval The new state of CEC_IT (SET or RESET). + */ +ITStatus CEC_GetITStatus(uint8_t CEC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_CEC_GET_IT(CEC_IT)); + + /* Get the CEC IT enable bit status */ + enablestatus = (CEC->CFGR & (uint8_t)CEC_CFGR_IE) ; + + /* Check the status of the specified CEC interrupt */ + if (((CEC->CSR & CEC_IT) != (uint32_t)RESET) && enablestatus) + { + /* CEC_IT is set */ + bitstatus = SET; + } + else + { + /* CEC_IT is reset */ + bitstatus = RESET; + } + /* Return the CEC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the CEC's interrupt pending bits. + * @param CEC_IT: specifies the CEC interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg CEC_IT_TERR: Tx Error + * @arg CEC_IT_TBTF: Tx Block Transfer Finished + * @arg CEC_IT_RERR: Rx Error + * @arg CEC_IT_RBTF: Rx Block Transfer Finished + * @retval None + */ +void CEC_ClearITPendingBit(uint16_t CEC_IT) +{ + uint32_t tmp = 0x0; + + /* Check the parameters */ + assert_param(IS_CEC_GET_IT(CEC_IT)); + + tmp = CEC->CSR & 0x2; + + /* Clear the selected CEC interrupt pending bits */ + CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_IT) & 0xFFFFFFFC) | tmp); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_crc.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_crc.c new file mode 100644 index 0000000..6501728 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_crc.c @@ -0,0 +1,160 @@ +/** + ****************************************************************************** + * @file stm32f10x_crc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the CRC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_crc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup CRC + * @brief CRC driver modules + * @{ + */ + +/** @defgroup CRC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_Defines + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_Functions + * @{ + */ + +/** + * @brief Resets the CRC Data register (DR). + * @param None + * @retval None + */ +void CRC_ResetDR(void) +{ + /* Reset CRC generator */ + CRC->CR = CRC_CR_RESET; +} + +/** + * @brief Computes the 32-bit CRC of a given data word(32-bit). + * @param Data: data word(32-bit) to compute its CRC + * @retval 32-bit CRC + */ +uint32_t CRC_CalcCRC(uint32_t Data) +{ + CRC->DR = Data; + + return (CRC->DR); +} + +/** + * @brief Computes the 32-bit CRC of a given buffer of data word(32-bit). + * @param pBuffer: pointer to the buffer containing the data to be computed + * @param BufferLength: length of the buffer to be computed + * @retval 32-bit CRC + */ +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index = 0; + + for(index = 0; index < BufferLength; index++) + { + CRC->DR = pBuffer[index]; + } + return (CRC->DR); +} + +/** + * @brief Returns the current CRC value. + * @param None + * @retval 32-bit CRC + */ +uint32_t CRC_GetCRC(void) +{ + return (CRC->DR); +} + +/** + * @brief Stores a 8-bit data in the Independent Data(ID) register. + * @param IDValue: 8-bit value to be stored in the ID register + * @retval None + */ +void CRC_SetIDRegister(uint8_t IDValue) +{ + CRC->IDR = IDValue; +} + +/** + * @brief Returns the 8-bit data stored in the Independent Data(ID) register + * @param None + * @retval 8-bit value of the ID register + */ +uint8_t CRC_GetIDRegister(void) +{ + return (CRC->IDR); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_dac.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_dac.c new file mode 100644 index 0000000..1cfc71d --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_dac.c @@ -0,0 +1,571 @@ +/** + ****************************************************************************** + * @file stm32f10x_dac.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the DAC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_dac.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup DAC + * @brief DAC driver modules + * @{ + */ + +/** @defgroup DAC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Defines + * @{ + */ + +/* CR register Mask */ +#define CR_CLEAR_MASK ((uint32_t)0x00000FFE) + +/* DAC Dual Channels SWTRIG masks */ +#define DUAL_SWTRIG_SET ((uint32_t)0x00000003) +#define DUAL_SWTRIG_RESET ((uint32_t)0xFFFFFFFC) + +/* DHR registers offsets */ +#define DHR12R1_OFFSET ((uint32_t)0x00000008) +#define DHR12R2_OFFSET ((uint32_t)0x00000014) +#define DHR12RD_OFFSET ((uint32_t)0x00000020) + +/* DOR register offset */ +#define DOR_OFFSET ((uint32_t)0x0000002C) +/** + * @} + */ + +/** @defgroup DAC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the DAC peripheral registers to their default reset values. + * @param None + * @retval None + */ +void DAC_DeInit(void) +{ + /* Enable DAC reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE); + /* Release DAC from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE); +} + +/** + * @brief Initializes the DAC peripheral according to the specified + * parameters in the DAC_InitStruct. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that + * contains the configuration information for the specified DAC channel. + * @retval None + */ +void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0; + /* Check the DAC parameters */ + assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger)); + assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude)); + assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer)); +/*---------------------------- DAC CR Configuration --------------------------*/ + /* Get the DAC CR value */ + tmpreg1 = DAC->CR; + /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ + tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel); + /* Configure for the selected DAC channel: buffer output, trigger, wave generation, + mask/amplitude for wave generation */ + /* Set TSELx and TENx bits according to DAC_Trigger value */ + /* Set WAVEx bits according to DAC_WaveGeneration value */ + /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ + /* Set BOFFx bit according to DAC_OutputBuffer value */ + tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration | + DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer); + /* Calculate CR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << DAC_Channel; + /* Write to DAC CR */ + DAC->CR = tmpreg1; +} + +/** + * @brief Fills each DAC_InitStruct member with its default value. + * @param DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct) +{ +/*--------------- Reset DAC init structure parameters values -----------------*/ + /* Initialize the DAC_Trigger member */ + DAC_InitStruct->DAC_Trigger = DAC_Trigger_None; + /* Initialize the DAC_WaveGeneration member */ + DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None; + /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */ + DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0; + /* Initialize the DAC_OutputBuffer member */ + DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable; +} + +/** + * @brief Enables or disables the specified DAC channel. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param NewState: new state of the DAC channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected DAC channel */ + DAC->CR |= (DAC_CR_EN1 << DAC_Channel); + } + else + { + /* Disable the selected DAC channel */ + DAC->CR &= ~(DAC_CR_EN1 << DAC_Channel); + } +} +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/** + * @brief Enables or disables the specified DAC interrupts. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_IT: specifies the DAC interrupt sources to be enabled or disabled. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @param NewState: new state of the specified DAC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_DAC_IT(DAC_IT)); + + if (NewState != DISABLE) + { + /* Enable the selected DAC interrupts */ + DAC->CR |= (DAC_IT << DAC_Channel); + } + else + { + /* Disable the selected DAC interrupts */ + DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel)); + } +} +#endif + +/** + * @brief Enables or disables the specified DAC channel DMA request. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param NewState: new state of the selected DAC channel DMA request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected DAC channel DMA request */ + DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel); + } + else + { + /* Disable the selected DAC channel DMA request */ + DAC->CR &= ~(DAC_CR_DMAEN1 << DAC_Channel); + } +} + +/** + * @brief Enables or disables the selected DAC channel software trigger. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param NewState: new state of the selected DAC channel software trigger. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable software trigger for the selected DAC channel */ + DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4); + } + else + { + /* Disable software trigger for the selected DAC channel */ + DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4)); + } +} + +/** + * @brief Enables or disables simultaneously the two DAC channels software + * triggers. + * @param NewState: new state of the DAC channels software triggers. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_DualSoftwareTriggerCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable software trigger for both DAC channels */ + DAC->SWTRIGR |= DUAL_SWTRIG_SET ; + } + else + { + /* Disable software trigger for both DAC channels */ + DAC->SWTRIGR &= DUAL_SWTRIG_RESET; + } +} + +/** + * @brief Enables or disables the selected DAC channel wave generation. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_Wave: Specifies the wave type to enable or disable. + * This parameter can be one of the following values: + * @arg DAC_Wave_Noise: noise wave generation + * @arg DAC_Wave_Triangle: triangle wave generation + * @param NewState: new state of the selected DAC channel wave generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_WAVE(DAC_Wave)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected wave generation for the selected DAC channel */ + DAC->CR |= DAC_Wave << DAC_Channel; + } + else + { + /* Disable the selected wave generation for the selected DAC channel */ + DAC->CR &= ~(DAC_Wave << DAC_Channel); + } +} + +/** + * @brief Set the specified data holding register value for DAC channel1. + * @param DAC_Align: Specifies the data alignment for DAC channel1. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data : Data to be loaded in the selected data holding register. + * @retval None + */ +void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12R1_OFFSET + DAC_Align; + + /* Set the DAC channel1 selected data holding register */ + *(__IO uint32_t *) tmp = Data; +} + +/** + * @brief Set the specified data holding register value for DAC channel2. + * @param DAC_Align: Specifies the data alignment for DAC channel2. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data : Data to be loaded in the selected data holding register. + * @retval None + */ +void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12R2_OFFSET + DAC_Align; + + /* Set the DAC channel2 selected data holding register */ + *(__IO uint32_t *)tmp = Data; +} + +/** + * @brief Set the specified data holding register value for dual channel + * DAC. + * @param DAC_Align: Specifies the data alignment for dual channel DAC. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data2: Data for DAC Channel2 to be loaded in the selected data + * holding register. + * @param Data1: Data for DAC Channel1 to be loaded in the selected data + * holding register. + * @retval None + */ +void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1) +{ + uint32_t data = 0, tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data1)); + assert_param(IS_DAC_DATA(Data2)); + + /* Calculate and set dual DAC data holding register value */ + if (DAC_Align == DAC_Align_8b_R) + { + data = ((uint32_t)Data2 << 8) | Data1; + } + else + { + data = ((uint32_t)Data2 << 16) | Data1; + } + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12RD_OFFSET + DAC_Align; + + /* Set the dual DAC selected data holding register */ + *(__IO uint32_t *)tmp = data; +} + +/** + * @brief Returns the last data output value of the selected DAC channel. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @retval The selected DAC channel data output value. + */ +uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + + tmp = (uint32_t) DAC_BASE ; + tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2); + + /* Returns the DAC channel data output register value */ + return (uint16_t) (*(__IO uint32_t*) tmp); +} + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/** + * @brief Checks whether the specified DAC flag is set or not. + * @param DAC_Channel: thee selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_FLAG: specifies the flag to check. + * This parameter can be only of the following value: + * @arg DAC_FLAG_DMAUDR: DMA underrun flag + * @retval The new state of DAC_FLAG (SET or RESET). + */ +FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_FLAG(DAC_FLAG)); + + /* Check the status of the specified DAC flag */ + if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET) + { + /* DAC_FLAG is set */ + bitstatus = SET; + } + else + { + /* DAC_FLAG is reset */ + bitstatus = RESET; + } + /* Return the DAC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the DAC channelx's pending flags. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_FLAG: specifies the flag to clear. + * This parameter can be of the following value: + * @arg DAC_FLAG_DMAUDR: DMA underrun flag + * @retval None + */ +void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_FLAG(DAC_FLAG)); + + /* Clear the selected DAC flags */ + DAC->SR = (DAC_FLAG << DAC_Channel); +} + +/** + * @brief Checks whether the specified DAC interrupt has occurred or not. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_IT: specifies the DAC interrupt source to check. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @retval The new state of DAC_IT (SET or RESET). + */ +ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_IT(DAC_IT)); + + /* Get the DAC_IT enable bit status */ + enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ; + + /* Check the status of the specified DAC interrupt */ + if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus) + { + /* DAC_IT is set */ + bitstatus = SET; + } + else + { + /* DAC_IT is reset */ + bitstatus = RESET; + } + /* Return the DAC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the DAC channelx's interrupt pending bits. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_IT: specifies the DAC interrupt pending bit to clear. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @retval None + */ +void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_IT(DAC_IT)); + + /* Clear the selected DAC interrupt pending bits */ + DAC->SR = (DAC_IT << DAC_Channel); +} +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_dbgmcu.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_dbgmcu.c new file mode 100644 index 0000000..96a8fde --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_dbgmcu.c @@ -0,0 +1,162 @@ +/** + ****************************************************************************** + * @file stm32f10x_dbgmcu.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the DBGMCU firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_dbgmcu.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup DBGMCU + * @brief DBGMCU driver modules + * @{ + */ + +/** @defgroup DBGMCU_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Private_Defines + * @{ + */ + +#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) +/** + * @} + */ + +/** @defgroup DBGMCU_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Private_Functions + * @{ + */ + +/** + * @brief Returns the device revision identifier. + * @param None + * @retval Device revision identifier + */ +uint32_t DBGMCU_GetREVID(void) +{ + return(DBGMCU->IDCODE >> 16); +} + +/** + * @brief Returns the device identifier. + * @param None + * @retval Device identifier + */ +uint32_t DBGMCU_GetDEVID(void) +{ + return(DBGMCU->IDCODE & IDCODE_DEVID_MASK); +} + +/** + * @brief Configures the specified peripheral and low power mode behavior + * when the MCU under Debug mode. + * @param DBGMCU_Periph: specifies the peripheral and low power mode. + * This parameter can be any combination of the following values: + * @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode + * @arg DBGMCU_STOP: Keep debugger connection during STOP mode + * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode + * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted + * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted + * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted + * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted + * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted + * @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted + * @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted + * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted + * @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted + * @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted + * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted + * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted + * @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted + * @arg DBGMCU_CAN2_STOP: Debug CAN2 stopped when Core is halted + * @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted + * @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted + * @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted + * @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted + * @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted + * @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted + * @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted + * @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted + * @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted + * @param NewState: new state of the specified peripheral in Debug mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + DBGMCU->CR |= DBGMCU_Periph; + } + else + { + DBGMCU->CR &= ~DBGMCU_Periph; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_dma.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_dma.c new file mode 100644 index 0000000..bf072df --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_dma.c @@ -0,0 +1,714 @@ +/** + ****************************************************************************** + * @file stm32f10x_dma.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the DMA firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_dma.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup DMA + * @brief DMA driver modules + * @{ + */ + +/** @defgroup DMA_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup DMA_Private_Defines + * @{ + */ + + +/* DMA1 Channelx interrupt pending bit masks */ +#define DMA1_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1)) +#define DMA1_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2)) +#define DMA1_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3)) +#define DMA1_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4)) +#define DMA1_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5)) +#define DMA1_Channel6_IT_Mask ((uint32_t)(DMA_ISR_GIF6 | DMA_ISR_TCIF6 | DMA_ISR_HTIF6 | DMA_ISR_TEIF6)) +#define DMA1_Channel7_IT_Mask ((uint32_t)(DMA_ISR_GIF7 | DMA_ISR_TCIF7 | DMA_ISR_HTIF7 | DMA_ISR_TEIF7)) + +/* DMA2 Channelx interrupt pending bit masks */ +#define DMA2_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1)) +#define DMA2_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2)) +#define DMA2_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3)) +#define DMA2_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4)) +#define DMA2_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5)) + +/* DMA2 FLAG mask */ +#define FLAG_Mask ((uint32_t)0x10000000) + +/* DMA registers Masks */ +#define CCR_CLEAR_Mask ((uint32_t)0xFFFF800F) + +/** + * @} + */ + +/** @defgroup DMA_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DMA_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup DMA_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the DMAy Channelx registers to their default reset + * values. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @retval None + */ +void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + + /* Disable the selected DMAy Channelx */ + DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN); + + /* Reset DMAy Channelx control register */ + DMAy_Channelx->CCR = 0; + + /* Reset DMAy Channelx remaining bytes register */ + DMAy_Channelx->CNDTR = 0; + + /* Reset DMAy Channelx peripheral address register */ + DMAy_Channelx->CPAR = 0; + + /* Reset DMAy Channelx memory address register */ + DMAy_Channelx->CMAR = 0; + + if (DMAy_Channelx == DMA1_Channel1) + { + /* Reset interrupt pending bits for DMA1 Channel1 */ + DMA1->IFCR |= DMA1_Channel1_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel2) + { + /* Reset interrupt pending bits for DMA1 Channel2 */ + DMA1->IFCR |= DMA1_Channel2_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel3) + { + /* Reset interrupt pending bits for DMA1 Channel3 */ + DMA1->IFCR |= DMA1_Channel3_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel4) + { + /* Reset interrupt pending bits for DMA1 Channel4 */ + DMA1->IFCR |= DMA1_Channel4_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel5) + { + /* Reset interrupt pending bits for DMA1 Channel5 */ + DMA1->IFCR |= DMA1_Channel5_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel6) + { + /* Reset interrupt pending bits for DMA1 Channel6 */ + DMA1->IFCR |= DMA1_Channel6_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel7) + { + /* Reset interrupt pending bits for DMA1 Channel7 */ + DMA1->IFCR |= DMA1_Channel7_IT_Mask; + } + else if (DMAy_Channelx == DMA2_Channel1) + { + /* Reset interrupt pending bits for DMA2 Channel1 */ + DMA2->IFCR |= DMA2_Channel1_IT_Mask; + } + else if (DMAy_Channelx == DMA2_Channel2) + { + /* Reset interrupt pending bits for DMA2 Channel2 */ + DMA2->IFCR |= DMA2_Channel2_IT_Mask; + } + else if (DMAy_Channelx == DMA2_Channel3) + { + /* Reset interrupt pending bits for DMA2 Channel3 */ + DMA2->IFCR |= DMA2_Channel3_IT_Mask; + } + else if (DMAy_Channelx == DMA2_Channel4) + { + /* Reset interrupt pending bits for DMA2 Channel4 */ + DMA2->IFCR |= DMA2_Channel4_IT_Mask; + } + else + { + if (DMAy_Channelx == DMA2_Channel5) + { + /* Reset interrupt pending bits for DMA2 Channel5 */ + DMA2->IFCR |= DMA2_Channel5_IT_Mask; + } + } +} + +/** + * @brief Initializes the DMAy Channelx according to the specified + * parameters in the DMA_InitStruct. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that + * contains the configuration information for the specified DMA Channel. + * @retval None + */ +void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR)); + assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize)); + assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode)); + assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority)); + assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M)); + +/*--------------------------- DMAy Channelx CCR Configuration -----------------*/ + /* Get the DMAy_Channelx CCR value */ + tmpreg = DMAy_Channelx->CCR; + /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */ + tmpreg &= CCR_CLEAR_Mask; + /* Configure DMAy Channelx: data transfer, data size, priority level and mode */ + /* Set DIR bit according to DMA_DIR value */ + /* Set CIRC bit according to DMA_Mode value */ + /* Set PINC bit according to DMA_PeripheralInc value */ + /* Set MINC bit according to DMA_MemoryInc value */ + /* Set PSIZE bits according to DMA_PeripheralDataSize value */ + /* Set MSIZE bits according to DMA_MemoryDataSize value */ + /* Set PL bits according to DMA_Priority value */ + /* Set the MEM2MEM bit according to DMA_M2M value */ + tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode | + DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc | + DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize | + DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M; + + /* Write to DMAy Channelx CCR */ + DMAy_Channelx->CCR = tmpreg; + +/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/ + /* Write to DMAy Channelx CNDTR */ + DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize; + +/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/ + /* Write to DMAy Channelx CPAR */ + DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr; + +/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/ + /* Write to DMAy Channelx CMAR */ + DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr; +} + +/** + * @brief Fills each DMA_InitStruct member with its default value. + * @param DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct) +{ +/*-------------- Reset DMA init structure parameters values ------------------*/ + /* Initialize the DMA_PeripheralBaseAddr member */ + DMA_InitStruct->DMA_PeripheralBaseAddr = 0; + /* Initialize the DMA_MemoryBaseAddr member */ + DMA_InitStruct->DMA_MemoryBaseAddr = 0; + /* Initialize the DMA_DIR member */ + DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC; + /* Initialize the DMA_BufferSize member */ + DMA_InitStruct->DMA_BufferSize = 0; + /* Initialize the DMA_PeripheralInc member */ + DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable; + /* Initialize the DMA_MemoryInc member */ + DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable; + /* Initialize the DMA_PeripheralDataSize member */ + DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; + /* Initialize the DMA_MemoryDataSize member */ + DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; + /* Initialize the DMA_Mode member */ + DMA_InitStruct->DMA_Mode = DMA_Mode_Normal; + /* Initialize the DMA_Priority member */ + DMA_InitStruct->DMA_Priority = DMA_Priority_Low; + /* Initialize the DMA_M2M member */ + DMA_InitStruct->DMA_M2M = DMA_M2M_Disable; +} + +/** + * @brief Enables or disables the specified DMAy Channelx. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @param NewState: new state of the DMAy Channelx. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected DMAy Channelx */ + DMAy_Channelx->CCR |= DMA_CCR1_EN; + } + else + { + /* Disable the selected DMAy Channelx */ + DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN); + } +} + +/** + * @brief Enables or disables the specified DMAy Channelx interrupts. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @param DMA_IT: specifies the DMA interrupts sources to be enabled + * or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @param NewState: new state of the specified DMA interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + assert_param(IS_DMA_CONFIG_IT(DMA_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected DMA interrupts */ + DMAy_Channelx->CCR |= DMA_IT; + } + else + { + /* Disable the selected DMA interrupts */ + DMAy_Channelx->CCR &= ~DMA_IT; + } +} + +/** + * @brief Sets the number of data units in the current DMAy Channelx transfer. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @param DataNumber: The number of data units in the current DMAy Channelx + * transfer. + * @note This function can only be used when the DMAy_Channelx is disabled. + * @retval None. + */ +void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + +/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/ + /* Write to DMAy Channelx CNDTR */ + DMAy_Channelx->CNDTR = DataNumber; +} + +/** + * @brief Returns the number of remaining data units in the current + * DMAy Channelx transfer. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @retval The number of remaining data units in the current DMAy Channelx + * transfer. + */ +uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + /* Return the number of remaining data units for DMAy Channelx */ + return ((uint16_t)(DMAy_Channelx->CNDTR)); +} + +/** + * @brief Checks whether the specified DMAy Channelx flag is set or not. + * @param DMAy_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag. + * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. + * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. + * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. + * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag. + * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. + * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. + * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. + * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag. + * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. + * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. + * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. + * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag. + * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. + * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. + * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. + * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag. + * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. + * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. + * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. + * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag. + * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. + * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. + * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. + * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag. + * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. + * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. + * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. + * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag. + * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. + * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. + * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. + * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag. + * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. + * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. + * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. + * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag. + * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. + * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. + * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. + * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag. + * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. + * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. + * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. + * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag. + * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. + * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. + * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. + * @retval The new state of DMAy_FLAG (SET or RESET). + */ +FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_GET_FLAG(DMAy_FLAG)); + + /* Calculate the used DMAy */ + if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET) + { + /* Get DMA2 ISR register value */ + tmpreg = DMA2->ISR ; + } + else + { + /* Get DMA1 ISR register value */ + tmpreg = DMA1->ISR ; + } + + /* Check the status of the specified DMAy flag */ + if ((tmpreg & DMAy_FLAG) != (uint32_t)RESET) + { + /* DMAy_FLAG is set */ + bitstatus = SET; + } + else + { + /* DMAy_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the DMAy_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the DMAy Channelx's pending flags. + * @param DMAy_FLAG: specifies the flag to clear. + * This parameter can be any combination (for the same DMA) of the following values: + * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag. + * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. + * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. + * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. + * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag. + * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. + * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. + * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. + * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag. + * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. + * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. + * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. + * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag. + * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. + * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. + * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. + * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag. + * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. + * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. + * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. + * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag. + * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. + * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. + * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. + * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag. + * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. + * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. + * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. + * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag. + * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. + * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. + * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. + * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag. + * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. + * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. + * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. + * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag. + * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. + * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. + * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. + * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag. + * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. + * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. + * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. + * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag. + * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. + * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. + * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. + * @retval None + */ +void DMA_ClearFlag(uint32_t DMAy_FLAG) +{ + /* Check the parameters */ + assert_param(IS_DMA_CLEAR_FLAG(DMAy_FLAG)); + + /* Calculate the used DMAy */ + if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET) + { + /* Clear the selected DMAy flags */ + DMA2->IFCR = DMAy_FLAG; + } + else + { + /* Clear the selected DMAy flags */ + DMA1->IFCR = DMAy_FLAG; + } +} + +/** + * @brief Checks whether the specified DMAy Channelx interrupt has occurred or not. + * @param DMAy_IT: specifies the DMAy interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt. + * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. + * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. + * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. + * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt. + * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. + * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. + * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. + * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt. + * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. + * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. + * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. + * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt. + * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. + * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. + * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. + * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt. + * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. + * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. + * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. + * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt. + * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. + * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. + * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. + * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt. + * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. + * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. + * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. + * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt. + * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. + * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. + * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. + * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt. + * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. + * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. + * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. + * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt. + * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. + * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. + * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. + * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt. + * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. + * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. + * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. + * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt. + * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. + * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. + * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. + * @retval The new state of DMAy_IT (SET or RESET). + */ +ITStatus DMA_GetITStatus(uint32_t DMAy_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_GET_IT(DMAy_IT)); + + /* Calculate the used DMA */ + if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET) + { + /* Get DMA2 ISR register value */ + tmpreg = DMA2->ISR; + } + else + { + /* Get DMA1 ISR register value */ + tmpreg = DMA1->ISR; + } + + /* Check the status of the specified DMAy interrupt */ + if ((tmpreg & DMAy_IT) != (uint32_t)RESET) + { + /* DMAy_IT is set */ + bitstatus = SET; + } + else + { + /* DMAy_IT is reset */ + bitstatus = RESET; + } + /* Return the DMA_IT status */ + return bitstatus; +} + +/** + * @brief Clears the DMAy Channelx's interrupt pending bits. + * @param DMAy_IT: specifies the DMAy interrupt pending bit to clear. + * This parameter can be any combination (for the same DMA) of the following values: + * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt. + * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. + * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. + * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. + * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt. + * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. + * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. + * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. + * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt. + * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. + * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. + * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. + * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt. + * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. + * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. + * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. + * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt. + * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. + * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. + * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. + * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt. + * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. + * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. + * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. + * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt. + * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. + * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. + * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. + * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt. + * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. + * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. + * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. + * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt. + * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. + * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. + * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. + * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt. + * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. + * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. + * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. + * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt. + * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. + * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. + * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. + * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt. + * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. + * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. + * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. + * @retval None + */ +void DMA_ClearITPendingBit(uint32_t DMAy_IT) +{ + /* Check the parameters */ + assert_param(IS_DMA_CLEAR_IT(DMAy_IT)); + + /* Calculate the used DMAy */ + if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET) + { + /* Clear the selected DMAy interrupt pending bits */ + DMA2->IFCR = DMAy_IT; + } + else + { + /* Clear the selected DMAy interrupt pending bits */ + DMA1->IFCR = DMAy_IT; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_exti.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_exti.c new file mode 100644 index 0000000..b6290d5 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_exti.c @@ -0,0 +1,269 @@ +/** + ****************************************************************************** + * @file stm32f10x_exti.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the EXTI firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_exti.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup EXTI + * @brief EXTI driver modules + * @{ + */ + +/** @defgroup EXTI_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_Defines + * @{ + */ + +#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the EXTI peripheral registers to their default reset values. + * @param None + * @retval None + */ +void EXTI_DeInit(void) +{ + EXTI->IMR = 0x00000000; + EXTI->EMR = 0x00000000; + EXTI->RTSR = 0x00000000; + EXTI->FTSR = 0x00000000; + EXTI->PR = 0x000FFFFF; +} + +/** + * @brief Initializes the EXTI peripheral according to the specified + * parameters in the EXTI_InitStruct. + * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure + * that contains the configuration information for the EXTI peripheral. + * @retval None + */ +void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct) +{ + uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode)); + assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger)); + assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line)); + assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd)); + + tmp = (uint32_t)EXTI_BASE; + + if (EXTI_InitStruct->EXTI_LineCmd != DISABLE) + { + /* Clear EXTI line configuration */ + EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line; + EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line; + + tmp += EXTI_InitStruct->EXTI_Mode; + + *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; + + /* Clear Rising Falling edge configuration */ + EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line; + EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line; + + /* Select the trigger for the selected external interrupts */ + if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) + { + /* Rising Falling edge */ + EXTI->RTSR |= EXTI_InitStruct->EXTI_Line; + EXTI->FTSR |= EXTI_InitStruct->EXTI_Line; + } + else + { + tmp = (uint32_t)EXTI_BASE; + tmp += EXTI_InitStruct->EXTI_Trigger; + + *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; + } + } + else + { + tmp += EXTI_InitStruct->EXTI_Mode; + + /* Disable the selected external lines */ + *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line; + } +} + +/** + * @brief Fills each EXTI_InitStruct member with its reset value. + * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct) +{ + EXTI_InitStruct->EXTI_Line = EXTI_LINENONE; + EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt; + EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling; + EXTI_InitStruct->EXTI_LineCmd = DISABLE; +} + +/** + * @brief Generates a Software interrupt. + * @param EXTI_Line: specifies the EXTI lines to be enabled or disabled. + * This parameter can be any combination of EXTI_Linex where x can be (0..19). + * @retval None + */ +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->SWIER |= EXTI_Line; +} + +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param EXTI_Line: specifies the EXTI line flag to check. + * This parameter can be: + * @arg EXTI_Linex: External interrupt line x where x(0..19) + * @retval The new state of EXTI_Line (SET or RESET). + */ +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_GET_EXTI_LINE(EXTI_Line)); + + if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the EXTI's line pending flags. + * @param EXTI_Line: specifies the EXTI lines flags to clear. + * This parameter can be any combination of EXTI_Linex where x can be (0..19). + * @retval None + */ +void EXTI_ClearFlag(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->PR = EXTI_Line; +} + +/** + * @brief Checks whether the specified EXTI line is asserted or not. + * @param EXTI_Line: specifies the EXTI line to check. + * This parameter can be: + * @arg EXTI_Linex: External interrupt line x where x(0..19) + * @retval The new state of EXTI_Line (SET or RESET). + */ +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + /* Check the parameters */ + assert_param(IS_GET_EXTI_LINE(EXTI_Line)); + + enablestatus = EXTI->IMR & EXTI_Line; + if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the EXTI's line pending bits. + * @param EXTI_Line: specifies the EXTI lines to clear. + * This parameter can be any combination of EXTI_Linex where x can be (0..19). + * @retval None + */ +void EXTI_ClearITPendingBit(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->PR = EXTI_Line; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_flash.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_flash.c new file mode 100644 index 0000000..cdff9e9 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_flash.c @@ -0,0 +1,1684 @@ +/** + ****************************************************************************** + * @file stm32f10x_flash.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the FLASH firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_flash.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup FLASH + * @brief FLASH driver modules + * @{ + */ + +/** @defgroup FLASH_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_Defines + * @{ + */ + +/* Flash Access Control Register bits */ +#define ACR_LATENCY_Mask ((uint32_t)0x00000038) +#define ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7) +#define ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF) + +/* Flash Access Control Register bits */ +#define ACR_PRFTBS_Mask ((uint32_t)0x00000020) + +/* Flash Control Register bits */ +#define CR_PG_Set ((uint32_t)0x00000001) +#define CR_PG_Reset ((uint32_t)0x00001FFE) +#define CR_PER_Set ((uint32_t)0x00000002) +#define CR_PER_Reset ((uint32_t)0x00001FFD) +#define CR_MER_Set ((uint32_t)0x00000004) +#define CR_MER_Reset ((uint32_t)0x00001FFB) +#define CR_OPTPG_Set ((uint32_t)0x00000010) +#define CR_OPTPG_Reset ((uint32_t)0x00001FEF) +#define CR_OPTER_Set ((uint32_t)0x00000020) +#define CR_OPTER_Reset ((uint32_t)0x00001FDF) +#define CR_STRT_Set ((uint32_t)0x00000040) +#define CR_LOCK_Set ((uint32_t)0x00000080) + +/* FLASH Mask */ +#define RDPRT_Mask ((uint32_t)0x00000002) +#define WRP0_Mask ((uint32_t)0x000000FF) +#define WRP1_Mask ((uint32_t)0x0000FF00) +#define WRP2_Mask ((uint32_t)0x00FF0000) +#define WRP3_Mask ((uint32_t)0xFF000000) +#define OB_USER_BFB2 ((uint16_t)0x0008) + +/* FLASH Keys */ +#define RDP_Key ((uint16_t)0x00A5) +#define FLASH_KEY1 ((uint32_t)0x45670123) +#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) + +/* FLASH BANK address */ +#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF) + +/* Delay definition */ +#define EraseTimeout ((uint32_t)0x000B0000) +#define ProgramTimeout ((uint32_t)0x00002000) +/** + * @} + */ + +/** @defgroup FLASH_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_Functions + * @{ + */ + +/** +@code + + This driver provides functions to configure and program the Flash memory of all STM32F10x devices, + including the latest STM32F10x_XL density devices. + + STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability: + - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each) + - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each) + While other STM32F10x devices features only one bank with memory up to 512 Kbytes. + + In version V3.3.0, some functions were updated and new ones were added to support + STM32F10x_XL devices. Thus some functions manages all devices, while other are + dedicated for XL devices only. + + The table below presents the list of available functions depending on the used STM32F10x devices. + + *************************************************** + * Legacy functions used for all STM32F10x devices * + *************************************************** + +----------------------------------------------------------------------------------------------------------------------------------+ + | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | + | | devices | devices | | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_SetLatency | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_HalfCycleAccessCmd | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_PrefetchBufferCmd | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_Unlock | Yes | Yes | - For STM32F10X_XL devices: unlock Bank1 and Bank2. | + | | | | - For other devices: unlock Bank1 and it is equivalent | + | | | | to FLASH_UnlockBank1 function. | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_Lock | Yes | Yes | - For STM32F10X_XL devices: lock Bank1 and Bank2. | + | | | | - For other devices: lock Bank1 and it is equivalent | + | | | | to FLASH_LockBank1 function. | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ErasePage | Yes | Yes | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2 | + | | | | - For other devices: erase a page in Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_EraseAllPages | Yes | Yes | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 | + | | | | - For other devices: erase all pages in Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_EraseOptionBytes | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ProgramWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ProgramHalfWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ProgramOptionByteData | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_EnableWriteProtection | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ReadOutProtection | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_UserOptionByteConfig | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetUserOptionByte | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetWriteProtectionOptionByte | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetReadOutProtectionStatus | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetPrefetchBufferStatus | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ITConfig | Yes | Yes | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts| + | | | | - For other devices: enable Bank1's interrupts | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetFlagStatus | Yes | Yes | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status| + | | | | - For other devices: return Bank1's flag status | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ClearFlag | Yes | Yes | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag | + | | | | - For other devices: clear Bank1's flag | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetStatus | Yes | Yes | - Return the status of Bank1 (for all devices) | + | | | | equivalent to FLASH_GetBank1Status function | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_WaitForLastOperation | Yes | Yes | - Wait for Bank1 last operation (for all devices) | + | | | | equivalent to: FLASH_WaitForLastBank1Operation function | + +----------------------------------------------------------------------------------------------------------------------------------+ + + ************************************************************************************************************************ + * New functions used for all STM32F10x devices to manage Bank1: * + * - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 * + * - For other devices, these functions are optional (covered by functions listed above) * + ************************************************************************************************************************ + +----------------------------------------------------------------------------------------------------------------------------------+ + | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | + | | devices | devices | | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_UnlockBank1 | Yes | Yes | - Unlock Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_LockBank1 | Yes | Yes | - Lock Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_EraseAllBank1Pages | Yes | Yes | - Erase all pages in Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_GetBank1Status | Yes | Yes | - Return the status of Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_WaitForLastBank1Operation | Yes | Yes | - Wait for Bank1 last operation | + +----------------------------------------------------------------------------------------------------------------------------------+ + + ***************************************************************************** + * New Functions used only with STM32F10x_XL density devices to manage Bank2 * + ***************************************************************************** + +----------------------------------------------------------------------------------------------------------------------------------+ + | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | + | | devices | devices | | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_UnlockBank2 | Yes | No | - Unlock Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_LockBank2 | Yes | No | - Lock Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_EraseAllBank2Pages | Yes | No | - Erase all pages in Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_GetBank2Status | Yes | No | - Return the status of Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_WaitForLastBank2Operation | Yes | No | - Wait for Bank2 last operation | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_BootConfig | Yes | No | - Configure to boot from Bank1 or Bank2 | + +----------------------------------------------------------------------------------------------------------------------------------+ +@endcode +*/ + + +/** + * @brief Sets the code latency value. + * @note This function can be used for all STM32F10x devices. + * @param FLASH_Latency: specifies the FLASH Latency value. + * This parameter can be one of the following values: + * @arg FLASH_Latency_0: FLASH Zero Latency cycle + * @arg FLASH_Latency_1: FLASH One Latency cycle + * @arg FLASH_Latency_2: FLASH Two Latency cycles + * @retval None + */ +void FLASH_SetLatency(uint32_t FLASH_Latency) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_FLASH_LATENCY(FLASH_Latency)); + + /* Read the ACR register */ + tmpreg = FLASH->ACR; + + /* Sets the Latency value */ + tmpreg &= ACR_LATENCY_Mask; + tmpreg |= FLASH_Latency; + + /* Write the ACR register */ + FLASH->ACR = tmpreg; +} + +/** + * @brief Enables or disables the Half cycle flash access. + * @note This function can be used for all STM32F10x devices. + * @param FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode. + * This parameter can be one of the following values: + * @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable + * @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable + * @retval None + */ +void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess) +{ + /* Check the parameters */ + assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess)); + + /* Enable or disable the Half cycle access */ + FLASH->ACR &= ACR_HLFCYA_Mask; + FLASH->ACR |= FLASH_HalfCycleAccess; +} + +/** + * @brief Enables or disables the Prefetch Buffer. + * @note This function can be used for all STM32F10x devices. + * @param FLASH_PrefetchBuffer: specifies the Prefetch buffer status. + * This parameter can be one of the following values: + * @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable + * @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable + * @retval None + */ +void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer) +{ + /* Check the parameters */ + assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer)); + + /* Enable or disable the Prefetch Buffer */ + FLASH->ACR &= ACR_PRFTBE_Mask; + FLASH->ACR |= FLASH_PrefetchBuffer; +} + +/** + * @brief Unlocks the FLASH Program Erase Controller. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function unlocks Bank1 and Bank2. + * - For all other devices it unlocks Bank1 and it is equivalent + * to FLASH_UnlockBank1 function.. + * @param None + * @retval None + */ +void FLASH_Unlock(void) +{ + /* Authorize the FPEC of Bank1 Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; + +#ifdef STM32F10X_XL + /* Authorize the FPEC of Bank2 Access */ + FLASH->KEYR2 = FLASH_KEY1; + FLASH->KEYR2 = FLASH_KEY2; +#endif /* STM32F10X_XL */ +} +/** + * @brief Unlocks the FLASH Bank1 Program Erase Controller. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function unlocks Bank1. + * - For all other devices it unlocks Bank1 and it is + * equivalent to FLASH_Unlock function. + * @param None + * @retval None + */ +void FLASH_UnlockBank1(void) +{ + /* Authorize the FPEC of Bank1 Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; +} + +#ifdef STM32F10X_XL +/** + * @brief Unlocks the FLASH Bank2 Program Erase Controller. + * @note This function can be used only for STM32F10X_XL density devices. + * @param None + * @retval None + */ +void FLASH_UnlockBank2(void) +{ + /* Authorize the FPEC of Bank2 Access */ + FLASH->KEYR2 = FLASH_KEY1; + FLASH->KEYR2 = FLASH_KEY2; + +} +#endif /* STM32F10X_XL */ + +/** + * @brief Locks the FLASH Program Erase Controller. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function Locks Bank1 and Bank2. + * - For all other devices it Locks Bank1 and it is equivalent + * to FLASH_LockBank1 function. + * @param None + * @retval None + */ +void FLASH_Lock(void) +{ + /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */ + FLASH->CR |= CR_LOCK_Set; + +#ifdef STM32F10X_XL + /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */ + FLASH->CR2 |= CR_LOCK_Set; +#endif /* STM32F10X_XL */ +} + +/** + * @brief Locks the FLASH Bank1 Program Erase Controller. + * @note this function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function Locks Bank1. + * - For all other devices it Locks Bank1 and it is equivalent + * to FLASH_Lock function. + * @param None + * @retval None + */ +void FLASH_LockBank1(void) +{ + /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */ + FLASH->CR |= CR_LOCK_Set; +} + +#ifdef STM32F10X_XL +/** + * @brief Locks the FLASH Bank2 Program Erase Controller. + * @note This function can be used only for STM32F10X_XL density devices. + * @param None + * @retval None + */ +void FLASH_LockBank2(void) +{ + /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */ + FLASH->CR2 |= CR_LOCK_Set; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Erases a specified FLASH page. + * @note This function can be used for all STM32F10x devices. + * @param Page_Address: The page address to be erased. + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ErasePage(uint32_t Page_Address) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Page_Address)); + +#ifdef STM32F10X_XL + if(Page_Address < FLASH_BANK1_END_ADDRESS) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR|= CR_PER_Set; + FLASH->AR = Page_Address; + FLASH->CR|= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + /* Disable the PER Bit */ + FLASH->CR &= CR_PER_Reset; + } + } + else + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR2|= CR_PER_Set; + FLASH->AR2 = Page_Address; + FLASH->CR2|= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + /* Disable the PER Bit */ + FLASH->CR2 &= CR_PER_Reset; + } + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR|= CR_PER_Set; + FLASH->AR = Page_Address; + FLASH->CR|= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + /* Disable the PER Bit */ + FLASH->CR &= CR_PER_Reset; + } +#endif /* STM32F10X_XL */ + + /* Return the Erase Status */ + return status; +} + +/** + * @brief Erases all FLASH pages. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllPages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + +#ifdef STM32F10X_XL + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= CR_MER_Set; + FLASH->CR |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR &= CR_MER_Reset; + } + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR2 |= CR_MER_Set; + FLASH->CR2 |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR2 &= CR_MER_Reset; + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= CR_MER_Set; + FLASH->CR |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR &= CR_MER_Reset; + } +#endif /* STM32F10X_XL */ + + /* Return the Erase Status */ + return status; +} + +/** + * @brief Erases all Bank1 FLASH pages. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function erases all Bank1 pages. + * - For all other devices it erases all Bank1 pages and it is equivalent + * to FLASH_EraseAllPages function. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllBank1Pages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= CR_MER_Set; + FLASH->CR |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR &= CR_MER_Reset; + } + /* Return the Erase Status */ + return status; +} + +#ifdef STM32F10X_XL +/** + * @brief Erases all Bank2 FLASH pages. + * @note This function can be used only for STM32F10x_XL density devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllBank2Pages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR2 |= CR_MER_Set; + FLASH->CR2 |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR2 &= CR_MER_Reset; + } + /* Return the Erase Status */ + return status; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Erases the FLASH option bytes. + * @note This functions erases all option bytes except the Read protection (RDP). + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseOptionBytes(void) +{ + uint16_t rdptmp = RDP_Key; + + FLASH_Status status = FLASH_COMPLETE; + + /* Get the actual read protection Option Byte value */ + if(FLASH_GetReadOutProtectionStatus() != RESET) + { + rdptmp = 0x00; + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + + /* if the previous operation is completed, proceed to erase the option bytes */ + FLASH->CR |= CR_OPTER_Set; + FLASH->CR |= CR_STRT_Set; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the erase operation is completed, disable the OPTER Bit */ + FLASH->CR &= CR_OPTER_Reset; + + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + /* Restore the last read protection Option Byte value */ + OB->RDP = (uint16_t)rdptmp; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + else + { + if (status != FLASH_TIMEOUT) + { + /* Disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + } + /* Return the erase status */ + return status; +} + +/** + * @brief Programs a word at a specified address. + * @note This function can be used for all STM32F10x devices. + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + +#ifdef STM32F10X_XL + if(Address < FLASH_BANK1_END_ADDRESS - 2) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + } + } + else if(Address == (FLASH_BANK1_END_ADDRESS - 1)) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + FLASH->CR2 |= CR_PG_Set; + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + } + else + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR2 |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + } + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + } +#endif /* STM32F10X_XL */ + + /* Return the Program Status */ + return status; +} + +/** + * @brief Programs a half word at a specified address. + * @note This function can be used for all STM32F10x devices. + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + +#ifdef STM32F10X_XL + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(Address < FLASH_BANK1_END_ADDRESS) + { + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + } + else + { + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR2 |= CR_PG_Set; + + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } +#endif /* STM32F10X_XL */ + + /* Return the Program Status */ + return status; +} + +/** + * @brief Programs a half word at a specified Option Byte Data address. + * @note This function can be used for all STM32F10x devices. + * @param Address: specifies the address to be programmed. + * This parameter can be 0x1FFFF804 or 0x1FFFF806. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_OB_DATA_ADDRESS(Address)); + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + /* Enables the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + *(__IO uint16_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the Option Byte Data Program Status */ + return status; +} + +/** + * @brief Write protects the desired pages + * @note This function can be used for all STM32F10x devices. + * @param FLASH_Pages: specifies the address of the pages to be write protected. + * This parameter can be: + * @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31 + * @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3 + * and FLASH_WRProt_Pages124to127 + * @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and + * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255 + * @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and + * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127 + * @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and + * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511 + * @arg FLASH_WRProt_AllPages + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages) +{ + uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF; + + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages)); + + FLASH_Pages = (uint32_t)(~FLASH_Pages); + WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask); + WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8); + WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16); + WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Authorizes the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + FLASH->CR |= CR_OPTPG_Set; + if(WRP0_Data != 0xFF) + { + OB->WRP0 = WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF)) + { + OB->WRP1 = WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF)) + { + OB->WRP2 = WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + + if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF)) + { + OB->WRP3 = WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the write protection operation Status */ + return status; +} + +/** + * @brief Enables or disables the read out protection. + * @note If the user has already programmed the other option bytes before calling + * this function, he must re-program them since this function erases all option bytes. + * @note This function can be used for all STM32F10x devices. + * @param Newstate: new state of the ReadOut Protection. + * This parameter can be: ENABLE or DISABLE. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* Authorizes the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + FLASH->CR |= CR_OPTER_Set; + FLASH->CR |= CR_STRT_Set; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the erase operation is completed, disable the OPTER Bit */ + FLASH->CR &= CR_OPTER_Reset; + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + if(NewState != DISABLE) + { + OB->RDP = 0x00; + } + else + { + OB->RDP = RDP_Key; + } + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + else + { + if(status != FLASH_TIMEOUT) + { + /* Disable the OPTER Bit */ + FLASH->CR &= CR_OPTER_Reset; + } + } + } + /* Return the protection operation Status */ + return status; +} + +/** + * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. + * @note This function can be used for all STM32F10x devices. + * @param OB_IWDG: Selects the IWDG mode + * This parameter can be one of the following values: + * @arg OB_IWDG_SW: Software IWDG selected + * @arg OB_IWDG_HW: Hardware IWDG selected + * @param OB_STOP: Reset event when entering STOP mode. + * This parameter can be one of the following values: + * @arg OB_STOP_NoRST: No reset generated when entering in STOP + * @arg OB_STOP_RST: Reset generated when entering in STOP + * @param OB_STDBY: Reset event when entering Standby mode. + * This parameter can be one of the following values: + * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY + * @arg OB_STDBY_RST: Reset generated when entering in STANDBY + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); + assert_param(IS_OB_STOP_SOURCE(OB_STOP)); + assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); + + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + + OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8))); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the Option Byte program Status */ + return status; +} + +#ifdef STM32F10X_XL +/** + * @brief Configures to boot from Bank1 or Bank2. + * @note This function can be used only for STM32F10x_XL density devices. + * @param FLASH_BOOT: select the FLASH Bank to boot from. + * This parameter can be one of the following values: + * @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash + * position and this parameter is selected the device will boot from Bank1(Default). + * @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash + * position and this parameter is selected the device will boot from Bank2 or Bank1, + * depending on the activation of the bank. The active banks are checked in + * the following order: Bank2, followed by Bank1. + * The active bank is recognized by the value programmed at the base address + * of the respective bank (corresponding to the initial stack pointer value + * in the interrupt vector table). + * For more information, please refer to AN2606 from www.st.com. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT) +{ + FLASH_Status status = FLASH_COMPLETE; + assert_param(IS_FLASH_BOOT(FLASH_BOOT)); + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + + if(FLASH_BOOT == FLASH_BOOT_Bank1) + { + OB->USER |= OB_USER_BFB2; + } + else + { + OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2)); + } + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the Option Byte program Status */ + return status; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Returns the FLASH User Option Bytes values. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1) + * and RST_STDBY(Bit2). + */ +uint32_t FLASH_GetUserOptionByte(void) +{ + /* Return the User Option Byte */ + return (uint32_t)(FLASH->OBR >> 2); +} + +/** + * @brief Returns the FLASH Write Protection Option Bytes Register value. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval The FLASH Write Protection Option Bytes Register value + */ +uint32_t FLASH_GetWriteProtectionOptionByte(void) +{ + /* Return the Flash write protection Register value */ + return (uint32_t)(FLASH->WRPR); +} + +/** + * @brief Checks whether the FLASH Read Out Protection Status is set or not. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH ReadOut Protection Status(SET or RESET) + */ +FlagStatus FLASH_GetReadOutProtectionStatus(void) +{ + FlagStatus readoutstatus = RESET; + if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET) + { + readoutstatus = SET; + } + else + { + readoutstatus = RESET; + } + return readoutstatus; +} + +/** + * @brief Checks whether the FLASH Prefetch Buffer status is set or not. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH Prefetch Buffer Status (SET or RESET). + */ +FlagStatus FLASH_GetPrefetchBufferStatus(void) +{ + FlagStatus bitstatus = RESET; + + if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */ + return bitstatus; +} + +/** + * @brief Enables or disables the specified FLASH interrupts. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts + for Bank1 and Bank2. + * - For other devices it enables or disables the specified FLASH interrupts for Bank1. + * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg FLASH_IT_ERROR: FLASH Error Interrupt + * @arg FLASH_IT_EOP: FLASH end of operation Interrupt + * @param NewState: new state of the specified Flash interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState) +{ +#ifdef STM32F10X_XL + /* Check the parameters */ + assert_param(IS_FLASH_IT(FLASH_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if((FLASH_IT & 0x80000000) != 0x0) + { + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF); + } + else + { + /* Disable the interrupt sources */ + FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF); + } + } + else + { + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR |= FLASH_IT; + } + else + { + /* Disable the interrupt sources */ + FLASH->CR &= ~(uint32_t)FLASH_IT; + } + } +#else + /* Check the parameters */ + assert_param(IS_FLASH_IT(FLASH_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR |= FLASH_IT; + } + else + { + /* Disable the interrupt sources */ + FLASH->CR &= ~(uint32_t)FLASH_IT; + } +#endif /* STM32F10X_XL */ +} + +/** + * @brief Checks whether the specified FLASH flag is set or not. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices, this function checks whether the specified + * Bank1 or Bank2 flag is set or not. + * - For other devices, it checks whether the specified Bank1 flag is + * set or not. + * @param FLASH_FLAG: specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg FLASH_FLAG_BSY: FLASH Busy flag + * @arg FLASH_FLAG_PGERR: FLASH Program error flag + * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @arg FLASH_FLAG_OPTERR: FLASH Option Byte error flag + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG) +{ + FlagStatus bitstatus = RESET; + +#ifdef STM32F10X_XL + /* Check the parameters */ + assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; + if(FLASH_FLAG == FLASH_FLAG_OPTERR) + { + if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH_FLAG & 0x80000000) != 0x0) + { + if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + } +#else + /* Check the parameters */ + assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; + if(FLASH_FLAG == FLASH_FLAG_OPTERR) + { + if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } +#endif /* STM32F10X_XL */ + + /* Return the new state of FLASH_FLAG (SET or RESET) */ + return bitstatus; +} + +/** + * @brief Clears the FLASH's pending flags. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices, this function clears Bank1 or Bank2s pending flags + * - For other devices, it clears Bank1s pending flags. + * @param FLASH_FLAG: specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_PGERR: FLASH Program error flag + * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @retval None + */ +void FLASH_ClearFlag(uint32_t FLASH_FLAG) +{ +#ifdef STM32F10X_XL + /* Check the parameters */ + assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; + + if((FLASH_FLAG & 0x80000000) != 0x0) + { + /* Clear the flags */ + FLASH->SR2 = FLASH_FLAG; + } + else + { + /* Clear the flags */ + FLASH->SR = FLASH_FLAG; + } + +#else + /* Check the parameters */ + assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; + + /* Clear the flags */ + FLASH->SR = FLASH_FLAG; +#endif /* STM32F10X_XL */ +} + +/** + * @brief Returns the FLASH Status. + * @note This function can be used for all STM32F10x devices, it is equivalent + * to FLASH_GetBank1Status function. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetStatus(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR & FLASH_FLAG_PGERR) != 0) + { + flashstatus = FLASH_ERROR_PG; + } + else + { + if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 ) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + /* Return the Flash Status */ + return flashstatus; +} + +/** + * @brief Returns the FLASH Bank1 Status. + * @note This function can be used for all STM32F10x devices, it is equivalent + * to FLASH_GetStatus function. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetBank1Status(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0) + { + flashstatus = FLASH_ERROR_PG; + } + else + { + if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 ) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + /* Return the Flash Status */ + return flashstatus; +} + +#ifdef STM32F10X_XL +/** + * @brief Returns the FLASH Bank2 Status. + * @note This function can be used for STM32F10x_XL density devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetBank2Status(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0) + { + flashstatus = FLASH_ERROR_PG; + } + else + { + if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 ) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + /* Return the Flash Status */ + return flashstatus; +} +#endif /* STM32F10X_XL */ +/** + * @brief Waits for a Flash operation to complete or a TIMEOUT to occur. + * @note This function can be used for all STM32F10x devices, + * it is equivalent to FLASH_WaitForLastBank1Operation. + * - For STM32F10X_XL devices this function waits for a Bank1 Flash operation + * to complete or a TIMEOUT to occur. + * - For all other devices it waits for a Flash operation to complete + * or a TIMEOUT to occur. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the Flash Status */ + status = FLASH_GetBank1Status(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while((status == FLASH_BUSY) && (Timeout != 0x00)) + { + status = FLASH_GetBank1Status(); + Timeout--; + } + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} + +/** + * @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur. + * @note This function can be used for all STM32F10x devices, + * it is equivalent to FLASH_WaitForLastOperation. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the Flash Status */ + status = FLASH_GetBank1Status(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00)) + { + status = FLASH_GetBank1Status(); + Timeout--; + } + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} + +#ifdef STM32F10X_XL +/** + * @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur. + * @note This function can be used only for STM32F10x_XL density devices. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the Flash Status */ + status = FLASH_GetBank2Status(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00)) + { + status = FLASH_GetBank2Status(); + Timeout--; + } + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} +#endif /* STM32F10X_XL */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_fsmc.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_fsmc.c new file mode 100644 index 0000000..51669ee --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_fsmc.c @@ -0,0 +1,866 @@ +/** + ****************************************************************************** + * @file stm32f10x_fsmc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the FSMC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_fsmc.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup FSMC + * @brief FSMC driver modules + * @{ + */ + +/** @defgroup FSMC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup FSMC_Private_Defines + * @{ + */ + +/* --------------------- FSMC registers bit mask ---------------------------- */ + +/* FSMC BCRx Mask */ +#define BCR_MBKEN_Set ((uint32_t)0x00000001) +#define BCR_MBKEN_Reset ((uint32_t)0x000FFFFE) +#define BCR_FACCEN_Set ((uint32_t)0x00000040) + +/* FSMC PCRx Mask */ +#define PCR_PBKEN_Set ((uint32_t)0x00000004) +#define PCR_PBKEN_Reset ((uint32_t)0x000FFFFB) +#define PCR_ECCEN_Set ((uint32_t)0x00000040) +#define PCR_ECCEN_Reset ((uint32_t)0x000FFFBF) +#define PCR_MemoryType_NAND ((uint32_t)0x00000008) +/** + * @} + */ + +/** @defgroup FSMC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FSMC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup FSMC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup FSMC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the FSMC NOR/SRAM Banks registers to their default + * reset values. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 + * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 + * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 + * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 + * @retval None + */ +void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank) +{ + /* Check the parameter */ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); + + /* FSMC_Bank1_NORSRAM1 */ + if(FSMC_Bank == FSMC_Bank1_NORSRAM1) + { + FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB; + } + /* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */ + else + { + FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2; + } + FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF; + FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF; +} + +/** + * @brief Deinitializes the FSMC NAND Banks registers to their default reset values. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @retval None + */ +void FSMC_NANDDeInit(uint32_t FSMC_Bank) +{ + /* Check the parameter */ + assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + /* Set the FSMC_Bank2 registers to their reset values */ + FSMC_Bank2->PCR2 = 0x00000018; + FSMC_Bank2->SR2 = 0x00000040; + FSMC_Bank2->PMEM2 = 0xFCFCFCFC; + FSMC_Bank2->PATT2 = 0xFCFCFCFC; + } + /* FSMC_Bank3_NAND */ + else + { + /* Set the FSMC_Bank3 registers to their reset values */ + FSMC_Bank3->PCR3 = 0x00000018; + FSMC_Bank3->SR3 = 0x00000040; + FSMC_Bank3->PMEM3 = 0xFCFCFCFC; + FSMC_Bank3->PATT3 = 0xFCFCFCFC; + } +} + +/** + * @brief Deinitializes the FSMC PCCARD Bank registers to their default reset values. + * @param None + * @retval None + */ +void FSMC_PCCARDDeInit(void) +{ + /* Set the FSMC_Bank4 registers to their reset values */ + FSMC_Bank4->PCR4 = 0x00000018; + FSMC_Bank4->SR4 = 0x00000000; + FSMC_Bank4->PMEM4 = 0xFCFCFCFC; + FSMC_Bank4->PATT4 = 0xFCFCFCFC; + FSMC_Bank4->PIO4 = 0xFCFCFCFC; +} + +/** + * @brief Initializes the FSMC NOR/SRAM Banks according to the specified + * parameters in the FSMC_NORSRAMInitStruct. + * @param FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef + * structure that contains the configuration information for + * the FSMC NOR/SRAM specified Banks. + * @retval None + */ +void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank)); + assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux)); + assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType)); + assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth)); + assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode)); + assert_param(IS_FSMC_ASYNWAIT(FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait)); + assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity)); + assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode)); + assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive)); + assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation)); + assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal)); + assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode)); + assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst)); + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration)); + assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode)); + + /* Bank1 NOR/SRAM control register configuration */ + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux | + FSMC_NORSRAMInitStruct->FSMC_MemoryType | + FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth | + FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode | + FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait | + FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity | + FSMC_NORSRAMInitStruct->FSMC_WrapMode | + FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive | + FSMC_NORSRAMInitStruct->FSMC_WriteOperation | + FSMC_NORSRAMInitStruct->FSMC_WaitSignal | + FSMC_NORSRAMInitStruct->FSMC_ExtendedMode | + FSMC_NORSRAMInitStruct->FSMC_WriteBurst; + + if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR) + { + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)BCR_FACCEN_Set; + } + + /* Bank1 NOR/SRAM timing register configuration */ + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) | + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode; + + + /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */ + if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable) + { + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime)); + assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode)); + FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )| + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) | + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode; + } + else + { + FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF; + } +} + +/** + * @brief Initializes the FSMC NAND Banks according to the specified + * parameters in the FSMC_NANDInitStruct. + * @param FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef + * structure that contains the configuration information for the FSMC + * NAND specified Banks. + * @retval None + */ +void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) +{ + uint32_t tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000; + + /* Check the parameters */ + assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank)); + assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature)); + assert_param( IS_FSMC_MEMORY_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth)); + assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC)); + assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize)); + assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime)); + assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime)); + assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); + assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); + + /* Set the tmppcr value according to FSMC_NANDInitStruct parameters */ + tmppcr = (uint32_t)FSMC_NANDInitStruct->FSMC_Waitfeature | + PCR_MemoryType_NAND | + FSMC_NANDInitStruct->FSMC_MemoryDataWidth | + FSMC_NANDInitStruct->FSMC_ECC | + FSMC_NANDInitStruct->FSMC_ECCPageSize | + (FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )| + (FSMC_NANDInitStruct->FSMC_TARSetupTime << 13); + + /* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */ + tmppmem = (uint32_t)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | + (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + /* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */ + tmppatt = (uint32_t)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | + (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND) + { + /* FSMC_Bank2_NAND registers configuration */ + FSMC_Bank2->PCR2 = tmppcr; + FSMC_Bank2->PMEM2 = tmppmem; + FSMC_Bank2->PATT2 = tmppatt; + } + else + { + /* FSMC_Bank3_NAND registers configuration */ + FSMC_Bank3->PCR3 = tmppcr; + FSMC_Bank3->PMEM3 = tmppmem; + FSMC_Bank3->PATT3 = tmppatt; + } +} + +/** + * @brief Initializes the FSMC PCCARD Bank according to the specified + * parameters in the FSMC_PCCARDInitStruct. + * @param FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef + * structure that contains the configuration information for the FSMC + * PCCARD Bank. + * @retval None + */ +void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) +{ + /* Check the parameters */ + assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature)); + assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime)); + assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime)); + + assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); + + assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); + assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime)); + + /* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */ + FSMC_Bank4->PCR4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_Waitfeature | + FSMC_MemoryDataWidth_16b | + (FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) | + (FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13); + + /* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */ + FSMC_Bank4->PMEM4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | + (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + /* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */ + FSMC_Bank4->PATT4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | + (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + /* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */ + FSMC_Bank4->PIO4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime | + (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24); +} + +/** + * @brief Fills each FSMC_NORSRAMInitStruct member with its default value. + * @param FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef + * structure which will be initialized. + * @retval None + */ +void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) +{ + /* Reset NOR/SRAM Init structure parameters values */ + FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1; + FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable; + FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM; + FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; + FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; + FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; + FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable; + FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; +} + +/** + * @brief Fills each FSMC_NANDInitStruct member with its default value. + * @param FSMC_NANDInitStruct: pointer to a FSMC_NANDInitTypeDef + * structure which will be initialized. + * @retval None + */ +void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) +{ + /* Reset NAND Init structure parameters values */ + FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND; + FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; + FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; + FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable; + FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes; + FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0; + FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; +} + +/** + * @brief Fills each FSMC_PCCARDInitStruct member with its default value. + * @param FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef + * structure which will be initialized. + * @retval None + */ +void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) +{ + /* Reset PCCARD Init structure parameters values */ + FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; + FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0; + FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; +} + +/** + * @brief Enables or disables the specified NOR/SRAM Memory Bank. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 + * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 + * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 + * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 + * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */ + FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_Set; + } + else + { + /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */ + FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_Reset; + } +} + +/** + * @brief Enables or disables the specified NAND Memory Bank. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 |= PCR_PBKEN_Set; + } + else + { + FSMC_Bank3->PCR3 |= PCR_PBKEN_Set; + } + } + else + { + /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 &= PCR_PBKEN_Reset; + } + else + { + FSMC_Bank3->PCR3 &= PCR_PBKEN_Reset; + } + } +} + +/** + * @brief Enables or disables the PCCARD Memory Bank. + * @param NewState: new state of the PCCARD Memory Bank. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_PCCARDCmd(FunctionalState NewState) +{ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */ + FSMC_Bank4->PCR4 |= PCR_PBKEN_Set; + } + else + { + /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */ + FSMC_Bank4->PCR4 &= PCR_PBKEN_Reset; + } +} + +/** + * @brief Enables or disables the FSMC NAND ECC feature. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @param NewState: new state of the FSMC NAND ECC feature. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 |= PCR_ECCEN_Set; + } + else + { + FSMC_Bank3->PCR3 |= PCR_ECCEN_Set; + } + } + else + { + /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 &= PCR_ECCEN_Reset; + } + else + { + FSMC_Bank3->PCR3 &= PCR_ECCEN_Reset; + } + } +} + +/** + * @brief Returns the error correction code register value. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @retval The Error Correction Code (ECC) value. + */ +uint32_t FSMC_GetECC(uint32_t FSMC_Bank) +{ + uint32_t eccval = 0x00000000; + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + /* Get the ECCR2 register value */ + eccval = FSMC_Bank2->ECCR2; + } + else + { + /* Get the ECCR3 register value */ + eccval = FSMC_Bank3->ECCR3; + } + /* Return the error correction code value */ + return(eccval); +} + +/** + * @brief Enables or disables the specified FSMC interrupts. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_IT: specifies the FSMC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FSMC_IT_Level: Level edge detection interrupt. + * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. + * @param NewState: new state of the specified FSMC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState) +{ + assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); + assert_param(IS_FSMC_IT(FSMC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected FSMC_Bank2 interrupts */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->SR2 |= FSMC_IT; + } + /* Enable the selected FSMC_Bank3 interrupts */ + else if (FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 |= FSMC_IT; + } + /* Enable the selected FSMC_Bank4 interrupts */ + else + { + FSMC_Bank4->SR4 |= FSMC_IT; + } + } + else + { + /* Disable the selected FSMC_Bank2 interrupts */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + + FSMC_Bank2->SR2 &= (uint32_t)~FSMC_IT; + } + /* Disable the selected FSMC_Bank3 interrupts */ + else if (FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 &= (uint32_t)~FSMC_IT; + } + /* Disable the selected FSMC_Bank4 interrupts */ + else + { + FSMC_Bank4->SR4 &= (uint32_t)~FSMC_IT; + } + } +} + +/** + * @brief Checks whether the specified FSMC flag is set or not. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag. + * @arg FSMC_FLAG_Level: Level detection Flag. + * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag. + * @arg FSMC_FLAG_FEMPT: Fifo empty Flag. + * @retval The new state of FSMC_FLAG (SET or RESET). + */ +FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpsr = 0x00000000; + + /* Check the parameters */ + assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); + assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + tmpsr = FSMC_Bank2->SR2; + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + tmpsr = FSMC_Bank3->SR3; + } + /* FSMC_Bank4_PCCARD*/ + else + { + tmpsr = FSMC_Bank4->SR4; + } + + /* Get the flag status */ + if ((tmpsr & FSMC_FLAG) != (uint16_t)RESET ) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the FSMC's pending flags. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag. + * @arg FSMC_FLAG_Level: Level detection Flag. + * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag. + * @retval None + */ +void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); + assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ; + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->SR2 &= ~FSMC_FLAG; + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 &= ~FSMC_FLAG; + } + /* FSMC_Bank4_PCCARD*/ + else + { + FSMC_Bank4->SR4 &= ~FSMC_FLAG; + } +} + +/** + * @brief Checks whether the specified FSMC interrupt has occurred or not. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_IT: specifies the FSMC interrupt source to check. + * This parameter can be one of the following values: + * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FSMC_IT_Level: Level edge detection interrupt. + * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. + * @retval The new state of FSMC_IT (SET or RESET). + */ +ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpsr = 0x0, itstatus = 0x0, itenable = 0x0; + + /* Check the parameters */ + assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); + assert_param(IS_FSMC_GET_IT(FSMC_IT)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + tmpsr = FSMC_Bank2->SR2; + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + tmpsr = FSMC_Bank3->SR3; + } + /* FSMC_Bank4_PCCARD*/ + else + { + tmpsr = FSMC_Bank4->SR4; + } + + itstatus = tmpsr & FSMC_IT; + + itenable = tmpsr & (FSMC_IT >> 3); + if ((itstatus != (uint32_t)RESET) && (itenable != (uint32_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the FSMC's interrupt pending bits. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FSMC_IT_Level: Level edge detection interrupt. + * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. + * @retval None + */ +void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT) +{ + /* Check the parameters */ + assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); + assert_param(IS_FSMC_IT(FSMC_IT)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3); + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3); + } + /* FSMC_Bank4_PCCARD*/ + else + { + FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3); + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_gpio.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_gpio.c new file mode 100644 index 0000000..4cfba75 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_gpio.c @@ -0,0 +1,658 @@ +/** + ****************************************************************************** + * @file stm32f10x_gpio.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the GPIO firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_gpio.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup GPIO + * @brief GPIO driver modules + * @{ + */ + +/** @defgroup GPIO_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_Defines + * @{ + */ + +/* ------------ RCC registers bit address in the alias region ----------------*/ +#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE) + +/* --- EVENTCR Register -----*/ + +/* Alias word address of EVOE bit */ +#define EVCR_OFFSET (AFIO_OFFSET + 0x00) +#define EVOE_BitNumber ((uint8_t)0x07) +#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4)) + + +/* --- MAPR Register ---*/ +/* Alias word address of MII_RMII_SEL bit */ +#define MAPR_OFFSET (AFIO_OFFSET + 0x04) +#define MII_RMII_SEL_BitNumber ((u8)0x17) +#define MAPR_MII_RMII_SEL_BB (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4)) + + +#define EVCR_PORTPINCONFIG_MASK ((uint16_t)0xFF80) +#define LSB_MASK ((uint16_t)0xFFFF) +#define DBGAFR_POSITION_MASK ((uint32_t)0x000F0000) +#define DBGAFR_SWJCFG_MASK ((uint32_t)0xF0FFFFFF) +#define DBGAFR_LOCATION_MASK ((uint32_t)0x00200000) +#define DBGAFR_NUMBITS_MASK ((uint32_t)0x00100000) +/** + * @} + */ + +/** @defgroup GPIO_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the GPIOx peripheral registers to their default reset values. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @retval None + */ +void GPIO_DeInit(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + if (GPIOx == GPIOA) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE); + } + else if (GPIOx == GPIOB) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE); + } + else if (GPIOx == GPIOC) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE); + } + else if (GPIOx == GPIOD) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE); + } + else if (GPIOx == GPIOE) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE); + } + else if (GPIOx == GPIOF) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE); + } + else + { + if (GPIOx == GPIOG) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE); + } + } +} + +/** + * @brief Deinitializes the Alternate Functions (remap, event control + * and EXTI configuration) registers to their default reset values. + * @param None + * @retval None + */ +void GPIO_AFIODeInit(void) +{ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE); +} + +/** + * @brief Initializes the GPIOx peripheral according to the specified + * parameters in the GPIO_InitStruct. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that + * contains the configuration information for the specified GPIO peripheral. + * @retval None + */ +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct) +{ + uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00; + uint32_t tmpreg = 0x00, pinmask = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode)); + assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin)); + +/*---------------------------- GPIO Mode Configuration -----------------------*/ + currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F); + if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00) + { + /* Check the parameters */ + assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed)); + /* Output mode */ + currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed; + } +/*---------------------------- GPIO CRL Configuration ------------------------*/ + /* Configure the eight low port pins */ + if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00) + { + tmpreg = GPIOx->CRL; + for (pinpos = 0x00; pinpos < 0x08; pinpos++) + { + pos = ((uint32_t)0x01) << pinpos; + /* Get the port pins position */ + currentpin = (GPIO_InitStruct->GPIO_Pin) & pos; + if (currentpin == pos) + { + pos = pinpos << 2; + /* Clear the corresponding low control register bits */ + pinmask = ((uint32_t)0x0F) << pos; + tmpreg &= ~pinmask; + /* Write the mode configuration in the corresponding bits */ + tmpreg |= (currentmode << pos); + /* Reset the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) + { + GPIOx->BRR = (((uint32_t)0x01) << pinpos); + } + else + { + /* Set the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) + { + GPIOx->BSRR = (((uint32_t)0x01) << pinpos); + } + } + } + } + GPIOx->CRL = tmpreg; + } +/*---------------------------- GPIO CRH Configuration ------------------------*/ + /* Configure the eight high port pins */ + if (GPIO_InitStruct->GPIO_Pin > 0x00FF) + { + tmpreg = GPIOx->CRH; + for (pinpos = 0x00; pinpos < 0x08; pinpos++) + { + pos = (((uint32_t)0x01) << (pinpos + 0x08)); + /* Get the port pins position */ + currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos); + if (currentpin == pos) + { + pos = pinpos << 2; + /* Clear the corresponding high control register bits */ + pinmask = ((uint32_t)0x0F) << pos; + tmpreg &= ~pinmask; + /* Write the mode configuration in the corresponding bits */ + tmpreg |= (currentmode << pos); + /* Reset the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) + { + GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08)); + } + /* Set the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) + { + GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08)); + } + } + } + GPIOx->CRH = tmpreg; + } +} + +/** + * @brief Fills each GPIO_InitStruct member with its default value. + * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct) +{ + /* Reset GPIO init structure parameters values */ + GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All; + GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING; +} + +/** + * @brief Reads the specified input port pin. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_Pin_x where x can be (0..15). + * @retval The input port pin value. + */ +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + return bitstatus; +} + +/** + * @brief Reads the specified GPIO input data port. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @retval GPIO input data port value. + */ +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + return ((uint16_t)GPIOx->IDR); +} + +/** + * @brief Reads the specified output data port bit. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_Pin_x where x can be (0..15). + * @retval The output port pin value. + */ +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + return bitstatus; +} + +/** + * @brief Reads the specified GPIO output data port. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @retval GPIO output data port value. + */ +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + return ((uint16_t)GPIOx->ODR); +} + +/** + * @brief Sets the selected data port bits. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bits to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->BSRR = GPIO_Pin; +} + +/** + * @brief Clears the selected data port bits. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bits to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->BRR = GPIO_Pin; +} + +/** + * @brief Sets or clears the selected data port bit. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_Pin_x where x can be (0..15). + * @param BitVal: specifies the value to be written to the selected bit. + * This parameter can be one of the BitAction enum values: + * @arg Bit_RESET: to clear the port pin + * @arg Bit_SET: to set the port pin + * @retval None + */ +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_BIT_ACTION(BitVal)); + + if (BitVal != Bit_RESET) + { + GPIOx->BSRR = GPIO_Pin; + } + else + { + GPIOx->BRR = GPIO_Pin; + } +} + +/** + * @brief Writes data to the specified GPIO data port. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param PortVal: specifies the value to be written to the port output data register. + * @retval None + */ +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + GPIOx->ODR = PortVal; +} + +void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + GPIOx->ODR ^= GPIO_Pin; +} + +/** + * @brief Locks GPIO Pins configuration registers. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint32_t tmp = 0x00010000; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + tmp |= GPIO_Pin; + /* Set LCKK bit */ + GPIOx->LCKR = tmp; + /* Reset LCKK bit */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKK bit */ + GPIOx->LCKR = tmp; + /* Read LCKK bit*/ + tmp = GPIOx->LCKR; + /* Read LCKK bit*/ + tmp = GPIOx->LCKR; +} + +/** + * @brief Selects the GPIO pin used as Event output. + * @param GPIO_PortSource: selects the GPIO port to be used as source + * for Event output. + * This parameter can be GPIO_PortSourceGPIOx where x can be (A..E). + * @param GPIO_PinSource: specifies the pin for the Event output. + * This parameter can be GPIO_PinSourcex where x can be (0..15). + * @retval None + */ +void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) +{ + uint32_t tmpreg = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource)); + assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); + + tmpreg = AFIO->EVCR; + /* Clear the PORT[6:4] and PIN[3:0] bits */ + tmpreg &= EVCR_PORTPINCONFIG_MASK; + tmpreg |= (uint32_t)GPIO_PortSource << 0x04; + tmpreg |= GPIO_PinSource; + AFIO->EVCR = tmpreg; +} + +/** + * @brief Enables or disables the Event Output. + * @param NewState: new state of the Event output. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void GPIO_EventOutputCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState; +} + +/** + * @brief Changes the mapping of the specified pin. + * @param GPIO_Remap: selects the pin to remap. + * This parameter can be one of the following values: + * @arg GPIO_Remap_SPI1 : SPI1 Alternate Function mapping + * @arg GPIO_Remap_I2C1 : I2C1 Alternate Function mapping + * @arg GPIO_Remap_USART1 : USART1 Alternate Function mapping + * @arg GPIO_Remap_USART2 : USART2 Alternate Function mapping + * @arg GPIO_PartialRemap_USART3 : USART3 Partial Alternate Function mapping + * @arg GPIO_FullRemap_USART3 : USART3 Full Alternate Function mapping + * @arg GPIO_PartialRemap_TIM1 : TIM1 Partial Alternate Function mapping + * @arg GPIO_FullRemap_TIM1 : TIM1 Full Alternate Function mapping + * @arg GPIO_PartialRemap1_TIM2 : TIM2 Partial1 Alternate Function mapping + * @arg GPIO_PartialRemap2_TIM2 : TIM2 Partial2 Alternate Function mapping + * @arg GPIO_FullRemap_TIM2 : TIM2 Full Alternate Function mapping + * @arg GPIO_PartialRemap_TIM3 : TIM3 Partial Alternate Function mapping + * @arg GPIO_FullRemap_TIM3 : TIM3 Full Alternate Function mapping + * @arg GPIO_Remap_TIM4 : TIM4 Alternate Function mapping + * @arg GPIO_Remap1_CAN1 : CAN1 Alternate Function mapping + * @arg GPIO_Remap2_CAN1 : CAN1 Alternate Function mapping + * @arg GPIO_Remap_PD01 : PD01 Alternate Function mapping + * @arg GPIO_Remap_TIM5CH4_LSI : LSI connected to TIM5 Channel4 input capture for calibration + * @arg GPIO_Remap_ADC1_ETRGINJ : ADC1 External Trigger Injected Conversion remapping + * @arg GPIO_Remap_ADC1_ETRGREG : ADC1 External Trigger Regular Conversion remapping + * @arg GPIO_Remap_ADC2_ETRGINJ : ADC2 External Trigger Injected Conversion remapping + * @arg GPIO_Remap_ADC2_ETRGREG : ADC2 External Trigger Regular Conversion remapping + * @arg GPIO_Remap_ETH : Ethernet remapping (only for Connectivity line devices) + * @arg GPIO_Remap_CAN2 : CAN2 remapping (only for Connectivity line devices) + * @arg GPIO_Remap_SWJ_NoJTRST : Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST + * @arg GPIO_Remap_SWJ_JTAGDisable : JTAG-DP Disabled and SW-DP Enabled + * @arg GPIO_Remap_SWJ_Disable : Full SWJ Disabled (JTAG-DP + SW-DP) + * @arg GPIO_Remap_SPI3 : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) + * When the SPI3/I2S3 is remapped using this function, the SWJ is configured + * to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST. + * @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected + * to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices) + * If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to + * Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output. + * @arg GPIO_Remap_PTP_PPS : Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) + * @arg GPIO_Remap_TIM15 : TIM15 Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_TIM16 : TIM16 Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_TIM17 : TIM17 Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_CEC : CEC Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_TIM1_DMA : TIM1 DMA requests mapping (only for Value line devices) + * @arg GPIO_Remap_TIM9 : TIM9 Alternate Function mapping (only for XL-density devices) + * @arg GPIO_Remap_TIM10 : TIM10 Alternate Function mapping (only for XL-density devices) + * @arg GPIO_Remap_TIM11 : TIM11 Alternate Function mapping (only for XL-density devices) + * @arg GPIO_Remap_TIM13 : TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) + * @arg GPIO_Remap_TIM14 : TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) + * @arg GPIO_Remap_FSMC_NADV : FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) + * @arg GPIO_Remap_TIM67_DAC_DMA : TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) + * @arg GPIO_Remap_TIM12 : TIM12 Alternate Function mapping (only for High density Value line devices) + * @arg GPIO_Remap_MISC : Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, + * only for High density Value line devices) + * @param NewState: new state of the port pin remapping. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState) +{ + uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_REMAP(GPIO_Remap)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if((GPIO_Remap & 0x80000000) == 0x80000000) + { + tmpreg = AFIO->MAPR2; + } + else + { + tmpreg = AFIO->MAPR; + } + + tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10; + tmp = GPIO_Remap & LSB_MASK; + + if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) + { + tmpreg &= DBGAFR_SWJCFG_MASK; + AFIO->MAPR &= DBGAFR_SWJCFG_MASK; + } + else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK) + { + tmp1 = ((uint32_t)0x03) << tmpmask; + tmpreg &= ~tmp1; + tmpreg |= ~DBGAFR_SWJCFG_MASK; + } + else + { + tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10)); + tmpreg |= ~DBGAFR_SWJCFG_MASK; + } + + if (NewState != DISABLE) + { + tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10)); + } + + if((GPIO_Remap & 0x80000000) == 0x80000000) + { + AFIO->MAPR2 = tmpreg; + } + else + { + AFIO->MAPR = tmpreg; + } +} + +/** + * @brief Selects the GPIO pin used as EXTI Line. + * @param GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines. + * This parameter can be GPIO_PortSourceGPIOx where x can be (A..G). + * @param GPIO_PinSource: specifies the EXTI line to be configured. + * This parameter can be GPIO_PinSourcex where x can be (0..15). + * @retval None + */ +void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) +{ + uint32_t tmp = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource)); + assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); + + tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)); + AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp; + AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03))); +} + +/** + * @brief Selects the Ethernet media interface. + * @note This function applies only to STM32 Connectivity line devices. + * @param GPIO_ETH_MediaInterface: specifies the Media Interface mode. + * This parameter can be one of the following values: + * @arg GPIO_ETH_MediaInterface_MII: MII mode + * @arg GPIO_ETH_MediaInterface_RMII: RMII mode + * @retval None + */ +void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface) +{ + assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface)); + + /* Configure MII_RMII selection bit */ + *(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_i2c.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_i2c.c new file mode 100644 index 0000000..4ea321c --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_i2c.c @@ -0,0 +1,1331 @@ +/** + ****************************************************************************** + * @file stm32f10x_i2c.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the I2C firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_i2c.h" +#include "stm32f10x_rcc.h" + + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup I2C + * @brief I2C driver modules + * @{ + */ + +/** @defgroup I2C_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Private_Defines + * @{ + */ + +/* I2C SPE mask */ +#define CR1_PE_Set ((uint16_t)0x0001) +#define CR1_PE_Reset ((uint16_t)0xFFFE) + +/* I2C START mask */ +#define CR1_START_Set ((uint16_t)0x0100) +#define CR1_START_Reset ((uint16_t)0xFEFF) + +/* I2C STOP mask */ +#define CR1_STOP_Set ((uint16_t)0x0200) +#define CR1_STOP_Reset ((uint16_t)0xFDFF) + +/* I2C ACK mask */ +#define CR1_ACK_Set ((uint16_t)0x0400) +#define CR1_ACK_Reset ((uint16_t)0xFBFF) + +/* I2C ENGC mask */ +#define CR1_ENGC_Set ((uint16_t)0x0040) +#define CR1_ENGC_Reset ((uint16_t)0xFFBF) + +/* I2C SWRST mask */ +#define CR1_SWRST_Set ((uint16_t)0x8000) +#define CR1_SWRST_Reset ((uint16_t)0x7FFF) + +/* I2C PEC mask */ +#define CR1_PEC_Set ((uint16_t)0x1000) +#define CR1_PEC_Reset ((uint16_t)0xEFFF) + +/* I2C ENPEC mask */ +#define CR1_ENPEC_Set ((uint16_t)0x0020) +#define CR1_ENPEC_Reset ((uint16_t)0xFFDF) + +/* I2C ENARP mask */ +#define CR1_ENARP_Set ((uint16_t)0x0010) +#define CR1_ENARP_Reset ((uint16_t)0xFFEF) + +/* I2C NOSTRETCH mask */ +#define CR1_NOSTRETCH_Set ((uint16_t)0x0080) +#define CR1_NOSTRETCH_Reset ((uint16_t)0xFF7F) + +/* I2C registers Masks */ +#define CR1_CLEAR_Mask ((uint16_t)0xFBF5) + +/* I2C DMAEN mask */ +#define CR2_DMAEN_Set ((uint16_t)0x0800) +#define CR2_DMAEN_Reset ((uint16_t)0xF7FF) + +/* I2C LAST mask */ +#define CR2_LAST_Set ((uint16_t)0x1000) +#define CR2_LAST_Reset ((uint16_t)0xEFFF) + +/* I2C FREQ mask */ +#define CR2_FREQ_Reset ((uint16_t)0xFFC0) + +/* I2C ADD0 mask */ +#define OAR1_ADD0_Set ((uint16_t)0x0001) +#define OAR1_ADD0_Reset ((uint16_t)0xFFFE) + +/* I2C ENDUAL mask */ +#define OAR2_ENDUAL_Set ((uint16_t)0x0001) +#define OAR2_ENDUAL_Reset ((uint16_t)0xFFFE) + +/* I2C ADD2 mask */ +#define OAR2_ADD2_Reset ((uint16_t)0xFF01) + +/* I2C F/S mask */ +#define CCR_FS_Set ((uint16_t)0x8000) + +/* I2C CCR mask */ +#define CCR_CCR_Set ((uint16_t)0x0FFF) + +/* I2C FLAG mask */ +#define FLAG_Mask ((uint32_t)0x00FFFFFF) + +/* I2C Interrupt Enable mask */ +#define ITEN_Mask ((uint32_t)0x07000000) + +/** + * @} + */ + +/** @defgroup I2C_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the I2Cx peripheral registers to their default reset values. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval None + */ +void I2C_DeInit(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + if (I2Cx == I2C1) + { + /* Enable I2C1 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE); + /* Release I2C1 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE); + } + else + { + /* Enable I2C2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE); + /* Release I2C2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE); + } +} + +/** + * @brief Initializes the I2Cx peripheral according to the specified + * parameters in the I2C_InitStruct. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_InitStruct: pointer to a I2C_InitTypeDef structure that + * contains the configuration information for the specified I2C peripheral. + * @retval None + */ +void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct) +{ + uint16_t tmpreg = 0, freqrange = 0; + uint16_t result = 0x04; + uint32_t pclk1 = 8000000; + RCC_ClocksTypeDef rcc_clocks; + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLOCK_SPEED(I2C_InitStruct->I2C_ClockSpeed)); + assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode)); + assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle)); + assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1)); + assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack)); + assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress)); + +/*---------------------------- I2Cx CR2 Configuration ------------------------*/ + /* Get the I2Cx CR2 value */ + tmpreg = I2Cx->CR2; + /* Clear frequency FREQ[5:0] bits */ + tmpreg &= CR2_FREQ_Reset; + /* Get pclk1 frequency value */ + RCC_GetClocksFreq(&rcc_clocks); + pclk1 = rcc_clocks.PCLK1_Frequency; + /* Set frequency bits depending on pclk1 value */ + freqrange = (uint16_t)(pclk1 / 1000000); + tmpreg |= freqrange; + /* Write to I2Cx CR2 */ + I2Cx->CR2 = tmpreg; + +/*---------------------------- I2Cx CCR Configuration ------------------------*/ + /* Disable the selected I2C peripheral to configure TRISE */ + I2Cx->CR1 &= CR1_PE_Reset; + /* Reset tmpreg value */ + /* Clear F/S, DUTY and CCR[11:0] bits */ + tmpreg = 0; + + /* Configure speed in standard mode */ + if (I2C_InitStruct->I2C_ClockSpeed <= 100000) + { + /* Standard mode speed calculate */ + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1)); + /* Test if CCR value is under 0x4*/ + if (result < 0x04) + { + /* Set minimum allowed value */ + result = 0x04; + } + /* Set speed value for standard mode */ + tmpreg |= result; + /* Set Maximum Rise Time for standard mode */ + I2Cx->TRISE = freqrange + 1; + } + /* Configure speed in fast mode */ + else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/ + { + if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2) + { + /* Fast mode speed calculate: Tlow/Thigh = 2 */ + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3)); + } + else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/ + { + /* Fast mode speed calculate: Tlow/Thigh = 16/9 */ + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25)); + /* Set DUTY bit */ + result |= I2C_DutyCycle_16_9; + } + + /* Test if CCR value is under 0x1*/ + if ((result & CCR_CCR_Set) == 0) + { + /* Set minimum allowed value */ + result |= (uint16_t)0x0001; + } + /* Set speed value and set F/S bit for fast mode */ + tmpreg |= (uint16_t)(result | CCR_FS_Set); + /* Set Maximum Rise Time for fast mode */ + I2Cx->TRISE = (uint16_t)(((freqrange * (uint16_t)300) / (uint16_t)1000) + (uint16_t)1); + } + + /* Write to I2Cx CCR */ + I2Cx->CCR = tmpreg; + /* Enable the selected I2C peripheral */ + I2Cx->CR1 |= CR1_PE_Set; + +/*---------------------------- I2Cx CR1 Configuration ------------------------*/ + /* Get the I2Cx CR1 value */ + tmpreg = I2Cx->CR1; + /* Clear ACK, SMBTYPE and SMBUS bits */ + tmpreg &= CR1_CLEAR_Mask; + /* Configure I2Cx: mode and acknowledgement */ + /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */ + /* Set ACK bit according to I2C_Ack value */ + tmpreg |= (uint16_t)((uint32_t)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack); + /* Write to I2Cx CR1 */ + I2Cx->CR1 = tmpreg; + +/*---------------------------- I2Cx OAR1 Configuration -----------------------*/ + /* Set I2Cx Own Address1 and acknowledged address */ + I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1); +} + +/** + * @brief Fills each I2C_InitStruct member with its default value. + * @param I2C_InitStruct: pointer to an I2C_InitTypeDef structure which will be initialized. + * @retval None + */ +void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct) +{ +/*---------------- Reset I2C init structure parameters values ----------------*/ + /* initialize the I2C_ClockSpeed member */ + I2C_InitStruct->I2C_ClockSpeed = 5000; + /* Initialize the I2C_Mode member */ + I2C_InitStruct->I2C_Mode = I2C_Mode_I2C; + /* Initialize the I2C_DutyCycle member */ + I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2; + /* Initialize the I2C_OwnAddress1 member */ + I2C_InitStruct->I2C_OwnAddress1 = 0; + /* Initialize the I2C_Ack member */ + I2C_InitStruct->I2C_Ack = I2C_Ack_Disable; + /* Initialize the I2C_AcknowledgedAddress member */ + I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; +} + +/** + * @brief Enables or disables the specified I2C peripheral. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C peripheral */ + I2Cx->CR1 |= CR1_PE_Set; + } + else + { + /* Disable the selected I2C peripheral */ + I2Cx->CR1 &= CR1_PE_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C DMA requests. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C DMA transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C DMA requests */ + I2Cx->CR2 |= CR2_DMAEN_Set; + } + else + { + /* Disable the selected I2C DMA requests */ + I2Cx->CR2 &= CR2_DMAEN_Reset; + } +} + +/** + * @brief Specifies if the next DMA transfer will be the last one. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C DMA last transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Next DMA transfer is the last transfer */ + I2Cx->CR2 |= CR2_LAST_Set; + } + else + { + /* Next DMA transfer is not the last transfer */ + I2Cx->CR2 &= CR2_LAST_Reset; + } +} + +/** + * @brief Generates I2Cx communication START condition. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C START condition generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Generate a START condition */ + I2Cx->CR1 |= CR1_START_Set; + } + else + { + /* Disable the START condition generation */ + I2Cx->CR1 &= CR1_START_Reset; + } +} + +/** + * @brief Generates I2Cx communication STOP condition. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C STOP condition generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Generate a STOP condition */ + I2Cx->CR1 |= CR1_STOP_Set; + } + else + { + /* Disable the STOP condition generation */ + I2Cx->CR1 &= CR1_STOP_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C acknowledge feature. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C Acknowledgement. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the acknowledgement */ + I2Cx->CR1 |= CR1_ACK_Set; + } + else + { + /* Disable the acknowledgement */ + I2Cx->CR1 &= CR1_ACK_Reset; + } +} + +/** + * @brief Configures the specified I2C own address2. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Address: specifies the 7bit I2C own address2. + * @retval None. + */ +void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address) +{ + uint16_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Get the old register value */ + tmpreg = I2Cx->OAR2; + + /* Reset I2Cx Own address2 bit [7:1] */ + tmpreg &= OAR2_ADD2_Reset; + + /* Set I2Cx Own address2 */ + tmpreg |= (uint16_t)((uint16_t)Address & (uint16_t)0x00FE); + + /* Store the new register value */ + I2Cx->OAR2 = tmpreg; +} + +/** + * @brief Enables or disables the specified I2C dual addressing mode. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C dual addressing mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable dual addressing mode */ + I2Cx->OAR2 |= OAR2_ENDUAL_Set; + } + else + { + /* Disable dual addressing mode */ + I2Cx->OAR2 &= OAR2_ENDUAL_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C general call feature. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C General call. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable generall call */ + I2Cx->CR1 |= CR1_ENGC_Set; + } + else + { + /* Disable generall call */ + I2Cx->CR1 &= CR1_ENGC_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C interrupts. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_IT: specifies the I2C interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg I2C_IT_BUF: Buffer interrupt mask + * @arg I2C_IT_EVT: Event interrupt mask + * @arg I2C_IT_ERR: Error interrupt mask + * @param NewState: new state of the specified I2C interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_I2C_CONFIG_IT(I2C_IT)); + + if (NewState != DISABLE) + { + /* Enable the selected I2C interrupts */ + I2Cx->CR2 |= I2C_IT; + } + else + { + /* Disable the selected I2C interrupts */ + I2Cx->CR2 &= (uint16_t)~I2C_IT; + } +} + +/** + * @brief Sends a data byte through the I2Cx peripheral. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Data: Byte to be transmitted.. + * @retval None + */ +void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + /* Write in the DR register the data to be sent */ + I2Cx->DR = Data; +} + +/** + * @brief Returns the most recent received data by the I2Cx peripheral. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval The value of the received data. + */ +uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + /* Return the data in the DR register */ + return (uint8_t)I2Cx->DR; +} + +/** + * @brief Transmits the address byte to select the slave device. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Address: specifies the slave address which will be transmitted + * @param I2C_Direction: specifies whether the I2C device will be a + * Transmitter or a Receiver. This parameter can be one of the following values + * @arg I2C_Direction_Transmitter: Transmitter mode + * @arg I2C_Direction_Receiver: Receiver mode + * @retval None. + */ +void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_DIRECTION(I2C_Direction)); + /* Test on the direction to set/reset the read/write bit */ + if (I2C_Direction != I2C_Direction_Transmitter) + { + /* Set the address bit0 for read */ + Address |= OAR1_ADD0_Set; + } + else + { + /* Reset the address bit0 for write */ + Address &= OAR1_ADD0_Reset; + } + /* Send the address */ + I2Cx->DR = Address; +} + +/** + * @brief Reads the specified I2C register and returns its value. + * @param I2C_Register: specifies the register to read. + * This parameter can be one of the following values: + * @arg I2C_Register_CR1: CR1 register. + * @arg I2C_Register_CR2: CR2 register. + * @arg I2C_Register_OAR1: OAR1 register. + * @arg I2C_Register_OAR2: OAR2 register. + * @arg I2C_Register_DR: DR register. + * @arg I2C_Register_SR1: SR1 register. + * @arg I2C_Register_SR2: SR2 register. + * @arg I2C_Register_CCR: CCR register. + * @arg I2C_Register_TRISE: TRISE register. + * @retval The value of the read register. + */ +uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_REGISTER(I2C_Register)); + + tmp = (uint32_t) I2Cx; + tmp += I2C_Register; + + /* Return the selected register value */ + return (*(__IO uint16_t *) tmp); +} + +/** + * @brief Enables or disables the specified I2C software reset. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C software reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Peripheral under reset */ + I2Cx->CR1 |= CR1_SWRST_Set; + } + else + { + /* Peripheral not under reset */ + I2Cx->CR1 &= CR1_SWRST_Reset; + } +} + +/** + * @brief Selects the specified I2C NACK position in master receiver mode. + * This function is useful in I2C Master Receiver mode when the number + * of data to be received is equal to 2. In this case, this function + * should be called (with parameter I2C_NACKPosition_Next) before data + * reception starts,as described in the 2-byte reception procedure + * recommended in Reference Manual in Section: Master receiver. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_NACKPosition: specifies the NACK position. + * This parameter can be one of the following values: + * @arg I2C_NACKPosition_Next: indicates that the next byte will be the last + * received byte. + * @arg I2C_NACKPosition_Current: indicates that current byte is the last + * received byte. + * + * @note This function configures the same bit (POS) as I2C_PECPositionConfig() + * but is intended to be used in I2C mode while I2C_PECPositionConfig() + * is intended to used in SMBUS mode. + * + * @retval None + */ +void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_NACK_POSITION(I2C_NACKPosition)); + + /* Check the input parameter */ + if (I2C_NACKPosition == I2C_NACKPosition_Next) + { + /* Next byte in shift register is the last received byte */ + I2Cx->CR1 |= I2C_NACKPosition_Next; + } + else + { + /* Current byte in shift register is the last received byte */ + I2Cx->CR1 &= I2C_NACKPosition_Current; + } +} + +/** + * @brief Drives the SMBusAlert pin high or low for the specified I2C. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_SMBusAlert: specifies SMBAlert pin level. + * This parameter can be one of the following values: + * @arg I2C_SMBusAlert_Low: SMBAlert pin driven low + * @arg I2C_SMBusAlert_High: SMBAlert pin driven high + * @retval None + */ +void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert)); + if (I2C_SMBusAlert == I2C_SMBusAlert_Low) + { + /* Drive the SMBusAlert pin Low */ + I2Cx->CR1 |= I2C_SMBusAlert_Low; + } + else + { + /* Drive the SMBusAlert pin High */ + I2Cx->CR1 &= I2C_SMBusAlert_High; + } +} + +/** + * @brief Enables or disables the specified I2C PEC transfer. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C PEC transmission. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C PEC transmission */ + I2Cx->CR1 |= CR1_PEC_Set; + } + else + { + /* Disable the selected I2C PEC transmission */ + I2Cx->CR1 &= CR1_PEC_Reset; + } +} + +/** + * @brief Selects the specified I2C PEC position. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_PECPosition: specifies the PEC position. + * This parameter can be one of the following values: + * @arg I2C_PECPosition_Next: indicates that the next byte is PEC + * @arg I2C_PECPosition_Current: indicates that current byte is PEC + * + * @note This function configures the same bit (POS) as I2C_NACKPositionConfig() + * but is intended to be used in SMBUS mode while I2C_NACKPositionConfig() + * is intended to used in I2C mode. + * + * @retval None + */ +void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition)); + if (I2C_PECPosition == I2C_PECPosition_Next) + { + /* Next byte in shift register is PEC */ + I2Cx->CR1 |= I2C_PECPosition_Next; + } + else + { + /* Current byte in shift register is PEC */ + I2Cx->CR1 &= I2C_PECPosition_Current; + } +} + +/** + * @brief Enables or disables the PEC value calculation of the transferred bytes. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx PEC value calculation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C PEC calculation */ + I2Cx->CR1 |= CR1_ENPEC_Set; + } + else + { + /* Disable the selected I2C PEC calculation */ + I2Cx->CR1 &= CR1_ENPEC_Reset; + } +} + +/** + * @brief Returns the PEC value for the specified I2C. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval The PEC value. + */ +uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + /* Return the selected I2C PEC value */ + return ((I2Cx->SR2) >> 8); +} + +/** + * @brief Enables or disables the specified I2C ARP. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx ARP. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C ARP */ + I2Cx->CR1 |= CR1_ENARP_Set; + } + else + { + /* Disable the selected I2C ARP */ + I2Cx->CR1 &= CR1_ENARP_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C Clock stretching. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx Clock stretching. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState == DISABLE) + { + /* Enable the selected I2C Clock stretching */ + I2Cx->CR1 |= CR1_NOSTRETCH_Set; + } + else + { + /* Disable the selected I2C Clock stretching */ + I2Cx->CR1 &= CR1_NOSTRETCH_Reset; + } +} + +/** + * @brief Selects the specified I2C fast mode duty cycle. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_DutyCycle: specifies the fast mode duty cycle. + * This parameter can be one of the following values: + * @arg I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2 + * @arg I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9 + * @retval None + */ +void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle)); + if (I2C_DutyCycle != I2C_DutyCycle_16_9) + { + /* I2C fast mode Tlow/Thigh=2 */ + I2Cx->CCR &= I2C_DutyCycle_2; + } + else + { + /* I2C fast mode Tlow/Thigh=16/9 */ + I2Cx->CCR |= I2C_DutyCycle_16_9; + } +} + + + +/** + * @brief + **************************************************************************************** + * + * I2C State Monitoring Functions + * + **************************************************************************************** + * This I2C driver provides three different ways for I2C state monitoring + * depending on the application requirements and constraints: + * + * + * 1) Basic state monitoring: + * Using I2C_CheckEvent() function: + * It compares the status registers (SR1 and SR2) content to a given event + * (can be the combination of one or more flags). + * It returns SUCCESS if the current status includes the given flags + * and returns ERROR if one or more flags are missing in the current status. + * - When to use: + * - This function is suitable for most applications as well as for startup + * activity since the events are fully described in the product reference manual + * (RM0008). + * - It is also suitable for users who need to define their own events. + * - Limitations: + * - If an error occurs (ie. error flags are set besides to the monitored flags), + * the I2C_CheckEvent() function may return SUCCESS despite the communication + * hold or corrupted real state. + * In this case, it is advised to use error interrupts to monitor the error + * events and handle them in the interrupt IRQ handler. + * + * @note + * For error management, it is advised to use the following functions: + * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR). + * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs. + * Where x is the peripheral instance (I2C1, I2C2 ...) + * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler() + * in order to determine which error occured. + * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd() + * and/or I2C_GenerateStop() in order to clear the error flag and source, + * and return to correct communication status. + * + * + * 2) Advanced state monitoring: + * Using the function I2C_GetLastEvent() which returns the image of both status + * registers in a single word (uint32_t) (Status Register 2 value is shifted left + * by 16 bits and concatenated to Status Register 1). + * - When to use: + * - This function is suitable for the same applications above but it allows to + * overcome the mentioned limitation of I2C_GetFlagStatus() function. + * The returned value could be compared to events already defined in the + * library (stm32f10x_i2c.h) or to custom values defined by user. + * - This function is suitable when multiple flags are monitored at the same time. + * - At the opposite of I2C_CheckEvent() function, this function allows user to + * choose when an event is accepted (when all events flags are set and no + * other flags are set or just when the needed flags are set like + * I2C_CheckEvent() function). + * - Limitations: + * - User may need to define his own events. + * - Same remark concerning the error management is applicable for this + * function if user decides to check only regular communication flags (and + * ignores error flags). + * + * + * 3) Flag-based state monitoring: + * Using the function I2C_GetFlagStatus() which simply returns the status of + * one single flag (ie. I2C_FLAG_RXNE ...). + * - When to use: + * - This function could be used for specific applications or in debug phase. + * - It is suitable when only one flag checking is needed (most I2C events + * are monitored through multiple flags). + * - Limitations: + * - When calling this function, the Status register is accessed. Some flags are + * cleared when the status register is accessed. So checking the status + * of one Flag, may clear other ones. + * - Function may need to be called twice or more in order to monitor one + * single event. + * + * For detailed description of Events, please refer to section I2C_Events in + * stm32f10x_i2c.h file. + * + */ + +/** + * + * 1) Basic state monitoring + ******************************************************************************* + */ + +/** + * @brief Checks whether the last I2Cx Event is equal to the one passed + * as parameter. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_EVENT: specifies the event to be checked. + * This parameter can be one of the following values: + * @arg I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_BYTE_RECEIVED : EV2 + * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF) : EV2 + * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL) : EV2 + * @arg I2C_EVENT_SLAVE_BYTE_TRANSMITTED : EV3 + * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF) : EV3 + * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL) : EV3 + * @arg I2C_EVENT_SLAVE_ACK_FAILURE : EV3_2 + * @arg I2C_EVENT_SLAVE_STOP_DETECTED : EV4 + * @arg I2C_EVENT_MASTER_MODE_SELECT : EV5 + * @arg I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED : EV6 + * @arg I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED : EV6 + * @arg I2C_EVENT_MASTER_BYTE_RECEIVED : EV7 + * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTING : EV8 + * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTED : EV8_2 + * @arg I2C_EVENT_MASTER_MODE_ADDRESS10 : EV9 + * + * @note: For detailed description of Events, please refer to section + * I2C_Events in stm32f10x_i2c.h file. + * + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Last event is equal to the I2C_EVENT + * - ERROR: Last event is different from the I2C_EVENT + */ +ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT) +{ + uint32_t lastevent = 0; + uint32_t flag1 = 0, flag2 = 0; + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_EVENT(I2C_EVENT)); + + /* Read the I2Cx status register */ + flag1 = I2Cx->SR1; + flag2 = I2Cx->SR2; + flag2 = flag2 << 16; + + /* Get the last event value from I2C status register */ + lastevent = (flag1 | flag2) & FLAG_Mask; + + /* Check whether the last event contains the I2C_EVENT */ + if ((lastevent & I2C_EVENT) == I2C_EVENT) + { + /* SUCCESS: last event is equal to I2C_EVENT */ + status = SUCCESS; + } + else + { + /* ERROR: last event is different from I2C_EVENT */ + status = ERROR; + } + /* Return status */ + return status; +} + +/** + * + * 2) Advanced state monitoring + ******************************************************************************* + */ + +/** + * @brief Returns the last I2Cx Event. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * + * @note: For detailed description of Events, please refer to section + * I2C_Events in stm32f10x_i2c.h file. + * + * @retval The last event + */ +uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx) +{ + uint32_t lastevent = 0; + uint32_t flag1 = 0, flag2 = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Read the I2Cx status register */ + flag1 = I2Cx->SR1; + flag2 = I2Cx->SR2; + flag2 = flag2 << 16; + + /* Get the last event value from I2C status register */ + lastevent = (flag1 | flag2) & FLAG_Mask; + + /* Return status */ + return lastevent; +} + +/** + * + * 3) Flag-based state monitoring + ******************************************************************************* + */ + +/** + * @brief Checks whether the specified I2C flag is set or not. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2C_FLAG_DUALF: Dual flag (Slave mode) + * @arg I2C_FLAG_SMBHOST: SMBus host header (Slave mode) + * @arg I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode) + * @arg I2C_FLAG_GENCALL: General call header flag (Slave mode) + * @arg I2C_FLAG_TRA: Transmitter/Receiver flag + * @arg I2C_FLAG_BUSY: Bus busy flag + * @arg I2C_FLAG_MSL: Master/Slave flag + * @arg I2C_FLAG_SMBALERT: SMBus Alert flag + * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag + * @arg I2C_FLAG_PECERR: PEC error in reception flag + * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_FLAG_AF: Acknowledge failure flag + * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_FLAG_BERR: Bus error flag + * @arg I2C_FLAG_TXE: Data register empty flag (Transmitter) + * @arg I2C_FLAG_RXNE: Data register not empty (Receiver) flag + * @arg I2C_FLAG_STOPF: Stop detection flag (Slave mode) + * @arg I2C_FLAG_ADD10: 10-bit header sent flag (Master mode) + * @arg I2C_FLAG_BTF: Byte transfer finished flag + * @arg I2C_FLAG_ADDR: Address sent flag (Master mode) "ADSL" + * Address matched flag (Slave mode)"ENDA" + * @arg I2C_FLAG_SB: Start bit flag (Master mode) + * @retval The new state of I2C_FLAG (SET or RESET). + */ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) +{ + FlagStatus bitstatus = RESET; + __IO uint32_t i2creg = 0, i2cxbase = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_GET_FLAG(I2C_FLAG)); + + /* Get the I2Cx peripheral base address */ + i2cxbase = (uint32_t)I2Cx; + + /* Read flag register index */ + i2creg = I2C_FLAG >> 28; + + /* Get bit[23:0] of the flag */ + I2C_FLAG &= FLAG_Mask; + + if(i2creg != 0) + { + /* Get the I2Cx SR1 register address */ + i2cxbase += 0x14; + } + else + { + /* Flag in I2Cx SR2 Register */ + I2C_FLAG = (uint32_t)(I2C_FLAG >> 16); + /* Get the I2Cx SR2 register address */ + i2cxbase += 0x18; + } + + if(((*(__IO uint32_t *)i2cxbase) & I2C_FLAG) != (uint32_t)RESET) + { + /* I2C_FLAG is set */ + bitstatus = SET; + } + else + { + /* I2C_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the I2C_FLAG status */ + return bitstatus; +} + + + +/** + * @brief Clears the I2Cx's pending flags. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg I2C_FLAG_SMBALERT: SMBus Alert flag + * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag + * @arg I2C_FLAG_PECERR: PEC error in reception flag + * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_FLAG_AF: Acknowledge failure flag + * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_FLAG_BERR: Bus error flag + * + * @note + * - STOPF (STOP detection) is cleared by software sequence: a read operation + * to I2C_SR1 register (I2C_GetFlagStatus()) followed by a write operation + * to I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). + * - ADD10 (10-bit header sent) is cleared by software sequence: a read + * operation to I2C_SR1 (I2C_GetFlagStatus()) followed by writing the + * second byte of the address in DR register. + * - BTF (Byte Transfer Finished) is cleared by software sequence: a read + * operation to I2C_SR1 register (I2C_GetFlagStatus()) followed by a + * read/write to I2C_DR register (I2C_SendData()). + * - ADDR (Address sent) is cleared by software sequence: a read operation to + * I2C_SR1 register (I2C_GetFlagStatus()) followed by a read operation to + * I2C_SR2 register ((void)(I2Cx->SR2)). + * - SB (Start Bit) is cleared software sequence: a read operation to I2C_SR1 + * register (I2C_GetFlagStatus()) followed by a write operation to I2C_DR + * register (I2C_SendData()). + * @retval None + */ +void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) +{ + uint32_t flagpos = 0; + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG)); + /* Get the I2C flag position */ + flagpos = I2C_FLAG & FLAG_Mask; + /* Clear the selected I2C flag */ + I2Cx->SR1 = (uint16_t)~flagpos; +} + +/** + * @brief Checks whether the specified I2C interrupt has occurred or not. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_IT: specifies the interrupt source to check. + * This parameter can be one of the following values: + * @arg I2C_IT_SMBALERT: SMBus Alert flag + * @arg I2C_IT_TIMEOUT: Timeout or Tlow error flag + * @arg I2C_IT_PECERR: PEC error in reception flag + * @arg I2C_IT_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_IT_AF: Acknowledge failure flag + * @arg I2C_IT_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_IT_BERR: Bus error flag + * @arg I2C_IT_TXE: Data register empty flag (Transmitter) + * @arg I2C_IT_RXNE: Data register not empty (Receiver) flag + * @arg I2C_IT_STOPF: Stop detection flag (Slave mode) + * @arg I2C_IT_ADD10: 10-bit header sent flag (Master mode) + * @arg I2C_IT_BTF: Byte transfer finished flag + * @arg I2C_IT_ADDR: Address sent flag (Master mode) "ADSL" + * Address matched flag (Slave mode)"ENDAD" + * @arg I2C_IT_SB: Start bit flag (Master mode) + * @retval The new state of I2C_IT (SET or RESET). + */ +ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_GET_IT(I2C_IT)); + + /* Check if the interrupt source is enabled or not */ + enablestatus = (uint32_t)(((I2C_IT & ITEN_Mask) >> 16) & (I2Cx->CR2)) ; + + /* Get bit[23:0] of the flag */ + I2C_IT &= FLAG_Mask; + + /* Check the status of the specified I2C flag */ + if (((I2Cx->SR1 & I2C_IT) != (uint32_t)RESET) && enablestatus) + { + /* I2C_IT is set */ + bitstatus = SET; + } + else + { + /* I2C_IT is reset */ + bitstatus = RESET; + } + /* Return the I2C_IT status */ + return bitstatus; +} + +/** + * @brief Clears the I2Cxs interrupt pending bits. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg I2C_IT_SMBALERT: SMBus Alert interrupt + * @arg I2C_IT_TIMEOUT: Timeout or Tlow error interrupt + * @arg I2C_IT_PECERR: PEC error in reception interrupt + * @arg I2C_IT_OVR: Overrun/Underrun interrupt (Slave mode) + * @arg I2C_IT_AF: Acknowledge failure interrupt + * @arg I2C_IT_ARLO: Arbitration lost interrupt (Master mode) + * @arg I2C_IT_BERR: Bus error interrupt + * + * @note + * - STOPF (STOP detection) is cleared by software sequence: a read operation + * to I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to + * I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). + * - ADD10 (10-bit header sent) is cleared by software sequence: a read + * operation to I2C_SR1 (I2C_GetITStatus()) followed by writing the second + * byte of the address in I2C_DR register. + * - BTF (Byte Transfer Finished) is cleared by software sequence: a read + * operation to I2C_SR1 register (I2C_GetITStatus()) followed by a + * read/write to I2C_DR register (I2C_SendData()). + * - ADDR (Address sent) is cleared by software sequence: a read operation to + * I2C_SR1 register (I2C_GetITStatus()) followed by a read operation to + * I2C_SR2 register ((void)(I2Cx->SR2)). + * - SB (Start Bit) is cleared by software sequence: a read operation to + * I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to + * I2C_DR register (I2C_SendData()). + * @retval None + */ +void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT) +{ + uint32_t flagpos = 0; + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLEAR_IT(I2C_IT)); + /* Get the I2C flag position */ + flagpos = I2C_IT & FLAG_Mask; + /* Clear the selected I2C flag */ + I2Cx->SR1 = (uint16_t)~flagpos; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_iwdg.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_iwdg.c new file mode 100644 index 0000000..c7cbf7e --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_iwdg.c @@ -0,0 +1,190 @@ +/** + ****************************************************************************** + * @file stm32f10x_iwdg.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the IWDG firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_iwdg.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup IWDG + * @brief IWDG driver modules + * @{ + */ + +/** @defgroup IWDG_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Private_Defines + * @{ + */ + +/* ---------------------- IWDG registers bit mask ----------------------------*/ + +/* KR register bit mask */ +#define KR_KEY_Reload ((uint16_t)0xAAAA) +#define KR_KEY_Enable ((uint16_t)0xCCCC) + +/** + * @} + */ + +/** @defgroup IWDG_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Private_Functions + * @{ + */ + +/** + * @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers. + * @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers. + * This parameter can be one of the following values: + * @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers + * @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers + * @retval None + */ +void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess) +{ + /* Check the parameters */ + assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess)); + IWDG->KR = IWDG_WriteAccess; +} + +/** + * @brief Sets IWDG Prescaler value. + * @param IWDG_Prescaler: specifies the IWDG Prescaler value. + * This parameter can be one of the following values: + * @arg IWDG_Prescaler_4: IWDG prescaler set to 4 + * @arg IWDG_Prescaler_8: IWDG prescaler set to 8 + * @arg IWDG_Prescaler_16: IWDG prescaler set to 16 + * @arg IWDG_Prescaler_32: IWDG prescaler set to 32 + * @arg IWDG_Prescaler_64: IWDG prescaler set to 64 + * @arg IWDG_Prescaler_128: IWDG prescaler set to 128 + * @arg IWDG_Prescaler_256: IWDG prescaler set to 256 + * @retval None + */ +void IWDG_SetPrescaler(uint8_t IWDG_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler)); + IWDG->PR = IWDG_Prescaler; +} + +/** + * @brief Sets IWDG Reload value. + * @param Reload: specifies the IWDG Reload value. + * This parameter must be a number between 0 and 0x0FFF. + * @retval None + */ +void IWDG_SetReload(uint16_t Reload) +{ + /* Check the parameters */ + assert_param(IS_IWDG_RELOAD(Reload)); + IWDG->RLR = Reload; +} + +/** + * @brief Reloads IWDG counter with value defined in the reload register + * (write access to IWDG_PR and IWDG_RLR registers disabled). + * @param None + * @retval None + */ +void IWDG_ReloadCounter(void) +{ + IWDG->KR = KR_KEY_Reload; +} + +/** + * @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled). + * @param None + * @retval None + */ +void IWDG_Enable(void) +{ + IWDG->KR = KR_KEY_Enable; +} + +/** + * @brief Checks whether the specified IWDG flag is set or not. + * @param IWDG_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg IWDG_FLAG_PVU: Prescaler Value Update on going + * @arg IWDG_FLAG_RVU: Reload Value Update on going + * @retval The new state of IWDG_FLAG (SET or RESET). + */ +FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_IWDG_FLAG(IWDG_FLAG)); + if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_pwr.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_pwr.c new file mode 100644 index 0000000..a5a5c57 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_pwr.c @@ -0,0 +1,307 @@ +/** + ****************************************************************************** + * @file stm32f10x_pwr.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the PWR firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_pwr.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup PWR + * @brief PWR driver modules + * @{ + */ + +/** @defgroup PWR_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Private_Defines + * @{ + */ + +/* --------- PWR registers bit address in the alias region ---------- */ +#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) + +/* --- CR Register ---*/ + +/* Alias word address of DBP bit */ +#define CR_OFFSET (PWR_OFFSET + 0x00) +#define DBP_BitNumber 0x08 +#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4)) + +/* Alias word address of PVDE bit */ +#define PVDE_BitNumber 0x04 +#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of EWUP bit */ +#define CSR_OFFSET (PWR_OFFSET + 0x04) +#define EWUP_BitNumber 0x08 +#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4)) + +/* ------------------ PWR registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_DS_MASK ((uint32_t)0xFFFFFFFC) +#define CR_PLS_MASK ((uint32_t)0xFFFFFF1F) + + +/** + * @} + */ + +/** @defgroup PWR_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the PWR peripheral registers to their default reset values. + * @param None + * @retval None + */ +void PWR_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE); +} + +/** + * @brief Enables or disables access to the RTC and backup registers. + * @param NewState: new state of the access to the RTC and backup registers. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_BackupAccessCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Power Voltage Detector(PVD). + * @param NewState: new state of the PVD. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_PVDCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). + * @param PWR_PVDLevel: specifies the PVD detection level + * This parameter can be one of the following values: + * @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V + * @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V + * @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V + * @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V + * @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V + * @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V + * @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V + * @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V + * @retval None + */ +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel)); + tmpreg = PWR->CR; + /* Clear PLS[7:5] bits */ + tmpreg &= CR_PLS_MASK; + /* Set PLS[7:5] bits according to PWR_PVDLevel value */ + tmpreg |= PWR_PVDLevel; + /* Store the new value */ + PWR->CR = tmpreg; +} + +/** + * @brief Enables or disables the WakeUp Pin functionality. + * @param NewState: new state of the WakeUp Pin functionality. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_WakeUpPinCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState; +} + +/** + * @brief Enters STOP mode. + * @param PWR_Regulator: specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_Regulator_ON: STOP mode with regulator ON + * @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode + * @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction + * @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction + * @retval None + */ +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(PWR_Regulator)); + assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry)); + + /* Select the regulator state in STOP mode ---------------------------------*/ + tmpreg = PWR->CR; + /* Clear PDDS and LPDS bits */ + tmpreg &= CR_DS_MASK; + /* Set LPDS bit according to PWR_Regulator value */ + tmpreg |= PWR_Regulator; + /* Store the new value */ + PWR->CR = tmpreg; + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP; + + /* Select STOP mode entry --------------------------------------------------*/ + if(PWR_STOPEntry == PWR_STOPEntry_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP); +} + +/** + * @brief Enters STANDBY mode. + * @param None + * @retval None + */ +void PWR_EnterSTANDBYMode(void) +{ + /* Clear Wake-up flag */ + PWR->CR |= PWR_CR_CWUF; + /* Select STANDBY mode */ + PWR->CR |= PWR_CR_PDDS; + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP; +/* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM ) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + +/** + * @brief Checks whether the specified PWR flag is set or not. + * @param PWR_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + * @arg PWR_FLAG_PVDO: PVD Output + * @retval The new state of PWR_FLAG (SET or RESET). + */ +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_PWR_GET_FLAG(PWR_FLAG)); + + if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the PWR's pending flags. + * @param PWR_FLAG: specifies the flag to clear. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + * @retval None + */ +void PWR_ClearFlag(uint32_t PWR_FLAG) +{ + /* Check the parameters */ + assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG)); + + PWR->CR |= PWR_FLAG << 2; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_rcc.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_rcc.c new file mode 100644 index 0000000..a29034b --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_rcc.c @@ -0,0 +1,1470 @@ +/** + ****************************************************************************** + * @file stm32f10x_rcc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the RCC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup RCC + * @brief RCC driver modules + * @{ + */ + +/** @defgroup RCC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Defines + * @{ + */ + +/* ------------ RCC registers bit address in the alias region ----------- */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) + +/* --- CR Register ---*/ + +/* Alias word address of HSION bit */ +#define CR_OFFSET (RCC_OFFSET + 0x00) +#define HSION_BitNumber 0x00 +#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4)) + +/* Alias word address of PLLON bit */ +#define PLLON_BitNumber 0x18 +#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4)) + +#ifdef STM32F10X_CL + /* Alias word address of PLL2ON bit */ + #define PLL2ON_BitNumber 0x1A + #define CR_PLL2ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL2ON_BitNumber * 4)) + + /* Alias word address of PLL3ON bit */ + #define PLL3ON_BitNumber 0x1C + #define CR_PLL3ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL3ON_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* Alias word address of CSSON bit */ +#define CSSON_BitNumber 0x13 +#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4)) + +/* --- CFGR Register ---*/ + +/* Alias word address of USBPRE bit */ +#define CFGR_OFFSET (RCC_OFFSET + 0x04) + +#ifndef STM32F10X_CL + #define USBPRE_BitNumber 0x16 + #define CFGR_USBPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4)) +#else + #define OTGFSPRE_BitNumber 0x16 + #define CFGR_OTGFSPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (OTGFSPRE_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* --- BDCR Register ---*/ + +/* Alias word address of RTCEN bit */ +#define BDCR_OFFSET (RCC_OFFSET + 0x20) +#define RTCEN_BitNumber 0x0F +#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4)) + +/* Alias word address of BDRST bit */ +#define BDRST_BitNumber 0x10 +#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of LSION bit */ +#define CSR_OFFSET (RCC_OFFSET + 0x24) +#define LSION_BitNumber 0x00 +#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4)) + +#ifdef STM32F10X_CL +/* --- CFGR2 Register ---*/ + + /* Alias word address of I2S2SRC bit */ + #define CFGR2_OFFSET (RCC_OFFSET + 0x2C) + #define I2S2SRC_BitNumber 0x11 + #define CFGR2_I2S2SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S2SRC_BitNumber * 4)) + + /* Alias word address of I2S3SRC bit */ + #define I2S3SRC_BitNumber 0x12 + #define CFGR2_I2S3SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S3SRC_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* ---------------------- RCC registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_HSEBYP_Reset ((uint32_t)0xFFFBFFFF) +#define CR_HSEBYP_Set ((uint32_t)0x00040000) +#define CR_HSEON_Reset ((uint32_t)0xFFFEFFFF) +#define CR_HSEON_Set ((uint32_t)0x00010000) +#define CR_HSITRIM_Mask ((uint32_t)0xFFFFFF07) + +/* CFGR register bit mask */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + #define CFGR_PLL_Mask ((uint32_t)0xFFC2FFFF) +#else + #define CFGR_PLL_Mask ((uint32_t)0xFFC0FFFF) +#endif /* STM32F10X_CL */ + +#define CFGR_PLLMull_Mask ((uint32_t)0x003C0000) +#define CFGR_PLLSRC_Mask ((uint32_t)0x00010000) +#define CFGR_PLLXTPRE_Mask ((uint32_t)0x00020000) +#define CFGR_SWS_Mask ((uint32_t)0x0000000C) +#define CFGR_SW_Mask ((uint32_t)0xFFFFFFFC) +#define CFGR_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F) +#define CFGR_HPRE_Set_Mask ((uint32_t)0x000000F0) +#define CFGR_PPRE1_Reset_Mask ((uint32_t)0xFFFFF8FF) +#define CFGR_PPRE1_Set_Mask ((uint32_t)0x00000700) +#define CFGR_PPRE2_Reset_Mask ((uint32_t)0xFFFFC7FF) +#define CFGR_PPRE2_Set_Mask ((uint32_t)0x00003800) +#define CFGR_ADCPRE_Reset_Mask ((uint32_t)0xFFFF3FFF) +#define CFGR_ADCPRE_Set_Mask ((uint32_t)0x0000C000) + +/* CSR register bit mask */ +#define CSR_RMVF_Set ((uint32_t)0x01000000) + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) +/* CFGR2 register bit mask */ + #define CFGR2_PREDIV1SRC ((uint32_t)0x00010000) + #define CFGR2_PREDIV1 ((uint32_t)0x0000000F) +#endif +#ifdef STM32F10X_CL + #define CFGR2_PREDIV2 ((uint32_t)0x000000F0) + #define CFGR2_PLL2MUL ((uint32_t)0x00000F00) + #define CFGR2_PLL3MUL ((uint32_t)0x0000F000) +#endif /* STM32F10X_CL */ + +/* RCC Flag Mask */ +#define FLAG_Mask ((uint8_t)0x1F) + +/* CIR register byte 2 (Bits[15:8]) base address */ +#define CIR_BYTE2_ADDRESS ((uint32_t)0x40021009) + +/* CIR register byte 3 (Bits[23:16]) base address */ +#define CIR_BYTE3_ADDRESS ((uint32_t)0x4002100A) + +/* CFGR register byte 4 (Bits[31:24]) base address */ +#define CFGR_BYTE4_ADDRESS ((uint32_t)0x40021007) + +/* BDCR register base address */ +#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET) + +/** + * @} + */ + +/** @defgroup RCC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Variables + * @{ + */ + +static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; +static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8}; + +/** + * @} + */ + +/** @defgroup RCC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Functions + * @{ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @param None + * @retval None + */ +void RCC_DeInit(void) +{ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ +#ifndef STM32F10X_CL + RCC->CFGR &= (uint32_t)0xF8FF0000; +#else + RCC->CFGR &= (uint32_t)0xF0FF0000; +#endif /* STM32F10X_CL */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + +#ifdef STM32F10X_CL + /* Reset PLL2ON and PLL3ON bits */ + RCC->CR &= (uint32_t)0xEBFFFFFF; + + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x00FF0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#else + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; +#endif /* STM32F10X_CL */ + +} + +/** + * @brief Configures the External High Speed oscillator (HSE). + * @note HSE can not be stopped if it is used directly or through the PLL as system clock. + * @param RCC_HSE: specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg RCC_HSE_OFF: HSE oscillator OFF + * @arg RCC_HSE_ON: HSE oscillator ON + * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock + * @retval None + */ +void RCC_HSEConfig(uint32_t RCC_HSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_HSE)); + /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/ + /* Reset HSEON bit */ + RCC->CR &= CR_HSEON_Reset; + /* Reset HSEBYP bit */ + RCC->CR &= CR_HSEBYP_Reset; + /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */ + switch(RCC_HSE) + { + case RCC_HSE_ON: + /* Set HSEON bit */ + RCC->CR |= CR_HSEON_Set; + break; + + case RCC_HSE_Bypass: + /* Set HSEBYP and HSEON bits */ + RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set; + break; + + default: + break; + } +} + +/** + * @brief Waits for HSE start-up. + * @param None + * @retval An ErrorStatus enumuration value: + * - SUCCESS: HSE oscillator is stable and ready to use + * - ERROR: HSE oscillator not yet ready + */ +ErrorStatus RCC_WaitForHSEStartUp(void) +{ + __IO uint32_t StartUpCounter = 0; + ErrorStatus status = ERROR; + FlagStatus HSEStatus = RESET; + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); + StartUpCounter++; + } while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET)); + + if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) + { + status = SUCCESS; + } + else + { + status = ERROR; + } + return (status); +} + +/** + * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value. + * @param HSICalibrationValue: specifies the calibration trimming value. + * This parameter must be a number between 0 and 0x1F. + * @retval None + */ +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue)); + tmpreg = RCC->CR; + /* Clear HSITRIM[4:0] bits */ + tmpreg &= CR_HSITRIM_Mask; + /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */ + tmpreg |= (uint32_t)HSICalibrationValue << 3; + /* Store the new value */ + RCC->CR = tmpreg; +} + +/** + * @brief Enables or disables the Internal High Speed oscillator (HSI). + * @note HSI can not be stopped if it is used directly or through the PLL as system clock. + * @param NewState: new state of the HSI. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_HSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the PLL clock source and multiplication factor. + * @note This function must be used only when the PLL is disabled. + * @param RCC_PLLSource: specifies the PLL entry clock source. + * For @b STM32_Connectivity_line_devices or @b STM32_Value_line_devices, + * this parameter can be one of the following values: + * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry + * @arg RCC_PLLSource_PREDIV1: PREDIV1 clock selected as PLL clock entry + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry + * @arg RCC_PLLSource_HSE_Div1: HSE oscillator clock selected as PLL clock entry + * @arg RCC_PLLSource_HSE_Div2: HSE oscillator clock divided by 2 selected as PLL clock entry + * @param RCC_PLLMul: specifies the PLL multiplication factor. + * For @b STM32_Connectivity_line_devices, this parameter can be RCC_PLLMul_x where x:{[4,9], 6_5} + * For @b other_STM32_devices, this parameter can be RCC_PLLMul_x where x:[2,16] + * @retval None + */ +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_PLLMul)); + + tmpreg = RCC->CFGR; + /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */ + tmpreg &= CFGR_PLL_Mask; + /* Set the PLL configuration bits */ + tmpreg |= RCC_PLLSource | RCC_PLLMul; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Enables or disables the PLL. + * @note The PLL can not be disabled if it is used as system clock. + * @param NewState: new state of the PLL. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLLCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState; +} + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) +/** + * @brief Configures the PREDIV1 division factor. + * @note + * - This function must be used only when the PLL is disabled. + * - This function applies only to STM32 Connectivity line and Value line + * devices. + * @param RCC_PREDIV1_Source: specifies the PREDIV1 clock source. + * This parameter can be one of the following values: + * @arg RCC_PREDIV1_Source_HSE: HSE selected as PREDIV1 clock + * @arg RCC_PREDIV1_Source_PLL2: PLL2 selected as PREDIV1 clock + * @note + * For @b STM32_Value_line_devices this parameter is always RCC_PREDIV1_Source_HSE + * @param RCC_PREDIV1_Div: specifies the PREDIV1 clock division factor. + * This parameter can be RCC_PREDIV1_Divx where x:[1,16] + * @retval None + */ +void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PREDIV1_SOURCE(RCC_PREDIV1_Source)); + assert_param(IS_RCC_PREDIV1(RCC_PREDIV1_Div)); + + tmpreg = RCC->CFGR2; + /* Clear PREDIV1[3:0] and PREDIV1SRC bits */ + tmpreg &= ~(CFGR2_PREDIV1 | CFGR2_PREDIV1SRC); + /* Set the PREDIV1 clock source and division factor */ + tmpreg |= RCC_PREDIV1_Source | RCC_PREDIV1_Div ; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} +#endif + +#ifdef STM32F10X_CL +/** + * @brief Configures the PREDIV2 division factor. + * @note + * - This function must be used only when both PLL2 and PLL3 are disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PREDIV2_Div: specifies the PREDIV2 clock division factor. + * This parameter can be RCC_PREDIV2_Divx where x:[1,16] + * @retval None + */ +void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PREDIV2(RCC_PREDIV2_Div)); + + tmpreg = RCC->CFGR2; + /* Clear PREDIV2[3:0] bits */ + tmpreg &= ~CFGR2_PREDIV2; + /* Set the PREDIV2 division factor */ + tmpreg |= RCC_PREDIV2_Div; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + +/** + * @brief Configures the PLL2 multiplication factor. + * @note + * - This function must be used only when the PLL2 is disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PLL2Mul: specifies the PLL2 multiplication factor. + * This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20} + * @retval None + */ +void RCC_PLL2Config(uint32_t RCC_PLL2Mul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL2_MUL(RCC_PLL2Mul)); + + tmpreg = RCC->CFGR2; + /* Clear PLL2Mul[3:0] bits */ + tmpreg &= ~CFGR2_PLL2MUL; + /* Set the PLL2 configuration bits */ + tmpreg |= RCC_PLL2Mul; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + + +/** + * @brief Enables or disables the PLL2. + * @note + * - The PLL2 can not be disabled if it is used indirectly as system clock + * (i.e. it is used as PLL clock entry that is used as System clock). + * - This function applies only to STM32 Connectivity line devices. + * @param NewState: new state of the PLL2. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLL2Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_PLL2ON_BB = (uint32_t)NewState; +} + + +/** + * @brief Configures the PLL3 multiplication factor. + * @note + * - This function must be used only when the PLL3 is disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PLL3Mul: specifies the PLL3 multiplication factor. + * This parameter can be RCC_PLL3Mul_x where x:{[8,14], 16, 20} + * @retval None + */ +void RCC_PLL3Config(uint32_t RCC_PLL3Mul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL3_MUL(RCC_PLL3Mul)); + + tmpreg = RCC->CFGR2; + /* Clear PLL3Mul[3:0] bits */ + tmpreg &= ~CFGR2_PLL3MUL; + /* Set the PLL3 configuration bits */ + tmpreg |= RCC_PLL3Mul; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + + +/** + * @brief Enables or disables the PLL3. + * @note This function applies only to STM32 Connectivity line devices. + * @param NewState: new state of the PLL3. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLL3Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_PLL3ON_BB = (uint32_t)NewState; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the system clock (SYSCLK). + * @param RCC_SYSCLKSource: specifies the clock source used as system clock. + * This parameter can be one of the following values: + * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock + * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock + * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock + * @retval None + */ +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); + tmpreg = RCC->CFGR; + /* Clear SW[1:0] bits */ + tmpreg &= CFGR_SW_Mask; + /* Set SW[1:0] bits according to RCC_SYSCLKSource value */ + tmpreg |= RCC_SYSCLKSource; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Returns the clock source used as system clock. + * @param None + * @retval The clock source used as system clock. The returned value can + * be one of the following: + * - 0x00: HSI used as system clock + * - 0x04: HSE used as system clock + * - 0x08: PLL used as system clock + */ +uint8_t RCC_GetSYSCLKSource(void) +{ + return ((uint8_t)(RCC->CFGR & CFGR_SWS_Mask)); +} + +/** + * @brief Configures the AHB clock (HCLK). + * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from + * the system clock (SYSCLK). + * This parameter can be one of the following values: + * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK + * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2 + * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4 + * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8 + * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16 + * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64 + * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128 + * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256 + * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512 + * @retval None + */ +void RCC_HCLKConfig(uint32_t RCC_SYSCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_HCLK(RCC_SYSCLK)); + tmpreg = RCC->CFGR; + /* Clear HPRE[3:0] bits */ + tmpreg &= CFGR_HPRE_Reset_Mask; + /* Set HPRE[3:0] bits according to RCC_SYSCLK value */ + tmpreg |= RCC_SYSCLK; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the Low Speed APB clock (PCLK1). + * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB1 clock = HCLK + * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16 + * @retval None + */ +void RCC_PCLK1Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + tmpreg = RCC->CFGR; + /* Clear PPRE1[2:0] bits */ + tmpreg &= CFGR_PPRE1_Reset_Mask; + /* Set PPRE1[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the High Speed APB clock (PCLK2). + * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB2 clock = HCLK + * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16 + * @retval None + */ +void RCC_PCLK2Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + tmpreg = RCC->CFGR; + /* Clear PPRE2[2:0] bits */ + tmpreg &= CFGR_PPRE2_Reset_Mask; + /* Set PPRE2[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK << 3; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Enables or disables the specified RCC interrupts. + * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * + * @param NewState: new state of the specified RCC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_IT(RCC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Perform Byte access to RCC_CIR bits to enable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT; + } + else + { + /* Perform Byte access to RCC_CIR bits to disable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT; + } +} + +#ifndef STM32F10X_CL +/** + * @brief Configures the USB clock (USBCLK). + * @param RCC_USBCLKSource: specifies the USB clock source. This clock is + * derived from the PLL output. + * This parameter can be one of the following values: + * @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB + * clock source + * @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source + * @retval None + */ +void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource)); + + *(__IO uint32_t *) CFGR_USBPRE_BB = RCC_USBCLKSource; +} +#else +/** + * @brief Configures the USB OTG FS clock (OTGFSCLK). + * This function applies only to STM32 Connectivity line devices. + * @param RCC_OTGFSCLKSource: specifies the USB OTG FS clock source. + * This clock is derived from the PLL output. + * This parameter can be one of the following values: + * @arg RCC_OTGFSCLKSource_PLLVCO_Div3: PLL VCO clock divided by 2 selected as USB OTG FS clock source + * @arg RCC_OTGFSCLKSource_PLLVCO_Div2: PLL VCO clock divided by 2 selected as USB OTG FS clock source + * @retval None + */ +void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_OTGFSCLK_SOURCE(RCC_OTGFSCLKSource)); + + *(__IO uint32_t *) CFGR_OTGFSPRE_BB = RCC_OTGFSCLKSource; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the ADC clock (ADCCLK). + * @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from + * the APB2 clock (PCLK2). + * This parameter can be one of the following values: + * @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2 + * @arg RCC_PCLK2_Div4: ADC clock = PCLK2/4 + * @arg RCC_PCLK2_Div6: ADC clock = PCLK2/6 + * @arg RCC_PCLK2_Div8: ADC clock = PCLK2/8 + * @retval None + */ +void RCC_ADCCLKConfig(uint32_t RCC_PCLK2) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_ADCCLK(RCC_PCLK2)); + tmpreg = RCC->CFGR; + /* Clear ADCPRE[1:0] bits */ + tmpreg &= CFGR_ADCPRE_Reset_Mask; + /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */ + tmpreg |= RCC_PCLK2; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +#ifdef STM32F10X_CL +/** + * @brief Configures the I2S2 clock source(I2S2CLK). + * @note + * - This function must be called before enabling I2S2 APB clock. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_I2S2CLKSource: specifies the I2S2 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2S2CLKSource_SYSCLK: system clock selected as I2S2 clock entry + * @arg RCC_I2S2CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S2 clock entry + * @retval None + */ +void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_I2S2CLK_SOURCE(RCC_I2S2CLKSource)); + + *(__IO uint32_t *) CFGR2_I2S2SRC_BB = RCC_I2S2CLKSource; +} + +/** + * @brief Configures the I2S3 clock source(I2S2CLK). + * @note + * - This function must be called before enabling I2S3 APB clock. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_I2S3CLKSource: specifies the I2S3 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2S3CLKSource_SYSCLK: system clock selected as I2S3 clock entry + * @arg RCC_I2S3CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S3 clock entry + * @retval None + */ +void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_I2S3CLK_SOURCE(RCC_I2S3CLKSource)); + + *(__IO uint32_t *) CFGR2_I2S3SRC_BB = RCC_I2S3CLKSource; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the External Low Speed oscillator (LSE). + * @param RCC_LSE: specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg RCC_LSE_OFF: LSE oscillator OFF + * @arg RCC_LSE_ON: LSE oscillator ON + * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock + * @retval None + */ +void RCC_LSEConfig(uint8_t RCC_LSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_LSE)); + /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/ + /* Reset LSEON bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; + /* Reset LSEBYP bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; + /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */ + switch(RCC_LSE) + { + case RCC_LSE_ON: + /* Set LSEON bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON; + break; + + case RCC_LSE_Bypass: + /* Set LSEBYP and LSEON bits */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON; + break; + + default: + break; + } +} + +/** + * @brief Enables or disables the Internal Low Speed oscillator (LSI). + * @note LSI can not be disabled if the IWDG is running. + * @param NewState: new state of the LSI. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_LSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the RTC clock (RTCCLK). + * @note Once the RTC clock is selected it can't be changed unless the Backup domain is reset. + * @param RCC_RTCCLKSource: specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock + * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock + * @arg RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 selected as RTC clock + * @retval None + */ +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); + /* Select the RTC clock source */ + RCC->BDCR |= RCC_RTCCLKSource; +} + +/** + * @brief Enables or disables the RTC clock. + * @note This function must be used only after the RTC clock was selected using the RCC_RTCCLKConfig function. + * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_RTCCLKCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState; +} + +/** + * @brief Returns the frequencies of different on chip clocks. + * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold + * the clocks frequencies. + * @note The result of this function could be not correct when using + * fractional value for HSE crystal. + * @retval None + */ +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0; + +#ifdef STM32F10X_CL + uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + uint32_t prediv1factor = 0; +#endif + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & CFGR_SWS_Mask; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & CFGR_PLLMull_Mask; + pllsource = RCC->CFGR & CFGR_PLLSRC_Mask; + +#ifndef STM32F10X_CL + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull; + } + else + { + #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE >> 1) * pllmull; + } + else + { + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE * pllmull; + } + #endif + } +#else + pllmull = pllmull >> 18; + + if (pllmull != 0x0D) + { + pllmull += 2; + } + else + { /* PLL multiplication factor = PLL input clock * 6.5 */ + pllmull = 13 / 2; + } + + if (pllsource == 0x00) + {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull; + } + else + {/* PREDIV1 selected as PLL clock entry */ + + /* Get PREDIV1 clock source and division factor */ + prediv1source = RCC->CFGR2 & CFGR2_PREDIV1SRC; + prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; + + if (prediv1source == 0) + { /* HSE oscillator clock selected as PREDIV1 clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; + } + else + {/* PLL2 clock selected as PREDIV1 clock entry */ + + /* Get PREDIV2 division factor and PLL2 multiplication factor */ + prediv2factor = ((RCC->CFGR2 & CFGR2_PREDIV2) >> 4) + 1; + pll2mull = ((RCC->CFGR2 & CFGR2_PLL2MUL) >> 8 ) + 2; + RCC_Clocks->SYSCLK_Frequency = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; + } + } +#endif /* STM32F10X_CL */ + break; + + default: + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + } + + /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/ + /* Get HCLK prescaler */ + tmp = RCC->CFGR & CFGR_HPRE_Set_Mask; + tmp = tmp >> 4; + presc = APBAHBPrescTable[tmp]; + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; + /* Get PCLK1 prescaler */ + tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask; + tmp = tmp >> 8; + presc = APBAHBPrescTable[tmp]; + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + /* Get PCLK2 prescaler */ + tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask; + tmp = tmp >> 11; + presc = APBAHBPrescTable[tmp]; + /* PCLK2 clock frequency */ + RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + /* Get ADCCLK prescaler */ + tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask; + tmp = tmp >> 14; + presc = ADCPrescTable[tmp]; + /* ADCCLK clock frequency */ + RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc; +} + +/** + * @brief Enables or disables the AHB peripheral clock. + * @param RCC_AHBPeriph: specifies the AHB peripheral to gates its clock. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values: + * @arg RCC_AHBPeriph_DMA1 + * @arg RCC_AHBPeriph_DMA2 + * @arg RCC_AHBPeriph_SRAM + * @arg RCC_AHBPeriph_FLITF + * @arg RCC_AHBPeriph_CRC + * @arg RCC_AHBPeriph_OTG_FS + * @arg RCC_AHBPeriph_ETH_MAC + * @arg RCC_AHBPeriph_ETH_MAC_Tx + * @arg RCC_AHBPeriph_ETH_MAC_Rx + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values: + * @arg RCC_AHBPeriph_DMA1 + * @arg RCC_AHBPeriph_DMA2 + * @arg RCC_AHBPeriph_SRAM + * @arg RCC_AHBPeriph_FLITF + * @arg RCC_AHBPeriph_CRC + * @arg RCC_AHBPeriph_FSMC + * @arg RCC_AHBPeriph_SDIO + * + * @note SRAM and FLITF clock can be disabled only during sleep mode. + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHBENR |= RCC_AHBPeriph; + } + else + { + RCC->AHBENR &= ~RCC_AHBPeriph; + } +} + +/** + * @brief Enables or disables the High Speed APB (APB2) peripheral clock. + * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, + * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, + * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, + * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, + * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, + * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17, + * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB2ENR |= RCC_APB2Periph; + } + else + { + RCC->APB2ENR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Enables or disables the Low Speed APB (APB1) peripheral clock. + * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, + * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, + * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, + * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, + * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, + * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, + * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC, + * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB1ENR |= RCC_APB1Periph; + } + else + { + RCC->APB1ENR &= ~RCC_APB1Periph; + } +} + +#ifdef STM32F10X_CL +/** + * @brief Forces or releases AHB peripheral reset. + * @note This function applies only to STM32 Connectivity line devices. + * @param RCC_AHBPeriph: specifies the AHB peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_AHBPeriph_OTG_FS + * @arg RCC_AHBPeriph_ETH_MAC + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB_PERIPH_RESET(RCC_AHBPeriph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHBRSTR |= RCC_AHBPeriph; + } + else + { + RCC->AHBRSTR &= ~RCC_AHBPeriph; + } +} +#endif /* STM32F10X_CL */ + +/** + * @brief Forces or releases High Speed APB (APB2) peripheral reset. + * @param RCC_APB2Periph: specifies the APB2 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, + * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, + * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, + * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, + * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, + * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17, + * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11 + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB2RSTR |= RCC_APB2Periph; + } + else + { + RCC->APB2RSTR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Forces or releases Low Speed APB (APB1) peripheral reset. + * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, + * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, + * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, + * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, + * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, + * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, + * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC, + * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB1RSTR |= RCC_APB1Periph; + } + else + { + RCC->APB1RSTR &= ~RCC_APB1Periph; + } +} + +/** + * @brief Forces or releases the Backup domain reset. + * @param NewState: new state of the Backup domain reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_BackupResetCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Clock Security System. + * @param NewState: new state of the Clock Security System.. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ClockSecuritySystemCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState; +} + +/** + * @brief Selects the clock source to output on MCO pin. + * @param RCC_MCO: specifies the clock source to output. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_MCO_NoClock: No clock selected + * @arg RCC_MCO_SYSCLK: System clock selected + * @arg RCC_MCO_HSI: HSI oscillator clock selected + * @arg RCC_MCO_HSE: HSE oscillator clock selected + * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected + * @arg RCC_MCO_PLL2CLK: PLL2 clock selected + * @arg RCC_MCO_PLL3CLK_Div2: PLL3 clock divided by 2 selected + * @arg RCC_MCO_XT1: External 3-25 MHz oscillator clock selected + * @arg RCC_MCO_PLL3CLK: PLL3 clock selected + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_MCO_NoClock: No clock selected + * @arg RCC_MCO_SYSCLK: System clock selected + * @arg RCC_MCO_HSI: HSI oscillator clock selected + * @arg RCC_MCO_HSE: HSE oscillator clock selected + * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected + * + * @retval None + */ +void RCC_MCOConfig(uint8_t RCC_MCO) +{ + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCO)); + + /* Perform Byte access to MCO bits to select the MCO source */ + *(__IO uint8_t *) CFGR_BYTE4_ADDRESS = RCC_MCO; +} + +/** + * @brief Checks whether the specified RCC flag is set or not. + * @param RCC_FLAG: specifies the flag to check. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_PLLRDY: PLL clock ready + * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready + * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: Software reset + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset + * @arg RCC_FLAG_LPWRRST: Low Power reset + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_PLLRDY: PLL clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: Software reset + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset + * @arg RCC_FLAG_LPWRRST: Low Power reset + * + * @retval The new state of RCC_FLAG (SET or RESET). + */ +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG) +{ + uint32_t tmp = 0; + uint32_t statusreg = 0; + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RCC_FLAG(RCC_FLAG)); + + /* Get the RCC register index */ + tmp = RCC_FLAG >> 5; + if (tmp == 1) /* The flag to check is in CR register */ + { + statusreg = RCC->CR; + } + else if (tmp == 2) /* The flag to check is in BDCR register */ + { + statusreg = RCC->BDCR; + } + else /* The flag to check is in CSR register */ + { + statusreg = RCC->CSR; + } + + /* Get the flag position */ + tmp = RCC_FLAG & FLAG_Mask; + if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the RCC reset flags. + * @note The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + * @param None + * @retval None + */ +void RCC_ClearFlag(void) +{ + /* Set RMVF bit to clear the reset flags */ + RCC->CSR |= CSR_RMVF_Set; +} + +/** + * @brief Checks whether the specified RCC interrupt has occurred or not. + * @param RCC_IT: specifies the RCC interrupt source to check. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * @retval The new state of RCC_IT (SET or RESET). + */ +ITStatus RCC_GetITStatus(uint8_t RCC_IT) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RCC_GET_IT(RCC_IT)); + + /* Check the status of the specified RCC interrupt */ + if ((RCC->CIR & RCC_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + /* Return the RCC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the RCC's interrupt pending bits. + * @param RCC_IT: specifies the interrupt pending bit to clear. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * + * @arg RCC_IT_CSS: Clock Security System interrupt + * @retval None + */ +void RCC_ClearITPendingBit(uint8_t RCC_IT) +{ + /* Check the parameters */ + assert_param(IS_RCC_CLEAR_IT(RCC_IT)); + + /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt + pending bits */ + *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_rtc.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_rtc.c new file mode 100644 index 0000000..f05aef5 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_rtc.c @@ -0,0 +1,339 @@ +/** + ****************************************************************************** + * @file stm32f10x_rtc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the RTC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_rtc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup RTC + * @brief RTC driver modules + * @{ + */ + +/** @defgroup RTC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup RTC_Private_Defines + * @{ + */ +#define RTC_LSB_MASK ((uint32_t)0x0000FFFF) /*!< RTC LSB Mask */ +#define PRLH_MSB_MASK ((uint32_t)0x000F0000) /*!< RTC Prescaler MSB Mask */ + +/** + * @} + */ + +/** @defgroup RTC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Private_Functions + * @{ + */ + +/** + * @brief Enables or disables the specified RTC interrupts. + * @param RTC_IT: specifies the RTC interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_OW: Overflow interrupt + * @arg RTC_IT_ALR: Alarm interrupt + * @arg RTC_IT_SEC: Second interrupt + * @param NewState: new state of the specified RTC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RTC_IT(RTC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RTC->CRH |= RTC_IT; + } + else + { + RTC->CRH &= (uint16_t)~RTC_IT; + } +} + +/** + * @brief Enters the RTC configuration mode. + * @param None + * @retval None + */ +void RTC_EnterConfigMode(void) +{ + /* Set the CNF flag to enter in the Configuration Mode */ + RTC->CRL |= RTC_CRL_CNF; +} + +/** + * @brief Exits from the RTC configuration mode. + * @param None + * @retval None + */ +void RTC_ExitConfigMode(void) +{ + /* Reset the CNF flag to exit from the Configuration Mode */ + RTC->CRL &= (uint16_t)~((uint16_t)RTC_CRL_CNF); +} + +/** + * @brief Gets the RTC counter value. + * @param None + * @retval RTC counter value. + */ +uint32_t RTC_GetCounter(void) +{ + uint16_t tmp = 0; + tmp = RTC->CNTL; + return (((uint32_t)RTC->CNTH << 16 ) | tmp) ; +} + +/** + * @brief Sets the RTC counter value. + * @param CounterValue: RTC counter new value. + * @retval None + */ +void RTC_SetCounter(uint32_t CounterValue) +{ + RTC_EnterConfigMode(); + /* Set RTC COUNTER MSB word */ + RTC->CNTH = CounterValue >> 16; + /* Set RTC COUNTER LSB word */ + RTC->CNTL = (CounterValue & RTC_LSB_MASK); + RTC_ExitConfigMode(); +} + +/** + * @brief Sets the RTC prescaler value. + * @param PrescalerValue: RTC prescaler new value. + * @retval None + */ +void RTC_SetPrescaler(uint32_t PrescalerValue) +{ + /* Check the parameters */ + assert_param(IS_RTC_PRESCALER(PrescalerValue)); + + RTC_EnterConfigMode(); + /* Set RTC PRESCALER MSB word */ + RTC->PRLH = (PrescalerValue & PRLH_MSB_MASK) >> 16; + /* Set RTC PRESCALER LSB word */ + RTC->PRLL = (PrescalerValue & RTC_LSB_MASK); + RTC_ExitConfigMode(); +} + +/** + * @brief Sets the RTC alarm value. + * @param AlarmValue: RTC alarm new value. + * @retval None + */ +void RTC_SetAlarm(uint32_t AlarmValue) +{ + RTC_EnterConfigMode(); + /* Set the ALARM MSB word */ + RTC->ALRH = AlarmValue >> 16; + /* Set the ALARM LSB word */ + RTC->ALRL = (AlarmValue & RTC_LSB_MASK); + RTC_ExitConfigMode(); +} + +/** + * @brief Gets the RTC divider value. + * @param None + * @retval RTC Divider value. + */ +uint32_t RTC_GetDivider(void) +{ + uint32_t tmp = 0x00; + tmp = ((uint32_t)RTC->DIVH & (uint32_t)0x000F) << 16; + tmp |= RTC->DIVL; + return tmp; +} + +/** + * @brief Waits until last write operation on RTC registers has finished. + * @note This function must be called before any write to RTC registers. + * @param None + * @retval None + */ +void RTC_WaitForLastTask(void) +{ + /* Loop until RTOFF flag is set */ + while ((RTC->CRL & RTC_FLAG_RTOFF) == (uint16_t)RESET) + { + } +} + +/** + * @brief Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL) + * are synchronized with RTC APB clock. + * @note This function must be called before any read operation after an APB reset + * or an APB clock stop. + * @param None + * @retval None + */ +void RTC_WaitForSynchro(void) +{ + /* Clear RSF flag */ + RTC->CRL &= (uint16_t)~RTC_FLAG_RSF; + /* Loop until RSF flag is set */ + while ((RTC->CRL & RTC_FLAG_RSF) == (uint16_t)RESET) + { + } +} + +/** + * @brief Checks whether the specified RTC flag is set or not. + * @param RTC_FLAG: specifies the flag to check. + * This parameter can be one the following values: + * @arg RTC_FLAG_RTOFF: RTC Operation OFF flag + * @arg RTC_FLAG_RSF: Registers Synchronized flag + * @arg RTC_FLAG_OW: Overflow flag + * @arg RTC_FLAG_ALR: Alarm flag + * @arg RTC_FLAG_SEC: Second flag + * @retval The new state of RTC_FLAG (SET or RESET). + */ +FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_RTC_GET_FLAG(RTC_FLAG)); + + if ((RTC->CRL & RTC_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the RTC's pending flags. + * @param RTC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg RTC_FLAG_RSF: Registers Synchronized flag. This flag is cleared only after + * an APB reset or an APB Clock stop. + * @arg RTC_FLAG_OW: Overflow flag + * @arg RTC_FLAG_ALR: Alarm flag + * @arg RTC_FLAG_SEC: Second flag + * @retval None + */ +void RTC_ClearFlag(uint16_t RTC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG)); + + /* Clear the corresponding RTC flag */ + RTC->CRL &= (uint16_t)~RTC_FLAG; +} + +/** + * @brief Checks whether the specified RTC interrupt has occurred or not. + * @param RTC_IT: specifies the RTC interrupts sources to check. + * This parameter can be one of the following values: + * @arg RTC_IT_OW: Overflow interrupt + * @arg RTC_IT_ALR: Alarm interrupt + * @arg RTC_IT_SEC: Second interrupt + * @retval The new state of the RTC_IT (SET or RESET). + */ +ITStatus RTC_GetITStatus(uint16_t RTC_IT) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RTC_GET_IT(RTC_IT)); + + bitstatus = (ITStatus)(RTC->CRL & RTC_IT); + if (((RTC->CRH & RTC_IT) != (uint16_t)RESET) && (bitstatus != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the RTC's interrupt pending bits. + * @param RTC_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg RTC_IT_OW: Overflow interrupt + * @arg RTC_IT_ALR: Alarm interrupt + * @arg RTC_IT_SEC: Second interrupt + * @retval None + */ +void RTC_ClearITPendingBit(uint16_t RTC_IT) +{ + /* Check the parameters */ + assert_param(IS_RTC_IT(RTC_IT)); + + /* Clear the corresponding RTC pending bit */ + RTC->CRL &= (uint16_t)~RTC_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_sdio.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_sdio.c new file mode 100644 index 0000000..bc1719d --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_sdio.c @@ -0,0 +1,799 @@ +/** + ****************************************************************************** + * @file stm32f10x_sdio.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the SDIO firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_sdio.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup SDIO + * @brief SDIO driver modules + * @{ + */ + +/** @defgroup SDIO_Private_TypesDefinitions + * @{ + */ + +/* ------------ SDIO registers bit address in the alias region ----------- */ +#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) + +/* --- CLKCR Register ---*/ + +/* Alias word address of CLKEN bit */ +#define CLKCR_OFFSET (SDIO_OFFSET + 0x04) +#define CLKEN_BitNumber 0x08 +#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4)) + +/* --- CMD Register ---*/ + +/* Alias word address of SDIOSUSPEND bit */ +#define CMD_OFFSET (SDIO_OFFSET + 0x0C) +#define SDIOSUSPEND_BitNumber 0x0B +#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4)) + +/* Alias word address of ENCMDCOMPL bit */ +#define ENCMDCOMPL_BitNumber 0x0C +#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4)) + +/* Alias word address of NIEN bit */ +#define NIEN_BitNumber 0x0D +#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4)) + +/* Alias word address of ATACMD bit */ +#define ATACMD_BitNumber 0x0E +#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4)) + +/* --- DCTRL Register ---*/ + +/* Alias word address of DMAEN bit */ +#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C) +#define DMAEN_BitNumber 0x03 +#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4)) + +/* Alias word address of RWSTART bit */ +#define RWSTART_BitNumber 0x08 +#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4)) + +/* Alias word address of RWSTOP bit */ +#define RWSTOP_BitNumber 0x09 +#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4)) + +/* Alias word address of RWMOD bit */ +#define RWMOD_BitNumber 0x0A +#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4)) + +/* Alias word address of SDIOEN bit */ +#define SDIOEN_BitNumber 0x0B +#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4)) + +/* ---------------------- SDIO registers bit mask ------------------------ */ + +/* --- CLKCR Register ---*/ + +/* CLKCR register clear mask */ +#define CLKCR_CLEAR_MASK ((uint32_t)0xFFFF8100) + +/* --- PWRCTRL Register ---*/ + +/* SDIO PWRCTRL Mask */ +#define PWR_PWRCTRL_MASK ((uint32_t)0xFFFFFFFC) + +/* --- DCTRL Register ---*/ + +/* SDIO DCTRL Clear Mask */ +#define DCTRL_CLEAR_MASK ((uint32_t)0xFFFFFF08) + +/* --- CMD Register ---*/ + +/* CMD Register clear mask */ +#define CMD_CLEAR_MASK ((uint32_t)0xFFFFF800) + +/* SDIO RESP Registers Address */ +#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14)) + +/** + * @} + */ + +/** @defgroup SDIO_Private_Defines + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the SDIO peripheral registers to their default reset values. + * @param None + * @retval None + */ +void SDIO_DeInit(void) +{ + SDIO->POWER = 0x00000000; + SDIO->CLKCR = 0x00000000; + SDIO->ARG = 0x00000000; + SDIO->CMD = 0x00000000; + SDIO->DTIMER = 0x00000000; + SDIO->DLEN = 0x00000000; + SDIO->DCTRL = 0x00000000; + SDIO->ICR = 0x00C007FF; + SDIO->MASK = 0x00000000; +} + +/** + * @brief Initializes the SDIO peripheral according to the specified + * parameters in the SDIO_InitStruct. + * @param SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure + * that contains the configuration information for the SDIO peripheral. + * @retval None + */ +void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge)); + assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass)); + assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave)); + assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide)); + assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl)); + +/*---------------------------- SDIO CLKCR Configuration ------------------------*/ + /* Get the SDIO CLKCR value */ + tmpreg = SDIO->CLKCR; + + /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */ + tmpreg &= CLKCR_CLEAR_MASK; + + /* Set CLKDIV bits according to SDIO_ClockDiv value */ + /* Set PWRSAV bit according to SDIO_ClockPowerSave value */ + /* Set BYPASS bit according to SDIO_ClockBypass value */ + /* Set WIDBUS bits according to SDIO_BusWide value */ + /* Set NEGEDGE bits according to SDIO_ClockEdge value */ + /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */ + tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv | SDIO_InitStruct->SDIO_ClockPowerSave | + SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide | + SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl); + + /* Write to SDIO CLKCR */ + SDIO->CLKCR = tmpreg; +} + +/** + * @brief Fills each SDIO_InitStruct member with its default value. + * @param SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which + * will be initialized. + * @retval None + */ +void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct) +{ + /* SDIO_InitStruct members default value */ + SDIO_InitStruct->SDIO_ClockDiv = 0x00; + SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising; + SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable; + SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; + SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b; + SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; +} + +/** + * @brief Enables or disables the SDIO Clock. + * @param NewState: new state of the SDIO Clock. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_ClockCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CLKCR_CLKEN_BB = (uint32_t)NewState; +} + +/** + * @brief Sets the power status of the controller. + * @param SDIO_PowerState: new state of the Power state. + * This parameter can be one of the following values: + * @arg SDIO_PowerState_OFF + * @arg SDIO_PowerState_ON + * @retval None + */ +void SDIO_SetPowerState(uint32_t SDIO_PowerState) +{ + /* Check the parameters */ + assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState)); + + SDIO->POWER &= PWR_PWRCTRL_MASK; + SDIO->POWER |= SDIO_PowerState; +} + +/** + * @brief Gets the power status of the controller. + * @param None + * @retval Power status of the controller. The returned value can + * be one of the following: + * - 0x00: Power OFF + * - 0x02: Power UP + * - 0x03: Power ON + */ +uint32_t SDIO_GetPowerState(void) +{ + return (SDIO->POWER & (~PWR_PWRCTRL_MASK)); +} + +/** + * @brief Enables or disables the SDIO interrupts. + * @param SDIO_IT: specifies the SDIO interrupt sources to be enabled or disabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @param NewState: new state of the specified SDIO interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SDIO_IT(SDIO_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the SDIO interrupts */ + SDIO->MASK |= SDIO_IT; + } + else + { + /* Disable the SDIO interrupts */ + SDIO->MASK &= ~SDIO_IT; + } +} + +/** + * @brief Enables or disables the SDIO DMA request. + * @param NewState: new state of the selected SDIO DMA request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_DMACmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_DMAEN_BB = (uint32_t)NewState; +} + +/** + * @brief Initializes the SDIO Command according to the specified + * parameters in the SDIO_CmdInitStruct and send the command. + * @param SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef + * structure that contains the configuration information for the SDIO command. + * @retval None + */ +void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex)); + assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response)); + assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait)); + assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM)); + +/*---------------------------- SDIO ARG Configuration ------------------------*/ + /* Set the SDIO Argument value */ + SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument; + +/*---------------------------- SDIO CMD Configuration ------------------------*/ + /* Get the SDIO CMD value */ + tmpreg = SDIO->CMD; + /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */ + tmpreg &= CMD_CLEAR_MASK; + /* Set CMDINDEX bits according to SDIO_CmdIndex value */ + /* Set WAITRESP bits according to SDIO_Response value */ + /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */ + /* Set CPSMEN bits according to SDIO_CPSM value */ + tmpreg |= (uint32_t)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response + | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM; + + /* Write to SDIO CMD */ + SDIO->CMD = tmpreg; +} + +/** + * @brief Fills each SDIO_CmdInitStruct member with its default value. + * @param SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef + * structure which will be initialized. + * @retval None + */ +void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct) +{ + /* SDIO_CmdInitStruct members default value */ + SDIO_CmdInitStruct->SDIO_Argument = 0x00; + SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00; + SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No; + SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No; + SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable; +} + +/** + * @brief Returns command index of last command for which response received. + * @param None + * @retval Returns the command index of the last command response received. + */ +uint8_t SDIO_GetCommandResponse(void) +{ + return (uint8_t)(SDIO->RESPCMD); +} + +/** + * @brief Returns response received from the card for the last command. + * @param SDIO_RESP: Specifies the SDIO response register. + * This parameter can be one of the following values: + * @arg SDIO_RESP1: Response Register 1 + * @arg SDIO_RESP2: Response Register 2 + * @arg SDIO_RESP3: Response Register 3 + * @arg SDIO_RESP4: Response Register 4 + * @retval The Corresponding response register value. + */ +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_RESP(SDIO_RESP)); + + tmp = SDIO_RESP_ADDR + SDIO_RESP; + + return (*(__IO uint32_t *) tmp); +} + +/** + * @brief Initializes the SDIO data path according to the specified + * parameters in the SDIO_DataInitStruct. + * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure that + * contains the configuration information for the SDIO command. + * @retval None + */ +void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength)); + assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize)); + assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir)); + assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode)); + assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM)); + +/*---------------------------- SDIO DTIMER Configuration ---------------------*/ + /* Set the SDIO Data TimeOut value */ + SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut; + +/*---------------------------- SDIO DLEN Configuration -----------------------*/ + /* Set the SDIO DataLength value */ + SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength; + +/*---------------------------- SDIO DCTRL Configuration ----------------------*/ + /* Get the SDIO DCTRL value */ + tmpreg = SDIO->DCTRL; + /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */ + tmpreg &= DCTRL_CLEAR_MASK; + /* Set DEN bit according to SDIO_DPSM value */ + /* Set DTMODE bit according to SDIO_TransferMode value */ + /* Set DTDIR bit according to SDIO_TransferDir value */ + /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */ + tmpreg |= (uint32_t)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir + | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM; + + /* Write to SDIO DCTRL */ + SDIO->DCTRL = tmpreg; +} + +/** + * @brief Fills each SDIO_DataInitStruct member with its default value. + * @param SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef structure which + * will be initialized. + * @retval None + */ +void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct) +{ + /* SDIO_DataInitStruct members default value */ + SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF; + SDIO_DataInitStruct->SDIO_DataLength = 0x00; + SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b; + SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard; + SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block; + SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable; +} + +/** + * @brief Returns number of remaining data bytes to be transferred. + * @param None + * @retval Number of remaining data bytes to be transferred + */ +uint32_t SDIO_GetDataCounter(void) +{ + return SDIO->DCOUNT; +} + +/** + * @brief Read one data word from Rx FIFO. + * @param None + * @retval Data received + */ +uint32_t SDIO_ReadData(void) +{ + return SDIO->FIFO; +} + +/** + * @brief Write one data word to Tx FIFO. + * @param Data: 32-bit data word to write. + * @retval None + */ +void SDIO_WriteData(uint32_t Data) +{ + SDIO->FIFO = Data; +} + +/** + * @brief Returns the number of words left to be written to or read from FIFO. + * @param None + * @retval Remaining number of words. + */ +uint32_t SDIO_GetFIFOCount(void) +{ + return SDIO->FIFOCNT; +} + +/** + * @brief Starts the SD I/O Read Wait operation. + * @param NewState: new state of the Start SDIO Read Wait operation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_StartSDIOReadWait(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_RWSTART_BB = (uint32_t) NewState; +} + +/** + * @brief Stops the SD I/O Read Wait operation. + * @param NewState: new state of the Stop SDIO Read Wait operation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_StopSDIOReadWait(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_RWSTOP_BB = (uint32_t) NewState; +} + +/** + * @brief Sets one of the two options of inserting read wait interval. + * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode. + * This parameter can be: + * @arg SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK + * @arg SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2 + * @retval None + */ +void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode) +{ + /* Check the parameters */ + assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode)); + + *(__IO uint32_t *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode; +} + +/** + * @brief Enables or disables the SD I/O Mode Operation. + * @param NewState: new state of SDIO specific operation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_SetSDIOOperation(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_SDIOEN_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the SD I/O Mode suspend command sending. + * @param NewState: new state of the SD I/O Mode suspend command. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_SendSDIOSuspendCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_SDIOSUSPEND_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the command completion signal. + * @param NewState: new state of command completion signal. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_CommandCompletionCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_ENCMDCOMPL_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the CE-ATA interrupt. + * @param NewState: new state of CE-ATA interrupt. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_CEATAITCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)((~((uint32_t)NewState)) & ((uint32_t)0x1)); +} + +/** + * @brief Sends CE-ATA command (CMD61). + * @param NewState: new state of CE-ATA command. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_SendCEATACmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_ATACMD_BB = (uint32_t)NewState; +} + +/** + * @brief Checks whether the specified SDIO flag is set or not. + * @param SDIO_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide + * bus mode. + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_CMDACT: Command transfer in progress + * @arg SDIO_FLAG_TXACT: Data transmit in progress + * @arg SDIO_FLAG_RXACT: Data receive in progress + * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full + * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO + * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval The new state of SDIO_FLAG (SET or RESET). + */ +FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_SDIO_FLAG(SDIO_FLAG)); + + if ((SDIO->STA & SDIO_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the SDIO's pending flags. + * @param SDIO_FLAG: specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide + * bus mode + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +void SDIO_ClearFlag(uint32_t SDIO_FLAG) +{ + /* Check the parameters */ + assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG)); + + SDIO->ICR = SDIO_FLAG; +} + +/** + * @brief Checks whether the specified SDIO interrupt has occurred or not. + * @param SDIO_IT: specifies the SDIO interrupt source to check. + * This parameter can be one of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval The new state of SDIO_IT (SET or RESET). + */ +ITStatus SDIO_GetITStatus(uint32_t SDIO_IT) +{ + ITStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_SDIO_GET_IT(SDIO_IT)); + if ((SDIO->STA & SDIO_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the SDIO's interrupt pending bits. + * @param SDIO_IT: specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +void SDIO_ClearITPendingBit(uint32_t SDIO_IT) +{ + /* Check the parameters */ + assert_param(IS_SDIO_CLEAR_IT(SDIO_IT)); + + SDIO->ICR = SDIO_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_spi.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_spi.c new file mode 100644 index 0000000..4ec65b2 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_spi.c @@ -0,0 +1,908 @@ +/** + ****************************************************************************** + * @file stm32f10x_spi.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the SPI firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_spi.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup SPI + * @brief SPI driver modules + * @{ + */ + +/** @defgroup SPI_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + + +/** @defgroup SPI_Private_Defines + * @{ + */ + +/* SPI SPE mask */ +#define CR1_SPE_Set ((uint16_t)0x0040) +#define CR1_SPE_Reset ((uint16_t)0xFFBF) + +/* I2S I2SE mask */ +#define I2SCFGR_I2SE_Set ((uint16_t)0x0400) +#define I2SCFGR_I2SE_Reset ((uint16_t)0xFBFF) + +/* SPI CRCNext mask */ +#define CR1_CRCNext_Set ((uint16_t)0x1000) + +/* SPI CRCEN mask */ +#define CR1_CRCEN_Set ((uint16_t)0x2000) +#define CR1_CRCEN_Reset ((uint16_t)0xDFFF) + +/* SPI SSOE mask */ +#define CR2_SSOE_Set ((uint16_t)0x0004) +#define CR2_SSOE_Reset ((uint16_t)0xFFFB) + +/* SPI registers Masks */ +#define CR1_CLEAR_Mask ((uint16_t)0x3040) +#define I2SCFGR_CLEAR_Mask ((uint16_t)0xF040) + +/* SPI or I2S mode selection masks */ +#define SPI_Mode_Select ((uint16_t)0xF7FF) +#define I2S_Mode_Select ((uint16_t)0x0800) + +/* I2S clock source selection masks */ +#define I2S2_CLOCK_SRC ((uint32_t)(0x00020000)) +#define I2S3_CLOCK_SRC ((uint32_t)(0x00040000)) +#define I2S_MUL_MASK ((uint32_t)(0x0000F000)) +#define I2S_DIV_MASK ((uint32_t)(0x000000F0)) + +/** + * @} + */ + +/** @defgroup SPI_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the SPIx peripheral registers to their default + * reset values (Affects also the I2Ss). + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval None + */ +void SPI_I2S_DeInit(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + if (SPIx == SPI1) + { + /* Enable SPI1 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE); + /* Release SPI1 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE); + } + else if (SPIx == SPI2) + { + /* Enable SPI2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE); + /* Release SPI2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE); + } + else + { + if (SPIx == SPI3) + { + /* Enable SPI3 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE); + /* Release SPI3 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE); + } + } +} + +/** + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the SPI_InitStruct. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral. + * @retval None + */ +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct) +{ + uint16_t tmpreg = 0; + + /* check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Check the SPI parameters */ + assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction)); + assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode)); + assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize)); + assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL)); + assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA)); + assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit)); + assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial)); + +/*---------------------------- SPIx CR1 Configuration ------------------------*/ + /* Get the SPIx CR1 value */ + tmpreg = SPIx->CR1; + /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */ + tmpreg &= CR1_CLEAR_Mask; + /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler + master/salve mode, CPOL and CPHA */ + /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */ + /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */ + /* Set LSBFirst bit according to SPI_FirstBit value */ + /* Set BR bits according to SPI_BaudRatePrescaler value */ + /* Set CPOL bit according to SPI_CPOL value */ + /* Set CPHA bit according to SPI_CPHA value */ + tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode | + SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL | + SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS | + SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit); + /* Write to SPIx CR1 */ + SPIx->CR1 = tmpreg; + + /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ + SPIx->I2SCFGR &= SPI_Mode_Select; + +/*---------------------------- SPIx CRCPOLY Configuration --------------------*/ + /* Write to SPIx CRCPOLY */ + SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial; +} + +/** + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the I2S_InitStruct. + * @param SPIx: where x can be 2 or 3 to select the SPI peripheral + * (configured in I2S mode). + * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral + * configured in I2S mode. + * @note + * The function calculates the optimal prescaler needed to obtain the most + * accurate audio frequency (depending on the I2S clock source, the PLL values + * and the product configuration). But in case the prescaler value is greater + * than 511, the default value (0x02) will be configured instead. * + * @retval None + */ +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct) +{ + uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1; + uint32_t tmp = 0; + RCC_ClocksTypeDef RCC_Clocks; + uint32_t sourceclock = 0; + + /* Check the I2S parameters */ + assert_param(IS_SPI_23_PERIPH(SPIx)); + assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); + assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); + assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); + assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput)); + assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq)); + assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); + +/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask; + SPIx->I2SPR = 0x0002; + + /* Get the I2SCFGR register value */ + tmpreg = SPIx->I2SCFGR; + + /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ + if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) + { + i2sodd = (uint16_t)0; + i2sdiv = (uint16_t)2; + } + /* If the requested audio frequency is not the default, compute the prescaler */ + else + { + /* Check the frame length (For the Prescaler computing) */ + if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) + { + /* Packet length is 16 bits */ + packetlength = 1; + } + else + { + /* Packet length is 32 bits */ + packetlength = 2; + } + + /* Get the I2S clock source mask depending on the peripheral number */ + if(((uint32_t)SPIx) == SPI2_BASE) + { + /* The mask is relative to I2S2 */ + tmp = I2S2_CLOCK_SRC; + } + else + { + /* The mask is relative to I2S3 */ + tmp = I2S3_CLOCK_SRC; + } + + /* Check the I2S clock source configuration depending on the Device: + Only Connectivity line devices have the PLL3 VCO clock */ +#ifdef STM32F10X_CL + if((RCC->CFGR2 & tmp) != 0) + { + /* Get the configuration bits of RCC PLL3 multiplier */ + tmp = (uint32_t)((RCC->CFGR2 & I2S_MUL_MASK) >> 12); + + /* Get the value of the PLL3 multiplier */ + if((tmp > 5) && (tmp < 15)) + { + /* Multiplier is between 8 and 14 (value 15 is forbidden) */ + tmp += 2; + } + else + { + if (tmp == 15) + { + /* Multiplier is 20 */ + tmp = 20; + } + } + /* Get the PREDIV2 value */ + sourceclock = (uint32_t)(((RCC->CFGR2 & I2S_DIV_MASK) >> 4) + 1); + + /* Calculate the Source Clock frequency based on PLL3 and PREDIV2 values */ + sourceclock = (uint32_t) ((HSE_Value / sourceclock) * tmp * 2); + } + else + { + /* I2S Clock source is System clock: Get System Clock frequency */ + RCC_GetClocksFreq(&RCC_Clocks); + + /* Get the source clock value: based on System Clock value */ + sourceclock = RCC_Clocks.SYSCLK_Frequency; + } +#else /* STM32F10X_HD */ + /* I2S Clock source is System clock: Get System Clock frequency */ + RCC_GetClocksFreq(&RCC_Clocks); + + /* Get the source clock value: based on System Clock value */ + sourceclock = RCC_Clocks.SYSCLK_Frequency; +#endif /* STM32F10X_CL */ + + /* Compute the Real divider depending on the MCLK output state with a floating point */ + if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) + { + /* MCLK output is enabled */ + tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + else + { + /* MCLK output is disabled */ + tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + + /* Remove the floating point */ + tmp = tmp / 10; + + /* Check the parity of the divider */ + i2sodd = (uint16_t)(tmp & (uint16_t)0x0001); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint16_t)((tmp - i2sodd) / 2); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (uint16_t) (i2sodd << 8); + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2) || (i2sdiv > 0xFF)) + { + /* Set the default values */ + i2sdiv = 2; + i2sodd = 0; + } + + /* Write to SPIx I2SPR register the computed value */ + SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput)); + + /* Configure the I2S with the SPI_InitStruct values */ + tmpreg |= (uint16_t)(I2S_Mode_Select | (uint16_t)(I2S_InitStruct->I2S_Mode | \ + (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \ + (uint16_t)I2S_InitStruct->I2S_CPOL)))); + + /* Write to SPIx I2SCFGR */ + SPIx->I2SCFGR = tmpreg; +} + +/** + * @brief Fills each SPI_InitStruct member with its default value. + * @param SPI_InitStruct : pointer to a SPI_InitTypeDef structure which will be initialized. + * @retval None + */ +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct) +{ +/*--------------- Reset SPI init structure parameters values -----------------*/ + /* Initialize the SPI_Direction member */ + SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex; + /* initialize the SPI_Mode member */ + SPI_InitStruct->SPI_Mode = SPI_Mode_Slave; + /* initialize the SPI_DataSize member */ + SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b; + /* Initialize the SPI_CPOL member */ + SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low; + /* Initialize the SPI_CPHA member */ + SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge; + /* Initialize the SPI_NSS member */ + SPI_InitStruct->SPI_NSS = SPI_NSS_Hard; + /* Initialize the SPI_BaudRatePrescaler member */ + SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; + /* Initialize the SPI_FirstBit member */ + SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB; + /* Initialize the SPI_CRCPolynomial member */ + SPI_InitStruct->SPI_CRCPolynomial = 7; +} + +/** + * @brief Fills each I2S_InitStruct member with its default value. + * @param I2S_InitStruct : pointer to a I2S_InitTypeDef structure which will be initialized. + * @retval None + */ +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct) +{ +/*--------------- Reset I2S init structure parameters values -----------------*/ + /* Initialize the I2S_Mode member */ + I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx; + + /* Initialize the I2S_Standard member */ + I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips; + + /* Initialize the I2S_DataFormat member */ + I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b; + + /* Initialize the I2S_MCLKOutput member */ + I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable; + + /* Initialize the I2S_AudioFreq member */ + I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default; + + /* Initialize the I2S_CPOL member */ + I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low; +} + +/** + * @brief Enables or disables the specified SPI peripheral. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI peripheral */ + SPIx->CR1 |= CR1_SPE_Set; + } + else + { + /* Disable the selected SPI peripheral */ + SPIx->CR1 &= CR1_SPE_Reset; + } +} + +/** + * @brief Enables or disables the specified SPI peripheral (in I2S mode). + * @param SPIx: where x can be 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_23_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI peripheral (in I2S mode) */ + SPIx->I2SCFGR |= I2SCFGR_I2SE_Set; + } + else + { + /* Disable the selected SPI peripheral (in I2S mode) */ + SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset; + } +} + +/** + * @brief Enables or disables the specified SPI/I2S interrupts. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to be enabled or disabled. + * This parameter can be one of the following values: + * @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask + * @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask + * @arg SPI_I2S_IT_ERR: Error interrupt mask + * @param NewState: new state of the specified SPI/I2S interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState) +{ + uint16_t itpos = 0, itmask = 0 ; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT)); + + /* Get the SPI/I2S IT index */ + itpos = SPI_I2S_IT >> 4; + + /* Set the IT mask */ + itmask = (uint16_t)1 << (uint16_t)itpos; + + if (NewState != DISABLE) + { + /* Enable the selected SPI/I2S interrupt */ + SPIx->CR2 |= itmask; + } + else + { + /* Disable the selected SPI/I2S interrupt */ + SPIx->CR2 &= (uint16_t)~itmask; + } +} + +/** + * @brief Enables or disables the SPIx/I2Sx DMA interface. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request + * @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request + * @param NewState: new state of the selected SPI/I2S DMA transfer request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq)); + if (NewState != DISABLE) + { + /* Enable the selected SPI/I2S DMA requests */ + SPIx->CR2 |= SPI_I2S_DMAReq; + } + else + { + /* Disable the selected SPI/I2S DMA requests */ + SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq; + } +} + +/** + * @brief Transmits a Data through the SPIx/I2Sx peripheral. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param Data : Data to be transmitted. + * @retval None + */ +void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Write in the DR register the data to be sent */ + SPIx->DR = Data; +} + +/** + * @brief Returns the most recent received data by the SPIx/I2Sx peripheral. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @retval The value of the received data. + */ +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Return the data in the DR register */ + return SPIx->DR; +} + +/** + * @brief Configures internally by software the NSS pin for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_NSSInternalSoft: specifies the SPI NSS internal state. + * This parameter can be one of the following values: + * @arg SPI_NSSInternalSoft_Set: Set NSS pin internally + * @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally + * @retval None + */ +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft)); + if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset) + { + /* Set NSS pin internally by software */ + SPIx->CR1 |= SPI_NSSInternalSoft_Set; + } + else + { + /* Reset NSS pin internally by software */ + SPIx->CR1 &= SPI_NSSInternalSoft_Reset; + } +} + +/** + * @brief Enables or disables the SS output for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx SS output. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI SS output */ + SPIx->CR2 |= CR2_SSOE_Set; + } + else + { + /* Disable the selected SPI SS output */ + SPIx->CR2 &= CR2_SSOE_Reset; + } +} + +/** + * @brief Configures the data size for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_DataSize: specifies the SPI data size. + * This parameter can be one of the following values: + * @arg SPI_DataSize_16b: Set data frame format to 16bit + * @arg SPI_DataSize_8b: Set data frame format to 8bit + * @retval None + */ +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_DATASIZE(SPI_DataSize)); + /* Clear DFF bit */ + SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b; + /* Set new DFF bit value */ + SPIx->CR1 |= SPI_DataSize; +} + +/** + * @brief Transmit the SPIx CRC value. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval None + */ +void SPI_TransmitCRC(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Enable the selected SPI CRC transmission */ + SPIx->CR1 |= CR1_CRCNext_Set; +} + +/** + * @brief Enables or disables the CRC value calculation of the transferred bytes. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx CRC value calculation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI CRC calculation */ + SPIx->CR1 |= CR1_CRCEN_Set; + } + else + { + /* Disable the selected SPI CRC calculation */ + SPIx->CR1 &= CR1_CRCEN_Reset; + } +} + +/** + * @brief Returns the transmit or the receive CRC register value for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_CRC: specifies the CRC register to be read. + * This parameter can be one of the following values: + * @arg SPI_CRC_Tx: Selects Tx CRC register + * @arg SPI_CRC_Rx: Selects Rx CRC register + * @retval The selected CRC register value.. + */ +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC) +{ + uint16_t crcreg = 0; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_CRC(SPI_CRC)); + if (SPI_CRC != SPI_CRC_Rx) + { + /* Get the Tx CRC register */ + crcreg = SPIx->TXCRCR; + } + else + { + /* Get the Rx CRC register */ + crcreg = SPIx->RXCRCR; + } + /* Return the selected CRC register */ + return crcreg; +} + +/** + * @brief Returns the CRC Polynomial register value for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval The CRC Polynomial register value. + */ +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Return the CRC polynomial register */ + return SPIx->CRCPR; +} + +/** + * @brief Selects the data transfer direction in bi-directional mode for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_Direction: specifies the data transfer direction in bi-directional mode. + * This parameter can be one of the following values: + * @arg SPI_Direction_Tx: Selects Tx transmission direction + * @arg SPI_Direction_Rx: Selects Rx receive direction + * @retval None + */ +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_DIRECTION(SPI_Direction)); + if (SPI_Direction == SPI_Direction_Tx) + { + /* Set the Tx only mode */ + SPIx->CR1 |= SPI_Direction_Tx; + } + else + { + /* Set the Rx only mode */ + SPIx->CR1 &= SPI_Direction_Rx; + } +} + +/** + * @brief Checks whether the specified SPI/I2S flag is set or not. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_FLAG: specifies the SPI/I2S flag to check. + * This parameter can be one of the following values: + * @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag. + * @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag. + * @arg SPI_I2S_FLAG_BSY: Busy flag. + * @arg SPI_I2S_FLAG_OVR: Overrun flag. + * @arg SPI_FLAG_MODF: Mode Fault flag. + * @arg SPI_FLAG_CRCERR: CRC Error flag. + * @arg I2S_FLAG_UDR: Underrun Error flag. + * @arg I2S_FLAG_CHSIDE: Channel Side flag. + * @retval The new state of SPI_I2S_FLAG (SET or RESET). + */ +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG)); + /* Check the status of the specified SPI/I2S flag */ + if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET) + { + /* SPI_I2S_FLAG is set */ + bitstatus = SET; + } + else + { + /* SPI_I2S_FLAG is reset */ + bitstatus = RESET; + } + /* Return the SPI_I2S_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the SPIx CRC Error (CRCERR) flag. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * @param SPI_I2S_FLAG: specifies the SPI flag to clear. + * This function clears only CRCERR flag. + * @note + * - OVR (OverRun error) flag is cleared by software sequence: a read + * operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read + * operation to SPI_SR register (SPI_I2S_GetFlagStatus()). + * - UDR (UnderRun error) flag is cleared by a read operation to + * SPI_SR register (SPI_I2S_GetFlagStatus()). + * - MODF (Mode Fault) flag is cleared by software sequence: a read/write + * operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a + * write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI). + * @retval None + */ +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG)); + + /* Clear the selected SPI CRC Error (CRCERR) flag */ + SPIx->SR = (uint16_t)~SPI_I2S_FLAG; +} + +/** + * @brief Checks whether the specified SPI/I2S interrupt has occurred or not. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt. + * @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt. + * @arg SPI_I2S_IT_OVR: Overrun interrupt. + * @arg SPI_IT_MODF: Mode Fault interrupt. + * @arg SPI_IT_CRCERR: CRC Error interrupt. + * @arg I2S_IT_UDR: Underrun Error interrupt. + * @retval The new state of SPI_I2S_IT (SET or RESET). + */ +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itpos = 0, itmask = 0, enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT)); + + /* Get the SPI/I2S IT index */ + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + + /* Get the SPI/I2S IT mask */ + itmask = SPI_I2S_IT >> 4; + + /* Set the IT mask */ + itmask = 0x01 << itmask; + + /* Get the SPI_I2S_IT enable bit status */ + enablestatus = (SPIx->CR2 & itmask) ; + + /* Check the status of the specified SPI/I2S interrupt */ + if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus) + { + /* SPI_I2S_IT is set */ + bitstatus = SET; + } + else + { + /* SPI_I2S_IT is reset */ + bitstatus = RESET; + } + /* Return the SPI_I2S_IT status */ + return bitstatus; +} + +/** + * @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear. + * This function clears only CRCERR interrupt pending bit. + * @note + * - OVR (OverRun Error) interrupt pending bit is cleared by software + * sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData()) + * followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()). + * - UDR (UnderRun Error) interrupt pending bit is cleared by a read + * operation to SPI_SR register (SPI_I2S_GetITStatus()). + * - MODF (Mode Fault) interrupt pending bit is cleared by software sequence: + * a read/write operation to SPI_SR register (SPI_I2S_GetITStatus()) + * followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable + * the SPI). + * @retval None + */ +void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) +{ + uint16_t itpos = 0; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT)); + + /* Get the SPI IT index */ + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + + /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */ + SPIx->SR = (uint16_t)~itpos; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_tim.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_tim.c new file mode 100644 index 0000000..bfb4dd1 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_tim.c @@ -0,0 +1,2890 @@ +/** + ****************************************************************************** + * @file stm32f10x_tim.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the TIM firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_tim.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup TIM + * @brief TIM driver modules + * @{ + */ + +/** @defgroup TIM_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Defines + * @{ + */ + +/* ---------------------- TIM registers bit mask ------------------------ */ +#define SMCR_ETR_Mask ((uint16_t)0x00FF) +#define CCMR_Offset ((uint16_t)0x0018) +#define CCER_CCE_Set ((uint16_t)0x0001) +#define CCER_CCNE_Set ((uint16_t)0x0004) + +/** + * @} + */ + +/** @defgroup TIM_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_FunctionPrototypes + * @{ + */ + +static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +/** + * @} + */ + +/** @defgroup TIM_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the TIMx peripheral registers to their default reset values. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @retval None + */ +void TIM_DeInit(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + if (TIMx == TIM1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); + } + else if (TIMx == TIM2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); + } + else if (TIMx == TIM3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); + } + else if (TIMx == TIM4) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); + } + else if (TIMx == TIM5) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE); + } + else if (TIMx == TIM6) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE); + } + else if (TIMx == TIM7) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE); + } + else if (TIMx == TIM8) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE); + } + else if (TIMx == TIM9) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE); + } + else if (TIMx == TIM10) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE); + } + else if (TIMx == TIM11) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE); + } + else if (TIMx == TIM12) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE); + } + else if (TIMx == TIM13) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE); + } + else if (TIMx == TIM14) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE); + } + else if (TIMx == TIM15) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE); + } + else if (TIMx == TIM16) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE); + } + else + { + if (TIMx == TIM17) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE); + } + } +} + +/** + * @brief Initializes the TIMx Time Base Unit peripheral according to + * the specified parameters in the TIM_TimeBaseInitStruct. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef + * structure that contains the configuration information for the + * specified TIM peripheral. + * @retval None + */ +void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) +{ + uint16_t tmpcr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); + assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); + + tmpcr1 = TIMx->CR1; + + if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)|| + (TIMx == TIM4) || (TIMx == TIM5)) + { + /* Select the Counter Mode */ + tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS))); + tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode; + } + + if((TIMx != TIM6) && (TIMx != TIM7)) + { + /* Set the clock division */ + tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD)); + tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision; + } + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; + + /* Set the Prescaler value */ + TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; + + if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler and the Repetition counter + values immediately */ + TIMx->EGR = TIM_PSCReloadMode_Immediate; +} + +/** + * @brief Initializes the TIMx Channel1 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint16_t)(~(uint16_t)TIM_CCER_CC1E); + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC1M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC1S)); + + /* Select the Output Compare Mode */ + tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1P)); + /* Set the Output Compare Polarity */ + tmpccer |= TIM_OCInitStruct->TIM_OCPolarity; + + /* Set the Output State */ + tmpccer |= TIM_OCInitStruct->TIM_OutputState; + + if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| + (TIMx == TIM16)|| (TIMx == TIM17)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NP)); + /* Set the Output N Polarity */ + tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity; + + /* Reset the Output N State */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NE)); + /* Set the Output N State */ + tmpccer |= TIM_OCInitStruct->TIM_OutputNState; + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1N)); + + /* Set the Output Idle state */ + tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState; + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel2 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select + * the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC2E)); + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC2M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S)); + + /* Select the Output Compare Mode */ + tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2P)); + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4); + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NP)); + /* Set the Output N Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4); + + /* Reset the Output N State */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NE)); + /* Set the Output N State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2N)); + + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2); + /* Set the Output N Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel3 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC3E)); + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC3M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC3S)); + /* Select the Output Compare Mode */ + tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3P)); + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8); + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NP)); + /* Set the Output N Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8); + /* Reset the Output N State */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NE)); + + /* Set the Output N State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8); + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3N)); + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4); + /* Set the Output N Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel4 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 2: Reset the CC4E Bit */ + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC4E)); + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC4M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC4S)); + + /* Select the Output Compare Mode */ + tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC4P)); + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12); + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + /* Reset the Output Compare IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS4)); + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIM peripheral according to the specified + * parameters in the TIM_ICInitStruct. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel)); + assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter)); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity)); + } + else + { + assert_param(IS_TIM_IC_POLARITY_LITE(TIM_ICInitStruct->TIM_ICPolarity)); + } + if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) + { + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + /* TI1 Configuration */ + TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2) + { + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* TI2 Configuration */ + TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3) + { + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* TI3 Configuration */ + TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else + { + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* TI4 Configuration */ + TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } +} + +/** + * @brief Configures the TIM peripheral according to the specified + * parameters in the TIM_ICInitStruct to measure an external PWM signal. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + uint16_t icoppositepolarity = TIM_ICPolarity_Rising; + uint16_t icoppositeselection = TIM_ICSelection_DirectTI; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Select the Opposite Input Polarity */ + if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising) + { + icoppositepolarity = TIM_ICPolarity_Falling; + } + else + { + icoppositepolarity = TIM_ICPolarity_Rising; + } + /* Select the Opposite Input */ + if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI) + { + icoppositeselection = TIM_ICSelection_IndirectTI; + } + else + { + icoppositeselection = TIM_ICSelection_DirectTI; + } + if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) + { + /* TI1 Configuration */ + TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + /* TI2 Configuration */ + TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else + { + /* TI2 Configuration */ + TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + /* TI1 Configuration */ + TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } +} + +/** + * @brief Configures the: Break feature, dead time, Lock level, the OSSI, + * the OSSR State and the AOE(automatic output enable). + * @param TIMx: where x can be 1 or 8 to select the TIM + * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @retval None + */ +void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState)); + assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState)); + assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel)); + assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break)); + assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput)); + /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState | + TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime | + TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity | + TIM_BDTRInitStruct->TIM_AutomaticOutput; +} + +/** + * @brief Fills each TIM_TimeBaseInitStruct member with its default value. + * @param TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef + * structure which will be initialized. + * @retval None + */ +void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) +{ + /* Set the default configuration */ + TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF; + TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000; + TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1; + TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up; + TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000; +} + +/** + * @brief Fills each TIM_OCInitStruct member with its default value. + * @param TIM_OCInitStruct : pointer to a TIM_OCInitTypeDef structure which will + * be initialized. + * @retval None + */ +void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + /* Set the default configuration */ + TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing; + TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable; + TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable; + TIM_OCInitStruct->TIM_Pulse = 0x0000; + TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High; + TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High; + TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset; + TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset; +} + +/** + * @brief Fills each TIM_ICInitStruct member with its default value. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will + * be initialized. + * @retval None + */ +void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + /* Set the default configuration */ + TIM_ICInitStruct->TIM_Channel = TIM_Channel_1; + TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising; + TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI; + TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1; + TIM_ICInitStruct->TIM_ICFilter = 0x00; +} + +/** + * @brief Fills each TIM_BDTRInitStruct member with its default value. + * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which + * will be initialized. + * @retval None + */ +void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct) +{ + /* Set the default configuration */ + TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable; + TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable; + TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF; + TIM_BDTRInitStruct->TIM_DeadTime = 0x00; + TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable; + TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low; + TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable; +} + +/** + * @brief Enables or disables the specified TIM peripheral. + * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral. + * @param NewState: new state of the TIMx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the TIM Counter */ + TIMx->CR1 |= TIM_CR1_CEN; + } + else + { + /* Disable the TIM Counter */ + TIMx->CR1 &= (uint16_t)(~((uint16_t)TIM_CR1_CEN)); + } +} + +/** + * @brief Enables or disables the TIM peripheral Main Outputs. + * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral. + * @param NewState: new state of the TIM peripheral Main Outputs. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the TIM Main Output */ + TIMx->BDTR |= TIM_BDTR_MOE; + } + else + { + /* Disable the TIM Main Output */ + TIMx->BDTR &= (uint16_t)(~((uint16_t)TIM_BDTR_MOE)); + } +} + +/** + * @brief Enables or disables the specified TIM interrupts. + * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral. + * @param TIM_IT: specifies the TIM interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg TIM_IT_Update: TIM update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * @note + * - TIM6 and TIM7 can only generate an update interrupt. + * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, + * TIM_IT_CC2 or TIM_IT_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. + * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @param NewState: new state of the TIM interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_IT(TIM_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Interrupt sources */ + TIMx->DIER |= TIM_IT; + } + else + { + /* Disable the Interrupt sources */ + TIMx->DIER &= (uint16_t)~TIM_IT; + } +} + +/** + * @brief Configures the TIMx event to be generate by software. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_EventSource: specifies the event source. + * This parameter can be one or more of the following values: + * @arg TIM_EventSource_Update: Timer update Event source + * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EventSource_COM: Timer COM event source + * @arg TIM_EventSource_Trigger: Timer Trigger Event source + * @arg TIM_EventSource_Break: Timer Break event source + * @note + * - TIM6 and TIM7 can only generate an update event. + * - TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8. + * @retval None + */ +void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource)); + + /* Set the event sources */ + TIMx->EGR = TIM_EventSource; +} + +/** + * @brief Configures the TIMx's DMA interface. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select + * the TIM peripheral. + * @param TIM_DMABase: DMA Base address. + * This parameter can be one of the following values: + * @arg TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR, + * TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR, + * TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER, + * TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR, + * TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2, + * TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR, + * TIM_DMABase_DCR. + * @param TIM_DMABurstLength: DMA Burst length. + * This parameter can be one value between: + * TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers. + * @retval None + */ +void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_DMA_BASE(TIM_DMABase)); + assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength)); + /* Set the DMA Base and the DMA Burst Length */ + TIMx->DCR = TIM_DMABase | TIM_DMABurstLength; +} + +/** + * @brief Enables or disables the TIMx's DMA Requests. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 15, 16 or 17 + * to select the TIM peripheral. + * @param TIM_DMASource: specifies the DMA Request sources. + * This parameter can be any combination of the following values: + * @arg TIM_DMA_Update: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_Trigger: TIM Trigger DMA source + * @param NewState: new state of the DMA Request sources. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST9_PERIPH(TIMx)); + assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the DMA sources */ + TIMx->DIER |= TIM_DMASource; + } + else + { + /* Disable the DMA sources */ + TIMx->DIER &= (uint16_t)~TIM_DMASource; + } +} + +/** + * @brief Configures the TIMx internal Clock + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 + * to select the TIM peripheral. + * @retval None + */ +void TIM_InternalClockConfig(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Disable slave mode to clock the prescaler directly with the internal clock */ + TIMx->SMCR &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); +} + +/** + * @brief Configures the TIMx Internal Trigger as External Clock + * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ITRSource: Trigger source. + * This parameter can be one of the following values: + * @param TIM_TS_ITR0: Internal Trigger 0 + * @param TIM_TS_ITR1: Internal Trigger 1 + * @param TIM_TS_ITR2: Internal Trigger 2 + * @param TIM_TS_ITR3: Internal Trigger 3 + * @retval None + */ +void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource)); + /* Select the Internal Trigger */ + TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource); + /* Select the External clock mode1 */ + TIMx->SMCR |= TIM_SlaveMode_External1; +} + +/** + * @brief Configures the TIMx Trigger as External Clock + * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_TIxExternalCLKSource: Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector + * @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1 + * @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2 + * @param TIM_ICPolarity: specifies the TIx Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param ICFilter : specifies the filter value. + * This parameter must be a value between 0x0 and 0xF. + * @retval None + */ +void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, + uint16_t TIM_ICPolarity, uint16_t ICFilter) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_TIXCLK_SOURCE(TIM_TIxExternalCLKSource)); + assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity)); + assert_param(IS_TIM_IC_FILTER(ICFilter)); + /* Configure the Timer Input Clock Source */ + if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2) + { + TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); + } + else + { + TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); + } + /* Select the Trigger source */ + TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource); + /* Select the External clock mode1 */ + TIMx->SMCR |= TIM_SlaveMode_External1; +} + +/** + * @brief Configures the External clock Mode1 + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter) +{ + uint16_t tmpsmcr = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + /* Configure the ETR Clock source */ + TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the SMS Bits */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); + /* Select the External clock mode1 */ + tmpsmcr |= TIM_SlaveMode_External1; + /* Select the Trigger selection : ETRF */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS)); + tmpsmcr |= TIM_TS_ETRF; + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Configures the External clock Mode2 + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + /* Configure the ETR Clock source */ + TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); + /* Enable the External clock mode2 */ + TIMx->SMCR |= TIM_SMCR_ECE; +} + +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter) +{ + uint16_t tmpsmcr = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + tmpsmcr = TIMx->SMCR; + /* Reset the ETR Bits */ + tmpsmcr &= SMCR_ETR_Mask; + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8))); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Configures the TIMx Prescaler. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param Prescaler: specifies the Prescaler Register value + * @param TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode + * This parameter can be one of the following values: + * @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event. + * @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediately. + * @retval None + */ +void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode)); + /* Set the Prescaler value */ + TIMx->PSC = Prescaler; + /* Set or reset the UG Bit */ + TIMx->EGR = TIM_PSCReloadMode; +} + +/** + * @brief Specifies the TIMx Counter Mode to be used. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_CounterMode: specifies the Counter Mode to be used + * This parameter can be one of the following values: + * @arg TIM_CounterMode_Up: TIM Up Counting Mode + * @arg TIM_CounterMode_Down: TIM Down Counting Mode + * @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1 + * @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2 + * @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3 + * @retval None + */ +void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode) +{ + uint16_t tmpcr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode)); + tmpcr1 = TIMx->CR1; + /* Reset the CMS and DIR Bits */ + tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS))); + /* Set the Counter Mode */ + tmpcr1 |= TIM_CounterMode; + /* Write to TIMx CR1 register */ + TIMx->CR1 = tmpcr1; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_InputTriggerSource: The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) +{ + uint16_t tmpsmcr = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource)); + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS)); + /* Set the Input Trigger source */ + tmpsmcr |= TIM_InputTriggerSource; + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Configures the TIMx Encoder Interface. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_EncoderMode: specifies the TIMx Encoder Mode. + * This parameter can be one of the following values: + * @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level. + * @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level. + * @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending + * on the level of the other input. + * @param TIM_IC1Polarity: specifies the IC1 Polarity + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Falling: IC Falling edge. + * @arg TIM_ICPolarity_Rising: IC Rising edge. + * @param TIM_IC2Polarity: specifies the IC2 Polarity + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Falling: IC Falling edge. + * @arg TIM_ICPolarity_Rising: IC Rising edge. + * @retval None + */ +void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, + uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity) +{ + uint16_t tmpsmcr = 0; + uint16_t tmpccmr1 = 0; + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST5_PERIPH(TIMx)); + assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode)); + assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity)); + assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity)); + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Set the encoder Mode */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); + tmpsmcr |= TIM_EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S))); + tmpccmr1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0; + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCER_CC1P)) & ((uint16_t)~((uint16_t)TIM_CCER_CC2P))); + tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4)); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Forces the TIMx output 1 waveform to active or inactive level. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC1REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF. + * @retval None + */ +void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1M Bits */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1M); + /* Configure The Forced output Mode */ + tmpccmr1 |= TIM_ForcedAction; + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Forces the TIMx output 2 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC2REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF. + * @retval None + */ +void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2M Bits */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2M); + /* Configure The Forced output Mode */ + tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8); + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Forces the TIMx output 3 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC3REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF. + * @retval None + */ +void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC1M Bits */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3M); + /* Configure The Forced output Mode */ + tmpccmr2 |= TIM_ForcedAction; + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Forces the TIMx output 4 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC4REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF. + * @retval None + */ +void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC2M Bits */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4M); + /* Configure The Forced output Mode */ + tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8); + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Enables or disables TIMx peripheral Preload register on ARR. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param NewState: new state of the TIMx peripheral Preload register + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the ARR Preload Bit */ + TIMx->CR1 |= TIM_CR1_ARPE; + } + else + { + /* Reset the ARR Preload Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_ARPE); + } +} + +/** + * @brief Selects the TIM peripheral Commutation event. + * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral + * @param NewState: new state of the Commutation event. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the COM Bit */ + TIMx->CR2 |= TIM_CR2_CCUS; + } + else + { + /* Reset the COM Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCUS); + } +} + +/** + * @brief Selects the TIMx peripheral Capture Compare DMA source. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select + * the TIM peripheral. + * @param NewState: new state of the Capture Compare DMA source + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the CCDS Bit */ + TIMx->CR2 |= TIM_CR2_CCDS; + } + else + { + /* Reset the CCDS Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCDS); + } +} + +/** + * @brief Sets or Resets the TIM peripheral Capture Compare Preload Control bit. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8 or 15 + * to select the TIMx peripheral + * @param NewState: new state of the Capture Compare Preload Control bit + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST5_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the CCPC Bit */ + TIMx->CR2 |= TIM_CR2_CCPC; + } + else + { + /* Reset the CCPC Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCPC); + } +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR1. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1PE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr1 |= TIM_OCPreload; + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR2. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select + * the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2PE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8); + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR3. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC3PE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr2 |= TIM_OCPreload; + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR4. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC4PE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8); + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx Output Compare 1 Fast feature. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1FE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr1 |= TIM_OCFast; + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Configures the TIMx Output Compare 2 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select + * the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2FE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr1 |= (uint16_t)(TIM_OCFast << 8); + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Configures the TIMx Output Compare 3 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC3FE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr2 |= TIM_OCFast; + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx Output Compare 4 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC4FE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr2 |= (uint16_t)(TIM_OCFast << 8); + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Clears or safeguards the OCREF1 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + + tmpccmr1 = TIMx->CCMR1; + + /* Reset the OC1CE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr1 |= TIM_OCClear; + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Clears or safeguards the OCREF2 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2CE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr1 |= (uint16_t)(TIM_OCClear << 8); + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Clears or safeguards the OCREF3 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC3CE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr2 |= TIM_OCClear; + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Clears or safeguards the OCREF4 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC4CE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr2 |= (uint16_t)(TIM_OCClear << 8); + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx channel 1 polarity. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC1 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + tmpccer = TIMx->CCER; + /* Set or Reset the CC1P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1P); + tmpccer |= TIM_OCPolarity; + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 1N polarity. + * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC1N Polarity + * This parameter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC1NP Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1NP); + tmpccer |= TIM_OCNPolarity; + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 2 polarity. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC2 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + tmpccer = TIMx->CCER; + /* Set or Reset the CC2P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 4); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 2N polarity. + * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC2N Polarity + * This parameter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC2NP Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2NP); + tmpccer |= (uint16_t)(TIM_OCNPolarity << 4); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 3 polarity. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC3 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + tmpccer = TIMx->CCER; + /* Set or Reset the CC3P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 8); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 3N polarity. + * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC3N Polarity + * This parameter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC3NP Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3NP); + tmpccer |= (uint16_t)(TIM_OCNPolarity << 8); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 4 polarity. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC4 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + tmpccer = TIMx->CCER; + /* Set or Reset the CC4P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC4P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 12); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @arg TIM_Channel_4: TIM Channel 4 + * @param TIM_CCx: specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable. + * @retval None + */ +void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx) +{ + uint16_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_CCX(TIM_CCx)); + + tmp = CCER_CCE_Set << TIM_Channel; + + /* Reset the CCxE Bit */ + TIMx->CCER &= (uint16_t)~ tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel); +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @param TIM_CCxN: specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable. + * @retval None + */ +void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN) +{ + uint16_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_CCXN(TIM_CCxN)); + + tmp = CCER_CCNE_Set << TIM_Channel; + + /* Reset the CCxNE Bit */ + TIMx->CCER &= (uint16_t) ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel); +} + +/** + * @brief Selects the TIM Output Compare Mode. + * @note This function disables the selected channel before changing the Output + * Compare Mode. + * User has to enable this channel using TIM_CCxCmd and TIM_CCxNCmd functions. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @arg TIM_Channel_4: TIM Channel 4 + * @param TIM_OCMode: specifies the TIM Output Compare Mode. + * This parameter can be one of the following values: + * @arg TIM_OCMode_Timing + * @arg TIM_OCMode_Active + * @arg TIM_OCMode_Toggle + * @arg TIM_OCMode_PWM1 + * @arg TIM_OCMode_PWM2 + * @arg TIM_ForcedAction_Active + * @arg TIM_ForcedAction_InActive + * @retval None + */ +void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode) +{ + uint32_t tmp = 0; + uint16_t tmp1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_OCM(TIM_OCMode)); + + tmp = (uint32_t) TIMx; + tmp += CCMR_Offset; + + tmp1 = CCER_CCE_Set << (uint16_t)TIM_Channel; + + /* Disable the Channel: Reset the CCxE Bit */ + TIMx->CCER &= (uint16_t) ~tmp1; + + if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3)) + { + tmp += (TIM_Channel>>1); + + /* Reset the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC1M); + + /* Configure the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp |= TIM_OCMode; + } + else + { + tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1; + + /* Reset the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC2M); + + /* Configure the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8); + } +} + +/** + * @brief Enables or Disables the TIMx Update event. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param NewState: new state of the TIMx UDIS bit + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the Update Disable Bit */ + TIMx->CR1 |= TIM_CR1_UDIS; + } + else + { + /* Reset the Update Disable Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_UDIS); + } +} + +/** + * @brief Configures the TIMx Update Request Interrupt source. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_UpdateSource: specifies the Update source. + * This parameter can be one of the following values: + * @arg TIM_UpdateSource_Regular: Source of update is the counter overflow/underflow + or the setting of UG bit, or an update generation + through the slave mode controller. + * @arg TIM_UpdateSource_Global: Source of update is counter overflow/underflow. + * @retval None + */ +void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource)); + if (TIM_UpdateSource != TIM_UpdateSource_Global) + { + /* Set the URS Bit */ + TIMx->CR1 |= TIM_CR1_URS; + } + else + { + /* Reset the URS Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_URS); + } +} + +/** + * @brief Enables or disables the TIMx's Hall sensor interface. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param NewState: new state of the TIMx Hall sensor interface. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the TI1S Bit */ + TIMx->CR2 |= TIM_CR2_TI1S; + } + else + { + /* Reset the TI1S Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_TI1S); + } +} + +/** + * @brief Selects the TIMx's One Pulse Mode. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_OPMode: specifies the OPM Mode to be used. + * This parameter can be one of the following values: + * @arg TIM_OPMode_Single + * @arg TIM_OPMode_Repetitive + * @retval None + */ +void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_OPM_MODE(TIM_OPMode)); + /* Reset the OPM Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_OPM); + /* Configure the OPM Mode */ + TIMx->CR1 |= TIM_OPMode; +} + +/** + * @brief Selects the TIMx Trigger Output Mode. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_TRGOSource: specifies the Trigger Output source. + * This paramter can be one of the following values: + * + * - For all TIMx + * @arg TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_Update: The update event is selected as the trigger output (TRGO). + * + * - For all TIMx except TIM6 and TIM7 + * @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag + * is to be set, as soon as a capture or compare match occurs (TRGO). + * @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output (TRGO). + * + * @retval None + */ +void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST7_PERIPH(TIMx)); + assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource)); + /* Reset the MMS Bits */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_MMS); + /* Select the TRGO source */ + TIMx->CR2 |= TIM_TRGOSource; +} + +/** + * @brief Selects the TIMx Slave Mode. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_SlaveMode: specifies the Timer Slave Mode. + * This parameter can be one of the following values: + * @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal (TRGI) re-initializes + * the counter and triggers an update of the registers. + * @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high. + * @arg TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI. + * @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter. + * @retval None + */ +void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode)); + /* Reset the SMS Bits */ + TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_SMS); + /* Select the Slave Mode */ + TIMx->SMCR |= TIM_SlaveMode; +} + +/** + * @brief Sets or Resets the TIMx Master/Slave Mode. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode. + * This parameter can be one of the following values: + * @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer + * and its slaves (through TRGO). + * @arg TIM_MasterSlaveMode_Disable: No action + * @retval None + */ +void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode)); + /* Reset the MSM Bit */ + TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_MSM); + + /* Set or Reset the MSM Bit */ + TIMx->SMCR |= TIM_MasterSlaveMode; +} + +/** + * @brief Sets the TIMx Counter Register value + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param Counter: specifies the Counter register new value. + * @retval None + */ +void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + /* Set the Counter Register value */ + TIMx->CNT = Counter; +} + +/** + * @brief Sets the TIMx Autoreload Register value + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param Autoreload: specifies the Autoreload register new value. + * @retval None + */ +void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + /* Set the Autoreload Register value */ + TIMx->ARR = Autoreload; +} + +/** + * @brief Sets the TIMx Capture Compare1 Register value + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param Compare1: specifies the Capture Compare1 register new value. + * @retval None + */ +void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + /* Set the Capture Compare1 Register value */ + TIMx->CCR1 = Compare1; +} + +/** + * @brief Sets the TIMx Capture Compare2 Register value + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param Compare2: specifies the Capture Compare2 register new value. + * @retval None + */ +void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Set the Capture Compare2 Register value */ + TIMx->CCR2 = Compare2; +} + +/** + * @brief Sets the TIMx Capture Compare3 Register value + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param Compare3: specifies the Capture Compare3 register new value. + * @retval None + */ +void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* Set the Capture Compare3 Register value */ + TIMx->CCR3 = Compare3; +} + +/** + * @brief Sets the TIMx Capture Compare4 Register value + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param Compare4: specifies the Capture Compare4 register new value. + * @retval None + */ +void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* Set the Capture Compare4 Register value */ + TIMx->CCR4 = Compare4; +} + +/** + * @brief Sets the TIMx Input Capture 1 prescaler. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture1 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + /* Reset the IC1PSC Bits */ + TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC1PSC); + /* Set the IC1PSC value */ + TIMx->CCMR1 |= TIM_ICPSC; +} + +/** + * @brief Sets the TIMx Input Capture 2 prescaler. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture2 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + /* Reset the IC2PSC Bits */ + TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC2PSC); + /* Set the IC2PSC value */ + TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8); +} + +/** + * @brief Sets the TIMx Input Capture 3 prescaler. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture3 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + /* Reset the IC3PSC Bits */ + TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC3PSC); + /* Set the IC3PSC value */ + TIMx->CCMR2 |= TIM_ICPSC; +} + +/** + * @brief Sets the TIMx Input Capture 4 prescaler. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + /* Reset the IC4PSC Bits */ + TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC4PSC); + /* Set the IC4PSC value */ + TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8); +} + +/** + * @brief Sets the TIMx Clock Division value. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select + * the TIM peripheral. + * @param TIM_CKD: specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CKD_DIV1: TDTS = Tck_tim + * @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim + * @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim + * @retval None + */ +void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_CKD_DIV(TIM_CKD)); + /* Reset the CKD Bits */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_CKD); + /* Set the CKD value */ + TIMx->CR1 |= TIM_CKD; +} + +/** + * @brief Gets the TIMx Input Capture 1 value. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @retval Capture Compare 1 Register value. + */ +uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + /* Get the Capture 1 Register value */ + return TIMx->CCR1; +} + +/** + * @brief Gets the TIMx Input Capture 2 value. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @retval Capture Compare 2 Register value. + */ +uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Get the Capture 2 Register value */ + return TIMx->CCR2; +} + +/** + * @brief Gets the TIMx Input Capture 3 value. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @retval Capture Compare 3 Register value. + */ +uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* Get the Capture 3 Register value */ + return TIMx->CCR3; +} + +/** + * @brief Gets the TIMx Input Capture 4 value. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @retval Capture Compare 4 Register value. + */ +uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* Get the Capture 4 Register value */ + return TIMx->CCR4; +} + +/** + * @brief Gets the TIMx Counter value. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @retval Counter Register value. + */ +uint16_t TIM_GetCounter(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + /* Get the Counter Register value */ + return TIMx->CNT; +} + +/** + * @brief Gets the TIMx Prescaler value. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @retval Prescaler Register value. + */ +uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + /* Get the Prescaler Register value */ + return TIMx->PSC; +} + +/** + * @brief Checks whether the specified TIM flag is set or not. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_Update: TIM update Flag + * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag + * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag + * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag + * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag + * @arg TIM_FLAG_COM: TIM Commutation Flag + * @arg TIM_FLAG_Trigger: TIM Trigger Flag + * @arg TIM_FLAG_Break: TIM Break Flag + * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag + * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag + * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag + * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag + * @note + * - TIM6 and TIM7 can have only one update flag. + * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1, + * TIM_FLAG_CC2 or TIM_FLAG_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1. + * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @retval The new state of TIM_FLAG (SET or RESET). + */ +FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_GET_FLAG(TIM_FLAG)); + + if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the TIMx's pending flags. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_FLAG: specifies the flag bit to clear. + * This parameter can be any combination of the following values: + * @arg TIM_FLAG_Update: TIM update Flag + * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag + * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag + * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag + * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag + * @arg TIM_FLAG_COM: TIM Commutation Flag + * @arg TIM_FLAG_Trigger: TIM Trigger Flag + * @arg TIM_FLAG_Break: TIM Break Flag + * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag + * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag + * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag + * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag + * @note + * - TIM6 and TIM7 can have only one update flag. + * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1, + * TIM_FLAG_CC2 or TIM_FLAG_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1. + * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @retval None + */ +void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_CLEAR_FLAG(TIM_FLAG)); + + /* Clear the flags */ + TIMx->SR = (uint16_t)~TIM_FLAG; +} + +/** + * @brief Checks whether the TIM interrupt has occurred or not. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_IT: specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_Update: TIM update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * @note + * - TIM6 and TIM7 can generate only an update interrupt. + * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, + * TIM_IT_CC2 or TIM_IT_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. + * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @retval The new state of the TIM_IT(SET or RESET). + */ +ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itstatus = 0x0, itenable = 0x0; + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_GET_IT(TIM_IT)); + + itstatus = TIMx->SR & TIM_IT; + + itenable = TIMx->DIER & TIM_IT; + if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the TIMx's interrupt pending bits. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_IT: specifies the pending bit to clear. + * This parameter can be any combination of the following values: + * @arg TIM_IT_Update: TIM1 update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * @note + * - TIM6 and TIM7 can generate only an update interrupt. + * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, + * TIM_IT_CC2 or TIM_IT_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. + * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @retval None + */ +void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_IT(TIM_IT)); + /* Clear the IT pending Bit */ + TIMx->SR = (uint16_t)~TIM_IT; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr1 = 0, tmpccer = 0; + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC1E); + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + /* Select the Input and set the filter */ + tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC1F))); + tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E); + } + else + { + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P | TIM_CCER_CC1NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E); + } + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0; + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC2E); + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 4); + /* Select the Input and set the filter */ + tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC2S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC2F))); + tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12); + tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC2E); + } + else + { + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P | TIM_CCER_CC2NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC2E); + } + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC3E); + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 8); + /* Select the Input and set the filter */ + tmpccmr2 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR2_CC3S)) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC3F))); + tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC3E); + } + else + { + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC3NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC3E); + } + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC4E); + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 12); + /* Select the Input and set the filter */ + tmpccmr2 &= (uint16_t)((uint16_t)(~(uint16_t)TIM_CCMR2_CC4S) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC4F))); + tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8); + tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC4P)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC4E); + } + else + { + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC4NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC4E); + } + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_usart.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_usart.c new file mode 100644 index 0000000..e794eae --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_usart.c @@ -0,0 +1,1058 @@ +/** + ****************************************************************************** + * @file stm32f10x_usart.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the USART firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_usart.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup USART + * @brief USART driver modules + * @{ + */ + +/** @defgroup USART_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Defines + * @{ + */ + +#define CR1_UE_Set ((uint16_t)0x2000) /*!< USART Enable Mask */ +#define CR1_UE_Reset ((uint16_t)0xDFFF) /*!< USART Disable Mask */ + +#define CR1_WAKE_Mask ((uint16_t)0xF7FF) /*!< USART WakeUp Method Mask */ + +#define CR1_RWU_Set ((uint16_t)0x0002) /*!< USART mute mode Enable Mask */ +#define CR1_RWU_Reset ((uint16_t)0xFFFD) /*!< USART mute mode Enable Mask */ +#define CR1_SBK_Set ((uint16_t)0x0001) /*!< USART Break Character send Mask */ +#define CR1_CLEAR_Mask ((uint16_t)0xE9F3) /*!< USART CR1 Mask */ +#define CR2_Address_Mask ((uint16_t)0xFFF0) /*!< USART address Mask */ + +#define CR2_LINEN_Set ((uint16_t)0x4000) /*!< USART LIN Enable Mask */ +#define CR2_LINEN_Reset ((uint16_t)0xBFFF) /*!< USART LIN Disable Mask */ + +#define CR2_LBDL_Mask ((uint16_t)0xFFDF) /*!< USART LIN Break detection Mask */ +#define CR2_STOP_CLEAR_Mask ((uint16_t)0xCFFF) /*!< USART CR2 STOP Bits Mask */ +#define CR2_CLOCK_CLEAR_Mask ((uint16_t)0xF0FF) /*!< USART CR2 Clock Mask */ + +#define CR3_SCEN_Set ((uint16_t)0x0020) /*!< USART SC Enable Mask */ +#define CR3_SCEN_Reset ((uint16_t)0xFFDF) /*!< USART SC Disable Mask */ + +#define CR3_NACK_Set ((uint16_t)0x0010) /*!< USART SC NACK Enable Mask */ +#define CR3_NACK_Reset ((uint16_t)0xFFEF) /*!< USART SC NACK Disable Mask */ + +#define CR3_HDSEL_Set ((uint16_t)0x0008) /*!< USART Half-Duplex Enable Mask */ +#define CR3_HDSEL_Reset ((uint16_t)0xFFF7) /*!< USART Half-Duplex Disable Mask */ + +#define CR3_IRLP_Mask ((uint16_t)0xFFFB) /*!< USART IrDA LowPower mode Mask */ +#define CR3_CLEAR_Mask ((uint16_t)0xFCFF) /*!< USART CR3 Mask */ + +#define CR3_IREN_Set ((uint16_t)0x0002) /*!< USART IrDA Enable Mask */ +#define CR3_IREN_Reset ((uint16_t)0xFFFD) /*!< USART IrDA Disable Mask */ +#define GTPR_LSB_Mask ((uint16_t)0x00FF) /*!< Guard Time Register LSB Mask */ +#define GTPR_MSB_Mask ((uint16_t)0xFF00) /*!< Guard Time Register MSB Mask */ +#define IT_Mask ((uint16_t)0x001F) /*!< USART Interrupt Mask */ + +/* USART OverSampling-8 Mask */ +#define CR1_OVER8_Set ((u16)0x8000) /* USART OVER8 mode Enable Mask */ +#define CR1_OVER8_Reset ((u16)0x7FFF) /* USART OVER8 mode Disable Mask */ + +/* USART One Bit Sampling Mask */ +#define CR3_ONEBITE_Set ((u16)0x0800) /* USART ONEBITE mode Enable Mask */ +#define CR3_ONEBITE_Reset ((u16)0xF7FF) /* USART ONEBITE mode Disable Mask */ + +/** + * @} + */ + +/** @defgroup USART_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the USARTx peripheral registers to their default reset values. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @retval None + */ +void USART_DeInit(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + if (USARTx == USART1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); + } + else if (USARTx == USART2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); + } + else if (USARTx == USART3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); + } + else if (USARTx == UART4) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); + } + else + { + if (USARTx == UART5) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE); + } + } +} + +/** + * @brief Initializes the USARTx peripheral according to the specified + * parameters in the USART_InitStruct . + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure + * that contains the configuration information for the specified USART + * peripheral. + * @retval None + */ +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) +{ + uint32_t tmpreg = 0x00, apbclock = 0x00; + uint32_t integerdivider = 0x00; + uint32_t fractionaldivider = 0x00; + uint32_t usartxbase = 0; + RCC_ClocksTypeDef RCC_ClocksStatus; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); + assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); + assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); + assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); + assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); + assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); + /* The hardware flow control is available only for USART1, USART2 and USART3 */ + if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + usartxbase = (uint32_t)USARTx; + +/*---------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = USARTx->CR2; + /* Clear STOP[13:12] bits */ + tmpreg &= CR2_STOP_CLEAR_Mask; + /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/ + /* Set STOP[13:12] bits according to USART_StopBits value */ + tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits; + + /* Write to USART CR2 */ + USARTx->CR2 = (uint16_t)tmpreg; + +/*---------------------------- USART CR1 Configuration -----------------------*/ + tmpreg = USARTx->CR1; + /* Clear M, PCE, PS, TE and RE bits */ + tmpreg &= CR1_CLEAR_Mask; + /* Configure the USART Word Length, Parity and mode ----------------------- */ + /* Set the M bits according to USART_WordLength value */ + /* Set PCE and PS bits according to USART_Parity value */ + /* Set TE and RE bits according to USART_Mode value */ + tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | + USART_InitStruct->USART_Mode; + /* Write to USART CR1 */ + USARTx->CR1 = (uint16_t)tmpreg; + +/*---------------------------- USART CR3 Configuration -----------------------*/ + tmpreg = USARTx->CR3; + /* Clear CTSE and RTSE bits */ + tmpreg &= CR3_CLEAR_Mask; + /* Configure the USART HFC -------------------------------------------------*/ + /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ + tmpreg |= USART_InitStruct->USART_HardwareFlowControl; + /* Write to USART CR3 */ + USARTx->CR3 = (uint16_t)tmpreg; + +/*---------------------------- USART BRR Configuration -----------------------*/ + /* Configure the USART Baud Rate -------------------------------------------*/ + RCC_GetClocksFreq(&RCC_ClocksStatus); + if (usartxbase == USART1_BASE) + { + apbclock = RCC_ClocksStatus.PCLK2_Frequency; + } + else + { + apbclock = RCC_ClocksStatus.PCLK1_Frequency; + } + + /* Determine the integer part */ + if ((USARTx->CR1 & CR1_OVER8_Set) != 0) + { + /* Integer part computing in case Oversampling mode is 8 Samples */ + integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate))); + } + else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ + { + /* Integer part computing in case Oversampling mode is 16 Samples */ + integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate))); + } + tmpreg = (integerdivider / 100) << 4; + + /* Determine the fractional part */ + fractionaldivider = integerdivider - (100 * (tmpreg >> 4)); + + /* Implement the fractional part in the register */ + if ((USARTx->CR1 & CR1_OVER8_Set) != 0) + { + tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07); + } + else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ + { + tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F); + } + + /* Write to USART BRR */ + USARTx->BRR = (uint16_t)tmpreg; +} + +/** + * @brief Fills each USART_InitStruct member with its default value. + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure + * which will be initialized. + * @retval None + */ +void USART_StructInit(USART_InitTypeDef* USART_InitStruct) +{ + /* USART_InitStruct members default value */ + USART_InitStruct->USART_BaudRate = 9600; + USART_InitStruct->USART_WordLength = USART_WordLength_8b; + USART_InitStruct->USART_StopBits = USART_StopBits_1; + USART_InitStruct->USART_Parity = USART_Parity_No ; + USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; +} + +/** + * @brief Initializes the USARTx peripheral Clock according to the + * specified parameters in the USART_ClockInitStruct . + * @param USARTx: where x can be 1, 2, 3 to select the USART peripheral. + * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef + * structure that contains the configuration information for the specified + * USART peripheral. + * @note The Smart Card and Synchronous modes are not available for UART4 and UART5. + * @retval None + */ +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) +{ + uint32_t tmpreg = 0x00; + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); + assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); + assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); + assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); + +/*---------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = USARTx->CR2; + /* Clear CLKEN, CPOL, CPHA and LBCL bits */ + tmpreg &= CR2_CLOCK_CLEAR_Mask; + /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/ + /* Set CLKEN bit according to USART_Clock value */ + /* Set CPOL bit according to USART_CPOL value */ + /* Set CPHA bit according to USART_CPHA value */ + /* Set LBCL bit according to USART_LastBit value */ + tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | + USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; + /* Write to USART CR2 */ + USARTx->CR2 = (uint16_t)tmpreg; +} + +/** + * @brief Fills each USART_ClockInitStruct member with its default value. + * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef + * structure which will be initialized. + * @retval None + */ +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) +{ + /* USART_ClockInitStruct members default value */ + USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; + USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; + USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; + USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; +} + +/** + * @brief Enables or disables the specified USART peripheral. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USARTx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected USART by setting the UE bit in the CR1 register */ + USARTx->CR1 |= CR1_UE_Set; + } + else + { + /* Disable the selected USART by clearing the UE bit in the CR1 register */ + USARTx->CR1 &= CR1_UE_Reset; + } +} + +/** + * @brief Enables or disables the specified USART interrupts. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @param NewState: new state of the specified USARTx interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState) +{ + uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00; + uint32_t usartxbase = 0x00; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CONFIG_IT(USART_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + usartxbase = (uint32_t)USARTx; + + /* Get the USART register index */ + usartreg = (((uint8_t)USART_IT) >> 0x05); + + /* Get the interrupt position */ + itpos = USART_IT & IT_Mask; + itmask = (((uint32_t)0x01) << itpos); + + if (usartreg == 0x01) /* The IT is in CR1 register */ + { + usartxbase += 0x0C; + } + else if (usartreg == 0x02) /* The IT is in CR2 register */ + { + usartxbase += 0x10; + } + else /* The IT is in CR3 register */ + { + usartxbase += 0x14; + } + if (NewState != DISABLE) + { + *(__IO uint32_t*)usartxbase |= itmask; + } + else + { + *(__IO uint32_t*)usartxbase &= ~itmask; + } +} + +/** + * @brief Enables or disables the USARTs DMA interface. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_DMAReq: specifies the DMA request. + * This parameter can be any combination of the following values: + * @arg USART_DMAReq_Tx: USART DMA transmit request + * @arg USART_DMAReq_Rx: USART DMA receive request + * @param NewState: new state of the DMA Request sources. + * This parameter can be: ENABLE or DISABLE. + * @note The DMA mode is not available for UART5 except in the STM32 + * High density value line devices(STM32F10X_HD_VL). + * @retval None + */ +void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DMAREQ(USART_DMAReq)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the DMA transfer for selected requests by setting the DMAT and/or + DMAR bits in the USART CR3 register */ + USARTx->CR3 |= USART_DMAReq; + } + else + { + /* Disable the DMA transfer for selected requests by clearing the DMAT and/or + DMAR bits in the USART CR3 register */ + USARTx->CR3 &= (uint16_t)~USART_DMAReq; + } +} + +/** + * @brief Sets the address of the USART node. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_Address: Indicates the address of the USART node. + * @retval None + */ +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_ADDRESS(USART_Address)); + + /* Clear the USART address */ + USARTx->CR2 &= CR2_Address_Mask; + /* Set the USART address node */ + USARTx->CR2 |= USART_Address; +} + +/** + * @brief Selects the USART WakeUp method. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_WakeUp: specifies the USART wakeup method. + * This parameter can be one of the following values: + * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection + * @arg USART_WakeUp_AddressMark: WakeUp by an address mark + * @retval None + */ +void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_WAKEUP(USART_WakeUp)); + + USARTx->CR1 &= CR1_WAKE_Mask; + USARTx->CR1 |= USART_WakeUp; +} + +/** + * @brief Determines if the USART is in mute mode or not. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART mute mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ + USARTx->CR1 |= CR1_RWU_Set; + } + else + { + /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ + USARTx->CR1 &= CR1_RWU_Reset; + } +} + +/** + * @brief Sets the USART LIN Break detection length. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_LINBreakDetectLength: specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg USART_LINBreakDetectLength_10b: 10-bit break detection + * @arg USART_LINBreakDetectLength_11b: 11-bit break detection + * @retval None + */ +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); + + USARTx->CR2 &= CR2_LBDL_Mask; + USARTx->CR2 |= USART_LINBreakDetectLength; +} + +/** + * @brief Enables or disables the USARTs LIN mode. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART LIN mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + USARTx->CR2 |= CR2_LINEN_Set; + } + else + { + /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ + USARTx->CR2 &= CR2_LINEN_Reset; + } +} + +/** + * @brief Transmits single data through the USARTx peripheral. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param Data: the data to transmit. + * @retval None + */ +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DATA(Data)); + + /* Transmit Data */ + USARTx->DR = (Data & (uint16_t)0x01FF); +} + +/** + * @brief Returns the most recent received data by the USARTx peripheral. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @retval The received data. + */ +uint16_t USART_ReceiveData(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Receive Data */ + return (uint16_t)(USARTx->DR & (uint16_t)0x01FF); +} + +/** + * @brief Transmits break characters. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @retval None + */ +void USART_SendBreak(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Send break characters */ + USARTx->CR1 |= CR1_SBK_Set; +} + +/** + * @brief Sets the specified USART guard time. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @param USART_GuardTime: specifies the guard time. + * @note The guard time bits are not available for UART4 and UART5. + * @retval None + */ +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + + /* Clear the USART Guard time */ + USARTx->GTPR &= GTPR_LSB_Mask; + /* Set the USART guard time */ + USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08); +} + +/** + * @brief Sets the system clock prescaler. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_Prescaler: specifies the prescaler clock. + * @note The function is used for IrDA mode with UART4 and UART5. + * @retval None + */ +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Clear the USART prescaler */ + USARTx->GTPR &= GTPR_MSB_Mask; + /* Set the USART prescaler */ + USARTx->GTPR |= USART_Prescaler; +} + +/** + * @brief Enables or disables the USARTs Smart Card mode. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @param NewState: new state of the Smart Card mode. + * This parameter can be: ENABLE or DISABLE. + * @note The Smart Card mode is not available for UART4 and UART5. + * @retval None + */ +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the SC mode by setting the SCEN bit in the CR3 register */ + USARTx->CR3 |= CR3_SCEN_Set; + } + else + { + /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ + USARTx->CR3 &= CR3_SCEN_Reset; + } +} + +/** + * @brief Enables or disables NACK transmission. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @param NewState: new state of the NACK transmission. + * This parameter can be: ENABLE or DISABLE. + * @note The Smart Card mode is not available for UART4 and UART5. + * @retval None + */ +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ + USARTx->CR3 |= CR3_NACK_Set; + } + else + { + /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ + USARTx->CR3 &= CR3_NACK_Reset; + } +} + +/** + * @brief Enables or disables the USARTs Half Duplex communication. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART Communication. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + USARTx->CR3 |= CR3_HDSEL_Set; + } + else + { + /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ + USARTx->CR3 &= CR3_HDSEL_Reset; + } +} + + +/** + * @brief Enables or disables the USART's 8x oversampling mode. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART one bit sampling method. + * This parameter can be: ENABLE or DISABLE. + * @note + * This function has to be called before calling USART_Init() + * function in order to have correct baudrate Divider value. + * @retval None + */ +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */ + USARTx->CR1 |= CR1_OVER8_Set; + } + else + { + /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */ + USARTx->CR1 &= CR1_OVER8_Reset; + } +} + +/** + * @brief Enables or disables the USART's one bit sampling method. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART one bit sampling method. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */ + USARTx->CR3 |= CR3_ONEBITE_Set; + } + else + { + /* Disable tthe one bit method by clearing the ONEBITE bit in the CR3 register */ + USARTx->CR3 &= CR3_ONEBITE_Reset; + } +} + +/** + * @brief Configures the USART's IrDA interface. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IrDAMode: specifies the IrDA mode. + * This parameter can be one of the following values: + * @arg USART_IrDAMode_LowPower + * @arg USART_IrDAMode_Normal + * @retval None + */ +void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); + + USARTx->CR3 &= CR3_IRLP_Mask; + USARTx->CR3 |= USART_IrDAMode; +} + +/** + * @brief Enables or disables the USART's IrDA interface. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the IrDA mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ + USARTx->CR3 |= CR3_IREN_Set; + } + else + { + /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ + USARTx->CR3 &= CR3_IREN_Reset; + } +} + +/** + * @brief Checks whether the specified USART flag is set or not. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) + * @arg USART_FLAG_LBD: LIN Break detection flag + * @arg USART_FLAG_TXE: Transmit data register empty flag + * @arg USART_FLAG_TC: Transmission Complete flag + * @arg USART_FLAG_RXNE: Receive data register not empty flag + * @arg USART_FLAG_IDLE: Idle Line detection flag + * @arg USART_FLAG_ORE: OverRun Error flag + * @arg USART_FLAG_NE: Noise Error flag + * @arg USART_FLAG_FE: Framing Error flag + * @arg USART_FLAG_PE: Parity Error flag + * @retval The new state of USART_FLAG (SET or RESET). + */ +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_FLAG(USART_FLAG)); + /* The CTS flag is not available for UART4 and UART5 */ + if (USART_FLAG == USART_FLAG_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the USARTx's pending flags. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). + * @arg USART_FLAG_LBD: LIN Break detection flag. + * @arg USART_FLAG_TC: Transmission Complete flag. + * @arg USART_FLAG_RXNE: Receive data register not empty flag. + * + * @note + * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) flags are cleared by software + * sequence: a read operation to USART_SR register (USART_GetFlagStatus()) + * followed by a read operation to USART_DR register (USART_ReceiveData()). + * - RXNE flag can be also cleared by a read to the USART_DR register + * (USART_ReceiveData()). + * - TC flag can be also cleared by software sequence: a read operation to + * USART_SR register (USART_GetFlagStatus()) followed by a write operation + * to USART_DR register (USART_SendData()). + * - TXE flag is cleared only by a write to the USART_DR register + * (USART_SendData()). + * @retval None + */ +void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); + /* The CTS flag is not available for UART4 and UART5 */ + if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + USARTx->SR = (uint16_t)~USART_FLAG; +} + +/** + * @brief Checks whether the specified USART interrupt has occurred or not. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IT: specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TXE: Tansmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_ORE: OverRun Error interrupt + * @arg USART_IT_NE: Noise Error interrupt + * @arg USART_IT_FE: Framing Error interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @retval The new state of USART_IT (SET or RESET). + */ +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT) +{ + uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00; + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_GET_IT(USART_IT)); + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + /* Get the USART register index */ + usartreg = (((uint8_t)USART_IT) >> 0x05); + /* Get the interrupt position */ + itmask = USART_IT & IT_Mask; + itmask = (uint32_t)0x01 << itmask; + + if (usartreg == 0x01) /* The IT is in CR1 register */ + { + itmask &= USARTx->CR1; + } + else if (usartreg == 0x02) /* The IT is in CR2 register */ + { + itmask &= USARTx->CR2; + } + else /* The IT is in CR3 register */ + { + itmask &= USARTx->CR3; + } + + bitpos = USART_IT >> 0x08; + bitpos = (uint32_t)0x01 << bitpos; + bitpos &= USARTx->SR; + if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/** + * @brief Clears the USARTx's interrupt pending bits. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IT: specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TC: Transmission complete interrupt. + * @arg USART_IT_RXNE: Receive Data register not empty interrupt. + * + * @note + * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) pending bits are cleared by + * software sequence: a read operation to USART_SR register + * (USART_GetITStatus()) followed by a read operation to USART_DR register + * (USART_ReceiveData()). + * - RXNE pending bit can be also cleared by a read to the USART_DR register + * (USART_ReceiveData()). + * - TC pending bit can be also cleared by software sequence: a read + * operation to USART_SR register (USART_GetITStatus()) followed by a write + * operation to USART_DR register (USART_SendData()). + * - TXE pending bit is cleared only by a write to the USART_DR register + * (USART_SendData()). + * @retval None + */ +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT) +{ + uint16_t bitpos = 0x00, itmask = 0x00; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLEAR_IT(USART_IT)); + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + bitpos = USART_IT >> 0x08; + itmask = ((uint16_t)0x01 << (uint16_t)bitpos); + USARTx->SR = (uint16_t)~itmask; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_wwdg.c b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_wwdg.c new file mode 100644 index 0000000..4a901e4 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/FWlib/src/stm32f10x_wwdg.c @@ -0,0 +1,224 @@ +/** + ****************************************************************************** + * @file stm32f10x_wwdg.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the WWDG firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_wwdg.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup WWDG + * @brief WWDG driver modules + * @{ + */ + +/** @defgroup WWDG_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Private_Defines + * @{ + */ + +/* ----------- WWDG registers bit address in the alias region ----------- */ +#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE) + +/* Alias word address of EWI bit */ +#define CFR_OFFSET (WWDG_OFFSET + 0x04) +#define EWI_BitNumber 0x09 +#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4)) + +/* --------------------- WWDG registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_WDGA_Set ((uint32_t)0x00000080) + +/* CFR register bit mask */ +#define CFR_WDGTB_Mask ((uint32_t)0xFFFFFE7F) +#define CFR_W_Mask ((uint32_t)0xFFFFFF80) +#define BIT_Mask ((uint8_t)0x7F) + +/** + * @} + */ + +/** @defgroup WWDG_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the WWDG peripheral registers to their default reset values. + * @param None + * @retval None + */ +void WWDG_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE); +} + +/** + * @brief Sets the WWDG Prescaler. + * @param WWDG_Prescaler: specifies the WWDG Prescaler. + * This parameter can be one of the following values: + * @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1 + * @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2 + * @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4 + * @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8 + * @retval None + */ +void WWDG_SetPrescaler(uint32_t WWDG_Prescaler) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler)); + /* Clear WDGTB[1:0] bits */ + tmpreg = WWDG->CFR & CFR_WDGTB_Mask; + /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */ + tmpreg |= WWDG_Prescaler; + /* Store the new value */ + WWDG->CFR = tmpreg; +} + +/** + * @brief Sets the WWDG window value. + * @param WindowValue: specifies the window value to be compared to the downcounter. + * This parameter value must be lower than 0x80. + * @retval None + */ +void WWDG_SetWindowValue(uint8_t WindowValue) +{ + __IO uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_WWDG_WINDOW_VALUE(WindowValue)); + /* Clear W[6:0] bits */ + + tmpreg = WWDG->CFR & CFR_W_Mask; + + /* Set W[6:0] bits according to WindowValue value */ + tmpreg |= WindowValue & (uint32_t) BIT_Mask; + + /* Store the new value */ + WWDG->CFR = tmpreg; +} + +/** + * @brief Enables the WWDG Early Wakeup interrupt(EWI). + * @param None + * @retval None + */ +void WWDG_EnableIT(void) +{ + *(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE; +} + +/** + * @brief Sets the WWDG counter value. + * @param Counter: specifies the watchdog counter value. + * This parameter must be a number between 0x40 and 0x7F. + * @retval None + */ +void WWDG_SetCounter(uint8_t Counter) +{ + /* Check the parameters */ + assert_param(IS_WWDG_COUNTER(Counter)); + /* Write to T[6:0] bits to configure the counter value, no need to do + a read-modify-write; writing a 0 to WDGA bit does nothing */ + WWDG->CR = Counter & BIT_Mask; +} + +/** + * @brief Enables WWDG and load the counter value. + * @param Counter: specifies the watchdog counter value. + * This parameter must be a number between 0x40 and 0x7F. + * @retval None + */ +void WWDG_Enable(uint8_t Counter) +{ + /* Check the parameters */ + assert_param(IS_WWDG_COUNTER(Counter)); + WWDG->CR = CR_WDGA_Set | Counter; +} + +/** + * @brief Checks whether the Early Wakeup interrupt flag is set or not. + * @param None + * @retval The new state of the Early Wakeup interrupt flag (SET or RESET) + */ +FlagStatus WWDG_GetFlagStatus(void) +{ + return (FlagStatus)(WWDG->SR); +} + +/** + * @brief Clears Early Wakeup interrupt flag. + * @param None + * @retval None + */ +void WWDG_ClearFlag(void) +{ + WWDG->SR = (uint32_t)RESET; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/JLinkSettings.ini b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/JLinkSettings.ini new file mode 100644 index 0000000..39b6d05 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/JLinkSettings.ini @@ -0,0 +1,39 @@ +[BREAKPOINTS] +ForceImpTypeAny = 0 +ShowInfoWin = 1 +EnableFlashBP = 2 +BPDuringExecution = 0 +[CFI] +CFISize = 0x00 +CFIAddr = 0x00 +[CPU] +MonModeVTableAddr = 0xFFFFFFFF +MonModeDebug = 0 +MaxNumAPs = 0 +LowPowerHandlingMode = 0 +OverrideMemMap = 0 +AllowSimulation = 1 +ScriptFile="" +[FLASH] +CacheExcludeSize = 0x00 +CacheExcludeAddr = 0x00 +MinNumBytesFlashDL = 0 +SkipProgOnCRCMatch = 1 +VerifyDownload = 1 +AllowCaching = 1 +EnableFlashDL = 2 +Override = 0 +Device="ARM7" +[GENERAL] +WorkRAMSize = 0x00 +WorkRAMAddr = 0x00 +RAMUsageLimit = 0x00 +[SWO] +SWOLogFile="" +[MEM] +RdOverrideOrMask = 0x00 +RdOverrideAndMask = 0xFFFFFFFF +RdOverrideAddr = 0xFFFFFFFF +WrOverrideOrMask = 0x00 +WrOverrideAndMask = 0xFFFFFFFF +WrOverrideAddr = 0xFFFFFFFF diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Board/board.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Board/board.h new file mode 100644 index 0000000..78e9617 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Board/board.h @@ -0,0 +1,106 @@ +#ifndef PIBOT_BOARD_H_ +#define PIBOT_BOARD_H_ + +//class Queue; +#include "queue.h" +enum USART_NUMBER +{ + USART_1 = 1, + USART_2, + USART_3, + USART_4, + USART_5, + USART_6, +}; + +enum MOTOR_ID +{ + MOTOR_1 = 0, + MOTOR_2, + MOTOR_3, + MOTOR_4 +}; + +#define PIN_MODE_INPUT 0x0 +#define PIN_MODE_OUTPUT 0x1 +#define PIN_MODE_INPUT_PULLUP 0x2 + +//output +#define _RUN_LED 0 +#define _JS_CMD 1 +#define _JS_CS 2 +#define _JS_CLK 3 + +//input +#define _JS_DAT 0 + +class Board +{ +public: + virtual void init()=0; + virtual void enable_irq()=0; + virtual void disable_irq()=0; + virtual void usart_debug_init()=0; + virtual void usart_init(unsigned char num, unsigned long buad)=0; + virtual Queue* usart_getDataQueue(unsigned char num)=0; + + virtual void usart_write(unsigned char num, unsigned char ch)=0; + virtual void usart_write(unsigned char num, unsigned char* data, unsigned char len)=0; + + virtual void set_config(unsigned char* data, unsigned short len)=0; + virtual void get_config(unsigned char* data, unsigned short len)=0; + + virtual unsigned long get_tick_count()=0; + + virtual void setDOState(unsigned char led_id, unsigned char operation) = 0; + virtual bool getDIState(unsigned char id) = 0; + + virtual void motor_init(unsigned char num, unsigned long period)=0; + virtual void motor_pwm(unsigned char num, long pwm_value)=0; + + virtual void encoder_init(unsigned char motor_id) = 0; + virtual long get_encoder_count(unsigned char motor_id) = 0; + + virtual void i2c_init() = 0; + virtual unsigned char i2c_write_byte(unsigned char equipment_address, unsigned char reg_address , unsigned char pt_char)=0; + virtual unsigned char i2c_write_buf(unsigned char equipment_address, unsigned char reg_address , unsigned char* pt_char , unsigned char size) = 0; + virtual unsigned char i2c_read_byte(unsigned char equipment_address, unsigned char reg_address , unsigned char* pt_char) = 0; + virtual unsigned char i2c_read_buf(unsigned char equipment_address, unsigned char reg_address , unsigned char* pt_char , unsigned char size) = 0; + + unsigned char i2c_write_bit(unsigned char equipment_address, unsigned char reg_address, unsigned char bitNum, unsigned char data){ + unsigned char b=0; + i2c_read_byte(equipment_address, reg_address, &b); + b = (data != 0) ? (b | (1 << bitNum)) : (b & ~(1 << bitNum)); + return i2c_write_byte(equipment_address, reg_address, b); + } + + unsigned char i2c_write_bits(unsigned char devAddr, unsigned char regAddr, unsigned char bitStart, unsigned char length, unsigned char data) { + unsigned char b; + if (i2c_read_byte(devAddr, regAddr, &b) != 0) { + unsigned char mask = ((1 << length) - 1) << (bitStart - length + 1); + data <<= (bitStart - length + 1); // shift data into correct position + data &= mask; // zero all non-important bits in data + b &= ~(mask); // zero all important bits in existing byte + b |= data; // combine data with existing byte + return i2c_write_byte(devAddr, regAddr, b); + } else { + return 0; + } + } + + int i2c_read_bits(unsigned char devAddr, unsigned char regAddr, unsigned char bitStart, unsigned char length, unsigned char *data) { + unsigned char count, b; + if ((count = i2c_read_byte(devAddr, regAddr, &b)) != 0) { + unsigned char mask = ((1 << length) - 1) << (bitStart - length + 1); + b &= mask; + b >>= (bitStart - length + 1); + *data = b; + } + return count; + } + + + static Board* get(); +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Board/board_stm32.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Board/board_stm32.cpp new file mode 100644 index 0000000..47b6871 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Board/board_stm32.cpp @@ -0,0 +1,404 @@ +#include "board_stm32.h" +#include "bsplib.h" +#include "print.h" +#include +Board_STM32 Board_STM32::board; + +#define CONFIG_EEPROM_BASE ((uint32_t)0x800F400) + +#ifndef MOTOR_DRIVER +#define MOTOR_DRIVER MOTOR_DRIVER_TB6612 +#endif + +Board* Board::get() +{ + return &Board_STM32::board; +} + +Board_STM32::Board_STM32() +{ +} + +Board_STM32::~Board_STM32() +{ +} + +void Board_STM32::init() +{ + PB_System_Timer_Init(); + DOInit(); + DIInit(); +} + +void Board_STM32::enable_irq() +{ +} + +void Board_STM32::disable_irq() +{ +} + +void Board_STM32::usart_debug_init() +{ + PB_USART_Init(2, 115200, 0); +} + +#ifdef __cplusplus +extern "C" { +#endif +int fputc(int ch, FILE *f) +{ + PB_USART_Put_Char(2, ch); + return (ch); +} +#ifdef __cplusplus +} +#endif + +void Board_STM32::usart_init(unsigned char num, unsigned long buad) +{ + if (num == (unsigned char)USART_1) { + PB_USART_Init(1, 115200, 0); + } else if (num == (unsigned char)USART_2) { + PB_USART_Init(2, 115200, 0); + } else if (num == (unsigned char)USART_3) { + PB_USART_Init(3, 115200, 0); + } +} + +Queue* Board_STM32::usart_getDataQueue(unsigned char num) +{ + if (num == (unsigned char)USART_1) { + } else if (num == (unsigned char)USART_2) { + return &usart3_queue; + }else if (num == (unsigned char)USART_3) { + return &usart3_queue; + } + return 0; +} + +void Board_STM32::usart_write(unsigned char num, unsigned char ch) +{ + if (num == (unsigned char)USART_1) { + PB_USART_Put_Char(1, ch); + } else if (num == (unsigned char)USART_2) { + PB_USART_Put_Char(3, ch); + }else if (num == (unsigned char)USART_3) { + PB_USART_Put_Char(3, ch); + } +} + +void Board_STM32::usart_write(unsigned char num, unsigned char* data, unsigned char len) +{ + if (num == (unsigned char)USART_1) { + while(len--) + PB_USART_Put_Char(1, *data++); + } else if (num == (unsigned char)USART_2) { + while(len--) + PB_USART_Put_Char(2, *data++); + }else if (num == (unsigned char)USART_3) { + while(len--) + PB_USART_Put_Char(3, *data++); + } +} + +void Board_STM32::set_config(unsigned char* data, unsigned short len) +{ + if (len%2==0) { + PB_Flash_EnableWrite(); + for(int i=0;i PB14、PB15 + 左电机PWM: PB1 -> TIM3 ch4 + 左电机编码器: PA0、PA1 -> TIM2, AF0 + 右电机硬件连接: + 右电机控制: IN1、IN2 -> PB12、PB13 + 右电机PWM: PB1 -> TIM3 ch3 + 右电机编码器: PB6、PB7 -> TIM4, AF0 +* Author : zhanli&719901725@qq.com +* Date : 2024/01/17 zhanli 更新部分定义说明 +*---------------------------------------------------------------------**/ +void Board_STM32::motor_pwm(unsigned char num, long pwmVal) +{ + pb_printf("motor_pwm: num = %d, pwm = %d\n", num, pwmVal); + // pwmVal = 2000; + if (num == MOTOR_1) { + if (pwmVal > 5) { + #if MOTOR_DRIVER == MOTOR_DRIVER_TB6612 + GPIO_ResetBits(GPIOB, GPIO_Pin_15); + GPIO_SetBits(GPIOB, GPIO_Pin_14); + PB_Set_PWM(TIM3, 4, (uint16_t)pwmVal); + #else + PB_Set_PWM(TIM1, 4, (uint16_t)pwm_value); + PB_Set_PWM(TIM2, 3, 0); + #endif + } else if (pwmVal < -5) { + #if MOTOR_DRIVER == MOTOR_DRIVER_TB6612 + GPIO_SetBits(GPIOB, GPIO_Pin_15); + GPIO_ResetBits(GPIOB, GPIO_Pin_14); + PB_Set_PWM(TIM3, 4, (uint16_t)-pwmVal); + #else + PB_Set_PWM(TIM1, 4, 0); + PB_Set_PWM(TIM2, 3, (uint16_t)-pwm_value); + #endif + } else { + #if MOTOR_DRIVER == MOTOR_DRIVER_TB6612 + GPIO_ResetBits(GPIOB, GPIO_Pin_15); + GPIO_ResetBits(GPIOB, GPIO_Pin_14); + PB_Set_PWM(TIM3, 4, 0); + #else + PB_Set_PWM(TIM1, 4, 0); + PB_Set_PWM(TIM2, 3, 0); + #endif + } + } else if (num == MOTOR_2) { + if (pwmVal > 5) { + #if MOTOR_DRIVER == MOTOR_DRIVER_TB6612 + GPIO_SetBits(GPIOB, GPIO_Pin_12); + GPIO_ResetBits(GPIOB, GPIO_Pin_13); + PB_Set_PWM(TIM3, 3, (uint16_t)pwmVal); + #else + PB_Set_PWM(TIM2, 4, (uint16_t)pwm_value); + PB_Set_PWM(TIM1, 1, 0); + #endif + } else if (pwmVal < -5) { + #if MOTOR_DRIVER == MOTOR_DRIVER_TB6612 + GPIO_ResetBits(GPIOB, GPIO_Pin_12); + GPIO_SetBits(GPIOB, GPIO_Pin_13); + PB_Set_PWM(TIM3, 3, (uint16_t)-pwmVal); + #else + PB_Set_PWM(TIM1, 1, (uint16_t)-pwm_value); + PB_Set_PWM(TIM2, 4, 0); + #endif + } else { + #if MOTOR_DRIVER == MOTOR_DRIVER_TB6612 + GPIO_ResetBits(GPIOB, GPIO_Pin_12); + GPIO_ResetBits(GPIOB, GPIO_Pin_13); + PB_Set_PWM(TIM3, 3, 0); + #else + PB_Set_PWM(TIM1, 1, 0); + PB_Set_PWM(TIM2, 4, 0); + #endif + } + } else if (num == MOTOR_3) { + + } else if (num == MOTOR_4) { + + } +} + +unsigned long Board_STM32::get_tick_count() +{ + return PB_Get_System_Time() / 1000;; +} + +void Board_STM32::encoder_init(unsigned char motor_id) +{ + // MOTOR 1是左电机 + if (motor_id == MOTOR_1) { + PB_Encoder_Init(TIM2, 0); + } else if (motor_id == MOTOR_2) { + PB_Encoder_Init(TIM4, 0); + } +} + +long Board_STM32::get_encoder_count(unsigned char motor_id) +{ + if (motor_id == MOTOR_1) { + return -PB_Get_Encode_TIM2(); + } else if (motor_id == MOTOR_2) { + return PB_Get_Encode_TIM4(); + } + return 0; +} + +void Board_STM32::i2c_init() +{ + PB_I2C_Init(); +} + +unsigned char Board_STM32::i2c_write_byte(unsigned char equipment_address, unsigned char reg_address, unsigned char pt_char) +{ + return PB_I2C_Write_Byte(equipment_address, reg_address, pt_char); +} + +unsigned char Board_STM32::i2c_write_buf(unsigned char equipment_address, unsigned char reg_address, unsigned char* pt_char, unsigned char size) +{ + return PB_I2C_Write_Buf(equipment_address, reg_address, pt_char, size); +} + +unsigned char Board_STM32::i2c_read_byte(unsigned char equipment_address, unsigned char reg_address, unsigned char* pt_char) +{ + return PB_I2C_Read_Byte(equipment_address, reg_address, pt_char); +} + +unsigned char Board_STM32::i2c_read_buf(unsigned char equipment_address, unsigned char reg_address, unsigned char* pt_char, unsigned char size) +{ + return PB_I2C_Read_Buf(equipment_address, reg_address, pt_char, size); +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Board/board_stm32.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Board/board_stm32.h new file mode 100644 index 0000000..7af9e51 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Board/board_stm32.h @@ -0,0 +1,52 @@ +#ifndef PIBOT_BOARD_MEGA2560_H_ +#define PIBOT_BOARD_MEGA2560_H_ + +#include "board.h" +#include "variable_queue.h" + + +class Board_STM32 : public Board +{ +public: + Board_STM32(); + ~Board_STM32(); + virtual void init(); + virtual void enable_irq(); + virtual void disable_irq(); + virtual void usart_debug_init(); + virtual void usart_write(unsigned char num, unsigned char ch); + virtual void usart_init(unsigned char num, unsigned long buad); + virtual Queue* usart_getDataQueue(unsigned char num); + + virtual void usart_write(unsigned char num, unsigned char* data, unsigned char len); + + virtual void set_config(unsigned char* data, unsigned short len); + virtual void get_config(unsigned char* data, unsigned short len); + + virtual void setDOState(unsigned char id, unsigned char operation); + virtual bool getDIState(unsigned char id); + + virtual unsigned long get_tick_count(); + + virtual void motor_init(unsigned char num, unsigned long period); + virtual void motor_pwm(unsigned char num, long pwm_value); + + virtual void encoder_init(unsigned char motor_id) ; + virtual long get_encoder_count(unsigned char motor_id); + + virtual void i2c_init(); + virtual unsigned char i2c_write_byte(unsigned char equipment_address, unsigned char reg_address , unsigned char pt_char); + virtual unsigned char i2c_write_buf(unsigned char equipment_address, unsigned char reg_address , unsigned char* pt_char , unsigned char size); + virtual unsigned char i2c_read_byte(unsigned char equipment_address, unsigned char reg_address , unsigned char* pt_char); + virtual unsigned char i2c_read_buf(unsigned char equipment_address, unsigned char reg_address , unsigned char* pt_char, unsigned char size); + +private: + void DOInit(void); + void DIInit(void); + public: + static Board_STM32 board; + + VQueue<256> usart3_queue; +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Board/print.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Board/print.h new file mode 100644 index 0000000..1eb1cd3 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Board/print.h @@ -0,0 +1,12 @@ +#ifndef PIBOT_PRINT_H_ +#define PIBOT_PRINT_H_ + +#include + +#if DEBUG_ENABLE +#define pb_printf(format,...) printf("" __FILE__ ":%d - " format "\r\n", __LINE__, ##__VA_ARGS__) +#else +#define pb_printf(format,...) +#endif + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/DataHolder/data_holder.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/DataHolder/data_holder.cpp new file mode 100644 index 0000000..86b0138 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/DataHolder/data_holder.cpp @@ -0,0 +1,39 @@ +#include "data_holder.h" +#include "board.h" +#include + +Data_holder::Data_holder() +{ + strncpy((char*)&firmware_info.version, FW_VERSION, strlen(FW_VERSION)>sizeof(firmware_info.version)?sizeof(firmware_info.version):strlen(FW_VERSION)); + sprintf(firmware_info.time, "%s", "20220301"); + memset(¶meter, 0, sizeof(struct Robot_parameter)); + memset(&velocity, 0, sizeof(struct Robot_velocity)); + memset(&odom, 0, sizeof(struct Robot_odom)); + memset(&pid_data, 0, sizeof(struct Robot_pid_data)); + memset(imu_data, 0, sizeof(imu_data)); +} + +void Data_holder::load_parameter() +{ + Board::get()->get_config((unsigned char*)¶meter, sizeof(parameter)); + + if (parameter.params.ko == 0) + parameter.params.ko = 1; + + if (parameter.params.do_pid_interval == 0) + parameter.params.do_pid_interval = 10; + + if (parameter.params.motor_ratio == (unsigned short)-1 || parameter.params.motor_ratio == 0) { + parameter.params.motor_ratio = 1; + } + + parameter.params.model_type = MODEL_TYPE_2WD_DIFF; // in stm32f1 fix 2wd +} + +void Data_holder::save_parameter() +{ + Board::get()->set_config((unsigned char*)¶meter, sizeof(parameter)); + parameter.params.model_type = MODEL_TYPE_2WD_DIFF; // in stm32f1 fix 2wd +} + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/DataHolder/data_holder.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/DataHolder/data_holder.h new file mode 100644 index 0000000..6004afd --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/DataHolder/data_holder.h @@ -0,0 +1,111 @@ +#ifndef DATA_HOLDER_H_ +#define DATA_HOLDER_H_ + +#include + +// 1字节对齐 +#pragma pack(1) + +struct Robot_firmware +{ + char version[16]; //固件版本 + char time[16]; //构建时间 +}; + +enum IMU_TYPE +{ + IMU_TYPE_GY65 = 49, + IMU_TYPE_GY85 = 69, + IMU_TYPE_GY87 = 71 +}; + +#define MOTOR_ENCODER_1_FLAG 0x01 +#define MOTOR_ENCODER_2_FLAG 0x02 +#define MOTOR_ENCODER_3_FLAG 0x04 +#define MOTOR_ENCODER_4_FLAG 0x08 + +struct Params +{ + unsigned short wheel_diameter; //轮子直径 mm + unsigned short wheel_track; //差分：轮距， 三全向轮：直径，四全向：前后轮距+左右轮距 mm + unsigned short encoder_resolution; //编码器分辨率 + unsigned char do_pid_interval; //pid间隔 (ms) + unsigned short kp; + unsigned short ki; + unsigned short kd; + unsigned short ko; //pid参数比例 + unsigned short cmd_last_time; //命令持久时间ms 超过该时间会自动停止运动 + unsigned short max_v_liner_x; // 最大x线速度 + unsigned short max_v_liner_y; // 最大y线速度 + unsigned short max_v_angular_z; // 最大角速度 + unsigned char imu_type; // imu类型 参见IMU_TYPE + unsigned short motor_ratio; // 电机减速比 + unsigned char model_type; // 运动模型类型 参见MODEL_TYPE + unsigned char motor_nonexchange_flag; // 电机标志参数 1 正接 0 反接(相当于电机线交换) + unsigned char encoder_nonexchange_flag; // 编码器标志参数 1 正接 0 反接(相当于编码器ab相交换) +}; + +struct Robot_parameter +{ + union + { + char buff[64]; + struct Params params; + }; +}; + +struct Robot_velocity +{ + short v_liner_x; //线速度 前>0 cm/s + short v_liner_y; //差分轮 为0 cm/s + short v_angular_z; //角速度 左>0 0.01rad/s 100 means 1 rad/s +}; + +struct Robot_odom +{ + short v_liner_x; //线速度 前>0 后<0 cm/s + short v_liner_y; //差分轮 为0 cm/s + short v_angular_z; //角速度 左>0 右<0 0.01rad/s 100 means 1 rad/s + long x; //里程计坐标x cm (这里long为4字节，下同) + long y; //里程计坐标y cm + short yaw; //里程计航角 0.01rad 100 means 1 rad +}; + +struct Robot_pid_data +{ + long input[4]; //各轮子驱动输入值 + long output[4]; //个轮子输出值 +}; + +struct Robot_pwm_value +{ + short value[4]; +}; + +class Data_holder +{ +public: + static Data_holder* get() { + static Data_holder dh; + return &dh; + } + + void load_parameter(); + + void save_parameter(); + +private: + Data_holder(); +public: + struct Robot_firmware firmware_info;//版本信息 + struct Robot_parameter parameter; //参数 + struct Robot_velocity velocity; // 速度 + struct Robot_odom odom; //里程 + struct Robot_pid_data pid_data; //pid输入输出 + + float imu_data[9]; //imu的值 9axis + + float encoder_count[4]; // 编码器计数 + struct Robot_pwm_value pwm; // 控制的pwm +}; +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Encoder/encoder.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Encoder/encoder.h new file mode 100644 index 0000000..c244ffe --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Encoder/encoder.h @@ -0,0 +1,24 @@ +#ifndef PIBOT_ENCODER_H_ +#define PIBOT_ENCODER_H_ + +// 编码器接口 +class Encoder +{ +public: + //初始化 + virtual void init()=0; + + //清除编码器 + virtual void clear()=0; + + //获取累计编码器值 + virtual long get_total_count()=0; + + //获取编码器变化值， 用于pid计算 + virtual long get_increment_count_for_dopid()=0; + + //获取编码器变化值， 用于odom计算 + virtual long get_increment_count_for_odom()=0; +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Encoder/encoder_implement.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Encoder/encoder_implement.cpp new file mode 100644 index 0000000..5f5721a --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Encoder/encoder_implement.cpp @@ -0,0 +1,52 @@ +#include "encoder_implement.h" +#include "board.h" + +EncoderImp::EncoderImp(unsigned char _num, bool _reverse) : reverse(_reverse), num(_num) +{ + clear(); +} + +void EncoderImp::init() +{ + Board::get()->encoder_init(num); + clear(); +} + +void EncoderImp::clear() +{ + total_count = 0; + pid_pos = odom_pos = 0; +} + +long EncoderImp::get_total_count() +{ + if (reverse) + total_count += Board::get()->get_encoder_count(num); + else + total_count -= Board::get()->get_encoder_count(num); + + return total_count; +} + +long EncoderImp::get_increment_count_for_dopid() +{ + if (reverse) + total_count += Board::get()->get_encoder_count(num); + else + total_count -= Board::get()->get_encoder_count(num); + long l = total_count-pid_pos; + pid_pos = total_count; + return l; +} + +long EncoderImp::get_increment_count_for_odom() +{ + if (reverse) + total_count += Board::get()->get_encoder_count(num); + else + total_count -= Board::get()->get_encoder_count(num); + + long l = total_count-odom_pos; + odom_pos = total_count; + return l; +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Encoder/encoder_implement.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Encoder/encoder_implement.h new file mode 100644 index 0000000..1c623af --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Encoder/encoder_implement.h @@ -0,0 +1,35 @@ +#ifndef PIBOT_ENCODER_IMP_H_ +#define PIBOT_ENCODER_IMP_H_ + +#include "encoder.h" + +//编码器实现 编码器原理具体可以参考https://www.jianshu.com/p/068fb9882655 +class EncoderImp : public Encoder +{ +public: + EncoderImp(unsigned char num, bool _reverse=0); + + //初始化 + virtual void init(); + + //清除编码器 + virtual void clear(); + + //获取累计编码器值 + virtual long get_total_count(); + + //获取编码器变化值， 用于pid计算 + virtual long get_increment_count_for_dopid(); + + //获取编码器变化值， 用于odom计算 + virtual long get_increment_count_for_odom(); + + unsigned char get_reverse(){return reverse;} +private: + bool reverse; + unsigned char num; + long pid_pos, odom_pos; + float total_count; +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/ADXL345.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/ADXL345.cpp new file mode 100644 index 0000000..9b62e6a --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/ADXL345.cpp @@ -0,0 +1,202 @@ +// I2Cdev library collection - ADXL345 I2C device class +// Based on Analog Devices ADXL345 datasheet rev. C, 5/2011 +// 7/31/2011 by Jeff Rowberg +// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib +// +// Changelog: +// 2011-07-31 - initial release + +/* ============================================ +I2Cdev device library code is placed under the MIT license +Copyright (c) 2011 Jeff Rowberg + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. +=============================================== +*/ + +#include "ADXL345.h" +#include "board.h" + +/** Default constructor, uses default I2C address. + * @see ADXL345_DEFAULT_ADDRESS + */ +ADXL345::ADXL345() { + devAddr = ADXL345_DEFAULT_ADDRESS; +} + +/** Specific address constructor. + * @param address I2C address + * @see ADXL345_DEFAULT_ADDRESS + * @see ADXL345_ADDRESS_ALT_LOW + * @see ADXL345_ADDRESS_ALT_HIGH + */ +ADXL345::ADXL345(unsigned char address) { + devAddr = address; +} + +/** Power on and prepare for general usage. + * This will activate the accelerometer, so be sure to adjust the power settings + * after you call this method if you want it to enter standby mode, or another + * less demanding mode of operation. + */ +void ADXL345::initialize() { + Board::get()->i2c_write_byte(devAddr, ADXL345_RA_POWER_CTL, 0); // reset all power settings + setAutoSleepEnabled(true); + setMeasureEnabled(true); +} + +/** Verify the I2C connection. + * Make sure the device is connected and responds as expected. + * @return True if connection is valid, false otherwise + */ +bool ADXL345::testConnection() { + return getDeviceID() == 0xE5; +} + +// DEVID register + +/** Get Device ID. + * The DEVID register holds a fixed device ID code of 0xE5 (345 octal). + * @return Device ID (should be 0xE5, 229 dec, 345 oct) + * @see ADXL345_RA_DEVID + */ +unsigned char ADXL345::getDeviceID() { + Board::get()->i2c_read_buf(devAddr, ADXL345_RA_DEVID, buffer, 1); + return buffer[0]; +} + +// BW_RATE register + +/** Set low power enabled status. + * @see getLowPowerEnabled() + * @param enabled Low power enable setting + * @see ADXL345_RA_BW_RATE + * @see ADXL345_BW_LOWPOWER_BIT + */ +void ADXL345::setLowPowerEnabled(bool enabled) { + Board::get()->i2c_write_bit(devAddr, ADXL345_RA_BW_RATE, ADXL345_BW_LOWPOWER_BIT, enabled); +} + +/** Set measurement data rate. + * 0x7 = 12.5Hz + * 0x8 = 25Hz, increasing or decreasing by factors of 2, so: + * 0x9 = 50Hz + * 0xA = 100Hz + * @param rate New data rate (0x0 - 0xF) + * @see ADXL345_RATE_100 + * @see ADXL345_RA_BW_RATE + * @see ADXL345_BW_RATE_BIT + * @see ADXL345_BW_RATE_LENGTH + */ +void ADXL345::setRate(unsigned char rate) { + Board::get()->i2c_write_bits(devAddr, ADXL345_RA_BW_RATE, ADXL345_BW_RATE_BIT, ADXL345_BW_RATE_LENGTH, rate); +} + +// POWER_CTL register +/** Set auto-sleep enabled status. + * @param enabled New auto-sleep status + * @see getAutoSleepEnabled() + * @see ADXL345_RA_POWER_CTL + * @see ADXL345_PCTL_AUTOSLEEP_BIT + */ +void ADXL345::setAutoSleepEnabled(bool enabled) { + Board::get()->i2c_write_bit(devAddr, ADXL345_RA_POWER_CTL, ADXL345_PCTL_AUTOSLEEP_BIT, enabled); +} + +/** Set measurement enabled status. + * @param enabled Measurement enabled status + * @see getMeasureEnabled() + * @see ADXL345_RA_POWER_CTL + * @see ADXL345_PCTL_MEASURE_BIT + */ +void ADXL345::setMeasureEnabled(bool enabled) { + Board::get()->i2c_write_bit(devAddr, ADXL345_RA_POWER_CTL, ADXL345_PCTL_MEASURE_BIT, enabled); +} + +// DATA_FORMAT register + +/** Set self-test force enabled. + * @param enabled New self-test force enabled setting + * @see getSelfTestEnabled() + * @see ADXL345_RA_DATA_FORMAT + * @see ADXL345_FORMAT_SELFTEST_BIT + */ +void ADXL345::setSelfTestEnabled(unsigned char enabled) { + Board::get()->i2c_write_bit(devAddr, ADXL345_RA_DATA_FORMAT, ADXL345_FORMAT_SELFTEST_BIT, enabled); +} + +/** Set interrupt mode setting. + * @param mode New interrupt mode setting + * @see getInterruptMode() + * @see ADXL345_RA_DATA_FORMAT + * @see ADXL345_FORMAT_INTMODE_BIT + */ +void ADXL345::setInterruptMode(unsigned char mode) { + Board::get()->i2c_write_bit(devAddr, ADXL345_RA_DATA_FORMAT, ADXL345_FORMAT_INTMODE_BIT, mode); +} + +/** Set full resolution mode setting. + * @param resolution New full resolution enabled setting + * @see getFullResolution() + * @see ADXL345_RA_DATA_FORMAT + * @see ADXL345_FORMAT_FULL_RES_BIT + */ +void ADXL345::setFullResolution(unsigned char resolution) { + Board::get()->i2c_write_bit(devAddr, ADXL345_RA_DATA_FORMAT, ADXL345_FORMAT_FULL_RES_BIT, resolution); +} + +/** Set data range setting. + * @param range Range value (0x0 - 0x3 for 2g/4g/8g/16g) + * @see getRange() + * @see ADXL345_RA_DATA_FORMAT + * @see ADXL345_FORMAT_RANGE_BIT + * @see ADXL345_FORMAT_RANGE_LENGTH + */ +void ADXL345::setRange(unsigned char range) { + Board::get()->i2c_write_bits(devAddr, ADXL345_RA_DATA_FORMAT, ADXL345_FORMAT_RANGE_BIT, ADXL345_FORMAT_RANGE_LENGTH, range); +} + +// DATA* registers + +/** Get 3-axis accleration measurements. + * These six bytes (Register 0x32 to Register 0x37) are eight bits each and hold + * the output data for each axis. Register 0x32 and Register 0x33 hold the + * output data for the x-axis, Register 0x34 and Register 0x35 hold the output + * data for the y-axis, and Register 0x36 and Register 0x37 hold the output data + * for the z-axis. The output data is twos complement, with DATAx0 as the least + * significant byte and DATAx1 as the most significant byte, where x represent + * X, Y, or Z. The DATA_FORMAT register (Address 0x31) controls the format of + * the data. It is recommended that a multiple-byte read of all registers be + * performed to prevent a change in data between reads of sequential registers. + * + * The DATA_FORMAT register controls the presentation of data to Register 0x32 + * through Register 0x37. All data, except that for the +/-16 g range, must be + * clipped to avoid rollover. + * + * @param x 16-bit signed integer container for X-axis acceleration + * @param y 16-bit signed integer container for Y-axis acceleration + * @param z 16-bit signed integer container for Z-axis acceleration + * @see ADXL345_RA_DATAX0 + */ +void ADXL345::getAcceleration(short* x, short* y, short* z) { + Board::get()->i2c_read_buf(devAddr, ADXL345_RA_DATAX0, buffer, 6); + *x = (((short)buffer[1]) << 8) | buffer[0]; + *y = (((short)buffer[3]) << 8) | buffer[2]; + *z = (((short)buffer[5]) << 8) | buffer[4]; +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/ADXL345.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/ADXL345.h new file mode 100644 index 0000000..aba59a9 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/ADXL345.h @@ -0,0 +1,166 @@ +#ifndef _ADXL345_H_ +#define _ADXL345_H_ + + +#define ADXL345_ADDRESS_ALT_LOW 0x53 // alt address pin low (GND) +#define ADXL345_ADDRESS_ALT_HIGH 0x1D // alt address pin high (VCC) +#define ADXL345_DEFAULT_ADDRESS ADXL345_ADDRESS_ALT_LOW + +#define ADXL345_RA_DEVID 0x00 +#define ADXL345_RA_RESERVED1 0x01 +#define ADXL345_RA_THRESH_TAP 0x1D +#define ADXL345_RA_OFSX 0x1E +#define ADXL345_RA_OFSY 0x1F +#define ADXL345_RA_OFSZ 0x20 +#define ADXL345_RA_DUR 0x21 +#define ADXL345_RA_LATENT 0x22 +#define ADXL345_RA_WINDOW 0x23 +#define ADXL345_RA_THRESH_ACT 0x24 +#define ADXL345_RA_THRESH_INACT 0x25 +#define ADXL345_RA_TIME_INACT 0x26 +#define ADXL345_RA_ACT_INACT_CTL 0x27 +#define ADXL345_RA_THRESH_FF 0x28 +#define ADXL345_RA_TIME_FF 0x29 +#define ADXL345_RA_TAP_AXES 0x2A +#define ADXL345_RA_ACT_TAP_STATUS 0x2B +#define ADXL345_RA_BW_RATE 0x2C +#define ADXL345_RA_POWER_CTL 0x2D +#define ADXL345_RA_INT_ENABLE 0x2E +#define ADXL345_RA_INT_MAP 0x2F +#define ADXL345_RA_INT_SOURCE 0x30 +#define ADXL345_RA_DATA_FORMAT 0x31 +#define ADXL345_RA_DATAX0 0x32 +#define ADXL345_RA_DATAX1 0x33 +#define ADXL345_RA_DATAY0 0x34 +#define ADXL345_RA_DATAY1 0x35 +#define ADXL345_RA_DATAZ0 0x36 +#define ADXL345_RA_DATAZ1 0x37 +#define ADXL345_RA_FIFO_CTL 0x38 +#define ADXL345_RA_FIFO_STATUS 0x39 + +#define ADXL345_AIC_ACT_AC_BIT 7 +#define ADXL345_AIC_ACT_X_BIT 6 +#define ADXL345_AIC_ACT_Y_BIT 5 +#define ADXL345_AIC_ACT_Z_BIT 4 +#define ADXL345_AIC_INACT_AC_BIT 3 +#define ADXL345_AIC_INACT_X_BIT 2 +#define ADXL345_AIC_INACT_Y_BIT 1 +#define ADXL345_AIC_INACT_Z_BIT 0 + +#define ADXL345_TAPAXIS_SUP_BIT 3 +#define ADXL345_TAPAXIS_X_BIT 2 +#define ADXL345_TAPAXIS_Y_BIT 1 +#define ADXL345_TAPAXIS_Z_BIT 0 + +#define ADXL345_TAPSTAT_ACTX_BIT 6 +#define ADXL345_TAPSTAT_ACTY_BIT 5 +#define ADXL345_TAPSTAT_ACTZ_BIT 4 +#define ADXL345_TAPSTAT_ASLEEP_BIT 3 +#define ADXL345_TAPSTAT_TAPX_BIT 2 +#define ADXL345_TAPSTAT_TAPY_BIT 1 +#define ADXL345_TAPSTAT_TAPZ_BIT 0 + +#define ADXL345_BW_LOWPOWER_BIT 4 +#define ADXL345_BW_RATE_BIT 3 +#define ADXL345_BW_RATE_LENGTH 4 + +#define ADXL345_RATE_3200 15 +#define ADXL345_RATE_1600 14 +#define ADXL345_RATE_800 13 +#define ADXL345_RATE_400 12 +#define ADXL345_RATE_200 11 +#define ADXL345_RATE_100 10 +#define ADXL345_RATE_50 9 +#define ADXL345_RATE_25 8 +#define ADXL345_RATE_12P5 7 +#define ADXL345_RATE_6P25 6 +#define ADXL345_RATE_3P13 5 +#define ADXL345_RATE_1P56 4 +#define ADXL345_RATE_0P78 3 +#define ADXL345_RATE_0P39 2 +#define ADXL345_RATE_0P20 1 +#define ADXL345_RATE_0P10 0 + +#define ADXL345_PCTL_LINK_BIT 5 +#define ADXL345_PCTL_AUTOSLEEP_BIT 4 +#define ADXL345_PCTL_MEASURE_BIT 3 +#define ADXL345_PCTL_SLEEP_BIT 2 +#define ADXL345_PCTL_WAKEUP_BIT 1 +#define ADXL345_PCTL_WAKEUP_LENGTH 2 + +#define ADXL345_WAKEUP_8HZ 0b00 +#define ADXL345_WAKEUP_4HZ 0b01 +#define ADXL345_WAKEUP_2HZ 0b10 +#define ADXL345_WAKEUP_1HZ 0b11 + +#define ADXL345_INT_DATA_READY_BIT 7 +#define ADXL345_INT_SINGLE_TAP_BIT 6 +#define ADXL345_INT_DOUBLE_TAP_BIT 5 +#define ADXL345_INT_ACTIVITY_BIT 4 +#define ADXL345_INT_INACTIVITY_BIT 3 +#define ADXL345_INT_FREE_FALL_BIT 2 +#define ADXL345_INT_WATERMARK_BIT 1 +#define ADXL345_INT_OVERRUN_BIT 0 + +#define ADXL345_FORMAT_SELFTEST_BIT 7 +#define ADXL345_FORMAT_SPIMODE_BIT 6 +#define ADXL345_FORMAT_INTMODE_BIT 5 +#define ADXL345_FORMAT_FULL_RES_BIT 3 +#define ADXL345_FORMAT_JUSTIFY_BIT 2 +#define ADXL345_FORMAT_RANGE_BIT 1 +#define ADXL345_FORMAT_RANGE_LENGTH 2 + +#define ADXL345_RANGE_2G 0 +#define ADXL345_RANGE_4G 1 +#define ADXL345_RANGE_8G 2 +#define ADXL345_RANGE_16G 3 + +#define ADXL345_FIFO_MODE_BIT 7 +#define ADXL345_FIFO_MODE_LENGTH 2 +#define ADXL345_FIFO_TRIGGER_BIT 5 +#define ADXL345_FIFO_SAMPLES_BIT 4 +#define ADXL345_FIFO_SAMPLES_LENGTH 5 + +#define ADXL345_FIFO_MODE_BYPASS 0 +#define ADXL345_FIFO_MODE_FIFO 1 +#define ADXL345_FIFO_MODE_STREAM 2 +#define ADXL345_FIFO_MODE_TRIGGER 3 + +#define ADXL345_FIFOSTAT_TRIGGER_BIT 7 +#define ADXL345_FIFOSTAT_LENGTH_BIT 5 +#define ADXL345_FIFOSTAT_LENGTH_LENGTH 6 + +class ADXL345 { +public: + ADXL345(); + ADXL345(unsigned char address); + + void initialize(); + bool testConnection(); + + // DEVID register + unsigned char getDeviceID(); + + // BW_RATE register + void setLowPowerEnabled(bool enabled); + void setRate(unsigned char rate); + + // POWER_CTL register + void setAutoSleepEnabled(bool enabled); + void setMeasureEnabled(bool enabled); + + // DATA_FORMAT register + void setSelfTestEnabled(unsigned char enabled); + void setInterruptMode(unsigned char mode); + void setFullResolution(unsigned char resolution); + void setRange(unsigned char range); + + // DATA* registers + void getAcceleration(short* x, short* y, short* z); + +private: + unsigned char devAddr; + unsigned char buffer[6]; +}; + +#endif /* _ADXL345_H_ */ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY65.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY65.cpp new file mode 100644 index 0000000..f7958c1 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY65.cpp @@ -0,0 +1,58 @@ +#include "GY65.h" +#include "board.h" +#include "print.h" +#include "delay.h" + +#define ADX_SCALE 0.00239420166015625 // 4mg/LSB 16/63356*9.80665 +#define GRY_SCALE 0.001065264417860243 //rad/s 4000/65536*(PI/180) + +#define WRITE_INTERVAL 20 + +bool GY65::init() +{ + delay_ms(500); + Board::get()->i2c_init(); + + if (!mpu6050.testConnection()) { +#if IMU_DEBUG_ENABLE + pb_printf("MPU6050 NOT FOUND!"); +#endif + return false; + } + + mpu6050.initialize(); + delay_ms(WRITE_INTERVAL); + +#if IMU_DEBUG_ENABLE + uint8_t buffer=0; + Board::get()->i2c_read_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_PWR_MGMT_1, &buffer); + pb_printf("MPU6050_RA_PWR_MGMT_1=%d", buffer); + Board::get()->i2c_read_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_GYRO_CONFIG, &buffer); + pb_printf("MPU6050_RA_GYRO_CONFIG=%d", buffer); + Board::get()->i2c_read_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_ACCEL_CONFIG, &buffer); + pb_printf("MPU6050_RA_ACCEL_CONFIG=%d", buffer); +#endif + + pb_printf("GY65 INIT SUCCESS!"); + + return true; +} + +void GY65::get_data(float* imu_data) +{ + mpu6050.getMotion6(&ax, &ay, &az, &gx, &gy, &gz); + +#if IMU_DEBUG_ENABLE + pb_printf("[%d %d %d] [%d %d %d]", ax, ay, az, gx, gy, gz); +#endif + + imu_data[0] = ax*ADX_SCALE; + imu_data[1] = ay*ADX_SCALE; + imu_data[2] = az*ADX_SCALE; + imu_data[3] = gx*GRY_SCALE; + imu_data[4] = gy*GRY_SCALE; + imu_data[5] = gz*GRY_SCALE; + imu_data[6] = 0; + imu_data[7] = 0; + imu_data[8] = 0; +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY65.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY65.h new file mode 100644 index 0000000..8f82387 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY65.h @@ -0,0 +1,19 @@ +#ifndef IMU_GY65_H_ +#define IMU_GY65_H_ + +#include "imu.h" +#include "MPU6050.h" + +class GY65 : public IMU +{ +public: + virtual bool init(); + virtual void get_data(float* imu_data); +private: + MPU6050 mpu6050; + + short ax, ay, az; + short gx, gy, gz; +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY85.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY85.cpp new file mode 100644 index 0000000..d549951 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY85.cpp @@ -0,0 +1,134 @@ +#include "GY85.h" +#include "board.h" +#include "print.h" +#include "delay.h" + +#define ADXL345_SCALE 0.0392266 // 4mg/LSB 4*9.80665 +#define ITG3205_SCALE 0.001065264417860243 //rad/s 4000/65536*(PI/180) +#define HMC5883L_SCALE 0.92 // mG/LSb + +#define WRITE_INTERVAL 20 +bool GY85::init() +{ + delay_ms(500); + Board::get()->i2c_init(); + + if (!accel.testConnection()) { +#if IMU_DEBUG_ENABLE + pb_printf("ADXL345 NOT FOUND!"); +#endif + return false; + } + + accel.initialize(); + delay_ms(WRITE_INTERVAL); + accel.setAutoSleepEnabled(false); + delay_ms(WRITE_INTERVAL); + accel.setFullResolution(1); + delay_ms(WRITE_INTERVAL); + accel.setRange(ADXL345_RANGE_4G); + delay_ms(WRITE_INTERVAL); + accel.setRate(ADXL345_RATE_50); + delay_ms(WRITE_INTERVAL); + +#if IMU_DEBUG_ENABLE + uint8_t buffer=0; + Board::get()->i2c_read_byte(ADXL345_DEFAULT_ADDRESS, ADXL345_RA_POWER_CTL, &buffer); + pb_printf("ADXL345_RA_POWER_CTL=%d", buffer); + Board::get()->i2c_read_byte(ADXL345_DEFAULT_ADDRESS, ADXL345_RA_DATA_FORMAT, &buffer); + pb_printf("ADXL345_RA_DATA_FORMAT=%d", buffer); + Board::get()->i2c_read_byte(ADXL345_DEFAULT_ADDRESS, ADXL345_RA_BW_RATE, &buffer); + pb_printf("ADXL345_RA_BW_RATE=%d", buffer); +#endif + + if (!gyro.testConnection()) { +#if IMU_DEBUG_ENABLE + pb_printf("ITG3205 NOT FOUND!"); +#endif + return false; + } + + gyro.initialize(); + gyro.reset(); + delay_ms(WRITE_INTERVAL); + gyro.setFullScaleRange(ITG3200_FULLSCALE_2000); + delay_ms(WRITE_INTERVAL); + gyro.setDLPFBandwidth(ITG3200_DLPF_BW_42); + delay_ms(WRITE_INTERVAL); + gyro.setRate(0x13); //1khz/(1+0x13) 50hz + delay_ms(WRITE_INTERVAL); + gyro.setClockSource(ITG3200_CLOCK_PLL_ZGYRO); + delay_ms(WRITE_INTERVAL); + +#if IMU_DEBUG_ENABLE + Board::get()->i2c_read_byte(ITG3200_DEFAULT_ADDRESS, ITG3200_RA_PWR_MGM, &buffer); + pb_printf("ITG3200_RA_PWR_MGM=%d", buffer); + Board::get()->i2c_read_byte(ITG3200_DEFAULT_ADDRESS, ITG3200_RA_DLPF_FS, &buffer); + pb_printf("ITG3200_RA_DLPF_FS=%d", buffer); + Board::get()->i2c_read_byte(ITG3200_DEFAULT_ADDRESS, ITG3200_RA_SMPLRT_DIV, &buffer); + pb_printf("ITG3200_RA_SMPLRT_DIV=%d", buffer); +#endif + + if (!mag.testConnection()) { +#if IMU_DEBUG_ENABLE + pb_printf("HMC5883L NOT FOUND!"); +#endif + return false; + } + + mag.initialize(); + delay_ms(WRITE_INTERVAL); + mag.setGain(HMC5883L_GAIN_1090); + delay_ms(WRITE_INTERVAL); + mag.setDataRate(HMC5883L_RATE_75); + delay_ms(WRITE_INTERVAL); + mag.setSampleAveraging(HMC5883L_AVERAGING_1); + delay_ms(WRITE_INTERVAL); + mag.setMode(HMC5883L_MODE_SINGLE); + delay_ms(WRITE_INTERVAL); + +#if IMU_DEBUG_ENABLE + Board::get()->i2c_read_byte(HMC5883L_DEFAULT_ADDRESS, HMC5883L_RA_CONFIG_B, &buffer); + pb_printf("HMC5883L_RA_CONFIG_B=%d", buffer); + Board::get()->i2c_read_byte(HMC5883L_DEFAULT_ADDRESS, HMC5883L_RA_CONFIG_A, &buffer); + pb_printf("HMC5883L_RA_CONFIG_A=%d", buffer); + Board::get()->i2c_read_byte(HMC5883L_DEFAULT_ADDRESS, HMC5883L_RA_MODE, &buffer); + pb_printf("HMC5883L_RA_MODE=%d", buffer); +#endif + + pb_printf("GY85 INIT SUCCESS!"); + + return true; +} + +#define CYCLE_COUNT 3 + +void GY85::get_data(float* imu_data) +{ + static int i=0; + + if (i%CYCLE_COUNT==0) { + accel.getAcceleration(&ax, &ay, &az); + } else if (i%CYCLE_COUNT==1) + { + gyro.getRotation(&gx, &gy, &gz); + } else //if (i%CYCLE_COUNT==2) + { + mag.getHeading(&mx, &my, &mz); + mag.setMode(HMC5883L_MODE_SINGLE); + } + i++; +#if IMU_DEBUG_ENABLE + pb_printf("[%d %d %d] [%d %d %d] [%d %d %d]", ax, ay, az, gx, gy, gz, mx, my, mz); +#endif + + imu_data[0] = ax*ADXL345_SCALE; + imu_data[1] = ay*ADXL345_SCALE; + imu_data[2] = az*ADXL345_SCALE; + imu_data[3] = gx*ITG3205_SCALE; + imu_data[4] = gy*ITG3205_SCALE; + imu_data[5] = gz*ITG3205_SCALE; + imu_data[6] = mx*HMC5883L_SCALE; + imu_data[7] = my*HMC5883L_SCALE; + imu_data[8] = mz*HMC5883L_SCALE; +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY85.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY85.h new file mode 100644 index 0000000..2f659a5 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY85.h @@ -0,0 +1,24 @@ +#ifndef IMU_GY85_H_ +#define IMU_GY85_H_ + +#include "imu.h" +#include "ADXL345.h" +#include "HMC5883L.h" +#include "ITG3200.h" + +class GY85 : public IMU +{ +public: + virtual bool init(); + virtual void get_data(float imu_data[9]); +private: + ADXL345 accel; + ITG3200 gyro; + HMC5883L mag; + + short ax, ay, az; + short gx, gy, gz; + short mx, my, mz; +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY87.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY87.cpp new file mode 100644 index 0000000..248ffdc --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY87.cpp @@ -0,0 +1,98 @@ +#include "GY87.h" +#include "board.h" +#include "print.h" +#include "delay.h" + +#define ADX_SCALE 0.00239420166015625 // 4mg/LSB 16/63356*9.80665 +#define GRY_SCALE 0.001065264417860243 //rad/s 4000/65536*(PI/180) +#define HMC5883L_SCALE 0.92 // mG/LSb + +#define WRITE_INTERVAL 20 + +bool GY87::init() +{ + delay_ms(500); +#if IMU_DEBUG_ENABLE + pb_printf("GY87::init"); +#endif + Board::get()->i2c_init(); + + if (!mpu6050.testConnection()) { +#if IMU_DEBUG_ENABLE + pb_printf("MPU6050 NOT FOUND!"); +#endif + return false; + } + + mpu6050.initialize(); + delay_ms(WRITE_INTERVAL); + +#if IMU_DEBUG_ENABLE + uint8_t buffer=0; + Board::get()->i2c_read_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_PWR_MGMT_1, &buffer); + pb_printf("MPU6050_RA_PWR_MGMT_1=%d", buffer); + Board::get()->i2c_read_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_GYRO_CONFIG, &buffer); + pb_printf("MPU6050_RA_GYRO_CONFIG=%d", buffer); + Board::get()->i2c_read_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_ACCEL_CONFIG, &buffer); + pb_printf("MPU6050_RA_ACCEL_CONFIG=%d", buffer); +#endif + + if (!mag.testConnection()) { +#if IMU_DEBUG_ENABLE + pb_printf("HMC5883L NOT FOUND!"); +#endif + return false; + } + + mag.initialize(); + delay_ms(WRITE_INTERVAL); + mag.setGain(HMC5883L_GAIN_1090); + delay_ms(WRITE_INTERVAL); + mag.setDataRate(HMC5883L_RATE_75); + delay_ms(WRITE_INTERVAL); + mag.setSampleAveraging(HMC5883L_AVERAGING_1); + delay_ms(WRITE_INTERVAL); + mag.setMode(HMC5883L_MODE_SINGLE); + delay_ms(WRITE_INTERVAL); + +#if IMU_DEBUG_ENABLE + Board::get()->i2c_read_byte(HMC5883L_DEFAULT_ADDRESS, HMC5883L_RA_CONFIG_B, &buffer); + pb_printf("HMC5883L_RA_CONFIG_B=%d", buffer); + Board::get()->i2c_read_byte(HMC5883L_DEFAULT_ADDRESS, HMC5883L_RA_CONFIG_A, &buffer); + pb_printf("HMC5883L_RA_CONFIG_A=%d", buffer); + Board::get()->i2c_read_byte(HMC5883L_DEFAULT_ADDRESS, HMC5883L_RA_MODE, &buffer); + pb_printf("HMC5883L_RA_MODE=%d", buffer); +#endif + + pb_printf("GY87 INIT SUCCESS!"); + + return true; +} + +#define CYCLE_COUNT 2 +void GY87::get_data(float* imu_data) +{ + static int i=0; + + if (i%CYCLE_COUNT==0) { + mpu6050.getMotion6(&ax, &ay, &az, &gx, &gy, &gz); + } else { + mag.getHeading(&mx, &my, &mz); + mag.setMode(HMC5883L_MODE_SINGLE); + } + i++; + +#if IMU_DEBUG_ENABLE +// pb_printf("[%d %d %d] [%d %d %d] [%d %d %d]", ax, ay, az, gx, gy, gz, mx, my, mz); +#endif + + imu_data[0] = ax*ADX_SCALE; + imu_data[1] = ay*ADX_SCALE; + imu_data[2] = az*ADX_SCALE; + imu_data[3] = gx*GRY_SCALE; + imu_data[4] = gy*GRY_SCALE; + imu_data[5] = gz*GRY_SCALE; + imu_data[6] = mx*HMC5883L_SCALE; + imu_data[7] = my*HMC5883L_SCALE; + imu_data[8] = mz*HMC5883L_SCALE; +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY87.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY87.h new file mode 100644 index 0000000..c9063f1 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/GY87.h @@ -0,0 +1,23 @@ +#ifndef IMU_GY87_H_ +#define IMU_GY87_H_ + +#include "imu.h" +#include "MPU6050.h" +#include "HMC5883L.h" + +class GY87 : public IMU +{ +public: + virtual bool init(); + virtual void get_data(float* imu_data); +private: + MPU6050 mpu6050; + HMC5883L mag; + + short ax, ay, az; + short gx, gy, gz; + short mx, my, mz; + short placeholder; +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/HMC5883L.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/HMC5883L.cpp new file mode 100644 index 0000000..723134c --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/HMC5883L.cpp @@ -0,0 +1,260 @@ +#include "HMC5883L.h" +#include "board.h" + +/** Default constructor, uses default I2C address. + * @see HMC5883L_DEFAULT_ADDRESS + */ +HMC5883L::HMC5883L() +{ + devAddr = HMC5883L_DEFAULT_ADDRESS; +} + +/** Specific address constructor. + * @param address I2C address + * @see HMC5883L_DEFAULT_ADDRESS + * @see HMC5883L_ADDRESS + */ +HMC5883L::HMC5883L(unsigned char address) +{ + devAddr = address; +} + +/** Power on and prepare for general usage. + */ +void HMC5883L::initialize() +{ + // write CONFIG_A register + Board::get()->i2c_write_byte(devAddr, HMC5883L_RA_CONFIG_A, + (HMC5883L_AVERAGING_8 << (HMC5883L_CRA_AVERAGE_BIT - HMC5883L_CRA_AVERAGE_LENGTH + 1)) | + (HMC5883L_RATE_15 << (HMC5883L_CRA_RATE_BIT - HMC5883L_CRA_RATE_LENGTH + 1)) | + (HMC5883L_BIAS_NORMAL << (HMC5883L_CRA_BIAS_BIT - HMC5883L_CRA_BIAS_LENGTH + 1))); + + // write CONFIG_B register + setGain(HMC5883L_GAIN_1090); + + // write MODE register + setMode(HMC5883L_MODE_SINGLE); +} + +/** Verify the I2C connection. + * Make sure the device is connected and responds as expected. + * @return True if connection is valid, false otherwise + */ +bool HMC5883L::testConnection() +{ + Board::get()->i2c_read_buf(devAddr, HMC5883L_RA_ID_A, buffer, 3); + + return (buffer[0] == 'H' && buffer[1] == '4' && buffer[2] == '3'); +} + +// CONFIG_A register +/** Set number of samples averaged per measurement. + * @param averaging New samples averaged per measurement setting(0-3 for 1/2/4/8 respectively) + * @see HMC5883L_RA_CONFIG_A + * @see HMC5883L_CRA_AVERAGE_BIT + * @see HMC5883L_CRA_AVERAGE_LENGTH + */ +void HMC5883L::setSampleAveraging(unsigned char averaging) +{ + Board::get()->i2c_write_bits(devAddr, HMC5883L_RA_CONFIG_A, HMC5883L_CRA_AVERAGE_BIT, HMC5883L_CRA_AVERAGE_LENGTH, averaging); +} + +/** Get data output rate value. + * + * Value | Typical Data Output Rate (Hz) + * ------+------------------------------ + * 0 | 0.75 + * 1 | 1.5 + * 2 | 3 + * 3 | 7.5 + * 4 | 15 (Default) + * 5 | 30 + * 6 | 75 + * 7 | Not used + * + * @return Current rate of data output to registers + * @see HMC5883L_RATE_15 + * @see HMC5883L_RA_CONFIG_A + * @see HMC5883L_CRA_RATE_BIT + * @see HMC5883L_CRA_RATE_LENGTH + */ +unsigned char HMC5883L::getDataRate() +{ + Board::get()->i2c_read_buf(devAddr, HMC5883L_RA_CONFIG_A, buffer, 1); + + return (buffer[0] >> (HMC5883L_CRA_RATE_BIT+1-HMC5883L_CRA_RATE_LENGTH)) & (1<i2c_write_bits(devAddr, HMC5883L_RA_CONFIG_A, HMC5883L_CRA_RATE_BIT, HMC5883L_CRA_RATE_LENGTH, rate); +} + +/** Get measurement bias value. + * @return Current bias value (0-2 for normal/positive/negative respectively) + * @see HMC5883L_BIAS_NORMAL + * @see HMC5883L_RA_CONFIG_A + * @see HMC5883L_CRA_BIAS_BIT + * @see HMC5883L_CRA_BIAS_LENGTH + */ +unsigned char HMC5883L::getMeasurementBias() +{ + Board::get()->i2c_read_buf(devAddr, HMC5883L_RA_CONFIG_A, buffer, 1); + + return (buffer[0] >> (HMC5883L_CRA_BIAS_BIT+1-HMC5883L_CRA_BIAS_LENGTH)) & (1<i2c_write_bits(devAddr, HMC5883L_RA_CONFIG_A, HMC5883L_CRA_BIAS_BIT, HMC5883L_CRA_BIAS_LENGTH, bias); +} + +// CONFIG_B register + +/** Get magnetic field gain value. + * The data output range for all settings is 0xF800-0x07FF (-2048 - 2047). + * + * Value | Field Range | Gain (LSB/Gauss) + * ------+-------------+----------------- + * 0 | +/- 0.88 Ga | 1370 + * 1 | +/- 1.3 Ga | 1090 (Default) + * 2 | +/- 1.9 Ga | 820 + * 3 | +/- 2.5 Ga | 660 + * 4 | +/- 4.0 Ga | 440 + * 5 | +/- 4.7 Ga | 390 + * 6 | +/- 5.6 Ga | 330 + * 7 | +/- 8.1 Ga | 230 + * + * @return Current magnetic field gain value + * @see HMC5883L_GAIN_1090 + * @see HMC5883L_RA_CONFIG_B + * @see HMC5883L_CRB_GAIN_BIT + * @see HMC5883L_CRB_GAIN_LENGTH + */ +unsigned char HMC5883L::getGain() +{ + Board::get()->i2c_read_buf(devAddr, HMC5883L_RA_CONFIG_B, buffer, 1); + + return (buffer[0] >> (HMC5883L_CRB_GAIN_BIT+1-HMC5883L_CRB_GAIN_LENGTH)) & (1<i2c_write_byte(devAddr, HMC5883L_RA_CONFIG_B, gain << (HMC5883L_CRB_GAIN_BIT - HMC5883L_CRB_GAIN_LENGTH + 1)); +} + +// MODE register + +/** Get measurement mode. + * + * @return Current measurement mode + * @see HMC5883L_MODE_CONTINUOUS + * @see HMC5883L_MODE_SINGLE + * @see HMC5883L_MODE_IDLE + * @see HMC5883L_RA_MODE + * @see HMC5883L_MODEREG_BIT + * @see HMC5883L_MODEREG_LENGTH + */ +unsigned char HMC5883L::getMode() +{ + Board::get()->i2c_read_buf(devAddr, HMC5883L_RA_MODE, buffer, 1); + + return (buffer[0] >> (HMC5883L_MODEREG_BIT+1-HMC5883L_MODEREG_LENGTH)) & (1<i2c_write_byte(devAddr, HMC5883L_RA_MODE, newMode << (HMC5883L_MODEREG_BIT - HMC5883L_MODEREG_LENGTH + 1)); + mode = newMode; // track to tell if we have to clear bit 7 after a read +} + +// DATA* registers + +/** Get 3-axis heading measurements. + * + * @param x 16-bit signed integer container for X-axis heading + * @param y 16-bit signed integer container for Y-axis heading + * @param z 16-bit signed integer container for Z-axis heading + * @see HMC5883L_RA_DATAX_H + */ +void HMC5883L::getHeading(short *x, short *y, short *z) +{ + Board::get()->i2c_read_buf(devAddr, HMC5883L_RA_DATAX_H, buffer, 6); + if (mode == HMC5883L_MODE_SINGLE) + Board::get()->i2c_write_byte(devAddr, HMC5883L_RA_MODE, HMC5883L_MODE_SINGLE << (HMC5883L_MODEREG_BIT - HMC5883L_MODEREG_LENGTH + 1)); + + *x = (((short)buffer[0]) << 8) | buffer[1]; + *y = (((short)buffer[4]) << 8) | buffer[5]; + *z = (((short)buffer[2]) << 8) | buffer[3]; +} + +// STATUS register +/** Get data ready status. + * @return Data ready status + * @see HMC5883L_RA_STATUS + * @see HMC5883L_STATUS_READY_BIT + */ +bool HMC5883L::getReadyStatus() +{ + Board::get()->i2c_read_buf(devAddr, HMC5883L_RA_STATUS, buffer, 1); + + return (buffer[0] >> (HMC5883L_STATUS_READY_BIT)) & (1<<1-1); +} + +// ID_* registers + +/** Get identification byte A + * @return ID_A byte (should be 01001000, ASCII value 'H') + */ +unsigned char HMC5883L::getIDA() +{ + Board::get()->i2c_read_buf(devAddr, HMC5883L_RA_ID_A, buffer, 1); + return buffer[0]; +} +/** Get identification byte B + * @return ID_A byte (should be 00110100, ASCII value '4') + */ +unsigned char HMC5883L::getIDB() +{ + Board::get()->i2c_read_buf(devAddr, HMC5883L_RA_ID_B, buffer, 1); + return buffer[0]; +} +/** Get identification byte C + * @return ID_A byte (should be 00110011, ASCII value '3') + */ +unsigned char HMC5883L::getIDC() +{ + Board::get()->i2c_read_buf(devAddr, HMC5883L_RA_ID_C, buffer, 1); + return buffer[0]; +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/HMC5883L.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/HMC5883L.h new file mode 100644 index 0000000..2eeec84 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/HMC5883L.h @@ -0,0 +1,107 @@ +#ifndef _HMC5883L_H_ +#define _HMC5883L_H_ + +#define HMC5883L_ADDRESS 0x1E // this device only has one address +#define HMC5883L_DEFAULT_ADDRESS 0x1E + +#define HMC5883L_RA_CONFIG_A 0x00 +#define HMC5883L_RA_CONFIG_B 0x01 +#define HMC5883L_RA_MODE 0x02 +#define HMC5883L_RA_DATAX_H 0x03 +#define HMC5883L_RA_DATAX_L 0x04 +#define HMC5883L_RA_DATAZ_H 0x05 +#define HMC5883L_RA_DATAZ_L 0x06 +#define HMC5883L_RA_DATAY_H 0x07 +#define HMC5883L_RA_DATAY_L 0x08 +#define HMC5883L_RA_STATUS 0x09 +#define HMC5883L_RA_ID_A 0x0A +#define HMC5883L_RA_ID_B 0x0B +#define HMC5883L_RA_ID_C 0x0C + +#define HMC5883L_CRA_AVERAGE_BIT 6 +#define HMC5883L_CRA_AVERAGE_LENGTH 2 +#define HMC5883L_CRA_RATE_BIT 4 +#define HMC5883L_CRA_RATE_LENGTH 3 +#define HMC5883L_CRA_BIAS_BIT 1 +#define HMC5883L_CRA_BIAS_LENGTH 2 + +#define HMC5883L_AVERAGING_1 0x00 +#define HMC5883L_AVERAGING_2 0x01 +#define HMC5883L_AVERAGING_4 0x02 +#define HMC5883L_AVERAGING_8 0x03 + +#define HMC5883L_RATE_0P75 0x00 +#define HMC5883L_RATE_1P5 0x01 +#define HMC5883L_RATE_3 0x02 +#define HMC5883L_RATE_7P5 0x03 +#define HMC5883L_RATE_15 0x04 +#define HMC5883L_RATE_30 0x05 +#define HMC5883L_RATE_75 0x06 + +#define HMC5883L_BIAS_NORMAL 0x00 +#define HMC5883L_BIAS_POSITIVE 0x01 +#define HMC5883L_BIAS_NEGATIVE 0x02 + +#define HMC5883L_CRB_GAIN_BIT 7 +#define HMC5883L_CRB_GAIN_LENGTH 3 + +#define HMC5883L_GAIN_1370 0x00 +#define HMC5883L_GAIN_1090 0x01 +#define HMC5883L_GAIN_820 0x02 +#define HMC5883L_GAIN_660 0x03 +#define HMC5883L_GAIN_440 0x04 +#define HMC5883L_GAIN_390 0x05 +#define HMC5883L_GAIN_330 0x06 +#define HMC5883L_GAIN_220 0x07 + +#define HMC5883L_MODEREG_BIT 1 +#define HMC5883L_MODEREG_LENGTH 2 + +#define HMC5883L_MODE_CONTINUOUS 0x00 +#define HMC5883L_MODE_SINGLE 0x01 +#define HMC5883L_MODE_IDLE 0x02 + +#define HMC5883L_STATUS_LOCK_BIT 1 +#define HMC5883L_STATUS_READY_BIT 0 + +class HMC5883L { +public: + HMC5883L(); + HMC5883L(unsigned char address); + + void initialize(); + bool testConnection(); + + // CONFIG_A register + void setSampleAveraging(unsigned char averaging); + unsigned char getDataRate(); + void setDataRate(unsigned char rate); + unsigned char getMeasurementBias(); + void setMeasurementBias(unsigned char bias); + + // CONFIG_B register + unsigned char getGain(); + void setGain(unsigned char gain); + + // MODE register + unsigned char getMode(); + void setMode(unsigned char mode); + + // DATA* registers + void getHeading(short *x, short *y, short *z); + + // STATUS register + bool getReadyStatus(); + + // ID_* registers + unsigned char getIDA(); + unsigned char getIDB(); + unsigned char getIDC(); + +private: + unsigned char devAddr; + unsigned char buffer[6]; + unsigned char mode; +}; + +#endif /* _HMC5883L_H_ */ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/ITG3200.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/ITG3200.cpp new file mode 100644 index 0000000..4dfb602 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/ITG3200.cpp @@ -0,0 +1,123 @@ +#include "ITG3200.h" +#include "board.h" + +ITG3200::ITG3200() +{ + devAddr = ITG3200_DEFAULT_ADDRESS; +} + +ITG3200::ITG3200(unsigned char address) +{ + devAddr = address; +} + +void ITG3200::initialize() +{ + setFullScaleRange(ITG3200_FULLSCALE_2000); + setClockSource(ITG3200_CLOCK_PLL_XGYRO); +} + +bool ITG3200::testConnection() +{ + return getDeviceID() == 0x34; +} + +// WHO_AM_I register +unsigned char ITG3200::getDeviceID() +{ + Board::get()->i2c_read_bits(devAddr, ITG3200_RA_WHO_AM_I, ITG3200_DEVID_BIT, ITG3200_DEVID_LENGTH, buffer); + return buffer[0]; +} + +// SMPLRT_DIV register +/** Set sample rate. + * @param rate New sample rate + * @see getRate() + * @see setDLPFBandwidth() + * @see ITG3200_RA_SMPLRT_DIV + */ +void ITG3200::setRate(unsigned char rate) +{ + Board::get()->i2c_write_byte(devAddr, ITG3200_RA_SMPLRT_DIV, rate); +} + +/** Set full-scale range setting. + * @param range New full-scale range value + * @see getFullScaleRange() + * @see ITG3200_FULLSCALE_2000 + * @see ITG3200_RA_DLPF_FS + * @see ITG3200_DF_FS_SEL_BIT + * @see ITG3200_DF_FS_SEL_LENGTH + */ +void ITG3200::setFullScaleRange(unsigned char range) +{ + Board::get()->i2c_write_bits(devAddr, ITG3200_RA_DLPF_FS, ITG3200_DF_FS_SEL_BIT, ITG3200_DF_FS_SEL_LENGTH, range); +} + +/** Set digital low-pass filter bandwidth. + * @param bandwidth New DLFP bandwidth setting + * @see getDLPFBandwidth() + * @see ITG3200_DLPF_BW_256 + * @see ITG3200_RA_DLPF_FS + * @see ITG3200_DF_DLPF_CFG_BIT + * @see ITG3200_DF_DLPF_CFG_LENGTH + */ +void ITG3200::setDLPFBandwidth(unsigned char bandwidth) +{ + Board::get()->i2c_write_bits(devAddr, ITG3200_RA_DLPF_FS, ITG3200_DF_DLPF_CFG_BIT, ITG3200_DF_DLPF_CFG_LENGTH, bandwidth); +} + +// GYRO_*OUT_* registers + +/** Get 3-axis gyroscope readings. + * @param x 16-bit signed integer container for X-axis rotation + * @param y 16-bit signed integer container for Y-axis rotation + * @param z 16-bit signed integer container for Z-axis rotation + * @see ITG3200_RA_GYRO_XOUT_H + */ +void ITG3200::getRotation(short* x, short* y, short* z) +{ + Board::get()->i2c_read_buf(devAddr, ITG3200_RA_GYRO_XOUT_H, buffer, 6); + *x = (((short)buffer[0]) << 8) | buffer[1]; + *y = (((short)buffer[2]) << 8) | buffer[3]; + *z = (((short)buffer[4]) << 8) | buffer[5]; +} + +// PWR_MGM register + +/** Trigger a full device reset. + * A small delay of ~50ms may be desirable after triggering a reset. + * @see ITG3200_RA_PWR_MGM + * @see ITG3200_PWR_H_RESET_BIT + */ +void ITG3200::reset() +{ + Board::get()->i2c_write_bit(devAddr, ITG3200_RA_PWR_MGM, ITG3200_PWR_H_RESET_BIT, true); +} + +/** Set clock source setting. + * On power up, the ITG-3200 defaults to the internal oscillator. It is highly recommended that the device is configured to use one of the gyros (or an external clock) as the clock reference, due to the improved stability. + * + * The CLK_SEL setting determines the device clock source as follows: + * + * CLK_SEL | Clock Source + * --------+-------------------------------------- + * 0 | Internal oscillator + * 1 | PLL with X Gyro reference + * 2 | PLL with Y Gyro reference + * 3 | PLL with Z Gyro reference + * 4 | PLL with external 32.768kHz reference + * 5 | PLL with external 19.2MHz reference + * 6 | Reserved + * 7 | Reserved + * + * @param source New clock source setting + * @see getClockSource() + * @see ITG3200_RA_PWR_MGM + * @see ITG3200_PWR_CLK_SEL_BIT + * @see ITG3200_PWR_CLK_SEL_LENGTH + */ +void ITG3200::setClockSource(unsigned char source) +{ + Board::get()->i2c_write_bits(devAddr, ITG3200_RA_PWR_MGM, ITG3200_PWR_CLK_SEL_BIT, ITG3200_PWR_CLK_SEL_LENGTH, source); +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/ITG3200.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/ITG3200.h new file mode 100644 index 0000000..c6b53b0 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/ITG3200.h @@ -0,0 +1,108 @@ +#ifndef _ITG3200_H_ +#define _ITG3200_H_ + +#define ITG3200_ADDRESS_AD0_LOW 0x68 // address pin low (GND), default for SparkFun IMU Digital Combo board +#define ITG3200_ADDRESS_AD0_HIGH 0x69 // address pin high (VCC), default for SparkFun ITG-3200 Breakout board +#define ITG3200_DEFAULT_ADDRESS ITG3200_ADDRESS_AD0_LOW + +#define ITG3200_RA_WHO_AM_I 0x00 +#define ITG3200_RA_SMPLRT_DIV 0x15 +#define ITG3200_RA_DLPF_FS 0x16 +#define ITG3200_RA_INT_CFG 0x17 +#define ITG3200_RA_INT_STATUS 0x1A +#define ITG3200_RA_TEMP_OUT_H 0x1B +#define ITG3200_RA_TEMP_OUT_L 0x1C +#define ITG3200_RA_GYRO_XOUT_H 0x1D +#define ITG3200_RA_GYRO_XOUT_L 0x1E +#define ITG3200_RA_GYRO_YOUT_H 0x1F +#define ITG3200_RA_GYRO_YOUT_L 0x20 +#define ITG3200_RA_GYRO_ZOUT_H 0x21 +#define ITG3200_RA_GYRO_ZOUT_L 0x22 +#define ITG3200_RA_PWR_MGM 0x3E + +#define ITG3200_DEVID_BIT 6 +#define ITG3200_DEVID_LENGTH 6 + +#define ITG3200_DF_FS_SEL_BIT 4 +#define ITG3200_DF_FS_SEL_LENGTH 2 +#define ITG3200_DF_DLPF_CFG_BIT 2 +#define ITG3200_DF_DLPF_CFG_LENGTH 3 + +#define ITG3200_FULLSCALE_2000 0x03 + +#define ITG3200_DLPF_BW_256 0x00 +#define ITG3200_DLPF_BW_188 0x01 +#define ITG3200_DLPF_BW_98 0x02 +#define ITG3200_DLPF_BW_42 0x03 +#define ITG3200_DLPF_BW_20 0x04 +#define ITG3200_DLPF_BW_10 0x05 +#define ITG3200_DLPF_BW_5 0x06 + +#define ITG3200_INTCFG_ACTL_BIT 7 +#define ITG3200_INTCFG_OPEN_BIT 6 +#define ITG3200_INTCFG_LATCH_INT_EN_BIT 5 +#define ITG3200_INTCFG_INT_ANYRD_2CLEAR_BIT 4 +#define ITG3200_INTCFG_ITG_RDY_EN_BIT 2 +#define ITG3200_INTCFG_RAW_RDY_EN_BIT 0 + +#define ITG3200_INTMODE_ACTIVEHIGH 0x00 +#define ITG3200_INTMODE_ACTIVELOW 0x01 + +#define ITG3200_INTDRV_PUSHPULL 0x00 +#define ITG3200_INTDRV_OPENDRAIN 0x01 + +#define ITG3200_INTLATCH_50USPULSE 0x00 +#define ITG3200_INTLATCH_WAITCLEAR 0x01 + +#define ITG3200_INTCLEAR_STATUSREAD 0x00 +#define ITG3200_INTCLEAR_ANYREAD 0x01 + +#define ITG3200_INTSTAT_ITG_RDY_BIT 2 +#define ITG3200_INTSTAT_RAW_DATA_READY_BIT 0 + +#define ITG3200_PWR_H_RESET_BIT 7 +#define ITG3200_PWR_SLEEP_BIT 6 +#define ITG3200_PWR_STBY_XG_BIT 5 +#define ITG3200_PWR_STBY_YG_BIT 4 +#define ITG3200_PWR_STBY_ZG_BIT 3 +#define ITG3200_PWR_CLK_SEL_BIT 2 +#define ITG3200_PWR_CLK_SEL_LENGTH 3 + +#define ITG3200_CLOCK_INTERNAL 0x00 +#define ITG3200_CLOCK_PLL_XGYRO 0x01 +#define ITG3200_CLOCK_PLL_YGYRO 0x02 +#define ITG3200_CLOCK_PLL_ZGYRO 0x03 +#define ITG3200_CLOCK_PLL_EXT32K 0x04 +#define ITG3200_CLOCK_PLL_EXT19M 0x05 + +class ITG3200 { +public: + ITG3200(); + ITG3200(unsigned char address); + + void initialize(); + bool testConnection(); + + // WHO_AM_I register + unsigned char getDeviceID(); + + // SMPLRT_DIV register + void setRate(unsigned char rate); + + // DLPF_FS register + void setFullScaleRange(unsigned char range); + void setDLPFBandwidth(unsigned char bandwidth); + + // GYRO_*OUT_* registers + void getRotation(short* x, short* y, short* z); + + // PWR_MGM register + void reset(); + void setClockSource(unsigned char source); + +private: + unsigned char devAddr; + unsigned char buffer[6]; +}; + +#endif /* _ITG3200_H_ */ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/MPU6050.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/MPU6050.cpp new file mode 100644 index 0000000..fa69919 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/MPU6050.cpp @@ -0,0 +1,79 @@ +#include "MPU6050.h" +#include "board.h" +#include "delay.h" +#include "print.h" + +MPU6050::MPU6050(uint8_t address):devAddr(address) +{ +} + +void MPU6050::initialize() +{ + Board::get()->i2c_write_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_PWR_MGMT_1, 0x80); // 设备复位 + delay_ms(5); + Board::get()->i2c_write_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_PWR_MGMT_1, 0x01); //设置设备时钟源 + delay_ms(5); + Board::get()->i2c_write_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_CONFIG , MPU6050_DLPF_BW_42); //低通滤波 acc: 44hz, gyro: 42hz + delay_ms(5); + Board::get()->i2c_write_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_SMPLRT_DIV, 0x00); + delay_ms(5); + Board::get()->i2c_write_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_GYRO_CONFIG, MPU6050_GYRO_FS_2000<<3); + delay_ms(5); + Board::get()->i2c_write_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_ACCEL_CONFIG, MPU6050_ACCEL_FS_8<<3); + delay_ms(5); + + Board::get()->i2c_write_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_USER_CTRL,0X00); + delay_ms(5); + Board::get()->i2c_write_byte(MPU6050_DEFAULT_ADDRESS, MPU6050_RA_INT_PIN_CFG, 0x02); + delay_ms(5); +} + +bool MPU6050::testConnection() +{ + uint8_t id = getDeviceID(); + return (id == 0x39) || (id == 0x34); +} + +void MPU6050::setRate(uint8_t rate) +{ + Board::get()->i2c_write_byte(devAddr, MPU6050_RA_SMPLRT_DIV, rate); +} + +void MPU6050::setExternalFrameSync(uint8_t sync) +{ + Board::get()->i2c_write_bits(devAddr, MPU6050_RA_CONFIG, MPU6050_CFG_EXT_SYNC_SET_BIT, MPU6050_CFG_EXT_SYNC_SET_LENGTH, sync); +} + +void MPU6050::setFullScaleGyroRange(uint8_t range) +{ + Board::get()->i2c_write_bits(devAddr, MPU6050_RA_GYRO_CONFIG, MPU6050_GCONFIG_FS_SEL_BIT, MPU6050_GCONFIG_FS_SEL_LENGTH, range); +} + +void MPU6050::setFullScaleAccelRange(uint8_t range) +{ + Board::get()->i2c_write_bits(devAddr, MPU6050_RA_ACCEL_CONFIG, MPU6050_ACONFIG_AFS_SEL_BIT, MPU6050_ACONFIG_AFS_SEL_LENGTH, range); +} + +void MPU6050::getMotion6(int16_t* ax, int16_t* ay, int16_t* az, int16_t* gx, int16_t* gy, int16_t* gz) +{ + Board::get()->i2c_read_buf(devAddr, MPU6050_RA_ACCEL_XOUT_H, buffer, 14); + *ax = (((int16_t)buffer[0]) << 8) | buffer[1]; + *ay = (((int16_t)buffer[2]) << 8) | buffer[3]; + *az = (((int16_t)buffer[4]) << 8) | buffer[5]; + *gx = (((int16_t)buffer[8]) << 8) | buffer[9]; + *gy = (((int16_t)buffer[10]) << 8) | buffer[11]; + *gz = (((int16_t)buffer[12]) << 8) | buffer[13]; +} + +void MPU6050::reset() +{ + Board::get()->i2c_write_bits(devAddr, MPU6050_RA_PWR_MGMT_1, MPU6050_PWR1_DEVICE_RESET_BIT, 1, 1); +} + +uint8_t MPU6050::getDeviceID() +{ + buffer[0]=0xff; + Board::get()->i2c_read_bits(devAddr, MPU6050_RA_WHO_AM_I, MPU6050_WHO_AM_I_BIT, MPU6050_WHO_AM_I_LENGTH, buffer); + pb_printf("MPU6050 id: 0x%02x", buffer[0]); + return buffer[0]; +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/MPU6050.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/MPU6050.h new file mode 100644 index 0000000..caee268 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/MPU6050.h @@ -0,0 +1,429 @@ + +#ifndef _MPU6050_H_ +#define _MPU6050_H_ + +#include + +#ifdef __AVR__ +#include +#else + +#endif + + +#define MPU6050_ADDRESS_AD0_LOW 0x68 // address pin low (GND), default for InvenSense evaluation board +#define MPU6050_ADDRESS_AD0_HIGH 0x69 // address pin high (VCC) +#define MPU6050_DEFAULT_ADDRESS MPU6050_ADDRESS_AD0_LOW + +#define MPU6050_RA_XG_OFFS_TC 0x00 //[7] PWR_MODE, [6:1] XG_OFFS_TC, [0] OTP_BNK_VLD +#define MPU6050_RA_YG_OFFS_TC 0x01 //[7] PWR_MODE, [6:1] YG_OFFS_TC, [0] OTP_BNK_VLD +#define MPU6050_RA_ZG_OFFS_TC 0x02 //[7] PWR_MODE, [6:1] ZG_OFFS_TC, [0] OTP_BNK_VLD +#define MPU6050_RA_X_FINE_GAIN 0x03 //[7:0] X_FINE_GAIN +#define MPU6050_RA_Y_FINE_GAIN 0x04 //[7:0] Y_FINE_GAIN +#define MPU6050_RA_Z_FINE_GAIN 0x05 //[7:0] Z_FINE_GAIN +#define MPU6050_RA_XA_OFFS_H 0x06 //[15:0] XA_OFFS +#define MPU6050_RA_XA_OFFS_L_TC 0x07 +#define MPU6050_RA_YA_OFFS_H 0x08 //[15:0] YA_OFFS +#define MPU6050_RA_YA_OFFS_L_TC 0x09 +#define MPU6050_RA_ZA_OFFS_H 0x0A //[15:0] ZA_OFFS +#define MPU6050_RA_ZA_OFFS_L_TC 0x0B +#define MPU6050_RA_SELF_TEST_X 0x0D //[7:5] XA_TEST[4-2], [4:0] XG_TEST[4-0] +#define MPU6050_RA_SELF_TEST_Y 0x0E //[7:5] YA_TEST[4-2], [4:0] YG_TEST[4-0] +#define MPU6050_RA_SELF_TEST_Z 0x0F //[7:5] ZA_TEST[4-2], [4:0] ZG_TEST[4-0] +#define MPU6050_RA_SELF_TEST_A 0x10 //[5:4] XA_TEST[1-0], [3:2] YA_TEST[1-0], [1:0] ZA_TEST[1-0] +#define MPU6050_RA_XG_OFFS_USRH 0x13 //[15:0] XG_OFFS_USR +#define MPU6050_RA_XG_OFFS_USRL 0x14 +#define MPU6050_RA_YG_OFFS_USRH 0x15 //[15:0] YG_OFFS_USR +#define MPU6050_RA_YG_OFFS_USRL 0x16 +#define MPU6050_RA_ZG_OFFS_USRH 0x17 //[15:0] ZG_OFFS_USR +#define MPU6050_RA_ZG_OFFS_USRL 0x18 +#define MPU6050_RA_SMPLRT_DIV 0x19 +#define MPU6050_RA_CONFIG 0x1A +#define MPU6050_RA_GYRO_CONFIG 0x1B +#define MPU6050_RA_ACCEL_CONFIG 0x1C +#define MPU6050_RA_FF_THR 0x1D +#define MPU6050_RA_FF_DUR 0x1E +#define MPU6050_RA_MOT_THR 0x1F +#define MPU6050_RA_MOT_DUR 0x20 +#define MPU6050_RA_ZRMOT_THR 0x21 +#define MPU6050_RA_ZRMOT_DUR 0x22 +#define MPU6050_RA_FIFO_EN 0x23 +#define MPU6050_RA_I2C_MST_CTRL 0x24 +#define MPU6050_RA_I2C_SLV0_ADDR 0x25 +#define MPU6050_RA_I2C_SLV0_REG 0x26 +#define MPU6050_RA_I2C_SLV0_CTRL 0x27 +#define MPU6050_RA_I2C_SLV1_ADDR 0x28 +#define MPU6050_RA_I2C_SLV1_REG 0x29 +#define MPU6050_RA_I2C_SLV1_CTRL 0x2A +#define MPU6050_RA_I2C_SLV2_ADDR 0x2B +#define MPU6050_RA_I2C_SLV2_REG 0x2C +#define MPU6050_RA_I2C_SLV2_CTRL 0x2D +#define MPU6050_RA_I2C_SLV3_ADDR 0x2E +#define MPU6050_RA_I2C_SLV3_REG 0x2F +#define MPU6050_RA_I2C_SLV3_CTRL 0x30 +#define MPU6050_RA_I2C_SLV4_ADDR 0x31 +#define MPU6050_RA_I2C_SLV4_REG 0x32 +#define MPU6050_RA_I2C_SLV4_DO 0x33 +#define MPU6050_RA_I2C_SLV4_CTRL 0x34 +#define MPU6050_RA_I2C_SLV4_DI 0x35 +#define MPU6050_RA_I2C_MST_STATUS 0x36 +#define MPU6050_RA_INT_PIN_CFG 0x37 +#define MPU6050_RA_INT_ENABLE 0x38 +#define MPU6050_RA_DMP_INT_STATUS 0x39 +#define MPU6050_RA_INT_STATUS 0x3A +#define MPU6050_RA_ACCEL_XOUT_H 0x3B +#define MPU6050_RA_ACCEL_XOUT_L 0x3C +#define MPU6050_RA_ACCEL_YOUT_H 0x3D +#define MPU6050_RA_ACCEL_YOUT_L 0x3E +#define MPU6050_RA_ACCEL_ZOUT_H 0x3F +#define MPU6050_RA_ACCEL_ZOUT_L 0x40 +#define MPU6050_RA_TEMP_OUT_H 0x41 +#define MPU6050_RA_TEMP_OUT_L 0x42 +#define MPU6050_RA_GYRO_XOUT_H 0x43 +#define MPU6050_RA_GYRO_XOUT_L 0x44 +#define MPU6050_RA_GYRO_YOUT_H 0x45 +#define MPU6050_RA_GYRO_YOUT_L 0x46 +#define MPU6050_RA_GYRO_ZOUT_H 0x47 +#define MPU6050_RA_GYRO_ZOUT_L 0x48 +#define MPU6050_RA_EXT_SENS_DATA_00 0x49 +#define MPU6050_RA_EXT_SENS_DATA_01 0x4A +#define MPU6050_RA_EXT_SENS_DATA_02 0x4B +#define MPU6050_RA_EXT_SENS_DATA_03 0x4C +#define MPU6050_RA_EXT_SENS_DATA_04 0x4D +#define MPU6050_RA_EXT_SENS_DATA_05 0x4E +#define MPU6050_RA_EXT_SENS_DATA_06 0x4F +#define MPU6050_RA_EXT_SENS_DATA_07 0x50 +#define MPU6050_RA_EXT_SENS_DATA_08 0x51 +#define MPU6050_RA_EXT_SENS_DATA_09 0x52 +#define MPU6050_RA_EXT_SENS_DATA_10 0x53 +#define MPU6050_RA_EXT_SENS_DATA_11 0x54 +#define MPU6050_RA_EXT_SENS_DATA_12 0x55 +#define MPU6050_RA_EXT_SENS_DATA_13 0x56 +#define MPU6050_RA_EXT_SENS_DATA_14 0x57 +#define MPU6050_RA_EXT_SENS_DATA_15 0x58 +#define MPU6050_RA_EXT_SENS_DATA_16 0x59 +#define MPU6050_RA_EXT_SENS_DATA_17 0x5A +#define MPU6050_RA_EXT_SENS_DATA_18 0x5B +#define MPU6050_RA_EXT_SENS_DATA_19 0x5C +#define MPU6050_RA_EXT_SENS_DATA_20 0x5D +#define MPU6050_RA_EXT_SENS_DATA_21 0x5E +#define MPU6050_RA_EXT_SENS_DATA_22 0x5F +#define MPU6050_RA_EXT_SENS_DATA_23 0x60 +#define MPU6050_RA_MOT_DETECT_STATUS 0x61 +#define MPU6050_RA_I2C_SLV0_DO 0x63 +#define MPU6050_RA_I2C_SLV1_DO 0x64 +#define MPU6050_RA_I2C_SLV2_DO 0x65 +#define MPU6050_RA_I2C_SLV3_DO 0x66 +#define MPU6050_RA_I2C_MST_DELAY_CTRL 0x67 +#define MPU6050_RA_SIGNAL_PATH_RESET 0x68 +#define MPU6050_RA_MOT_DETECT_CTRL 0x69 +#define MPU6050_RA_USER_CTRL 0x6A +#define MPU6050_RA_PWR_MGMT_1 0x6B +#define MPU6050_RA_PWR_MGMT_2 0x6C +#define MPU6050_RA_BANK_SEL 0x6D +#define MPU6050_RA_MEM_START_ADDR 0x6E +#define MPU6050_RA_MEM_R_W 0x6F +#define MPU6050_RA_DMP_CFG_1 0x70 +#define MPU6050_RA_DMP_CFG_2 0x71 +#define MPU6050_RA_FIFO_COUNTH 0x72 +#define MPU6050_RA_FIFO_COUNTL 0x73 +#define MPU6050_RA_FIFO_R_W 0x74 +#define MPU6050_RA_WHO_AM_I 0x75 + +#define MPU6050_SELF_TEST_XA_1_BIT 0x07 +#define MPU6050_SELF_TEST_XA_1_LENGTH 0x03 +#define MPU6050_SELF_TEST_XA_2_BIT 0x05 +#define MPU6050_SELF_TEST_XA_2_LENGTH 0x02 +#define MPU6050_SELF_TEST_YA_1_BIT 0x07 +#define MPU6050_SELF_TEST_YA_1_LENGTH 0x03 +#define MPU6050_SELF_TEST_YA_2_BIT 0x03 +#define MPU6050_SELF_TEST_YA_2_LENGTH 0x02 +#define MPU6050_SELF_TEST_ZA_1_BIT 0x07 +#define MPU6050_SELF_TEST_ZA_1_LENGTH 0x03 +#define MPU6050_SELF_TEST_ZA_2_BIT 0x01 +#define MPU6050_SELF_TEST_ZA_2_LENGTH 0x02 + +#define MPU6050_SELF_TEST_XG_1_BIT 0x04 +#define MPU6050_SELF_TEST_XG_1_LENGTH 0x05 +#define MPU6050_SELF_TEST_YG_1_BIT 0x04 +#define MPU6050_SELF_TEST_YG_1_LENGTH 0x05 +#define MPU6050_SELF_TEST_ZG_1_BIT 0x04 +#define MPU6050_SELF_TEST_ZG_1_LENGTH 0x05 + +#define MPU6050_TC_PWR_MODE_BIT 7 +#define MPU6050_TC_OFFSET_BIT 6 +#define MPU6050_TC_OFFSET_LENGTH 6 +#define MPU6050_TC_OTP_BNK_VLD_BIT 0 + +#define MPU6050_VDDIO_LEVEL_VLOGIC 0 +#define MPU6050_VDDIO_LEVEL_VDD 1 + +#define MPU6050_CFG_EXT_SYNC_SET_BIT 5 +#define MPU6050_CFG_EXT_SYNC_SET_LENGTH 3 +#define MPU6050_CFG_DLPF_CFG_BIT 2 +#define MPU6050_CFG_DLPF_CFG_LENGTH 3 + +#define MPU6050_EXT_SYNC_DISABLED 0x0 +#define MPU6050_EXT_SYNC_TEMP_OUT_L 0x1 +#define MPU6050_EXT_SYNC_GYRO_XOUT_L 0x2 +#define MPU6050_EXT_SYNC_GYRO_YOUT_L 0x3 +#define MPU6050_EXT_SYNC_GYRO_ZOUT_L 0x4 +#define MPU6050_EXT_SYNC_ACCEL_XOUT_L 0x5 +#define MPU6050_EXT_SYNC_ACCEL_YOUT_L 0x6 +#define MPU6050_EXT_SYNC_ACCEL_ZOUT_L 0x7 + +#define MPU6050_DLPF_BW_256 0x00 +#define MPU6050_DLPF_BW_188 0x01 +#define MPU6050_DLPF_BW_98 0x02 +#define MPU6050_DLPF_BW_42 0x03 +#define MPU6050_DLPF_BW_20 0x04 +#define MPU6050_DLPF_BW_10 0x05 +#define MPU6050_DLPF_BW_5 0x06 + +#define MPU6050_GCONFIG_FS_SEL_BIT 4 +#define MPU6050_GCONFIG_FS_SEL_LENGTH 2 + +#define MPU6050_GYRO_FS_250 0x00 +#define MPU6050_GYRO_FS_500 0x01 +#define MPU6050_GYRO_FS_1000 0x02 +#define MPU6050_GYRO_FS_2000 0x03 + +#define MPU6050_ACONFIG_XA_ST_BIT 7 +#define MPU6050_ACONFIG_YA_ST_BIT 6 +#define MPU6050_ACONFIG_ZA_ST_BIT 5 +#define MPU6050_ACONFIG_AFS_SEL_BIT 4 +#define MPU6050_ACONFIG_AFS_SEL_LENGTH 2 +#define MPU6050_ACONFIG_ACCEL_HPF_BIT 2 +#define MPU6050_ACONFIG_ACCEL_HPF_LENGTH 3 + +#define MPU6050_ACCEL_FS_2 0x00 +#define MPU6050_ACCEL_FS_4 0x01 +#define MPU6050_ACCEL_FS_8 0x02 +#define MPU6050_ACCEL_FS_16 0x03 + +#define MPU6050_DHPF_RESET 0x00 +#define MPU6050_DHPF_5 0x01 +#define MPU6050_DHPF_2P5 0x02 +#define MPU6050_DHPF_1P25 0x03 +#define MPU6050_DHPF_0P63 0x04 +#define MPU6050_DHPF_HOLD 0x07 + +#define MPU6050_TEMP_FIFO_EN_BIT 7 +#define MPU6050_XG_FIFO_EN_BIT 6 +#define MPU6050_YG_FIFO_EN_BIT 5 +#define MPU6050_ZG_FIFO_EN_BIT 4 +#define MPU6050_ACCEL_FIFO_EN_BIT 3 +#define MPU6050_SLV2_FIFO_EN_BIT 2 +#define MPU6050_SLV1_FIFO_EN_BIT 1 +#define MPU6050_SLV0_FIFO_EN_BIT 0 + +#define MPU6050_MULT_MST_EN_BIT 7 +#define MPU6050_WAIT_FOR_ES_BIT 6 +#define MPU6050_SLV_3_FIFO_EN_BIT 5 +#define MPU6050_I2C_MST_P_NSR_BIT 4 +#define MPU6050_I2C_MST_CLK_BIT 3 +#define MPU6050_I2C_MST_CLK_LENGTH 4 + +#define MPU6050_CLOCK_DIV_348 0x0 +#define MPU6050_CLOCK_DIV_333 0x1 +#define MPU6050_CLOCK_DIV_320 0x2 +#define MPU6050_CLOCK_DIV_308 0x3 +#define MPU6050_CLOCK_DIV_296 0x4 +#define MPU6050_CLOCK_DIV_286 0x5 +#define MPU6050_CLOCK_DIV_276 0x6 +#define MPU6050_CLOCK_DIV_267 0x7 +#define MPU6050_CLOCK_DIV_258 0x8 +#define MPU6050_CLOCK_DIV_500 0x9 +#define MPU6050_CLOCK_DIV_471 0xA +#define MPU6050_CLOCK_DIV_444 0xB +#define MPU6050_CLOCK_DIV_421 0xC +#define MPU6050_CLOCK_DIV_400 0xD +#define MPU6050_CLOCK_DIV_381 0xE +#define MPU6050_CLOCK_DIV_364 0xF + +#define MPU6050_I2C_SLV_RW_BIT 7 +#define MPU6050_I2C_SLV_ADDR_BIT 6 +#define MPU6050_I2C_SLV_ADDR_LENGTH 7 +#define MPU6050_I2C_SLV_EN_BIT 7 +#define MPU6050_I2C_SLV_BYTE_SW_BIT 6 +#define MPU6050_I2C_SLV_REG_DIS_BIT 5 +#define MPU6050_I2C_SLV_GRP_BIT 4 +#define MPU6050_I2C_SLV_LEN_BIT 3 +#define MPU6050_I2C_SLV_LEN_LENGTH 4 + +#define MPU6050_I2C_SLV4_RW_BIT 7 +#define MPU6050_I2C_SLV4_ADDR_BIT 6 +#define MPU6050_I2C_SLV4_ADDR_LENGTH 7 +#define MPU6050_I2C_SLV4_EN_BIT 7 +#define MPU6050_I2C_SLV4_INT_EN_BIT 6 +#define MPU6050_I2C_SLV4_REG_DIS_BIT 5 +#define MPU6050_I2C_SLV4_MST_DLY_BIT 4 +#define MPU6050_I2C_SLV4_MST_DLY_LENGTH 5 + +#define MPU6050_MST_PASS_THROUGH_BIT 7 +#define MPU6050_MST_I2C_SLV4_DONE_BIT 6 +#define MPU6050_MST_I2C_LOST_ARB_BIT 5 +#define MPU6050_MST_I2C_SLV4_NACK_BIT 4 +#define MPU6050_MST_I2C_SLV3_NACK_BIT 3 +#define MPU6050_MST_I2C_SLV2_NACK_BIT 2 +#define MPU6050_MST_I2C_SLV1_NACK_BIT 1 +#define MPU6050_MST_I2C_SLV0_NACK_BIT 0 + +#define MPU6050_INTCFG_INT_LEVEL_BIT 7 +#define MPU6050_INTCFG_INT_OPEN_BIT 6 +#define MPU6050_INTCFG_LATCH_INT_EN_BIT 5 +#define MPU6050_INTCFG_INT_RD_CLEAR_BIT 4 +#define MPU6050_INTCFG_FSYNC_INT_LEVEL_BIT 3 +#define MPU6050_INTCFG_FSYNC_INT_EN_BIT 2 +#define MPU6050_INTCFG_I2C_BYPASS_EN_BIT 1 +#define MPU6050_INTCFG_CLKOUT_EN_BIT 0 + +#define MPU6050_INTMODE_ACTIVEHIGH 0x00 +#define MPU6050_INTMODE_ACTIVELOW 0x01 + +#define MPU6050_INTDRV_PUSHPULL 0x00 +#define MPU6050_INTDRV_OPENDRAIN 0x01 + +#define MPU6050_INTLATCH_50USPULSE 0x00 +#define MPU6050_INTLATCH_WAITCLEAR 0x01 + +#define MPU6050_INTCLEAR_STATUSREAD 0x00 +#define MPU6050_INTCLEAR_ANYREAD 0x01 + +#define MPU6050_INTERRUPT_FF_BIT 7 +#define MPU6050_INTERRUPT_MOT_BIT 6 +#define MPU6050_INTERRUPT_ZMOT_BIT 5 +#define MPU6050_INTERRUPT_FIFO_OFLOW_BIT 4 +#define MPU6050_INTERRUPT_I2C_MST_INT_BIT 3 +#define MPU6050_INTERRUPT_PLL_RDY_INT_BIT 2 +#define MPU6050_INTERRUPT_DMP_INT_BIT 1 +#define MPU6050_INTERRUPT_DATA_RDY_BIT 0 + +// TODO: figure out what these actually do +// UMPL source code is not very obivous +#define MPU6050_DMPINT_5_BIT 5 +#define MPU6050_DMPINT_4_BIT 4 +#define MPU6050_DMPINT_3_BIT 3 +#define MPU6050_DMPINT_2_BIT 2 +#define MPU6050_DMPINT_1_BIT 1 +#define MPU6050_DMPINT_0_BIT 0 + +#define MPU6050_MOTION_MOT_XNEG_BIT 7 +#define MPU6050_MOTION_MOT_XPOS_BIT 6 +#define MPU6050_MOTION_MOT_YNEG_BIT 5 +#define MPU6050_MOTION_MOT_YPOS_BIT 4 +#define MPU6050_MOTION_MOT_ZNEG_BIT 3 +#define MPU6050_MOTION_MOT_ZPOS_BIT 2 +#define MPU6050_MOTION_MOT_ZRMOT_BIT 0 + +#define MPU6050_DELAYCTRL_DELAY_ES_SHADOW_BIT 7 +#define MPU6050_DELAYCTRL_I2C_SLV4_DLY_EN_BIT 4 +#define MPU6050_DELAYCTRL_I2C_SLV3_DLY_EN_BIT 3 +#define MPU6050_DELAYCTRL_I2C_SLV2_DLY_EN_BIT 2 +#define MPU6050_DELAYCTRL_I2C_SLV1_DLY_EN_BIT 1 +#define MPU6050_DELAYCTRL_I2C_SLV0_DLY_EN_BIT 0 + +#define MPU6050_PATHRESET_GYRO_RESET_BIT 2 +#define MPU6050_PATHRESET_ACCEL_RESET_BIT 1 +#define MPU6050_PATHRESET_TEMP_RESET_BIT 0 + +#define MPU6050_DETECT_ACCEL_ON_DELAY_BIT 5 +#define MPU6050_DETECT_ACCEL_ON_DELAY_LENGTH 2 +#define MPU6050_DETECT_FF_COUNT_BIT 3 +#define MPU6050_DETECT_FF_COUNT_LENGTH 2 +#define MPU6050_DETECT_MOT_COUNT_BIT 1 +#define MPU6050_DETECT_MOT_COUNT_LENGTH 2 + +#define MPU6050_DETECT_DECREMENT_RESET 0x0 +#define MPU6050_DETECT_DECREMENT_1 0x1 +#define MPU6050_DETECT_DECREMENT_2 0x2 +#define MPU6050_DETECT_DECREMENT_4 0x3 + +#define MPU6050_USERCTRL_DMP_EN_BIT 7 +#define MPU6050_USERCTRL_FIFO_EN_BIT 6 +#define MPU6050_USERCTRL_I2C_MST_EN_BIT 5 +#define MPU6050_USERCTRL_I2C_IF_DIS_BIT 4 +#define MPU6050_USERCTRL_DMP_RESET_BIT 3 +#define MPU6050_USERCTRL_FIFO_RESET_BIT 2 +#define MPU6050_USERCTRL_I2C_MST_RESET_BIT 1 +#define MPU6050_USERCTRL_SIG_COND_RESET_BIT 0 + +#define MPU6050_PWR1_DEVICE_RESET_BIT 7 +#define MPU6050_PWR1_SLEEP_BIT 6 +#define MPU6050_PWR1_CYCLE_BIT 5 +#define MPU6050_PWR1_TEMP_DIS_BIT 3 +#define MPU6050_PWR1_CLKSEL_BIT 2 +#define MPU6050_PWR1_CLKSEL_LENGTH 3 + +#define MPU6050_CLOCK_INTERNAL 0x00 +#define MPU6050_CLOCK_PLL_XGYRO 0x01 +#define MPU6050_CLOCK_PLL_YGYRO 0x02 +#define MPU6050_CLOCK_PLL_ZGYRO 0x03 +#define MPU6050_CLOCK_PLL_EXT32K 0x04 +#define MPU6050_CLOCK_PLL_EXT19M 0x05 +#define MPU6050_CLOCK_KEEP_RESET 0x07 + +#define MPU6050_PWR2_LP_WAKE_CTRL_BIT 7 +#define MPU6050_PWR2_LP_WAKE_CTRL_LENGTH 2 +#define MPU6050_PWR2_STBY_XA_BIT 5 +#define MPU6050_PWR2_STBY_YA_BIT 4 +#define MPU6050_PWR2_STBY_ZA_BIT 3 +#define MPU6050_PWR2_STBY_XG_BIT 2 +#define MPU6050_PWR2_STBY_YG_BIT 1 +#define MPU6050_PWR2_STBY_ZG_BIT 0 + +#define MPU6050_WAKE_FREQ_1P25 0x0 +#define MPU6050_WAKE_FREQ_2P5 0x1 +#define MPU6050_WAKE_FREQ_5 0x2 +#define MPU6050_WAKE_FREQ_10 0x3 + +#define MPU6050_BANKSEL_PRFTCH_EN_BIT 6 +#define MPU6050_BANKSEL_CFG_USER_BANK_BIT 5 +#define MPU6050_BANKSEL_MEM_SEL_BIT 4 +#define MPU6050_BANKSEL_MEM_SEL_LENGTH 5 + +#define MPU6050_WHO_AM_I_BIT 6 +#define MPU6050_WHO_AM_I_LENGTH 6 + +#define MPU6050_DMP_MEMORY_BANKS 8 +#define MPU6050_DMP_MEMORY_BANK_SIZE 256 +#define MPU6050_DMP_MEMORY_CHUNK_SIZE 16 + + +class MPU6050 +{ +public: + MPU6050(uint8_t address=MPU6050_DEFAULT_ADDRESS); + + void initialize(); + bool testConnection(); + + // SMPLRT_DIV register + void setRate(uint8_t rate); + + // CONFIG register + void setExternalFrameSync(uint8_t sync); + void setDLPFMode(uint8_t bandwidth); + + // GYRO_CONFIG register + void setFullScaleGyroRange(uint8_t range); + + // ACCEL_CONFIG register + void setFullScaleAccelRange(uint8_t range); + void setDHPFMode(uint8_t mode); + + // ACCEL_*OUT_* registers + void getMotion6(int16_t* ax, int16_t* ay, int16_t* az, int16_t* gx, int16_t* gy, int16_t* gz); + + // PWR_MGMT_1 register + void reset(); + + // WHO_AM_I register + uint8_t getDeviceID(); + +private: + uint8_t devAddr; + uint8_t buffer[14]; +}; + +#endif /* _MPU6050_H_ */ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/imu.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/imu.h new file mode 100644 index 0000000..2a2d355 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/IMU/imu.h @@ -0,0 +1,11 @@ +#ifndef PIBOT_IMU_H_ +#define PIBOT_IMU_H_ + +class IMU +{ +public: + virtual bool init() = 0; + virtual void get_data(float* imu_data) = 0; +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Joystick/joystick.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Joystick/joystick.cpp new file mode 100644 index 0000000..ec82306 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Joystick/joystick.cpp @@ -0,0 +1,268 @@ +#include "joystick.h" + +#include "board.h" +#include "print.h" + +#define pressures false +#define rumble false + +Joystick::Joystick() +{ +} + +bool Joystick::init() +{ + pb_printf("init joystick"); + //PS2_SetInit(); +#if 0 + unsigned long start = Board::get()->get_tick_count(); + while(Board::get()->get_tick_count()-start>500){ + ; + } + error = ps2x.config_gamepad(PS2_CLK, PS2_CMD, PS2_SEL, PS2_DAT, pressures, rumble); + if (error == 0) + { + pb_printf("Teleop start"); + return true; + } + + if (error == 1) + pb_printf("No controller found, check wiring, see readme.txt to enable debug. visit www.billporter.info for troubleshooting tips"); + else if (error == 2) + pb_printf("Controller found but not accepting commands. see readme.txt to enable debug. Visit www.billporter.info for troubleshooting tips"); + else if (error == 3) + pb_printf("Controller refusing to enter Pressures mode, may not support it. "); + else + pb_printf("Teleop err"); +#endif + return false; +} + +#define JOYSTICK_TEST +void Joystick::test() +{ +#ifdef JOYSTICK_TEST + + unsigned char key=PS2_DataKey(); + + //有按键按下 + if(key!=0) { + switch (key) { + case PSB_SELECT: + pb_printf("SELECT"); + break; + case PSB_L3: + pb_printf("L3"); + break; + case PSB_R3: + pb_printf("R3"); + break; + case PSB_START: + pb_printf("START"); + break; + case PSB_PAD_UP: + pb_printf("UP"); + break; + case PSB_PAD_RIGHT: + pb_printf("RIGHT"); + break; + case PSB_PAD_DOWN: + pb_printf("DOWN"); + break; + case PSB_PAD_LEFT: + pb_printf("LEFT"); + break; + case PSB_L2: + pb_printf("L2"); + break; + case PSB_R2: + pb_printf("R2"); + break; + case PSB_L1: + pb_printf("L1"); + break; + case PSB_R1: + pb_printf("R1"); + break; + case PSB_TRIANGLE: + pb_printf("TRIANGLE"); + break; + case PSB_CIRCLE: + pb_printf("CIRCLE"); + break; + case PSB_CROSS: + pb_printf("CROSS"); + break; + case PSB_SQUARE: + pb_printf("SQUARE"); + break; + default: + pb_printf("UNKNOWN"); + break; + } + } + + pb_printf("(need to switch mode) %5d %5d %5d %5d",PS2_AnologData(PSS_LX),PS2_AnologData(PSS_LY), PS2_AnologData(PSS_RX),PS2_AnologData(PSS_RY) ); +#endif +} + +bool Joystick::check(short& liner_x, short liner_y, short& angular_z){ + #if JOYSTICK_FOR_HOLONOMIC + return holonomic_check(liner_x, liner_y, angular_z); + #else + return nonholonomic_check(liner_x, liner_y, angular_z); + #endif +} + +bool Joystick::holonomic_check(short& liner_x, short liner_y, short& angular_z){ + bool rtn = false; + + unsigned char key=PS2_DataKey(); + + liner_y = liner_y; + //up down left right for liner x, y + if (key == PSB_PAD_UP) { + #if JOYSTICK_DEBUG_ENABLE + pb_printf("UP"); + #endif + liner_x = MAX_LINER_X; + rtn = true; + } + + if(key == PSB_PAD_DOWN) { + #if JOYSTICK_DEBUG_ENABLE + pb_printf("DOWN"); + #endif + liner_x = -MAX_LINER_X; + rtn = true; + } + + if(key == PSB_PAD_RIGHT) { + #if JOYSTICK_DEBUG_ENABLE + pb_printf("RIGHT"); + #endif + liner_y = MAX_LINER_Y; + rtn = true; + } + + if(key == PSB_PAD_LEFT) { + #if JOYSTICK_DEBUG_ENABLE + pb_printf("LEFT"); + #endif + liner_y = -MAX_LINER_Y; + rtn = true; + } + + //triangle square circle cross for angular z + if (key == PSB_SQUARE) { + #if JOYSTICK_DEBUG_ENABLE + pb_printf("SQUARE"); + #endif + angular_z = MAX_ANGULAR_Z; + rtn = true; + } + + if(key == PSB_CIRCLE) { + #if JOYSTICK_DEBUG_ENABLE + pb_printf("CIRCLE"); + #endif + angular_z = -MAX_ANGULAR_Z; + rtn = true; + } + + if (key == PSB_L1) { //print stick values if either is TRUE + #if JOYSTICK_DEBUG_ENABLE + pb_printf("Stick Values:"); + pb_printf("%d", PS2_AnologData(PSS_LY)); + pb_printf(","); + pb_printf("%d", PS2_AnologData(PSS_LX)); + pb_printf(","); + pb_printf("%d", PS2_AnologData(PSS_RY)); + pb_printf(","); + pb_printf("%d", PS2_AnologData(PSS_RX)); + #endif + + if (PS2_AnologData(PSS_LX) == 255 && PS2_AnologData(PSS_LX) == 255 && + PS2_AnologData(PSS_LX) == 255 && PS2_AnologData(PSS_LX) == 255) { + #if JOYSTICK_DEBUG_ENABLE + pb_printf("switch mode for use rocker"); + #endif + } else { + liner_x = ((255.0/2)-PS2_AnologData(PSS_LY))/(255.0/2)*MAX_LINER_X; + liner_y = ((255.0/2)-PS2_AnologData(PSS_LX))/(255.0/2)*MAX_LINER_Y; + angular_z = ((255.0/2)-PS2_AnologData(PSS_RX))/(255.0/2)*MAX_ANGULAR_Z; + rtn = true; + } + } + + return rtn; +} + +bool Joystick::nonholonomic_check(short& liner_x, short liner_y, short& angular_z){ + + liner_y = 0; + + bool rtn = false; + + unsigned char key=PS2_DataKey(); + + liner_y = liner_y; + //will be TRUE if button was JUST pressed + if (key == PSB_PAD_UP) { + #if JOYSTICK_DEBUG_ENABLE + pb_printf("Up held this hard: "); + #endif + liner_x = MAX_LINER_X; + rtn = true; + } + + if(key == PSB_PAD_RIGHT) { + #if JOYSTICK_DEBUG_ENABLE + pb_printf("Right held this hard: "); + #endif + angular_z = MAX_ANGULAR_Z; + rtn = true; + } + + if(key == PSB_PAD_LEFT) { + #if JOYSTICK_DEBUG_ENABLE + pb_printf("LEFT held this hard: "); + #endif + angular_z = -MAX_ANGULAR_Z; + rtn = true; + } + + if(key == PSB_PAD_DOWN) { + #if JOYSTICK_DEBUG_ENABLE + pb_printf("DOWN held this hard: "); + #endif + liner_x = -MAX_LINER_X; + rtn = true; + } + + if (key == PSB_L1) { //print stick values if either is TRUE + #if JOYSTICK_DEBUG_ENABLE + pb_printf("Stick Values:"); + pb_printf("%d", PS2_AnologData(PSS_LY)); + pb_printf(","); + pb_printf("%d", PS2_AnologData(PSS_LX)); + pb_printf(","); + pb_printf("%d", PS2_AnologData(PSS_RY)); + pb_printf(","); + pb_printf("%d", PS2_AnologData(PSS_RX)); + #endif + + if (PS2_AnologData(PSS_LX) == 255 && PS2_AnologData(PSS_LX) == 255 && + PS2_AnologData(PSS_LX) == 255 && PS2_AnologData(PSS_LX) == 255) { + #if JOYSTICK_DEBUG_ENABLE + pb_printf("switch mode for use rocker"); + #endif + } else { + liner_x = ((255.0/2)-PS2_AnologData(PSS_LY))/(255.0/2)*MAX_LINER_X; + angular_z = ((255.0/2)-PS2_AnologData(PSS_LX))/(255.0/2)*MAX_ANGULAR_Z; + rtn = true; + } + } + + return rtn; +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Joystick/joystick.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Joystick/joystick.h new file mode 100644 index 0000000..573607c --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Joystick/joystick.h @@ -0,0 +1,21 @@ +#ifndef PIBOT_JOYSTICK_H_ +#define PIBOT_JOYSTICK_H_ + +#include "pstwo.h" //for v1.6 + +class Joystick +{ +public: + Joystick(); + bool init(); + + void test(); + bool check(short& liner_x, short liner_y, short& angular_z); +private: + bool holonomic_check(short& liner_x, short liner_y, short& angular_z); + bool nonholonomic_check(short& liner_x, short liner_y, short& angular_z); +private: + int error; +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/KinematicModels/differential.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/KinematicModels/differential.h new file mode 100644 index 0000000..466b911 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/KinematicModels/differential.h @@ -0,0 +1,50 @@ +#ifndef PIBOT_DIFFERENTIAL_H_ +#define PIBOT_DIFFERENTIAL_H_ + +// 2轮差分模型 +#include "model.h" +#include "math.h" + +//定义Motor数目 +#define MOTOR_COUNT 2 + +// 2轮差分模型接口实现 +class Differential : public Model +{ +public: + Differential() {} + Differential(float _wheel_radius, float _body_radius) : Model(_wheel_radius, _body_radius) {} + + // 运动解算 把给到机器人的速度分解为各个轮子速度 + virtual void motion_solver(float* robot_speed, float* motor_speed) { + // robot_speed[0] x robot_speed[1] y robot_speed[2] z + motor_speed[0] = (-robot_speed[0] + robot_speed[2] * body_radius) / wheel_radius; + motor_speed[1] = ( robot_speed[0] + robot_speed[2] * body_radius) / wheel_radius; + } + + // 反解算,把各个轮子的速度转为机器人的速度,这里通过固定时间间隔转为里程 + virtual void get_odom(struct Odom* odom, float* motor_dis, unsigned long interval) { + + float dxy_ave = (-motor_dis[0] + motor_dis[1]) / 2.0; + float dth = (motor_dis[0] + motor_dis[1]) / (2* body_radius); + float vxy = 1000 * dxy_ave / interval; + float vth = 1000 * dth / interval; + + odom->vel_x = vxy; + odom->vel_y = 0; + odom->vel_z = vth; + + float dx = 0, dy = 0; + if (motor_dis[0] != motor_dis[1]) { + dx = cos(dth) * dxy_ave; + dy = -sin(dth) * dxy_ave; + odom->x += (cos(odom->z) * dx - sin(odom->z) * dy); + odom->y += (sin(odom->z) * dx + cos(odom->z) * dy);; + } + + if (motor_dis[0] + motor_dis[1] != 0) + odom->z += dth; + } +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/KinematicModels/model.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/KinematicModels/model.h new file mode 100644 index 0000000..f63eec2 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/KinematicModels/model.h @@ -0,0 +1,44 @@ +#ifndef _GEBOT_MODLE_H_ +#define _GEBOT_MODLE_H_ + +//用于标识里程信息 +struct Odom { + float x; + float y; + float z; + float vel_x; + float vel_y; + float vel_z; +}; + +// 运动模型接口， 继承该类实现对应的模型 +struct Model +{ + // 构造函数 + Model(){} + Model(float _wheel_radius, float _body_radius): wheel_radius(_wheel_radius), + body_radius(_body_radius){ + } + + // 参数更新接口 + void set(float _wheel_radius, float _body_radius) { + wheel_radius = _wheel_radius; + body_radius = _body_radius; + } + + // 析构函数 + ~Model(){} + + // robot speed ------------> motor speed 运动解算 把给到机器人的速度分解为各个轮子速度 + virtual void motion_solver(float* robot_speed, float* motor_speed) = 0; + + // motor speed-------------> robot speed 反解算， 把各个轮子的速度转为机器人的速度 ，这里通过固定时间间隔转为里程 + // interval ms + virtual void get_odom(struct Odom* odom, float* motor_dis, unsigned long interval) = 0; + +protected: + float wheel_radius; // 轮子半径 + float body_radius; // 机器人半径（泛指） +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/KinematicModels/omni3.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/KinematicModels/omni3.h new file mode 100644 index 0000000..0b00a37 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/KinematicModels/omni3.h @@ -0,0 +1,50 @@ +#ifndef PIBOT_OMNI3_H_ +#define PIBOT_OMNI3_H_ + +#include "model.h" +#include "math.h" + +#define MOTOR_COUNT 3 // 定义Motor数目 +#define sqrt_of_3 1.732f // 定义3的平方根降低计算量 + +// 3轮全向模型接口实现 +class Omni3 : public Model +{ +public: + Omni3() {} + Omni3(float _wheel_radius, float _body_radius) : Model(_wheel_radius, _body_radius) {} + + //运动解算 把给到机器人的速度分解为各个轮子速度 + void motion_solver(float* robot_speed, float* motor_speed) { + // robot_speed[0] x robot_speed[1] y robot_speed[2] z + motor_speed[0] = (robot_speed[1] + robot_speed[2] * body_radius)/ wheel_radius; + motor_speed[1] = (-robot_speed[0]*sqrt_of_3*0.5 - robot_speed[1]*0.5 + robot_speed[2] * body_radius) / wheel_radius; + motor_speed[2] = (robot_speed[0]*sqrt_of_3*0.5 - robot_speed[1]*0.5 + robot_speed[2] * body_radius) / wheel_radius; + } + + //反解算， 把各个轮子的速度转为机器人的速度 ，这里通过固定时间间隔转为里程 + void get_odom(struct Odom* odom, float* motor_dis, unsigned long interval) { + if (motor_dis[0]!=0 || motor_dis[1]!=0 || motor_dis[2]!=0){ + //speed + float dvx = (-motor_dis[1]+motor_dis[2])*sqrt_of_3/3.0f; + float dvy = (motor_dis[0]*2-motor_dis[1]-motor_dis[2])/3.0f; + float dvth = (motor_dis[0]+motor_dis[1]+motor_dis[2])/ (3 * body_radius); + odom->vel_x = dvx / interval; + odom->vel_y = dvy / interval; + odom->vel_z = dvth / interval; + + float th = odom->z; + + //odometry + float dx = (-sin(th)*motor_dis[0]*2+(-sqrt_of_3*cos(th)+sin(th))*motor_dis[1]+(sqrt_of_3*cos(th)+sin(th))*motor_dis[2])/3.0f; + float dy = (cos(th)*motor_dis[0]*2+(-sqrt_of_3*sin(th)-cos(th))*motor_dis[1]+(sqrt_of_3*sin(th)-cos(th))*motor_dis[2])/3.0f; + float dth = (motor_dis[0]+motor_dis[1]+motor_dis[2])/ (3 * body_radius); + + odom->x += dx; + odom->y += dy; + odom->z += dth; + } + } +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Motor/common_motor_controller.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Motor/common_motor_controller.cpp new file mode 100644 index 0000000..ee9a214 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Motor/common_motor_controller.cpp @@ -0,0 +1,27 @@ +#include "common_motor_controller.h" +#include "board.h" +#include "data_holder.h" + +CommonMotorController::CommonMotorController(int _num, unsigned short _pwm_max, bool _reverse): + num(_num), pwm_max(_pwm_max), reverse(_reverse) +{ +} + +void CommonMotorController::init() +{ + Board::get()->motor_init(num, pwm_max); + last_pwm = 0; +} + +void CommonMotorController::control(short pwm) +{ + if (last_pwm == pwm) + return; + + last_pwm = pwm; + + if (!reverse) + Board::get()->motor_pwm(num, pwm); + else + Board::get()->motor_pwm(num, 0-pwm); +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Motor/common_motor_controller.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Motor/common_motor_controller.h new file mode 100644 index 0000000..d06f2bf --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Motor/common_motor_controller.h @@ -0,0 +1,21 @@ +#ifndef PIBOT_COMMON_MOTOR_CONTROLLER_H_ +#define PIBOT_COMMON_MOTOR_CONTROLLER_H_ + +#include "motor_controller.h" + +class CommonMotorController:public MotorController +{ +public: + CommonMotorController(int _num, unsigned short _pwm_max, bool _reverse=false); + ~CommonMotorController(){} + virtual void init(); + virtual void control(short pwm); + +private: + int num; + unsigned short pwm_max; + short last_pwm; + bool reverse; +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Motor/motor_controller.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Motor/motor_controller.h new file mode 100644 index 0000000..9de5cd4 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Motor/motor_controller.h @@ -0,0 +1,17 @@ +#ifndef PIBOT_MOTOR_CONTROLLER_H_ +#define PIBOT_MOTOR_CONTROLLER_H_ + +// 电机控制器接口 +class MotorController +{ +public: + //初始化 + virtual void init()=0; + + /*控制电机 + param: pwm 标识电机速度 >0 正转 <0 反转 =0 停止 + */ + virtual void control(short pwm)=0; +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PID/README.txt b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PID/README.txt new file mode 100644 index 0000000..9b9cb83 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PID/README.txt @@ -0,0 +1,11 @@ +*************************************************************** +* Arduino PID Library - Version 1.2.0 +* by Brett Beauregard brettbeauregard.com +* +* This Library is licensed under the MIT License +*************************************************************** + + - For an ultra-detailed explanation of why the code is the way it is, please visit: + http://brettbeauregard.com/blog/2011/04/improving-the-beginners-pid-introduction/ + + - For function documentation see: http://playground.arduino.cc/Code/PIDLibrary diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PID/pid.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PID/pid.cpp new file mode 100644 index 0000000..fac9bb7 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PID/pid.cpp @@ -0,0 +1,65 @@ +#include "pid.h" + +#include "board.h" +#include "print.h" + +PID::PID(float* _input, float* _feedback, float _kp, float _ki, float _kd, unsigned short _max_output) + :kp(_kp), ki(_ki), kd(_kd), max_output(_max_output*1.0), input(_input), feedback(_feedback) +{ + clear(); +} + +void PID::clear() +{ + error = integra = derivative = previous_error =0; +} + +void PID::update(float _kp, float _ki, float _kd, unsigned short _max_output) +{ + kp = _kp; + ki = _ki; + kd = _kd; + max_output = _max_output; +} + +short PID::compute(float interval) +{ + error = *input - *feedback; + + integra = integra + error*interval; + derivative = (error - previous_error) / interval; + + previous_error = error; + + + if (ki != 0) { + #if PID_DEBUG_OUTPUT + pb_printf("integra=%ld max_output=%ld %ld", long(integra*1000), long(-(max_output/ki*1000)), long(max_output/ki*1000)); + #endif + if (integra < -(max_output/ki)) { + #if PID_DEBUG_OUTPUT + pb_printf("integra clear-"); + #endif + integra = -(max_output/ki); + } + if (integra > max_output/ki) { + #if PID_DEBUG_OUTPUT + pb_printf("integra clear+"); + #endif + integra = max_output/ki; + } + } + + float val = error*kp + integra*ki + derivative*kd; + + if (val < -max_output) + val = -max_output+1; + else if (val > max_output) + val = max_output-1; + +#if PID_DEBUG_OUTPUT + pb_printf("error=%ld integra=%ld derivative=%ld val=%ld", long(error*1000), long(integra*1000), long(derivative*1000), long(val*1000)); +#endif + + return val; +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PID/pid.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PID/pid.h new file mode 100644 index 0000000..c6f0c41 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PID/pid.h @@ -0,0 +1,39 @@ +#ifndef PIBOT_PID_H_ +#define PIBOT_PID_H_ + +//pid接口 +class PID +{ +public: + /* pid构造函数 + * @param input pid输入的地址 + * @param output pid输出的地址 + * @param kp， ki， kd pid参数 + * @param max_output 输出结构的限制值 + */ + PID(float* input, float* feedback, float kp, float ki, float kd, unsigned short max_output); + + // pid计算 + short compute(float interval); + + // 重置pid的值 + void clear(); + + //更新pid参数 + void update(float kp, float ki, float kd, unsigned short max_output); +private: + float kp; + float ki; + float kd; + float max_output; + float* input; + float* feedback; + + float error; //比例值 + float integra;//积分值 + float derivative;//微分值 + + float previous_error; //上一次的输入反馈差值 +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PS2/pstwo.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PS2/pstwo.cpp new file mode 100644 index 0000000..f47f809 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PS2/pstwo.cpp @@ -0,0 +1,287 @@ +#include "pstwo.h" + +#include "bsplib.h" +/********************************************************* +Copyright (C), 2015-2025, YFRobot. +www.yfrobot.com +File：PS2驱动程序 +Author：pinggai Version:1.1 Data:2015/10/20 +Description: PS2驱动程序 + 增加功能： + 1、软件设置“红灯模式”、“绿灯模式”，并可以设置“保存”，通过手柄“模式按键”无法改变 + 2、设置手柄震动：通过数值的设置，改变左侧大震动电机震动频率。 + 通过数值的设置，开关右侧小震动电机。 +History: +V1.0: 2015/05/16 +1、手柄解码，识别按键值，读取模拟值。 +**********************************************************/ +#define DELAY_TIME delay_us(3); +unsigned short Handkey; // 按键值读取，零时存储。 +unsigned char Comd[2]={0x01,0x42}; //开始命令。请求数据 +unsigned char Data[9]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}; //数据存储数组 +unsigned short MASK[]={ + PSB_SELECT, + PSB_L3, + PSB_R3 , + PSB_START, + PSB_PAD_UP, + PSB_PAD_RIGHT, + PSB_PAD_DOWN, + PSB_PAD_LEFT, + PSB_L2, + PSB_R2, + PSB_L1, + PSB_R1 , + PSB_GREEN, + PSB_RED, + PSB_BLUE, + PSB_PINK + }; //按键值与按键明 + +//手柄接口初始化 输入 DI->PB12 +// 输出 DO->PB13 CS->PB14 CLK->PB15 +void PS2_Init(void) +{ + //输入 DI->PB12 + RCC->APB2ENR|=1<<3; //使能PORTB时钟 + GPIOB->CRH&=0XFFF0FFFF;//PB12设置成输入 默认下拉 + GPIOB->CRH|=0X00080000; + + // DO->PB13 CS->PB14 CLK->PB15 + RCC->APB2ENR|=1<<3; //使能PORTB时钟 + GPIOB->CRH&=0X000FFFFF; + GPIOB->CRH|=0X33300000;//PB13、PB14、PB15 推挽输出 +} + +//向手柄发送命令 +void PS2_Cmd(unsigned char CMD) +{ + volatile unsigned short ref=0x01; + Data[1] = 0; + for(ref=0x01; ref<0x0100; ref<<=1) { + if(ref&CMD) { + DO_H; //输出一位控制位 + } else { + DO_L; + } + + CLK_H; //时钟拉高 + DELAY_TIME; + CLK_L; + DELAY_TIME; + CLK_H; + + if(DI) + Data[1] = ref|Data[1]; + } + + delay_us(16); +} + +//判断是否为红灯模式,0x41=模拟绿灯，0x73=模拟红灯 +//返回值；0，红灯模式 +// 其他，其他模式 +unsigned char PS2_RedLight(void) +{ + CS_L; + PS2_Cmd(Comd[0]); //开始命令 + PS2_Cmd(Comd[1]); //请求数据 + CS_H; + if( Data[1] == 0X73) + return 0 ; + + return 1; +} + +//读取手柄数据 +void PS2_ReadData(void) +{ + volatile unsigned char byte=0; + volatile unsigned short ref=0x01; + CS_L; + PS2_Cmd(Comd[0]); //开始命令 + PS2_Cmd(Comd[1]); //请求数据 + + //开始接受数据 + for(byte=2;byte<9;byte++) { + for(ref=0x01;ref<0x100;ref<<=1) { + CLK_H; + DELAY_TIME; + CLK_L; + DELAY_TIME; + CLK_H; + + if(DI) + Data[byte] = ref|Data[byte]; + } + delay_us(16); + } + CS_H; +} + +//对读出来的PS2的数据进行处理,只处理按键部分 +//只有一个按键按下时按下为0， 未按下为1 +unsigned char PS2_DataKey() +{ + unsigned char index; + + PS2_ClearData(); + PS2_ReadData(); + + Handkey=(Data[4]<<8)|Data[3]; //这是16个按键 按下为0， 未按下为1 + for(index=0;index<16;index++) { + if((Handkey&(1<<(MASK[index]-1)))==0) + return index+1; + } + + return 0; //没有任何按键按下 +} + +//得到一个摇杆的模拟量 范围0~256 +unsigned char PS2_AnologData(unsigned char button) +{ + return Data[button]; +} + +//清除数据缓冲区 +void PS2_ClearData() +{ + unsigned char a; + for(a=0;a<9;a++) + Data[a]=0x00; +} +/****************************************************** +Function: void PS2_Vibration(unsigned char motor1, unsigned char motor2) +Description: 手柄震动函数， +Calls: void PS2_Cmd(unsigned char CMD); +Input: motor1:右侧小震动电机 0x00关，其他开 + motor2:左侧大震动电机 0x40~0xFF 电机开，值越大 震动越大 +******************************************************/ +void PS2_Vibration(unsigned char motor1, unsigned char motor2) +{ + CS_L; + delay_us(16); + PS2_Cmd(0x01); //开始命令 + PS2_Cmd(0x42); //请求数据 + PS2_Cmd(0X00); + PS2_Cmd(motor1); + PS2_Cmd(motor2); + PS2_Cmd(0X00); + PS2_Cmd(0X00); + PS2_Cmd(0X00); + PS2_Cmd(0X00); + CS_H; + delay_us(16); +} + +//short poll +void PS2_ShortPoll(void) +{ + CS_L; + delay_us(16); + PS2_Cmd(0x01); + PS2_Cmd(0x42); + PS2_Cmd(0X00); + PS2_Cmd(0x00); + PS2_Cmd(0x00); + CS_H; + delay_us(16); +} + +//进入配置 +void PS2_EnterConfing(void) +{ + CS_L; + delay_us(16); + PS2_Cmd(0x01); + PS2_Cmd(0x43); + PS2_Cmd(0X00); + PS2_Cmd(0x01); + PS2_Cmd(0x00); + PS2_Cmd(0X00); + PS2_Cmd(0X00); + PS2_Cmd(0X00); + PS2_Cmd(0X00); + CS_H; + delay_us(16); +} + +//发送模式设置 +void PS2_TurnOnAnalogMode(void) +{ + CS_L; + PS2_Cmd(0x01); + PS2_Cmd(0x44); + PS2_Cmd(0X00); + PS2_Cmd(0x01); //analog=0x01;digital=0x00 软件设置发送模式 + PS2_Cmd(0xEE); //Ox03锁存设置，即不可通过按键“MODE”设置模式。 + //0xEE不锁存软件设置，可通过按键“MODE”设置模式。 + PS2_Cmd(0X00); + PS2_Cmd(0X00); + PS2_Cmd(0X00); + PS2_Cmd(0X00); + CS_H; + delay_us(16); +} + +//振动设置 +void PS2_VibrationMode(void) +{ + CS_L; + delay_us(16); + PS2_Cmd(0x01); + PS2_Cmd(0x4D); + PS2_Cmd(0X00); + PS2_Cmd(0x00); + PS2_Cmd(0X01); + CS_H; + delay_us(16); +} + +//完成并保存配置 +void PS2_ExitConfing(void) +{ + CS_L; + delay_us(16); + PS2_Cmd(0x01); + PS2_Cmd(0x43); + PS2_Cmd(0X00); + PS2_Cmd(0x00); + PS2_Cmd(0x5A); + PS2_Cmd(0x5A); + PS2_Cmd(0x5A); + PS2_Cmd(0x5A); + PS2_Cmd(0x5A); + CS_H; + delay_us(16); +} + +//手柄配置初始化 +void PS2_SetInit(void) +{ + PS2_ShortPoll(); + PS2_ShortPoll(); + PS2_ShortPoll(); + PS2_EnterConfing(); //进入配置模式 + PS2_TurnOnAnalogMode(); //“红绿灯”配置模式，并选择是否保存 + PS2_VibrationMode(); //开启震动模式 + PS2_ExitConfing(); //完成并保存配置 +} + + + + + + + + + + + + + + + + + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PS2/pstwo.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PS2/pstwo.h new file mode 100644 index 0000000..1fbe9ec --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/PS2/pstwo.h @@ -0,0 +1,109 @@ +#ifndef __PSTWO_H +#define __PSTWO_H + +#include "board.h" +/********************************************************* +Copyright (C), 2015-2025, YFRobot. +www.yfrobot.com +File：PS2驱动程序 +Author：pinggai Version:1.1 Data:2015/10/20 +Description: PS2驱动程序 + 增加功能： + 1、软件设置“红灯模式”、“绿灯模式”，并可以设置“保存”，通过手柄“模式按键”无法改变 + 2、设置手柄震动：通过数值的设置，改变左侧大震动电机震动频率。 + 通过数值的设置，开关右侧小震动电机。 +History: +V1.0: 2015/05/16 +1、手柄解码，识别按键值，读取模拟值。 +**********************************************************/ +#if 0 +#define DI (Board::get()->getDIState(_JS_DAT)) //PB12 输入 + +#define DO_H (Board::get()->setDOState(_JS_CMD, 0)) //命令位高 +#define DO_L (Board::get()->setDOState(_JS_CMD, 1)) //命令位低 + +#define CS_H (Board::get()->setDOState(_JS_CS, 0)) //CS拉高 +#define CS_L (Board::get()->setDOState(_JS_CS, 1)) //CS拉低 + +#define CLK_H (Board::get()->setDOState(_JS_CLK, 0)) //时钟拉高 +#define CLK_L (Board::get()->setDOState(_JS_CLK, 1)) //时钟拉低 +#else +#include + +#define BITBAND(addr, bitnum) ((addr & 0xF0000000)+0x2000000+((addr &0xFFFFF)<<5)+(bitnum<<2)) +#define MEM_ADDR(addr) *((volatile unsigned long *)(addr)) +#define BIT_ADDR(addr, bitnum) MEM_ADDR(BITBAND(addr, bitnum)) +#define GPIOA_ODR_Addr (GPIOA_BASE+12) //0x4001080C +#define GPIOA_IDR_Addr (GPIOA_BASE+8) //0x40010808 +#define PAout(n) BIT_ADDR(GPIOA_ODR_Addr,n) //输出 +#define PAin(n) BIT_ADDR(GPIOA_IDR_Addr,n) //输入 + + +#define DI PAin(4) //PB12 输入 + +#define DO_H PAout(5)=1 //命令位高 +#define DO_L PAout(5)=0 //命令位低 + +#define CS_H PAout(0)=1 //CS拉高 +#define CS_L PAout(0)=0 //CS拉低 + +#define CLK_H PAout(1)=1 //时钟拉高 +#define CLK_L PAout(1)=0 //时钟拉低 +#endif + +//These are our button constants +#define PSB_SELECT 1 +#define PSB_L3 2 +#define PSB_R3 3 +#define PSB_START 4 +#define PSB_PAD_UP 5 +#define PSB_PAD_RIGHT 6 +#define PSB_PAD_DOWN 7 +#define PSB_PAD_LEFT 8 +#define PSB_L2 9 +#define PSB_R2 10 +#define PSB_L1 11 +#define PSB_R1 12 +#define PSB_GREEN 13 +#define PSB_RED 14 +#define PSB_BLUE 15 +#define PSB_PINK 16 + +#define PSB_TRIANGLE 13 +#define PSB_CIRCLE 14 +#define PSB_CROSS 15 +#define PSB_SQUARE 16 + +//#define WHAMMY_BAR 8 + +//These are stick values +#define PSS_RX 5 //右摇杆X轴数据 +#define PSS_RY 6 +#define PSS_LX 7 +#define PSS_LY 8 + +extern unsigned char Data[9]; +extern unsigned short MASK[16]; +extern unsigned short Handkey; + +void PS2_Init(void); +unsigned char PS2_RedLight(void); //判断是否为红灯模式 +void PS2_ReadData(void); //读手柄数据 +void PS2_Cmd(unsigned char CMD); //向手柄发送命令 +unsigned char PS2_DataKey(void); //按键值读取 +unsigned char PS2_AnologData(unsigned char button); //得到一个摇杆的模拟量 +void PS2_ClearData(void); //清除数据缓冲区 +void PS2_Vibration(unsigned char motor1, unsigned char motor2);//振动设置motor1 0xFF开，其他关，motor2 0x40~0xFF + +void PS2_EnterConfing(void); //进入配置 +void PS2_TurnOnAnalogMode(void); //发送模拟量 +void PS2_VibrationMode(void); //振动设置 +void PS2_ExitConfing(void); //完成配置 +void PS2_SetInit(void); //配置初始化 + +#endif + + + + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/dataframe.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/dataframe.h new file mode 100644 index 0000000..93808c7 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/dataframe.h @@ -0,0 +1,49 @@ +#ifndef PIBOT_DATA_FRAME_H_ +#define PIBOT_DATA_FRAME_H_ + +// 协议接口类 + +//消息id定义 +enum MESSAGE_ID +{ + ID_GET_VERSION = 0, // 获取version信息 + ID_SET_ROBOT_PARAMTER = 1, // 设置机器人参数 + ID_GET_ROBOT_PARAMTER = 2, // 获取机器人参数 + ID_CLEAR_ODOM = 3, // 清除里程计 + ID_SET_VELOCITY = 4, // 下发速度值 + ID_GET_ODOM = 5, // 获取里程计值 + ID_GET_PID_DATA = 6, // 获取PID值的输入和反馈（用于PID参数调节) + ID_GET_IMU_DATA = 7, // 获取imu值 + ID_GET_ENCODER_COUNT = 8, + ID_SET_MOTOR_PWM = 9, + ID_MESSGAE_MAX +}; + +// 通知接口 +class Notify +{ +public: + virtual void update(const MESSAGE_ID id, void* data) = 0; +}; + +// 协议接口， 继承改接口实现一种协议 +class Dataframe +{ +public: + //初始化 + virtual bool init()=0; + + // 注册notify， 对需要关注的id添加关注 + virtual void register_notify(const MESSAGE_ID id, Notify* _nf)=0; + + // 数据接收接口 + virtual bool data_recv(unsigned char c)=0; + + // 解析协议 + virtual bool data_parse()=0; + + // 用于主动交互信息 预留 + virtual bool interact(const MESSAGE_ID id)=0; +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/queue.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/queue.h new file mode 100644 index 0000000..30b79f5 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/queue.h @@ -0,0 +1,21 @@ +#ifndef PIBOT_QUEUE_H_ +#define PIBOT_QUEUE_H_ + +// 一个ringbuffer的接口 +class Queue +{ +public: + // 生产数据 + virtual bool put(unsigned char ch)=0; + + // 消费数据 + virtual bool get(unsigned char& ch)=0; + + // 可用数据 + virtual unsigned short size()=0; + + // 占用大小 + virtual unsigned short max_size()=0; +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/simple_dataframe.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/simple_dataframe.h new file mode 100644 index 0000000..31e0295 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/simple_dataframe.h @@ -0,0 +1,55 @@ +#ifndef PIBOT_SIMPLE_DATAFRAME_H_ +#define PIBOT_SIMPLE_DATAFRAME_H_ + +#include "dataframe.h" +#include + +static const unsigned short MESSAGE_BUFFER_SIZE = 255; + +#define FIX_HEAD 0x5A + +struct Head +{ + unsigned char flag;// 头部标记,固定值:0X5A + unsigned char msg_id;// 消息ID,表示消息具体作用,决定消息体具体格式 + unsigned char length;// 消息体长度 +}; + + +struct Message +{ +struct Head head; +unsigned char data[MESSAGE_BUFFER_SIZE]; +unsigned char check; +unsigned char recv_count;//已经接收的字节数 + +Message(){} +Message(unsigned char msg_id, unsigned char* data=0,unsigned char len=0) { + head.flag = FIX_HEAD; + head.msg_id = msg_id; + head.length = recv_count = len; + check = 0; + + if (data != 0 && len !=0) + memcpy(this->data, data, len); + + unsigned char* _send_buffer = (unsigned char*)this; + + unsigned int i = 0; + for (i = 0; i < sizeof(head)+head.length; i++) + check += _send_buffer[i]; + + _send_buffer[sizeof(head)+head.length] = check; +} +}; + +enum RECEIVE_STATE +{ + STATE_RECV_FIX=0, + STATE_RECV_ID, + STATE_RECV_LEN, + STATE_RECV_DATA, + STATE_RECV_CHECK +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/simple_dataframe_slave.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/simple_dataframe_slave.cpp new file mode 100644 index 0000000..18b90bb --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/simple_dataframe_slave.cpp @@ -0,0 +1,152 @@ +#include "simple_dataframe_slave.h" +#include "data_holder.h" +#include "print.h" +#include "transport.h" + +Simple_dataframe::Simple_dataframe(Transport* _trans): trans(_trans) +{ + recv_state = STATE_RECV_FIX; +} + +bool Simple_dataframe::init() +{ + return true; +} + +bool Simple_dataframe::data_recv(unsigned char c) +{ + switch (recv_state) {// 根据当前接收的状态解析数据存储到active_rx_msg + case STATE_RECV_FIX: + if (c == FIX_HEAD){ + memset(&active_rx_msg,0, sizeof(active_rx_msg)); + active_rx_msg.head.flag = c; + active_rx_msg.check += c; + + recv_state = STATE_RECV_ID;//更新接收id状态 + } + break; + case STATE_RECV_ID: + if (c < ID_MESSGAE_MAX){ + active_rx_msg.head.msg_id = c; + active_rx_msg.check += c; + recv_state = STATE_RECV_LEN;//更新接收len状态 + } + else + recv_state = STATE_RECV_FIX; + break; + case STATE_RECV_LEN: + active_rx_msg.head.length =c; + active_rx_msg.check += c; + if (active_rx_msg.head.length==0) + recv_state = STATE_RECV_CHECK;//没有data段，直接更新到接收checksum状态 + else if (active_rx_msg.head.length>sizeof(active_rx_msg.data)) + recv_state = STATE_RECV_FIX; + else + recv_state = STATE_RECV_DATA;//更新接收数据 + break; + case STATE_RECV_DATA: + active_rx_msg.data[active_rx_msg.recv_count++] = c; + active_rx_msg.check += c; + if (active_rx_msg.recv_count >=active_rx_msg.head.length) + recv_state = STATE_RECV_CHECK;//接收完成，更新到接收checksum状态 + break; + case STATE_RECV_CHECK: + recv_state = STATE_RECV_FIX; + if (active_rx_msg.check == c) { //校验码校验 + return true; //返回true 标识接收到一帧正确的数据 + } + break; + default: + recv_state = STATE_RECV_FIX; + } + + return false; +} + +//接收到一帧正确的数据后被调用 +bool Simple_dataframe::data_parse() +{ + MESSAGE_ID id = (MESSAGE_ID)active_rx_msg.head.msg_id; + + //pb_printf("\r\ndata_parse:id=%d", id); + + Data_holder* dh = Data_holder::get(); + //更新接收到的id执行响应操作，一般分为读取，写入，和执行动作3个操作 + switch (id) { + case ID_GET_VERSION: // 读取版本信息 + send_message(id, (unsigned char*)&dh->firmware_info, sizeof(dh->firmware_info)); + break; + case ID_SET_ROBOT_PARAMTER: // 设置参数 + memcpy(&dh->parameter, active_rx_msg.data, sizeof(dh->parameter)); + send_message(id); + break; + case ID_GET_ROBOT_PARAMTER: // 读取参数 + send_message(id, (unsigned char*)&dh->parameter, sizeof(dh->parameter)); + break; + case ID_CLEAR_ODOM: // 清除里程信息， + send_message(id); // 回复数据，如果需要对改id的关注需要，调用register_notify接口注册对改id的关注 + break; + case ID_SET_VELOCITY: // 设置数据 + memcpy(&dh->velocity, active_rx_msg.data, sizeof(dh->velocity)); + send_message(id); + break; + case ID_GET_ODOM: // 获取里程计 + send_message(id, (unsigned char*)&dh->odom, sizeof(dh->odom)); + break; + case ID_GET_PID_DATA: // 获取用于调试的pid信息 + send_message(id, (unsigned char*)&dh->pid_data, sizeof(dh->pid_data)); + break; + case ID_GET_IMU_DATA: // 获取imu数据 + send_message(id, (unsigned char*)dh->imu_data, sizeof(dh->imu_data)); + break; + case ID_SET_MOTOR_PWM: + memcpy(&dh->pwm, active_rx_msg.data, sizeof(dh->pwm)); + send_message(id); + default: + break; + } + + // 根据已经注册的notify，回调update通知观察者 + if (id < ID_MESSGAE_MAX && nf[id] != 0) + nf[id]->update(id, &dh); + + // update后回复 + switch (id) { + case ID_GET_ENCODER_COUNT: + send_message(id, (unsigned char*)dh->encoder_count, sizeof(dh->encoder_count)); + break; + default: + break; + } + + return true; +} + +bool Simple_dataframe::send_message(const MESSAGE_ID id) +{ + Message msg(id); + + send_message(&msg); + + return true; +} + +bool Simple_dataframe::send_message(const MESSAGE_ID id, unsigned char* data, unsigned char len) +{ + Message msg(id, data, len); + + send_message(&msg); + + return true; +} + +bool Simple_dataframe::send_message(Message* msg) +{ + if (trans == 0) + return true; + + // 回复信息，通过使用的trans接口写数据 + trans->write((unsigned char*)msg, sizeof(msg->head)+msg->head.length+1); + + return true; +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/simple_dataframe_slave.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/simple_dataframe_slave.h new file mode 100644 index 0000000..2bd7bff --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/simple_dataframe_slave.h @@ -0,0 +1,47 @@ +#ifndef PIBOT_SIMPLE_DATAFRAME_SLAVE_H_ +#define PIBOT_SIMPLE_DATAFRAME_SLAVE_H_ + +#include "simple_dataframe.h" + +class Transport; + +// 一个简单的协议实现 详见https://www.jianshu.com/p/1dc5f9e2f90f +class Simple_dataframe : public Dataframe +{ +public: + /* 构造函数 + * @param trans 用于传输的接口 + */ + Simple_dataframe(Transport* trans=0); + + // 注册通知接口实现， 保存notify到数组以作映射 + virtual void register_notify(const MESSAGE_ID id, Notify* _nf) { + if (id >= ID_MESSGAE_MAX) + return; + nf[id] = _nf; + } + + // 初始化 + virtual bool init(); + + // 数据接口实现 + virtual bool data_recv(unsigned char c); + + // 数据解析实现 + virtual bool data_parse(); + + //预留 + virtual bool interact(const MESSAGE_ID id){return true;}; +private: + bool send_message(const MESSAGE_ID id); + bool send_message(const MESSAGE_ID id, unsigned char* data, unsigned char len); + bool send_message(Message* msg); +private: + Notify* nf[ID_MESSGAE_MAX]; // 用于保存notify的指针的数组 + + Message active_rx_msg; //保存当前接受的msg信息 + + RECEIVE_STATE recv_state; //当前接收数据所处状态 + Transport* trans; // 传输的接口 +}; +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/transport.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/transport.h new file mode 100644 index 0000000..3125d42 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/transport.h @@ -0,0 +1,17 @@ +#ifndef PIBOT_TRANSPORT_H_ +#define PIBOT_TRANSPORT_H_ + +// 传输数据接口， 继承改接口实现一个用于传输的接口 +class Transport +{ +public: + // 初始化 + virtual bool init()=0; + + // 读取数据 + virtual bool read(unsigned char& ch)=0; + + // 写入数据 + virtual void write(unsigned char* data, unsigned char len) = 0; +}; +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/usart_transport.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/usart_transport.cpp new file mode 100644 index 0000000..ba3c16f --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/usart_transport.cpp @@ -0,0 +1,22 @@ +#include "usart_transport.h" +#include "board.h" +#include "print.h" +#include "queue.h" + +USART_transport::USART_transport(unsigned char num, unsigned long buad) : usart_num(num), usart_buad(buad) +{ + +} + +bool USART_transport::init(){ + Board::get()->usart_init(usart_num, usart_buad); + return true; +} + +bool USART_transport::read(unsigned char& ch){ + return Board::get()->usart_getDataQueue(usart_num)->get(ch); +} + +void USART_transport::write(unsigned char* data, unsigned char len){ + Board::get()->usart_write(usart_num, data, len); +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/usart_transport.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/usart_transport.h new file mode 100644 index 0000000..e4aec59 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/usart_transport.h @@ -0,0 +1,19 @@ +#ifndef PIBOT_USART_TRANSPORT_H_ +#define PIBOT_USART_TRANSPORT_H_ + +#include "transport.h" + +// USART传输接口 +class USART_transport : public Transport +{ +public: + //构造函数 + USART_transport(unsigned char num, unsigned long buad); + virtual bool init(); + virtual bool read(unsigned char& ch); + virtual void write(unsigned char* data, unsigned char len); +private: + unsigned char usart_num; + unsigned long usart_buad; +}; +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/variable_queue.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/variable_queue.h new file mode 100644 index 0000000..b4bf207 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/Lib/Transport/variable_queue.h @@ -0,0 +1,75 @@ +#ifndef PIBOT_VARIABLE_QUEUE_H_ +#define PIBOT_VARIABLE_QUEUE_H_ + +#include +#include +#include "queue.h" + +//一个可设置size的ringbuffer模板实现 +template +class VQueue : public Queue +{ + public: + VQueue(); + virtual bool put(unsigned char ch); + virtual bool get(unsigned char& ch); + + virtual unsigned short size(); + virtual unsigned short max_size(); + private: + unsigned char _buffer[MAX_SIZE]; + unsigned short _max_size; + unsigned short _head; + unsigned short _tail; +}; + +template +VQueue::VQueue() +{ + _max_size = MAX_SIZE; + memset(_buffer, 0, MAX_SIZE); + _head = 0; + _tail = 0; +} + +template +unsigned short VQueue::size() +{ + return (_tail+_max_size-_head)%_max_size; +} + +template +unsigned short VQueue::max_size() +{ + return _max_size; +} + +template +bool VQueue::put(unsigned char ch) +{ + if (_tail+1 == _head) + return false; + + _buffer[_tail++] = ch; + + if (_tail >= MAX_SIZE) + _tail = 0; + + return true; +} + +template +bool VQueue::get(unsigned char& ch) +{ + if (_head == _tail) + return false; + + ch = _buffer[_head++]; + + if (_head >= MAX_SIZE) + _head = 0; + + return true; +} + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/RTE/RTE_Components.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/RTE/RTE_Components.h new file mode 100644 index 0000000..7b7e3bd --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/RTE/RTE_Components.h @@ -0,0 +1,20 @@ + +/* + * Auto generated Run-Time-Environment Component Configuration File + * *** Do not modify ! *** + * + * Project: 'pibot' + * Target: 'Target 1' + */ + +#ifndef RTE_COMPONENTS_H +#define RTE_COMPONENTS_H + + +/* + * Define the Device Header File: + */ +#define CMSIS_device_header "stm32f10x.h" + + +#endif /* RTE_COMPONENTS_H */ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/RTE/_Target_1/RTE_Components.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/RTE/_Target_1/RTE_Components.h new file mode 100644 index 0000000..5e19985 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/RTE/_Target_1/RTE_Components.h @@ -0,0 +1,21 @@ + +/* + * Auto generated Run-Time-Environment Configuration File + * *** Do not modify ! *** + * + * Project: 'pibot' + * Target: 'Target 1' + */ + +#ifndef RTE_COMPONENTS_H +#define RTE_COMPONENTS_H + + +/* + * Define the Device Header File: + */ +#define CMSIS_device_header "stm32f10x.h" + + + +#endif /* RTE_COMPONENTS_H */ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/main.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/main.cpp new file mode 100644 index 0000000..92eec51 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/main.cpp @@ -0,0 +1,24 @@ +#include "robot.h" + +int main(void) +{ + //初始化 + Robot::get()->init(); + + while (1) { + // 检测接收的命令 + Robot::get()->check_command(); + + // 运动解算 把上位机下发的机器人的速度（线速度角速度）转为各个轮子的速度 + Robot::get()->do_kinmatics(); + + // 根据轮子的编码器计算得到机器人的里程计 + Robot::get()->calc_odom(); + + // 读取imu的值 + Robot::get()->get_imu_data(); + + // 检测处理ps2的按键信息 + Robot::get()->check_joystick(); + } +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/robot.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/robot.cpp new file mode 100644 index 0000000..134e3ec --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/robot.cpp @@ -0,0 +1,554 @@ +#include "robot.h" + +#include "board.h" +#include "usart_transport.h" +#include "simple_dataframe_slave.h" +#include "data_holder.h" + + + +#if MOTOR_CONTROLLER == COMMON_CONTROLLER +#include "common_motor_controller.h" +#define MAX_PWM_VALUE 5000 +#elif MOTOR_CONTROLLER == AF_SHIELD_CONTROLLER +#include "afs_motor_controller.h" +#define MAX_PWM_VALUE 255 +#endif + +#include "encoder_implement.h" +#include "pid.h" +#include "board_stm32.h" + +#if IMU_ENABLE +#include "GY65.h" +#include "GY85.h" +#include "GY87.h" +#endif + +#if JOYSTICK_ENABLE +#include "joystick.h" +#endif + +#include "print.h" + +#define min(a,b) ((a)<(b)?(a):(b)) +#define max(a,b) ((a)>(b)?(a):(b)) + +Robot::Robot() +{ + for (int i=0;iinit(); + +#if DEBUG_ENABLE + // 调试串口初始化 + Board::get()->usart_debug_init(); +#endif + + // 加载参数， 该参数一般存储在flash或者eeprom + Data_holder::get()->load_parameter(); + + pb_printf("RobotParameters: %d %d %d %d %d %d %d %d %d %d %d %d %d", + Data_holder::get()->parameter.params.wheel_diameter, Data_holder::get()->parameter.params.wheel_track, Data_holder::get()->parameter.params.encoder_resolution, Data_holder::get()->parameter.params.motor_ratio, + Data_holder::get()->parameter.params.do_pid_interval, Data_holder::get()->parameter.params.kp, Data_holder::get()->parameter.params.ki, Data_holder::get()->parameter.params.kd, Data_holder::get()->parameter.params.ko, + Data_holder::get()->parameter.params.cmd_last_time, Data_holder::get()->parameter.params.max_v_liner_x, Data_holder::get()->parameter.params.max_v_liner_y, Data_holder::get()->parameter.params.max_v_angular_z); + +#if IMU_ENABLE + // imu 初始化 + init_imu(); +#endif + + pb_printf("init_motor"); + // 电机相关初始化 + init_motor(); + + pb_printf("init_trans"); + // 通讯相关初始化 + init_trans(); + + // joystick初始化 + init_joystick(); + + pb_printf("pibot startup"); +} + +void Robot::init_imu() +{ + pb_printf("init imu"); +#if IMU_ENABLE + if (Data_holder::get()->parameter.params.imu_type == IMU_TYPE_GY65) { + pb_printf("imu gy65"); + static GY65 gy65; + imu = &gy65; + } else if (Data_holder::get()->parameter.params.imu_type == IMU_TYPE_GY85 ) { + pb_printf("imu gy85"); + static GY85 gy85; + imu = &gy85; + } else if (Data_holder::get()->parameter.params.imu_type == IMU_TYPE_GY87) { + pb_printf("imu gy87"); + static GY87 gy87; + imu = &gy87; + } else { + pb_printf("imu default null driver"); + imu = NULL; + } + + if (imu != NULL) { + imu->init(); + } +#endif +} + +void Robot::init_joystick() +{ +#if JOYSTICK_ENABLE + static Joystick joy; + joystick = &joy; + if (joystick) + joystick->init(); +#endif +} + +void Robot::init_motor() +{ + //MOTOR_COUNT为电机数量 该宏定义在相应的机器人模型文件中， KinematicModels/differential.h +#if MOTOR_COUNT>0 //电机1 + // MOTOR_CONTROLLER在params.mk中定义 表示电机控制器类型 + // 当前使用的COMMON_CONTROLLER为2个io控制方向一个PWD控制速度类型的控制器 + #if MOTOR_CONTROLLER == COMMON_CONTROLLER + static CommonMotorController motor1(MOTOR_1, MAX_PWM_VALUE, (Data_holder::get()->parameter.params.motor_nonexchange_flag & MOTOR_ENCODER_1_FLAG)==0); // MOTOR1_REVERS标识电机方向反向,等同于电机线交换 + #elif MOTOR_CONTROLLER == AF_SHIELD_CONTROLLER + static AFSMotorController motor1(MOTOR_1_PORT_NUM, MAX_PWM_VALUE); + #endif + + // 定义使用的编码器 传入参数为编码器的AB GPIO引脚 定义在params.mk中 + static EncoderImp encoder1(MOTOR_1, (Data_holder::get()->parameter.params.encoder_nonexchange_flag & MOTOR_ENCODER_1_FLAG)==0); + + // 定义PID控制对象 传入参数为输入和输出的地址及kp ki kd 这里ko为比例 + static PID pid1(&input[0], &feedback[0], float(Data_holder::get()->parameter.params.kp)/Data_holder::get()->parameter.params.ko, + float(Data_holder::get()->parameter.params.ki)/Data_holder::get()->parameter.params.ko, + float(Data_holder::get()->parameter.params.kd)/Data_holder::get()->parameter.params.ko , MAX_PWM_VALUE); +#endif + +#if MOTOR_COUNT>1 //电机2 + #if MOTOR_CONTROLLER == COMMON_CONTROLLER + static CommonMotorController motor2(MOTOR_2, MAX_PWM_VALUE, (Data_holder::get()->parameter.params.motor_nonexchange_flag & MOTOR_ENCODER_2_FLAG)==0); // MOTOR1_REVERS标识电机方向反向,等同于电机线交换 + #elif MOTOR_CONTROLLER == AF_SHIELD_CONTROLLER + static AFSMotorController motor2(MOTOR_2_PORT_NUM, MAX_PWM_VALUE); + #endif + static EncoderImp encoder2(MOTOR_2, (Data_holder::get()->parameter.params.encoder_nonexchange_flag & MOTOR_ENCODER_2_FLAG)==0); + static PID pid2(&input[1], &feedback[1], float(Data_holder::get()->parameter.params.kp)/Data_holder::get()->parameter.params.ko, + float(Data_holder::get()->parameter.params.ki)/Data_holder::get()->parameter.params.ko, + float(Data_holder::get()->parameter.params.kd)/Data_holder::get()->parameter.params.ko , MAX_PWM_VALUE); +#endif + +#if MOTOR_COUNT>2 //电机3 + #if MOTOR_CONTROLLER == COMMON_CONTROLLER + static CommonMotorController motor3(MOTOR_3, MAX_PWM_VALUE, (Data_holder::get()->parameter.params.motor_nonexchange_flag & MOTOR_ENCODER_3_FLAG)==0); // MOTOR1_REVERS标识电机方向反向,等同于电机线交换 + #elif MOTOR_CONTROLLER == AF_SHIELD_CONTROLLER + static AFSMotorController motor3(MOTOR_3); + #endif + + static EncoderImp encoder3(MOTOR_3, (Data_holder::get()->parameter.params.encoder_nonexchange_flag & MOTOR_ENCODER_3_FLAG)==0); + static PID pid3(&input[2], &feedback[2], float(Data_holder::get()->parameter.params.kp)/Data_holder::get()->parameter.params.ko, + float(Data_holder::get()->parameter.params.ki)/Data_holder::get()->parameter.params.ko, + float(Data_holder::get()->parameter.params.kd)/Data_holder::get()->parameter.params.ko , MAX_PWM_VALUE); +#endif + + // 分别把地址保存在统一的数组内， 方便处理 +#if MOTOR_COUNT>0 + motor[0] = &motor1; + encoder[0] = &encoder1; + pid[0] = &pid1; +#endif + +#if MOTOR_COUNT>1 + motor[1] = &motor2; + encoder[1] = &encoder2; + pid[1] = &pid2; +#endif + +#if MOTOR_COUNT>2 + motor[2] = &motor3; + encoder[2] = &encoder3; + pid[2] = &pid3; +#endif + +// 根据定义的模型参数ROBOT_MODEL， 创建模型对象及保存地址 +#if ROBOT_MODEL == MODEL_TYPE_2WD_DIFF //2轮差分 + static Differential diff(Data_holder::get()->parameter.params.wheel_diameter*0.0005, Data_holder::get()->parameter.params.wheel_track*0.0005); + model = &diff; +#endif + +#if ROBOT_MODEL == MODEL_TYPE_3WD_OMNI //三轮全向 + static Omni3 omni3(Data_holder::get()->parameter.params.wheel_diameter*0.0005, Data_holder::get()->parameter.params.wheel_track*0.0005); + model = &omni3; +#endif + + // 分别初始化各个控制器 + for (int i=0;iinit(); + motor[i]->init(); + } + + // 初始化各个变量 + do_kinmatics_flag = false; + + memset(&odom, 0 , sizeof(odom)); + memset(&input, 0 , sizeof(input)); + memset(&feedback, 0 , sizeof(feedback)); + + last_velocity_command_time = 0; +} + +void Robot::init_trans() +{ + //定义一个串口通讯对象 ！！！注意这里USART_transport继承实现Transport接口， + // 实现了一个通讯对象，这么做的原因是，如果我换为其他通讯方式，例如USB，只需要创建一个USB_Transport继承实现实现Transport接口就可以实现 + static USART_transport _trans(MASTER_USART, 115200); + + // 定义一个通讯协议处理对象， 同上， 我们需要更换协议只需要继承实现Dataframe的接口就可以实现 + static Simple_dataframe _frame(&_trans); + + // 保存对象指针 + trans = &_trans; + frame = &_frame; + + // 初始化 + trans->init(); + frame->init(); + + // 注册消息处理对象 ！！！ 这里把各个消息id的处理注册了一个观察者， 即再收到相应的消息后会回调update函数 + // Robot(this)继承实现了notify + frame->register_notify(ID_SET_ROBOT_PARAMTER, this); + frame->register_notify(ID_CLEAR_ODOM, this); + frame->register_notify(ID_SET_VELOCITY, this); + frame->register_notify(ID_GET_ENCODER_COUNT, this); + frame->register_notify(ID_SET_MOTOR_PWM, this); +} + +void Robot::check_command() +{ + static unsigned long last_millis=0; + // 运行LED灯闪烁 + if (Board::get()->get_tick_count()-last_millis>=50){ + last_millis = Board::get()->get_tick_count(); + Board::get()->setDOState(_RUN_LED, 2); + } + + unsigned char ch=0; + + //从通讯设备(trans)读取数据交给协议处理模块(frame)处理 + if (trans->read(ch)) { + if (frame->data_recv(ch)) { + frame->data_parse(); // 这里检测到正确的一帧命令，做解析 + } + } +} + +// 实现Notify接口， 上面注册的命令id接收到时候，会回调，执行响应的动作 +void Robot::update(const MESSAGE_ID id, void* data) +{ + switch (id) { + case ID_SET_ROBOT_PARAMTER: //设置参数的回调， 这里会更新pid的参数， model的参数， 最终保存到flash + + pb_printf("RobotParameters: %d %d %d %d %d %d %d %d %d %d %d %d %d", + Data_holder::get()->parameter.params.wheel_diameter, Data_holder::get()->parameter.params.wheel_track, Data_holder::get()->parameter.params.encoder_resolution, Data_holder::get()->parameter.params.motor_ratio, + Data_holder::get()->parameter.params.do_pid_interval, Data_holder::get()->parameter.params.kp, Data_holder::get()->parameter.params.ki, Data_holder::get()->parameter.params.kd, Data_holder::get()->parameter.params.ko, + Data_holder::get()->parameter.params.cmd_last_time, Data_holder::get()->parameter.params.max_v_liner_x, Data_holder::get()->parameter.params.max_v_liner_y, Data_holder::get()->parameter.params.max_v_angular_z); + // 更新pid参数， 这样可以保证设置参数实时生效 + for (int i=0;iupdate(float(Data_holder::get()->parameter.params.kp)/Data_holder::get()->parameter.params.ko, + float(Data_holder::get()->parameter.params.ki)/Data_holder::get()->parameter.params.ko, + float(Data_holder::get()->parameter.params.kd)/Data_holder::get()->parameter.params.ko , MAX_PWM_VALUE); + } + + // 更新模型参数， 这样可以保证设置参数实时生效 + model->set(Data_holder::get()->parameter.params.wheel_diameter*0.0005, Data_holder::get()->parameter.params.wheel_track*0.0005); + + // 保存参数到flash + Data_holder::get()->save_parameter(); + break; + case ID_CLEAR_ODOM: // 清除里程计信息 + clear_odom(); + break; + case ID_SET_VELOCITY: // 设置机器人的速度 + update_velocity(); //更新机器人的期望速度 + break; + case ID_GET_ENCODER_COUNT: + update_encoder_count(); // 更新encoder count + break; + case ID_SET_MOTOR_PWM: + update_pwm_value(); // 设置pwm值 + break; + default: + break; + } +} + +// 清除里程计数据及相关变量 +void Robot::clear_odom() +{ + for (int i=0;iclear(); + } + + memset(&odom, 0, sizeof(odom)); + memset(&Data_holder::get()->odom, 0, sizeof(Data_holder::get()->odom)); +} + +#define __PI 3.1415926535897932384626433832795 + +//根据下发的速度更新期望速度， 并转为pid时间间隔内的期望编码器的变化值 +void Robot::update_velocity() +{ + // 下发速度检测 保证限制在设置的最大最小值内 + short vx = min(max(Data_holder::get()->velocity.v_liner_x, -(short(Data_holder::get()->parameter.params.max_v_liner_x))), short(Data_holder::get()->parameter.params.max_v_liner_x)); + short vy = min(max(Data_holder::get()->velocity.v_liner_y, -(short(Data_holder::get()->parameter.params.max_v_liner_y))), short(Data_holder::get()->parameter.params.max_v_liner_y)); + short vz = min(max(Data_holder::get()->velocity.v_angular_z, -(short(Data_holder::get()->parameter.params.max_v_angular_z))), short(Data_holder::get()->parameter.params.max_v_angular_z)); + + float vel[3]={vx/100.0, vy/100.0, vz/100.0}; // 保存速度转换单位 传入的速度值为cm/s 0.01rad/s 转为m/s 和rad/s + float motor_speed[MOTOR_COUNT]={0}; + model->motion_solver(vel, motor_speed); // 期望的机器人的速度转换为各个电机的速度(通过设置的机器人模型接口) + + // 把得到的期望电机速度 (m/s)转换为期望pid时间间隔内编码器反馈的输入 + // 该值即为PID的输入 + for(int i=0;iparameter.params.encoder_resolution)*short(Data_holder::get()->parameter.params.motor_ratio)/(2*__PI)*short(Data_holder::get()->parameter.params.do_pid_interval)*0.001; + } + + //pb_printf("vx=%d %d motor_speed=%ld %ld", vx, vz, long(motor_speed[0]*1000), long(motor_speed[1]*1000)); + + //保存时间戳 + last_velocity_command_time = Board::get()->get_tick_count(); + + // 更新变量， 激活pid运算和控制电机 + do_kinmatics_flag = true; +} + +void Robot::update_encoder_count() +{ + for (int i=0; iencoder_count[i] = encoder[i]->get_total_count();//输出累计编码器值 用于调试 + } + //pb_printf("encoder = motor0 = %d, motor1 = %d\n", encoder[0]->get_total_count(),encoder[1]->get_total_count()); +} + +void Robot::update_pwm_value() +{ + do_set_pwm_flag = true; +} + +// pid运算， 控制电机 +void Robot::do_kinmatics() +{ + if (do_set_pwm_flag) { + do_set_pwm_flag = false; + + for (int i=0; icontrol(Data_holder::get()->pwm.value[i]); + } + } + + if (!do_kinmatics_flag) { // 停止后 + for(int i=0;iclear(); // 清除pid + encoder[i]->get_increment_count_for_dopid();// 实时更新用于pid的encoder值 + } + return; //do_kinmatics_flag false表示电机停止 不需要做pid 故返回 + } + + static unsigned long last_millis=0; + // 判断时间间隔做pid运算 + if (Board::get()->get_tick_count()-last_millis>=Data_holder::get()->parameter.params.do_pid_interval) { + last_millis = Board::get()->get_tick_count(); + + //得到编码器的反馈差值， 即在do_pid_interval这段间隔时间内编码器的差值， 该值作为pid的反馈 + for (int i=0;iget_increment_count_for_dopid(); + } +#if PID_DEBUG_OUTPUT + #if MOTOR_COUNT==2 + pb_printf("input=%ld %ld feedback=%ld %ld", long(input[0]*1000), long(input[1]*1000), + long(feedback[0]), long(feedback[1])); + #endif + #if MOTOR_COUNT==3 + pb_printf("input=%ld %ld %ld feedback=%ld %ld %ld", long(input[0]*1000), long(input[1]*1000), long(input[2]*1000), + long(feedback[0]), long(feedback[1]), long(feedback[2])); + #endif + #if MOTOR_COUNT==4 + pb_printf("input=%ld %ld %ld %ld feedback=%ld %ld %ld %ld", long(input[0]*1000), long(input[1]*1000), long(input[2]*1000), long(input[3]*1000), + long(feedback[0]), long(feedback[1]), long(feedback[2]), long(feedback[3])); + #endif +#endif + bool stoped=true; + //当期望和反馈都为0 置位stoped标志 + for (int i=0;icompute(Data_holder::get()->parameter.params.do_pid_interval*0.001); + } + } + + //当次计算完成 重置变量 + for (int i=0;ipid_data.input[i] = int(input[i]); + Data_holder::get()->pid_data.output[i] = int(feedback[i]); + } + +#if PID_DEBUG_OUTPUT + #if MOTOR_COUNT==2 + pb_printf("output=%ld %ld", output[0], output[1]); + #endif + #if MOTOR_COUNT==3 + pb_printf("output=%ld %ld %ld", output[0], output[1], output[2]); + #endif + #if MOTOR_COUNT==4 + pb_printf("output=%ld %ld %ld %ld", output[0], output[1], output[2], output[3]); + #endif +#endif + + long elapsed_ms = Board::get()->get_tick_count()-last_velocity_command_time; + //判断上次下发的时间戳，如果超时，把各个电机期望的输入置零，pid下次会根据改期望计算pid输出转速，慢慢停止点击 + if (elapsed_ms > Data_holder::get()->parameter.params.cmd_last_time) { + memset(input, 0, sizeof(input)); + if (elapsed_ms > Data_holder::get()->parameter.params.cmd_last_time*2) { + memset(output, 0, sizeof(output)); + } + } + + // 把pid得到的值交给电机控制器，该值有符号表示正反转 + for (int i=0;icontrol(output[i]); + } + } +} + +//计算里程计 +void Robot::calc_odom() +{ + static unsigned long last_millis=0; + //根据实际间隔计算轮子里程 + if (Board::get()->get_tick_count()-last_millis>=CALC_ODOM_INTERVAL) { + last_millis = Board::get()->get_tick_count(); +#if ODOM_DEBUG_OUTPUT + long total_count[MOTOR_COUNT]={0}; + for (int i=0;iget_total_count(); //输出累计编码器值 用于调试 + } + + #if MOTOR_COUNT==2 + pb_printf("total_count=[%ld %ld]", total_count[0], total_count[1]); + #endif + #if MOTOR_COUNT==3 + pb_printf("total_count=[%ld %ld %ld]", total_count[0], total_count[1], total_count[2]); + #endif + #if MOTOR_COUNT==4 + pb_printf("total_count=[%ld %ld %ld %ld]", total_count[0], total_count[1], total_count[2], total_count[3]); + #endif +#endif + float dis[MOTOR_COUNT] = {0}; + for (int i=0;iget_increment_count_for_odom()*__PI*Data_holder::get()->parameter.params.wheel_diameter*0.001/Data_holder::get()->parameter.params.encoder_resolution/Data_holder::get()->parameter.params.motor_ratio; +#if ODOM_DEBUG_OUTPUT + //pb_printf(" %ld ", long(dis[i]*1000000)); +#endif + } + + + // 把计算得到的各个电机的里程转为为机器人里程(通过机器人运动模型对象) + model->get_odom(&odom, dis, CALC_ODOM_INTERVAL); + +#if ODOM_DEBUG_OUTPUT + // 输出机器人的里程 + pb_printf(" x=%ld y=%ld yaw=%ld", long(odom.x*1000), long(odom.y*1000), long(odom.z*1000));//mm +#endif + + // 转换单位保存到Data_holder + Data_holder::get()->odom.v_liner_x = odom.vel_x*100; //转为cm/s + Data_holder::get()->odom.v_liner_y = odom.vel_y*100; + Data_holder::get()->odom.v_angular_z = odom.vel_z*100; + Data_holder::get()->odom.x = odom.x*100; //转为cm + Data_holder::get()->odom.y = odom.y*100; + Data_holder::get()->odom.yaw = long(odom.z*100)%628;//转为0.01rad 628为2pi*100 + } +} + +//获取imu数据 +void Robot::get_imu_data() +{ +#if IMU_ENABLE + if (imu == NULL) { + return; + } + + static unsigned long last_millis=0; + //按照设置的时间间隔获取imu数据 + if (Board::get()->get_tick_count()-last_millis>=CALC_IMU_INTERVAL) { + last_millis = Board::get()->get_tick_count(); + imu->get_data(Data_holder::get()->imu_data); + } +#endif +} + +//检测joystick +void Robot::check_joystick() +{ +#if JOYSTICK_ENABLE + if (joystick == NULL) { + return; + } + + static unsigned long last_millis=0; + short liner_x=0, liner_y=0, angular_z=0; + if (Board::get()->get_tick_count()-last_millis>=CHECK_JOYSTICK_INTERVAL){ + last_millis = Board::get()->get_tick_count(); + // 按照设置的间隔间隔 更新期望速度 + if (joystick->check(liner_x, liner_y, angular_z)) { + Data_holder::get()->velocity.v_liner_x = liner_x; + Data_holder::get()->velocity.v_liner_y = liner_y; + Data_holder::get()->velocity.v_angular_z = angular_z; + update_velocity(); + } + + joystick->test(); + } +#endif +} diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/robot.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/robot.h new file mode 100644 index 0000000..e91d661 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/robot.h @@ -0,0 +1,119 @@ +#ifndef PIBOT_ROBOT_H_ +#define PIBOT_ROBOT_H_ + +#include "dataframe.h" + +#if ROBOT_MODEL == MODEL_TYPE_2WD_DIFF +#include "differential.h" +#endif + +#if ROBOT_MODEL == MODEL_TYPE_3WD_OMNI +#include "omni3.h" +#endif + +class MotorController; +class Encoder; +class PID; +class Transport; +class Dataframe; +class Model; +class IMU; +class Joystick; + +// Robot 类继承Notify接口， 实现一个对接收的消息id处理（update接口中) +class Robot:public Notify +{ +public: + static Robot* get() { + static Robot robot; + return &robot; + } + + // 初始化 + void init(); + + // 检测串口数据命令 + void check_command(); + + // 运动解算 + void do_kinmatics(); + + // 计算里程计 + void calc_odom(); + + //获取imu数据 + void get_imu_data(); + + // 检测joystick的按键 + void check_joystick(); + + // 实现Notify接口处理 绑定的消息 + virtual void update(const MESSAGE_ID id, void* data); +private: + Robot(); + //初始化 + void init_imu(); + void init_joystick(); + void init_motor(); + void init_trans(); +private: + // 清除里程计 + void clear_odom(); + + // 更新当前机器人的速度 + void update_velocity(); + + // 更新编码器值 + void update_encoder_count(); + + // 更新设置pwm标志 + void update_pwm_value(); +private: + // 电机控制器接口 + MotorController* motor[MOTOR_COUNT]; + + // 电机编码器接口 + Encoder* encoder[MOTOR_COUNT]; + + // PID接口 用于电机调速 + PID* pid[MOTOR_COUNT]; + + // 每个轮子编码器在pid时间间隔内期望变化值(根据输入速度计算得到) + float input[MOTOR_COUNT]; + + // 每个轮子编码器在pid时间间隔内实际变化值(根据编码器的反馈计算得到) + float feedback[MOTOR_COUNT]; + + // 用于通讯的接口 (uart/usb) + Transport* trans; + + // 用于通讯的通讯协议接口（自定义协议) + Dataframe* frame; + + // 机器人模型接口， 用于运动解算和反解算 + Model* model; + + // 是否进行运动计算的标志 （接收到新的速度时候更新） + bool do_kinmatics_flag; + + // 是否进行设置pwm的标志 （接收到新的电机控制命令时候更新） + bool do_set_pwm_flag; + + // 保存里程计信息 + Odom odom; + + // 上一次收到命令的时间戳 用于超时计算， 在一段时间超时后仍没收到命令后会停止电机 + unsigned long last_velocity_command_time; + +#if IMU_ENABLE + // imu接口 + IMU* imu; +#endif + +#if JOYSTICK_ENABLE + // 遥控器接口 + Joystick* joystick; +#endif +}; + +#endif diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/stm32f10x_conf.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/stm32f10x_conf.h new file mode 100644 index 0000000..cbb8819 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/stm32f10x_conf.h @@ -0,0 +1,77 @@ +/** + ****************************************************************************** + * @file Project/STM32F10x_StdPeriph_Template/stm32f10x_conf.h + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Library configuration file. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CONF_H +#define __STM32F10x_CONF_H + +/* Includes ------------------------------------------------------------------*/ +/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */ +#include "stm32f10x_adc.h" +#include "stm32f10x_bkp.h" +#include "stm32f10x_can.h" +#include "stm32f10x_cec.h" +#include "stm32f10x_crc.h" +#include "stm32f10x_dac.h" +#include "stm32f10x_dbgmcu.h" +#include "stm32f10x_dma.h" +#include "stm32f10x_exti.h" +#include "stm32f10x_flash.h" +#include "stm32f10x_fsmc.h" +#include "stm32f10x_gpio.h" +#include "stm32f10x_i2c.h" +#include "stm32f10x_iwdg.h" +#include "stm32f10x_pwr.h" +#include "stm32f10x_rcc.h" +#include "stm32f10x_rtc.h" +#include "stm32f10x_sdio.h" +#include "stm32f10x_spi.h" +#include "stm32f10x_tim.h" +#include "stm32f10x_usart.h" +#include "stm32f10x_wwdg.h" +#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Uncomment the line below to expanse the "assert_param" macro in the + Standard Peripheral Library drivers code */ +/* #define USE_FULL_ASSERT 1 */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT + +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function which reports + * the name of the source file and the source line number of the call + * that failed. If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#endif /* __STM32F10x_CONF_H */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/stm32f10x_it.cpp b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/stm32f10x_it.cpp new file mode 100644 index 0000000..9132091 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/stm32f10x_it.cpp @@ -0,0 +1,207 @@ +/** + ****************************************************************************** + * @file Project/STM32F10x_StdPeriph_Template/stm32f10x_it.c + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Main Interrupt Service Routines. + * This file provides template for all exceptions handler and + * peripherals interrupt service routine. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_it.h" +#include +#include "stm32f10x_exti.h" + #include "board.h" +#ifdef __cplusplus +extern "C" { +#endif +/** @addtogroup STM32F10x_StdPeriph_Template + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/******************************************************************************/ +/* Cortex-M3 Processor Exceptions Handlers */ +/******************************************************************************/ + +/** + * @brief This function handles NMI exception. + * @param None + * @retval None + */ +void NMI_Handler(void) +{ +} + +/** + * @brief This function handles Hard Fault exception. + * @param None + * @retval None + */ +void HardFault_Handler(void) +{ + /* Go to infinite loop when Hard Fault exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles Memory Manage exception. + * @param None + * @retval None + */ +void MemManage_Handler(void) +{ + /* Go to infinite loop when Memory Manage exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles Bus Fault exception. + * @param None + * @retval None + */ +void BusFault_Handler(void) +{ + /* Go to infinite loop when Bus Fault exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles Usage Fault exception. + * @param None + * @retval None + */ +void UsageFault_Handler(void) +{ + /* Go to infinite loop when Usage Fault exception occurs */ + while (1) + { + } +} + +/** + * @brief This function handles SVCall exception. + * @param None + * @retval None + */ +void SVC_Handler(void) +{ +} + +/** + * @brief This function handles Debug Monitor exception. + * @param None + * @retval None + */ +void DebugMon_Handler(void) +{ +} + +/** + * @brief This function handles PendSVC exception. + * @param None + * @retval None + */ +void PendSV_Handler(void) +{ +} + +/** + * @brief This function handles SysTick Handler. + * @param None + * @retval None + */ + +#if 0 +void SysTick_Handler(void) +{ + + +} +#endif + +#if MASTER_USART == 3 +void USART3_IRQHandler(void) +{ + unsigned char data = 0; + + if (USART_GetITStatus(USART3, USART_IT_RXNE) != RESET) + { + data=USART_ReceiveData(USART3); + if (!Board::get()->usart_getDataQueue(USART_3)->put(data)){ + //err + } + USART_ClearITPendingBit(USART3,USART_IT_RXNE); //clear interrupt flag + } +} +#endif + + +#if MASTER_USART == 2 +void USART2_IRQHandler(void) +{ + unsigned char data = 0; + + if (USART_GetITStatus(USART2, USART_IT_RXNE) != RESET) + { + data=USART_ReceiveData(USART2); + if (!Board::get()->usart_getDataQueue(USART_2)->put(data)){ + //err + } + USART_ClearITPendingBit(USART2,USART_IT_RXNE); //clear interrupt flag + } +} +#endif + + +/******************************************************************************/ +/* STM32F10x Peripherals Interrupt Handlers */ +/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ +/* available peripheral interrupt handler's name please refer to the startup */ +/* file (startup_stm32f10x_xx.s). */ +/******************************************************************************/ + +/** + * @brief This function handles PPP interrupt request. + * @param None + * @retval None + */ +/*void PPP_IRQHandler(void) +{ +}*/ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/stm32f10x_it.h b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/stm32f10x_it.h new file mode 100644 index 0000000..8890262 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/User/stm32f10x_it.h @@ -0,0 +1,54 @@ +/** + ****************************************************************************** + * @file Project/STM32F10x_StdPeriph_Template/stm32f10x_it.h + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_IT_H +#define __STM32F10x_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_IT_H */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/params.mk b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/params.mk new file mode 100644 index 0000000..a535a42 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/params.mk @@ -0,0 +1,50 @@ + +#common + +#model +-DMODEL_TYPE_2WD_DIFF=1 +-DMODEL_TYPE_4WD_DIFF=2 +-DMODEL_TYPE_3WD_OMNI=101 +-DMODEL_TYPE_4WD_OMNI=102 +-DMODEL_TYPE_4WD_MECANUM=201 + + +-DROBOT_MODEL=MODEL_TYPE_2WD_DIFF +-DFW_VERSION=\"v2.1.0\" + +#motor +-DCOMMON_CONTROLLER=1 +-DAF_SHIELD_CONTROLLER=2 +-DMOTOR_CONTROLLER=COMMON_CONTROLLER + +-DMOTOR_DRIVER_TB6612=1 +-DMOTOR_DRIVER_DRV8870=2 + +-DMOTOR_DRIVER=MOTOR_DRIVER_TB6612 + +#uart +-DMASTER_USART=2 + +#debug +-DDEBUG_ENABLE=1 +-DODOM_DEBUG_OUTPUT=1 +-DPID_DEBUG_OUTPUT=0 + +#joystick +-DJOYSTICK_ENABLE=0 +-DJOYSTICK_DEBUG_ENABLE=0 +-DJOYSTICK_FOR_HOLONOMIC=0 + +#speed +-DMAX_LINER_X=50 +-DMAX_LINER_Y=0 +-DMAX_ANGULAR_Z=250 + +#imu +-DIMU_ENABLE=1 +-DIMU_DEBUG_ENABLE=0 + +# intervel +-DCALC_ODOM_INTERVAL=10 +-DCHECK_JOYSTICK_INTERVAL=100 +-DCALC_IMU_INTERVAL=1 \ No newline at end of file diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/pibot.uvoptx b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/pibot.uvoptx new file mode 100644 index 0000000..9ae53f8 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/pibot.uvoptx @@ -0,0 +1,768 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + Target 1 + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 18 + + + 0 + Base Board Schematics (MCBSTM32E) + D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Documents\mcbstm32e-base-board-schematics.pdf + + + 1 + Display Board Schematics (MCBSTM32E) + D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Documents\mcbstm32e-display-board-schematics.pdf + + + 2 + User Manual (MCBSTM32E) + D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Documents\mcbstm32e.chm + + + 3 + MCBSTM32E Evaluation Board Web Page (MCBSTM32E) + http://www.keil.com/mcbstm32e/ + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 5 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + ST-LINKIII-KEIL_SWO + -U303030303030303030303031 -I0 -O206 -S1 -C0 -A0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM) + + + 0 + JL2CM3 + -U69408076 -O78 -S5 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM) + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + + + 0 + + 1 + 0 + 2 + 10000000 + + + + + + FWlib + 0 + 0 + 0 + 0 + + 1 + 1 + 1 + 0 + 0 + 0 + .\FWlib\src\misc.c + misc.c + 0 + 0 + + + 1 + 2 + 1 + 0 + 0 + 0 + .\FWlib\src\stm32f10x_exti.c + stm32f10x_exti.c + 0 + 0 + + + 1 + 3 + 1 + 0 + 0 + 0 + .\FWlib\src\stm32f10x_gpio.c + stm32f10x_gpio.c + 0 + 0 + + + 1 + 4 + 1 + 0 + 0 + 0 + .\FWlib\src\stm32f10x_i2c.c + stm32f10x_i2c.c + 0 + 0 + + + 1 + 5 + 1 + 0 + 0 + 0 + .\FWlib\src\stm32f10x_rcc.c + stm32f10x_rcc.c + 0 + 0 + + + 1 + 6 + 1 + 0 + 0 + 0 + .\FWlib\src\stm32f10x_tim.c + stm32f10x_tim.c + 0 + 0 + + + 1 + 7 + 1 + 0 + 0 + 0 + .\FWlib\src\stm32f10x_usart.c + stm32f10x_usart.c + 0 + 0 + + + 1 + 8 + 1 + 0 + 0 + 0 + .\FWlib\src\stm32f10x_dac.c + stm32f10x_dac.c + 0 + 0 + + + 1 + 9 + 1 + 0 + 0 + 0 + .\FWlib\src\stm32f10x_flash.c + stm32f10x_flash.c + 0 + 0 + + + 1 + 10 + 1 + 0 + 0 + 0 + .\FWlib\src\stm32f10x_pwr.c + stm32f10x_pwr.c + 0 + 0 + + + 1 + 11 + 1 + 0 + 0 + 0 + .\FWlib\src\stm32f10x_rtc.c + stm32f10x_rtc.c + 0 + 0 + + + + + CMSIS + 0 + 0 + 0 + 0 + + 2 + 12 + 1 + 0 + 0 + 0 + .\CMSIS\core_cm3.c + core_cm3.c + 0 + 0 + + + 2 + 13 + 1 + 0 + 0 + 0 + .\CMSIS\system_stm32f10x.c + system_stm32f10x.c + 0 + 0 + + + + + USER + 1 + 0 + 0 + 0 + + 3 + 14 + 8 + 0 + 0 + 0 + .\User\main.cpp + main.cpp + 0 + 0 + + + 3 + 15 + 8 + 0 + 0 + 0 + .\User\robot.cpp + robot.cpp + 0 + 0 + + + 3 + 16 + 8 + 0 + 0 + 0 + .\User\stm32f10x_it.cpp + stm32f10x_it.cpp + 0 + 0 + + + + + STARTUP + 0 + 0 + 0 + 0 + + 4 + 17 + 2 + 0 + 0 + 0 + .\CMSIS\startup\startup_stm32f10x_md.s + startup_stm32f10x_md.s + 0 + 0 + + + + + Lib + 1 + 0 + 0 + 0 + + 5 + 18 + 8 + 0 + 0 + 0 + .\Lib\Transport\simple_dataframe_slave.cpp + simple_dataframe_slave.cpp + 0 + 0 + + + 5 + 19 + 8 + 0 + 0 + 0 + .\Lib\Transport\usart_transport.cpp + usart_transport.cpp + 0 + 0 + + + 5 + 20 + 8 + 0 + 0 + 0 + .\Lib\PID\pid.cpp + pid.cpp + 0 + 0 + + + 5 + 21 + 8 + 0 + 0 + 0 + .\Lib\Motor\common_motor_controller.cpp + common_motor_controller.cpp + 0 + 0 + + + 5 + 22 + 8 + 0 + 0 + 0 + .\Lib\Encoder\encoder_implement.cpp + encoder_implement.cpp + 0 + 0 + + + 5 + 23 + 8 + 0 + 0 + 0 + .\Lib\DataHolder\data_holder.cpp + data_holder.cpp + 0 + 0 + + + 5 + 24 + 8 + 0 + 0 + 0 + .\Lib\Board\board_stm32.cpp + board_stm32.cpp + 0 + 0 + + + 5 + 25 + 8 + 0 + 0 + 0 + .\Lib\Joystick\joystick.cpp + joystick.cpp + 0 + 0 + + + 5 + 26 + 8 + 0 + 0 + 0 + .\Lib\PS2\pstwo.cpp + pstwo.cpp + 0 + 0 + + + 5 + 27 + 8 + 0 + 0 + 0 + .\Lib\IMU\ADXL345.cpp + ADXL345.cpp + 0 + 0 + + + 5 + 28 + 8 + 0 + 0 + 0 + .\Lib\IMU\GY85.cpp + GY85.cpp + 0 + 0 + + + 5 + 29 + 8 + 0 + 0 + 0 + .\Lib\IMU\HMC5883L.cpp + HMC5883L.cpp + 0 + 0 + + + 5 + 30 + 8 + 0 + 0 + 0 + .\Lib\IMU\ITG3200.cpp + ITG3200.cpp + 0 + 0 + + + 5 + 31 + 8 + 0 + 0 + 0 + .\Lib\IMU\GY65.cpp + GY65.cpp + 0 + 0 + + + 5 + 32 + 8 + 0 + 0 + 0 + .\Lib\IMU\MPU6050.cpp + MPU6050.cpp + 0 + 0 + + + 5 + 33 + 8 + 0 + 0 + 0 + .\Lib\IMU\GY87.cpp + GY87.cpp + 0 + 0 + + + + + BSPLIB + 1 + 0 + 0 + 0 + + 6 + 34 + 1 + 0 + 0 + 0 + .\BSPLIB\delay.c + delay.c + 0 + 0 + + + 6 + 35 + 1 + 0 + 0 + 0 + .\BSPLIB\encoder.c + encoder.c + 0 + 0 + + + 6 + 36 + 1 + 0 + 0 + 0 + .\BSPLIB\flash.c + flash.c + 0 + 0 + + + 6 + 37 + 1 + 0 + 0 + 0 + .\BSPLIB\nvic.c + nvic.c + 0 + 0 + + + 6 + 38 + 1 + 0 + 0 + 0 + .\BSPLIB\pwm_out.c + pwm_out.c + 0 + 0 + + + 6 + 39 + 1 + 0 + 0 + 0 + .\BSPLIB\timer.c + timer.c + 0 + 0 + + + 6 + 40 + 1 + 0 + 0 + 0 + .\BSPLIB\usart.c + usart.c + 0 + 0 + + + 6 + 41 + 1 + 0 + 0 + 0 + .\BSPLIB\i2c.c + i2c.c + 0 + 0 + + + + + Config + 1 + 0 + 0 + 0 + + 7 + 42 + 5 + 0 + 0 + 0 + .\params.mk + params.mk + 0 + 0 + + + + + ::CMSIS + 0 + 0 + 0 + 1 + + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/pibot.uvprojx b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/pibot.uvprojx new file mode 100644 index 0000000..cfb0a8f --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/pibot.uvprojx @@ -0,0 +1,644 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + Target 1 + 0x4 + ARM-ADS + 5060300::V5.06 update 3 (build 300)::ARMCC + + + STM32F103C8 + STMicroelectronics + Keil.STM32F1xx_DFP.1.1.0 + http://www.keil.com/pack/ + IRAM(0x20000000,0x5000) IROM(0x08000000,0x10000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)) + 4235 + $$Device:STM32F103C8$Device\Include\stm32f10x.h + + + + + + + + + + $$Device:STM32F103C8$SVD\STM32F103xx.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\Output\ + pibot check + 1 + 0 + 1 + 1 + 1 + .\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + + DARMSTM.DLL + -pSTM32F103C8 + SARMCM3.DLL + + TARMSTM.DLL + -pSTM32F103C8 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + "" () + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x5000 + + + 1 + 0x8000000 + 0x10000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x10000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x5000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + --via .\params.mk + USE_STDPERIPH_DRIVER,STM32F10X_MD + + .\CMSIS;.\FWlib\inc;.\FWlib\src;.\User;.\Lib\Board;.\Lib\DataHolder;.\Lib\Encoder;.\Lib\KinematicModels;.\Lib\Motor;.\Lib\PID;.\Lib\Transport;.\BSPLIB;.\Lib\PS2;.\Lib\Joystick;.\Lib\IMU + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + + + + + + + + + + + + FWlib + + + misc.c + 1 + .\FWlib\src\misc.c + + + stm32f10x_exti.c + 1 + .\FWlib\src\stm32f10x_exti.c + + + stm32f10x_gpio.c + 1 + .\FWlib\src\stm32f10x_gpio.c + + + stm32f10x_i2c.c + 1 + .\FWlib\src\stm32f10x_i2c.c + + + stm32f10x_rcc.c + 1 + .\FWlib\src\stm32f10x_rcc.c + + + stm32f10x_tim.c + 1 + .\FWlib\src\stm32f10x_tim.c + + + stm32f10x_usart.c + 1 + .\FWlib\src\stm32f10x_usart.c + + + stm32f10x_dac.c + 1 + .\FWlib\src\stm32f10x_dac.c + + + stm32f10x_flash.c + 1 + .\FWlib\src\stm32f10x_flash.c + + + stm32f10x_pwr.c + 1 + .\FWlib\src\stm32f10x_pwr.c + + + stm32f10x_rtc.c + 1 + .\FWlib\src\stm32f10x_rtc.c + + + + + CMSIS + + + core_cm3.c + 1 + .\CMSIS\core_cm3.c + + + system_stm32f10x.c + 1 + .\CMSIS\system_stm32f10x.c + + + + + USER + + + main.cpp + 8 + .\User\main.cpp + + + robot.cpp + 8 + .\User\robot.cpp + + + stm32f10x_it.cpp + 8 + .\User\stm32f10x_it.cpp + + + + + STARTUP + + + startup_stm32f10x_md.s + 2 + .\CMSIS\startup\startup_stm32f10x_md.s + + + + + Lib + + + simple_dataframe_slave.cpp + 8 + .\Lib\Transport\simple_dataframe_slave.cpp + + + usart_transport.cpp + 8 + .\Lib\Transport\usart_transport.cpp + + + pid.cpp + 8 + .\Lib\PID\pid.cpp + + + common_motor_controller.cpp + 8 + .\Lib\Motor\common_motor_controller.cpp + + + encoder_implement.cpp + 8 + .\Lib\Encoder\encoder_implement.cpp + + + data_holder.cpp + 8 + .\Lib\DataHolder\data_holder.cpp + + + board_stm32.cpp + 8 + .\Lib\Board\board_stm32.cpp + + + joystick.cpp + 8 + .\Lib\Joystick\joystick.cpp + + + pstwo.cpp + 8 + .\Lib\PS2\pstwo.cpp + + + ADXL345.cpp + 8 + .\Lib\IMU\ADXL345.cpp + + + GY85.cpp + 8 + .\Lib\IMU\GY85.cpp + + + HMC5883L.cpp + 8 + .\Lib\IMU\HMC5883L.cpp + + + ITG3200.cpp + 8 + .\Lib\IMU\ITG3200.cpp + + + GY65.cpp + 8 + .\Lib\IMU\GY65.cpp + + + MPU6050.cpp + 8 + .\Lib\IMU\MPU6050.cpp + + + GY87.cpp + 8 + .\Lib\IMU\GY87.cpp + + + + + BSPLIB + + + delay.c + 1 + .\BSPLIB\delay.c + + + encoder.c + 1 + .\BSPLIB\encoder.c + + + flash.c + 1 + .\BSPLIB\flash.c + + + nvic.c + 1 + .\BSPLIB\nvic.c + + + pwm_out.c + 1 + .\BSPLIB\pwm_out.c + + + timer.c + 1 + .\BSPLIB\timer.c + + + usart.c + 1 + .\BSPLIB\usart.c + + + i2c.c + 1 + .\BSPLIB\i2c.c + + + + + Config + + + params.mk + 5 + .\params.mk + + + + + ::CMSIS + + + + + + + + + + + + + + + + + + + diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/STM32/startup_stm32f10x_hd.lst b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/startup_stm32f10x_hd.lst new file mode 100644 index 0000000..95024a0 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/STM32/startup_stm32f10x_hd.lst @@ -0,0 +1,1433 @@ + + + +ARM Macro Assembler Page 1 + + + 1 00000000 ;******************** (C) COPYRIGHT 2011 STMicroelectron + ics ******************** + 2 00000000 ;* File Name : startup_stm32f10x_hd.s + 3 00000000 ;* Author : MCD Application Team + 4 00000000 ;* Version : V3.5.0 + 5 00000000 ;* Date : 11-March-2011 + 6 00000000 ;* Description : STM32F10x High Density Devices v + ector table for MDK-ARM + 7 00000000 ;* toolchain. + 8 00000000 ;* This module performs: + 9 00000000 ;* - Set the initial SP + 10 00000000 ;* - Set the initial PC == Reset_Ha + ndler + 11 00000000 ;* - Set the vector table entries w + ith the exceptions ISR address + 12 00000000 ;* - Configure the clock system and + also configure the external + 13 00000000 ;* SRAM mounted on STM3210E-EVAL + board to be used as data + 14 00000000 ;* memory (optional, to be enable + d by user) + 15 00000000 ;* - Branches to __main in the C li + brary (which eventually + 16 00000000 ;* calls main()). + 17 00000000 ;* After Reset the CortexM3 process + or is in Thread mode, + 18 00000000 ;* priority is Privileged, and the + Stack is set to Main. + 19 00000000 ;* <<< Use Configuration Wizard in Context Menu >>> + 20 00000000 ;******************************************************* + ************************ + 21 00000000 ; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS A + T PROVIDING CUSTOMERS + 22 00000000 ; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN OR + DER FOR THEM TO SAVE TIME. + 23 00000000 ; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIAB + LE FOR ANY DIRECT, + 24 00000000 ; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY + CLAIMS ARISING FROM THE + 25 00000000 ; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOM + ERS OF THE CODING + 26 00000000 ; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR + PRODUCTS. + 27 00000000 ;******************************************************* + ************************ + 28 00000000 + 29 00000000 ; Amount of memory (in bytes) allocated for Stack + 30 00000000 ; Tailor this value to your application needs + 31 00000000 ; Stack Configuration + 32 00000000 ; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> + 33 00000000 ; + 34 00000000 + 35 00000000 00000400 + Stack_Size + EQU 0x00000400 + 36 00000000 + 37 00000000 AREA STACK, NOINIT, READWRITE, ALIGN +=3 + 38 00000000 Stack_Mem + + + +ARM Macro Assembler Page 2 + + + SPACE Stack_Size + 39 00000400 __initial_sp + 40 00000400 + 41 00000400 ; Heap Configuration + 42 00000400 ; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> + 43 00000400 ; + 44 00000400 + 45 00000400 00000200 + Heap_Size + EQU 0x00000200 + 46 00000400 + 47 00000400 AREA HEAP, NOINIT, READWRITE, ALIGN= +3 + 48 00000000 __heap_base + 49 00000000 Heap_Mem + SPACE Heap_Size + 50 00000200 __heap_limit + 51 00000200 + 52 00000200 PRESERVE8 + 53 00000200 THUMB + 54 00000200 + 55 00000200 + 56 00000200 ; Vector Table Mapped to Address 0 at Reset + 57 00000200 AREA RESET, DATA, READONLY + 58 00000000 EXPORT __Vectors + 59 00000000 EXPORT __Vectors_End + 60 00000000 EXPORT __Vectors_Size + 61 00000000 + 62 00000000 00000000 + __Vectors + DCD __initial_sp ; Top of Stack + 63 00000004 00000000 DCD Reset_Handler ; Reset Handler + 64 00000008 00000000 DCD NMI_Handler ; NMI Handler + 65 0000000C 00000000 DCD HardFault_Handler ; Hard Fault + Handler + 66 00000010 00000000 DCD MemManage_Handler + ; MPU Fault Handler + + 67 00000014 00000000 DCD BusFault_Handler + ; Bus Fault Handler + + 68 00000018 00000000 DCD UsageFault_Handler ; Usage Faul + t Handler + 69 0000001C 00000000 DCD 0 ; Reserved + 70 00000020 00000000 DCD 0 ; Reserved + 71 00000024 00000000 DCD 0 ; Reserved + 72 00000028 00000000 DCD 0 ; Reserved + 73 0000002C 00000000 DCD SVC_Handler ; SVCall Handler + 74 00000030 00000000 DCD DebugMon_Handler ; Debug Monito + r Handler + 75 00000034 00000000 DCD 0 ; Reserved + 76 00000038 00000000 DCD PendSV_Handler ; PendSV Handler + + 77 0000003C 00000000 DCD SysTick_Handler + ; SysTick Handler + 78 00000040 + 79 00000040 ; External Interrupts + 80 00000040 00000000 DCD WWDG_IRQHandler + ; Window Watchdog + + + +ARM Macro Assembler Page 3 + + + 81 00000044 00000000 DCD PVD_IRQHandler ; PVD through EX + TI Line detect + 82 00000048 00000000 DCD TAMPER_IRQHandler ; Tamper + 83 0000004C 00000000 DCD RTC_IRQHandler ; RTC + 84 00000050 00000000 DCD FLASH_IRQHandler ; Flash + 85 00000054 00000000 DCD RCC_IRQHandler ; RCC + 86 00000058 00000000 DCD EXTI0_IRQHandler ; EXTI Line 0 + 87 0000005C 00000000 DCD EXTI1_IRQHandler ; EXTI Line 1 + 88 00000060 00000000 DCD EXTI2_IRQHandler ; EXTI Line 2 + 89 00000064 00000000 DCD EXTI3_IRQHandler ; EXTI Line 3 + 90 00000068 00000000 DCD EXTI4_IRQHandler ; EXTI Line 4 + 91 0000006C 00000000 DCD DMA1_Channel1_IRQHandler + ; DMA1 Channel 1 + 92 00000070 00000000 DCD DMA1_Channel2_IRQHandler + ; DMA1 Channel 2 + 93 00000074 00000000 DCD DMA1_Channel3_IRQHandler + ; DMA1 Channel 3 + 94 00000078 00000000 DCD DMA1_Channel4_IRQHandler + ; DMA1 Channel 4 + 95 0000007C 00000000 DCD DMA1_Channel5_IRQHandler + ; DMA1 Channel 5 + 96 00000080 00000000 DCD DMA1_Channel6_IRQHandler + ; DMA1 Channel 6 + 97 00000084 00000000 DCD DMA1_Channel7_IRQHandler + ; DMA1 Channel 7 + 98 00000088 00000000 DCD ADC1_2_IRQHandler ; ADC1 & ADC2 + + 99 0000008C 00000000 DCD USB_HP_CAN1_TX_IRQHandler ; USB + High Priority or C + AN1 TX + 100 00000090 00000000 DCD USB_LP_CAN1_RX0_IRQHandler ; US + B Low Priority or + CAN1 RX0 + 101 00000094 00000000 DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + 102 00000098 00000000 DCD CAN1_SCE_IRQHandler ; CAN1 SCE + 103 0000009C 00000000 DCD EXTI9_5_IRQHandler + ; EXTI Line 9..5 + 104 000000A0 00000000 DCD TIM1_BRK_IRQHandler + ; TIM1 Break + 105 000000A4 00000000 DCD TIM1_UP_IRQHandler + ; TIM1 Update + 106 000000A8 00000000 DCD TIM1_TRG_COM_IRQHandler ; TIM1 + Trigger and Commuta + tion + 107 000000AC 00000000 DCD TIM1_CC_IRQHandler ; TIM1 Captu + re Compare + 108 000000B0 00000000 DCD TIM2_IRQHandler ; TIM2 + 109 000000B4 00000000 DCD TIM3_IRQHandler ; TIM3 + 110 000000B8 00000000 DCD TIM4_IRQHandler ; TIM4 + 111 000000BC 00000000 DCD I2C1_EV_IRQHandler ; I2C1 Event + + 112 000000C0 00000000 DCD I2C1_ER_IRQHandler ; I2C1 Error + + 113 000000C4 00000000 DCD I2C2_EV_IRQHandler ; I2C2 Event + + 114 000000C8 00000000 DCD I2C2_ER_IRQHandler ; I2C2 Error + + 115 000000CC 00000000 DCD SPI1_IRQHandler ; SPI1 + 116 000000D0 00000000 DCD SPI2_IRQHandler ; SPI2 + + + +ARM Macro Assembler Page 4 + + + 117 000000D4 00000000 DCD USART1_IRQHandler ; USART1 + 118 000000D8 00000000 DCD USART2_IRQHandler ; USART2 + 119 000000DC 00000000 DCD USART3_IRQHandler ; USART3 + 120 000000E0 00000000 DCD EXTI15_10_IRQHandler + ; EXTI Line 15..10 + 121 000000E4 00000000 DCD RTCAlarm_IRQHandler ; RTC Alarm + through EXTI Line + 122 000000E8 00000000 DCD USBWakeUp_IRQHandler ; USB Wake + up from suspend + 123 000000EC 00000000 DCD TIM8_BRK_IRQHandler + ; TIM8 Break + 124 000000F0 00000000 DCD TIM8_UP_IRQHandler + ; TIM8 Update + 125 000000F4 00000000 DCD TIM8_TRG_COM_IRQHandler ; TIM8 + Trigger and Commuta + tion + 126 000000F8 00000000 DCD TIM8_CC_IRQHandler ; TIM8 Captu + re Compare + 127 000000FC 00000000 DCD ADC3_IRQHandler ; ADC3 + 128 00000100 00000000 DCD FSMC_IRQHandler ; FSMC + 129 00000104 00000000 DCD SDIO_IRQHandler ; SDIO + 130 00000108 00000000 DCD TIM5_IRQHandler ; TIM5 + 131 0000010C 00000000 DCD SPI3_IRQHandler ; SPI3 + 132 00000110 00000000 DCD UART4_IRQHandler ; UART4 + 133 00000114 00000000 DCD UART5_IRQHandler ; UART5 + 134 00000118 00000000 DCD TIM6_IRQHandler ; TIM6 + 135 0000011C 00000000 DCD TIM7_IRQHandler ; TIM7 + 136 00000120 00000000 DCD DMA2_Channel1_IRQHandler + ; DMA2 Channel1 + 137 00000124 00000000 DCD DMA2_Channel2_IRQHandler + ; DMA2 Channel2 + 138 00000128 00000000 DCD DMA2_Channel3_IRQHandler + ; DMA2 Channel3 + 139 0000012C 00000000 DCD DMA2_Channel4_5_IRQHandler ; DM + A2 Channel4 & Chann + el5 + 140 00000130 __Vectors_End + 141 00000130 + 142 00000130 00000130 + __Vectors_Size + EQU __Vectors_End - __Vectors + 143 00000130 + 144 00000130 AREA |.text|, CODE, READONLY + 145 00000000 + 146 00000000 ; Reset handler + 147 00000000 Reset_Handler + PROC + 148 00000000 EXPORT Reset_Handler [WEAK +] + 149 00000000 IMPORT __main + 150 00000000 IMPORT SystemInit + 151 00000000 4806 LDR R0, =SystemInit + 152 00000002 4780 BLX R0 + 153 00000004 4806 LDR R0, =__main + 154 00000006 4700 BX R0 + 155 00000008 ENDP + 156 00000008 + 157 00000008 ; Dummy Exception Handlers (infinite loops which can be + modified) + + + +ARM Macro Assembler Page 5 + + + 158 00000008 + 159 00000008 NMI_Handler + PROC + 160 00000008 EXPORT NMI_Handler [WEA +K] + 161 00000008 E7FE B . + 162 0000000A ENDP + 164 0000000A HardFault_Handler + PROC + 165 0000000A EXPORT HardFault_Handler [WEA +K] + 166 0000000A E7FE B . + 167 0000000C ENDP + 169 0000000C MemManage_Handler + PROC + 170 0000000C EXPORT MemManage_Handler [WEA +K] + 171 0000000C E7FE B . + 172 0000000E ENDP + 174 0000000E BusFault_Handler + PROC + 175 0000000E EXPORT BusFault_Handler [WEA +K] + 176 0000000E E7FE B . + 177 00000010 ENDP + 179 00000010 UsageFault_Handler + PROC + 180 00000010 EXPORT UsageFault_Handler [WEA +K] + 181 00000010 E7FE B . + 182 00000012 ENDP + 183 00000012 SVC_Handler + PROC + 184 00000012 EXPORT SVC_Handler [WEA +K] + 185 00000012 E7FE B . + 186 00000014 ENDP + 188 00000014 DebugMon_Handler + PROC + 189 00000014 EXPORT DebugMon_Handler [WEA +K] + 190 00000014 E7FE B . + 191 00000016 ENDP + 192 00000016 PendSV_Handler + PROC + 193 00000016 EXPORT PendSV_Handler [WEA +K] + 194 00000016 E7FE B . + 195 00000018 ENDP + 196 00000018 SysTick_Handler + PROC + 197 00000018 EXPORT SysTick_Handler [WEA +K] + 198 00000018 E7FE B . + 199 0000001A ENDP + 200 0000001A + 201 0000001A Default_Handler + PROC + 202 0000001A + + + +ARM Macro Assembler Page 6 + + + 203 0000001A EXPORT WWDG_IRQHandler [WEA +K] + 204 0000001A EXPORT PVD_IRQHandler [WEA +K] + 205 0000001A EXPORT TAMPER_IRQHandler [WEA +K] + 206 0000001A EXPORT RTC_IRQHandler [WEA +K] + 207 0000001A EXPORT FLASH_IRQHandler [WEA +K] + 208 0000001A EXPORT RCC_IRQHandler [WEA +K] + 209 0000001A EXPORT EXTI0_IRQHandler [WEA +K] + 210 0000001A EXPORT EXTI1_IRQHandler [WEA +K] + 211 0000001A EXPORT EXTI2_IRQHandler [WEA +K] + 212 0000001A EXPORT EXTI3_IRQHandler [WEA +K] + 213 0000001A EXPORT EXTI4_IRQHandler [WEA +K] + 214 0000001A EXPORT DMA1_Channel1_IRQHandler [WEA +K] + 215 0000001A EXPORT DMA1_Channel2_IRQHandler [WEA +K] + 216 0000001A EXPORT DMA1_Channel3_IRQHandler [WEA +K] + 217 0000001A EXPORT DMA1_Channel4_IRQHandler [WEA +K] + 218 0000001A EXPORT DMA1_Channel5_IRQHandler [WEA +K] + 219 0000001A EXPORT DMA1_Channel6_IRQHandler [WEA +K] + 220 0000001A EXPORT DMA1_Channel7_IRQHandler [WEA +K] + 221 0000001A EXPORT ADC1_2_IRQHandler [WEA +K] + 222 0000001A EXPORT USB_HP_CAN1_TX_IRQHandler [WEA +K] + 223 0000001A EXPORT USB_LP_CAN1_RX0_IRQHandler [WEA +K] + 224 0000001A EXPORT CAN1_RX1_IRQHandler [WEA +K] + 225 0000001A EXPORT CAN1_SCE_IRQHandler [WEA +K] + 226 0000001A EXPORT EXTI9_5_IRQHandler [WEA +K] + 227 0000001A EXPORT TIM1_BRK_IRQHandler [WEA +K] + 228 0000001A EXPORT TIM1_UP_IRQHandler [WEA +K] + 229 0000001A EXPORT TIM1_TRG_COM_IRQHandler [WEA +K] + 230 0000001A EXPORT TIM1_CC_IRQHandler [WEA +K] + 231 0000001A EXPORT TIM2_IRQHandler [WEA +K] + 232 0000001A EXPORT TIM3_IRQHandler [WEA + + + +ARM Macro Assembler Page 7 + + +K] + 233 0000001A EXPORT TIM4_IRQHandler [WEA +K] + 234 0000001A EXPORT I2C1_EV_IRQHandler [WEA +K] + 235 0000001A EXPORT I2C1_ER_IRQHandler [WEA +K] + 236 0000001A EXPORT I2C2_EV_IRQHandler [WEA +K] + 237 0000001A EXPORT I2C2_ER_IRQHandler [WEA +K] + 238 0000001A EXPORT SPI1_IRQHandler [WEA +K] + 239 0000001A EXPORT SPI2_IRQHandler [WEA +K] + 240 0000001A EXPORT USART1_IRQHandler [WEA +K] + 241 0000001A EXPORT USART2_IRQHandler [WEA +K] + 242 0000001A EXPORT USART3_IRQHandler [WEA +K] + 243 0000001A EXPORT EXTI15_10_IRQHandler [WEA +K] + 244 0000001A EXPORT RTCAlarm_IRQHandler [WEA +K] + 245 0000001A EXPORT USBWakeUp_IRQHandler [WEA +K] + 246 0000001A EXPORT TIM8_BRK_IRQHandler [WEA +K] + 247 0000001A EXPORT TIM8_UP_IRQHandler [WEA +K] + 248 0000001A EXPORT TIM8_TRG_COM_IRQHandler [WEA +K] + 249 0000001A EXPORT TIM8_CC_IRQHandler [WEA +K] + 250 0000001A EXPORT ADC3_IRQHandler [WEA +K] + 251 0000001A EXPORT FSMC_IRQHandler [WEA +K] + 252 0000001A EXPORT SDIO_IRQHandler [WEA +K] + 253 0000001A EXPORT TIM5_IRQHandler [WEA +K] + 254 0000001A EXPORT SPI3_IRQHandler [WEA +K] + 255 0000001A EXPORT UART4_IRQHandler [WEA +K] + 256 0000001A EXPORT UART5_IRQHandler [WEA +K] + 257 0000001A EXPORT TIM6_IRQHandler [WEA +K] + 258 0000001A EXPORT TIM7_IRQHandler [WEA +K] + 259 0000001A EXPORT DMA2_Channel1_IRQHandler [WEA +K] + 260 0000001A EXPORT DMA2_Channel2_IRQHandler [WEA +K] + 261 0000001A EXPORT DMA2_Channel3_IRQHandler [WEA +K] + + + +ARM Macro Assembler Page 8 + + + 262 0000001A EXPORT DMA2_Channel4_5_IRQHandler [WEA +K] + 263 0000001A + 264 0000001A WWDG_IRQHandler + 265 0000001A PVD_IRQHandler + 266 0000001A TAMPER_IRQHandler + 267 0000001A RTC_IRQHandler + 268 0000001A FLASH_IRQHandler + 269 0000001A RCC_IRQHandler + 270 0000001A EXTI0_IRQHandler + 271 0000001A EXTI1_IRQHandler + 272 0000001A EXTI2_IRQHandler + 273 0000001A EXTI3_IRQHandler + 274 0000001A EXTI4_IRQHandler + 275 0000001A DMA1_Channel1_IRQHandler + 276 0000001A DMA1_Channel2_IRQHandler + 277 0000001A DMA1_Channel3_IRQHandler + 278 0000001A DMA1_Channel4_IRQHandler + 279 0000001A DMA1_Channel5_IRQHandler + 280 0000001A DMA1_Channel6_IRQHandler + 281 0000001A DMA1_Channel7_IRQHandler + 282 0000001A ADC1_2_IRQHandler + 283 0000001A USB_HP_CAN1_TX_IRQHandler + 284 0000001A USB_LP_CAN1_RX0_IRQHandler + 285 0000001A CAN1_RX1_IRQHandler + 286 0000001A CAN1_SCE_IRQHandler + 287 0000001A EXTI9_5_IRQHandler + 288 0000001A TIM1_BRK_IRQHandler + 289 0000001A TIM1_UP_IRQHandler + 290 0000001A TIM1_TRG_COM_IRQHandler + 291 0000001A TIM1_CC_IRQHandler + 292 0000001A TIM2_IRQHandler + 293 0000001A TIM3_IRQHandler + 294 0000001A TIM4_IRQHandler + 295 0000001A I2C1_EV_IRQHandler + 296 0000001A I2C1_ER_IRQHandler + 297 0000001A I2C2_EV_IRQHandler + 298 0000001A I2C2_ER_IRQHandler + 299 0000001A SPI1_IRQHandler + 300 0000001A SPI2_IRQHandler + 301 0000001A USART1_IRQHandler + 302 0000001A USART2_IRQHandler + 303 0000001A USART3_IRQHandler + 304 0000001A EXTI15_10_IRQHandler + 305 0000001A RTCAlarm_IRQHandler + 306 0000001A USBWakeUp_IRQHandler + 307 0000001A TIM8_BRK_IRQHandler + 308 0000001A TIM8_UP_IRQHandler + 309 0000001A TIM8_TRG_COM_IRQHandler + 310 0000001A TIM8_CC_IRQHandler + 311 0000001A ADC3_IRQHandler + 312 0000001A FSMC_IRQHandler + 313 0000001A SDIO_IRQHandler + 314 0000001A TIM5_IRQHandler + 315 0000001A SPI3_IRQHandler + 316 0000001A UART4_IRQHandler + 317 0000001A UART5_IRQHandler + 318 0000001A TIM6_IRQHandler + 319 0000001A TIM7_IRQHandler + + + +ARM Macro Assembler Page 9 + + + 320 0000001A DMA2_Channel1_IRQHandler + 321 0000001A DMA2_Channel2_IRQHandler + 322 0000001A DMA2_Channel3_IRQHandler + 323 0000001A DMA2_Channel4_5_IRQHandler + 324 0000001A E7FE B . + 325 0000001C + 326 0000001C ENDP + 327 0000001C + 328 0000001C ALIGN + 329 0000001C + 330 0000001C ;******************************************************* + ************************ + 331 0000001C ; User Stack and Heap initialization + 332 0000001C ;******************************************************* + ************************ + 333 0000001C IF :DEF:__MICROLIB + 334 0000001C + 335 0000001C EXPORT __initial_sp + 336 0000001C EXPORT __heap_base + 337 0000001C EXPORT __heap_limit + 338 0000001C + 339 0000001C ELSE + 354 ENDIF + 355 0000001C + 356 0000001C END + 00000000 + 00000000 +Command Line: --debug --xref --diag_suppress=9931 --cpu=Cortex-M3 --apcs=interw +ork --depend=.\output\startup_stm32f10x_hd.d -o.\output\startup_stm32f10x_hd.o +-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\Gebot_Firmware v1. +0\STM32\RTE" -I"D:\Program Files\Keilv5\ARM\PACK\ARM\CMSIS\4.5.0\CMSIS\Include" + -I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include" - +-predefine="__MICROLIB SETA 1" --predefine="__UVISION_VERSION SETA 521" --prede +fine="_RTE_ SETA 1" --predefine="STM32F10X_HD SETA 1" --list=.\startup_stm32f10 +x_hd.lst CMSIS\startup\startup_stm32f10x_hd.s + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +STACK 00000000 + +Symbol: STACK + Definitions + At line 37 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: STACK unused +Stack_Mem 00000000 + +Symbol: Stack_Mem + Definitions + At line 38 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: Stack_Mem unused +__initial_sp 00000400 + +Symbol: __initial_sp + Definitions + At line 39 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 62 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 335 in file CMSIS\startup\startup_stm32f10x_hd.s + +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +HEAP 00000000 + +Symbol: HEAP + Definitions + At line 47 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: HEAP unused +Heap_Mem 00000000 + +Symbol: Heap_Mem + Definitions + At line 49 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: Heap_Mem unused +__heap_base 00000000 + +Symbol: __heap_base + Definitions + At line 48 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 336 in file CMSIS\startup\startup_stm32f10x_hd.s +Comment: __heap_base used once +__heap_limit 00000200 + +Symbol: __heap_limit + Definitions + At line 50 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 337 in file CMSIS\startup\startup_stm32f10x_hd.s +Comment: __heap_limit used once +4 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +RESET 00000000 + +Symbol: RESET + Definitions + At line 57 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: RESET unused +__Vectors 00000000 + +Symbol: __Vectors + Definitions + At line 62 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 58 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 142 in file CMSIS\startup\startup_stm32f10x_hd.s + +__Vectors_End 00000130 + +Symbol: __Vectors_End + Definitions + At line 140 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 59 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 142 in file CMSIS\startup\startup_stm32f10x_hd.s + +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +.text 00000000 + +Symbol: .text + Definitions + At line 144 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: .text unused +ADC1_2_IRQHandler 0000001A + +Symbol: ADC1_2_IRQHandler + Definitions + At line 282 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 98 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 221 in file CMSIS\startup\startup_stm32f10x_hd.s + +ADC3_IRQHandler 0000001A + +Symbol: ADC3_IRQHandler + Definitions + At line 311 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 127 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 250 in file CMSIS\startup\startup_stm32f10x_hd.s + +BusFault_Handler 0000000E + +Symbol: BusFault_Handler + Definitions + At line 174 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 67 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 175 in file CMSIS\startup\startup_stm32f10x_hd.s + +CAN1_RX1_IRQHandler 0000001A + +Symbol: CAN1_RX1_IRQHandler + Definitions + At line 285 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 101 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 224 in file CMSIS\startup\startup_stm32f10x_hd.s + +CAN1_SCE_IRQHandler 0000001A + +Symbol: CAN1_SCE_IRQHandler + Definitions + At line 286 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 102 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 225 in file CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel1_IRQHandler 0000001A + +Symbol: DMA1_Channel1_IRQHandler + Definitions + At line 275 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + + + +ARM Macro Assembler Page 2 Alphabetic symbol ordering +Relocatable symbols + + At line 91 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 214 in file CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel2_IRQHandler 0000001A + +Symbol: DMA1_Channel2_IRQHandler + Definitions + At line 276 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 92 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 215 in file CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel3_IRQHandler 0000001A + +Symbol: DMA1_Channel3_IRQHandler + Definitions + At line 277 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 93 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 216 in file CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel4_IRQHandler 0000001A + +Symbol: DMA1_Channel4_IRQHandler + Definitions + At line 278 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 94 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 217 in file CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel5_IRQHandler 0000001A + +Symbol: DMA1_Channel5_IRQHandler + Definitions + At line 279 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 95 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 218 in file CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel6_IRQHandler 0000001A + +Symbol: DMA1_Channel6_IRQHandler + Definitions + At line 280 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 96 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 219 in file CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel7_IRQHandler 0000001A + +Symbol: DMA1_Channel7_IRQHandler + Definitions + At line 281 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 97 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 220 in file CMSIS\startup\startup_stm32f10x_hd.s + +DMA2_Channel1_IRQHandler 0000001A + + + + +ARM Macro Assembler Page 3 Alphabetic symbol ordering +Relocatable symbols + +Symbol: DMA2_Channel1_IRQHandler + Definitions + At line 320 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 136 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 259 in file CMSIS\startup\startup_stm32f10x_hd.s + +DMA2_Channel2_IRQHandler 0000001A + +Symbol: DMA2_Channel2_IRQHandler + Definitions + At line 321 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 137 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 260 in file CMSIS\startup\startup_stm32f10x_hd.s + +DMA2_Channel3_IRQHandler 0000001A + +Symbol: DMA2_Channel3_IRQHandler + Definitions + At line 322 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 138 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 261 in file CMSIS\startup\startup_stm32f10x_hd.s + +DMA2_Channel4_5_IRQHandler 0000001A + +Symbol: DMA2_Channel4_5_IRQHandler + Definitions + At line 323 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 139 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 262 in file CMSIS\startup\startup_stm32f10x_hd.s + +DebugMon_Handler 00000014 + +Symbol: DebugMon_Handler + Definitions + At line 188 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 74 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 189 in file CMSIS\startup\startup_stm32f10x_hd.s + +Default_Handler 0000001A + +Symbol: Default_Handler + Definitions + At line 201 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: Default_Handler unused +EXTI0_IRQHandler 0000001A + +Symbol: EXTI0_IRQHandler + Definitions + At line 270 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 86 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 209 in file CMSIS\startup\startup_stm32f10x_hd.s + + + +ARM Macro Assembler Page 4 Alphabetic symbol ordering +Relocatable symbols + + +EXTI15_10_IRQHandler 0000001A + +Symbol: EXTI15_10_IRQHandler + Definitions + At line 304 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 120 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 243 in file CMSIS\startup\startup_stm32f10x_hd.s + +EXTI1_IRQHandler 0000001A + +Symbol: EXTI1_IRQHandler + Definitions + At line 271 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 87 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 210 in file CMSIS\startup\startup_stm32f10x_hd.s + +EXTI2_IRQHandler 0000001A + +Symbol: EXTI2_IRQHandler + Definitions + At line 272 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 88 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 211 in file CMSIS\startup\startup_stm32f10x_hd.s + +EXTI3_IRQHandler 0000001A + +Symbol: EXTI3_IRQHandler + Definitions + At line 273 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 89 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 212 in file CMSIS\startup\startup_stm32f10x_hd.s + +EXTI4_IRQHandler 0000001A + +Symbol: EXTI4_IRQHandler + Definitions + At line 274 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 90 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 213 in file CMSIS\startup\startup_stm32f10x_hd.s + +EXTI9_5_IRQHandler 0000001A + +Symbol: EXTI9_5_IRQHandler + Definitions + At line 287 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 103 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 226 in file CMSIS\startup\startup_stm32f10x_hd.s + +FLASH_IRQHandler 0000001A + +Symbol: FLASH_IRQHandler + Definitions + + + +ARM Macro Assembler Page 5 Alphabetic symbol ordering +Relocatable symbols + + At line 268 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 84 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 207 in file CMSIS\startup\startup_stm32f10x_hd.s + +FSMC_IRQHandler 0000001A + +Symbol: FSMC_IRQHandler + Definitions + At line 312 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 128 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 251 in file CMSIS\startup\startup_stm32f10x_hd.s + +HardFault_Handler 0000000A + +Symbol: HardFault_Handler + Definitions + At line 164 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 65 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 165 in file CMSIS\startup\startup_stm32f10x_hd.s + +I2C1_ER_IRQHandler 0000001A + +Symbol: I2C1_ER_IRQHandler + Definitions + At line 296 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 112 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 235 in file CMSIS\startup\startup_stm32f10x_hd.s + +I2C1_EV_IRQHandler 0000001A + +Symbol: I2C1_EV_IRQHandler + Definitions + At line 295 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 111 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 234 in file CMSIS\startup\startup_stm32f10x_hd.s + +I2C2_ER_IRQHandler 0000001A + +Symbol: I2C2_ER_IRQHandler + Definitions + At line 298 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 114 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 237 in file CMSIS\startup\startup_stm32f10x_hd.s + +I2C2_EV_IRQHandler 0000001A + +Symbol: I2C2_EV_IRQHandler + Definitions + At line 297 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 113 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 236 in file CMSIS\startup\startup_stm32f10x_hd.s + + + + +ARM Macro Assembler Page 6 Alphabetic symbol ordering +Relocatable symbols + +MemManage_Handler 0000000C + +Symbol: MemManage_Handler + Definitions + At line 169 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 66 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 170 in file CMSIS\startup\startup_stm32f10x_hd.s + +NMI_Handler 00000008 + +Symbol: NMI_Handler + Definitions + At line 159 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 64 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 160 in file CMSIS\startup\startup_stm32f10x_hd.s + +PVD_IRQHandler 0000001A + +Symbol: PVD_IRQHandler + Definitions + At line 265 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 81 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 204 in file CMSIS\startup\startup_stm32f10x_hd.s + +PendSV_Handler 00000016 + +Symbol: PendSV_Handler + Definitions + At line 192 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 76 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 193 in file CMSIS\startup\startup_stm32f10x_hd.s + +RCC_IRQHandler 0000001A + +Symbol: RCC_IRQHandler + Definitions + At line 269 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 85 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 208 in file CMSIS\startup\startup_stm32f10x_hd.s + +RTCAlarm_IRQHandler 0000001A + +Symbol: RTCAlarm_IRQHandler + Definitions + At line 305 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 121 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 244 in file CMSIS\startup\startup_stm32f10x_hd.s + +RTC_IRQHandler 0000001A + +Symbol: RTC_IRQHandler + Definitions + At line 267 in file CMSIS\startup\startup_stm32f10x_hd.s + + + +ARM Macro Assembler Page 7 Alphabetic symbol ordering +Relocatable symbols + + Uses + At line 83 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 206 in file CMSIS\startup\startup_stm32f10x_hd.s + +Reset_Handler 00000000 + +Symbol: Reset_Handler + Definitions + At line 147 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 63 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 148 in file CMSIS\startup\startup_stm32f10x_hd.s + +SDIO_IRQHandler 0000001A + +Symbol: SDIO_IRQHandler + Definitions + At line 313 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 129 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 252 in file CMSIS\startup\startup_stm32f10x_hd.s + +SPI1_IRQHandler 0000001A + +Symbol: SPI1_IRQHandler + Definitions + At line 299 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 115 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 238 in file CMSIS\startup\startup_stm32f10x_hd.s + +SPI2_IRQHandler 0000001A + +Symbol: SPI2_IRQHandler + Definitions + At line 300 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 116 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 239 in file CMSIS\startup\startup_stm32f10x_hd.s + +SPI3_IRQHandler 0000001A + +Symbol: SPI3_IRQHandler + Definitions + At line 315 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 131 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 254 in file CMSIS\startup\startup_stm32f10x_hd.s + +SVC_Handler 00000012 + +Symbol: SVC_Handler + Definitions + At line 183 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 73 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 184 in file CMSIS\startup\startup_stm32f10x_hd.s + +SysTick_Handler 00000018 + + + +ARM Macro Assembler Page 8 Alphabetic symbol ordering +Relocatable symbols + + +Symbol: SysTick_Handler + Definitions + At line 196 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 77 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 197 in file CMSIS\startup\startup_stm32f10x_hd.s + +TAMPER_IRQHandler 0000001A + +Symbol: TAMPER_IRQHandler + Definitions + At line 266 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 82 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 205 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM1_BRK_IRQHandler 0000001A + +Symbol: TIM1_BRK_IRQHandler + Definitions + At line 288 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 104 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 227 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM1_CC_IRQHandler 0000001A + +Symbol: TIM1_CC_IRQHandler + Definitions + At line 291 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 107 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 230 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM1_TRG_COM_IRQHandler 0000001A + +Symbol: TIM1_TRG_COM_IRQHandler + Definitions + At line 290 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 106 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 229 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM1_UP_IRQHandler 0000001A + +Symbol: TIM1_UP_IRQHandler + Definitions + At line 289 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 105 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 228 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM2_IRQHandler 0000001A + +Symbol: TIM2_IRQHandler + Definitions + At line 292 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + + + +ARM Macro Assembler Page 9 Alphabetic symbol ordering +Relocatable symbols + + At line 108 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 231 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM3_IRQHandler 0000001A + +Symbol: TIM3_IRQHandler + Definitions + At line 293 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 109 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 232 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM4_IRQHandler 0000001A + +Symbol: TIM4_IRQHandler + Definitions + At line 294 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 110 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 233 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM5_IRQHandler 0000001A + +Symbol: TIM5_IRQHandler + Definitions + At line 314 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 130 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 253 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM6_IRQHandler 0000001A + +Symbol: TIM6_IRQHandler + Definitions + At line 318 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 134 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 257 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM7_IRQHandler 0000001A + +Symbol: TIM7_IRQHandler + Definitions + At line 319 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 135 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 258 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM8_BRK_IRQHandler 0000001A + +Symbol: TIM8_BRK_IRQHandler + Definitions + At line 307 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 123 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 246 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM8_CC_IRQHandler 0000001A + + + + +ARM Macro Assembler Page 10 Alphabetic symbol ordering +Relocatable symbols + +Symbol: TIM8_CC_IRQHandler + Definitions + At line 310 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 126 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 249 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM8_TRG_COM_IRQHandler 0000001A + +Symbol: TIM8_TRG_COM_IRQHandler + Definitions + At line 309 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 125 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 248 in file CMSIS\startup\startup_stm32f10x_hd.s + +TIM8_UP_IRQHandler 0000001A + +Symbol: TIM8_UP_IRQHandler + Definitions + At line 308 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 124 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 247 in file CMSIS\startup\startup_stm32f10x_hd.s + +UART4_IRQHandler 0000001A + +Symbol: UART4_IRQHandler + Definitions + At line 316 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 132 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 255 in file CMSIS\startup\startup_stm32f10x_hd.s + +UART5_IRQHandler 0000001A + +Symbol: UART5_IRQHandler + Definitions + At line 317 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 133 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 256 in file CMSIS\startup\startup_stm32f10x_hd.s + +USART1_IRQHandler 0000001A + +Symbol: USART1_IRQHandler + Definitions + At line 301 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 117 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 240 in file CMSIS\startup\startup_stm32f10x_hd.s + +USART2_IRQHandler 0000001A + +Symbol: USART2_IRQHandler + Definitions + At line 302 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 118 in file CMSIS\startup\startup_stm32f10x_hd.s + + + +ARM Macro Assembler Page 11 Alphabetic symbol ordering +Relocatable symbols + + At line 241 in file CMSIS\startup\startup_stm32f10x_hd.s + +USART3_IRQHandler 0000001A + +Symbol: USART3_IRQHandler + Definitions + At line 303 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 119 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 242 in file CMSIS\startup\startup_stm32f10x_hd.s + +USBWakeUp_IRQHandler 0000001A + +Symbol: USBWakeUp_IRQHandler + Definitions + At line 306 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 122 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 245 in file CMSIS\startup\startup_stm32f10x_hd.s + +USB_HP_CAN1_TX_IRQHandler 0000001A + +Symbol: USB_HP_CAN1_TX_IRQHandler + Definitions + At line 283 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 99 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 222 in file CMSIS\startup\startup_stm32f10x_hd.s + +USB_LP_CAN1_RX0_IRQHandler 0000001A + +Symbol: USB_LP_CAN1_RX0_IRQHandler + Definitions + At line 284 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 100 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 223 in file CMSIS\startup\startup_stm32f10x_hd.s + +UsageFault_Handler 00000010 + +Symbol: UsageFault_Handler + Definitions + At line 179 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 68 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 180 in file CMSIS\startup\startup_stm32f10x_hd.s + +WWDG_IRQHandler 0000001A + +Symbol: WWDG_IRQHandler + Definitions + At line 264 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 80 in file CMSIS\startup\startup_stm32f10x_hd.s + At line 203 in file CMSIS\startup\startup_stm32f10x_hd.s + +72 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Absolute symbols + +Heap_Size 00000200 + +Symbol: Heap_Size + Definitions + At line 45 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 49 in file CMSIS\startup\startup_stm32f10x_hd.s +Comment: Heap_Size used once +Stack_Size 00000400 + +Symbol: Stack_Size + Definitions + At line 35 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 38 in file CMSIS\startup\startup_stm32f10x_hd.s +Comment: Stack_Size used once +__Vectors_Size 00000130 + +Symbol: __Vectors_Size + Definitions + At line 142 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 60 in file CMSIS\startup\startup_stm32f10x_hd.s +Comment: __Vectors_Size used once +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +External symbols + +SystemInit 00000000 + +Symbol: SystemInit + Definitions + At line 150 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 151 in file CMSIS\startup\startup_stm32f10x_hd.s +Comment: SystemInit used once +__main 00000000 + +Symbol: __main + Definitions + At line 149 in file CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 153 in file CMSIS\startup\startup_stm32f10x_hd.s +Comment: __main used once +2 symbols +423 symbols in table diff --git a/Hardware/Firmware/Gebot_Firmware v1.0/驱动固件的配置与使用.md b/Hardware/Firmware/Gebot_Firmware v1.0/驱动固件的配置与使用.md new file mode 100644 index 0000000..eb9d863 --- /dev/null +++ b/Hardware/Firmware/Gebot_Firmware v1.0/驱动固件的配置与使用.md @@ -0,0 +1,8 @@ +# 驱动固件的配置与使用 + +#### 一、下位机驱动板的通信 + +​ 小车驱动底板主要采用是串口通信，接口上支持`USB`通信。小车与`ROS`交互使用的是`uart3`(小车底板上的`micro usb`接口)，小车打印log采用是`uart1`(小车底板上的排针)。 + +1.1 测试通信命令 + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_GPIO.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_GPIO.c new file mode 100644 index 0000000..8af2dc4 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_GPIO.c @@ -0,0 +1,55 @@ +/* +******************************************************************************************************** +ļbsp_GPIO.c + ܣҪͨIO + עðеIOã + https://shop60670850.taobao.com + ߣlilianhe + : 2017-2-6 +********************************************************************************************************* +*/ + +/* +******************************************************************************************************** +GPIO־ +1.2017-2-6дLEDʼ + +********************************************************************************************************* +*/ + +#include "bsp_GPIO.h" + +/* +******************************************************************************************************** +ƣvoid LED_GPIO_Config(void) +ܣʼLED1GPIO +ӲӣLED1----PC13 + ע + : 2017-2-6 +********************************************************************************************************* +*/ +void LED_GPIO_Config(void) +{ + /*һGPIO_InitTypeDef͵Ľṹ*/ + GPIO_InitTypeDef GPIO_InitStructure; + RCC_APB2PeriphClockCmd( LED1_CLK, ENABLE); /*GPIOʱ*/ + GPIO_InitStructure.GPIO_Pin = LED1_Pin; /*ѡҪƵGPIO*/ + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; /*ģʽΪͨ*/ + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; /*Ϊ50MHz */ + GPIO_Init(LED1_PORT, &GPIO_InitStructure);/*ÿ⺯ʼGPIOC13*/ +} + +//LED˸ +void LED_Flash(int time) +{ + static int temp; + if(++temp==time) + { + GPIO_WriteBit(GPIOC, GPIO_Pin_13, (BitAction) (1 - GPIO_ReadInputDataBit(GPIOC, GPIO_Pin_13))) ;//LED ɫɫ״̬ת + temp=0; + } + +} + + +//------------------End of File---------------------------- diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_GPIO.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_GPIO.h new file mode 100644 index 0000000..60278ec --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_GPIO.h @@ -0,0 +1,49 @@ +#ifndef __BSP_GPIO_H +#define __BSP_GPIO_H + +#include "stm32f10x.h" + +/** the macro definition to trigger the led on or off + * 1 - off + *0 - on + */ +#define ON 0 +#define OFF 1 +//LED1 +#define LED1_CLK RCC_APB2Periph_GPIOC +#define LED1_PORT GPIOC +#define LED1_Pin GPIO_Pin_13 + + +/* κ꣬һʹ */ +#define LED1(a) if (a) \ + GPIO_SetBits(LED1_PORT,LED1_Pin);\ + else \ + GPIO_ResetBits(LED1_PORT,LED1_Pin) + + + + +///* ֱӲĴķIO */ +//#define digitalHi(p,i) {p->BSRR=i;} //Ϊߵƽ +//#define digitalLo(p,i) {p->BRR=i;} //͵ƽ +//#define digitalToggle(p,i) {p->ODR ^=i;} //ת״̬ +// +// +///* IOĺ */ +//#define LED1_TOGGLE digitalToggle(GPIOB,GPIO_Pin_0) +//#define LED1_OFF digitalHi(GPIOB,GPIO_Pin_0) +//#define LED1_ON digitalLo(GPIOB,GPIO_Pin_0) +// +//#define LED2_TOGGLE digitalToggle(GPIOF,GPIO_Pin_7) +//#define LED2_OFF digitalHi(GPIOF,GPIO_Pin_7) +//#define LED2_ON digitalLo(GPIOF,GPIO_Pin_7) +// +//#define LED3_TOGGLE digitalToggle(GPIOF,GPIO_Pin_8) +//#define LED3_OFF digitalHi(GPIOF,GPIO_Pin_8) +//#define LED3_ON digitalLo(GPIOF,GPIO_Pin_8) + +void LED_GPIO_Config(void); +void LED_Flash(int timer); + +#endif /* __LED_H */ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_NVIC.C b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_NVIC.C new file mode 100644 index 0000000..2b4513e --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_NVIC.C @@ -0,0 +1,43 @@ +/* +******************************************************************************************************** +ļbsp_NVIC.c + ܣж + ע + https://shop60670850.taobao.com + ߣlilianhe + : 2017-2-6 +********************************************************************************************************* +*/ + +/* +******************************************************************************************************** +־ +1.2017-2-6,дuarttimeж + + +********************************************************************************************************* +*/ + +#include "bsp_nvic.h" + +/* +******************************************************************************************************** +ƣvoid NVIC_Config(void) +ܣøжϵȼ +Ӳӣ + ע + : 2017-2-6 +********************************************************************************************************* +*/ +void NVIC_Config(void) +{ + //NVIC_TIM1_Config(); +} + + +////timer6ж +//void NVIC_TIM6_Config(void) +//{ + +//} + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_NVIC.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_NVIC.h new file mode 100644 index 0000000..e6bf9be --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_NVIC.h @@ -0,0 +1,11 @@ +#ifndef BSP_NVIC_H +#define BSP_NVIC_H + +#include "stm32f10x.h" +void NVIC_Config(void); +void NVIC_uart1_Config(void); +void NVIC_TIM1_Config(void); + + + +#endif diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_iic.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_iic.c new file mode 100644 index 0000000..b8c8695 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_iic.c @@ -0,0 +1,248 @@ + +#include "bsp_iic.h" + +/* +********************************************************************************************************* +* : i2c_Delay +* ˵: I2Cλӳ٣400KHz +* Σ +* ֵ: +********************************************************************************************************* +*/ +void i2c_Delay(void) +{ + uint8_t i; + + /* + ʱͨAX-Pro߼DzԵõġ + CPUƵ72MHzʱڲFlash, MDK̲Ż + ѭΪ10ʱSCLƵ = 205KHz + ѭΪ7ʱSCLƵ = 347KHz SCLߵƽʱ1.5usSCL͵ƽʱ2.87us + ѭΪ5ʱSCLƵ = 421KHz SCLߵƽʱ1.25usSCL͵ƽʱ2.375us + + IAṞЧʸߣΪ7 + */ + for (i = 0; i < 10; i++); +} + +/* +********************************************************************************************************* +* : i2c_Start +* ˵: CPUI2Cź +* Σ +* ֵ: +********************************************************************************************************* +*/ +void IIC_Start(void) +{ + /* SCLߵƽʱSDAһرʾI2Cź */ + I2C_SDA_1(); + I2C_SCL_1(); + i2c_Delay(); + I2C_SDA_0(); + i2c_Delay(); + I2C_SCL_0(); + i2c_Delay(); +} + +/* +********************************************************************************************************* +* : i2c_Start +* ˵: CPUI2Cֹͣź +* Σ +* ֵ: +********************************************************************************************************* +*/ +void IIC_Stop(void) +{ + /* SCLߵƽʱSDAһرʾI2Cֹͣź */ + I2C_SDA_0(); + I2C_SCL_1(); + i2c_Delay(); + I2C_SDA_1(); +} + +/* +********************************************************************************************************* +* : i2c_SendByte +* ˵: CPUI2C豸8bit +* Σ_ucByte ȴ͵ֽ +* ֵ: +********************************************************************************************************* +*/ +void IIC_Send_Byte(uint8_t _ucByte) +{ + uint8_t i; + + /* ȷֽڵĸλbit7 */ + for (i = 0; i < 8; i++) + { + if (_ucByte & 0x80) + { + I2C_SDA_1(); + } + else + { + I2C_SDA_0(); + } + i2c_Delay(); + I2C_SCL_1(); + i2c_Delay(); + I2C_SCL_0(); + if (i == 7) + { + I2C_SDA_1(); // ͷ + } + _ucByte <<= 1; /* һbit */ + i2c_Delay(); + } +} + +/* +********************************************************************************************************* +* : i2c_ReadByte +* ˵: CPUI2C豸ȡ8bit +* Σ +* ֵ: +********************************************************************************************************* +*/ +uint8_t IIC_Read_Byte(u8 ack) +{ + uint8_t i; + uint8_t value; + + /* 1bitΪݵbit7 */ + value = 0; + for (i = 0; i < 8; i++) + { + value <<= 1; + I2C_SCL_1(); + i2c_Delay(); + if (I2C_SDA_READ()) + { + value++; + } + I2C_SCL_0(); + i2c_Delay(); + } + if (!ack) + IIC_NAck();//??nACK + else + IIC_Ack(); //??ACK + return value; +} + +/* +********************************************************************************************************* +* : i2c_WaitAck +* ˵: CPUһʱӣȡACKӦź +* Σ +* ֵ: 0ʾȷӦ1ʾӦ +********************************************************************************************************* +*/ +uint8_t IIC_Wait_Ack(void) +{ + uint8_t re; + + I2C_SDA_1(); /* CPUͷSDA */ + i2c_Delay(); + I2C_SCL_1(); /* CPUSCL = 1, ʱ᷵ACKӦ */ + i2c_Delay(); + if (I2C_SDA_READ()) /* CPUȡSDA״̬ */ + { + re = 1; + } + else + { + re = 0; + } + I2C_SCL_0(); + i2c_Delay(); + return re; +} + +/* +********************************************************************************************************* +* : i2c_Ack +* ˵: CPUһACKź +* Σ +* ֵ: +********************************************************************************************************* +*/ +void IIC_Ack(void) +{ + I2C_SDA_0(); /* CPUSDA = 0 */ + i2c_Delay(); + I2C_SCL_1(); /* CPU1ʱ */ + i2c_Delay(); + I2C_SCL_0(); + i2c_Delay(); + I2C_SDA_1(); /* CPUͷSDA */ +} + +/* +********************************************************************************************************* +* : i2c_NAck +* ˵: CPU1NACKź +* Σ +* ֵ: +********************************************************************************************************* +*/ +void IIC_NAck(void) +{ + I2C_SDA_1(); /* CPUSDA = 1 */ + i2c_Delay(); + I2C_SCL_1(); /* CPU1ʱ */ + i2c_Delay(); + I2C_SCL_0(); + i2c_Delay(); +} + +/* +********************************************************************************************************* +* : i2c_CfgGpio +* ˵: I2CߵGPIOģIOķʽʵ +* Σ +* ֵ: +********************************************************************************************************* +*/ +void IIC_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + + RCC_APB2PeriphClockCmd(RCC_I2C_PORT, ENABLE); /* GPIOʱ */ + + GPIO_InitStructure.GPIO_Pin = I2C_SCL_PIN | I2C_SDA_PIN; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD; /* © */ + GPIO_Init(GPIO_PORT_I2C, &GPIO_InitStructure); + + /* һֹͣź, λI2Cϵ豸ģʽ */ + IIC_Stop(); +} + +/* +********************************************************************************************************* +* : i2c_CheckDevice +* ˵: I2C豸CPU豸ַȻȡ豸Ӧжϸ豸Ƿ +* Σ_Address豸I2Cߵַ +* ֵ: ֵ 0 ʾȷ 1ʾδ̽⵽ +********************************************************************************************************* +*/ +uint8_t i2c_CheckDevice(uint8_t _Address) +{ + uint8_t ucAck; + + IIC_Init(); /* GPIO */ + + + IIC_Start(); /* ź */ + + /* 豸ַ+дbit0 = w 1 = r) bit7 ȴ */ + IIC_Send_Byte(_Address | I2C_WR); + ucAck = IIC_Wait_Ack(); /* 豸ACKӦ */ + + IIC_Stop(); /* ֹͣź */ + + return ucAck; +} diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_iic.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_iic.h new file mode 100644 index 0000000..d3d1a63 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_iic.h @@ -0,0 +1,65 @@ +#ifndef __BSP_IIC_H +#define __BSP_IIC_H +#include "stm32f10x.h" + +/* I2CӵGPIO˿, ûֻҪ޸4д뼴ıSCLSDA */ +#define GPIO_PORT_I2C GPIOB /* GPIO˿ */ +#define RCC_I2C_PORT RCC_APB2Periph_GPIOB /* GPIO˿ʱ */ +#define I2C_SCL_PIN GPIO_Pin_10 /* ӵSCLʱߵGPIO */ +#define I2C_SDA_PIN GPIO_Pin_11 /* ӵSDAߵGPIO */ + +/* дSCLSDAĺ꣬ӴĿֲԺͿĶ */ +#if 1 /* 룺 1 ѡGPIOĿ⺯ʵIOд */ + #define I2C_SCL_1() GPIO_SetBits(GPIO_PORT_I2C, I2C_SCL_PIN) /* SCL = 1 */ + #define I2C_SCL_0() GPIO_ResetBits(GPIO_PORT_I2C, I2C_SCL_PIN) /* SCL = 0 */ + + #define I2C_SDA_1() GPIO_SetBits(GPIO_PORT_I2C, I2C_SDA_PIN) /* SDA = 1 */ + #define I2C_SDA_0() GPIO_ResetBits(GPIO_PORT_I2C, I2C_SDA_PIN) /* SDA = 0 */ + + #define I2C_SDA_READ() GPIO_ReadInputDataBit(GPIO_PORT_I2C, I2C_SDA_PIN) /* SDA״̬ */ +#else /* ֧ѡֱӼĴʵIOд */ + /*ע⣺дIAR߼ŻʱᱻŻ */ + #define I2C_SCL_1() GPIO_PORT_I2C->BSRR = I2C_SCL_PIN /* SCL = 1 */ + #define I2C_SCL_0() GPIO_PORT_I2C->BRR = I2C_SCL_PIN /* SCL = 0 */ + + #define I2C_SDA_1() GPIO_PORT_I2C->BSRR = I2C_SDA_PIN /* SDA = 1 */ + #define I2C_SDA_0() GPIO_PORT_I2C->BRR = I2C_SDA_PIN /* SDA = 0 */ + + #define I2C_SDA_READ() ((GPIO_PORT_I2C->IDR & I2C_SDA_PIN) != 0) /* SDA״̬ */ +#endif + + +#include + +#define I2C_WR 0 /* дbit */ +#define I2C_RD 1 /* bit */ + +void i2c_Delay(void); +void IIC_Init(void); +void IIC_Start(void); +void IIC_Stop(void); +void IIC_Send_Byte(uint8_t _ucByte); +uint8_t IIC_Read_Byte(u8 ack); +uint8_t IIC_Wait_Ack(void); +void IIC_Ack(void); +void IIC_NAck(void); +uint8_t i2c_CheckDevice(uint8_t _Address); + + +#endif + + + + + + + + + + + + + + + + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_sys.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_sys.c new file mode 100644 index 0000000..7bac138 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_sys.c @@ -0,0 +1,53 @@ +/******************** (C) COPYRIGHT 2023 GeekRebot ***************************** +* File Name : bsp_sys.c +* Current Version : V1.0 & ST 3.5.0 +* Author : zhanli 719901725@qq.com +* Date of Issued : 2023.04.06 zhanli: Create +* Comments : ʼ +********************************************************************************/ +#include "bsp_sys.h" + +/**---------------------------------------------------------------------- +* Function : System_Init +* Description : GeekRebotʼ +* Author : zhanli&719901725@qq.com +* Date : 2023/04/22 zhanli +*---------------------------------------------------------------------**/ +void System_Init(void) +{ + Delay_Init(72); // δʱӳʼ + NVIC_Config(); // жóʼ + LED_GPIO_Config(); // LEDʼ + USART1_Init(115200); // ڳʼ + IIC_Init(); // IICģʼ + MOTO_GPIO_Init(); // IO + MOTO_PWM_Init(3599,0); // PWMƵʳʼ20KHz + + OLED_Init(); + OLED_Clear(); + OLED_ShowCHinese(0,0,2); // ʾ + OLED_ShowCHinese(16,0,3); // ʾ + OLED_ShowString(88,0,(u8*)"m/min",16); // OLEDһʾ峵 λm/min + OLED_ShowString(0, 2,(u8*)"Left : RPM",12); // ʾת RλRPM ʾÿӳֵȦ + OLED_ShowString(0, 3,(u8*)"Right: RPM",12); // ʾת RλRPM ʾÿӳֵȦ + OLED_ShowString(0, 4,(u8*)"P: I: D: ",16); // ʾPID + OLED_ShowString(0, 6,(u8*)"Set_C: RPM",12); // õijתٵλRPM + OLED_ShowString(0, 7,(u8*)"Set_P: m/min",12); // õijתٵλRPM + + Encoder_Init_TIM2(); + TIM2 -> CNT=30000; + Encoder_Init_TIM4(); + TIM4 -> CNT=30000; + + MOTO_PWM_Out(100, 100); + + Timer6_Init(); //ʱ6 + Delay_ms(100); //ȴʼ + + int Moto_Left=500; + int Moto_Right=500; + TIM3->CCR3 = Moto_Left; //pwm + TIM3->CCR4 = Moto_Right; //pwm +} + + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_sys.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_sys.h new file mode 100644 index 0000000..f78e371 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_sys.h @@ -0,0 +1,29 @@ +#ifndef _BSP_SYS_H +#define _BSP_SYS_H + +// ̼STM32F103RCT6 64Pin STM32, ûSTM32F10X_HDܻ +// ľ +#ifndef STM32F10X_HD + #define STM32F10X_HD +#endif + +//DRVͷļ +#include "stm32f10x.h" +#include "delay.h" +#include "bsp_GPIO.h" +#include "bsp_nvic.h" +#include "bsp_usart.h" +#include "bsp_timer.h" +#include "bsp_iic.h" + +//HARDWAREͷļ +#include "oled.h" +#include "moto.h" +#include "pid.h" + + +void System_Init(void); + +#endif + + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_timer.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_timer.c new file mode 100644 index 0000000..fc694f9 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_timer.c @@ -0,0 +1,232 @@ +/* +******************************************************************************************************** +ļbsp_timer.c + ܣ + עtimer3 pwm,õtimer3ch3ch4 PB0-PB1ӵʹܶPWMA PWMBҵ + timer1 ϵͳ100msʱ + timer2 + timer4 ҵ +********************************************************************************************************* +*/ + + +#include "bsp_timer.h" + +//***************************ʱ3ʼ ṩPWM***************************// +// TIM_Period / Auto Reload Register(ARR) = 1000 TIM_Prescaler--71 +//arrԶװĴpscƵϵ +//PWMƵ = 72MHz/ARR/PCS 20K = 72M/3600/1 = 20K + + +//=====ʼPWM 20KHZ ƵԷֹƵʱļ +// ARR= 3599 ʱƵΪ20Khz +//PB0PWMA--right motoPB1PWMB--left motoSTBYֱ +//arrԶװĴpscƵϵ +//PWMƵ = 72MHz/ARR/PCS 20K = 72M/3600/1 = 20K +void MOTO_PWM_Init(u32 arr, int psc) +{ + TIM_OCInitTypeDef TIM_OCInitSructure; + GPIO_InitTypeDef GPIO_InitStructure; + TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; + + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE); + TIM_TimeBaseStructure.TIM_Period = arr-1; //ԶװؼĴڵֵ壨ֵ) + TIM_TimeBaseStructure.TIM_Prescaler = psc; //ʱӷƵϵ + TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1; //ⲿʱӽвʱӷƵ + TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; //ϼ + TIM_TimeBaseInit(TIM3,&TIM_TimeBaseStructure); //ʼ + + TIM_ClearFlag(TIM3, TIM_FLAG_Update); + TIM_ITConfig(TIM3, TIM_IT_Update, ENABLE); + //pwm˿ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0| GPIO_Pin_1; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; // + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(GPIOB, &GPIO_InitStructure); + + //ͨ3 pwm + TIM_OCInitSructure.TIM_OCMode = TIM_OCMode_PWM1; + TIM_OCInitSructure.TIM_OutputState= TIM_OutputState_Enable; + TIM_OCInitSructure.TIM_Pulse = 0;//ռձ= 50/100 + TIM_OCInitSructure.TIM_OCPolarity = TIM_OCPolarity_High;//ʱֵСCCR1_ValʱΪߵƽ + TIM_OC3Init(TIM3, &TIM_OCInitSructure);//ʼ + TIM_OC3PolarityConfig(TIM3, TIM_OCPreload_Enable);//ʼpwm + + //ͨ4 pwm + TIM_OCInitSructure.TIM_OCMode = TIM_OCMode_PWM1; + TIM_OCInitSructure.TIM_OutputState= TIM_OutputState_Enable; + TIM_OCInitSructure.TIM_Pulse = 0;//ռձ= 50/100 + TIM_OCInitSructure.TIM_OCPolarity = TIM_OCPolarity_High;//ʱֵСCCR1_ValʱΪߵƽ + TIM_OC4Init(TIM3, &TIM_OCInitSructure);//ʼ + TIM_OC4PolarityConfig(TIM3, TIM_OCPreload_Enable);//ʼpwm + + TIM_ARRPreloadConfig(TIM3, ENABLE);//Զװ + TIM_Cmd(TIM3, ENABLE);//ʱ +} + + +//ռձ = TIMx_CCRx / TIMx_ARR +//moto_rֵmoto_lֵ. ֵ 0-100 +void MOTO_PWM_Out(u16 moto_l, u16 moto_r) +{ + + TIM_OCInitTypeDef TIM_OCInitSructure; + + TIM_OCInitSructure.TIM_OCMode = TIM_OCMode_PWM1; + TIM_OCInitSructure.TIM_OutputState= TIM_OutputState_Enable; + //CH3 Left Motor + TIM_OCInitSructure.TIM_Pulse = moto_l;//ռձ= ccr/100 + TIM_OC3Init(TIM3, &TIM_OCInitSructure);//ʼ + TIM_OC3PolarityConfig(TIM3, TIM_OCPreload_Enable);//ʼpwm + + //CH4 Right Motor + TIM_OCInitSructure.TIM_Pulse = moto_r;//ռձ= ccr /100 + TIM_OC4Init(TIM3, &TIM_OCInitSructure);//ʼ + TIM_OC4PolarityConfig(TIM3, TIM_OCPreload_Enable);//ʼpwm + + TIM_ARRPreloadConfig(TIM3, ENABLE);//Զװ +} + + + + + +//***************************ʱ1ʼ ϵͳÿ10msһжϣݣpwm***************************// +void Timer6_Init(void) +{ + TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; + + NVIC_InitTypeDef NVIC_InitStructure; + + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6, ENABLE); + TIM_TimeBaseStructure.TIM_Period = 9999;//ԶװؼĴڵֵ壨ֵ) + TIM_TimeBaseStructure.TIM_Prescaler = 719;//ʱӷƵϵ + TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;//ⲿʱӽвʱӷƵ + TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;//ϼ + TIM_TimeBaseStructure.TIM_RepetitionCounter=0; //߼ʱ1öʱſļƵһʼ72mhz ֵעĵط + TIM_TimeBaseInit(TIM6,&TIM_TimeBaseStructure);//ʼ + + TIM_ClearFlag(TIM6, TIM_FLAG_Update); + TIM_ITConfig(TIM6, TIM_IT_Update, ENABLE); + + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4); + NVIC_InitStructure.NVIC_IRQChannel=TIM6_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority=5; + NVIC_InitStructure.NVIC_IRQChannelSubPriority=0; + NVIC_InitStructure.NVIC_IRQChannelCmd=ENABLE; + NVIC_Init(&NVIC_InitStructure); + + TIM_Cmd(TIM6, ENABLE);//ʱ +} + +//***************************ʱ2ʼ ʹñ***************************// +// +//PA0---- A ߵB2Bʶ +//PA1---- B ߵB2Aʶ +void Encoder_Init_TIM2(void) +{ + TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; + TIM_ICInitTypeDef TIM_ICInitStructure; + GPIO_InitTypeDef GPIO_InitStructure; + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);//ʹܶʱ4ʱ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);//ʹPB˿ʱ + + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0|GPIO_Pin_1; //˿ + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; // + GPIO_Init(GPIOA, &GPIO_InitStructure); //趨ʼGPIOB + + TIM_TimeBaseStructInit(&TIM_TimeBaseStructure); + TIM_TimeBaseStructure.TIM_Prescaler = 0x0; // ԤƵ + TIM_TimeBaseStructure.TIM_Period = ENCODER_TIM_PERIOD; //趨Զװֵ + TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;//ѡʱӷƵƵ + TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;////TIMϼ + TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure); + TIM_EncoderInterfaceConfig(TIM2, TIM_EncoderMode_TI12, TIM_ICPolarity_Rising, TIM_ICPolarity_Rising);//ʹñģʽ3 + TIM_ICStructInit(&TIM_ICInitStructure); + TIM_ICInitStructure.TIM_ICFilter = 10; + TIM_ICInit(TIM2, &TIM_ICInitStructure); + TIM_ClearFlag(TIM2, TIM_FLAG_Update);//TIMĸ±־λ + TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE); + //Reset counter + TIM_SetCounter(TIM2,0); + TIM_Cmd(TIM2, ENABLE); +} + +//***************************ʱ4ʼ ʹñ***************************// +//ҵ +//PB6---- B ߵB1Aʶ +//PB7---- A ߵB1Bʶ +void Encoder_Init_TIM4(void) +{ + TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; + TIM_ICInitTypeDef TIM_ICInitStructure; + GPIO_InitTypeDef GPIO_InitStructure; + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4, ENABLE);//ʹܶʱ4ʱ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);//ʹPB˿ʱ + + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6|GPIO_Pin_7; //˿ + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; // + GPIO_Init(GPIOB, &GPIO_InitStructure); //趨ʼGPIOB + + TIM_TimeBaseStructInit(&TIM_TimeBaseStructure); + TIM_TimeBaseStructure.TIM_Prescaler = 0x0; // ԤƵ + TIM_TimeBaseStructure.TIM_Period = ENCODER_TIM_PERIOD; //趨Զװֵ + TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;//ѡʱӷƵƵ + TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;////TIMϼ + TIM_TimeBaseInit(TIM4, &TIM_TimeBaseStructure); + TIM_EncoderInterfaceConfig(TIM4, TIM_EncoderMode_TI12, TIM_ICPolarity_Rising, TIM_ICPolarity_Rising);//ʹñģʽ3 + TIM_ICStructInit(&TIM_ICInitStructure); + TIM_ICInitStructure.TIM_ICFilter = 10; + TIM_ICInit(TIM4, &TIM_ICInitStructure); + TIM_ClearFlag(TIM4, TIM_FLAG_Update);//TIMĸ±־λ + TIM_ITConfig(TIM4, TIM_IT_Update, ENABLE); + //Reset counter + TIM_SetCounter(TIM4,0); + TIM_Cmd(TIM4, ENABLE); + + +} + +/************************************************************************** +ܣλʱȡ +ڲʱ + ֵٶֵ +**************************************************************************/ +int Read_Encoder(u8 TIMX) +{ + int Encoder_TIM; + switch(TIMX) + { + case 2: Encoder_TIM= (short)TIM2 -> CNT; TIM2 -> CNT=30000;break; + case 3: Encoder_TIM= (short)TIM3 -> CNT; TIM3 -> CNT=30000;break; + case 4: Encoder_TIM= (short)TIM4 -> CNT; TIM4 -> CNT=30000;break; + default: Encoder_TIM=0; + } + return Encoder_TIM; +} + +/************************************************************************** +ܣTIM4жϷ +ڲ + ֵ +**************************************************************************/ +void TIM4_IRQHandler(void) +{ + if(TIM4->SR&0X0001)//ж + { + } + TIM4->SR&=~(1<<0);//жϱ־λ +} +/************************************************************************** +ܣTIM2жϷ +ڲ + ֵ +**************************************************************************/ +void TIM2_IRQHandler(void) +{ + if(TIM2->SR&0X0001)//ж + { + } + TIM2->SR&=~(1<<0);//жϱ־λ +} diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_timer.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_timer.h new file mode 100644 index 0000000..552c914 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_timer.h @@ -0,0 +1,19 @@ +#ifndef __BSP_TIMER3_H +#define __BSP_TIMER3_H + + +#include "stm32f10x.h" + + +#define ENCODER_TIM_PERIOD (u16)(60000) // number of pulses per revolution +void Timer3_Init(u32 arr,int psc); +void MOTO_PWM_Init(u32 arr, int psc); +void MOTO_PWM_Out(u16 moto_r, u16 moto_l); +void Timer6_Init(void); +void Encoder_Init_TIM2(void); +void Encoder_Init_TIM4(void); +int Read_Encoder(u8 TIMX); + + +#endif + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_usart.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_usart.c new file mode 100644 index 0000000..264b681 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_usart.c @@ -0,0 +1,162 @@ +/* +******************************************************************************************************** +ļbsp_usart.c + ܣں + ע + https://shop60670850.taobao.com + ߣlilianhe + : 2017-2-8 +********************************************************************************************************* +*/ + +/* +******************************************************************************************************** +־ +1.2017-2-8дuart1 + +********************************************************************************************************* +*/ +#include "bsp_usart.h" +#include + +volatile unsigned char *rx_address; +volatile unsigned int rx_count; +volatile unsigned int rx_length; + +/* +******************************************************************************************************** +ƣvoid USART1_Init(u32 bound) +ܣ1ʼ +ӲӣPA9----TXDPA10----RXD + עboundΪò + : 2017-2-8 +********************************************************************************************************* +*/ +void USART1_Init(u32 bound) +{ + GPIO_InitTypeDef GPIO_InitStructure; + USART_InitTypeDef USART_InitStructure; + + /* config USART1 clock */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE); + + /* USART1 GPIO config */ + /* Configure USART1 Tx (PA.09) as alternate function push-pull */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(GPIOA, &GPIO_InitStructure); + /* Configure USART1 Rx (PA.10) as input floating */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(GPIOA, &GPIO_InitStructure); + + /* USART1 mode config */ + USART_InitStructure.USART_BaudRate = bound; + USART_InitStructure.USART_WordLength = USART_WordLength_8b; + USART_InitStructure.USART_StopBits = USART_StopBits_1; + USART_InitStructure.USART_Parity = USART_Parity_No ; + USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_Init(USART1, &USART_InitStructure); + + /* ʹܴ1ж */ + USART_ITConfig(USART1, USART_IT_RXNE, ENABLE); + + USART_Cmd(USART1, ENABLE); +} + + + + +/// ضc⺯printfUSART1 +int fputc(int ch, FILE *f) +{ + /* һֽݵUSART1 */ + USART_SendData(USART1, (uint8_t) ch); + + /* ȴ */ + while (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET); + + return (ch); +} + +/// ضc⺯scanfUSART1 +int fgetc(FILE *f) +{ + /* ȴ1 */ + while (USART_GetFlagStatus(USART1, USART_FLAG_RXNE) == RESET); + + return (int)USART_ReceiveData(USART1); +} +/* +******************************************************************************************************** +ƣvoid USART1_Send(unsigned char *tx_buf, int len) +ܣ1ͺ +ӲӣPA9----TXDPA10----RXD + ע + : 2017-2-8 +********************************************************************************************************* +*/ +void USART1_Send(unsigned char *tx_buf, int len) +{ + USART_ClearFlag(USART1, USART_FLAG_TC); + USART_ClearITPendingBit(USART1, USART_FLAG_TXE); + while(len--) + { + USART_SendData(USART1, *tx_buf); + while(USART_GetFlagStatus(USART1, USART_FLAG_TC) != 1); + USART_ClearFlag(USART1, USART_FLAG_TC); + USART_ClearITPendingBit(USART1, USART_FLAG_TXE); + tx_buf++; + } + +} + +/* +******************************************************************************************************** +ƣvoid USART1_Receive(unsigned char *rx_buf, int len) +ܣ1պ +ӲӣPA9----TXDPA10----RXD + ע + : 2017-2-8 +********************************************************************************************************* +*/ +void USART1_Receive(unsigned char *rx_buf, int len) +{ + rx_count = 0; + rx_length = len; + rx_address = rx_buf; +} +/* +******************************************************************************************************** +ƣvoid USART1_IRQHandler(void) +ܣ1жϷ +ӲӣPA9----TXDPA10----RXD + ע + : 2017-2-8 +********************************************************************************************************* +*/ +void USART1_IRQHandler(void) +{ + unsigned char Res; + //u8 Res; + if(USART_GetITStatus(USART1, USART_IT_RXNE) != RESET) //ж(յݱ0x0d 0x0aβ) + { + + Res = USART_ReceiveData(USART1); + // printf("[USART1_IRQHandler],Rec_data = %x\r\n", Res); + + if(rx_length > rx_count) + { + *rx_address = Res; + rx_address++; + rx_count++; + } + USART_ClearITPendingBit(USART1, USART_IT_RXNE); + + } +} + + +/*********************************************END OF FILE**********************/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_usart.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_usart.h new file mode 100644 index 0000000..0d606c5 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/bsp_usart.h @@ -0,0 +1,16 @@ +#ifndef __USART_H +#define __USART_H + +#include "stm32f10x.h" +#include + + +void USART1_Init(u32 bound); +void NVIC_Configuration(void); +int fputc(int ch, FILE *f); +int fgetc(FILE *f); +void USART1_Send(unsigned char *tx_buf, int len); +void USART1_Receive(unsigned char *rx_buf, int len); + + +#endif /* __USART1_H */ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/delay.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/delay.c new file mode 100644 index 0000000..e8c213b --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/delay.c @@ -0,0 +1,96 @@ +/* +******************************************************************************************************** +ļdelay.c + ܣʱus ms + ע + https://shop60670850.taobao.com + ߣlilianhe + : 2017-2-6 +********************************************************************************************************* +*/ + +/* +******************************************************************************************************** +־ +1.2017-2-6жеóѭĴ󣬷ֹʱ׼ȷ,do whileṹ! + +********************************************************************************************************* +*/ + +#include "delay.h" + +static u8 fac_us=0;//usʱ +static u16 fac_ms=0;//msʱ + +/* +******************************************************************************************************** +ƣDelay_Init(u8 SYSCLK) +ܣʼӳٺ +ӲӣSYSTICKʱӹ̶ΪHCLKʱӵ1/8SYSCLK:ϵͳʱ + ע + : 2017-2-6 +********************************************************************************************************* +*/ +void Delay_Init(u8 SYSCLK) +{ +// SysTick->CTRL&=0xfffffffb;//bit2,ѡⲿʱ HCLK/8 + SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK_Div8); //ѡⲿʱ HCLK/8 + fac_us=SYSCLK/8; + fac_ms=(u16)fac_us*1000; +} + +/* +******************************************************************************************************** +ƣDelay_ms(u16 nms) +ܣʱnms +Ӳӣ//SysTick->LOADΪ24λĴ,,ʱΪ: + //nms<=0xffffff*8*1000/SYSCLK + //SYSCLKλΪHz,nmsλΪms + //72M,nms<=1864 + ע + : 2017-2-6 +********************************************************************************************************* +*/ +void Delay_ms(u16 nms) +{ + u32 temp; + SysTick->LOAD=(u32)nms*fac_ms;//ʱ(SysTick->LOADΪ24bit) + SysTick->VAL =0x00; //ռ + SysTick->CTRL=0x01 ; //ʼ + do + { + temp=SysTick->CTRL; + } + while(temp&0x01&&!(temp&(1<<16)));//ȴʱ䵽 + SysTick->CTRL=0x00; //رռ + SysTick->VAL =0X00; //ռ +} + +/* +******************************************************************************************************** +ƣvoid Delay_us(u32 nus) +ܣʱnus +Ӳӣ + ע: + : 2017-2-6 +********************************************************************************************************* +*/ +void Delay_us(u32 nus) +{ + u32 temp; + SysTick->LOAD=nus*fac_us; //ʱ + SysTick->VAL=0x00; //ռ + SysTick->CTRL=0x01 ; //ʼ + do + { + temp=SysTick->CTRL; + } + while(temp&0x01&&!(temp&(1<<16)));//ȴʱ䵽 + SysTick->CTRL=0x00; //رռ + SysTick->VAL =0X00; //ռ +} +//------------------End of File---------------------------- + + + + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/delay.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/delay.h new file mode 100644 index 0000000..d7a960a --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/DRV/delay.h @@ -0,0 +1,38 @@ +#ifndef __DELAY_H +#define __DELAY_H +#include "stm32f10x.h" + +void Delay_Init(u8 SYSCLK); +void Delay_ms(u16 nms); +void Delay_us(u32 nus); + +#endif + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/bluetooth.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/bluetooth.c new file mode 100644 index 0000000..f451ae3 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/bluetooth.c @@ -0,0 +1,127 @@ +/******************** (C) COPYRIGHT 2023 GeekRebot ***************************** +* File Name : bluetooth.c +* Current Version : V1.0 & ST 3.5.0 +* Author : zhanli 719901725@qq.com +* Date of Issued : 2023.04.06 zhanli: Create +* Comments : GeekRebot ģ,ʹHC05ģ飬͸ܣ + ʹôڲ࣬ʹstm32 uart2ģֻҪ + ӿڣTXDRXD5VGND + 1. PA2 -> RXD 2.PA3 -> TXD +********************************************************************************/ +#include "bluetooth.h" +#include + +volatile unsigned char *rx2_address; +volatile unsigned int rx2_count; +volatile unsigned int rx2_length; + +/**---------------------------------------------------------------------- +* Function : Bluetooth_Init +* Description : 1ʼ,PA2->RXD, PA3->TXD, boundΪò +* Author : zhanli&719901725@qq.com +* Date : 2023/05/20 zhanli +*---------------------------------------------------------------------**/ +void Bluetooth_Init(u32 bound) +{ + GPIO_InitTypeDef GPIO_InitStructure; + USART_InitTypeDef USART_InitStructure; + NVIC_InitTypeDef NVIC_InitStructure; + + /* Config USART2 clock */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE); + + /* USART2 GPIO config */ + /* Configure USART2 Tx (PA.02) as alternate function push-pull */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(GPIOA, &GPIO_InitStructure); + /* Configure USART2 Rx (PA.03) as input floating */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(GPIOA, &GPIO_InitStructure); + + /* USART2 mode config */ + USART_InitStructure.USART_BaudRate = bound; + USART_InitStructure.USART_WordLength = USART_WordLength_8b; + USART_InitStructure.USART_StopBits = USART_StopBits_1; + USART_InitStructure.USART_Parity = USART_Parity_No ; + USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_Init(USART2, &USART_InitStructure); + + + /* Configure the NVIC Preemption Priority Bits */ + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_0); + + /* Enable the USARTy Interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + + /* ʹܴ1ж */ + USART_ITConfig(USART2, USART_IT_RXNE, ENABLE); + USART_Cmd(USART2, ENABLE); +} + +/**---------------------------------------------------------------------- +* Function : USART2_Send +* Description : ͨUSART2͵ֻ +* Author : zhanli&719901725@qq.com +* Date : 2023/05/20 zhanli +*---------------------------------------------------------------------**/ +void USART2_Send(unsigned char *tx_buf, int len) +{ + USART_ClearFlag(USART2, USART_FLAG_TC); + USART_ClearITPendingBit(USART2, USART_FLAG_TXE); + while(len--) + { + USART_SendData(USART2, *tx_buf); + while(USART_GetFlagStatus(USART2, USART_FLAG_TC) != 1); + USART_ClearFlag(USART2, USART_FLAG_TC); + USART_ClearITPendingBit(USART2, USART_FLAG_TXE); + tx_buf++; + } +} + + +/**---------------------------------------------------------------------- +* Function : USART2_Receive +* Description : ܣֻ +* Author : zhanli&719901725@qq.com +* Date : 2023/05/20 zhanli +*---------------------------------------------------------------------**/ +void USART2_Receive(unsigned char *rx_buf, int len) +{ + rx2_count = 0; + rx2_length = len; + rx2_address = rx_buf; +} + + +/**---------------------------------------------------------------------- +* Function : USART2_Receive +* Description : 2жϺ +* Author : zhanli&719901725@qq.com +* Date : 2023/05/20 zhanli +*---------------------------------------------------------------------**/ +void USART2_IRQHandler(void) +{ + unsigned char Res; + // ж(յݱ0x0d 0x0aβ) + if(USART_GetITStatus(USART2, USART_IT_RXNE) != RESET) + { + Res = USART_ReceiveData(USART2); + + if(rx2_length > rx2_count) + { + *rx2_address = Res; + rx2_address++; + rx2_count++; + } + USART_ClearITPendingBit(USART2, USART_IT_RXNE); + } +} diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/bluetooth.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/bluetooth.h new file mode 100644 index 0000000..842c7f7 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/bluetooth.h @@ -0,0 +1,31 @@ +#ifndef __BLUETOOTH_H +#define __BLUETOOTH_H + +#include "bsp_sys.h" +#include "stm32f10x.h" + +/**---------------------------------------------------------------------- +* Function : Bluetooth_Init +* Description : 1ʼ,PA2->RXD, PA3->TXD, boundΪò +* Author : zhanli&719901725@qq.com +* Date : 2023/05/20 zhanli +*---------------------------------------------------------------------**/ +void Bluetooth_Init(u32 bound); + +/**---------------------------------------------------------------------- +* Function : USART2_Send +* Description : ͨUSART2͵ֻ +* Author : zhanli&719901725@qq.com +* Date : 2023/05/20 zhanli +*---------------------------------------------------------------------**/ +void USART2_Send(unsigned char *tx_buf, int len); + +/**---------------------------------------------------------------------- +* Function : USART2_Receive +* Description : ܣֻ +* Author : zhanli&719901725@qq.com +* Date : 2023/05/20 zhanli +*---------------------------------------------------------------------**/ +void USART2_Receive(unsigned char *rx_buf, int len); + +#endif diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/car.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/car.c new file mode 100644 index 0000000..800f4ed --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/car.c @@ -0,0 +1,97 @@ +/******************** (C) COPYRIGHT 2023 GeekRebot ***************************** +* File Name : car.c +* Current Version : V1.0 & ST 3.5.0 +* Author : zhanli 719901725@qq.com +* Date of Issued : 2023.04.06 zhanli: Create +* Comments : GeekRebot +********************************************************************************/ + +#include "car.h" +#include "pid.h" + +int Encoder_Left,Encoder_Right; // +int Moto_Left,Moto_Right; +int para_L,para_R;// + +//úҪ +int SetPoint=70;//ĿֵλRPMתٶ = setopint*ܳ = setpoint*3.14*0.065(ֱ65mm) λm/min һҪתٺٵĹϵ + + +//ʹüٱ1120ļ䡣ʵʵļٱȵ޸² +//6240=13*4*12013ߣSTM32ģʽ 4Ƶ1120 +//2496=13*4*4813ߣSTM32ģʽ 4Ƶ148 +#define SetPointL SetPoint*2496/600 //ɱΪpidƵDZ +#define SetPointR SetPoint*2496/600 //ɱΪpidƵDZ + +//ֱ +u32 temp1,temp2; +float temp3,temp4; +char set_speed[5];//ʾС +char speed[5];//ʾС +//Time1ʱ1жϷ +//100msʱ + + +void TIM6_IRQHandler(void) +{ + // ﶨʱ + if(TIM_GetFlagStatus(TIM6, TIM_IT_Update) != RESET) + { + TIM_ClearITPendingBit(TIM6, TIM_FLAG_Update); // ж + + LED_Flash(5); // 500ms˸һ + Encoder_Left = Read_Encoder(2) - 30000; // ȡ + Encoder_Right = Read_Encoder(4) - 30000; // ȡ + + //Сƶٶȣٶ + //㳵٣ֺٶȺͳ2 λ m/min + temp3 = (Encoder_Right + Encoder_Left) / 2*600/2496 *0.065*3.1415; + sprintf(speed,"%2.2f",temp3); + OLED_ShowString(48,0, (u8*)speed,16); //OLEDʾ + + if(Encoder_Left < 0)//ת + { + Encoder_Left = -Encoder_Left; + } + if(Encoder_Right < 0) + { + Encoder_Right = -Encoder_Right; + } + para_L=PID_Calc_Left(Encoder_Left,SetPointL); // õʽPIDֵ + para_R=PID_Calc_Right(Encoder_Right,SetPointR); // ҵõʽPIDֵ + + if((para_L<-3)||(para_L>3)) // PID СʱƵ𵴡 + { + Moto_Left +=para_L; + } + if((para_R<-3)||(para_R>3)) // PID СʱƵ𵴡 + { + Moto_Right += para_R; + } + + if(Moto_Left>3500)Moto_Left=3000; //޷ ֹջٵ + if(Moto_Right>3500)Moto_Right=3000; //޷ + + Moto_Left=1500; + Moto_Right=1500; + //TIM3->CCR3=Moto_Left; //pwm + //TIM3->CCR4=Moto_Right; //pwm + + //ʾpid + showPID(); + //ʾֵֺת λRPM + temp1 = Encoder_Left*600/2496; + OLED_ShowNum(56,2,Moto_Left,4,12); //ʵʼת λRPM + temp2 = Encoder_Right*600/2496; + OLED_ShowNum(56,3,Moto_Right,4,12); //ʵʼת λRPM + + //趨ֵʾ + OLED_ShowNum(48,6,SetPoint,3,12); //ʾ趨ijת λRPM + //temp4 = SetPoint*3.1415*0.065; //趨ٶ + //sprintf(set_speed,"%2.2f",temp4); + //OLED_ShowString(48,7, set_speed,12); //趨ٶ λm/min + } +} + + + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/car.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/car.h new file mode 100644 index 0000000..049e61d --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/car.h @@ -0,0 +1,9 @@ +#ifndef __CAR_H +#define __CAR_H + +#include "stm32f10x.h" +#include "bsp_sys.h" + + + +#endif diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/moto.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/moto.c new file mode 100644 index 0000000..ed6c846 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/moto.c @@ -0,0 +1,130 @@ +/******************** (C) COPYRIGHT 2023 GeekRebot ***************************** +* File Name : moto.c +* Current Version : V1.0 & ST 3.5.0 +* Author : zhanli 719901725@qq.com +* Date of Issued : 2023.04.06 zhanli: Create +* Comments : ֱٵ +********************************************************************************/ +#include "moto.h" +#include "bsp_sys.h" +/**---------------------------------------------------------------------- +Ӳ˵ + +// +PB0 -> R_PWM +PB13-> R_IN2 +PB12-> R_IN1 + +PB1 -> L_PWM +PB14-> L_IN2 +PB15-> L_IN1 + +PA0 -> LA +PA1 -> LB + +// + +// +PA0---- A ߵB2Bʶ +PA1---- B ߵB2Aʶ + +// ҵ +PB6---- B ߵB1Aʶ +PB7---- A ߵB1Bʶ + +TB6612, СͷӦǰ, LeftӦA,RightӦB +*---------------------------------------------------------------------**/ + +//PWMtimer3 +void MOTO_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); /*GPIOʱ*/ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15; /*ѡҪƵGPIO*/ + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; /*ģʽΪͨ*/ + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; /*Ϊ50MHz */ + GPIO_Init(GPIOB, &GPIO_InitStructure); /*ÿ⺯ʼGPIO*/ +} + +// +void MOTO_Left(char state) +{ + if(state == GO)//ǰǰ + { + GPIO_SetBits(GPIOB,GPIO_Pin_12); + GPIO_SetBits(GPIOB,GPIO_Pin_14); + GPIO_SetBits(GPIOB,GPIO_Pin_15); + TIM3->CCR4=1500; + } + if(state == BACK)//ǰ + { + GPIO_ResetBits(GPIOB,GPIO_Pin_12); + GPIO_ResetBits(GPIOB,GPIO_Pin_14); + GPIO_ResetBits(GPIOB,GPIO_Pin_15); + TIM3->CCR4=1500; + } + if(state == STOP)//ͣת + { + TIM3->CCR4=0; //pwm + } +} + +//ҵ +void MOTO_Right(char state) +{ + if(state == GO)//ǰǰ + { + GPIO_SetBits(GPIOB,GPIO_Pin_13); + + TIM3->CCR3=1500; //pwm + } + if(state == BACK)//ǰ + { + GPIO_ResetBits(GPIOB,GPIO_Pin_13); + + TIM3->CCR3=1500; //pwm + } + if(state == STOP)//ͣת + { + TIM3->CCR3=0; //pwm + } +} + +//***************************ǰ***************************// +//ֻҪ()״̬ͿԸıת +void Car_Go(void) +{ + // ǰ //ҵ ǰ + MOTO_Left(GO); MOTO_Right(GO); +} + +void Car_Back(void) +{ + // //ҵ + MOTO_Left(BACK); MOTO_Right(BACK); +} + +//***************************תȦ***************************// +void Car_Turn_Left(void) +{ + // //ҵ ǰ + MOTO_Left(BACK); MOTO_Right(GO); +} + + +//***************************תȦ***************************// +void Car_Turn_Right(void) +{ + // ǰ //ҵ + MOTO_Left(GO); MOTO_Right(BACK); +} + +//***************************ͣ***************************// +void Car_Stop(void) +{ + MOTO_Left(STOP); + MOTO_Right(STOP); +} + + + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/moto.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/moto.h new file mode 100644 index 0000000..619740e --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/MOTO/moto.h @@ -0,0 +1,25 @@ +#ifndef __MOTO_H +#define __MOTO_H + +#include "stm32f10x.h" +//̼ķֵ +//Ӳ˵ +#define GO 0//״̬ ǰ +#define BACK 1// +#define STOP 2//ͣ + + + +// +void MOTO_Left(char state); +//ҵ +void MOTO_Right(char state); + +void MOTO_GPIO_Init(void); + +void Car_Go(void); +void Car_Back(void); +void Car_Turn_Right(void); +void Car_Turn_Left(void); +void Car_Stop(void); +#endif diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/OLED/bmp.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/OLED/bmp.h new file mode 100644 index 0000000..0775126 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/OLED/bmp.h @@ -0,0 +1,80 @@ +////////////////////////////////////////////////////////////////////////////////// +// +// +//洢ͼƬݣͼƬСΪ64*32 +// +///////////////////////////////////////////////////////////////////////////////// + +#ifndef __BMP_H +#define __BMP_H +unsigned char BMP1[] = +{0x00,0x06,0x0A,0xFE,0x0A,0xC6,0x00,0xE0,0x00,0xF0,0x00,0xF8,0x00,0x00,0x00,0x00, +0x00,0x00,0xFE,0x7D,0xBB,0xC7,0xEF,0xEF,0xEF,0xEF,0xEF,0xEF,0xEF,0xC7,0xBB,0x7D, +0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08, +0x0C,0xFE,0xFE,0x0C,0x08,0x20,0x60,0xFE,0xFE,0x60,0x20,0x00,0x00,0x00,0x78,0x48, +0xFE,0x82,0xBA,0xBA,0x82,0xBA,0xBA,0x82,0xBA,0xBA,0x82,0xBA,0xBA,0x82,0xFE,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFF, +0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0xFF,0xFF,0x00,0x00,0xFE,0xFF,0x03, +0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0xFF,0xFE,0x00,0x00,0x00,0x00,0xC0,0xC0, +0xC0,0x00,0x00,0x00,0x00,0xFE,0xFF,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03, +0xFF,0xFE,0x00,0x00,0xFE,0xFF,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0xFF, +0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x0C, +0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0xFF,0xFF,0x00,0x00,0x00,0x00,0xE1,0xE1, +0xE1,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0xFF,0xFF,0x00,0x00,0xFF,0xFF,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0xFF, +0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x1F, +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x0F,0x00,0x00,0x0F,0x1F,0x18, +0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x0F,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x0F,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18, +0x1F,0x0F,0x00,0x00,0x0F,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F, +0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x8C,0x42,0x22,0x12,0x0C,0x00,0xFC,0x02,0x02,0x02,0xFC,0x00,0x00,0x04, +0xFE,0x00,0x00,0x00,0x20,0x58,0x44,0xFE,0x40,0x00,0x10,0x10,0x10,0x10,0x10,0x00, +0x00,0x04,0xFE,0x00,0x00,0x00,0xFC,0x02,0x02,0x02,0xFC,0x00,0x10,0x10,0x10,0x10, +0x10,0x00,0xFC,0x02,0x02,0x02,0xFC,0x00,0x00,0x04,0xFE,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x24,0xA4,0x2E,0x24,0xE4,0x24,0x2E,0xA4,0x24,0x00,0x00,0x00,0xF8,0x4A,0x4C, +0x48,0xF8,0x48,0x4C,0x4A,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x01,0x01,0x01,0x00,0x00,0x00,0x01, +0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x01,0x01,0x01,0x00,0x00,0x00,0x01,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x01,0x01,0x01,0x00,0x00,0x00,0x01,0x01,0x01,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x20,0x10,0x10, +0x10,0x10,0x20,0xC0,0x00,0x00,0xC0,0x20,0x10,0x10,0x10,0x10,0x20,0xC0,0x00,0x00, +0x00,0x12,0x0A,0x07,0x02,0x7F,0x02,0x07,0x0A,0x12,0x00,0x00,0x00,0x0B,0x0A,0x0A, +0x0A,0x7F,0x0A,0x0A,0x0A,0x0B,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x40,0x40, +0x40,0x50,0x20,0x5F,0x80,0x00,0x1F,0x20,0x40,0x40,0x40,0x50,0x20,0x5F,0x80,0x00,/*"C:\Users\evk\Desktop\??2014.bmp",0*/ + +}; + +#endif + + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/OLED/oled.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/OLED/oled.c new file mode 100644 index 0000000..fedd293 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/OLED/oled.c @@ -0,0 +1,302 @@ +/* +******************************************************************************************************** +ļoled.c + ܣolediicʽ + ע + https://shop60670850.taobao.com + ߣlilianhe + : 2017-2-8 +********************************************************************************************************* +*/ + +/* +******************************************************************************************************** +־ +1.2017-2-8޸oledײ㣬ͨok +2.2017-2-8Ӳ޸ģSCL PA10SDA PA11 +********************************************************************************************************* +*/ +#include "oled.h" +#include "stdlib.h" +#include "oledfont.h" +#include "delay.h" +#include "bsp_iic.h" +//OLEDԴ +//Ÿʽ. +//[0]0 1 2 3 ... 127 +//[1]0 1 2 3 ... 127 +//[2]0 1 2 3 ... 127 +//[3]0 1 2 3 ... 127 +//[4]0 1 2 3 ... 127 +//[5]0 1 2 3 ... 127 +//[6]0 1 2 3 ... 127 +//[7]0 1 2 3 ... 127 + +void Write_IIC_Command(unsigned char IIC_Command) +{ + IIC_Start(); + IIC_Send_Byte(0x78); //Slave address,SA0=0 + IIC_Wait_Ack(); + IIC_Send_Byte(0x00); //write command + IIC_Wait_Ack(); + IIC_Send_Byte(IIC_Command); + IIC_Wait_Ack(); + IIC_Stop(); +} +/********************************************** +// IIC Write Data +**********************************************/ +void Write_IIC_Data(unsigned char IIC_Data) +{ + IIC_Start(); + IIC_Send_Byte(0x78); //D/C#=0; R/W#=0 + IIC_Wait_Ack(); + IIC_Send_Byte(0x40); //write data + IIC_Wait_Ack(); + IIC_Send_Byte(IIC_Data); + IIC_Wait_Ack(); + IIC_Stop(); +} +void OLED_WR_Byte(unsigned dat,unsigned cmd) +{ + if(cmd) + { + + Write_IIC_Data(dat); + + } + else { + Write_IIC_Command(dat); + + } + + +} + + +/******************************************** +// fill_Picture +********************************************/ +void fill_picture(unsigned char fill_Data) +{ + unsigned char m,n; + for(m=0;m<8;m++) + { + OLED_WR_Byte(0xb0+m,0); //page0-page1 + OLED_WR_Byte(0x00,0); //low column start address + OLED_WR_Byte(0x10,0); //high column start address + for(n=0;n<128;n++) + { + OLED_WR_Byte(fill_Data,1); + } + } +} + + +/***********************Delay****************************************/ +void Delay_50ms(unsigned int Del_50ms) +{ + unsigned int m; + for(;Del_50ms>0;Del_50ms--) + for(m=6245;m>0;m--); +} + +void Delay_1ms(unsigned int Del_1ms) +{ + unsigned char j; + while(Del_1ms--) + { + for(j=0;j<123;j++); + } +} + +// + +void OLED_Set_Pos(unsigned char x, unsigned char y) +{ + OLED_WR_Byte(0xb0+y,OLED_CMD); + OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD); + OLED_WR_Byte((x&0x0f),OLED_CMD); +} +//OLEDʾ +void OLED_Display_On(void) +{ + OLED_WR_Byte(0X8D,OLED_CMD); //SET DCDC + OLED_WR_Byte(0X14,OLED_CMD); //DCDC ON + OLED_WR_Byte(0XAF,OLED_CMD); //DISPLAY ON +} +//رOLEDʾ +void OLED_Display_Off(void) +{ + OLED_WR_Byte(0X8D,OLED_CMD); //SET DCDC + OLED_WR_Byte(0X10,OLED_CMD); //DCDC OFF + OLED_WR_Byte(0XAE,OLED_CMD); //DISPLAY OFF +} +//,,ĻǺɫ!ûһ!!! +void OLED_Clear(void) +{ + u8 i,n; + for(i=0;i<8;i++) + { + OLED_WR_Byte (0xb0+i,OLED_CMD); //ҳַ0~7 + OLED_WR_Byte (0x00,OLED_CMD); //ʾλáе͵ַ + OLED_WR_Byte (0x10,OLED_CMD); //ʾλáиߵַ + for(n=0;n<128;n++)OLED_WR_Byte(0,OLED_DATA); + } //ʾ +} +void OLED_On(void) +{ + u8 i,n; + for(i=0;i<8;i++) + { + OLED_WR_Byte (0xb0+i,OLED_CMD); //ҳַ0~7 + OLED_WR_Byte (0x00,OLED_CMD); //ʾλáе͵ַ + OLED_WR_Byte (0x10,OLED_CMD); //ʾλáиߵַ + for(n=0;n<128;n++)OLED_WR_Byte(1,OLED_DATA); + } //ʾ +} +//ָλʾһַ,ַ +//x:0~127 +//y:0~63 +//mode:0,ʾ;1,ʾ +//size:ѡ 16/12 +void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size) +{ + unsigned char c=0,i=0; + c=chr-' ';//õƫƺֵ + if(x>Max_Column-1){x=0;y=y+2;} + if(Char_Size ==16) + { + OLED_Set_Pos(x,y); + for(i=0;i<8;i++) + OLED_WR_Byte(F8X16[c*16+i],OLED_DATA); + OLED_Set_Pos(x,y+1); + for(i=0;i<8;i++) + OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA); + } + else { + OLED_Set_Pos(x,y); + for(i=0;i<6;i++) + OLED_WR_Byte(F6x8[c][i],OLED_DATA); + + } +} +//m^n +u32 oled_pow(u8 m,u8 n) +{ + u32 result=1; + while(n--)result*=m; + return result; +} +//ʾ2 +//x,y : +//len :ֵλ +//size:С +//mode:ģʽ 0,ģʽ;1,ģʽ +//num:ֵ(0~4294967295); +void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size2) +{ + u8 t,temp; + u8 enshow=0; + for(t=0;t120){x=0;y+=2;} + j++; + } +} +//ʾ +void OLED_ShowCHinese(u8 x,u8 y,u8 no) +{ + u8 t,adder=0; + OLED_Set_Pos(x,y); + for(t=0;t<16;t++) + { + OLED_WR_Byte(Hzk[2*no][t],OLED_DATA); + adder+=1; + } + OLED_Set_Pos(x,y+1); + for(t=0;t<16;t++) + { + OLED_WR_Byte(Hzk[2*no+1][t],OLED_DATA); + adder+=1; + } +} +/***********ʾʾBMPͼƬ12864ʼ(x,y),xķΧ0127yΪҳķΧ07*****************/ +void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]) +{ + unsigned int j=0; + unsigned char x,y; + if(y1%8==0) y=y1/8; + else y=y1/8+1; + for(y=y0;y +0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ? +0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @ +0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A +0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B +0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C +0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D +0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E +0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F +0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G +0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H +0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I +0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J +0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K +0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L +0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M +0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N +0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O +0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P +0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q +0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R +0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S +0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T +0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U +0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V +0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W +0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X +0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y +0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z +0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [ +0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55 +0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ] +0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^ +0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _ +0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// ' +0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a +0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b +0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c +0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d +0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e +0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f +0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g +0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h +0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i +0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j +0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k +0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l +0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m +0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n +0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o +0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p +0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q +0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r +0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s +0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t +0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u +0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v +0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w +0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x +0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y +0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z +0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines +}; +/****************************************8*16ĵ************************************/ +const unsigned char F8X16[]= +{ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0 + 0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1 + 0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2 + 0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3 + 0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4 + 0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5 + 0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6 + 0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7 + 0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8 + 0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9 + 0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10 + 0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11 + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12 + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13 + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14 + 0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15 + 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16 + 0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17 + 0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18 + 0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19 + 0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20 + 0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21 + 0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22 + 0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23 + 0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24 + 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25 + 0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26 + 0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27 + 0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28 + 0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29 + 0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30 + 0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31 + 0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32 + 0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33 + 0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34 + 0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35 + 0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36 + 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37 + 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38 + 0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39 + 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40 + 0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41 + 0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42 + 0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43 + 0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44 + 0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45 + 0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46 + 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47 + 0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48 + 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49 + 0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50 + 0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51 + 0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52 + 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53 + 0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54 + 0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55 + 0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56 + 0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57 + 0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58 + 0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59 + 0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60 + 0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61 + 0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62 + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63 + 0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64 + 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65 + 0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66 + 0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67 + 0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68 + 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69 + 0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70 + 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71 + 0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72 + 0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73 + 0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74 + 0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75 + 0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76 + 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77 + 0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78 + 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79 + 0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80 + 0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81 + 0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82 + 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83 + 0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84 + 0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85 + 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86 + 0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87 + 0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88 + 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89 + 0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90 + 0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91 + 0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92 + 0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93 + 0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94 +}; +char Hzk[][32]={ + +/*-- : --*/ +/*-- 12; ¶ӦĵΪx=16x16 --*/ +{0x40,0x40,0x42,0xCC,0x00,0x40,0xA0,0x9E,0x82,0x82,0x82,0x9E,0xA0,0x20,0x20,0x00}, +{0x00,0x00,0x00,0x3F,0x90,0x88,0x40,0x43,0x2C,0x10,0x28,0x46,0x41,0x80,0x80,0x00}, + +/*-- : --*/ +/*-- 12; ¶ӦĵΪx=16x16 --*/ +{0x10,0x0C,0x44,0x44,0x44,0x44,0x45,0xC6,0x44,0x44,0x44,0x44,0x44,0x14,0x0C,0x00}, +{0x80,0x40,0x20,0x1E,0x20,0x40,0x40,0x7F,0x44,0x44,0x44,0x44,0x44,0x40,0x40,0x00}, + +/*-- : --*/ +/*-- 12; ¶ӦĵΪx=16x16 --*/ +{0x00,0x08,0x88,0x48,0x28,0x18,0x0F,0xE8,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00}, +{0x08,0x08,0x09,0x09,0x09,0x09,0x09,0xFF,0x09,0x09,0x09,0x09,0x09,0x08,0x08,0x00}, + +/*-- : --*/ +/*-- 12; ¶ӦĵΪx=16x16 --*/ +{0x40,0x40,0x42,0xCC,0x00,0x04,0xF4,0x94,0x94,0xFF,0x94,0x94,0xF4,0x04,0x00,0x00}, +{0x00,0x40,0x20,0x1F,0x20,0x48,0x44,0x42,0x41,0x5F,0x41,0x42,0x44,0x48,0x40,0x00}, + +/*-- : --*/ +/*-- 12; ¶ӦĵΪx=16x16 --*/ +{0x08,0x08,0x08,0x08,0x88,0x78,0x0F,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00}, +{0x20,0x10,0x48,0x46,0x41,0x41,0x41,0x41,0x7F,0x41,0x41,0x41,0x41,0x40,0x40,0x00}, + +/*-- : --*/ +/*-- 12; ¶ӦĵΪx=16x16 --*/ +{0x08,0x08,0x08,0x08,0xC8,0x38,0x0F,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x00}, +{0x08,0x04,0x02,0x01,0xFF,0x41,0x41,0x41,0x41,0x41,0x41,0x41,0xFF,0x00,0x00,0x00}, + +/*-- : --*/ +/*-- 12; ¶ӦĵΪx=16x16 --*/ +{0xC8,0xB8,0x8F,0xE8,0x88,0xC8,0x20,0x90,0x0C,0x03,0x0C,0x90,0x20,0x40,0x40,0x00}, +{0x08,0x18,0x08,0xFF,0x04,0x04,0x00,0x3F,0x44,0x42,0x41,0x40,0x40,0x70,0x00,0x00}, + +/*-- : --*/ +/*-- 12; ¶ӦĵΪx=16x16 --*/ +{0x00,0x00,0xFC,0x24,0x24,0x24,0xFC,0x25,0x26,0x24,0xFC,0x24,0x24,0x24,0x04,0x00}, +{0x40,0x30,0x8F,0x80,0x84,0x4C,0x55,0x25,0x25,0x25,0x55,0x4C,0x80,0x80,0x80,0x00}, + + + +}; + +#endif + + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/PID/pid.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/PID/pid.c new file mode 100644 index 0000000..d1d73bb --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/PID/pid.c @@ -0,0 +1,71 @@ +/******************** (C) COPYRIGHT 2023 GeekRebot ***************************** +* File Name : pid.c +* Current Version : V1.0 & ST 3.5.0 +* Author : zhanli 719901725@qq.com +* Date of Issued : 2023.04.06 zhanli: Create +* Comments : GeekRebotĵPIDƲ +********************************************************************************/ +#include "pid.h" + +/* ʽpid,PIDغ,趨ԵӰdz */ +float Proportion = 0.6; // Proportional Const +float Integral = 0.1; // ֳ Integral Const +float Derivative = 0; // ΢ֳ Derivative Const + +//ʾpidOLED +void showPID(void) +{ + float temp1,temp2,temp3; + char PID_P[3],PID_I[3],PID_D[3]; + temp1 = Proportion; + sprintf(PID_P,"%1.1f",temp1); + OLED_ShowString(16,4, (u8*)PID_P,16); + + temp2 = Integral; + sprintf(PID_I,"%1.1f",temp2); + OLED_ShowString(56,4, (u8*)PID_I,16); + + temp3 = Derivative; + sprintf(PID_D,"%1.1f",temp3); + OLED_ShowString(104,4, (u8*)PID_D,16); +} + +/********************ʽPID************************************/ +//NextPointǰֵ +//SetPoint趨ֵ + +//PID +int PID_Calc_Left(int NextPoint,int SetPoint) +{ + static int LastError; // Error[-1] + static int PrevError; // Error[-2] + int iError,Outpid; // ǰ + + iError=SetPoint-NextPoint; // + Outpid=(Proportion * iError) // E[k] + -(Integral * LastError) // E[k-1] + +(Derivative * PrevError); // E[k-2] + + PrevError=LastError; // 洢´μ + LastError=iError; + return(Outpid); // ֵ +} + + +//PID +int PID_Calc_Right(int NextPoint,int SetPoint) +{ + static int LastError; // Error[-1] + static int PrevError; // Error[-2] + int iError,Outpid; // ǰ + + iError = SetPoint-NextPoint; // + Outpid = (Proportion * iError) // E[k] + -(Integral * LastError) // E[k-1] + +(Derivative * PrevError); // E[k-2] + + PrevError=LastError; // 洢´μ + LastError=iError; + return(Outpid); // ֵ +} + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/PID/pid.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/PID/pid.h new file mode 100644 index 0000000..8b7902c --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/HARDWARE/PID/pid.h @@ -0,0 +1,10 @@ +#ifndef __PID_H +#define __PID_H + +#include "stm32f10x.h" +#include "bsp_sys.h" +int PID_Calc_Left(int NextPoint,int Setpoint); +int PID_Calc_Right(int NextPoint,int Setpoint); +void showPID(void); +#endif + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/core_cm3.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/core_cm3.c new file mode 100644 index 0000000..fcff0d1 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/core_cm3.c @@ -0,0 +1,784 @@ +/**************************************************************************//** + * @file core_cm3.c + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Source File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#include + +/* define compiler specific symbols */ +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +__ASM uint32_t __get_PSP(void) +{ + mrs r0, psp + bx lr +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +__ASM void __set_PSP(uint32_t topOfProcStack) +{ + msr psp, r0 + bx lr +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +__ASM uint32_t __get_MSP(void) +{ + mrs r0, msp + bx lr +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +__ASM void __set_MSP(uint32_t mainStackPointer) +{ + msr msp, r0 + bx lr +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +__ASM uint32_t __REV16(uint16_t value) +{ + rev16 r0, r0 + bx lr +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +__ASM int32_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +__ASM void __CLREX(void) +{ + clrex +} + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +__ASM uint32_t __get_BASEPRI(void) +{ + mrs r0, basepri + bx lr +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +__ASM void __set_BASEPRI(uint32_t basePri) +{ + msr basepri, r0 + bx lr +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +__ASM uint32_t __get_PRIMASK(void) +{ + mrs r0, primask + bx lr +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +__ASM void __set_PRIMASK(uint32_t priMask) +{ + msr primask, r0 + bx lr +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +__ASM uint32_t __get_FAULTMASK(void) +{ + mrs r0, faultmask + bx lr +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +__ASM void __set_FAULTMASK(uint32_t faultMask) +{ + msr faultmask, r0 + bx lr +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +__ASM uint32_t __get_CONTROL(void) +{ + mrs r0, control + bx lr +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +__ASM void __set_CONTROL(uint32_t control) +{ + msr control, r0 + bx lr +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ +#pragma diag_suppress=Pe940 + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) +{ + __ASM("mrs r0, psp"); + __ASM("bx lr"); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM("msr psp, r0"); + __ASM("bx lr"); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) +{ + __ASM("mrs r0, msp"); + __ASM("bx lr"); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM("msr msp, r0"); + __ASM("bx lr"); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + __ASM("rev16 r0, r0"); + __ASM("bx lr"); +} + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +uint32_t __RBIT(uint32_t value) +{ + __ASM("rbit r0, r0"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit values) + */ +uint8_t __LDREXB(uint8_t *addr) +{ + __ASM("ldrexb r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +uint16_t __LDREXH(uint16_t *addr) +{ + __ASM("ldrexh r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +uint32_t __LDREXW(uint32_t *addr) +{ + __ASM("ldrex r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +uint32_t __STREXB(uint8_t value, uint8_t *addr) +{ + __ASM("strexb r0, r0, [r1]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +uint32_t __STREXH(uint16_t value, uint16_t *addr) +{ + __ASM("strexh r0, r0, [r1]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +uint32_t __STREXW(uint32_t value, uint32_t *addr) +{ + __ASM("strex r0, r0, [r1]"); + __ASM("bx lr"); +} + +#pragma diag_default=Pe940 + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) __attribute__( ( naked ) ); +uint32_t __get_PSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, psp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) ); +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0\n\t" + "BX lr \n\t" : : "r" (topOfProcStack) ); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) __attribute__( ( naked ) ); +uint32_t __get_MSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, msp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) ); +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0\n\t" + "BX lr \n\t" : : "r" (topOfMainStack) ); +} + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +uint32_t __get_BASEPRI(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, basepri_max" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +void __set_BASEPRI(uint32_t value) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (value) ); +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +uint32_t __get_PRIMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) ); +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +uint32_t __get_FAULTMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) ); +} + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +uint32_t __get_CONTROL(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) ); +} + + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +uint32_t __REV(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +int32_t __REVSH(int16_t value) +{ + uint32_t result=0; + + __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +uint32_t __RBIT(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit value + */ +uint8_t __LDREXB(uint8_t *addr) +{ + uint8_t result=0; + + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +uint16_t __LDREXH(uint16_t *addr) +{ + uint16_t result=0; + + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +uint32_t __LDREXW(uint32_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +uint32_t __STREXB(uint8_t value, uint8_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +uint32_t __STREXH(uint16_t value, uint16_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +uint32_t __STREXW(uint32_t value, uint32_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/core_cm3.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/core_cm3.h new file mode 100644 index 0000000..7ab7b4b --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/core_cm3.h @@ -0,0 +1,1818 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#ifndef __CM3_CORE_H__ +#define __CM3_CORE_H__ + +/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration + * + * List of Lint messages which will be suppressed and not shown: + * - Error 10: \n + * register uint32_t __regBasePri __asm("basepri"); \n + * Error 10: Expecting ';' + * . + * - Error 530: \n + * return(__regBasePri); \n + * Warning 530: Symbol '__regBasePri' (line 264) not initialized + * . + * - Error 550: \n + * __regBasePri = (basePri & 0x1ff); \n + * Warning 550: Symbol '__regBasePri' (line 271) not accessed + * . + * - Error 754: \n + * uint32_t RESERVED0[24]; \n + * Info 754: local structure member '' (line 109, file ./cm3_core.h) not referenced + * . + * - Error 750: \n + * #define __CM3_CORE_H__ \n + * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced + * . + * - Error 528: \n + * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n + * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced + * . + * - Error 751: \n + * } InterruptType_Type; \n + * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced + * . + * Note: To re-enable a Message, insert a space before 'lint' * + * + */ + +/*lint -save */ +/*lint -e10 */ +/*lint -e530 */ +/*lint -e550 */ +/*lint -e754 */ +/*lint -e750 */ +/*lint -e528 */ +/*lint -e751 */ + + +/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions + This file defines all structures and symbols for CMSIS core: + - CMSIS version number + - Cortex-M core registers and bitfields + - Cortex-M core peripheral base address + @{ + */ + +#ifdef __cplusplus + extern "C" { +#endif + +#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x03) /*!< Cortex core */ + +#include /* Include standard types */ + +#if defined (__ICCARM__) + #include /* IAR Intrinsics */ +#endif + + +#ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */ +#endif + + + + +/** + * IO definitions + * + * define access restrictions to peripheral registers + */ + +#ifdef __cplusplus + #define __I volatile /*!< defines 'read only' permissions */ +#else + #define __I volatile const /*!< defines 'read only' permissions */ +#endif +#define __O volatile /*!< defines 'write only' permissions */ +#define __IO volatile /*!< defines 'read / write' permissions */ + + + +/******************************************************************************* + * Register Abstraction + ******************************************************************************/ +/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register + @{ +*/ + + +/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC + memory mapped structure for Nested Vectored Interrupt Controller (NVIC) + @{ + */ +typedef struct +{ + __IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */ +} NVIC_Type; +/*@}*/ /* end of group CMSIS_CM3_NVIC */ + + +/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB + memory mapped structure for System Control Block (SCB) + @{ + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (0x1FFul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Registers Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Registers Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ +/*@}*/ /* end of group CMSIS_CM3_SCB */ + + +/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick + memory mapped structure for SysTick + @{ + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ +/*@}*/ /* end of group CMSIS_CM3_SysTick */ + + +/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM + memory mapped structure for Instrumentation Trace Macrocell (ITM) + @{ + */ +typedef struct +{ + __O union + { + __O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */ + } PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */ + __IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */ + __IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ +/*@}*/ /* end of group CMSIS_CM3_ITM */ + + +/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type + memory mapped structure for Interrupt Type + @{ + */ +typedef struct +{ + uint32_t RESERVED0; + __I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */ +#if ((defined __CM3_REV) && (__CM3_REV >= 0x200)) + __IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */ +#else + uint32_t RESERVED1; +#endif +} InterruptType_Type; + +/* Interrupt Controller Type Register Definitions */ +#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */ +#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */ +#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */ + +#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */ +#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */ + +#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */ +#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */ +/*@}*/ /* end of group CMSIS_CM3_InterruptType */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) +/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU + memory mapped structure for Memory Protection Unit (MPU) + @{ + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */ +#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */ + +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */ +#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */ + +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */ +#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */ + +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */ +#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */ + +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */ +#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */ + +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */ +#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@}*/ /* end of group CMSIS_CM3_MPU */ +#endif + + +/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug + memory mapped structure for Core Debug Register + @{ + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +/*@}*/ /* end of group CMSIS_CM3_CoreDebug */ + + +/* Memory mapping of Cortex-M3 Hardware */ +#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000) /*!< ITM Base Address */ +#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */ + +#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */ +#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */ +#endif + +/*@}*/ /* end of group CMSIS_CM3_core_register */ + + +/******************************************************************************* + * Hardware Abstraction Layer + ******************************************************************************/ + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#define __enable_fault_irq __enable_fiq +#define __disable_fault_irq __disable_fiq + +#define __NOP __nop +#define __WFI __wfi +#define __WFE __wfe +#define __SEV __sev +#define __ISB() __isb(0) +#define __DSB() __dsb(0) +#define __DMB() __dmb(0) +#define __REV __rev +#define __RBIT __rbit +#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr)) +#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr)) +#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr)) +#define __STREXB(value, ptr) __strex(value, ptr) +#define __STREXH(value, ptr) __strex(value, ptr) +#define __STREXW(value, ptr) __strex(value, ptr) + + +/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */ +/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */ +/* intrinsic void __enable_irq(); */ +/* intrinsic void __disable_irq(); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +extern void __CLREX(void); + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +extern uint32_t __get_BASEPRI(void); + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +extern void __set_BASEPRI(uint32_t basePri); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +extern uint32_t __get_FAULTMASK(void); + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +extern void __set_FAULTMASK(uint32_t faultMask); + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +#else /* (__ARMCC_VERSION >= 400000) */ + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +#define __CLREX __clrex + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +static __INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +static __INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xff); +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +static __INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +static __INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +static __INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +static __INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & 1); +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +static __INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +static __INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#define __enable_irq __enable_interrupt /*!< global Interrupt enable */ +#define __disable_irq __disable_interrupt /*!< global Interrupt disable */ + +static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); } + +#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */ +static __INLINE void __WFI() { __ASM ("wfi"); } +static __INLINE void __WFE() { __ASM ("wfe"); } +static __INLINE void __SEV() { __ASM ("sev"); } +static __INLINE void __CLREX() { __ASM ("clrex"); } + +/* intrinsic void __ISB(void) */ +/* intrinsic void __DSB(void) */ +/* intrinsic void __DMB(void) */ +/* intrinsic void __set_PRIMASK(); */ +/* intrinsic void __get_PRIMASK(); */ +/* intrinsic void __set_FAULTMASK(); */ +/* intrinsic void __get_FAULTMASK(); */ +/* intrinsic uint32_t __REV(uint32_t value); */ +/* intrinsic uint32_t __REVSH(uint32_t value); */ +/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */ +/* intrinsic unsigned long __LDREX(unsigned long *); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +extern uint32_t __RBIT(uint32_t value); + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit values) + */ +extern uint8_t __LDREXB(uint8_t *addr); + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +extern uint16_t __LDREXH(uint16_t *addr); + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +extern uint32_t __LDREXW(uint32_t *addr); + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +extern uint32_t __STREXB(uint8_t value, uint8_t *addr); + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +extern uint32_t __STREXH(uint16_t value, uint16_t *addr); + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +extern uint32_t __STREXW(uint32_t value, uint32_t *addr); + + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +static __INLINE void __enable_irq() { __ASM volatile ("cpsie i"); } +static __INLINE void __disable_irq() { __ASM volatile ("cpsid i"); } + +static __INLINE void __enable_fault_irq() { __ASM volatile ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM volatile ("cpsid f"); } + +static __INLINE void __NOP() { __ASM volatile ("nop"); } +static __INLINE void __WFI() { __ASM volatile ("wfi"); } +static __INLINE void __WFE() { __ASM volatile ("wfe"); } +static __INLINE void __SEV() { __ASM volatile ("sev"); } +static __INLINE void __ISB() { __ASM volatile ("isb"); } +static __INLINE void __DSB() { __ASM volatile ("dsb"); } +static __INLINE void __DMB() { __ASM volatile ("dmb"); } +static __INLINE void __CLREX() { __ASM volatile ("clrex"); } + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +extern uint32_t __get_BASEPRI(void); + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +extern void __set_BASEPRI(uint32_t basePri); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +extern uint32_t __get_FAULTMASK(void); + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +extern void __set_FAULTMASK(uint32_t faultMask); + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +extern uint32_t __REV(uint32_t value); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +extern uint32_t __RBIT(uint32_t value); + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit value + */ +extern uint8_t __LDREXB(uint8_t *addr); + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +extern uint16_t __LDREXH(uint16_t *addr); + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +extern uint32_t __LDREXW(uint32_t *addr); + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +extern uint32_t __STREXB(uint8_t value, uint8_t *addr); + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +extern uint32_t __STREXH(uint16_t value, uint16_t *addr); + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +extern uint32_t __STREXW(uint32_t value, uint32_t *addr); + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif + + +/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface + Core Function Interface containing: + - Core NVIC Functions + - Core SysTick Functions + - Core Reset Functions +*/ +/*@{*/ + +/* ########################## NVIC functions #################################### */ + +/** + * @brief Set the Priority Grouping in NVIC Interrupt Controller + * + * @param PriorityGroup is priority grouping field + * + * Set the priority grouping field using the required unlock sequence. + * The parameter priority_grouping is assigned to the field + * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + */ +static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + (0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + +/** + * @brief Get the Priority Grouping from NVIC Interrupt Controller + * + * @return priority grouping field + * + * Get the priority grouping from NVIC Interrupt Controller. + * priority grouping is SCB->AIRCR [10:8] PRIGROUP field. + */ +static __INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ +} + +/** + * @brief Enable Interrupt in NVIC Interrupt Controller + * + * @param IRQn The positive number of the external interrupt to enable + * + * Enable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ +} + +/** + * @brief Disable the interrupt line for external interrupt specified + * + * @param IRQn The positive number of the external interrupt to disable + * + * Disable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + +/** + * @brief Read the interrupt pending bit for a device specific interrupt source + * + * @param IRQn The number of the device specifc interrupt + * @return 1 = interrupt pending, 0 = interrupt not pending + * + * Read the pending register in NVIC and return 1 if its status is pending, + * otherwise it returns 0 + */ +static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + +/** + * @brief Set the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for set pending + * + * Set the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + +/** + * @brief Clear the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for clear pending + * + * Clear the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + +/** + * @brief Read the active bit for an external interrupt + * + * @param IRQn The number of the interrupt for read active bit + * @return 1 = interrupt active, 0 = interrupt not active + * + * Read the active register in NVIC and returns 1 if its status is active, + * otherwise it returns 0. + */ +static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ +} + +/** + * @brief Set the priority for an interrupt + * + * @param IRQn The number of the interrupt for set priority + * @param priority The priority to set + * + * Set the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */ + else { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ +} + +/** + * @brief Read the priority for an interrupt + * + * @param IRQn The number of the interrupt for get priority + * @return The priority for the interrupt + * + * Read the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * The returned priority value is automatically aligned to the implemented + * priority bits of the microcontroller. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */ + else { + return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** + * @brief Encode the priority for an interrupt + * + * @param PriorityGroup The used priority group + * @param PreemptPriority The preemptive priority value (starting from 0) + * @param SubPriority The sub priority value (starting from 0) + * @return The encoded priority for the interrupt + * + * Encode the priority for an interrupt with the given priority group, + * preemptive priority value and sub priority value. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + * + * The returned priority value can be used for NVIC_SetPriority(...) function + */ +static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits )) - 1))) + ); +} + + +/** + * @brief Decode the priority of an interrupt + * + * @param Priority The priority for the interrupt + * @param PriorityGroup The used priority group + * @param pPreemptPriority The preemptive priority value (starting from 0) + * @param pSubPriority The sub priority value (starting from 0) + * + * Decode an interrupt priority value with the given priority group to + * preemptive priority value and sub priority value. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + * + * The priority value can be retrieved with NVIC_GetPriority(...) function + */ +static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); +} + + + +/* ################################## SysTick function ############################################ */ + +#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0) + +/** + * @brief Initialize and start the SysTick counter and its interrupt. + * + * @param ticks number of ticks between two interrupts + * @return 1 = failed, 0 = successful + * + * Initialise the system tick timer and its interrupt and start the + * system tick timer / counter in free running mode to generate + * periodical interrupts. + */ +static __INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + + + + +/* ################################## Reset function ############################################ */ + +/** + * @brief Initiate a system reset request. + * + * Initiate a system reset request to reset the MCU + */ +static __INLINE void NVIC_SystemReset(void) +{ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */ + + + +/* ##################################### Debug In/Output function ########################################### */ + +/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface + Core Debug Interface containing: + - Core Debug Receive / Transmit Functions + - Core Debug Defines + - Core Debug Variables +*/ +/*@{*/ + +extern volatile int ITM_RxBuffer; /*!< variable to receive characters */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */ + + +/** + * @brief Outputs a character via the ITM channel 0 + * + * @param ch character to output + * @return character to output + * + * The function outputs a character via the ITM channel 0. + * The function returns when no debugger is connected that has booked the output. + * It is blocking when a debugger is connected, but the previous character send is not transmitted. + */ +static __INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */ + (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0); + ITM->PORT[0].u8 = (uint8_t) ch; + } + return (ch); +} + + +/** + * @brief Inputs a character via variable ITM_RxBuffer + * + * @return received character, -1 = no character received + * + * The function inputs a character via variable ITM_RxBuffer. + * The function returns when no debugger is connected that has booked the output. + * It is blocking when a debugger is connected, but the previous character send is not transmitted. + */ +static __INLINE int ITM_ReceiveChar (void) { + int ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + * @brief Check if a character via variable ITM_RxBuffer is available + * + * @return 1 = character available, 0 = no character available + * + * The function checks variable ITM_RxBuffer whether a character is available or not. + * The function returns '1' if a character is available and '0' if no character is available. + */ +static __INLINE int ITM_CheckChar (void) { + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { + return (0); /* no character available */ + } else { + return (1); /* character available */ + } +} + +/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */ + + +#ifdef __cplusplus +} +#endif + +/*@}*/ /* end of group CMSIS_CM3_core_definitions */ + +#endif /* __CM3_CORE_H__ */ + +/*lint -restore */ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_cl.s b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_cl.s new file mode 100644 index 0000000..833ece4 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_cl.s @@ -0,0 +1,368 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_cl.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x Connectivity line devices vector table for MDK-ARM +;* toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1 and ADC2 + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_IRQHandler ; TIM1 Break + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C1 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC alarm through EXTI line + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_IRQHandler ; TIM6 + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5 + DCD ETH_IRQHandler ; Ethernet + DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line + DCD CAN2_TX_IRQHandler ; CAN2 TX + DCD CAN2_RX0_IRQHandler ; CAN2 RX0 + DCD CAN2_RX1_IRQHandler ; CAN2 RX1 + DCD CAN2_SCE_IRQHandler ; CAN2 SCE + DCD OTG_FS_IRQHandler ; USB OTG FS +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT CAN1_TX_IRQHandler [WEAK] + EXPORT CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT OTG_FS_WKUP_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT ETH_IRQHandler [WEAK] + EXPORT ETH_WKUP_IRQHandler [WEAK] + EXPORT CAN2_TX_IRQHandler [WEAK] + EXPORT CAN2_RX0_IRQHandler [WEAK] + EXPORT CAN2_RX1_IRQHandler [WEAK] + EXPORT CAN2_SCE_IRQHandler [WEAK] + EXPORT OTG_FS_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +CAN1_TX_IRQHandler +CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +OTG_FS_WKUP_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +ETH_IRQHandler +ETH_WKUP_IRQHandler +CAN2_TX_IRQHandler +CAN2_RX0_IRQHandler +CAN2_RX1_IRQHandler +CAN2_SCE_IRQHandler +OTG_FS_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_hd.s b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_hd.s new file mode 100644 index 0000000..8a19827 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_hd.s @@ -0,0 +1,358 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_hd.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x High Density Devices vector table for MDK-ARM +;* toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system and also configure the external +;* SRAM mounted on STM3210E-EVAL board to be used as data +;* memory (optional, to be enabled by user) +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1 & ADC2 + DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX + DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_IRQHandler ; TIM1 Break + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend + DCD TIM8_BRK_IRQHandler ; TIM8 Break + DCD TIM8_UP_IRQHandler ; TIM8 Update + DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD ADC3_IRQHandler ; ADC3 + DCD FSMC_IRQHandler ; FSMC + DCD SDIO_IRQHandler ; SDIO + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_IRQHandler ; TIM6 + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 + DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + EXPORT TIM8_BRK_IRQHandler [WEAK] + EXPORT TIM8_UP_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT ADC3_IRQHandler [WEAK] + EXPORT FSMC_IRQHandler [WEAK] + EXPORT SDIO_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_5_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN1_TX_IRQHandler +USB_LP_CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +USBWakeUp_IRQHandler +TIM8_BRK_IRQHandler +TIM8_UP_IRQHandler +TIM8_TRG_COM_IRQHandler +TIM8_CC_IRQHandler +ADC3_IRQHandler +FSMC_IRQHandler +SDIO_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_5_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_hd_vl.s b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_hd_vl.s new file mode 100644 index 0000000..2768298 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_hd_vl.s @@ -0,0 +1,346 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_hd_vl.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x High Density Value Line Devices vector table +;* for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system and also configure the external +;* SRAM mounted on STM32100E-EVAL board to be used as data +;* memory (optional, to be enabled by user) +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD CEC_IRQHandler ; HDMI-CEC + DCD TIM12_IRQHandler ; TIM12 + DCD TIM13_IRQHandler ; TIM13 + DCD TIM14_IRQHandler ; TIM14 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 + DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT TIM12_IRQHandler [WEAK] + EXPORT TIM13_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_5_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +CEC_IRQHandler +TIM12_IRQHandler +TIM13_IRQHandler +TIM14_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_5_IRQHandler +DMA2_Channel5_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_ld.s b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_ld.s new file mode 100644 index 0000000..f18be4b --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_ld.s @@ -0,0 +1,297 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_ld.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x Low Density Devices vector table for MDK-ARM +;* toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1_2 + DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX + DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_IRQHandler ; TIM1 Break + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD 0 ; Reserved + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler routine +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN1_TX_IRQHandler +USB_LP_CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI1_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +USBWakeUp_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_ld_vl.s b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_ld_vl.s new file mode 100644 index 0000000..f7240dc --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_ld_vl.s @@ -0,0 +1,304 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_ld_vl.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x Low Density Value Line Devices vector table +;* for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD 0 ; Reserved + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SPI1_IRQHandler ; SPI1 + DCD 0 ; Reserved + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD 0 ; Reserved + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD CEC_IRQHandler ; HDMI-CEC + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun + DCD TIM7_IRQHandler ; TIM7 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +SPI1_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +CEC_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_md.s b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_md.s new file mode 100644 index 0000000..74da96c --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_md.s @@ -0,0 +1,307 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_md.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x Medium Density Devices vector table for MDK-ARM +;* toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1_2 + DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX + DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_IRQHandler ; TIM1 Break + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN1_TX_IRQHandler +USB_LP_CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +USBWakeUp_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_md_vl.s b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_md_vl.s new file mode 100644 index 0000000..076aa7f --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_md_vl.s @@ -0,0 +1,315 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_md_vl.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x Medium Density Value Line Devices vector table +;* for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15 + DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16 + DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD CEC_IRQHandler ; HDMI-CEC + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun + DCD TIM7_IRQHandler ; TIM7 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM16_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM15_IRQHandler +TIM1_UP_TIM16_IRQHandler +TIM1_TRG_COM_TIM17_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +CEC_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_xl.s b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_xl.s new file mode 100644 index 0000000..9fbc640 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/startup/startup_stm32f10x_xl.s @@ -0,0 +1,358 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_xl.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x XL-Density Devices vector table for MDK-ARM +;* toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system and also configure the external +;* SRAM mounted on STM3210E-EVAL board to be used as data +;* memory (optional, to be enabled by user) +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1 & ADC2 + DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX + DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend + DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 + DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 + DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD ADC3_IRQHandler ; ADC3 + DCD FSMC_IRQHandler ; FSMC + DCD SDIO_IRQHandler ; SDIO + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_IRQHandler ; TIM6 + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 + DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM10_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK] + EXPORT TIM8_UP_TIM13_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT ADC3_IRQHandler [WEAK] + EXPORT FSMC_IRQHandler [WEAK] + EXPORT SDIO_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_5_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN1_TX_IRQHandler +USB_LP_CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM9_IRQHandler +TIM1_UP_TIM10_IRQHandler +TIM1_TRG_COM_TIM11_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +USBWakeUp_IRQHandler +TIM8_BRK_TIM12_IRQHandler +TIM8_UP_TIM13_IRQHandler +TIM8_TRG_COM_TIM14_IRQHandler +TIM8_CC_IRQHandler +ADC3_IRQHandler +FSMC_IRQHandler +SDIO_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_5_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/stm32f10x.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/stm32f10x.h new file mode 100644 index 0000000..7e3b08d --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/stm32f10x.h @@ -0,0 +1,8337 @@ +/** + ****************************************************************************** + * @file stm32f10x.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F10x Connectivity line, + * High density, High density value line, Medium density, + * Medium density Value line, Low density, Low density Value line + * and XL-density devices. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The device used in the target application + * - To use or not the peripherals drivers in application code(i.e. + * code will be based on direct access to peripherals registers + * rather than drivers API), this option is controlled by + * "#define USE_STDPERIPH_DRIVER" + * - To change few application-specific parameters such as the HSE + * crystal frequency + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripherals registers hardware + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x + * @{ + */ + +#ifndef __STM32F10x_H +#define __STM32F10x_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Library_configuration_section + * @{ + */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ + + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) + /* #define STM32F10X_LD */ /*!< STM32F10X_LD: STM32 Low density devices */ + /* #define STM32F10X_LD_VL */ /*!< STM32F10X_LD_VL: STM32 Low density Value Line devices */ + /* #define STM32F10X_MD */ /*!< STM32F10X_MD: STM32 Medium density devices */ + /* #define STM32F10X_MD_VL */ /*!< STM32F10X_MD_VL: STM32 Medium density Value Line devices */ + /* #define STM32F10X_HD */ /*!< STM32F10X_HD: STM32 High density devices */ + /* #define STM32F10X_HD_VL */ /*!< STM32F10X_HD_VL: STM32 High density value line devices */ + /* #define STM32F10X_XL */ /*!< STM32F10X_XL: STM32 XL-density devices */ + /* #define STM32F10X_CL */ /*!< STM32F10X_CL: STM32 Connectivity line devices */ +#endif +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers + where the Flash memory density ranges between 16 and 32 Kbytes. + - Low-density value line devices are STM32F100xx microcontrollers where the Flash + memory density ranges between 16 and 32 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers + where the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 64 and 128 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) + #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)" +#endif + +#if !defined USE_STDPERIPH_DRIVER +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_STDPERIPH_DRIVER*/ +#endif + +/** + * @brief In the following line adjust the value of External High Speed oscillator (HSE) + used in your application + + Tip: To avoid modifying this file each time you need to use different HSE, you + can define the HSE value in your toolchain compiler preprocessor. + */ +#if !defined HSE_VALUE + #ifdef STM32F10X_CL + #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ + #else + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ + #endif /* STM32F10X_CL */ +#endif /* HSE_VALUE */ + + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + Timeout value + */ +#define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */ + +#define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ + +/** + * @brief STM32F10x Standard Peripheral Library version number + */ +#define __STM32F10X_STDPERIPH_VERSION_MAIN (0x03) /*!< [31:24] main version */ +#define __STM32F10X_STDPERIPH_VERSION_SUB1 (0x05) /*!< [23:16] sub1 version */ +#define __STM32F10X_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ +#define __STM32F10X_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F10X_STDPERIPH_VERSION ( (__STM32F10X_STDPERIPH_VERSION_MAIN << 24)\ + |(__STM32F10X_STDPERIPH_VERSION_SUB1 << 16)\ + |(__STM32F10X_STDPERIPH_VERSION_SUB2 << 8)\ + |(__STM32F10X_STDPERIPH_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#ifdef STM32F10X_XL + #define __MPU_PRESENT 1 /*!< STM32 XL-density devices provide an MPU */ +#else + #define __MPU_PRESENT 0 /*!< Other STM32 devices does not provide an MPU */ +#endif /* STM32F10X_XL */ +#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum IRQn +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + +#ifdef STM32F10X_LD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +#endif /* STM32F10X_LD */ + +#ifdef STM32F10X_LD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55 /*!< TIM7 Interrupt */ +#endif /* STM32F10X_LD_VL */ + +#ifdef STM32F10X_MD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +#endif /* STM32F10X_MD */ + +#ifdef STM32F10X_MD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55 /*!< TIM7 Interrupt */ +#endif /* STM32F10X_MD_VL */ + +#ifdef STM32F10X_HD + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ + TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */ + TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +#endif /* STM32F10X_HD */ + +#ifdef STM32F10X_HD_VL + ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */ + TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */ + TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */ + TIM12_IRQn = 43, /*!< TIM12 global Interrupt */ + TIM13_IRQn = 44, /*!< TIM13 global Interrupt */ + TIM14_IRQn = 45, /*!< TIM14 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ + DMA2_Channel5_IRQn = 60 /*!< DMA2 Channel 5 global Interrupt (DMA2 Channel 5 is + mapped at position 60 only if the MISC_REMAP bit in + the AFIO_MAPR2 register is set) */ +#endif /* STM32F10X_HD_VL */ + +#ifdef STM32F10X_XL + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break Interrupt and TIM9 global Interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global Interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global Interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global Interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +#endif /* STM32F10X_XL */ + +#ifdef STM32F10X_CL + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ + DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */ +#endif /* STM32F10X_CL */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +#include "system_stm32f10x.h" +#include + +/** @addtogroup Exported_types + * @{ + */ + +/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */ +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; + +typedef const int32_t sc32; /*!< Read Only */ +typedef const int16_t sc16; /*!< Read Only */ +typedef const int8_t sc8; /*!< Read Only */ + +typedef __IO int32_t vs32; +typedef __IO int16_t vs16; +typedef __IO int8_t vs8; + +typedef __I int32_t vsc32; /*!< Read Only */ +typedef __I int16_t vsc16; /*!< Read Only */ +typedef __I int8_t vsc8; /*!< Read Only */ + +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; + +typedef const uint32_t uc32; /*!< Read Only */ +typedef const uint16_t uc16; /*!< Read Only */ +typedef const uint8_t uc8; /*!< Read Only */ + +typedef __IO uint32_t vu32; +typedef __IO uint16_t vu16; +typedef __IO uint8_t vu8; + +typedef __I uint32_t vuc32; /*!< Read Only */ +typedef __I uint16_t vuc16; /*!< Read Only */ +typedef __I uint8_t vuc8; /*!< Read Only */ + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; + +/*!< STM32F10x Standard Peripheral Library old definitions (maintained for legacy purpose) */ +#define HSEStartUp_TimeOut HSE_STARTUP_TIMEOUT +#define HSE_Value HSE_VALUE +#define HSI_Value HSI_VALUE +/** + * @} + */ + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint16_t DR1; + uint16_t RESERVED1; + __IO uint16_t DR2; + uint16_t RESERVED2; + __IO uint16_t DR3; + uint16_t RESERVED3; + __IO uint16_t DR4; + uint16_t RESERVED4; + __IO uint16_t DR5; + uint16_t RESERVED5; + __IO uint16_t DR6; + uint16_t RESERVED6; + __IO uint16_t DR7; + uint16_t RESERVED7; + __IO uint16_t DR8; + uint16_t RESERVED8; + __IO uint16_t DR9; + uint16_t RESERVED9; + __IO uint16_t DR10; + uint16_t RESERVED10; + __IO uint16_t RTCCR; + uint16_t RESERVED11; + __IO uint16_t CR; + uint16_t RESERVED12; + __IO uint16_t CSR; + uint16_t RESERVED13[5]; + __IO uint16_t DR11; + uint16_t RESERVED14; + __IO uint16_t DR12; + uint16_t RESERVED15; + __IO uint16_t DR13; + uint16_t RESERVED16; + __IO uint16_t DR14; + uint16_t RESERVED17; + __IO uint16_t DR15; + uint16_t RESERVED18; + __IO uint16_t DR16; + uint16_t RESERVED19; + __IO uint16_t DR17; + uint16_t RESERVED20; + __IO uint16_t DR18; + uint16_t RESERVED21; + __IO uint16_t DR19; + uint16_t RESERVED22; + __IO uint16_t DR20; + uint16_t RESERVED23; + __IO uint16_t DR21; + uint16_t RESERVED24; + __IO uint16_t DR22; + uint16_t RESERVED25; + __IO uint16_t DR23; + uint16_t RESERVED26; + __IO uint16_t DR24; + uint16_t RESERVED27; + __IO uint16_t DR25; + uint16_t RESERVED28; + __IO uint16_t DR26; + uint16_t RESERVED29; + __IO uint16_t DR27; + uint16_t RESERVED30; + __IO uint16_t DR28; + uint16_t RESERVED31; + __IO uint16_t DR29; + uint16_t RESERVED32; + __IO uint16_t DR30; + uint16_t RESERVED33; + __IO uint16_t DR31; + uint16_t RESERVED34; + __IO uint16_t DR32; + uint16_t RESERVED35; + __IO uint16_t DR33; + uint16_t RESERVED36; + __IO uint16_t DR34; + uint16_t RESERVED37; + __IO uint16_t DR35; + uint16_t RESERVED38; + __IO uint16_t DR36; + uint16_t RESERVED39; + __IO uint16_t DR37; + uint16_t RESERVED40; + __IO uint16_t DR38; + uint16_t RESERVED41; + __IO uint16_t DR39; + uint16_t RESERVED42; + __IO uint16_t DR40; + uint16_t RESERVED43; + __IO uint16_t DR41; + uint16_t RESERVED44; + __IO uint16_t DR42; + uint16_t RESERVED45; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; +#ifndef STM32F10X_CL + CAN_FilterRegister_TypeDef sFilterRegister[14]; +#else + CAN_FilterRegister_TypeDef sFilterRegister[28]; +#endif /* STM32F10X_CL */ +} CAN_TypeDef; + +/** + * @brief Consumer Electronics Control (CEC) + */ +typedef struct +{ + __IO uint32_t CFGR; + __IO uint32_t OAR; + __IO uint32_t PRES; + __IO uint32_t ESR; + __IO uint32_t CSR; + __IO uint32_t TXD; + __IO uint32_t RXD; +} CEC_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; + __IO uint8_t IDR; + uint8_t RESERVED0; + uint16_t RESERVED1; + __IO uint32_t CR; +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + __IO uint32_t SR; +#endif +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1[2]; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + uint32_t RESERVED8[567]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + uint32_t RESERVED9[9]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +#ifdef STM32F10X_XL + uint32_t RESERVED1[8]; + __IO uint32_t KEYR2; + uint32_t RESERVED2; + __IO uint32_t SR2; + __IO uint32_t CR2; + __IO uint32_t AR2; +#endif /* STM32F10X_XL */ +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; +} FSMC_Bank1E_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; + __IO uint32_t SR2; + __IO uint32_t PMEM2; + __IO uint32_t PATT2; + uint32_t RESERVED0; + __IO uint32_t ECCR2; +} FSMC_Bank2_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR3; + __IO uint32_t SR3; + __IO uint32_t PMEM3; + __IO uint32_t PATT3; + uint32_t RESERVED0; + __IO uint32_t ECCR3; +} FSMC_Bank3_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; + __IO uint32_t SR4; + __IO uint32_t PMEM4; + __IO uint32_t PATT4; + __IO uint32_t PIO4; +} FSMC_Bank4_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; + uint32_t RESERVED0; + __IO uint32_t MAPR2; +} AFIO_TypeDef; +/** + * @brief Inter Integrated Circuit Interface + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t OAR1; + uint16_t RESERVED2; + __IO uint16_t OAR2; + uint16_t RESERVED3; + __IO uint16_t DR; + uint16_t RESERVED4; + __IO uint16_t SR1; + uint16_t RESERVED5; + __IO uint16_t SR2; + uint16_t RESERVED6; + __IO uint16_t CCR; + uint16_t RESERVED7; + __IO uint16_t TRISE; + uint16_t RESERVED8; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; + __IO uint32_t PR; + __IO uint32_t RLR; + __IO uint32_t SR; +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; + +#ifdef STM32F10X_CL + __IO uint32_t AHBRSTR; + __IO uint32_t CFGR2; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + uint32_t RESERVED0; + __IO uint32_t CFGR2; +#endif /* STM32F10X_LD_VL || STM32F10X_MD_VL || STM32F10X_HD_VL */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint16_t CRH; + uint16_t RESERVED0; + __IO uint16_t CRL; + uint16_t RESERVED1; + __IO uint16_t PRLH; + uint16_t RESERVED2; + __IO uint16_t PRLL; + uint16_t RESERVED3; + __IO uint16_t DIVH; + uint16_t RESERVED4; + __IO uint16_t DIVL; + uint16_t RESERVED5; + __IO uint16_t CNTH; + uint16_t RESERVED6; + __IO uint16_t CNTL; + uint16_t RESERVED7; + __IO uint16_t ALRH; + uint16_t RESERVED8; + __IO uint16_t ALRL; + uint16_t RESERVED9; +} RTC_TypeDef; + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; + __IO uint32_t CLKCR; + __IO uint32_t ARG; + __IO uint32_t CMD; + __I uint32_t RESPCMD; + __I uint32_t RESP1; + __I uint32_t RESP2; + __I uint32_t RESP3; + __I uint32_t RESP4; + __IO uint32_t DTIMER; + __IO uint32_t DLEN; + __IO uint32_t DCTRL; + __I uint32_t DCOUNT; + __I uint32_t STA; + __IO uint32_t ICR; + __IO uint32_t MASK; + uint32_t RESERVED0[2]; + __I uint32_t FIFOCNT; + uint32_t RESERVED1[13]; + __IO uint32_t FIFO; +} SDIO_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t SR; + uint16_t RESERVED2; + __IO uint16_t DR; + uint16_t RESERVED3; + __IO uint16_t CRCPR; + uint16_t RESERVED4; + __IO uint16_t RXCRCR; + uint16_t RESERVED5; + __IO uint16_t TXCRCR; + uint16_t RESERVED6; + __IO uint16_t I2SCFGR; + uint16_t RESERVED7; + __IO uint16_t I2SPR; + uint16_t RESERVED8; +} SPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t SMCR; + uint16_t RESERVED2; + __IO uint16_t DIER; + uint16_t RESERVED3; + __IO uint16_t SR; + uint16_t RESERVED4; + __IO uint16_t EGR; + uint16_t RESERVED5; + __IO uint16_t CCMR1; + uint16_t RESERVED6; + __IO uint16_t CCMR2; + uint16_t RESERVED7; + __IO uint16_t CCER; + uint16_t RESERVED8; + __IO uint16_t CNT; + uint16_t RESERVED9; + __IO uint16_t PSC; + uint16_t RESERVED10; + __IO uint16_t ARR; + uint16_t RESERVED11; + __IO uint16_t RCR; + uint16_t RESERVED12; + __IO uint16_t CCR1; + uint16_t RESERVED13; + __IO uint16_t CCR2; + uint16_t RESERVED14; + __IO uint16_t CCR3; + uint16_t RESERVED15; + __IO uint16_t CCR4; + uint16_t RESERVED16; + __IO uint16_t BDTR; + uint16_t RESERVED17; + __IO uint16_t DCR; + uint16_t RESERVED18; + __IO uint16_t DMAR; + uint16_t RESERVED19; +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint16_t SR; + uint16_t RESERVED0; + __IO uint16_t DR; + uint16_t RESERVED1; + __IO uint16_t BRR; + uint16_t RESERVED2; + __IO uint16_t CR1; + uint16_t RESERVED3; + __IO uint16_t CR2; + uint16_t RESERVED4; + __IO uint16_t CR3; + uint16_t RESERVED5; + __IO uint16_t GTPR; + uint16_t RESERVED6; +} USART_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFR; + __IO uint32_t SR; +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + + +#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */ +#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */ +#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ + +#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */ +#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ + +#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) +#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) +#define CEC_BASE (APB1PERIPH_BASE + 0x7800) + +#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) +#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) +#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00) +#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) +#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define TIM8_BASE (APB2PERIPH_BASE + 0x3400) +#define USART1_BASE (APB2PERIPH_BASE + 0x3800) +#define ADC3_BASE (APB2PERIPH_BASE + 0x3C00) +#define TIM15_BASE (APB2PERIPH_BASE + 0x4000) +#define TIM16_BASE (APB2PERIPH_BASE + 0x4400) +#define TIM17_BASE (APB2PERIPH_BASE + 0x4800) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4C00) +#define TIM10_BASE (APB2PERIPH_BASE + 0x5000) +#define TIM11_BASE (APB2PERIPH_BASE + 0x5400) + +#define SDIO_BASE (PERIPH_BASE + 0x18000) + +#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) +#define DMA2_BASE (AHBPERIPH_BASE + 0x0400) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x0408) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x041C) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x0430) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x0444) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x0458) +#define RCC_BASE (AHBPERIPH_BASE + 0x1000) +#define CRC_BASE (AHBPERIPH_BASE + 0x3000) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */ +#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */ + +#define ETH_BASE (AHBPERIPH_BASE + 0x8000) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x0100) +#define ETH_PTP_BASE (ETH_BASE + 0x0700) +#define ETH_DMA_BASE (ETH_BASE + 0x1000) + +#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */ +#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */ +#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) /*!< FSMC Bank2 registers base address */ +#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) /*!< FSMC Bank3 registers base address */ +#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) /*!< FSMC Bank4 registers base address */ + +#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#define BKP ((BKP_TypeDef *) BKP_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define AFIO ((AFIO_TypeDef *) AFIO_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM10 ((TIM_TypeDef *) TIM10_BASE) +#define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define SDIO ((SDIO_TypeDef *) SDIO_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define OB ((OB_TypeDef *) OB_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) +#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) +#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) +#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */ + + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */ + + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET ((uint8_t)0x01) /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS ((uint16_t)0x0001) /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */ +#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */ +#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */ +#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_2V2 ((uint16_t)0x0000) /*!< PVD level 2.2V */ +#define PWR_CR_PLS_2V3 ((uint16_t)0x0020) /*!< PVD level 2.3V */ +#define PWR_CR_PLS_2V4 ((uint16_t)0x0040) /*!< PVD level 2.4V */ +#define PWR_CR_PLS_2V5 ((uint16_t)0x0060) /*!< PVD level 2.5V */ +#define PWR_CR_PLS_2V6 ((uint16_t)0x0080) /*!< PVD level 2.6V */ +#define PWR_CR_PLS_2V7 ((uint16_t)0x00A0) /*!< PVD level 2.7V */ +#define PWR_CR_PLS_2V8 ((uint16_t)0x00C0) /*!< PVD level 2.8V */ +#define PWR_CR_PLS_2V9 ((uint16_t)0x00E0) /*!< PVD level 2.9V */ + +#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */ +#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */ +#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */ +#define PWR_CSR_EWUP ((uint16_t)0x0100) /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL ((uint16_t)0x007F) /*!< Calibration value */ +#define BKP_RTCCR_CCO ((uint16_t)0x0080) /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE ((uint16_t)0x0100) /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS ((uint16_t)0x0200) /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE ((uint8_t)0x01) /*!< TAMPER pin enable */ +#define BKP_CR_TPAL ((uint8_t)0x02) /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE ((uint16_t)0x0001) /*!< Clear Tamper event */ +#define BKP_CSR_CTI ((uint16_t)0x0002) /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE ((uint16_t)0x0004) /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF ((uint16_t)0x0100) /*!< Tamper Event Flag */ +#define BKP_CSR_TIF ((uint16_t)0x0200) /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */ +#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */ +#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */ + +#ifdef STM32F10X_CL + #define RCC_CR_PLL2ON ((uint32_t)0x04000000) /*!< PLL2 enable */ + #define RCC_CR_PLL2RDY ((uint32_t)0x08000000) /*!< PLL2 clock ready flag */ + #define RCC_CR_PLL3ON ((uint32_t)0x10000000) /*!< PLL3 enable */ + #define RCC_CR_PLL3RDY ((uint32_t)0x20000000) /*!< PLL3 clock ready flag */ +#endif /* STM32F10X_CL */ + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */ +#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */ +#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */ + +#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE ((uint32_t)0x0000C000) /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define RCC_CFGR_ADCPRE_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 ((uint32_t)0x00008000) /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 ((uint32_t)0x0000C000) /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define RCC_CFGR_PLLMULL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define RCC_CFGR_PLLMULL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ +#define RCC_CFGR_PLLMULL_3 ((uint32_t)0x00200000) /*!< Bit 3 */ + +#ifdef STM32F10X_CL + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock * 4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock * 5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock * 6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock * 7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock * 8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock * 9 */ + #define RCC_CFGR_PLLMULL6_5 ((uint32_t)0x00340000) /*!< PLL input clock * 6.5 */ + + #define RCC_CFGR_OTGFSPRE ((uint32_t)0x00400000) /*!< USB OTG FS prescaler */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + #define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLLCLK_Div2 ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ + #define RCC_CFGR_MCO_PLL2CLK ((uint32_t)0x08000000) /*!< PLL2 clock selected as MCO source*/ + #define RCC_CFGR_MCO_PLL3CLK_Div2 ((uint32_t)0x09000000) /*!< PLL3 clock divided by 2 selected as MCO source*/ + #define RCC_CFGR_MCO_Ext_HSE ((uint32_t)0x0A000000) /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL3CLK ((uint32_t)0x0B000000) /*!< PLL3 clock selected as MCO source */ +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ + #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ + #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ + #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ + #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ + #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ + #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ + #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ + #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ +#else + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_HSE ((uint32_t)0x00000000) /*!< HSE clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_HSE_Div2 ((uint32_t)0x00020000) /*!< HSE clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ + #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ + #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ + #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ + #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ + #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ + #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ + #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ + #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ + #define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB Device prescaler */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ +#endif /* STM32F10X_CL */ + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */ + +#ifdef STM32F10X_CL + #define RCC_CIR_PLL2RDYF ((uint32_t)0x00000020) /*!< PLL2 Ready Interrupt flag */ + #define RCC_CIR_PLL3RDYF ((uint32_t)0x00000040) /*!< PLL3 Ready Interrupt flag */ + #define RCC_CIR_PLL2RDYIE ((uint32_t)0x00002000) /*!< PLL2 Ready Interrupt Enable */ + #define RCC_CIR_PLL3RDYIE ((uint32_t)0x00004000) /*!< PLL3 Ready Interrupt Enable */ + #define RCC_CIR_PLL2RDYC ((uint32_t)0x00200000) /*!< PLL2 Ready Interrupt Clear */ + #define RCC_CIR_PLL3RDYC ((uint32_t)0x00400000) /*!< PLL3 Ready Interrupt Clear */ +#endif /* STM32F10X_CL */ + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST ((uint32_t)0x00000001) /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST ((uint32_t)0x00000004) /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST ((uint32_t)0x00000008) /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST ((uint32_t)0x00000010) /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST ((uint32_t)0x00000020) /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST ((uint32_t)0x00000200) /*!< ADC 1 interface reset */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB2RSTR_ADC2RST ((uint32_t)0x00000400) /*!< ADC 2 interface reset */ +#endif + +#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 Timer reset */ +#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 Timer reset */ +#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 Timer reset */ +#endif + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB2RSTR_IOPERST ((uint32_t)0x00000040) /*!< I/O port E reset */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */ + #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */ + #define RCC_APB2RSTR_TIM8RST ((uint32_t)0x00002000) /*!< TIM8 Timer reset */ + #define RCC_APB2RSTR_ADC3RST ((uint32_t)0x00008000) /*!< ADC3 interface reset */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */ + #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */ +#endif + +#ifdef STM32F10X_XL + #define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00080000) /*!< TIM9 Timer reset */ + #define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00100000) /*!< TIM10 Timer reset */ + #define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00200000) /*!< TIM11 Timer reset */ +#endif /* STM32F10X_XL */ + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000) /*!< CAN1 reset */ +#endif + +#define RCC_APB1RSTR_BKPRST ((uint32_t)0x08000000) /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */ + #define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */ + #define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */ + #define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) || defined (STM32F10X_XL) + #define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB Device reset */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_XL) + #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ + #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ + #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ + #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ + #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ + #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ + #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ +#endif + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ + #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ + #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ + #define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC interface reset */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ + #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */ + #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */ + #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */ + #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ + #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ + #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ +#endif + +#ifdef STM32F10X_CL + #define RCC_APB1RSTR_CAN2RST ((uint32_t)0x04000000) /*!< CAN2 reset */ +#endif /* STM32F10X_CL */ + +#ifdef STM32F10X_XL + #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */ + #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */ + #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */ +#endif /* STM32F10X_XL */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN ((uint16_t)0x0001) /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN ((uint16_t)0x0004) /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN ((uint16_t)0x0010) /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN ((uint16_t)0x0040) /*!< CRC clock enable */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_HD_VL) + #define RCC_AHBENR_DMA2EN ((uint16_t)0x0002) /*!< DMA2 clock enable */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ + #define RCC_AHBENR_SDIOEN ((uint16_t)0x0400) /*!< SDIO clock enable */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ +#endif + +#ifdef STM32F10X_CL + #define RCC_AHBENR_OTGFSEN ((uint32_t)0x00001000) /*!< USB OTG FS clock enable */ + #define RCC_AHBENR_ETHMACEN ((uint32_t)0x00004000) /*!< ETHERNET MAC clock enable */ + #define RCC_AHBENR_ETHMACTXEN ((uint32_t)0x00008000) /*!< ETHERNET MAC Tx clock enable */ + #define RCC_AHBENR_ETHMACRXEN ((uint32_t)0x00010000) /*!< ETHERNET MAC Rx clock enable */ +#endif /* STM32F10X_CL */ + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN ((uint32_t)0x00000001) /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN ((uint32_t)0x00000004) /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN ((uint32_t)0x00000008) /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN ((uint32_t)0x00000010) /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN ((uint32_t)0x00000020) /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000200) /*!< ADC 1 interface clock enable */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB2ENR_ADC2EN ((uint32_t)0x00000400) /*!< ADC 2 interface clock enable */ +#endif + +#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 Timer clock enable */ +#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 Timer clock enable */ +#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 Timer clock enable */ +#endif + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB2ENR_IOPEEN ((uint32_t)0x00000040) /*!< I/O port E clock enable */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_XL) + #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */ + #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */ + #define RCC_APB2ENR_TIM8EN ((uint32_t)0x00002000) /*!< TIM8 Timer clock enable */ + #define RCC_APB2ENR_ADC3EN ((uint32_t)0x00008000) /*!< DMA1 clock enable */ +#endif + +#if defined (STM32F10X_HD_VL) + #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */ + #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */ +#endif + +#ifdef STM32F10X_XL + #define RCC_APB2ENR_TIM9EN ((uint32_t)0x00080000) /*!< TIM9 Timer clock enable */ + #define RCC_APB2ENR_TIM10EN ((uint32_t)0x00100000) /*!< TIM10 Timer clock enable */ + #define RCC_APB2ENR_TIM11EN ((uint32_t)0x00200000) /*!< TIM11 Timer clock enable */ +#endif + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */ + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) +#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000) /*!< CAN1 clock enable */ +#endif + +#define RCC_APB1ENR_BKPEN ((uint32_t)0x08000000) /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) + #define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */ + #define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */ + #define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */ + #define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */ +#endif /* STM32F10X_LD && STM32F10X_LD_VL */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) + #define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB Device clock enable */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) + #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ + #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ + #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ + #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ + #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ + #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ + #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ +#endif + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ + #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ + #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ + #define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC interface clock enable */ +#endif + +#ifdef STM32F10X_HD_VL + #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ + #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */ + #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */ + #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */ + #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ + #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ + #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ +#endif /* STM32F10X_HD_VL */ + +#ifdef STM32F10X_CL + #define RCC_APB1ENR_CAN2EN ((uint32_t)0x04000000) /*!< CAN2 clock enable */ +#endif /* STM32F10X_CL */ + +#ifdef STM32F10X_XL + #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */ + #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */ + #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */ +#endif /* STM32F10X_XL */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */ +#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */ + +#ifdef STM32F10X_CL +/******************* Bit definition for RCC_AHBRSTR register ****************/ + #define RCC_AHBRSTR_OTGFSRST ((uint32_t)0x00001000) /*!< USB OTG FS reset */ + #define RCC_AHBRSTR_ETHMACRST ((uint32_t)0x00004000) /*!< ETHERNET MAC reset */ + +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ + #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ + #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ + #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ + +/*!< PREDIV2 configuration */ + #define RCC_CFGR2_PREDIV2 ((uint32_t)0x000000F0) /*!< PREDIV2[3:0] bits */ + #define RCC_CFGR2_PREDIV2_0 ((uint32_t)0x00000010) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV2_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV2_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV2_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV2_DIV1 ((uint32_t)0x00000000) /*!< PREDIV2 input clock not divided */ + #define RCC_CFGR2_PREDIV2_DIV2 ((uint32_t)0x00000010) /*!< PREDIV2 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV2_DIV3 ((uint32_t)0x00000020) /*!< PREDIV2 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV2_DIV4 ((uint32_t)0x00000030) /*!< PREDIV2 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV2_DIV5 ((uint32_t)0x00000040) /*!< PREDIV2 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV2_DIV6 ((uint32_t)0x00000050) /*!< PREDIV2 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV2_DIV7 ((uint32_t)0x00000060) /*!< PREDIV2 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV2_DIV8 ((uint32_t)0x00000070) /*!< PREDIV2 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV2_DIV9 ((uint32_t)0x00000080) /*!< PREDIV2 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV2_DIV10 ((uint32_t)0x00000090) /*!< PREDIV2 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV2_DIV11 ((uint32_t)0x000000A0) /*!< PREDIV2 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV2_DIV12 ((uint32_t)0x000000B0) /*!< PREDIV2 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV2_DIV13 ((uint32_t)0x000000C0) /*!< PREDIV2 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV2_DIV14 ((uint32_t)0x000000D0) /*!< PREDIV2 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV2_DIV15 ((uint32_t)0x000000E0) /*!< PREDIV2 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV2_DIV16 ((uint32_t)0x000000F0) /*!< PREDIV2 input clock divided by 16 */ + +/*!< PLL2MUL configuration */ + #define RCC_CFGR2_PLL2MUL ((uint32_t)0x00000F00) /*!< PLL2MUL[3:0] bits */ + #define RCC_CFGR2_PLL2MUL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ + #define RCC_CFGR2_PLL2MUL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + #define RCC_CFGR2_PLL2MUL_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + #define RCC_CFGR2_PLL2MUL_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + + #define RCC_CFGR2_PLL2MUL8 ((uint32_t)0x00000600) /*!< PLL2 input clock * 8 */ + #define RCC_CFGR2_PLL2MUL9 ((uint32_t)0x00000700) /*!< PLL2 input clock * 9 */ + #define RCC_CFGR2_PLL2MUL10 ((uint32_t)0x00000800) /*!< PLL2 input clock * 10 */ + #define RCC_CFGR2_PLL2MUL11 ((uint32_t)0x00000900) /*!< PLL2 input clock * 11 */ + #define RCC_CFGR2_PLL2MUL12 ((uint32_t)0x00000A00) /*!< PLL2 input clock * 12 */ + #define RCC_CFGR2_PLL2MUL13 ((uint32_t)0x00000B00) /*!< PLL2 input clock * 13 */ + #define RCC_CFGR2_PLL2MUL14 ((uint32_t)0x00000C00) /*!< PLL2 input clock * 14 */ + #define RCC_CFGR2_PLL2MUL16 ((uint32_t)0x00000E00) /*!< PLL2 input clock * 16 */ + #define RCC_CFGR2_PLL2MUL20 ((uint32_t)0x00000F00) /*!< PLL2 input clock * 20 */ + +/*!< PLL3MUL configuration */ + #define RCC_CFGR2_PLL3MUL ((uint32_t)0x0000F000) /*!< PLL3MUL[3:0] bits */ + #define RCC_CFGR2_PLL3MUL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ + #define RCC_CFGR2_PLL3MUL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + #define RCC_CFGR2_PLL3MUL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + #define RCC_CFGR2_PLL3MUL_3 ((uint32_t)0x00008000) /*!< Bit 3 */ + + #define RCC_CFGR2_PLL3MUL8 ((uint32_t)0x00006000) /*!< PLL3 input clock * 8 */ + #define RCC_CFGR2_PLL3MUL9 ((uint32_t)0x00007000) /*!< PLL3 input clock * 9 */ + #define RCC_CFGR2_PLL3MUL10 ((uint32_t)0x00008000) /*!< PLL3 input clock * 10 */ + #define RCC_CFGR2_PLL3MUL11 ((uint32_t)0x00009000) /*!< PLL3 input clock * 11 */ + #define RCC_CFGR2_PLL3MUL12 ((uint32_t)0x0000A000) /*!< PLL3 input clock * 12 */ + #define RCC_CFGR2_PLL3MUL13 ((uint32_t)0x0000B000) /*!< PLL3 input clock * 13 */ + #define RCC_CFGR2_PLL3MUL14 ((uint32_t)0x0000C000) /*!< PLL3 input clock * 14 */ + #define RCC_CFGR2_PLL3MUL16 ((uint32_t)0x0000E000) /*!< PLL3 input clock * 16 */ + #define RCC_CFGR2_PLL3MUL20 ((uint32_t)0x0000F000) /*!< PLL3 input clock * 20 */ + + #define RCC_CFGR2_PREDIV1SRC ((uint32_t)0x00010000) /*!< PREDIV1 entry clock source */ + #define RCC_CFGR2_PREDIV1SRC_PLL2 ((uint32_t)0x00010000) /*!< PLL2 selected as PREDIV1 entry clock source */ + #define RCC_CFGR2_PREDIV1SRC_HSE ((uint32_t)0x00000000) /*!< HSE selected as PREDIV1 entry clock source */ + #define RCC_CFGR2_I2S2SRC ((uint32_t)0x00020000) /*!< I2S2 entry clock source */ + #define RCC_CFGR2_I2S3SRC ((uint32_t)0x00040000) /*!< I2S3 clock source */ +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ + #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ + #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ + #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ +#endif + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0 ((uint32_t)0x00000003) /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define GPIO_CRL_MODE0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define GPIO_CRL_MODE1 ((uint32_t)0x00000030) /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define GPIO_CRL_MODE1_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define GPIO_CRL_MODE2 ((uint32_t)0x00000300) /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define GPIO_CRL_MODE2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define GPIO_CRL_MODE3 ((uint32_t)0x00003000) /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define GPIO_CRL_MODE3_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE4 ((uint32_t)0x00030000) /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define GPIO_CRL_MODE4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE5 ((uint32_t)0x00300000) /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define GPIO_CRL_MODE5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE6 ((uint32_t)0x03000000) /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define GPIO_CRL_MODE6_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE7 ((uint32_t)0x30000000) /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define GPIO_CRL_MODE7_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0 ((uint32_t)0x0000000C) /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define GPIO_CRL_CNF0_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define GPIO_CRL_CNF1 ((uint32_t)0x000000C0) /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define GPIO_CRL_CNF1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define GPIO_CRL_CNF2 ((uint32_t)0x00000C00) /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define GPIO_CRL_CNF2_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define GPIO_CRL_CNF3 ((uint32_t)0x0000C000) /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define GPIO_CRL_CNF3_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF4 ((uint32_t)0x000C0000) /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define GPIO_CRL_CNF4_1 ((uint32_t)0x00080000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF5 ((uint32_t)0x00C00000) /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define GPIO_CRL_CNF5_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF6 ((uint32_t)0x0C000000) /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define GPIO_CRL_CNF6_1 ((uint32_t)0x08000000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF7 ((uint32_t)0xC0000000) /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 ((uint32_t)0x40000000) /*!< Bit 0 */ +#define GPIO_CRL_CNF7_1 ((uint32_t)0x80000000) /*!< Bit 1 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8 ((uint32_t)0x00000003) /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define GPIO_CRH_MODE8_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define GPIO_CRH_MODE9 ((uint32_t)0x00000030) /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define GPIO_CRH_MODE9_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define GPIO_CRH_MODE10 ((uint32_t)0x00000300) /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define GPIO_CRH_MODE10_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define GPIO_CRH_MODE11 ((uint32_t)0x00003000) /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define GPIO_CRH_MODE11_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE12 ((uint32_t)0x00030000) /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define GPIO_CRH_MODE12_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE13 ((uint32_t)0x00300000) /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define GPIO_CRH_MODE13_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE14 ((uint32_t)0x03000000) /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define GPIO_CRH_MODE14_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE15 ((uint32_t)0x30000000) /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define GPIO_CRH_MODE15_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8 ((uint32_t)0x0000000C) /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define GPIO_CRH_CNF8_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define GPIO_CRH_CNF9 ((uint32_t)0x000000C0) /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define GPIO_CRH_CNF9_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define GPIO_CRH_CNF10 ((uint32_t)0x00000C00) /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define GPIO_CRH_CNF10_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define GPIO_CRH_CNF11 ((uint32_t)0x0000C000) /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define GPIO_CRH_CNF11_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF12 ((uint32_t)0x000C0000) /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define GPIO_CRH_CNF12_1 ((uint32_t)0x00080000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF13 ((uint32_t)0x00C00000) /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define GPIO_CRH_CNF13_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF14 ((uint32_t)0x0C000000) /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define GPIO_CRH_CNF14_1 ((uint32_t)0x08000000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF15 ((uint32_t)0xC0000000) /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 ((uint32_t)0x40000000) /*!< Bit 0 */ +#define GPIO_CRH_CNF15_1 ((uint32_t)0x80000000) /*!< Bit 1 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0 ((uint16_t)0x0001) /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1 ((uint16_t)0x0002) /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2 ((uint16_t)0x0004) /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3 ((uint16_t)0x0008) /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4 ((uint16_t)0x0010) /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5 ((uint16_t)0x0020) /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6 ((uint16_t)0x0040) /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7 ((uint16_t)0x0080) /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8 ((uint16_t)0x0100) /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9 ((uint16_t)0x0200) /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10 ((uint16_t)0x0400) /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11 ((uint16_t)0x0800) /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12 ((uint16_t)0x1000) /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13 ((uint16_t)0x2000) /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14 ((uint16_t)0x4000) /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15 ((uint16_t)0x8000) /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0 ((uint16_t)0x0001) /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1 ((uint16_t)0x0002) /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2 ((uint16_t)0x0004) /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3 ((uint16_t)0x0008) /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4 ((uint16_t)0x0010) /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5 ((uint16_t)0x0020) /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6 ((uint16_t)0x0040) /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7 ((uint16_t)0x0080) /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8 ((uint16_t)0x0100) /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9 ((uint16_t)0x0200) /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10 ((uint16_t)0x0400) /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11 ((uint16_t)0x0800) /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12 ((uint16_t)0x1000) /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13 ((uint16_t)0x2000) /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14 ((uint16_t)0x4000) /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15 ((uint16_t)0x8000) /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0 ((uint32_t)0x00000001) /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1 ((uint32_t)0x00000002) /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2 ((uint32_t)0x00000004) /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3 ((uint32_t)0x00000008) /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4 ((uint32_t)0x00000010) /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5 ((uint32_t)0x00000020) /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6 ((uint32_t)0x00000040) /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7 ((uint32_t)0x00000080) /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8 ((uint32_t)0x00000100) /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9 ((uint32_t)0x00000200) /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10 ((uint32_t)0x00000400) /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11 ((uint32_t)0x00000800) /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12 ((uint32_t)0x00001000) /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13 ((uint32_t)0x00002000) /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14 ((uint32_t)0x00004000) /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15 ((uint32_t)0x00008000) /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0 ((uint32_t)0x00010000) /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1 ((uint32_t)0x00020000) /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2 ((uint32_t)0x00040000) /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3 ((uint32_t)0x00080000) /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4 ((uint32_t)0x00100000) /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5 ((uint32_t)0x00200000) /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6 ((uint32_t)0x00400000) /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7 ((uint32_t)0x00800000) /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8 ((uint32_t)0x01000000) /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9 ((uint32_t)0x02000000) /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10 ((uint32_t)0x04000000) /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11 ((uint32_t)0x08000000) /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12 ((uint32_t)0x10000000) /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13 ((uint32_t)0x20000000) /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14 ((uint32_t)0x40000000) /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15 ((uint32_t)0x80000000) /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0 ((uint16_t)0x0001) /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1 ((uint16_t)0x0002) /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2 ((uint16_t)0x0004) /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3 ((uint16_t)0x0008) /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4 ((uint16_t)0x0010) /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5 ((uint16_t)0x0020) /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6 ((uint16_t)0x0040) /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7 ((uint16_t)0x0080) /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8 ((uint16_t)0x0100) /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9 ((uint16_t)0x0200) /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10 ((uint16_t)0x0400) /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11 ((uint16_t)0x0800) /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12 ((uint16_t)0x1000) /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13 ((uint16_t)0x2000) /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14 ((uint16_t)0x4000) /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15 ((uint16_t)0x8000) /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001) /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002) /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004) /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008) /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010) /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020) /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040) /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080) /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100) /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200) /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400) /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800) /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000) /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000) /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000) /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000) /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK ((uint32_t)0x00010000) /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN ((uint8_t)0x0F) /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define AFIO_EVCR_PIN_1 ((uint8_t)0x02) /*!< Bit 1 */ +#define AFIO_EVCR_PIN_2 ((uint8_t)0x04) /*!< Bit 2 */ +#define AFIO_EVCR_PIN_3 ((uint8_t)0x08) /*!< Bit 3 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 ((uint8_t)0x00) /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1 ((uint8_t)0x01) /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2 ((uint8_t)0x02) /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3 ((uint8_t)0x03) /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4 ((uint8_t)0x04) /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5 ((uint8_t)0x05) /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6 ((uint8_t)0x06) /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7 ((uint8_t)0x07) /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8 ((uint8_t)0x08) /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9 ((uint8_t)0x09) /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10 ((uint8_t)0x0A) /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11 ((uint8_t)0x0B) /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12 ((uint8_t)0x0C) /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13 ((uint8_t)0x0D) /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14 ((uint8_t)0x0E) /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15 ((uint8_t)0x0F) /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT ((uint8_t)0x70) /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 ((uint8_t)0x10) /*!< Bit 0 */ +#define AFIO_EVCR_PORT_1 ((uint8_t)0x20) /*!< Bit 1 */ +#define AFIO_EVCR_PORT_2 ((uint8_t)0x40) /*!< Bit 2 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA ((uint8_t)0x00) /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB ((uint8_t)0x10) /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC ((uint8_t)0x20) /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD ((uint8_t)0x30) /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE ((uint8_t)0x40) /*!< Port E selected */ + +#define AFIO_EVCR_EVOE ((uint8_t)0x80) /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP ((uint32_t)0x00000001) /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP ((uint32_t)0x00000002) /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP ((uint32_t)0x00000004) /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP ((uint32_t)0x00000008) /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP ((uint32_t)0x00000030) /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define AFIO_MAPR_USART3_REMAP_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP ((uint32_t)0x00000010) /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP ((uint32_t)0x00000030) /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP ((uint32_t)0x000000C0) /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define AFIO_MAPR_TIM1_REMAP_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP ((uint32_t)0x00000040) /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP ((uint32_t)0x000000C0) /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP ((uint32_t)0x00000300) /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define AFIO_MAPR_TIM2_REMAP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 ((uint32_t)0x00000100) /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 ((uint32_t)0x00000200) /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP ((uint32_t)0x00000300) /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP ((uint32_t)0x00000C00) /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define AFIO_MAPR_TIM3_REMAP_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP ((uint32_t)0x00000800) /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP ((uint32_t)0x00000C00) /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP ((uint32_t)0x00001000) /*!< TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_MAPR_CAN_REMAP ((uint32_t)0x00006000) /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define AFIO_MAPR_CAN_REMAP_1 ((uint32_t)0x00004000) /*!< Bit 1 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 ((uint32_t)0x00004000) /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 ((uint32_t)0x00006000) /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP ((uint32_t)0x00008000) /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP ((uint32_t)0x00010000) /*!< TIM5 Channel4 Internal Remap */ +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP ((uint32_t)0x00020000) /*!< ADC 1 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC1_ETRGREG_REMAP ((uint32_t)0x00040000) /*!< ADC 1 External Trigger Regular Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP ((uint32_t)0x00080000) /*!< ADC 2 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGREG_REMAP ((uint32_t)0x00100000) /*!< ADC 2 External Trigger Regular Conversion remapping */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG ((uint32_t)0x07000000) /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define AFIO_MAPR_SWJ_CFG_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define AFIO_MAPR_SWJ_CFG_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define AFIO_MAPR_SWJ_CFG_RESET ((uint32_t)0x00000000) /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST ((uint32_t)0x01000000) /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE ((uint32_t)0x04000000) /*!< JTAG-DP Disabled and SW-DP Disabled */ + +#ifdef STM32F10X_CL +/*!< ETH_REMAP configuration */ + #define AFIO_MAPR_ETH_REMAP ((uint32_t)0x00200000) /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */ + +/*!< CAN2_REMAP configuration */ + #define AFIO_MAPR_CAN2_REMAP ((uint32_t)0x00400000) /*!< CAN2_REMAP bit (CAN2 I/O remapping) */ + +/*!< MII_RMII_SEL configuration */ + #define AFIO_MAPR_MII_RMII_SEL ((uint32_t)0x00800000) /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */ + +/*!< SPI3_REMAP configuration */ + #define AFIO_MAPR_SPI3_REMAP ((uint32_t)0x10000000) /*!< SPI3_REMAP bit (SPI3 remapping) */ + +/*!< TIM2ITR1_IREMAP configuration */ + #define AFIO_MAPR_TIM2ITR1_IREMAP ((uint32_t)0x20000000) /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */ + +/*!< PTP_PPS_REMAP configuration */ + #define AFIO_MAPR_PTP_PPS_REMAP ((uint32_t)0x40000000) /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */ +#endif + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /*!< PG[15] pin */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/****************** Bit definition for AFIO_MAPR2 register ******************/ +#define AFIO_MAPR2_TIM15_REMAP ((uint32_t)0x00000001) /*!< TIM15 remapping */ +#define AFIO_MAPR2_TIM16_REMAP ((uint32_t)0x00000002) /*!< TIM16 remapping */ +#define AFIO_MAPR2_TIM17_REMAP ((uint32_t)0x00000004) /*!< TIM17 remapping */ +#define AFIO_MAPR2_CEC_REMAP ((uint32_t)0x00000008) /*!< CEC remapping */ +#define AFIO_MAPR2_TIM1_DMA_REMAP ((uint32_t)0x00000010) /*!< TIM1_DMA remapping */ +#endif + +#ifdef STM32F10X_HD_VL +#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */ +#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */ +#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP ((uint32_t)0x00000800) /*!< TIM6/TIM7 and DAC DMA remapping */ +#define AFIO_MAPR2_TIM12_REMAP ((uint32_t)0x00001000) /*!< TIM12 remapping */ +#define AFIO_MAPR2_MISC_REMAP ((uint32_t)0x00002000) /*!< Miscellaneous remapping */ +#endif + +#ifdef STM32F10X_XL +/****************** Bit definition for AFIO_MAPR2 register ******************/ +#define AFIO_MAPR2_TIM9_REMAP ((uint32_t)0x00000020) /*!< TIM9 remapping */ +#define AFIO_MAPR2_TIM10_REMAP ((uint32_t)0x00000040) /*!< TIM10 remapping */ +#define AFIO_MAPR2_TIM11_REMAP ((uint32_t)0x00000080) /*!< TIM11 remapping */ +#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */ +#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */ +#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */ +#endif + +/******************************************************************************/ +/* */ +/* SystemTick */ +/* */ +/******************************************************************************/ + +/***************** Bit definition for SysTick_CTRL register *****************/ +#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */ +#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */ +#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */ +#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */ + +/***************** Bit definition for SysTick_LOAD register *****************/ +#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */ + +/***************** Bit definition for SysTick_VAL register ******************/ +#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */ + +/***************** Bit definition for SysTick_CALIB register ****************/ +#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */ +#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */ +#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */ + +/******************************************************************************/ +/* */ +/* Nested Vectored Interrupt Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for NVIC_ISER register *******************/ +#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */ +#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICER register *******************/ +#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */ +#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ISPR register *******************/ +#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */ +#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICPR register *******************/ +#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */ +#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_IABR register *******************/ +#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */ +#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_PRI0 register *******************/ +#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */ +#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */ +#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */ +#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */ + +/****************** Bit definition for NVIC_PRI1 register *******************/ +#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */ +#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */ +#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */ +#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */ + +/****************** Bit definition for NVIC_PRI2 register *******************/ +#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */ +#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */ +#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */ +#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */ + +/****************** Bit definition for NVIC_PRI3 register *******************/ +#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */ +#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */ +#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */ +#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */ + +/****************** Bit definition for NVIC_PRI4 register *******************/ +#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */ +#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */ +#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */ +#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */ + +/****************** Bit definition for NVIC_PRI5 register *******************/ +#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */ +#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */ +#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */ +#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */ + +/****************** Bit definition for NVIC_PRI6 register *******************/ +#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */ +#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */ +#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */ +#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */ + +/****************** Bit definition for NVIC_PRI7 register *******************/ +#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */ +#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */ +#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */ +#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */ + +/****************** Bit definition for SCB_CPUID register *******************/ +#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */ +#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */ +#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */ +#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */ +#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */ + +/******************* Bit definition for SCB_ICSR register *******************/ +#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */ +#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */ +#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */ +#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */ +#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */ +#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */ +#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */ +#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */ +#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */ +#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */ + +/******************* Bit definition for SCB_VTOR register *******************/ +#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */ +#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */ + +/*!<***************** Bit definition for SCB_AIRCR register *******************/ +#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */ +#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */ +#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */ + +#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */ +#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +/* prority group configuration */ +#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */ +#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */ + +#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */ +#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */ + +/******************* Bit definition for SCB_SCR register ********************/ +#define SCB_SCR_SLEEPONEXIT ((uint8_t)0x02) /*!< Sleep on exit bit */ +#define SCB_SCR_SLEEPDEEP ((uint8_t)0x04) /*!< Sleep deep bit */ +#define SCB_SCR_SEVONPEND ((uint8_t)0x10) /*!< Wake up from WFE */ + +/******************** Bit definition for SCB_CCR register *******************/ +#define SCB_CCR_NONBASETHRDENA ((uint16_t)0x0001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */ +#define SCB_CCR_USERSETMPEND ((uint16_t)0x0002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */ +#define SCB_CCR_UNALIGN_TRP ((uint16_t)0x0008) /*!< Trap for unaligned access */ +#define SCB_CCR_DIV_0_TRP ((uint16_t)0x0010) /*!< Trap on Divide by 0 */ +#define SCB_CCR_BFHFNMIGN ((uint16_t)0x0100) /*!< Handlers running at priority -1 and -2 */ +#define SCB_CCR_STKALIGN ((uint16_t)0x0200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */ + +/******************* Bit definition for SCB_SHPR register ********************/ +#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */ +#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */ +#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */ +#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */ + +/****************** Bit definition for SCB_SHCSR register *******************/ +#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */ +#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */ +#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */ +#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */ +#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */ +#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */ +#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */ +#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */ +#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */ +#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */ +#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */ +#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */ +#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */ +#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */ + +/******************* Bit definition for SCB_CFSR register *******************/ +/*!< MFSR */ +#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */ +#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */ +#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */ +#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */ +#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */ +/*!< BFSR */ +#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */ +#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */ +#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */ +#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */ +#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */ +#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */ +/*!< UFSR */ +#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to execute an undefined instruction */ +#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */ +#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */ +#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */ +#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */ +#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */ + +/******************* Bit definition for SCB_HFSR register *******************/ +#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occurs because of vector table read on exception processing */ +#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */ +#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */ + +/******************* Bit definition for SCB_DFSR register *******************/ +#define SCB_DFSR_HALTED ((uint8_t)0x01) /*!< Halt request flag */ +#define SCB_DFSR_BKPT ((uint8_t)0x02) /*!< BKPT flag */ +#define SCB_DFSR_DWTTRAP ((uint8_t)0x04) /*!< Data Watchpoint and Trace (DWT) flag */ +#define SCB_DFSR_VCATCH ((uint8_t)0x08) /*!< Vector catch flag */ +#define SCB_DFSR_EXTERNAL ((uint8_t)0x10) /*!< External debug request flag */ + +/******************* Bit definition for SCB_MMFAR register ******************/ +#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */ + +/******************* Bit definition for SCB_BFAR register *******************/ +#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */ + +/******************* Bit definition for SCB_afsr register *******************/ +#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */ +#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */ +#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */ + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */ + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */ +#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */ + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */ +#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR1 register *******************/ +#define DMA_CCR1_EN ((uint16_t)0x0001) /*!< Channel enable*/ +#define DMA_CCR1_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR1_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR1_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR1_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR1_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR1_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR1_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR1_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR1_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR1_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR1_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR1_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR1_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR1_PL ((uint16_t)0x3000) /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR1_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR1_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR1_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR2 register *******************/ +#define DMA_CCR2_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR2_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR2_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR2_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR2_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR2_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR2_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR2_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR2_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR2_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR2_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR2_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR2_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR2_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR2_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR2_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR2_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR2_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR3 register *******************/ +#define DMA_CCR3_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR3_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR3_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR3_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR3_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR3_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR3_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR3_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR3_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR3_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR3_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR3_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR3_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR3_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR3_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR3_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR3_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR3_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/*!<****************** Bit definition for DMA_CCR4 register *******************/ +#define DMA_CCR4_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR4_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR4_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR4_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR4_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR4_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR4_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR4_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR4_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR4_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR4_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR4_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR4_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR4_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR4_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR4_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR4_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR4_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/****************** Bit definition for DMA_CCR5 register *******************/ +#define DMA_CCR5_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR5_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR5_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR5_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR5_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR5_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR5_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR5_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR5_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR5_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR5_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR5_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR5_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR5_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR5_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR5_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR5_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR5_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */ + +/******************* Bit definition for DMA_CCR6 register *******************/ +#define DMA_CCR6_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR6_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR6_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR6_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR6_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR6_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR6_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR6_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR6_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR6_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR6_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR6_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR6_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR6_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR6_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR6_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR6_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR6_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR7 register *******************/ +#define DMA_CCR7_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR7_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR7_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR7_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR7_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR7_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR7_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR7_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR7_PSIZE , ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR7_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR7_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR7_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR7_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR7_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR7_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR7_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR7_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR7_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */ + +/****************** Bit definition for DMA_CNDTR1 register ******************/ +#define DMA_CNDTR1_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR2 register ******************/ +#define DMA_CNDTR2_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR3 register ******************/ +#define DMA_CNDTR3_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR4 register ******************/ +#define DMA_CNDTR4_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR5 register ******************/ +#define DMA_CNDTR5_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR6 register ******************/ +#define DMA_CNDTR6_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CNDTR7 register ******************/ +#define DMA_CNDTR7_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */ + +/****************** Bit definition for DMA_CPAR1 register *******************/ +#define DMA_CPAR1_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR2 register *******************/ +#define DMA_CPAR2_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR3 register *******************/ +#define DMA_CPAR3_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + + +/****************** Bit definition for DMA_CPAR4 register *******************/ +#define DMA_CPAR4_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR5 register *******************/ +#define DMA_CPAR5_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CPAR6 register *******************/ +#define DMA_CPAR6_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + + +/****************** Bit definition for DMA_CPAR7 register *******************/ +#define DMA_CPAR7_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */ + +/****************** Bit definition for DMA_CMAR1 register *******************/ +#define DMA_CMAR1_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR2 register *******************/ +#define DMA_CMAR2_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR3 register *******************/ +#define DMA_CMAR3_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + + +/****************** Bit definition for DMA_CMAR4 register *******************/ +#define DMA_CMAR4_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR5 register *******************/ +#define DMA_CMAR5_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR6 register *******************/ +#define DMA_CMAR6_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/****************** Bit definition for DMA_CMAR7 register *******************/ +#define DMA_CMAR7_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD ((uint8_t)0x01) /*!< Analog watchdog flag */ +#define ADC_SR_EOC ((uint8_t)0x02) /*!< End of conversion */ +#define ADC_SR_JEOC ((uint8_t)0x04) /*!< Injected channel end of conversion */ +#define ADC_SR_JSTRT ((uint8_t)0x08) /*!< Injected channel Start flag */ +#define ADC_SR_STRT ((uint8_t)0x10) /*!< Regular channel Start flag */ + +/******************* Bit definition for ADC_CR1 register ********************/ +#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */ +#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!< Interrupt enable for EOC */ +#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!< Analog Watchdog interrupt enable */ +#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!< Interrupt enable for injected channels */ +#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!< Scan mode */ +#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!< Enable the watchdog on a single channel in scan mode */ +#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!< Automatic injected group conversion */ +#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!< Discontinuous mode on regular channels */ +#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!< Discontinuous mode on injected channels */ + +#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */ +#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!< Bit 2 */ + +#define ADC_CR1_DUALMOD ((uint32_t)0x000F0000) /*!< DUALMOD[3:0] bits (Dual mode selection) */ +#define ADC_CR1_DUALMOD_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define ADC_CR1_DUALMOD_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define ADC_CR1_DUALMOD_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define ADC_CR1_DUALMOD_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!< Analog watchdog enable on injected channels */ +#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */ + + +/******************* Bit definition for ADC_CR2 register ********************/ +#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */ +#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */ +#define ADC_CR2_CAL ((uint32_t)0x00000004) /*!< A/D Calibration */ +#define ADC_CR2_RSTCAL ((uint32_t)0x00000008) /*!< Reset Calibration */ +#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!< Direct Memory access mode */ +#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!< Data Alignment */ + +#define ADC_CR2_JEXTSEL ((uint32_t)0x00007000) /*!< JEXTSEL[2:0] bits (External event select for injected group) */ +#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_CR2_JEXTTRIG ((uint32_t)0x00008000) /*!< External Trigger Conversion mode for injected channels */ + +#define ADC_CR2_EXTSEL ((uint32_t)0x000E0000) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */ +#define ADC_CR2_EXTSEL_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define ADC_CR2_EXTSEL_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define ADC_CR2_EXTSEL_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +#define ADC_CR2_EXTTRIG ((uint32_t)0x00100000) /*!< External Trigger Conversion mode for regular channels */ +#define ADC_CR2_JSWSTART ((uint32_t)0x00200000) /*!< Start Conversion of injected channels */ +#define ADC_CR2_SWSTART ((uint32_t)0x00400000) /*!< Start Conversion of regular channels */ +#define ADC_CR2_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */ + +/****************** Bit definition for ADC_SMPR1 register *******************/ +#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */ +#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */ +#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */ +#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */ +#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */ +#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!< SMP15[2:0] bits (Channel 15 Sample time selection) */ +#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */ +#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */ +#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_SMPR2 register *******************/ +#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */ +#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */ +#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */ +#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!< Bit 1 */ +#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */ +#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */ +#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */ +#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */ +#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */ +#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */ +#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */ +#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!< Bit 0 */ +#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */ +#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */ + +/****************** Bit definition for ADC_JOFR1 register *******************/ +#define ADC_JOFR1_JOFFSET1 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 1 */ + +/****************** Bit definition for ADC_JOFR2 register *******************/ +#define ADC_JOFR2_JOFFSET2 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 2 */ + +/****************** Bit definition for ADC_JOFR3 register *******************/ +#define ADC_JOFR3_JOFFSET3 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 3 */ + +/****************** Bit definition for ADC_JOFR4 register *******************/ +#define ADC_JOFR4_JOFFSET4 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 4 */ + +/******************* Bit definition for ADC_HTR register ********************/ +#define ADC_HTR_HT ((uint16_t)0x0FFF) /*!< Analog watchdog high threshold */ + +/******************* Bit definition for ADC_LTR register ********************/ +#define ADC_LTR_LT ((uint16_t)0x0FFF) /*!< Analog watchdog low threshold */ + +/******************* Bit definition for ADC_SQR1 register *******************/ +#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!< SQ13[4:0] bits (13th conversion in regular sequence) */ +#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!< SQ14[4:0] bits (14th conversion in regular sequence) */ +#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!< SQ15[4:0] bits (15th conversion in regular sequence) */ +#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!< SQ16[4:0] bits (16th conversion in regular sequence) */ +#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!< L[3:0] bits (Regular channel sequence length) */ +#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +/******************* Bit definition for ADC_SQR2 register *******************/ +#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!< SQ7[4:0] bits (7th conversion in regular sequence) */ +#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!< SQ8[4:0] bits (8th conversion in regular sequence) */ +#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!< SQ9[4:0] bits (9th conversion in regular sequence) */ +#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!< SQ10[4:0] bits (10th conversion in regular sequence) */ +#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!< SQ11[4:0] bits (11th conversion in regular sequence) */ +#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!< SQ12[4:0] bits (12th conversion in regular sequence) */ +#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_SQR3 register *******************/ +#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!< SQ1[4:0] bits (1st conversion in regular sequence) */ +#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */ +#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */ +#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!< SQ4[4:0] bits (4th conversion in regular sequence) */ +#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!< SQ5[4:0] bits (5th conversion in regular sequence) */ +#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!< Bit 3 */ +#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!< Bit 4 */ + +#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!< SQ6[4:0] bits (6th conversion in regular sequence) */ +#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!< Bit 0 */ +#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!< Bit 2 */ +#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!< Bit 3 */ +#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!< Bit 4 */ + +/******************* Bit definition for ADC_JSQR register *******************/ +#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */ +#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */ +#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ +#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ +#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ +#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ +#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */ +#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */ +#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ +#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ +#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ +#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ +#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ + +#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!< JL[1:0] bits (Injected Sequence length) */ +#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +/******************* Bit definition for ADC_JDR1 register *******************/ +#define ADC_JDR1_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR2 register *******************/ +#define ADC_JDR2_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR3 register *******************/ +#define ADC_JDR3_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************* Bit definition for ADC_JDR4 register *******************/ +#define ADC_JDR4_JDATA ((uint16_t)0xFFFF) /*!< Injected data */ + +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */ +#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!< ADC2 data */ + +/******************************************************************************/ +/* */ +/* Digital to Analog Converter */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for DAC_CR register ********************/ +#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */ +#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */ +#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */ + +#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */ +#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ +#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ +#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ + +#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ +#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */ +#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */ +#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */ +#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */ + +#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */ +#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */ +#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */ +#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */ + +#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ +#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ +#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1 ((uint8_t)0x01) /*!< DAC channel1 software trigger */ +#define DAC_SWTRIGR_SWTRIG2 ((uint8_t)0x02) /*!< DAC channel2 software trigger */ + +/***************** Bit definition for DAC_DHR12R1 register ******************/ +#define DAC_DHR12R1_DACC1DHR ((uint16_t)0x0FFF) /*!< DAC channel1 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L1 register ******************/ +#define DAC_DHR12L1_DACC1DHR ((uint16_t)0xFFF0) /*!< DAC channel1 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R1 register ******************/ +#define DAC_DHR8R1_DACC1DHR ((uint8_t)0xFF) /*!< DAC channel1 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12R2 register ******************/ +#define DAC_DHR12R2_DACC2DHR ((uint16_t)0x0FFF) /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12L2 register ******************/ +#define DAC_DHR12L2_DACC2DHR ((uint16_t)0xFFF0) /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8R2 register ******************/ +#define DAC_DHR8R2_DACC2DHR ((uint8_t)0xFF) /*!< DAC channel2 8-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12RD register ******************/ +#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */ +#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */ + +/***************** Bit definition for DAC_DHR12LD register ******************/ +#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */ +#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */ + +/****************** Bit definition for DAC_DHR8RD register ******************/ +#define DAC_DHR8RD_DACC1DHR ((uint16_t)0x00FF) /*!< DAC channel1 8-bit Right aligned data */ +#define DAC_DHR8RD_DACC2DHR ((uint16_t)0xFF00) /*!< DAC channel2 8-bit Right aligned data */ + +/******************* Bit definition for DAC_DOR1 register *******************/ +#define DAC_DOR1_DACC1DOR ((uint16_t)0x0FFF) /*!< DAC channel1 data output */ + +/******************* Bit definition for DAC_DOR2 register *******************/ +#define DAC_DOR2_DACC2DOR ((uint16_t)0x0FFF) /*!< DAC channel2 data output */ + +/******************** Bit definition for DAC_SR register ********************/ +#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */ +#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */ + +/******************************************************************************/ +/* */ +/* CEC */ +/* */ +/******************************************************************************/ +/******************** Bit definition for CEC_CFGR register ******************/ +#define CEC_CFGR_PE ((uint16_t)0x0001) /*!< Peripheral Enable */ +#define CEC_CFGR_IE ((uint16_t)0x0002) /*!< Interrupt Enable */ +#define CEC_CFGR_BTEM ((uint16_t)0x0004) /*!< Bit Timing Error Mode */ +#define CEC_CFGR_BPEM ((uint16_t)0x0008) /*!< Bit Period Error Mode */ + +/******************** Bit definition for CEC_OAR register ******************/ +#define CEC_OAR_OA ((uint16_t)0x000F) /*!< OA[3:0]: Own Address */ +#define CEC_OAR_OA_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define CEC_OAR_OA_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define CEC_OAR_OA_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define CEC_OAR_OA_3 ((uint16_t)0x0008) /*!< Bit 3 */ + +/******************** Bit definition for CEC_PRES register ******************/ +#define CEC_PRES_PRES ((uint16_t)0x3FFF) /*!< Prescaler Counter Value */ + +/******************** Bit definition for CEC_ESR register ******************/ +#define CEC_ESR_BTE ((uint16_t)0x0001) /*!< Bit Timing Error */ +#define CEC_ESR_BPE ((uint16_t)0x0002) /*!< Bit Period Error */ +#define CEC_ESR_RBTFE ((uint16_t)0x0004) /*!< Rx Block Transfer Finished Error */ +#define CEC_ESR_SBE ((uint16_t)0x0008) /*!< Start Bit Error */ +#define CEC_ESR_ACKE ((uint16_t)0x0010) /*!< Block Acknowledge Error */ +#define CEC_ESR_LINE ((uint16_t)0x0020) /*!< Line Error */ +#define CEC_ESR_TBTFE ((uint16_t)0x0040) /*!< Tx Block Transfer Finished Error */ + +/******************** Bit definition for CEC_CSR register ******************/ +#define CEC_CSR_TSOM ((uint16_t)0x0001) /*!< Tx Start Of Message */ +#define CEC_CSR_TEOM ((uint16_t)0x0002) /*!< Tx End Of Message */ +#define CEC_CSR_TERR ((uint16_t)0x0004) /*!< Tx Error */ +#define CEC_CSR_TBTRF ((uint16_t)0x0008) /*!< Tx Byte Transfer Request or Block Transfer Finished */ +#define CEC_CSR_RSOM ((uint16_t)0x0010) /*!< Rx Start Of Message */ +#define CEC_CSR_REOM ((uint16_t)0x0020) /*!< Rx End Of Message */ +#define CEC_CSR_RERR ((uint16_t)0x0040) /*!< Rx Error */ +#define CEC_CSR_RBTF ((uint16_t)0x0080) /*!< Rx Block Transfer Finished */ + +/******************** Bit definition for CEC_TXD register ******************/ +#define CEC_TXD_TXD ((uint16_t)0x00FF) /*!< Tx Data register */ + +/******************** Bit definition for CEC_RXD register ******************/ +#define CEC_RXD_RXD ((uint16_t)0x00FF) /*!< Rx Data register */ + +/******************************************************************************/ +/* */ +/* TIM */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for TIM_CR1 register ********************/ +#define TIM_CR1_CEN ((uint16_t)0x0001) /*!< Counter enable */ +#define TIM_CR1_UDIS ((uint16_t)0x0002) /*!< Update disable */ +#define TIM_CR1_URS ((uint16_t)0x0004) /*!< Update request source */ +#define TIM_CR1_OPM ((uint16_t)0x0008) /*!< One pulse mode */ +#define TIM_CR1_DIR ((uint16_t)0x0010) /*!< Direction */ + +#define TIM_CR1_CMS ((uint16_t)0x0060) /*!< CMS[1:0] bits (Center-aligned mode selection) */ +#define TIM_CR1_CMS_0 ((uint16_t)0x0020) /*!< Bit 0 */ +#define TIM_CR1_CMS_1 ((uint16_t)0x0040) /*!< Bit 1 */ + +#define TIM_CR1_ARPE ((uint16_t)0x0080) /*!< Auto-reload preload enable */ + +#define TIM_CR1_CKD ((uint16_t)0x0300) /*!< CKD[1:0] bits (clock division) */ +#define TIM_CR1_CKD_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CR1_CKD_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +/******************* Bit definition for TIM_CR2 register ********************/ +#define TIM_CR2_CCPC ((uint16_t)0x0001) /*!< Capture/Compare Preloaded Control */ +#define TIM_CR2_CCUS ((uint16_t)0x0004) /*!< Capture/Compare Control Update Selection */ +#define TIM_CR2_CCDS ((uint16_t)0x0008) /*!< Capture/Compare DMA Selection */ + +#define TIM_CR2_MMS ((uint16_t)0x0070) /*!< MMS[2:0] bits (Master Mode Selection) */ +#define TIM_CR2_MMS_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CR2_MMS_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CR2_MMS_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CR2_TI1S ((uint16_t)0x0080) /*!< TI1 Selection */ +#define TIM_CR2_OIS1 ((uint16_t)0x0100) /*!< Output Idle state 1 (OC1 output) */ +#define TIM_CR2_OIS1N ((uint16_t)0x0200) /*!< Output Idle state 1 (OC1N output) */ +#define TIM_CR2_OIS2 ((uint16_t)0x0400) /*!< Output Idle state 2 (OC2 output) */ +#define TIM_CR2_OIS2N ((uint16_t)0x0800) /*!< Output Idle state 2 (OC2N output) */ +#define TIM_CR2_OIS3 ((uint16_t)0x1000) /*!< Output Idle state 3 (OC3 output) */ +#define TIM_CR2_OIS3N ((uint16_t)0x2000) /*!< Output Idle state 3 (OC3N output) */ +#define TIM_CR2_OIS4 ((uint16_t)0x4000) /*!< Output Idle state 4 (OC4 output) */ + +/******************* Bit definition for TIM_SMCR register *******************/ +#define TIM_SMCR_SMS ((uint16_t)0x0007) /*!< SMS[2:0] bits (Slave mode selection) */ +#define TIM_SMCR_SMS_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_SMCR_SMS_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_SMCR_SMS_2 ((uint16_t)0x0004) /*!< Bit 2 */ + +#define TIM_SMCR_TS ((uint16_t)0x0070) /*!< TS[2:0] bits (Trigger selection) */ +#define TIM_SMCR_TS_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_SMCR_TS_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_SMCR_TS_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_SMCR_MSM ((uint16_t)0x0080) /*!< Master/slave mode */ + +#define TIM_SMCR_ETF ((uint16_t)0x0F00) /*!< ETF[3:0] bits (External trigger filter) */ +#define TIM_SMCR_ETF_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_SMCR_ETF_1 ((uint16_t)0x0200) /*!< Bit 1 */ +#define TIM_SMCR_ETF_2 ((uint16_t)0x0400) /*!< Bit 2 */ +#define TIM_SMCR_ETF_3 ((uint16_t)0x0800) /*!< Bit 3 */ + +#define TIM_SMCR_ETPS ((uint16_t)0x3000) /*!< ETPS[1:0] bits (External trigger prescaler) */ +#define TIM_SMCR_ETPS_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_SMCR_ETPS_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define TIM_SMCR_ECE ((uint16_t)0x4000) /*!< External clock enable */ +#define TIM_SMCR_ETP ((uint16_t)0x8000) /*!< External trigger polarity */ + +/******************* Bit definition for TIM_DIER register *******************/ +#define TIM_DIER_UIE ((uint16_t)0x0001) /*!< Update interrupt enable */ +#define TIM_DIER_CC1IE ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt enable */ +#define TIM_DIER_CC2IE ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt enable */ +#define TIM_DIER_CC3IE ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt enable */ +#define TIM_DIER_CC4IE ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt enable */ +#define TIM_DIER_COMIE ((uint16_t)0x0020) /*!< COM interrupt enable */ +#define TIM_DIER_TIE ((uint16_t)0x0040) /*!< Trigger interrupt enable */ +#define TIM_DIER_BIE ((uint16_t)0x0080) /*!< Break interrupt enable */ +#define TIM_DIER_UDE ((uint16_t)0x0100) /*!< Update DMA request enable */ +#define TIM_DIER_CC1DE ((uint16_t)0x0200) /*!< Capture/Compare 1 DMA request enable */ +#define TIM_DIER_CC2DE ((uint16_t)0x0400) /*!< Capture/Compare 2 DMA request enable */ +#define TIM_DIER_CC3DE ((uint16_t)0x0800) /*!< Capture/Compare 3 DMA request enable */ +#define TIM_DIER_CC4DE ((uint16_t)0x1000) /*!< Capture/Compare 4 DMA request enable */ +#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!< COM DMA request enable */ +#define TIM_DIER_TDE ((uint16_t)0x4000) /*!< Trigger DMA request enable */ + +/******************** Bit definition for TIM_SR register ********************/ +#define TIM_SR_UIF ((uint16_t)0x0001) /*!< Update interrupt Flag */ +#define TIM_SR_CC1IF ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt Flag */ +#define TIM_SR_CC2IF ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt Flag */ +#define TIM_SR_CC3IF ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt Flag */ +#define TIM_SR_CC4IF ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt Flag */ +#define TIM_SR_COMIF ((uint16_t)0x0020) /*!< COM interrupt Flag */ +#define TIM_SR_TIF ((uint16_t)0x0040) /*!< Trigger interrupt Flag */ +#define TIM_SR_BIF ((uint16_t)0x0080) /*!< Break interrupt Flag */ +#define TIM_SR_CC1OF ((uint16_t)0x0200) /*!< Capture/Compare 1 Overcapture Flag */ +#define TIM_SR_CC2OF ((uint16_t)0x0400) /*!< Capture/Compare 2 Overcapture Flag */ +#define TIM_SR_CC3OF ((uint16_t)0x0800) /*!< Capture/Compare 3 Overcapture Flag */ +#define TIM_SR_CC4OF ((uint16_t)0x1000) /*!< Capture/Compare 4 Overcapture Flag */ + +/******************* Bit definition for TIM_EGR register ********************/ +#define TIM_EGR_UG ((uint8_t)0x01) /*!< Update Generation */ +#define TIM_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation */ +#define TIM_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation */ +#define TIM_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation */ +#define TIM_EGR_CC4G ((uint8_t)0x10) /*!< Capture/Compare 4 Generation */ +#define TIM_EGR_COMG ((uint8_t)0x20) /*!< Capture/Compare Control Update Generation */ +#define TIM_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation */ +#define TIM_EGR_BG ((uint8_t)0x80) /*!< Break Generation */ + +/****************** Bit definition for TIM_CCMR1 register *******************/ +#define TIM_CCMR1_CC1S ((uint16_t)0x0003) /*!< CC1S[1:0] bits (Capture/Compare 1 Selection) */ +#define TIM_CCMR1_CC1S_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_CCMR1_CC1S_1 ((uint16_t)0x0002) /*!< Bit 1 */ + +#define TIM_CCMR1_OC1FE ((uint16_t)0x0004) /*!< Output Compare 1 Fast enable */ +#define TIM_CCMR1_OC1PE ((uint16_t)0x0008) /*!< Output Compare 1 Preload enable */ + +#define TIM_CCMR1_OC1M ((uint16_t)0x0070) /*!< OC1M[2:0] bits (Output Compare 1 Mode) */ +#define TIM_CCMR1_OC1M_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR1_OC1M_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR1_OC1M_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CCMR1_OC1CE ((uint16_t)0x0080) /*!< Output Compare 1Clear Enable */ + +#define TIM_CCMR1_CC2S ((uint16_t)0x0300) /*!< CC2S[1:0] bits (Capture/Compare 2 Selection) */ +#define TIM_CCMR1_CC2S_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CCMR1_CC2S_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_CCMR1_OC2FE ((uint16_t)0x0400) /*!< Output Compare 2 Fast enable */ +#define TIM_CCMR1_OC2PE ((uint16_t)0x0800) /*!< Output Compare 2 Preload enable */ + +#define TIM_CCMR1_OC2M ((uint16_t)0x7000) /*!< OC2M[2:0] bits (Output Compare 2 Mode) */ +#define TIM_CCMR1_OC2M_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR1_OC2M_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR1_OC2M_2 ((uint16_t)0x4000) /*!< Bit 2 */ + +#define TIM_CCMR1_OC2CE ((uint16_t)0x8000) /*!< Output Compare 2 Clear Enable */ + +/*----------------------------------------------------------------------------*/ + +#define TIM_CCMR1_IC1PSC ((uint16_t)0x000C) /*!< IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ +#define TIM_CCMR1_IC1PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */ +#define TIM_CCMR1_IC1PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */ + +#define TIM_CCMR1_IC1F ((uint16_t)0x00F0) /*!< IC1F[3:0] bits (Input Capture 1 Filter) */ +#define TIM_CCMR1_IC1F_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR1_IC1F_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR1_IC1F_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define TIM_CCMR1_IC1F_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define TIM_CCMR1_IC2PSC ((uint16_t)0x0C00) /*!< IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ +#define TIM_CCMR1_IC2PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define TIM_CCMR1_IC2PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define TIM_CCMR1_IC2F ((uint16_t)0xF000) /*!< IC2F[3:0] bits (Input Capture 2 Filter) */ +#define TIM_CCMR1_IC2F_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR1_IC2F_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR1_IC2F_2 ((uint16_t)0x4000) /*!< Bit 2 */ +#define TIM_CCMR1_IC2F_3 ((uint16_t)0x8000) /*!< Bit 3 */ + +/****************** Bit definition for TIM_CCMR2 register *******************/ +#define TIM_CCMR2_CC3S ((uint16_t)0x0003) /*!< CC3S[1:0] bits (Capture/Compare 3 Selection) */ +#define TIM_CCMR2_CC3S_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_CCMR2_CC3S_1 ((uint16_t)0x0002) /*!< Bit 1 */ + +#define TIM_CCMR2_OC3FE ((uint16_t)0x0004) /*!< Output Compare 3 Fast enable */ +#define TIM_CCMR2_OC3PE ((uint16_t)0x0008) /*!< Output Compare 3 Preload enable */ + +#define TIM_CCMR2_OC3M ((uint16_t)0x0070) /*!< OC3M[2:0] bits (Output Compare 3 Mode) */ +#define TIM_CCMR2_OC3M_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR2_OC3M_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR2_OC3M_2 ((uint16_t)0x0040) /*!< Bit 2 */ + +#define TIM_CCMR2_OC3CE ((uint16_t)0x0080) /*!< Output Compare 3 Clear Enable */ + +#define TIM_CCMR2_CC4S ((uint16_t)0x0300) /*!< CC4S[1:0] bits (Capture/Compare 4 Selection) */ +#define TIM_CCMR2_CC4S_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_CCMR2_CC4S_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_CCMR2_OC4FE ((uint16_t)0x0400) /*!< Output Compare 4 Fast enable */ +#define TIM_CCMR2_OC4PE ((uint16_t)0x0800) /*!< Output Compare 4 Preload enable */ + +#define TIM_CCMR2_OC4M ((uint16_t)0x7000) /*!< OC4M[2:0] bits (Output Compare 4 Mode) */ +#define TIM_CCMR2_OC4M_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR2_OC4M_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR2_OC4M_2 ((uint16_t)0x4000) /*!< Bit 2 */ + +#define TIM_CCMR2_OC4CE ((uint16_t)0x8000) /*!< Output Compare 4 Clear Enable */ + +/*----------------------------------------------------------------------------*/ + +#define TIM_CCMR2_IC3PSC ((uint16_t)0x000C) /*!< IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ +#define TIM_CCMR2_IC3PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */ +#define TIM_CCMR2_IC3PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */ + +#define TIM_CCMR2_IC3F ((uint16_t)0x00F0) /*!< IC3F[3:0] bits (Input Capture 3 Filter) */ +#define TIM_CCMR2_IC3F_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define TIM_CCMR2_IC3F_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define TIM_CCMR2_IC3F_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define TIM_CCMR2_IC3F_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define TIM_CCMR2_IC4PSC ((uint16_t)0x0C00) /*!< IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ +#define TIM_CCMR2_IC4PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define TIM_CCMR2_IC4PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define TIM_CCMR2_IC4F ((uint16_t)0xF000) /*!< IC4F[3:0] bits (Input Capture 4 Filter) */ +#define TIM_CCMR2_IC4F_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define TIM_CCMR2_IC4F_1 ((uint16_t)0x2000) /*!< Bit 1 */ +#define TIM_CCMR2_IC4F_2 ((uint16_t)0x4000) /*!< Bit 2 */ +#define TIM_CCMR2_IC4F_3 ((uint16_t)0x8000) /*!< Bit 3 */ + +/******************* Bit definition for TIM_CCER register *******************/ +#define TIM_CCER_CC1E ((uint16_t)0x0001) /*!< Capture/Compare 1 output enable */ +#define TIM_CCER_CC1P ((uint16_t)0x0002) /*!< Capture/Compare 1 output Polarity */ +#define TIM_CCER_CC1NE ((uint16_t)0x0004) /*!< Capture/Compare 1 Complementary output enable */ +#define TIM_CCER_CC1NP ((uint16_t)0x0008) /*!< Capture/Compare 1 Complementary output Polarity */ +#define TIM_CCER_CC2E ((uint16_t)0x0010) /*!< Capture/Compare 2 output enable */ +#define TIM_CCER_CC2P ((uint16_t)0x0020) /*!< Capture/Compare 2 output Polarity */ +#define TIM_CCER_CC2NE ((uint16_t)0x0040) /*!< Capture/Compare 2 Complementary output enable */ +#define TIM_CCER_CC2NP ((uint16_t)0x0080) /*!< Capture/Compare 2 Complementary output Polarity */ +#define TIM_CCER_CC3E ((uint16_t)0x0100) /*!< Capture/Compare 3 output enable */ +#define TIM_CCER_CC3P ((uint16_t)0x0200) /*!< Capture/Compare 3 output Polarity */ +#define TIM_CCER_CC3NE ((uint16_t)0x0400) /*!< Capture/Compare 3 Complementary output enable */ +#define TIM_CCER_CC3NP ((uint16_t)0x0800) /*!< Capture/Compare 3 Complementary output Polarity */ +#define TIM_CCER_CC4E ((uint16_t)0x1000) /*!< Capture/Compare 4 output enable */ +#define TIM_CCER_CC4P ((uint16_t)0x2000) /*!< Capture/Compare 4 output Polarity */ +#define TIM_CCER_CC4NP ((uint16_t)0x8000) /*!< Capture/Compare 4 Complementary output Polarity */ + +/******************* Bit definition for TIM_CNT register ********************/ +#define TIM_CNT_CNT ((uint16_t)0xFFFF) /*!< Counter Value */ + +/******************* Bit definition for TIM_PSC register ********************/ +#define TIM_PSC_PSC ((uint16_t)0xFFFF) /*!< Prescaler Value */ + +/******************* Bit definition for TIM_ARR register ********************/ +#define TIM_ARR_ARR ((uint16_t)0xFFFF) /*!< actual auto-reload Value */ + +/******************* Bit definition for TIM_RCR register ********************/ +#define TIM_RCR_REP ((uint8_t)0xFF) /*!< Repetition Counter Value */ + +/******************* Bit definition for TIM_CCR1 register *******************/ +#define TIM_CCR1_CCR1 ((uint16_t)0xFFFF) /*!< Capture/Compare 1 Value */ + +/******************* Bit definition for TIM_CCR2 register *******************/ +#define TIM_CCR2_CCR2 ((uint16_t)0xFFFF) /*!< Capture/Compare 2 Value */ + +/******************* Bit definition for TIM_CCR3 register *******************/ +#define TIM_CCR3_CCR3 ((uint16_t)0xFFFF) /*!< Capture/Compare 3 Value */ + +/******************* Bit definition for TIM_CCR4 register *******************/ +#define TIM_CCR4_CCR4 ((uint16_t)0xFFFF) /*!< Capture/Compare 4 Value */ + +/******************* Bit definition for TIM_BDTR register *******************/ +#define TIM_BDTR_DTG ((uint16_t)0x00FF) /*!< DTG[0:7] bits (Dead-Time Generator set-up) */ +#define TIM_BDTR_DTG_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_BDTR_DTG_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_BDTR_DTG_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define TIM_BDTR_DTG_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define TIM_BDTR_DTG_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define TIM_BDTR_DTG_5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define TIM_BDTR_DTG_6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define TIM_BDTR_DTG_7 ((uint16_t)0x0080) /*!< Bit 7 */ + +#define TIM_BDTR_LOCK ((uint16_t)0x0300) /*!< LOCK[1:0] bits (Lock Configuration) */ +#define TIM_BDTR_LOCK_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_BDTR_LOCK_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define TIM_BDTR_OSSI ((uint16_t)0x0400) /*!< Off-State Selection for Idle mode */ +#define TIM_BDTR_OSSR ((uint16_t)0x0800) /*!< Off-State Selection for Run mode */ +#define TIM_BDTR_BKE ((uint16_t)0x1000) /*!< Break enable */ +#define TIM_BDTR_BKP ((uint16_t)0x2000) /*!< Break Polarity */ +#define TIM_BDTR_AOE ((uint16_t)0x4000) /*!< Automatic Output enable */ +#define TIM_BDTR_MOE ((uint16_t)0x8000) /*!< Main Output enable */ + +/******************* Bit definition for TIM_DCR register ********************/ +#define TIM_DCR_DBA ((uint16_t)0x001F) /*!< DBA[4:0] bits (DMA Base Address) */ +#define TIM_DCR_DBA_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define TIM_DCR_DBA_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define TIM_DCR_DBA_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define TIM_DCR_DBA_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define TIM_DCR_DBA_4 ((uint16_t)0x0010) /*!< Bit 4 */ + +#define TIM_DCR_DBL ((uint16_t)0x1F00) /*!< DBL[4:0] bits (DMA Burst Length) */ +#define TIM_DCR_DBL_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define TIM_DCR_DBL_1 ((uint16_t)0x0200) /*!< Bit 1 */ +#define TIM_DCR_DBL_2 ((uint16_t)0x0400) /*!< Bit 2 */ +#define TIM_DCR_DBL_3 ((uint16_t)0x0800) /*!< Bit 3 */ +#define TIM_DCR_DBL_4 ((uint16_t)0x1000) /*!< Bit 4 */ + +/******************* Bit definition for TIM_DMAR register *******************/ +#define TIM_DMAR_DMAB ((uint16_t)0xFFFF) /*!< DMA register for burst accesses */ + +/******************************************************************************/ +/* */ +/* Real-Time Clock */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for RTC_CRH register ********************/ +#define RTC_CRH_SECIE ((uint8_t)0x01) /*!< Second Interrupt Enable */ +#define RTC_CRH_ALRIE ((uint8_t)0x02) /*!< Alarm Interrupt Enable */ +#define RTC_CRH_OWIE ((uint8_t)0x04) /*!< OverfloW Interrupt Enable */ + +/******************* Bit definition for RTC_CRL register ********************/ +#define RTC_CRL_SECF ((uint8_t)0x01) /*!< Second Flag */ +#define RTC_CRL_ALRF ((uint8_t)0x02) /*!< Alarm Flag */ +#define RTC_CRL_OWF ((uint8_t)0x04) /*!< OverfloW Flag */ +#define RTC_CRL_RSF ((uint8_t)0x08) /*!< Registers Synchronized Flag */ +#define RTC_CRL_CNF ((uint8_t)0x10) /*!< Configuration Flag */ +#define RTC_CRL_RTOFF ((uint8_t)0x20) /*!< RTC operation OFF */ + +/******************* Bit definition for RTC_PRLH register *******************/ +#define RTC_PRLH_PRL ((uint16_t)0x000F) /*!< RTC Prescaler Reload Value High */ + +/******************* Bit definition for RTC_PRLL register *******************/ +#define RTC_PRLL_PRL ((uint16_t)0xFFFF) /*!< RTC Prescaler Reload Value Low */ + +/******************* Bit definition for RTC_DIVH register *******************/ +#define RTC_DIVH_RTC_DIV ((uint16_t)0x000F) /*!< RTC Clock Divider High */ + +/******************* Bit definition for RTC_DIVL register *******************/ +#define RTC_DIVL_RTC_DIV ((uint16_t)0xFFFF) /*!< RTC Clock Divider Low */ + +/******************* Bit definition for RTC_CNTH register *******************/ +#define RTC_CNTH_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter High */ + +/******************* Bit definition for RTC_CNTL register *******************/ +#define RTC_CNTL_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter Low */ + +/******************* Bit definition for RTC_ALRH register *******************/ +#define RTC_ALRH_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm High */ + +/******************* Bit definition for RTC_ALRL register *******************/ +#define RTC_ALRL_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm Low */ + +/******************************************************************************/ +/* */ +/* Independent WATCHDOG */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for IWDG_KR register ********************/ +#define IWDG_KR_KEY ((uint16_t)0xFFFF) /*!< Key value (write only, read 0000h) */ + +/******************* Bit definition for IWDG_PR register ********************/ +#define IWDG_PR_PR ((uint8_t)0x07) /*!< PR[2:0] (Prescaler divider) */ +#define IWDG_PR_PR_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define IWDG_PR_PR_1 ((uint8_t)0x02) /*!< Bit 1 */ +#define IWDG_PR_PR_2 ((uint8_t)0x04) /*!< Bit 2 */ + +/******************* Bit definition for IWDG_RLR register *******************/ +#define IWDG_RLR_RL ((uint16_t)0x0FFF) /*!< Watchdog counter reload value */ + +/******************* Bit definition for IWDG_SR register ********************/ +#define IWDG_SR_PVU ((uint8_t)0x01) /*!< Watchdog prescaler value update */ +#define IWDG_SR_RVU ((uint8_t)0x02) /*!< Watchdog counter reload value update */ + +/******************************************************************************/ +/* */ +/* Window WATCHDOG */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for WWDG_CR register ********************/ +#define WWDG_CR_T ((uint8_t)0x7F) /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */ +#define WWDG_CR_T0 ((uint8_t)0x01) /*!< Bit 0 */ +#define WWDG_CR_T1 ((uint8_t)0x02) /*!< Bit 1 */ +#define WWDG_CR_T2 ((uint8_t)0x04) /*!< Bit 2 */ +#define WWDG_CR_T3 ((uint8_t)0x08) /*!< Bit 3 */ +#define WWDG_CR_T4 ((uint8_t)0x10) /*!< Bit 4 */ +#define WWDG_CR_T5 ((uint8_t)0x20) /*!< Bit 5 */ +#define WWDG_CR_T6 ((uint8_t)0x40) /*!< Bit 6 */ + +#define WWDG_CR_WDGA ((uint8_t)0x80) /*!< Activation bit */ + +/******************* Bit definition for WWDG_CFR register *******************/ +#define WWDG_CFR_W ((uint16_t)0x007F) /*!< W[6:0] bits (7-bit window value) */ +#define WWDG_CFR_W0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define WWDG_CFR_W1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define WWDG_CFR_W2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define WWDG_CFR_W3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define WWDG_CFR_W4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define WWDG_CFR_W5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define WWDG_CFR_W6 ((uint16_t)0x0040) /*!< Bit 6 */ + +#define WWDG_CFR_WDGTB ((uint16_t)0x0180) /*!< WDGTB[1:0] bits (Timer Base) */ +#define WWDG_CFR_WDGTB0 ((uint16_t)0x0080) /*!< Bit 0 */ +#define WWDG_CFR_WDGTB1 ((uint16_t)0x0100) /*!< Bit 1 */ + +#define WWDG_CFR_EWI ((uint16_t)0x0200) /*!< Early Wakeup Interrupt */ + +/******************* Bit definition for WWDG_SR register ********************/ +#define WWDG_SR_EWIF ((uint8_t)0x01) /*!< Early Wakeup Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Flexible Static Memory Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for FSMC_BCR1 register *******************/ +#define FSMC_BCR1_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR1_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR1_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR1_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR1_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR1_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR1_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR1_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR1_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR1_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR1_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR1_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR1_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR1_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR1_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR1_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR1_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR1_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR2 register *******************/ +#define FSMC_BCR2_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR2_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR2_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR2_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR2_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR2_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR2_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR2_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR2_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR2_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR2_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR2_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR2_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR2_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR2_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR2_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR2_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR2_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR3 register *******************/ +#define FSMC_BCR3_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR3_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR3_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR3_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR3_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR3_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR3_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR3_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR3_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR3_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR3_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit. */ +#define FSMC_BCR3_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR3_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR3_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR3_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR3_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR3_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR3_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BCR4 register *******************/ +#define FSMC_BCR4_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */ +#define FSMC_BCR4_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */ + +#define FSMC_BCR4_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */ +#define FSMC_BCR4_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define FSMC_BCR4_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define FSMC_BCR4_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */ +#define FSMC_BCR4_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BCR4_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_BCR4_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */ +#define FSMC_BCR4_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */ +#define FSMC_BCR4_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */ +#define FSMC_BCR4_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */ +#define FSMC_BCR4_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */ +#define FSMC_BCR4_WREN ((uint32_t)0x00001000) /*!< Write enable bit */ +#define FSMC_BCR4_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */ +#define FSMC_BCR4_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */ +#define FSMC_BCR4_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */ +#define FSMC_BCR4_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */ + +/****************** Bit definition for FSMC_BTR1 register ******************/ +#define FSMC_BTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR1_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR1_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR1_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR1_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR1_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BTR2 register *******************/ +#define FSMC_BTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR2_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR2_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR2_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR2_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR2_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/******************* Bit definition for FSMC_BTR3 register *******************/ +#define FSMC_BTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR3_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR3_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR3_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR3_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR3_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BTR4 register *******************/ +#define FSMC_BTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BTR4_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */ +#define FSMC_BTR4_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_BTR4_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_BTR4_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_BTR4_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */ + +#define FSMC_BTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR1 register ******************/ +#define FSMC_BWTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR2 register ******************/ +#define FSMC_BWTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1*/ +#define FSMC_BWTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR3 register ******************/ +#define FSMC_BWTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_BWTR4 register ******************/ +#define FSMC_BWTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */ +#define FSMC_BWTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_BWTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_BWTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_BWTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + +#define FSMC_BWTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */ +#define FSMC_BWTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_BWTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define FSMC_BWTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define FSMC_BWTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define FSMC_BWTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */ +#define FSMC_BWTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_BWTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_BWTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_BWTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + +#define FSMC_BWTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */ +#define FSMC_BWTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define FSMC_BWTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */ +#define FSMC_BWTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */ +#define FSMC_BWTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */ + +#define FSMC_BWTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */ +#define FSMC_BWTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_BWTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_BWTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_BWTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + +#define FSMC_BWTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */ +#define FSMC_BWTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define FSMC_BWTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +/****************** Bit definition for FSMC_PCR2 register *******************/ +#define FSMC_PCR2_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR2_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR2_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR2_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR2_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR2_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR2_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR2_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR2_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR2_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR2_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR2_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR2_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR2_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR2_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR2_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR2_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR2_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[1:0] bits (ECC page size) */ +#define FSMC_PCR2_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR2_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR2_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/****************** Bit definition for FSMC_PCR3 register *******************/ +#define FSMC_PCR3_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR3_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR3_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR3_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR3_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR3_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR3_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR3_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR3_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR3_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR3_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR3_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR3_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR3_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR3_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR3_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR3_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR3_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */ +#define FSMC_PCR3_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR3_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR3_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/****************** Bit definition for FSMC_PCR4 register *******************/ +#define FSMC_PCR4_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */ +#define FSMC_PCR4_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */ +#define FSMC_PCR4_PTYP ((uint32_t)0x00000008) /*!< Memory type */ + +#define FSMC_PCR4_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */ +#define FSMC_PCR4_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define FSMC_PCR4_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define FSMC_PCR4_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */ + +#define FSMC_PCR4_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */ +#define FSMC_PCR4_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */ +#define FSMC_PCR4_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */ +#define FSMC_PCR4_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */ +#define FSMC_PCR4_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */ + +#define FSMC_PCR4_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */ +#define FSMC_PCR4_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define FSMC_PCR4_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */ +#define FSMC_PCR4_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */ +#define FSMC_PCR4_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */ + +#define FSMC_PCR4_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */ +#define FSMC_PCR4_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */ +#define FSMC_PCR4_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */ +#define FSMC_PCR4_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */ + +/******************* Bit definition for FSMC_SR2 register *******************/ +#define FSMC_SR2_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR2_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR2_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR2_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR2_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR2_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR2_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/******************* Bit definition for FSMC_SR3 register *******************/ +#define FSMC_SR3_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR3_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR3_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR3_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR3_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR3_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR3_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/******************* Bit definition for FSMC_SR4 register *******************/ +#define FSMC_SR4_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */ +#define FSMC_SR4_ILS ((uint8_t)0x02) /*!< Interrupt Level status */ +#define FSMC_SR4_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */ +#define FSMC_SR4_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */ +#define FSMC_SR4_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */ +#define FSMC_SR4_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */ +#define FSMC_SR4_FEMPT ((uint8_t)0x40) /*!< FIFO empty */ + +/****************** Bit definition for FSMC_PMEM2 register ******************/ +#define FSMC_PMEM2_MEMSET2 ((uint32_t)0x000000FF) /*!< MEMSET2[7:0] bits (Common memory 2 setup time) */ +#define FSMC_PMEM2_MEMSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMWAIT2 ((uint32_t)0x0000FF00) /*!< MEMWAIT2[7:0] bits (Common memory 2 wait time) */ +#define FSMC_PMEM2_MEMWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMHOLD2 ((uint32_t)0x00FF0000) /*!< MEMHOLD2[7:0] bits (Common memory 2 hold time) */ +#define FSMC_PMEM2_MEMHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM2_MEMHIZ2 ((uint32_t)0xFF000000) /*!< MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */ +#define FSMC_PMEM2_MEMHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM2_MEMHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM2_MEMHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM2_MEMHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM2_MEMHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM2_MEMHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM2_MEMHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM2_MEMHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PMEM3 register ******************/ +#define FSMC_PMEM3_MEMSET3 ((uint32_t)0x000000FF) /*!< MEMSET3[7:0] bits (Common memory 3 setup time) */ +#define FSMC_PMEM3_MEMSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMWAIT3 ((uint32_t)0x0000FF00) /*!< MEMWAIT3[7:0] bits (Common memory 3 wait time) */ +#define FSMC_PMEM3_MEMWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMHOLD3 ((uint32_t)0x00FF0000) /*!< MEMHOLD3[7:0] bits (Common memory 3 hold time) */ +#define FSMC_PMEM3_MEMHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM3_MEMHIZ3 ((uint32_t)0xFF000000) /*!< MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */ +#define FSMC_PMEM3_MEMHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM3_MEMHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM3_MEMHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM3_MEMHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM3_MEMHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM3_MEMHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM3_MEMHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM3_MEMHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PMEM4 register ******************/ +#define FSMC_PMEM4_MEMSET4 ((uint32_t)0x000000FF) /*!< MEMSET4[7:0] bits (Common memory 4 setup time) */ +#define FSMC_PMEM4_MEMSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMWAIT4 ((uint32_t)0x0000FF00) /*!< MEMWAIT4[7:0] bits (Common memory 4 wait time) */ +#define FSMC_PMEM4_MEMWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMHOLD4 ((uint32_t)0x00FF0000) /*!< MEMHOLD4[7:0] bits (Common memory 4 hold time) */ +#define FSMC_PMEM4_MEMHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PMEM4_MEMHIZ4 ((uint32_t)0xFF000000) /*!< MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */ +#define FSMC_PMEM4_MEMHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PMEM4_MEMHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PMEM4_MEMHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PMEM4_MEMHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PMEM4_MEMHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PMEM4_MEMHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PMEM4_MEMHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PMEM4_MEMHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT2 register ******************/ +#define FSMC_PATT2_ATTSET2 ((uint32_t)0x000000FF) /*!< ATTSET2[7:0] bits (Attribute memory 2 setup time) */ +#define FSMC_PATT2_ATTSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT2_ATTSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT2_ATTSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT2_ATTSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT2_ATTSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT2_ATTSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT2_ATTSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT2_ATTSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTWAIT2 ((uint32_t)0x0000FF00) /*!< ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */ +#define FSMC_PATT2_ATTWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT2_ATTWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT2_ATTWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT2_ATTWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT2_ATTWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTHOLD2 ((uint32_t)0x00FF0000) /*!< ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */ +#define FSMC_PATT2_ATTHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT2_ATTHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT2_ATTHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT2_ATTHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT2_ATTHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT2_ATTHIZ2 ((uint32_t)0xFF000000) /*!< ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */ +#define FSMC_PATT2_ATTHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT2_ATTHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT2_ATTHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT2_ATTHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT2_ATTHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT2_ATTHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT2_ATTHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT2_ATTHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT3 register ******************/ +#define FSMC_PATT3_ATTSET3 ((uint32_t)0x000000FF) /*!< ATTSET3[7:0] bits (Attribute memory 3 setup time) */ +#define FSMC_PATT3_ATTSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT3_ATTSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT3_ATTSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT3_ATTSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT3_ATTSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT3_ATTSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT3_ATTSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT3_ATTSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTWAIT3 ((uint32_t)0x0000FF00) /*!< ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */ +#define FSMC_PATT3_ATTWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT3_ATTWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT3_ATTWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT3_ATTWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT3_ATTWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTHOLD3 ((uint32_t)0x00FF0000) /*!< ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */ +#define FSMC_PATT3_ATTHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT3_ATTHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT3_ATTHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT3_ATTHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT3_ATTHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT3_ATTHIZ3 ((uint32_t)0xFF000000) /*!< ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */ +#define FSMC_PATT3_ATTHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT3_ATTHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT3_ATTHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT3_ATTHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT3_ATTHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT3_ATTHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT3_ATTHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT3_ATTHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PATT4 register ******************/ +#define FSMC_PATT4_ATTSET4 ((uint32_t)0x000000FF) /*!< ATTSET4[7:0] bits (Attribute memory 4 setup time) */ +#define FSMC_PATT4_ATTSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PATT4_ATTSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PATT4_ATTSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PATT4_ATTSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PATT4_ATTSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PATT4_ATTSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PATT4_ATTSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PATT4_ATTSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTWAIT4 ((uint32_t)0x0000FF00) /*!< ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */ +#define FSMC_PATT4_ATTWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PATT4_ATTWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PATT4_ATTWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PATT4_ATTWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PATT4_ATTWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTHOLD4 ((uint32_t)0x00FF0000) /*!< ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */ +#define FSMC_PATT4_ATTHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PATT4_ATTHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PATT4_ATTHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PATT4_ATTHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PATT4_ATTHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PATT4_ATTHIZ4 ((uint32_t)0xFF000000) /*!< ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */ +#define FSMC_PATT4_ATTHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PATT4_ATTHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PATT4_ATTHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PATT4_ATTHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PATT4_ATTHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PATT4_ATTHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PATT4_ATTHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PATT4_ATTHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_PIO4 register *******************/ +#define FSMC_PIO4_IOSET4 ((uint32_t)0x000000FF) /*!< IOSET4[7:0] bits (I/O 4 setup time) */ +#define FSMC_PIO4_IOSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define FSMC_PIO4_IOSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */ +#define FSMC_PIO4_IOSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */ +#define FSMC_PIO4_IOSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */ +#define FSMC_PIO4_IOSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */ +#define FSMC_PIO4_IOSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */ +#define FSMC_PIO4_IOSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */ +#define FSMC_PIO4_IOSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */ + +#define FSMC_PIO4_IOWAIT4 ((uint32_t)0x0000FF00) /*!< IOWAIT4[7:0] bits (I/O 4 wait time) */ +#define FSMC_PIO4_IOWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define FSMC_PIO4_IOWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define FSMC_PIO4_IOWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */ +#define FSMC_PIO4_IOWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */ +#define FSMC_PIO4_IOWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */ +#define FSMC_PIO4_IOWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */ +#define FSMC_PIO4_IOWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */ +#define FSMC_PIO4_IOWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */ + +#define FSMC_PIO4_IOHOLD4 ((uint32_t)0x00FF0000) /*!< IOHOLD4[7:0] bits (I/O 4 hold time) */ +#define FSMC_PIO4_IOHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define FSMC_PIO4_IOHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define FSMC_PIO4_IOHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define FSMC_PIO4_IOHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define FSMC_PIO4_IOHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define FSMC_PIO4_IOHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define FSMC_PIO4_IOHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define FSMC_PIO4_IOHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */ + +#define FSMC_PIO4_IOHIZ4 ((uint32_t)0xFF000000) /*!< IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */ +#define FSMC_PIO4_IOHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define FSMC_PIO4_IOHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define FSMC_PIO4_IOHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */ +#define FSMC_PIO4_IOHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */ +#define FSMC_PIO4_IOHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */ +#define FSMC_PIO4_IOHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */ +#define FSMC_PIO4_IOHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */ +#define FSMC_PIO4_IOHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */ + +/****************** Bit definition for FSMC_ECCR2 register ******************/ +#define FSMC_ECCR2_ECC2 ((uint32_t)0xFFFFFFFF) /*!< ECC result */ + +/****************** Bit definition for FSMC_ECCR3 register ******************/ +#define FSMC_ECCR3_ECC3 ((uint32_t)0xFFFFFFFF) /*!< ECC result */ + +/******************************************************************************/ +/* */ +/* SD host Interface */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for SDIO_POWER register ******************/ +#define SDIO_POWER_PWRCTRL ((uint8_t)0x03) /*!< PWRCTRL[1:0] bits (Power supply control bits) */ +#define SDIO_POWER_PWRCTRL_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define SDIO_POWER_PWRCTRL_1 ((uint8_t)0x02) /*!< Bit 1 */ + +/****************** Bit definition for SDIO_CLKCR register ******************/ +#define SDIO_CLKCR_CLKDIV ((uint16_t)0x00FF) /*!< Clock divide factor */ +#define SDIO_CLKCR_CLKEN ((uint16_t)0x0100) /*!< Clock enable bit */ +#define SDIO_CLKCR_PWRSAV ((uint16_t)0x0200) /*!< Power saving configuration bit */ +#define SDIO_CLKCR_BYPASS ((uint16_t)0x0400) /*!< Clock divider bypass enable bit */ + +#define SDIO_CLKCR_WIDBUS ((uint16_t)0x1800) /*!< WIDBUS[1:0] bits (Wide bus mode enable bit) */ +#define SDIO_CLKCR_WIDBUS_0 ((uint16_t)0x0800) /*!< Bit 0 */ +#define SDIO_CLKCR_WIDBUS_1 ((uint16_t)0x1000) /*!< Bit 1 */ + +#define SDIO_CLKCR_NEGEDGE ((uint16_t)0x2000) /*!< SDIO_CK dephasing selection bit */ +#define SDIO_CLKCR_HWFC_EN ((uint16_t)0x4000) /*!< HW Flow Control enable */ + +/******************* Bit definition for SDIO_ARG register *******************/ +#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!< Command argument */ + +/******************* Bit definition for SDIO_CMD register *******************/ +#define SDIO_CMD_CMDINDEX ((uint16_t)0x003F) /*!< Command Index */ + +#define SDIO_CMD_WAITRESP ((uint16_t)0x00C0) /*!< WAITRESP[1:0] bits (Wait for response bits) */ +#define SDIO_CMD_WAITRESP_0 ((uint16_t)0x0040) /*!< Bit 0 */ +#define SDIO_CMD_WAITRESP_1 ((uint16_t)0x0080) /*!< Bit 1 */ + +#define SDIO_CMD_WAITINT ((uint16_t)0x0100) /*!< CPSM Waits for Interrupt Request */ +#define SDIO_CMD_WAITPEND ((uint16_t)0x0200) /*!< CPSM Waits for ends of data transfer (CmdPend internal signal) */ +#define SDIO_CMD_CPSMEN ((uint16_t)0x0400) /*!< Command path state machine (CPSM) Enable bit */ +#define SDIO_CMD_SDIOSUSPEND ((uint16_t)0x0800) /*!< SD I/O suspend command */ +#define SDIO_CMD_ENCMDCOMPL ((uint16_t)0x1000) /*!< Enable CMD completion */ +#define SDIO_CMD_NIEN ((uint16_t)0x2000) /*!< Not Interrupt Enable */ +#define SDIO_CMD_CEATACMD ((uint16_t)0x4000) /*!< CE-ATA command */ + +/***************** Bit definition for SDIO_RESPCMD register *****************/ +#define SDIO_RESPCMD_RESPCMD ((uint8_t)0x3F) /*!< Response command index */ + +/****************** Bit definition for SDIO_RESP0 register ******************/ +#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP1 register ******************/ +#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP2 register ******************/ +#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP3 register ******************/ +#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_RESP4 register ******************/ +#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!< Card Status */ + +/****************** Bit definition for SDIO_DTIMER register *****************/ +#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!< Data timeout period. */ + +/****************** Bit definition for SDIO_DLEN register *******************/ +#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!< Data length value */ + +/****************** Bit definition for SDIO_DCTRL register ******************/ +#define SDIO_DCTRL_DTEN ((uint16_t)0x0001) /*!< Data transfer enabled bit */ +#define SDIO_DCTRL_DTDIR ((uint16_t)0x0002) /*!< Data transfer direction selection */ +#define SDIO_DCTRL_DTMODE ((uint16_t)0x0004) /*!< Data transfer mode selection */ +#define SDIO_DCTRL_DMAEN ((uint16_t)0x0008) /*!< DMA enabled bit */ + +#define SDIO_DCTRL_DBLOCKSIZE ((uint16_t)0x00F0) /*!< DBLOCKSIZE[3:0] bits (Data block size) */ +#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint16_t)0x0020) /*!< Bit 1 */ +#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint16_t)0x0040) /*!< Bit 2 */ +#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint16_t)0x0080) /*!< Bit 3 */ + +#define SDIO_DCTRL_RWSTART ((uint16_t)0x0100) /*!< Read wait start */ +#define SDIO_DCTRL_RWSTOP ((uint16_t)0x0200) /*!< Read wait stop */ +#define SDIO_DCTRL_RWMOD ((uint16_t)0x0400) /*!< Read wait mode */ +#define SDIO_DCTRL_SDIOEN ((uint16_t)0x0800) /*!< SD I/O enable functions */ + +/****************** Bit definition for SDIO_DCOUNT register *****************/ +#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!< Data count value */ + +/****************** Bit definition for SDIO_STA register ********************/ +#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!< Command response received (CRC check failed) */ +#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!< Data block sent/received (CRC check failed) */ +#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!< Command response timeout */ +#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!< Data timeout */ +#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!< Transmit FIFO underrun error */ +#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!< Received FIFO overrun error */ +#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!< Command response received (CRC check passed) */ +#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!< Command sent (no response required) */ +#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!< Data end (data counter, SDIDCOUNT, is zero) */ +#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!< Start bit not detected on all data signals in wide bus mode */ +#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!< Data block sent/received (CRC check passed) */ +#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!< Command transfer in progress */ +#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!< Data transmit in progress */ +#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!< Data receive in progress */ +#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!< Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */ +#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!< Receive FIFO Half Full: there are at least 8 words in the FIFO */ +#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!< Transmit FIFO full */ +#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!< Receive FIFO full */ +#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!< Transmit FIFO empty */ +#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!< Receive FIFO empty */ +#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!< Data available in transmit FIFO */ +#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!< Data available in receive FIFO */ +#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!< SDIO interrupt received */ +#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received for CMD61 */ + +/******************* Bit definition for SDIO_ICR register *******************/ +#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!< CCRCFAIL flag clear bit */ +#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!< DCRCFAIL flag clear bit */ +#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!< CTIMEOUT flag clear bit */ +#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!< DTIMEOUT flag clear bit */ +#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!< TXUNDERR flag clear bit */ +#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!< RXOVERR flag clear bit */ +#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!< CMDREND flag clear bit */ +#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!< CMDSENT flag clear bit */ +#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!< DATAEND flag clear bit */ +#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!< STBITERR flag clear bit */ +#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!< DBCKEND flag clear bit */ +#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!< SDIOIT flag clear bit */ +#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!< CEATAEND flag clear bit */ + +/****************** Bit definition for SDIO_MASK register *******************/ +#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!< Command CRC Fail Interrupt Enable */ +#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!< Data CRC Fail Interrupt Enable */ +#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!< Command TimeOut Interrupt Enable */ +#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!< Data TimeOut Interrupt Enable */ +#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!< Tx FIFO UnderRun Error Interrupt Enable */ +#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!< Rx FIFO OverRun Error Interrupt Enable */ +#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!< Command Response Received Interrupt Enable */ +#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!< Command Sent Interrupt Enable */ +#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!< Data End Interrupt Enable */ +#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!< Start Bit Error Interrupt Enable */ +#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!< Data Block End Interrupt Enable */ +#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!< Command Acting Interrupt Enable */ +#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!< Data Transmit Acting Interrupt Enable */ +#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!< Data receive acting interrupt enabled */ +#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!< Tx FIFO Half Empty interrupt Enable */ +#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!< Rx FIFO Half Full interrupt Enable */ +#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!< Tx FIFO Full interrupt Enable */ +#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!< Rx FIFO Full interrupt Enable */ +#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!< Tx FIFO Empty interrupt Enable */ +#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!< Rx FIFO Empty interrupt Enable */ +#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!< Data available in Tx FIFO interrupt Enable */ +#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!< Data available in Rx FIFO interrupt Enable */ +#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!< SDIO Mode Interrupt Received interrupt Enable */ +#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received Interrupt Enable */ + +/***************** Bit definition for SDIO_FIFOCNT register *****************/ +#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!< Remaining number of words to be written to or read from the FIFO */ + +/****************** Bit definition for SDIO_FIFO register *******************/ +#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!< Receive and transmit FIFO data */ + +/******************************************************************************/ +/* */ +/* USB Device FS */ +/* */ +/******************************************************************************/ + +/*!< Endpoint-specific registers */ +/******************* Bit definition for USB_EP0R register *******************/ +#define USB_EP0R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP0R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP0R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP0R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP0R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP0R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP0R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP0R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP0R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP0R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP0R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP0R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP0R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP0R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP0R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP0R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP1R register *******************/ +#define USB_EP1R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP1R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP1R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP1R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP1R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP1R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP1R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP1R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP1R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP1R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP1R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP1R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP1R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP1R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP1R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP1R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP2R register *******************/ +#define USB_EP2R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP2R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP2R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP2R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP2R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP2R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP2R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP2R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP2R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP2R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP2R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP2R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP2R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP2R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP2R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP2R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP3R register *******************/ +#define USB_EP3R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP3R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP3R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP3R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP3R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP3R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP3R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP3R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP3R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP3R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP3R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP3R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP3R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP3R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP3R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP3R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP4R register *******************/ +#define USB_EP4R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP4R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP4R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP4R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP4R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP4R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP4R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP4R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP4R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP4R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP4R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP4R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP4R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP4R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP4R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP4R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP5R register *******************/ +#define USB_EP5R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP5R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP5R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP5R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP5R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP5R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP5R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP5R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP5R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP5R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP5R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP5R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP5R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP5R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP5R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP5R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP6R register *******************/ +#define USB_EP6R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP6R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP6R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP6R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP6R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP6R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP6R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP6R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP6R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP6R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP6R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP6R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP6R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP6R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP6R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP6R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/******************* Bit definition for USB_EP7R register *******************/ +#define USB_EP7R_EA ((uint16_t)0x000F) /*!< Endpoint Address */ + +#define USB_EP7R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ +#define USB_EP7R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define USB_EP7R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define USB_EP7R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */ +#define USB_EP7R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */ +#define USB_EP7R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */ + +#define USB_EP7R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */ +#define USB_EP7R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */ +#define USB_EP7R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */ + +#define USB_EP7R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */ + +#define USB_EP7R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ +#define USB_EP7R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USB_EP7R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USB_EP7R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */ +#define USB_EP7R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */ + +/*!< Common registers */ +/******************* Bit definition for USB_CNTR register *******************/ +#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB Reset */ +#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power down */ +#define USB_CNTR_LP_MODE ((uint16_t)0x0004) /*!< Low-power mode */ +#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force suspend */ +#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< Resume request */ +#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Interrupt Mask */ +#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Interrupt Mask */ +#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Interrupt Mask */ +#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< Suspend mode Interrupt Mask */ +#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< Wakeup Interrupt Mask */ +#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< Error Interrupt Mask */ +#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun Interrupt Mask */ +#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct Transfer Interrupt Mask */ + +/******************* Bit definition for USB_ISTR register *******************/ +#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< Endpoint Identifier */ +#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< Direction of transaction */ +#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame */ +#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame */ +#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< USB RESET request */ +#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< Suspend mode request */ +#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< Wake up */ +#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< Error */ +#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun */ +#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct Transfer */ + +/******************* Bit definition for USB_FNR register ********************/ +#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */ +#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */ +#define USB_FNR_LCK ((uint16_t)0x2000) /*!< Locked */ +#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< Receive Data - Line Status */ +#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< Receive Data + Line Status */ + +/****************** Bit definition for USB_DADDR register *******************/ +#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< ADD[6:0] bits (Device Address) */ +#define USB_DADDR_ADD0 ((uint8_t)0x01) /*!< Bit 0 */ +#define USB_DADDR_ADD1 ((uint8_t)0x02) /*!< Bit 1 */ +#define USB_DADDR_ADD2 ((uint8_t)0x04) /*!< Bit 2 */ +#define USB_DADDR_ADD3 ((uint8_t)0x08) /*!< Bit 3 */ +#define USB_DADDR_ADD4 ((uint8_t)0x10) /*!< Bit 4 */ +#define USB_DADDR_ADD5 ((uint8_t)0x20) /*!< Bit 5 */ +#define USB_DADDR_ADD6 ((uint8_t)0x40) /*!< Bit 6 */ + +#define USB_DADDR_EF ((uint8_t)0x80) /*!< Enable Function */ + +/****************** Bit definition for USB_BTABLE register ******************/ +#define USB_BTABLE_BTABLE ((uint16_t)0xFFF8) /*!< Buffer Table */ + +/*!< Buffer descriptor table */ +/***************** Bit definition for USB_ADDR0_TX register *****************/ +#define USB_ADDR0_TX_ADDR0_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 0 */ + +/***************** Bit definition for USB_ADDR1_TX register *****************/ +#define USB_ADDR1_TX_ADDR1_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 1 */ + +/***************** Bit definition for USB_ADDR2_TX register *****************/ +#define USB_ADDR2_TX_ADDR2_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 2 */ + +/***************** Bit definition for USB_ADDR3_TX register *****************/ +#define USB_ADDR3_TX_ADDR3_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 3 */ + +/***************** Bit definition for USB_ADDR4_TX register *****************/ +#define USB_ADDR4_TX_ADDR4_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 4 */ + +/***************** Bit definition for USB_ADDR5_TX register *****************/ +#define USB_ADDR5_TX_ADDR5_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 5 */ + +/***************** Bit definition for USB_ADDR6_TX register *****************/ +#define USB_ADDR6_TX_ADDR6_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 6 */ + +/***************** Bit definition for USB_ADDR7_TX register *****************/ +#define USB_ADDR7_TX_ADDR7_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 7 */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_COUNT0_TX register ****************/ +#define USB_COUNT0_TX_COUNT0_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 0 */ + +/***************** Bit definition for USB_COUNT1_TX register ****************/ +#define USB_COUNT1_TX_COUNT1_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 1 */ + +/***************** Bit definition for USB_COUNT2_TX register ****************/ +#define USB_COUNT2_TX_COUNT2_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 2 */ + +/***************** Bit definition for USB_COUNT3_TX register ****************/ +#define USB_COUNT3_TX_COUNT3_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 3 */ + +/***************** Bit definition for USB_COUNT4_TX register ****************/ +#define USB_COUNT4_TX_COUNT4_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 4 */ + +/***************** Bit definition for USB_COUNT5_TX register ****************/ +#define USB_COUNT5_TX_COUNT5_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 5 */ + +/***************** Bit definition for USB_COUNT6_TX register ****************/ +#define USB_COUNT6_TX_COUNT6_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 6 */ + +/***************** Bit definition for USB_COUNT7_TX register ****************/ +#define USB_COUNT7_TX_COUNT7_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 7 */ + +/*----------------------------------------------------------------------------*/ + +/**************** Bit definition for USB_COUNT0_TX_0 register ***************/ +#define USB_COUNT0_TX_0_COUNT0_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 (low) */ + +/**************** Bit definition for USB_COUNT0_TX_1 register ***************/ +#define USB_COUNT0_TX_1_COUNT0_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 0 (high) */ + +/**************** Bit definition for USB_COUNT1_TX_0 register ***************/ +#define USB_COUNT1_TX_0_COUNT1_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 (low) */ + +/**************** Bit definition for USB_COUNT1_TX_1 register ***************/ +#define USB_COUNT1_TX_1_COUNT1_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 1 (high) */ + +/**************** Bit definition for USB_COUNT2_TX_0 register ***************/ +#define USB_COUNT2_TX_0_COUNT2_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 (low) */ + +/**************** Bit definition for USB_COUNT2_TX_1 register ***************/ +#define USB_COUNT2_TX_1_COUNT2_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 2 (high) */ + +/**************** Bit definition for USB_COUNT3_TX_0 register ***************/ +#define USB_COUNT3_TX_0_COUNT3_TX_0 ((uint16_t)0x000003FF) /*!< Transmission Byte Count 3 (low) */ + +/**************** Bit definition for USB_COUNT3_TX_1 register ***************/ +#define USB_COUNT3_TX_1_COUNT3_TX_1 ((uint16_t)0x03FF0000) /*!< Transmission Byte Count 3 (high) */ + +/**************** Bit definition for USB_COUNT4_TX_0 register ***************/ +#define USB_COUNT4_TX_0_COUNT4_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 (low) */ + +/**************** Bit definition for USB_COUNT4_TX_1 register ***************/ +#define USB_COUNT4_TX_1_COUNT4_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 4 (high) */ + +/**************** Bit definition for USB_COUNT5_TX_0 register ***************/ +#define USB_COUNT5_TX_0_COUNT5_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 (low) */ + +/**************** Bit definition for USB_COUNT5_TX_1 register ***************/ +#define USB_COUNT5_TX_1_COUNT5_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 5 (high) */ + +/**************** Bit definition for USB_COUNT6_TX_0 register ***************/ +#define USB_COUNT6_TX_0_COUNT6_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 (low) */ + +/**************** Bit definition for USB_COUNT6_TX_1 register ***************/ +#define USB_COUNT6_TX_1_COUNT6_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 6 (high) */ + +/**************** Bit definition for USB_COUNT7_TX_0 register ***************/ +#define USB_COUNT7_TX_0_COUNT7_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 (low) */ + +/**************** Bit definition for USB_COUNT7_TX_1 register ***************/ +#define USB_COUNT7_TX_1_COUNT7_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 7 (high) */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_ADDR0_RX register *****************/ +#define USB_ADDR0_RX_ADDR0_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 0 */ + +/***************** Bit definition for USB_ADDR1_RX register *****************/ +#define USB_ADDR1_RX_ADDR1_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 1 */ + +/***************** Bit definition for USB_ADDR2_RX register *****************/ +#define USB_ADDR2_RX_ADDR2_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 2 */ + +/***************** Bit definition for USB_ADDR3_RX register *****************/ +#define USB_ADDR3_RX_ADDR3_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 3 */ + +/***************** Bit definition for USB_ADDR4_RX register *****************/ +#define USB_ADDR4_RX_ADDR4_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 4 */ + +/***************** Bit definition for USB_ADDR5_RX register *****************/ +#define USB_ADDR5_RX_ADDR5_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 5 */ + +/***************** Bit definition for USB_ADDR6_RX register *****************/ +#define USB_ADDR6_RX_ADDR6_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 6 */ + +/***************** Bit definition for USB_ADDR7_RX register *****************/ +#define USB_ADDR7_RX_ADDR7_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 7 */ + +/*----------------------------------------------------------------------------*/ + +/***************** Bit definition for USB_COUNT0_RX register ****************/ +#define USB_COUNT0_RX_COUNT0_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT0_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT0_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT0_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT0_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT0_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT0_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT1_RX register ****************/ +#define USB_COUNT1_RX_COUNT1_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT1_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT1_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT1_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT1_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT1_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT1_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT2_RX register ****************/ +#define USB_COUNT2_RX_COUNT2_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT2_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT2_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT2_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT2_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT2_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT2_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT3_RX register ****************/ +#define USB_COUNT3_RX_COUNT3_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT3_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT3_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT3_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT3_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT3_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT3_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT4_RX register ****************/ +#define USB_COUNT4_RX_COUNT4_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT4_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT4_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT4_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT4_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT4_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT4_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT5_RX register ****************/ +#define USB_COUNT5_RX_COUNT5_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT5_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT5_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT5_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT5_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT5_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT5_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT6_RX register ****************/ +#define USB_COUNT6_RX_COUNT6_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT6_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT6_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT6_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT6_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT6_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT6_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/***************** Bit definition for USB_COUNT7_RX register ****************/ +#define USB_COUNT7_RX_COUNT7_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */ + +#define USB_COUNT7_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ +#define USB_COUNT7_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define USB_COUNT7_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */ +#define USB_COUNT7_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */ +#define USB_COUNT7_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */ +#define USB_COUNT7_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */ + +/*----------------------------------------------------------------------------*/ + +/**************** Bit definition for USB_COUNT0_RX_0 register ***************/ +#define USB_COUNT0_RX_0_COUNT0_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT0_RX_1 register ***************/ +#define USB_COUNT0_RX_1_COUNT0_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 1 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT0_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT1_RX_0 register ***************/ +#define USB_COUNT1_RX_0_COUNT1_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT1_RX_1 register ***************/ +#define USB_COUNT1_RX_1_COUNT1_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT1_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT2_RX_0 register ***************/ +#define USB_COUNT2_RX_0_COUNT2_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT2_RX_1 register ***************/ +#define USB_COUNT2_RX_1_COUNT2_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT2_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT3_RX_0 register ***************/ +#define USB_COUNT3_RX_0_COUNT3_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT3_RX_1 register ***************/ +#define USB_COUNT3_RX_1_COUNT3_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT3_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT4_RX_0 register ***************/ +#define USB_COUNT4_RX_0_COUNT4_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT4_RX_1 register ***************/ +#define USB_COUNT4_RX_1_COUNT4_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT4_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/**************** Bit definition for USB_COUNT5_RX_0 register ***************/ +#define USB_COUNT5_RX_0_COUNT5_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT5_RX_1 register ***************/ +#define USB_COUNT5_RX_1_COUNT5_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT5_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/*************** Bit definition for USB_COUNT6_RX_0 register ***************/ +#define USB_COUNT6_RX_0_COUNT6_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/**************** Bit definition for USB_COUNT6_RX_1 register ***************/ +#define USB_COUNT6_RX_1_COUNT6_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT6_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/*************** Bit definition for USB_COUNT7_RX_0 register ****************/ +#define USB_COUNT7_RX_0_COUNT7_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ + +#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ +#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ + +/*************** Bit definition for USB_COUNT7_RX_1 register ****************/ +#define USB_COUNT7_RX_1_COUNT7_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ + +#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ +#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ + +#define USB_COUNT7_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ + +/******************************************************************************/ +/* */ +/* Controller Area Network */ +/* */ +/******************************************************************************/ + +/*!< CAN control and status registers */ +/******************* Bit definition for CAN_MCR register ********************/ +#define CAN_MCR_INRQ ((uint16_t)0x0001) /*!< Initialization Request */ +#define CAN_MCR_SLEEP ((uint16_t)0x0002) /*!< Sleep Mode Request */ +#define CAN_MCR_TXFP ((uint16_t)0x0004) /*!< Transmit FIFO Priority */ +#define CAN_MCR_RFLM ((uint16_t)0x0008) /*!< Receive FIFO Locked Mode */ +#define CAN_MCR_NART ((uint16_t)0x0010) /*!< No Automatic Retransmission */ +#define CAN_MCR_AWUM ((uint16_t)0x0020) /*!< Automatic Wakeup Mode */ +#define CAN_MCR_ABOM ((uint16_t)0x0040) /*!< Automatic Bus-Off Management */ +#define CAN_MCR_TTCM ((uint16_t)0x0080) /*!< Time Triggered Communication Mode */ +#define CAN_MCR_RESET ((uint16_t)0x8000) /*!< CAN software master reset */ + +/******************* Bit definition for CAN_MSR register ********************/ +#define CAN_MSR_INAK ((uint16_t)0x0001) /*!< Initialization Acknowledge */ +#define CAN_MSR_SLAK ((uint16_t)0x0002) /*!< Sleep Acknowledge */ +#define CAN_MSR_ERRI ((uint16_t)0x0004) /*!< Error Interrupt */ +#define CAN_MSR_WKUI ((uint16_t)0x0008) /*!< Wakeup Interrupt */ +#define CAN_MSR_SLAKI ((uint16_t)0x0010) /*!< Sleep Acknowledge Interrupt */ +#define CAN_MSR_TXM ((uint16_t)0x0100) /*!< Transmit Mode */ +#define CAN_MSR_RXM ((uint16_t)0x0200) /*!< Receive Mode */ +#define CAN_MSR_SAMP ((uint16_t)0x0400) /*!< Last Sample Point */ +#define CAN_MSR_RX ((uint16_t)0x0800) /*!< CAN Rx Signal */ + +/******************* Bit definition for CAN_TSR register ********************/ +#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!< Request Completed Mailbox0 */ +#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!< Transmission OK of Mailbox0 */ +#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!< Arbitration Lost for Mailbox0 */ +#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!< Transmission Error of Mailbox0 */ +#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!< Abort Request for Mailbox0 */ +#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!< Request Completed Mailbox1 */ +#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!< Transmission OK of Mailbox1 */ +#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!< Arbitration Lost for Mailbox1 */ +#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!< Transmission Error of Mailbox1 */ +#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!< Abort Request for Mailbox 1 */ +#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!< Request Completed Mailbox2 */ +#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!< Transmission OK of Mailbox 2 */ +#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!< Arbitration Lost for mailbox 2 */ +#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!< Transmission Error of Mailbox 2 */ +#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!< Abort Request for Mailbox 2 */ +#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!< Mailbox Code */ + +#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!< TME[2:0] bits */ +#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!< Transmit Mailbox 0 Empty */ +#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!< Transmit Mailbox 1 Empty */ +#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!< Transmit Mailbox 2 Empty */ + +#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!< LOW[2:0] bits */ +#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!< Lowest Priority Flag for Mailbox 0 */ +#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!< Lowest Priority Flag for Mailbox 1 */ +#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!< Lowest Priority Flag for Mailbox 2 */ + +/******************* Bit definition for CAN_RF0R register *******************/ +#define CAN_RF0R_FMP0 ((uint8_t)0x03) /*!< FIFO 0 Message Pending */ +#define CAN_RF0R_FULL0 ((uint8_t)0x08) /*!< FIFO 0 Full */ +#define CAN_RF0R_FOVR0 ((uint8_t)0x10) /*!< FIFO 0 Overrun */ +#define CAN_RF0R_RFOM0 ((uint8_t)0x20) /*!< Release FIFO 0 Output Mailbox */ + +/******************* Bit definition for CAN_RF1R register *******************/ +#define CAN_RF1R_FMP1 ((uint8_t)0x03) /*!< FIFO 1 Message Pending */ +#define CAN_RF1R_FULL1 ((uint8_t)0x08) /*!< FIFO 1 Full */ +#define CAN_RF1R_FOVR1 ((uint8_t)0x10) /*!< FIFO 1 Overrun */ +#define CAN_RF1R_RFOM1 ((uint8_t)0x20) /*!< Release FIFO 1 Output Mailbox */ + +/******************** Bit definition for CAN_IER register *******************/ +#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!< Transmit Mailbox Empty Interrupt Enable */ +#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!< FIFO Message Pending Interrupt Enable */ +#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!< FIFO Full Interrupt Enable */ +#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!< FIFO Overrun Interrupt Enable */ +#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!< FIFO Message Pending Interrupt Enable */ +#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!< FIFO Full Interrupt Enable */ +#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!< FIFO Overrun Interrupt Enable */ +#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!< Error Warning Interrupt Enable */ +#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!< Error Passive Interrupt Enable */ +#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!< Bus-Off Interrupt Enable */ +#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!< Last Error Code Interrupt Enable */ +#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!< Error Interrupt Enable */ +#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!< Wakeup Interrupt Enable */ +#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!< Sleep Interrupt Enable */ + +/******************** Bit definition for CAN_ESR register *******************/ +#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!< Error Warning Flag */ +#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!< Error Passive Flag */ +#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!< Bus-Off Flag */ + +#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!< LEC[2:0] bits (Last Error Code) */ +#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + +#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!< Least significant byte of the 9-bit Transmit Error Counter */ +#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!< Receive Error Counter */ + +/******************* Bit definition for CAN_BTR register ********************/ +#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!< Baud Rate Prescaler */ +#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!< Time Segment 1 */ +#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!< Time Segment 2 */ +#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!< Resynchronization Jump Width */ +#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!< Loop Back Mode (Debug) */ +#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!< Silent Mode */ + +/*!< Mailbox registers */ +/****************** Bit definition for CAN_TI0R register ********************/ +#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/****************** Bit definition for CAN_TDT0R register *******************/ +#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/****************** Bit definition for CAN_TDL0R register *******************/ +#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/****************** Bit definition for CAN_TDH0R register *******************/ +#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_TI1R register *******************/ +#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_TDT1R register ******************/ +#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_TDL1R register ******************/ +#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_TDH1R register ******************/ +#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_TI2R register *******************/ +#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */ +#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */ +#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_TDT2R register ******************/ +#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */ +#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_TDL2R register ******************/ +#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_TDH2R register ******************/ +#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_RI0R register *******************/ +#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */ +#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_RDT0R register ******************/ +#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */ +#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_RDL0R register ******************/ +#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_RDH0R register ******************/ +#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/******************* Bit definition for CAN_RI1R register *******************/ +#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */ +#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */ +#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */ +#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */ + +/******************* Bit definition for CAN_RDT1R register ******************/ +#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */ +#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */ +#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */ + +/******************* Bit definition for CAN_RDL1R register ******************/ +#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */ +#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */ +#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */ +#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */ + +/******************* Bit definition for CAN_RDH1R register ******************/ +#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */ +#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */ +#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */ +#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */ + +/*!< CAN filter registers */ +/******************* Bit definition for CAN_FMR register ********************/ +#define CAN_FMR_FINIT ((uint8_t)0x01) /*!< Filter Init Mode */ + +/******************* Bit definition for CAN_FM1R register *******************/ +#define CAN_FM1R_FBM ((uint16_t)0x3FFF) /*!< Filter Mode */ +#define CAN_FM1R_FBM0 ((uint16_t)0x0001) /*!< Filter Init Mode bit 0 */ +#define CAN_FM1R_FBM1 ((uint16_t)0x0002) /*!< Filter Init Mode bit 1 */ +#define CAN_FM1R_FBM2 ((uint16_t)0x0004) /*!< Filter Init Mode bit 2 */ +#define CAN_FM1R_FBM3 ((uint16_t)0x0008) /*!< Filter Init Mode bit 3 */ +#define CAN_FM1R_FBM4 ((uint16_t)0x0010) /*!< Filter Init Mode bit 4 */ +#define CAN_FM1R_FBM5 ((uint16_t)0x0020) /*!< Filter Init Mode bit 5 */ +#define CAN_FM1R_FBM6 ((uint16_t)0x0040) /*!< Filter Init Mode bit 6 */ +#define CAN_FM1R_FBM7 ((uint16_t)0x0080) /*!< Filter Init Mode bit 7 */ +#define CAN_FM1R_FBM8 ((uint16_t)0x0100) /*!< Filter Init Mode bit 8 */ +#define CAN_FM1R_FBM9 ((uint16_t)0x0200) /*!< Filter Init Mode bit 9 */ +#define CAN_FM1R_FBM10 ((uint16_t)0x0400) /*!< Filter Init Mode bit 10 */ +#define CAN_FM1R_FBM11 ((uint16_t)0x0800) /*!< Filter Init Mode bit 11 */ +#define CAN_FM1R_FBM12 ((uint16_t)0x1000) /*!< Filter Init Mode bit 12 */ +#define CAN_FM1R_FBM13 ((uint16_t)0x2000) /*!< Filter Init Mode bit 13 */ + +/******************* Bit definition for CAN_FS1R register *******************/ +#define CAN_FS1R_FSC ((uint16_t)0x3FFF) /*!< Filter Scale Configuration */ +#define CAN_FS1R_FSC0 ((uint16_t)0x0001) /*!< Filter Scale Configuration bit 0 */ +#define CAN_FS1R_FSC1 ((uint16_t)0x0002) /*!< Filter Scale Configuration bit 1 */ +#define CAN_FS1R_FSC2 ((uint16_t)0x0004) /*!< Filter Scale Configuration bit 2 */ +#define CAN_FS1R_FSC3 ((uint16_t)0x0008) /*!< Filter Scale Configuration bit 3 */ +#define CAN_FS1R_FSC4 ((uint16_t)0x0010) /*!< Filter Scale Configuration bit 4 */ +#define CAN_FS1R_FSC5 ((uint16_t)0x0020) /*!< Filter Scale Configuration bit 5 */ +#define CAN_FS1R_FSC6 ((uint16_t)0x0040) /*!< Filter Scale Configuration bit 6 */ +#define CAN_FS1R_FSC7 ((uint16_t)0x0080) /*!< Filter Scale Configuration bit 7 */ +#define CAN_FS1R_FSC8 ((uint16_t)0x0100) /*!< Filter Scale Configuration bit 8 */ +#define CAN_FS1R_FSC9 ((uint16_t)0x0200) /*!< Filter Scale Configuration bit 9 */ +#define CAN_FS1R_FSC10 ((uint16_t)0x0400) /*!< Filter Scale Configuration bit 10 */ +#define CAN_FS1R_FSC11 ((uint16_t)0x0800) /*!< Filter Scale Configuration bit 11 */ +#define CAN_FS1R_FSC12 ((uint16_t)0x1000) /*!< Filter Scale Configuration bit 12 */ +#define CAN_FS1R_FSC13 ((uint16_t)0x2000) /*!< Filter Scale Configuration bit 13 */ + +/****************** Bit definition for CAN_FFA1R register *******************/ +#define CAN_FFA1R_FFA ((uint16_t)0x3FFF) /*!< Filter FIFO Assignment */ +#define CAN_FFA1R_FFA0 ((uint16_t)0x0001) /*!< Filter FIFO Assignment for Filter 0 */ +#define CAN_FFA1R_FFA1 ((uint16_t)0x0002) /*!< Filter FIFO Assignment for Filter 1 */ +#define CAN_FFA1R_FFA2 ((uint16_t)0x0004) /*!< Filter FIFO Assignment for Filter 2 */ +#define CAN_FFA1R_FFA3 ((uint16_t)0x0008) /*!< Filter FIFO Assignment for Filter 3 */ +#define CAN_FFA1R_FFA4 ((uint16_t)0x0010) /*!< Filter FIFO Assignment for Filter 4 */ +#define CAN_FFA1R_FFA5 ((uint16_t)0x0020) /*!< Filter FIFO Assignment for Filter 5 */ +#define CAN_FFA1R_FFA6 ((uint16_t)0x0040) /*!< Filter FIFO Assignment for Filter 6 */ +#define CAN_FFA1R_FFA7 ((uint16_t)0x0080) /*!< Filter FIFO Assignment for Filter 7 */ +#define CAN_FFA1R_FFA8 ((uint16_t)0x0100) /*!< Filter FIFO Assignment for Filter 8 */ +#define CAN_FFA1R_FFA9 ((uint16_t)0x0200) /*!< Filter FIFO Assignment for Filter 9 */ +#define CAN_FFA1R_FFA10 ((uint16_t)0x0400) /*!< Filter FIFO Assignment for Filter 10 */ +#define CAN_FFA1R_FFA11 ((uint16_t)0x0800) /*!< Filter FIFO Assignment for Filter 11 */ +#define CAN_FFA1R_FFA12 ((uint16_t)0x1000) /*!< Filter FIFO Assignment for Filter 12 */ +#define CAN_FFA1R_FFA13 ((uint16_t)0x2000) /*!< Filter FIFO Assignment for Filter 13 */ + +/******************* Bit definition for CAN_FA1R register *******************/ +#define CAN_FA1R_FACT ((uint16_t)0x3FFF) /*!< Filter Active */ +#define CAN_FA1R_FACT0 ((uint16_t)0x0001) /*!< Filter 0 Active */ +#define CAN_FA1R_FACT1 ((uint16_t)0x0002) /*!< Filter 1 Active */ +#define CAN_FA1R_FACT2 ((uint16_t)0x0004) /*!< Filter 2 Active */ +#define CAN_FA1R_FACT3 ((uint16_t)0x0008) /*!< Filter 3 Active */ +#define CAN_FA1R_FACT4 ((uint16_t)0x0010) /*!< Filter 4 Active */ +#define CAN_FA1R_FACT5 ((uint16_t)0x0020) /*!< Filter 5 Active */ +#define CAN_FA1R_FACT6 ((uint16_t)0x0040) /*!< Filter 6 Active */ +#define CAN_FA1R_FACT7 ((uint16_t)0x0080) /*!< Filter 7 Active */ +#define CAN_FA1R_FACT8 ((uint16_t)0x0100) /*!< Filter 8 Active */ +#define CAN_FA1R_FACT9 ((uint16_t)0x0200) /*!< Filter 9 Active */ +#define CAN_FA1R_FACT10 ((uint16_t)0x0400) /*!< Filter 10 Active */ +#define CAN_FA1R_FACT11 ((uint16_t)0x0800) /*!< Filter 11 Active */ +#define CAN_FA1R_FACT12 ((uint16_t)0x1000) /*!< Filter 12 Active */ +#define CAN_FA1R_FACT13 ((uint16_t)0x2000) /*!< Filter 13 Active */ + +/******************* Bit definition for CAN_F0R1 register *******************/ +#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F1R1 register *******************/ +#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F2R1 register *******************/ +#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F3R1 register *******************/ +#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F4R1 register *******************/ +#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F5R1 register *******************/ +#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F6R1 register *******************/ +#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F7R1 register *******************/ +#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F8R1 register *******************/ +#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F9R1 register *******************/ +#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F10R1 register ******************/ +#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F11R1 register ******************/ +#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F12R1 register ******************/ +#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F13R1 register ******************/ +#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F0R2 register *******************/ +#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F1R2 register *******************/ +#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F2R2 register *******************/ +#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F3R2 register *******************/ +#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F4R2 register *******************/ +#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F5R2 register *******************/ +#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F6R2 register *******************/ +#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F7R2 register *******************/ +#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F8R2 register *******************/ +#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F9R2 register *******************/ +#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F10R2 register ******************/ +#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F11R2 register ******************/ +#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F12R2 register ******************/ +#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************* Bit definition for CAN_F13R2 register ******************/ +#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */ +#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */ +#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */ +#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */ +#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */ +#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */ +#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */ +#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */ +#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */ +#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */ +#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */ +#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */ +#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */ +#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */ +#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */ +#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */ +#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */ +#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */ +#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */ +#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */ +#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */ +#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */ +#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */ +#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */ +#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */ +#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */ +#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */ +#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */ +#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */ +#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */ +#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */ +#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */ + +/******************************************************************************/ +/* */ +/* Serial Peripheral Interface */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for SPI_CR1 register ********************/ +#define SPI_CR1_CPHA ((uint16_t)0x0001) /*!< Clock Phase */ +#define SPI_CR1_CPOL ((uint16_t)0x0002) /*!< Clock Polarity */ +#define SPI_CR1_MSTR ((uint16_t)0x0004) /*!< Master Selection */ + +#define SPI_CR1_BR ((uint16_t)0x0038) /*!< BR[2:0] bits (Baud Rate Control) */ +#define SPI_CR1_BR_0 ((uint16_t)0x0008) /*!< Bit 0 */ +#define SPI_CR1_BR_1 ((uint16_t)0x0010) /*!< Bit 1 */ +#define SPI_CR1_BR_2 ((uint16_t)0x0020) /*!< Bit 2 */ + +#define SPI_CR1_SPE ((uint16_t)0x0040) /*!< SPI Enable */ +#define SPI_CR1_LSBFIRST ((uint16_t)0x0080) /*!< Frame Format */ +#define SPI_CR1_SSI ((uint16_t)0x0100) /*!< Internal slave select */ +#define SPI_CR1_SSM ((uint16_t)0x0200) /*!< Software slave management */ +#define SPI_CR1_RXONLY ((uint16_t)0x0400) /*!< Receive only */ +#define SPI_CR1_DFF ((uint16_t)0x0800) /*!< Data Frame Format */ +#define SPI_CR1_CRCNEXT ((uint16_t)0x1000) /*!< Transmit CRC next */ +#define SPI_CR1_CRCEN ((uint16_t)0x2000) /*!< Hardware CRC calculation enable */ +#define SPI_CR1_BIDIOE ((uint16_t)0x4000) /*!< Output enable in bidirectional mode */ +#define SPI_CR1_BIDIMODE ((uint16_t)0x8000) /*!< Bidirectional data mode enable */ + +/******************* Bit definition for SPI_CR2 register ********************/ +#define SPI_CR2_RXDMAEN ((uint8_t)0x01) /*!< Rx Buffer DMA Enable */ +#define SPI_CR2_TXDMAEN ((uint8_t)0x02) /*!< Tx Buffer DMA Enable */ +#define SPI_CR2_SSOE ((uint8_t)0x04) /*!< SS Output Enable */ +#define SPI_CR2_ERRIE ((uint8_t)0x20) /*!< Error Interrupt Enable */ +#define SPI_CR2_RXNEIE ((uint8_t)0x40) /*!< RX buffer Not Empty Interrupt Enable */ +#define SPI_CR2_TXEIE ((uint8_t)0x80) /*!< Tx buffer Empty Interrupt Enable */ + +/******************** Bit definition for SPI_SR register ********************/ +#define SPI_SR_RXNE ((uint8_t)0x01) /*!< Receive buffer Not Empty */ +#define SPI_SR_TXE ((uint8_t)0x02) /*!< Transmit buffer Empty */ +#define SPI_SR_CHSIDE ((uint8_t)0x04) /*!< Channel side */ +#define SPI_SR_UDR ((uint8_t)0x08) /*!< Underrun flag */ +#define SPI_SR_CRCERR ((uint8_t)0x10) /*!< CRC Error flag */ +#define SPI_SR_MODF ((uint8_t)0x20) /*!< Mode fault */ +#define SPI_SR_OVR ((uint8_t)0x40) /*!< Overrun flag */ +#define SPI_SR_BSY ((uint8_t)0x80) /*!< Busy flag */ + +/******************** Bit definition for SPI_DR register ********************/ +#define SPI_DR_DR ((uint16_t)0xFFFF) /*!< Data Register */ + +/******************* Bit definition for SPI_CRCPR register ******************/ +#define SPI_CRCPR_CRCPOLY ((uint16_t)0xFFFF) /*!< CRC polynomial register */ + +/****************** Bit definition for SPI_RXCRCR register ******************/ +#define SPI_RXCRCR_RXCRC ((uint16_t)0xFFFF) /*!< Rx CRC Register */ + +/****************** Bit definition for SPI_TXCRCR register ******************/ +#define SPI_TXCRCR_TXCRC ((uint16_t)0xFFFF) /*!< Tx CRC Register */ + +/****************** Bit definition for SPI_I2SCFGR register *****************/ +#define SPI_I2SCFGR_CHLEN ((uint16_t)0x0001) /*!< Channel length (number of bits per audio channel) */ + +#define SPI_I2SCFGR_DATLEN ((uint16_t)0x0006) /*!< DATLEN[1:0] bits (Data length to be transferred) */ +#define SPI_I2SCFGR_DATLEN_0 ((uint16_t)0x0002) /*!< Bit 0 */ +#define SPI_I2SCFGR_DATLEN_1 ((uint16_t)0x0004) /*!< Bit 1 */ + +#define SPI_I2SCFGR_CKPOL ((uint16_t)0x0008) /*!< steady state clock polarity */ + +#define SPI_I2SCFGR_I2SSTD ((uint16_t)0x0030) /*!< I2SSTD[1:0] bits (I2S standard selection) */ +#define SPI_I2SCFGR_I2SSTD_0 ((uint16_t)0x0010) /*!< Bit 0 */ +#define SPI_I2SCFGR_I2SSTD_1 ((uint16_t)0x0020) /*!< Bit 1 */ + +#define SPI_I2SCFGR_PCMSYNC ((uint16_t)0x0080) /*!< PCM frame synchronization */ + +#define SPI_I2SCFGR_I2SCFG ((uint16_t)0x0300) /*!< I2SCFG[1:0] bits (I2S configuration mode) */ +#define SPI_I2SCFGR_I2SCFG_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define SPI_I2SCFGR_I2SCFG_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define SPI_I2SCFGR_I2SE ((uint16_t)0x0400) /*!< I2S Enable */ +#define SPI_I2SCFGR_I2SMOD ((uint16_t)0x0800) /*!< I2S mode selection */ + +/****************** Bit definition for SPI_I2SPR register *******************/ +#define SPI_I2SPR_I2SDIV ((uint16_t)0x00FF) /*!< I2S Linear prescaler */ +#define SPI_I2SPR_ODD ((uint16_t)0x0100) /*!< Odd factor for the prescaler */ +#define SPI_I2SPR_MCKOE ((uint16_t)0x0200) /*!< Master Clock Output Enable */ + +/******************************************************************************/ +/* */ +/* Inter-integrated Circuit Interface */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for I2C_CR1 register ********************/ +#define I2C_CR1_PE ((uint16_t)0x0001) /*!< Peripheral Enable */ +#define I2C_CR1_SMBUS ((uint16_t)0x0002) /*!< SMBus Mode */ +#define I2C_CR1_SMBTYPE ((uint16_t)0x0008) /*!< SMBus Type */ +#define I2C_CR1_ENARP ((uint16_t)0x0010) /*!< ARP Enable */ +#define I2C_CR1_ENPEC ((uint16_t)0x0020) /*!< PEC Enable */ +#define I2C_CR1_ENGC ((uint16_t)0x0040) /*!< General Call Enable */ +#define I2C_CR1_NOSTRETCH ((uint16_t)0x0080) /*!< Clock Stretching Disable (Slave mode) */ +#define I2C_CR1_START ((uint16_t)0x0100) /*!< Start Generation */ +#define I2C_CR1_STOP ((uint16_t)0x0200) /*!< Stop Generation */ +#define I2C_CR1_ACK ((uint16_t)0x0400) /*!< Acknowledge Enable */ +#define I2C_CR1_POS ((uint16_t)0x0800) /*!< Acknowledge/PEC Position (for data reception) */ +#define I2C_CR1_PEC ((uint16_t)0x1000) /*!< Packet Error Checking */ +#define I2C_CR1_ALERT ((uint16_t)0x2000) /*!< SMBus Alert */ +#define I2C_CR1_SWRST ((uint16_t)0x8000) /*!< Software Reset */ + +/******************* Bit definition for I2C_CR2 register ********************/ +#define I2C_CR2_FREQ ((uint16_t)0x003F) /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */ +#define I2C_CR2_FREQ_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define I2C_CR2_FREQ_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define I2C_CR2_FREQ_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define I2C_CR2_FREQ_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define I2C_CR2_FREQ_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define I2C_CR2_FREQ_5 ((uint16_t)0x0020) /*!< Bit 5 */ + +#define I2C_CR2_ITERREN ((uint16_t)0x0100) /*!< Error Interrupt Enable */ +#define I2C_CR2_ITEVTEN ((uint16_t)0x0200) /*!< Event Interrupt Enable */ +#define I2C_CR2_ITBUFEN ((uint16_t)0x0400) /*!< Buffer Interrupt Enable */ +#define I2C_CR2_DMAEN ((uint16_t)0x0800) /*!< DMA Requests Enable */ +#define I2C_CR2_LAST ((uint16_t)0x1000) /*!< DMA Last Transfer */ + +/******************* Bit definition for I2C_OAR1 register *******************/ +#define I2C_OAR1_ADD1_7 ((uint16_t)0x00FE) /*!< Interface Address */ +#define I2C_OAR1_ADD8_9 ((uint16_t)0x0300) /*!< Interface Address */ + +#define I2C_OAR1_ADD0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define I2C_OAR1_ADD1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define I2C_OAR1_ADD2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define I2C_OAR1_ADD3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define I2C_OAR1_ADD4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define I2C_OAR1_ADD5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define I2C_OAR1_ADD6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define I2C_OAR1_ADD7 ((uint16_t)0x0080) /*!< Bit 7 */ +#define I2C_OAR1_ADD8 ((uint16_t)0x0100) /*!< Bit 8 */ +#define I2C_OAR1_ADD9 ((uint16_t)0x0200) /*!< Bit 9 */ + +#define I2C_OAR1_ADDMODE ((uint16_t)0x8000) /*!< Addressing Mode (Slave mode) */ + +/******************* Bit definition for I2C_OAR2 register *******************/ +#define I2C_OAR2_ENDUAL ((uint8_t)0x01) /*!< Dual addressing mode enable */ +#define I2C_OAR2_ADD2 ((uint8_t)0xFE) /*!< Interface address */ + +/******************** Bit definition for I2C_DR register ********************/ +#define I2C_DR_DR ((uint8_t)0xFF) /*!< 8-bit Data Register */ + +/******************* Bit definition for I2C_SR1 register ********************/ +#define I2C_SR1_SB ((uint16_t)0x0001) /*!< Start Bit (Master mode) */ +#define I2C_SR1_ADDR ((uint16_t)0x0002) /*!< Address sent (master mode)/matched (slave mode) */ +#define I2C_SR1_BTF ((uint16_t)0x0004) /*!< Byte Transfer Finished */ +#define I2C_SR1_ADD10 ((uint16_t)0x0008) /*!< 10-bit header sent (Master mode) */ +#define I2C_SR1_STOPF ((uint16_t)0x0010) /*!< Stop detection (Slave mode) */ +#define I2C_SR1_RXNE ((uint16_t)0x0040) /*!< Data Register not Empty (receivers) */ +#define I2C_SR1_TXE ((uint16_t)0x0080) /*!< Data Register Empty (transmitters) */ +#define I2C_SR1_BERR ((uint16_t)0x0100) /*!< Bus Error */ +#define I2C_SR1_ARLO ((uint16_t)0x0200) /*!< Arbitration Lost (master mode) */ +#define I2C_SR1_AF ((uint16_t)0x0400) /*!< Acknowledge Failure */ +#define I2C_SR1_OVR ((uint16_t)0x0800) /*!< Overrun/Underrun */ +#define I2C_SR1_PECERR ((uint16_t)0x1000) /*!< PEC Error in reception */ +#define I2C_SR1_TIMEOUT ((uint16_t)0x4000) /*!< Timeout or Tlow Error */ +#define I2C_SR1_SMBALERT ((uint16_t)0x8000) /*!< SMBus Alert */ + +/******************* Bit definition for I2C_SR2 register ********************/ +#define I2C_SR2_MSL ((uint16_t)0x0001) /*!< Master/Slave */ +#define I2C_SR2_BUSY ((uint16_t)0x0002) /*!< Bus Busy */ +#define I2C_SR2_TRA ((uint16_t)0x0004) /*!< Transmitter/Receiver */ +#define I2C_SR2_GENCALL ((uint16_t)0x0010) /*!< General Call Address (Slave mode) */ +#define I2C_SR2_SMBDEFAULT ((uint16_t)0x0020) /*!< SMBus Device Default Address (Slave mode) */ +#define I2C_SR2_SMBHOST ((uint16_t)0x0040) /*!< SMBus Host Header (Slave mode) */ +#define I2C_SR2_DUALF ((uint16_t)0x0080) /*!< Dual Flag (Slave mode) */ +#define I2C_SR2_PEC ((uint16_t)0xFF00) /*!< Packet Error Checking Register */ + +/******************* Bit definition for I2C_CCR register ********************/ +#define I2C_CCR_CCR ((uint16_t)0x0FFF) /*!< Clock Control Register in Fast/Standard mode (Master mode) */ +#define I2C_CCR_DUTY ((uint16_t)0x4000) /*!< Fast Mode Duty Cycle */ +#define I2C_CCR_FS ((uint16_t)0x8000) /*!< I2C Master Mode Selection */ + +/****************** Bit definition for I2C_TRISE register *******************/ +#define I2C_TRISE_TRISE ((uint8_t)0x3F) /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */ + +/******************************************************************************/ +/* */ +/* Universal Synchronous Asynchronous Receiver Transmitter */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for USART_SR register *******************/ +#define USART_SR_PE ((uint16_t)0x0001) /*!< Parity Error */ +#define USART_SR_FE ((uint16_t)0x0002) /*!< Framing Error */ +#define USART_SR_NE ((uint16_t)0x0004) /*!< Noise Error Flag */ +#define USART_SR_ORE ((uint16_t)0x0008) /*!< OverRun Error */ +#define USART_SR_IDLE ((uint16_t)0x0010) /*!< IDLE line detected */ +#define USART_SR_RXNE ((uint16_t)0x0020) /*!< Read Data Register Not Empty */ +#define USART_SR_TC ((uint16_t)0x0040) /*!< Transmission Complete */ +#define USART_SR_TXE ((uint16_t)0x0080) /*!< Transmit Data Register Empty */ +#define USART_SR_LBD ((uint16_t)0x0100) /*!< LIN Break Detection Flag */ +#define USART_SR_CTS ((uint16_t)0x0200) /*!< CTS Flag */ + +/******************* Bit definition for USART_DR register *******************/ +#define USART_DR_DR ((uint16_t)0x01FF) /*!< Data value */ + +/****************** Bit definition for USART_BRR register *******************/ +#define USART_BRR_DIV_Fraction ((uint16_t)0x000F) /*!< Fraction of USARTDIV */ +#define USART_BRR_DIV_Mantissa ((uint16_t)0xFFF0) /*!< Mantissa of USARTDIV */ + +/****************** Bit definition for USART_CR1 register *******************/ +#define USART_CR1_SBK ((uint16_t)0x0001) /*!< Send Break */ +#define USART_CR1_RWU ((uint16_t)0x0002) /*!< Receiver wakeup */ +#define USART_CR1_RE ((uint16_t)0x0004) /*!< Receiver Enable */ +#define USART_CR1_TE ((uint16_t)0x0008) /*!< Transmitter Enable */ +#define USART_CR1_IDLEIE ((uint16_t)0x0010) /*!< IDLE Interrupt Enable */ +#define USART_CR1_RXNEIE ((uint16_t)0x0020) /*!< RXNE Interrupt Enable */ +#define USART_CR1_TCIE ((uint16_t)0x0040) /*!< Transmission Complete Interrupt Enable */ +#define USART_CR1_TXEIE ((uint16_t)0x0080) /*!< PE Interrupt Enable */ +#define USART_CR1_PEIE ((uint16_t)0x0100) /*!< PE Interrupt Enable */ +#define USART_CR1_PS ((uint16_t)0x0200) /*!< Parity Selection */ +#define USART_CR1_PCE ((uint16_t)0x0400) /*!< Parity Control Enable */ +#define USART_CR1_WAKE ((uint16_t)0x0800) /*!< Wakeup method */ +#define USART_CR1_M ((uint16_t)0x1000) /*!< Word length */ +#define USART_CR1_UE ((uint16_t)0x2000) /*!< USART Enable */ +#define USART_CR1_OVER8 ((uint16_t)0x8000) /*!< USART Oversmapling 8-bits */ + +/****************** Bit definition for USART_CR2 register *******************/ +#define USART_CR2_ADD ((uint16_t)0x000F) /*!< Address of the USART node */ +#define USART_CR2_LBDL ((uint16_t)0x0020) /*!< LIN Break Detection Length */ +#define USART_CR2_LBDIE ((uint16_t)0x0040) /*!< LIN Break Detection Interrupt Enable */ +#define USART_CR2_LBCL ((uint16_t)0x0100) /*!< Last Bit Clock pulse */ +#define USART_CR2_CPHA ((uint16_t)0x0200) /*!< Clock Phase */ +#define USART_CR2_CPOL ((uint16_t)0x0400) /*!< Clock Polarity */ +#define USART_CR2_CLKEN ((uint16_t)0x0800) /*!< Clock Enable */ + +#define USART_CR2_STOP ((uint16_t)0x3000) /*!< STOP[1:0] bits (STOP bits) */ +#define USART_CR2_STOP_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define USART_CR2_STOP_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define USART_CR2_LINEN ((uint16_t)0x4000) /*!< LIN mode enable */ + +/****************** Bit definition for USART_CR3 register *******************/ +#define USART_CR3_EIE ((uint16_t)0x0001) /*!< Error Interrupt Enable */ +#define USART_CR3_IREN ((uint16_t)0x0002) /*!< IrDA mode Enable */ +#define USART_CR3_IRLP ((uint16_t)0x0004) /*!< IrDA Low-Power */ +#define USART_CR3_HDSEL ((uint16_t)0x0008) /*!< Half-Duplex Selection */ +#define USART_CR3_NACK ((uint16_t)0x0010) /*!< Smartcard NACK enable */ +#define USART_CR3_SCEN ((uint16_t)0x0020) /*!< Smartcard mode enable */ +#define USART_CR3_DMAR ((uint16_t)0x0040) /*!< DMA Enable Receiver */ +#define USART_CR3_DMAT ((uint16_t)0x0080) /*!< DMA Enable Transmitter */ +#define USART_CR3_RTSE ((uint16_t)0x0100) /*!< RTS Enable */ +#define USART_CR3_CTSE ((uint16_t)0x0200) /*!< CTS Enable */ +#define USART_CR3_CTSIE ((uint16_t)0x0400) /*!< CTS Interrupt Enable */ +#define USART_CR3_ONEBIT ((uint16_t)0x0800) /*!< One Bit method */ + +/****************** Bit definition for USART_GTPR register ******************/ +#define USART_GTPR_PSC ((uint16_t)0x00FF) /*!< PSC[7:0] bits (Prescaler value) */ +#define USART_GTPR_PSC_0 ((uint16_t)0x0001) /*!< Bit 0 */ +#define USART_GTPR_PSC_1 ((uint16_t)0x0002) /*!< Bit 1 */ +#define USART_GTPR_PSC_2 ((uint16_t)0x0004) /*!< Bit 2 */ +#define USART_GTPR_PSC_3 ((uint16_t)0x0008) /*!< Bit 3 */ +#define USART_GTPR_PSC_4 ((uint16_t)0x0010) /*!< Bit 4 */ +#define USART_GTPR_PSC_5 ((uint16_t)0x0020) /*!< Bit 5 */ +#define USART_GTPR_PSC_6 ((uint16_t)0x0040) /*!< Bit 6 */ +#define USART_GTPR_PSC_7 ((uint16_t)0x0080) /*!< Bit 7 */ + +#define USART_GTPR_GT ((uint16_t)0xFF00) /*!< Guard time value */ + +/******************************************************************************/ +/* */ +/* Debug MCU */ +/* */ +/******************************************************************************/ + +/**************** Bit definition for DBGMCU_IDCODE register *****************/ +#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */ + +#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */ +#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */ +#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */ +#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */ +#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */ +#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */ +#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */ +#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */ +#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */ +#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */ +#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */ +#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */ +#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */ +#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */ +#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */ +#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */ + +/****************** Bit definition for DBGMCU_CR register *******************/ +#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001) /*!< Debug Sleep Mode */ +#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */ +#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */ +#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020) /*!< Trace Pin Assignment Control */ + +#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0) /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */ +#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define DBGMCU_CR_DBG_IWDG_STOP ((uint32_t)0x00000100) /*!< Debug Independent Watchdog stopped when Core is halted */ +#define DBGMCU_CR_DBG_WWDG_STOP ((uint32_t)0x00000200) /*!< Debug Window Watchdog stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM1_STOP ((uint32_t)0x00000400) /*!< TIM1 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM2_STOP ((uint32_t)0x00000800) /*!< TIM2 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM3_STOP ((uint32_t)0x00001000) /*!< TIM3 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM4_STOP ((uint32_t)0x00002000) /*!< TIM4 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_CAN1_STOP ((uint32_t)0x00004000) /*!< Debug CAN1 stopped when Core is halted */ +#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000) /*!< SMBUS timeout mode stopped when Core is halted */ +#define DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000) /*!< SMBUS timeout mode stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM8_STOP ((uint32_t)0x00020000) /*!< TIM8 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM5_STOP ((uint32_t)0x00040000) /*!< TIM5 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM6_STOP ((uint32_t)0x00080000) /*!< TIM6 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_TIM7_STOP ((uint32_t)0x00100000) /*!< TIM7 counter stopped when core is halted */ +#define DBGMCU_CR_DBG_CAN2_STOP ((uint32_t)0x00200000) /*!< Debug CAN2 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM15_STOP ((uint32_t)0x00400000) /*!< Debug TIM15 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM16_STOP ((uint32_t)0x00800000) /*!< Debug TIM16 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM17_STOP ((uint32_t)0x01000000) /*!< Debug TIM17 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM12_STOP ((uint32_t)0x02000000) /*!< Debug TIM12 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM13_STOP ((uint32_t)0x04000000) /*!< Debug TIM13 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM14_STOP ((uint32_t)0x08000000) /*!< Debug TIM14 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM9_STOP ((uint32_t)0x10000000) /*!< Debug TIM9 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM10_STOP ((uint32_t)0x20000000) /*!< Debug TIM10 stopped when Core is halted */ +#define DBGMCU_CR_DBG_TIM11_STOP ((uint32_t)0x40000000) /*!< Debug TIM11 stopped when Core is halted */ + +/******************************************************************************/ +/* */ +/* FLASH and Option Bytes Registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for FLASH_ACR register ******************/ +#define FLASH_ACR_LATENCY ((uint8_t)0x03) /*!< LATENCY[2:0] bits (Latency) */ +#define FLASH_ACR_LATENCY_0 ((uint8_t)0x00) /*!< Bit 0 */ +#define FLASH_ACR_LATENCY_1 ((uint8_t)0x01) /*!< Bit 0 */ +#define FLASH_ACR_LATENCY_2 ((uint8_t)0x02) /*!< Bit 1 */ + +#define FLASH_ACR_HLFCYA ((uint8_t)0x08) /*!< Flash Half Cycle Access Enable */ +#define FLASH_ACR_PRFTBE ((uint8_t)0x10) /*!< Prefetch Buffer Enable */ +#define FLASH_ACR_PRFTBS ((uint8_t)0x20) /*!< Prefetch Buffer Status */ + +/****************** Bit definition for FLASH_KEYR register ******************/ +#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */ + +/***************** Bit definition for FLASH_OPTKEYR register ****************/ +#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */ + +/****************** Bit definition for FLASH_SR register *******************/ +#define FLASH_SR_BSY ((uint8_t)0x01) /*!< Busy */ +#define FLASH_SR_PGERR ((uint8_t)0x04) /*!< Programming Error */ +#define FLASH_SR_WRPRTERR ((uint8_t)0x10) /*!< Write Protection Error */ +#define FLASH_SR_EOP ((uint8_t)0x20) /*!< End of operation */ + +/******************* Bit definition for FLASH_CR register *******************/ +#define FLASH_CR_PG ((uint16_t)0x0001) /*!< Programming */ +#define FLASH_CR_PER ((uint16_t)0x0002) /*!< Page Erase */ +#define FLASH_CR_MER ((uint16_t)0x0004) /*!< Mass Erase */ +#define FLASH_CR_OPTPG ((uint16_t)0x0010) /*!< Option Byte Programming */ +#define FLASH_CR_OPTER ((uint16_t)0x0020) /*!< Option Byte Erase */ +#define FLASH_CR_STRT ((uint16_t)0x0040) /*!< Start */ +#define FLASH_CR_LOCK ((uint16_t)0x0080) /*!< Lock */ +#define FLASH_CR_OPTWRE ((uint16_t)0x0200) /*!< Option Bytes Write Enable */ +#define FLASH_CR_ERRIE ((uint16_t)0x0400) /*!< Error Interrupt Enable */ +#define FLASH_CR_EOPIE ((uint16_t)0x1000) /*!< End of operation interrupt enable */ + +/******************* Bit definition for FLASH_AR register *******************/ +#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */ + +/****************** Bit definition for FLASH_OBR register *******************/ +#define FLASH_OBR_OPTERR ((uint16_t)0x0001) /*!< Option Byte Error */ +#define FLASH_OBR_RDPRT ((uint16_t)0x0002) /*!< Read protection */ + +#define FLASH_OBR_USER ((uint16_t)0x03FC) /*!< User Option Bytes */ +#define FLASH_OBR_WDG_SW ((uint16_t)0x0004) /*!< WDG_SW */ +#define FLASH_OBR_nRST_STOP ((uint16_t)0x0008) /*!< nRST_STOP */ +#define FLASH_OBR_nRST_STDBY ((uint16_t)0x0010) /*!< nRST_STDBY */ +#define FLASH_OBR_BFB2 ((uint16_t)0x0020) /*!< BFB2 */ + +/****************** Bit definition for FLASH_WRPR register ******************/ +#define FLASH_WRPR_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for FLASH_RDP register *******************/ +#define FLASH_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */ +#define FLASH_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */ + +/****************** Bit definition for FLASH_USER register ******************/ +#define FLASH_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */ +#define FLASH_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */ + +/****************** Bit definition for FLASH_Data0 register *****************/ +#define FLASH_Data0_Data0 ((uint32_t)0x000000FF) /*!< User data storage option byte */ +#define FLASH_Data0_nData0 ((uint32_t)0x0000FF00) /*!< User data storage complemented option byte */ + +/****************** Bit definition for FLASH_Data1 register *****************/ +#define FLASH_Data1_Data1 ((uint32_t)0x00FF0000) /*!< User data storage option byte */ +#define FLASH_Data1_nData1 ((uint32_t)0xFF000000) /*!< User data storage complemented option byte */ + +/****************** Bit definition for FLASH_WRP0 register ******************/ +#define FLASH_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP1 register ******************/ +#define FLASH_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP2 register ******************/ +#define FLASH_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */ + +/****************** Bit definition for FLASH_WRP3 register ******************/ +#define FLASH_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */ +#define FLASH_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */ + +#ifdef STM32F10X_CL +/******************************************************************************/ +/* Ethernet MAC Registers bits definitions */ +/******************************************************************************/ +/* Bit definition for Ethernet MAC Control Register register */ +#define ETH_MACCR_WD ((uint32_t)0x00800000) /* Watchdog disable */ +#define ETH_MACCR_JD ((uint32_t)0x00400000) /* Jabber disable */ +#define ETH_MACCR_IFG ((uint32_t)0x000E0000) /* Inter-frame gap */ + #define ETH_MACCR_IFG_96Bit ((uint32_t)0x00000000) /* Minimum IFG between frames during transmission is 96Bit */ + #define ETH_MACCR_IFG_88Bit ((uint32_t)0x00020000) /* Minimum IFG between frames during transmission is 88Bit */ + #define ETH_MACCR_IFG_80Bit ((uint32_t)0x00040000) /* Minimum IFG between frames during transmission is 80Bit */ + #define ETH_MACCR_IFG_72Bit ((uint32_t)0x00060000) /* Minimum IFG between frames during transmission is 72Bit */ + #define ETH_MACCR_IFG_64Bit ((uint32_t)0x00080000) /* Minimum IFG between frames during transmission is 64Bit */ + #define ETH_MACCR_IFG_56Bit ((uint32_t)0x000A0000) /* Minimum IFG between frames during transmission is 56Bit */ + #define ETH_MACCR_IFG_48Bit ((uint32_t)0x000C0000) /* Minimum IFG between frames during transmission is 48Bit */ + #define ETH_MACCR_IFG_40Bit ((uint32_t)0x000E0000) /* Minimum IFG between frames during transmission is 40Bit */ +#define ETH_MACCR_CSD ((uint32_t)0x00010000) /* Carrier sense disable (during transmission) */ +#define ETH_MACCR_FES ((uint32_t)0x00004000) /* Fast ethernet speed */ +#define ETH_MACCR_ROD ((uint32_t)0x00002000) /* Receive own disable */ +#define ETH_MACCR_LM ((uint32_t)0x00001000) /* loopback mode */ +#define ETH_MACCR_DM ((uint32_t)0x00000800) /* Duplex mode */ +#define ETH_MACCR_IPCO ((uint32_t)0x00000400) /* IP Checksum offload */ +#define ETH_MACCR_RD ((uint32_t)0x00000200) /* Retry disable */ +#define ETH_MACCR_APCS ((uint32_t)0x00000080) /* Automatic Pad/CRC stripping */ +#define ETH_MACCR_BL ((uint32_t)0x00000060) /* Back-off limit: random integer number (r) of slot time delays before rescheduling + a transmission attempt during retries after a collision: 0 =< r <2^k */ + #define ETH_MACCR_BL_10 ((uint32_t)0x00000000) /* k = min (n, 10) */ + #define ETH_MACCR_BL_8 ((uint32_t)0x00000020) /* k = min (n, 8) */ + #define ETH_MACCR_BL_4 ((uint32_t)0x00000040) /* k = min (n, 4) */ + #define ETH_MACCR_BL_1 ((uint32_t)0x00000060) /* k = min (n, 1) */ +#define ETH_MACCR_DC ((uint32_t)0x00000010) /* Defferal check */ +#define ETH_MACCR_TE ((uint32_t)0x00000008) /* Transmitter enable */ +#define ETH_MACCR_RE ((uint32_t)0x00000004) /* Receiver enable */ + +/* Bit definition for Ethernet MAC Frame Filter Register */ +#define ETH_MACFFR_RA ((uint32_t)0x80000000) /* Receive all */ +#define ETH_MACFFR_HPF ((uint32_t)0x00000400) /* Hash or perfect filter */ +#define ETH_MACFFR_SAF ((uint32_t)0x00000200) /* Source address filter enable */ +#define ETH_MACFFR_SAIF ((uint32_t)0x00000100) /* SA inverse filtering */ +#define ETH_MACFFR_PCF ((uint32_t)0x000000C0) /* Pass control frames: 3 cases */ + #define ETH_MACFFR_PCF_BlockAll ((uint32_t)0x00000040) /* MAC filters all control frames from reaching the application */ + #define ETH_MACFFR_PCF_ForwardAll ((uint32_t)0x00000080) /* MAC forwards all control frames to application even if they fail the Address Filter */ + #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0) /* MAC forwards control frames that pass the Address Filter. */ +#define ETH_MACFFR_BFD ((uint32_t)0x00000020) /* Broadcast frame disable */ +#define ETH_MACFFR_PAM ((uint32_t)0x00000010) /* Pass all mutlicast */ +#define ETH_MACFFR_DAIF ((uint32_t)0x00000008) /* DA Inverse filtering */ +#define ETH_MACFFR_HM ((uint32_t)0x00000004) /* Hash multicast */ +#define ETH_MACFFR_HU ((uint32_t)0x00000002) /* Hash unicast */ +#define ETH_MACFFR_PM ((uint32_t)0x00000001) /* Promiscuous mode */ + +/* Bit definition for Ethernet MAC Hash Table High Register */ +#define ETH_MACHTHR_HTH ((uint32_t)0xFFFFFFFF) /* Hash table high */ + +/* Bit definition for Ethernet MAC Hash Table Low Register */ +#define ETH_MACHTLR_HTL ((uint32_t)0xFFFFFFFF) /* Hash table low */ + +/* Bit definition for Ethernet MAC MII Address Register */ +#define ETH_MACMIIAR_PA ((uint32_t)0x0000F800) /* Physical layer address */ +#define ETH_MACMIIAR_MR ((uint32_t)0x000007C0) /* MII register in the selected PHY */ +#define ETH_MACMIIAR_CR ((uint32_t)0x0000001C) /* CR clock range: 6 cases */ + #define ETH_MACMIIAR_CR_Div42 ((uint32_t)0x00000000) /* HCLK:60-72 MHz; MDC clock= HCLK/42 */ + #define ETH_MACMIIAR_CR_Div16 ((uint32_t)0x00000008) /* HCLK:20-35 MHz; MDC clock= HCLK/16 */ + #define ETH_MACMIIAR_CR_Div26 ((uint32_t)0x0000000C) /* HCLK:35-60 MHz; MDC clock= HCLK/26 */ +#define ETH_MACMIIAR_MW ((uint32_t)0x00000002) /* MII write */ +#define ETH_MACMIIAR_MB ((uint32_t)0x00000001) /* MII busy */ + +/* Bit definition for Ethernet MAC MII Data Register */ +#define ETH_MACMIIDR_MD ((uint32_t)0x0000FFFF) /* MII data: read/write data from/to PHY */ + +/* Bit definition for Ethernet MAC Flow Control Register */ +#define ETH_MACFCR_PT ((uint32_t)0xFFFF0000) /* Pause time */ +#define ETH_MACFCR_ZQPD ((uint32_t)0x00000080) /* Zero-quanta pause disable */ +#define ETH_MACFCR_PLT ((uint32_t)0x00000030) /* Pause low threshold: 4 cases */ + #define ETH_MACFCR_PLT_Minus4 ((uint32_t)0x00000000) /* Pause time minus 4 slot times */ + #define ETH_MACFCR_PLT_Minus28 ((uint32_t)0x00000010) /* Pause time minus 28 slot times */ + #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020) /* Pause time minus 144 slot times */ + #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030) /* Pause time minus 256 slot times */ +#define ETH_MACFCR_UPFD ((uint32_t)0x00000008) /* Unicast pause frame detect */ +#define ETH_MACFCR_RFCE ((uint32_t)0x00000004) /* Receive flow control enable */ +#define ETH_MACFCR_TFCE ((uint32_t)0x00000002) /* Transmit flow control enable */ +#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001) /* Flow control busy/backpressure activate */ + +/* Bit definition for Ethernet MAC VLAN Tag Register */ +#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000) /* 12-bit VLAN tag comparison */ +#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF) /* VLAN tag identifier (for receive frames) */ + +/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */ +#define ETH_MACRWUFFR_D ((uint32_t)0xFFFFFFFF) /* Wake-up frame filter register data */ +/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers. + Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */ +/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask + Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask + Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask + Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask + Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command - + RSVD - Filter1 Command - RSVD - Filter0 Command + Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset + Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16 + Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */ + +/* Bit definition for Ethernet MAC PMT Control and Status Register */ +#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000) /* Wake-Up Frame Filter Register Pointer Reset */ +#define ETH_MACPMTCSR_GU ((uint32_t)0x00000200) /* Global Unicast */ +#define ETH_MACPMTCSR_WFR ((uint32_t)0x00000040) /* Wake-Up Frame Received */ +#define ETH_MACPMTCSR_MPR ((uint32_t)0x00000020) /* Magic Packet Received */ +#define ETH_MACPMTCSR_WFE ((uint32_t)0x00000004) /* Wake-Up Frame Enable */ +#define ETH_MACPMTCSR_MPE ((uint32_t)0x00000002) /* Magic Packet Enable */ +#define ETH_MACPMTCSR_PD ((uint32_t)0x00000001) /* Power Down */ + +/* Bit definition for Ethernet MAC Status Register */ +#define ETH_MACSR_TSTS ((uint32_t)0x00000200) /* Time stamp trigger status */ +#define ETH_MACSR_MMCTS ((uint32_t)0x00000040) /* MMC transmit status */ +#define ETH_MACSR_MMMCRS ((uint32_t)0x00000020) /* MMC receive status */ +#define ETH_MACSR_MMCS ((uint32_t)0x00000010) /* MMC status */ +#define ETH_MACSR_PMTS ((uint32_t)0x00000008) /* PMT status */ + +/* Bit definition for Ethernet MAC Interrupt Mask Register */ +#define ETH_MACIMR_TSTIM ((uint32_t)0x00000200) /* Time stamp trigger interrupt mask */ +#define ETH_MACIMR_PMTIM ((uint32_t)0x00000008) /* PMT interrupt mask */ + +/* Bit definition for Ethernet MAC Address0 High Register */ +#define ETH_MACA0HR_MACA0H ((uint32_t)0x0000FFFF) /* MAC address0 high */ + +/* Bit definition for Ethernet MAC Address0 Low Register */ +#define ETH_MACA0LR_MACA0L ((uint32_t)0xFFFFFFFF) /* MAC address0 low */ + +/* Bit definition for Ethernet MAC Address1 High Register */ +#define ETH_MACA1HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA1HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA1HR_MBC ((uint32_t)0x3F000000) /* Mask byte control: bits to mask for comparison of the MAC Address bytes */ + #define ETH_MACA1HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA1HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA1HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA1HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA1HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA1HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [7:0] */ +#define ETH_MACA1HR_MACA1H ((uint32_t)0x0000FFFF) /* MAC address1 high */ + +/* Bit definition for Ethernet MAC Address1 Low Register */ +#define ETH_MACA1LR_MACA1L ((uint32_t)0xFFFFFFFF) /* MAC address1 low */ + +/* Bit definition for Ethernet MAC Address2 High Register */ +#define ETH_MACA2HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA2HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA2HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */ + #define ETH_MACA2HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA2HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA2HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA2HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA2HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA2HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */ +#define ETH_MACA2HR_MACA2H ((uint32_t)0x0000FFFF) /* MAC address1 high */ + +/* Bit definition for Ethernet MAC Address2 Low Register */ +#define ETH_MACA2LR_MACA2L ((uint32_t)0xFFFFFFFF) /* MAC address2 low */ + +/* Bit definition for Ethernet MAC Address3 High Register */ +#define ETH_MACA3HR_AE ((uint32_t)0x80000000) /* Address enable */ +#define ETH_MACA3HR_SA ((uint32_t)0x40000000) /* Source address */ +#define ETH_MACA3HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */ + #define ETH_MACA3HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */ + #define ETH_MACA3HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */ + #define ETH_MACA3HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */ + #define ETH_MACA3HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */ + #define ETH_MACA3HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */ + #define ETH_MACA3HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */ +#define ETH_MACA3HR_MACA3H ((uint32_t)0x0000FFFF) /* MAC address3 high */ + +/* Bit definition for Ethernet MAC Address3 Low Register */ +#define ETH_MACA3LR_MACA3L ((uint32_t)0xFFFFFFFF) /* MAC address3 low */ + +/******************************************************************************/ +/* Ethernet MMC Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet MMC Contol Register */ +#define ETH_MMCCR_MCF ((uint32_t)0x00000008) /* MMC Counter Freeze */ +#define ETH_MMCCR_ROR ((uint32_t)0x00000004) /* Reset on Read */ +#define ETH_MMCCR_CSR ((uint32_t)0x00000002) /* Counter Stop Rollover */ +#define ETH_MMCCR_CR ((uint32_t)0x00000001) /* Counters Reset */ + +/* Bit definition for Ethernet MMC Receive Interrupt Register */ +#define ETH_MMCRIR_RGUFS ((uint32_t)0x00020000) /* Set when Rx good unicast frames counter reaches half the maximum value */ +#define ETH_MMCRIR_RFAES ((uint32_t)0x00000040) /* Set when Rx alignment error counter reaches half the maximum value */ +#define ETH_MMCRIR_RFCES ((uint32_t)0x00000020) /* Set when Rx crc error counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmit Interrupt Register */ +#define ETH_MMCTIR_TGFS ((uint32_t)0x00200000) /* Set when Tx good frame count counter reaches half the maximum value */ +#define ETH_MMCTIR_TGFMSCS ((uint32_t)0x00008000) /* Set when Tx good multi col counter reaches half the maximum value */ +#define ETH_MMCTIR_TGFSCS ((uint32_t)0x00004000) /* Set when Tx good single col counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */ +#define ETH_MMCRIMR_RGUFM ((uint32_t)0x00020000) /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */ +#define ETH_MMCRIMR_RFAEM ((uint32_t)0x00000040) /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */ +#define ETH_MMCRIMR_RFCEM ((uint32_t)0x00000020) /* Mask the interrupt when Rx crc error counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */ +#define ETH_MMCTIMR_TGFM ((uint32_t)0x00200000) /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */ +#define ETH_MMCTIMR_TGFMSCM ((uint32_t)0x00008000) /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */ +#define ETH_MMCTIMR_TGFSCM ((uint32_t)0x00004000) /* Mask the interrupt when Tx good single col counter reaches half the maximum value */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */ +#define ETH_MMCTGFSCCR_TGFSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */ +#define ETH_MMCTGFMSCCR_TGFMSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */ + +/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */ +#define ETH_MMCTGFCR_TGFC ((uint32_t)0xFFFFFFFF) /* Number of good frames transmitted. */ + +/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */ +#define ETH_MMCRFCECR_RFCEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with CRC error. */ + +/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */ +#define ETH_MMCRFAECR_RFAEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with alignment (dribble) error */ + +/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */ +#define ETH_MMCRGUFCR_RGUFC ((uint32_t)0xFFFFFFFF) /* Number of good unicast frames received. */ + +/******************************************************************************/ +/* Ethernet PTP Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet PTP Time Stamp Contol Register */ +#define ETH_PTPTSCR_TSARU ((uint32_t)0x00000020) /* Addend register update */ +#define ETH_PTPTSCR_TSITE ((uint32_t)0x00000010) /* Time stamp interrupt trigger enable */ +#define ETH_PTPTSCR_TSSTU ((uint32_t)0x00000008) /* Time stamp update */ +#define ETH_PTPTSCR_TSSTI ((uint32_t)0x00000004) /* Time stamp initialize */ +#define ETH_PTPTSCR_TSFCU ((uint32_t)0x00000002) /* Time stamp fine or coarse update */ +#define ETH_PTPTSCR_TSE ((uint32_t)0x00000001) /* Time stamp enable */ + +/* Bit definition for Ethernet PTP Sub-Second Increment Register */ +#define ETH_PTPSSIR_STSSI ((uint32_t)0x000000FF) /* System time Sub-second increment value */ + +/* Bit definition for Ethernet PTP Time Stamp High Register */ +#define ETH_PTPTSHR_STS ((uint32_t)0xFFFFFFFF) /* System Time second */ + +/* Bit definition for Ethernet PTP Time Stamp Low Register */ +#define ETH_PTPTSLR_STPNS ((uint32_t)0x80000000) /* System Time Positive or negative time */ +#define ETH_PTPTSLR_STSS ((uint32_t)0x7FFFFFFF) /* System Time sub-seconds */ + +/* Bit definition for Ethernet PTP Time Stamp High Update Register */ +#define ETH_PTPTSHUR_TSUS ((uint32_t)0xFFFFFFFF) /* Time stamp update seconds */ + +/* Bit definition for Ethernet PTP Time Stamp Low Update Register */ +#define ETH_PTPTSLUR_TSUPNS ((uint32_t)0x80000000) /* Time stamp update Positive or negative time */ +#define ETH_PTPTSLUR_TSUSS ((uint32_t)0x7FFFFFFF) /* Time stamp update sub-seconds */ + +/* Bit definition for Ethernet PTP Time Stamp Addend Register */ +#define ETH_PTPTSAR_TSA ((uint32_t)0xFFFFFFFF) /* Time stamp addend */ + +/* Bit definition for Ethernet PTP Target Time High Register */ +#define ETH_PTPTTHR_TTSH ((uint32_t)0xFFFFFFFF) /* Target time stamp high */ + +/* Bit definition for Ethernet PTP Target Time Low Register */ +#define ETH_PTPTTLR_TTSL ((uint32_t)0xFFFFFFFF) /* Target time stamp low */ + +/******************************************************************************/ +/* Ethernet DMA Registers bits definition */ +/******************************************************************************/ + +/* Bit definition for Ethernet DMA Bus Mode Register */ +#define ETH_DMABMR_AAB ((uint32_t)0x02000000) /* Address-Aligned beats */ +#define ETH_DMABMR_FPM ((uint32_t)0x01000000) /* 4xPBL mode */ +#define ETH_DMABMR_USP ((uint32_t)0x00800000) /* Use separate PBL */ +#define ETH_DMABMR_RDP ((uint32_t)0x007E0000) /* RxDMA PBL */ + #define ETH_DMABMR_RDP_1Beat ((uint32_t)0x00020000) /* maximum number of beats to be transferred in one RxDMA transaction is 1 */ + #define ETH_DMABMR_RDP_2Beat ((uint32_t)0x00040000) /* maximum number of beats to be transferred in one RxDMA transaction is 2 */ + #define ETH_DMABMR_RDP_4Beat ((uint32_t)0x00080000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */ + #define ETH_DMABMR_RDP_8Beat ((uint32_t)0x00100000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */ + #define ETH_DMABMR_RDP_16Beat ((uint32_t)0x00200000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */ + #define ETH_DMABMR_RDP_32Beat ((uint32_t)0x00400000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */ + #define ETH_DMABMR_RDP_4xPBL_4Beat ((uint32_t)0x01020000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */ + #define ETH_DMABMR_RDP_4xPBL_8Beat ((uint32_t)0x01040000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */ + #define ETH_DMABMR_RDP_4xPBL_16Beat ((uint32_t)0x01080000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */ + #define ETH_DMABMR_RDP_4xPBL_32Beat ((uint32_t)0x01100000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */ + #define ETH_DMABMR_RDP_4xPBL_64Beat ((uint32_t)0x01200000) /* maximum number of beats to be transferred in one RxDMA transaction is 64 */ + #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000) /* maximum number of beats to be transferred in one RxDMA transaction is 128 */ +#define ETH_DMABMR_FB ((uint32_t)0x00010000) /* Fixed Burst */ +#define ETH_DMABMR_RTPR ((uint32_t)0x0000C000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_1_1 ((uint32_t)0x00000000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_2_1 ((uint32_t)0x00004000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_3_1 ((uint32_t)0x00008000) /* Rx Tx priority ratio */ + #define ETH_DMABMR_RTPR_4_1 ((uint32_t)0x0000C000) /* Rx Tx priority ratio */ +#define ETH_DMABMR_PBL ((uint32_t)0x00003F00) /* Programmable burst length */ + #define ETH_DMABMR_PBL_1Beat ((uint32_t)0x00000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */ + #define ETH_DMABMR_PBL_2Beat ((uint32_t)0x00000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */ + #define ETH_DMABMR_PBL_4Beat ((uint32_t)0x00000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ + #define ETH_DMABMR_PBL_8Beat ((uint32_t)0x00000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ + #define ETH_DMABMR_PBL_16Beat ((uint32_t)0x00001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ + #define ETH_DMABMR_PBL_32Beat ((uint32_t)0x00002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ + #define ETH_DMABMR_PBL_4xPBL_4Beat ((uint32_t)0x01000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ + #define ETH_DMABMR_PBL_4xPBL_8Beat ((uint32_t)0x01000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ + #define ETH_DMABMR_PBL_4xPBL_16Beat ((uint32_t)0x01000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ + #define ETH_DMABMR_PBL_4xPBL_32Beat ((uint32_t)0x01000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ + #define ETH_DMABMR_PBL_4xPBL_64Beat ((uint32_t)0x01001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */ + #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */ +#define ETH_DMABMR_DSL ((uint32_t)0x0000007C) /* Descriptor Skip Length */ +#define ETH_DMABMR_DA ((uint32_t)0x00000002) /* DMA arbitration scheme */ +#define ETH_DMABMR_SR ((uint32_t)0x00000001) /* Software reset */ + +/* Bit definition for Ethernet DMA Transmit Poll Demand Register */ +#define ETH_DMATPDR_TPD ((uint32_t)0xFFFFFFFF) /* Transmit poll demand */ + +/* Bit definition for Ethernet DMA Receive Poll Demand Register */ +#define ETH_DMARPDR_RPD ((uint32_t)0xFFFFFFFF) /* Receive poll demand */ + +/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */ +#define ETH_DMARDLAR_SRL ((uint32_t)0xFFFFFFFF) /* Start of receive list */ + +/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */ +#define ETH_DMATDLAR_STL ((uint32_t)0xFFFFFFFF) /* Start of transmit list */ + +/* Bit definition for Ethernet DMA Status Register */ +#define ETH_DMASR_TSTS ((uint32_t)0x20000000) /* Time-stamp trigger status */ +#define ETH_DMASR_PMTS ((uint32_t)0x10000000) /* PMT status */ +#define ETH_DMASR_MMCS ((uint32_t)0x08000000) /* MMC status */ +#define ETH_DMASR_EBS ((uint32_t)0x03800000) /* Error bits status */ + /* combination with EBS[2:0] for GetFlagStatus function */ + #define ETH_DMASR_EBS_DescAccess ((uint32_t)0x02000000) /* Error bits 0-data buffer, 1-desc. access */ + #define ETH_DMASR_EBS_ReadTransf ((uint32_t)0x01000000) /* Error bits 0-write trnsf, 1-read transfr */ + #define ETH_DMASR_EBS_DataTransfTx ((uint32_t)0x00800000) /* Error bits 0-Rx DMA, 1-Tx DMA */ +#define ETH_DMASR_TPS ((uint32_t)0x00700000) /* Transmit process state */ + #define ETH_DMASR_TPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Tx Command issued */ + #define ETH_DMASR_TPS_Fetching ((uint32_t)0x00100000) /* Running - fetching the Tx descriptor */ + #define ETH_DMASR_TPS_Waiting ((uint32_t)0x00200000) /* Running - waiting for status */ + #define ETH_DMASR_TPS_Reading ((uint32_t)0x00300000) /* Running - reading the data from host memory */ + #define ETH_DMASR_TPS_Suspended ((uint32_t)0x00600000) /* Suspended - Tx Descriptor unavailabe */ + #define ETH_DMASR_TPS_Closing ((uint32_t)0x00700000) /* Running - closing Rx descriptor */ +#define ETH_DMASR_RPS ((uint32_t)0x000E0000) /* Receive process state */ + #define ETH_DMASR_RPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Rx Command issued */ + #define ETH_DMASR_RPS_Fetching ((uint32_t)0x00020000) /* Running - fetching the Rx descriptor */ + #define ETH_DMASR_RPS_Waiting ((uint32_t)0x00060000) /* Running - waiting for packet */ + #define ETH_DMASR_RPS_Suspended ((uint32_t)0x00080000) /* Suspended - Rx Descriptor unavailable */ + #define ETH_DMASR_RPS_Closing ((uint32_t)0x000A0000) /* Running - closing descriptor */ + #define ETH_DMASR_RPS_Queuing ((uint32_t)0x000E0000) /* Running - queuing the recieve frame into host memory */ +#define ETH_DMASR_NIS ((uint32_t)0x00010000) /* Normal interrupt summary */ +#define ETH_DMASR_AIS ((uint32_t)0x00008000) /* Abnormal interrupt summary */ +#define ETH_DMASR_ERS ((uint32_t)0x00004000) /* Early receive status */ +#define ETH_DMASR_FBES ((uint32_t)0x00002000) /* Fatal bus error status */ +#define ETH_DMASR_ETS ((uint32_t)0x00000400) /* Early transmit status */ +#define ETH_DMASR_RWTS ((uint32_t)0x00000200) /* Receive watchdog timeout status */ +#define ETH_DMASR_RPSS ((uint32_t)0x00000100) /* Receive process stopped status */ +#define ETH_DMASR_RBUS ((uint32_t)0x00000080) /* Receive buffer unavailable status */ +#define ETH_DMASR_RS ((uint32_t)0x00000040) /* Receive status */ +#define ETH_DMASR_TUS ((uint32_t)0x00000020) /* Transmit underflow status */ +#define ETH_DMASR_ROS ((uint32_t)0x00000010) /* Receive overflow status */ +#define ETH_DMASR_TJTS ((uint32_t)0x00000008) /* Transmit jabber timeout status */ +#define ETH_DMASR_TBUS ((uint32_t)0x00000004) /* Transmit buffer unavailable status */ +#define ETH_DMASR_TPSS ((uint32_t)0x00000002) /* Transmit process stopped status */ +#define ETH_DMASR_TS ((uint32_t)0x00000001) /* Transmit status */ + +/* Bit definition for Ethernet DMA Operation Mode Register */ +#define ETH_DMAOMR_DTCEFD ((uint32_t)0x04000000) /* Disable Dropping of TCP/IP checksum error frames */ +#define ETH_DMAOMR_RSF ((uint32_t)0x02000000) /* Receive store and forward */ +#define ETH_DMAOMR_DFRF ((uint32_t)0x01000000) /* Disable flushing of received frames */ +#define ETH_DMAOMR_TSF ((uint32_t)0x00200000) /* Transmit store and forward */ +#define ETH_DMAOMR_FTF ((uint32_t)0x00100000) /* Flush transmit FIFO */ +#define ETH_DMAOMR_TTC ((uint32_t)0x0001C000) /* Transmit threshold control */ + #define ETH_DMAOMR_TTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Transmit FIFO is 64 Bytes */ + #define ETH_DMAOMR_TTC_128Bytes ((uint32_t)0x00004000) /* threshold level of the MTL Transmit FIFO is 128 Bytes */ + #define ETH_DMAOMR_TTC_192Bytes ((uint32_t)0x00008000) /* threshold level of the MTL Transmit FIFO is 192 Bytes */ + #define ETH_DMAOMR_TTC_256Bytes ((uint32_t)0x0000C000) /* threshold level of the MTL Transmit FIFO is 256 Bytes */ + #define ETH_DMAOMR_TTC_40Bytes ((uint32_t)0x00010000) /* threshold level of the MTL Transmit FIFO is 40 Bytes */ + #define ETH_DMAOMR_TTC_32Bytes ((uint32_t)0x00014000) /* threshold level of the MTL Transmit FIFO is 32 Bytes */ + #define ETH_DMAOMR_TTC_24Bytes ((uint32_t)0x00018000) /* threshold level of the MTL Transmit FIFO is 24 Bytes */ + #define ETH_DMAOMR_TTC_16Bytes ((uint32_t)0x0001C000) /* threshold level of the MTL Transmit FIFO is 16 Bytes */ +#define ETH_DMAOMR_ST ((uint32_t)0x00002000) /* Start/stop transmission command */ +#define ETH_DMAOMR_FEF ((uint32_t)0x00000080) /* Forward error frames */ +#define ETH_DMAOMR_FUGF ((uint32_t)0x00000040) /* Forward undersized good frames */ +#define ETH_DMAOMR_RTC ((uint32_t)0x00000018) /* receive threshold control */ + #define ETH_DMAOMR_RTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Receive FIFO is 64 Bytes */ + #define ETH_DMAOMR_RTC_32Bytes ((uint32_t)0x00000008) /* threshold level of the MTL Receive FIFO is 32 Bytes */ + #define ETH_DMAOMR_RTC_96Bytes ((uint32_t)0x00000010) /* threshold level of the MTL Receive FIFO is 96 Bytes */ + #define ETH_DMAOMR_RTC_128Bytes ((uint32_t)0x00000018) /* threshold level of the MTL Receive FIFO is 128 Bytes */ +#define ETH_DMAOMR_OSF ((uint32_t)0x00000004) /* operate on second frame */ +#define ETH_DMAOMR_SR ((uint32_t)0x00000002) /* Start/stop receive */ + +/* Bit definition for Ethernet DMA Interrupt Enable Register */ +#define ETH_DMAIER_NISE ((uint32_t)0x00010000) /* Normal interrupt summary enable */ +#define ETH_DMAIER_AISE ((uint32_t)0x00008000) /* Abnormal interrupt summary enable */ +#define ETH_DMAIER_ERIE ((uint32_t)0x00004000) /* Early receive interrupt enable */ +#define ETH_DMAIER_FBEIE ((uint32_t)0x00002000) /* Fatal bus error interrupt enable */ +#define ETH_DMAIER_ETIE ((uint32_t)0x00000400) /* Early transmit interrupt enable */ +#define ETH_DMAIER_RWTIE ((uint32_t)0x00000200) /* Receive watchdog timeout interrupt enable */ +#define ETH_DMAIER_RPSIE ((uint32_t)0x00000100) /* Receive process stopped interrupt enable */ +#define ETH_DMAIER_RBUIE ((uint32_t)0x00000080) /* Receive buffer unavailable interrupt enable */ +#define ETH_DMAIER_RIE ((uint32_t)0x00000040) /* Receive interrupt enable */ +#define ETH_DMAIER_TUIE ((uint32_t)0x00000020) /* Transmit Underflow interrupt enable */ +#define ETH_DMAIER_ROIE ((uint32_t)0x00000010) /* Receive Overflow interrupt enable */ +#define ETH_DMAIER_TJTIE ((uint32_t)0x00000008) /* Transmit jabber timeout interrupt enable */ +#define ETH_DMAIER_TBUIE ((uint32_t)0x00000004) /* Transmit buffer unavailable interrupt enable */ +#define ETH_DMAIER_TPSIE ((uint32_t)0x00000002) /* Transmit process stopped interrupt enable */ +#define ETH_DMAIER_TIE ((uint32_t)0x00000001) /* Transmit interrupt enable */ + +/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */ +#define ETH_DMAMFBOCR_OFOC ((uint32_t)0x10000000) /* Overflow bit for FIFO overflow counter */ +#define ETH_DMAMFBOCR_MFA ((uint32_t)0x0FFE0000) /* Number of frames missed by the application */ +#define ETH_DMAMFBOCR_OMFC ((uint32_t)0x00010000) /* Overflow bit for missed frame counter */ +#define ETH_DMAMFBOCR_MFC ((uint32_t)0x0000FFFF) /* Number of frames missed by the controller */ + +/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */ +#define ETH_DMACHTDR_HTDAP ((uint32_t)0xFFFFFFFF) /* Host transmit descriptor address pointer */ + +/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */ +#define ETH_DMACHRDR_HRDAP ((uint32_t)0xFFFFFFFF) /* Host receive descriptor address pointer */ + +/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */ +#define ETH_DMACHTBAR_HTBAP ((uint32_t)0xFFFFFFFF) /* Host transmit buffer address pointer */ + +/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */ +#define ETH_DMACHRBAR_HRBAP ((uint32_t)0xFFFFFFFF) /* Host receive buffer address pointer */ +#endif /* STM32F10X_CL */ + +/** + * @} + */ + + /** + * @} + */ + +#ifdef USE_STDPERIPH_DRIVER + #include "stm32f10x_conf.h" +#endif + +/** @addtogroup Exported_macro + * @{ + */ + +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_H */ + +/** + * @} + */ + + /** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/system_stm32f10x.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/system_stm32f10x.c new file mode 100644 index 0000000..71efc85 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/system_stm32f10x.c @@ -0,0 +1,1094 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * factors, AHB/APBx prescalers and Flash settings). + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f10x_xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the HSI (8 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to + * configure the system clock before to branch to main program. + * + * 3. If the system clock source selected by user fails to startup, the SystemInit() + * function will do nothing and HSI still used as system clock source. User can + * add some code to deal with this issue inside the SetSysClock() function. + * + * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on + * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. + * When HSE is used as system clock source, directly or through PLL, and you + * are using different crystal you have to adapt the HSE value to your own + * configuration. + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** @addtogroup STM32F10x_System_Private_Includes + * @{ + */ + +#include "stm32f10x.h" + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Defines + * @{ + */ + +/*!< Uncomment the line corresponding to the desired System clock (SYSCLK) + frequency (after reset the HSI is used as SYSCLK source) + + IMPORTANT NOTE: + ============== + 1. After each device reset the HSI is used as System clock source. + + 2. Please make sure that the selected System clock doesn't exceed your device's + maximum frequency. + + 3. If none of the define below is enabled, the HSI is used as System clock + source. + + 4. The System clock configuration functions provided within this file assume that: + - For Low, Medium and High density Value line devices an external 8MHz + crystal is used to drive the System clock. + - For Low, Medium and High density devices an external 8MHz crystal is + used to drive the System clock. + - For Connectivity line devices an external 25MHz crystal is used to drive + the System clock. + If you are using different crystal you have to adapt those functions accordingly. + */ + +#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ + #define SYSCLK_FREQ_24MHz 24000000 +#else +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ +/* #define SYSCLK_FREQ_24MHz 24000000 */ +/* #define SYSCLK_FREQ_36MHz 36000000 */ +/* #define SYSCLK_FREQ_48MHz 48000000 */ +/* #define SYSCLK_FREQ_56MHz 56000000 */ +#define SYSCLK_FREQ_72MHz 72000000 +#endif + +/*!< Uncomment the following line if you need to use external SRAM mounted + on STM3210E-EVAL board (STM32 High density and XL-density devices) or on + STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) +/* #define DATA_IN_ExtSRAM */ +#endif + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ + + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Variables + * @{ + */ + +/******************************************************************************* +* Clock Definitions +*******************************************************************************/ +#ifdef SYSCLK_FREQ_HSE + uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_24MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_36MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */ +#else /*!< HSI Selected as System Clock source */ + uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */ +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); + +#ifdef SYSCLK_FREQ_HSE + static void SetSysClockToHSE(void); +#elif defined SYSCLK_FREQ_24MHz + static void SetSysClockTo24(void); +#elif defined SYSCLK_FREQ_36MHz + static void SetSysClockTo36(void); +#elif defined SYSCLK_FREQ_48MHz + static void SetSysClockTo48(void); +#elif defined SYSCLK_FREQ_56MHz + static void SetSysClockTo56(void); +#elif defined SYSCLK_FREQ_72MHz + static void SetSysClockTo72(void); +#endif + +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ +#ifndef STM32F10X_CL + RCC->CFGR &= (uint32_t)0xF8FF0000; +#else + RCC->CFGR &= (uint32_t)0xF0FF0000; +#endif /* STM32F10X_CL */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + +#ifdef STM32F10X_CL + /* Reset PLL2ON and PLL3ON bits */ + RCC->CR &= (uint32_t)0xEBFFFFFF; + + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x00FF0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#else + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) + #ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); + #endif /* DATA_IN_ExtSRAM */ +#endif + + /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ + /* Configure the Flash Latency cycles and enable prefetch buffer */ + SetSysClock(); + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz or 25 MHz, depedning on the product used), user has to ensure + * that HSE_VALUE is same as the real frequency of the crystal used. + * Otherwise, this function may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0; + +#ifdef STM32F10X_CL + uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + uint32_t prediv1factor = 0; +#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */ + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + +#ifndef STM32F10X_CL + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + { + #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + SystemCoreClock = (HSE_VALUE >> 1) * pllmull; + } + else + { + SystemCoreClock = HSE_VALUE * pllmull; + } + #endif + } +#else + pllmull = pllmull >> 18; + + if (pllmull != 0x0D) + { + pllmull += 2; + } + else + { /* PLL multiplication factor = PLL input clock * 6.5 */ + pllmull = 13 / 2; + } + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + {/* PREDIV1 selected as PLL clock entry */ + + /* Get PREDIV1 clock source and division factor */ + prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + + if (prediv1source == 0) + { + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + } + else + {/* PLL2 clock selected as PREDIV1 clock entry */ + + /* Get PREDIV2 division factor and PLL2 multiplication factor */ + prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; + pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; + SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; + } + } +#endif /* STM32F10X_CL */ + break; + + default: + SystemCoreClock = HSI_VALUE; + break; + } + + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * @param None + * @retval None + */ +static void SetSysClock(void) +{ +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_24MHz + SetSysClockTo24(); +#elif defined SYSCLK_FREQ_36MHz + SetSysClockTo36(); +#elif defined SYSCLK_FREQ_48MHz + SetSysClockTo48(); +#elif defined SYSCLK_FREQ_56MHz + SetSysClockTo56(); +#elif defined SYSCLK_FREQ_72MHz + SetSysClockTo72(); +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + source (default after reset) */ +} + +/** + * @brief Setup the external memory controller. Called in startup_stm32f10x.s + * before jump to __main + * @param None + * @retval None + */ +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f10x_xx.s/.c before jump to main. + * This function configures the external SRAM mounted on STM3210E-EVAL + * board (STM32 High density devices). This SRAM will be used as program + * data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is + required, then adjust the Register Addresses */ + + /* Enable FSMC clock */ + RCC->AHBENR = 0x00000114; + + /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ + RCC->APB2ENR = 0x000001E0; + +/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ +/*---------------- SRAM Address lines configuration -------------------------*/ +/*---------------- NOE and NWE configuration --------------------------------*/ +/*---------------- NE3 configuration ----------------------------------------*/ +/*---------------- NBL0, NBL1 configuration ---------------------------------*/ + + GPIOD->CRL = 0x44BB44BB; + GPIOD->CRH = 0xBBBBBBBB; + + GPIOE->CRL = 0xB44444BB; + GPIOE->CRH = 0xBBBBBBBB; + + GPIOF->CRL = 0x44BBBBBB; + GPIOF->CRH = 0xBBBB4444; + + GPIOG->CRL = 0x44BBBBBB; + GPIOG->CRH = 0x44444B44; + +/*---------------- FSMC Configuration ---------------------------------------*/ +/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ + + FSMC_Bank1->BTCR[4] = 0x00001011; + FSMC_Bank1->BTCR[5] = 0x00000200; +} +#endif /* DATA_IN_ExtSRAM */ + +#ifdef SYSCLK_FREQ_HSE +/** + * @brief Selects HSE as System clock source and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockToHSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + +#ifndef STM32F10X_CL + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#else + if (HSE_VALUE <= 24000000) + { + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; + } + else + { + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + } +#endif /* STM32F10X_CL */ +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + + /* Select HSE as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_24MHz +/** + * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo24(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL6); + + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_36MHz +/** + * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo36(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + + /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL9); + + /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + +#else + /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_48MHz +/** + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo48(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_56MHz +/** + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo56(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL7); +#else + /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7); + +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_72MHz +/** + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo72(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL9); +#else + /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | + RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/system_stm32f10x.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/system_stm32f10x.h new file mode 100644 index 0000000..54bc1ab --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/CMSIS/system_stm32f10x.h @@ -0,0 +1,98 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** + * @brief Define to prevent recursive inclusion + */ +#ifndef __SYSTEM_STM32F10X_H +#define __SYSTEM_STM32F10X_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup STM32F10x_System_Includes + * @{ + */ + +/** + * @} + */ + + +/** @addtogroup STM32F10x_System_Exported_types + * @{ + */ + +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Exported_Functions + * @{ + */ + +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*__SYSTEM_STM32F10X_H */ + +/** + * @} + */ + +/** + * @} + */ +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/misc.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/misc.h new file mode 100644 index 0000000..9a6bd07 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/misc.h @@ -0,0 +1,220 @@ +/** + ****************************************************************************** + * @file misc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the miscellaneous + * firmware library functions (add-on to CMSIS functions). + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MISC_H +#define __MISC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup MISC + * @{ + */ + +/** @defgroup MISC_Exported_Types + * @{ + */ + +/** + * @brief NVIC Init Structure definition + */ + +typedef struct +{ + uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled. + This parameter can be a value of @ref IRQn_Type + (For the complete STM32 Devices IRQ Channels list, please + refer to stm32f10x.h file) */ + + uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel + specified in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref NVIC_Priority_Table */ + + uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified + in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref NVIC_Priority_Table */ + + FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel + will be enabled or disabled. + This parameter can be set either to ENABLE or DISABLE */ +} NVIC_InitTypeDef; + +/** + * @} + */ + +/** @defgroup NVIC_Priority_Table + * @{ + */ + +/** +@code + The table below gives the allowed values of the pre-emption priority and subpriority according + to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function + ============================================================================================================================ + NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description + ============================================================================================================================ + NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority + | | | 4 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority + | | | 3 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority + | | | 2 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority + | | | 1 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority + | | | 0 bits for subpriority + ============================================================================================================================ +@endcode +*/ + +/** + * @} + */ + +/** @defgroup MISC_Exported_Constants + * @{ + */ + +/** @defgroup Vector_Table_Base + * @{ + */ + +#define NVIC_VectTab_RAM ((uint32_t)0x20000000) +#define NVIC_VectTab_FLASH ((uint32_t)0x08000000) +#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \ + ((VECTTAB) == NVIC_VectTab_FLASH)) +/** + * @} + */ + +/** @defgroup System_Low_Power + * @{ + */ + +#define NVIC_LP_SEVONPEND ((uint8_t)0x10) +#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04) +#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02) +#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ + ((LP) == NVIC_LP_SLEEPDEEP) || \ + ((LP) == NVIC_LP_SLEEPONEXIT)) +/** + * @} + */ + +/** @defgroup Preemption_Priority_Group + * @{ + */ + +#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ + +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \ + ((GROUP) == NVIC_PriorityGroup_1) || \ + ((GROUP) == NVIC_PriorityGroup_2) || \ + ((GROUP) == NVIC_PriorityGroup_3) || \ + ((GROUP) == NVIC_PriorityGroup_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF) + +/** + * @} + */ + +/** @defgroup SysTick_clock_source + * @{ + */ + +#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB) +#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004) +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \ + ((SOURCE) == SysTick_CLKSource_HCLK_Div8)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup MISC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Exported_Functions + * @{ + */ + +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup); +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset); +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState); +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource); + +#ifdef __cplusplus +} +#endif + +#endif /* __MISC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_adc.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_adc.h new file mode 100644 index 0000000..769c6a8 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_adc.h @@ -0,0 +1,484 @@ +/** + ****************************************************************************** + * @file stm32f10x_adc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the ADC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_ADC_H +#define __STM32F10x_ADC_H + +#ifdef __cplusplus + extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/** @defgroup ADC_Exported_Types + * @{ + */ + +/** + * @brief ADC Init structure definition + */ + +typedef struct +{ + uint32_t ADC_Mode; /*!< Configures the ADC to operate in independent or + dual mode. + This parameter can be a value of @ref ADC_mode */ + + FunctionalState ADC_ScanConvMode; /*!< Specifies whether the conversion is performed in + Scan (multichannels) or Single (one channel) mode. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion is performed in + Continuous or Single mode. + This parameter can be set to ENABLE or DISABLE. */ + + uint32_t ADC_ExternalTrigConv; /*!< Defines the external trigger used to start the analog + to digital conversion of regular channels. This parameter + can be a value of @ref ADC_external_trigger_sources_for_regular_channels_conversion */ + + uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment is left or right. + This parameter can be a value of @ref ADC_data_align */ + + uint8_t ADC_NbrOfChannel; /*!< Specifies the number of ADC channels that will be converted + using the sequencer for regular channel group. + This parameter must range from 1 to 16. */ +}ADC_InitTypeDef; +/** + * @} + */ + +/** @defgroup ADC_Exported_Constants + * @{ + */ + +#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \ + ((PERIPH) == ADC2) || \ + ((PERIPH) == ADC3)) + +#define IS_ADC_DMA_PERIPH(PERIPH) (((PERIPH) == ADC1) || \ + ((PERIPH) == ADC3)) + +/** @defgroup ADC_mode + * @{ + */ + +#define ADC_Mode_Independent ((uint32_t)0x00000000) +#define ADC_Mode_RegInjecSimult ((uint32_t)0x00010000) +#define ADC_Mode_RegSimult_AlterTrig ((uint32_t)0x00020000) +#define ADC_Mode_InjecSimult_FastInterl ((uint32_t)0x00030000) +#define ADC_Mode_InjecSimult_SlowInterl ((uint32_t)0x00040000) +#define ADC_Mode_InjecSimult ((uint32_t)0x00050000) +#define ADC_Mode_RegSimult ((uint32_t)0x00060000) +#define ADC_Mode_FastInterl ((uint32_t)0x00070000) +#define ADC_Mode_SlowInterl ((uint32_t)0x00080000) +#define ADC_Mode_AlterTrig ((uint32_t)0x00090000) + +#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \ + ((MODE) == ADC_Mode_RegInjecSimult) || \ + ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \ + ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \ + ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \ + ((MODE) == ADC_Mode_InjecSimult) || \ + ((MODE) == ADC_Mode_RegSimult) || \ + ((MODE) == ADC_Mode_FastInterl) || \ + ((MODE) == ADC_Mode_SlowInterl) || \ + ((MODE) == ADC_Mode_AlterTrig)) +/** + * @} + */ + +/** @defgroup ADC_external_trigger_sources_for_regular_channels_conversion + * @{ + */ + +#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x00020000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x00060000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x00080000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x000A0000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO ((uint32_t)0x000C0000) /*!< For ADC1 and ADC2 */ + +#define ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x00040000) /*!< For ADC1, ADC2 and ADC3 */ +#define ADC_ExternalTrigConv_None ((uint32_t)0x000E0000) /*!< For ADC1, ADC2 and ADC3 */ + +#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x00000000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x00020000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x00060000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x00080000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x000A0000) /*!< For ADC3 only */ +#define ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x000C0000) /*!< For ADC3 only */ + +#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \ + ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_None) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3)) +/** + * @} + */ + +/** @defgroup ADC_data_align + * @{ + */ + +#define ADC_DataAlign_Right ((uint32_t)0x00000000) +#define ADC_DataAlign_Left ((uint32_t)0x00000800) +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \ + ((ALIGN) == ADC_DataAlign_Left)) +/** + * @} + */ + +/** @defgroup ADC_channels + * @{ + */ + +#define ADC_Channel_0 ((uint8_t)0x00) +#define ADC_Channel_1 ((uint8_t)0x01) +#define ADC_Channel_2 ((uint8_t)0x02) +#define ADC_Channel_3 ((uint8_t)0x03) +#define ADC_Channel_4 ((uint8_t)0x04) +#define ADC_Channel_5 ((uint8_t)0x05) +#define ADC_Channel_6 ((uint8_t)0x06) +#define ADC_Channel_7 ((uint8_t)0x07) +#define ADC_Channel_8 ((uint8_t)0x08) +#define ADC_Channel_9 ((uint8_t)0x09) +#define ADC_Channel_10 ((uint8_t)0x0A) +#define ADC_Channel_11 ((uint8_t)0x0B) +#define ADC_Channel_12 ((uint8_t)0x0C) +#define ADC_Channel_13 ((uint8_t)0x0D) +#define ADC_Channel_14 ((uint8_t)0x0E) +#define ADC_Channel_15 ((uint8_t)0x0F) +#define ADC_Channel_16 ((uint8_t)0x10) +#define ADC_Channel_17 ((uint8_t)0x11) + +#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16) +#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17) + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \ + ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \ + ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \ + ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \ + ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \ + ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \ + ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \ + ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \ + ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17)) +/** + * @} + */ + +/** @defgroup ADC_sampling_time + * @{ + */ + +#define ADC_SampleTime_1Cycles5 ((uint8_t)0x00) +#define ADC_SampleTime_7Cycles5 ((uint8_t)0x01) +#define ADC_SampleTime_13Cycles5 ((uint8_t)0x02) +#define ADC_SampleTime_28Cycles5 ((uint8_t)0x03) +#define ADC_SampleTime_41Cycles5 ((uint8_t)0x04) +#define ADC_SampleTime_55Cycles5 ((uint8_t)0x05) +#define ADC_SampleTime_71Cycles5 ((uint8_t)0x06) +#define ADC_SampleTime_239Cycles5 ((uint8_t)0x07) +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \ + ((TIME) == ADC_SampleTime_7Cycles5) || \ + ((TIME) == ADC_SampleTime_13Cycles5) || \ + ((TIME) == ADC_SampleTime_28Cycles5) || \ + ((TIME) == ADC_SampleTime_41Cycles5) || \ + ((TIME) == ADC_SampleTime_55Cycles5) || \ + ((TIME) == ADC_SampleTime_71Cycles5) || \ + ((TIME) == ADC_SampleTime_239Cycles5)) +/** + * @} + */ + +/** @defgroup ADC_external_trigger_sources_for_injected_channels_conversion + * @{ + */ + +#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00002000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00003000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00004000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00005000) /*!< For ADC1 and ADC2 */ +#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((uint32_t)0x00006000) /*!< For ADC1 and ADC2 */ + +#define ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00000000) /*!< For ADC1, ADC2 and ADC3 */ +#define ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00001000) /*!< For ADC1, ADC2 and ADC3 */ +#define ADC_ExternalTrigInjecConv_None ((uint32_t)0x00007000) /*!< For ADC1, ADC2 and ADC3 */ + +#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00002000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x00003000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x00004000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x00005000) /*!< For ADC3 only */ +#define ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x00006000) /*!< For ADC3 only */ + +#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4)) +/** + * @} + */ + +/** @defgroup ADC_injected_channel_selection + * @{ + */ + +#define ADC_InjectedChannel_1 ((uint8_t)0x14) +#define ADC_InjectedChannel_2 ((uint8_t)0x18) +#define ADC_InjectedChannel_3 ((uint8_t)0x1C) +#define ADC_InjectedChannel_4 ((uint8_t)0x20) +#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \ + ((CHANNEL) == ADC_InjectedChannel_2) || \ + ((CHANNEL) == ADC_InjectedChannel_3) || \ + ((CHANNEL) == ADC_InjectedChannel_4)) +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_selection + * @{ + */ + +#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200) +#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200) +#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200) +#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000) +#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000) +#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000) +#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000) + +#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_None)) +/** + * @} + */ + +/** @defgroup ADC_interrupts_definition + * @{ + */ + +#define ADC_IT_EOC ((uint16_t)0x0220) +#define ADC_IT_AWD ((uint16_t)0x0140) +#define ADC_IT_JEOC ((uint16_t)0x0480) + +#define IS_ADC_IT(IT) ((((IT) & (uint16_t)0xF81F) == 0x00) && ((IT) != 0x00)) + +#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \ + ((IT) == ADC_IT_JEOC)) +/** + * @} + */ + +/** @defgroup ADC_flags_definition + * @{ + */ + +#define ADC_FLAG_AWD ((uint8_t)0x01) +#define ADC_FLAG_EOC ((uint8_t)0x02) +#define ADC_FLAG_JEOC ((uint8_t)0x04) +#define ADC_FLAG_JSTRT ((uint8_t)0x08) +#define ADC_FLAG_STRT ((uint8_t)0x10) +#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xE0) == 0x00) && ((FLAG) != 0x00)) +#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \ + ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \ + ((FLAG) == ADC_FLAG_STRT)) +/** + * @} + */ + +/** @defgroup ADC_thresholds + * @{ + */ + +#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF) + +/** + * @} + */ + +/** @defgroup ADC_injected_offset + * @{ + */ + +#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF) + +/** + * @} + */ + +/** @defgroup ADC_injected_length + * @{ + */ + +#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4)) + +/** + * @} + */ + +/** @defgroup ADC_injected_rank + * @{ + */ + +#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4)) + +/** + * @} + */ + + +/** @defgroup ADC_regular_length + * @{ + */ + +#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10)) +/** + * @} + */ + +/** @defgroup ADC_regular_rank + * @{ + */ + +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10)) + +/** + * @} + */ + +/** @defgroup ADC_regular_discontinuous_mode_number + * @{ + */ + +#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions + * @{ + */ + +void ADC_DeInit(ADC_TypeDef* ADCx); +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct); +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct); +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState); +void ADC_ResetCalibration(ADC_TypeDef* ADCx); +FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx); +void ADC_StartCalibration(ADC_TypeDef* ADCx); +FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx); +void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx); +void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number); +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx); +uint32_t ADC_GetDualModeConversionValue(void); +void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv); +void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx); +void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length); +void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset); +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel); +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog); +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, uint16_t LowThreshold); +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel); +void ADC_TempSensorVrefintCmd(FunctionalState NewState); +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT); +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_ADC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_bkp.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_bkp.h new file mode 100644 index 0000000..275c5e1 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_bkp.h @@ -0,0 +1,195 @@ +/** + ****************************************************************************** + * @file stm32f10x_bkp.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the BKP firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_BKP_H +#define __STM32F10x_BKP_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup BKP + * @{ + */ + +/** @defgroup BKP_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Exported_Constants + * @{ + */ + +/** @defgroup Tamper_Pin_active_level + * @{ + */ + +#define BKP_TamperPinLevel_High ((uint16_t)0x0000) +#define BKP_TamperPinLevel_Low ((uint16_t)0x0001) +#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \ + ((LEVEL) == BKP_TamperPinLevel_Low)) +/** + * @} + */ + +/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin + * @{ + */ + +#define BKP_RTCOutputSource_None ((uint16_t)0x0000) +#define BKP_RTCOutputSource_CalibClock ((uint16_t)0x0080) +#define BKP_RTCOutputSource_Alarm ((uint16_t)0x0100) +#define BKP_RTCOutputSource_Second ((uint16_t)0x0300) +#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \ + ((SOURCE) == BKP_RTCOutputSource_CalibClock) || \ + ((SOURCE) == BKP_RTCOutputSource_Alarm) || \ + ((SOURCE) == BKP_RTCOutputSource_Second)) +/** + * @} + */ + +/** @defgroup Data_Backup_Register + * @{ + */ + +#define BKP_DR1 ((uint16_t)0x0004) +#define BKP_DR2 ((uint16_t)0x0008) +#define BKP_DR3 ((uint16_t)0x000C) +#define BKP_DR4 ((uint16_t)0x0010) +#define BKP_DR5 ((uint16_t)0x0014) +#define BKP_DR6 ((uint16_t)0x0018) +#define BKP_DR7 ((uint16_t)0x001C) +#define BKP_DR8 ((uint16_t)0x0020) +#define BKP_DR9 ((uint16_t)0x0024) +#define BKP_DR10 ((uint16_t)0x0028) +#define BKP_DR11 ((uint16_t)0x0040) +#define BKP_DR12 ((uint16_t)0x0044) +#define BKP_DR13 ((uint16_t)0x0048) +#define BKP_DR14 ((uint16_t)0x004C) +#define BKP_DR15 ((uint16_t)0x0050) +#define BKP_DR16 ((uint16_t)0x0054) +#define BKP_DR17 ((uint16_t)0x0058) +#define BKP_DR18 ((uint16_t)0x005C) +#define BKP_DR19 ((uint16_t)0x0060) +#define BKP_DR20 ((uint16_t)0x0064) +#define BKP_DR21 ((uint16_t)0x0068) +#define BKP_DR22 ((uint16_t)0x006C) +#define BKP_DR23 ((uint16_t)0x0070) +#define BKP_DR24 ((uint16_t)0x0074) +#define BKP_DR25 ((uint16_t)0x0078) +#define BKP_DR26 ((uint16_t)0x007C) +#define BKP_DR27 ((uint16_t)0x0080) +#define BKP_DR28 ((uint16_t)0x0084) +#define BKP_DR29 ((uint16_t)0x0088) +#define BKP_DR30 ((uint16_t)0x008C) +#define BKP_DR31 ((uint16_t)0x0090) +#define BKP_DR32 ((uint16_t)0x0094) +#define BKP_DR33 ((uint16_t)0x0098) +#define BKP_DR34 ((uint16_t)0x009C) +#define BKP_DR35 ((uint16_t)0x00A0) +#define BKP_DR36 ((uint16_t)0x00A4) +#define BKP_DR37 ((uint16_t)0x00A8) +#define BKP_DR38 ((uint16_t)0x00AC) +#define BKP_DR39 ((uint16_t)0x00B0) +#define BKP_DR40 ((uint16_t)0x00B4) +#define BKP_DR41 ((uint16_t)0x00B8) +#define BKP_DR42 ((uint16_t)0x00BC) + +#define IS_BKP_DR(DR) (((DR) == BKP_DR1) || ((DR) == BKP_DR2) || ((DR) == BKP_DR3) || \ + ((DR) == BKP_DR4) || ((DR) == BKP_DR5) || ((DR) == BKP_DR6) || \ + ((DR) == BKP_DR7) || ((DR) == BKP_DR8) || ((DR) == BKP_DR9) || \ + ((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \ + ((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \ + ((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \ + ((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \ + ((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \ + ((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \ + ((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \ + ((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \ + ((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \ + ((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \ + ((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42)) + +#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup BKP_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Exported_Functions + * @{ + */ + +void BKP_DeInit(void); +void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel); +void BKP_TamperPinCmd(FunctionalState NewState); +void BKP_ITConfig(FunctionalState NewState); +void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource); +void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue); +void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data); +uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR); +FlagStatus BKP_GetFlagStatus(void); +void BKP_ClearFlag(void); +ITStatus BKP_GetITStatus(void); +void BKP_ClearITPendingBit(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_BKP_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_can.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_can.h new file mode 100644 index 0000000..d185aa2 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_can.h @@ -0,0 +1,697 @@ +/** + ****************************************************************************** + * @file stm32f10x_can.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the CAN firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CAN_H +#define __STM32F10x_CAN_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CAN + * @{ + */ + +/** @defgroup CAN_Exported_Types + * @{ + */ + +#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \ + ((PERIPH) == CAN2)) + +/** + * @brief CAN init structure definition + */ + +typedef struct +{ + uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum. + It ranges from 1 to 1024. */ + + uint8_t CAN_Mode; /*!< Specifies the CAN operating mode. + This parameter can be a value of + @ref CAN_operating_mode */ + + uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta + the CAN hardware is allowed to lengthen or + shorten a bit to perform resynchronization. + This parameter can be a value of + @ref CAN_synchronisation_jump_width */ + + uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit + Segment 1. This parameter can be a value of + @ref CAN_time_quantum_in_bit_segment_1 */ + + uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit + Segment 2. + This parameter can be a value of + @ref CAN_time_quantum_in_bit_segment_2 */ + + FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered + communication mode. This parameter can be set + either to ENABLE or DISABLE. */ + + FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off + management. This parameter can be set either + to ENABLE or DISABLE. */ + + FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode. + This parameter can be set either to ENABLE or + DISABLE. */ + + FunctionalState CAN_NART; /*!< Enable or disable the no-automatic + retransmission mode. This parameter can be + set either to ENABLE or DISABLE. */ + + FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode. + This parameter can be set either to ENABLE + or DISABLE. */ + + FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority. + This parameter can be set either to ENABLE + or DISABLE. */ +} CAN_InitTypeDef; + +/** + * @brief CAN filter init structure definition + */ + +typedef struct +{ + uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit + configuration, first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit + configuration, second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, + according to the mode (MSBs for a 32-bit configuration, + first one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, + according to the mode (LSBs for a 32-bit configuration, + second one for a 16-bit configuration). + This parameter can be a value between 0x0000 and 0xFFFF */ + + uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. + This parameter can be a value of @ref CAN_filter_FIFO */ + + uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */ + + uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized. + This parameter can be a value of @ref CAN_filter_mode */ + + uint8_t CAN_FilterScale; /*!< Specifies the filter scale. + This parameter can be a value of @ref CAN_filter_scale */ + + FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter. + This parameter can be set either to ENABLE or DISABLE. */ +} CAN_FilterInitTypeDef; + +/** + * @brief CAN Tx message structure definition + */ + +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /*!< Specifies the type of identifier for the message that + will be transmitted. This parameter can be a value + of @ref CAN_identifier_type */ + + uint8_t RTR; /*!< Specifies the type of frame for the message that will + be transmitted. This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /*!< Specifies the length of the frame that will be + transmitted. This parameter can be a value between + 0 to 8 */ + + uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 + to 0xFF. */ +} CanTxMsg; + +/** + * @brief CAN Rx message structure definition + */ + +typedef struct +{ + uint32_t StdId; /*!< Specifies the standard identifier. + This parameter can be a value between 0 to 0x7FF. */ + + uint32_t ExtId; /*!< Specifies the extended identifier. + This parameter can be a value between 0 to 0x1FFFFFFF. */ + + uint8_t IDE; /*!< Specifies the type of identifier for the message that + will be received. This parameter can be a value of + @ref CAN_identifier_type */ + + uint8_t RTR; /*!< Specifies the type of frame for the received message. + This parameter can be a value of + @ref CAN_remote_transmission_request */ + + uint8_t DLC; /*!< Specifies the length of the frame that will be received. + This parameter can be a value between 0 to 8 */ + + uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to + 0xFF. */ + + uint8_t FMI; /*!< Specifies the index of the filter the message stored in + the mailbox passes through. This parameter can be a + value between 0 to 0xFF */ +} CanRxMsg; + +/** + * @} + */ + +/** @defgroup CAN_Exported_Constants + * @{ + */ + +/** @defgroup CAN_sleep_constants + * @{ + */ + +#define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */ +#define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */ + +/** + * @} + */ + +/** @defgroup CAN_Mode + * @{ + */ + +#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */ +#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */ +#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */ +#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */ + +#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \ + ((MODE) == CAN_Mode_LoopBack)|| \ + ((MODE) == CAN_Mode_Silent) || \ + ((MODE) == CAN_Mode_Silent_LoopBack)) +/** + * @} + */ + + +/** + * @defgroup CAN_Operating_Mode + * @{ + */ +#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */ +#define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */ +#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */ + + +#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\ + ((MODE) == CAN_OperatingMode_Normal)|| \ + ((MODE) == CAN_OperatingMode_Sleep)) +/** + * @} + */ + +/** + * @defgroup CAN_Mode_Status + * @{ + */ + +#define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */ +#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */ + + +/** + * @} + */ + +/** @defgroup CAN_synchronisation_jump_width + * @{ + */ + +#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */ + +#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \ + ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq)) +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_1 + * @{ + */ + +#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */ +#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */ +#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */ +#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */ +#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */ +#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */ +#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */ +#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */ +#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */ +#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */ +#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */ +#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */ +#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */ + +#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq) +/** + * @} + */ + +/** @defgroup CAN_time_quantum_in_bit_segment_2 + * @{ + */ + +#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */ +#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */ +#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */ +#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */ +#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */ +#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */ +#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */ +#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */ + +#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq) + +/** + * @} + */ + +/** @defgroup CAN_clock_prescaler + * @{ + */ + +#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) + +/** + * @} + */ + +/** @defgroup CAN_filter_number + * @{ + */ +#ifndef STM32F10X_CL + #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13) +#else + #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup CAN_filter_mode + * @{ + */ + +#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */ +#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */ + +#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \ + ((MODE) == CAN_FilterMode_IdList)) +/** + * @} + */ + +/** @defgroup CAN_filter_scale + * @{ + */ + +#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */ +#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */ + +#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \ + ((SCALE) == CAN_FilterScale_32bit)) + +/** + * @} + */ + +/** @defgroup CAN_filter_FIFO + * @{ + */ + +#define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ +#define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ +#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \ + ((FIFO) == CAN_FilterFIFO1)) +/** + * @} + */ + +/** @defgroup Start_bank_filter_for_slave_CAN + * @{ + */ +#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27)) +/** + * @} + */ + +/** @defgroup CAN_Tx + * @{ + */ + +#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) +#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF)) +#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF)) +#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) + +/** + * @} + */ + +/** @defgroup CAN_identifier_type + * @{ + */ + +#define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */ +#define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */ +#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \ + ((IDTYPE) == CAN_Id_Extended)) +/** + * @} + */ + +/** @defgroup CAN_remote_transmission_request + * @{ + */ + +#define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */ +#define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */ +#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote)) + +/** + * @} + */ + +/** @defgroup CAN_transmit_constants + * @{ + */ + +#define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */ +#define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */ +#define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */ +#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide an empty mailbox */ + +/** + * @} + */ + +/** @defgroup CAN_receive_FIFO_number_constants + * @{ + */ + +#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ +#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */ + +#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) + +/** + * @} + */ + +/** @defgroup CAN_sleep_constants + * @{ + */ + +#define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */ +#define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */ + +/** + * @} + */ + +/** @defgroup CAN_wake_up_constants + * @{ + */ + +#define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */ +#define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */ + +/** + * @} + */ + +/** + * @defgroup CAN_Error_Code_constants + * @{ + */ + +#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */ +#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */ +#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */ +#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */ +#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */ +#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */ +#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */ +#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */ + + +/** + * @} + */ + +/** @defgroup CAN_flags + * @{ + */ +/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() + and CAN_ClearFlag() functions. */ +/* If the flag is 0x1XXXXXXX, it means that it can only be used with CAN_GetFlagStatus() function. */ + +/* Transmit Flags */ +#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */ +#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */ +#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */ + +/* Receive Flags */ +#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */ +#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */ +#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */ +#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */ +#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */ +#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */ + +/* Operating Mode Flags */ +#define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */ +#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */ +/* Note: When SLAK intterupt is disabled (SLKIE=0), no polling on SLAKI is possible. + In this case the SLAK bit can be polled.*/ + +/* Error Flags */ +#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */ +#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */ +#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */ +#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */ + +#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \ + ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \ + ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \ + ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \ + ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \ + ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \ + ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \ + ((FLAG) == CAN_FLAG_SLAK )) + +#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \ + ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \ + ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\ + ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \ + ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK)) +/** + * @} + */ + + +/** @defgroup CAN_interrupts + * @{ + */ + + + +#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/ + +/* Receive Interrupts */ +#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/ +#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/ +#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/ +#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/ +#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/ +#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/ + +/* Operating Mode Interrupts */ +#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/ +#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/ + +/* Error Interrupts */ +#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/ +#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/ +#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/ +#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/ +#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/ + +/* Flags named as Interrupts : kept only for FW compatibility */ +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME + + +#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\ + ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\ + ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\ + ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ + ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ + ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ + ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) + +#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\ + ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\ + ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\ + ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ + ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ + ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) + +/** + * @} + */ + +/** @defgroup CAN_Legacy + * @{ + */ +#define CANINITFAILED CAN_InitStatus_Failed +#define CANINITOK CAN_InitStatus_Success +#define CAN_FilterFIFO0 CAN_Filter_FIFO0 +#define CAN_FilterFIFO1 CAN_Filter_FIFO1 +#define CAN_ID_STD CAN_Id_Standard +#define CAN_ID_EXT CAN_Id_Extended +#define CAN_RTR_DATA CAN_RTR_Data +#define CAN_RTR_REMOTE CAN_RTR_Remote +#define CANTXFAILE CAN_TxStatus_Failed +#define CANTXOK CAN_TxStatus_Ok +#define CANTXPENDING CAN_TxStatus_Pending +#define CAN_NO_MB CAN_TxStatus_NoMailBox +#define CANSLEEPFAILED CAN_Sleep_Failed +#define CANSLEEPOK CAN_Sleep_Ok +#define CANWAKEUPFAILED CAN_WakeUp_Failed +#define CANWAKEUPOK CAN_WakeUp_Ok + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup CAN_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Exported_Functions + * @{ + */ +/* Function used to set the CAN configuration to the default reset state *****/ +void CAN_DeInit(CAN_TypeDef* CANx); + +/* Initialization and Configuration functions *********************************/ +uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct); +void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct); +void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct); +void CAN_SlaveStartBank(uint8_t CAN_BankNumber); +void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState); +void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState); + +/* Transmit functions *********************************************************/ +uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage); +uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox); +void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox); + +/* Receive functions **********************************************************/ +void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage); +void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber); +uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber); + + +/* Operation modes functions **************************************************/ +uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode); +uint8_t CAN_Sleep(CAN_TypeDef* CANx); +uint8_t CAN_WakeUp(CAN_TypeDef* CANx); + +/* Error management functions *************************************************/ +uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx); +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx); +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx); + +/* Interrupts and flags management functions **********************************/ +void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState); +FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG); +void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG); +ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT); +void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_CAN_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_cec.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_cec.h new file mode 100644 index 0000000..7ce6896 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_cec.h @@ -0,0 +1,210 @@ +/** + ****************************************************************************** + * @file stm32f10x_cec.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the CEC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CEC_H +#define __STM32F10x_CEC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CEC + * @{ + */ + + +/** @defgroup CEC_Exported_Types + * @{ + */ + +/** + * @brief CEC Init structure definition + */ +typedef struct +{ + uint16_t CEC_BitTimingMode; /*!< Configures the CEC Bit Timing Error Mode. + This parameter can be a value of @ref CEC_BitTiming_Mode */ + uint16_t CEC_BitPeriodMode; /*!< Configures the CEC Bit Period Error Mode. + This parameter can be a value of @ref CEC_BitPeriod_Mode */ +}CEC_InitTypeDef; + +/** + * @} + */ + +/** @defgroup CEC_Exported_Constants + * @{ + */ + +/** @defgroup CEC_BitTiming_Mode + * @{ + */ +#define CEC_BitTimingStdMode ((uint16_t)0x00) /*!< Bit timing error Standard Mode */ +#define CEC_BitTimingErrFreeMode CEC_CFGR_BTEM /*!< Bit timing error Free Mode */ + +#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BitTimingStdMode) || \ + ((MODE) == CEC_BitTimingErrFreeMode)) +/** + * @} + */ + +/** @defgroup CEC_BitPeriod_Mode + * @{ + */ +#define CEC_BitPeriodStdMode ((uint16_t)0x00) /*!< Bit period error Standard Mode */ +#define CEC_BitPeriodFlexibleMode CEC_CFGR_BPEM /*!< Bit period error Flexible Mode */ + +#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BitPeriodStdMode) || \ + ((MODE) == CEC_BitPeriodFlexibleMode)) +/** + * @} + */ + + +/** @defgroup CEC_interrupts_definition + * @{ + */ +#define CEC_IT_TERR CEC_CSR_TERR +#define CEC_IT_TBTRF CEC_CSR_TBTRF +#define CEC_IT_RERR CEC_CSR_RERR +#define CEC_IT_RBTF CEC_CSR_RBTF +#define IS_CEC_GET_IT(IT) (((IT) == CEC_IT_TERR) || ((IT) == CEC_IT_TBTRF) || \ + ((IT) == CEC_IT_RERR) || ((IT) == CEC_IT_RBTF)) +/** + * @} + */ + + +/** @defgroup CEC_Own_Address + * @{ + */ +#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10) +/** + * @} + */ + +/** @defgroup CEC_Prescaler + * @{ + */ +#define IS_CEC_PRESCALER(PRESCALER) ((PRESCALER) <= 0x3FFF) + +/** + * @} + */ + +/** @defgroup CEC_flags_definition + * @{ + */ + +/** + * @brief ESR register flags + */ +#define CEC_FLAG_BTE ((uint32_t)0x10010000) +#define CEC_FLAG_BPE ((uint32_t)0x10020000) +#define CEC_FLAG_RBTFE ((uint32_t)0x10040000) +#define CEC_FLAG_SBE ((uint32_t)0x10080000) +#define CEC_FLAG_ACKE ((uint32_t)0x10100000) +#define CEC_FLAG_LINE ((uint32_t)0x10200000) +#define CEC_FLAG_TBTFE ((uint32_t)0x10400000) + +/** + * @brief CSR register flags + */ +#define CEC_FLAG_TEOM ((uint32_t)0x00000002) +#define CEC_FLAG_TERR ((uint32_t)0x00000004) +#define CEC_FLAG_TBTRF ((uint32_t)0x00000008) +#define CEC_FLAG_RSOM ((uint32_t)0x00000010) +#define CEC_FLAG_REOM ((uint32_t)0x00000020) +#define CEC_FLAG_RERR ((uint32_t)0x00000040) +#define CEC_FLAG_RBTF ((uint32_t)0x00000080) + +#define IS_CEC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFF03) == 0x00) && ((FLAG) != 0x00)) + +#define IS_CEC_GET_FLAG(FLAG) (((FLAG) == CEC_FLAG_BTE) || ((FLAG) == CEC_FLAG_BPE) || \ + ((FLAG) == CEC_FLAG_RBTFE) || ((FLAG)== CEC_FLAG_SBE) || \ + ((FLAG) == CEC_FLAG_ACKE) || ((FLAG) == CEC_FLAG_LINE) || \ + ((FLAG) == CEC_FLAG_TBTFE) || ((FLAG) == CEC_FLAG_TEOM) || \ + ((FLAG) == CEC_FLAG_TERR) || ((FLAG) == CEC_FLAG_TBTRF) || \ + ((FLAG) == CEC_FLAG_RSOM) || ((FLAG) == CEC_FLAG_REOM) || \ + ((FLAG) == CEC_FLAG_RERR) || ((FLAG) == CEC_FLAG_RBTF)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup CEC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CEC_Exported_Functions + * @{ + */ +void CEC_DeInit(void); +void CEC_Init(CEC_InitTypeDef* CEC_InitStruct); +void CEC_Cmd(FunctionalState NewState); +void CEC_ITConfig(FunctionalState NewState); +void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress); +void CEC_SetPrescaler(uint16_t CEC_Prescaler); +void CEC_SendDataByte(uint8_t Data); +uint8_t CEC_ReceiveDataByte(void); +void CEC_StartOfMessage(void); +void CEC_EndOfMessageCmd(FunctionalState NewState); +FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG); +void CEC_ClearFlag(uint32_t CEC_FLAG); +ITStatus CEC_GetITStatus(uint8_t CEC_IT); +void CEC_ClearITPendingBit(uint16_t CEC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_CEC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_crc.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_crc.h new file mode 100644 index 0000000..3362fca --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_crc.h @@ -0,0 +1,94 @@ +/** + ****************************************************************************** + * @file stm32f10x_crc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the CRC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CRC_H +#define __STM32F10x_CRC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup CRC + * @{ + */ + +/** @defgroup CRC_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Exported_Constants + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions + * @{ + */ + +void CRC_ResetDR(void); +uint32_t CRC_CalcCRC(uint32_t Data); +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength); +uint32_t CRC_GetCRC(void); +void CRC_SetIDRegister(uint8_t IDValue); +uint8_t CRC_GetIDRegister(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_CRC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_dac.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_dac.h new file mode 100644 index 0000000..174773c --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_dac.h @@ -0,0 +1,317 @@ +/** + ****************************************************************************** + * @file stm32f10x_dac.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the DAC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_DAC_H +#define __STM32F10x_DAC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DAC + * @{ + */ + +/** @defgroup DAC_Exported_Types + * @{ + */ + +/** + * @brief DAC Init structure definition + */ + +typedef struct +{ + uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. + This parameter can be a value of @ref DAC_trigger_selection */ + + uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves + are generated, or whether no wave is generated. + This parameter can be a value of @ref DAC_wave_generation */ + + uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or + the maximum amplitude triangle generation for the DAC channel. + This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */ + + uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. + This parameter can be a value of @ref DAC_output_buffer */ +}DAC_InitTypeDef; + +/** + * @} + */ + +/** @defgroup DAC_Exported_Constants + * @{ + */ + +/** @defgroup DAC_trigger_selection + * @{ + */ + +#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register + has been loaded, and not by external trigger */ +#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T8_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel + only in High-density devices*/ +#define DAC_Trigger_T3_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel + only in Connectivity line, Medium-density and Low-density Value Line devices */ +#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T5_TRGO ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T15_TRGO ((uint32_t)0x0000001C) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel + only in Medium-density and Low-density Value Line devices*/ +#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_T4_TRGO ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ +#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */ + +#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \ + ((TRIGGER) == DAC_Trigger_T6_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T8_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T7_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T5_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T2_TRGO) || \ + ((TRIGGER) == DAC_Trigger_T4_TRGO) || \ + ((TRIGGER) == DAC_Trigger_Ext_IT9) || \ + ((TRIGGER) == DAC_Trigger_Software)) + +/** + * @} + */ + +/** @defgroup DAC_wave_generation + * @{ + */ + +#define DAC_WaveGeneration_None ((uint32_t)0x00000000) +#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040) +#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080) +#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \ + ((WAVE) == DAC_WaveGeneration_Noise) || \ + ((WAVE) == DAC_WaveGeneration_Triangle)) +/** + * @} + */ + +/** @defgroup DAC_lfsrunmask_triangleamplitude + * @{ + */ + +#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ +#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ +#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ +#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */ +#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */ +#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */ +#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */ +#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */ +#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */ +#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */ +#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */ +#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */ +#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */ +#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */ +#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */ + +#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \ + ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \ + ((VALUE) == DAC_TriangleAmplitude_1) || \ + ((VALUE) == DAC_TriangleAmplitude_3) || \ + ((VALUE) == DAC_TriangleAmplitude_7) || \ + ((VALUE) == DAC_TriangleAmplitude_15) || \ + ((VALUE) == DAC_TriangleAmplitude_31) || \ + ((VALUE) == DAC_TriangleAmplitude_63) || \ + ((VALUE) == DAC_TriangleAmplitude_127) || \ + ((VALUE) == DAC_TriangleAmplitude_255) || \ + ((VALUE) == DAC_TriangleAmplitude_511) || \ + ((VALUE) == DAC_TriangleAmplitude_1023) || \ + ((VALUE) == DAC_TriangleAmplitude_2047) || \ + ((VALUE) == DAC_TriangleAmplitude_4095)) +/** + * @} + */ + +/** @defgroup DAC_output_buffer + * @{ + */ + +#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000) +#define DAC_OutputBuffer_Disable ((uint32_t)0x00000002) +#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \ + ((STATE) == DAC_OutputBuffer_Disable)) +/** + * @} + */ + +/** @defgroup DAC_Channel_selection + * @{ + */ + +#define DAC_Channel_1 ((uint32_t)0x00000000) +#define DAC_Channel_2 ((uint32_t)0x00000010) +#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \ + ((CHANNEL) == DAC_Channel_2)) +/** + * @} + */ + +/** @defgroup DAC_data_alignment + * @{ + */ + +#define DAC_Align_12b_R ((uint32_t)0x00000000) +#define DAC_Align_12b_L ((uint32_t)0x00000004) +#define DAC_Align_8b_R ((uint32_t)0x00000008) +#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \ + ((ALIGN) == DAC_Align_12b_L) || \ + ((ALIGN) == DAC_Align_8b_R)) +/** + * @} + */ + +/** @defgroup DAC_wave_generation + * @{ + */ + +#define DAC_Wave_Noise ((uint32_t)0x00000040) +#define DAC_Wave_Triangle ((uint32_t)0x00000080) +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \ + ((WAVE) == DAC_Wave_Triangle)) +/** + * @} + */ + +/** @defgroup DAC_data + * @{ + */ + +#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) +/** + * @} + */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/** @defgroup DAC_interrupts_definition + * @{ + */ + +#define DAC_IT_DMAUDR ((uint32_t)0x00002000) +#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR)) + +/** + * @} + */ + +/** @defgroup DAC_flags_definition + * @{ + */ + +#define DAC_FLAG_DMAUDR ((uint32_t)0x00002000) +#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR)) + +/** + * @} + */ +#endif + +/** + * @} + */ + +/** @defgroup DAC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions + * @{ + */ + +void DAC_DeInit(void); +void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct); +void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct); +void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState); +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState); +#endif +void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState); +void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState); +void DAC_DualSoftwareTriggerCmd(FunctionalState NewState); +void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState); +void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data); +void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data); +void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1); +uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel); +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG); +void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG); +ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT); +void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_DAC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_dbgmcu.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_dbgmcu.h new file mode 100644 index 0000000..89ceb9a --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_dbgmcu.h @@ -0,0 +1,119 @@ +/** + ****************************************************************************** + * @file stm32f10x_dbgmcu.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the DBGMCU + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_DBGMCU_H +#define __STM32F10x_DBGMCU_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DBGMCU + * @{ + */ + +/** @defgroup DBGMCU_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Exported_Constants + * @{ + */ + +#define DBGMCU_SLEEP ((uint32_t)0x00000001) +#define DBGMCU_STOP ((uint32_t)0x00000002) +#define DBGMCU_STANDBY ((uint32_t)0x00000004) +#define DBGMCU_IWDG_STOP ((uint32_t)0x00000100) +#define DBGMCU_WWDG_STOP ((uint32_t)0x00000200) +#define DBGMCU_TIM1_STOP ((uint32_t)0x00000400) +#define DBGMCU_TIM2_STOP ((uint32_t)0x00000800) +#define DBGMCU_TIM3_STOP ((uint32_t)0x00001000) +#define DBGMCU_TIM4_STOP ((uint32_t)0x00002000) +#define DBGMCU_CAN1_STOP ((uint32_t)0x00004000) +#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000) +#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000) +#define DBGMCU_TIM8_STOP ((uint32_t)0x00020000) +#define DBGMCU_TIM5_STOP ((uint32_t)0x00040000) +#define DBGMCU_TIM6_STOP ((uint32_t)0x00080000) +#define DBGMCU_TIM7_STOP ((uint32_t)0x00100000) +#define DBGMCU_CAN2_STOP ((uint32_t)0x00200000) +#define DBGMCU_TIM15_STOP ((uint32_t)0x00400000) +#define DBGMCU_TIM16_STOP ((uint32_t)0x00800000) +#define DBGMCU_TIM17_STOP ((uint32_t)0x01000000) +#define DBGMCU_TIM12_STOP ((uint32_t)0x02000000) +#define DBGMCU_TIM13_STOP ((uint32_t)0x04000000) +#define DBGMCU_TIM14_STOP ((uint32_t)0x08000000) +#define DBGMCU_TIM9_STOP ((uint32_t)0x10000000) +#define DBGMCU_TIM10_STOP ((uint32_t)0x20000000) +#define DBGMCU_TIM11_STOP ((uint32_t)0x40000000) + +#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0x800000F8) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup DBGMCU_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Exported_Functions + * @{ + */ + +uint32_t DBGMCU_GetREVID(void); +uint32_t DBGMCU_GetDEVID(void); +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_DBGMCU_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_dma.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_dma.h new file mode 100644 index 0000000..14275fe --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_dma.h @@ -0,0 +1,439 @@ +/** + ****************************************************************************** + * @file stm32f10x_dma.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the DMA firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_DMA_H +#define __STM32F10x_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/** @defgroup DMA_Exported_Types + * @{ + */ + +/** + * @brief DMA Init structure definition + */ + +typedef struct +{ + uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx. */ + + uint32_t DMA_MemoryBaseAddr; /*!< Specifies the memory base address for DMAy Channelx. */ + + uint32_t DMA_DIR; /*!< Specifies if the peripheral is the source or destination. + This parameter can be a value of @ref DMA_data_transfer_direction */ + + uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Channel. + The data unit is equal to the configuration set in DMA_PeripheralDataSize + or DMA_MemoryDataSize members depending in the transfer direction. */ + + uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register is incremented or not. + This parameter can be a value of @ref DMA_peripheral_incremented_mode */ + + uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register is incremented or not. + This parameter can be a value of @ref DMA_memory_incremented_mode */ + + uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_peripheral_data_size */ + + uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_memory_data_size */ + + uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_circular_normal_mode. + @note: The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_priority_level */ + + uint32_t DMA_M2M; /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer. + This parameter can be a value of @ref DMA_memory_to_memory */ +}DMA_InitTypeDef; + +/** + * @} + */ + +/** @defgroup DMA_Exported_Constants + * @{ + */ + +#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \ + ((PERIPH) == DMA1_Channel2) || \ + ((PERIPH) == DMA1_Channel3) || \ + ((PERIPH) == DMA1_Channel4) || \ + ((PERIPH) == DMA1_Channel5) || \ + ((PERIPH) == DMA1_Channel6) || \ + ((PERIPH) == DMA1_Channel7) || \ + ((PERIPH) == DMA2_Channel1) || \ + ((PERIPH) == DMA2_Channel2) || \ + ((PERIPH) == DMA2_Channel3) || \ + ((PERIPH) == DMA2_Channel4) || \ + ((PERIPH) == DMA2_Channel5)) + +/** @defgroup DMA_data_transfer_direction + * @{ + */ + +#define DMA_DIR_PeripheralDST ((uint32_t)0x00000010) +#define DMA_DIR_PeripheralSRC ((uint32_t)0x00000000) +#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \ + ((DIR) == DMA_DIR_PeripheralSRC)) +/** + * @} + */ + +/** @defgroup DMA_peripheral_incremented_mode + * @{ + */ + +#define DMA_PeripheralInc_Enable ((uint32_t)0x00000040) +#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000) +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \ + ((STATE) == DMA_PeripheralInc_Disable)) +/** + * @} + */ + +/** @defgroup DMA_memory_incremented_mode + * @{ + */ + +#define DMA_MemoryInc_Enable ((uint32_t)0x00000080) +#define DMA_MemoryInc_Disable ((uint32_t)0x00000000) +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \ + ((STATE) == DMA_MemoryInc_Disable)) +/** + * @} + */ + +/** @defgroup DMA_peripheral_data_size + * @{ + */ + +#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000) +#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000100) +#define DMA_PeripheralDataSize_Word ((uint32_t)0x00000200) +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \ + ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \ + ((SIZE) == DMA_PeripheralDataSize_Word)) +/** + * @} + */ + +/** @defgroup DMA_memory_data_size + * @{ + */ + +#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000) +#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00000400) +#define DMA_MemoryDataSize_Word ((uint32_t)0x00000800) +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \ + ((SIZE) == DMA_MemoryDataSize_HalfWord) || \ + ((SIZE) == DMA_MemoryDataSize_Word)) +/** + * @} + */ + +/** @defgroup DMA_circular_normal_mode + * @{ + */ + +#define DMA_Mode_Circular ((uint32_t)0x00000020) +#define DMA_Mode_Normal ((uint32_t)0x00000000) +#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal)) +/** + * @} + */ + +/** @defgroup DMA_priority_level + * @{ + */ + +#define DMA_Priority_VeryHigh ((uint32_t)0x00003000) +#define DMA_Priority_High ((uint32_t)0x00002000) +#define DMA_Priority_Medium ((uint32_t)0x00001000) +#define DMA_Priority_Low ((uint32_t)0x00000000) +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \ + ((PRIORITY) == DMA_Priority_High) || \ + ((PRIORITY) == DMA_Priority_Medium) || \ + ((PRIORITY) == DMA_Priority_Low)) +/** + * @} + */ + +/** @defgroup DMA_memory_to_memory + * @{ + */ + +#define DMA_M2M_Enable ((uint32_t)0x00004000) +#define DMA_M2M_Disable ((uint32_t)0x00000000) +#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable)) + +/** + * @} + */ + +/** @defgroup DMA_interrupts_definition + * @{ + */ + +#define DMA_IT_TC ((uint32_t)0x00000002) +#define DMA_IT_HT ((uint32_t)0x00000004) +#define DMA_IT_TE ((uint32_t)0x00000008) +#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00)) + +#define DMA1_IT_GL1 ((uint32_t)0x00000001) +#define DMA1_IT_TC1 ((uint32_t)0x00000002) +#define DMA1_IT_HT1 ((uint32_t)0x00000004) +#define DMA1_IT_TE1 ((uint32_t)0x00000008) +#define DMA1_IT_GL2 ((uint32_t)0x00000010) +#define DMA1_IT_TC2 ((uint32_t)0x00000020) +#define DMA1_IT_HT2 ((uint32_t)0x00000040) +#define DMA1_IT_TE2 ((uint32_t)0x00000080) +#define DMA1_IT_GL3 ((uint32_t)0x00000100) +#define DMA1_IT_TC3 ((uint32_t)0x00000200) +#define DMA1_IT_HT3 ((uint32_t)0x00000400) +#define DMA1_IT_TE3 ((uint32_t)0x00000800) +#define DMA1_IT_GL4 ((uint32_t)0x00001000) +#define DMA1_IT_TC4 ((uint32_t)0x00002000) +#define DMA1_IT_HT4 ((uint32_t)0x00004000) +#define DMA1_IT_TE4 ((uint32_t)0x00008000) +#define DMA1_IT_GL5 ((uint32_t)0x00010000) +#define DMA1_IT_TC5 ((uint32_t)0x00020000) +#define DMA1_IT_HT5 ((uint32_t)0x00040000) +#define DMA1_IT_TE5 ((uint32_t)0x00080000) +#define DMA1_IT_GL6 ((uint32_t)0x00100000) +#define DMA1_IT_TC6 ((uint32_t)0x00200000) +#define DMA1_IT_HT6 ((uint32_t)0x00400000) +#define DMA1_IT_TE6 ((uint32_t)0x00800000) +#define DMA1_IT_GL7 ((uint32_t)0x01000000) +#define DMA1_IT_TC7 ((uint32_t)0x02000000) +#define DMA1_IT_HT7 ((uint32_t)0x04000000) +#define DMA1_IT_TE7 ((uint32_t)0x08000000) + +#define DMA2_IT_GL1 ((uint32_t)0x10000001) +#define DMA2_IT_TC1 ((uint32_t)0x10000002) +#define DMA2_IT_HT1 ((uint32_t)0x10000004) +#define DMA2_IT_TE1 ((uint32_t)0x10000008) +#define DMA2_IT_GL2 ((uint32_t)0x10000010) +#define DMA2_IT_TC2 ((uint32_t)0x10000020) +#define DMA2_IT_HT2 ((uint32_t)0x10000040) +#define DMA2_IT_TE2 ((uint32_t)0x10000080) +#define DMA2_IT_GL3 ((uint32_t)0x10000100) +#define DMA2_IT_TC3 ((uint32_t)0x10000200) +#define DMA2_IT_HT3 ((uint32_t)0x10000400) +#define DMA2_IT_TE3 ((uint32_t)0x10000800) +#define DMA2_IT_GL4 ((uint32_t)0x10001000) +#define DMA2_IT_TC4 ((uint32_t)0x10002000) +#define DMA2_IT_HT4 ((uint32_t)0x10004000) +#define DMA2_IT_TE4 ((uint32_t)0x10008000) +#define DMA2_IT_GL5 ((uint32_t)0x10010000) +#define DMA2_IT_TC5 ((uint32_t)0x10020000) +#define DMA2_IT_HT5 ((uint32_t)0x10040000) +#define DMA2_IT_TE5 ((uint32_t)0x10080000) + +#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00)) + +#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \ + ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \ + ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \ + ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \ + ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \ + ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \ + ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \ + ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \ + ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \ + ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \ + ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \ + ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \ + ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \ + ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \ + ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \ + ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \ + ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \ + ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \ + ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \ + ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \ + ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \ + ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \ + ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \ + ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5)) + +/** + * @} + */ + +/** @defgroup DMA_flags_definition + * @{ + */ +#define DMA1_FLAG_GL1 ((uint32_t)0x00000001) +#define DMA1_FLAG_TC1 ((uint32_t)0x00000002) +#define DMA1_FLAG_HT1 ((uint32_t)0x00000004) +#define DMA1_FLAG_TE1 ((uint32_t)0x00000008) +#define DMA1_FLAG_GL2 ((uint32_t)0x00000010) +#define DMA1_FLAG_TC2 ((uint32_t)0x00000020) +#define DMA1_FLAG_HT2 ((uint32_t)0x00000040) +#define DMA1_FLAG_TE2 ((uint32_t)0x00000080) +#define DMA1_FLAG_GL3 ((uint32_t)0x00000100) +#define DMA1_FLAG_TC3 ((uint32_t)0x00000200) +#define DMA1_FLAG_HT3 ((uint32_t)0x00000400) +#define DMA1_FLAG_TE3 ((uint32_t)0x00000800) +#define DMA1_FLAG_GL4 ((uint32_t)0x00001000) +#define DMA1_FLAG_TC4 ((uint32_t)0x00002000) +#define DMA1_FLAG_HT4 ((uint32_t)0x00004000) +#define DMA1_FLAG_TE4 ((uint32_t)0x00008000) +#define DMA1_FLAG_GL5 ((uint32_t)0x00010000) +#define DMA1_FLAG_TC5 ((uint32_t)0x00020000) +#define DMA1_FLAG_HT5 ((uint32_t)0x00040000) +#define DMA1_FLAG_TE5 ((uint32_t)0x00080000) +#define DMA1_FLAG_GL6 ((uint32_t)0x00100000) +#define DMA1_FLAG_TC6 ((uint32_t)0x00200000) +#define DMA1_FLAG_HT6 ((uint32_t)0x00400000) +#define DMA1_FLAG_TE6 ((uint32_t)0x00800000) +#define DMA1_FLAG_GL7 ((uint32_t)0x01000000) +#define DMA1_FLAG_TC7 ((uint32_t)0x02000000) +#define DMA1_FLAG_HT7 ((uint32_t)0x04000000) +#define DMA1_FLAG_TE7 ((uint32_t)0x08000000) + +#define DMA2_FLAG_GL1 ((uint32_t)0x10000001) +#define DMA2_FLAG_TC1 ((uint32_t)0x10000002) +#define DMA2_FLAG_HT1 ((uint32_t)0x10000004) +#define DMA2_FLAG_TE1 ((uint32_t)0x10000008) +#define DMA2_FLAG_GL2 ((uint32_t)0x10000010) +#define DMA2_FLAG_TC2 ((uint32_t)0x10000020) +#define DMA2_FLAG_HT2 ((uint32_t)0x10000040) +#define DMA2_FLAG_TE2 ((uint32_t)0x10000080) +#define DMA2_FLAG_GL3 ((uint32_t)0x10000100) +#define DMA2_FLAG_TC3 ((uint32_t)0x10000200) +#define DMA2_FLAG_HT3 ((uint32_t)0x10000400) +#define DMA2_FLAG_TE3 ((uint32_t)0x10000800) +#define DMA2_FLAG_GL4 ((uint32_t)0x10001000) +#define DMA2_FLAG_TC4 ((uint32_t)0x10002000) +#define DMA2_FLAG_HT4 ((uint32_t)0x10004000) +#define DMA2_FLAG_TE4 ((uint32_t)0x10008000) +#define DMA2_FLAG_GL5 ((uint32_t)0x10010000) +#define DMA2_FLAG_TC5 ((uint32_t)0x10020000) +#define DMA2_FLAG_HT5 ((uint32_t)0x10040000) +#define DMA2_FLAG_TE5 ((uint32_t)0x10080000) + +#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00)) + +#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \ + ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \ + ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \ + ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \ + ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \ + ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \ + ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \ + ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \ + ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \ + ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \ + ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \ + ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \ + ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \ + ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \ + ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \ + ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \ + ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \ + ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \ + ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \ + ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \ + ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \ + ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \ + ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \ + ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5)) +/** + * @} + */ + +/** @defgroup DMA_Buffer_Size + * @{ + */ + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup DMA_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions + * @{ + */ + +void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx); +void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct); +void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct); +void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState); +void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState); +void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber); +uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx); +FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG); +void DMA_ClearFlag(uint32_t DMAy_FLAG); +ITStatus DMA_GetITStatus(uint32_t DMAy_IT); +void DMA_ClearITPendingBit(uint32_t DMAy_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_DMA_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_exti.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_exti.h new file mode 100644 index 0000000..bb9d7f6 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_exti.h @@ -0,0 +1,184 @@ +/** + ****************************************************************************** + * @file stm32f10x_exti.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the EXTI firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_EXTI_H +#define __STM32F10x_EXTI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ + +/** @defgroup EXTI_Exported_Types + * @{ + */ + +/** + * @brief EXTI mode enumeration + */ + +typedef enum +{ + EXTI_Mode_Interrupt = 0x00, + EXTI_Mode_Event = 0x04 +}EXTIMode_TypeDef; + +#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event)) + +/** + * @brief EXTI Trigger enumeration + */ + +typedef enum +{ + EXTI_Trigger_Rising = 0x08, + EXTI_Trigger_Falling = 0x0C, + EXTI_Trigger_Rising_Falling = 0x10 +}EXTITrigger_TypeDef; + +#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \ + ((TRIGGER) == EXTI_Trigger_Falling) || \ + ((TRIGGER) == EXTI_Trigger_Rising_Falling)) +/** + * @brief EXTI Init Structure definition + */ + +typedef struct +{ + uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled. + This parameter can be any combination of @ref EXTI_Lines */ + + EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTIMode_TypeDef */ + + EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTIMode_TypeDef */ + + FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ +}EXTI_InitTypeDef; + +/** + * @} + */ + +/** @defgroup EXTI_Exported_Constants + * @{ + */ + +/** @defgroup EXTI_Lines + * @{ + */ + +#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */ +#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */ +#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */ +#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */ +#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */ +#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */ +#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */ +#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */ +#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */ +#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */ +#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */ +#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */ +#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */ +#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */ +#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */ +#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */ +#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */ +#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */ +#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB Device/USB OTG FS + Wakeup from suspend event */ +#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ + +#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFFF00000) == 0x00) && ((LINE) != (uint16_t)0x00)) +#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \ + ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \ + ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \ + ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \ + ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \ + ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \ + ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \ + ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \ + ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \ + ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19)) + + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup EXTI_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions + * @{ + */ + +void EXTI_DeInit(void); +void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct); +void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct); +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line); +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line); +void EXTI_ClearFlag(uint32_t EXTI_Line); +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line); +void EXTI_ClearITPendingBit(uint32_t EXTI_Line); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_EXTI_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_flash.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_flash.h new file mode 100644 index 0000000..63720de --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_flash.h @@ -0,0 +1,426 @@ +/** + ****************************************************************************** + * @file stm32f10x_flash.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the FLASH + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_FLASH_H +#define __STM32F10x_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/** @defgroup FLASH_Exported_Types + * @{ + */ + +/** + * @brief FLASH Status + */ + +typedef enum +{ + FLASH_BUSY = 1, + FLASH_ERROR_PG, + FLASH_ERROR_WRP, + FLASH_COMPLETE, + FLASH_TIMEOUT +}FLASH_Status; + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Constants + * @{ + */ + +/** @defgroup Flash_Latency + * @{ + */ + +#define FLASH_Latency_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */ +#define FLASH_Latency_1 ((uint32_t)0x00000001) /*!< FLASH One Latency cycle */ +#define FLASH_Latency_2 ((uint32_t)0x00000002) /*!< FLASH Two Latency cycles */ +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \ + ((LATENCY) == FLASH_Latency_1) || \ + ((LATENCY) == FLASH_Latency_2)) +/** + * @} + */ + +/** @defgroup Half_Cycle_Enable_Disable + * @{ + */ + +#define FLASH_HalfCycleAccess_Enable ((uint32_t)0x00000008) /*!< FLASH Half Cycle Enable */ +#define FLASH_HalfCycleAccess_Disable ((uint32_t)0x00000000) /*!< FLASH Half Cycle Disable */ +#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \ + ((STATE) == FLASH_HalfCycleAccess_Disable)) +/** + * @} + */ + +/** @defgroup Prefetch_Buffer_Enable_Disable + * @{ + */ + +#define FLASH_PrefetchBuffer_Enable ((uint32_t)0x00000010) /*!< FLASH Prefetch Buffer Enable */ +#define FLASH_PrefetchBuffer_Disable ((uint32_t)0x00000000) /*!< FLASH Prefetch Buffer Disable */ +#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \ + ((STATE) == FLASH_PrefetchBuffer_Disable)) +/** + * @} + */ + +/** @defgroup Option_Bytes_Write_Protection + * @{ + */ + +/* Values to be used with STM32 Low and Medium density devices */ +#define FLASH_WRProt_Pages0to3 ((uint32_t)0x00000001) /*!< STM32 Low and Medium density devices: Write protection of page 0 to 3 */ +#define FLASH_WRProt_Pages4to7 ((uint32_t)0x00000002) /*!< STM32 Low and Medium density devices: Write protection of page 4 to 7 */ +#define FLASH_WRProt_Pages8to11 ((uint32_t)0x00000004) /*!< STM32 Low and Medium density devices: Write protection of page 8 to 11 */ +#define FLASH_WRProt_Pages12to15 ((uint32_t)0x00000008) /*!< STM32 Low and Medium density devices: Write protection of page 12 to 15 */ +#define FLASH_WRProt_Pages16to19 ((uint32_t)0x00000010) /*!< STM32 Low and Medium density devices: Write protection of page 16 to 19 */ +#define FLASH_WRProt_Pages20to23 ((uint32_t)0x00000020) /*!< STM32 Low and Medium density devices: Write protection of page 20 to 23 */ +#define FLASH_WRProt_Pages24to27 ((uint32_t)0x00000040) /*!< STM32 Low and Medium density devices: Write protection of page 24 to 27 */ +#define FLASH_WRProt_Pages28to31 ((uint32_t)0x00000080) /*!< STM32 Low and Medium density devices: Write protection of page 28 to 31 */ + +/* Values to be used with STM32 Medium-density devices */ +#define FLASH_WRProt_Pages32to35 ((uint32_t)0x00000100) /*!< STM32 Medium-density devices: Write protection of page 32 to 35 */ +#define FLASH_WRProt_Pages36to39 ((uint32_t)0x00000200) /*!< STM32 Medium-density devices: Write protection of page 36 to 39 */ +#define FLASH_WRProt_Pages40to43 ((uint32_t)0x00000400) /*!< STM32 Medium-density devices: Write protection of page 40 to 43 */ +#define FLASH_WRProt_Pages44to47 ((uint32_t)0x00000800) /*!< STM32 Medium-density devices: Write protection of page 44 to 47 */ +#define FLASH_WRProt_Pages48to51 ((uint32_t)0x00001000) /*!< STM32 Medium-density devices: Write protection of page 48 to 51 */ +#define FLASH_WRProt_Pages52to55 ((uint32_t)0x00002000) /*!< STM32 Medium-density devices: Write protection of page 52 to 55 */ +#define FLASH_WRProt_Pages56to59 ((uint32_t)0x00004000) /*!< STM32 Medium-density devices: Write protection of page 56 to 59 */ +#define FLASH_WRProt_Pages60to63 ((uint32_t)0x00008000) /*!< STM32 Medium-density devices: Write protection of page 60 to 63 */ +#define FLASH_WRProt_Pages64to67 ((uint32_t)0x00010000) /*!< STM32 Medium-density devices: Write protection of page 64 to 67 */ +#define FLASH_WRProt_Pages68to71 ((uint32_t)0x00020000) /*!< STM32 Medium-density devices: Write protection of page 68 to 71 */ +#define FLASH_WRProt_Pages72to75 ((uint32_t)0x00040000) /*!< STM32 Medium-density devices: Write protection of page 72 to 75 */ +#define FLASH_WRProt_Pages76to79 ((uint32_t)0x00080000) /*!< STM32 Medium-density devices: Write protection of page 76 to 79 */ +#define FLASH_WRProt_Pages80to83 ((uint32_t)0x00100000) /*!< STM32 Medium-density devices: Write protection of page 80 to 83 */ +#define FLASH_WRProt_Pages84to87 ((uint32_t)0x00200000) /*!< STM32 Medium-density devices: Write protection of page 84 to 87 */ +#define FLASH_WRProt_Pages88to91 ((uint32_t)0x00400000) /*!< STM32 Medium-density devices: Write protection of page 88 to 91 */ +#define FLASH_WRProt_Pages92to95 ((uint32_t)0x00800000) /*!< STM32 Medium-density devices: Write protection of page 92 to 95 */ +#define FLASH_WRProt_Pages96to99 ((uint32_t)0x01000000) /*!< STM32 Medium-density devices: Write protection of page 96 to 99 */ +#define FLASH_WRProt_Pages100to103 ((uint32_t)0x02000000) /*!< STM32 Medium-density devices: Write protection of page 100 to 103 */ +#define FLASH_WRProt_Pages104to107 ((uint32_t)0x04000000) /*!< STM32 Medium-density devices: Write protection of page 104 to 107 */ +#define FLASH_WRProt_Pages108to111 ((uint32_t)0x08000000) /*!< STM32 Medium-density devices: Write protection of page 108 to 111 */ +#define FLASH_WRProt_Pages112to115 ((uint32_t)0x10000000) /*!< STM32 Medium-density devices: Write protection of page 112 to 115 */ +#define FLASH_WRProt_Pages116to119 ((uint32_t)0x20000000) /*!< STM32 Medium-density devices: Write protection of page 115 to 119 */ +#define FLASH_WRProt_Pages120to123 ((uint32_t)0x40000000) /*!< STM32 Medium-density devices: Write protection of page 120 to 123 */ +#define FLASH_WRProt_Pages124to127 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 124 to 127 */ + +/* Values to be used with STM32 High-density and STM32F10X Connectivity line devices */ +#define FLASH_WRProt_Pages0to1 ((uint32_t)0x00000001) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 0 to 1 */ +#define FLASH_WRProt_Pages2to3 ((uint32_t)0x00000002) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 2 to 3 */ +#define FLASH_WRProt_Pages4to5 ((uint32_t)0x00000004) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 4 to 5 */ +#define FLASH_WRProt_Pages6to7 ((uint32_t)0x00000008) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 6 to 7 */ +#define FLASH_WRProt_Pages8to9 ((uint32_t)0x00000010) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 8 to 9 */ +#define FLASH_WRProt_Pages10to11 ((uint32_t)0x00000020) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 10 to 11 */ +#define FLASH_WRProt_Pages12to13 ((uint32_t)0x00000040) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 12 to 13 */ +#define FLASH_WRProt_Pages14to15 ((uint32_t)0x00000080) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 14 to 15 */ +#define FLASH_WRProt_Pages16to17 ((uint32_t)0x00000100) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 16 to 17 */ +#define FLASH_WRProt_Pages18to19 ((uint32_t)0x00000200) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 18 to 19 */ +#define FLASH_WRProt_Pages20to21 ((uint32_t)0x00000400) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 20 to 21 */ +#define FLASH_WRProt_Pages22to23 ((uint32_t)0x00000800) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 22 to 23 */ +#define FLASH_WRProt_Pages24to25 ((uint32_t)0x00001000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 24 to 25 */ +#define FLASH_WRProt_Pages26to27 ((uint32_t)0x00002000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 26 to 27 */ +#define FLASH_WRProt_Pages28to29 ((uint32_t)0x00004000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 28 to 29 */ +#define FLASH_WRProt_Pages30to31 ((uint32_t)0x00008000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 30 to 31 */ +#define FLASH_WRProt_Pages32to33 ((uint32_t)0x00010000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 32 to 33 */ +#define FLASH_WRProt_Pages34to35 ((uint32_t)0x00020000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 34 to 35 */ +#define FLASH_WRProt_Pages36to37 ((uint32_t)0x00040000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 36 to 37 */ +#define FLASH_WRProt_Pages38to39 ((uint32_t)0x00080000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 38 to 39 */ +#define FLASH_WRProt_Pages40to41 ((uint32_t)0x00100000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 40 to 41 */ +#define FLASH_WRProt_Pages42to43 ((uint32_t)0x00200000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 42 to 43 */ +#define FLASH_WRProt_Pages44to45 ((uint32_t)0x00400000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 44 to 45 */ +#define FLASH_WRProt_Pages46to47 ((uint32_t)0x00800000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 46 to 47 */ +#define FLASH_WRProt_Pages48to49 ((uint32_t)0x01000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 48 to 49 */ +#define FLASH_WRProt_Pages50to51 ((uint32_t)0x02000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 50 to 51 */ +#define FLASH_WRProt_Pages52to53 ((uint32_t)0x04000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 52 to 53 */ +#define FLASH_WRProt_Pages54to55 ((uint32_t)0x08000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 54 to 55 */ +#define FLASH_WRProt_Pages56to57 ((uint32_t)0x10000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 56 to 57 */ +#define FLASH_WRProt_Pages58to59 ((uint32_t)0x20000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 58 to 59 */ +#define FLASH_WRProt_Pages60to61 ((uint32_t)0x40000000) /*!< STM32 High-density, XL-density and Connectivity line devices: + Write protection of page 60 to 61 */ +#define FLASH_WRProt_Pages62to127 ((uint32_t)0x80000000) /*!< STM32 Connectivity line devices: Write protection of page 62 to 127 */ +#define FLASH_WRProt_Pages62to255 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 62 to 255 */ +#define FLASH_WRProt_Pages62to511 ((uint32_t)0x80000000) /*!< STM32 XL-density devices: Write protection of page 62 to 511 */ + +#define FLASH_WRProt_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */ + +#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000)) + +#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF)) + +#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_IWatchdog + * @{ + */ + +#define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */ +#define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */ +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_nRST_STOP + * @{ + */ + +#define OB_STOP_NoRST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */ +#define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */ +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_nRST_STDBY + * @{ + */ + +#define OB_STDBY_NoRST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */ +#define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */ +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST)) + +#ifdef STM32F10X_XL +/** + * @} + */ +/** @defgroup FLASH_Boot + * @{ + */ +#define FLASH_BOOT_Bank1 ((uint16_t)0x0000) /*!< At startup, if boot pins are set in boot from user Flash position + and this parameter is selected the device will boot from Bank1(Default) */ +#define FLASH_BOOT_Bank2 ((uint16_t)0x0001) /*!< At startup, if boot pins are set in boot from user Flash position + and this parameter is selected the device will boot from Bank 2 or Bank 1, + depending on the activation of the bank */ +#define IS_FLASH_BOOT(BOOT) (((BOOT) == FLASH_BOOT_Bank1) || ((BOOT) == FLASH_BOOT_Bank2)) +#endif +/** + * @} + */ +/** @defgroup FLASH_Interrupts + * @{ + */ +#ifdef STM32F10X_XL +#define FLASH_IT_BANK2_ERROR ((uint32_t)0x80000400) /*!< FPEC BANK2 error interrupt source */ +#define FLASH_IT_BANK2_EOP ((uint32_t)0x80001000) /*!< End of FLASH BANK2 Operation Interrupt source */ + +#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */ +#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */ + +#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC BANK1 error interrupt source */ +#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH BANK1 Operation Interrupt source */ +#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0x7FFFEBFF) == 0x00000000) && (((IT) != 0x00000000))) +#else +#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC error interrupt source */ +#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH Operation Interrupt source */ +#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */ +#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */ + +#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000))) +#endif + +/** + * @} + */ + +/** @defgroup FLASH_Flags + * @{ + */ +#ifdef STM32F10X_XL +#define FLASH_FLAG_BANK2_BSY ((uint32_t)0x80000001) /*!< FLASH BANK2 Busy flag */ +#define FLASH_FLAG_BANK2_EOP ((uint32_t)0x80000020) /*!< FLASH BANK2 End of Operation flag */ +#define FLASH_FLAG_BANK2_PGERR ((uint32_t)0x80000004) /*!< FLASH BANK2 Program error flag */ +#define FLASH_FLAG_BANK2_WRPRTERR ((uint32_t)0x80000010) /*!< FLASH BANK2 Write protected error flag */ + +#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/ +#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */ +#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */ +#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */ + +#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */ +#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */ +#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */ +#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */ + +#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0x7FFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000)) +#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ + ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_OPTERR)|| \ + ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \ + ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_BANK2_BSY) || ((FLAG) == FLASH_FLAG_BANK2_EOP) || \ + ((FLAG) == FLASH_FLAG_BANK2_PGERR) || ((FLAG) == FLASH_FLAG_BANK2_WRPRTERR)) +#else +#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */ +#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */ +#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */ +#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */ + +#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/ +#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */ +#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */ +#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */ + +#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000)) +#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ + ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \ + ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \ + ((FLAG) == FLASH_FLAG_OPTERR)) +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions + * @{ + */ + +/*------------ Functions used for all STM32F10x devices -----*/ +void FLASH_SetLatency(uint32_t FLASH_Latency); +void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess); +void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer); +void FLASH_Unlock(void); +void FLASH_Lock(void); +FLASH_Status FLASH_ErasePage(uint32_t Page_Address); +FLASH_Status FLASH_EraseAllPages(void); +FLASH_Status FLASH_EraseOptionBytes(void); +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data); +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data); +FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data); +FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages); +FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState); +FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY); +uint32_t FLASH_GetUserOptionByte(void); +uint32_t FLASH_GetWriteProtectionOptionByte(void); +FlagStatus FLASH_GetReadOutProtectionStatus(void); +FlagStatus FLASH_GetPrefetchBufferStatus(void); +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState); +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG); +void FLASH_ClearFlag(uint32_t FLASH_FLAG); +FLASH_Status FLASH_GetStatus(void); +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout); + +/*------------ New function used for all STM32F10x devices -----*/ +void FLASH_UnlockBank1(void); +void FLASH_LockBank1(void); +FLASH_Status FLASH_EraseAllBank1Pages(void); +FLASH_Status FLASH_GetBank1Status(void); +FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout); + +#ifdef STM32F10X_XL +/*---- New Functions used only with STM32F10x_XL density devices -----*/ +void FLASH_UnlockBank2(void); +void FLASH_LockBank2(void); +FLASH_Status FLASH_EraseAllBank2Pages(void); +FLASH_Status FLASH_GetBank2Status(void); +FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout); +FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_FLASH_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_fsmc.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_fsmc.h new file mode 100644 index 0000000..6e1769d --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_fsmc.h @@ -0,0 +1,733 @@ +/** + ****************************************************************************** + * @file stm32f10x_fsmc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the FSMC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_FSMC_H +#define __STM32F10x_FSMC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FSMC + * @{ + */ + +/** @defgroup FSMC_Exported_Types + * @{ + */ + +/** + * @brief Timing parameters For NOR/SRAM Banks + */ + +typedef struct +{ + uint32_t FSMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address setup time. + This parameter can be a value between 0 and 0xF. + @note: It is not used with synchronous NOR Flash memories. */ + + uint32_t FSMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address hold time. + This parameter can be a value between 0 and 0xF. + @note: It is not used with synchronous NOR Flash memories.*/ + + uint32_t FSMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the data setup time. + This parameter can be a value between 0 and 0xFF. + @note: It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */ + + uint32_t FSMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure + the duration of the bus turnaround. + This parameter can be a value between 0 and 0xF. + @note: It is only used for multiplexed NOR Flash memories. */ + + uint32_t FSMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles. + This parameter can be a value between 1 and 0xF. + @note: This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */ + + uint32_t FSMC_DataLatency; /*!< Defines the number of memory clock cycles to issue + to the memory before getting the first data. + The value of this parameter depends on the memory type as shown below: + - It must be set to 0 in case of a CRAM + - It is don't care in asynchronous NOR, SRAM or ROM accesses + - It may assume a value between 0 and 0xF in NOR Flash memories + with synchronous burst mode enable */ + + uint32_t FSMC_AccessMode; /*!< Specifies the asynchronous access mode. + This parameter can be a value of @ref FSMC_Access_Mode */ +}FSMC_NORSRAMTimingInitTypeDef; + +/** + * @brief FSMC NOR/SRAM Init structure definition + */ + +typedef struct +{ + uint32_t FSMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used. + This parameter can be a value of @ref FSMC_NORSRAM_Bank */ + + uint32_t FSMC_DataAddressMux; /*!< Specifies whether the address and data values are + multiplexed on the databus or not. + This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */ + + uint32_t FSMC_MemoryType; /*!< Specifies the type of external memory attached to + the corresponding memory bank. + This parameter can be a value of @ref FSMC_Memory_Type */ + + uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be a value of @ref FSMC_Data_Width */ + + uint32_t FSMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, + valid only with synchronous burst Flash memories. + This parameter can be a value of @ref FSMC_Burst_Access_Mode */ + + uint32_t FSMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, + valid only with asynchronous Flash memories. + This parameter can be a value of @ref FSMC_AsynchronousWait */ + + uint32_t FSMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing + the Flash memory in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */ + + uint32_t FSMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash + memory, valid only when accessing Flash memories in burst mode. + This parameter can be a value of @ref FSMC_Wrap_Mode */ + + uint32_t FSMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one + clock cycle before the wait state or during the wait state, + valid only when accessing memories in burst mode. + This parameter can be a value of @ref FSMC_Wait_Timing */ + + uint32_t FSMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FSMC. + This parameter can be a value of @ref FSMC_Write_Operation */ + + uint32_t FSMC_WaitSignal; /*!< Enables or disables the wait-state insertion via wait + signal, valid for Flash memory access in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal */ + + uint32_t FSMC_ExtendedMode; /*!< Enables or disables the extended mode. + This parameter can be a value of @ref FSMC_Extended_Mode */ + + uint32_t FSMC_WriteBurst; /*!< Enables or disables the write burst operation. + This parameter can be a value of @ref FSMC_Write_Burst */ + + FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the ExtendedMode is not used*/ + + FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; /*!< Timing Parameters for write access if the ExtendedMode is used*/ +}FSMC_NORSRAMInitTypeDef; + +/** + * @brief Timing parameters For FSMC NAND and PCCARD Banks + */ + +typedef struct +{ + uint32_t FSMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before + the command assertion for NAND-Flash read or write access + to common/Attribute or I/O memory space (depending on + the memory space timing to be configured). + This parameter can be a value between 0 and 0xFF.*/ + + uint32_t FSMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the + command for NAND-Flash read or write access to + common/Attribute or I/O memory space (depending on the + memory space timing to be configured). + This parameter can be a number between 0x00 and 0xFF */ + + uint32_t FSMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address + (and data for write access) after the command deassertion + for NAND-Flash read or write access to common/Attribute + or I/O memory space (depending on the memory space timing + to be configured). + This parameter can be a number between 0x00 and 0xFF */ + + uint32_t FSMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the + databus is kept in HiZ after the start of a NAND-Flash + write access to common/Attribute or I/O memory space (depending + on the memory space timing to be configured). + This parameter can be a number between 0x00 and 0xFF */ +}FSMC_NAND_PCCARDTimingInitTypeDef; + +/** + * @brief FSMC NAND Init structure definition + */ + +typedef struct +{ + uint32_t FSMC_Bank; /*!< Specifies the NAND memory bank that will be used. + This parameter can be a value of @ref FSMC_NAND_Bank */ + + uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank. + This parameter can be any value of @ref FSMC_Wait_feature */ + + uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be any value of @ref FSMC_Data_Width */ + + uint32_t FSMC_ECC; /*!< Enables or disables the ECC computation. + This parameter can be any value of @ref FSMC_ECC */ + + uint32_t FSMC_ECCPageSize; /*!< Defines the page size for the extended ECC. + This parameter can be any value of @ref FSMC_ECC_Page_Size */ + + uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between 0 and 0xFF. */ + + uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between 0x0 and 0xFF */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */ +}FSMC_NANDInitTypeDef; + +/** + * @brief FSMC PCCARD Init structure definition + */ + +typedef struct +{ + uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank. + This parameter can be any value of @ref FSMC_Wait_feature */ + + uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between CLE low and RE low. + This parameter can be a value between 0 and 0xFF. */ + + uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the + delay between ALE low and RE low. + This parameter can be a number between 0x0 and 0xFF */ + + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */ + + FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */ +}FSMC_PCCARDInitTypeDef; + +/** + * @} + */ + +/** @defgroup FSMC_Exported_Constants + * @{ + */ + +/** @defgroup FSMC_NORSRAM_Bank + * @{ + */ +#define FSMC_Bank1_NORSRAM1 ((uint32_t)0x00000000) +#define FSMC_Bank1_NORSRAM2 ((uint32_t)0x00000002) +#define FSMC_Bank1_NORSRAM3 ((uint32_t)0x00000004) +#define FSMC_Bank1_NORSRAM4 ((uint32_t)0x00000006) +/** + * @} + */ + +/** @defgroup FSMC_NAND_Bank + * @{ + */ +#define FSMC_Bank2_NAND ((uint32_t)0x00000010) +#define FSMC_Bank3_NAND ((uint32_t)0x00000100) +/** + * @} + */ + +/** @defgroup FSMC_PCCARD_Bank + * @{ + */ +#define FSMC_Bank4_PCCARD ((uint32_t)0x00001000) +/** + * @} + */ + +#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \ + ((BANK) == FSMC_Bank1_NORSRAM2) || \ + ((BANK) == FSMC_Bank1_NORSRAM3) || \ + ((BANK) == FSMC_Bank1_NORSRAM4)) + +#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ + ((BANK) == FSMC_Bank3_NAND)) + +#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ + ((BANK) == FSMC_Bank3_NAND) || \ + ((BANK) == FSMC_Bank4_PCCARD)) + +#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ + ((BANK) == FSMC_Bank3_NAND) || \ + ((BANK) == FSMC_Bank4_PCCARD)) + +/** @defgroup NOR_SRAM_Controller + * @{ + */ + +/** @defgroup FSMC_Data_Address_Bus_Multiplexing + * @{ + */ + +#define FSMC_DataAddressMux_Disable ((uint32_t)0x00000000) +#define FSMC_DataAddressMux_Enable ((uint32_t)0x00000002) +#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \ + ((MUX) == FSMC_DataAddressMux_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Memory_Type + * @{ + */ + +#define FSMC_MemoryType_SRAM ((uint32_t)0x00000000) +#define FSMC_MemoryType_PSRAM ((uint32_t)0x00000004) +#define FSMC_MemoryType_NOR ((uint32_t)0x00000008) +#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \ + ((MEMORY) == FSMC_MemoryType_PSRAM)|| \ + ((MEMORY) == FSMC_MemoryType_NOR)) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Width + * @{ + */ + +#define FSMC_MemoryDataWidth_8b ((uint32_t)0x00000000) +#define FSMC_MemoryDataWidth_16b ((uint32_t)0x00000010) +#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \ + ((WIDTH) == FSMC_MemoryDataWidth_16b)) + +/** + * @} + */ + +/** @defgroup FSMC_Burst_Access_Mode + * @{ + */ + +#define FSMC_BurstAccessMode_Disable ((uint32_t)0x00000000) +#define FSMC_BurstAccessMode_Enable ((uint32_t)0x00000100) +#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \ + ((STATE) == FSMC_BurstAccessMode_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_AsynchronousWait + * @{ + */ +#define FSMC_AsynchronousWait_Disable ((uint32_t)0x00000000) +#define FSMC_AsynchronousWait_Enable ((uint32_t)0x00008000) +#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \ + ((STATE) == FSMC_AsynchronousWait_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal_Polarity + * @{ + */ + +#define FSMC_WaitSignalPolarity_Low ((uint32_t)0x00000000) +#define FSMC_WaitSignalPolarity_High ((uint32_t)0x00000200) +#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \ + ((POLARITY) == FSMC_WaitSignalPolarity_High)) + +/** + * @} + */ + +/** @defgroup FSMC_Wrap_Mode + * @{ + */ + +#define FSMC_WrapMode_Disable ((uint32_t)0x00000000) +#define FSMC_WrapMode_Enable ((uint32_t)0x00000400) +#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \ + ((MODE) == FSMC_WrapMode_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Timing + * @{ + */ + +#define FSMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000) +#define FSMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800) +#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \ + ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState)) + +/** + * @} + */ + +/** @defgroup FSMC_Write_Operation + * @{ + */ + +#define FSMC_WriteOperation_Disable ((uint32_t)0x00000000) +#define FSMC_WriteOperation_Enable ((uint32_t)0x00001000) +#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \ + ((OPERATION) == FSMC_WriteOperation_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal + * @{ + */ + +#define FSMC_WaitSignal_Disable ((uint32_t)0x00000000) +#define FSMC_WaitSignal_Enable ((uint32_t)0x00002000) +#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \ + ((SIGNAL) == FSMC_WaitSignal_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Extended_Mode + * @{ + */ + +#define FSMC_ExtendedMode_Disable ((uint32_t)0x00000000) +#define FSMC_ExtendedMode_Enable ((uint32_t)0x00004000) + +#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \ + ((MODE) == FSMC_ExtendedMode_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Write_Burst + * @{ + */ + +#define FSMC_WriteBurst_Disable ((uint32_t)0x00000000) +#define FSMC_WriteBurst_Enable ((uint32_t)0x00080000) +#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \ + ((BURST) == FSMC_WriteBurst_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Address_Setup_Time + * @{ + */ + +#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Address_Hold_Time + * @{ + */ + +#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Setup_Time + * @{ + */ + +#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF)) + +/** + * @} + */ + +/** @defgroup FSMC_Bus_Turn_around_Duration + * @{ + */ + +#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_CLK_Division + * @{ + */ + +#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Latency + * @{ + */ + +#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Access_Mode + * @{ + */ + +#define FSMC_AccessMode_A ((uint32_t)0x00000000) +#define FSMC_AccessMode_B ((uint32_t)0x10000000) +#define FSMC_AccessMode_C ((uint32_t)0x20000000) +#define FSMC_AccessMode_D ((uint32_t)0x30000000) +#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \ + ((MODE) == FSMC_AccessMode_B) || \ + ((MODE) == FSMC_AccessMode_C) || \ + ((MODE) == FSMC_AccessMode_D)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup NAND_PCCARD_Controller + * @{ + */ + +/** @defgroup FSMC_Wait_feature + * @{ + */ + +#define FSMC_Waitfeature_Disable ((uint32_t)0x00000000) +#define FSMC_Waitfeature_Enable ((uint32_t)0x00000002) +#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \ + ((FEATURE) == FSMC_Waitfeature_Enable)) + +/** + * @} + */ + + +/** @defgroup FSMC_ECC + * @{ + */ + +#define FSMC_ECC_Disable ((uint32_t)0x00000000) +#define FSMC_ECC_Enable ((uint32_t)0x00000040) +#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \ + ((STATE) == FSMC_ECC_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_ECC_Page_Size + * @{ + */ + +#define FSMC_ECCPageSize_256Bytes ((uint32_t)0x00000000) +#define FSMC_ECCPageSize_512Bytes ((uint32_t)0x00020000) +#define FSMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000) +#define FSMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000) +#define FSMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000) +#define FSMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000) +#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_512Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \ + ((SIZE) == FSMC_ECCPageSize_8192Bytes)) + +/** + * @} + */ + +/** @defgroup FSMC_TCLR_Setup_Time + * @{ + */ + +#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_TAR_Setup_Time + * @{ + */ + +#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_Setup_Time + * @{ + */ + +#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Setup_Time + * @{ + */ + +#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_Hold_Setup_Time + * @{ + */ + +#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_HiZ_Setup_Time + * @{ + */ + +#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF) + +/** + * @} + */ + +/** @defgroup FSMC_Interrupt_sources + * @{ + */ + +#define FSMC_IT_RisingEdge ((uint32_t)0x00000008) +#define FSMC_IT_Level ((uint32_t)0x00000010) +#define FSMC_IT_FallingEdge ((uint32_t)0x00000020) +#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000)) +#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \ + ((IT) == FSMC_IT_Level) || \ + ((IT) == FSMC_IT_FallingEdge)) +/** + * @} + */ + +/** @defgroup FSMC_Flags + * @{ + */ + +#define FSMC_FLAG_RisingEdge ((uint32_t)0x00000001) +#define FSMC_FLAG_Level ((uint32_t)0x00000002) +#define FSMC_FLAG_FallingEdge ((uint32_t)0x00000004) +#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040) +#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \ + ((FLAG) == FSMC_FLAG_Level) || \ + ((FLAG) == FSMC_FLAG_FallingEdge) || \ + ((FLAG) == FSMC_FLAG_FEMPT)) + +#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup FSMC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FSMC_Exported_Functions + * @{ + */ + +void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank); +void FSMC_NANDDeInit(uint32_t FSMC_Bank); +void FSMC_PCCARDDeInit(void); +void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); +void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); +void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); +void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); +void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); +void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); +void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState); +void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState); +void FSMC_PCCARDCmd(FunctionalState NewState); +void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState); +uint32_t FSMC_GetECC(uint32_t FSMC_Bank); +void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState); +FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG); +void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG); +ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT); +void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_FSMC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_gpio.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_gpio.h new file mode 100644 index 0000000..dd28da8 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_gpio.h @@ -0,0 +1,385 @@ +/** + ****************************************************************************** + * @file stm32f10x_gpio.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the GPIO + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_GPIO_H +#define __STM32F10x_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/** @defgroup GPIO_Exported_Types + * @{ + */ + +#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \ + ((PERIPH) == GPIOB) || \ + ((PERIPH) == GPIOC) || \ + ((PERIPH) == GPIOD) || \ + ((PERIPH) == GPIOE) || \ + ((PERIPH) == GPIOF) || \ + ((PERIPH) == GPIOG)) + +/** + * @brief Output Maximum frequency selection + */ + +typedef enum +{ + GPIO_Speed_10MHz = 1, + GPIO_Speed_2MHz, + GPIO_Speed_50MHz +}GPIOSpeed_TypeDef; +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \ + ((SPEED) == GPIO_Speed_50MHz)) + +/** + * @brief Configuration Mode enumeration + */ + +typedef enum +{ GPIO_Mode_AIN = 0x0, + GPIO_Mode_IN_FLOATING = 0x04, + GPIO_Mode_IPD = 0x28, + GPIO_Mode_IPU = 0x48, + GPIO_Mode_Out_OD = 0x14, + GPIO_Mode_Out_PP = 0x10, + GPIO_Mode_AF_OD = 0x1C, + GPIO_Mode_AF_PP = 0x18 +}GPIOMode_TypeDef; + +#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \ + ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \ + ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \ + ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP)) + +/** + * @brief GPIO Init structure definition + */ + +typedef struct +{ + uint16_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins_define */ + + GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIOSpeed_TypeDef */ + + GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIOMode_TypeDef */ +}GPIO_InitTypeDef; + + +/** + * @brief Bit_SET and Bit_RESET enumeration + */ + +typedef enum +{ Bit_RESET = 0, + Bit_SET +}BitAction; + +#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Constants + * @{ + */ + +/** @defgroup GPIO_pins_define + * @{ + */ + +#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ +#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ +#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ +#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ +#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ +#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ +#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ +#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ +#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ +#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ +#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ +#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ +#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ +#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ +#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ +#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ +#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */ + +#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00)) + +#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ + ((PIN) == GPIO_Pin_1) || \ + ((PIN) == GPIO_Pin_2) || \ + ((PIN) == GPIO_Pin_3) || \ + ((PIN) == GPIO_Pin_4) || \ + ((PIN) == GPIO_Pin_5) || \ + ((PIN) == GPIO_Pin_6) || \ + ((PIN) == GPIO_Pin_7) || \ + ((PIN) == GPIO_Pin_8) || \ + ((PIN) == GPIO_Pin_9) || \ + ((PIN) == GPIO_Pin_10) || \ + ((PIN) == GPIO_Pin_11) || \ + ((PIN) == GPIO_Pin_12) || \ + ((PIN) == GPIO_Pin_13) || \ + ((PIN) == GPIO_Pin_14) || \ + ((PIN) == GPIO_Pin_15)) + +/** + * @} + */ + +/** @defgroup GPIO_Remap_define + * @{ + */ + +#define GPIO_Remap_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Alternate Function mapping */ +#define GPIO_Remap_I2C1 ((uint32_t)0x00000002) /*!< I2C1 Alternate Function mapping */ +#define GPIO_Remap_USART1 ((uint32_t)0x00000004) /*!< USART1 Alternate Function mapping */ +#define GPIO_Remap_USART2 ((uint32_t)0x00000008) /*!< USART2 Alternate Function mapping */ +#define GPIO_PartialRemap_USART3 ((uint32_t)0x00140010) /*!< USART3 Partial Alternate Function mapping */ +#define GPIO_FullRemap_USART3 ((uint32_t)0x00140030) /*!< USART3 Full Alternate Function mapping */ +#define GPIO_PartialRemap_TIM1 ((uint32_t)0x00160040) /*!< TIM1 Partial Alternate Function mapping */ +#define GPIO_FullRemap_TIM1 ((uint32_t)0x001600C0) /*!< TIM1 Full Alternate Function mapping */ +#define GPIO_PartialRemap1_TIM2 ((uint32_t)0x00180100) /*!< TIM2 Partial1 Alternate Function mapping */ +#define GPIO_PartialRemap2_TIM2 ((uint32_t)0x00180200) /*!< TIM2 Partial2 Alternate Function mapping */ +#define GPIO_FullRemap_TIM2 ((uint32_t)0x00180300) /*!< TIM2 Full Alternate Function mapping */ +#define GPIO_PartialRemap_TIM3 ((uint32_t)0x001A0800) /*!< TIM3 Partial Alternate Function mapping */ +#define GPIO_FullRemap_TIM3 ((uint32_t)0x001A0C00) /*!< TIM3 Full Alternate Function mapping */ +#define GPIO_Remap_TIM4 ((uint32_t)0x00001000) /*!< TIM4 Alternate Function mapping */ +#define GPIO_Remap1_CAN1 ((uint32_t)0x001D4000) /*!< CAN1 Alternate Function mapping */ +#define GPIO_Remap2_CAN1 ((uint32_t)0x001D6000) /*!< CAN1 Alternate Function mapping */ +#define GPIO_Remap_PD01 ((uint32_t)0x00008000) /*!< PD01 Alternate Function mapping */ +#define GPIO_Remap_TIM5CH4_LSI ((uint32_t)0x00200001) /*!< LSI connected to TIM5 Channel4 input capture for calibration */ +#define GPIO_Remap_ADC1_ETRGINJ ((uint32_t)0x00200002) /*!< ADC1 External Trigger Injected Conversion remapping */ +#define GPIO_Remap_ADC1_ETRGREG ((uint32_t)0x00200004) /*!< ADC1 External Trigger Regular Conversion remapping */ +#define GPIO_Remap_ADC2_ETRGINJ ((uint32_t)0x00200008) /*!< ADC2 External Trigger Injected Conversion remapping */ +#define GPIO_Remap_ADC2_ETRGREG ((uint32_t)0x00200010) /*!< ADC2 External Trigger Regular Conversion remapping */ +#define GPIO_Remap_ETH ((uint32_t)0x00200020) /*!< Ethernet remapping (only for Connectivity line devices) */ +#define GPIO_Remap_CAN2 ((uint32_t)0x00200040) /*!< CAN2 remapping (only for Connectivity line devices) */ +#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */ +#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */ +#define GPIO_Remap_SPI3 ((uint32_t)0x00201100) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */ +#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected + to TIM2 Internal Trigger 1 for calibration + (only for Connectivity line devices) */ +#define GPIO_Remap_PTP_PPS ((uint32_t)0x00204000) /*!< Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */ + +#define GPIO_Remap_TIM15 ((uint32_t)0x80000001) /*!< TIM15 Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_TIM16 ((uint32_t)0x80000002) /*!< TIM16 Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_TIM17 ((uint32_t)0x80000004) /*!< TIM17 Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_CEC ((uint32_t)0x80000008) /*!< CEC Alternate Function mapping (only for Value line devices) */ +#define GPIO_Remap_TIM1_DMA ((uint32_t)0x80000010) /*!< TIM1 DMA requests mapping (only for Value line devices) */ + +#define GPIO_Remap_TIM9 ((uint32_t)0x80000020) /*!< TIM9 Alternate Function mapping (only for XL-density devices) */ +#define GPIO_Remap_TIM10 ((uint32_t)0x80000040) /*!< TIM10 Alternate Function mapping (only for XL-density devices) */ +#define GPIO_Remap_TIM11 ((uint32_t)0x80000080) /*!< TIM11 Alternate Function mapping (only for XL-density devices) */ +#define GPIO_Remap_TIM13 ((uint32_t)0x80000100) /*!< TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) */ +#define GPIO_Remap_TIM14 ((uint32_t)0x80000200) /*!< TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) */ +#define GPIO_Remap_FSMC_NADV ((uint32_t)0x80000400) /*!< FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) */ + +#define GPIO_Remap_TIM67_DAC_DMA ((uint32_t)0x80000800) /*!< TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) */ +#define GPIO_Remap_TIM12 ((uint32_t)0x80001000) /*!< TIM12 Alternate Function mapping (only for High density Value line devices) */ +#define GPIO_Remap_MISC ((uint32_t)0x80002000) /*!< Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, + only for High density Value line devices) */ + +#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \ + ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \ + ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \ + ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \ + ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \ + ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \ + ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \ + ((REMAP) == GPIO_Remap1_CAN1) || ((REMAP) == GPIO_Remap2_CAN1) || \ + ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \ + ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \ + ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \ + ((REMAP) == GPIO_Remap_ETH) ||((REMAP) == GPIO_Remap_CAN2) || \ + ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable) || \ + ((REMAP) == GPIO_Remap_SWJ_Disable)|| ((REMAP) == GPIO_Remap_SPI3) || \ + ((REMAP) == GPIO_Remap_TIM2ITR1_PTP_SOF) || ((REMAP) == GPIO_Remap_PTP_PPS) || \ + ((REMAP) == GPIO_Remap_TIM15) || ((REMAP) == GPIO_Remap_TIM16) || \ + ((REMAP) == GPIO_Remap_TIM17) || ((REMAP) == GPIO_Remap_CEC) || \ + ((REMAP) == GPIO_Remap_TIM1_DMA) || ((REMAP) == GPIO_Remap_TIM9) || \ + ((REMAP) == GPIO_Remap_TIM10) || ((REMAP) == GPIO_Remap_TIM11) || \ + ((REMAP) == GPIO_Remap_TIM13) || ((REMAP) == GPIO_Remap_TIM14) || \ + ((REMAP) == GPIO_Remap_FSMC_NADV) || ((REMAP) == GPIO_Remap_TIM67_DAC_DMA) || \ + ((REMAP) == GPIO_Remap_TIM12) || ((REMAP) == GPIO_Remap_MISC)) + +/** + * @} + */ + +/** @defgroup GPIO_Port_Sources + * @{ + */ + +#define GPIO_PortSourceGPIOA ((uint8_t)0x00) +#define GPIO_PortSourceGPIOB ((uint8_t)0x01) +#define GPIO_PortSourceGPIOC ((uint8_t)0x02) +#define GPIO_PortSourceGPIOD ((uint8_t)0x03) +#define GPIO_PortSourceGPIOE ((uint8_t)0x04) +#define GPIO_PortSourceGPIOF ((uint8_t)0x05) +#define GPIO_PortSourceGPIOG ((uint8_t)0x06) +#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOE)) + +#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \ + ((PORTSOURCE) == GPIO_PortSourceGPIOG)) + +/** + * @} + */ + +/** @defgroup GPIO_Pin_sources + * @{ + */ + +#define GPIO_PinSource0 ((uint8_t)0x00) +#define GPIO_PinSource1 ((uint8_t)0x01) +#define GPIO_PinSource2 ((uint8_t)0x02) +#define GPIO_PinSource3 ((uint8_t)0x03) +#define GPIO_PinSource4 ((uint8_t)0x04) +#define GPIO_PinSource5 ((uint8_t)0x05) +#define GPIO_PinSource6 ((uint8_t)0x06) +#define GPIO_PinSource7 ((uint8_t)0x07) +#define GPIO_PinSource8 ((uint8_t)0x08) +#define GPIO_PinSource9 ((uint8_t)0x09) +#define GPIO_PinSource10 ((uint8_t)0x0A) +#define GPIO_PinSource11 ((uint8_t)0x0B) +#define GPIO_PinSource12 ((uint8_t)0x0C) +#define GPIO_PinSource13 ((uint8_t)0x0D) +#define GPIO_PinSource14 ((uint8_t)0x0E) +#define GPIO_PinSource15 ((uint8_t)0x0F) + +#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ + ((PINSOURCE) == GPIO_PinSource1) || \ + ((PINSOURCE) == GPIO_PinSource2) || \ + ((PINSOURCE) == GPIO_PinSource3) || \ + ((PINSOURCE) == GPIO_PinSource4) || \ + ((PINSOURCE) == GPIO_PinSource5) || \ + ((PINSOURCE) == GPIO_PinSource6) || \ + ((PINSOURCE) == GPIO_PinSource7) || \ + ((PINSOURCE) == GPIO_PinSource8) || \ + ((PINSOURCE) == GPIO_PinSource9) || \ + ((PINSOURCE) == GPIO_PinSource10) || \ + ((PINSOURCE) == GPIO_PinSource11) || \ + ((PINSOURCE) == GPIO_PinSource12) || \ + ((PINSOURCE) == GPIO_PinSource13) || \ + ((PINSOURCE) == GPIO_PinSource14) || \ + ((PINSOURCE) == GPIO_PinSource15)) + +/** + * @} + */ + +/** @defgroup Ethernet_Media_Interface + * @{ + */ +#define GPIO_ETH_MediaInterface_MII ((u32)0x00000000) +#define GPIO_ETH_MediaInterface_RMII ((u32)0x00000001) + +#define IS_GPIO_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == GPIO_ETH_MediaInterface_MII) || \ + ((INTERFACE) == GPIO_ETH_MediaInterface_RMII)) + +/** + * @} + */ +/** + * @} + */ + +/** @defgroup GPIO_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions + * @{ + */ + +void GPIO_DeInit(GPIO_TypeDef* GPIOx); +void GPIO_AFIODeInit(void); +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx); +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal); +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal); +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); +void GPIO_EventOutputCmd(FunctionalState NewState); +void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState); +void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); +void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_GPIO_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_i2c.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_i2c.h new file mode 100644 index 0000000..60e4b14 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_i2c.h @@ -0,0 +1,684 @@ +/** + ****************************************************************************** + * @file stm32f10x_i2c.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the I2C firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_I2C_H +#define __STM32F10x_I2C_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/** @defgroup I2C_Exported_Types + * @{ + */ + +/** + * @brief I2C Init structure definition + */ + +typedef struct +{ + uint32_t I2C_ClockSpeed; /*!< Specifies the clock frequency. + This parameter must be set to a value lower than 400kHz */ + + uint16_t I2C_Mode; /*!< Specifies the I2C mode. + This parameter can be a value of @ref I2C_mode */ + + uint16_t I2C_DutyCycle; /*!< Specifies the I2C fast mode duty cycle. + This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ + + uint16_t I2C_OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint16_t I2C_Ack; /*!< Enables or disables the acknowledgement. + This parameter can be a value of @ref I2C_acknowledgement */ + + uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged. + This parameter can be a value of @ref I2C_acknowledged_address */ +}I2C_InitTypeDef; + +/** + * @} + */ + + +/** @defgroup I2C_Exported_Constants + * @{ + */ + +#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \ + ((PERIPH) == I2C2)) +/** @defgroup I2C_mode + * @{ + */ + +#define I2C_Mode_I2C ((uint16_t)0x0000) +#define I2C_Mode_SMBusDevice ((uint16_t)0x0002) +#define I2C_Mode_SMBusHost ((uint16_t)0x000A) +#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \ + ((MODE) == I2C_Mode_SMBusDevice) || \ + ((MODE) == I2C_Mode_SMBusHost)) +/** + * @} + */ + +/** @defgroup I2C_duty_cycle_in_fast_mode + * @{ + */ + +#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */ +#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */ +#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \ + ((CYCLE) == I2C_DutyCycle_2)) +/** + * @} + */ + +/** @defgroup I2C_acknowledgement + * @{ + */ + +#define I2C_Ack_Enable ((uint16_t)0x0400) +#define I2C_Ack_Disable ((uint16_t)0x0000) +#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \ + ((STATE) == I2C_Ack_Disable)) +/** + * @} + */ + +/** @defgroup I2C_transfer_direction + * @{ + */ + +#define I2C_Direction_Transmitter ((uint8_t)0x00) +#define I2C_Direction_Receiver ((uint8_t)0x01) +#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \ + ((DIRECTION) == I2C_Direction_Receiver)) +/** + * @} + */ + +/** @defgroup I2C_acknowledged_address + * @{ + */ + +#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000) +#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000) +#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \ + ((ADDRESS) == I2C_AcknowledgedAddress_10bit)) +/** + * @} + */ + +/** @defgroup I2C_registers + * @{ + */ + +#define I2C_Register_CR1 ((uint8_t)0x00) +#define I2C_Register_CR2 ((uint8_t)0x04) +#define I2C_Register_OAR1 ((uint8_t)0x08) +#define I2C_Register_OAR2 ((uint8_t)0x0C) +#define I2C_Register_DR ((uint8_t)0x10) +#define I2C_Register_SR1 ((uint8_t)0x14) +#define I2C_Register_SR2 ((uint8_t)0x18) +#define I2C_Register_CCR ((uint8_t)0x1C) +#define I2C_Register_TRISE ((uint8_t)0x20) +#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \ + ((REGISTER) == I2C_Register_CR2) || \ + ((REGISTER) == I2C_Register_OAR1) || \ + ((REGISTER) == I2C_Register_OAR2) || \ + ((REGISTER) == I2C_Register_DR) || \ + ((REGISTER) == I2C_Register_SR1) || \ + ((REGISTER) == I2C_Register_SR2) || \ + ((REGISTER) == I2C_Register_CCR) || \ + ((REGISTER) == I2C_Register_TRISE)) +/** + * @} + */ + +/** @defgroup I2C_SMBus_alert_pin_level + * @{ + */ + +#define I2C_SMBusAlert_Low ((uint16_t)0x2000) +#define I2C_SMBusAlert_High ((uint16_t)0xDFFF) +#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \ + ((ALERT) == I2C_SMBusAlert_High)) +/** + * @} + */ + +/** @defgroup I2C_PEC_position + * @{ + */ + +#define I2C_PECPosition_Next ((uint16_t)0x0800) +#define I2C_PECPosition_Current ((uint16_t)0xF7FF) +#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \ + ((POSITION) == I2C_PECPosition_Current)) +/** + * @} + */ + +/** @defgroup I2C_NCAK_position + * @{ + */ + +#define I2C_NACKPosition_Next ((uint16_t)0x0800) +#define I2C_NACKPosition_Current ((uint16_t)0xF7FF) +#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \ + ((POSITION) == I2C_NACKPosition_Current)) +/** + * @} + */ + +/** @defgroup I2C_interrupts_definition + * @{ + */ + +#define I2C_IT_BUF ((uint16_t)0x0400) +#define I2C_IT_EVT ((uint16_t)0x0200) +#define I2C_IT_ERR ((uint16_t)0x0100) +#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00)) +/** + * @} + */ + +/** @defgroup I2C_interrupts_definition + * @{ + */ + +#define I2C_IT_SMBALERT ((uint32_t)0x01008000) +#define I2C_IT_TIMEOUT ((uint32_t)0x01004000) +#define I2C_IT_PECERR ((uint32_t)0x01001000) +#define I2C_IT_OVR ((uint32_t)0x01000800) +#define I2C_IT_AF ((uint32_t)0x01000400) +#define I2C_IT_ARLO ((uint32_t)0x01000200) +#define I2C_IT_BERR ((uint32_t)0x01000100) +#define I2C_IT_TXE ((uint32_t)0x06000080) +#define I2C_IT_RXNE ((uint32_t)0x06000040) +#define I2C_IT_STOPF ((uint32_t)0x02000010) +#define I2C_IT_ADD10 ((uint32_t)0x02000008) +#define I2C_IT_BTF ((uint32_t)0x02000004) +#define I2C_IT_ADDR ((uint32_t)0x02000002) +#define I2C_IT_SB ((uint32_t)0x02000001) + +#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00)) + +#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \ + ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \ + ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \ + ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \ + ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \ + ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \ + ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB)) +/** + * @} + */ + +/** @defgroup I2C_flags_definition + * @{ + */ + +/** + * @brief SR2 register flags + */ + +#define I2C_FLAG_DUALF ((uint32_t)0x00800000) +#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000) +#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000) +#define I2C_FLAG_GENCALL ((uint32_t)0x00100000) +#define I2C_FLAG_TRA ((uint32_t)0x00040000) +#define I2C_FLAG_BUSY ((uint32_t)0x00020000) +#define I2C_FLAG_MSL ((uint32_t)0x00010000) + +/** + * @brief SR1 register flags + */ + +#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000) +#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000) +#define I2C_FLAG_PECERR ((uint32_t)0x10001000) +#define I2C_FLAG_OVR ((uint32_t)0x10000800) +#define I2C_FLAG_AF ((uint32_t)0x10000400) +#define I2C_FLAG_ARLO ((uint32_t)0x10000200) +#define I2C_FLAG_BERR ((uint32_t)0x10000100) +#define I2C_FLAG_TXE ((uint32_t)0x10000080) +#define I2C_FLAG_RXNE ((uint32_t)0x10000040) +#define I2C_FLAG_STOPF ((uint32_t)0x10000010) +#define I2C_FLAG_ADD10 ((uint32_t)0x10000008) +#define I2C_FLAG_BTF ((uint32_t)0x10000004) +#define I2C_FLAG_ADDR ((uint32_t)0x10000002) +#define I2C_FLAG_SB ((uint32_t)0x10000001) + +#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00)) + +#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \ + ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \ + ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \ + ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \ + ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \ + ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \ + ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \ + ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \ + ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \ + ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \ + ((FLAG) == I2C_FLAG_SB)) +/** + * @} + */ + +/** @defgroup I2C_Events + * @{ + */ + +/*======================================== + + I2C Master Events (Events grouped in order of communication) + ==========================================*/ +/** + * @brief Communication start + * + * After sending the START condition (I2C_GenerateSTART() function) the master + * has to wait for this event. It means that the Start condition has been correctly + * released on the I2C bus (the bus is free, no other devices is communicating). + * + */ +/* --EV5 */ +#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */ + +/** + * @brief Address Acknowledge + * + * After checking on EV5 (start condition correctly released on the bus), the + * master sends the address of the slave(s) with which it will communicate + * (I2C_Send7bitAddress() function, it also determines the direction of the communication: + * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges + * his address. If an acknowledge is sent on the bus, one of the following events will + * be set: + * + * 1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED + * event is set. + * + * 2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED + * is set + * + * 3) In case of 10-Bit addressing mode, the master (just after generating the START + * and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData() + * function). Then master should wait on EV9. It means that the 10-bit addressing + * header has been correctly sent on the bus. Then master should send the second part of + * the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master + * should wait for event EV6. + * + */ + +/* --EV6 */ +#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */ +#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */ +/* --EV9 */ +#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */ + +/** + * @brief Communication events + * + * If a communication is established (START condition generated and slave address + * acknowledged) then the master has to check on one of the following events for + * communication procedures: + * + * 1) Master Receiver mode: The master has to wait on the event EV7 then to read + * the data received from the slave (I2C_ReceiveData() function). + * + * 2) Master Transmitter mode: The master has to send data (I2C_SendData() + * function) then to wait on event EV8 or EV8_2. + * These two events are similar: + * - EV8 means that the data has been written in the data register and is + * being shifted out. + * - EV8_2 means that the data has been physically shifted out and output + * on the bus. + * In most cases, using EV8 is sufficient for the application. + * Using EV8_2 leads to a slower communication but ensure more reliable test. + * EV8_2 is also more suitable than EV8 for testing on the last data transmission + * (before Stop condition generation). + * + * @note In case the user software does not guarantee that this event EV7 is + * managed before the current byte end of transfer, then user may check on EV7 + * and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)). + * In this case the communication may be slower. + * + */ + +/* Master RECEIVER mode -----------------------------*/ +/* --EV7 */ +#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */ + +/* Master TRANSMITTER mode --------------------------*/ +/* --EV8 */ +#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */ +/* --EV8_2 */ +#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */ + + +/*======================================== + + I2C Slave Events (Events grouped in order of communication) + ==========================================*/ + +/** + * @brief Communication start events + * + * Wait on one of these events at the start of the communication. It means that + * the I2C peripheral detected a Start condition on the bus (generated by master + * device) followed by the peripheral address. The peripheral generates an ACK + * condition on the bus (if the acknowledge feature is enabled through function + * I2C_AcknowledgeConfig()) and the events listed above are set : + * + * 1) In normal case (only one address managed by the slave), when the address + * sent by the master matches the own address of the peripheral (configured by + * I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set + * (where XXX could be TRANSMITTER or RECEIVER). + * + * 2) In case the address sent by the master matches the second address of the + * peripheral (configured by the function I2C_OwnAddress2Config() and enabled + * by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED + * (where XXX could be TRANSMITTER or RECEIVER) are set. + * + * 3) In case the address sent by the master is General Call (address 0x00) and + * if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd()) + * the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED. + * + */ + +/* --EV1 (all the events below are variants of EV1) */ +/* 1) Case of One Single Address managed by the slave */ +#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ + +/* 2) Case of Dual address managed by the slave */ +#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */ + +/* 3) Case of General Call enabled for the slave */ +#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */ + +/** + * @brief Communication events + * + * Wait on one of these events when EV1 has already been checked and: + * + * - Slave RECEIVER mode: + * - EV2: When the application is expecting a data byte to be received. + * - EV4: When the application is expecting the end of the communication: master + * sends a stop condition and data transmission is stopped. + * + * - Slave Transmitter mode: + * - EV3: When a byte has been transmitted by the slave and the application is expecting + * the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and + * I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be + * used when the user software doesn't guarantee the EV3 is managed before the + * current byte end of transfer. + * - EV3_2: When the master sends a NACK in order to tell slave that data transmission + * shall end (before sending the STOP condition). In this case slave has to stop sending + * data bytes and expect a Stop condition on the bus. + * + * @note In case the user software does not guarantee that the event EV2 is + * managed before the current byte end of transfer, then user may check on EV2 + * and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)). + * In this case the communication may be slower. + * + */ + +/* Slave RECEIVER mode --------------------------*/ +/* --EV2 */ +#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */ +/* --EV4 */ +#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */ + +/* Slave TRANSMITTER mode -----------------------*/ +/* --EV3 */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */ +/* --EV3_2 */ +#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */ + +/*=========================== End of Events Description ==========================================*/ + +#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \ + ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \ + ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \ + ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \ + ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \ + ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE)) +/** + * @} + */ + +/** @defgroup I2C_own_address1 + * @{ + */ + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF) +/** + * @} + */ + +/** @defgroup I2C_clock_speed + * @{ + */ + +#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions + * @{ + */ + +void I2C_DeInit(I2C_TypeDef* I2Cx); +void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct); +void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct); +void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address); +void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState); +void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data); +uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx); +void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction); +uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register); +void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition); +void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert); +void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition); +void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState); +uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx); +void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle); + +/** + * @brief + **************************************************************************************** + * + * I2C State Monitoring Functions + * + **************************************************************************************** + * This I2C driver provides three different ways for I2C state monitoring + * depending on the application requirements and constraints: + * + * + * 1) Basic state monitoring: + * Using I2C_CheckEvent() function: + * It compares the status registers (SR1 and SR2) content to a given event + * (can be the combination of one or more flags). + * It returns SUCCESS if the current status includes the given flags + * and returns ERROR if one or more flags are missing in the current status. + * - When to use: + * - This function is suitable for most applications as well as for startup + * activity since the events are fully described in the product reference manual + * (RM0008). + * - It is also suitable for users who need to define their own events. + * - Limitations: + * - If an error occurs (ie. error flags are set besides to the monitored flags), + * the I2C_CheckEvent() function may return SUCCESS despite the communication + * hold or corrupted real state. + * In this case, it is advised to use error interrupts to monitor the error + * events and handle them in the interrupt IRQ handler. + * + * @note + * For error management, it is advised to use the following functions: + * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR). + * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs. + * Where x is the peripheral instance (I2C1, I2C2 ...) + * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler() + * in order to determine which error occurred. + * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd() + * and/or I2C_GenerateStop() in order to clear the error flag and source, + * and return to correct communication status. + * + * + * 2) Advanced state monitoring: + * Using the function I2C_GetLastEvent() which returns the image of both status + * registers in a single word (uint32_t) (Status Register 2 value is shifted left + * by 16 bits and concatenated to Status Register 1). + * - When to use: + * - This function is suitable for the same applications above but it allows to + * overcome the limitations of I2C_GetFlagStatus() function (see below). + * The returned value could be compared to events already defined in the + * library (stm32f10x_i2c.h) or to custom values defined by user. + * - This function is suitable when multiple flags are monitored at the same time. + * - At the opposite of I2C_CheckEvent() function, this function allows user to + * choose when an event is accepted (when all events flags are set and no + * other flags are set or just when the needed flags are set like + * I2C_CheckEvent() function). + * - Limitations: + * - User may need to define his own events. + * - Same remark concerning the error management is applicable for this + * function if user decides to check only regular communication flags (and + * ignores error flags). + * + * + * 3) Flag-based state monitoring: + * Using the function I2C_GetFlagStatus() which simply returns the status of + * one single flag (ie. I2C_FLAG_RXNE ...). + * - When to use: + * - This function could be used for specific applications or in debug phase. + * - It is suitable when only one flag checking is needed (most I2C events + * are monitored through multiple flags). + * - Limitations: + * - When calling this function, the Status register is accessed. Some flags are + * cleared when the status register is accessed. So checking the status + * of one Flag, may clear other ones. + * - Function may need to be called twice or more in order to monitor one + * single event. + * + */ + +/** + * + * 1) Basic state monitoring + ******************************************************************************* + */ +ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT); +/** + * + * 2) Advanced state monitoring + ******************************************************************************* + */ +uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx); +/** + * + * 3) Flag-based state monitoring + ******************************************************************************* + */ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); +/** + * + ******************************************************************************* + */ + +void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); +ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT); +void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_I2C_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_iwdg.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_iwdg.h new file mode 100644 index 0000000..25b0bb5 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_iwdg.h @@ -0,0 +1,140 @@ +/** + ****************************************************************************** + * @file stm32f10x_iwdg.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the IWDG + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_IWDG_H +#define __STM32F10x_IWDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup IWDG + * @{ + */ + +/** @defgroup IWDG_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Exported_Constants + * @{ + */ + +/** @defgroup IWDG_WriteAccess + * @{ + */ + +#define IWDG_WriteAccess_Enable ((uint16_t)0x5555) +#define IWDG_WriteAccess_Disable ((uint16_t)0x0000) +#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \ + ((ACCESS) == IWDG_WriteAccess_Disable)) +/** + * @} + */ + +/** @defgroup IWDG_prescaler + * @{ + */ + +#define IWDG_Prescaler_4 ((uint8_t)0x00) +#define IWDG_Prescaler_8 ((uint8_t)0x01) +#define IWDG_Prescaler_16 ((uint8_t)0x02) +#define IWDG_Prescaler_32 ((uint8_t)0x03) +#define IWDG_Prescaler_64 ((uint8_t)0x04) +#define IWDG_Prescaler_128 ((uint8_t)0x05) +#define IWDG_Prescaler_256 ((uint8_t)0x06) +#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \ + ((PRESCALER) == IWDG_Prescaler_8) || \ + ((PRESCALER) == IWDG_Prescaler_16) || \ + ((PRESCALER) == IWDG_Prescaler_32) || \ + ((PRESCALER) == IWDG_Prescaler_64) || \ + ((PRESCALER) == IWDG_Prescaler_128)|| \ + ((PRESCALER) == IWDG_Prescaler_256)) +/** + * @} + */ + +/** @defgroup IWDG_Flag + * @{ + */ + +#define IWDG_FLAG_PVU ((uint16_t)0x0001) +#define IWDG_FLAG_RVU ((uint16_t)0x0002) +#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU)) +#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup IWDG_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Exported_Functions + * @{ + */ + +void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess); +void IWDG_SetPrescaler(uint8_t IWDG_Prescaler); +void IWDG_SetReload(uint16_t Reload); +void IWDG_ReloadCounter(void); +void IWDG_Enable(void); +FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_IWDG_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_pwr.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_pwr.h new file mode 100644 index 0000000..1c025e2 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_pwr.h @@ -0,0 +1,156 @@ +/** + ****************************************************************************** + * @file stm32f10x_pwr.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the PWR firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_PWR_H +#define __STM32F10x_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/** @defgroup PWR_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Exported_Constants + * @{ + */ + +/** @defgroup PVD_detection_level + * @{ + */ + +#define PWR_PVDLevel_2V2 ((uint32_t)0x00000000) +#define PWR_PVDLevel_2V3 ((uint32_t)0x00000020) +#define PWR_PVDLevel_2V4 ((uint32_t)0x00000040) +#define PWR_PVDLevel_2V5 ((uint32_t)0x00000060) +#define PWR_PVDLevel_2V6 ((uint32_t)0x00000080) +#define PWR_PVDLevel_2V7 ((uint32_t)0x000000A0) +#define PWR_PVDLevel_2V8 ((uint32_t)0x000000C0) +#define PWR_PVDLevel_2V9 ((uint32_t)0x000000E0) +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \ + ((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \ + ((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \ + ((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9)) +/** + * @} + */ + +/** @defgroup Regulator_state_is_STOP_mode + * @{ + */ + +#define PWR_Regulator_ON ((uint32_t)0x00000000) +#define PWR_Regulator_LowPower ((uint32_t)0x00000001) +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \ + ((REGULATOR) == PWR_Regulator_LowPower)) +/** + * @} + */ + +/** @defgroup STOP_mode_entry + * @{ + */ + +#define PWR_STOPEntry_WFI ((uint8_t)0x01) +#define PWR_STOPEntry_WFE ((uint8_t)0x02) +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE)) + +/** + * @} + */ + +/** @defgroup PWR_Flag + * @{ + */ + +#define PWR_FLAG_WU ((uint32_t)0x00000001) +#define PWR_FLAG_SB ((uint32_t)0x00000002) +#define PWR_FLAG_PVDO ((uint32_t)0x00000004) +#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ + ((FLAG) == PWR_FLAG_PVDO)) + +#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup PWR_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions + * @{ + */ + +void PWR_DeInit(void); +void PWR_BackupAccessCmd(FunctionalState NewState); +void PWR_PVDCmd(FunctionalState NewState); +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); +void PWR_WakeUpPinCmd(FunctionalState NewState); +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); +void PWR_EnterSTANDBYMode(void); +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG); +void PWR_ClearFlag(uint32_t PWR_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_PWR_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_rcc.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_rcc.h new file mode 100644 index 0000000..1149c34 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_rcc.h @@ -0,0 +1,727 @@ +/** + ****************************************************************************** + * @file stm32f10x_rcc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the RCC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_RCC_H +#define __STM32F10x_RCC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/** @defgroup RCC_Exported_Types + * @{ + */ + +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< returns SYSCLK clock frequency expressed in Hz */ + uint32_t HCLK_Frequency; /*!< returns HCLK clock frequency expressed in Hz */ + uint32_t PCLK1_Frequency; /*!< returns PCLK1 clock frequency expressed in Hz */ + uint32_t PCLK2_Frequency; /*!< returns PCLK2 clock frequency expressed in Hz */ + uint32_t ADCCLK_Frequency; /*!< returns ADCCLK clock frequency expressed in Hz */ +}RCC_ClocksTypeDef; + +/** + * @} + */ + +/** @defgroup RCC_Exported_Constants + * @{ + */ + +/** @defgroup HSE_configuration + * @{ + */ + +#define RCC_HSE_OFF ((uint32_t)0x00000000) +#define RCC_HSE_ON ((uint32_t)0x00010000) +#define RCC_HSE_Bypass ((uint32_t)0x00040000) +#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ + ((HSE) == RCC_HSE_Bypass)) + +/** + * @} + */ + +/** @defgroup PLL_entry_clock_source + * @{ + */ + +#define RCC_PLLSource_HSI_Div2 ((uint32_t)0x00000000) + +#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_CL) + #define RCC_PLLSource_HSE_Div1 ((uint32_t)0x00010000) + #define RCC_PLLSource_HSE_Div2 ((uint32_t)0x00030000) + #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ + ((SOURCE) == RCC_PLLSource_HSE_Div1) || \ + ((SOURCE) == RCC_PLLSource_HSE_Div2)) +#else + #define RCC_PLLSource_PREDIV1 ((uint32_t)0x00010000) + #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ + ((SOURCE) == RCC_PLLSource_PREDIV1)) +#endif /* STM32F10X_CL */ + +/** + * @} + */ + +/** @defgroup PLL_multiplication_factor + * @{ + */ +#ifndef STM32F10X_CL + #define RCC_PLLMul_2 ((uint32_t)0x00000000) + #define RCC_PLLMul_3 ((uint32_t)0x00040000) + #define RCC_PLLMul_4 ((uint32_t)0x00080000) + #define RCC_PLLMul_5 ((uint32_t)0x000C0000) + #define RCC_PLLMul_6 ((uint32_t)0x00100000) + #define RCC_PLLMul_7 ((uint32_t)0x00140000) + #define RCC_PLLMul_8 ((uint32_t)0x00180000) + #define RCC_PLLMul_9 ((uint32_t)0x001C0000) + #define RCC_PLLMul_10 ((uint32_t)0x00200000) + #define RCC_PLLMul_11 ((uint32_t)0x00240000) + #define RCC_PLLMul_12 ((uint32_t)0x00280000) + #define RCC_PLLMul_13 ((uint32_t)0x002C0000) + #define RCC_PLLMul_14 ((uint32_t)0x00300000) + #define RCC_PLLMul_15 ((uint32_t)0x00340000) + #define RCC_PLLMul_16 ((uint32_t)0x00380000) + #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \ + ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ + ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ + ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ + ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \ + ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \ + ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \ + ((MUL) == RCC_PLLMul_16)) + +#else + #define RCC_PLLMul_4 ((uint32_t)0x00080000) + #define RCC_PLLMul_5 ((uint32_t)0x000C0000) + #define RCC_PLLMul_6 ((uint32_t)0x00100000) + #define RCC_PLLMul_7 ((uint32_t)0x00140000) + #define RCC_PLLMul_8 ((uint32_t)0x00180000) + #define RCC_PLLMul_9 ((uint32_t)0x001C0000) + #define RCC_PLLMul_6_5 ((uint32_t)0x00340000) + + #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ + ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ + ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ + ((MUL) == RCC_PLLMul_6_5)) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup PREDIV1_division_factor + * @{ + */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + #define RCC_PREDIV1_Div1 ((uint32_t)0x00000000) + #define RCC_PREDIV1_Div2 ((uint32_t)0x00000001) + #define RCC_PREDIV1_Div3 ((uint32_t)0x00000002) + #define RCC_PREDIV1_Div4 ((uint32_t)0x00000003) + #define RCC_PREDIV1_Div5 ((uint32_t)0x00000004) + #define RCC_PREDIV1_Div6 ((uint32_t)0x00000005) + #define RCC_PREDIV1_Div7 ((uint32_t)0x00000006) + #define RCC_PREDIV1_Div8 ((uint32_t)0x00000007) + #define RCC_PREDIV1_Div9 ((uint32_t)0x00000008) + #define RCC_PREDIV1_Div10 ((uint32_t)0x00000009) + #define RCC_PREDIV1_Div11 ((uint32_t)0x0000000A) + #define RCC_PREDIV1_Div12 ((uint32_t)0x0000000B) + #define RCC_PREDIV1_Div13 ((uint32_t)0x0000000C) + #define RCC_PREDIV1_Div14 ((uint32_t)0x0000000D) + #define RCC_PREDIV1_Div15 ((uint32_t)0x0000000E) + #define RCC_PREDIV1_Div16 ((uint32_t)0x0000000F) + + #define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \ + ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \ + ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \ + ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \ + ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \ + ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \ + ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \ + ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16)) +#endif +/** + * @} + */ + + +/** @defgroup PREDIV1_clock_source + * @{ + */ +#ifdef STM32F10X_CL +/* PREDIV1 clock source (for STM32 connectivity line devices) */ + #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) + #define RCC_PREDIV1_Source_PLL2 ((uint32_t)0x00010000) + + #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE) || \ + ((SOURCE) == RCC_PREDIV1_Source_PLL2)) +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/* PREDIV1 clock source (for STM32 Value line devices) */ + #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) + + #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE)) +#endif +/** + * @} + */ + +#ifdef STM32F10X_CL +/** @defgroup PREDIV2_division_factor + * @{ + */ + + #define RCC_PREDIV2_Div1 ((uint32_t)0x00000000) + #define RCC_PREDIV2_Div2 ((uint32_t)0x00000010) + #define RCC_PREDIV2_Div3 ((uint32_t)0x00000020) + #define RCC_PREDIV2_Div4 ((uint32_t)0x00000030) + #define RCC_PREDIV2_Div5 ((uint32_t)0x00000040) + #define RCC_PREDIV2_Div6 ((uint32_t)0x00000050) + #define RCC_PREDIV2_Div7 ((uint32_t)0x00000060) + #define RCC_PREDIV2_Div8 ((uint32_t)0x00000070) + #define RCC_PREDIV2_Div9 ((uint32_t)0x00000080) + #define RCC_PREDIV2_Div10 ((uint32_t)0x00000090) + #define RCC_PREDIV2_Div11 ((uint32_t)0x000000A0) + #define RCC_PREDIV2_Div12 ((uint32_t)0x000000B0) + #define RCC_PREDIV2_Div13 ((uint32_t)0x000000C0) + #define RCC_PREDIV2_Div14 ((uint32_t)0x000000D0) + #define RCC_PREDIV2_Div15 ((uint32_t)0x000000E0) + #define RCC_PREDIV2_Div16 ((uint32_t)0x000000F0) + + #define IS_RCC_PREDIV2(PREDIV2) (((PREDIV2) == RCC_PREDIV2_Div1) || ((PREDIV2) == RCC_PREDIV2_Div2) || \ + ((PREDIV2) == RCC_PREDIV2_Div3) || ((PREDIV2) == RCC_PREDIV2_Div4) || \ + ((PREDIV2) == RCC_PREDIV2_Div5) || ((PREDIV2) == RCC_PREDIV2_Div6) || \ + ((PREDIV2) == RCC_PREDIV2_Div7) || ((PREDIV2) == RCC_PREDIV2_Div8) || \ + ((PREDIV2) == RCC_PREDIV2_Div9) || ((PREDIV2) == RCC_PREDIV2_Div10) || \ + ((PREDIV2) == RCC_PREDIV2_Div11) || ((PREDIV2) == RCC_PREDIV2_Div12) || \ + ((PREDIV2) == RCC_PREDIV2_Div13) || ((PREDIV2) == RCC_PREDIV2_Div14) || \ + ((PREDIV2) == RCC_PREDIV2_Div15) || ((PREDIV2) == RCC_PREDIV2_Div16)) +/** + * @} + */ + + +/** @defgroup PLL2_multiplication_factor + * @{ + */ + + #define RCC_PLL2Mul_8 ((uint32_t)0x00000600) + #define RCC_PLL2Mul_9 ((uint32_t)0x00000700) + #define RCC_PLL2Mul_10 ((uint32_t)0x00000800) + #define RCC_PLL2Mul_11 ((uint32_t)0x00000900) + #define RCC_PLL2Mul_12 ((uint32_t)0x00000A00) + #define RCC_PLL2Mul_13 ((uint32_t)0x00000B00) + #define RCC_PLL2Mul_14 ((uint32_t)0x00000C00) + #define RCC_PLL2Mul_16 ((uint32_t)0x00000E00) + #define RCC_PLL2Mul_20 ((uint32_t)0x00000F00) + + #define IS_RCC_PLL2_MUL(MUL) (((MUL) == RCC_PLL2Mul_8) || ((MUL) == RCC_PLL2Mul_9) || \ + ((MUL) == RCC_PLL2Mul_10) || ((MUL) == RCC_PLL2Mul_11) || \ + ((MUL) == RCC_PLL2Mul_12) || ((MUL) == RCC_PLL2Mul_13) || \ + ((MUL) == RCC_PLL2Mul_14) || ((MUL) == RCC_PLL2Mul_16) || \ + ((MUL) == RCC_PLL2Mul_20)) +/** + * @} + */ + + +/** @defgroup PLL3_multiplication_factor + * @{ + */ + + #define RCC_PLL3Mul_8 ((uint32_t)0x00006000) + #define RCC_PLL3Mul_9 ((uint32_t)0x00007000) + #define RCC_PLL3Mul_10 ((uint32_t)0x00008000) + #define RCC_PLL3Mul_11 ((uint32_t)0x00009000) + #define RCC_PLL3Mul_12 ((uint32_t)0x0000A000) + #define RCC_PLL3Mul_13 ((uint32_t)0x0000B000) + #define RCC_PLL3Mul_14 ((uint32_t)0x0000C000) + #define RCC_PLL3Mul_16 ((uint32_t)0x0000E000) + #define RCC_PLL3Mul_20 ((uint32_t)0x0000F000) + + #define IS_RCC_PLL3_MUL(MUL) (((MUL) == RCC_PLL3Mul_8) || ((MUL) == RCC_PLL3Mul_9) || \ + ((MUL) == RCC_PLL3Mul_10) || ((MUL) == RCC_PLL3Mul_11) || \ + ((MUL) == RCC_PLL3Mul_12) || ((MUL) == RCC_PLL3Mul_13) || \ + ((MUL) == RCC_PLL3Mul_14) || ((MUL) == RCC_PLL3Mul_16) || \ + ((MUL) == RCC_PLL3Mul_20)) +/** + * @} + */ + +#endif /* STM32F10X_CL */ + + +/** @defgroup System_clock_source + * @{ + */ + +#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000) +#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001) +#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002) +#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \ + ((SOURCE) == RCC_SYSCLKSource_HSE) || \ + ((SOURCE) == RCC_SYSCLKSource_PLLCLK)) +/** + * @} + */ + +/** @defgroup AHB_clock_source + * @{ + */ + +#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000) +#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080) +#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090) +#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0) +#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0) +#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0) +#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0) +#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0) +#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0) +#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \ + ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \ + ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \ + ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \ + ((HCLK) == RCC_SYSCLK_Div512)) +/** + * @} + */ + +/** @defgroup APB1_APB2_clock_source + * @{ + */ + +#define RCC_HCLK_Div1 ((uint32_t)0x00000000) +#define RCC_HCLK_Div2 ((uint32_t)0x00000400) +#define RCC_HCLK_Div4 ((uint32_t)0x00000500) +#define RCC_HCLK_Div8 ((uint32_t)0x00000600) +#define RCC_HCLK_Div16 ((uint32_t)0x00000700) +#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \ + ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \ + ((PCLK) == RCC_HCLK_Div16)) +/** + * @} + */ + +/** @defgroup RCC_Interrupt_source + * @{ + */ + +#define RCC_IT_LSIRDY ((uint8_t)0x01) +#define RCC_IT_LSERDY ((uint8_t)0x02) +#define RCC_IT_HSIRDY ((uint8_t)0x04) +#define RCC_IT_HSERDY ((uint8_t)0x08) +#define RCC_IT_PLLRDY ((uint8_t)0x10) +#define RCC_IT_CSS ((uint8_t)0x80) + +#ifndef STM32F10X_CL + #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xE0) == 0x00) && ((IT) != 0x00)) + #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ + ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ + ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS)) + #define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x60) == 0x00) && ((IT) != 0x00)) +#else + #define RCC_IT_PLL2RDY ((uint8_t)0x20) + #define RCC_IT_PLL3RDY ((uint8_t)0x40) + #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00)) + #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ + ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ + ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \ + ((IT) == RCC_IT_PLL2RDY) || ((IT) == RCC_IT_PLL3RDY)) + #define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00) +#endif /* STM32F10X_CL */ + + +/** + * @} + */ + +#ifndef STM32F10X_CL +/** @defgroup USB_Device_clock_source + * @{ + */ + + #define RCC_USBCLKSource_PLLCLK_1Div5 ((uint8_t)0x00) + #define RCC_USBCLKSource_PLLCLK_Div1 ((uint8_t)0x01) + + #define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \ + ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1)) +/** + * @} + */ +#else +/** @defgroup USB_OTG_FS_clock_source + * @{ + */ + #define RCC_OTGFSCLKSource_PLLVCO_Div3 ((uint8_t)0x00) + #define RCC_OTGFSCLKSource_PLLVCO_Div2 ((uint8_t)0x01) + + #define IS_RCC_OTGFSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div3) || \ + ((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div2)) +/** + * @} + */ +#endif /* STM32F10X_CL */ + + +#ifdef STM32F10X_CL +/** @defgroup I2S2_clock_source + * @{ + */ + #define RCC_I2S2CLKSource_SYSCLK ((uint8_t)0x00) + #define RCC_I2S2CLKSource_PLL3_VCO ((uint8_t)0x01) + + #define IS_RCC_I2S2CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || \ + ((SOURCE) == RCC_I2S2CLKSource_PLL3_VCO)) +/** + * @} + */ + +/** @defgroup I2S3_clock_source + * @{ + */ + #define RCC_I2S3CLKSource_SYSCLK ((uint8_t)0x00) + #define RCC_I2S3CLKSource_PLL3_VCO ((uint8_t)0x01) + + #define IS_RCC_I2S3CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S3CLKSource_SYSCLK) || \ + ((SOURCE) == RCC_I2S3CLKSource_PLL3_VCO)) +/** + * @} + */ +#endif /* STM32F10X_CL */ + + +/** @defgroup ADC_clock_source + * @{ + */ + +#define RCC_PCLK2_Div2 ((uint32_t)0x00000000) +#define RCC_PCLK2_Div4 ((uint32_t)0x00004000) +#define RCC_PCLK2_Div6 ((uint32_t)0x00008000) +#define RCC_PCLK2_Div8 ((uint32_t)0x0000C000) +#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \ + ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8)) +/** + * @} + */ + +/** @defgroup LSE_configuration + * @{ + */ + +#define RCC_LSE_OFF ((uint8_t)0x00) +#define RCC_LSE_ON ((uint8_t)0x01) +#define RCC_LSE_Bypass ((uint8_t)0x04) +#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ + ((LSE) == RCC_LSE_Bypass)) +/** + * @} + */ + +/** @defgroup RTC_clock_source + * @{ + */ + +#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100) +#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200) +#define RCC_RTCCLKSource_HSE_Div128 ((uint32_t)0x00000300) +#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \ + ((SOURCE) == RCC_RTCCLKSource_LSI) || \ + ((SOURCE) == RCC_RTCCLKSource_HSE_Div128)) +/** + * @} + */ + +/** @defgroup AHB_peripheral + * @{ + */ + +#define RCC_AHBPeriph_DMA1 ((uint32_t)0x00000001) +#define RCC_AHBPeriph_DMA2 ((uint32_t)0x00000002) +#define RCC_AHBPeriph_SRAM ((uint32_t)0x00000004) +#define RCC_AHBPeriph_FLITF ((uint32_t)0x00000010) +#define RCC_AHBPeriph_CRC ((uint32_t)0x00000040) + +#ifndef STM32F10X_CL + #define RCC_AHBPeriph_FSMC ((uint32_t)0x00000100) + #define RCC_AHBPeriph_SDIO ((uint32_t)0x00000400) + #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00)) +#else + #define RCC_AHBPeriph_OTG_FS ((uint32_t)0x00001000) + #define RCC_AHBPeriph_ETH_MAC ((uint32_t)0x00004000) + #define RCC_AHBPeriph_ETH_MAC_Tx ((uint32_t)0x00008000) + #define RCC_AHBPeriph_ETH_MAC_Rx ((uint32_t)0x00010000) + + #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFE2FA8) == 0x00) && ((PERIPH) != 0x00)) + #define IS_RCC_AHB_PERIPH_RESET(PERIPH) ((((PERIPH) & 0xFFFFAFFF) == 0x00) && ((PERIPH) != 0x00)) +#endif /* STM32F10X_CL */ +/** + * @} + */ + +/** @defgroup APB2_peripheral + * @{ + */ + +#define RCC_APB2Periph_AFIO ((uint32_t)0x00000001) +#define RCC_APB2Periph_GPIOA ((uint32_t)0x00000004) +#define RCC_APB2Periph_GPIOB ((uint32_t)0x00000008) +#define RCC_APB2Periph_GPIOC ((uint32_t)0x00000010) +#define RCC_APB2Periph_GPIOD ((uint32_t)0x00000020) +#define RCC_APB2Periph_GPIOE ((uint32_t)0x00000040) +#define RCC_APB2Periph_GPIOF ((uint32_t)0x00000080) +#define RCC_APB2Periph_GPIOG ((uint32_t)0x00000100) +#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000200) +#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000400) +#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000800) +#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000) +#define RCC_APB2Periph_TIM8 ((uint32_t)0x00002000) +#define RCC_APB2Periph_USART1 ((uint32_t)0x00004000) +#define RCC_APB2Periph_ADC3 ((uint32_t)0x00008000) +#define RCC_APB2Periph_TIM15 ((uint32_t)0x00010000) +#define RCC_APB2Periph_TIM16 ((uint32_t)0x00020000) +#define RCC_APB2Periph_TIM17 ((uint32_t)0x00040000) +#define RCC_APB2Periph_TIM9 ((uint32_t)0x00080000) +#define RCC_APB2Periph_TIM10 ((uint32_t)0x00100000) +#define RCC_APB2Periph_TIM11 ((uint32_t)0x00200000) + +#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFC00002) == 0x00) && ((PERIPH) != 0x00)) +/** + * @} + */ + +/** @defgroup APB1_peripheral + * @{ + */ + +#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001) +#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002) +#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004) +#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008) +#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010) +#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020) +#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040) +#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080) +#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100) +#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800) +#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000) +#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000) +#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000) +#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000) +#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000) +#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000) +#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000) +#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000) +#define RCC_APB1Periph_USB ((uint32_t)0x00800000) +#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000) +#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000) +#define RCC_APB1Periph_BKP ((uint32_t)0x08000000) +#define RCC_APB1Periph_PWR ((uint32_t)0x10000000) +#define RCC_APB1Periph_DAC ((uint32_t)0x20000000) +#define RCC_APB1Periph_CEC ((uint32_t)0x40000000) + +#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x81013600) == 0x00) && ((PERIPH) != 0x00)) + +/** + * @} + */ + +/** @defgroup Clock_source_to_output_on_MCO_pin + * @{ + */ + +#define RCC_MCO_NoClock ((uint8_t)0x00) +#define RCC_MCO_SYSCLK ((uint8_t)0x04) +#define RCC_MCO_HSI ((uint8_t)0x05) +#define RCC_MCO_HSE ((uint8_t)0x06) +#define RCC_MCO_PLLCLK_Div2 ((uint8_t)0x07) + +#ifndef STM32F10X_CL + #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ + ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ + ((MCO) == RCC_MCO_PLLCLK_Div2)) +#else + #define RCC_MCO_PLL2CLK ((uint8_t)0x08) + #define RCC_MCO_PLL3CLK_Div2 ((uint8_t)0x09) + #define RCC_MCO_XT1 ((uint8_t)0x0A) + #define RCC_MCO_PLL3CLK ((uint8_t)0x0B) + + #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ + ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ + ((MCO) == RCC_MCO_PLLCLK_Div2) || ((MCO) == RCC_MCO_PLL2CLK) || \ + ((MCO) == RCC_MCO_PLL3CLK_Div2) || ((MCO) == RCC_MCO_XT1) || \ + ((MCO) == RCC_MCO_PLL3CLK)) +#endif /* STM32F10X_CL */ + +/** + * @} + */ + +/** @defgroup RCC_Flag + * @{ + */ + +#define RCC_FLAG_HSIRDY ((uint8_t)0x21) +#define RCC_FLAG_HSERDY ((uint8_t)0x31) +#define RCC_FLAG_PLLRDY ((uint8_t)0x39) +#define RCC_FLAG_LSERDY ((uint8_t)0x41) +#define RCC_FLAG_LSIRDY ((uint8_t)0x61) +#define RCC_FLAG_PINRST ((uint8_t)0x7A) +#define RCC_FLAG_PORRST ((uint8_t)0x7B) +#define RCC_FLAG_SFTRST ((uint8_t)0x7C) +#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) +#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) +#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) + +#ifndef STM32F10X_CL + #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ + ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ + ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ + ((FLAG) == RCC_FLAG_LPWRRST)) +#else + #define RCC_FLAG_PLL2RDY ((uint8_t)0x3B) + #define RCC_FLAG_PLL3RDY ((uint8_t)0x3D) + #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_PLL2RDY) || ((FLAG) == RCC_FLAG_PLL3RDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ + ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ + ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ + ((FLAG) == RCC_FLAG_LPWRRST)) +#endif /* STM32F10X_CL */ + +#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RCC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions + * @{ + */ + +void RCC_DeInit(void); +void RCC_HSEConfig(uint32_t RCC_HSE); +ErrorStatus RCC_WaitForHSEStartUp(void); +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue); +void RCC_HSICmd(FunctionalState NewState); +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul); +void RCC_PLLCmd(FunctionalState NewState); + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div); +#endif + +#ifdef STM32F10X_CL + void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div); + void RCC_PLL2Config(uint32_t RCC_PLL2Mul); + void RCC_PLL2Cmd(FunctionalState NewState); + void RCC_PLL3Config(uint32_t RCC_PLL3Mul); + void RCC_PLL3Cmd(FunctionalState NewState); +#endif /* STM32F10X_CL */ + +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource); +uint8_t RCC_GetSYSCLKSource(void); +void RCC_HCLKConfig(uint32_t RCC_SYSCLK); +void RCC_PCLK1Config(uint32_t RCC_HCLK); +void RCC_PCLK2Config(uint32_t RCC_HCLK); +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState); + +#ifndef STM32F10X_CL + void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource); +#else + void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource); +#endif /* STM32F10X_CL */ + +void RCC_ADCCLKConfig(uint32_t RCC_PCLK2); + +#ifdef STM32F10X_CL + void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource); + void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource); +#endif /* STM32F10X_CL */ + +void RCC_LSEConfig(uint8_t RCC_LSE); +void RCC_LSICmd(FunctionalState NewState); +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource); +void RCC_RTCCLKCmd(FunctionalState NewState); +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks); +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); + +#ifdef STM32F10X_CL +void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); +#endif /* STM32F10X_CL */ + +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); +void RCC_BackupResetCmd(FunctionalState NewState); +void RCC_ClockSecuritySystemCmd(FunctionalState NewState); +void RCC_MCOConfig(uint8_t RCC_MCO); +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG); +void RCC_ClearFlag(void); +ITStatus RCC_GetITStatus(uint8_t RCC_IT); +void RCC_ClearITPendingBit(uint8_t RCC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_RCC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_rtc.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_rtc.h new file mode 100644 index 0000000..fd8beb5 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_rtc.h @@ -0,0 +1,135 @@ +/** + ****************************************************************************** + * @file stm32f10x_rtc.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the RTC firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_RTC_H +#define __STM32F10x_RTC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RTC + * @{ + */ + +/** @defgroup RTC_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Constants + * @{ + */ + +/** @defgroup RTC_interrupts_define + * @{ + */ + +#define RTC_IT_OW ((uint16_t)0x0004) /*!< Overflow interrupt */ +#define RTC_IT_ALR ((uint16_t)0x0002) /*!< Alarm interrupt */ +#define RTC_IT_SEC ((uint16_t)0x0001) /*!< Second interrupt */ +#define IS_RTC_IT(IT) ((((IT) & (uint16_t)0xFFF8) == 0x00) && ((IT) != 0x00)) +#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_OW) || ((IT) == RTC_IT_ALR) || \ + ((IT) == RTC_IT_SEC)) +/** + * @} + */ + +/** @defgroup RTC_interrupts_flags + * @{ + */ + +#define RTC_FLAG_RTOFF ((uint16_t)0x0020) /*!< RTC Operation OFF flag */ +#define RTC_FLAG_RSF ((uint16_t)0x0008) /*!< Registers Synchronized flag */ +#define RTC_FLAG_OW ((uint16_t)0x0004) /*!< Overflow flag */ +#define RTC_FLAG_ALR ((uint16_t)0x0002) /*!< Alarm flag */ +#define RTC_FLAG_SEC ((uint16_t)0x0001) /*!< Second flag */ +#define IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFF0) == 0x00) && ((FLAG) != 0x00)) +#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RTOFF) || ((FLAG) == RTC_FLAG_RSF) || \ + ((FLAG) == RTC_FLAG_OW) || ((FLAG) == RTC_FLAG_ALR) || \ + ((FLAG) == RTC_FLAG_SEC)) +#define IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions + * @{ + */ + +void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState); +void RTC_EnterConfigMode(void); +void RTC_ExitConfigMode(void); +uint32_t RTC_GetCounter(void); +void RTC_SetCounter(uint32_t CounterValue); +void RTC_SetPrescaler(uint32_t PrescalerValue); +void RTC_SetAlarm(uint32_t AlarmValue); +uint32_t RTC_GetDivider(void); +void RTC_WaitForLastTask(void); +void RTC_WaitForSynchro(void); +FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG); +void RTC_ClearFlag(uint16_t RTC_FLAG); +ITStatus RTC_GetITStatus(uint16_t RTC_IT); +void RTC_ClearITPendingBit(uint16_t RTC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_RTC_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_sdio.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_sdio.h new file mode 100644 index 0000000..81c058a --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_sdio.h @@ -0,0 +1,531 @@ +/** + ****************************************************************************** + * @file stm32f10x_sdio.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the SDIO firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_SDIO_H +#define __STM32F10x_SDIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SDIO + * @{ + */ + +/** @defgroup SDIO_Exported_Types + * @{ + */ + +typedef struct +{ + uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SDIO_Clock_Edge */ + + uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is + enabled or disabled. + This parameter can be a value of @ref SDIO_Clock_Bypass */ + + uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or + disabled when the bus is idle. + This parameter can be a value of @ref SDIO_Clock_Power_Save */ + + uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width. + This parameter can be a value of @ref SDIO_Bus_Wide */ + + uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. + This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ + + uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. + This parameter can be a value between 0x00 and 0xFF. */ + +} SDIO_InitTypeDef; + +typedef struct +{ + uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent + to a card as part of a command message. If a command + contains an argument, it must be loaded into this register + before writing the command to the command register */ + + uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */ + + uint32_t SDIO_Response; /*!< Specifies the SDIO response type. + This parameter can be a value of @ref SDIO_Response_Type */ + + uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled. + This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ + + uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_CPSM_State */ +} SDIO_CmdInitTypeDef; + +typedef struct +{ + uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ + + uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */ + + uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer. + This parameter can be a value of @ref SDIO_Data_Block_Size */ + + uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer + is a read or write. + This parameter can be a value of @ref SDIO_Transfer_Direction */ + + uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode. + This parameter can be a value of @ref SDIO_Transfer_Type */ + + uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_DPSM_State */ +} SDIO_DataInitTypeDef; + +/** + * @} + */ + +/** @defgroup SDIO_Exported_Constants + * @{ + */ + +/** @defgroup SDIO_Clock_Edge + * @{ + */ + +#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000) +#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000) +#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \ + ((EDGE) == SDIO_ClockEdge_Falling)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Bypass + * @{ + */ + +#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000) +#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400) +#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \ + ((BYPASS) == SDIO_ClockBypass_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Power_Save + * @{ + */ + +#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000) +#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200) +#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \ + ((SAVE) == SDIO_ClockPowerSave_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Bus_Wide + * @{ + */ + +#define SDIO_BusWide_1b ((uint32_t)0x00000000) +#define SDIO_BusWide_4b ((uint32_t)0x00000800) +#define SDIO_BusWide_8b ((uint32_t)0x00001000) +#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \ + ((WIDE) == SDIO_BusWide_8b)) + +/** + * @} + */ + +/** @defgroup SDIO_Hardware_Flow_Control + * @{ + */ + +#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000) +#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000) +#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \ + ((CONTROL) == SDIO_HardwareFlowControl_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Power_State + * @{ + */ + +#define SDIO_PowerState_OFF ((uint32_t)0x00000000) +#define SDIO_PowerState_ON ((uint32_t)0x00000003) +#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) +/** + * @} + */ + + +/** @defgroup SDIO_Interrupt_sources + * @{ + */ + +#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_IT_RXOVERR ((uint32_t)0x00000020) +#define SDIO_IT_CMDREND ((uint32_t)0x00000040) +#define SDIO_IT_CMDSENT ((uint32_t)0x00000080) +#define SDIO_IT_DATAEND ((uint32_t)0x00000100) +#define SDIO_IT_STBITERR ((uint32_t)0x00000200) +#define SDIO_IT_DBCKEND ((uint32_t)0x00000400) +#define SDIO_IT_CMDACT ((uint32_t)0x00000800) +#define SDIO_IT_TXACT ((uint32_t)0x00001000) +#define SDIO_IT_RXACT ((uint32_t)0x00002000) +#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_IT_TXDAVL ((uint32_t)0x00100000) +#define SDIO_IT_RXDAVL ((uint32_t)0x00200000) +#define SDIO_IT_SDIOIT ((uint32_t)0x00400000) +#define SDIO_IT_CEATAEND ((uint32_t)0x00800000) +#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00)) +/** + * @} + */ + +/** @defgroup SDIO_Command_Index + * @{ + */ + +#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) +/** + * @} + */ + +/** @defgroup SDIO_Response_Type + * @{ + */ + +#define SDIO_Response_No ((uint32_t)0x00000000) +#define SDIO_Response_Short ((uint32_t)0x00000040) +#define SDIO_Response_Long ((uint32_t)0x000000C0) +#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \ + ((RESPONSE) == SDIO_Response_Short) || \ + ((RESPONSE) == SDIO_Response_Long)) +/** + * @} + */ + +/** @defgroup SDIO_Wait_Interrupt_State + * @{ + */ + +#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */ +#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */ +#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */ +#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \ + ((WAIT) == SDIO_Wait_Pend)) +/** + * @} + */ + +/** @defgroup SDIO_CPSM_State + * @{ + */ + +#define SDIO_CPSM_Disable ((uint32_t)0x00000000) +#define SDIO_CPSM_Enable ((uint32_t)0x00000400) +#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) +/** + * @} + */ + +/** @defgroup SDIO_Response_Registers + * @{ + */ + +#define SDIO_RESP1 ((uint32_t)0x00000000) +#define SDIO_RESP2 ((uint32_t)0x00000004) +#define SDIO_RESP3 ((uint32_t)0x00000008) +#define SDIO_RESP4 ((uint32_t)0x0000000C) +#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \ + ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4)) +/** + * @} + */ + +/** @defgroup SDIO_Data_Length + * @{ + */ + +#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) +/** + * @} + */ + +/** @defgroup SDIO_Data_Block_Size + * @{ + */ + +#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000) +#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010) +#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020) +#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030) +#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040) +#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050) +#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060) +#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070) +#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080) +#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090) +#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0) +#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0) +#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0) +#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0) +#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0) +#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \ + ((SIZE) == SDIO_DataBlockSize_2b) || \ + ((SIZE) == SDIO_DataBlockSize_4b) || \ + ((SIZE) == SDIO_DataBlockSize_8b) || \ + ((SIZE) == SDIO_DataBlockSize_16b) || \ + ((SIZE) == SDIO_DataBlockSize_32b) || \ + ((SIZE) == SDIO_DataBlockSize_64b) || \ + ((SIZE) == SDIO_DataBlockSize_128b) || \ + ((SIZE) == SDIO_DataBlockSize_256b) || \ + ((SIZE) == SDIO_DataBlockSize_512b) || \ + ((SIZE) == SDIO_DataBlockSize_1024b) || \ + ((SIZE) == SDIO_DataBlockSize_2048b) || \ + ((SIZE) == SDIO_DataBlockSize_4096b) || \ + ((SIZE) == SDIO_DataBlockSize_8192b) || \ + ((SIZE) == SDIO_DataBlockSize_16384b)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Direction + * @{ + */ + +#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000) +#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002) +#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \ + ((DIR) == SDIO_TransferDir_ToSDIO)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Type + * @{ + */ + +#define SDIO_TransferMode_Block ((uint32_t)0x00000000) +#define SDIO_TransferMode_Stream ((uint32_t)0x00000004) +#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \ + ((MODE) == SDIO_TransferMode_Block)) +/** + * @} + */ + +/** @defgroup SDIO_DPSM_State + * @{ + */ + +#define SDIO_DPSM_Disable ((uint32_t)0x00000000) +#define SDIO_DPSM_Enable ((uint32_t)0x00000001) +#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) +/** + * @} + */ + +/** @defgroup SDIO_Flags + * @{ + */ + +#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020) +#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040) +#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080) +#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100) +#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200) +#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400) +#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800) +#define SDIO_FLAG_TXACT ((uint32_t)0x00001000) +#define SDIO_FLAG_RXACT ((uint32_t)0x00002000) +#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000) +#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000) +#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000) +#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000) +#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_DCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_CTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_DTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_TXUNDERR) || \ + ((FLAG) == SDIO_FLAG_RXOVERR) || \ + ((FLAG) == SDIO_FLAG_CMDREND) || \ + ((FLAG) == SDIO_FLAG_CMDSENT) || \ + ((FLAG) == SDIO_FLAG_DATAEND) || \ + ((FLAG) == SDIO_FLAG_STBITERR) || \ + ((FLAG) == SDIO_FLAG_DBCKEND) || \ + ((FLAG) == SDIO_FLAG_CMDACT) || \ + ((FLAG) == SDIO_FLAG_TXACT) || \ + ((FLAG) == SDIO_FLAG_RXACT) || \ + ((FLAG) == SDIO_FLAG_TXFIFOHE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOHF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOF) || \ + ((FLAG) == SDIO_FLAG_RXFIFOF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOE) || \ + ((FLAG) == SDIO_FLAG_TXDAVL) || \ + ((FLAG) == SDIO_FLAG_RXDAVL) || \ + ((FLAG) == SDIO_FLAG_SDIOIT) || \ + ((FLAG) == SDIO_FLAG_CEATAEND)) + +#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00)) + +#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ + ((IT) == SDIO_IT_DCRCFAIL) || \ + ((IT) == SDIO_IT_CTIMEOUT) || \ + ((IT) == SDIO_IT_DTIMEOUT) || \ + ((IT) == SDIO_IT_TXUNDERR) || \ + ((IT) == SDIO_IT_RXOVERR) || \ + ((IT) == SDIO_IT_CMDREND) || \ + ((IT) == SDIO_IT_CMDSENT) || \ + ((IT) == SDIO_IT_DATAEND) || \ + ((IT) == SDIO_IT_STBITERR) || \ + ((IT) == SDIO_IT_DBCKEND) || \ + ((IT) == SDIO_IT_CMDACT) || \ + ((IT) == SDIO_IT_TXACT) || \ + ((IT) == SDIO_IT_RXACT) || \ + ((IT) == SDIO_IT_TXFIFOHE) || \ + ((IT) == SDIO_IT_RXFIFOHF) || \ + ((IT) == SDIO_IT_TXFIFOF) || \ + ((IT) == SDIO_IT_RXFIFOF) || \ + ((IT) == SDIO_IT_TXFIFOE) || \ + ((IT) == SDIO_IT_RXFIFOE) || \ + ((IT) == SDIO_IT_TXDAVL) || \ + ((IT) == SDIO_IT_RXDAVL) || \ + ((IT) == SDIO_IT_SDIOIT) || \ + ((IT) == SDIO_IT_CEATAEND)) + +#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00)) + +/** + * @} + */ + +/** @defgroup SDIO_Read_Wait_Mode + * @{ + */ + +#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001) +#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000) +#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \ + ((MODE) == SDIO_ReadWaitMode_DATA2)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SDIO_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Exported_Functions + * @{ + */ + +void SDIO_DeInit(void); +void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct); +void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct); +void SDIO_ClockCmd(FunctionalState NewState); +void SDIO_SetPowerState(uint32_t SDIO_PowerState); +uint32_t SDIO_GetPowerState(void); +void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState); +void SDIO_DMACmd(FunctionalState NewState); +void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); +void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct); +uint8_t SDIO_GetCommandResponse(void); +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); +void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct); +void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct); +uint32_t SDIO_GetDataCounter(void); +uint32_t SDIO_ReadData(void); +void SDIO_WriteData(uint32_t Data); +uint32_t SDIO_GetFIFOCount(void); +void SDIO_StartSDIOReadWait(FunctionalState NewState); +void SDIO_StopSDIOReadWait(FunctionalState NewState); +void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); +void SDIO_SetSDIOOperation(FunctionalState NewState); +void SDIO_SendSDIOSuspendCmd(FunctionalState NewState); +void SDIO_CommandCompletionCmd(FunctionalState NewState); +void SDIO_CEATAITCmd(FunctionalState NewState); +void SDIO_SendCEATACmd(FunctionalState NewState); +FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG); +void SDIO_ClearFlag(uint32_t SDIO_FLAG); +ITStatus SDIO_GetITStatus(uint32_t SDIO_IT); +void SDIO_ClearITPendingBit(uint32_t SDIO_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_SDIO_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_spi.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_spi.h new file mode 100644 index 0000000..23cc26d --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_spi.h @@ -0,0 +1,487 @@ +/** + ****************************************************************************** + * @file stm32f10x_spi.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the SPI firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_SPI_H +#define __STM32F10x_SPI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/** @defgroup SPI_Exported_Types + * @{ + */ + +/** + * @brief SPI Init structure definition + */ + +typedef struct +{ + uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_data_direction */ + + uint16_t SPI_Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_mode */ + + uint16_t SPI_DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_data_size */ + + uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler. + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */ +}SPI_InitTypeDef; + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + + uint16_t I2S_Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ +}I2S_InitTypeDef; + +/** + * @} + */ + +/** @defgroup SPI_Exported_Constants + * @{ + */ + +#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \ + ((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3)) + +#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3)) + +/** @defgroup SPI_data_direction + * @{ + */ + +#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) +#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) +#define SPI_Direction_1Line_Rx ((uint16_t)0x8000) +#define SPI_Direction_1Line_Tx ((uint16_t)0xC000) +#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ + ((MODE) == SPI_Direction_2Lines_RxOnly) || \ + ((MODE) == SPI_Direction_1Line_Rx) || \ + ((MODE) == SPI_Direction_1Line_Tx)) +/** + * @} + */ + +/** @defgroup SPI_mode + * @{ + */ + +#define SPI_Mode_Master ((uint16_t)0x0104) +#define SPI_Mode_Slave ((uint16_t)0x0000) +#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ + ((MODE) == SPI_Mode_Slave)) +/** + * @} + */ + +/** @defgroup SPI_data_size + * @{ + */ + +#define SPI_DataSize_16b ((uint16_t)0x0800) +#define SPI_DataSize_8b ((uint16_t)0x0000) +#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ + ((DATASIZE) == SPI_DataSize_8b)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity + * @{ + */ + +#define SPI_CPOL_Low ((uint16_t)0x0000) +#define SPI_CPOL_High ((uint16_t)0x0002) +#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ + ((CPOL) == SPI_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase + * @{ + */ + +#define SPI_CPHA_1Edge ((uint16_t)0x0000) +#define SPI_CPHA_2Edge ((uint16_t)0x0001) +#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ + ((CPHA) == SPI_CPHA_2Edge)) +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management + * @{ + */ + +#define SPI_NSS_Soft ((uint16_t)0x0200) +#define SPI_NSS_Hard ((uint16_t)0x0000) +#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ + ((NSS) == SPI_NSS_Hard)) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler + * @{ + */ + +#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) +#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) +#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) +#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) +#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) +#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) +#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) +#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) +#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_256)) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission + * @{ + */ + +#define SPI_FirstBit_MSB ((uint16_t)0x0000) +#define SPI_FirstBit_LSB ((uint16_t)0x0080) +#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ + ((BIT) == SPI_FirstBit_LSB)) +/** + * @} + */ + +/** @defgroup I2S_Mode + * @{ + */ + +#define I2S_Mode_SlaveTx ((uint16_t)0x0000) +#define I2S_Mode_SlaveRx ((uint16_t)0x0100) +#define I2S_Mode_MasterTx ((uint16_t)0x0200) +#define I2S_Mode_MasterRx ((uint16_t)0x0300) +#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ + ((MODE) == I2S_Mode_SlaveRx) || \ + ((MODE) == I2S_Mode_MasterTx) || \ + ((MODE) == I2S_Mode_MasterRx) ) +/** + * @} + */ + +/** @defgroup I2S_Standard + * @{ + */ + +#define I2S_Standard_Phillips ((uint16_t)0x0000) +#define I2S_Standard_MSB ((uint16_t)0x0010) +#define I2S_Standard_LSB ((uint16_t)0x0020) +#define I2S_Standard_PCMShort ((uint16_t)0x0030) +#define I2S_Standard_PCMLong ((uint16_t)0x00B0) +#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ + ((STANDARD) == I2S_Standard_MSB) || \ + ((STANDARD) == I2S_Standard_LSB) || \ + ((STANDARD) == I2S_Standard_PCMShort) || \ + ((STANDARD) == I2S_Standard_PCMLong)) +/** + * @} + */ + +/** @defgroup I2S_Data_Format + * @{ + */ + +#define I2S_DataFormat_16b ((uint16_t)0x0000) +#define I2S_DataFormat_16bextended ((uint16_t)0x0001) +#define I2S_DataFormat_24b ((uint16_t)0x0003) +#define I2S_DataFormat_32b ((uint16_t)0x0005) +#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ + ((FORMAT) == I2S_DataFormat_16bextended) || \ + ((FORMAT) == I2S_DataFormat_24b) || \ + ((FORMAT) == I2S_DataFormat_32b)) +/** + * @} + */ + +/** @defgroup I2S_MCLK_Output + * @{ + */ + +#define I2S_MCLKOutput_Enable ((uint16_t)0x0200) +#define I2S_MCLKOutput_Disable ((uint16_t)0x0000) +#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ + ((OUTPUT) == I2S_MCLKOutput_Disable)) +/** + * @} + */ + +/** @defgroup I2S_Audio_Frequency + * @{ + */ + +#define I2S_AudioFreq_192k ((uint32_t)192000) +#define I2S_AudioFreq_96k ((uint32_t)96000) +#define I2S_AudioFreq_48k ((uint32_t)48000) +#define I2S_AudioFreq_44k ((uint32_t)44100) +#define I2S_AudioFreq_32k ((uint32_t)32000) +#define I2S_AudioFreq_22k ((uint32_t)22050) +#define I2S_AudioFreq_16k ((uint32_t)16000) +#define I2S_AudioFreq_11k ((uint32_t)11025) +#define I2S_AudioFreq_8k ((uint32_t)8000) +#define I2S_AudioFreq_Default ((uint32_t)2) + +#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \ + ((FREQ) <= I2S_AudioFreq_192k)) || \ + ((FREQ) == I2S_AudioFreq_Default)) +/** + * @} + */ + +/** @defgroup I2S_Clock_Polarity + * @{ + */ + +#define I2S_CPOL_Low ((uint16_t)0x0000) +#define I2S_CPOL_High ((uint16_t)0x0008) +#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ + ((CPOL) == I2S_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_I2S_DMA_transfer_requests + * @{ + */ + +#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002) +#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001) +#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) +/** + * @} + */ + +/** @defgroup SPI_NSS_internal_software_management + * @{ + */ + +#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100) +#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) +#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ + ((INTERNAL) == SPI_NSSInternalSoft_Reset)) +/** + * @} + */ + +/** @defgroup SPI_CRC_Transmit_Receive + * @{ + */ + +#define SPI_CRC_Tx ((uint8_t)0x00) +#define SPI_CRC_Rx ((uint8_t)0x01) +#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) +/** + * @} + */ + +/** @defgroup SPI_direction_transmit_receive + * @{ + */ + +#define SPI_Direction_Rx ((uint16_t)0xBFFF) +#define SPI_Direction_Tx ((uint16_t)0x4000) +#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ + ((DIRECTION) == SPI_Direction_Tx)) +/** + * @} + */ + +/** @defgroup SPI_I2S_interrupts_definition + * @{ + */ + +#define SPI_I2S_IT_TXE ((uint8_t)0x71) +#define SPI_I2S_IT_RXNE ((uint8_t)0x60) +#define SPI_I2S_IT_ERR ((uint8_t)0x50) +#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == SPI_I2S_IT_RXNE) || \ + ((IT) == SPI_I2S_IT_ERR)) +#define SPI_I2S_IT_OVR ((uint8_t)0x56) +#define SPI_IT_MODF ((uint8_t)0x55) +#define SPI_IT_CRCERR ((uint8_t)0x54) +#define I2S_IT_UDR ((uint8_t)0x53) +#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR)) +#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == I2S_IT_UDR) || ((IT) == SPI_IT_CRCERR) || \ + ((IT) == SPI_IT_MODF) || ((IT) == SPI_I2S_IT_OVR)) +/** + * @} + */ + +/** @defgroup SPI_I2S_flags_definition + * @{ + */ + +#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001) +#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002) +#define I2S_FLAG_CHSIDE ((uint16_t)0x0004) +#define I2S_FLAG_UDR ((uint16_t)0x0008) +#define SPI_FLAG_CRCERR ((uint16_t)0x0010) +#define SPI_FLAG_MODF ((uint16_t)0x0020) +#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040) +#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080) +#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) +#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ + ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ + ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \ + ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)) +/** + * @} + */ + +/** @defgroup SPI_CRC_polynomial + * @{ + */ + +#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SPI_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions + * @{ + */ + +void SPI_I2S_DeInit(SPI_TypeDef* SPIx); +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); +void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data); +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx); +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize); +void SPI_TransmitCRC(SPI_TypeDef* SPIx); +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC); +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction); +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); +void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_SPI_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_tim.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_tim.h new file mode 100644 index 0000000..65bf76a --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_tim.h @@ -0,0 +1,1164 @@ +/** + ****************************************************************************** + * @file stm32f10x_tim.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the TIM firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_TIM_H +#define __STM32F10x_TIM_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/** @defgroup TIM_Exported_Types + * @{ + */ + +/** + * @brief TIM Time Base Init structure definition + * @note This structure is used with all TIMx except for TIM6 and TIM7. + */ + +typedef struct +{ + uint16_t TIM_Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between 0x0000 and 0xFFFF */ + + uint16_t TIM_CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint16_t TIM_Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between 0x0000 and 0xFFFF. */ + + uint16_t TIM_ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_Clock_Division_CKD */ + + uint8_t TIM_RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + This parameter must be a number between 0x00 and 0xFF. + @note This parameter is valid only for TIM1 and TIM8. */ +} TIM_TimeBaseInitTypeDef; + +/** + * @brief TIM Output Compare Init structure definition + */ + +typedef struct +{ + uint16_t TIM_OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint16_t TIM_OutputState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_Output_Compare_state */ + + uint16_t TIM_OutputNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_Output_Compare_N_state + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between 0x0000 and 0xFFFF */ + + uint16_t TIM_OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint16_t TIM_OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ + + uint16_t TIM_OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for TIM1 and TIM8. */ +} TIM_OCInitTypeDef; + +/** + * @brief TIM Input Capture Init structure definition + */ + +typedef struct +{ + + uint16_t TIM_Channel; /*!< Specifies the TIM channel. + This parameter can be a value of @ref TIM_Channel */ + + uint16_t TIM_ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint16_t TIM_ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint16_t TIM_ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint16_t TIM_ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between 0x0 and 0xF */ +} TIM_ICInitTypeDef; + +/** + * @brief BDTR structure definition + * @note This structure is used only with TIM1 and TIM8. + */ + +typedef struct +{ + + uint16_t TIM_OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref OSSR_Off_State_Selection_for_Run_mode_state */ + + uint16_t TIM_OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint16_t TIM_LOCKLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref Lock_level */ + + uint16_t TIM_DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between 0x00 and 0xFF */ + + uint16_t TIM_Break; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref Break_Input_enable_disable */ + + uint16_t TIM_BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref Break_Polarity */ + + uint16_t TIM_AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ +} TIM_BDTRInitTypeDef; + +/** @defgroup TIM_Exported_constants + * @{ + */ + +#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM10)|| \ + ((PERIPH) == TIM11)|| \ + ((PERIPH) == TIM12)|| \ + ((PERIPH) == TIM13)|| \ + ((PERIPH) == TIM14)|| \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST1: TIM 1 and 8 */ +#define IS_TIM_LIST1_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM8)) + +/* LIST2: TIM 1, 8, 15 16 and 17 */ +#define IS_TIM_LIST2_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST3: TIM 1, 2, 3, 4, 5 and 8 */ +#define IS_TIM_LIST3_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8)) + +/* LIST4: TIM 1, 2, 3, 4, 5, 8, 15, 16 and 17 */ +#define IS_TIM_LIST4_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST5: TIM 1, 2, 3, 4, 5, 8 and 15 */ +#define IS_TIM_LIST5_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM15)) + +/* LIST6: TIM 1, 2, 3, 4, 5, 8, 9, 12 and 15 */ +#define IS_TIM_LIST6_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM12)|| \ + ((PERIPH) == TIM15)) + +/* LIST7: TIM 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 and 15 */ +#define IS_TIM_LIST7_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM12)|| \ + ((PERIPH) == TIM15)) + +/* LIST8: TIM 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13, 14, 15, 16 and 17 */ +#define IS_TIM_LIST8_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM9) || \ + ((PERIPH) == TIM10)|| \ + ((PERIPH) == TIM11)|| \ + ((PERIPH) == TIM12)|| \ + ((PERIPH) == TIM13)|| \ + ((PERIPH) == TIM14)|| \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/* LIST9: TIM 1, 2, 3, 4, 5, 6, 7, 8, 15, 16, and 17 */ +#define IS_TIM_LIST9_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ + ((PERIPH) == TIM2) || \ + ((PERIPH) == TIM3) || \ + ((PERIPH) == TIM4) || \ + ((PERIPH) == TIM5) || \ + ((PERIPH) == TIM6) || \ + ((PERIPH) == TIM7) || \ + ((PERIPH) == TIM8) || \ + ((PERIPH) == TIM15)|| \ + ((PERIPH) == TIM16)|| \ + ((PERIPH) == TIM17)) + +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes + * @{ + */ + +#define TIM_OCMode_Timing ((uint16_t)0x0000) +#define TIM_OCMode_Active ((uint16_t)0x0010) +#define TIM_OCMode_Inactive ((uint16_t)0x0020) +#define TIM_OCMode_Toggle ((uint16_t)0x0030) +#define TIM_OCMode_PWM1 ((uint16_t)0x0060) +#define TIM_OCMode_PWM2 ((uint16_t)0x0070) +#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \ + ((MODE) == TIM_OCMode_Active) || \ + ((MODE) == TIM_OCMode_Inactive) || \ + ((MODE) == TIM_OCMode_Toggle)|| \ + ((MODE) == TIM_OCMode_PWM1) || \ + ((MODE) == TIM_OCMode_PWM2)) +#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \ + ((MODE) == TIM_OCMode_Active) || \ + ((MODE) == TIM_OCMode_Inactive) || \ + ((MODE) == TIM_OCMode_Toggle)|| \ + ((MODE) == TIM_OCMode_PWM1) || \ + ((MODE) == TIM_OCMode_PWM2) || \ + ((MODE) == TIM_ForcedAction_Active) || \ + ((MODE) == TIM_ForcedAction_InActive)) +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode + * @{ + */ + +#define TIM_OPMode_Single ((uint16_t)0x0008) +#define TIM_OPMode_Repetitive ((uint16_t)0x0000) +#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \ + ((MODE) == TIM_OPMode_Repetitive)) +/** + * @} + */ + +/** @defgroup TIM_Channel + * @{ + */ + +#define TIM_Channel_1 ((uint16_t)0x0000) +#define TIM_Channel_2 ((uint16_t)0x0004) +#define TIM_Channel_3 ((uint16_t)0x0008) +#define TIM_Channel_4 ((uint16_t)0x000C) +#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2) || \ + ((CHANNEL) == TIM_Channel_3) || \ + ((CHANNEL) == TIM_Channel_4)) +#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2)) +#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ + ((CHANNEL) == TIM_Channel_2) || \ + ((CHANNEL) == TIM_Channel_3)) +/** + * @} + */ + +/** @defgroup TIM_Clock_Division_CKD + * @{ + */ + +#define TIM_CKD_DIV1 ((uint16_t)0x0000) +#define TIM_CKD_DIV2 ((uint16_t)0x0100) +#define TIM_CKD_DIV4 ((uint16_t)0x0200) +#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \ + ((DIV) == TIM_CKD_DIV2) || \ + ((DIV) == TIM_CKD_DIV4)) +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode + * @{ + */ + +#define TIM_CounterMode_Up ((uint16_t)0x0000) +#define TIM_CounterMode_Down ((uint16_t)0x0010) +#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020) +#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040) +#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060) +#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \ + ((MODE) == TIM_CounterMode_Down) || \ + ((MODE) == TIM_CounterMode_CenterAligned1) || \ + ((MODE) == TIM_CounterMode_CenterAligned2) || \ + ((MODE) == TIM_CounterMode_CenterAligned3)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity + * @{ + */ + +#define TIM_OCPolarity_High ((uint16_t)0x0000) +#define TIM_OCPolarity_Low ((uint16_t)0x0002) +#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \ + ((POLARITY) == TIM_OCPolarity_Low)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity + * @{ + */ + +#define TIM_OCNPolarity_High ((uint16_t)0x0000) +#define TIM_OCNPolarity_Low ((uint16_t)0x0008) +#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \ + ((POLARITY) == TIM_OCNPolarity_Low)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_state + * @{ + */ + +#define TIM_OutputState_Disable ((uint16_t)0x0000) +#define TIM_OutputState_Enable ((uint16_t)0x0001) +#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \ + ((STATE) == TIM_OutputState_Enable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_state + * @{ + */ + +#define TIM_OutputNState_Disable ((uint16_t)0x0000) +#define TIM_OutputNState_Enable ((uint16_t)0x0004) +#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \ + ((STATE) == TIM_OutputNState_Enable)) +/** + * @} + */ + +/** @defgroup TIM_Capture_Compare_state + * @{ + */ + +#define TIM_CCx_Enable ((uint16_t)0x0001) +#define TIM_CCx_Disable ((uint16_t)0x0000) +#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \ + ((CCX) == TIM_CCx_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Capture_Compare_N_state + * @{ + */ + +#define TIM_CCxN_Enable ((uint16_t)0x0004) +#define TIM_CCxN_Disable ((uint16_t)0x0000) +#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \ + ((CCXN) == TIM_CCxN_Disable)) +/** + * @} + */ + +/** @defgroup Break_Input_enable_disable + * @{ + */ + +#define TIM_Break_Enable ((uint16_t)0x1000) +#define TIM_Break_Disable ((uint16_t)0x0000) +#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \ + ((STATE) == TIM_Break_Disable)) +/** + * @} + */ + +/** @defgroup Break_Polarity + * @{ + */ + +#define TIM_BreakPolarity_Low ((uint16_t)0x0000) +#define TIM_BreakPolarity_High ((uint16_t)0x2000) +#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \ + ((POLARITY) == TIM_BreakPolarity_High)) +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset + * @{ + */ + +#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000) +#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000) +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \ + ((STATE) == TIM_AutomaticOutput_Disable)) +/** + * @} + */ + +/** @defgroup Lock_level + * @{ + */ + +#define TIM_LOCKLevel_OFF ((uint16_t)0x0000) +#define TIM_LOCKLevel_1 ((uint16_t)0x0100) +#define TIM_LOCKLevel_2 ((uint16_t)0x0200) +#define TIM_LOCKLevel_3 ((uint16_t)0x0300) +#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \ + ((LEVEL) == TIM_LOCKLevel_1) || \ + ((LEVEL) == TIM_LOCKLevel_2) || \ + ((LEVEL) == TIM_LOCKLevel_3)) +/** + * @} + */ + +/** @defgroup OSSI_Off_State_Selection_for_Idle_mode_state + * @{ + */ + +#define TIM_OSSIState_Enable ((uint16_t)0x0400) +#define TIM_OSSIState_Disable ((uint16_t)0x0000) +#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \ + ((STATE) == TIM_OSSIState_Disable)) +/** + * @} + */ + +/** @defgroup OSSR_Off_State_Selection_for_Run_mode_state + * @{ + */ + +#define TIM_OSSRState_Enable ((uint16_t)0x0800) +#define TIM_OSSRState_Disable ((uint16_t)0x0000) +#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \ + ((STATE) == TIM_OSSRState_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State + * @{ + */ + +#define TIM_OCIdleState_Set ((uint16_t)0x0100) +#define TIM_OCIdleState_Reset ((uint16_t)0x0000) +#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \ + ((STATE) == TIM_OCIdleState_Reset)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State + * @{ + */ + +#define TIM_OCNIdleState_Set ((uint16_t)0x0200) +#define TIM_OCNIdleState_Reset ((uint16_t)0x0000) +#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \ + ((STATE) == TIM_OCNIdleState_Reset)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity + * @{ + */ + +#define TIM_ICPolarity_Rising ((uint16_t)0x0000) +#define TIM_ICPolarity_Falling ((uint16_t)0x0002) +#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A) +#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ + ((POLARITY) == TIM_ICPolarity_Falling)) +#define IS_TIM_IC_POLARITY_LITE(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ + ((POLARITY) == TIM_ICPolarity_Falling)|| \ + ((POLARITY) == TIM_ICPolarity_BothEdge)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection + * @{ + */ + +#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be + connected to IC2, IC1, IC4 or IC3, respectively. */ +#define TIM_ICSelection_TRC ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */ +#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \ + ((SELECTION) == TIM_ICSelection_IndirectTI) || \ + ((SELECTION) == TIM_ICSelection_TRC)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler + * @{ + */ + +#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */ +#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */ +#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */ +#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */ +#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ + ((PRESCALER) == TIM_ICPSC_DIV2) || \ + ((PRESCALER) == TIM_ICPSC_DIV4) || \ + ((PRESCALER) == TIM_ICPSC_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_interrupt_sources + * @{ + */ + +#define TIM_IT_Update ((uint16_t)0x0001) +#define TIM_IT_CC1 ((uint16_t)0x0002) +#define TIM_IT_CC2 ((uint16_t)0x0004) +#define TIM_IT_CC3 ((uint16_t)0x0008) +#define TIM_IT_CC4 ((uint16_t)0x0010) +#define TIM_IT_COM ((uint16_t)0x0020) +#define TIM_IT_Trigger ((uint16_t)0x0040) +#define TIM_IT_Break ((uint16_t)0x0080) +#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000)) + +#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \ + ((IT) == TIM_IT_CC1) || \ + ((IT) == TIM_IT_CC2) || \ + ((IT) == TIM_IT_CC3) || \ + ((IT) == TIM_IT_CC4) || \ + ((IT) == TIM_IT_COM) || \ + ((IT) == TIM_IT_Trigger) || \ + ((IT) == TIM_IT_Break)) +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address + * @{ + */ + +#define TIM_DMABase_CR1 ((uint16_t)0x0000) +#define TIM_DMABase_CR2 ((uint16_t)0x0001) +#define TIM_DMABase_SMCR ((uint16_t)0x0002) +#define TIM_DMABase_DIER ((uint16_t)0x0003) +#define TIM_DMABase_SR ((uint16_t)0x0004) +#define TIM_DMABase_EGR ((uint16_t)0x0005) +#define TIM_DMABase_CCMR1 ((uint16_t)0x0006) +#define TIM_DMABase_CCMR2 ((uint16_t)0x0007) +#define TIM_DMABase_CCER ((uint16_t)0x0008) +#define TIM_DMABase_CNT ((uint16_t)0x0009) +#define TIM_DMABase_PSC ((uint16_t)0x000A) +#define TIM_DMABase_ARR ((uint16_t)0x000B) +#define TIM_DMABase_RCR ((uint16_t)0x000C) +#define TIM_DMABase_CCR1 ((uint16_t)0x000D) +#define TIM_DMABase_CCR2 ((uint16_t)0x000E) +#define TIM_DMABase_CCR3 ((uint16_t)0x000F) +#define TIM_DMABase_CCR4 ((uint16_t)0x0010) +#define TIM_DMABase_BDTR ((uint16_t)0x0011) +#define TIM_DMABase_DCR ((uint16_t)0x0012) +#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \ + ((BASE) == TIM_DMABase_CR2) || \ + ((BASE) == TIM_DMABase_SMCR) || \ + ((BASE) == TIM_DMABase_DIER) || \ + ((BASE) == TIM_DMABase_SR) || \ + ((BASE) == TIM_DMABase_EGR) || \ + ((BASE) == TIM_DMABase_CCMR1) || \ + ((BASE) == TIM_DMABase_CCMR2) || \ + ((BASE) == TIM_DMABase_CCER) || \ + ((BASE) == TIM_DMABase_CNT) || \ + ((BASE) == TIM_DMABase_PSC) || \ + ((BASE) == TIM_DMABase_ARR) || \ + ((BASE) == TIM_DMABase_RCR) || \ + ((BASE) == TIM_DMABase_CCR1) || \ + ((BASE) == TIM_DMABase_CCR2) || \ + ((BASE) == TIM_DMABase_CCR3) || \ + ((BASE) == TIM_DMABase_CCR4) || \ + ((BASE) == TIM_DMABase_BDTR) || \ + ((BASE) == TIM_DMABase_DCR)) +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length + * @{ + */ + +#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000) +#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100) +#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200) +#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300) +#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400) +#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500) +#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600) +#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700) +#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800) +#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900) +#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00) +#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00) +#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00) +#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00) +#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00) +#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00) +#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000) +#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100) +#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \ + ((LENGTH) == TIM_DMABurstLength_2Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_3Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_4Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_5Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_6Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_7Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_8Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_9Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_10Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_11Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_12Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_13Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_14Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_15Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_16Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_17Transfers) || \ + ((LENGTH) == TIM_DMABurstLength_18Transfers)) +/** + * @} + */ + +/** @defgroup TIM_DMA_sources + * @{ + */ + +#define TIM_DMA_Update ((uint16_t)0x0100) +#define TIM_DMA_CC1 ((uint16_t)0x0200) +#define TIM_DMA_CC2 ((uint16_t)0x0400) +#define TIM_DMA_CC3 ((uint16_t)0x0800) +#define TIM_DMA_CC4 ((uint16_t)0x1000) +#define TIM_DMA_COM ((uint16_t)0x2000) +#define TIM_DMA_Trigger ((uint16_t)0x4000) +#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000)) + +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Prescaler + * @{ + */ + +#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000) +#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000) +#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000) +#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000) +#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \ + ((PRESCALER) == TIM_ExtTRGPSC_DIV8)) +/** + * @} + */ + +/** @defgroup TIM_Internal_Trigger_Selection + * @{ + */ + +#define TIM_TS_ITR0 ((uint16_t)0x0000) +#define TIM_TS_ITR1 ((uint16_t)0x0010) +#define TIM_TS_ITR2 ((uint16_t)0x0020) +#define TIM_TS_ITR3 ((uint16_t)0x0030) +#define TIM_TS_TI1F_ED ((uint16_t)0x0040) +#define TIM_TS_TI1FP1 ((uint16_t)0x0050) +#define TIM_TS_TI2FP2 ((uint16_t)0x0060) +#define TIM_TS_ETRF ((uint16_t)0x0070) +#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3) || \ + ((SELECTION) == TIM_TS_TI1F_ED) || \ + ((SELECTION) == TIM_TS_TI1FP1) || \ + ((SELECTION) == TIM_TS_TI2FP2) || \ + ((SELECTION) == TIM_TS_ETRF)) +#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ + ((SELECTION) == TIM_TS_ITR1) || \ + ((SELECTION) == TIM_TS_ITR2) || \ + ((SELECTION) == TIM_TS_ITR3)) +/** + * @} + */ + +/** @defgroup TIM_TIx_External_Clock_Source + * @{ + */ + +#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050) +#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060) +#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040) +#define IS_TIM_TIXCLK_SOURCE(SOURCE) (((SOURCE) == TIM_TIxExternalCLK1Source_TI1) || \ + ((SOURCE) == TIM_TIxExternalCLK1Source_TI2) || \ + ((SOURCE) == TIM_TIxExternalCLK1Source_TI1ED)) +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Polarity + * @{ + */ +#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000) +#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000) +#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \ + ((POLARITY) == TIM_ExtTRGPolarity_NonInverted)) +/** + * @} + */ + +/** @defgroup TIM_Prescaler_Reload_Mode + * @{ + */ + +#define TIM_PSCReloadMode_Update ((uint16_t)0x0000) +#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001) +#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \ + ((RELOAD) == TIM_PSCReloadMode_Immediate)) +/** + * @} + */ + +/** @defgroup TIM_Forced_Action + * @{ + */ + +#define TIM_ForcedAction_Active ((uint16_t)0x0050) +#define TIM_ForcedAction_InActive ((uint16_t)0x0040) +#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \ + ((ACTION) == TIM_ForcedAction_InActive)) +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode + * @{ + */ + +#define TIM_EncoderMode_TI1 ((uint16_t)0x0001) +#define TIM_EncoderMode_TI2 ((uint16_t)0x0002) +#define TIM_EncoderMode_TI12 ((uint16_t)0x0003) +#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \ + ((MODE) == TIM_EncoderMode_TI2) || \ + ((MODE) == TIM_EncoderMode_TI12)) +/** + * @} + */ + + +/** @defgroup TIM_Event_Source + * @{ + */ + +#define TIM_EventSource_Update ((uint16_t)0x0001) +#define TIM_EventSource_CC1 ((uint16_t)0x0002) +#define TIM_EventSource_CC2 ((uint16_t)0x0004) +#define TIM_EventSource_CC3 ((uint16_t)0x0008) +#define TIM_EventSource_CC4 ((uint16_t)0x0010) +#define TIM_EventSource_COM ((uint16_t)0x0020) +#define TIM_EventSource_Trigger ((uint16_t)0x0040) +#define TIM_EventSource_Break ((uint16_t)0x0080) +#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000)) + +/** + * @} + */ + +/** @defgroup TIM_Update_Source + * @{ + */ + +#define TIM_UpdateSource_Global ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow + or the setting of UG bit, or an update generation + through the slave mode controller. */ +#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */ +#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \ + ((SOURCE) == TIM_UpdateSource_Regular)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Preload_State + * @{ + */ + +#define TIM_OCPreload_Enable ((uint16_t)0x0008) +#define TIM_OCPreload_Disable ((uint16_t)0x0000) +#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \ + ((STATE) == TIM_OCPreload_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Fast_State + * @{ + */ + +#define TIM_OCFast_Enable ((uint16_t)0x0004) +#define TIM_OCFast_Disable ((uint16_t)0x0000) +#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \ + ((STATE) == TIM_OCFast_Disable)) + +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Clear_State + * @{ + */ + +#define TIM_OCClear_Enable ((uint16_t)0x0080) +#define TIM_OCClear_Disable ((uint16_t)0x0000) +#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \ + ((STATE) == TIM_OCClear_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Trigger_Output_Source + * @{ + */ + +#define TIM_TRGOSource_Reset ((uint16_t)0x0000) +#define TIM_TRGOSource_Enable ((uint16_t)0x0010) +#define TIM_TRGOSource_Update ((uint16_t)0x0020) +#define TIM_TRGOSource_OC1 ((uint16_t)0x0030) +#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040) +#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050) +#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060) +#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070) +#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \ + ((SOURCE) == TIM_TRGOSource_Enable) || \ + ((SOURCE) == TIM_TRGOSource_Update) || \ + ((SOURCE) == TIM_TRGOSource_OC1) || \ + ((SOURCE) == TIM_TRGOSource_OC1Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC2Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC3Ref) || \ + ((SOURCE) == TIM_TRGOSource_OC4Ref)) +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode + * @{ + */ + +#define TIM_SlaveMode_Reset ((uint16_t)0x0004) +#define TIM_SlaveMode_Gated ((uint16_t)0x0005) +#define TIM_SlaveMode_Trigger ((uint16_t)0x0006) +#define TIM_SlaveMode_External1 ((uint16_t)0x0007) +#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \ + ((MODE) == TIM_SlaveMode_Gated) || \ + ((MODE) == TIM_SlaveMode_Trigger) || \ + ((MODE) == TIM_SlaveMode_External1)) +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode + * @{ + */ + +#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080) +#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000) +#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \ + ((STATE) == TIM_MasterSlaveMode_Disable)) +/** + * @} + */ + +/** @defgroup TIM_Flags + * @{ + */ + +#define TIM_FLAG_Update ((uint16_t)0x0001) +#define TIM_FLAG_CC1 ((uint16_t)0x0002) +#define TIM_FLAG_CC2 ((uint16_t)0x0004) +#define TIM_FLAG_CC3 ((uint16_t)0x0008) +#define TIM_FLAG_CC4 ((uint16_t)0x0010) +#define TIM_FLAG_COM ((uint16_t)0x0020) +#define TIM_FLAG_Trigger ((uint16_t)0x0040) +#define TIM_FLAG_Break ((uint16_t)0x0080) +#define TIM_FLAG_CC1OF ((uint16_t)0x0200) +#define TIM_FLAG_CC2OF ((uint16_t)0x0400) +#define TIM_FLAG_CC3OF ((uint16_t)0x0800) +#define TIM_FLAG_CC4OF ((uint16_t)0x1000) +#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \ + ((FLAG) == TIM_FLAG_CC1) || \ + ((FLAG) == TIM_FLAG_CC2) || \ + ((FLAG) == TIM_FLAG_CC3) || \ + ((FLAG) == TIM_FLAG_CC4) || \ + ((FLAG) == TIM_FLAG_COM) || \ + ((FLAG) == TIM_FLAG_Trigger) || \ + ((FLAG) == TIM_FLAG_Break) || \ + ((FLAG) == TIM_FLAG_CC1OF) || \ + ((FLAG) == TIM_FLAG_CC2OF) || \ + ((FLAG) == TIM_FLAG_CC3OF) || \ + ((FLAG) == TIM_FLAG_CC4OF)) + + +#define IS_TIM_CLEAR_FLAG(TIM_FLAG) ((((TIM_FLAG) & (uint16_t)0xE100) == 0x0000) && ((TIM_FLAG) != 0x0000)) +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Filer_Value + * @{ + */ + +#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup TIM_External_Trigger_Filter + * @{ + */ + +#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF) +/** + * @} + */ + +/** @defgroup TIM_Legacy + * @{ + */ + +#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer +#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers +#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers +#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers +#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers +#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers +#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers +#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers +#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers +#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers +#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers +#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers +#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers +#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers +#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers +#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers +#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers +#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions + * @{ + */ + +void TIM_DeInit(TIM_TypeDef* TIMx); +void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); +void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct); +void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); +void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct); +void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct); +void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct); +void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState); +void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource); +void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength); +void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState); +void TIM_InternalClockConfig(TIM_TypeDef* TIMx); +void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); +void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, + uint16_t TIM_ICPolarity, uint16_t ICFilter); +void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); +void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter); +void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter); +void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode); +void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode); +void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); +void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, + uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity); +void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); +void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); +void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); +void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); +void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); +void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); +void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx); +void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN); +void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode); +void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource); +void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState); +void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode); +void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource); +void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); +void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode); +void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter); +void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload); +void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1); +void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2); +void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3); +void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4); +void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); +void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD); +uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx); +uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx); +uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx); +uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx); +uint16_t TIM_GetCounter(TIM_TypeDef* TIMx); +uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx); +FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); +void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); +ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT); +void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32F10x_TIM_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_usart.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_usart.h new file mode 100644 index 0000000..162fa87 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_usart.h @@ -0,0 +1,412 @@ +/** + ****************************************************************************** + * @file stm32f10x_usart.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the USART + * firmware library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_USART_H +#define __STM32F10x_USART_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/** @defgroup USART_Exported_Types + * @{ + */ + +/** + * @brief USART Init Structure definition + */ + +typedef struct +{ + uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate))) + - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */ + + uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_Word_Length */ + + uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits */ + + uint16_t USART_Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode */ + + uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref USART_Hardware_Flow_Control */ +} USART_InitTypeDef; + +/** + * @brief USART Clock Init Structure definition + */ + +typedef struct +{ + + uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_Clock */ + + uint16_t USART_CPOL; /*!< Specifies the steady state value of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity */ + + uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase */ + + uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit */ +} USART_ClockInitTypeDef; + +/** + * @} + */ + +/** @defgroup USART_Exported_Constants + * @{ + */ + +#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == UART4) || \ + ((PERIPH) == UART5)) + +#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3)) + +#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == UART4)) +/** @defgroup USART_Word_Length + * @{ + */ + +#define USART_WordLength_8b ((uint16_t)0x0000) +#define USART_WordLength_9b ((uint16_t)0x1000) + +#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ + ((LENGTH) == USART_WordLength_9b)) +/** + * @} + */ + +/** @defgroup USART_Stop_Bits + * @{ + */ + +#define USART_StopBits_1 ((uint16_t)0x0000) +#define USART_StopBits_0_5 ((uint16_t)0x1000) +#define USART_StopBits_2 ((uint16_t)0x2000) +#define USART_StopBits_1_5 ((uint16_t)0x3000) +#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ + ((STOPBITS) == USART_StopBits_0_5) || \ + ((STOPBITS) == USART_StopBits_2) || \ + ((STOPBITS) == USART_StopBits_1_5)) +/** + * @} + */ + +/** @defgroup USART_Parity + * @{ + */ + +#define USART_Parity_No ((uint16_t)0x0000) +#define USART_Parity_Even ((uint16_t)0x0400) +#define USART_Parity_Odd ((uint16_t)0x0600) +#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ + ((PARITY) == USART_Parity_Even) || \ + ((PARITY) == USART_Parity_Odd)) +/** + * @} + */ + +/** @defgroup USART_Mode + * @{ + */ + +#define USART_Mode_Rx ((uint16_t)0x0004) +#define USART_Mode_Tx ((uint16_t)0x0008) +#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00)) +/** + * @} + */ + +/** @defgroup USART_Hardware_Flow_Control + * @{ + */ +#define USART_HardwareFlowControl_None ((uint16_t)0x0000) +#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100) +#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200) +#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300) +#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ + (((CONTROL) == USART_HardwareFlowControl_None) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS) || \ + ((CONTROL) == USART_HardwareFlowControl_CTS) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) +/** + * @} + */ + +/** @defgroup USART_Clock + * @{ + */ +#define USART_Clock_Disable ((uint16_t)0x0000) +#define USART_Clock_Enable ((uint16_t)0x0800) +#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ + ((CLOCK) == USART_Clock_Enable)) +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity + * @{ + */ + +#define USART_CPOL_Low ((uint16_t)0x0000) +#define USART_CPOL_High ((uint16_t)0x0400) +#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) + +/** + * @} + */ + +/** @defgroup USART_Clock_Phase + * @{ + */ + +#define USART_CPHA_1Edge ((uint16_t)0x0000) +#define USART_CPHA_2Edge ((uint16_t)0x0200) +#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) + +/** + * @} + */ + +/** @defgroup USART_Last_Bit + * @{ + */ + +#define USART_LastBit_Disable ((uint16_t)0x0000) +#define USART_LastBit_Enable ((uint16_t)0x0100) +#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ + ((LASTBIT) == USART_LastBit_Enable)) +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition + * @{ + */ + +#define USART_IT_PE ((uint16_t)0x0028) +#define USART_IT_TXE ((uint16_t)0x0727) +#define USART_IT_TC ((uint16_t)0x0626) +#define USART_IT_RXNE ((uint16_t)0x0525) +#define USART_IT_IDLE ((uint16_t)0x0424) +#define USART_IT_LBD ((uint16_t)0x0846) +#define USART_IT_CTS ((uint16_t)0x096A) +#define USART_IT_ERR ((uint16_t)0x0060) +#define USART_IT_ORE ((uint16_t)0x0360) +#define USART_IT_NE ((uint16_t)0x0260) +#define USART_IT_FE ((uint16_t)0x0160) +#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR)) +#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ + ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE)) +#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS)) +/** + * @} + */ + +/** @defgroup USART_DMA_Requests + * @{ + */ + +#define USART_DMAReq_Tx ((uint16_t)0x0080) +#define USART_DMAReq_Rx ((uint16_t)0x0040) +#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00)) + +/** + * @} + */ + +/** @defgroup USART_WakeUp_methods + * @{ + */ + +#define USART_WakeUp_IdleLine ((uint16_t)0x0000) +#define USART_WakeUp_AddressMark ((uint16_t)0x0800) +#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ + ((WAKEUP) == USART_WakeUp_AddressMark)) +/** + * @} + */ + +/** @defgroup USART_LIN_Break_Detection_Length + * @{ + */ + +#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000) +#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020) +#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ + (((LENGTH) == USART_LINBreakDetectLength_10b) || \ + ((LENGTH) == USART_LINBreakDetectLength_11b)) +/** + * @} + */ + +/** @defgroup USART_IrDA_Low_Power + * @{ + */ + +#define USART_IrDAMode_LowPower ((uint16_t)0x0004) +#define USART_IrDAMode_Normal ((uint16_t)0x0000) +#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ + ((MODE) == USART_IrDAMode_Normal)) +/** + * @} + */ + +/** @defgroup USART_Flags + * @{ + */ + +#define USART_FLAG_CTS ((uint16_t)0x0200) +#define USART_FLAG_LBD ((uint16_t)0x0100) +#define USART_FLAG_TXE ((uint16_t)0x0080) +#define USART_FLAG_TC ((uint16_t)0x0040) +#define USART_FLAG_RXNE ((uint16_t)0x0020) +#define USART_FLAG_IDLE ((uint16_t)0x0010) +#define USART_FLAG_ORE ((uint16_t)0x0008) +#define USART_FLAG_NE ((uint16_t)0x0004) +#define USART_FLAG_FE ((uint16_t)0x0002) +#define USART_FLAG_PE ((uint16_t)0x0001) +#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ + ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ + ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ + ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ + ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE)) + +#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00)) +#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(uint32_t*)&(PERIPH)) != UART4_BASE) &&\ + ((*(uint32_t*)&(PERIPH)) != UART5_BASE)) \ + || ((USART_FLAG) != USART_FLAG_CTS)) +#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21)) +#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) +#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup USART_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions + * @{ + */ + +void USART_DeInit(USART_TypeDef* USARTx); +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); +void USART_StructInit(USART_InitTypeDef* USART_InitStruct); +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState); +void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState); +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address); +void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp); +void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength); +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data); +uint16_t USART_ReceiveData(USART_TypeDef* USARTx); +void USART_SendBreak(USART_TypeDef* USARTx); +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode); +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG); +void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG); +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT); +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_USART_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_wwdg.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_wwdg.h new file mode 100644 index 0000000..bdfa177 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/inc/stm32f10x_wwdg.h @@ -0,0 +1,115 @@ +/** + ****************************************************************************** + * @file stm32f10x_wwdg.h + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file contains all the functions prototypes for the WWDG firmware + * library. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_WWDG_H +#define __STM32F10x_WWDG_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @addtogroup WWDG + * @{ + */ + +/** @defgroup WWDG_Exported_Types + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Exported_Constants + * @{ + */ + +/** @defgroup WWDG_Prescaler + * @{ + */ + +#define WWDG_Prescaler_1 ((uint32_t)0x00000000) +#define WWDG_Prescaler_2 ((uint32_t)0x00000080) +#define WWDG_Prescaler_4 ((uint32_t)0x00000100) +#define WWDG_Prescaler_8 ((uint32_t)0x00000180) +#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \ + ((PRESCALER) == WWDG_Prescaler_2) || \ + ((PRESCALER) == WWDG_Prescaler_4) || \ + ((PRESCALER) == WWDG_Prescaler_8)) +#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F) +#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F)) + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup WWDG_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup WWDG_Exported_Functions + * @{ + */ + +void WWDG_DeInit(void); +void WWDG_SetPrescaler(uint32_t WWDG_Prescaler); +void WWDG_SetWindowValue(uint8_t WindowValue); +void WWDG_EnableIT(void); +void WWDG_SetCounter(uint8_t Counter); +void WWDG_Enable(uint8_t Counter); +FlagStatus WWDG_GetFlagStatus(void); +void WWDG_ClearFlag(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F10x_WWDG_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/misc.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/misc.c new file mode 100644 index 0000000..c0a5e11 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/misc.c @@ -0,0 +1,225 @@ +/** + ****************************************************************************** + * @file misc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the miscellaneous firmware functions (add-on + * to CMSIS functions). + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "misc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup MISC + * @brief MISC driver modules + * @{ + */ + +/** @defgroup MISC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Defines + * @{ + */ + +#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000) +/** + * @} + */ + +/** @defgroup MISC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Functions + * @{ + */ + +/** + * @brief Configures the priority grouping: pre-emption priority and subpriority. + * @param NVIC_PriorityGroup: specifies the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority + * 4 bits for subpriority + * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority + * 3 bits for subpriority + * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority + * 2 bits for subpriority + * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority + * 1 bits for subpriority + * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority + * 0 bits for subpriority + * @retval None + */ +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */ + SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup; +} + +/** + * @brief Initializes the NVIC peripheral according to the specified + * parameters in the NVIC_InitStruct. + * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains + * the configuration information for the specified NVIC peripheral. + * @retval None + */ +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) +{ + uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F; + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); + assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority)); + + if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) + { + /* Compute the Corresponding IRQ Priority --------------------------------*/ + tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08; + tmppre = (0x4 - tmppriority); + tmpsub = tmpsub >> tmppriority; + + tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre; + tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub; + tmppriority = tmppriority << 0x04; + + NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority; + + /* Enable the Selected IRQ Channels --------------------------------------*/ + NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = + (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } + else + { + /* Disable the Selected IRQ Channels -------------------------------------*/ + NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = + (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } +} + +/** + * @brief Sets the vector table location and Offset. + * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory. + * This parameter can be one of the following values: + * @arg NVIC_VectTab_RAM + * @arg NVIC_VectTab_FLASH + * @param Offset: Vector Table base offset field. This value must be a multiple + * of 0x200. + * @retval None + */ +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset) +{ + /* Check the parameters */ + assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); + assert_param(IS_NVIC_OFFSET(Offset)); + + SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80); +} + +/** + * @brief Selects the condition for the system to enter low power mode. + * @param LowPowerMode: Specifies the new mode for the system to enter low power mode. + * This parameter can be one of the following values: + * @arg NVIC_LP_SEVONPEND + * @arg NVIC_LP_SLEEPDEEP + * @arg NVIC_LP_SLEEPONEXIT + * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_NVIC_LP(LowPowerMode)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + SCB->SCR |= LowPowerMode; + } + else + { + SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode); + } +} + +/** + * @brief Configures the SysTick clock source. + * @param SysTick_CLKSource: specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); + if (SysTick_CLKSource == SysTick_CLKSource_HCLK) + { + SysTick->CTRL |= SysTick_CLKSource_HCLK; + } + else + { + SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_adc.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_adc.c new file mode 100644 index 0000000..8155dc9 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_adc.c @@ -0,0 +1,1307 @@ +/** + ****************************************************************************** + * @file stm32f10x_adc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the ADC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_adc.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup ADC + * @brief ADC driver modules + * @{ + */ + +/** @defgroup ADC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Defines + * @{ + */ + +/* ADC DISCNUM mask */ +#define CR1_DISCNUM_Reset ((uint32_t)0xFFFF1FFF) + +/* ADC DISCEN mask */ +#define CR1_DISCEN_Set ((uint32_t)0x00000800) +#define CR1_DISCEN_Reset ((uint32_t)0xFFFFF7FF) + +/* ADC JAUTO mask */ +#define CR1_JAUTO_Set ((uint32_t)0x00000400) +#define CR1_JAUTO_Reset ((uint32_t)0xFFFFFBFF) + +/* ADC JDISCEN mask */ +#define CR1_JDISCEN_Set ((uint32_t)0x00001000) +#define CR1_JDISCEN_Reset ((uint32_t)0xFFFFEFFF) + +/* ADC AWDCH mask */ +#define CR1_AWDCH_Reset ((uint32_t)0xFFFFFFE0) + +/* ADC Analog watchdog enable mode mask */ +#define CR1_AWDMode_Reset ((uint32_t)0xFF3FFDFF) + +/* CR1 register Mask */ +#define CR1_CLEAR_Mask ((uint32_t)0xFFF0FEFF) + +/* ADC ADON mask */ +#define CR2_ADON_Set ((uint32_t)0x00000001) +#define CR2_ADON_Reset ((uint32_t)0xFFFFFFFE) + +/* ADC DMA mask */ +#define CR2_DMA_Set ((uint32_t)0x00000100) +#define CR2_DMA_Reset ((uint32_t)0xFFFFFEFF) + +/* ADC RSTCAL mask */ +#define CR2_RSTCAL_Set ((uint32_t)0x00000008) + +/* ADC CAL mask */ +#define CR2_CAL_Set ((uint32_t)0x00000004) + +/* ADC SWSTART mask */ +#define CR2_SWSTART_Set ((uint32_t)0x00400000) + +/* ADC EXTTRIG mask */ +#define CR2_EXTTRIG_Set ((uint32_t)0x00100000) +#define CR2_EXTTRIG_Reset ((uint32_t)0xFFEFFFFF) + +/* ADC Software start mask */ +#define CR2_EXTTRIG_SWSTART_Set ((uint32_t)0x00500000) +#define CR2_EXTTRIG_SWSTART_Reset ((uint32_t)0xFFAFFFFF) + +/* ADC JEXTSEL mask */ +#define CR2_JEXTSEL_Reset ((uint32_t)0xFFFF8FFF) + +/* ADC JEXTTRIG mask */ +#define CR2_JEXTTRIG_Set ((uint32_t)0x00008000) +#define CR2_JEXTTRIG_Reset ((uint32_t)0xFFFF7FFF) + +/* ADC JSWSTART mask */ +#define CR2_JSWSTART_Set ((uint32_t)0x00200000) + +/* ADC injected software start mask */ +#define CR2_JEXTTRIG_JSWSTART_Set ((uint32_t)0x00208000) +#define CR2_JEXTTRIG_JSWSTART_Reset ((uint32_t)0xFFDF7FFF) + +/* ADC TSPD mask */ +#define CR2_TSVREFE_Set ((uint32_t)0x00800000) +#define CR2_TSVREFE_Reset ((uint32_t)0xFF7FFFFF) + +/* CR2 register Mask */ +#define CR2_CLEAR_Mask ((uint32_t)0xFFF1F7FD) + +/* ADC SQx mask */ +#define SQR3_SQ_Set ((uint32_t)0x0000001F) +#define SQR2_SQ_Set ((uint32_t)0x0000001F) +#define SQR1_SQ_Set ((uint32_t)0x0000001F) + +/* SQR1 register Mask */ +#define SQR1_CLEAR_Mask ((uint32_t)0xFF0FFFFF) + +/* ADC JSQx mask */ +#define JSQR_JSQ_Set ((uint32_t)0x0000001F) + +/* ADC JL mask */ +#define JSQR_JL_Set ((uint32_t)0x00300000) +#define JSQR_JL_Reset ((uint32_t)0xFFCFFFFF) + +/* ADC SMPx mask */ +#define SMPR1_SMP_Set ((uint32_t)0x00000007) +#define SMPR2_SMP_Set ((uint32_t)0x00000007) + +/* ADC JDRx registers offset */ +#define JDR_Offset ((uint8_t)0x28) + +/* ADC1 DR register base address */ +#define DR_ADDRESS ((uint32_t)0x4001244C) + +/** + * @} + */ + +/** @defgroup ADC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the ADCx peripheral registers to their default reset values. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_DeInit(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + + if (ADCx == ADC1) + { + /* Enable ADC1 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE); + /* Release ADC1 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE); + } + else if (ADCx == ADC2) + { + /* Enable ADC2 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE); + /* Release ADC2 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE); + } + else + { + if (ADCx == ADC3) + { + /* Enable ADC3 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, ENABLE); + /* Release ADC3 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, DISABLE); + } + } +} + +/** + * @brief Initializes the ADCx peripheral according to the specified parameters + * in the ADC_InitStruct. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains + * the configuration information for the specified ADC peripheral. + * @retval None + */ +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct) +{ + uint32_t tmpreg1 = 0; + uint8_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_MODE(ADC_InitStruct->ADC_Mode)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode)); + assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); + assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv)); + assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); + assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel)); + + /*---------------------------- ADCx CR1 Configuration -----------------*/ + /* Get the ADCx CR1 value */ + tmpreg1 = ADCx->CR1; + /* Clear DUALMOD and SCAN bits */ + tmpreg1 &= CR1_CLEAR_Mask; + /* Configure ADCx: Dual mode and scan conversion mode */ + /* Set DUALMOD bits according to ADC_Mode value */ + /* Set SCAN bit according to ADC_ScanConvMode value */ + tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_Mode | ((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8)); + /* Write to ADCx CR1 */ + ADCx->CR1 = tmpreg1; + + /*---------------------------- ADCx CR2 Configuration -----------------*/ + /* Get the ADCx CR2 value */ + tmpreg1 = ADCx->CR2; + /* Clear CONT, ALIGN and EXTSEL bits */ + tmpreg1 &= CR2_CLEAR_Mask; + /* Configure ADCx: external trigger event and continuous conversion mode */ + /* Set ALIGN bit according to ADC_DataAlign value */ + /* Set EXTSEL bits according to ADC_ExternalTrigConv value */ + /* Set CONT bit according to ADC_ContinuousConvMode value */ + tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv | + ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1)); + /* Write to ADCx CR2 */ + ADCx->CR2 = tmpreg1; + + /*---------------------------- ADCx SQR1 Configuration -----------------*/ + /* Get the ADCx SQR1 value */ + tmpreg1 = ADCx->SQR1; + /* Clear L bits */ + tmpreg1 &= SQR1_CLEAR_Mask; + /* Configure ADCx: regular channel sequence length */ + /* Set L bits according to ADC_NbrOfChannel value */ + tmpreg2 |= (uint8_t) (ADC_InitStruct->ADC_NbrOfChannel - (uint8_t)1); + tmpreg1 |= (uint32_t)tmpreg2 << 20; + /* Write to ADCx SQR1 */ + ADCx->SQR1 = tmpreg1; +} + +/** + * @brief Fills each ADC_InitStruct member with its default value. + * @param ADC_InitStruct : pointer to an ADC_InitTypeDef structure which will be initialized. + * @retval None + */ +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct) +{ + /* Reset ADC init structure parameters values */ + /* Initialize the ADC_Mode member */ + ADC_InitStruct->ADC_Mode = ADC_Mode_Independent; + /* initialize the ADC_ScanConvMode member */ + ADC_InitStruct->ADC_ScanConvMode = DISABLE; + /* Initialize the ADC_ContinuousConvMode member */ + ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; + /* Initialize the ADC_ExternalTrigConv member */ + ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1; + /* Initialize the ADC_DataAlign member */ + ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; + /* Initialize the ADC_NbrOfChannel member */ + ADC_InitStruct->ADC_NbrOfChannel = 1; +} + +/** + * @brief Enables or disables the specified ADC peripheral. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the ADCx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the ADON bit to wake up the ADC from power down mode */ + ADCx->CR2 |= CR2_ADON_Set; + } + else + { + /* Disable the selected ADC peripheral */ + ADCx->CR2 &= CR2_ADON_Reset; + } +} + +/** + * @brief Enables or disables the specified ADC DMA request. + * @param ADCx: where x can be 1 or 3 to select the ADC peripheral. + * Note: ADC2 hasn't a DMA capability. + * @param NewState: new state of the selected ADC DMA transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_DMA_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC DMA request */ + ADCx->CR2 |= CR2_DMA_Set; + } + else + { + /* Disable the selected ADC DMA request */ + ADCx->CR2 &= CR2_DMA_Reset; + } +} + +/** + * @brief Enables or disables the specified ADC interrupts. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @param NewState: new state of the specified ADC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState) +{ + uint8_t itmask = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_ADC_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = (uint8_t)ADC_IT; + if (NewState != DISABLE) + { + /* Enable the selected ADC interrupts */ + ADCx->CR1 |= itmask; + } + else + { + /* Disable the selected ADC interrupts */ + ADCx->CR1 &= (~(uint32_t)itmask); + } +} + +/** + * @brief Resets the selected ADC calibration registers. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_ResetCalibration(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Resets the selected ADC calibration registers */ + ADCx->CR2 |= CR2_RSTCAL_Set; +} + +/** + * @brief Gets the selected ADC reset calibration registers status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC reset calibration registers (SET or RESET). + */ +FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of RSTCAL bit */ + if ((ADCx->CR2 & CR2_RSTCAL_Set) != (uint32_t)RESET) + { + /* RSTCAL bit is set */ + bitstatus = SET; + } + else + { + /* RSTCAL bit is reset */ + bitstatus = RESET; + } + /* Return the RSTCAL bit status */ + return bitstatus; +} + +/** + * @brief Starts the selected ADC calibration process. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval None + */ +void ADC_StartCalibration(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Enable the selected ADC calibration process */ + ADCx->CR2 |= CR2_CAL_Set; +} + +/** + * @brief Gets the selected ADC calibration status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC calibration (SET or RESET). + */ +FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of CAL bit */ + if ((ADCx->CR2 & CR2_CAL_Set) != (uint32_t)RESET) + { + /* CAL bit is set: calibration on going */ + bitstatus = SET; + } + else + { + /* CAL bit is reset: end of calibration */ + bitstatus = RESET; + } + /* Return the CAL bit status */ + return bitstatus; +} + +/** + * @brief Enables or disables the selected ADC software start conversion . + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC software start conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC conversion on external event and start the selected + ADC conversion */ + ADCx->CR2 |= CR2_EXTTRIG_SWSTART_Set; + } + else + { + /* Disable the selected ADC conversion on external event and stop the selected + ADC conversion */ + ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset; + } +} + +/** + * @brief Gets the selected ADC Software start conversion Status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC software start conversion (SET or RESET). + */ +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of SWSTART bit */ + if ((ADCx->CR2 & CR2_SWSTART_Set) != (uint32_t)RESET) + { + /* SWSTART bit is set */ + bitstatus = SET; + } + else + { + /* SWSTART bit is reset */ + bitstatus = RESET; + } + /* Return the SWSTART bit status */ + return bitstatus; +} + +/** + * @brief Configures the discontinuous mode for the selected ADC regular + * group channel. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param Number: specifies the discontinuous mode regular channel + * count value. This number must be between 1 and 8. + * @retval None + */ +void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number)); + /* Get the old register value */ + tmpreg1 = ADCx->CR1; + /* Clear the old discontinuous mode channel count */ + tmpreg1 &= CR1_DISCNUM_Reset; + /* Set the discontinuous mode channel count */ + tmpreg2 = Number - 1; + tmpreg1 |= tmpreg2 << 13; + /* Store the new register value */ + ADCx->CR1 = tmpreg1; +} + +/** + * @brief Enables or disables the discontinuous mode on regular group + * channel for the specified ADC + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC discontinuous mode + * on regular group channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC regular discontinuous mode */ + ADCx->CR1 |= CR1_DISCEN_Set; + } + else + { + /* Disable the selected ADC regular discontinuous mode */ + ADCx->CR1 &= CR1_DISCEN_Reset; + } +} + +/** + * @brief Configures for the selected ADC regular channel its corresponding + * rank in the sequencer and its sample time. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @param Rank: The rank in the regular group sequencer. This parameter must be between 1 to 16. + * @param ADC_SampleTime: The sample time value to be set for the selected channel. + * This parameter can be one of the following values: + * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles + * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles + * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles + * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles + * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles + * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles + * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles + * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles + * @retval None + */ +void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_REGULAR_RANK(Rank)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ + if (ADC_Channel > ADC_Channel_9) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR1; + /* Calculate the mask to clear */ + tmpreg2 = SMPR1_SMP_Set << (3 * (ADC_Channel - 10)); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10)); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR1 = tmpreg1; + } + else /* ADC_Channel include in ADC_Channel_[0..9] */ + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR2; + /* Calculate the mask to clear */ + tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR2 = tmpreg1; + } + /* For Rank 1 to 6 */ + if (Rank < 7) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR3; + /* Calculate the mask to clear */ + tmpreg2 = SQR3_SQ_Set << (5 * (Rank - 1)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR3 = tmpreg1; + } + /* For Rank 7 to 12 */ + else if (Rank < 13) + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR2; + /* Calculate the mask to clear */ + tmpreg2 = SQR2_SQ_Set << (5 * (Rank - 7)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR2 = tmpreg1; + } + /* For Rank 13 to 16 */ + else + { + /* Get the old register value */ + tmpreg1 = ADCx->SQR1; + /* Calculate the mask to clear */ + tmpreg2 = SQR1_SQ_Set << (5 * (Rank - 13)); + /* Clear the old SQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13)); + /* Set the SQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SQR1 = tmpreg1; + } +} + +/** + * @brief Enables or disables the ADCx conversion through external trigger. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC external trigger start of conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC conversion on external event */ + ADCx->CR2 |= CR2_EXTTRIG_Set; + } + else + { + /* Disable the selected ADC conversion on external event */ + ADCx->CR2 &= CR2_EXTTRIG_Reset; + } +} + +/** + * @brief Returns the last ADCx conversion result data for regular channel. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The Data conversion value. + */ +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Return the selected ADC conversion value */ + return (uint16_t) ADCx->DR; +} + +/** + * @brief Returns the last ADC1 and ADC2 conversion result data in dual mode. + * @retval The Data conversion value. + */ +uint32_t ADC_GetDualModeConversionValue(void) +{ + /* Return the dual mode conversion value */ + return (*(__IO uint32_t *) DR_ADDRESS); +} + +/** + * @brief Enables or disables the selected ADC automatic injected group + * conversion after regular one. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC auto injected conversion + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC automatic injected group conversion */ + ADCx->CR1 |= CR1_JAUTO_Set; + } + else + { + /* Disable the selected ADC automatic injected group conversion */ + ADCx->CR1 &= CR1_JAUTO_Reset; + } +} + +/** + * @brief Enables or disables the discontinuous mode for injected group + * channel for the specified ADC + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC discontinuous mode + * on injected group channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC injected discontinuous mode */ + ADCx->CR1 |= CR1_JDISCEN_Set; + } + else + { + /* Disable the selected ADC injected discontinuous mode */ + ADCx->CR1 &= CR1_JDISCEN_Reset; + } +} + +/** + * @brief Configures the ADCx external trigger for injected channels conversion. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion. + * This parameter can be one of the following values: + * @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3) + * @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3) + * @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8 + * capture compare4 event selected (for ADC1 and ADC2) + * @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only) + * @arg ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not + * by external trigger (for ADC1, ADC2 and ADC3) + * @retval None + */ +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv)); + /* Get the old register value */ + tmpreg = ADCx->CR2; + /* Clear the old external event selection for injected group */ + tmpreg &= CR2_JEXTSEL_Reset; + /* Set the external event selection for injected group */ + tmpreg |= ADC_ExternalTrigInjecConv; + /* Store the new register value */ + ADCx->CR2 = tmpreg; +} + +/** + * @brief Enables or disables the ADCx injected channels conversion through + * external trigger + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC external trigger start of + * injected conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC external event selection for injected group */ + ADCx->CR2 |= CR2_JEXTTRIG_Set; + } + else + { + /* Disable the selected ADC external event selection for injected group */ + ADCx->CR2 &= CR2_JEXTTRIG_Reset; + } +} + +/** + * @brief Enables or disables the selected ADC start of the injected + * channels conversion. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param NewState: new state of the selected ADC software start injected conversion. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected ADC conversion for injected group on external event and start the selected + ADC injected conversion */ + ADCx->CR2 |= CR2_JEXTTRIG_JSWSTART_Set; + } + else + { + /* Disable the selected ADC conversion on external event for injected group and stop the selected + ADC injected conversion */ + ADCx->CR2 &= CR2_JEXTTRIG_JSWSTART_Reset; + } +} + +/** + * @brief Gets the selected ADC Software start injected conversion Status. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @retval The new state of ADC software start injected conversion (SET or RESET). + */ +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + /* Check the status of JSWSTART bit */ + if ((ADCx->CR2 & CR2_JSWSTART_Set) != (uint32_t)RESET) + { + /* JSWSTART bit is set */ + bitstatus = SET; + } + else + { + /* JSWSTART bit is reset */ + bitstatus = RESET; + } + /* Return the JSWSTART bit status */ + return bitstatus; +} + +/** + * @brief Configures for the selected ADC injected channel its corresponding + * rank in the sequencer and its sample time. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @param Rank: The rank in the injected group sequencer. This parameter must be between 1 and 4. + * @param ADC_SampleTime: The sample time value to be set for the selected channel. + * This parameter can be one of the following values: + * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles + * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles + * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles + * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles + * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles + * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles + * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles + * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles + * @retval None + */ +void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + assert_param(IS_ADC_INJECTED_RANK(Rank)); + assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); + /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ + if (ADC_Channel > ADC_Channel_9) + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR1; + /* Calculate the mask to clear */ + tmpreg2 = SMPR1_SMP_Set << (3*(ADC_Channel - 10)); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3*(ADC_Channel - 10)); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR1 = tmpreg1; + } + else /* ADC_Channel include in ADC_Channel_[0..9] */ + { + /* Get the old register value */ + tmpreg1 = ADCx->SMPR2; + /* Calculate the mask to clear */ + tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); + /* Clear the old channel sample time */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set */ + tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); + /* Set the new channel sample time */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->SMPR2 = tmpreg1; + } + /* Rank configuration */ + /* Get the old register value */ + tmpreg1 = ADCx->JSQR; + /* Get JL value: Number = JL+1 */ + tmpreg3 = (tmpreg1 & JSQR_JL_Set)>> 20; + /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */ + tmpreg2 = JSQR_JSQ_Set << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); + /* Clear the old JSQx bits for the selected rank */ + tmpreg1 &= ~tmpreg2; + /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */ + tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); + /* Set the JSQx bits for the selected rank */ + tmpreg1 |= tmpreg2; + /* Store the new register value */ + ADCx->JSQR = tmpreg1; +} + +/** + * @brief Configures the sequencer length for injected channels + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param Length: The sequencer length. + * This parameter must be a number between 1 to 4. + * @retval None + */ +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length) +{ + uint32_t tmpreg1 = 0; + uint32_t tmpreg2 = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_LENGTH(Length)); + + /* Get the old register value */ + tmpreg1 = ADCx->JSQR; + /* Clear the old injected sequnence lenght JL bits */ + tmpreg1 &= JSQR_JL_Reset; + /* Set the injected sequnence lenght JL bits */ + tmpreg2 = Length - 1; + tmpreg1 |= tmpreg2 << 20; + /* Store the new register value */ + ADCx->JSQR = tmpreg1; +} + +/** + * @brief Set the injected channels conversion value offset + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InjectedChannel: the ADC injected channel to set its offset. + * This parameter can be one of the following values: + * @arg ADC_InjectedChannel_1: Injected Channel1 selected + * @arg ADC_InjectedChannel_2: Injected Channel2 selected + * @arg ADC_InjectedChannel_3: Injected Channel3 selected + * @arg ADC_InjectedChannel_4: Injected Channel4 selected + * @param Offset: the offset value for the selected ADC injected channel + * This parameter must be a 12bit value. + * @retval None + */ +void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); + assert_param(IS_ADC_OFFSET(Offset)); + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel; + + /* Set the selected injected channel data offset */ + *(__IO uint32_t *) tmp = (uint32_t)Offset; +} + +/** + * @brief Returns the ADC injected channel conversion result + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_InjectedChannel: the converted ADC injected channel. + * This parameter can be one of the following values: + * @arg ADC_InjectedChannel_1: Injected Channel1 selected + * @arg ADC_InjectedChannel_2: Injected Channel2 selected + * @arg ADC_InjectedChannel_3: Injected Channel3 selected + * @arg ADC_InjectedChannel_4: Injected Channel4 selected + * @retval The Data conversion value. + */ +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); + + tmp = (uint32_t)ADCx; + tmp += ADC_InjectedChannel + JDR_Offset; + + /* Returns the selected injected channel conversion data value */ + return (uint16_t) (*(__IO uint32_t*) tmp); +} + +/** + * @brief Enables or disables the analog watchdog on single/all regular + * or injected channels + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_AnalogWatchdog: the ADC analog watchdog configuration. + * This parameter can be one of the following values: + * @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel + * @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel + * @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel + * @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel + * @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel + * @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels + * @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog + * @retval None + */ +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog)); + /* Get the old register value */ + tmpreg = ADCx->CR1; + /* Clear AWDEN, AWDENJ and AWDSGL bits */ + tmpreg &= CR1_AWDMode_Reset; + /* Set the analog watchdog enable mode */ + tmpreg |= ADC_AnalogWatchdog; + /* Store the new register value */ + ADCx->CR1 = tmpreg; +} + +/** + * @brief Configures the high and low thresholds of the analog watchdog. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param HighThreshold: the ADC analog watchdog High threshold value. + * This parameter must be a 12bit value. + * @param LowThreshold: the ADC analog watchdog Low threshold value. + * This parameter must be a 12bit value. + * @retval None + */ +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, + uint16_t LowThreshold) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_THRESHOLD(HighThreshold)); + assert_param(IS_ADC_THRESHOLD(LowThreshold)); + /* Set the ADCx high threshold */ + ADCx->HTR = HighThreshold; + /* Set the ADCx low threshold */ + ADCx->LTR = LowThreshold; +} + +/** + * @brief Configures the analog watchdog guarded single channel + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_Channel: the ADC channel to configure for the analog watchdog. + * This parameter can be one of the following values: + * @arg ADC_Channel_0: ADC Channel0 selected + * @arg ADC_Channel_1: ADC Channel1 selected + * @arg ADC_Channel_2: ADC Channel2 selected + * @arg ADC_Channel_3: ADC Channel3 selected + * @arg ADC_Channel_4: ADC Channel4 selected + * @arg ADC_Channel_5: ADC Channel5 selected + * @arg ADC_Channel_6: ADC Channel6 selected + * @arg ADC_Channel_7: ADC Channel7 selected + * @arg ADC_Channel_8: ADC Channel8 selected + * @arg ADC_Channel_9: ADC Channel9 selected + * @arg ADC_Channel_10: ADC Channel10 selected + * @arg ADC_Channel_11: ADC Channel11 selected + * @arg ADC_Channel_12: ADC Channel12 selected + * @arg ADC_Channel_13: ADC Channel13 selected + * @arg ADC_Channel_14: ADC Channel14 selected + * @arg ADC_Channel_15: ADC Channel15 selected + * @arg ADC_Channel_16: ADC Channel16 selected + * @arg ADC_Channel_17: ADC Channel17 selected + * @retval None + */ +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CHANNEL(ADC_Channel)); + /* Get the old register value */ + tmpreg = ADCx->CR1; + /* Clear the Analog watchdog channel select bits */ + tmpreg &= CR1_AWDCH_Reset; + /* Set the Analog watchdog channel */ + tmpreg |= ADC_Channel; + /* Store the new register value */ + ADCx->CR1 = tmpreg; +} + +/** + * @brief Enables or disables the temperature sensor and Vrefint channel. + * @param NewState: new state of the temperature sensor. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void ADC_TempSensorVrefintCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the temperature sensor and Vrefint channel*/ + ADC1->CR2 |= CR2_TSVREFE_Set; + } + else + { + /* Disable the temperature sensor and Vrefint channel*/ + ADC1->CR2 &= CR2_TSVREFE_Reset; + } +} + +/** + * @brief Checks whether the specified ADC flag is set or not. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_JEOC: End of injected group conversion flag + * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag + * @arg ADC_FLAG_STRT: Start of regular group conversion flag + * @retval The new state of ADC_FLAG (SET or RESET). + */ +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_GET_FLAG(ADC_FLAG)); + /* Check the status of the specified ADC flag */ + if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET) + { + /* ADC_FLAG is set */ + bitstatus = SET; + } + else + { + /* ADC_FLAG is reset */ + bitstatus = RESET; + } + /* Return the ADC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's pending flags. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg ADC_FLAG_AWD: Analog watchdog flag + * @arg ADC_FLAG_EOC: End of conversion flag + * @arg ADC_FLAG_JEOC: End of injected group conversion flag + * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag + * @arg ADC_FLAG_STRT: Start of regular group conversion flag + * @retval None + */ +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG)); + /* Clear the selected ADC flags */ + ADCx->SR = ~(uint32_t)ADC_FLAG; +} + +/** + * @brief Checks whether the specified ADC interrupt has occurred or not. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt source to check. + * This parameter can be one of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @retval The new state of ADC_IT (SET or RESET). + */ +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t itmask = 0, enablestatus = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_GET_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = ADC_IT >> 8; + /* Get the ADC_IT enable bit status */ + enablestatus = (ADCx->CR1 & (uint8_t)ADC_IT) ; + /* Check the status of the specified ADC interrupt */ + if (((ADCx->SR & itmask) != (uint32_t)RESET) && enablestatus) + { + /* ADC_IT is set */ + bitstatus = SET; + } + else + { + /* ADC_IT is reset */ + bitstatus = RESET; + } + /* Return the ADC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the ADCx's interrupt pending bits. + * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. + * @param ADC_IT: specifies the ADC interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg ADC_IT_EOC: End of conversion interrupt mask + * @arg ADC_IT_AWD: Analog watchdog interrupt mask + * @arg ADC_IT_JEOC: End of injected conversion interrupt mask + * @retval None + */ +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT) +{ + uint8_t itmask = 0; + /* Check the parameters */ + assert_param(IS_ADC_ALL_PERIPH(ADCx)); + assert_param(IS_ADC_IT(ADC_IT)); + /* Get the ADC IT index */ + itmask = (uint8_t)(ADC_IT >> 8); + /* Clear the selected ADC interrupt pending bits */ + ADCx->SR = ~(uint32_t)itmask; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_bkp.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_bkp.c new file mode 100644 index 0000000..997eecc --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_bkp.c @@ -0,0 +1,308 @@ +/** + ****************************************************************************** + * @file stm32f10x_bkp.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the BKP firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_bkp.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup BKP + * @brief BKP driver modules + * @{ + */ + +/** @defgroup BKP_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_Defines + * @{ + */ + +/* ------------ BKP registers bit address in the alias region --------------- */ +#define BKP_OFFSET (BKP_BASE - PERIPH_BASE) + +/* --- CR Register ----*/ + +/* Alias word address of TPAL bit */ +#define CR_OFFSET (BKP_OFFSET + 0x30) +#define TPAL_BitNumber 0x01 +#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4)) + +/* Alias word address of TPE bit */ +#define TPE_BitNumber 0x00 +#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of TPIE bit */ +#define CSR_OFFSET (BKP_OFFSET + 0x34) +#define TPIE_BitNumber 0x02 +#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4)) + +/* Alias word address of TIF bit */ +#define TIF_BitNumber 0x09 +#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4)) + +/* Alias word address of TEF bit */ +#define TEF_BitNumber 0x08 +#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4)) + +/* ---------------------- BKP registers bit mask ------------------------ */ + +/* RTCCR register bit mask */ +#define RTCCR_CAL_MASK ((uint16_t)0xFF80) +#define RTCCR_MASK ((uint16_t)0xFC7F) + +/** + * @} + */ + + +/** @defgroup BKP_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup BKP_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the BKP peripheral registers to their default reset values. + * @param None + * @retval None + */ +void BKP_DeInit(void) +{ + RCC_BackupResetCmd(ENABLE); + RCC_BackupResetCmd(DISABLE); +} + +/** + * @brief Configures the Tamper Pin active level. + * @param BKP_TamperPinLevel: specifies the Tamper Pin active level. + * This parameter can be one of the following values: + * @arg BKP_TamperPinLevel_High: Tamper pin active on high level + * @arg BKP_TamperPinLevel_Low: Tamper pin active on low level + * @retval None + */ +void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel) +{ + /* Check the parameters */ + assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel)); + *(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel; +} + +/** + * @brief Enables or disables the Tamper Pin activation. + * @param NewState: new state of the Tamper Pin activation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void BKP_TamperPinCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Tamper Pin Interrupt. + * @param NewState: new state of the Tamper Pin Interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void BKP_ITConfig(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState; +} + +/** + * @brief Select the RTC output source to output on the Tamper pin. + * @param BKP_RTCOutputSource: specifies the RTC output source. + * This parameter can be one of the following values: + * @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin. + * @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency + * divided by 64 on the Tamper pin. + * @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on + * the Tamper pin. + * @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on + * the Tamper pin. + * @retval None + */ +void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource) +{ + uint16_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource)); + tmpreg = BKP->RTCCR; + /* Clear CCO, ASOE and ASOS bits */ + tmpreg &= RTCCR_MASK; + + /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */ + tmpreg |= BKP_RTCOutputSource; + /* Store the new value */ + BKP->RTCCR = tmpreg; +} + +/** + * @brief Sets RTC Clock Calibration value. + * @param CalibrationValue: specifies the RTC Clock Calibration value. + * This parameter must be a number between 0 and 0x7F. + * @retval None + */ +void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue) +{ + uint16_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue)); + tmpreg = BKP->RTCCR; + /* Clear CAL[6:0] bits */ + tmpreg &= RTCCR_CAL_MASK; + /* Set CAL[6:0] bits according to CalibrationValue value */ + tmpreg |= CalibrationValue; + /* Store the new value */ + BKP->RTCCR = tmpreg; +} + +/** + * @brief Writes user data to the specified Data Backup Register. + * @param BKP_DR: specifies the Data Backup Register. + * This parameter can be BKP_DRx where x:[1, 42] + * @param Data: data to write + * @retval None + */ +void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_BKP_DR(BKP_DR)); + + tmp = (uint32_t)BKP_BASE; + tmp += BKP_DR; + + *(__IO uint32_t *) tmp = Data; +} + +/** + * @brief Reads data from the specified Data Backup Register. + * @param BKP_DR: specifies the Data Backup Register. + * This parameter can be BKP_DRx where x:[1, 42] + * @retval The content of the specified Data Backup Register + */ +uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_BKP_DR(BKP_DR)); + + tmp = (uint32_t)BKP_BASE; + tmp += BKP_DR; + + return (*(__IO uint16_t *) tmp); +} + +/** + * @brief Checks whether the Tamper Pin Event flag is set or not. + * @param None + * @retval The new state of the Tamper Pin Event flag (SET or RESET). + */ +FlagStatus BKP_GetFlagStatus(void) +{ + return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB); +} + +/** + * @brief Clears Tamper Pin Event pending flag. + * @param None + * @retval None + */ +void BKP_ClearFlag(void) +{ + /* Set CTE bit to clear Tamper Pin Event flag */ + BKP->CSR |= BKP_CSR_CTE; +} + +/** + * @brief Checks whether the Tamper Pin Interrupt has occurred or not. + * @param None + * @retval The new state of the Tamper Pin Interrupt (SET or RESET). + */ +ITStatus BKP_GetITStatus(void) +{ + return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB); +} + +/** + * @brief Clears Tamper Pin Interrupt pending bit. + * @param None + * @retval None + */ +void BKP_ClearITPendingBit(void) +{ + /* Set CTI bit to clear Tamper Pin Interrupt pending bit */ + BKP->CSR |= BKP_CSR_CTI; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_can.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_can.c new file mode 100644 index 0000000..ec8e049 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_can.c @@ -0,0 +1,1415 @@ +/** + ****************************************************************************** + * @file stm32f10x_can.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the CAN firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_can.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup CAN + * @brief CAN driver modules + * @{ + */ + +/** @defgroup CAN_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Private_Defines + * @{ + */ + +/* CAN Master Control Register bits */ + +#define MCR_DBF ((uint32_t)0x00010000) /* software master reset */ + +/* CAN Mailbox Transmit Request */ +#define TMIDxR_TXRQ ((uint32_t)0x00000001) /* Transmit mailbox request */ + +/* CAN Filter Master Register bits */ +#define FMR_FINIT ((uint32_t)0x00000001) /* Filter init mode */ + +/* Time out for INAK bit */ +#define INAK_TIMEOUT ((uint32_t)0x0000FFFF) +/* Time out for SLAK bit */ +#define SLAK_TIMEOUT ((uint32_t)0x0000FFFF) + + + +/* Flags in TSR register */ +#define CAN_FLAGS_TSR ((uint32_t)0x08000000) +/* Flags in RF1R register */ +#define CAN_FLAGS_RF1R ((uint32_t)0x04000000) +/* Flags in RF0R register */ +#define CAN_FLAGS_RF0R ((uint32_t)0x02000000) +/* Flags in MSR register */ +#define CAN_FLAGS_MSR ((uint32_t)0x01000000) +/* Flags in ESR register */ +#define CAN_FLAGS_ESR ((uint32_t)0x00F00000) + +/* Mailboxes definition */ +#define CAN_TXMAILBOX_0 ((uint8_t)0x00) +#define CAN_TXMAILBOX_1 ((uint8_t)0x01) +#define CAN_TXMAILBOX_2 ((uint8_t)0x02) + + + +#define CAN_MODE_MASK ((uint32_t) 0x00000003) +/** + * @} + */ + +/** @defgroup CAN_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup CAN_Private_FunctionPrototypes + * @{ + */ + +static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit); + +/** + * @} + */ + +/** @defgroup CAN_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the CAN peripheral registers to their default reset values. + * @param CANx: where x can be 1 or 2 to select the CAN peripheral. + * @retval None. + */ +void CAN_DeInit(CAN_TypeDef* CANx) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + if (CANx == CAN1) + { + /* Enable CAN1 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, ENABLE); + /* Release CAN1 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, DISABLE); + } + else + { + /* Enable CAN2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, ENABLE); + /* Release CAN2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, DISABLE); + } +} + +/** + * @brief Initializes the CAN peripheral according to the specified + * parameters in the CAN_InitStruct. + * @param CANx: where x can be 1 or 2 to to select the CAN + * peripheral. + * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure that + * contains the configuration information for the + * CAN peripheral. + * @retval Constant indicates initialization succeed which will be + * CAN_InitStatus_Failed or CAN_InitStatus_Success. + */ +uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct) +{ + uint8_t InitStatus = CAN_InitStatus_Failed; + uint32_t wait_ack = 0x00000000; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM)); + assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP)); + assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode)); + assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW)); + assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1)); + assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2)); + assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler)); + + /* Exit from sleep mode */ + CANx->MCR &= (~(uint32_t)CAN_MCR_SLEEP); + + /* Request initialisation */ + CANx->MCR |= CAN_MCR_INRQ ; + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT)) + { + wait_ack++; + } + + /* Check acknowledge */ + if ((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) + { + InitStatus = CAN_InitStatus_Failed; + } + else + { + /* Set the time triggered communication mode */ + if (CAN_InitStruct->CAN_TTCM == ENABLE) + { + CANx->MCR |= CAN_MCR_TTCM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_TTCM; + } + + /* Set the automatic bus-off management */ + if (CAN_InitStruct->CAN_ABOM == ENABLE) + { + CANx->MCR |= CAN_MCR_ABOM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_ABOM; + } + + /* Set the automatic wake-up mode */ + if (CAN_InitStruct->CAN_AWUM == ENABLE) + { + CANx->MCR |= CAN_MCR_AWUM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_AWUM; + } + + /* Set the no automatic retransmission */ + if (CAN_InitStruct->CAN_NART == ENABLE) + { + CANx->MCR |= CAN_MCR_NART; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_NART; + } + + /* Set the receive FIFO locked mode */ + if (CAN_InitStruct->CAN_RFLM == ENABLE) + { + CANx->MCR |= CAN_MCR_RFLM; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_RFLM; + } + + /* Set the transmit FIFO priority */ + if (CAN_InitStruct->CAN_TXFP == ENABLE) + { + CANx->MCR |= CAN_MCR_TXFP; + } + else + { + CANx->MCR &= ~(uint32_t)CAN_MCR_TXFP; + } + + /* Set the bit timing register */ + CANx->BTR = (uint32_t)((uint32_t)CAN_InitStruct->CAN_Mode << 30) | \ + ((uint32_t)CAN_InitStruct->CAN_SJW << 24) | \ + ((uint32_t)CAN_InitStruct->CAN_BS1 << 16) | \ + ((uint32_t)CAN_InitStruct->CAN_BS2 << 20) | \ + ((uint32_t)CAN_InitStruct->CAN_Prescaler - 1); + + /* Request leave initialisation */ + CANx->MCR &= ~(uint32_t)CAN_MCR_INRQ; + + /* Wait the acknowledge */ + wait_ack = 0; + + while (((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT)) + { + wait_ack++; + } + + /* ...and check acknowledged */ + if ((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) + { + InitStatus = CAN_InitStatus_Failed; + } + else + { + InitStatus = CAN_InitStatus_Success ; + } + } + + /* At this step, return the status of initialization */ + return InitStatus; +} + +/** + * @brief Initializes the CAN peripheral according to the specified + * parameters in the CAN_FilterInitStruct. + * @param CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef + * structure that contains the configuration + * information. + * @retval None. + */ +void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct) +{ + uint32_t filter_number_bit_pos = 0; + /* Check the parameters */ + assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber)); + assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode)); + assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale)); + assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment)); + assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation)); + + filter_number_bit_pos = ((uint32_t)1) << CAN_FilterInitStruct->CAN_FilterNumber; + + /* Initialisation mode for the filter */ + CAN1->FMR |= FMR_FINIT; + + /* Filter Deactivation */ + CAN1->FA1R &= ~(uint32_t)filter_number_bit_pos; + + /* Filter Scale */ + if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit) + { + /* 16-bit scale for the filter */ + CAN1->FS1R &= ~(uint32_t)filter_number_bit_pos; + + /* First 16-bit identifier and First 16-bit mask */ + /* Or First 16-bit identifier and Second 16-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); + + /* Second 16-bit identifier and Second 16-bit mask */ + /* Or Third 16-bit identifier and Fourth 16-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh); + } + + if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit) + { + /* 32-bit scale for the filter */ + CAN1->FS1R |= filter_number_bit_pos; + /* 32-bit identifier or First 32-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); + /* 32-bit mask or Second 32-bit identifier */ + CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = + ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | + (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow); + } + + /* Filter Mode */ + if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask) + { + /*Id/Mask mode for the filter*/ + CAN1->FM1R &= ~(uint32_t)filter_number_bit_pos; + } + else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */ + { + /*Identifier list mode for the filter*/ + CAN1->FM1R |= (uint32_t)filter_number_bit_pos; + } + + /* Filter FIFO assignment */ + if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO0) + { + /* FIFO 0 assignation for the filter */ + CAN1->FFA1R &= ~(uint32_t)filter_number_bit_pos; + } + + if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO1) + { + /* FIFO 1 assignation for the filter */ + CAN1->FFA1R |= (uint32_t)filter_number_bit_pos; + } + + /* Filter activation */ + if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE) + { + CAN1->FA1R |= filter_number_bit_pos; + } + + /* Leave the initialisation mode for the filter */ + CAN1->FMR &= ~FMR_FINIT; +} + +/** + * @brief Fills each CAN_InitStruct member with its default value. + * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure which + * will be initialized. + * @retval None. + */ +void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct) +{ + /* Reset CAN init structure parameters values */ + + /* Initialize the time triggered communication mode */ + CAN_InitStruct->CAN_TTCM = DISABLE; + + /* Initialize the automatic bus-off management */ + CAN_InitStruct->CAN_ABOM = DISABLE; + + /* Initialize the automatic wake-up mode */ + CAN_InitStruct->CAN_AWUM = DISABLE; + + /* Initialize the no automatic retransmission */ + CAN_InitStruct->CAN_NART = DISABLE; + + /* Initialize the receive FIFO locked mode */ + CAN_InitStruct->CAN_RFLM = DISABLE; + + /* Initialize the transmit FIFO priority */ + CAN_InitStruct->CAN_TXFP = DISABLE; + + /* Initialize the CAN_Mode member */ + CAN_InitStruct->CAN_Mode = CAN_Mode_Normal; + + /* Initialize the CAN_SJW member */ + CAN_InitStruct->CAN_SJW = CAN_SJW_1tq; + + /* Initialize the CAN_BS1 member */ + CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq; + + /* Initialize the CAN_BS2 member */ + CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq; + + /* Initialize the CAN_Prescaler member */ + CAN_InitStruct->CAN_Prescaler = 1; +} + +/** + * @brief Select the start bank filter for slave CAN. + * @note This function applies only to STM32 Connectivity line devices. + * @param CAN_BankNumber: Select the start slave bank filter from 1..27. + * @retval None. + */ +void CAN_SlaveStartBank(uint8_t CAN_BankNumber) +{ + /* Check the parameters */ + assert_param(IS_CAN_BANKNUMBER(CAN_BankNumber)); + + /* Enter Initialisation mode for the filter */ + CAN1->FMR |= FMR_FINIT; + + /* Select the start slave bank */ + CAN1->FMR &= (uint32_t)0xFFFFC0F1 ; + CAN1->FMR |= (uint32_t)(CAN_BankNumber)<<8; + + /* Leave Initialisation mode for the filter */ + CAN1->FMR &= ~FMR_FINIT; +} + +/** + * @brief Enables or disables the DBG Freeze for CAN. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param NewState: new state of the CAN peripheral. This parameter can + * be: ENABLE or DISABLE. + * @retval None. + */ +void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable Debug Freeze */ + CANx->MCR |= MCR_DBF; + } + else + { + /* Disable Debug Freeze */ + CANx->MCR &= ~MCR_DBF; + } +} + + +/** + * @brief Enables or disabes the CAN Time TriggerOperation communication mode. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param NewState : Mode new state , can be one of @ref FunctionalState. + * @note when enabled, Time stamp (TIME[15:0]) value is sent in the last + * two data bytes of the 8-byte message: TIME[7:0] in data byte 6 + * and TIME[15:8] in data byte 7 + * @note DLC must be programmed as 8 in order Time Stamp (2 bytes) to be + * sent over the CAN bus. + * @retval None + */ +void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the TTCM mode */ + CANx->MCR |= CAN_MCR_TTCM; + + /* Set TGT bits */ + CANx->sTxMailBox[0].TDTR |= ((uint32_t)CAN_TDT0R_TGT); + CANx->sTxMailBox[1].TDTR |= ((uint32_t)CAN_TDT1R_TGT); + CANx->sTxMailBox[2].TDTR |= ((uint32_t)CAN_TDT2R_TGT); + } + else + { + /* Disable the TTCM mode */ + CANx->MCR &= (uint32_t)(~(uint32_t)CAN_MCR_TTCM); + + /* Reset TGT bits */ + CANx->sTxMailBox[0].TDTR &= ((uint32_t)~CAN_TDT0R_TGT); + CANx->sTxMailBox[1].TDTR &= ((uint32_t)~CAN_TDT1R_TGT); + CANx->sTxMailBox[2].TDTR &= ((uint32_t)~CAN_TDT2R_TGT); + } +} +/** + * @brief Initiates the transmission of a message. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param TxMessage: pointer to a structure which contains CAN Id, CAN + * DLC and CAN data. + * @retval The number of the mailbox that is used for transmission + * or CAN_TxStatus_NoMailBox if there is no empty mailbox. + */ +uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage) +{ + uint8_t transmit_mailbox = 0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IDTYPE(TxMessage->IDE)); + assert_param(IS_CAN_RTR(TxMessage->RTR)); + assert_param(IS_CAN_DLC(TxMessage->DLC)); + + /* Select one empty transmit mailbox */ + if ((CANx->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) + { + transmit_mailbox = 0; + } + else if ((CANx->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) + { + transmit_mailbox = 1; + } + else if ((CANx->TSR&CAN_TSR_TME2) == CAN_TSR_TME2) + { + transmit_mailbox = 2; + } + else + { + transmit_mailbox = CAN_TxStatus_NoMailBox; + } + + if (transmit_mailbox != CAN_TxStatus_NoMailBox) + { + /* Set up the Id */ + CANx->sTxMailBox[transmit_mailbox].TIR &= TMIDxR_TXRQ; + if (TxMessage->IDE == CAN_Id_Standard) + { + assert_param(IS_CAN_STDID(TxMessage->StdId)); + CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->StdId << 21) | \ + TxMessage->RTR); + } + else + { + assert_param(IS_CAN_EXTID(TxMessage->ExtId)); + CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->ExtId << 3) | \ + TxMessage->IDE | \ + TxMessage->RTR); + } + + /* Set up the DLC */ + TxMessage->DLC &= (uint8_t)0x0000000F; + CANx->sTxMailBox[transmit_mailbox].TDTR &= (uint32_t)0xFFFFFFF0; + CANx->sTxMailBox[transmit_mailbox].TDTR |= TxMessage->DLC; + + /* Set up the data field */ + CANx->sTxMailBox[transmit_mailbox].TDLR = (((uint32_t)TxMessage->Data[3] << 24) | + ((uint32_t)TxMessage->Data[2] << 16) | + ((uint32_t)TxMessage->Data[1] << 8) | + ((uint32_t)TxMessage->Data[0])); + CANx->sTxMailBox[transmit_mailbox].TDHR = (((uint32_t)TxMessage->Data[7] << 24) | + ((uint32_t)TxMessage->Data[6] << 16) | + ((uint32_t)TxMessage->Data[5] << 8) | + ((uint32_t)TxMessage->Data[4])); + /* Request transmission */ + CANx->sTxMailBox[transmit_mailbox].TIR |= TMIDxR_TXRQ; + } + return transmit_mailbox; +} + +/** + * @brief Checks the transmission of a message. + * @param CANx: where x can be 1 or 2 to to select the + * CAN peripheral. + * @param TransmitMailbox: the number of the mailbox that is used for + * transmission. + * @retval CAN_TxStatus_Ok if the CAN driver transmits the message, CAN_TxStatus_Failed + * in an other case. + */ +uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox) +{ + uint32_t state = 0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox)); + + switch (TransmitMailbox) + { + case (CAN_TXMAILBOX_0): + state = CANx->TSR & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0); + break; + case (CAN_TXMAILBOX_1): + state = CANx->TSR & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1); + break; + case (CAN_TXMAILBOX_2): + state = CANx->TSR & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2); + break; + default: + state = CAN_TxStatus_Failed; + break; + } + switch (state) + { + /* transmit pending */ + case (0x0): state = CAN_TxStatus_Pending; + break; + /* transmit failed */ + case (CAN_TSR_RQCP0 | CAN_TSR_TME0): state = CAN_TxStatus_Failed; + break; + case (CAN_TSR_RQCP1 | CAN_TSR_TME1): state = CAN_TxStatus_Failed; + break; + case (CAN_TSR_RQCP2 | CAN_TSR_TME2): state = CAN_TxStatus_Failed; + break; + /* transmit succeeded */ + case (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0):state = CAN_TxStatus_Ok; + break; + case (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1):state = CAN_TxStatus_Ok; + break; + case (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2):state = CAN_TxStatus_Ok; + break; + default: state = CAN_TxStatus_Failed; + break; + } + return (uint8_t) state; +} + +/** + * @brief Cancels a transmit request. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param Mailbox: Mailbox number. + * @retval None. + */ +void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox)); + /* abort transmission */ + switch (Mailbox) + { + case (CAN_TXMAILBOX_0): CANx->TSR |= CAN_TSR_ABRQ0; + break; + case (CAN_TXMAILBOX_1): CANx->TSR |= CAN_TSR_ABRQ1; + break; + case (CAN_TXMAILBOX_2): CANx->TSR |= CAN_TSR_ABRQ2; + break; + default: + break; + } +} + + +/** + * @brief Receives a message. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @param RxMessage: pointer to a structure receive message which contains + * CAN Id, CAN DLC, CAN datas and FMI number. + * @retval None. + */ +void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + /* Get the Id */ + RxMessage->IDE = (uint8_t)0x04 & CANx->sFIFOMailBox[FIFONumber].RIR; + if (RxMessage->IDE == CAN_Id_Standard) + { + RxMessage->StdId = (uint32_t)0x000007FF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 21); + } + else + { + RxMessage->ExtId = (uint32_t)0x1FFFFFFF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 3); + } + + RxMessage->RTR = (uint8_t)0x02 & CANx->sFIFOMailBox[FIFONumber].RIR; + /* Get the DLC */ + RxMessage->DLC = (uint8_t)0x0F & CANx->sFIFOMailBox[FIFONumber].RDTR; + /* Get the FMI */ + RxMessage->FMI = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDTR >> 8); + /* Get the data field */ + RxMessage->Data[0] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDLR; + RxMessage->Data[1] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 8); + RxMessage->Data[2] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 16); + RxMessage->Data[3] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 24); + RxMessage->Data[4] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDHR; + RxMessage->Data[5] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 8); + RxMessage->Data[6] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 16); + RxMessage->Data[7] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 24); + /* Release the FIFO */ + /* Release FIFO0 */ + if (FIFONumber == CAN_FIFO0) + { + CANx->RF0R |= CAN_RF0R_RFOM0; + } + /* Release FIFO1 */ + else /* FIFONumber == CAN_FIFO1 */ + { + CANx->RF1R |= CAN_RF1R_RFOM1; + } +} + +/** + * @brief Releases the specified FIFO. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1. + * @retval None. + */ +void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + /* Release FIFO0 */ + if (FIFONumber == CAN_FIFO0) + { + CANx->RF0R |= CAN_RF0R_RFOM0; + } + /* Release FIFO1 */ + else /* FIFONumber == CAN_FIFO1 */ + { + CANx->RF1R |= CAN_RF1R_RFOM1; + } +} + +/** + * @brief Returns the number of pending messages. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. + * @retval NbMessage : which is the number of pending message. + */ +uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber) +{ + uint8_t message_pending=0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_FIFO(FIFONumber)); + if (FIFONumber == CAN_FIFO0) + { + message_pending = (uint8_t)(CANx->RF0R&(uint32_t)0x03); + } + else if (FIFONumber == CAN_FIFO1) + { + message_pending = (uint8_t)(CANx->RF1R&(uint32_t)0x03); + } + else + { + message_pending = 0; + } + return message_pending; +} + + +/** + * @brief Select the CAN Operation mode. + * @param CAN_OperatingMode : CAN Operating Mode. This parameter can be one + * of @ref CAN_OperatingMode_TypeDef enumeration. + * @retval status of the requested mode which can be + * - CAN_ModeStatus_Failed CAN failed entering the specific mode + * - CAN_ModeStatus_Success CAN Succeed entering the specific mode + + */ +uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode) +{ + uint8_t status = CAN_ModeStatus_Failed; + + /* Timeout for INAK or also for SLAK bits*/ + uint32_t timeout = INAK_TIMEOUT; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_OPERATING_MODE(CAN_OperatingMode)); + + if (CAN_OperatingMode == CAN_OperatingMode_Initialization) + { + /* Request initialisation */ + CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_SLEEP)) | CAN_MCR_INRQ); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) && (timeout != 0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else if (CAN_OperatingMode == CAN_OperatingMode_Normal) + { + /* Request leave initialisation and sleep mode and enter Normal mode */ + CANx->MCR &= (uint32_t)(~(CAN_MCR_SLEEP|CAN_MCR_INRQ)); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != 0) && (timeout!=0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != 0) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else if (CAN_OperatingMode == CAN_OperatingMode_Sleep) + { + /* Request Sleep mode */ + CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); + + /* Wait the acknowledge */ + while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) && (timeout!=0)) + { + timeout--; + } + if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) + { + status = CAN_ModeStatus_Failed; + } + else + { + status = CAN_ModeStatus_Success; + } + } + else + { + status = CAN_ModeStatus_Failed; + } + + return (uint8_t) status; +} + +/** + * @brief Enters the low power mode. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval status: CAN_Sleep_Ok if sleep entered, CAN_Sleep_Failed in an + * other case. + */ +uint8_t CAN_Sleep(CAN_TypeDef* CANx) +{ + uint8_t sleepstatus = CAN_Sleep_Failed; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Request Sleep mode */ + CANx->MCR = (((CANx->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); + + /* Sleep mode status */ + if ((CANx->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) == CAN_MSR_SLAK) + { + /* Sleep mode not entered */ + sleepstatus = CAN_Sleep_Ok; + } + /* return sleep mode status */ + return (uint8_t)sleepstatus; +} + +/** + * @brief Wakes the CAN up. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval status: CAN_WakeUp_Ok if sleep mode left, CAN_WakeUp_Failed in an + * other case. + */ +uint8_t CAN_WakeUp(CAN_TypeDef* CANx) +{ + uint32_t wait_slak = SLAK_TIMEOUT; + uint8_t wakeupstatus = CAN_WakeUp_Failed; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Wake up request */ + CANx->MCR &= ~(uint32_t)CAN_MCR_SLEEP; + + /* Sleep mode status */ + while(((CANx->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)&&(wait_slak!=0x00)) + { + wait_slak--; + } + if((CANx->MSR & CAN_MSR_SLAK) != CAN_MSR_SLAK) + { + /* wake up done : Sleep mode exited */ + wakeupstatus = CAN_WakeUp_Ok; + } + /* return wakeup status */ + return (uint8_t)wakeupstatus; +} + + +/** + * @brief Returns the CANx's last error code (LEC). + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval CAN_ErrorCode: specifies the Error code : + * - CAN_ERRORCODE_NoErr No Error + * - CAN_ERRORCODE_StuffErr Stuff Error + * - CAN_ERRORCODE_FormErr Form Error + * - CAN_ERRORCODE_ACKErr Acknowledgment Error + * - CAN_ERRORCODE_BitRecessiveErr Bit Recessive Error + * - CAN_ERRORCODE_BitDominantErr Bit Dominant Error + * - CAN_ERRORCODE_CRCErr CRC Error + * - CAN_ERRORCODE_SoftwareSetErr Software Set Error + */ + +uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx) +{ + uint8_t errorcode=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the error code*/ + errorcode = (((uint8_t)CANx->ESR) & (uint8_t)CAN_ESR_LEC); + + /* Return the error code*/ + return errorcode; +} +/** + * @brief Returns the CANx Receive Error Counter (REC). + * @note In case of an error during reception, this counter is incremented + * by 1 or by 8 depending on the error condition as defined by the CAN + * standard. After every successful reception, the counter is + * decremented by 1 or reset to 120 if its value was higher than 128. + * When the counter value exceeds 127, the CAN controller enters the + * error passive state. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval CAN Receive Error Counter. + */ +uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx) +{ + uint8_t counter=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the Receive Error Counter*/ + counter = (uint8_t)((CANx->ESR & CAN_ESR_REC)>> 24); + + /* Return the Receive Error Counter*/ + return counter; +} + + +/** + * @brief Returns the LSB of the 9-bit CANx Transmit Error Counter(TEC). + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @retval LSB of the 9-bit CAN Transmit Error Counter. + */ +uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx) +{ + uint8_t counter=0; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + + /* Get the LSB of the 9-bit CANx Transmit Error Counter(TEC) */ + counter = (uint8_t)((CANx->ESR & CAN_ESR_TEC)>> 16); + + /* Return the LSB of the 9-bit CANx Transmit Error Counter(TEC) */ + return counter; +} + + +/** + * @brief Enables or disables the specified CANx interrupts. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the CAN interrupt sources to be enabled or disabled. + * This parameter can be: + * - CAN_IT_TME, + * - CAN_IT_FMP0, + * - CAN_IT_FF0, + * - CAN_IT_FOV0, + * - CAN_IT_FMP1, + * - CAN_IT_FF1, + * - CAN_IT_FOV1, + * - CAN_IT_EWG, + * - CAN_IT_EPV, + * - CAN_IT_LEC, + * - CAN_IT_ERR, + * - CAN_IT_WKU or + * - CAN_IT_SLK. + * @param NewState: new state of the CAN interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IT(CAN_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected CANx interrupt */ + CANx->IER |= CAN_IT; + } + else + { + /* Disable the selected CANx interrupt */ + CANx->IER &= ~CAN_IT; + } +} +/** + * @brief Checks whether the specified CAN flag is set or not. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_FLAG: specifies the flag to check. + * This parameter can be one of the following flags: + * - CAN_FLAG_EWG + * - CAN_FLAG_EPV + * - CAN_FLAG_BOF + * - CAN_FLAG_RQCP0 + * - CAN_FLAG_RQCP1 + * - CAN_FLAG_RQCP2 + * - CAN_FLAG_FMP1 + * - CAN_FLAG_FF1 + * - CAN_FLAG_FOV1 + * - CAN_FLAG_FMP0 + * - CAN_FLAG_FF0 + * - CAN_FLAG_FOV0 + * - CAN_FLAG_WKU + * - CAN_FLAG_SLAK + * - CAN_FLAG_LEC + * @retval The new state of CAN_FLAG (SET or RESET). + */ +FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_GET_FLAG(CAN_FLAG)); + + + if((CAN_FLAG & CAN_FLAGS_ESR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->ESR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_MSR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->MSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_TSR) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->TSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else if((CAN_FLAG & CAN_FLAGS_RF0R) != (uint32_t)RESET) + { + /* Check the status of the specified CAN flag */ + if ((CANx->RF0R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + else /* If(CAN_FLAG & CAN_FLAGS_RF1R != (uint32_t)RESET) */ + { + /* Check the status of the specified CAN flag */ + if ((uint32_t)(CANx->RF1R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET) + { + /* CAN_FLAG is set */ + bitstatus = SET; + } + else + { + /* CAN_FLAG is reset */ + bitstatus = RESET; + } + } + /* Return the CAN_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the CAN's pending flags. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_FLAG: specifies the flag to clear. + * This parameter can be one of the following flags: + * - CAN_FLAG_RQCP0 + * - CAN_FLAG_RQCP1 + * - CAN_FLAG_RQCP2 + * - CAN_FLAG_FF1 + * - CAN_FLAG_FOV1 + * - CAN_FLAG_FF0 + * - CAN_FLAG_FOV0 + * - CAN_FLAG_WKU + * - CAN_FLAG_SLAK + * - CAN_FLAG_LEC + * @retval None. + */ +void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG) +{ + uint32_t flagtmp=0; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_CLEAR_FLAG(CAN_FLAG)); + + if (CAN_FLAG == CAN_FLAG_LEC) /* ESR register */ + { + /* Clear the selected CAN flags */ + CANx->ESR = (uint32_t)RESET; + } + else /* MSR or TSR or RF0R or RF1R */ + { + flagtmp = CAN_FLAG & 0x000FFFFF; + + if ((CAN_FLAG & CAN_FLAGS_RF0R)!=(uint32_t)RESET) + { + /* Receive Flags */ + CANx->RF0R = (uint32_t)(flagtmp); + } + else if ((CAN_FLAG & CAN_FLAGS_RF1R)!=(uint32_t)RESET) + { + /* Receive Flags */ + CANx->RF1R = (uint32_t)(flagtmp); + } + else if ((CAN_FLAG & CAN_FLAGS_TSR)!=(uint32_t)RESET) + { + /* Transmit Flags */ + CANx->TSR = (uint32_t)(flagtmp); + } + else /* If((CAN_FLAG & CAN_FLAGS_MSR)!=(uint32_t)RESET) */ + { + /* Operating mode Flags */ + CANx->MSR = (uint32_t)(flagtmp); + } + } +} + +/** + * @brief Checks whether the specified CANx interrupt has occurred or not. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the CAN interrupt source to check. + * This parameter can be one of the following flags: + * - CAN_IT_TME + * - CAN_IT_FMP0 + * - CAN_IT_FF0 + * - CAN_IT_FOV0 + * - CAN_IT_FMP1 + * - CAN_IT_FF1 + * - CAN_IT_FOV1 + * - CAN_IT_WKU + * - CAN_IT_SLK + * - CAN_IT_EWG + * - CAN_IT_EPV + * - CAN_IT_BOF + * - CAN_IT_LEC + * - CAN_IT_ERR + * @retval The current state of CAN_IT (SET or RESET). + */ +ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT) +{ + ITStatus itstatus = RESET; + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_IT(CAN_IT)); + + /* check the enable interrupt bit */ + if((CANx->IER & CAN_IT) != RESET) + { + /* in case the Interrupt is enabled, .... */ + switch (CAN_IT) + { + case CAN_IT_TME: + /* Check CAN_TSR_RQCPx bits */ + itstatus = CheckITStatus(CANx->TSR, CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2); + break; + case CAN_IT_FMP0: + /* Check CAN_RF0R_FMP0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FMP0); + break; + case CAN_IT_FF0: + /* Check CAN_RF0R_FULL0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FULL0); + break; + case CAN_IT_FOV0: + /* Check CAN_RF0R_FOVR0 bit */ + itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FOVR0); + break; + case CAN_IT_FMP1: + /* Check CAN_RF1R_FMP1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FMP1); + break; + case CAN_IT_FF1: + /* Check CAN_RF1R_FULL1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FULL1); + break; + case CAN_IT_FOV1: + /* Check CAN_RF1R_FOVR1 bit */ + itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FOVR1); + break; + case CAN_IT_WKU: + /* Check CAN_MSR_WKUI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_WKUI); + break; + case CAN_IT_SLK: + /* Check CAN_MSR_SLAKI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_SLAKI); + break; + case CAN_IT_EWG: + /* Check CAN_ESR_EWGF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EWGF); + break; + case CAN_IT_EPV: + /* Check CAN_ESR_EPVF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EPVF); + break; + case CAN_IT_BOF: + /* Check CAN_ESR_BOFF bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_BOFF); + break; + case CAN_IT_LEC: + /* Check CAN_ESR_LEC bit */ + itstatus = CheckITStatus(CANx->ESR, CAN_ESR_LEC); + break; + case CAN_IT_ERR: + /* Check CAN_MSR_ERRI bit */ + itstatus = CheckITStatus(CANx->MSR, CAN_MSR_ERRI); + break; + default : + /* in case of error, return RESET */ + itstatus = RESET; + break; + } + } + else + { + /* in case the Interrupt is not enabled, return RESET */ + itstatus = RESET; + } + + /* Return the CAN_IT status */ + return itstatus; +} + +/** + * @brief Clears the CANx's interrupt pending bits. + * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. + * @param CAN_IT: specifies the interrupt pending bit to clear. + * - CAN_IT_TME + * - CAN_IT_FF0 + * - CAN_IT_FOV0 + * - CAN_IT_FF1 + * - CAN_IT_FOV1 + * - CAN_IT_WKU + * - CAN_IT_SLK + * - CAN_IT_EWG + * - CAN_IT_EPV + * - CAN_IT_BOF + * - CAN_IT_LEC + * - CAN_IT_ERR + * @retval None. + */ +void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT) +{ + /* Check the parameters */ + assert_param(IS_CAN_ALL_PERIPH(CANx)); + assert_param(IS_CAN_CLEAR_IT(CAN_IT)); + + switch (CAN_IT) + { + case CAN_IT_TME: + /* Clear CAN_TSR_RQCPx (rc_w1)*/ + CANx->TSR = CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2; + break; + case CAN_IT_FF0: + /* Clear CAN_RF0R_FULL0 (rc_w1)*/ + CANx->RF0R = CAN_RF0R_FULL0; + break; + case CAN_IT_FOV0: + /* Clear CAN_RF0R_FOVR0 (rc_w1)*/ + CANx->RF0R = CAN_RF0R_FOVR0; + break; + case CAN_IT_FF1: + /* Clear CAN_RF1R_FULL1 (rc_w1)*/ + CANx->RF1R = CAN_RF1R_FULL1; + break; + case CAN_IT_FOV1: + /* Clear CAN_RF1R_FOVR1 (rc_w1)*/ + CANx->RF1R = CAN_RF1R_FOVR1; + break; + case CAN_IT_WKU: + /* Clear CAN_MSR_WKUI (rc_w1)*/ + CANx->MSR = CAN_MSR_WKUI; + break; + case CAN_IT_SLK: + /* Clear CAN_MSR_SLAKI (rc_w1)*/ + CANx->MSR = CAN_MSR_SLAKI; + break; + case CAN_IT_EWG: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* Note : the corresponding Flag is cleared by hardware depending + of the CAN Bus status*/ + break; + case CAN_IT_EPV: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* Note : the corresponding Flag is cleared by hardware depending + of the CAN Bus status*/ + break; + case CAN_IT_BOF: + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* Note : the corresponding Flag is cleared by hardware depending + of the CAN Bus status*/ + break; + case CAN_IT_LEC: + /* Clear LEC bits */ + CANx->ESR = RESET; + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + break; + case CAN_IT_ERR: + /*Clear LEC bits */ + CANx->ESR = RESET; + /* Clear CAN_MSR_ERRI (rc_w1) */ + CANx->MSR = CAN_MSR_ERRI; + /* Note : BOFF, EPVF and EWGF Flags are cleared by hardware depending + of the CAN Bus status*/ + break; + default : + break; + } +} + +/** + * @brief Checks whether the CAN interrupt has occurred or not. + * @param CAN_Reg: specifies the CAN interrupt register to check. + * @param It_Bit: specifies the interrupt source bit to check. + * @retval The new state of the CAN Interrupt (SET or RESET). + */ +static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit) +{ + ITStatus pendingbitstatus = RESET; + + if ((CAN_Reg & It_Bit) != (uint32_t)RESET) + { + /* CAN_IT is set */ + pendingbitstatus = SET; + } + else + { + /* CAN_IT is reset */ + pendingbitstatus = RESET; + } + return pendingbitstatus; +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_cec.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_cec.c new file mode 100644 index 0000000..4dc615f --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_cec.c @@ -0,0 +1,433 @@ +/** + ****************************************************************************** + * @file stm32f10x_cec.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the CEC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_cec.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup CEC + * @brief CEC driver modules + * @{ + */ + +/** @defgroup CEC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_Defines + * @{ + */ + +/* ------------ CEC registers bit address in the alias region ----------- */ +#define CEC_OFFSET (CEC_BASE - PERIPH_BASE) + +/* --- CFGR Register ---*/ + +/* Alias word address of PE bit */ +#define CFGR_OFFSET (CEC_OFFSET + 0x00) +#define PE_BitNumber 0x00 +#define CFGR_PE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (PE_BitNumber * 4)) + +/* Alias word address of IE bit */ +#define IE_BitNumber 0x01 +#define CFGR_IE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (IE_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of TSOM bit */ +#define CSR_OFFSET (CEC_OFFSET + 0x10) +#define TSOM_BitNumber 0x00 +#define CSR_TSOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TSOM_BitNumber * 4)) + +/* Alias word address of TEOM bit */ +#define TEOM_BitNumber 0x01 +#define CSR_TEOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEOM_BitNumber * 4)) + +#define CFGR_CLEAR_Mask (uint8_t)(0xF3) /* CFGR register Mask */ +#define FLAG_Mask ((uint32_t)0x00FFFFFF) /* CEC FLAG mask */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_Macros + * @{ + */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_Variables + * @{ + */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + + +/** @defgroup CEC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the CEC peripheral registers to their default reset + * values. + * @param None + * @retval None + */ +void CEC_DeInit(void) +{ + /* Enable CEC reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, ENABLE); + /* Release CEC from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, DISABLE); +} + + +/** + * @brief Initializes the CEC peripheral according to the specified + * parameters in the CEC_InitStruct. + * @param CEC_InitStruct: pointer to an CEC_InitTypeDef structure that + * contains the configuration information for the specified + * CEC peripheral. + * @retval None + */ +void CEC_Init(CEC_InitTypeDef* CEC_InitStruct) +{ + uint16_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_CEC_BIT_TIMING_ERROR_MODE(CEC_InitStruct->CEC_BitTimingMode)); + assert_param(IS_CEC_BIT_PERIOD_ERROR_MODE(CEC_InitStruct->CEC_BitPeriodMode)); + + /*---------------------------- CEC CFGR Configuration -----------------*/ + /* Get the CEC CFGR value */ + tmpreg = CEC->CFGR; + + /* Clear BTEM and BPEM bits */ + tmpreg &= CFGR_CLEAR_Mask; + + /* Configure CEC: Bit Timing Error and Bit Period Error */ + tmpreg |= (uint16_t)(CEC_InitStruct->CEC_BitTimingMode | CEC_InitStruct->CEC_BitPeriodMode); + + /* Write to CEC CFGR register*/ + CEC->CFGR = tmpreg; + +} + +/** + * @brief Enables or disables the specified CEC peripheral. + * @param NewState: new state of the CEC peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CEC_Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CFGR_PE_BB = (uint32_t)NewState; + + if(NewState == DISABLE) + { + /* Wait until the PE bit is cleared by hardware (Idle Line detected) */ + while((CEC->CFGR & CEC_CFGR_PE) != (uint32_t)RESET) + { + } + } +} + +/** + * @brief Enables or disables the CEC interrupt. + * @param NewState: new state of the CEC interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CEC_ITConfig(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CFGR_IE_BB = (uint32_t)NewState; +} + +/** + * @brief Defines the Own Address of the CEC device. + * @param CEC_OwnAddress: The CEC own address + * @retval None + */ +void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress) +{ + /* Check the parameters */ + assert_param(IS_CEC_ADDRESS(CEC_OwnAddress)); + + /* Set the CEC own address */ + CEC->OAR = CEC_OwnAddress; +} + +/** + * @brief Sets the CEC prescaler value. + * @param CEC_Prescaler: CEC prescaler new value + * @retval None + */ +void CEC_SetPrescaler(uint16_t CEC_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_CEC_PRESCALER(CEC_Prescaler)); + + /* Set the Prescaler value*/ + CEC->PRES = CEC_Prescaler; +} + +/** + * @brief Transmits single data through the CEC peripheral. + * @param Data: the data to transmit. + * @retval None + */ +void CEC_SendDataByte(uint8_t Data) +{ + /* Transmit Data */ + CEC->TXD = Data ; +} + + +/** + * @brief Returns the most recent received data by the CEC peripheral. + * @param None + * @retval The received data. + */ +uint8_t CEC_ReceiveDataByte(void) +{ + /* Receive Data */ + return (uint8_t)(CEC->RXD); +} + +/** + * @brief Starts a new message. + * @param None + * @retval None + */ +void CEC_StartOfMessage(void) +{ + /* Starts of new message */ + *(__IO uint32_t *) CSR_TSOM_BB = (uint32_t)0x1; +} + +/** + * @brief Transmits message with or without an EOM bit. + * @param NewState: new state of the CEC Tx End Of Message. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void CEC_EndOfMessageCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + /* The data byte will be transmitted with or without an EOM bit*/ + *(__IO uint32_t *) CSR_TEOM_BB = (uint32_t)NewState; +} + +/** + * @brief Gets the CEC flag status + * @param CEC_FLAG: specifies the CEC flag to check. + * This parameter can be one of the following values: + * @arg CEC_FLAG_BTE: Bit Timing Error + * @arg CEC_FLAG_BPE: Bit Period Error + * @arg CEC_FLAG_RBTFE: Rx Block Transfer Finished Error + * @arg CEC_FLAG_SBE: Start Bit Error + * @arg CEC_FLAG_ACKE: Block Acknowledge Error + * @arg CEC_FLAG_LINE: Line Error + * @arg CEC_FLAG_TBTFE: Tx Block Transfer Finished Error + * @arg CEC_FLAG_TEOM: Tx End Of Message + * @arg CEC_FLAG_TERR: Tx Error + * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished + * @arg CEC_FLAG_RSOM: Rx Start Of Message + * @arg CEC_FLAG_REOM: Rx End Of Message + * @arg CEC_FLAG_RERR: Rx Error + * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished + * @retval The new state of CEC_FLAG (SET or RESET) + */ +FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t cecreg = 0, cecbase = 0; + + /* Check the parameters */ + assert_param(IS_CEC_GET_FLAG(CEC_FLAG)); + + /* Get the CEC peripheral base address */ + cecbase = (uint32_t)(CEC_BASE); + + /* Read flag register index */ + cecreg = CEC_FLAG >> 28; + + /* Get bit[23:0] of the flag */ + CEC_FLAG &= FLAG_Mask; + + if(cecreg != 0) + { + /* Flag in CEC ESR Register */ + CEC_FLAG = (uint32_t)(CEC_FLAG >> 16); + + /* Get the CEC ESR register address */ + cecbase += 0xC; + } + else + { + /* Get the CEC CSR register address */ + cecbase += 0x10; + } + + if(((*(__IO uint32_t *)cecbase) & CEC_FLAG) != (uint32_t)RESET) + { + /* CEC_FLAG is set */ + bitstatus = SET; + } + else + { + /* CEC_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the CEC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the CEC's pending flags. + * @param CEC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg CEC_FLAG_TERR: Tx Error + * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished + * @arg CEC_FLAG_RSOM: Rx Start Of Message + * @arg CEC_FLAG_REOM: Rx End Of Message + * @arg CEC_FLAG_RERR: Rx Error + * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished + * @retval None + */ +void CEC_ClearFlag(uint32_t CEC_FLAG) +{ + uint32_t tmp = 0x0; + + /* Check the parameters */ + assert_param(IS_CEC_CLEAR_FLAG(CEC_FLAG)); + + tmp = CEC->CSR & 0x2; + + /* Clear the selected CEC flags */ + CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_FLAG) & 0xFFFFFFFC) | tmp); +} + +/** + * @brief Checks whether the specified CEC interrupt has occurred or not. + * @param CEC_IT: specifies the CEC interrupt source to check. + * This parameter can be one of the following values: + * @arg CEC_IT_TERR: Tx Error + * @arg CEC_IT_TBTF: Tx Block Transfer Finished + * @arg CEC_IT_RERR: Rx Error + * @arg CEC_IT_RBTF: Rx Block Transfer Finished + * @retval The new state of CEC_IT (SET or RESET). + */ +ITStatus CEC_GetITStatus(uint8_t CEC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_CEC_GET_IT(CEC_IT)); + + /* Get the CEC IT enable bit status */ + enablestatus = (CEC->CFGR & (uint8_t)CEC_CFGR_IE) ; + + /* Check the status of the specified CEC interrupt */ + if (((CEC->CSR & CEC_IT) != (uint32_t)RESET) && enablestatus) + { + /* CEC_IT is set */ + bitstatus = SET; + } + else + { + /* CEC_IT is reset */ + bitstatus = RESET; + } + /* Return the CEC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the CEC's interrupt pending bits. + * @param CEC_IT: specifies the CEC interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg CEC_IT_TERR: Tx Error + * @arg CEC_IT_TBTF: Tx Block Transfer Finished + * @arg CEC_IT_RERR: Rx Error + * @arg CEC_IT_RBTF: Rx Block Transfer Finished + * @retval None + */ +void CEC_ClearITPendingBit(uint16_t CEC_IT) +{ + uint32_t tmp = 0x0; + + /* Check the parameters */ + assert_param(IS_CEC_GET_IT(CEC_IT)); + + tmp = CEC->CSR & 0x2; + + /* Clear the selected CEC interrupt pending bits */ + CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_IT) & 0xFFFFFFFC) | tmp); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_crc.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_crc.c new file mode 100644 index 0000000..6501728 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_crc.c @@ -0,0 +1,160 @@ +/** + ****************************************************************************** + * @file stm32f10x_crc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the CRC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_crc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup CRC + * @brief CRC driver modules + * @{ + */ + +/** @defgroup CRC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_Defines + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup CRC_Private_Functions + * @{ + */ + +/** + * @brief Resets the CRC Data register (DR). + * @param None + * @retval None + */ +void CRC_ResetDR(void) +{ + /* Reset CRC generator */ + CRC->CR = CRC_CR_RESET; +} + +/** + * @brief Computes the 32-bit CRC of a given data word(32-bit). + * @param Data: data word(32-bit) to compute its CRC + * @retval 32-bit CRC + */ +uint32_t CRC_CalcCRC(uint32_t Data) +{ + CRC->DR = Data; + + return (CRC->DR); +} + +/** + * @brief Computes the 32-bit CRC of a given buffer of data word(32-bit). + * @param pBuffer: pointer to the buffer containing the data to be computed + * @param BufferLength: length of the buffer to be computed + * @retval 32-bit CRC + */ +uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index = 0; + + for(index = 0; index < BufferLength; index++) + { + CRC->DR = pBuffer[index]; + } + return (CRC->DR); +} + +/** + * @brief Returns the current CRC value. + * @param None + * @retval 32-bit CRC + */ +uint32_t CRC_GetCRC(void) +{ + return (CRC->DR); +} + +/** + * @brief Stores a 8-bit data in the Independent Data(ID) register. + * @param IDValue: 8-bit value to be stored in the ID register + * @retval None + */ +void CRC_SetIDRegister(uint8_t IDValue) +{ + CRC->IDR = IDValue; +} + +/** + * @brief Returns the 8-bit data stored in the Independent Data(ID) register + * @param None + * @retval 8-bit value of the ID register + */ +uint8_t CRC_GetIDRegister(void) +{ + return (CRC->IDR); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_dac.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_dac.c new file mode 100644 index 0000000..1cfc71d --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_dac.c @@ -0,0 +1,571 @@ +/** + ****************************************************************************** + * @file stm32f10x_dac.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the DAC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_dac.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup DAC + * @brief DAC driver modules + * @{ + */ + +/** @defgroup DAC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Defines + * @{ + */ + +/* CR register Mask */ +#define CR_CLEAR_MASK ((uint32_t)0x00000FFE) + +/* DAC Dual Channels SWTRIG masks */ +#define DUAL_SWTRIG_SET ((uint32_t)0x00000003) +#define DUAL_SWTRIG_RESET ((uint32_t)0xFFFFFFFC) + +/* DHR registers offsets */ +#define DHR12R1_OFFSET ((uint32_t)0x00000008) +#define DHR12R2_OFFSET ((uint32_t)0x00000014) +#define DHR12RD_OFFSET ((uint32_t)0x00000020) + +/* DOR register offset */ +#define DOR_OFFSET ((uint32_t)0x0000002C) +/** + * @} + */ + +/** @defgroup DAC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the DAC peripheral registers to their default reset values. + * @param None + * @retval None + */ +void DAC_DeInit(void) +{ + /* Enable DAC reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE); + /* Release DAC from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE); +} + +/** + * @brief Initializes the DAC peripheral according to the specified + * parameters in the DAC_InitStruct. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that + * contains the configuration information for the specified DAC channel. + * @retval None + */ +void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct) +{ + uint32_t tmpreg1 = 0, tmpreg2 = 0; + /* Check the DAC parameters */ + assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger)); + assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude)); + assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer)); +/*---------------------------- DAC CR Configuration --------------------------*/ + /* Get the DAC CR value */ + tmpreg1 = DAC->CR; + /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ + tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel); + /* Configure for the selected DAC channel: buffer output, trigger, wave generation, + mask/amplitude for wave generation */ + /* Set TSELx and TENx bits according to DAC_Trigger value */ + /* Set WAVEx bits according to DAC_WaveGeneration value */ + /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ + /* Set BOFFx bit according to DAC_OutputBuffer value */ + tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration | + DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer); + /* Calculate CR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << DAC_Channel; + /* Write to DAC CR */ + DAC->CR = tmpreg1; +} + +/** + * @brief Fills each DAC_InitStruct member with its default value. + * @param DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct) +{ +/*--------------- Reset DAC init structure parameters values -----------------*/ + /* Initialize the DAC_Trigger member */ + DAC_InitStruct->DAC_Trigger = DAC_Trigger_None; + /* Initialize the DAC_WaveGeneration member */ + DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None; + /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */ + DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0; + /* Initialize the DAC_OutputBuffer member */ + DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable; +} + +/** + * @brief Enables or disables the specified DAC channel. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param NewState: new state of the DAC channel. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected DAC channel */ + DAC->CR |= (DAC_CR_EN1 << DAC_Channel); + } + else + { + /* Disable the selected DAC channel */ + DAC->CR &= ~(DAC_CR_EN1 << DAC_Channel); + } +} +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/** + * @brief Enables or disables the specified DAC interrupts. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_IT: specifies the DAC interrupt sources to be enabled or disabled. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @param NewState: new state of the specified DAC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_DAC_IT(DAC_IT)); + + if (NewState != DISABLE) + { + /* Enable the selected DAC interrupts */ + DAC->CR |= (DAC_IT << DAC_Channel); + } + else + { + /* Disable the selected DAC interrupts */ + DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel)); + } +} +#endif + +/** + * @brief Enables or disables the specified DAC channel DMA request. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param NewState: new state of the selected DAC channel DMA request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected DAC channel DMA request */ + DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel); + } + else + { + /* Disable the selected DAC channel DMA request */ + DAC->CR &= ~(DAC_CR_DMAEN1 << DAC_Channel); + } +} + +/** + * @brief Enables or disables the selected DAC channel software trigger. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param NewState: new state of the selected DAC channel software trigger. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable software trigger for the selected DAC channel */ + DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4); + } + else + { + /* Disable software trigger for the selected DAC channel */ + DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4)); + } +} + +/** + * @brief Enables or disables simultaneously the two DAC channels software + * triggers. + * @param NewState: new state of the DAC channels software triggers. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_DualSoftwareTriggerCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable software trigger for both DAC channels */ + DAC->SWTRIGR |= DUAL_SWTRIG_SET ; + } + else + { + /* Disable software trigger for both DAC channels */ + DAC->SWTRIGR &= DUAL_SWTRIG_RESET; + } +} + +/** + * @brief Enables or disables the selected DAC channel wave generation. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_Wave: Specifies the wave type to enable or disable. + * This parameter can be one of the following values: + * @arg DAC_Wave_Noise: noise wave generation + * @arg DAC_Wave_Triangle: triangle wave generation + * @param NewState: new state of the selected DAC channel wave generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_WAVE(DAC_Wave)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected wave generation for the selected DAC channel */ + DAC->CR |= DAC_Wave << DAC_Channel; + } + else + { + /* Disable the selected wave generation for the selected DAC channel */ + DAC->CR &= ~(DAC_Wave << DAC_Channel); + } +} + +/** + * @brief Set the specified data holding register value for DAC channel1. + * @param DAC_Align: Specifies the data alignment for DAC channel1. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data : Data to be loaded in the selected data holding register. + * @retval None + */ +void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12R1_OFFSET + DAC_Align; + + /* Set the DAC channel1 selected data holding register */ + *(__IO uint32_t *) tmp = Data; +} + +/** + * @brief Set the specified data holding register value for DAC channel2. + * @param DAC_Align: Specifies the data alignment for DAC channel2. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data : Data to be loaded in the selected data holding register. + * @retval None + */ +void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12R2_OFFSET + DAC_Align; + + /* Set the DAC channel2 selected data holding register */ + *(__IO uint32_t *)tmp = Data; +} + +/** + * @brief Set the specified data holding register value for dual channel + * DAC. + * @param DAC_Align: Specifies the data alignment for dual channel DAC. + * This parameter can be one of the following values: + * @arg DAC_Align_8b_R: 8bit right data alignment selected + * @arg DAC_Align_12b_L: 12bit left data alignment selected + * @arg DAC_Align_12b_R: 12bit right data alignment selected + * @param Data2: Data for DAC Channel2 to be loaded in the selected data + * holding register. + * @param Data1: Data for DAC Channel1 to be loaded in the selected data + * holding register. + * @retval None + */ +void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1) +{ + uint32_t data = 0, tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_ALIGN(DAC_Align)); + assert_param(IS_DAC_DATA(Data1)); + assert_param(IS_DAC_DATA(Data2)); + + /* Calculate and set dual DAC data holding register value */ + if (DAC_Align == DAC_Align_8b_R) + { + data = ((uint32_t)Data2 << 8) | Data1; + } + else + { + data = ((uint32_t)Data2 << 16) | Data1; + } + + tmp = (uint32_t)DAC_BASE; + tmp += DHR12RD_OFFSET + DAC_Align; + + /* Set the dual DAC selected data holding register */ + *(__IO uint32_t *)tmp = data; +} + +/** + * @brief Returns the last data output value of the selected DAC channel. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @retval The selected DAC channel data output value. + */ +uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + + tmp = (uint32_t) DAC_BASE ; + tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2); + + /* Returns the DAC channel data output register value */ + return (uint16_t) (*(__IO uint32_t*) tmp); +} + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) +/** + * @brief Checks whether the specified DAC flag is set or not. + * @param DAC_Channel: thee selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_FLAG: specifies the flag to check. + * This parameter can be only of the following value: + * @arg DAC_FLAG_DMAUDR: DMA underrun flag + * @retval The new state of DAC_FLAG (SET or RESET). + */ +FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_FLAG(DAC_FLAG)); + + /* Check the status of the specified DAC flag */ + if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET) + { + /* DAC_FLAG is set */ + bitstatus = SET; + } + else + { + /* DAC_FLAG is reset */ + bitstatus = RESET; + } + /* Return the DAC_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the DAC channelx's pending flags. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_FLAG: specifies the flag to clear. + * This parameter can be of the following value: + * @arg DAC_FLAG_DMAUDR: DMA underrun flag + * @retval None + */ +void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_FLAG(DAC_FLAG)); + + /* Clear the selected DAC flags */ + DAC->SR = (DAC_FLAG << DAC_Channel); +} + +/** + * @brief Checks whether the specified DAC interrupt has occurred or not. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_IT: specifies the DAC interrupt source to check. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @retval The new state of DAC_IT (SET or RESET). + */ +ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_IT(DAC_IT)); + + /* Get the DAC_IT enable bit status */ + enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ; + + /* Check the status of the specified DAC interrupt */ + if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus) + { + /* DAC_IT is set */ + bitstatus = SET; + } + else + { + /* DAC_IT is reset */ + bitstatus = RESET; + } + /* Return the DAC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the DAC channelx's interrupt pending bits. + * @param DAC_Channel: the selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_Channel_1: DAC Channel1 selected + * @arg DAC_Channel_2: DAC Channel2 selected + * @param DAC_IT: specifies the DAC interrupt pending bit to clear. + * This parameter can be the following values: + * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask + * @retval None + */ +void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT) +{ + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(DAC_Channel)); + assert_param(IS_DAC_IT(DAC_IT)); + + /* Clear the selected DAC interrupt pending bits */ + DAC->SR = (DAC_IT << DAC_Channel); +} +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_dbgmcu.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_dbgmcu.c new file mode 100644 index 0000000..96a8fde --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_dbgmcu.c @@ -0,0 +1,162 @@ +/** + ****************************************************************************** + * @file stm32f10x_dbgmcu.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the DBGMCU firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_dbgmcu.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup DBGMCU + * @brief DBGMCU driver modules + * @{ + */ + +/** @defgroup DBGMCU_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Private_Defines + * @{ + */ + +#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) +/** + * @} + */ + +/** @defgroup DBGMCU_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup DBGMCU_Private_Functions + * @{ + */ + +/** + * @brief Returns the device revision identifier. + * @param None + * @retval Device revision identifier + */ +uint32_t DBGMCU_GetREVID(void) +{ + return(DBGMCU->IDCODE >> 16); +} + +/** + * @brief Returns the device identifier. + * @param None + * @retval Device identifier + */ +uint32_t DBGMCU_GetDEVID(void) +{ + return(DBGMCU->IDCODE & IDCODE_DEVID_MASK); +} + +/** + * @brief Configures the specified peripheral and low power mode behavior + * when the MCU under Debug mode. + * @param DBGMCU_Periph: specifies the peripheral and low power mode. + * This parameter can be any combination of the following values: + * @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode + * @arg DBGMCU_STOP: Keep debugger connection during STOP mode + * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode + * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted + * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted + * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted + * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted + * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted + * @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted + * @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted + * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted + * @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted + * @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted + * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted + * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted + * @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted + * @arg DBGMCU_CAN2_STOP: Debug CAN2 stopped when Core is halted + * @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted + * @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted + * @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted + * @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted + * @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted + * @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted + * @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted + * @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted + * @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted + * @param NewState: new state of the specified peripheral in Debug mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + DBGMCU->CR |= DBGMCU_Periph; + } + else + { + DBGMCU->CR &= ~DBGMCU_Periph; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_dma.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_dma.c new file mode 100644 index 0000000..bf072df --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_dma.c @@ -0,0 +1,714 @@ +/** + ****************************************************************************** + * @file stm32f10x_dma.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the DMA firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_dma.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup DMA + * @brief DMA driver modules + * @{ + */ + +/** @defgroup DMA_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup DMA_Private_Defines + * @{ + */ + + +/* DMA1 Channelx interrupt pending bit masks */ +#define DMA1_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1)) +#define DMA1_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2)) +#define DMA1_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3)) +#define DMA1_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4)) +#define DMA1_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5)) +#define DMA1_Channel6_IT_Mask ((uint32_t)(DMA_ISR_GIF6 | DMA_ISR_TCIF6 | DMA_ISR_HTIF6 | DMA_ISR_TEIF6)) +#define DMA1_Channel7_IT_Mask ((uint32_t)(DMA_ISR_GIF7 | DMA_ISR_TCIF7 | DMA_ISR_HTIF7 | DMA_ISR_TEIF7)) + +/* DMA2 Channelx interrupt pending bit masks */ +#define DMA2_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1)) +#define DMA2_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2)) +#define DMA2_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3)) +#define DMA2_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4)) +#define DMA2_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5)) + +/* DMA2 FLAG mask */ +#define FLAG_Mask ((uint32_t)0x10000000) + +/* DMA registers Masks */ +#define CCR_CLEAR_Mask ((uint32_t)0xFFFF800F) + +/** + * @} + */ + +/** @defgroup DMA_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup DMA_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup DMA_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the DMAy Channelx registers to their default reset + * values. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @retval None + */ +void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + + /* Disable the selected DMAy Channelx */ + DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN); + + /* Reset DMAy Channelx control register */ + DMAy_Channelx->CCR = 0; + + /* Reset DMAy Channelx remaining bytes register */ + DMAy_Channelx->CNDTR = 0; + + /* Reset DMAy Channelx peripheral address register */ + DMAy_Channelx->CPAR = 0; + + /* Reset DMAy Channelx memory address register */ + DMAy_Channelx->CMAR = 0; + + if (DMAy_Channelx == DMA1_Channel1) + { + /* Reset interrupt pending bits for DMA1 Channel1 */ + DMA1->IFCR |= DMA1_Channel1_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel2) + { + /* Reset interrupt pending bits for DMA1 Channel2 */ + DMA1->IFCR |= DMA1_Channel2_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel3) + { + /* Reset interrupt pending bits for DMA1 Channel3 */ + DMA1->IFCR |= DMA1_Channel3_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel4) + { + /* Reset interrupt pending bits for DMA1 Channel4 */ + DMA1->IFCR |= DMA1_Channel4_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel5) + { + /* Reset interrupt pending bits for DMA1 Channel5 */ + DMA1->IFCR |= DMA1_Channel5_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel6) + { + /* Reset interrupt pending bits for DMA1 Channel6 */ + DMA1->IFCR |= DMA1_Channel6_IT_Mask; + } + else if (DMAy_Channelx == DMA1_Channel7) + { + /* Reset interrupt pending bits for DMA1 Channel7 */ + DMA1->IFCR |= DMA1_Channel7_IT_Mask; + } + else if (DMAy_Channelx == DMA2_Channel1) + { + /* Reset interrupt pending bits for DMA2 Channel1 */ + DMA2->IFCR |= DMA2_Channel1_IT_Mask; + } + else if (DMAy_Channelx == DMA2_Channel2) + { + /* Reset interrupt pending bits for DMA2 Channel2 */ + DMA2->IFCR |= DMA2_Channel2_IT_Mask; + } + else if (DMAy_Channelx == DMA2_Channel3) + { + /* Reset interrupt pending bits for DMA2 Channel3 */ + DMA2->IFCR |= DMA2_Channel3_IT_Mask; + } + else if (DMAy_Channelx == DMA2_Channel4) + { + /* Reset interrupt pending bits for DMA2 Channel4 */ + DMA2->IFCR |= DMA2_Channel4_IT_Mask; + } + else + { + if (DMAy_Channelx == DMA2_Channel5) + { + /* Reset interrupt pending bits for DMA2 Channel5 */ + DMA2->IFCR |= DMA2_Channel5_IT_Mask; + } + } +} + +/** + * @brief Initializes the DMAy Channelx according to the specified + * parameters in the DMA_InitStruct. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that + * contains the configuration information for the specified DMA Channel. + * @retval None + */ +void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR)); + assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize)); + assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode)); + assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority)); + assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M)); + +/*--------------------------- DMAy Channelx CCR Configuration -----------------*/ + /* Get the DMAy_Channelx CCR value */ + tmpreg = DMAy_Channelx->CCR; + /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */ + tmpreg &= CCR_CLEAR_Mask; + /* Configure DMAy Channelx: data transfer, data size, priority level and mode */ + /* Set DIR bit according to DMA_DIR value */ + /* Set CIRC bit according to DMA_Mode value */ + /* Set PINC bit according to DMA_PeripheralInc value */ + /* Set MINC bit according to DMA_MemoryInc value */ + /* Set PSIZE bits according to DMA_PeripheralDataSize value */ + /* Set MSIZE bits according to DMA_MemoryDataSize value */ + /* Set PL bits according to DMA_Priority value */ + /* Set the MEM2MEM bit according to DMA_M2M value */ + tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode | + DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc | + DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize | + DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M; + + /* Write to DMAy Channelx CCR */ + DMAy_Channelx->CCR = tmpreg; + +/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/ + /* Write to DMAy Channelx CNDTR */ + DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize; + +/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/ + /* Write to DMAy Channelx CPAR */ + DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr; + +/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/ + /* Write to DMAy Channelx CMAR */ + DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr; +} + +/** + * @brief Fills each DMA_InitStruct member with its default value. + * @param DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct) +{ +/*-------------- Reset DMA init structure parameters values ------------------*/ + /* Initialize the DMA_PeripheralBaseAddr member */ + DMA_InitStruct->DMA_PeripheralBaseAddr = 0; + /* Initialize the DMA_MemoryBaseAddr member */ + DMA_InitStruct->DMA_MemoryBaseAddr = 0; + /* Initialize the DMA_DIR member */ + DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC; + /* Initialize the DMA_BufferSize member */ + DMA_InitStruct->DMA_BufferSize = 0; + /* Initialize the DMA_PeripheralInc member */ + DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable; + /* Initialize the DMA_MemoryInc member */ + DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable; + /* Initialize the DMA_PeripheralDataSize member */ + DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; + /* Initialize the DMA_MemoryDataSize member */ + DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; + /* Initialize the DMA_Mode member */ + DMA_InitStruct->DMA_Mode = DMA_Mode_Normal; + /* Initialize the DMA_Priority member */ + DMA_InitStruct->DMA_Priority = DMA_Priority_Low; + /* Initialize the DMA_M2M member */ + DMA_InitStruct->DMA_M2M = DMA_M2M_Disable; +} + +/** + * @brief Enables or disables the specified DMAy Channelx. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @param NewState: new state of the DMAy Channelx. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected DMAy Channelx */ + DMAy_Channelx->CCR |= DMA_CCR1_EN; + } + else + { + /* Disable the selected DMAy Channelx */ + DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN); + } +} + +/** + * @brief Enables or disables the specified DMAy Channelx interrupts. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @param DMA_IT: specifies the DMA interrupts sources to be enabled + * or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @param NewState: new state of the specified DMA interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + assert_param(IS_DMA_CONFIG_IT(DMA_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected DMA interrupts */ + DMAy_Channelx->CCR |= DMA_IT; + } + else + { + /* Disable the selected DMA interrupts */ + DMAy_Channelx->CCR &= ~DMA_IT; + } +} + +/** + * @brief Sets the number of data units in the current DMAy Channelx transfer. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @param DataNumber: The number of data units in the current DMAy Channelx + * transfer. + * @note This function can only be used when the DMAy_Channelx is disabled. + * @retval None. + */ +void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + +/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/ + /* Write to DMAy Channelx CNDTR */ + DMAy_Channelx->CNDTR = DataNumber; +} + +/** + * @brief Returns the number of remaining data units in the current + * DMAy Channelx transfer. + * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and + * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. + * @retval The number of remaining data units in the current DMAy Channelx + * transfer. + */ +uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx) +{ + /* Check the parameters */ + assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); + /* Return the number of remaining data units for DMAy Channelx */ + return ((uint16_t)(DMAy_Channelx->CNDTR)); +} + +/** + * @brief Checks whether the specified DMAy Channelx flag is set or not. + * @param DMAy_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag. + * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. + * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. + * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. + * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag. + * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. + * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. + * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. + * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag. + * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. + * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. + * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. + * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag. + * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. + * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. + * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. + * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag. + * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. + * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. + * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. + * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag. + * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. + * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. + * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. + * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag. + * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. + * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. + * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. + * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag. + * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. + * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. + * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. + * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag. + * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. + * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. + * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. + * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag. + * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. + * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. + * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. + * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag. + * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. + * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. + * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. + * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag. + * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. + * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. + * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. + * @retval The new state of DMAy_FLAG (SET or RESET). + */ +FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_GET_FLAG(DMAy_FLAG)); + + /* Calculate the used DMAy */ + if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET) + { + /* Get DMA2 ISR register value */ + tmpreg = DMA2->ISR ; + } + else + { + /* Get DMA1 ISR register value */ + tmpreg = DMA1->ISR ; + } + + /* Check the status of the specified DMAy flag */ + if ((tmpreg & DMAy_FLAG) != (uint32_t)RESET) + { + /* DMAy_FLAG is set */ + bitstatus = SET; + } + else + { + /* DMAy_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the DMAy_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the DMAy Channelx's pending flags. + * @param DMAy_FLAG: specifies the flag to clear. + * This parameter can be any combination (for the same DMA) of the following values: + * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag. + * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. + * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. + * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. + * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag. + * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. + * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. + * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. + * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag. + * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. + * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. + * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. + * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag. + * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. + * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. + * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. + * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag. + * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. + * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. + * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. + * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag. + * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. + * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. + * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. + * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag. + * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. + * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. + * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. + * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag. + * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. + * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. + * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. + * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag. + * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. + * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. + * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. + * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag. + * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. + * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. + * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. + * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag. + * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. + * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. + * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. + * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag. + * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. + * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. + * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. + * @retval None + */ +void DMA_ClearFlag(uint32_t DMAy_FLAG) +{ + /* Check the parameters */ + assert_param(IS_DMA_CLEAR_FLAG(DMAy_FLAG)); + + /* Calculate the used DMAy */ + if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET) + { + /* Clear the selected DMAy flags */ + DMA2->IFCR = DMAy_FLAG; + } + else + { + /* Clear the selected DMAy flags */ + DMA1->IFCR = DMAy_FLAG; + } +} + +/** + * @brief Checks whether the specified DMAy Channelx interrupt has occurred or not. + * @param DMAy_IT: specifies the DMAy interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt. + * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. + * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. + * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. + * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt. + * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. + * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. + * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. + * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt. + * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. + * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. + * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. + * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt. + * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. + * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. + * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. + * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt. + * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. + * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. + * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. + * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt. + * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. + * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. + * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. + * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt. + * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. + * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. + * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. + * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt. + * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. + * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. + * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. + * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt. + * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. + * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. + * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. + * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt. + * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. + * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. + * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. + * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt. + * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. + * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. + * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. + * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt. + * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. + * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. + * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. + * @retval The new state of DMAy_IT (SET or RESET). + */ +ITStatus DMA_GetITStatus(uint32_t DMAy_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_DMA_GET_IT(DMAy_IT)); + + /* Calculate the used DMA */ + if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET) + { + /* Get DMA2 ISR register value */ + tmpreg = DMA2->ISR; + } + else + { + /* Get DMA1 ISR register value */ + tmpreg = DMA1->ISR; + } + + /* Check the status of the specified DMAy interrupt */ + if ((tmpreg & DMAy_IT) != (uint32_t)RESET) + { + /* DMAy_IT is set */ + bitstatus = SET; + } + else + { + /* DMAy_IT is reset */ + bitstatus = RESET; + } + /* Return the DMA_IT status */ + return bitstatus; +} + +/** + * @brief Clears the DMAy Channelx's interrupt pending bits. + * @param DMAy_IT: specifies the DMAy interrupt pending bit to clear. + * This parameter can be any combination (for the same DMA) of the following values: + * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt. + * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. + * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. + * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. + * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt. + * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. + * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. + * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. + * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt. + * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. + * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. + * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. + * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt. + * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. + * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. + * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. + * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt. + * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. + * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. + * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. + * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt. + * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. + * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. + * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. + * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt. + * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. + * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. + * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. + * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt. + * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. + * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. + * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. + * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt. + * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. + * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. + * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. + * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt. + * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. + * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. + * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. + * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt. + * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. + * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. + * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. + * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt. + * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. + * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. + * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. + * @retval None + */ +void DMA_ClearITPendingBit(uint32_t DMAy_IT) +{ + /* Check the parameters */ + assert_param(IS_DMA_CLEAR_IT(DMAy_IT)); + + /* Calculate the used DMAy */ + if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET) + { + /* Clear the selected DMAy interrupt pending bits */ + DMA2->IFCR = DMAy_IT; + } + else + { + /* Clear the selected DMAy interrupt pending bits */ + DMA1->IFCR = DMAy_IT; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_exti.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_exti.c new file mode 100644 index 0000000..b6290d5 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_exti.c @@ -0,0 +1,269 @@ +/** + ****************************************************************************** + * @file stm32f10x_exti.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the EXTI firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_exti.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup EXTI + * @brief EXTI driver modules + * @{ + */ + +/** @defgroup EXTI_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_Defines + * @{ + */ + +#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup EXTI_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the EXTI peripheral registers to their default reset values. + * @param None + * @retval None + */ +void EXTI_DeInit(void) +{ + EXTI->IMR = 0x00000000; + EXTI->EMR = 0x00000000; + EXTI->RTSR = 0x00000000; + EXTI->FTSR = 0x00000000; + EXTI->PR = 0x000FFFFF; +} + +/** + * @brief Initializes the EXTI peripheral according to the specified + * parameters in the EXTI_InitStruct. + * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure + * that contains the configuration information for the EXTI peripheral. + * @retval None + */ +void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct) +{ + uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode)); + assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger)); + assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line)); + assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd)); + + tmp = (uint32_t)EXTI_BASE; + + if (EXTI_InitStruct->EXTI_LineCmd != DISABLE) + { + /* Clear EXTI line configuration */ + EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line; + EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line; + + tmp += EXTI_InitStruct->EXTI_Mode; + + *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; + + /* Clear Rising Falling edge configuration */ + EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line; + EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line; + + /* Select the trigger for the selected external interrupts */ + if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) + { + /* Rising Falling edge */ + EXTI->RTSR |= EXTI_InitStruct->EXTI_Line; + EXTI->FTSR |= EXTI_InitStruct->EXTI_Line; + } + else + { + tmp = (uint32_t)EXTI_BASE; + tmp += EXTI_InitStruct->EXTI_Trigger; + + *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; + } + } + else + { + tmp += EXTI_InitStruct->EXTI_Mode; + + /* Disable the selected external lines */ + *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line; + } +} + +/** + * @brief Fills each EXTI_InitStruct member with its reset value. + * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct) +{ + EXTI_InitStruct->EXTI_Line = EXTI_LINENONE; + EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt; + EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling; + EXTI_InitStruct->EXTI_LineCmd = DISABLE; +} + +/** + * @brief Generates a Software interrupt. + * @param EXTI_Line: specifies the EXTI lines to be enabled or disabled. + * This parameter can be any combination of EXTI_Linex where x can be (0..19). + * @retval None + */ +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->SWIER |= EXTI_Line; +} + +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param EXTI_Line: specifies the EXTI line flag to check. + * This parameter can be: + * @arg EXTI_Linex: External interrupt line x where x(0..19) + * @retval The new state of EXTI_Line (SET or RESET). + */ +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_GET_EXTI_LINE(EXTI_Line)); + + if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the EXTI's line pending flags. + * @param EXTI_Line: specifies the EXTI lines flags to clear. + * This parameter can be any combination of EXTI_Linex where x can be (0..19). + * @retval None + */ +void EXTI_ClearFlag(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->PR = EXTI_Line; +} + +/** + * @brief Checks whether the specified EXTI line is asserted or not. + * @param EXTI_Line: specifies the EXTI line to check. + * This parameter can be: + * @arg EXTI_Linex: External interrupt line x where x(0..19) + * @retval The new state of EXTI_Line (SET or RESET). + */ +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + /* Check the parameters */ + assert_param(IS_GET_EXTI_LINE(EXTI_Line)); + + enablestatus = EXTI->IMR & EXTI_Line; + if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the EXTI's line pending bits. + * @param EXTI_Line: specifies the EXTI lines to clear. + * This parameter can be any combination of EXTI_Linex where x can be (0..19). + * @retval None + */ +void EXTI_ClearITPendingBit(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(EXTI_Line)); + + EXTI->PR = EXTI_Line; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_flash.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_flash.c new file mode 100644 index 0000000..cdff9e9 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_flash.c @@ -0,0 +1,1684 @@ +/** + ****************************************************************************** + * @file stm32f10x_flash.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the FLASH firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_flash.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup FLASH + * @brief FLASH driver modules + * @{ + */ + +/** @defgroup FLASH_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_Defines + * @{ + */ + +/* Flash Access Control Register bits */ +#define ACR_LATENCY_Mask ((uint32_t)0x00000038) +#define ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7) +#define ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF) + +/* Flash Access Control Register bits */ +#define ACR_PRFTBS_Mask ((uint32_t)0x00000020) + +/* Flash Control Register bits */ +#define CR_PG_Set ((uint32_t)0x00000001) +#define CR_PG_Reset ((uint32_t)0x00001FFE) +#define CR_PER_Set ((uint32_t)0x00000002) +#define CR_PER_Reset ((uint32_t)0x00001FFD) +#define CR_MER_Set ((uint32_t)0x00000004) +#define CR_MER_Reset ((uint32_t)0x00001FFB) +#define CR_OPTPG_Set ((uint32_t)0x00000010) +#define CR_OPTPG_Reset ((uint32_t)0x00001FEF) +#define CR_OPTER_Set ((uint32_t)0x00000020) +#define CR_OPTER_Reset ((uint32_t)0x00001FDF) +#define CR_STRT_Set ((uint32_t)0x00000040) +#define CR_LOCK_Set ((uint32_t)0x00000080) + +/* FLASH Mask */ +#define RDPRT_Mask ((uint32_t)0x00000002) +#define WRP0_Mask ((uint32_t)0x000000FF) +#define WRP1_Mask ((uint32_t)0x0000FF00) +#define WRP2_Mask ((uint32_t)0x00FF0000) +#define WRP3_Mask ((uint32_t)0xFF000000) +#define OB_USER_BFB2 ((uint16_t)0x0008) + +/* FLASH Keys */ +#define RDP_Key ((uint16_t)0x00A5) +#define FLASH_KEY1 ((uint32_t)0x45670123) +#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) + +/* FLASH BANK address */ +#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF) + +/* Delay definition */ +#define EraseTimeout ((uint32_t)0x000B0000) +#define ProgramTimeout ((uint32_t)0x00002000) +/** + * @} + */ + +/** @defgroup FLASH_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup FLASH_Private_Functions + * @{ + */ + +/** +@code + + This driver provides functions to configure and program the Flash memory of all STM32F10x devices, + including the latest STM32F10x_XL density devices. + + STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability: + - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each) + - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each) + While other STM32F10x devices features only one bank with memory up to 512 Kbytes. + + In version V3.3.0, some functions were updated and new ones were added to support + STM32F10x_XL devices. Thus some functions manages all devices, while other are + dedicated for XL devices only. + + The table below presents the list of available functions depending on the used STM32F10x devices. + + *************************************************** + * Legacy functions used for all STM32F10x devices * + *************************************************** + +----------------------------------------------------------------------------------------------------------------------------------+ + | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | + | | devices | devices | | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_SetLatency | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_HalfCycleAccessCmd | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_PrefetchBufferCmd | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_Unlock | Yes | Yes | - For STM32F10X_XL devices: unlock Bank1 and Bank2. | + | | | | - For other devices: unlock Bank1 and it is equivalent | + | | | | to FLASH_UnlockBank1 function. | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_Lock | Yes | Yes | - For STM32F10X_XL devices: lock Bank1 and Bank2. | + | | | | - For other devices: lock Bank1 and it is equivalent | + | | | | to FLASH_LockBank1 function. | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ErasePage | Yes | Yes | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2 | + | | | | - For other devices: erase a page in Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_EraseAllPages | Yes | Yes | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 | + | | | | - For other devices: erase all pages in Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_EraseOptionBytes | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ProgramWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ProgramHalfWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ProgramOptionByteData | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_EnableWriteProtection | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ReadOutProtection | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_UserOptionByteConfig | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetUserOptionByte | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetWriteProtectionOptionByte | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetReadOutProtectionStatus | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetPrefetchBufferStatus | Yes | Yes | No change | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ITConfig | Yes | Yes | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts| + | | | | - For other devices: enable Bank1's interrupts | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetFlagStatus | Yes | Yes | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status| + | | | | - For other devices: return Bank1's flag status | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_ClearFlag | Yes | Yes | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag | + | | | | - For other devices: clear Bank1's flag | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_GetStatus | Yes | Yes | - Return the status of Bank1 (for all devices) | + | | | | equivalent to FLASH_GetBank1Status function | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_WaitForLastOperation | Yes | Yes | - Wait for Bank1 last operation (for all devices) | + | | | | equivalent to: FLASH_WaitForLastBank1Operation function | + +----------------------------------------------------------------------------------------------------------------------------------+ + + ************************************************************************************************************************ + * New functions used for all STM32F10x devices to manage Bank1: * + * - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 * + * - For other devices, these functions are optional (covered by functions listed above) * + ************************************************************************************************************************ + +----------------------------------------------------------------------------------------------------------------------------------+ + | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | + | | devices | devices | | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_UnlockBank1 | Yes | Yes | - Unlock Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_LockBank1 | Yes | Yes | - Lock Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_EraseAllBank1Pages | Yes | Yes | - Erase all pages in Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_GetBank1Status | Yes | Yes | - Return the status of Bank1 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_WaitForLastBank1Operation | Yes | Yes | - Wait for Bank1 last operation | + +----------------------------------------------------------------------------------------------------------------------------------+ + + ***************************************************************************** + * New Functions used only with STM32F10x_XL density devices to manage Bank2 * + ***************************************************************************** + +----------------------------------------------------------------------------------------------------------------------------------+ + | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments | + | | devices | devices | | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_UnlockBank2 | Yes | No | - Unlock Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + |FLASH_LockBank2 | Yes | No | - Lock Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_EraseAllBank2Pages | Yes | No | - Erase all pages in Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_GetBank2Status | Yes | No | - Return the status of Bank2 | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_WaitForLastBank2Operation | Yes | No | - Wait for Bank2 last operation | + |----------------------------------------------------------------------------------------------------------------------------------| + | FLASH_BootConfig | Yes | No | - Configure to boot from Bank1 or Bank2 | + +----------------------------------------------------------------------------------------------------------------------------------+ +@endcode +*/ + + +/** + * @brief Sets the code latency value. + * @note This function can be used for all STM32F10x devices. + * @param FLASH_Latency: specifies the FLASH Latency value. + * This parameter can be one of the following values: + * @arg FLASH_Latency_0: FLASH Zero Latency cycle + * @arg FLASH_Latency_1: FLASH One Latency cycle + * @arg FLASH_Latency_2: FLASH Two Latency cycles + * @retval None + */ +void FLASH_SetLatency(uint32_t FLASH_Latency) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_FLASH_LATENCY(FLASH_Latency)); + + /* Read the ACR register */ + tmpreg = FLASH->ACR; + + /* Sets the Latency value */ + tmpreg &= ACR_LATENCY_Mask; + tmpreg |= FLASH_Latency; + + /* Write the ACR register */ + FLASH->ACR = tmpreg; +} + +/** + * @brief Enables or disables the Half cycle flash access. + * @note This function can be used for all STM32F10x devices. + * @param FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode. + * This parameter can be one of the following values: + * @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable + * @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable + * @retval None + */ +void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess) +{ + /* Check the parameters */ + assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess)); + + /* Enable or disable the Half cycle access */ + FLASH->ACR &= ACR_HLFCYA_Mask; + FLASH->ACR |= FLASH_HalfCycleAccess; +} + +/** + * @brief Enables or disables the Prefetch Buffer. + * @note This function can be used for all STM32F10x devices. + * @param FLASH_PrefetchBuffer: specifies the Prefetch buffer status. + * This parameter can be one of the following values: + * @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable + * @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable + * @retval None + */ +void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer) +{ + /* Check the parameters */ + assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer)); + + /* Enable or disable the Prefetch Buffer */ + FLASH->ACR &= ACR_PRFTBE_Mask; + FLASH->ACR |= FLASH_PrefetchBuffer; +} + +/** + * @brief Unlocks the FLASH Program Erase Controller. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function unlocks Bank1 and Bank2. + * - For all other devices it unlocks Bank1 and it is equivalent + * to FLASH_UnlockBank1 function.. + * @param None + * @retval None + */ +void FLASH_Unlock(void) +{ + /* Authorize the FPEC of Bank1 Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; + +#ifdef STM32F10X_XL + /* Authorize the FPEC of Bank2 Access */ + FLASH->KEYR2 = FLASH_KEY1; + FLASH->KEYR2 = FLASH_KEY2; +#endif /* STM32F10X_XL */ +} +/** + * @brief Unlocks the FLASH Bank1 Program Erase Controller. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function unlocks Bank1. + * - For all other devices it unlocks Bank1 and it is + * equivalent to FLASH_Unlock function. + * @param None + * @retval None + */ +void FLASH_UnlockBank1(void) +{ + /* Authorize the FPEC of Bank1 Access */ + FLASH->KEYR = FLASH_KEY1; + FLASH->KEYR = FLASH_KEY2; +} + +#ifdef STM32F10X_XL +/** + * @brief Unlocks the FLASH Bank2 Program Erase Controller. + * @note This function can be used only for STM32F10X_XL density devices. + * @param None + * @retval None + */ +void FLASH_UnlockBank2(void) +{ + /* Authorize the FPEC of Bank2 Access */ + FLASH->KEYR2 = FLASH_KEY1; + FLASH->KEYR2 = FLASH_KEY2; + +} +#endif /* STM32F10X_XL */ + +/** + * @brief Locks the FLASH Program Erase Controller. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function Locks Bank1 and Bank2. + * - For all other devices it Locks Bank1 and it is equivalent + * to FLASH_LockBank1 function. + * @param None + * @retval None + */ +void FLASH_Lock(void) +{ + /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */ + FLASH->CR |= CR_LOCK_Set; + +#ifdef STM32F10X_XL + /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */ + FLASH->CR2 |= CR_LOCK_Set; +#endif /* STM32F10X_XL */ +} + +/** + * @brief Locks the FLASH Bank1 Program Erase Controller. + * @note this function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function Locks Bank1. + * - For all other devices it Locks Bank1 and it is equivalent + * to FLASH_Lock function. + * @param None + * @retval None + */ +void FLASH_LockBank1(void) +{ + /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */ + FLASH->CR |= CR_LOCK_Set; +} + +#ifdef STM32F10X_XL +/** + * @brief Locks the FLASH Bank2 Program Erase Controller. + * @note This function can be used only for STM32F10X_XL density devices. + * @param None + * @retval None + */ +void FLASH_LockBank2(void) +{ + /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */ + FLASH->CR2 |= CR_LOCK_Set; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Erases a specified FLASH page. + * @note This function can be used for all STM32F10x devices. + * @param Page_Address: The page address to be erased. + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ErasePage(uint32_t Page_Address) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Page_Address)); + +#ifdef STM32F10X_XL + if(Page_Address < FLASH_BANK1_END_ADDRESS) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR|= CR_PER_Set; + FLASH->AR = Page_Address; + FLASH->CR|= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + /* Disable the PER Bit */ + FLASH->CR &= CR_PER_Reset; + } + } + else + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR2|= CR_PER_Set; + FLASH->AR2 = Page_Address; + FLASH->CR2|= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + /* Disable the PER Bit */ + FLASH->CR2 &= CR_PER_Reset; + } + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase the page */ + FLASH->CR|= CR_PER_Set; + FLASH->AR = Page_Address; + FLASH->CR|= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + /* Disable the PER Bit */ + FLASH->CR &= CR_PER_Reset; + } +#endif /* STM32F10X_XL */ + + /* Return the Erase Status */ + return status; +} + +/** + * @brief Erases all FLASH pages. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllPages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + +#ifdef STM32F10X_XL + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= CR_MER_Set; + FLASH->CR |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR &= CR_MER_Reset; + } + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR2 |= CR_MER_Set; + FLASH->CR2 |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR2 &= CR_MER_Reset; + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= CR_MER_Set; + FLASH->CR |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR &= CR_MER_Reset; + } +#endif /* STM32F10X_XL */ + + /* Return the Erase Status */ + return status; +} + +/** + * @brief Erases all Bank1 FLASH pages. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices this function erases all Bank1 pages. + * - For all other devices it erases all Bank1 pages and it is equivalent + * to FLASH_EraseAllPages function. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllBank1Pages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR |= CR_MER_Set; + FLASH->CR |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR &= CR_MER_Reset; + } + /* Return the Erase Status */ + return status; +} + +#ifdef STM32F10X_XL +/** + * @brief Erases all Bank2 FLASH pages. + * @note This function can be used only for STM32F10x_XL density devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseAllBank2Pages(void) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to erase all pages */ + FLASH->CR2 |= CR_MER_Set; + FLASH->CR2 |= CR_STRT_Set; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(EraseTimeout); + + /* Disable the MER Bit */ + FLASH->CR2 &= CR_MER_Reset; + } + /* Return the Erase Status */ + return status; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Erases the FLASH option bytes. + * @note This functions erases all option bytes except the Read protection (RDP). + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EraseOptionBytes(void) +{ + uint16_t rdptmp = RDP_Key; + + FLASH_Status status = FLASH_COMPLETE; + + /* Get the actual read protection Option Byte value */ + if(FLASH_GetReadOutProtectionStatus() != RESET) + { + rdptmp = 0x00; + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + + /* if the previous operation is completed, proceed to erase the option bytes */ + FLASH->CR |= CR_OPTER_Set; + FLASH->CR |= CR_STRT_Set; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the erase operation is completed, disable the OPTER Bit */ + FLASH->CR &= CR_OPTER_Reset; + + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + /* Restore the last read protection Option Byte value */ + OB->RDP = (uint16_t)rdptmp; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + else + { + if (status != FLASH_TIMEOUT) + { + /* Disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + } + /* Return the erase status */ + return status; +} + +/** + * @brief Programs a word at a specified address. + * @note This function can be used for all STM32F10x devices. + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + +#ifdef STM32F10X_XL + if(Address < FLASH_BANK1_END_ADDRESS - 2) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + } + } + else if(Address == (FLASH_BANK1_END_ADDRESS - 1)) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + FLASH->CR2 |= CR_PG_Set; + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + } + else + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR2 |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + } + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new first + half word */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = (uint16_t)Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new second + half word */ + tmp = Address + 2; + + *(__IO uint16_t*) tmp = Data >> 16; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + else + { + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + } +#endif /* STM32F10X_XL */ + + /* Return the Program Status */ + return status; +} + +/** + * @brief Programs a half word at a specified address. + * @note This function can be used for all STM32F10x devices. + * @param Address: specifies the address to be programmed. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_FLASH_ADDRESS(Address)); + +#ifdef STM32F10X_XL + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(Address < FLASH_BANK1_END_ADDRESS) + { + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank1Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } + } + else + { + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR2 |= CR_PG_Set; + + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastBank2Operation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR2 &= CR_PG_Reset; + } + } +#else + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* if the previous operation is completed, proceed to program the new data */ + FLASH->CR |= CR_PG_Set; + + *(__IO uint16_t*)Address = Data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + /* Disable the PG Bit */ + FLASH->CR &= CR_PG_Reset; + } +#endif /* STM32F10X_XL */ + + /* Return the Program Status */ + return status; +} + +/** + * @brief Programs a half word at a specified Option Byte Data address. + * @note This function can be used for all STM32F10x devices. + * @param Address: specifies the address to be programmed. + * This parameter can be 0x1FFFF804 or 0x1FFFF806. + * @param Data: specifies the data to be programmed. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_OB_DATA_ADDRESS(Address)); + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + /* Enables the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + *(__IO uint16_t*)Address = Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the Option Byte Data Program Status */ + return status; +} + +/** + * @brief Write protects the desired pages + * @note This function can be used for all STM32F10x devices. + * @param FLASH_Pages: specifies the address of the pages to be write protected. + * This parameter can be: + * @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31 + * @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3 + * and FLASH_WRProt_Pages124to127 + * @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and + * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255 + * @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and + * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127 + * @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and + * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511 + * @arg FLASH_WRProt_AllPages + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages) +{ + uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF; + + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages)); + + FLASH_Pages = (uint32_t)(~FLASH_Pages); + WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask); + WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8); + WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16); + WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Authorizes the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + FLASH->CR |= CR_OPTPG_Set; + if(WRP0_Data != 0xFF) + { + OB->WRP0 = WRP0_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF)) + { + OB->WRP1 = WRP1_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF)) + { + OB->WRP2 = WRP2_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + + if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF)) + { + OB->WRP3 = WRP3_Data; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + } + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the write protection operation Status */ + return status; +} + +/** + * @brief Enables or disables the read out protection. + * @note If the user has already programmed the other option bytes before calling + * this function, he must re-program them since this function erases all option bytes. + * @note This function can be used for all STM32F10x devices. + * @param Newstate: new state of the ReadOut Protection. + * This parameter can be: ENABLE or DISABLE. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState) +{ + FLASH_Status status = FLASH_COMPLETE; + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* Authorizes the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + FLASH->CR |= CR_OPTER_Set; + FLASH->CR |= CR_STRT_Set; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status == FLASH_COMPLETE) + { + /* if the erase operation is completed, disable the OPTER Bit */ + FLASH->CR &= CR_OPTER_Reset; + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + if(NewState != DISABLE) + { + OB->RDP = 0x00; + } + else + { + OB->RDP = RDP_Key; + } + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + else + { + if(status != FLASH_TIMEOUT) + { + /* Disable the OPTER Bit */ + FLASH->CR &= CR_OPTER_Reset; + } + } + } + /* Return the protection operation Status */ + return status; +} + +/** + * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. + * @note This function can be used for all STM32F10x devices. + * @param OB_IWDG: Selects the IWDG mode + * This parameter can be one of the following values: + * @arg OB_IWDG_SW: Software IWDG selected + * @arg OB_IWDG_HW: Hardware IWDG selected + * @param OB_STOP: Reset event when entering STOP mode. + * This parameter can be one of the following values: + * @arg OB_STOP_NoRST: No reset generated when entering in STOP + * @arg OB_STOP_RST: Reset generated when entering in STOP + * @param OB_STDBY: Reset event when entering Standby mode. + * This parameter can be one of the following values: + * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY + * @arg OB_STDBY_RST: Reset generated when entering in STANDBY + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check the parameters */ + assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); + assert_param(IS_OB_STOP_SOURCE(OB_STOP)); + assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); + + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + + OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8))); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the Option Byte program Status */ + return status; +} + +#ifdef STM32F10X_XL +/** + * @brief Configures to boot from Bank1 or Bank2. + * @note This function can be used only for STM32F10x_XL density devices. + * @param FLASH_BOOT: select the FLASH Bank to boot from. + * This parameter can be one of the following values: + * @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash + * position and this parameter is selected the device will boot from Bank1(Default). + * @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash + * position and this parameter is selected the device will boot from Bank2 or Bank1, + * depending on the activation of the bank. The active banks are checked in + * the following order: Bank2, followed by Bank1. + * The active bank is recognized by the value programmed at the base address + * of the respective bank (corresponding to the initial stack pointer value + * in the interrupt vector table). + * For more information, please refer to AN2606 from www.st.com. + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT) +{ + FLASH_Status status = FLASH_COMPLETE; + assert_param(IS_FLASH_BOOT(FLASH_BOOT)); + /* Authorize the small information block programming */ + FLASH->OPTKEYR = FLASH_KEY1; + FLASH->OPTKEYR = FLASH_KEY2; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + + if(status == FLASH_COMPLETE) + { + /* Enable the Option Bytes Programming operation */ + FLASH->CR |= CR_OPTPG_Set; + + if(FLASH_BOOT == FLASH_BOOT_Bank1) + { + OB->USER |= OB_USER_BFB2; + } + else + { + OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2)); + } + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != FLASH_TIMEOUT) + { + /* if the program operation is completed, disable the OPTPG Bit */ + FLASH->CR &= CR_OPTPG_Reset; + } + } + /* Return the Option Byte program Status */ + return status; +} +#endif /* STM32F10X_XL */ + +/** + * @brief Returns the FLASH User Option Bytes values. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1) + * and RST_STDBY(Bit2). + */ +uint32_t FLASH_GetUserOptionByte(void) +{ + /* Return the User Option Byte */ + return (uint32_t)(FLASH->OBR >> 2); +} + +/** + * @brief Returns the FLASH Write Protection Option Bytes Register value. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval The FLASH Write Protection Option Bytes Register value + */ +uint32_t FLASH_GetWriteProtectionOptionByte(void) +{ + /* Return the Flash write protection Register value */ + return (uint32_t)(FLASH->WRPR); +} + +/** + * @brief Checks whether the FLASH Read Out Protection Status is set or not. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH ReadOut Protection Status(SET or RESET) + */ +FlagStatus FLASH_GetReadOutProtectionStatus(void) +{ + FlagStatus readoutstatus = RESET; + if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET) + { + readoutstatus = SET; + } + else + { + readoutstatus = RESET; + } + return readoutstatus; +} + +/** + * @brief Checks whether the FLASH Prefetch Buffer status is set or not. + * @note This function can be used for all STM32F10x devices. + * @param None + * @retval FLASH Prefetch Buffer Status (SET or RESET). + */ +FlagStatus FLASH_GetPrefetchBufferStatus(void) +{ + FlagStatus bitstatus = RESET; + + if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */ + return bitstatus; +} + +/** + * @brief Enables or disables the specified FLASH interrupts. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts + for Bank1 and Bank2. + * - For other devices it enables or disables the specified FLASH interrupts for Bank1. + * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg FLASH_IT_ERROR: FLASH Error Interrupt + * @arg FLASH_IT_EOP: FLASH end of operation Interrupt + * @param NewState: new state of the specified Flash interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState) +{ +#ifdef STM32F10X_XL + /* Check the parameters */ + assert_param(IS_FLASH_IT(FLASH_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if((FLASH_IT & 0x80000000) != 0x0) + { + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF); + } + else + { + /* Disable the interrupt sources */ + FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF); + } + } + else + { + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR |= FLASH_IT; + } + else + { + /* Disable the interrupt sources */ + FLASH->CR &= ~(uint32_t)FLASH_IT; + } + } +#else + /* Check the parameters */ + assert_param(IS_FLASH_IT(FLASH_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if(NewState != DISABLE) + { + /* Enable the interrupt sources */ + FLASH->CR |= FLASH_IT; + } + else + { + /* Disable the interrupt sources */ + FLASH->CR &= ~(uint32_t)FLASH_IT; + } +#endif /* STM32F10X_XL */ +} + +/** + * @brief Checks whether the specified FLASH flag is set or not. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices, this function checks whether the specified + * Bank1 or Bank2 flag is set or not. + * - For other devices, it checks whether the specified Bank1 flag is + * set or not. + * @param FLASH_FLAG: specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg FLASH_FLAG_BSY: FLASH Busy flag + * @arg FLASH_FLAG_PGERR: FLASH Program error flag + * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @arg FLASH_FLAG_OPTERR: FLASH Option Byte error flag + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG) +{ + FlagStatus bitstatus = RESET; + +#ifdef STM32F10X_XL + /* Check the parameters */ + assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; + if(FLASH_FLAG == FLASH_FLAG_OPTERR) + { + if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH_FLAG & 0x80000000) != 0x0) + { + if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + } +#else + /* Check the parameters */ + assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; + if(FLASH_FLAG == FLASH_FLAG_OPTERR) + { + if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } + else + { + if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + } +#endif /* STM32F10X_XL */ + + /* Return the new state of FLASH_FLAG (SET or RESET) */ + return bitstatus; +} + +/** + * @brief Clears the FLASH's pending flags. + * @note This function can be used for all STM32F10x devices. + * - For STM32F10X_XL devices, this function clears Bank1 or Bank2s pending flags + * - For other devices, it clears Bank1s pending flags. + * @param FLASH_FLAG: specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg FLASH_FLAG_PGERR: FLASH Program error flag + * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag + * @arg FLASH_FLAG_EOP: FLASH End of Operation flag + * @retval None + */ +void FLASH_ClearFlag(uint32_t FLASH_FLAG) +{ +#ifdef STM32F10X_XL + /* Check the parameters */ + assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; + + if((FLASH_FLAG & 0x80000000) != 0x0) + { + /* Clear the flags */ + FLASH->SR2 = FLASH_FLAG; + } + else + { + /* Clear the flags */ + FLASH->SR = FLASH_FLAG; + } + +#else + /* Check the parameters */ + assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; + + /* Clear the flags */ + FLASH->SR = FLASH_FLAG; +#endif /* STM32F10X_XL */ +} + +/** + * @brief Returns the FLASH Status. + * @note This function can be used for all STM32F10x devices, it is equivalent + * to FLASH_GetBank1Status function. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetStatus(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR & FLASH_FLAG_PGERR) != 0) + { + flashstatus = FLASH_ERROR_PG; + } + else + { + if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 ) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + /* Return the Flash Status */ + return flashstatus; +} + +/** + * @brief Returns the FLASH Bank1 Status. + * @note This function can be used for all STM32F10x devices, it is equivalent + * to FLASH_GetStatus function. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetBank1Status(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0) + { + flashstatus = FLASH_ERROR_PG; + } + else + { + if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 ) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + /* Return the Flash Status */ + return flashstatus; +} + +#ifdef STM32F10X_XL +/** + * @brief Returns the FLASH Bank2 Status. + * @note This function can be used for STM32F10x_XL density devices. + * @param None + * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, + * FLASH_ERROR_WRP or FLASH_COMPLETE + */ +FLASH_Status FLASH_GetBank2Status(void) +{ + FLASH_Status flashstatus = FLASH_COMPLETE; + + if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) + { + flashstatus = FLASH_BUSY; + } + else + { + if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0) + { + flashstatus = FLASH_ERROR_PG; + } + else + { + if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 ) + { + flashstatus = FLASH_ERROR_WRP; + } + else + { + flashstatus = FLASH_COMPLETE; + } + } + } + /* Return the Flash Status */ + return flashstatus; +} +#endif /* STM32F10X_XL */ +/** + * @brief Waits for a Flash operation to complete or a TIMEOUT to occur. + * @note This function can be used for all STM32F10x devices, + * it is equivalent to FLASH_WaitForLastBank1Operation. + * - For STM32F10X_XL devices this function waits for a Bank1 Flash operation + * to complete or a TIMEOUT to occur. + * - For all other devices it waits for a Flash operation to complete + * or a TIMEOUT to occur. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the Flash Status */ + status = FLASH_GetBank1Status(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while((status == FLASH_BUSY) && (Timeout != 0x00)) + { + status = FLASH_GetBank1Status(); + Timeout--; + } + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} + +/** + * @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur. + * @note This function can be used for all STM32F10x devices, + * it is equivalent to FLASH_WaitForLastOperation. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the Flash Status */ + status = FLASH_GetBank1Status(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00)) + { + status = FLASH_GetBank1Status(); + Timeout--; + } + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} + +#ifdef STM32F10X_XL +/** + * @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur. + * @note This function can be used only for STM32F10x_XL density devices. + * @param Timeout: FLASH programming Timeout + * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, + * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. + */ +FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout) +{ + FLASH_Status status = FLASH_COMPLETE; + + /* Check for the Flash Status */ + status = FLASH_GetBank2Status(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00)) + { + status = FLASH_GetBank2Status(); + Timeout--; + } + if(Timeout == 0x00 ) + { + status = FLASH_TIMEOUT; + } + /* Return the operation status */ + return status; +} +#endif /* STM32F10X_XL */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_fsmc.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_fsmc.c new file mode 100644 index 0000000..51669ee --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_fsmc.c @@ -0,0 +1,866 @@ +/** + ****************************************************************************** + * @file stm32f10x_fsmc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the FSMC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_fsmc.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup FSMC + * @brief FSMC driver modules + * @{ + */ + +/** @defgroup FSMC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup FSMC_Private_Defines + * @{ + */ + +/* --------------------- FSMC registers bit mask ---------------------------- */ + +/* FSMC BCRx Mask */ +#define BCR_MBKEN_Set ((uint32_t)0x00000001) +#define BCR_MBKEN_Reset ((uint32_t)0x000FFFFE) +#define BCR_FACCEN_Set ((uint32_t)0x00000040) + +/* FSMC PCRx Mask */ +#define PCR_PBKEN_Set ((uint32_t)0x00000004) +#define PCR_PBKEN_Reset ((uint32_t)0x000FFFFB) +#define PCR_ECCEN_Set ((uint32_t)0x00000040) +#define PCR_ECCEN_Reset ((uint32_t)0x000FFFBF) +#define PCR_MemoryType_NAND ((uint32_t)0x00000008) +/** + * @} + */ + +/** @defgroup FSMC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup FSMC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup FSMC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup FSMC_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the FSMC NOR/SRAM Banks registers to their default + * reset values. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 + * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 + * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 + * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 + * @retval None + */ +void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank) +{ + /* Check the parameter */ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); + + /* FSMC_Bank1_NORSRAM1 */ + if(FSMC_Bank == FSMC_Bank1_NORSRAM1) + { + FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB; + } + /* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */ + else + { + FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2; + } + FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF; + FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF; +} + +/** + * @brief Deinitializes the FSMC NAND Banks registers to their default reset values. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @retval None + */ +void FSMC_NANDDeInit(uint32_t FSMC_Bank) +{ + /* Check the parameter */ + assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + /* Set the FSMC_Bank2 registers to their reset values */ + FSMC_Bank2->PCR2 = 0x00000018; + FSMC_Bank2->SR2 = 0x00000040; + FSMC_Bank2->PMEM2 = 0xFCFCFCFC; + FSMC_Bank2->PATT2 = 0xFCFCFCFC; + } + /* FSMC_Bank3_NAND */ + else + { + /* Set the FSMC_Bank3 registers to their reset values */ + FSMC_Bank3->PCR3 = 0x00000018; + FSMC_Bank3->SR3 = 0x00000040; + FSMC_Bank3->PMEM3 = 0xFCFCFCFC; + FSMC_Bank3->PATT3 = 0xFCFCFCFC; + } +} + +/** + * @brief Deinitializes the FSMC PCCARD Bank registers to their default reset values. + * @param None + * @retval None + */ +void FSMC_PCCARDDeInit(void) +{ + /* Set the FSMC_Bank4 registers to their reset values */ + FSMC_Bank4->PCR4 = 0x00000018; + FSMC_Bank4->SR4 = 0x00000000; + FSMC_Bank4->PMEM4 = 0xFCFCFCFC; + FSMC_Bank4->PATT4 = 0xFCFCFCFC; + FSMC_Bank4->PIO4 = 0xFCFCFCFC; +} + +/** + * @brief Initializes the FSMC NOR/SRAM Banks according to the specified + * parameters in the FSMC_NORSRAMInitStruct. + * @param FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef + * structure that contains the configuration information for + * the FSMC NOR/SRAM specified Banks. + * @retval None + */ +void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank)); + assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux)); + assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType)); + assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth)); + assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode)); + assert_param(IS_FSMC_ASYNWAIT(FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait)); + assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity)); + assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode)); + assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive)); + assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation)); + assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal)); + assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode)); + assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst)); + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration)); + assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode)); + + /* Bank1 NOR/SRAM control register configuration */ + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux | + FSMC_NORSRAMInitStruct->FSMC_MemoryType | + FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth | + FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode | + FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait | + FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity | + FSMC_NORSRAMInitStruct->FSMC_WrapMode | + FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive | + FSMC_NORSRAMInitStruct->FSMC_WriteOperation | + FSMC_NORSRAMInitStruct->FSMC_WaitSignal | + FSMC_NORSRAMInitStruct->FSMC_ExtendedMode | + FSMC_NORSRAMInitStruct->FSMC_WriteBurst; + + if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR) + { + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)BCR_FACCEN_Set; + } + + /* Bank1 NOR/SRAM timing register configuration */ + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) | + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode; + + + /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */ + if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable) + { + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime)); + assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode)); + FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )| + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) | + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode; + } + else + { + FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF; + } +} + +/** + * @brief Initializes the FSMC NAND Banks according to the specified + * parameters in the FSMC_NANDInitStruct. + * @param FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef + * structure that contains the configuration information for the FSMC + * NAND specified Banks. + * @retval None + */ +void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) +{ + uint32_t tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000; + + /* Check the parameters */ + assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank)); + assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature)); + assert_param( IS_FSMC_MEMORY_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth)); + assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC)); + assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize)); + assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime)); + assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime)); + assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); + assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); + + /* Set the tmppcr value according to FSMC_NANDInitStruct parameters */ + tmppcr = (uint32_t)FSMC_NANDInitStruct->FSMC_Waitfeature | + PCR_MemoryType_NAND | + FSMC_NANDInitStruct->FSMC_MemoryDataWidth | + FSMC_NANDInitStruct->FSMC_ECC | + FSMC_NANDInitStruct->FSMC_ECCPageSize | + (FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )| + (FSMC_NANDInitStruct->FSMC_TARSetupTime << 13); + + /* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */ + tmppmem = (uint32_t)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | + (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + /* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */ + tmppatt = (uint32_t)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | + (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND) + { + /* FSMC_Bank2_NAND registers configuration */ + FSMC_Bank2->PCR2 = tmppcr; + FSMC_Bank2->PMEM2 = tmppmem; + FSMC_Bank2->PATT2 = tmppatt; + } + else + { + /* FSMC_Bank3_NAND registers configuration */ + FSMC_Bank3->PCR3 = tmppcr; + FSMC_Bank3->PMEM3 = tmppmem; + FSMC_Bank3->PATT3 = tmppatt; + } +} + +/** + * @brief Initializes the FSMC PCCARD Bank according to the specified + * parameters in the FSMC_PCCARDInitStruct. + * @param FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef + * structure that contains the configuration information for the FSMC + * PCCARD Bank. + * @retval None + */ +void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) +{ + /* Check the parameters */ + assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature)); + assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime)); + assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime)); + + assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); + + assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); + assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime)); + assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime)); + assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime)); + assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime)); + + /* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */ + FSMC_Bank4->PCR4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_Waitfeature | + FSMC_MemoryDataWidth_16b | + (FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) | + (FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13); + + /* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */ + FSMC_Bank4->PMEM4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | + (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + /* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */ + FSMC_Bank4->PATT4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | + (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); + + /* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */ + FSMC_Bank4->PIO4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime | + (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) | + (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)| + (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24); +} + +/** + * @brief Fills each FSMC_NORSRAMInitStruct member with its default value. + * @param FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef + * structure which will be initialized. + * @retval None + */ +void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) +{ + /* Reset NOR/SRAM Init structure parameters values */ + FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1; + FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable; + FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM; + FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; + FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; + FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; + FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable; + FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; +} + +/** + * @brief Fills each FSMC_NANDInitStruct member with its default value. + * @param FSMC_NANDInitStruct: pointer to a FSMC_NANDInitTypeDef + * structure which will be initialized. + * @retval None + */ +void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) +{ + /* Reset NAND Init structure parameters values */ + FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND; + FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; + FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; + FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable; + FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes; + FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0; + FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; +} + +/** + * @brief Fills each FSMC_PCCARDInitStruct member with its default value. + * @param FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef + * structure which will be initialized. + * @retval None + */ +void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) +{ + /* Reset PCCARD Init structure parameters values */ + FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; + FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0; + FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; + FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; +} + +/** + * @brief Enables or disables the specified NOR/SRAM Memory Bank. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 + * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 + * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 + * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 + * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */ + FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_Set; + } + else + { + /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */ + FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_Reset; + } +} + +/** + * @brief Enables or disables the specified NAND Memory Bank. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 |= PCR_PBKEN_Set; + } + else + { + FSMC_Bank3->PCR3 |= PCR_PBKEN_Set; + } + } + else + { + /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 &= PCR_PBKEN_Reset; + } + else + { + FSMC_Bank3->PCR3 &= PCR_PBKEN_Reset; + } + } +} + +/** + * @brief Enables or disables the PCCARD Memory Bank. + * @param NewState: new state of the PCCARD Memory Bank. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_PCCARDCmd(FunctionalState NewState) +{ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */ + FSMC_Bank4->PCR4 |= PCR_PBKEN_Set; + } + else + { + /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */ + FSMC_Bank4->PCR4 &= PCR_PBKEN_Reset; + } +} + +/** + * @brief Enables or disables the FSMC NAND ECC feature. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @param NewState: new state of the FSMC NAND ECC feature. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 |= PCR_ECCEN_Set; + } + else + { + FSMC_Bank3->PCR3 |= PCR_ECCEN_Set; + } + } + else + { + /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->PCR2 &= PCR_ECCEN_Reset; + } + else + { + FSMC_Bank3->PCR3 &= PCR_ECCEN_Reset; + } + } +} + +/** + * @brief Returns the error correction code register value. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @retval The Error Correction Code (ECC) value. + */ +uint32_t FSMC_GetECC(uint32_t FSMC_Bank) +{ + uint32_t eccval = 0x00000000; + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + /* Get the ECCR2 register value */ + eccval = FSMC_Bank2->ECCR2; + } + else + { + /* Get the ECCR3 register value */ + eccval = FSMC_Bank3->ECCR3; + } + /* Return the error correction code value */ + return(eccval); +} + +/** + * @brief Enables or disables the specified FSMC interrupts. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_IT: specifies the FSMC interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FSMC_IT_Level: Level edge detection interrupt. + * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. + * @param NewState: new state of the specified FSMC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState) +{ + assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); + assert_param(IS_FSMC_IT(FSMC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected FSMC_Bank2 interrupts */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->SR2 |= FSMC_IT; + } + /* Enable the selected FSMC_Bank3 interrupts */ + else if (FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 |= FSMC_IT; + } + /* Enable the selected FSMC_Bank4 interrupts */ + else + { + FSMC_Bank4->SR4 |= FSMC_IT; + } + } + else + { + /* Disable the selected FSMC_Bank2 interrupts */ + if(FSMC_Bank == FSMC_Bank2_NAND) + { + + FSMC_Bank2->SR2 &= (uint32_t)~FSMC_IT; + } + /* Disable the selected FSMC_Bank3 interrupts */ + else if (FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 &= (uint32_t)~FSMC_IT; + } + /* Disable the selected FSMC_Bank4 interrupts */ + else + { + FSMC_Bank4->SR4 &= (uint32_t)~FSMC_IT; + } + } +} + +/** + * @brief Checks whether the specified FSMC flag is set or not. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag. + * @arg FSMC_FLAG_Level: Level detection Flag. + * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag. + * @arg FSMC_FLAG_FEMPT: Fifo empty Flag. + * @retval The new state of FSMC_FLAG (SET or RESET). + */ +FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG) +{ + FlagStatus bitstatus = RESET; + uint32_t tmpsr = 0x00000000; + + /* Check the parameters */ + assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); + assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + tmpsr = FSMC_Bank2->SR2; + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + tmpsr = FSMC_Bank3->SR3; + } + /* FSMC_Bank4_PCCARD*/ + else + { + tmpsr = FSMC_Bank4->SR4; + } + + /* Get the flag status */ + if ((tmpsr & FSMC_FLAG) != (uint16_t)RESET ) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the FSMC's pending flags. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag. + * @arg FSMC_FLAG_Level: Level detection Flag. + * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag. + * @retval None + */ +void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); + assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ; + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->SR2 &= ~FSMC_FLAG; + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 &= ~FSMC_FLAG; + } + /* FSMC_Bank4_PCCARD*/ + else + { + FSMC_Bank4->SR4 &= ~FSMC_FLAG; + } +} + +/** + * @brief Checks whether the specified FSMC interrupt has occurred or not. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_IT: specifies the FSMC interrupt source to check. + * This parameter can be one of the following values: + * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FSMC_IT_Level: Level edge detection interrupt. + * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. + * @retval The new state of FSMC_IT (SET or RESET). + */ +ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT) +{ + ITStatus bitstatus = RESET; + uint32_t tmpsr = 0x0, itstatus = 0x0, itenable = 0x0; + + /* Check the parameters */ + assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); + assert_param(IS_FSMC_GET_IT(FSMC_IT)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + tmpsr = FSMC_Bank2->SR2; + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + tmpsr = FSMC_Bank3->SR3; + } + /* FSMC_Bank4_PCCARD*/ + else + { + tmpsr = FSMC_Bank4->SR4; + } + + itstatus = tmpsr & FSMC_IT; + + itenable = tmpsr & (FSMC_IT >> 3); + if ((itstatus != (uint32_t)RESET) && (itenable != (uint32_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the FSMC's interrupt pending bits. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND + * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND + * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD + * @param FSMC_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. + * @arg FSMC_IT_Level: Level edge detection interrupt. + * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. + * @retval None + */ +void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT) +{ + /* Check the parameters */ + assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); + assert_param(IS_FSMC_IT(FSMC_IT)); + + if(FSMC_Bank == FSMC_Bank2_NAND) + { + FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3); + } + else if(FSMC_Bank == FSMC_Bank3_NAND) + { + FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3); + } + /* FSMC_Bank4_PCCARD*/ + else + { + FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3); + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_gpio.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_gpio.c new file mode 100644 index 0000000..457ff11 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_gpio.c @@ -0,0 +1,650 @@ +/** + ****************************************************************************** + * @file stm32f10x_gpio.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the GPIO firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_gpio.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup GPIO + * @brief GPIO driver modules + * @{ + */ + +/** @defgroup GPIO_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_Defines + * @{ + */ + +/* ------------ RCC registers bit address in the alias region ----------------*/ +#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE) + +/* --- EVENTCR Register -----*/ + +/* Alias word address of EVOE bit */ +#define EVCR_OFFSET (AFIO_OFFSET + 0x00) +#define EVOE_BitNumber ((uint8_t)0x07) +#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4)) + + +/* --- MAPR Register ---*/ +/* Alias word address of MII_RMII_SEL bit */ +#define MAPR_OFFSET (AFIO_OFFSET + 0x04) +#define MII_RMII_SEL_BitNumber ((u8)0x17) +#define MAPR_MII_RMII_SEL_BB (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4)) + + +#define EVCR_PORTPINCONFIG_MASK ((uint16_t)0xFF80) +#define LSB_MASK ((uint16_t)0xFFFF) +#define DBGAFR_POSITION_MASK ((uint32_t)0x000F0000) +#define DBGAFR_SWJCFG_MASK ((uint32_t)0xF0FFFFFF) +#define DBGAFR_LOCATION_MASK ((uint32_t)0x00200000) +#define DBGAFR_NUMBITS_MASK ((uint32_t)0x00100000) +/** + * @} + */ + +/** @defgroup GPIO_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup GPIO_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the GPIOx peripheral registers to their default reset values. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @retval None + */ +void GPIO_DeInit(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + if (GPIOx == GPIOA) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE); + } + else if (GPIOx == GPIOB) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE); + } + else if (GPIOx == GPIOC) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE); + } + else if (GPIOx == GPIOD) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE); + } + else if (GPIOx == GPIOE) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE); + } + else if (GPIOx == GPIOF) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE); + } + else + { + if (GPIOx == GPIOG) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE); + } + } +} + +/** + * @brief Deinitializes the Alternate Functions (remap, event control + * and EXTI configuration) registers to their default reset values. + * @param None + * @retval None + */ +void GPIO_AFIODeInit(void) +{ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE); +} + +/** + * @brief Initializes the GPIOx peripheral according to the specified + * parameters in the GPIO_InitStruct. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that + * contains the configuration information for the specified GPIO peripheral. + * @retval None + */ +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct) +{ + uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00; + uint32_t tmpreg = 0x00, pinmask = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode)); + assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin)); + +/*---------------------------- GPIO Mode Configuration -----------------------*/ + currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F); + if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00) + { + /* Check the parameters */ + assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed)); + /* Output mode */ + currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed; + } +/*---------------------------- GPIO CRL Configuration ------------------------*/ + /* Configure the eight low port pins */ + if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00) + { + tmpreg = GPIOx->CRL; + for (pinpos = 0x00; pinpos < 0x08; pinpos++) + { + pos = ((uint32_t)0x01) << pinpos; + /* Get the port pins position */ + currentpin = (GPIO_InitStruct->GPIO_Pin) & pos; + if (currentpin == pos) + { + pos = pinpos << 2; + /* Clear the corresponding low control register bits */ + pinmask = ((uint32_t)0x0F) << pos; + tmpreg &= ~pinmask; + /* Write the mode configuration in the corresponding bits */ + tmpreg |= (currentmode << pos); + /* Reset the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) + { + GPIOx->BRR = (((uint32_t)0x01) << pinpos); + } + else + { + /* Set the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) + { + GPIOx->BSRR = (((uint32_t)0x01) << pinpos); + } + } + } + } + GPIOx->CRL = tmpreg; + } +/*---------------------------- GPIO CRH Configuration ------------------------*/ + /* Configure the eight high port pins */ + if (GPIO_InitStruct->GPIO_Pin > 0x00FF) + { + tmpreg = GPIOx->CRH; + for (pinpos = 0x00; pinpos < 0x08; pinpos++) + { + pos = (((uint32_t)0x01) << (pinpos + 0x08)); + /* Get the port pins position */ + currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos); + if (currentpin == pos) + { + pos = pinpos << 2; + /* Clear the corresponding high control register bits */ + pinmask = ((uint32_t)0x0F) << pos; + tmpreg &= ~pinmask; + /* Write the mode configuration in the corresponding bits */ + tmpreg |= (currentmode << pos); + /* Reset the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) + { + GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08)); + } + /* Set the corresponding ODR bit */ + if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) + { + GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08)); + } + } + } + GPIOx->CRH = tmpreg; + } +} + +/** + * @brief Fills each GPIO_InitStruct member with its default value. + * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will + * be initialized. + * @retval None + */ +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct) +{ + /* Reset GPIO init structure parameters values */ + GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All; + GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING; +} + +/** + * @brief Reads the specified input port pin. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_Pin_x where x can be (0..15). + * @retval The input port pin value. + */ +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + return bitstatus; +} + +/** + * @brief Reads the specified GPIO input data port. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @retval GPIO input data port value. + */ +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + return ((uint16_t)GPIOx->IDR); +} + +/** + * @brief Reads the specified output data port bit. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_Pin_x where x can be (0..15). + * @retval The output port pin value. + */ +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint8_t bitstatus = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET) + { + bitstatus = (uint8_t)Bit_SET; + } + else + { + bitstatus = (uint8_t)Bit_RESET; + } + return bitstatus; +} + +/** + * @brief Reads the specified GPIO output data port. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @retval GPIO output data port value. + */ +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + return ((uint16_t)GPIOx->ODR); +} + +/** + * @brief Sets the selected data port bits. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bits to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->BSRR = GPIO_Pin; +} + +/** + * @brief Clears the selected data port bits. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bits to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + GPIOx->BRR = GPIO_Pin; +} + +/** + * @brief Sets or clears the selected data port bit. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_Pin_x where x can be (0..15). + * @param BitVal: specifies the value to be written to the selected bit. + * This parameter can be one of the BitAction enum values: + * @arg Bit_RESET: to clear the port pin + * @arg Bit_SET: to set the port pin + * @retval None + */ +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_BIT_ACTION(BitVal)); + + if (BitVal != Bit_RESET) + { + GPIOx->BSRR = GPIO_Pin; + } + else + { + GPIOx->BRR = GPIO_Pin; + } +} + +/** + * @brief Writes data to the specified GPIO data port. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param PortVal: specifies the value to be written to the port output data register. + * @retval None + */ +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal) +{ + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + + GPIOx->ODR = PortVal; +} + +/** + * @brief Locks GPIO Pins configuration registers. + * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + uint32_t tmp = 0x00010000; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + tmp |= GPIO_Pin; + /* Set LCKK bit */ + GPIOx->LCKR = tmp; + /* Reset LCKK bit */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKK bit */ + GPIOx->LCKR = tmp; + /* Read LCKK bit*/ + tmp = GPIOx->LCKR; + /* Read LCKK bit*/ + tmp = GPIOx->LCKR; +} + +/** + * @brief Selects the GPIO pin used as Event output. + * @param GPIO_PortSource: selects the GPIO port to be used as source + * for Event output. + * This parameter can be GPIO_PortSourceGPIOx where x can be (A..E). + * @param GPIO_PinSource: specifies the pin for the Event output. + * This parameter can be GPIO_PinSourcex where x can be (0..15). + * @retval None + */ +void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) +{ + uint32_t tmpreg = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource)); + assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); + + tmpreg = AFIO->EVCR; + /* Clear the PORT[6:4] and PIN[3:0] bits */ + tmpreg &= EVCR_PORTPINCONFIG_MASK; + tmpreg |= (uint32_t)GPIO_PortSource << 0x04; + tmpreg |= GPIO_PinSource; + AFIO->EVCR = tmpreg; +} + +/** + * @brief Enables or disables the Event Output. + * @param NewState: new state of the Event output. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void GPIO_EventOutputCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState; +} + +/** + * @brief Changes the mapping of the specified pin. + * @param GPIO_Remap: selects the pin to remap. + * This parameter can be one of the following values: + * @arg GPIO_Remap_SPI1 : SPI1 Alternate Function mapping + * @arg GPIO_Remap_I2C1 : I2C1 Alternate Function mapping + * @arg GPIO_Remap_USART1 : USART1 Alternate Function mapping + * @arg GPIO_Remap_USART2 : USART2 Alternate Function mapping + * @arg GPIO_PartialRemap_USART3 : USART3 Partial Alternate Function mapping + * @arg GPIO_FullRemap_USART3 : USART3 Full Alternate Function mapping + * @arg GPIO_PartialRemap_TIM1 : TIM1 Partial Alternate Function mapping + * @arg GPIO_FullRemap_TIM1 : TIM1 Full Alternate Function mapping + * @arg GPIO_PartialRemap1_TIM2 : TIM2 Partial1 Alternate Function mapping + * @arg GPIO_PartialRemap2_TIM2 : TIM2 Partial2 Alternate Function mapping + * @arg GPIO_FullRemap_TIM2 : TIM2 Full Alternate Function mapping + * @arg GPIO_PartialRemap_TIM3 : TIM3 Partial Alternate Function mapping + * @arg GPIO_FullRemap_TIM3 : TIM3 Full Alternate Function mapping + * @arg GPIO_Remap_TIM4 : TIM4 Alternate Function mapping + * @arg GPIO_Remap1_CAN1 : CAN1 Alternate Function mapping + * @arg GPIO_Remap2_CAN1 : CAN1 Alternate Function mapping + * @arg GPIO_Remap_PD01 : PD01 Alternate Function mapping + * @arg GPIO_Remap_TIM5CH4_LSI : LSI connected to TIM5 Channel4 input capture for calibration + * @arg GPIO_Remap_ADC1_ETRGINJ : ADC1 External Trigger Injected Conversion remapping + * @arg GPIO_Remap_ADC1_ETRGREG : ADC1 External Trigger Regular Conversion remapping + * @arg GPIO_Remap_ADC2_ETRGINJ : ADC2 External Trigger Injected Conversion remapping + * @arg GPIO_Remap_ADC2_ETRGREG : ADC2 External Trigger Regular Conversion remapping + * @arg GPIO_Remap_ETH : Ethernet remapping (only for Connectivity line devices) + * @arg GPIO_Remap_CAN2 : CAN2 remapping (only for Connectivity line devices) + * @arg GPIO_Remap_SWJ_NoJTRST : Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST + * @arg GPIO_Remap_SWJ_JTAGDisable : JTAG-DP Disabled and SW-DP Enabled + * @arg GPIO_Remap_SWJ_Disable : Full SWJ Disabled (JTAG-DP + SW-DP) + * @arg GPIO_Remap_SPI3 : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) + * When the SPI3/I2S3 is remapped using this function, the SWJ is configured + * to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST. + * @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected + * to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices) + * If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to + * Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output. + * @arg GPIO_Remap_PTP_PPS : Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) + * @arg GPIO_Remap_TIM15 : TIM15 Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_TIM16 : TIM16 Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_TIM17 : TIM17 Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_CEC : CEC Alternate Function mapping (only for Value line devices) + * @arg GPIO_Remap_TIM1_DMA : TIM1 DMA requests mapping (only for Value line devices) + * @arg GPIO_Remap_TIM9 : TIM9 Alternate Function mapping (only for XL-density devices) + * @arg GPIO_Remap_TIM10 : TIM10 Alternate Function mapping (only for XL-density devices) + * @arg GPIO_Remap_TIM11 : TIM11 Alternate Function mapping (only for XL-density devices) + * @arg GPIO_Remap_TIM13 : TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) + * @arg GPIO_Remap_TIM14 : TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) + * @arg GPIO_Remap_FSMC_NADV : FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) + * @arg GPIO_Remap_TIM67_DAC_DMA : TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) + * @arg GPIO_Remap_TIM12 : TIM12 Alternate Function mapping (only for High density Value line devices) + * @arg GPIO_Remap_MISC : Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, + * only for High density Value line devices) + * @param NewState: new state of the port pin remapping. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState) +{ + uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00; + + /* Check the parameters */ + assert_param(IS_GPIO_REMAP(GPIO_Remap)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if((GPIO_Remap & 0x80000000) == 0x80000000) + { + tmpreg = AFIO->MAPR2; + } + else + { + tmpreg = AFIO->MAPR; + } + + tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10; + tmp = GPIO_Remap & LSB_MASK; + + if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) + { + tmpreg &= DBGAFR_SWJCFG_MASK; + AFIO->MAPR &= DBGAFR_SWJCFG_MASK; + } + else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK) + { + tmp1 = ((uint32_t)0x03) << tmpmask; + tmpreg &= ~tmp1; + tmpreg |= ~DBGAFR_SWJCFG_MASK; + } + else + { + tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10)); + tmpreg |= ~DBGAFR_SWJCFG_MASK; + } + + if (NewState != DISABLE) + { + tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10)); + } + + if((GPIO_Remap & 0x80000000) == 0x80000000) + { + AFIO->MAPR2 = tmpreg; + } + else + { + AFIO->MAPR = tmpreg; + } +} + +/** + * @brief Selects the GPIO pin used as EXTI Line. + * @param GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines. + * This parameter can be GPIO_PortSourceGPIOx where x can be (A..G). + * @param GPIO_PinSource: specifies the EXTI line to be configured. + * This parameter can be GPIO_PinSourcex where x can be (0..15). + * @retval None + */ +void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) +{ + uint32_t tmp = 0x00; + /* Check the parameters */ + assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource)); + assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); + + tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)); + AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp; + AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03))); +} + +/** + * @brief Selects the Ethernet media interface. + * @note This function applies only to STM32 Connectivity line devices. + * @param GPIO_ETH_MediaInterface: specifies the Media Interface mode. + * This parameter can be one of the following values: + * @arg GPIO_ETH_MediaInterface_MII: MII mode + * @arg GPIO_ETH_MediaInterface_RMII: RMII mode + * @retval None + */ +void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface) +{ + assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface)); + + /* Configure MII_RMII selection bit */ + *(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_i2c.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_i2c.c new file mode 100644 index 0000000..4ea321c --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_i2c.c @@ -0,0 +1,1331 @@ +/** + ****************************************************************************** + * @file stm32f10x_i2c.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the I2C firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_i2c.h" +#include "stm32f10x_rcc.h" + + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup I2C + * @brief I2C driver modules + * @{ + */ + +/** @defgroup I2C_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Private_Defines + * @{ + */ + +/* I2C SPE mask */ +#define CR1_PE_Set ((uint16_t)0x0001) +#define CR1_PE_Reset ((uint16_t)0xFFFE) + +/* I2C START mask */ +#define CR1_START_Set ((uint16_t)0x0100) +#define CR1_START_Reset ((uint16_t)0xFEFF) + +/* I2C STOP mask */ +#define CR1_STOP_Set ((uint16_t)0x0200) +#define CR1_STOP_Reset ((uint16_t)0xFDFF) + +/* I2C ACK mask */ +#define CR1_ACK_Set ((uint16_t)0x0400) +#define CR1_ACK_Reset ((uint16_t)0xFBFF) + +/* I2C ENGC mask */ +#define CR1_ENGC_Set ((uint16_t)0x0040) +#define CR1_ENGC_Reset ((uint16_t)0xFFBF) + +/* I2C SWRST mask */ +#define CR1_SWRST_Set ((uint16_t)0x8000) +#define CR1_SWRST_Reset ((uint16_t)0x7FFF) + +/* I2C PEC mask */ +#define CR1_PEC_Set ((uint16_t)0x1000) +#define CR1_PEC_Reset ((uint16_t)0xEFFF) + +/* I2C ENPEC mask */ +#define CR1_ENPEC_Set ((uint16_t)0x0020) +#define CR1_ENPEC_Reset ((uint16_t)0xFFDF) + +/* I2C ENARP mask */ +#define CR1_ENARP_Set ((uint16_t)0x0010) +#define CR1_ENARP_Reset ((uint16_t)0xFFEF) + +/* I2C NOSTRETCH mask */ +#define CR1_NOSTRETCH_Set ((uint16_t)0x0080) +#define CR1_NOSTRETCH_Reset ((uint16_t)0xFF7F) + +/* I2C registers Masks */ +#define CR1_CLEAR_Mask ((uint16_t)0xFBF5) + +/* I2C DMAEN mask */ +#define CR2_DMAEN_Set ((uint16_t)0x0800) +#define CR2_DMAEN_Reset ((uint16_t)0xF7FF) + +/* I2C LAST mask */ +#define CR2_LAST_Set ((uint16_t)0x1000) +#define CR2_LAST_Reset ((uint16_t)0xEFFF) + +/* I2C FREQ mask */ +#define CR2_FREQ_Reset ((uint16_t)0xFFC0) + +/* I2C ADD0 mask */ +#define OAR1_ADD0_Set ((uint16_t)0x0001) +#define OAR1_ADD0_Reset ((uint16_t)0xFFFE) + +/* I2C ENDUAL mask */ +#define OAR2_ENDUAL_Set ((uint16_t)0x0001) +#define OAR2_ENDUAL_Reset ((uint16_t)0xFFFE) + +/* I2C ADD2 mask */ +#define OAR2_ADD2_Reset ((uint16_t)0xFF01) + +/* I2C F/S mask */ +#define CCR_FS_Set ((uint16_t)0x8000) + +/* I2C CCR mask */ +#define CCR_CCR_Set ((uint16_t)0x0FFF) + +/* I2C FLAG mask */ +#define FLAG_Mask ((uint32_t)0x00FFFFFF) + +/* I2C Interrupt Enable mask */ +#define ITEN_Mask ((uint32_t)0x07000000) + +/** + * @} + */ + +/** @defgroup I2C_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the I2Cx peripheral registers to their default reset values. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval None + */ +void I2C_DeInit(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + if (I2Cx == I2C1) + { + /* Enable I2C1 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE); + /* Release I2C1 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE); + } + else + { + /* Enable I2C2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE); + /* Release I2C2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE); + } +} + +/** + * @brief Initializes the I2Cx peripheral according to the specified + * parameters in the I2C_InitStruct. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_InitStruct: pointer to a I2C_InitTypeDef structure that + * contains the configuration information for the specified I2C peripheral. + * @retval None + */ +void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct) +{ + uint16_t tmpreg = 0, freqrange = 0; + uint16_t result = 0x04; + uint32_t pclk1 = 8000000; + RCC_ClocksTypeDef rcc_clocks; + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLOCK_SPEED(I2C_InitStruct->I2C_ClockSpeed)); + assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode)); + assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle)); + assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1)); + assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack)); + assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress)); + +/*---------------------------- I2Cx CR2 Configuration ------------------------*/ + /* Get the I2Cx CR2 value */ + tmpreg = I2Cx->CR2; + /* Clear frequency FREQ[5:0] bits */ + tmpreg &= CR2_FREQ_Reset; + /* Get pclk1 frequency value */ + RCC_GetClocksFreq(&rcc_clocks); + pclk1 = rcc_clocks.PCLK1_Frequency; + /* Set frequency bits depending on pclk1 value */ + freqrange = (uint16_t)(pclk1 / 1000000); + tmpreg |= freqrange; + /* Write to I2Cx CR2 */ + I2Cx->CR2 = tmpreg; + +/*---------------------------- I2Cx CCR Configuration ------------------------*/ + /* Disable the selected I2C peripheral to configure TRISE */ + I2Cx->CR1 &= CR1_PE_Reset; + /* Reset tmpreg value */ + /* Clear F/S, DUTY and CCR[11:0] bits */ + tmpreg = 0; + + /* Configure speed in standard mode */ + if (I2C_InitStruct->I2C_ClockSpeed <= 100000) + { + /* Standard mode speed calculate */ + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1)); + /* Test if CCR value is under 0x4*/ + if (result < 0x04) + { + /* Set minimum allowed value */ + result = 0x04; + } + /* Set speed value for standard mode */ + tmpreg |= result; + /* Set Maximum Rise Time for standard mode */ + I2Cx->TRISE = freqrange + 1; + } + /* Configure speed in fast mode */ + else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/ + { + if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2) + { + /* Fast mode speed calculate: Tlow/Thigh = 2 */ + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3)); + } + else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/ + { + /* Fast mode speed calculate: Tlow/Thigh = 16/9 */ + result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25)); + /* Set DUTY bit */ + result |= I2C_DutyCycle_16_9; + } + + /* Test if CCR value is under 0x1*/ + if ((result & CCR_CCR_Set) == 0) + { + /* Set minimum allowed value */ + result |= (uint16_t)0x0001; + } + /* Set speed value and set F/S bit for fast mode */ + tmpreg |= (uint16_t)(result | CCR_FS_Set); + /* Set Maximum Rise Time for fast mode */ + I2Cx->TRISE = (uint16_t)(((freqrange * (uint16_t)300) / (uint16_t)1000) + (uint16_t)1); + } + + /* Write to I2Cx CCR */ + I2Cx->CCR = tmpreg; + /* Enable the selected I2C peripheral */ + I2Cx->CR1 |= CR1_PE_Set; + +/*---------------------------- I2Cx CR1 Configuration ------------------------*/ + /* Get the I2Cx CR1 value */ + tmpreg = I2Cx->CR1; + /* Clear ACK, SMBTYPE and SMBUS bits */ + tmpreg &= CR1_CLEAR_Mask; + /* Configure I2Cx: mode and acknowledgement */ + /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */ + /* Set ACK bit according to I2C_Ack value */ + tmpreg |= (uint16_t)((uint32_t)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack); + /* Write to I2Cx CR1 */ + I2Cx->CR1 = tmpreg; + +/*---------------------------- I2Cx OAR1 Configuration -----------------------*/ + /* Set I2Cx Own Address1 and acknowledged address */ + I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1); +} + +/** + * @brief Fills each I2C_InitStruct member with its default value. + * @param I2C_InitStruct: pointer to an I2C_InitTypeDef structure which will be initialized. + * @retval None + */ +void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct) +{ +/*---------------- Reset I2C init structure parameters values ----------------*/ + /* initialize the I2C_ClockSpeed member */ + I2C_InitStruct->I2C_ClockSpeed = 5000; + /* Initialize the I2C_Mode member */ + I2C_InitStruct->I2C_Mode = I2C_Mode_I2C; + /* Initialize the I2C_DutyCycle member */ + I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2; + /* Initialize the I2C_OwnAddress1 member */ + I2C_InitStruct->I2C_OwnAddress1 = 0; + /* Initialize the I2C_Ack member */ + I2C_InitStruct->I2C_Ack = I2C_Ack_Disable; + /* Initialize the I2C_AcknowledgedAddress member */ + I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; +} + +/** + * @brief Enables or disables the specified I2C peripheral. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C peripheral */ + I2Cx->CR1 |= CR1_PE_Set; + } + else + { + /* Disable the selected I2C peripheral */ + I2Cx->CR1 &= CR1_PE_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C DMA requests. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C DMA transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C DMA requests */ + I2Cx->CR2 |= CR2_DMAEN_Set; + } + else + { + /* Disable the selected I2C DMA requests */ + I2Cx->CR2 &= CR2_DMAEN_Reset; + } +} + +/** + * @brief Specifies if the next DMA transfer will be the last one. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C DMA last transfer. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Next DMA transfer is the last transfer */ + I2Cx->CR2 |= CR2_LAST_Set; + } + else + { + /* Next DMA transfer is not the last transfer */ + I2Cx->CR2 &= CR2_LAST_Reset; + } +} + +/** + * @brief Generates I2Cx communication START condition. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C START condition generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Generate a START condition */ + I2Cx->CR1 |= CR1_START_Set; + } + else + { + /* Disable the START condition generation */ + I2Cx->CR1 &= CR1_START_Reset; + } +} + +/** + * @brief Generates I2Cx communication STOP condition. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C STOP condition generation. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Generate a STOP condition */ + I2Cx->CR1 |= CR1_STOP_Set; + } + else + { + /* Disable the STOP condition generation */ + I2Cx->CR1 &= CR1_STOP_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C acknowledge feature. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C Acknowledgement. + * This parameter can be: ENABLE or DISABLE. + * @retval None. + */ +void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the acknowledgement */ + I2Cx->CR1 |= CR1_ACK_Set; + } + else + { + /* Disable the acknowledgement */ + I2Cx->CR1 &= CR1_ACK_Reset; + } +} + +/** + * @brief Configures the specified I2C own address2. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Address: specifies the 7bit I2C own address2. + * @retval None. + */ +void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address) +{ + uint16_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Get the old register value */ + tmpreg = I2Cx->OAR2; + + /* Reset I2Cx Own address2 bit [7:1] */ + tmpreg &= OAR2_ADD2_Reset; + + /* Set I2Cx Own address2 */ + tmpreg |= (uint16_t)((uint16_t)Address & (uint16_t)0x00FE); + + /* Store the new register value */ + I2Cx->OAR2 = tmpreg; +} + +/** + * @brief Enables or disables the specified I2C dual addressing mode. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C dual addressing mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable dual addressing mode */ + I2Cx->OAR2 |= OAR2_ENDUAL_Set; + } + else + { + /* Disable dual addressing mode */ + I2Cx->OAR2 &= OAR2_ENDUAL_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C general call feature. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C General call. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable generall call */ + I2Cx->CR1 |= CR1_ENGC_Set; + } + else + { + /* Disable generall call */ + I2Cx->CR1 &= CR1_ENGC_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C interrupts. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_IT: specifies the I2C interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg I2C_IT_BUF: Buffer interrupt mask + * @arg I2C_IT_EVT: Event interrupt mask + * @arg I2C_IT_ERR: Error interrupt mask + * @param NewState: new state of the specified I2C interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_I2C_CONFIG_IT(I2C_IT)); + + if (NewState != DISABLE) + { + /* Enable the selected I2C interrupts */ + I2Cx->CR2 |= I2C_IT; + } + else + { + /* Disable the selected I2C interrupts */ + I2Cx->CR2 &= (uint16_t)~I2C_IT; + } +} + +/** + * @brief Sends a data byte through the I2Cx peripheral. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Data: Byte to be transmitted.. + * @retval None + */ +void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + /* Write in the DR register the data to be sent */ + I2Cx->DR = Data; +} + +/** + * @brief Returns the most recent received data by the I2Cx peripheral. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval The value of the received data. + */ +uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + /* Return the data in the DR register */ + return (uint8_t)I2Cx->DR; +} + +/** + * @brief Transmits the address byte to select the slave device. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param Address: specifies the slave address which will be transmitted + * @param I2C_Direction: specifies whether the I2C device will be a + * Transmitter or a Receiver. This parameter can be one of the following values + * @arg I2C_Direction_Transmitter: Transmitter mode + * @arg I2C_Direction_Receiver: Receiver mode + * @retval None. + */ +void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_DIRECTION(I2C_Direction)); + /* Test on the direction to set/reset the read/write bit */ + if (I2C_Direction != I2C_Direction_Transmitter) + { + /* Set the address bit0 for read */ + Address |= OAR1_ADD0_Set; + } + else + { + /* Reset the address bit0 for write */ + Address &= OAR1_ADD0_Reset; + } + /* Send the address */ + I2Cx->DR = Address; +} + +/** + * @brief Reads the specified I2C register and returns its value. + * @param I2C_Register: specifies the register to read. + * This parameter can be one of the following values: + * @arg I2C_Register_CR1: CR1 register. + * @arg I2C_Register_CR2: CR2 register. + * @arg I2C_Register_OAR1: OAR1 register. + * @arg I2C_Register_OAR2: OAR2 register. + * @arg I2C_Register_DR: DR register. + * @arg I2C_Register_SR1: SR1 register. + * @arg I2C_Register_SR2: SR2 register. + * @arg I2C_Register_CCR: CCR register. + * @arg I2C_Register_TRISE: TRISE register. + * @retval The value of the read register. + */ +uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_REGISTER(I2C_Register)); + + tmp = (uint32_t) I2Cx; + tmp += I2C_Register; + + /* Return the selected register value */ + return (*(__IO uint16_t *) tmp); +} + +/** + * @brief Enables or disables the specified I2C software reset. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C software reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Peripheral under reset */ + I2Cx->CR1 |= CR1_SWRST_Set; + } + else + { + /* Peripheral not under reset */ + I2Cx->CR1 &= CR1_SWRST_Reset; + } +} + +/** + * @brief Selects the specified I2C NACK position in master receiver mode. + * This function is useful in I2C Master Receiver mode when the number + * of data to be received is equal to 2. In this case, this function + * should be called (with parameter I2C_NACKPosition_Next) before data + * reception starts,as described in the 2-byte reception procedure + * recommended in Reference Manual in Section: Master receiver. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_NACKPosition: specifies the NACK position. + * This parameter can be one of the following values: + * @arg I2C_NACKPosition_Next: indicates that the next byte will be the last + * received byte. + * @arg I2C_NACKPosition_Current: indicates that current byte is the last + * received byte. + * + * @note This function configures the same bit (POS) as I2C_PECPositionConfig() + * but is intended to be used in I2C mode while I2C_PECPositionConfig() + * is intended to used in SMBUS mode. + * + * @retval None + */ +void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_NACK_POSITION(I2C_NACKPosition)); + + /* Check the input parameter */ + if (I2C_NACKPosition == I2C_NACKPosition_Next) + { + /* Next byte in shift register is the last received byte */ + I2Cx->CR1 |= I2C_NACKPosition_Next; + } + else + { + /* Current byte in shift register is the last received byte */ + I2Cx->CR1 &= I2C_NACKPosition_Current; + } +} + +/** + * @brief Drives the SMBusAlert pin high or low for the specified I2C. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_SMBusAlert: specifies SMBAlert pin level. + * This parameter can be one of the following values: + * @arg I2C_SMBusAlert_Low: SMBAlert pin driven low + * @arg I2C_SMBusAlert_High: SMBAlert pin driven high + * @retval None + */ +void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert)); + if (I2C_SMBusAlert == I2C_SMBusAlert_Low) + { + /* Drive the SMBusAlert pin Low */ + I2Cx->CR1 |= I2C_SMBusAlert_Low; + } + else + { + /* Drive the SMBusAlert pin High */ + I2Cx->CR1 &= I2C_SMBusAlert_High; + } +} + +/** + * @brief Enables or disables the specified I2C PEC transfer. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2C PEC transmission. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C PEC transmission */ + I2Cx->CR1 |= CR1_PEC_Set; + } + else + { + /* Disable the selected I2C PEC transmission */ + I2Cx->CR1 &= CR1_PEC_Reset; + } +} + +/** + * @brief Selects the specified I2C PEC position. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_PECPosition: specifies the PEC position. + * This parameter can be one of the following values: + * @arg I2C_PECPosition_Next: indicates that the next byte is PEC + * @arg I2C_PECPosition_Current: indicates that current byte is PEC + * + * @note This function configures the same bit (POS) as I2C_NACKPositionConfig() + * but is intended to be used in SMBUS mode while I2C_NACKPositionConfig() + * is intended to used in I2C mode. + * + * @retval None + */ +void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition)); + if (I2C_PECPosition == I2C_PECPosition_Next) + { + /* Next byte in shift register is PEC */ + I2Cx->CR1 |= I2C_PECPosition_Next; + } + else + { + /* Current byte in shift register is PEC */ + I2Cx->CR1 &= I2C_PECPosition_Current; + } +} + +/** + * @brief Enables or disables the PEC value calculation of the transferred bytes. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx PEC value calculation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C PEC calculation */ + I2Cx->CR1 |= CR1_ENPEC_Set; + } + else + { + /* Disable the selected I2C PEC calculation */ + I2Cx->CR1 &= CR1_ENPEC_Reset; + } +} + +/** + * @brief Returns the PEC value for the specified I2C. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @retval The PEC value. + */ +uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + /* Return the selected I2C PEC value */ + return ((I2Cx->SR2) >> 8); +} + +/** + * @brief Enables or disables the specified I2C ARP. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx ARP. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected I2C ARP */ + I2Cx->CR1 |= CR1_ENARP_Set; + } + else + { + /* Disable the selected I2C ARP */ + I2Cx->CR1 &= CR1_ENARP_Reset; + } +} + +/** + * @brief Enables or disables the specified I2C Clock stretching. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param NewState: new state of the I2Cx Clock stretching. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState == DISABLE) + { + /* Enable the selected I2C Clock stretching */ + I2Cx->CR1 |= CR1_NOSTRETCH_Set; + } + else + { + /* Disable the selected I2C Clock stretching */ + I2Cx->CR1 &= CR1_NOSTRETCH_Reset; + } +} + +/** + * @brief Selects the specified I2C fast mode duty cycle. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_DutyCycle: specifies the fast mode duty cycle. + * This parameter can be one of the following values: + * @arg I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2 + * @arg I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9 + * @retval None + */ +void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle)); + if (I2C_DutyCycle != I2C_DutyCycle_16_9) + { + /* I2C fast mode Tlow/Thigh=2 */ + I2Cx->CCR &= I2C_DutyCycle_2; + } + else + { + /* I2C fast mode Tlow/Thigh=16/9 */ + I2Cx->CCR |= I2C_DutyCycle_16_9; + } +} + + + +/** + * @brief + **************************************************************************************** + * + * I2C State Monitoring Functions + * + **************************************************************************************** + * This I2C driver provides three different ways for I2C state monitoring + * depending on the application requirements and constraints: + * + * + * 1) Basic state monitoring: + * Using I2C_CheckEvent() function: + * It compares the status registers (SR1 and SR2) content to a given event + * (can be the combination of one or more flags). + * It returns SUCCESS if the current status includes the given flags + * and returns ERROR if one or more flags are missing in the current status. + * - When to use: + * - This function is suitable for most applications as well as for startup + * activity since the events are fully described in the product reference manual + * (RM0008). + * - It is also suitable for users who need to define their own events. + * - Limitations: + * - If an error occurs (ie. error flags are set besides to the monitored flags), + * the I2C_CheckEvent() function may return SUCCESS despite the communication + * hold or corrupted real state. + * In this case, it is advised to use error interrupts to monitor the error + * events and handle them in the interrupt IRQ handler. + * + * @note + * For error management, it is advised to use the following functions: + * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR). + * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs. + * Where x is the peripheral instance (I2C1, I2C2 ...) + * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler() + * in order to determine which error occured. + * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd() + * and/or I2C_GenerateStop() in order to clear the error flag and source, + * and return to correct communication status. + * + * + * 2) Advanced state monitoring: + * Using the function I2C_GetLastEvent() which returns the image of both status + * registers in a single word (uint32_t) (Status Register 2 value is shifted left + * by 16 bits and concatenated to Status Register 1). + * - When to use: + * - This function is suitable for the same applications above but it allows to + * overcome the mentioned limitation of I2C_GetFlagStatus() function. + * The returned value could be compared to events already defined in the + * library (stm32f10x_i2c.h) or to custom values defined by user. + * - This function is suitable when multiple flags are monitored at the same time. + * - At the opposite of I2C_CheckEvent() function, this function allows user to + * choose when an event is accepted (when all events flags are set and no + * other flags are set or just when the needed flags are set like + * I2C_CheckEvent() function). + * - Limitations: + * - User may need to define his own events. + * - Same remark concerning the error management is applicable for this + * function if user decides to check only regular communication flags (and + * ignores error flags). + * + * + * 3) Flag-based state monitoring: + * Using the function I2C_GetFlagStatus() which simply returns the status of + * one single flag (ie. I2C_FLAG_RXNE ...). + * - When to use: + * - This function could be used for specific applications or in debug phase. + * - It is suitable when only one flag checking is needed (most I2C events + * are monitored through multiple flags). + * - Limitations: + * - When calling this function, the Status register is accessed. Some flags are + * cleared when the status register is accessed. So checking the status + * of one Flag, may clear other ones. + * - Function may need to be called twice or more in order to monitor one + * single event. + * + * For detailed description of Events, please refer to section I2C_Events in + * stm32f10x_i2c.h file. + * + */ + +/** + * + * 1) Basic state monitoring + ******************************************************************************* + */ + +/** + * @brief Checks whether the last I2Cx Event is equal to the one passed + * as parameter. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_EVENT: specifies the event to be checked. + * This parameter can be one of the following values: + * @arg I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED : EV1 + * @arg I2C_EVENT_SLAVE_BYTE_RECEIVED : EV2 + * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF) : EV2 + * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL) : EV2 + * @arg I2C_EVENT_SLAVE_BYTE_TRANSMITTED : EV3 + * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF) : EV3 + * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL) : EV3 + * @arg I2C_EVENT_SLAVE_ACK_FAILURE : EV3_2 + * @arg I2C_EVENT_SLAVE_STOP_DETECTED : EV4 + * @arg I2C_EVENT_MASTER_MODE_SELECT : EV5 + * @arg I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED : EV6 + * @arg I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED : EV6 + * @arg I2C_EVENT_MASTER_BYTE_RECEIVED : EV7 + * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTING : EV8 + * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTED : EV8_2 + * @arg I2C_EVENT_MASTER_MODE_ADDRESS10 : EV9 + * + * @note: For detailed description of Events, please refer to section + * I2C_Events in stm32f10x_i2c.h file. + * + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Last event is equal to the I2C_EVENT + * - ERROR: Last event is different from the I2C_EVENT + */ +ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT) +{ + uint32_t lastevent = 0; + uint32_t flag1 = 0, flag2 = 0; + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_EVENT(I2C_EVENT)); + + /* Read the I2Cx status register */ + flag1 = I2Cx->SR1; + flag2 = I2Cx->SR2; + flag2 = flag2 << 16; + + /* Get the last event value from I2C status register */ + lastevent = (flag1 | flag2) & FLAG_Mask; + + /* Check whether the last event contains the I2C_EVENT */ + if ((lastevent & I2C_EVENT) == I2C_EVENT) + { + /* SUCCESS: last event is equal to I2C_EVENT */ + status = SUCCESS; + } + else + { + /* ERROR: last event is different from I2C_EVENT */ + status = ERROR; + } + /* Return status */ + return status; +} + +/** + * + * 2) Advanced state monitoring + ******************************************************************************* + */ + +/** + * @brief Returns the last I2Cx Event. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * + * @note: For detailed description of Events, please refer to section + * I2C_Events in stm32f10x_i2c.h file. + * + * @retval The last event + */ +uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx) +{ + uint32_t lastevent = 0; + uint32_t flag1 = 0, flag2 = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + + /* Read the I2Cx status register */ + flag1 = I2Cx->SR1; + flag2 = I2Cx->SR2; + flag2 = flag2 << 16; + + /* Get the last event value from I2C status register */ + lastevent = (flag1 | flag2) & FLAG_Mask; + + /* Return status */ + return lastevent; +} + +/** + * + * 3) Flag-based state monitoring + ******************************************************************************* + */ + +/** + * @brief Checks whether the specified I2C flag is set or not. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2C_FLAG_DUALF: Dual flag (Slave mode) + * @arg I2C_FLAG_SMBHOST: SMBus host header (Slave mode) + * @arg I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode) + * @arg I2C_FLAG_GENCALL: General call header flag (Slave mode) + * @arg I2C_FLAG_TRA: Transmitter/Receiver flag + * @arg I2C_FLAG_BUSY: Bus busy flag + * @arg I2C_FLAG_MSL: Master/Slave flag + * @arg I2C_FLAG_SMBALERT: SMBus Alert flag + * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag + * @arg I2C_FLAG_PECERR: PEC error in reception flag + * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_FLAG_AF: Acknowledge failure flag + * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_FLAG_BERR: Bus error flag + * @arg I2C_FLAG_TXE: Data register empty flag (Transmitter) + * @arg I2C_FLAG_RXNE: Data register not empty (Receiver) flag + * @arg I2C_FLAG_STOPF: Stop detection flag (Slave mode) + * @arg I2C_FLAG_ADD10: 10-bit header sent flag (Master mode) + * @arg I2C_FLAG_BTF: Byte transfer finished flag + * @arg I2C_FLAG_ADDR: Address sent flag (Master mode) "ADSL" + * Address matched flag (Slave mode)"ENDA" + * @arg I2C_FLAG_SB: Start bit flag (Master mode) + * @retval The new state of I2C_FLAG (SET or RESET). + */ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) +{ + FlagStatus bitstatus = RESET; + __IO uint32_t i2creg = 0, i2cxbase = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_GET_FLAG(I2C_FLAG)); + + /* Get the I2Cx peripheral base address */ + i2cxbase = (uint32_t)I2Cx; + + /* Read flag register index */ + i2creg = I2C_FLAG >> 28; + + /* Get bit[23:0] of the flag */ + I2C_FLAG &= FLAG_Mask; + + if(i2creg != 0) + { + /* Get the I2Cx SR1 register address */ + i2cxbase += 0x14; + } + else + { + /* Flag in I2Cx SR2 Register */ + I2C_FLAG = (uint32_t)(I2C_FLAG >> 16); + /* Get the I2Cx SR2 register address */ + i2cxbase += 0x18; + } + + if(((*(__IO uint32_t *)i2cxbase) & I2C_FLAG) != (uint32_t)RESET) + { + /* I2C_FLAG is set */ + bitstatus = SET; + } + else + { + /* I2C_FLAG is reset */ + bitstatus = RESET; + } + + /* Return the I2C_FLAG status */ + return bitstatus; +} + + + +/** + * @brief Clears the I2Cx's pending flags. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg I2C_FLAG_SMBALERT: SMBus Alert flag + * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag + * @arg I2C_FLAG_PECERR: PEC error in reception flag + * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_FLAG_AF: Acknowledge failure flag + * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_FLAG_BERR: Bus error flag + * + * @note + * - STOPF (STOP detection) is cleared by software sequence: a read operation + * to I2C_SR1 register (I2C_GetFlagStatus()) followed by a write operation + * to I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). + * - ADD10 (10-bit header sent) is cleared by software sequence: a read + * operation to I2C_SR1 (I2C_GetFlagStatus()) followed by writing the + * second byte of the address in DR register. + * - BTF (Byte Transfer Finished) is cleared by software sequence: a read + * operation to I2C_SR1 register (I2C_GetFlagStatus()) followed by a + * read/write to I2C_DR register (I2C_SendData()). + * - ADDR (Address sent) is cleared by software sequence: a read operation to + * I2C_SR1 register (I2C_GetFlagStatus()) followed by a read operation to + * I2C_SR2 register ((void)(I2Cx->SR2)). + * - SB (Start Bit) is cleared software sequence: a read operation to I2C_SR1 + * register (I2C_GetFlagStatus()) followed by a write operation to I2C_DR + * register (I2C_SendData()). + * @retval None + */ +void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) +{ + uint32_t flagpos = 0; + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG)); + /* Get the I2C flag position */ + flagpos = I2C_FLAG & FLAG_Mask; + /* Clear the selected I2C flag */ + I2Cx->SR1 = (uint16_t)~flagpos; +} + +/** + * @brief Checks whether the specified I2C interrupt has occurred or not. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_IT: specifies the interrupt source to check. + * This parameter can be one of the following values: + * @arg I2C_IT_SMBALERT: SMBus Alert flag + * @arg I2C_IT_TIMEOUT: Timeout or Tlow error flag + * @arg I2C_IT_PECERR: PEC error in reception flag + * @arg I2C_IT_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_IT_AF: Acknowledge failure flag + * @arg I2C_IT_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_IT_BERR: Bus error flag + * @arg I2C_IT_TXE: Data register empty flag (Transmitter) + * @arg I2C_IT_RXNE: Data register not empty (Receiver) flag + * @arg I2C_IT_STOPF: Stop detection flag (Slave mode) + * @arg I2C_IT_ADD10: 10-bit header sent flag (Master mode) + * @arg I2C_IT_BTF: Byte transfer finished flag + * @arg I2C_IT_ADDR: Address sent flag (Master mode) "ADSL" + * Address matched flag (Slave mode)"ENDAD" + * @arg I2C_IT_SB: Start bit flag (Master mode) + * @retval The new state of I2C_IT (SET or RESET). + */ +ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT) +{ + ITStatus bitstatus = RESET; + uint32_t enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_GET_IT(I2C_IT)); + + /* Check if the interrupt source is enabled or not */ + enablestatus = (uint32_t)(((I2C_IT & ITEN_Mask) >> 16) & (I2Cx->CR2)) ; + + /* Get bit[23:0] of the flag */ + I2C_IT &= FLAG_Mask; + + /* Check the status of the specified I2C flag */ + if (((I2Cx->SR1 & I2C_IT) != (uint32_t)RESET) && enablestatus) + { + /* I2C_IT is set */ + bitstatus = SET; + } + else + { + /* I2C_IT is reset */ + bitstatus = RESET; + } + /* Return the I2C_IT status */ + return bitstatus; +} + +/** + * @brief Clears the I2Cxs interrupt pending bits. + * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. + * @param I2C_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg I2C_IT_SMBALERT: SMBus Alert interrupt + * @arg I2C_IT_TIMEOUT: Timeout or Tlow error interrupt + * @arg I2C_IT_PECERR: PEC error in reception interrupt + * @arg I2C_IT_OVR: Overrun/Underrun interrupt (Slave mode) + * @arg I2C_IT_AF: Acknowledge failure interrupt + * @arg I2C_IT_ARLO: Arbitration lost interrupt (Master mode) + * @arg I2C_IT_BERR: Bus error interrupt + * + * @note + * - STOPF (STOP detection) is cleared by software sequence: a read operation + * to I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to + * I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). + * - ADD10 (10-bit header sent) is cleared by software sequence: a read + * operation to I2C_SR1 (I2C_GetITStatus()) followed by writing the second + * byte of the address in I2C_DR register. + * - BTF (Byte Transfer Finished) is cleared by software sequence: a read + * operation to I2C_SR1 register (I2C_GetITStatus()) followed by a + * read/write to I2C_DR register (I2C_SendData()). + * - ADDR (Address sent) is cleared by software sequence: a read operation to + * I2C_SR1 register (I2C_GetITStatus()) followed by a read operation to + * I2C_SR2 register ((void)(I2Cx->SR2)). + * - SB (Start Bit) is cleared by software sequence: a read operation to + * I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to + * I2C_DR register (I2C_SendData()). + * @retval None + */ +void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT) +{ + uint32_t flagpos = 0; + /* Check the parameters */ + assert_param(IS_I2C_ALL_PERIPH(I2Cx)); + assert_param(IS_I2C_CLEAR_IT(I2C_IT)); + /* Get the I2C flag position */ + flagpos = I2C_IT & FLAG_Mask; + /* Clear the selected I2C flag */ + I2Cx->SR1 = (uint16_t)~flagpos; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_iwdg.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_iwdg.c new file mode 100644 index 0000000..c7cbf7e --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_iwdg.c @@ -0,0 +1,190 @@ +/** + ****************************************************************************** + * @file stm32f10x_iwdg.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the IWDG firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_iwdg.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup IWDG + * @brief IWDG driver modules + * @{ + */ + +/** @defgroup IWDG_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Private_Defines + * @{ + */ + +/* ---------------------- IWDG registers bit mask ----------------------------*/ + +/* KR register bit mask */ +#define KR_KEY_Reload ((uint16_t)0xAAAA) +#define KR_KEY_Enable ((uint16_t)0xCCCC) + +/** + * @} + */ + +/** @defgroup IWDG_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup IWDG_Private_Functions + * @{ + */ + +/** + * @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers. + * @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers. + * This parameter can be one of the following values: + * @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers + * @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers + * @retval None + */ +void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess) +{ + /* Check the parameters */ + assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess)); + IWDG->KR = IWDG_WriteAccess; +} + +/** + * @brief Sets IWDG Prescaler value. + * @param IWDG_Prescaler: specifies the IWDG Prescaler value. + * This parameter can be one of the following values: + * @arg IWDG_Prescaler_4: IWDG prescaler set to 4 + * @arg IWDG_Prescaler_8: IWDG prescaler set to 8 + * @arg IWDG_Prescaler_16: IWDG prescaler set to 16 + * @arg IWDG_Prescaler_32: IWDG prescaler set to 32 + * @arg IWDG_Prescaler_64: IWDG prescaler set to 64 + * @arg IWDG_Prescaler_128: IWDG prescaler set to 128 + * @arg IWDG_Prescaler_256: IWDG prescaler set to 256 + * @retval None + */ +void IWDG_SetPrescaler(uint8_t IWDG_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler)); + IWDG->PR = IWDG_Prescaler; +} + +/** + * @brief Sets IWDG Reload value. + * @param Reload: specifies the IWDG Reload value. + * This parameter must be a number between 0 and 0x0FFF. + * @retval None + */ +void IWDG_SetReload(uint16_t Reload) +{ + /* Check the parameters */ + assert_param(IS_IWDG_RELOAD(Reload)); + IWDG->RLR = Reload; +} + +/** + * @brief Reloads IWDG counter with value defined in the reload register + * (write access to IWDG_PR and IWDG_RLR registers disabled). + * @param None + * @retval None + */ +void IWDG_ReloadCounter(void) +{ + IWDG->KR = KR_KEY_Reload; +} + +/** + * @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled). + * @param None + * @retval None + */ +void IWDG_Enable(void) +{ + IWDG->KR = KR_KEY_Enable; +} + +/** + * @brief Checks whether the specified IWDG flag is set or not. + * @param IWDG_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg IWDG_FLAG_PVU: Prescaler Value Update on going + * @arg IWDG_FLAG_RVU: Reload Value Update on going + * @retval The new state of IWDG_FLAG (SET or RESET). + */ +FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_IWDG_FLAG(IWDG_FLAG)); + if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_pwr.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_pwr.c new file mode 100644 index 0000000..a5a5c57 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_pwr.c @@ -0,0 +1,307 @@ +/** + ****************************************************************************** + * @file stm32f10x_pwr.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the PWR firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_pwr.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup PWR + * @brief PWR driver modules + * @{ + */ + +/** @defgroup PWR_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Private_Defines + * @{ + */ + +/* --------- PWR registers bit address in the alias region ---------- */ +#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) + +/* --- CR Register ---*/ + +/* Alias word address of DBP bit */ +#define CR_OFFSET (PWR_OFFSET + 0x00) +#define DBP_BitNumber 0x08 +#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4)) + +/* Alias word address of PVDE bit */ +#define PVDE_BitNumber 0x04 +#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of EWUP bit */ +#define CSR_OFFSET (PWR_OFFSET + 0x04) +#define EWUP_BitNumber 0x08 +#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4)) + +/* ------------------ PWR registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_DS_MASK ((uint32_t)0xFFFFFFFC) +#define CR_PLS_MASK ((uint32_t)0xFFFFFF1F) + + +/** + * @} + */ + +/** @defgroup PWR_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup PWR_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the PWR peripheral registers to their default reset values. + * @param None + * @retval None + */ +void PWR_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE); +} + +/** + * @brief Enables or disables access to the RTC and backup registers. + * @param NewState: new state of the access to the RTC and backup registers. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_BackupAccessCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Power Voltage Detector(PVD). + * @param NewState: new state of the PVD. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_PVDCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). + * @param PWR_PVDLevel: specifies the PVD detection level + * This parameter can be one of the following values: + * @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V + * @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V + * @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V + * @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V + * @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V + * @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V + * @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V + * @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V + * @retval None + */ +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel)); + tmpreg = PWR->CR; + /* Clear PLS[7:5] bits */ + tmpreg &= CR_PLS_MASK; + /* Set PLS[7:5] bits according to PWR_PVDLevel value */ + tmpreg |= PWR_PVDLevel; + /* Store the new value */ + PWR->CR = tmpreg; +} + +/** + * @brief Enables or disables the WakeUp Pin functionality. + * @param NewState: new state of the WakeUp Pin functionality. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void PWR_WakeUpPinCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState; +} + +/** + * @brief Enters STOP mode. + * @param PWR_Regulator: specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_Regulator_ON: STOP mode with regulator ON + * @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode + * @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction + * @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction + * @retval None + */ +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_PWR_REGULATOR(PWR_Regulator)); + assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry)); + + /* Select the regulator state in STOP mode ---------------------------------*/ + tmpreg = PWR->CR; + /* Clear PDDS and LPDS bits */ + tmpreg &= CR_DS_MASK; + /* Set LPDS bit according to PWR_Regulator value */ + tmpreg |= PWR_Regulator; + /* Store the new value */ + PWR->CR = tmpreg; + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP; + + /* Select STOP mode entry --------------------------------------------------*/ + if(PWR_STOPEntry == PWR_STOPEntry_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __WFE(); + } + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP); +} + +/** + * @brief Enters STANDBY mode. + * @param None + * @retval None + */ +void PWR_EnterSTANDBYMode(void) +{ + /* Clear Wake-up flag */ + PWR->CR |= PWR_CR_CWUF; + /* Select STANDBY mode */ + PWR->CR |= PWR_CR_PDDS; + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SCB->SCR |= SCB_SCR_SLEEPDEEP; +/* This option is used to ensure that store operations are completed */ +#if defined ( __CC_ARM ) + __force_stores(); +#endif + /* Request Wait For Interrupt */ + __WFI(); +} + +/** + * @brief Checks whether the specified PWR flag is set or not. + * @param PWR_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + * @arg PWR_FLAG_PVDO: PVD Output + * @retval The new state of PWR_FLAG (SET or RESET). + */ +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_PWR_GET_FLAG(PWR_FLAG)); + + if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the PWR's pending flags. + * @param PWR_FLAG: specifies the flag to clear. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WU: Wake Up flag + * @arg PWR_FLAG_SB: StandBy flag + * @retval None + */ +void PWR_ClearFlag(uint32_t PWR_FLAG) +{ + /* Check the parameters */ + assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG)); + + PWR->CR |= PWR_FLAG << 2; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_rcc.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_rcc.c new file mode 100644 index 0000000..a29034b --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_rcc.c @@ -0,0 +1,1470 @@ +/** + ****************************************************************************** + * @file stm32f10x_rcc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the RCC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup RCC + * @brief RCC driver modules + * @{ + */ + +/** @defgroup RCC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Defines + * @{ + */ + +/* ------------ RCC registers bit address in the alias region ----------- */ +#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) + +/* --- CR Register ---*/ + +/* Alias word address of HSION bit */ +#define CR_OFFSET (RCC_OFFSET + 0x00) +#define HSION_BitNumber 0x00 +#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4)) + +/* Alias word address of PLLON bit */ +#define PLLON_BitNumber 0x18 +#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4)) + +#ifdef STM32F10X_CL + /* Alias word address of PLL2ON bit */ + #define PLL2ON_BitNumber 0x1A + #define CR_PLL2ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL2ON_BitNumber * 4)) + + /* Alias word address of PLL3ON bit */ + #define PLL3ON_BitNumber 0x1C + #define CR_PLL3ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL3ON_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* Alias word address of CSSON bit */ +#define CSSON_BitNumber 0x13 +#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4)) + +/* --- CFGR Register ---*/ + +/* Alias word address of USBPRE bit */ +#define CFGR_OFFSET (RCC_OFFSET + 0x04) + +#ifndef STM32F10X_CL + #define USBPRE_BitNumber 0x16 + #define CFGR_USBPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4)) +#else + #define OTGFSPRE_BitNumber 0x16 + #define CFGR_OTGFSPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (OTGFSPRE_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* --- BDCR Register ---*/ + +/* Alias word address of RTCEN bit */ +#define BDCR_OFFSET (RCC_OFFSET + 0x20) +#define RTCEN_BitNumber 0x0F +#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4)) + +/* Alias word address of BDRST bit */ +#define BDRST_BitNumber 0x10 +#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4)) + +/* --- CSR Register ---*/ + +/* Alias word address of LSION bit */ +#define CSR_OFFSET (RCC_OFFSET + 0x24) +#define LSION_BitNumber 0x00 +#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4)) + +#ifdef STM32F10X_CL +/* --- CFGR2 Register ---*/ + + /* Alias word address of I2S2SRC bit */ + #define CFGR2_OFFSET (RCC_OFFSET + 0x2C) + #define I2S2SRC_BitNumber 0x11 + #define CFGR2_I2S2SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S2SRC_BitNumber * 4)) + + /* Alias word address of I2S3SRC bit */ + #define I2S3SRC_BitNumber 0x12 + #define CFGR2_I2S3SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S3SRC_BitNumber * 4)) +#endif /* STM32F10X_CL */ + +/* ---------------------- RCC registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_HSEBYP_Reset ((uint32_t)0xFFFBFFFF) +#define CR_HSEBYP_Set ((uint32_t)0x00040000) +#define CR_HSEON_Reset ((uint32_t)0xFFFEFFFF) +#define CR_HSEON_Set ((uint32_t)0x00010000) +#define CR_HSITRIM_Mask ((uint32_t)0xFFFFFF07) + +/* CFGR register bit mask */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) + #define CFGR_PLL_Mask ((uint32_t)0xFFC2FFFF) +#else + #define CFGR_PLL_Mask ((uint32_t)0xFFC0FFFF) +#endif /* STM32F10X_CL */ + +#define CFGR_PLLMull_Mask ((uint32_t)0x003C0000) +#define CFGR_PLLSRC_Mask ((uint32_t)0x00010000) +#define CFGR_PLLXTPRE_Mask ((uint32_t)0x00020000) +#define CFGR_SWS_Mask ((uint32_t)0x0000000C) +#define CFGR_SW_Mask ((uint32_t)0xFFFFFFFC) +#define CFGR_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F) +#define CFGR_HPRE_Set_Mask ((uint32_t)0x000000F0) +#define CFGR_PPRE1_Reset_Mask ((uint32_t)0xFFFFF8FF) +#define CFGR_PPRE1_Set_Mask ((uint32_t)0x00000700) +#define CFGR_PPRE2_Reset_Mask ((uint32_t)0xFFFFC7FF) +#define CFGR_PPRE2_Set_Mask ((uint32_t)0x00003800) +#define CFGR_ADCPRE_Reset_Mask ((uint32_t)0xFFFF3FFF) +#define CFGR_ADCPRE_Set_Mask ((uint32_t)0x0000C000) + +/* CSR register bit mask */ +#define CSR_RMVF_Set ((uint32_t)0x01000000) + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) +/* CFGR2 register bit mask */ + #define CFGR2_PREDIV1SRC ((uint32_t)0x00010000) + #define CFGR2_PREDIV1 ((uint32_t)0x0000000F) +#endif +#ifdef STM32F10X_CL + #define CFGR2_PREDIV2 ((uint32_t)0x000000F0) + #define CFGR2_PLL2MUL ((uint32_t)0x00000F00) + #define CFGR2_PLL3MUL ((uint32_t)0x0000F000) +#endif /* STM32F10X_CL */ + +/* RCC Flag Mask */ +#define FLAG_Mask ((uint8_t)0x1F) + +/* CIR register byte 2 (Bits[15:8]) base address */ +#define CIR_BYTE2_ADDRESS ((uint32_t)0x40021009) + +/* CIR register byte 3 (Bits[23:16]) base address */ +#define CIR_BYTE3_ADDRESS ((uint32_t)0x4002100A) + +/* CFGR register byte 4 (Bits[31:24]) base address */ +#define CFGR_BYTE4_ADDRESS ((uint32_t)0x40021007) + +/* BDCR register base address */ +#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET) + +/** + * @} + */ + +/** @defgroup RCC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Variables + * @{ + */ + +static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; +static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8}; + +/** + * @} + */ + +/** @defgroup RCC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup RCC_Private_Functions + * @{ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @param None + * @retval None + */ +void RCC_DeInit(void) +{ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ +#ifndef STM32F10X_CL + RCC->CFGR &= (uint32_t)0xF8FF0000; +#else + RCC->CFGR &= (uint32_t)0xF0FF0000; +#endif /* STM32F10X_CL */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + +#ifdef STM32F10X_CL + /* Reset PLL2ON and PLL3ON bits */ + RCC->CR &= (uint32_t)0xEBFFFFFF; + + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x00FF0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#else + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; +#endif /* STM32F10X_CL */ + +} + +/** + * @brief Configures the External High Speed oscillator (HSE). + * @note HSE can not be stopped if it is used directly or through the PLL as system clock. + * @param RCC_HSE: specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg RCC_HSE_OFF: HSE oscillator OFF + * @arg RCC_HSE_ON: HSE oscillator ON + * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock + * @retval None + */ +void RCC_HSEConfig(uint32_t RCC_HSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_HSE)); + /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/ + /* Reset HSEON bit */ + RCC->CR &= CR_HSEON_Reset; + /* Reset HSEBYP bit */ + RCC->CR &= CR_HSEBYP_Reset; + /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */ + switch(RCC_HSE) + { + case RCC_HSE_ON: + /* Set HSEON bit */ + RCC->CR |= CR_HSEON_Set; + break; + + case RCC_HSE_Bypass: + /* Set HSEBYP and HSEON bits */ + RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set; + break; + + default: + break; + } +} + +/** + * @brief Waits for HSE start-up. + * @param None + * @retval An ErrorStatus enumuration value: + * - SUCCESS: HSE oscillator is stable and ready to use + * - ERROR: HSE oscillator not yet ready + */ +ErrorStatus RCC_WaitForHSEStartUp(void) +{ + __IO uint32_t StartUpCounter = 0; + ErrorStatus status = ERROR; + FlagStatus HSEStatus = RESET; + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); + StartUpCounter++; + } while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET)); + + if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) + { + status = SUCCESS; + } + else + { + status = ERROR; + } + return (status); +} + +/** + * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value. + * @param HSICalibrationValue: specifies the calibration trimming value. + * This parameter must be a number between 0 and 0x1F. + * @retval None + */ +void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue)); + tmpreg = RCC->CR; + /* Clear HSITRIM[4:0] bits */ + tmpreg &= CR_HSITRIM_Mask; + /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */ + tmpreg |= (uint32_t)HSICalibrationValue << 3; + /* Store the new value */ + RCC->CR = tmpreg; +} + +/** + * @brief Enables or disables the Internal High Speed oscillator (HSI). + * @note HSI can not be stopped if it is used directly or through the PLL as system clock. + * @param NewState: new state of the HSI. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_HSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the PLL clock source and multiplication factor. + * @note This function must be used only when the PLL is disabled. + * @param RCC_PLLSource: specifies the PLL entry clock source. + * For @b STM32_Connectivity_line_devices or @b STM32_Value_line_devices, + * this parameter can be one of the following values: + * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry + * @arg RCC_PLLSource_PREDIV1: PREDIV1 clock selected as PLL clock entry + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry + * @arg RCC_PLLSource_HSE_Div1: HSE oscillator clock selected as PLL clock entry + * @arg RCC_PLLSource_HSE_Div2: HSE oscillator clock divided by 2 selected as PLL clock entry + * @param RCC_PLLMul: specifies the PLL multiplication factor. + * For @b STM32_Connectivity_line_devices, this parameter can be RCC_PLLMul_x where x:{[4,9], 6_5} + * For @b other_STM32_devices, this parameter can be RCC_PLLMul_x where x:[2,16] + * @retval None + */ +void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); + assert_param(IS_RCC_PLL_MUL(RCC_PLLMul)); + + tmpreg = RCC->CFGR; + /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */ + tmpreg &= CFGR_PLL_Mask; + /* Set the PLL configuration bits */ + tmpreg |= RCC_PLLSource | RCC_PLLMul; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Enables or disables the PLL. + * @note The PLL can not be disabled if it is used as system clock. + * @param NewState: new state of the PLL. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLLCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState; +} + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) +/** + * @brief Configures the PREDIV1 division factor. + * @note + * - This function must be used only when the PLL is disabled. + * - This function applies only to STM32 Connectivity line and Value line + * devices. + * @param RCC_PREDIV1_Source: specifies the PREDIV1 clock source. + * This parameter can be one of the following values: + * @arg RCC_PREDIV1_Source_HSE: HSE selected as PREDIV1 clock + * @arg RCC_PREDIV1_Source_PLL2: PLL2 selected as PREDIV1 clock + * @note + * For @b STM32_Value_line_devices this parameter is always RCC_PREDIV1_Source_HSE + * @param RCC_PREDIV1_Div: specifies the PREDIV1 clock division factor. + * This parameter can be RCC_PREDIV1_Divx where x:[1,16] + * @retval None + */ +void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PREDIV1_SOURCE(RCC_PREDIV1_Source)); + assert_param(IS_RCC_PREDIV1(RCC_PREDIV1_Div)); + + tmpreg = RCC->CFGR2; + /* Clear PREDIV1[3:0] and PREDIV1SRC bits */ + tmpreg &= ~(CFGR2_PREDIV1 | CFGR2_PREDIV1SRC); + /* Set the PREDIV1 clock source and division factor */ + tmpreg |= RCC_PREDIV1_Source | RCC_PREDIV1_Div ; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} +#endif + +#ifdef STM32F10X_CL +/** + * @brief Configures the PREDIV2 division factor. + * @note + * - This function must be used only when both PLL2 and PLL3 are disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PREDIV2_Div: specifies the PREDIV2 clock division factor. + * This parameter can be RCC_PREDIV2_Divx where x:[1,16] + * @retval None + */ +void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PREDIV2(RCC_PREDIV2_Div)); + + tmpreg = RCC->CFGR2; + /* Clear PREDIV2[3:0] bits */ + tmpreg &= ~CFGR2_PREDIV2; + /* Set the PREDIV2 division factor */ + tmpreg |= RCC_PREDIV2_Div; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + +/** + * @brief Configures the PLL2 multiplication factor. + * @note + * - This function must be used only when the PLL2 is disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PLL2Mul: specifies the PLL2 multiplication factor. + * This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20} + * @retval None + */ +void RCC_PLL2Config(uint32_t RCC_PLL2Mul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL2_MUL(RCC_PLL2Mul)); + + tmpreg = RCC->CFGR2; + /* Clear PLL2Mul[3:0] bits */ + tmpreg &= ~CFGR2_PLL2MUL; + /* Set the PLL2 configuration bits */ + tmpreg |= RCC_PLL2Mul; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + + +/** + * @brief Enables or disables the PLL2. + * @note + * - The PLL2 can not be disabled if it is used indirectly as system clock + * (i.e. it is used as PLL clock entry that is used as System clock). + * - This function applies only to STM32 Connectivity line devices. + * @param NewState: new state of the PLL2. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLL2Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CR_PLL2ON_BB = (uint32_t)NewState; +} + + +/** + * @brief Configures the PLL3 multiplication factor. + * @note + * - This function must be used only when the PLL3 is disabled. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_PLL3Mul: specifies the PLL3 multiplication factor. + * This parameter can be RCC_PLL3Mul_x where x:{[8,14], 16, 20} + * @retval None + */ +void RCC_PLL3Config(uint32_t RCC_PLL3Mul) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_RCC_PLL3_MUL(RCC_PLL3Mul)); + + tmpreg = RCC->CFGR2; + /* Clear PLL3Mul[3:0] bits */ + tmpreg &= ~CFGR2_PLL3MUL; + /* Set the PLL3 configuration bits */ + tmpreg |= RCC_PLL3Mul; + /* Store the new value */ + RCC->CFGR2 = tmpreg; +} + + +/** + * @brief Enables or disables the PLL3. + * @note This function applies only to STM32 Connectivity line devices. + * @param NewState: new state of the PLL3. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_PLL3Cmd(FunctionalState NewState) +{ + /* Check the parameters */ + + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_PLL3ON_BB = (uint32_t)NewState; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the system clock (SYSCLK). + * @param RCC_SYSCLKSource: specifies the clock source used as system clock. + * This parameter can be one of the following values: + * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock + * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock + * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock + * @retval None + */ +void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); + tmpreg = RCC->CFGR; + /* Clear SW[1:0] bits */ + tmpreg &= CFGR_SW_Mask; + /* Set SW[1:0] bits according to RCC_SYSCLKSource value */ + tmpreg |= RCC_SYSCLKSource; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Returns the clock source used as system clock. + * @param None + * @retval The clock source used as system clock. The returned value can + * be one of the following: + * - 0x00: HSI used as system clock + * - 0x04: HSE used as system clock + * - 0x08: PLL used as system clock + */ +uint8_t RCC_GetSYSCLKSource(void) +{ + return ((uint8_t)(RCC->CFGR & CFGR_SWS_Mask)); +} + +/** + * @brief Configures the AHB clock (HCLK). + * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from + * the system clock (SYSCLK). + * This parameter can be one of the following values: + * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK + * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2 + * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4 + * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8 + * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16 + * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64 + * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128 + * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256 + * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512 + * @retval None + */ +void RCC_HCLKConfig(uint32_t RCC_SYSCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_HCLK(RCC_SYSCLK)); + tmpreg = RCC->CFGR; + /* Clear HPRE[3:0] bits */ + tmpreg &= CFGR_HPRE_Reset_Mask; + /* Set HPRE[3:0] bits according to RCC_SYSCLK value */ + tmpreg |= RCC_SYSCLK; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the Low Speed APB clock (PCLK1). + * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB1 clock = HCLK + * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16 + * @retval None + */ +void RCC_PCLK1Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + tmpreg = RCC->CFGR; + /* Clear PPRE1[2:0] bits */ + tmpreg &= CFGR_PPRE1_Reset_Mask; + /* Set PPRE1[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Configures the High Speed APB clock (PCLK2). + * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from + * the AHB clock (HCLK). + * This parameter can be one of the following values: + * @arg RCC_HCLK_Div1: APB2 clock = HCLK + * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2 + * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4 + * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8 + * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16 + * @retval None + */ +void RCC_PCLK2Config(uint32_t RCC_HCLK) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_PCLK(RCC_HCLK)); + tmpreg = RCC->CFGR; + /* Clear PPRE2[2:0] bits */ + tmpreg &= CFGR_PPRE2_Reset_Mask; + /* Set PPRE2[2:0] bits according to RCC_HCLK value */ + tmpreg |= RCC_HCLK << 3; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +/** + * @brief Enables or disables the specified RCC interrupts. + * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * + * @param NewState: new state of the specified RCC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_IT(RCC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Perform Byte access to RCC_CIR bits to enable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT; + } + else + { + /* Perform Byte access to RCC_CIR bits to disable the selected interrupts */ + *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT; + } +} + +#ifndef STM32F10X_CL +/** + * @brief Configures the USB clock (USBCLK). + * @param RCC_USBCLKSource: specifies the USB clock source. This clock is + * derived from the PLL output. + * This parameter can be one of the following values: + * @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB + * clock source + * @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source + * @retval None + */ +void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource)); + + *(__IO uint32_t *) CFGR_USBPRE_BB = RCC_USBCLKSource; +} +#else +/** + * @brief Configures the USB OTG FS clock (OTGFSCLK). + * This function applies only to STM32 Connectivity line devices. + * @param RCC_OTGFSCLKSource: specifies the USB OTG FS clock source. + * This clock is derived from the PLL output. + * This parameter can be one of the following values: + * @arg RCC_OTGFSCLKSource_PLLVCO_Div3: PLL VCO clock divided by 2 selected as USB OTG FS clock source + * @arg RCC_OTGFSCLKSource_PLLVCO_Div2: PLL VCO clock divided by 2 selected as USB OTG FS clock source + * @retval None + */ +void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_OTGFSCLK_SOURCE(RCC_OTGFSCLKSource)); + + *(__IO uint32_t *) CFGR_OTGFSPRE_BB = RCC_OTGFSCLKSource; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the ADC clock (ADCCLK). + * @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from + * the APB2 clock (PCLK2). + * This parameter can be one of the following values: + * @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2 + * @arg RCC_PCLK2_Div4: ADC clock = PCLK2/4 + * @arg RCC_PCLK2_Div6: ADC clock = PCLK2/6 + * @arg RCC_PCLK2_Div8: ADC clock = PCLK2/8 + * @retval None + */ +void RCC_ADCCLKConfig(uint32_t RCC_PCLK2) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_RCC_ADCCLK(RCC_PCLK2)); + tmpreg = RCC->CFGR; + /* Clear ADCPRE[1:0] bits */ + tmpreg &= CFGR_ADCPRE_Reset_Mask; + /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */ + tmpreg |= RCC_PCLK2; + /* Store the new value */ + RCC->CFGR = tmpreg; +} + +#ifdef STM32F10X_CL +/** + * @brief Configures the I2S2 clock source(I2S2CLK). + * @note + * - This function must be called before enabling I2S2 APB clock. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_I2S2CLKSource: specifies the I2S2 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2S2CLKSource_SYSCLK: system clock selected as I2S2 clock entry + * @arg RCC_I2S2CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S2 clock entry + * @retval None + */ +void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_I2S2CLK_SOURCE(RCC_I2S2CLKSource)); + + *(__IO uint32_t *) CFGR2_I2S2SRC_BB = RCC_I2S2CLKSource; +} + +/** + * @brief Configures the I2S3 clock source(I2S2CLK). + * @note + * - This function must be called before enabling I2S3 APB clock. + * - This function applies only to STM32 Connectivity line devices. + * @param RCC_I2S3CLKSource: specifies the I2S3 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2S3CLKSource_SYSCLK: system clock selected as I2S3 clock entry + * @arg RCC_I2S3CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S3 clock entry + * @retval None + */ +void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_I2S3CLK_SOURCE(RCC_I2S3CLKSource)); + + *(__IO uint32_t *) CFGR2_I2S3SRC_BB = RCC_I2S3CLKSource; +} +#endif /* STM32F10X_CL */ + +/** + * @brief Configures the External Low Speed oscillator (LSE). + * @param RCC_LSE: specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg RCC_LSE_OFF: LSE oscillator OFF + * @arg RCC_LSE_ON: LSE oscillator ON + * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock + * @retval None + */ +void RCC_LSEConfig(uint8_t RCC_LSE) +{ + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_LSE)); + /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/ + /* Reset LSEON bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; + /* Reset LSEBYP bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; + /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */ + switch(RCC_LSE) + { + case RCC_LSE_ON: + /* Set LSEON bit */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON; + break; + + case RCC_LSE_Bypass: + /* Set LSEBYP and LSEON bits */ + *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON; + break; + + default: + break; + } +} + +/** + * @brief Enables or disables the Internal Low Speed oscillator (LSI). + * @note LSI can not be disabled if the IWDG is running. + * @param NewState: new state of the LSI. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_LSICmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState; +} + +/** + * @brief Configures the RTC clock (RTCCLK). + * @note Once the RTC clock is selected it can't be changed unless the Backup domain is reset. + * @param RCC_RTCCLKSource: specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock + * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock + * @arg RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 selected as RTC clock + * @retval None + */ +void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource) +{ + /* Check the parameters */ + assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); + /* Select the RTC clock source */ + RCC->BDCR |= RCC_RTCCLKSource; +} + +/** + * @brief Enables or disables the RTC clock. + * @note This function must be used only after the RTC clock was selected using the RCC_RTCCLKConfig function. + * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_RTCCLKCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState; +} + +/** + * @brief Returns the frequencies of different on chip clocks. + * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold + * the clocks frequencies. + * @note The result of this function could be not correct when using + * fractional value for HSE crystal. + * @retval None + */ +void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0; + +#ifdef STM32F10X_CL + uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + uint32_t prediv1factor = 0; +#endif + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & CFGR_SWS_Mask; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & CFGR_PLLMull_Mask; + pllsource = RCC->CFGR & CFGR_PLLSRC_Mask; + +#ifndef STM32F10X_CL + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull; + } + else + { + #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE >> 1) * pllmull; + } + else + { + RCC_Clocks->SYSCLK_Frequency = HSE_VALUE * pllmull; + } + #endif + } +#else + pllmull = pllmull >> 18; + + if (pllmull != 0x0D) + { + pllmull += 2; + } + else + { /* PLL multiplication factor = PLL input clock * 6.5 */ + pllmull = 13 / 2; + } + + if (pllsource == 0x00) + {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull; + } + else + {/* PREDIV1 selected as PLL clock entry */ + + /* Get PREDIV1 clock source and division factor */ + prediv1source = RCC->CFGR2 & CFGR2_PREDIV1SRC; + prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; + + if (prediv1source == 0) + { /* HSE oscillator clock selected as PREDIV1 clock entry */ + RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; + } + else + {/* PLL2 clock selected as PREDIV1 clock entry */ + + /* Get PREDIV2 division factor and PLL2 multiplication factor */ + prediv2factor = ((RCC->CFGR2 & CFGR2_PREDIV2) >> 4) + 1; + pll2mull = ((RCC->CFGR2 & CFGR2_PLL2MUL) >> 8 ) + 2; + RCC_Clocks->SYSCLK_Frequency = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; + } + } +#endif /* STM32F10X_CL */ + break; + + default: + RCC_Clocks->SYSCLK_Frequency = HSI_VALUE; + break; + } + + /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/ + /* Get HCLK prescaler */ + tmp = RCC->CFGR & CFGR_HPRE_Set_Mask; + tmp = tmp >> 4; + presc = APBAHBPrescTable[tmp]; + /* HCLK clock frequency */ + RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; + /* Get PCLK1 prescaler */ + tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask; + tmp = tmp >> 8; + presc = APBAHBPrescTable[tmp]; + /* PCLK1 clock frequency */ + RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + /* Get PCLK2 prescaler */ + tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask; + tmp = tmp >> 11; + presc = APBAHBPrescTable[tmp]; + /* PCLK2 clock frequency */ + RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc; + /* Get ADCCLK prescaler */ + tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask; + tmp = tmp >> 14; + presc = ADCPrescTable[tmp]; + /* ADCCLK clock frequency */ + RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc; +} + +/** + * @brief Enables or disables the AHB peripheral clock. + * @param RCC_AHBPeriph: specifies the AHB peripheral to gates its clock. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values: + * @arg RCC_AHBPeriph_DMA1 + * @arg RCC_AHBPeriph_DMA2 + * @arg RCC_AHBPeriph_SRAM + * @arg RCC_AHBPeriph_FLITF + * @arg RCC_AHBPeriph_CRC + * @arg RCC_AHBPeriph_OTG_FS + * @arg RCC_AHBPeriph_ETH_MAC + * @arg RCC_AHBPeriph_ETH_MAC_Tx + * @arg RCC_AHBPeriph_ETH_MAC_Rx + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values: + * @arg RCC_AHBPeriph_DMA1 + * @arg RCC_AHBPeriph_DMA2 + * @arg RCC_AHBPeriph_SRAM + * @arg RCC_AHBPeriph_FLITF + * @arg RCC_AHBPeriph_CRC + * @arg RCC_AHBPeriph_FSMC + * @arg RCC_AHBPeriph_SDIO + * + * @note SRAM and FLITF clock can be disabled only during sleep mode. + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHBENR |= RCC_AHBPeriph; + } + else + { + RCC->AHBENR &= ~RCC_AHBPeriph; + } +} + +/** + * @brief Enables or disables the High Speed APB (APB2) peripheral clock. + * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, + * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, + * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, + * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, + * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, + * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17, + * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB2ENR |= RCC_APB2Periph; + } + else + { + RCC->APB2ENR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Enables or disables the Low Speed APB (APB1) peripheral clock. + * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, + * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, + * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, + * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, + * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, + * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, + * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC, + * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB1ENR |= RCC_APB1Periph; + } + else + { + RCC->APB1ENR &= ~RCC_APB1Periph; + } +} + +#ifdef STM32F10X_CL +/** + * @brief Forces or releases AHB peripheral reset. + * @note This function applies only to STM32 Connectivity line devices. + * @param RCC_AHBPeriph: specifies the AHB peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_AHBPeriph_OTG_FS + * @arg RCC_AHBPeriph_ETH_MAC + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_AHB_PERIPH_RESET(RCC_AHBPeriph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RCC->AHBRSTR |= RCC_AHBPeriph; + } + else + { + RCC->AHBRSTR &= ~RCC_AHBPeriph; + } +} +#endif /* STM32F10X_CL */ + +/** + * @brief Forces or releases High Speed APB (APB2) peripheral reset. + * @param RCC_APB2Periph: specifies the APB2 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, + * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, + * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, + * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, + * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, + * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17, + * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11 + * @param NewState: new state of the specified peripheral reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB2RSTR |= RCC_APB2Periph; + } + else + { + RCC->APB2RSTR &= ~RCC_APB2Periph; + } +} + +/** + * @brief Forces or releases Low Speed APB (APB1) peripheral reset. + * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. + * This parameter can be any combination of the following values: + * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, + * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, + * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, + * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, + * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, + * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, + * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC, + * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14 + * @param NewState: new state of the specified peripheral clock. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + RCC->APB1RSTR |= RCC_APB1Periph; + } + else + { + RCC->APB1RSTR &= ~RCC_APB1Periph; + } +} + +/** + * @brief Forces or releases the Backup domain reset. + * @param NewState: new state of the Backup domain reset. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_BackupResetCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the Clock Security System. + * @param NewState: new state of the Clock Security System.. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RCC_ClockSecuritySystemCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState; +} + +/** + * @brief Selects the clock source to output on MCO pin. + * @param RCC_MCO: specifies the clock source to output. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_MCO_NoClock: No clock selected + * @arg RCC_MCO_SYSCLK: System clock selected + * @arg RCC_MCO_HSI: HSI oscillator clock selected + * @arg RCC_MCO_HSE: HSE oscillator clock selected + * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected + * @arg RCC_MCO_PLL2CLK: PLL2 clock selected + * @arg RCC_MCO_PLL3CLK_Div2: PLL3 clock divided by 2 selected + * @arg RCC_MCO_XT1: External 3-25 MHz oscillator clock selected + * @arg RCC_MCO_PLL3CLK: PLL3 clock selected + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_MCO_NoClock: No clock selected + * @arg RCC_MCO_SYSCLK: System clock selected + * @arg RCC_MCO_HSI: HSI oscillator clock selected + * @arg RCC_MCO_HSE: HSE oscillator clock selected + * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected + * + * @retval None + */ +void RCC_MCOConfig(uint8_t RCC_MCO) +{ + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCO)); + + /* Perform Byte access to MCO bits to select the MCO source */ + *(__IO uint8_t *) CFGR_BYTE4_ADDRESS = RCC_MCO; +} + +/** + * @brief Checks whether the specified RCC flag is set or not. + * @param RCC_FLAG: specifies the flag to check. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_PLLRDY: PLL clock ready + * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready + * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: Software reset + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset + * @arg RCC_FLAG_LPWRRST: Low Power reset + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_PLLRDY: PLL clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: Software reset + * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset + * @arg RCC_FLAG_WWDGRST: Window Watchdog reset + * @arg RCC_FLAG_LPWRRST: Low Power reset + * + * @retval The new state of RCC_FLAG (SET or RESET). + */ +FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG) +{ + uint32_t tmp = 0; + uint32_t statusreg = 0; + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RCC_FLAG(RCC_FLAG)); + + /* Get the RCC register index */ + tmp = RCC_FLAG >> 5; + if (tmp == 1) /* The flag to check is in CR register */ + { + statusreg = RCC->CR; + } + else if (tmp == 2) /* The flag to check is in BDCR register */ + { + statusreg = RCC->BDCR; + } + else /* The flag to check is in CSR register */ + { + statusreg = RCC->CSR; + } + + /* Get the flag position */ + tmp = RCC_FLAG & FLAG_Mask; + if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + /* Return the flag status */ + return bitstatus; +} + +/** + * @brief Clears the RCC reset flags. + * @note The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, + * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST + * @param None + * @retval None + */ +void RCC_ClearFlag(void) +{ + /* Set RMVF bit to clear the reset flags */ + RCC->CSR |= CSR_RMVF_Set; +} + +/** + * @brief Checks whether the specified RCC interrupt has occurred or not. + * @param RCC_IT: specifies the RCC interrupt source to check. + * + * For @b STM32_Connectivity_line_devices, this parameter can be one of the + * following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * For @b other_STM32_devices, this parameter can be one of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * @retval The new state of RCC_IT (SET or RESET). + */ +ITStatus RCC_GetITStatus(uint8_t RCC_IT) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RCC_GET_IT(RCC_IT)); + + /* Check the status of the specified RCC interrupt */ + if ((RCC->CIR & RCC_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + /* Return the RCC_IT status */ + return bitstatus; +} + +/** + * @brief Clears the RCC's interrupt pending bits. + * @param RCC_IT: specifies the interrupt pending bit to clear. + * + * For @b STM32_Connectivity_line_devices, this parameter can be any combination + * of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_CSS: Clock Security System interrupt + * + * For @b other_STM32_devices, this parameter can be any combination of the + * following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_PLLRDY: PLL ready interrupt + * + * @arg RCC_IT_CSS: Clock Security System interrupt + * @retval None + */ +void RCC_ClearITPendingBit(uint8_t RCC_IT) +{ + /* Check the parameters */ + assert_param(IS_RCC_CLEAR_IT(RCC_IT)); + + /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt + pending bits */ + *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_rtc.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_rtc.c new file mode 100644 index 0000000..f05aef5 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_rtc.c @@ -0,0 +1,339 @@ +/** + ****************************************************************************** + * @file stm32f10x_rtc.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the RTC firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_rtc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup RTC + * @brief RTC driver modules + * @{ + */ + +/** @defgroup RTC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup RTC_Private_Defines + * @{ + */ +#define RTC_LSB_MASK ((uint32_t)0x0000FFFF) /*!< RTC LSB Mask */ +#define PRLH_MSB_MASK ((uint32_t)0x000F0000) /*!< RTC Prescaler MSB Mask */ + +/** + * @} + */ + +/** @defgroup RTC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup RTC_Private_Functions + * @{ + */ + +/** + * @brief Enables or disables the specified RTC interrupts. + * @param RTC_IT: specifies the RTC interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_OW: Overflow interrupt + * @arg RTC_IT_ALR: Alarm interrupt + * @arg RTC_IT_SEC: Second interrupt + * @param NewState: new state of the specified RTC interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_RTC_IT(RTC_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + RTC->CRH |= RTC_IT; + } + else + { + RTC->CRH &= (uint16_t)~RTC_IT; + } +} + +/** + * @brief Enters the RTC configuration mode. + * @param None + * @retval None + */ +void RTC_EnterConfigMode(void) +{ + /* Set the CNF flag to enter in the Configuration Mode */ + RTC->CRL |= RTC_CRL_CNF; +} + +/** + * @brief Exits from the RTC configuration mode. + * @param None + * @retval None + */ +void RTC_ExitConfigMode(void) +{ + /* Reset the CNF flag to exit from the Configuration Mode */ + RTC->CRL &= (uint16_t)~((uint16_t)RTC_CRL_CNF); +} + +/** + * @brief Gets the RTC counter value. + * @param None + * @retval RTC counter value. + */ +uint32_t RTC_GetCounter(void) +{ + uint16_t tmp = 0; + tmp = RTC->CNTL; + return (((uint32_t)RTC->CNTH << 16 ) | tmp) ; +} + +/** + * @brief Sets the RTC counter value. + * @param CounterValue: RTC counter new value. + * @retval None + */ +void RTC_SetCounter(uint32_t CounterValue) +{ + RTC_EnterConfigMode(); + /* Set RTC COUNTER MSB word */ + RTC->CNTH = CounterValue >> 16; + /* Set RTC COUNTER LSB word */ + RTC->CNTL = (CounterValue & RTC_LSB_MASK); + RTC_ExitConfigMode(); +} + +/** + * @brief Sets the RTC prescaler value. + * @param PrescalerValue: RTC prescaler new value. + * @retval None + */ +void RTC_SetPrescaler(uint32_t PrescalerValue) +{ + /* Check the parameters */ + assert_param(IS_RTC_PRESCALER(PrescalerValue)); + + RTC_EnterConfigMode(); + /* Set RTC PRESCALER MSB word */ + RTC->PRLH = (PrescalerValue & PRLH_MSB_MASK) >> 16; + /* Set RTC PRESCALER LSB word */ + RTC->PRLL = (PrescalerValue & RTC_LSB_MASK); + RTC_ExitConfigMode(); +} + +/** + * @brief Sets the RTC alarm value. + * @param AlarmValue: RTC alarm new value. + * @retval None + */ +void RTC_SetAlarm(uint32_t AlarmValue) +{ + RTC_EnterConfigMode(); + /* Set the ALARM MSB word */ + RTC->ALRH = AlarmValue >> 16; + /* Set the ALARM LSB word */ + RTC->ALRL = (AlarmValue & RTC_LSB_MASK); + RTC_ExitConfigMode(); +} + +/** + * @brief Gets the RTC divider value. + * @param None + * @retval RTC Divider value. + */ +uint32_t RTC_GetDivider(void) +{ + uint32_t tmp = 0x00; + tmp = ((uint32_t)RTC->DIVH & (uint32_t)0x000F) << 16; + tmp |= RTC->DIVL; + return tmp; +} + +/** + * @brief Waits until last write operation on RTC registers has finished. + * @note This function must be called before any write to RTC registers. + * @param None + * @retval None + */ +void RTC_WaitForLastTask(void) +{ + /* Loop until RTOFF flag is set */ + while ((RTC->CRL & RTC_FLAG_RTOFF) == (uint16_t)RESET) + { + } +} + +/** + * @brief Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL) + * are synchronized with RTC APB clock. + * @note This function must be called before any read operation after an APB reset + * or an APB clock stop. + * @param None + * @retval None + */ +void RTC_WaitForSynchro(void) +{ + /* Clear RSF flag */ + RTC->CRL &= (uint16_t)~RTC_FLAG_RSF; + /* Loop until RSF flag is set */ + while ((RTC->CRL & RTC_FLAG_RSF) == (uint16_t)RESET) + { + } +} + +/** + * @brief Checks whether the specified RTC flag is set or not. + * @param RTC_FLAG: specifies the flag to check. + * This parameter can be one the following values: + * @arg RTC_FLAG_RTOFF: RTC Operation OFF flag + * @arg RTC_FLAG_RSF: Registers Synchronized flag + * @arg RTC_FLAG_OW: Overflow flag + * @arg RTC_FLAG_ALR: Alarm flag + * @arg RTC_FLAG_SEC: Second flag + * @retval The new state of RTC_FLAG (SET or RESET). + */ +FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_RTC_GET_FLAG(RTC_FLAG)); + + if ((RTC->CRL & RTC_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the RTC's pending flags. + * @param RTC_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg RTC_FLAG_RSF: Registers Synchronized flag. This flag is cleared only after + * an APB reset or an APB Clock stop. + * @arg RTC_FLAG_OW: Overflow flag + * @arg RTC_FLAG_ALR: Alarm flag + * @arg RTC_FLAG_SEC: Second flag + * @retval None + */ +void RTC_ClearFlag(uint16_t RTC_FLAG) +{ + /* Check the parameters */ + assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG)); + + /* Clear the corresponding RTC flag */ + RTC->CRL &= (uint16_t)~RTC_FLAG; +} + +/** + * @brief Checks whether the specified RTC interrupt has occurred or not. + * @param RTC_IT: specifies the RTC interrupts sources to check. + * This parameter can be one of the following values: + * @arg RTC_IT_OW: Overflow interrupt + * @arg RTC_IT_ALR: Alarm interrupt + * @arg RTC_IT_SEC: Second interrupt + * @retval The new state of the RTC_IT (SET or RESET). + */ +ITStatus RTC_GetITStatus(uint16_t RTC_IT) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_RTC_GET_IT(RTC_IT)); + + bitstatus = (ITStatus)(RTC->CRL & RTC_IT); + if (((RTC->CRH & RTC_IT) != (uint16_t)RESET) && (bitstatus != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the RTC's interrupt pending bits. + * @param RTC_IT: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg RTC_IT_OW: Overflow interrupt + * @arg RTC_IT_ALR: Alarm interrupt + * @arg RTC_IT_SEC: Second interrupt + * @retval None + */ +void RTC_ClearITPendingBit(uint16_t RTC_IT) +{ + /* Check the parameters */ + assert_param(IS_RTC_IT(RTC_IT)); + + /* Clear the corresponding RTC pending bit */ + RTC->CRL &= (uint16_t)~RTC_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_sdio.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_sdio.c new file mode 100644 index 0000000..bc1719d --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_sdio.c @@ -0,0 +1,799 @@ +/** + ****************************************************************************** + * @file stm32f10x_sdio.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the SDIO firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_sdio.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup SDIO + * @brief SDIO driver modules + * @{ + */ + +/** @defgroup SDIO_Private_TypesDefinitions + * @{ + */ + +/* ------------ SDIO registers bit address in the alias region ----------- */ +#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) + +/* --- CLKCR Register ---*/ + +/* Alias word address of CLKEN bit */ +#define CLKCR_OFFSET (SDIO_OFFSET + 0x04) +#define CLKEN_BitNumber 0x08 +#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4)) + +/* --- CMD Register ---*/ + +/* Alias word address of SDIOSUSPEND bit */ +#define CMD_OFFSET (SDIO_OFFSET + 0x0C) +#define SDIOSUSPEND_BitNumber 0x0B +#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4)) + +/* Alias word address of ENCMDCOMPL bit */ +#define ENCMDCOMPL_BitNumber 0x0C +#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4)) + +/* Alias word address of NIEN bit */ +#define NIEN_BitNumber 0x0D +#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4)) + +/* Alias word address of ATACMD bit */ +#define ATACMD_BitNumber 0x0E +#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4)) + +/* --- DCTRL Register ---*/ + +/* Alias word address of DMAEN bit */ +#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C) +#define DMAEN_BitNumber 0x03 +#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4)) + +/* Alias word address of RWSTART bit */ +#define RWSTART_BitNumber 0x08 +#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4)) + +/* Alias word address of RWSTOP bit */ +#define RWSTOP_BitNumber 0x09 +#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4)) + +/* Alias word address of RWMOD bit */ +#define RWMOD_BitNumber 0x0A +#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4)) + +/* Alias word address of SDIOEN bit */ +#define SDIOEN_BitNumber 0x0B +#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4)) + +/* ---------------------- SDIO registers bit mask ------------------------ */ + +/* --- CLKCR Register ---*/ + +/* CLKCR register clear mask */ +#define CLKCR_CLEAR_MASK ((uint32_t)0xFFFF8100) + +/* --- PWRCTRL Register ---*/ + +/* SDIO PWRCTRL Mask */ +#define PWR_PWRCTRL_MASK ((uint32_t)0xFFFFFFFC) + +/* --- DCTRL Register ---*/ + +/* SDIO DCTRL Clear Mask */ +#define DCTRL_CLEAR_MASK ((uint32_t)0xFFFFFF08) + +/* --- CMD Register ---*/ + +/* CMD Register clear mask */ +#define CMD_CLEAR_MASK ((uint32_t)0xFFFFF800) + +/* SDIO RESP Registers Address */ +#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14)) + +/** + * @} + */ + +/** @defgroup SDIO_Private_Defines + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup SDIO_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the SDIO peripheral registers to their default reset values. + * @param None + * @retval None + */ +void SDIO_DeInit(void) +{ + SDIO->POWER = 0x00000000; + SDIO->CLKCR = 0x00000000; + SDIO->ARG = 0x00000000; + SDIO->CMD = 0x00000000; + SDIO->DTIMER = 0x00000000; + SDIO->DLEN = 0x00000000; + SDIO->DCTRL = 0x00000000; + SDIO->ICR = 0x00C007FF; + SDIO->MASK = 0x00000000; +} + +/** + * @brief Initializes the SDIO peripheral according to the specified + * parameters in the SDIO_InitStruct. + * @param SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure + * that contains the configuration information for the SDIO peripheral. + * @retval None + */ +void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge)); + assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass)); + assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave)); + assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide)); + assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl)); + +/*---------------------------- SDIO CLKCR Configuration ------------------------*/ + /* Get the SDIO CLKCR value */ + tmpreg = SDIO->CLKCR; + + /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */ + tmpreg &= CLKCR_CLEAR_MASK; + + /* Set CLKDIV bits according to SDIO_ClockDiv value */ + /* Set PWRSAV bit according to SDIO_ClockPowerSave value */ + /* Set BYPASS bit according to SDIO_ClockBypass value */ + /* Set WIDBUS bits according to SDIO_BusWide value */ + /* Set NEGEDGE bits according to SDIO_ClockEdge value */ + /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */ + tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv | SDIO_InitStruct->SDIO_ClockPowerSave | + SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide | + SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl); + + /* Write to SDIO CLKCR */ + SDIO->CLKCR = tmpreg; +} + +/** + * @brief Fills each SDIO_InitStruct member with its default value. + * @param SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which + * will be initialized. + * @retval None + */ +void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct) +{ + /* SDIO_InitStruct members default value */ + SDIO_InitStruct->SDIO_ClockDiv = 0x00; + SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising; + SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable; + SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; + SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b; + SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; +} + +/** + * @brief Enables or disables the SDIO Clock. + * @param NewState: new state of the SDIO Clock. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_ClockCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CLKCR_CLKEN_BB = (uint32_t)NewState; +} + +/** + * @brief Sets the power status of the controller. + * @param SDIO_PowerState: new state of the Power state. + * This parameter can be one of the following values: + * @arg SDIO_PowerState_OFF + * @arg SDIO_PowerState_ON + * @retval None + */ +void SDIO_SetPowerState(uint32_t SDIO_PowerState) +{ + /* Check the parameters */ + assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState)); + + SDIO->POWER &= PWR_PWRCTRL_MASK; + SDIO->POWER |= SDIO_PowerState; +} + +/** + * @brief Gets the power status of the controller. + * @param None + * @retval Power status of the controller. The returned value can + * be one of the following: + * - 0x00: Power OFF + * - 0x02: Power UP + * - 0x03: Power ON + */ +uint32_t SDIO_GetPowerState(void) +{ + return (SDIO->POWER & (~PWR_PWRCTRL_MASK)); +} + +/** + * @brief Enables or disables the SDIO interrupts. + * @param SDIO_IT: specifies the SDIO interrupt sources to be enabled or disabled. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @param NewState: new state of the specified SDIO interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SDIO_IT(SDIO_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the SDIO interrupts */ + SDIO->MASK |= SDIO_IT; + } + else + { + /* Disable the SDIO interrupts */ + SDIO->MASK &= ~SDIO_IT; + } +} + +/** + * @brief Enables or disables the SDIO DMA request. + * @param NewState: new state of the selected SDIO DMA request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_DMACmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_DMAEN_BB = (uint32_t)NewState; +} + +/** + * @brief Initializes the SDIO Command according to the specified + * parameters in the SDIO_CmdInitStruct and send the command. + * @param SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef + * structure that contains the configuration information for the SDIO command. + * @retval None + */ +void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex)); + assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response)); + assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait)); + assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM)); + +/*---------------------------- SDIO ARG Configuration ------------------------*/ + /* Set the SDIO Argument value */ + SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument; + +/*---------------------------- SDIO CMD Configuration ------------------------*/ + /* Get the SDIO CMD value */ + tmpreg = SDIO->CMD; + /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */ + tmpreg &= CMD_CLEAR_MASK; + /* Set CMDINDEX bits according to SDIO_CmdIndex value */ + /* Set WAITRESP bits according to SDIO_Response value */ + /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */ + /* Set CPSMEN bits according to SDIO_CPSM value */ + tmpreg |= (uint32_t)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response + | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM; + + /* Write to SDIO CMD */ + SDIO->CMD = tmpreg; +} + +/** + * @brief Fills each SDIO_CmdInitStruct member with its default value. + * @param SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef + * structure which will be initialized. + * @retval None + */ +void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct) +{ + /* SDIO_CmdInitStruct members default value */ + SDIO_CmdInitStruct->SDIO_Argument = 0x00; + SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00; + SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No; + SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No; + SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable; +} + +/** + * @brief Returns command index of last command for which response received. + * @param None + * @retval Returns the command index of the last command response received. + */ +uint8_t SDIO_GetCommandResponse(void) +{ + return (uint8_t)(SDIO->RESPCMD); +} + +/** + * @brief Returns response received from the card for the last command. + * @param SDIO_RESP: Specifies the SDIO response register. + * This parameter can be one of the following values: + * @arg SDIO_RESP1: Response Register 1 + * @arg SDIO_RESP2: Response Register 2 + * @arg SDIO_RESP3: Response Register 3 + * @arg SDIO_RESP4: Response Register 4 + * @retval The Corresponding response register value. + */ +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP) +{ + __IO uint32_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_RESP(SDIO_RESP)); + + tmp = SDIO_RESP_ADDR + SDIO_RESP; + + return (*(__IO uint32_t *) tmp); +} + +/** + * @brief Initializes the SDIO data path according to the specified + * parameters in the SDIO_DataInitStruct. + * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure that + * contains the configuration information for the SDIO command. + * @retval None + */ +void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct) +{ + uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength)); + assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize)); + assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir)); + assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode)); + assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM)); + +/*---------------------------- SDIO DTIMER Configuration ---------------------*/ + /* Set the SDIO Data TimeOut value */ + SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut; + +/*---------------------------- SDIO DLEN Configuration -----------------------*/ + /* Set the SDIO DataLength value */ + SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength; + +/*---------------------------- SDIO DCTRL Configuration ----------------------*/ + /* Get the SDIO DCTRL value */ + tmpreg = SDIO->DCTRL; + /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */ + tmpreg &= DCTRL_CLEAR_MASK; + /* Set DEN bit according to SDIO_DPSM value */ + /* Set DTMODE bit according to SDIO_TransferMode value */ + /* Set DTDIR bit according to SDIO_TransferDir value */ + /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */ + tmpreg |= (uint32_t)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir + | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM; + + /* Write to SDIO DCTRL */ + SDIO->DCTRL = tmpreg; +} + +/** + * @brief Fills each SDIO_DataInitStruct member with its default value. + * @param SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef structure which + * will be initialized. + * @retval None + */ +void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct) +{ + /* SDIO_DataInitStruct members default value */ + SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF; + SDIO_DataInitStruct->SDIO_DataLength = 0x00; + SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b; + SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard; + SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block; + SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable; +} + +/** + * @brief Returns number of remaining data bytes to be transferred. + * @param None + * @retval Number of remaining data bytes to be transferred + */ +uint32_t SDIO_GetDataCounter(void) +{ + return SDIO->DCOUNT; +} + +/** + * @brief Read one data word from Rx FIFO. + * @param None + * @retval Data received + */ +uint32_t SDIO_ReadData(void) +{ + return SDIO->FIFO; +} + +/** + * @brief Write one data word to Tx FIFO. + * @param Data: 32-bit data word to write. + * @retval None + */ +void SDIO_WriteData(uint32_t Data) +{ + SDIO->FIFO = Data; +} + +/** + * @brief Returns the number of words left to be written to or read from FIFO. + * @param None + * @retval Remaining number of words. + */ +uint32_t SDIO_GetFIFOCount(void) +{ + return SDIO->FIFOCNT; +} + +/** + * @brief Starts the SD I/O Read Wait operation. + * @param NewState: new state of the Start SDIO Read Wait operation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_StartSDIOReadWait(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_RWSTART_BB = (uint32_t) NewState; +} + +/** + * @brief Stops the SD I/O Read Wait operation. + * @param NewState: new state of the Stop SDIO Read Wait operation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_StopSDIOReadWait(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_RWSTOP_BB = (uint32_t) NewState; +} + +/** + * @brief Sets one of the two options of inserting read wait interval. + * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode. + * This parameter can be: + * @arg SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK + * @arg SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2 + * @retval None + */ +void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode) +{ + /* Check the parameters */ + assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode)); + + *(__IO uint32_t *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode; +} + +/** + * @brief Enables or disables the SD I/O Mode Operation. + * @param NewState: new state of SDIO specific operation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_SetSDIOOperation(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) DCTRL_SDIOEN_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the SD I/O Mode suspend command sending. + * @param NewState: new state of the SD I/O Mode suspend command. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_SendSDIOSuspendCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_SDIOSUSPEND_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the command completion signal. + * @param NewState: new state of command completion signal. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_CommandCompletionCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_ENCMDCOMPL_BB = (uint32_t)NewState; +} + +/** + * @brief Enables or disables the CE-ATA interrupt. + * @param NewState: new state of CE-ATA interrupt. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_CEATAITCmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)((~((uint32_t)NewState)) & ((uint32_t)0x1)); +} + +/** + * @brief Sends CE-ATA command (CMD61). + * @param NewState: new state of CE-ATA command. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SDIO_SendCEATACmd(FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + *(__IO uint32_t *) CMD_ATACMD_BB = (uint32_t)NewState; +} + +/** + * @brief Checks whether the specified SDIO flag is set or not. + * @param SDIO_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide + * bus mode. + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_CMDACT: Command transfer in progress + * @arg SDIO_FLAG_TXACT: Data transmit in progress + * @arg SDIO_FLAG_RXACT: Data receive in progress + * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full + * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO + * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval The new state of SDIO_FLAG (SET or RESET). + */ +FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG) +{ + FlagStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_SDIO_FLAG(SDIO_FLAG)); + + if ((SDIO->STA & SDIO_FLAG) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the SDIO's pending flags. + * @param SDIO_FLAG: specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDIO_FLAG_CTIMEOUT: Command response timeout + * @arg SDIO_FLAG_DTIMEOUT: Data timeout + * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) + * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide + * bus mode + * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +void SDIO_ClearFlag(uint32_t SDIO_FLAG) +{ + /* Check the parameters */ + assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG)); + + SDIO->ICR = SDIO_FLAG; +} + +/** + * @brief Checks whether the specified SDIO interrupt has occurred or not. + * @param SDIO_IT: specifies the SDIO interrupt source to check. + * This parameter can be one of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt + * @arg SDIO_IT_TXACT: Data transmit in progress interrupt + * @arg SDIO_IT_RXACT: Data receive in progress interrupt + * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt + * @retval The new state of SDIO_IT (SET or RESET). + */ +ITStatus SDIO_GetITStatus(uint32_t SDIO_IT) +{ + ITStatus bitstatus = RESET; + + /* Check the parameters */ + assert_param(IS_SDIO_GET_IT(SDIO_IT)); + if ((SDIO->STA & SDIO_IT) != (uint32_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the SDIO's interrupt pending bits. + * @param SDIO_IT: specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt + * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide + * bus mode interrupt + * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 + * @retval None + */ +void SDIO_ClearITPendingBit(uint32_t SDIO_IT) +{ + /* Check the parameters */ + assert_param(IS_SDIO_CLEAR_IT(SDIO_IT)); + + SDIO->ICR = SDIO_IT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_spi.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_spi.c new file mode 100644 index 0000000..4ec65b2 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_spi.c @@ -0,0 +1,908 @@ +/** + ****************************************************************************** + * @file stm32f10x_spi.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the SPI firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_spi.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup SPI + * @brief SPI driver modules + * @{ + */ + +/** @defgroup SPI_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + + +/** @defgroup SPI_Private_Defines + * @{ + */ + +/* SPI SPE mask */ +#define CR1_SPE_Set ((uint16_t)0x0040) +#define CR1_SPE_Reset ((uint16_t)0xFFBF) + +/* I2S I2SE mask */ +#define I2SCFGR_I2SE_Set ((uint16_t)0x0400) +#define I2SCFGR_I2SE_Reset ((uint16_t)0xFBFF) + +/* SPI CRCNext mask */ +#define CR1_CRCNext_Set ((uint16_t)0x1000) + +/* SPI CRCEN mask */ +#define CR1_CRCEN_Set ((uint16_t)0x2000) +#define CR1_CRCEN_Reset ((uint16_t)0xDFFF) + +/* SPI SSOE mask */ +#define CR2_SSOE_Set ((uint16_t)0x0004) +#define CR2_SSOE_Reset ((uint16_t)0xFFFB) + +/* SPI registers Masks */ +#define CR1_CLEAR_Mask ((uint16_t)0x3040) +#define I2SCFGR_CLEAR_Mask ((uint16_t)0xF040) + +/* SPI or I2S mode selection masks */ +#define SPI_Mode_Select ((uint16_t)0xF7FF) +#define I2S_Mode_Select ((uint16_t)0x0800) + +/* I2S clock source selection masks */ +#define I2S2_CLOCK_SRC ((uint32_t)(0x00020000)) +#define I2S3_CLOCK_SRC ((uint32_t)(0x00040000)) +#define I2S_MUL_MASK ((uint32_t)(0x0000F000)) +#define I2S_DIV_MASK ((uint32_t)(0x000000F0)) + +/** + * @} + */ + +/** @defgroup SPI_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup SPI_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the SPIx peripheral registers to their default + * reset values (Affects also the I2Ss). + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval None + */ +void SPI_I2S_DeInit(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + if (SPIx == SPI1) + { + /* Enable SPI1 reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE); + /* Release SPI1 from reset state */ + RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE); + } + else if (SPIx == SPI2) + { + /* Enable SPI2 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE); + /* Release SPI2 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE); + } + else + { + if (SPIx == SPI3) + { + /* Enable SPI3 reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE); + /* Release SPI3 from reset state */ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE); + } + } +} + +/** + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the SPI_InitStruct. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral. + * @retval None + */ +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct) +{ + uint16_t tmpreg = 0; + + /* check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Check the SPI parameters */ + assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction)); + assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode)); + assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize)); + assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL)); + assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA)); + assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit)); + assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial)); + +/*---------------------------- SPIx CR1 Configuration ------------------------*/ + /* Get the SPIx CR1 value */ + tmpreg = SPIx->CR1; + /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */ + tmpreg &= CR1_CLEAR_Mask; + /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler + master/salve mode, CPOL and CPHA */ + /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */ + /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */ + /* Set LSBFirst bit according to SPI_FirstBit value */ + /* Set BR bits according to SPI_BaudRatePrescaler value */ + /* Set CPOL bit according to SPI_CPOL value */ + /* Set CPHA bit according to SPI_CPHA value */ + tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode | + SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL | + SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS | + SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit); + /* Write to SPIx CR1 */ + SPIx->CR1 = tmpreg; + + /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ + SPIx->I2SCFGR &= SPI_Mode_Select; + +/*---------------------------- SPIx CRCPOLY Configuration --------------------*/ + /* Write to SPIx CRCPOLY */ + SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial; +} + +/** + * @brief Initializes the SPIx peripheral according to the specified + * parameters in the I2S_InitStruct. + * @param SPIx: where x can be 2 or 3 to select the SPI peripheral + * (configured in I2S mode). + * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that + * contains the configuration information for the specified SPI peripheral + * configured in I2S mode. + * @note + * The function calculates the optimal prescaler needed to obtain the most + * accurate audio frequency (depending on the I2S clock source, the PLL values + * and the product configuration). But in case the prescaler value is greater + * than 511, the default value (0x02) will be configured instead. * + * @retval None + */ +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct) +{ + uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1; + uint32_t tmp = 0; + RCC_ClocksTypeDef RCC_Clocks; + uint32_t sourceclock = 0; + + /* Check the I2S parameters */ + assert_param(IS_SPI_23_PERIPH(SPIx)); + assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); + assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); + assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); + assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput)); + assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq)); + assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); + +/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask; + SPIx->I2SPR = 0x0002; + + /* Get the I2SCFGR register value */ + tmpreg = SPIx->I2SCFGR; + + /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ + if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) + { + i2sodd = (uint16_t)0; + i2sdiv = (uint16_t)2; + } + /* If the requested audio frequency is not the default, compute the prescaler */ + else + { + /* Check the frame length (For the Prescaler computing) */ + if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) + { + /* Packet length is 16 bits */ + packetlength = 1; + } + else + { + /* Packet length is 32 bits */ + packetlength = 2; + } + + /* Get the I2S clock source mask depending on the peripheral number */ + if(((uint32_t)SPIx) == SPI2_BASE) + { + /* The mask is relative to I2S2 */ + tmp = I2S2_CLOCK_SRC; + } + else + { + /* The mask is relative to I2S3 */ + tmp = I2S3_CLOCK_SRC; + } + + /* Check the I2S clock source configuration depending on the Device: + Only Connectivity line devices have the PLL3 VCO clock */ +#ifdef STM32F10X_CL + if((RCC->CFGR2 & tmp) != 0) + { + /* Get the configuration bits of RCC PLL3 multiplier */ + tmp = (uint32_t)((RCC->CFGR2 & I2S_MUL_MASK) >> 12); + + /* Get the value of the PLL3 multiplier */ + if((tmp > 5) && (tmp < 15)) + { + /* Multiplier is between 8 and 14 (value 15 is forbidden) */ + tmp += 2; + } + else + { + if (tmp == 15) + { + /* Multiplier is 20 */ + tmp = 20; + } + } + /* Get the PREDIV2 value */ + sourceclock = (uint32_t)(((RCC->CFGR2 & I2S_DIV_MASK) >> 4) + 1); + + /* Calculate the Source Clock frequency based on PLL3 and PREDIV2 values */ + sourceclock = (uint32_t) ((HSE_Value / sourceclock) * tmp * 2); + } + else + { + /* I2S Clock source is System clock: Get System Clock frequency */ + RCC_GetClocksFreq(&RCC_Clocks); + + /* Get the source clock value: based on System Clock value */ + sourceclock = RCC_Clocks.SYSCLK_Frequency; + } +#else /* STM32F10X_HD */ + /* I2S Clock source is System clock: Get System Clock frequency */ + RCC_GetClocksFreq(&RCC_Clocks); + + /* Get the source clock value: based on System Clock value */ + sourceclock = RCC_Clocks.SYSCLK_Frequency; +#endif /* STM32F10X_CL */ + + /* Compute the Real divider depending on the MCLK output state with a floating point */ + if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) + { + /* MCLK output is enabled */ + tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + else + { + /* MCLK output is disabled */ + tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5); + } + + /* Remove the floating point */ + tmp = tmp / 10; + + /* Check the parity of the divider */ + i2sodd = (uint16_t)(tmp & (uint16_t)0x0001); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint16_t)((tmp - i2sodd) / 2); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (uint16_t) (i2sodd << 8); + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2) || (i2sdiv > 0xFF)) + { + /* Set the default values */ + i2sdiv = 2; + i2sodd = 0; + } + + /* Write to SPIx I2SPR register the computed value */ + SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput)); + + /* Configure the I2S with the SPI_InitStruct values */ + tmpreg |= (uint16_t)(I2S_Mode_Select | (uint16_t)(I2S_InitStruct->I2S_Mode | \ + (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \ + (uint16_t)I2S_InitStruct->I2S_CPOL)))); + + /* Write to SPIx I2SCFGR */ + SPIx->I2SCFGR = tmpreg; +} + +/** + * @brief Fills each SPI_InitStruct member with its default value. + * @param SPI_InitStruct : pointer to a SPI_InitTypeDef structure which will be initialized. + * @retval None + */ +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct) +{ +/*--------------- Reset SPI init structure parameters values -----------------*/ + /* Initialize the SPI_Direction member */ + SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex; + /* initialize the SPI_Mode member */ + SPI_InitStruct->SPI_Mode = SPI_Mode_Slave; + /* initialize the SPI_DataSize member */ + SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b; + /* Initialize the SPI_CPOL member */ + SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low; + /* Initialize the SPI_CPHA member */ + SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge; + /* Initialize the SPI_NSS member */ + SPI_InitStruct->SPI_NSS = SPI_NSS_Hard; + /* Initialize the SPI_BaudRatePrescaler member */ + SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; + /* Initialize the SPI_FirstBit member */ + SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB; + /* Initialize the SPI_CRCPolynomial member */ + SPI_InitStruct->SPI_CRCPolynomial = 7; +} + +/** + * @brief Fills each I2S_InitStruct member with its default value. + * @param I2S_InitStruct : pointer to a I2S_InitTypeDef structure which will be initialized. + * @retval None + */ +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct) +{ +/*--------------- Reset I2S init structure parameters values -----------------*/ + /* Initialize the I2S_Mode member */ + I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx; + + /* Initialize the I2S_Standard member */ + I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips; + + /* Initialize the I2S_DataFormat member */ + I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b; + + /* Initialize the I2S_MCLKOutput member */ + I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable; + + /* Initialize the I2S_AudioFreq member */ + I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default; + + /* Initialize the I2S_CPOL member */ + I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low; +} + +/** + * @brief Enables or disables the specified SPI peripheral. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI peripheral */ + SPIx->CR1 |= CR1_SPE_Set; + } + else + { + /* Disable the selected SPI peripheral */ + SPIx->CR1 &= CR1_SPE_Reset; + } +} + +/** + * @brief Enables or disables the specified SPI peripheral (in I2S mode). + * @param SPIx: where x can be 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_23_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI peripheral (in I2S mode) */ + SPIx->I2SCFGR |= I2SCFGR_I2SE_Set; + } + else + { + /* Disable the selected SPI peripheral (in I2S mode) */ + SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset; + } +} + +/** + * @brief Enables or disables the specified SPI/I2S interrupts. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to be enabled or disabled. + * This parameter can be one of the following values: + * @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask + * @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask + * @arg SPI_I2S_IT_ERR: Error interrupt mask + * @param NewState: new state of the specified SPI/I2S interrupt. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState) +{ + uint16_t itpos = 0, itmask = 0 ; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT)); + + /* Get the SPI/I2S IT index */ + itpos = SPI_I2S_IT >> 4; + + /* Set the IT mask */ + itmask = (uint16_t)1 << (uint16_t)itpos; + + if (NewState != DISABLE) + { + /* Enable the selected SPI/I2S interrupt */ + SPIx->CR2 |= itmask; + } + else + { + /* Disable the selected SPI/I2S interrupt */ + SPIx->CR2 &= (uint16_t)~itmask; + } +} + +/** + * @brief Enables or disables the SPIx/I2Sx DMA interface. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request + * @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request + * @param NewState: new state of the selected SPI/I2S DMA transfer request. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq)); + if (NewState != DISABLE) + { + /* Enable the selected SPI/I2S DMA requests */ + SPIx->CR2 |= SPI_I2S_DMAReq; + } + else + { + /* Disable the selected SPI/I2S DMA requests */ + SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq; + } +} + +/** + * @brief Transmits a Data through the SPIx/I2Sx peripheral. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param Data : Data to be transmitted. + * @retval None + */ +void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Write in the DR register the data to be sent */ + SPIx->DR = Data; +} + +/** + * @brief Returns the most recent received data by the SPIx/I2Sx peripheral. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @retval The value of the received data. + */ +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Return the data in the DR register */ + return SPIx->DR; +} + +/** + * @brief Configures internally by software the NSS pin for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_NSSInternalSoft: specifies the SPI NSS internal state. + * This parameter can be one of the following values: + * @arg SPI_NSSInternalSoft_Set: Set NSS pin internally + * @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally + * @retval None + */ +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft)); + if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset) + { + /* Set NSS pin internally by software */ + SPIx->CR1 |= SPI_NSSInternalSoft_Set; + } + else + { + /* Reset NSS pin internally by software */ + SPIx->CR1 &= SPI_NSSInternalSoft_Reset; + } +} + +/** + * @brief Enables or disables the SS output for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx SS output. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI SS output */ + SPIx->CR2 |= CR2_SSOE_Set; + } + else + { + /* Disable the selected SPI SS output */ + SPIx->CR2 &= CR2_SSOE_Reset; + } +} + +/** + * @brief Configures the data size for the selected SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_DataSize: specifies the SPI data size. + * This parameter can be one of the following values: + * @arg SPI_DataSize_16b: Set data frame format to 16bit + * @arg SPI_DataSize_8b: Set data frame format to 8bit + * @retval None + */ +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_DATASIZE(SPI_DataSize)); + /* Clear DFF bit */ + SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b; + /* Set new DFF bit value */ + SPIx->CR1 |= SPI_DataSize; +} + +/** + * @brief Transmit the SPIx CRC value. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval None + */ +void SPI_TransmitCRC(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Enable the selected SPI CRC transmission */ + SPIx->CR1 |= CR1_CRCNext_Set; +} + +/** + * @brief Enables or disables the CRC value calculation of the transferred bytes. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param NewState: new state of the SPIx CRC value calculation. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the selected SPI CRC calculation */ + SPIx->CR1 |= CR1_CRCEN_Set; + } + else + { + /* Disable the selected SPI CRC calculation */ + SPIx->CR1 &= CR1_CRCEN_Reset; + } +} + +/** + * @brief Returns the transmit or the receive CRC register value for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_CRC: specifies the CRC register to be read. + * This parameter can be one of the following values: + * @arg SPI_CRC_Tx: Selects Tx CRC register + * @arg SPI_CRC_Rx: Selects Rx CRC register + * @retval The selected CRC register value.. + */ +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC) +{ + uint16_t crcreg = 0; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_CRC(SPI_CRC)); + if (SPI_CRC != SPI_CRC_Rx) + { + /* Get the Tx CRC register */ + crcreg = SPIx->TXCRCR; + } + else + { + /* Get the Rx CRC register */ + crcreg = SPIx->RXCRCR; + } + /* Return the selected CRC register */ + return crcreg; +} + +/** + * @brief Returns the CRC Polynomial register value for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @retval The CRC Polynomial register value. + */ +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + + /* Return the CRC polynomial register */ + return SPIx->CRCPR; +} + +/** + * @brief Selects the data transfer direction in bi-directional mode for the specified SPI. + * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. + * @param SPI_Direction: specifies the data transfer direction in bi-directional mode. + * This parameter can be one of the following values: + * @arg SPI_Direction_Tx: Selects Tx transmission direction + * @arg SPI_Direction_Rx: Selects Rx receive direction + * @retval None + */ +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_DIRECTION(SPI_Direction)); + if (SPI_Direction == SPI_Direction_Tx) + { + /* Set the Tx only mode */ + SPIx->CR1 |= SPI_Direction_Tx; + } + else + { + /* Set the Rx only mode */ + SPIx->CR1 &= SPI_Direction_Rx; + } +} + +/** + * @brief Checks whether the specified SPI/I2S flag is set or not. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_FLAG: specifies the SPI/I2S flag to check. + * This parameter can be one of the following values: + * @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag. + * @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag. + * @arg SPI_I2S_FLAG_BSY: Busy flag. + * @arg SPI_I2S_FLAG_OVR: Overrun flag. + * @arg SPI_FLAG_MODF: Mode Fault flag. + * @arg SPI_FLAG_CRCERR: CRC Error flag. + * @arg I2S_FLAG_UDR: Underrun Error flag. + * @arg I2S_FLAG_CHSIDE: Channel Side flag. + * @retval The new state of SPI_I2S_FLAG (SET or RESET). + */ +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG)); + /* Check the status of the specified SPI/I2S flag */ + if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET) + { + /* SPI_I2S_FLAG is set */ + bitstatus = SET; + } + else + { + /* SPI_I2S_FLAG is reset */ + bitstatus = RESET; + } + /* Return the SPI_I2S_FLAG status */ + return bitstatus; +} + +/** + * @brief Clears the SPIx CRC Error (CRCERR) flag. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * @param SPI_I2S_FLAG: specifies the SPI flag to clear. + * This function clears only CRCERR flag. + * @note + * - OVR (OverRun error) flag is cleared by software sequence: a read + * operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read + * operation to SPI_SR register (SPI_I2S_GetFlagStatus()). + * - UDR (UnderRun error) flag is cleared by a read operation to + * SPI_SR register (SPI_I2S_GetFlagStatus()). + * - MODF (Mode Fault) flag is cleared by software sequence: a read/write + * operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a + * write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI). + * @retval None + */ +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) +{ + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG)); + + /* Clear the selected SPI CRC Error (CRCERR) flag */ + SPIx->SR = (uint16_t)~SPI_I2S_FLAG; +} + +/** + * @brief Checks whether the specified SPI/I2S interrupt has occurred or not. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * - 2 or 3 in I2S mode + * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt. + * @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt. + * @arg SPI_I2S_IT_OVR: Overrun interrupt. + * @arg SPI_IT_MODF: Mode Fault interrupt. + * @arg SPI_IT_CRCERR: CRC Error interrupt. + * @arg I2S_IT_UDR: Underrun Error interrupt. + * @retval The new state of SPI_I2S_IT (SET or RESET). + */ +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itpos = 0, itmask = 0, enablestatus = 0; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT)); + + /* Get the SPI/I2S IT index */ + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + + /* Get the SPI/I2S IT mask */ + itmask = SPI_I2S_IT >> 4; + + /* Set the IT mask */ + itmask = 0x01 << itmask; + + /* Get the SPI_I2S_IT enable bit status */ + enablestatus = (SPIx->CR2 & itmask) ; + + /* Check the status of the specified SPI/I2S interrupt */ + if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus) + { + /* SPI_I2S_IT is set */ + bitstatus = SET; + } + else + { + /* SPI_I2S_IT is reset */ + bitstatus = RESET; + } + /* Return the SPI_I2S_IT status */ + return bitstatus; +} + +/** + * @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit. + * @param SPIx: where x can be + * - 1, 2 or 3 in SPI mode + * @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear. + * This function clears only CRCERR interrupt pending bit. + * @note + * - OVR (OverRun Error) interrupt pending bit is cleared by software + * sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData()) + * followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()). + * - UDR (UnderRun Error) interrupt pending bit is cleared by a read + * operation to SPI_SR register (SPI_I2S_GetITStatus()). + * - MODF (Mode Fault) interrupt pending bit is cleared by software sequence: + * a read/write operation to SPI_SR register (SPI_I2S_GetITStatus()) + * followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable + * the SPI). + * @retval None + */ +void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) +{ + uint16_t itpos = 0; + /* Check the parameters */ + assert_param(IS_SPI_ALL_PERIPH(SPIx)); + assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT)); + + /* Get the SPI IT index */ + itpos = 0x01 << (SPI_I2S_IT & 0x0F); + + /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */ + SPIx->SR = (uint16_t)~itpos; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_tim.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_tim.c new file mode 100644 index 0000000..bfb4dd1 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_tim.c @@ -0,0 +1,2890 @@ +/** + ****************************************************************************** + * @file stm32f10x_tim.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the TIM firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_tim.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup TIM + * @brief TIM driver modules + * @{ + */ + +/** @defgroup TIM_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Defines + * @{ + */ + +/* ---------------------- TIM registers bit mask ------------------------ */ +#define SMCR_ETR_Mask ((uint16_t)0x00FF) +#define CCMR_Offset ((uint16_t)0x0018) +#define CCER_CCE_Set ((uint16_t)0x0001) +#define CCER_CCNE_Set ((uint16_t)0x0004) + +/** + * @} + */ + +/** @defgroup TIM_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_FunctionPrototypes + * @{ + */ + +static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter); +/** + * @} + */ + +/** @defgroup TIM_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the TIMx peripheral registers to their default reset values. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @retval None + */ +void TIM_DeInit(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + + if (TIMx == TIM1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); + } + else if (TIMx == TIM2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); + } + else if (TIMx == TIM3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); + } + else if (TIMx == TIM4) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); + } + else if (TIMx == TIM5) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE); + } + else if (TIMx == TIM6) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE); + } + else if (TIMx == TIM7) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE); + } + else if (TIMx == TIM8) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE); + } + else if (TIMx == TIM9) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE); + } + else if (TIMx == TIM10) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE); + } + else if (TIMx == TIM11) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE); + } + else if (TIMx == TIM12) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE); + } + else if (TIMx == TIM13) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE); + } + else if (TIMx == TIM14) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE); + } + else if (TIMx == TIM15) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE); + } + else if (TIMx == TIM16) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE); + } + else + { + if (TIMx == TIM17) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE); + } + } +} + +/** + * @brief Initializes the TIMx Time Base Unit peripheral according to + * the specified parameters in the TIM_TimeBaseInitStruct. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef + * structure that contains the configuration information for the + * specified TIM peripheral. + * @retval None + */ +void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) +{ + uint16_t tmpcr1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); + assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); + + tmpcr1 = TIMx->CR1; + + if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)|| + (TIMx == TIM4) || (TIMx == TIM5)) + { + /* Select the Counter Mode */ + tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS))); + tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode; + } + + if((TIMx != TIM6) && (TIMx != TIM7)) + { + /* Set the clock division */ + tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD)); + tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision; + } + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; + + /* Set the Prescaler value */ + TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; + + if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler and the Repetition counter + values immediately */ + TIMx->EGR = TIM_PSCReloadMode_Immediate; +} + +/** + * @brief Initializes the TIMx Channel1 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint16_t)(~(uint16_t)TIM_CCER_CC1E); + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC1M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC1S)); + + /* Select the Output Compare Mode */ + tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1P)); + /* Set the Output Compare Polarity */ + tmpccer |= TIM_OCInitStruct->TIM_OCPolarity; + + /* Set the Output State */ + tmpccer |= TIM_OCInitStruct->TIM_OutputState; + + if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| + (TIMx == TIM16)|| (TIMx == TIM17)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NP)); + /* Set the Output N Polarity */ + tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity; + + /* Reset the Output N State */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NE)); + /* Set the Output N State */ + tmpccer |= TIM_OCInitStruct->TIM_OutputNState; + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1N)); + + /* Set the Output Idle state */ + tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState; + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel2 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select + * the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC2E)); + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC2M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S)); + + /* Select the Output Compare Mode */ + tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2P)); + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4); + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NP)); + /* Set the Output N Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4); + + /* Reset the Output N State */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NE)); + /* Set the Output N State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2N)); + + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2); + /* Set the Output N Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel3 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC3E)); + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC3M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC3S)); + /* Select the Output Compare Mode */ + tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3P)); + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8); + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); + assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + + /* Reset the Output N Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NP)); + /* Set the Output N Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8); + /* Reset the Output N State */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NE)); + + /* Set the Output N State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8); + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3)); + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3N)); + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4); + /* Set the Output N Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIMx Channel4 according to the specified + * parameters in the TIM_OCInitStruct. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); + assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); + /* Disable the Channel 2: Reset the CC4E Bit */ + TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC4E)); + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC4M)); + tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC4S)); + + /* Select the Output Compare Mode */ + tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); + + /* Reset the Output Polarity level */ + tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC4P)); + /* Set the Output Compare Polarity */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12); + + /* Set the Output State */ + tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12); + + if((TIMx == TIM1) || (TIMx == TIM8)) + { + assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); + /* Reset the Output Compare IDLE State */ + tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS4)); + /* Set the Output Idle state */ + tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Initializes the TIM peripheral according to the specified + * parameters in the TIM_ICInitStruct. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel)); + assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter)); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity)); + } + else + { + assert_param(IS_TIM_IC_POLARITY_LITE(TIM_ICInitStruct->TIM_ICPolarity)); + } + if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) + { + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + /* TI1 Configuration */ + TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2) + { + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* TI2 Configuration */ + TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3) + { + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* TI3 Configuration */ + TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else + { + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* TI4 Configuration */ + TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, + TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } +} + +/** + * @brief Configures the TIM peripheral according to the specified + * parameters in the TIM_ICInitStruct to measure an external PWM signal. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure + * that contains the configuration information for the specified TIM peripheral. + * @retval None + */ +void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + uint16_t icoppositepolarity = TIM_ICPolarity_Rising; + uint16_t icoppositeselection = TIM_ICSelection_DirectTI; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Select the Opposite Input Polarity */ + if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising) + { + icoppositepolarity = TIM_ICPolarity_Falling; + } + else + { + icoppositepolarity = TIM_ICPolarity_Rising; + } + /* Select the Opposite Input */ + if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI) + { + icoppositeselection = TIM_ICSelection_IndirectTI; + } + else + { + icoppositeselection = TIM_ICSelection_DirectTI; + } + if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) + { + /* TI1 Configuration */ + TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + /* TI2 Configuration */ + TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } + else + { + /* TI2 Configuration */ + TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, + TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + /* TI1 Configuration */ + TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); + /* Set the Input Capture Prescaler value */ + TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); + } +} + +/** + * @brief Configures the: Break feature, dead time, Lock level, the OSSI, + * the OSSR State and the AOE(automatic output enable). + * @param TIMx: where x can be 1 or 8 to select the TIM + * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @retval None + */ +void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState)); + assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState)); + assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel)); + assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break)); + assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput)); + /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState | + TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime | + TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity | + TIM_BDTRInitStruct->TIM_AutomaticOutput; +} + +/** + * @brief Fills each TIM_TimeBaseInitStruct member with its default value. + * @param TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef + * structure which will be initialized. + * @retval None + */ +void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) +{ + /* Set the default configuration */ + TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF; + TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000; + TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1; + TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up; + TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000; +} + +/** + * @brief Fills each TIM_OCInitStruct member with its default value. + * @param TIM_OCInitStruct : pointer to a TIM_OCInitTypeDef structure which will + * be initialized. + * @retval None + */ +void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct) +{ + /* Set the default configuration */ + TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing; + TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable; + TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable; + TIM_OCInitStruct->TIM_Pulse = 0x0000; + TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High; + TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High; + TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset; + TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset; +} + +/** + * @brief Fills each TIM_ICInitStruct member with its default value. + * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will + * be initialized. + * @retval None + */ +void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct) +{ + /* Set the default configuration */ + TIM_ICInitStruct->TIM_Channel = TIM_Channel_1; + TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising; + TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI; + TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1; + TIM_ICInitStruct->TIM_ICFilter = 0x00; +} + +/** + * @brief Fills each TIM_BDTRInitStruct member with its default value. + * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which + * will be initialized. + * @retval None + */ +void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct) +{ + /* Set the default configuration */ + TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable; + TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable; + TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF; + TIM_BDTRInitStruct->TIM_DeadTime = 0x00; + TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable; + TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low; + TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable; +} + +/** + * @brief Enables or disables the specified TIM peripheral. + * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral. + * @param NewState: new state of the TIMx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the TIM Counter */ + TIMx->CR1 |= TIM_CR1_CEN; + } + else + { + /* Disable the TIM Counter */ + TIMx->CR1 &= (uint16_t)(~((uint16_t)TIM_CR1_CEN)); + } +} + +/** + * @brief Enables or disables the TIM peripheral Main Outputs. + * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral. + * @param NewState: new state of the TIM peripheral Main Outputs. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the TIM Main Output */ + TIMx->BDTR |= TIM_BDTR_MOE; + } + else + { + /* Disable the TIM Main Output */ + TIMx->BDTR &= (uint16_t)(~((uint16_t)TIM_BDTR_MOE)); + } +} + +/** + * @brief Enables or disables the specified TIM interrupts. + * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral. + * @param TIM_IT: specifies the TIM interrupts sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg TIM_IT_Update: TIM update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * @note + * - TIM6 and TIM7 can only generate an update interrupt. + * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, + * TIM_IT_CC2 or TIM_IT_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. + * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @param NewState: new state of the TIM interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_IT(TIM_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Interrupt sources */ + TIMx->DIER |= TIM_IT; + } + else + { + /* Disable the Interrupt sources */ + TIMx->DIER &= (uint16_t)~TIM_IT; + } +} + +/** + * @brief Configures the TIMx event to be generate by software. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_EventSource: specifies the event source. + * This parameter can be one or more of the following values: + * @arg TIM_EventSource_Update: Timer update Event source + * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EventSource_COM: Timer COM event source + * @arg TIM_EventSource_Trigger: Timer Trigger Event source + * @arg TIM_EventSource_Break: Timer Break event source + * @note + * - TIM6 and TIM7 can only generate an update event. + * - TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8. + * @retval None + */ +void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource)); + + /* Set the event sources */ + TIMx->EGR = TIM_EventSource; +} + +/** + * @brief Configures the TIMx's DMA interface. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select + * the TIM peripheral. + * @param TIM_DMABase: DMA Base address. + * This parameter can be one of the following values: + * @arg TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR, + * TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR, + * TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER, + * TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR, + * TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2, + * TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR, + * TIM_DMABase_DCR. + * @param TIM_DMABurstLength: DMA Burst length. + * This parameter can be one value between: + * TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers. + * @retval None + */ +void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_TIM_DMA_BASE(TIM_DMABase)); + assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength)); + /* Set the DMA Base and the DMA Burst Length */ + TIMx->DCR = TIM_DMABase | TIM_DMABurstLength; +} + +/** + * @brief Enables or disables the TIMx's DMA Requests. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 15, 16 or 17 + * to select the TIM peripheral. + * @param TIM_DMASource: specifies the DMA Request sources. + * This parameter can be any combination of the following values: + * @arg TIM_DMA_Update: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_Trigger: TIM Trigger DMA source + * @param NewState: new state of the DMA Request sources. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST9_PERIPH(TIMx)); + assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the DMA sources */ + TIMx->DIER |= TIM_DMASource; + } + else + { + /* Disable the DMA sources */ + TIMx->DIER &= (uint16_t)~TIM_DMASource; + } +} + +/** + * @brief Configures the TIMx internal Clock + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 + * to select the TIM peripheral. + * @retval None + */ +void TIM_InternalClockConfig(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Disable slave mode to clock the prescaler directly with the internal clock */ + TIMx->SMCR &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); +} + +/** + * @brief Configures the TIMx Internal Trigger as External Clock + * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ITRSource: Trigger source. + * This parameter can be one of the following values: + * @param TIM_TS_ITR0: Internal Trigger 0 + * @param TIM_TS_ITR1: Internal Trigger 1 + * @param TIM_TS_ITR2: Internal Trigger 2 + * @param TIM_TS_ITR3: Internal Trigger 3 + * @retval None + */ +void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource)); + /* Select the Internal Trigger */ + TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource); + /* Select the External clock mode1 */ + TIMx->SMCR |= TIM_SlaveMode_External1; +} + +/** + * @brief Configures the TIMx Trigger as External Clock + * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_TIxExternalCLKSource: Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector + * @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1 + * @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2 + * @param TIM_ICPolarity: specifies the TIx Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param ICFilter : specifies the filter value. + * This parameter must be a value between 0x0 and 0xF. + * @retval None + */ +void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, + uint16_t TIM_ICPolarity, uint16_t ICFilter) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_TIXCLK_SOURCE(TIM_TIxExternalCLKSource)); + assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity)); + assert_param(IS_TIM_IC_FILTER(ICFilter)); + /* Configure the Timer Input Clock Source */ + if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2) + { + TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); + } + else + { + TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); + } + /* Select the Trigger source */ + TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource); + /* Select the External clock mode1 */ + TIMx->SMCR |= TIM_SlaveMode_External1; +} + +/** + * @brief Configures the External clock Mode1 + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter) +{ + uint16_t tmpsmcr = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + /* Configure the ETR Clock source */ + TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the SMS Bits */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); + /* Select the External clock mode1 */ + tmpsmcr |= TIM_SlaveMode_External1; + /* Select the Trigger selection : ETRF */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS)); + tmpsmcr |= TIM_TS_ETRF; + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Configures the External clock Mode2 + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, + uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + /* Configure the ETR Clock source */ + TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); + /* Enable the External clock mode2 */ + TIMx->SMCR |= TIM_SMCR_ECE; +} + +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. + * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. + * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. + * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity: The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. + * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. + * @param ExtTRGFilter: External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, + uint16_t ExtTRGFilter) +{ + uint16_t tmpsmcr = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); + assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); + assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); + tmpsmcr = TIMx->SMCR; + /* Reset the ETR Bits */ + tmpsmcr &= SMCR_ETR_Mask; + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8))); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Configures the TIMx Prescaler. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param Prescaler: specifies the Prescaler Register value + * @param TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode + * This parameter can be one of the following values: + * @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event. + * @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediately. + * @retval None + */ +void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode)); + /* Set the Prescaler value */ + TIMx->PSC = Prescaler; + /* Set or reset the UG Bit */ + TIMx->EGR = TIM_PSCReloadMode; +} + +/** + * @brief Specifies the TIMx Counter Mode to be used. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_CounterMode: specifies the Counter Mode to be used + * This parameter can be one of the following values: + * @arg TIM_CounterMode_Up: TIM Up Counting Mode + * @arg TIM_CounterMode_Down: TIM Down Counting Mode + * @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1 + * @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2 + * @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3 + * @retval None + */ +void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode) +{ + uint16_t tmpcr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode)); + tmpcr1 = TIMx->CR1; + /* Reset the CMS and DIR Bits */ + tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS))); + /* Set the Counter Mode */ + tmpcr1 |= TIM_CounterMode; + /* Write to TIMx CR1 register */ + TIMx->CR1 = tmpcr1; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_InputTriggerSource: The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) +{ + uint16_t tmpsmcr = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource)); + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS)); + /* Set the Input Trigger source */ + tmpsmcr |= TIM_InputTriggerSource; + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Configures the TIMx Encoder Interface. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_EncoderMode: specifies the TIMx Encoder Mode. + * This parameter can be one of the following values: + * @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level. + * @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level. + * @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending + * on the level of the other input. + * @param TIM_IC1Polarity: specifies the IC1 Polarity + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Falling: IC Falling edge. + * @arg TIM_ICPolarity_Rising: IC Rising edge. + * @param TIM_IC2Polarity: specifies the IC2 Polarity + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Falling: IC Falling edge. + * @arg TIM_ICPolarity_Rising: IC Rising edge. + * @retval None + */ +void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, + uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity) +{ + uint16_t tmpsmcr = 0; + uint16_t tmpccmr1 = 0; + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST5_PERIPH(TIMx)); + assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode)); + assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity)); + assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity)); + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Set the encoder Mode */ + tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS)); + tmpsmcr |= TIM_EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S))); + tmpccmr1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0; + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCER_CC1P)) & ((uint16_t)~((uint16_t)TIM_CCER_CC2P))); + tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4)); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Forces the TIMx output 1 waveform to active or inactive level. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC1REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF. + * @retval None + */ +void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1M Bits */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1M); + /* Configure The Forced output Mode */ + tmpccmr1 |= TIM_ForcedAction; + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Forces the TIMx output 2 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC2REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF. + * @retval None + */ +void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2M Bits */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2M); + /* Configure The Forced output Mode */ + tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8); + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Forces the TIMx output 3 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC3REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF. + * @retval None + */ +void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC1M Bits */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3M); + /* Configure The Forced output Mode */ + tmpccmr2 |= TIM_ForcedAction; + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Forces the TIMx output 4 waveform to active or inactive level. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. + * This parameter can be one of the following values: + * @arg TIM_ForcedAction_Active: Force active level on OC4REF + * @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF. + * @retval None + */ +void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC2M Bits */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4M); + /* Configure The Forced output Mode */ + tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8); + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Enables or disables TIMx peripheral Preload register on ARR. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param NewState: new state of the TIMx peripheral Preload register + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the ARR Preload Bit */ + TIMx->CR1 |= TIM_CR1_ARPE; + } + else + { + /* Reset the ARR Preload Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_ARPE); + } +} + +/** + * @brief Selects the TIM peripheral Commutation event. + * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral + * @param NewState: new state of the Commutation event. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the COM Bit */ + TIMx->CR2 |= TIM_CR2_CCUS; + } + else + { + /* Reset the COM Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCUS); + } +} + +/** + * @brief Selects the TIMx peripheral Capture Compare DMA source. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select + * the TIM peripheral. + * @param NewState: new state of the Capture Compare DMA source + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST4_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the CCDS Bit */ + TIMx->CR2 |= TIM_CR2_CCDS; + } + else + { + /* Reset the CCDS Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCDS); + } +} + +/** + * @brief Sets or Resets the TIM peripheral Capture Compare Preload Control bit. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8 or 15 + * to select the TIMx peripheral + * @param NewState: new state of the Capture Compare Preload Control bit + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST5_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the CCPC Bit */ + TIMx->CR2 |= TIM_CR2_CCPC; + } + else + { + /* Reset the CCPC Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCPC); + } +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR1. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1PE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr1 |= TIM_OCPreload; + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR2. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select + * the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2PE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8); + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR3. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC3PE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr2 |= TIM_OCPreload; + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Enables or disables the TIMx peripheral Preload register on CCR4. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPreload: new state of the TIMx peripheral Preload register + * This parameter can be one of the following values: + * @arg TIM_OCPreload_Enable + * @arg TIM_OCPreload_Disable + * @retval None + */ +void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC4PE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4PE); + /* Enable or Disable the Output Compare Preload feature */ + tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8); + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx Output Compare 1 Fast feature. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC1FE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr1 |= TIM_OCFast; + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Configures the TIMx Output Compare 2 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select + * the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2FE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr1 |= (uint16_t)(TIM_OCFast << 8); + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Configures the TIMx Output Compare 3 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC3FE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr2 |= TIM_OCFast; + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx Output Compare 4 Fast feature. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCFast_Enable: TIM output compare fast enable + * @arg TIM_OCFast_Disable: TIM output compare fast disable + * @retval None + */ +void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC4FE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4FE); + /* Enable or Disable the Output Compare Fast Bit */ + tmpccmr2 |= (uint16_t)(TIM_OCFast << 8); + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Clears or safeguards the OCREF1 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + + tmpccmr1 = TIMx->CCMR1; + + /* Reset the OC1CE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr1 |= TIM_OCClear; + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Clears or safeguards the OCREF2 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr1 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + tmpccmr1 = TIMx->CCMR1; + /* Reset the OC2CE Bit */ + tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr1 |= (uint16_t)(TIM_OCClear << 8); + /* Write to TIMx CCMR1 register */ + TIMx->CCMR1 = tmpccmr1; +} + +/** + * @brief Clears or safeguards the OCREF3 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC3CE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr2 |= TIM_OCClear; + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Clears or safeguards the OCREF4 signal on an external event + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. + * This parameter can be one of the following values: + * @arg TIM_OCClear_Enable: TIM Output clear enable + * @arg TIM_OCClear_Disable: TIM Output clear disable + * @retval None + */ +void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) +{ + uint16_t tmpccmr2 = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); + tmpccmr2 = TIMx->CCMR2; + /* Reset the OC4CE Bit */ + tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4CE); + /* Enable or Disable the Output Compare Clear Bit */ + tmpccmr2 |= (uint16_t)(TIM_OCClear << 8); + /* Write to TIMx CCMR2 register */ + TIMx->CCMR2 = tmpccmr2; +} + +/** + * @brief Configures the TIMx channel 1 polarity. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC1 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + tmpccer = TIMx->CCER; + /* Set or Reset the CC1P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1P); + tmpccer |= TIM_OCPolarity; + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 1N polarity. + * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC1N Polarity + * This parameter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC1NP Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1NP); + tmpccer |= TIM_OCNPolarity; + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 2 polarity. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC2 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + tmpccer = TIMx->CCER; + /* Set or Reset the CC2P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 4); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 2N polarity. + * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC2N Polarity + * This parameter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC2NP Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2NP); + tmpccer |= (uint16_t)(TIM_OCNPolarity << 4); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 3 polarity. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC3 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + tmpccer = TIMx->CCER; + /* Set or Reset the CC3P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 8); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx Channel 3N polarity. + * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. + * @param TIM_OCNPolarity: specifies the OC3N Polarity + * This parameter can be one of the following values: + * @arg TIM_OCNPolarity_High: Output Compare active high + * @arg TIM_OCNPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) +{ + uint16_t tmpccer = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST1_PERIPH(TIMx)); + assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); + + tmpccer = TIMx->CCER; + /* Set or Reset the CC3NP Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3NP); + tmpccer |= (uint16_t)(TIM_OCNPolarity << 8); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Configures the TIMx channel 4 polarity. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_OCPolarity: specifies the OC4 Polarity + * This parameter can be one of the following values: + * @arg TIM_OCPolarity_High: Output Compare active high + * @arg TIM_OCPolarity_Low: Output Compare active low + * @retval None + */ +void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) +{ + uint16_t tmpccer = 0; + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); + tmpccer = TIMx->CCER; + /* Set or Reset the CC4P Bit */ + tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC4P); + tmpccer |= (uint16_t)(TIM_OCPolarity << 12); + /* Write to TIMx CCER register */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @arg TIM_Channel_4: TIM Channel 4 + * @param TIM_CCx: specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable. + * @retval None + */ +void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx) +{ + uint16_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_CCX(TIM_CCx)); + + tmp = CCER_CCE_Set << TIM_Channel; + + /* Reset the CCxE Bit */ + TIMx->CCER &= (uint16_t)~ tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel); +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @param TIM_CCxN: specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable. + * @retval None + */ +void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN) +{ + uint16_t tmp = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST2_PERIPH(TIMx)); + assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_CCXN(TIM_CCxN)); + + tmp = CCER_CCNE_Set << TIM_Channel; + + /* Reset the CCxNE Bit */ + TIMx->CCER &= (uint16_t) ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel); +} + +/** + * @brief Selects the TIM Output Compare Mode. + * @note This function disables the selected channel before changing the Output + * Compare Mode. + * User has to enable this channel using TIM_CCxCmd and TIM_CCxNCmd functions. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_Channel: specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_Channel_1: TIM Channel 1 + * @arg TIM_Channel_2: TIM Channel 2 + * @arg TIM_Channel_3: TIM Channel 3 + * @arg TIM_Channel_4: TIM Channel 4 + * @param TIM_OCMode: specifies the TIM Output Compare Mode. + * This parameter can be one of the following values: + * @arg TIM_OCMode_Timing + * @arg TIM_OCMode_Active + * @arg TIM_OCMode_Toggle + * @arg TIM_OCMode_PWM1 + * @arg TIM_OCMode_PWM2 + * @arg TIM_ForcedAction_Active + * @arg TIM_ForcedAction_InActive + * @retval None + */ +void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode) +{ + uint32_t tmp = 0; + uint16_t tmp1 = 0; + + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_CHANNEL(TIM_Channel)); + assert_param(IS_TIM_OCM(TIM_OCMode)); + + tmp = (uint32_t) TIMx; + tmp += CCMR_Offset; + + tmp1 = CCER_CCE_Set << (uint16_t)TIM_Channel; + + /* Disable the Channel: Reset the CCxE Bit */ + TIMx->CCER &= (uint16_t) ~tmp1; + + if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3)) + { + tmp += (TIM_Channel>>1); + + /* Reset the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC1M); + + /* Configure the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp |= TIM_OCMode; + } + else + { + tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1; + + /* Reset the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC2M); + + /* Configure the OCxM bits in the CCMRx register */ + *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8); + } +} + +/** + * @brief Enables or Disables the TIMx Update event. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param NewState: new state of the TIMx UDIS bit + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the Update Disable Bit */ + TIMx->CR1 |= TIM_CR1_UDIS; + } + else + { + /* Reset the Update Disable Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_UDIS); + } +} + +/** + * @brief Configures the TIMx Update Request Interrupt source. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_UpdateSource: specifies the Update source. + * This parameter can be one of the following values: + * @arg TIM_UpdateSource_Regular: Source of update is the counter overflow/underflow + or the setting of UG bit, or an update generation + through the slave mode controller. + * @arg TIM_UpdateSource_Global: Source of update is counter overflow/underflow. + * @retval None + */ +void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource)); + if (TIM_UpdateSource != TIM_UpdateSource_Global) + { + /* Set the URS Bit */ + TIMx->CR1 |= TIM_CR1_URS; + } + else + { + /* Reset the URS Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_URS); + } +} + +/** + * @brief Enables or disables the TIMx's Hall sensor interface. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param NewState: new state of the TIMx Hall sensor interface. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Set the TI1S Bit */ + TIMx->CR2 |= TIM_CR2_TI1S; + } + else + { + /* Reset the TI1S Bit */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_TI1S); + } +} + +/** + * @brief Selects the TIMx's One Pulse Mode. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_OPMode: specifies the OPM Mode to be used. + * This parameter can be one of the following values: + * @arg TIM_OPMode_Single + * @arg TIM_OPMode_Repetitive + * @retval None + */ +void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_OPM_MODE(TIM_OPMode)); + /* Reset the OPM Bit */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_OPM); + /* Configure the OPM Mode */ + TIMx->CR1 |= TIM_OPMode; +} + +/** + * @brief Selects the TIMx Trigger Output Mode. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_TRGOSource: specifies the Trigger Output source. + * This paramter can be one of the following values: + * + * - For all TIMx + * @arg TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_Update: The update event is selected as the trigger output (TRGO). + * + * - For all TIMx except TIM6 and TIM7 + * @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag + * is to be set, as soon as a capture or compare match occurs (TRGO). + * @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output (TRGO). + * @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output (TRGO). + * + * @retval None + */ +void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST7_PERIPH(TIMx)); + assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource)); + /* Reset the MMS Bits */ + TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_MMS); + /* Select the TRGO source */ + TIMx->CR2 |= TIM_TRGOSource; +} + +/** + * @brief Selects the TIMx Slave Mode. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_SlaveMode: specifies the Timer Slave Mode. + * This parameter can be one of the following values: + * @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal (TRGI) re-initializes + * the counter and triggers an update of the registers. + * @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high. + * @arg TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI. + * @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter. + * @retval None + */ +void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode)); + /* Reset the SMS Bits */ + TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_SMS); + /* Select the Slave Mode */ + TIMx->SMCR |= TIM_SlaveMode; +} + +/** + * @brief Sets or Resets the TIMx Master/Slave Mode. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode. + * This parameter can be one of the following values: + * @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer + * and its slaves (through TRGO). + * @arg TIM_MasterSlaveMode_Disable: No action + * @retval None + */ +void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode)); + /* Reset the MSM Bit */ + TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_MSM); + + /* Set or Reset the MSM Bit */ + TIMx->SMCR |= TIM_MasterSlaveMode; +} + +/** + * @brief Sets the TIMx Counter Register value + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param Counter: specifies the Counter register new value. + * @retval None + */ +void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + /* Set the Counter Register value */ + TIMx->CNT = Counter; +} + +/** + * @brief Sets the TIMx Autoreload Register value + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param Autoreload: specifies the Autoreload register new value. + * @retval None + */ +void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + /* Set the Autoreload Register value */ + TIMx->ARR = Autoreload; +} + +/** + * @brief Sets the TIMx Capture Compare1 Register value + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param Compare1: specifies the Capture Compare1 register new value. + * @retval None + */ +void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + /* Set the Capture Compare1 Register value */ + TIMx->CCR1 = Compare1; +} + +/** + * @brief Sets the TIMx Capture Compare2 Register value + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param Compare2: specifies the Capture Compare2 register new value. + * @retval None + */ +void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Set the Capture Compare2 Register value */ + TIMx->CCR2 = Compare2; +} + +/** + * @brief Sets the TIMx Capture Compare3 Register value + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param Compare3: specifies the Capture Compare3 register new value. + * @retval None + */ +void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* Set the Capture Compare3 Register value */ + TIMx->CCR3 = Compare3; +} + +/** + * @brief Sets the TIMx Capture Compare4 Register value + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param Compare4: specifies the Capture Compare4 register new value. + * @retval None + */ +void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* Set the Capture Compare4 Register value */ + TIMx->CCR4 = Compare4; +} + +/** + * @brief Sets the TIMx Input Capture 1 prescaler. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture1 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + /* Reset the IC1PSC Bits */ + TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC1PSC); + /* Set the IC1PSC value */ + TIMx->CCMR1 |= TIM_ICPSC; +} + +/** + * @brief Sets the TIMx Input Capture 2 prescaler. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture2 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + /* Reset the IC2PSC Bits */ + TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC2PSC); + /* Set the IC2PSC value */ + TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8); +} + +/** + * @brief Sets the TIMx Input Capture 3 prescaler. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture3 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + /* Reset the IC3PSC Bits */ + TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC3PSC); + /* Set the IC3PSC value */ + TIMx->CCMR2 |= TIM_ICPSC; +} + +/** + * @brief Sets the TIMx Input Capture 4 prescaler. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPSC: specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); + /* Reset the IC4PSC Bits */ + TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC4PSC); + /* Set the IC4PSC value */ + TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8); +} + +/** + * @brief Sets the TIMx Clock Division value. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select + * the TIM peripheral. + * @param TIM_CKD: specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CKD_DIV1: TDTS = Tck_tim + * @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim + * @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim + * @retval None + */ +void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + assert_param(IS_TIM_CKD_DIV(TIM_CKD)); + /* Reset the CKD Bits */ + TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_CKD); + /* Set the CKD value */ + TIMx->CR1 |= TIM_CKD; +} + +/** + * @brief Gets the TIMx Input Capture 1 value. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @retval Capture Compare 1 Register value. + */ +uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST8_PERIPH(TIMx)); + /* Get the Capture 1 Register value */ + return TIMx->CCR1; +} + +/** + * @brief Gets the TIMx Input Capture 2 value. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @retval Capture Compare 2 Register value. + */ +uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST6_PERIPH(TIMx)); + /* Get the Capture 2 Register value */ + return TIMx->CCR2; +} + +/** + * @brief Gets the TIMx Input Capture 3 value. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @retval Capture Compare 3 Register value. + */ +uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* Get the Capture 3 Register value */ + return TIMx->CCR3; +} + +/** + * @brief Gets the TIMx Input Capture 4 value. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @retval Capture Compare 4 Register value. + */ +uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_LIST3_PERIPH(TIMx)); + /* Get the Capture 4 Register value */ + return TIMx->CCR4; +} + +/** + * @brief Gets the TIMx Counter value. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @retval Counter Register value. + */ +uint16_t TIM_GetCounter(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + /* Get the Counter Register value */ + return TIMx->CNT; +} + +/** + * @brief Gets the TIMx Prescaler value. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @retval Prescaler Register value. + */ +uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + /* Get the Prescaler Register value */ + return TIMx->PSC; +} + +/** + * @brief Checks whether the specified TIM flag is set or not. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_Update: TIM update Flag + * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag + * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag + * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag + * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag + * @arg TIM_FLAG_COM: TIM Commutation Flag + * @arg TIM_FLAG_Trigger: TIM Trigger Flag + * @arg TIM_FLAG_Break: TIM Break Flag + * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag + * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag + * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag + * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag + * @note + * - TIM6 and TIM7 can have only one update flag. + * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1, + * TIM_FLAG_CC2 or TIM_FLAG_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1. + * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @retval The new state of TIM_FLAG (SET or RESET). + */ +FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) +{ + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_GET_FLAG(TIM_FLAG)); + + if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the TIMx's pending flags. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_FLAG: specifies the flag bit to clear. + * This parameter can be any combination of the following values: + * @arg TIM_FLAG_Update: TIM update Flag + * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag + * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag + * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag + * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag + * @arg TIM_FLAG_COM: TIM Commutation Flag + * @arg TIM_FLAG_Trigger: TIM Trigger Flag + * @arg TIM_FLAG_Break: TIM Break Flag + * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag + * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag + * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag + * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag + * @note + * - TIM6 and TIM7 can have only one update flag. + * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1, + * TIM_FLAG_CC2 or TIM_FLAG_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1. + * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @retval None + */ +void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_CLEAR_FLAG(TIM_FLAG)); + + /* Clear the flags */ + TIMx->SR = (uint16_t)~TIM_FLAG; +} + +/** + * @brief Checks whether the TIM interrupt has occurred or not. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_IT: specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_Update: TIM update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * @note + * - TIM6 and TIM7 can generate only an update interrupt. + * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, + * TIM_IT_CC2 or TIM_IT_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. + * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @retval The new state of the TIM_IT(SET or RESET). + */ +ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT) +{ + ITStatus bitstatus = RESET; + uint16_t itstatus = 0x0, itenable = 0x0; + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_GET_IT(TIM_IT)); + + itstatus = TIMx->SR & TIM_IT; + + itenable = TIMx->DIER & TIM_IT; + if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the TIMx's interrupt pending bits. + * @param TIMx: where x can be 1 to 17 to select the TIM peripheral. + * @param TIM_IT: specifies the pending bit to clear. + * This parameter can be any combination of the following values: + * @arg TIM_IT_Update: TIM1 update Interrupt source + * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source + * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source + * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source + * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source + * @arg TIM_IT_COM: TIM Commutation Interrupt source + * @arg TIM_IT_Trigger: TIM Trigger Interrupt source + * @arg TIM_IT_Break: TIM Break Interrupt source + * @note + * - TIM6 and TIM7 can generate only an update interrupt. + * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1, + * TIM_IT_CC2 or TIM_IT_Trigger. + * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1. + * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. + * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17. + * @retval None + */ +void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT) +{ + /* Check the parameters */ + assert_param(IS_TIM_ALL_PERIPH(TIMx)); + assert_param(IS_TIM_IT(TIM_IT)); + /* Clear the IT pending Bit */ + TIMx->SR = (uint16_t)~TIM_IT; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr1 = 0, tmpccer = 0; + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC1E); + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + /* Select the Input and set the filter */ + tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC1F))); + tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E); + } + else + { + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P | TIM_CCER_CC1NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E); + } + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0; + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC2E); + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 4); + /* Select the Input and set the filter */ + tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC2S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC2F))); + tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12); + tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC2E); + } + else + { + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P | TIM_CCER_CC2NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC2E); + } + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC3E); + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 8); + /* Select the Input and set the filter */ + tmpccmr2 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR2_CC3S)) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC3F))); + tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC3E); + } + else + { + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC3NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC3E); + } + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. + * @param TIM_ICPolarity : The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPolarity_Rising + * @arg TIM_ICPolarity_Falling + * @param TIM_ICSelection: specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter: Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, + uint16_t TIM_ICFilter) +{ + uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC4E); + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + tmp = (uint16_t)(TIM_ICPolarity << 12); + /* Select the Input and set the filter */ + tmpccmr2 &= (uint16_t)((uint16_t)(~(uint16_t)TIM_CCMR2_CC4S) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC4F))); + tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8); + tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12); + + if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) || + (TIMx == TIM4) ||(TIMx == TIM5)) + { + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC4P)); + tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC4E); + } + else + { + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC4NP)); + tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC4E); + } + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_usart.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_usart.c new file mode 100644 index 0000000..e794eae --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_usart.c @@ -0,0 +1,1058 @@ +/** + ****************************************************************************** + * @file stm32f10x_usart.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the USART firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_usart.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup USART + * @brief USART driver modules + * @{ + */ + +/** @defgroup USART_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Defines + * @{ + */ + +#define CR1_UE_Set ((uint16_t)0x2000) /*!< USART Enable Mask */ +#define CR1_UE_Reset ((uint16_t)0xDFFF) /*!< USART Disable Mask */ + +#define CR1_WAKE_Mask ((uint16_t)0xF7FF) /*!< USART WakeUp Method Mask */ + +#define CR1_RWU_Set ((uint16_t)0x0002) /*!< USART mute mode Enable Mask */ +#define CR1_RWU_Reset ((uint16_t)0xFFFD) /*!< USART mute mode Enable Mask */ +#define CR1_SBK_Set ((uint16_t)0x0001) /*!< USART Break Character send Mask */ +#define CR1_CLEAR_Mask ((uint16_t)0xE9F3) /*!< USART CR1 Mask */ +#define CR2_Address_Mask ((uint16_t)0xFFF0) /*!< USART address Mask */ + +#define CR2_LINEN_Set ((uint16_t)0x4000) /*!< USART LIN Enable Mask */ +#define CR2_LINEN_Reset ((uint16_t)0xBFFF) /*!< USART LIN Disable Mask */ + +#define CR2_LBDL_Mask ((uint16_t)0xFFDF) /*!< USART LIN Break detection Mask */ +#define CR2_STOP_CLEAR_Mask ((uint16_t)0xCFFF) /*!< USART CR2 STOP Bits Mask */ +#define CR2_CLOCK_CLEAR_Mask ((uint16_t)0xF0FF) /*!< USART CR2 Clock Mask */ + +#define CR3_SCEN_Set ((uint16_t)0x0020) /*!< USART SC Enable Mask */ +#define CR3_SCEN_Reset ((uint16_t)0xFFDF) /*!< USART SC Disable Mask */ + +#define CR3_NACK_Set ((uint16_t)0x0010) /*!< USART SC NACK Enable Mask */ +#define CR3_NACK_Reset ((uint16_t)0xFFEF) /*!< USART SC NACK Disable Mask */ + +#define CR3_HDSEL_Set ((uint16_t)0x0008) /*!< USART Half-Duplex Enable Mask */ +#define CR3_HDSEL_Reset ((uint16_t)0xFFF7) /*!< USART Half-Duplex Disable Mask */ + +#define CR3_IRLP_Mask ((uint16_t)0xFFFB) /*!< USART IrDA LowPower mode Mask */ +#define CR3_CLEAR_Mask ((uint16_t)0xFCFF) /*!< USART CR3 Mask */ + +#define CR3_IREN_Set ((uint16_t)0x0002) /*!< USART IrDA Enable Mask */ +#define CR3_IREN_Reset ((uint16_t)0xFFFD) /*!< USART IrDA Disable Mask */ +#define GTPR_LSB_Mask ((uint16_t)0x00FF) /*!< Guard Time Register LSB Mask */ +#define GTPR_MSB_Mask ((uint16_t)0xFF00) /*!< Guard Time Register MSB Mask */ +#define IT_Mask ((uint16_t)0x001F) /*!< USART Interrupt Mask */ + +/* USART OverSampling-8 Mask */ +#define CR1_OVER8_Set ((u16)0x8000) /* USART OVER8 mode Enable Mask */ +#define CR1_OVER8_Reset ((u16)0x7FFF) /* USART OVER8 mode Disable Mask */ + +/* USART One Bit Sampling Mask */ +#define CR3_ONEBITE_Set ((u16)0x0800) /* USART ONEBITE mode Enable Mask */ +#define CR3_ONEBITE_Reset ((u16)0xF7FF) /* USART ONEBITE mode Disable Mask */ + +/** + * @} + */ + +/** @defgroup USART_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the USARTx peripheral registers to their default reset values. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @retval None + */ +void USART_DeInit(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + if (USARTx == USART1) + { + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); + RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); + } + else if (USARTx == USART2) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); + } + else if (USARTx == USART3) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); + } + else if (USARTx == UART4) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); + } + else + { + if (USARTx == UART5) + { + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE); + } + } +} + +/** + * @brief Initializes the USARTx peripheral according to the specified + * parameters in the USART_InitStruct . + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure + * that contains the configuration information for the specified USART + * peripheral. + * @retval None + */ +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) +{ + uint32_t tmpreg = 0x00, apbclock = 0x00; + uint32_t integerdivider = 0x00; + uint32_t fractionaldivider = 0x00; + uint32_t usartxbase = 0; + RCC_ClocksTypeDef RCC_ClocksStatus; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); + assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); + assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); + assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); + assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); + assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); + /* The hardware flow control is available only for USART1, USART2 and USART3 */ + if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + usartxbase = (uint32_t)USARTx; + +/*---------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = USARTx->CR2; + /* Clear STOP[13:12] bits */ + tmpreg &= CR2_STOP_CLEAR_Mask; + /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/ + /* Set STOP[13:12] bits according to USART_StopBits value */ + tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits; + + /* Write to USART CR2 */ + USARTx->CR2 = (uint16_t)tmpreg; + +/*---------------------------- USART CR1 Configuration -----------------------*/ + tmpreg = USARTx->CR1; + /* Clear M, PCE, PS, TE and RE bits */ + tmpreg &= CR1_CLEAR_Mask; + /* Configure the USART Word Length, Parity and mode ----------------------- */ + /* Set the M bits according to USART_WordLength value */ + /* Set PCE and PS bits according to USART_Parity value */ + /* Set TE and RE bits according to USART_Mode value */ + tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | + USART_InitStruct->USART_Mode; + /* Write to USART CR1 */ + USARTx->CR1 = (uint16_t)tmpreg; + +/*---------------------------- USART CR3 Configuration -----------------------*/ + tmpreg = USARTx->CR3; + /* Clear CTSE and RTSE bits */ + tmpreg &= CR3_CLEAR_Mask; + /* Configure the USART HFC -------------------------------------------------*/ + /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ + tmpreg |= USART_InitStruct->USART_HardwareFlowControl; + /* Write to USART CR3 */ + USARTx->CR3 = (uint16_t)tmpreg; + +/*---------------------------- USART BRR Configuration -----------------------*/ + /* Configure the USART Baud Rate -------------------------------------------*/ + RCC_GetClocksFreq(&RCC_ClocksStatus); + if (usartxbase == USART1_BASE) + { + apbclock = RCC_ClocksStatus.PCLK2_Frequency; + } + else + { + apbclock = RCC_ClocksStatus.PCLK1_Frequency; + } + + /* Determine the integer part */ + if ((USARTx->CR1 & CR1_OVER8_Set) != 0) + { + /* Integer part computing in case Oversampling mode is 8 Samples */ + integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate))); + } + else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ + { + /* Integer part computing in case Oversampling mode is 16 Samples */ + integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate))); + } + tmpreg = (integerdivider / 100) << 4; + + /* Determine the fractional part */ + fractionaldivider = integerdivider - (100 * (tmpreg >> 4)); + + /* Implement the fractional part in the register */ + if ((USARTx->CR1 & CR1_OVER8_Set) != 0) + { + tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07); + } + else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ + { + tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F); + } + + /* Write to USART BRR */ + USARTx->BRR = (uint16_t)tmpreg; +} + +/** + * @brief Fills each USART_InitStruct member with its default value. + * @param USART_InitStruct: pointer to a USART_InitTypeDef structure + * which will be initialized. + * @retval None + */ +void USART_StructInit(USART_InitTypeDef* USART_InitStruct) +{ + /* USART_InitStruct members default value */ + USART_InitStruct->USART_BaudRate = 9600; + USART_InitStruct->USART_WordLength = USART_WordLength_8b; + USART_InitStruct->USART_StopBits = USART_StopBits_1; + USART_InitStruct->USART_Parity = USART_Parity_No ; + USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; +} + +/** + * @brief Initializes the USARTx peripheral Clock according to the + * specified parameters in the USART_ClockInitStruct . + * @param USARTx: where x can be 1, 2, 3 to select the USART peripheral. + * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef + * structure that contains the configuration information for the specified + * USART peripheral. + * @note The Smart Card and Synchronous modes are not available for UART4 and UART5. + * @retval None + */ +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) +{ + uint32_t tmpreg = 0x00; + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); + assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); + assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); + assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); + +/*---------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = USARTx->CR2; + /* Clear CLKEN, CPOL, CPHA and LBCL bits */ + tmpreg &= CR2_CLOCK_CLEAR_Mask; + /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/ + /* Set CLKEN bit according to USART_Clock value */ + /* Set CPOL bit according to USART_CPOL value */ + /* Set CPHA bit according to USART_CPHA value */ + /* Set LBCL bit according to USART_LastBit value */ + tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | + USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; + /* Write to USART CR2 */ + USARTx->CR2 = (uint16_t)tmpreg; +} + +/** + * @brief Fills each USART_ClockInitStruct member with its default value. + * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef + * structure which will be initialized. + * @retval None + */ +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) +{ + /* USART_ClockInitStruct members default value */ + USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; + USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; + USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; + USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; +} + +/** + * @brief Enables or disables the specified USART peripheral. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USARTx peripheral. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected USART by setting the UE bit in the CR1 register */ + USARTx->CR1 |= CR1_UE_Set; + } + else + { + /* Disable the selected USART by clearing the UE bit in the CR1 register */ + USARTx->CR1 &= CR1_UE_Reset; + } +} + +/** + * @brief Enables or disables the specified USART interrupts. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TXE: Transmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @param NewState: new state of the specified USARTx interrupts. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState) +{ + uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00; + uint32_t usartxbase = 0x00; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CONFIG_IT(USART_IT)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + usartxbase = (uint32_t)USARTx; + + /* Get the USART register index */ + usartreg = (((uint8_t)USART_IT) >> 0x05); + + /* Get the interrupt position */ + itpos = USART_IT & IT_Mask; + itmask = (((uint32_t)0x01) << itpos); + + if (usartreg == 0x01) /* The IT is in CR1 register */ + { + usartxbase += 0x0C; + } + else if (usartreg == 0x02) /* The IT is in CR2 register */ + { + usartxbase += 0x10; + } + else /* The IT is in CR3 register */ + { + usartxbase += 0x14; + } + if (NewState != DISABLE) + { + *(__IO uint32_t*)usartxbase |= itmask; + } + else + { + *(__IO uint32_t*)usartxbase &= ~itmask; + } +} + +/** + * @brief Enables or disables the USARTs DMA interface. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_DMAReq: specifies the DMA request. + * This parameter can be any combination of the following values: + * @arg USART_DMAReq_Tx: USART DMA transmit request + * @arg USART_DMAReq_Rx: USART DMA receive request + * @param NewState: new state of the DMA Request sources. + * This parameter can be: ENABLE or DISABLE. + * @note The DMA mode is not available for UART5 except in the STM32 + * High density value line devices(STM32F10X_HD_VL). + * @retval None + */ +void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DMAREQ(USART_DMAReq)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the DMA transfer for selected requests by setting the DMAT and/or + DMAR bits in the USART CR3 register */ + USARTx->CR3 |= USART_DMAReq; + } + else + { + /* Disable the DMA transfer for selected requests by clearing the DMAT and/or + DMAR bits in the USART CR3 register */ + USARTx->CR3 &= (uint16_t)~USART_DMAReq; + } +} + +/** + * @brief Sets the address of the USART node. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_Address: Indicates the address of the USART node. + * @retval None + */ +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_ADDRESS(USART_Address)); + + /* Clear the USART address */ + USARTx->CR2 &= CR2_Address_Mask; + /* Set the USART address node */ + USARTx->CR2 |= USART_Address; +} + +/** + * @brief Selects the USART WakeUp method. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_WakeUp: specifies the USART wakeup method. + * This parameter can be one of the following values: + * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection + * @arg USART_WakeUp_AddressMark: WakeUp by an address mark + * @retval None + */ +void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_WAKEUP(USART_WakeUp)); + + USARTx->CR1 &= CR1_WAKE_Mask; + USARTx->CR1 |= USART_WakeUp; +} + +/** + * @brief Determines if the USART is in mute mode or not. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART mute mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ + USARTx->CR1 |= CR1_RWU_Set; + } + else + { + /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ + USARTx->CR1 &= CR1_RWU_Reset; + } +} + +/** + * @brief Sets the USART LIN Break detection length. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_LINBreakDetectLength: specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg USART_LINBreakDetectLength_10b: 10-bit break detection + * @arg USART_LINBreakDetectLength_11b: 11-bit break detection + * @retval None + */ +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); + + USARTx->CR2 &= CR2_LBDL_Mask; + USARTx->CR2 |= USART_LINBreakDetectLength; +} + +/** + * @brief Enables or disables the USARTs LIN mode. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART LIN mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + USARTx->CR2 |= CR2_LINEN_Set; + } + else + { + /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ + USARTx->CR2 &= CR2_LINEN_Reset; + } +} + +/** + * @brief Transmits single data through the USARTx peripheral. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param Data: the data to transmit. + * @retval None + */ +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_DATA(Data)); + + /* Transmit Data */ + USARTx->DR = (Data & (uint16_t)0x01FF); +} + +/** + * @brief Returns the most recent received data by the USARTx peripheral. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @retval The received data. + */ +uint16_t USART_ReceiveData(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Receive Data */ + return (uint16_t)(USARTx->DR & (uint16_t)0x01FF); +} + +/** + * @brief Transmits break characters. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @retval None + */ +void USART_SendBreak(USART_TypeDef* USARTx) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Send break characters */ + USARTx->CR1 |= CR1_SBK_Set; +} + +/** + * @brief Sets the specified USART guard time. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @param USART_GuardTime: specifies the guard time. + * @note The guard time bits are not available for UART4 and UART5. + * @retval None + */ +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + + /* Clear the USART Guard time */ + USARTx->GTPR &= GTPR_LSB_Mask; + /* Set the USART guard time */ + USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08); +} + +/** + * @brief Sets the system clock prescaler. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_Prescaler: specifies the prescaler clock. + * @note The function is used for IrDA mode with UART4 and UART5. + * @retval None + */ +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + + /* Clear the USART prescaler */ + USARTx->GTPR &= GTPR_MSB_Mask; + /* Set the USART prescaler */ + USARTx->GTPR |= USART_Prescaler; +} + +/** + * @brief Enables or disables the USARTs Smart Card mode. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @param NewState: new state of the Smart Card mode. + * This parameter can be: ENABLE or DISABLE. + * @note The Smart Card mode is not available for UART4 and UART5. + * @retval None + */ +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the SC mode by setting the SCEN bit in the CR3 register */ + USARTx->CR3 |= CR3_SCEN_Set; + } + else + { + /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ + USARTx->CR3 &= CR3_SCEN_Reset; + } +} + +/** + * @brief Enables or disables NACK transmission. + * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. + * @param NewState: new state of the NACK transmission. + * This parameter can be: ENABLE or DISABLE. + * @note The Smart Card mode is not available for UART4 and UART5. + * @retval None + */ +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_123_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + if (NewState != DISABLE) + { + /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ + USARTx->CR3 |= CR3_NACK_Set; + } + else + { + /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ + USARTx->CR3 &= CR3_NACK_Reset; + } +} + +/** + * @brief Enables or disables the USARTs Half Duplex communication. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART Communication. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + USARTx->CR3 |= CR3_HDSEL_Set; + } + else + { + /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ + USARTx->CR3 &= CR3_HDSEL_Reset; + } +} + + +/** + * @brief Enables or disables the USART's 8x oversampling mode. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART one bit sampling method. + * This parameter can be: ENABLE or DISABLE. + * @note + * This function has to be called before calling USART_Init() + * function in order to have correct baudrate Divider value. + * @retval None + */ +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */ + USARTx->CR1 |= CR1_OVER8_Set; + } + else + { + /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */ + USARTx->CR1 &= CR1_OVER8_Reset; + } +} + +/** + * @brief Enables or disables the USART's one bit sampling method. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the USART one bit sampling method. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */ + USARTx->CR3 |= CR3_ONEBITE_Set; + } + else + { + /* Disable tthe one bit method by clearing the ONEBITE bit in the CR3 register */ + USARTx->CR3 &= CR3_ONEBITE_Reset; + } +} + +/** + * @brief Configures the USART's IrDA interface. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IrDAMode: specifies the IrDA mode. + * This parameter can be one of the following values: + * @arg USART_IrDAMode_LowPower + * @arg USART_IrDAMode_Normal + * @retval None + */ +void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); + + USARTx->CR3 &= CR3_IRLP_Mask; + USARTx->CR3 |= USART_IrDAMode; +} + +/** + * @brief Enables or disables the USART's IrDA interface. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param NewState: new state of the IrDA mode. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ + USARTx->CR3 |= CR3_IREN_Set; + } + else + { + /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ + USARTx->CR3 &= CR3_IREN_Reset; + } +} + +/** + * @brief Checks whether the specified USART flag is set or not. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_FLAG: specifies the flag to check. + * This parameter can be one of the following values: + * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) + * @arg USART_FLAG_LBD: LIN Break detection flag + * @arg USART_FLAG_TXE: Transmit data register empty flag + * @arg USART_FLAG_TC: Transmission Complete flag + * @arg USART_FLAG_RXNE: Receive data register not empty flag + * @arg USART_FLAG_IDLE: Idle Line detection flag + * @arg USART_FLAG_ORE: OverRun Error flag + * @arg USART_FLAG_NE: Noise Error flag + * @arg USART_FLAG_FE: Framing Error flag + * @arg USART_FLAG_PE: Parity Error flag + * @retval The new state of USART_FLAG (SET or RESET). + */ +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG) +{ + FlagStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_FLAG(USART_FLAG)); + /* The CTS flag is not available for UART4 and UART5 */ + if (USART_FLAG == USART_FLAG_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + return bitstatus; +} + +/** + * @brief Clears the USARTx's pending flags. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_FLAG: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). + * @arg USART_FLAG_LBD: LIN Break detection flag. + * @arg USART_FLAG_TC: Transmission Complete flag. + * @arg USART_FLAG_RXNE: Receive data register not empty flag. + * + * @note + * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) flags are cleared by software + * sequence: a read operation to USART_SR register (USART_GetFlagStatus()) + * followed by a read operation to USART_DR register (USART_ReceiveData()). + * - RXNE flag can be also cleared by a read to the USART_DR register + * (USART_ReceiveData()). + * - TC flag can be also cleared by software sequence: a read operation to + * USART_SR register (USART_GetFlagStatus()) followed by a write operation + * to USART_DR register (USART_SendData()). + * - TXE flag is cleared only by a write to the USART_DR register + * (USART_SendData()). + * @retval None + */ +void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG) +{ + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); + /* The CTS flag is not available for UART4 and UART5 */ + if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + USARTx->SR = (uint16_t)~USART_FLAG; +} + +/** + * @brief Checks whether the specified USART interrupt has occurred or not. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IT: specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TXE: Tansmit Data Register empty interrupt + * @arg USART_IT_TC: Transmission complete interrupt + * @arg USART_IT_RXNE: Receive Data register not empty interrupt + * @arg USART_IT_IDLE: Idle line detection interrupt + * @arg USART_IT_ORE: OverRun Error interrupt + * @arg USART_IT_NE: Noise Error interrupt + * @arg USART_IT_FE: Framing Error interrupt + * @arg USART_IT_PE: Parity Error interrupt + * @retval The new state of USART_IT (SET or RESET). + */ +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT) +{ + uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00; + ITStatus bitstatus = RESET; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_GET_IT(USART_IT)); + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + /* Get the USART register index */ + usartreg = (((uint8_t)USART_IT) >> 0x05); + /* Get the interrupt position */ + itmask = USART_IT & IT_Mask; + itmask = (uint32_t)0x01 << itmask; + + if (usartreg == 0x01) /* The IT is in CR1 register */ + { + itmask &= USARTx->CR1; + } + else if (usartreg == 0x02) /* The IT is in CR2 register */ + { + itmask &= USARTx->CR2; + } + else /* The IT is in CR3 register */ + { + itmask &= USARTx->CR3; + } + + bitpos = USART_IT >> 0x08; + bitpos = (uint32_t)0x01 << bitpos; + bitpos &= USARTx->SR; + if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET)) + { + bitstatus = SET; + } + else + { + bitstatus = RESET; + } + + return bitstatus; +} + +/** + * @brief Clears the USARTx's interrupt pending bits. + * @param USARTx: Select the USART or the UART peripheral. + * This parameter can be one of the following values: + * USART1, USART2, USART3, UART4 or UART5. + * @param USART_IT: specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) + * @arg USART_IT_LBD: LIN Break detection interrupt + * @arg USART_IT_TC: Transmission complete interrupt. + * @arg USART_IT_RXNE: Receive Data register not empty interrupt. + * + * @note + * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun + * error) and IDLE (Idle line detected) pending bits are cleared by + * software sequence: a read operation to USART_SR register + * (USART_GetITStatus()) followed by a read operation to USART_DR register + * (USART_ReceiveData()). + * - RXNE pending bit can be also cleared by a read to the USART_DR register + * (USART_ReceiveData()). + * - TC pending bit can be also cleared by software sequence: a read + * operation to USART_SR register (USART_GetITStatus()) followed by a write + * operation to USART_DR register (USART_SendData()). + * - TXE pending bit is cleared only by a write to the USART_DR register + * (USART_SendData()). + * @retval None + */ +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT) +{ + uint16_t bitpos = 0x00, itmask = 0x00; + /* Check the parameters */ + assert_param(IS_USART_ALL_PERIPH(USARTx)); + assert_param(IS_USART_CLEAR_IT(USART_IT)); + /* The CTS interrupt is not available for UART4 and UART5 */ + if (USART_IT == USART_IT_CTS) + { + assert_param(IS_USART_123_PERIPH(USARTx)); + } + + bitpos = USART_IT >> 0x08; + itmask = ((uint16_t)0x01 << (uint16_t)bitpos); + USARTx->SR = (uint16_t)~itmask; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_wwdg.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_wwdg.c new file mode 100644 index 0000000..4a901e4 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Libraries/FWlib/src/stm32f10x_wwdg.c @@ -0,0 +1,224 @@ +/** + ****************************************************************************** + * @file stm32f10x_wwdg.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief This file provides all the WWDG firmware functions. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x_wwdg.h" +#include "stm32f10x_rcc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup WWDG + * @brief WWDG driver modules + * @{ + */ + +/** @defgroup WWDG_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Private_Defines + * @{ + */ + +/* ----------- WWDG registers bit address in the alias region ----------- */ +#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE) + +/* Alias word address of EWI bit */ +#define CFR_OFFSET (WWDG_OFFSET + 0x04) +#define EWI_BitNumber 0x09 +#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4)) + +/* --------------------- WWDG registers bit mask ------------------------ */ + +/* CR register bit mask */ +#define CR_WDGA_Set ((uint32_t)0x00000080) + +/* CFR register bit mask */ +#define CFR_WDGTB_Mask ((uint32_t)0xFFFFFE7F) +#define CFR_W_Mask ((uint32_t)0xFFFFFF80) +#define BIT_Mask ((uint8_t)0x7F) + +/** + * @} + */ + +/** @defgroup WWDG_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup WWDG_Private_Functions + * @{ + */ + +/** + * @brief Deinitializes the WWDG peripheral registers to their default reset values. + * @param None + * @retval None + */ +void WWDG_DeInit(void) +{ + RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE); + RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE); +} + +/** + * @brief Sets the WWDG Prescaler. + * @param WWDG_Prescaler: specifies the WWDG Prescaler. + * This parameter can be one of the following values: + * @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1 + * @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2 + * @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4 + * @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8 + * @retval None + */ +void WWDG_SetPrescaler(uint32_t WWDG_Prescaler) +{ + uint32_t tmpreg = 0; + /* Check the parameters */ + assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler)); + /* Clear WDGTB[1:0] bits */ + tmpreg = WWDG->CFR & CFR_WDGTB_Mask; + /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */ + tmpreg |= WWDG_Prescaler; + /* Store the new value */ + WWDG->CFR = tmpreg; +} + +/** + * @brief Sets the WWDG window value. + * @param WindowValue: specifies the window value to be compared to the downcounter. + * This parameter value must be lower than 0x80. + * @retval None + */ +void WWDG_SetWindowValue(uint8_t WindowValue) +{ + __IO uint32_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_WWDG_WINDOW_VALUE(WindowValue)); + /* Clear W[6:0] bits */ + + tmpreg = WWDG->CFR & CFR_W_Mask; + + /* Set W[6:0] bits according to WindowValue value */ + tmpreg |= WindowValue & (uint32_t) BIT_Mask; + + /* Store the new value */ + WWDG->CFR = tmpreg; +} + +/** + * @brief Enables the WWDG Early Wakeup interrupt(EWI). + * @param None + * @retval None + */ +void WWDG_EnableIT(void) +{ + *(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE; +} + +/** + * @brief Sets the WWDG counter value. + * @param Counter: specifies the watchdog counter value. + * This parameter must be a number between 0x40 and 0x7F. + * @retval None + */ +void WWDG_SetCounter(uint8_t Counter) +{ + /* Check the parameters */ + assert_param(IS_WWDG_COUNTER(Counter)); + /* Write to T[6:0] bits to configure the counter value, no need to do + a read-modify-write; writing a 0 to WDGA bit does nothing */ + WWDG->CR = Counter & BIT_Mask; +} + +/** + * @brief Enables WWDG and load the counter value. + * @param Counter: specifies the watchdog counter value. + * This parameter must be a number between 0x40 and 0x7F. + * @retval None + */ +void WWDG_Enable(uint8_t Counter) +{ + /* Check the parameters */ + assert_param(IS_WWDG_COUNTER(Counter)); + WWDG->CR = CR_WDGA_Set | Counter; +} + +/** + * @brief Checks whether the Early Wakeup interrupt flag is set or not. + * @param None + * @retval The new state of the Early Wakeup interrupt flag (SET or RESET) + */ +FlagStatus WWDG_GetFlagStatus(void) +{ + return (FlagStatus)(WWDG->SR); +} + +/** + * @brief Clears Early Wakeup interrupt flag. + * @param None + * @retval None + */ +void WWDG_ClearFlag(void) +{ + WWDG->SR = (uint32_t)RESET; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Listing/Project.map b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Listing/Project.map new file mode 100644 index 0000000..e3ccb35 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Listing/Project.map @@ -0,0 +1,1426 @@ +Component: ARM Compiler 5.06 update 3 (build 300) Tool: armlink [4d35c9] + +============================================================================== + +Section Cross References + + startup_stm32f10x_hd.o(STACK) refers (Special) to heapauxi.o(.text) for __use_two_region_memory + startup_stm32f10x_hd.o(HEAP) refers (Special) to heapauxi.o(.text) for __use_two_region_memory + startup_stm32f10x_hd.o(RESET) refers (Special) to heapauxi.o(.text) for __use_two_region_memory + startup_stm32f10x_hd.o(RESET) refers to startup_stm32f10x_hd.o(STACK) for __initial_sp + startup_stm32f10x_hd.o(RESET) refers to startup_stm32f10x_hd.o(.text) for Reset_Handler + startup_stm32f10x_hd.o(RESET) refers to stm32f10x_it.o(.text) for NMI_Handler + startup_stm32f10x_hd.o(RESET) refers to bsp_timer.o(.text) for TIM2_IRQHandler + startup_stm32f10x_hd.o(RESET) refers to bsp_usart.o(.text) for USART1_IRQHandler + startup_stm32f10x_hd.o(RESET) refers to bluetooth.o(.text) for USART2_IRQHandler + startup_stm32f10x_hd.o(RESET) refers to car.o(.text) for TIM6_IRQHandler + startup_stm32f10x_hd.o(.text) refers (Special) to heapauxi.o(.text) for __use_two_region_memory + startup_stm32f10x_hd.o(.text) refers to system_stm32f10x.o(.text) for SystemInit + startup_stm32f10x_hd.o(.text) refers to __main.o(!!!main) for __main + startup_stm32f10x_hd.o(.text) refers to startup_stm32f10x_hd.o(HEAP) for Heap_Mem + startup_stm32f10x_hd.o(.text) refers to startup_stm32f10x_hd.o(STACK) for Stack_Mem + system_stm32f10x.o(.text) refers to system_stm32f10x.o(.data) for SystemCoreClock + stm32f10x_adc.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB2PeriphResetCmd + stm32f10x_bkp.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_BackupResetCmd + stm32f10x_can.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB1PeriphResetCmd + stm32f10x_cec.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB1PeriphResetCmd + stm32f10x_dac.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB1PeriphResetCmd + stm32f10x_gpio.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB2PeriphResetCmd + stm32f10x_i2c.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB1PeriphResetCmd + stm32f10x_pwr.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB1PeriphResetCmd + stm32f10x_rcc.o(.text) refers to stm32f10x_rcc.o(.data) for APBAHBPrescTable + stm32f10x_spi.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB2PeriphResetCmd + stm32f10x_tim.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB2PeriphResetCmd + stm32f10x_usart.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB2PeriphResetCmd + stm32f10x_wwdg.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB1PeriphResetCmd + bsp_sys.o(.text) refers to delay.o(.text) for Delay_Init + bsp_sys.o(.text) refers to bsp_nvic.o(.text) for NVIC_Config + bsp_sys.o(.text) refers to bsp_gpio.o(.text) for LED_GPIO_Config + bsp_sys.o(.text) refers to bsp_usart.o(.text) for USART1_Init + bsp_sys.o(.text) refers to bsp_iic.o(.text) for IIC_Init + bsp_sys.o(.text) refers to moto.o(.text) for MOTO_GPIO_Init + bsp_sys.o(.text) refers to bsp_timer.o(.text) for MOTO_PWM_Init + bsp_sys.o(.text) refers to oled.o(.text) for OLED_Init + bsp_gpio.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB2PeriphClockCmd + bsp_gpio.o(.text) refers to stm32f10x_gpio.o(.text) for GPIO_Init + bsp_gpio.o(.text) refers to bsp_gpio.o(.data) for temp + bsp_usart.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB2PeriphClockCmd + bsp_usart.o(.text) refers to stm32f10x_gpio.o(.text) for GPIO_Init + bsp_usart.o(.text) refers to stm32f10x_usart.o(.text) for USART_Init + bsp_usart.o(.text) refers to bsp_usart.o(.data) for rx_count + delay.o(.text) refers to misc.o(.text) for SysTick_CLKSourceConfig + delay.o(.text) refers to delay.o(.data) for fac_us + bsp_iic.o(.text) refers to stm32f10x_gpio.o(.text) for GPIO_SetBits + bsp_iic.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB2PeriphClockCmd + bsp_timer.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB1PeriphClockCmd + bsp_timer.o(.text) refers to stm32f10x_tim.o(.text) for TIM_TimeBaseInit + bsp_timer.o(.text) refers to stm32f10x_gpio.o(.text) for GPIO_Init + bsp_timer.o(.text) refers to misc.o(.text) for NVIC_PriorityGroupConfig + moto.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB2PeriphClockCmd + moto.o(.text) refers to stm32f10x_gpio.o(.text) for GPIO_Init + oled.o(.text) refers to bsp_iic.o(.text) for IIC_Start + oled.o(.text) refers to delay.o(.text) for Delay_ms + oled.o(.text) refers to oled.o(.constdata) for F8X16 + oled.o(.text) refers to oled.o(.data) for Hzk + pid.o(.text) refers to _printf_pad.o(.text) for _printf_pre_padding + pid.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent + pid.o(.text) refers to _printf_f.o(.ARM.Collect$$_printf_percent$$00000003) for _printf_f + pid.o(.text) refers to printf1.o(x$fpl$printf1) for _printf_fp_dec + pid.o(.text) refers to f2d.o(x$fpl$f2d) for __aeabi_f2d + pid.o(.text) refers to noretval__2sprintf.o(.text) for __2sprintf + pid.o(.text) refers to oled.o(.text) for OLED_ShowString + pid.o(.text) refers to fflt_clz.o(x$fpl$fflt) for __aeabi_i2f + pid.o(.text) refers to fmul.o(x$fpl$fmul) for __aeabi_fmul + pid.o(.text) refers to faddsub_clz.o(x$fpl$fsub) for __aeabi_fsub + pid.o(.text) refers to faddsub_clz.o(x$fpl$fadd) for __aeabi_fadd + pid.o(.text) refers to ffix.o(x$fpl$ffix) for __aeabi_f2iz + pid.o(.text) refers to pid.o(.data) for Proportion + car.o(.text) refers to _printf_pad.o(.text) for _printf_pre_padding + car.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent + car.o(.text) refers to _printf_f.o(.ARM.Collect$$_printf_percent$$00000003) for _printf_f + car.o(.text) refers to printf1.o(x$fpl$printf1) for _printf_fp_dec + car.o(.text) refers to stm32f10x_tim.o(.text) for TIM_GetFlagStatus + car.o(.text) refers to bsp_gpio.o(.text) for LED_Flash + car.o(.text) refers to bsp_timer.o(.text) for Read_Encoder + car.o(.text) refers to dflt_clz.o(x$fpl$dflt) for __aeabi_i2d + car.o(.text) refers to dmul.o(x$fpl$dmul) for __aeabi_dmul + car.o(.text) refers to d2f.o(x$fpl$d2f) for __aeabi_d2f + car.o(.text) refers to f2d.o(x$fpl$f2d) for __aeabi_f2d + car.o(.text) refers to noretval__2sprintf.o(.text) for __2sprintf + car.o(.text) refers to oled.o(.text) for OLED_ShowString + car.o(.text) refers to pid.o(.text) for PID_Calc_Left + car.o(.text) refers to car.o(.data) for Encoder_Left + bluetooth.o(.text) refers to stm32f10x_rcc.o(.text) for RCC_APB2PeriphClockCmd + bluetooth.o(.text) refers to stm32f10x_gpio.o(.text) for GPIO_Init + bluetooth.o(.text) refers to stm32f10x_usart.o(.text) for USART_Init + bluetooth.o(.text) refers to misc.o(.text) for NVIC_PriorityGroupConfig + bluetooth.o(.text) refers to bluetooth.o(.data) for rx2_count + main.o(.text) refers to bsp_sys.o(.text) for System_Init + main.o(.text) refers to bluetooth.o(.text) for Bluetooth_Init + main.o(.text) refers to moto.o(.text) for Car_Stop + main.o(.text) refers to delay.o(.text) for Delay_ms + main.o(.text) refers to main.o(.bss) for BLE_RX + __2sprintf.o(.text) refers to _printf_char_common.o(.text) for _printf_char_common + __2sprintf.o(.text) refers to _sputc.o(.text) for _sputc + noretval__2sprintf.o(.text) refers to _printf_char_common.o(.text) for _printf_char_common + noretval__2sprintf.o(.text) refers to _sputc.o(.text) for _sputc + __printf.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent + __printf_flags.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent + __printf_flags.o(.text) refers to __printf_flags.o(.constdata) for .constdata + __printf_ss.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent + __printf_flags_ss.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent + __printf_flags_ss.o(.text) refers to __printf_flags_ss.o(.constdata) for .constdata + __printf_wp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit + __printf_wp.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent + __printf_flags_wp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit + __printf_flags_wp.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent + __printf_flags_wp.o(.text) refers to __printf_flags_wp.o(.constdata) for .constdata + __printf_ss_wp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit + __printf_ss_wp.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent + __printf_flags_ss_wp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit + __printf_flags_ss_wp.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent + __printf_flags_ss_wp.o(.text) refers to __printf_flags_ss_wp.o(.constdata) for .constdata + _printf_f.o(.ARM.Collect$$_printf_percent$$00000003) refers (Weak) to printf1.o(x$fpl$printf1) for _printf_fp_dec + _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) refers (Special) to _printf_percent_end.o(.ARM.Collect$$_printf_percent$$00000017) for _printf_percent_end + __main.o(!!!main) refers to __rtentry.o(.ARM.Collect$$rtentry$$00000000) for __rt_entry + d2f.o(x$fpl$d2f) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + d2f.o(x$fpl$d2f) refers to fretinf.o(x$fpl$fretinf) for __fpl_fretinf + d2f.o(x$fpl$d2f) refers to dnaninf.o(x$fpl$dnaninf) for __fpl_dnaninf + dflt_clz.o(x$fpl$dfltu) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + dflt_clz.o(x$fpl$dflt) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + dflt_clz.o(x$fpl$dfltn) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + dmul.o(x$fpl$dmul) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + dmul.o(x$fpl$dmul) refers to dretinf.o(x$fpl$dretinf) for __fpl_dretinf + dmul.o(x$fpl$dmul) refers to dnaninf.o(x$fpl$dnaninf) for __fpl_dnaninf + f2d.o(x$fpl$f2d) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + f2d.o(x$fpl$f2d) refers to fnaninf.o(x$fpl$fnaninf) for __fpl_fnaninf + f2d.o(x$fpl$f2d) refers to dretinf.o(x$fpl$dretinf) for __fpl_dretinf + faddsub_clz.o(x$fpl$fadd) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + faddsub_clz.o(x$fpl$fadd) refers to faddsub_clz.o(x$fpl$fsub) for _fsub1 + faddsub_clz.o(x$fpl$fadd) refers to fretinf.o(x$fpl$fretinf) for __fpl_fretinf + faddsub_clz.o(x$fpl$fadd) refers to fnaninf.o(x$fpl$fnaninf) for __fpl_fnaninf + faddsub_clz.o(x$fpl$frsb) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + faddsub_clz.o(x$fpl$frsb) refers to faddsub_clz.o(x$fpl$fadd) for _fadd1 + faddsub_clz.o(x$fpl$frsb) refers to faddsub_clz.o(x$fpl$fsub) for _fsub1 + faddsub_clz.o(x$fpl$fsub) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + faddsub_clz.o(x$fpl$fsub) refers to faddsub_clz.o(x$fpl$fadd) for _fadd1 + faddsub_clz.o(x$fpl$fsub) refers to fnaninf.o(x$fpl$fnaninf) for __fpl_fnaninf + ffix.o(x$fpl$ffix) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + ffix.o(x$fpl$ffix) refers to fnaninf.o(x$fpl$fnaninf) for __fpl_fnaninf + ffix.o(x$fpl$ffixr) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + ffix.o(x$fpl$ffixr) refers to fnaninf.o(x$fpl$fnaninf) for __fpl_fnaninf + fflt_clz.o(x$fpl$ffltu) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + fflt_clz.o(x$fpl$fflt) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + fflt_clz.o(x$fpl$ffltn) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + fmul.o(x$fpl$fmul) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + fmul.o(x$fpl$fmul) refers to fretinf.o(x$fpl$fretinf) for __fpl_fretinf + fmul.o(x$fpl$fmul) refers to fnaninf.o(x$fpl$fnaninf) for __fpl_fnaninf + printf1.o(x$fpl$printf1) refers to _printf_fp_dec.o(.text) for _printf_fp_dec_real + __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$0000000A) for __rt_entry_li + __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) for __rt_entry_main + __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$0000000C) for __rt_entry_postli_1 + __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$00000009) for __rt_entry_postsh_1 + __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$00000002) for __rt_entry_presh_1 + __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry4.o(.ARM.Collect$$rtentry$$00000004) for __rt_entry_sh + _printf_fp_dec.o(.text) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + _printf_fp_dec.o(.text) refers (Special) to lc_numeric_c.o(locale$$code) for _get_lc_numeric + _printf_fp_dec.o(.text) refers to bigflt0.o(.text) for _btod_etento + _printf_fp_dec.o(.text) refers to btod.o(CL$$btod_d2e) for _btod_d2e + _printf_fp_dec.o(.text) refers to btod.o(CL$$btod_ediv) for _btod_ediv + _printf_fp_dec.o(.text) refers to btod.o(CL$$btod_emul) for _btod_emul + _printf_fp_dec.o(.text) refers to lludiv10.o(.text) for _ll_udiv10 + _printf_fp_dec.o(.text) refers to fpclassify.o(i.__ARM_fpclassify) for __ARM_fpclassify + _printf_fp_dec.o(.text) refers to _printf_fp_infnan.o(.text) for _printf_fp_infnan + _printf_fp_dec.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_pre_padding + _printf_fp_dec.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_pre_padding + _printf_fp_dec.o(.text) refers to rt_locale_intlibspace.o(.text) for __rt_locale + _printf_fp_dec.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_post_padding + _printf_char_common.o(.text) refers to __printf_wp.o(.text) for __printf + dnaninf.o(x$fpl$dnaninf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + dretinf.o(x$fpl$dretinf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + fnaninf.o(x$fpl$fnaninf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + fretinf.o(x$fpl$fretinf) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + __rtentry2.o(.ARM.Collect$$rtentry$$00000008) refers to boardinit2.o(.text) for _platform_post_stackheap_init + __rtentry2.o(.ARM.Collect$$rtentry$$0000000A) refers to libinit.o(.ARM.Collect$$libinit$$00000000) for __rt_lib_init + __rtentry2.o(.ARM.Collect$$rtentry$$0000000B) refers to boardinit3.o(.text) for _platform_post_lib_init + __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) refers to main.o(.text) for main + __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) refers to exit.o(.text) for exit + __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$00000001) for .ARM.Collect$$rtentry$$00000001 + __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$00000008) for .ARM.Collect$$rtentry$$00000008 + __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$0000000A) for .ARM.Collect$$rtentry$$0000000A + __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$0000000B) for .ARM.Collect$$rtentry$$0000000B + __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) for .ARM.Collect$$rtentry$$0000000D + __rtentry4.o(.ARM.Collect$$rtentry$$00000004) refers to sys_stackheap_outer.o(.text) for __user_setup_stackheap + __rtentry4.o(.ARM.exidx) refers to __rtentry4.o(.ARM.Collect$$rtentry$$00000004) for .ARM.Collect$$rtentry$$00000004 + rt_locale.o(.text) refers to rt_locale.o(.bss) for __rt_locale_data + rt_locale_intlibspace.o(.text) refers to libspace.o(.bss) for __libspace_start + _printf_fp_infnan.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_pre_padding + _printf_fp_infnan.o(.text) refers (Weak) to _printf_pad.o(.text) for _printf_post_padding + bigflt0.o(.text) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + bigflt0.o(.text) refers to btod.o(CL$$btod_emul) for _btod_emul + bigflt0.o(.text) refers to btod.o(CL$$btod_ediv) for _btod_ediv + bigflt0.o(.text) refers to bigflt0.o(.constdata) for .constdata + bigflt0.o(.constdata) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + btod.o(CL$$btod_d2e) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + btod.o(CL$$btod_d2e) refers to btod.o(CL$$btod_d2e_norm_op1) for _d2e_norm_op1 + btod.o(CL$$btod_d2e_norm_op1) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + btod.o(CL$$btod_d2e_norm_op1) refers to btod.o(CL$$btod_d2e_denorm_low) for _d2e_denorm_low + btod.o(CL$$btod_d2e_denorm_low) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + btod.o(CL$$btod_emul) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + btod.o(CL$$btod_emul) refers to btod.o(CL$$btod_mult_common) for __btod_mult_common + btod.o(CL$$btod_emul) refers to btod.o(CL$$btod_e2e) for _e2e + btod.o(CL$$btod_ediv) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + btod.o(CL$$btod_ediv) refers to btod.o(CL$$btod_div_common) for __btod_div_common + btod.o(CL$$btod_ediv) refers to btod.o(CL$$btod_e2e) for _e2e + btod.o(CL$$btod_emuld) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + btod.o(CL$$btod_emuld) refers to btod.o(CL$$btod_mult_common) for __btod_mult_common + btod.o(CL$$btod_emuld) refers to btod.o(CL$$btod_e2d) for _e2d + btod.o(CL$$btod_edivd) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + btod.o(CL$$btod_edivd) refers to btod.o(CL$$btod_div_common) for __btod_div_common + btod.o(CL$$btod_edivd) refers to btod.o(CL$$btod_e2d) for _e2d + btod.o(CL$$btod_e2e) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + btod.o(CL$$btod_e2d) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + btod.o(CL$$btod_e2d) refers to btod.o(CL$$btod_e2e) for _e2e + btod.o(CL$$btod_mult_common) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + btod.o(CL$$btod_div_common) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + lc_numeric_c.o(locale$$data) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000016) for __rt_lib_init_lc_numeric_2 + lc_numeric_c.o(locale$$code) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000016) for __rt_lib_init_lc_numeric_2 + lc_numeric_c.o(locale$$code) refers to strcmpv7m.o(.text) for strcmp + lc_numeric_c.o(locale$$code) refers to lc_numeric_c.o(locale$$data) for __lcnum_c_name + istatus.o(x$fpl$ieeestatus) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + fpclassify.o(i.__ARM_fpclassify) refers (Special) to usenofp.o(x$fpl$usenofp) for __I$use$fp + libspace.o(.text) refers to libspace.o(.bss) for __libspace_start + sys_stackheap_outer.o(.text) refers to libspace.o(.text) for __user_perproc_libspace + sys_stackheap_outer.o(.text) refers to startup_stm32f10x_hd.o(.text) for __user_initial_stackheap + exit.o(.text) refers to rtexit.o(.ARM.Collect$$rtexit$$00000000) for __rt_exit + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000002E) for __rt_lib_init_alloca_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000002C) for __rt_lib_init_argv_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000001B) for __rt_lib_init_atexit_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000021) for __rt_lib_init_clock_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000032) for __rt_lib_init_cpp_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000030) for __rt_lib_init_exceptions_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000002) for __rt_lib_init_fp_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000001F) for __rt_lib_init_fp_trap_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000023) for __rt_lib_init_getenv_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000000A) for __rt_lib_init_heap_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000011) for __rt_lib_init_lc_collate_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000013) for __rt_lib_init_lc_ctype_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000015) for __rt_lib_init_lc_monetary_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000017) for __rt_lib_init_lc_numeric_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000019) for __rt_lib_init_lc_time_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000004) for __rt_lib_init_preinit_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000000E) for __rt_lib_init_rand_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000033) for __rt_lib_init_return + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000001D) for __rt_lib_init_signal_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000025) for __rt_lib_init_stdio_1 + libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000000C) for __rt_lib_init_user_alloc_1 + libinit2.o(.ARM.Collect$$libinit$$0000000F) refers (Weak) to rt_locale_intlibspace.o(.text) for __rt_locale + libinit2.o(.ARM.Collect$$libinit$$00000010) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F + libinit2.o(.ARM.Collect$$libinit$$00000012) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F + libinit2.o(.ARM.Collect$$libinit$$00000014) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F + libinit2.o(.ARM.Collect$$libinit$$00000016) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F + libinit2.o(.ARM.Collect$$libinit$$00000016) refers (Weak) to lc_numeric_c.o(locale$$code) for _get_lc_numeric + libinit2.o(.ARM.Collect$$libinit$$00000018) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F + libinit2.o(.ARM.Collect$$libinit$$00000026) refers to argv_veneer.o(.emb_text) for __ARM_argv_veneer + libinit2.o(.ARM.Collect$$libinit$$00000027) refers to argv_veneer.o(.emb_text) for __ARM_argv_veneer + rtexit.o(.ARM.Collect$$rtexit$$00000000) refers (Special) to rtexit2.o(.ARM.Collect$$rtexit$$00000004) for __rt_exit_exit + rtexit.o(.ARM.Collect$$rtexit$$00000000) refers (Special) to rtexit2.o(.ARM.Collect$$rtexit$$00000003) for __rt_exit_ls + rtexit.o(.ARM.Collect$$rtexit$$00000000) refers (Special) to rtexit2.o(.ARM.Collect$$rtexit$$00000002) for __rt_exit_prels_1 + rtexit.o(.ARM.exidx) refers (Special) to rtexit2.o(.ARM.Collect$$rtexit$$00000004) for __rt_exit_exit + rtexit.o(.ARM.exidx) refers (Special) to rtexit2.o(.ARM.Collect$$rtexit$$00000003) for __rt_exit_ls + rtexit.o(.ARM.exidx) refers (Special) to rtexit2.o(.ARM.Collect$$rtexit$$00000002) for __rt_exit_prels_1 + rtexit.o(.ARM.exidx) refers to rtexit.o(.ARM.Collect$$rtexit$$00000000) for .ARM.Collect$$rtexit$$00000000 + argv_veneer.o(.emb_text) refers to no_argv.o(.text) for __ARM_get_argv + rtexit2.o(.ARM.Collect$$rtexit$$00000003) refers to libshutdown.o(.ARM.Collect$$libshutdown$$00000000) for __rt_lib_shutdown + rtexit2.o(.ARM.Collect$$rtexit$$00000004) refers to sys_exit.o(.text) for _sys_exit + rtexit2.o(.ARM.exidx) refers to rtexit2.o(.ARM.Collect$$rtexit$$00000001) for .ARM.Collect$$rtexit$$00000001 + rtexit2.o(.ARM.exidx) refers to rtexit2.o(.ARM.Collect$$rtexit$$00000003) for .ARM.Collect$$rtexit$$00000003 + rtexit2.o(.ARM.exidx) refers to rtexit2.o(.ARM.Collect$$rtexit$$00000004) for .ARM.Collect$$rtexit$$00000004 + _get_argv_nomalloc.o(.text) refers (Special) to hrguard.o(.text) for __heap_region$guard + _get_argv_nomalloc.o(.text) refers to defsig_rtmem_outer.o(.text) for __rt_SIGRTMEM + _get_argv_nomalloc.o(.text) refers to sys_command.o(.text) for _sys_command_string + sys_command.o(.text) refers (Special) to use_no_semi.o(.text) for __I$use$semihosting + sys_command.o(.text) refers (Special) to indicate_semi.o(.text) for __semihosting_library_function + sys_exit.o(.text) refers (Special) to use_no_semi.o(.text) for __I$use$semihosting + sys_exit.o(.text) refers (Special) to indicate_semi.o(.text) for __semihosting_library_function + defsig_rtmem_outer.o(.text) refers to defsig_rtmem_inner.o(.text) for __rt_SIGRTMEM_inner + defsig_rtmem_outer.o(.text) refers to defsig_exit.o(.text) for __sig_exit + defsig_rtmem_formal.o(.text) refers to rt_raise.o(.text) for __rt_raise + libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000002) for __rt_lib_shutdown_cpp_1 + libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000007) for __rt_lib_shutdown_fp_trap_1 + libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$0000000F) for __rt_lib_shutdown_heap_1 + libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000010) for __rt_lib_shutdown_return + libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$0000000A) for __rt_lib_shutdown_signal_1 + libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000004) for __rt_lib_shutdown_stdio_1 + libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$0000000C) for __rt_lib_shutdown_user_alloc_1 + rt_raise.o(.text) refers to __raise.o(.text) for __raise + rt_raise.o(.text) refers to sys_exit.o(.text) for _sys_exit + defsig_exit.o(.text) refers to sys_exit.o(.text) for _sys_exit + defsig_rtmem_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display + __raise.o(.text) refers to defsig.o(CL$$defsig) for __default_signal_handler + defsig_general.o(.text) refers to sys_wrch.o(.text) for _ttywrch + sys_wrch.o(.text) refers (Special) to use_no_semi.o(.text) for __I$use$semihosting + sys_wrch.o(.text) refers (Special) to indicate_semi.o(.text) for __semihosting_library_function + defsig.o(CL$$defsig) refers to defsig_rtmem_inner.o(.text) for __rt_SIGRTMEM_inner + defsig_abrt_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display + defsig_fpe_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display + defsig_rtred_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display + defsig_stak_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display + defsig_pvfn_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display + defsig_cppl_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display + defsig_segv_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display + defsig_other.o(.text) refers to defsig_general.o(.text) for __default_signal_display + + +============================================================================== + +Removing Unused input sections from the image. + + Removing core_cm3.o(.emb_text), (32 bytes). + Removing stm32f10x_adc.o(.text), (1102 bytes). + Removing stm32f10x_bkp.o(.text), (196 bytes). + Removing stm32f10x_can.o(.text), (2544 bytes). + Removing stm32f10x_cec.o(.text), (288 bytes). + Removing stm32f10x_crc.o(.text), (72 bytes). + Removing stm32f10x_dac.o(.text), (396 bytes). + Removing stm32f10x_dbgmcu.o(.text), (48 bytes). + Removing stm32f10x_dma.o(.text), (596 bytes). + Removing stm32f10x_exti.o(.text), (284 bytes). + Removing stm32f10x_flash.o(.text), (1468 bytes). + Removing stm32f10x_fsmc.o(.text), (1548 bytes). + Removing stm32f10x_i2c.o(.text), (1028 bytes). + Removing stm32f10x_iwdg.o(.text), (64 bytes). + Removing stm32f10x_pwr.o(.text), (204 bytes). + Removing stm32f10x_rtc.o(.text), (328 bytes). + Removing stm32f10x_sdio.o(.text), (468 bytes). + Removing stm32f10x_spi.o(.text), (780 bytes). + Removing stm32f10x_wwdg.o(.text), (136 bytes). + +19 unused section(s) (total 11582 bytes) removed from the image. + +============================================================================== + +Image Symbol Table + + Local Symbols + + Symbol Name Value Ov Type Size Object(Section) + + ../clib/angel/boardlib.s 0x00000000 Number 0 boardinit1.o ABSOLUTE + ../clib/angel/boardlib.s 0x00000000 Number 0 boardinit2.o ABSOLUTE + ../clib/angel/boardlib.s 0x00000000 Number 0 boardshut.o ABSOLUTE + ../clib/angel/boardlib.s 0x00000000 Number 0 boardinit3.o ABSOLUTE + ../clib/angel/dczerorl2.s 0x00000000 Number 0 __dczerorl2.o ABSOLUTE + ../clib/angel/handlers.s 0x00000000 Number 0 __scatter_zi.o ABSOLUTE + ../clib/angel/kernel.s 0x00000000 Number 0 __rtentry.o ABSOLUTE + ../clib/angel/kernel.s 0x00000000 Number 0 __rtentry2.o ABSOLUTE + ../clib/angel/kernel.s 0x00000000 Number 0 rtexit2.o ABSOLUTE + ../clib/angel/kernel.s 0x00000000 Number 0 rtexit.o ABSOLUTE + ../clib/angel/kernel.s 0x00000000 Number 0 __rtentry4.o ABSOLUTE + ../clib/angel/rt.s 0x00000000 Number 0 rt_locale.o ABSOLUTE + ../clib/angel/rt.s 0x00000000 Number 0 rt_locale_intlibspace.o ABSOLUTE + ../clib/angel/rt.s 0x00000000 Number 0 rt_raise.o ABSOLUTE + ../clib/angel/scatter.s 0x00000000 Number 0 __scatter.o ABSOLUTE + ../clib/angel/startup.s 0x00000000 Number 0 __main.o ABSOLUTE + ../clib/angel/sys.s 0x00000000 Number 0 use_no_semi.o ABSOLUTE + ../clib/angel/sys.s 0x00000000 Number 0 indicate_semi.o ABSOLUTE + ../clib/angel/sys.s 0x00000000 Number 0 sys_stackheap_outer.o ABSOLUTE + ../clib/angel/sys.s 0x00000000 Number 0 libspace.o ABSOLUTE + ../clib/angel/sysapp.c 0x00000000 Number 0 sys_command.o ABSOLUTE + ../clib/angel/sysapp.c 0x00000000 Number 0 sys_exit.o ABSOLUTE + ../clib/angel/sysapp.c 0x00000000 Number 0 sys_wrch.o ABSOLUTE + ../clib/armsys.c 0x00000000 Number 0 no_argv.o ABSOLUTE + ../clib/armsys.c 0x00000000 Number 0 argv_veneer.o ABSOLUTE + ../clib/armsys.c 0x00000000 Number 0 argv_veneer.o ABSOLUTE + ../clib/armsys.c 0x00000000 Number 0 _get_argv_nomalloc.o ABSOLUTE + ../clib/bigflt.c 0x00000000 Number 0 bigflt0.o ABSOLUTE + ../clib/btod.s 0x00000000 Number 0 btod.o ABSOLUTE + ../clib/heapalloc.c 0x00000000 Number 0 hrguard.o ABSOLUTE + ../clib/heapaux.c 0x00000000 Number 0 heapauxi.o ABSOLUTE + ../clib/libinit.s 0x00000000 Number 0 libinit2.o ABSOLUTE + ../clib/libinit.s 0x00000000 Number 0 libshutdown2.o ABSOLUTE + ../clib/libinit.s 0x00000000 Number 0 libshutdown.o ABSOLUTE + ../clib/libinit.s 0x00000000 Number 0 libinit.o ABSOLUTE + ../clib/locale.s 0x00000000 Number 0 lc_numeric_c.o ABSOLUTE + ../clib/longlong.s 0x00000000 Number 0 lludiv10.o ABSOLUTE + ../clib/memcpset.s 0x00000000 Number 0 strcmpv7m.o ABSOLUTE + ../clib/misc.s 0x00000000 Number 0 printf_stubs.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 _printf_fp_dec.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 _printf_char_common.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 _sputc.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 __printf_flags_ss_wp.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 __printf_flags_wp.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 __printf_wp.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 __printf.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 __printf_flags_ss.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 __printf_ss.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 __printf_flags.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 _printf_fp_infnan.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 _printf_pad.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 noretval__2sprintf.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 __2sprintf.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 __printf_ss_wp.o ABSOLUTE + ../clib/printf.c 0x00000000 Number 0 __printf_nopercent.o ABSOLUTE + ../clib/printf_percent.s 0x00000000 Number 0 _printf_percent_end.o ABSOLUTE + ../clib/printf_percent.s 0x00000000 Number 0 _printf_f.o ABSOLUTE + ../clib/printf_percent.s 0x00000000 Number 0 _printf_percent.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_other.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_general.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_rtmem_outer.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 __raise.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_segv_inner.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_cppl_inner.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_rtmem_inner.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_exit.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_pvfn_inner.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_stak_inner.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_rtred_inner.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_fpe_inner.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_rtmem_formal.o ABSOLUTE + ../clib/signal.c 0x00000000 Number 0 defsig_abrt_inner.o ABSOLUTE + ../clib/signal.s 0x00000000 Number 0 defsig.o ABSOLUTE + ../clib/stdlib.c 0x00000000 Number 0 exit.o ABSOLUTE + ../fplib/d2f.s 0x00000000 Number 0 d2f.o ABSOLUTE + ../fplib/dflt.s 0x00000000 Number 0 dflt_clz.o ABSOLUTE + ../fplib/dmul.s 0x00000000 Number 0 dmul.o ABSOLUTE + ../fplib/dnaninf.s 0x00000000 Number 0 dnaninf.o ABSOLUTE + ../fplib/dretinf.s 0x00000000 Number 0 dretinf.o ABSOLUTE + ../fplib/f2d.s 0x00000000 Number 0 f2d.o ABSOLUTE + ../fplib/faddsub.s 0x00000000 Number 0 faddsub_clz.o ABSOLUTE + ../fplib/ffix.s 0x00000000 Number 0 ffix.o ABSOLUTE + ../fplib/fflt.s 0x00000000 Number 0 fflt_clz.o ABSOLUTE + ../fplib/fmul.s 0x00000000 Number 0 fmul.o ABSOLUTE + ../fplib/fnaninf.s 0x00000000 Number 0 fnaninf.o ABSOLUTE + ../fplib/fpinit.s 0x00000000 Number 0 fpinit.o ABSOLUTE + ../fplib/fretinf.s 0x00000000 Number 0 fretinf.o ABSOLUTE + ../fplib/istatus.s 0x00000000 Number 0 istatus.o ABSOLUTE + ../fplib/printf1.s 0x00000000 Number 0 printf1.o ABSOLUTE + ../fplib/usenofp.s 0x00000000 Number 0 usenofp.o ABSOLUTE + ../mathlib/fpclassify.c 0x00000000 Number 0 fpclassify.o ABSOLUTE + ..\DRV\bsp_GPIO.c 0x00000000 Number 0 bsp_gpio.o ABSOLUTE + ..\DRV\bsp_NVIC.C 0x00000000 Number 0 bsp_nvic.o ABSOLUTE + ..\DRV\bsp_iic.c 0x00000000 Number 0 bsp_iic.o ABSOLUTE + ..\DRV\bsp_sys.c 0x00000000 Number 0 bsp_sys.o ABSOLUTE + ..\DRV\bsp_timer.c 0x00000000 Number 0 bsp_timer.o ABSOLUTE + ..\DRV\bsp_usart.c 0x00000000 Number 0 bsp_usart.o ABSOLUTE + ..\DRV\delay.c 0x00000000 Number 0 delay.o ABSOLUTE + ..\HARDWARE\MOTO\bluetooth.c 0x00000000 Number 0 bluetooth.o ABSOLUTE + ..\HARDWARE\MOTO\car.c 0x00000000 Number 0 car.o ABSOLUTE + ..\HARDWARE\MOTO\moto.c 0x00000000 Number 0 moto.o ABSOLUTE + ..\HARDWARE\OLED\oled.c 0x00000000 Number 0 oled.o ABSOLUTE + ..\HARDWARE\PID\pid.c 0x00000000 Number 0 pid.o ABSOLUTE + ..\Libraries\CMSIS\core_cm3.c 0x00000000 Number 0 core_cm3.o ABSOLUTE + ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s 0x00000000 Number 0 startup_stm32f10x_hd.o ABSOLUTE + ..\Libraries\CMSIS\system_stm32f10x.c 0x00000000 Number 0 system_stm32f10x.o ABSOLUTE + ..\Libraries\FWlib\src\misc.c 0x00000000 Number 0 misc.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_adc.c 0x00000000 Number 0 stm32f10x_adc.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_bkp.c 0x00000000 Number 0 stm32f10x_bkp.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_can.c 0x00000000 Number 0 stm32f10x_can.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_cec.c 0x00000000 Number 0 stm32f10x_cec.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_crc.c 0x00000000 Number 0 stm32f10x_crc.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_dac.c 0x00000000 Number 0 stm32f10x_dac.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_dbgmcu.c 0x00000000 Number 0 stm32f10x_dbgmcu.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_dma.c 0x00000000 Number 0 stm32f10x_dma.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_exti.c 0x00000000 Number 0 stm32f10x_exti.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_flash.c 0x00000000 Number 0 stm32f10x_flash.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_fsmc.c 0x00000000 Number 0 stm32f10x_fsmc.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_gpio.c 0x00000000 Number 0 stm32f10x_gpio.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_i2c.c 0x00000000 Number 0 stm32f10x_i2c.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_iwdg.c 0x00000000 Number 0 stm32f10x_iwdg.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_pwr.c 0x00000000 Number 0 stm32f10x_pwr.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_rcc.c 0x00000000 Number 0 stm32f10x_rcc.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_rtc.c 0x00000000 Number 0 stm32f10x_rtc.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_sdio.c 0x00000000 Number 0 stm32f10x_sdio.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_spi.c 0x00000000 Number 0 stm32f10x_spi.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_tim.c 0x00000000 Number 0 stm32f10x_tim.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_usart.c 0x00000000 Number 0 stm32f10x_usart.o ABSOLUTE + ..\Libraries\FWlib\src\stm32f10x_wwdg.c 0x00000000 Number 0 stm32f10x_wwdg.o ABSOLUTE + ..\User\main.c 0x00000000 Number 0 main.o ABSOLUTE + ..\User\stm32f10x_it.c 0x00000000 Number 0 stm32f10x_it.o ABSOLUTE + ..\\Libraries\\CMSIS\\core_cm3.c 0x00000000 Number 0 core_cm3.o ABSOLUTE + dc.s 0x00000000 Number 0 dc.o ABSOLUTE + RESET 0x08000000 Section 304 startup_stm32f10x_hd.o(RESET) + !!!main 0x08000130 Section 8 __main.o(!!!main) + !!!scatter 0x08000138 Section 52 __scatter.o(!!!scatter) + !!dczerorl2 0x0800016c Section 90 __dczerorl2.o(!!dczerorl2) + !!handler_zi 0x080001c8 Section 28 __scatter_zi.o(!!handler_zi) + .ARM.Collect$$_printf_percent$$00000000 0x080001e4 Section 0 _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) + .ARM.Collect$$_printf_percent$$00000003 0x080001e4 Section 6 _printf_f.o(.ARM.Collect$$_printf_percent$$00000003) + .ARM.Collect$$_printf_percent$$00000017 0x080001ea Section 4 _printf_percent_end.o(.ARM.Collect$$_printf_percent$$00000017) + .ARM.Collect$$libinit$$00000000 0x080001ee Section 2 libinit.o(.ARM.Collect$$libinit$$00000000) + .ARM.Collect$$libinit$$00000002 0x080001f0 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000002) + .ARM.Collect$$libinit$$00000004 0x080001f0 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000004) + .ARM.Collect$$libinit$$0000000A 0x080001f0 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000000A) + .ARM.Collect$$libinit$$0000000C 0x080001f0 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000000C) + .ARM.Collect$$libinit$$0000000E 0x080001f0 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000000E) + .ARM.Collect$$libinit$$0000000F 0x080001f0 Section 6 libinit2.o(.ARM.Collect$$libinit$$0000000F) + .ARM.Collect$$libinit$$00000011 0x080001f6 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000011) + .ARM.Collect$$libinit$$00000013 0x080001f6 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000013) + .ARM.Collect$$libinit$$00000015 0x080001f6 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000015) + .ARM.Collect$$libinit$$00000016 0x080001f6 Section 10 libinit2.o(.ARM.Collect$$libinit$$00000016) + .ARM.Collect$$libinit$$00000017 0x08000200 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000017) + .ARM.Collect$$libinit$$00000019 0x08000200 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000019) + .ARM.Collect$$libinit$$0000001B 0x08000200 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000001B) + .ARM.Collect$$libinit$$0000001D 0x08000200 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000001D) + .ARM.Collect$$libinit$$0000001F 0x08000200 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000001F) + .ARM.Collect$$libinit$$00000021 0x08000200 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000021) + .ARM.Collect$$libinit$$00000023 0x08000200 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000023) + .ARM.Collect$$libinit$$00000025 0x08000200 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000025) + .ARM.Collect$$libinit$$0000002C 0x08000200 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000002C) + .ARM.Collect$$libinit$$0000002E 0x08000200 Section 0 libinit2.o(.ARM.Collect$$libinit$$0000002E) + .ARM.Collect$$libinit$$00000030 0x08000200 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000030) + .ARM.Collect$$libinit$$00000032 0x08000200 Section 0 libinit2.o(.ARM.Collect$$libinit$$00000032) + .ARM.Collect$$libinit$$00000033 0x08000200 Section 2 libinit2.o(.ARM.Collect$$libinit$$00000033) + .ARM.Collect$$libshutdown$$00000000 0x08000202 Section 2 libshutdown.o(.ARM.Collect$$libshutdown$$00000000) + .ARM.Collect$$libshutdown$$00000002 0x08000204 Section 0 libshutdown2.o(.ARM.Collect$$libshutdown$$00000002) + .ARM.Collect$$libshutdown$$00000004 0x08000204 Section 0 libshutdown2.o(.ARM.Collect$$libshutdown$$00000004) + .ARM.Collect$$libshutdown$$00000007 0x08000204 Section 0 libshutdown2.o(.ARM.Collect$$libshutdown$$00000007) + .ARM.Collect$$libshutdown$$0000000A 0x08000204 Section 0 libshutdown2.o(.ARM.Collect$$libshutdown$$0000000A) + .ARM.Collect$$libshutdown$$0000000C 0x08000204 Section 0 libshutdown2.o(.ARM.Collect$$libshutdown$$0000000C) + .ARM.Collect$$libshutdown$$0000000F 0x08000204 Section 0 libshutdown2.o(.ARM.Collect$$libshutdown$$0000000F) + .ARM.Collect$$libshutdown$$00000010 0x08000204 Section 2 libshutdown2.o(.ARM.Collect$$libshutdown$$00000010) + .ARM.Collect$$rtentry$$00000000 0x08000206 Section 0 __rtentry.o(.ARM.Collect$$rtentry$$00000000) + .ARM.Collect$$rtentry$$00000002 0x08000206 Section 0 __rtentry2.o(.ARM.Collect$$rtentry$$00000002) + .ARM.Collect$$rtentry$$00000004 0x08000206 Section 6 __rtentry4.o(.ARM.Collect$$rtentry$$00000004) + .ARM.Collect$$rtentry$$00000009 0x0800020c Section 0 __rtentry2.o(.ARM.Collect$$rtentry$$00000009) + .ARM.Collect$$rtentry$$0000000A 0x0800020c Section 4 __rtentry2.o(.ARM.Collect$$rtentry$$0000000A) + .ARM.Collect$$rtentry$$0000000C 0x08000210 Section 0 __rtentry2.o(.ARM.Collect$$rtentry$$0000000C) + .ARM.Collect$$rtentry$$0000000D 0x08000210 Section 8 __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) + .ARM.Collect$$rtexit$$00000000 0x08000218 Section 2 rtexit.o(.ARM.Collect$$rtexit$$00000000) + .ARM.Collect$$rtexit$$00000002 0x0800021a Section 0 rtexit2.o(.ARM.Collect$$rtexit$$00000002) + .ARM.Collect$$rtexit$$00000003 0x0800021a Section 4 rtexit2.o(.ARM.Collect$$rtexit$$00000003) + .ARM.Collect$$rtexit$$00000004 0x0800021e Section 6 rtexit2.o(.ARM.Collect$$rtexit$$00000004) + .text 0x08000224 Section 64 startup_stm32f10x_hd.o(.text) + .text 0x08000264 Section 0 system_stm32f10x.o(.text) + SetSysClockTo72 0x08000265 Thumb Code 214 system_stm32f10x.o(.text) + SetSysClock 0x0800033b Thumb Code 8 system_stm32f10x.o(.text) + .text 0x08000444 Section 0 misc.o(.text) + .text 0x08000520 Section 0 stm32f10x_gpio.o(.text) + .text 0x0800087c Section 0 stm32f10x_rcc.o(.text) + .text 0x08000c20 Section 0 stm32f10x_tim.o(.text) + TI4_Config 0x080010c7 Thumb Code 130 stm32f10x_tim.o(.text) + TI3_Config 0x0800115b Thumb Code 122 stm32f10x_tim.o(.text) + TI2_Config 0x080011ef Thumb Code 130 stm32f10x_tim.o(.text) + TI1_Config 0x08001283 Thumb Code 108 stm32f10x_tim.o(.text) + .text 0x08001a3c Section 0 stm32f10x_usart.o(.text) + .text 0x08001e44 Section 0 bsp_sys.o(.text) + .text 0x08001f70 Section 0 bsp_gpio.o(.text) + .text 0x08001fd8 Section 0 bsp_nvic.o(.text) + .text 0x08001fdc Section 0 bsp_usart.o(.text) + .text 0x08002148 Section 0 delay.o(.text) + .text 0x080021f4 Section 0 bsp_iic.o(.text) + .text 0x0800240c Section 0 bsp_timer.o(.text) + .text 0x0800274c Section 0 moto.o(.text) + .text 0x08002868 Section 0 oled.o(.text) + .text 0x08002d64 Section 0 pid.o(.text) + .text 0x08002ee4 Section 0 car.o(.text) + .text 0x08003118 Section 0 bluetooth.o(.text) + .text 0x08003270 Section 0 main.o(.text) + .text 0x08003334 Section 0 stm32f10x_it.o(.text) + .text 0x0800334c Section 0 noretval__2sprintf.o(.text) + .text 0x08003374 Section 0 _printf_pad.o(.text) + .text 0x080033c2 Section 0 __printf_wp.o(.text) + .text 0x080034d0 Section 0 heapauxi.o(.text) + .text 0x080034d6 Section 0 _printf_fp_dec.o(.text) + _fp_digits 0x080034d9 Thumb Code 428 _printf_fp_dec.o(.text) + .text 0x080038f0 Section 0 _printf_char_common.o(.text) + _printf_input_char 0x080038f1 Thumb Code 10 _printf_char_common.o(.text) + .text 0x08003920 Section 0 _sputc.o(.text) + .text 0x0800392c Section 8 rt_locale_intlibspace.o(.text) + .text 0x08003934 Section 138 lludiv10.o(.text) + .text 0x080039c0 Section 0 _printf_fp_infnan.o(.text) + .text 0x08003a40 Section 0 bigflt0.o(.text) + .text 0x08003b1c Section 8 libspace.o(.text) + .text 0x08003b24 Section 74 sys_stackheap_outer.o(.text) + .text 0x08003b6e Section 0 exit.o(.text) + .text 0x08003b80 Section 128 strcmpv7m.o(.text) + .text 0x08003c00 Section 0 sys_exit.o(.text) + .text 0x08003c0c Section 2 use_no_semi.o(.text) + .text 0x08003c0e Section 0 indicate_semi.o(.text) + CL$$btod_d2e 0x08003c0e Section 62 btod.o(CL$$btod_d2e) + CL$$btod_d2e_denorm_low 0x08003c4c Section 70 btod.o(CL$$btod_d2e_denorm_low) + CL$$btod_d2e_norm_op1 0x08003c92 Section 96 btod.o(CL$$btod_d2e_norm_op1) + CL$$btod_div_common 0x08003cf2 Section 824 btod.o(CL$$btod_div_common) + CL$$btod_e2e 0x0800402a Section 198 btod.o(CL$$btod_e2e) + CL$$btod_ediv 0x080040f0 Section 40 btod.o(CL$$btod_ediv) + CL$$btod_emul 0x08004118 Section 40 btod.o(CL$$btod_emul) + CL$$btod_mult_common 0x08004140 Section 580 btod.o(CL$$btod_mult_common) + i.__ARM_fpclassify 0x08004384 Section 0 fpclassify.o(i.__ARM_fpclassify) + i._is_digit 0x080043ac Section 0 __printf_wp.o(i._is_digit) + locale$$code 0x080043bc Section 44 lc_numeric_c.o(locale$$code) + x$fpl$d2f 0x080043e8 Section 98 d2f.o(x$fpl$d2f) + x$fpl$dflt 0x0800444a Section 46 dflt_clz.o(x$fpl$dflt) + x$fpl$dmul 0x08004478 Section 340 dmul.o(x$fpl$dmul) + x$fpl$dnaninf 0x080045cc Section 156 dnaninf.o(x$fpl$dnaninf) + x$fpl$dretinf 0x08004668 Section 12 dretinf.o(x$fpl$dretinf) + x$fpl$f2d 0x08004674 Section 86 f2d.o(x$fpl$f2d) + x$fpl$fadd 0x080046cc Section 196 faddsub_clz.o(x$fpl$fadd) + _fadd1 0x080046db Thumb Code 0 faddsub_clz.o(x$fpl$fadd) + x$fpl$ffix 0x08004790 Section 54 ffix.o(x$fpl$ffix) + x$fpl$fflt 0x080047c8 Section 48 fflt_clz.o(x$fpl$fflt) + x$fpl$fmul 0x080047f8 Section 258 fmul.o(x$fpl$fmul) + x$fpl$fnaninf 0x080048fa Section 140 fnaninf.o(x$fpl$fnaninf) + x$fpl$fretinf 0x08004986 Section 10 fretinf.o(x$fpl$fretinf) + x$fpl$fsub 0x08004990 Section 234 faddsub_clz.o(x$fpl$fsub) + _fsub1 0x0800499f Thumb Code 0 faddsub_clz.o(x$fpl$fsub) + x$fpl$printf1 0x08004a7a Section 4 printf1.o(x$fpl$printf1) + .constdata 0x08004a7e Section 2072 oled.o(.constdata) + x$fpl$usenofp 0x08004a7e Section 0 usenofp.o(x$fpl$usenofp) + .constdata 0x08005298 Section 148 bigflt0.o(.constdata) + tenpwrs_x 0x08005298 Data 60 bigflt0.o(.constdata) + tenpwrs_i 0x080052d4 Data 64 bigflt0.o(.constdata) + locale$$data 0x0800534c Section 28 lc_numeric_c.o(locale$$data) + __lcnum_c_name 0x08005350 Data 2 lc_numeric_c.o(locale$$data) + __lcnum_c_start 0x08005358 Data 0 lc_numeric_c.o(locale$$data) + __lcnum_c_point 0x08005364 Data 0 lc_numeric_c.o(locale$$data) + __lcnum_c_thousands 0x08005366 Data 0 lc_numeric_c.o(locale$$data) + __lcnum_c_grouping 0x08005367 Data 0 lc_numeric_c.o(locale$$data) + __lcnum_c_end 0x08005368 Data 0 lc_numeric_c.o(locale$$data) + .data 0x20000000 Section 20 system_stm32f10x.o(.data) + .data 0x20000014 Section 20 stm32f10x_rcc.o(.data) + APBAHBPrescTable 0x20000014 Data 16 stm32f10x_rcc.o(.data) + ADCPrescTable 0x20000024 Data 4 stm32f10x_rcc.o(.data) + .data 0x20000028 Section 4 bsp_gpio.o(.data) + temp 0x20000028 Data 4 bsp_gpio.o(.data) + .data 0x2000002c Section 12 bsp_usart.o(.data) + .data 0x20000038 Section 4 delay.o(.data) + fac_us 0x20000038 Data 1 delay.o(.data) + fac_ms 0x2000003a Data 2 delay.o(.data) + .data 0x2000003c Section 512 oled.o(.data) + .data 0x2000023c Section 28 pid.o(.data) + LastError 0x20000248 Data 4 pid.o(.data) + PrevError 0x2000024c Data 4 pid.o(.data) + LastError 0x20000250 Data 4 pid.o(.data) + PrevError 0x20000254 Data 4 pid.o(.data) + .data 0x20000258 Section 54 car.o(.data) + .data 0x20000290 Section 12 bluetooth.o(.data) + .bss 0x2000029c Section 64 main.o(.bss) + .bss 0x200002dc Section 96 libspace.o(.bss) + HEAP 0x20000340 Section 512 startup_stm32f10x_hd.o(HEAP) + Heap_Mem 0x20000340 Data 512 startup_stm32f10x_hd.o(HEAP) + STACK 0x20000540 Section 1024 startup_stm32f10x_hd.o(STACK) + Stack_Mem 0x20000540 Data 1024 startup_stm32f10x_hd.o(STACK) + __initial_sp 0x20000940 Data 0 startup_stm32f10x_hd.o(STACK) + + Global Symbols + + Symbol Name Value Ov Type Size Object(Section) + + BuildAttributes$$THM_ISAv4$P$D$K$B$S$PE$A:L22UL41UL21$X:L11$S22US41US21$IEEE1$IW$USESV6$~STKCKD$USESV7$~SHL$OTIME$ROPI$IEEEJ$EBA8$UX$STANDARDLIB$REQ8$PRES8$EABIv2 0x00000000 Number 0 anon$$obj.o ABSOLUTE + __ARM_use_no_argv 0x00000000 Number 0 main.o ABSOLUTE + _printf_flags 0x00000000 Number 0 printf_stubs.o ABSOLUTE + _printf_return_value 0x00000000 Number 0 printf_stubs.o ABSOLUTE + _printf_sizespec 0x00000000 Number 0 printf_stubs.o ABSOLUTE + _printf_widthprec 0x00000000 Number 0 printf_stubs.o ABSOLUTE + __ARM_exceptions_init - Undefined Weak Reference + __alloca_initialize - Undefined Weak Reference + __arm_preinit_ - Undefined Weak Reference + __cpp_initialize__aeabi_ - Undefined Weak Reference + __cxa_finalize - Undefined Weak Reference + __sigvec_lookup - Undefined Weak Reference + _atexit_init - Undefined Weak Reference + _call_atexit_fns - Undefined Weak Reference + _clock_init - Undefined Weak Reference + _fp_trap_init - Undefined Weak Reference + _fp_trap_shutdown - Undefined Weak Reference + _get_lc_collate - Undefined Weak Reference + _get_lc_ctype - Undefined Weak Reference + _get_lc_monetary - Undefined Weak Reference + _get_lc_time - Undefined Weak Reference + _getenv_init - Undefined Weak Reference + _handle_redirection - Undefined Weak Reference + _init_alloc - Undefined Weak Reference + _init_user_alloc - Undefined Weak Reference + _initio - Undefined Weak Reference + _rand_init - Undefined Weak Reference + _signal_finish - Undefined Weak Reference + _signal_init - Undefined Weak Reference + _terminate_alloc - Undefined Weak Reference + _terminate_user_alloc - Undefined Weak Reference + _terminateio - Undefined Weak Reference + __Vectors_Size 0x00000130 Number 0 startup_stm32f10x_hd.o ABSOLUTE + __Vectors 0x08000000 Data 4 startup_stm32f10x_hd.o(RESET) + __Vectors_End 0x08000130 Data 0 startup_stm32f10x_hd.o(RESET) + __main 0x08000131 Thumb Code 8 __main.o(!!!main) + __scatterload 0x08000139 Thumb Code 0 __scatter.o(!!!scatter) + __scatterload_rt2 0x08000139 Thumb Code 44 __scatter.o(!!!scatter) + __scatterload_rt2_thumb_only 0x08000139 Thumb Code 0 __scatter.o(!!!scatter) + __scatterload_null 0x08000147 Thumb Code 0 __scatter.o(!!!scatter) + __decompress 0x0800016d Thumb Code 90 __dczerorl2.o(!!dczerorl2) + __decompress1 0x0800016d Thumb Code 0 __dczerorl2.o(!!dczerorl2) + __scatterload_zeroinit 0x080001c9 Thumb Code 28 __scatter_zi.o(!!handler_zi) + _printf_f 0x080001e5 Thumb Code 0 _printf_f.o(.ARM.Collect$$_printf_percent$$00000003) + _printf_percent 0x080001e5 Thumb Code 0 _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) + _printf_percent_end 0x080001eb Thumb Code 0 _printf_percent_end.o(.ARM.Collect$$_printf_percent$$00000017) + __rt_lib_init 0x080001ef Thumb Code 0 libinit.o(.ARM.Collect$$libinit$$00000000) + __rt_lib_init_fp_1 0x080001f1 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000002) + __rt_lib_init_heap_1 0x080001f1 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000000A) + __rt_lib_init_lc_common 0x080001f1 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000000F) + __rt_lib_init_preinit_1 0x080001f1 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000004) + __rt_lib_init_rand_1 0x080001f1 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000000E) + __rt_lib_init_user_alloc_1 0x080001f1 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000000C) + __rt_lib_init_lc_collate_1 0x080001f7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000011) + __rt_lib_init_lc_ctype_1 0x080001f7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000013) + __rt_lib_init_lc_monetary_1 0x080001f7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000015) + __rt_lib_init_lc_numeric_2 0x080001f7 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000016) + __rt_lib_init_alloca_1 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000002E) + __rt_lib_init_argv_1 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000002C) + __rt_lib_init_atexit_1 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000001B) + __rt_lib_init_clock_1 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000021) + __rt_lib_init_cpp_1 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000032) + __rt_lib_init_exceptions_1 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000030) + __rt_lib_init_fp_trap_1 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000001F) + __rt_lib_init_getenv_1 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000023) + __rt_lib_init_lc_numeric_1 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000017) + __rt_lib_init_lc_time_1 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000019) + __rt_lib_init_return 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000033) + __rt_lib_init_signal_1 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$0000001D) + __rt_lib_init_stdio_1 0x08000201 Thumb Code 0 libinit2.o(.ARM.Collect$$libinit$$00000025) + __rt_lib_shutdown 0x08000203 Thumb Code 0 libshutdown.o(.ARM.Collect$$libshutdown$$00000000) + __rt_lib_shutdown_cpp_1 0x08000205 Thumb Code 0 libshutdown2.o(.ARM.Collect$$libshutdown$$00000002) + __rt_lib_shutdown_fp_trap_1 0x08000205 Thumb Code 0 libshutdown2.o(.ARM.Collect$$libshutdown$$00000007) + __rt_lib_shutdown_heap_1 0x08000205 Thumb Code 0 libshutdown2.o(.ARM.Collect$$libshutdown$$0000000F) + __rt_lib_shutdown_return 0x08000205 Thumb Code 0 libshutdown2.o(.ARM.Collect$$libshutdown$$00000010) + __rt_lib_shutdown_signal_1 0x08000205 Thumb Code 0 libshutdown2.o(.ARM.Collect$$libshutdown$$0000000A) + __rt_lib_shutdown_stdio_1 0x08000205 Thumb Code 0 libshutdown2.o(.ARM.Collect$$libshutdown$$00000004) + __rt_lib_shutdown_user_alloc_1 0x08000205 Thumb Code 0 libshutdown2.o(.ARM.Collect$$libshutdown$$0000000C) + __rt_entry 0x08000207 Thumb Code 0 __rtentry.o(.ARM.Collect$$rtentry$$00000000) + __rt_entry_presh_1 0x08000207 Thumb Code 0 __rtentry2.o(.ARM.Collect$$rtentry$$00000002) + __rt_entry_sh 0x08000207 Thumb Code 0 __rtentry4.o(.ARM.Collect$$rtentry$$00000004) + __rt_entry_li 0x0800020d Thumb Code 0 __rtentry2.o(.ARM.Collect$$rtentry$$0000000A) + __rt_entry_postsh_1 0x0800020d Thumb Code 0 __rtentry2.o(.ARM.Collect$$rtentry$$00000009) + __rt_entry_main 0x08000211 Thumb Code 0 __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) + __rt_entry_postli_1 0x08000211 Thumb Code 0 __rtentry2.o(.ARM.Collect$$rtentry$$0000000C) + __rt_exit 0x08000219 Thumb Code 0 rtexit.o(.ARM.Collect$$rtexit$$00000000) + __rt_exit_ls 0x0800021b Thumb Code 0 rtexit2.o(.ARM.Collect$$rtexit$$00000003) + __rt_exit_prels_1 0x0800021b Thumb Code 0 rtexit2.o(.ARM.Collect$$rtexit$$00000002) + __rt_exit_exit 0x0800021f Thumb Code 0 rtexit2.o(.ARM.Collect$$rtexit$$00000004) + Reset_Handler 0x08000225 Thumb Code 8 startup_stm32f10x_hd.o(.text) + SysTick_Handler 0x0800023d Thumb Code 2 startup_stm32f10x_hd.o(.text) + ADC1_2_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + ADC3_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + CAN1_RX1_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + CAN1_SCE_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + DMA1_Channel1_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + DMA1_Channel2_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + DMA1_Channel3_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + DMA1_Channel4_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + DMA1_Channel5_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + DMA1_Channel6_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + DMA1_Channel7_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + DMA2_Channel1_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + DMA2_Channel2_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + DMA2_Channel3_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + DMA2_Channel4_5_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + EXTI0_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + EXTI15_10_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + EXTI1_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + EXTI2_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + EXTI3_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + EXTI4_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + EXTI9_5_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + FLASH_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + FSMC_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + I2C1_ER_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + I2C1_EV_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + I2C2_ER_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + I2C2_EV_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + PVD_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + RCC_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + RTCAlarm_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + RTC_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + SDIO_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + SPI1_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + SPI2_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + SPI3_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + TAMPER_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + TIM1_BRK_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + TIM1_CC_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + TIM1_TRG_COM_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + TIM1_UP_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + TIM3_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + TIM5_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + TIM7_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + TIM8_BRK_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + TIM8_CC_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + TIM8_TRG_COM_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + TIM8_UP_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + UART4_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + UART5_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + USART3_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + USBWakeUp_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + USB_HP_CAN1_TX_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + USB_LP_CAN1_RX0_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + WWDG_IRQHandler 0x0800023f Thumb Code 0 startup_stm32f10x_hd.o(.text) + __user_initial_stackheap 0x08000241 Thumb Code 0 startup_stm32f10x_hd.o(.text) + SystemInit 0x08000343 Thumb Code 78 system_stm32f10x.o(.text) + SystemCoreClockUpdate 0x08000391 Thumb Code 142 system_stm32f10x.o(.text) + NVIC_PriorityGroupConfig 0x08000445 Thumb Code 10 misc.o(.text) + NVIC_Init 0x0800044f Thumb Code 100 misc.o(.text) + NVIC_SetVectorTable 0x080004b3 Thumb Code 14 misc.o(.text) + NVIC_SystemLPConfig 0x080004c1 Thumb Code 34 misc.o(.text) + SysTick_CLKSourceConfig 0x080004e3 Thumb Code 40 misc.o(.text) + GPIO_DeInit 0x08000521 Thumb Code 172 stm32f10x_gpio.o(.text) + GPIO_AFIODeInit 0x080005cd Thumb Code 20 stm32f10x_gpio.o(.text) + GPIO_Init 0x080005e1 Thumb Code 278 stm32f10x_gpio.o(.text) + GPIO_StructInit 0x080006f7 Thumb Code 16 stm32f10x_gpio.o(.text) + GPIO_ReadInputDataBit 0x08000707 Thumb Code 18 stm32f10x_gpio.o(.text) + GPIO_ReadInputData 0x08000719 Thumb Code 8 stm32f10x_gpio.o(.text) + GPIO_ReadOutputDataBit 0x08000721 Thumb Code 18 stm32f10x_gpio.o(.text) + GPIO_ReadOutputData 0x08000733 Thumb Code 8 stm32f10x_gpio.o(.text) + GPIO_SetBits 0x0800073b Thumb Code 4 stm32f10x_gpio.o(.text) + GPIO_ResetBits 0x0800073f Thumb Code 4 stm32f10x_gpio.o(.text) + GPIO_WriteBit 0x08000743 Thumb Code 10 stm32f10x_gpio.o(.text) + GPIO_Write 0x0800074d Thumb Code 4 stm32f10x_gpio.o(.text) + GPIO_PinLockConfig 0x08000751 Thumb Code 18 stm32f10x_gpio.o(.text) + GPIO_EventOutputConfig 0x08000763 Thumb Code 26 stm32f10x_gpio.o(.text) + GPIO_EventOutputCmd 0x0800077d Thumb Code 6 stm32f10x_gpio.o(.text) + GPIO_PinRemapConfig 0x08000783 Thumb Code 138 stm32f10x_gpio.o(.text) + GPIO_EXTILineConfig 0x0800080d Thumb Code 66 stm32f10x_gpio.o(.text) + GPIO_ETH_MediaInterfaceConfig 0x0800084f Thumb Code 8 stm32f10x_gpio.o(.text) + RCC_DeInit 0x0800087d Thumb Code 64 stm32f10x_rcc.o(.text) + RCC_HSEConfig 0x080008bd Thumb Code 70 stm32f10x_rcc.o(.text) + RCC_GetFlagStatus 0x08000903 Thumb Code 56 stm32f10x_rcc.o(.text) + RCC_WaitForHSEStartUp 0x0800093b Thumb Code 56 stm32f10x_rcc.o(.text) + RCC_AdjustHSICalibrationValue 0x08000973 Thumb Code 20 stm32f10x_rcc.o(.text) + RCC_HSICmd 0x08000987 Thumb Code 6 stm32f10x_rcc.o(.text) + RCC_PLLConfig 0x0800098d Thumb Code 24 stm32f10x_rcc.o(.text) + RCC_PLLCmd 0x080009a5 Thumb Code 6 stm32f10x_rcc.o(.text) + RCC_SYSCLKConfig 0x080009ab Thumb Code 18 stm32f10x_rcc.o(.text) + RCC_GetSYSCLKSource 0x080009bd Thumb Code 10 stm32f10x_rcc.o(.text) + RCC_HCLKConfig 0x080009c7 Thumb Code 18 stm32f10x_rcc.o(.text) + RCC_PCLK1Config 0x080009d9 Thumb Code 18 stm32f10x_rcc.o(.text) + RCC_PCLK2Config 0x080009eb Thumb Code 20 stm32f10x_rcc.o(.text) + RCC_ITConfig 0x080009ff Thumb Code 26 stm32f10x_rcc.o(.text) + RCC_USBCLKConfig 0x08000a19 Thumb Code 8 stm32f10x_rcc.o(.text) + RCC_ADCCLKConfig 0x08000a21 Thumb Code 18 stm32f10x_rcc.o(.text) + RCC_LSEConfig 0x08000a33 Thumb Code 50 stm32f10x_rcc.o(.text) + RCC_LSICmd 0x08000a65 Thumb Code 6 stm32f10x_rcc.o(.text) + RCC_RTCCLKConfig 0x08000a6b Thumb Code 12 stm32f10x_rcc.o(.text) + RCC_RTCCLKCmd 0x08000a77 Thumb Code 8 stm32f10x_rcc.o(.text) + RCC_GetClocksFreq 0x08000a7f Thumb Code 192 stm32f10x_rcc.o(.text) + RCC_AHBPeriphClockCmd 0x08000b3f Thumb Code 26 stm32f10x_rcc.o(.text) + RCC_APB2PeriphClockCmd 0x08000b59 Thumb Code 26 stm32f10x_rcc.o(.text) + RCC_APB1PeriphClockCmd 0x08000b73 Thumb Code 26 stm32f10x_rcc.o(.text) + RCC_APB2PeriphResetCmd 0x08000b8d Thumb Code 26 stm32f10x_rcc.o(.text) + RCC_APB1PeriphResetCmd 0x08000ba7 Thumb Code 26 stm32f10x_rcc.o(.text) + RCC_BackupResetCmd 0x08000bc1 Thumb Code 8 stm32f10x_rcc.o(.text) + RCC_ClockSecuritySystemCmd 0x08000bc9 Thumb Code 6 stm32f10x_rcc.o(.text) + RCC_MCOConfig 0x08000bcf Thumb Code 6 stm32f10x_rcc.o(.text) + RCC_ClearFlag 0x08000bd5 Thumb Code 14 stm32f10x_rcc.o(.text) + RCC_GetITStatus 0x08000be3 Thumb Code 20 stm32f10x_rcc.o(.text) + RCC_ClearITPendingBit 0x08000bf7 Thumb Code 6 stm32f10x_rcc.o(.text) + TIM_DeInit 0x08000c21 Thumb Code 424 stm32f10x_tim.o(.text) + TIM_TimeBaseInit 0x08000dc9 Thumb Code 122 stm32f10x_tim.o(.text) + TIM_OC1Init 0x08000e43 Thumb Code 132 stm32f10x_tim.o(.text) + TIM_OC2Init 0x08000ec7 Thumb Code 154 stm32f10x_tim.o(.text) + TIM_OC3Init 0x08000f61 Thumb Code 150 stm32f10x_tim.o(.text) + TIM_OC4Init 0x08000ff7 Thumb Code 182 stm32f10x_tim.o(.text) + TIM_SetIC4Prescaler 0x080010ad Thumb Code 26 stm32f10x_tim.o(.text) + TIM_SetIC3Prescaler 0x08001149 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_SetIC2Prescaler 0x080011d5 Thumb Code 26 stm32f10x_tim.o(.text) + TIM_SetIC1Prescaler 0x08001271 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_ICInit 0x080012ef Thumb Code 150 stm32f10x_tim.o(.text) + TIM_PWMIConfig 0x08001385 Thumb Code 124 stm32f10x_tim.o(.text) + TIM_BDTRConfig 0x08001401 Thumb Code 32 stm32f10x_tim.o(.text) + TIM_TimeBaseStructInit 0x08001421 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_OCStructInit 0x08001433 Thumb Code 20 stm32f10x_tim.o(.text) + TIM_ICStructInit 0x08001447 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_BDTRStructInit 0x08001459 Thumb Code 40 stm32f10x_tim.o(.text) + TIM_Cmd 0x08001481 Thumb Code 24 stm32f10x_tim.o(.text) + TIM_CtrlPWMOutputs 0x08001499 Thumb Code 30 stm32f10x_tim.o(.text) + TIM_ITConfig 0x080014b7 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_GenerateEvent 0x080014c9 Thumb Code 4 stm32f10x_tim.o(.text) + TIM_DMAConfig 0x080014cd Thumb Code 10 stm32f10x_tim.o(.text) + TIM_DMACmd 0x080014d7 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_InternalClockConfig 0x080014e9 Thumb Code 12 stm32f10x_tim.o(.text) + TIM_SelectInputTrigger 0x080014f5 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_ITRxExternalClockConfig 0x08001507 Thumb Code 24 stm32f10x_tim.o(.text) + TIM_TIxExternalClockConfig 0x0800151f Thumb Code 62 stm32f10x_tim.o(.text) + TIM_ETRConfig 0x0800155d Thumb Code 28 stm32f10x_tim.o(.text) + TIM_ETRClockMode1Config 0x08001579 Thumb Code 54 stm32f10x_tim.o(.text) + TIM_ETRClockMode2Config 0x080015af Thumb Code 32 stm32f10x_tim.o(.text) + TIM_PrescalerConfig 0x080015cf Thumb Code 6 stm32f10x_tim.o(.text) + TIM_CounterModeConfig 0x080015d5 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_EncoderInterfaceConfig 0x080015e7 Thumb Code 66 stm32f10x_tim.o(.text) + TIM_ForcedOC1Config 0x08001629 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_ForcedOC2Config 0x0800163b Thumb Code 26 stm32f10x_tim.o(.text) + TIM_ForcedOC3Config 0x08001655 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_ForcedOC4Config 0x08001667 Thumb Code 26 stm32f10x_tim.o(.text) + TIM_ARRPreloadConfig 0x08001681 Thumb Code 24 stm32f10x_tim.o(.text) + TIM_SelectCOM 0x08001699 Thumb Code 24 stm32f10x_tim.o(.text) + TIM_SelectCCDMA 0x080016b1 Thumb Code 24 stm32f10x_tim.o(.text) + TIM_CCPreloadControl 0x080016c9 Thumb Code 24 stm32f10x_tim.o(.text) + TIM_OC1PreloadConfig 0x080016e1 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_OC2PreloadConfig 0x080016f3 Thumb Code 26 stm32f10x_tim.o(.text) + TIM_OC3PreloadConfig 0x0800170d Thumb Code 18 stm32f10x_tim.o(.text) + TIM_OC4PreloadConfig 0x0800171f Thumb Code 26 stm32f10x_tim.o(.text) + TIM_OC1FastConfig 0x08001739 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_OC2FastConfig 0x0800174b Thumb Code 26 stm32f10x_tim.o(.text) + TIM_OC3FastConfig 0x08001765 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_OC4FastConfig 0x08001777 Thumb Code 26 stm32f10x_tim.o(.text) + TIM_ClearOC1Ref 0x08001791 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_ClearOC2Ref 0x080017a3 Thumb Code 24 stm32f10x_tim.o(.text) + TIM_ClearOC3Ref 0x080017bb Thumb Code 18 stm32f10x_tim.o(.text) + TIM_ClearOC4Ref 0x080017cd Thumb Code 24 stm32f10x_tim.o(.text) + TIM_OC1PolarityConfig 0x080017e5 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_OC1NPolarityConfig 0x080017f7 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_OC2PolarityConfig 0x08001809 Thumb Code 26 stm32f10x_tim.o(.text) + TIM_OC2NPolarityConfig 0x08001823 Thumb Code 26 stm32f10x_tim.o(.text) + TIM_OC3PolarityConfig 0x0800183d Thumb Code 26 stm32f10x_tim.o(.text) + TIM_OC3NPolarityConfig 0x08001857 Thumb Code 26 stm32f10x_tim.o(.text) + TIM_OC4PolarityConfig 0x08001871 Thumb Code 26 stm32f10x_tim.o(.text) + TIM_CCxCmd 0x0800188b Thumb Code 30 stm32f10x_tim.o(.text) + TIM_CCxNCmd 0x080018a9 Thumb Code 30 stm32f10x_tim.o(.text) + TIM_SelectOCxM 0x080018c7 Thumb Code 82 stm32f10x_tim.o(.text) + TIM_UpdateDisableConfig 0x08001919 Thumb Code 24 stm32f10x_tim.o(.text) + TIM_UpdateRequestConfig 0x08001931 Thumb Code 24 stm32f10x_tim.o(.text) + TIM_SelectHallSensor 0x08001949 Thumb Code 24 stm32f10x_tim.o(.text) + TIM_SelectOnePulseMode 0x08001961 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_SelectOutputTrigger 0x08001973 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_SelectSlaveMode 0x08001985 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_SelectMasterSlaveMode 0x08001997 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_SetCounter 0x080019a9 Thumb Code 4 stm32f10x_tim.o(.text) + TIM_SetAutoreload 0x080019ad Thumb Code 4 stm32f10x_tim.o(.text) + TIM_SetCompare1 0x080019b1 Thumb Code 4 stm32f10x_tim.o(.text) + TIM_SetCompare2 0x080019b5 Thumb Code 4 stm32f10x_tim.o(.text) + TIM_SetCompare3 0x080019b9 Thumb Code 4 stm32f10x_tim.o(.text) + TIM_SetCompare4 0x080019bd Thumb Code 6 stm32f10x_tim.o(.text) + TIM_SetClockDivision 0x080019c3 Thumb Code 18 stm32f10x_tim.o(.text) + TIM_GetCapture1 0x080019d5 Thumb Code 6 stm32f10x_tim.o(.text) + TIM_GetCapture2 0x080019db Thumb Code 6 stm32f10x_tim.o(.text) + TIM_GetCapture3 0x080019e1 Thumb Code 6 stm32f10x_tim.o(.text) + TIM_GetCapture4 0x080019e7 Thumb Code 8 stm32f10x_tim.o(.text) + TIM_GetCounter 0x080019ef Thumb Code 6 stm32f10x_tim.o(.text) + TIM_GetPrescaler 0x080019f5 Thumb Code 6 stm32f10x_tim.o(.text) + TIM_GetFlagStatus 0x080019fb Thumb Code 18 stm32f10x_tim.o(.text) + TIM_ClearFlag 0x08001a0d Thumb Code 6 stm32f10x_tim.o(.text) + TIM_GetITStatus 0x08001a13 Thumb Code 34 stm32f10x_tim.o(.text) + TIM_ClearITPendingBit 0x08001a35 Thumb Code 6 stm32f10x_tim.o(.text) + USART_DeInit 0x08001a3d Thumb Code 134 stm32f10x_usart.o(.text) + USART_Init 0x08001ac3 Thumb Code 210 stm32f10x_usart.o(.text) + USART_StructInit 0x08001b95 Thumb Code 24 stm32f10x_usart.o(.text) + USART_ClockInit 0x08001bad Thumb Code 34 stm32f10x_usart.o(.text) + USART_ClockStructInit 0x08001bcf Thumb Code 12 stm32f10x_usart.o(.text) + USART_Cmd 0x08001bdb Thumb Code 24 stm32f10x_usart.o(.text) + USART_ITConfig 0x08001bf3 Thumb Code 74 stm32f10x_usart.o(.text) + USART_DMACmd 0x08001c3d Thumb Code 18 stm32f10x_usart.o(.text) + USART_SetAddress 0x08001c4f Thumb Code 18 stm32f10x_usart.o(.text) + USART_WakeUpConfig 0x08001c61 Thumb Code 18 stm32f10x_usart.o(.text) + USART_ReceiverWakeUpCmd 0x08001c73 Thumb Code 24 stm32f10x_usart.o(.text) + USART_LINBreakDetectLengthConfig 0x08001c8b Thumb Code 18 stm32f10x_usart.o(.text) + USART_LINCmd 0x08001c9d Thumb Code 24 stm32f10x_usart.o(.text) + USART_SendData 0x08001cb5 Thumb Code 8 stm32f10x_usart.o(.text) + USART_ReceiveData 0x08001cbd Thumb Code 10 stm32f10x_usart.o(.text) + USART_SendBreak 0x08001cc7 Thumb Code 10 stm32f10x_usart.o(.text) + USART_SetGuardTime 0x08001cd1 Thumb Code 16 stm32f10x_usart.o(.text) + USART_SetPrescaler 0x08001ce1 Thumb Code 16 stm32f10x_usart.o(.text) + USART_SmartCardCmd 0x08001cf1 Thumb Code 24 stm32f10x_usart.o(.text) + USART_SmartCardNACKCmd 0x08001d09 Thumb Code 24 stm32f10x_usart.o(.text) + USART_HalfDuplexCmd 0x08001d21 Thumb Code 24 stm32f10x_usart.o(.text) + USART_OverSampling8Cmd 0x08001d39 Thumb Code 22 stm32f10x_usart.o(.text) + USART_OneBitMethodCmd 0x08001d4f Thumb Code 24 stm32f10x_usart.o(.text) + USART_IrDAConfig 0x08001d67 Thumb Code 18 stm32f10x_usart.o(.text) + USART_IrDACmd 0x08001d79 Thumb Code 24 stm32f10x_usart.o(.text) + USART_GetFlagStatus 0x08001d91 Thumb Code 26 stm32f10x_usart.o(.text) + USART_ClearFlag 0x08001dab Thumb Code 18 stm32f10x_usart.o(.text) + USART_GetITStatus 0x08001dbd Thumb Code 84 stm32f10x_usart.o(.text) + USART_ClearITPendingBit 0x08001e11 Thumb Code 52 stm32f10x_usart.o(.text) + System_Init 0x08001e45 Thumb Code 202 bsp_sys.o(.text) + LED_GPIO_Config 0x08001f71 Thumb Code 40 bsp_gpio.o(.text) + LED_Flash 0x08001f99 Thumb Code 54 bsp_gpio.o(.text) + NVIC_Config 0x08001fd9 Thumb Code 2 bsp_nvic.o(.text) + USART1_Init 0x08001fdd Thumb Code 124 bsp_usart.o(.text) + fputc 0x08002059 Thumb Code 32 bsp_usart.o(.text) + fgetc 0x08002079 Thumb Code 26 bsp_usart.o(.text) + USART1_Send 0x08002093 Thumb Code 74 bsp_usart.o(.text) + USART1_Receive 0x080020dd Thumb Code 16 bsp_usart.o(.text) + USART1_IRQHandler 0x080020ed Thumb Code 72 bsp_usart.o(.text) + Delay_Init 0x08002149 Thumb Code 52 delay.o(.text) + Delay_ms 0x0800217d Thumb Code 56 delay.o(.text) + Delay_us 0x080021b5 Thumb Code 56 delay.o(.text) + i2c_Delay 0x080021f5 Thumb Code 14 bsp_iic.o(.text) + IIC_Start 0x08002203 Thumb Code 56 bsp_iic.o(.text) + IIC_Stop 0x0800223b Thumb Code 38 bsp_iic.o(.text) + IIC_Send_Byte 0x08002261 Thumb Code 96 bsp_iic.o(.text) + IIC_Ack 0x080022c1 Thumb Code 56 bsp_iic.o(.text) + IIC_NAck 0x080022f9 Thumb Code 46 bsp_iic.o(.text) + IIC_Read_Byte 0x08002327 Thumb Code 82 bsp_iic.o(.text) + IIC_Wait_Ack 0x08002379 Thumb Code 66 bsp_iic.o(.text) + IIC_Init 0x080023bb Thumb Code 44 bsp_iic.o(.text) + i2c_CheckDevice 0x080023e7 Thumb Code 32 bsp_iic.o(.text) + MOTO_PWM_Init 0x0800240d Thumb Code 196 bsp_timer.o(.text) + MOTO_PWM_Out 0x080024d1 Thumb Code 68 bsp_timer.o(.text) + Timer6_Init 0x08002515 Thumb Code 114 bsp_timer.o(.text) + Encoder_Init_TIM2 0x08002587 Thumb Code 154 bsp_timer.o(.text) + Encoder_Init_TIM4 0x08002621 Thumb Code 148 bsp_timer.o(.text) + Read_Encoder 0x080026b5 Thumb Code 84 bsp_timer.o(.text) + TIM4_IRQHandler 0x08002709 Thumb Code 24 bsp_timer.o(.text) + TIM2_IRQHandler 0x08002721 Thumb Code 24 bsp_timer.o(.text) + MOTO_GPIO_Init 0x0800274d Thumb Code 40 moto.o(.text) + MOTO_Left 0x08002775 Thumb Code 92 moto.o(.text) + MOTO_Right 0x080027d1 Thumb Code 62 moto.o(.text) + Car_Go 0x0800280f Thumb Code 16 moto.o(.text) + Car_Back 0x0800281f Thumb Code 16 moto.o(.text) + Car_Turn_Left 0x0800282f Thumb Code 16 moto.o(.text) + Car_Turn_Right 0x0800283f Thumb Code 16 moto.o(.text) + Car_Stop 0x0800284f Thumb Code 16 moto.o(.text) + Write_IIC_Command 0x08002869 Thumb Code 44 oled.o(.text) + Write_IIC_Data 0x08002895 Thumb Code 44 oled.o(.text) + OLED_WR_Byte 0x080028c1 Thumb Code 24 oled.o(.text) + fill_picture 0x080028d9 Thumb Code 64 oled.o(.text) + Delay_50ms 0x08002919 Thumb Code 22 oled.o(.text) + Delay_1ms 0x0800292f Thumb Code 26 oled.o(.text) + OLED_Set_Pos 0x08002949 Thumb Code 40 oled.o(.text) + OLED_Display_On 0x08002971 Thumb Code 28 oled.o(.text) + OLED_Display_Off 0x0800298d Thumb Code 28 oled.o(.text) + OLED_Clear 0x080029a9 Thumb Code 62 oled.o(.text) + OLED_On 0x080029e7 Thumb Code 62 oled.o(.text) + OLED_ShowChar 0x08002a25 Thumb Code 154 oled.o(.text) + oled_pow 0x08002abf Thumb Code 22 oled.o(.text) + OLED_ShowNum 0x08002ad5 Thumb Code 136 oled.o(.text) + OLED_ShowString 0x08002b5d Thumb Code 58 oled.o(.text) + OLED_ShowCHinese 0x08002b97 Thumb Code 98 oled.o(.text) + OLED_DrawBMP 0x08002bf9 Thumb Code 118 oled.o(.text) + OLED_Init 0x08002c6f Thumb Code 232 oled.o(.text) + showPID 0x08002d65 Thumb Code 118 pid.o(.text) + PID_Calc_Left 0x08002ddb Thumb Code 114 pid.o(.text) + PID_Calc_Right 0x08002e4d Thumb Code 114 pid.o(.text) + TIM6_IRQHandler 0x08002ee5 Thumb Code 490 car.o(.text) + Bluetooth_Init 0x08003119 Thumb Code 162 bluetooth.o(.text) + USART2_Send 0x080031bb Thumb Code 74 bluetooth.o(.text) + USART2_Receive 0x08003205 Thumb Code 16 bluetooth.o(.text) + USART2_IRQHandler 0x08003215 Thumb Code 72 bluetooth.o(.text) + main 0x08003271 Thumb Code 190 main.o(.text) + NMI_Handler 0x08003335 Thumb Code 2 stm32f10x_it.o(.text) + HardFault_Handler 0x08003337 Thumb Code 4 stm32f10x_it.o(.text) + MemManage_Handler 0x0800333b Thumb Code 4 stm32f10x_it.o(.text) + BusFault_Handler 0x0800333f Thumb Code 4 stm32f10x_it.o(.text) + UsageFault_Handler 0x08003343 Thumb Code 4 stm32f10x_it.o(.text) + SVC_Handler 0x08003347 Thumb Code 2 stm32f10x_it.o(.text) + DebugMon_Handler 0x08003349 Thumb Code 2 stm32f10x_it.o(.text) + PendSV_Handler 0x0800334b Thumb Code 2 stm32f10x_it.o(.text) + __2sprintf 0x0800334d Thumb Code 34 noretval__2sprintf.o(.text) + _printf_pre_padding 0x08003375 Thumb Code 44 _printf_pad.o(.text) + _printf_post_padding 0x080033a1 Thumb Code 34 _printf_pad.o(.text) + __printf 0x080033c3 Thumb Code 270 __printf_wp.o(.text) + __use_two_region_memory 0x080034d1 Thumb Code 2 heapauxi.o(.text) + __rt_heap_escrow$2region 0x080034d3 Thumb Code 2 heapauxi.o(.text) + __rt_heap_expand$2region 0x080034d5 Thumb Code 2 heapauxi.o(.text) + __lib_sel_fp_printf 0x080034d7 Thumb Code 2 _printf_fp_dec.o(.text) + _printf_fp_dec_real 0x08003685 Thumb Code 620 _printf_fp_dec.o(.text) + _printf_char_common 0x080038fb Thumb Code 32 _printf_char_common.o(.text) + _sputc 0x08003921 Thumb Code 10 _sputc.o(.text) + __rt_locale 0x0800392d Thumb Code 8 rt_locale_intlibspace.o(.text) + _ll_udiv10 0x08003935 Thumb Code 138 lludiv10.o(.text) + _printf_fp_infnan 0x080039c1 Thumb Code 112 _printf_fp_infnan.o(.text) + _btod_etento 0x08003a41 Thumb Code 216 bigflt0.o(.text) + __user_libspace 0x08003b1d Thumb Code 8 libspace.o(.text) + __user_perproc_libspace 0x08003b1d Thumb Code 0 libspace.o(.text) + __user_perthread_libspace 0x08003b1d Thumb Code 0 libspace.o(.text) + __user_setup_stackheap 0x08003b25 Thumb Code 74 sys_stackheap_outer.o(.text) + exit 0x08003b6f Thumb Code 18 exit.o(.text) + strcmp 0x08003b81 Thumb Code 128 strcmpv7m.o(.text) + _sys_exit 0x08003c01 Thumb Code 8 sys_exit.o(.text) + __I$use$semihosting 0x08003c0d Thumb Code 0 use_no_semi.o(.text) + __use_no_semihosting_swi 0x08003c0d Thumb Code 2 use_no_semi.o(.text) + __semihosting_library_function 0x08003c0f Thumb Code 0 indicate_semi.o(.text) + _btod_d2e 0x08003c0f Thumb Code 62 btod.o(CL$$btod_d2e) + _d2e_denorm_low 0x08003c4d Thumb Code 70 btod.o(CL$$btod_d2e_denorm_low) + _d2e_norm_op1 0x08003c93 Thumb Code 96 btod.o(CL$$btod_d2e_norm_op1) + __btod_div_common 0x08003cf3 Thumb Code 696 btod.o(CL$$btod_div_common) + _e2e 0x0800402b Thumb Code 198 btod.o(CL$$btod_e2e) + _btod_ediv 0x080040f1 Thumb Code 40 btod.o(CL$$btod_ediv) + _btod_emul 0x08004119 Thumb Code 40 btod.o(CL$$btod_emul) + __btod_mult_common 0x08004141 Thumb Code 580 btod.o(CL$$btod_mult_common) + __ARM_fpclassify 0x08004385 Thumb Code 40 fpclassify.o(i.__ARM_fpclassify) + _is_digit 0x080043ad Thumb Code 14 __printf_wp.o(i._is_digit) + _get_lc_numeric 0x080043bd Thumb Code 44 lc_numeric_c.o(locale$$code) + __aeabi_d2f 0x080043e9 Thumb Code 0 d2f.o(x$fpl$d2f) + _d2f 0x080043e9 Thumb Code 98 d2f.o(x$fpl$d2f) + __aeabi_i2d 0x0800444b Thumb Code 0 dflt_clz.o(x$fpl$dflt) + _dflt 0x0800444b Thumb Code 46 dflt_clz.o(x$fpl$dflt) + __aeabi_dmul 0x08004479 Thumb Code 0 dmul.o(x$fpl$dmul) + _dmul 0x08004479 Thumb Code 332 dmul.o(x$fpl$dmul) + __fpl_dnaninf 0x080045cd Thumb Code 156 dnaninf.o(x$fpl$dnaninf) + __fpl_dretinf 0x08004669 Thumb Code 12 dretinf.o(x$fpl$dretinf) + __aeabi_f2d 0x08004675 Thumb Code 0 f2d.o(x$fpl$f2d) + _f2d 0x08004675 Thumb Code 86 f2d.o(x$fpl$f2d) + __aeabi_fadd 0x080046cd Thumb Code 0 faddsub_clz.o(x$fpl$fadd) + _fadd 0x080046cd Thumb Code 196 faddsub_clz.o(x$fpl$fadd) + __aeabi_f2iz 0x08004791 Thumb Code 0 ffix.o(x$fpl$ffix) + _ffix 0x08004791 Thumb Code 54 ffix.o(x$fpl$ffix) + __aeabi_i2f 0x080047c9 Thumb Code 0 fflt_clz.o(x$fpl$fflt) + _fflt 0x080047c9 Thumb Code 48 fflt_clz.o(x$fpl$fflt) + __aeabi_fmul 0x080047f9 Thumb Code 0 fmul.o(x$fpl$fmul) + _fmul 0x080047f9 Thumb Code 258 fmul.o(x$fpl$fmul) + __fpl_fnaninf 0x080048fb Thumb Code 140 fnaninf.o(x$fpl$fnaninf) + __fpl_fretinf 0x08004987 Thumb Code 10 fretinf.o(x$fpl$fretinf) + __aeabi_fsub 0x08004991 Thumb Code 0 faddsub_clz.o(x$fpl$fsub) + _fsub 0x08004991 Thumb Code 234 faddsub_clz.o(x$fpl$fsub) + _printf_fp_dec 0x08004a7b Thumb Code 4 printf1.o(x$fpl$printf1) + F6x8 0x08004a7e Data 552 oled.o(.constdata) + __I$use$fp 0x08004a7e Number 0 usenofp.o(x$fpl$usenofp) + F8X16 0x08004ca6 Data 1520 oled.o(.constdata) + Region$$Table$$Base 0x0800532c Number 0 anon$$obj.o(Region$$Table) + Region$$Table$$Limit 0x0800534c Number 0 anon$$obj.o(Region$$Table) + SystemCoreClock 0x20000000 Data 4 system_stm32f10x.o(.data) + AHBPrescTable 0x20000004 Data 16 system_stm32f10x.o(.data) + rx_address 0x2000002c Data 4 bsp_usart.o(.data) + rx_count 0x20000030 Data 4 bsp_usart.o(.data) + rx_length 0x20000034 Data 4 bsp_usart.o(.data) + Hzk 0x2000003c Data 512 oled.o(.data) + Proportion 0x2000023c Data 4 pid.o(.data) + Integral 0x20000240 Data 4 pid.o(.data) + Derivative 0x20000244 Data 4 pid.o(.data) + Encoder_Left 0x20000258 Data 4 car.o(.data) + Encoder_Right 0x2000025c Data 4 car.o(.data) + Moto_Left 0x20000260 Data 4 car.o(.data) + Moto_Right 0x20000264 Data 4 car.o(.data) + para_L 0x20000268 Data 4 car.o(.data) + para_R 0x2000026c Data 4 car.o(.data) + SetPoint 0x20000270 Data 4 car.o(.data) + temp1 0x20000274 Data 4 car.o(.data) + temp2 0x20000278 Data 4 car.o(.data) + temp3 0x2000027c Data 4 car.o(.data) + temp4 0x20000280 Data 4 car.o(.data) + set_speed 0x20000284 Data 5 car.o(.data) + speed 0x20000289 Data 5 car.o(.data) + rx2_address 0x20000290 Data 4 bluetooth.o(.data) + rx2_count 0x20000294 Data 4 bluetooth.o(.data) + rx2_length 0x20000298 Data 4 bluetooth.o(.data) + BLE_RX 0x2000029c Data 64 main.o(.bss) + __libspace_start 0x200002dc Data 96 libspace.o(.bss) + __temporary_stack_top$libspace 0x2000033c Data 0 libspace.o(.bss) + + + +============================================================================== + +Memory Map of the image + + Image Entry point : 0x08000131 + + Load Region LR_IROM1 (Base: 0x08000000, Size: 0x00005604, Max: 0x00040000, ABSOLUTE, COMPRESSED[0x0000546c]) + + Execution Region ER_IROM1 (Base: 0x08000000, Size: 0x00005368, Max: 0x00040000, ABSOLUTE) + + Base Addr Size Type Attr Idx E Section Name Object + + 0x08000000 0x00000130 Data RO 3 RESET startup_stm32f10x_hd.o + 0x08000130 0x00000008 Code RO 685 * !!!main c_w.l(__main.o) + 0x08000138 0x00000034 Code RO 937 !!!scatter c_w.l(__scatter.o) + 0x0800016c 0x0000005a Code RO 935 !!dczerorl2 c_w.l(__dczerorl2.o) + 0x080001c6 0x00000002 PAD + 0x080001c8 0x0000001c Code RO 939 !!handler_zi c_w.l(__scatter_zi.o) + 0x080001e4 0x00000000 Code RO 682 .ARM.Collect$$_printf_percent$$00000000 c_w.l(_printf_percent.o) + 0x080001e4 0x00000006 Code RO 681 .ARM.Collect$$_printf_percent$$00000003 c_w.l(_printf_f.o) + 0x080001ea 0x00000004 Code RO 726 .ARM.Collect$$_printf_percent$$00000017 c_w.l(_printf_percent_end.o) + 0x080001ee 0x00000002 Code RO 808 .ARM.Collect$$libinit$$00000000 c_w.l(libinit.o) + 0x080001f0 0x00000000 Code RO 810 .ARM.Collect$$libinit$$00000002 c_w.l(libinit2.o) + 0x080001f0 0x00000000 Code RO 812 .ARM.Collect$$libinit$$00000004 c_w.l(libinit2.o) + 0x080001f0 0x00000000 Code RO 815 .ARM.Collect$$libinit$$0000000A c_w.l(libinit2.o) + 0x080001f0 0x00000000 Code RO 817 .ARM.Collect$$libinit$$0000000C c_w.l(libinit2.o) + 0x080001f0 0x00000000 Code RO 819 .ARM.Collect$$libinit$$0000000E c_w.l(libinit2.o) + 0x080001f0 0x00000006 Code RO 820 .ARM.Collect$$libinit$$0000000F c_w.l(libinit2.o) + 0x080001f6 0x00000000 Code RO 822 .ARM.Collect$$libinit$$00000011 c_w.l(libinit2.o) + 0x080001f6 0x00000000 Code RO 824 .ARM.Collect$$libinit$$00000013 c_w.l(libinit2.o) + 0x080001f6 0x00000000 Code RO 826 .ARM.Collect$$libinit$$00000015 c_w.l(libinit2.o) + 0x080001f6 0x0000000a Code RO 827 .ARM.Collect$$libinit$$00000016 c_w.l(libinit2.o) + 0x08000200 0x00000000 Code RO 828 .ARM.Collect$$libinit$$00000017 c_w.l(libinit2.o) + 0x08000200 0x00000000 Code RO 830 .ARM.Collect$$libinit$$00000019 c_w.l(libinit2.o) + 0x08000200 0x00000000 Code RO 832 .ARM.Collect$$libinit$$0000001B c_w.l(libinit2.o) + 0x08000200 0x00000000 Code RO 834 .ARM.Collect$$libinit$$0000001D c_w.l(libinit2.o) + 0x08000200 0x00000000 Code RO 836 .ARM.Collect$$libinit$$0000001F c_w.l(libinit2.o) + 0x08000200 0x00000000 Code RO 838 .ARM.Collect$$libinit$$00000021 c_w.l(libinit2.o) + 0x08000200 0x00000000 Code RO 840 .ARM.Collect$$libinit$$00000023 c_w.l(libinit2.o) + 0x08000200 0x00000000 Code RO 842 .ARM.Collect$$libinit$$00000025 c_w.l(libinit2.o) + 0x08000200 0x00000000 Code RO 846 .ARM.Collect$$libinit$$0000002C c_w.l(libinit2.o) + 0x08000200 0x00000000 Code RO 848 .ARM.Collect$$libinit$$0000002E c_w.l(libinit2.o) + 0x08000200 0x00000000 Code RO 850 .ARM.Collect$$libinit$$00000030 c_w.l(libinit2.o) + 0x08000200 0x00000000 Code RO 852 .ARM.Collect$$libinit$$00000032 c_w.l(libinit2.o) + 0x08000200 0x00000002 Code RO 853 .ARM.Collect$$libinit$$00000033 c_w.l(libinit2.o) + 0x08000202 0x00000002 Code RO 883 .ARM.Collect$$libshutdown$$00000000 c_w.l(libshutdown.o) + 0x08000204 0x00000000 Code RO 894 .ARM.Collect$$libshutdown$$00000002 c_w.l(libshutdown2.o) + 0x08000204 0x00000000 Code RO 896 .ARM.Collect$$libshutdown$$00000004 c_w.l(libshutdown2.o) + 0x08000204 0x00000000 Code RO 899 .ARM.Collect$$libshutdown$$00000007 c_w.l(libshutdown2.o) + 0x08000204 0x00000000 Code RO 902 .ARM.Collect$$libshutdown$$0000000A c_w.l(libshutdown2.o) + 0x08000204 0x00000000 Code RO 904 .ARM.Collect$$libshutdown$$0000000C c_w.l(libshutdown2.o) + 0x08000204 0x00000000 Code RO 907 .ARM.Collect$$libshutdown$$0000000F c_w.l(libshutdown2.o) + 0x08000204 0x00000002 Code RO 908 .ARM.Collect$$libshutdown$$00000010 c_w.l(libshutdown2.o) + 0x08000206 0x00000000 Code RO 719 .ARM.Collect$$rtentry$$00000000 c_w.l(__rtentry.o) + 0x08000206 0x00000000 Code RO 737 .ARM.Collect$$rtentry$$00000002 c_w.l(__rtentry2.o) + 0x08000206 0x00000006 Code RO 749 .ARM.Collect$$rtentry$$00000004 c_w.l(__rtentry4.o) + 0x0800020c 0x00000000 Code RO 739 .ARM.Collect$$rtentry$$00000009 c_w.l(__rtentry2.o) + 0x0800020c 0x00000004 Code RO 740 .ARM.Collect$$rtentry$$0000000A c_w.l(__rtentry2.o) + 0x08000210 0x00000000 Code RO 742 .ARM.Collect$$rtentry$$0000000C c_w.l(__rtentry2.o) + 0x08000210 0x00000008 Code RO 743 .ARM.Collect$$rtentry$$0000000D c_w.l(__rtentry2.o) + 0x08000218 0x00000002 Code RO 854 .ARM.Collect$$rtexit$$00000000 c_w.l(rtexit.o) + 0x0800021a 0x00000000 Code RO 861 .ARM.Collect$$rtexit$$00000002 c_w.l(rtexit2.o) + 0x0800021a 0x00000004 Code RO 862 .ARM.Collect$$rtexit$$00000003 c_w.l(rtexit2.o) + 0x0800021e 0x00000006 Code RO 863 .ARM.Collect$$rtexit$$00000004 c_w.l(rtexit2.o) + 0x08000224 0x00000040 Code RO 4 .text startup_stm32f10x_hd.o + 0x08000264 0x000001e0 Code RO 24 .text system_stm32f10x.o + 0x08000444 0x000000dc Code RO 118 .text misc.o + 0x08000520 0x0000035c Code RO 269 .text stm32f10x_gpio.o + 0x0800087c 0x000003a4 Code RO 317 .text stm32f10x_rcc.o + 0x08000c20 0x00000e1a Code RO 367 .text stm32f10x_tim.o + 0x08001a3a 0x00000002 PAD + 0x08001a3c 0x00000408 Code RO 379 .text stm32f10x_usart.o + 0x08001e44 0x0000012c Code RO 403 .text bsp_sys.o + 0x08001f70 0x00000068 Code RO 455 .text bsp_gpio.o + 0x08001fd8 0x00000002 Code RO 468 .text bsp_nvic.o + 0x08001fda 0x00000002 PAD + 0x08001fdc 0x0000016c Code RO 480 .text bsp_usart.o + 0x08002148 0x000000ac Code RO 495 .text delay.o + 0x080021f4 0x00000218 Code RO 509 .text bsp_iic.o + 0x0800240c 0x00000340 Code RO 521 .text bsp_timer.o + 0x0800274c 0x0000011c Code RO 533 .text moto.o + 0x08002868 0x000004fc Code RO 545 .text oled.o + 0x08002d64 0x00000180 Code RO 570 .text pid.o + 0x08002ee4 0x00000234 Code RO 585 .text car.o + 0x08003118 0x00000158 Code RO 603 .text bluetooth.o + 0x08003270 0x000000c4 Code RO 621 .text main.o + 0x08003334 0x00000018 Code RO 636 .text stm32f10x_it.o + 0x0800334c 0x00000028 Code RO 655 .text c_w.l(noretval__2sprintf.o) + 0x08003374 0x0000004e Code RO 659 .text c_w.l(_printf_pad.o) + 0x080033c2 0x0000010e Code RO 669 .text c_w.l(__printf_wp.o) + 0x080034d0 0x00000006 Code RO 683 .text c_w.l(heapauxi.o) + 0x080034d6 0x0000041a Code RO 720 .text c_w.l(_printf_fp_dec.o) + 0x080038f0 0x00000030 Code RO 722 .text c_w.l(_printf_char_common.o) + 0x08003920 0x0000000a Code RO 724 .text c_w.l(_sputc.o) + 0x0800392a 0x00000002 PAD + 0x0800392c 0x00000008 Code RO 754 .text c_w.l(rt_locale_intlibspace.o) + 0x08003934 0x0000008a Code RO 756 .text c_w.l(lludiv10.o) + 0x080039be 0x00000002 PAD + 0x080039c0 0x00000080 Code RO 758 .text c_w.l(_printf_fp_infnan.o) + 0x08003a40 0x000000dc Code RO 762 .text c_w.l(bigflt0.o) + 0x08003b1c 0x00000008 Code RO 794 .text c_w.l(libspace.o) + 0x08003b24 0x0000004a Code RO 797 .text c_w.l(sys_stackheap_outer.o) + 0x08003b6e 0x00000012 Code RO 799 .text c_w.l(exit.o) + 0x08003b80 0x00000080 Code RO 801 .text c_w.l(strcmpv7m.o) + 0x08003c00 0x0000000c Code RO 873 .text c_w.l(sys_exit.o) + 0x08003c0c 0x00000002 Code RO 884 .text c_w.l(use_no_semi.o) + 0x08003c0e 0x00000000 Code RO 886 .text c_w.l(indicate_semi.o) + 0x08003c0e 0x0000003e Code RO 765 CL$$btod_d2e c_w.l(btod.o) + 0x08003c4c 0x00000046 Code RO 767 CL$$btod_d2e_denorm_low c_w.l(btod.o) + 0x08003c92 0x00000060 Code RO 766 CL$$btod_d2e_norm_op1 c_w.l(btod.o) + 0x08003cf2 0x00000338 Code RO 775 CL$$btod_div_common c_w.l(btod.o) + 0x0800402a 0x000000c6 Code RO 772 CL$$btod_e2e c_w.l(btod.o) + 0x080040f0 0x00000028 Code RO 769 CL$$btod_ediv c_w.l(btod.o) + 0x08004118 0x00000028 Code RO 768 CL$$btod_emul c_w.l(btod.o) + 0x08004140 0x00000244 Code RO 774 CL$$btod_mult_common c_w.l(btod.o) + 0x08004384 0x00000028 Code RO 792 i.__ARM_fpclassify m_ws.l(fpclassify.o) + 0x080043ac 0x0000000e Code RO 671 i._is_digit c_w.l(__printf_wp.o) + 0x080043ba 0x00000002 PAD + 0x080043bc 0x0000002c Code RO 788 locale$$code c_w.l(lc_numeric_c.o) + 0x080043e8 0x00000062 Code RO 687 x$fpl$d2f fz_ws.l(d2f.o) + 0x0800444a 0x0000002e Code RO 690 x$fpl$dflt fz_ws.l(dflt_clz.o) + 0x08004478 0x00000154 Code RO 695 x$fpl$dmul fz_ws.l(dmul.o) + 0x080045cc 0x0000009c Code RO 727 x$fpl$dnaninf fz_ws.l(dnaninf.o) + 0x08004668 0x0000000c Code RO 729 x$fpl$dretinf fz_ws.l(dretinf.o) + 0x08004674 0x00000056 Code RO 697 x$fpl$f2d fz_ws.l(f2d.o) + 0x080046ca 0x00000002 PAD + 0x080046cc 0x000000c4 Code RO 699 x$fpl$fadd fz_ws.l(faddsub_clz.o) + 0x08004790 0x00000036 Code RO 705 x$fpl$ffix fz_ws.l(ffix.o) + 0x080047c6 0x00000002 PAD + 0x080047c8 0x00000030 Code RO 710 x$fpl$fflt fz_ws.l(fflt_clz.o) + 0x080047f8 0x00000102 Code RO 715 x$fpl$fmul fz_ws.l(fmul.o) + 0x080048fa 0x0000008c Code RO 731 x$fpl$fnaninf fz_ws.l(fnaninf.o) + 0x08004986 0x0000000a Code RO 733 x$fpl$fretinf fz_ws.l(fretinf.o) + 0x08004990 0x000000ea Code RO 701 x$fpl$fsub fz_ws.l(faddsub_clz.o) + 0x08004a7a 0x00000004 Code RO 717 x$fpl$printf1 fz_ws.l(printf1.o) + 0x08004a7e 0x00000000 Code RO 735 x$fpl$usenofp fz_ws.l(usenofp.o) + 0x08004a7e 0x00000818 Data RO 546 .constdata oled.o + 0x08005296 0x00000002 PAD + 0x08005298 0x00000094 Data RO 763 .constdata c_w.l(bigflt0.o) + 0x0800532c 0x00000020 Data RO 933 Region$$Table anon$$obj.o + 0x0800534c 0x0000001c Data RO 787 locale$$data c_w.l(lc_numeric_c.o) + + + Execution Region RW_IRAM1 (Base: 0x20000000, Size: 0x00000940, Max: 0x0000c000, ABSOLUTE, COMPRESSED[0x00000104]) + + Base Addr Size Type Attr Idx E Section Name Object + + 0x20000000 0x00000014 Data RW 25 .data system_stm32f10x.o + 0x20000014 0x00000014 Data RW 318 .data stm32f10x_rcc.o + 0x20000028 0x00000004 Data RW 456 .data bsp_gpio.o + 0x2000002c 0x0000000c Data RW 481 .data bsp_usart.o + 0x20000038 0x00000004 Data RW 496 .data delay.o + 0x2000003c 0x00000200 Data RW 547 .data oled.o + 0x2000023c 0x0000001c Data RW 571 .data pid.o + 0x20000258 0x00000036 Data RW 586 .data car.o + 0x2000028e 0x00000002 PAD + 0x20000290 0x0000000c Data RW 604 .data bluetooth.o + 0x2000029c 0x00000040 Zero RW 622 .bss main.o + 0x200002dc 0x00000060 Zero RW 795 .bss c_w.l(libspace.o) + 0x2000033c 0x00000004 PAD + 0x20000340 0x00000200 Zero RW 2 HEAP startup_stm32f10x_hd.o + 0x20000540 0x00000400 Zero RW 1 STACK startup_stm32f10x_hd.o + + +============================================================================== + +Image component sizes + + + Code (inc. data) RO Data RW Data ZI Data Debug Object Name + + 344 20 0 12 0 1773 bluetooth.o + 104 10 0 4 0 712 bsp_gpio.o + 536 6 0 0 0 2166 bsp_iic.o + 2 0 0 0 0 438 bsp_nvic.o + 300 98 0 0 0 1878 bsp_sys.o + 832 20 0 0 0 2494 bsp_timer.o + 364 20 0 12 0 2079 bsp_usart.o + 564 74 0 54 0 1759 car.o + 0 0 0 0 0 4532 core_cm3.o + 172 8 0 4 0 1119 delay.o + 196 6 0 0 64 1276 main.o + 220 22 0 0 0 1861 misc.o + 284 10 0 0 0 1528 moto.o + 1276 14 2072 512 0 6216 oled.o + 384 38 0 28 0 1644 pid.o + 64 26 304 0 1536 900 startup_stm32f10x_hd.o + 860 38 0 0 0 5793 stm32f10x_gpio.o + 24 0 0 0 0 1142 stm32f10x_it.o + 932 36 0 20 0 9004 stm32f10x_rcc.o + 3610 88 0 0 0 22904 stm32f10x_tim.o + 1032 22 0 0 0 8520 stm32f10x_usart.o + 480 38 0 20 0 250495 system_stm32f10x.o + + ---------------------------------------------------------------------- + 12584 594 2410 668 1600 330233 Object Totals + 0 0 32 0 0 0 (incl. Generated) + 4 0 2 2 0 0 (incl. Padding) + + ---------------------------------------------------------------------- + + Code (inc. data) RO Data RW Data ZI Data Debug Library Member Name + + 90 0 0 0 0 0 __dczerorl2.o + 8 0 0 0 0 68 __main.o + 284 0 0 0 0 156 __printf_wp.o + 0 0 0 0 0 0 __rtentry.o + 12 0 0 0 0 0 __rtentry2.o + 6 0 0 0 0 0 __rtentry4.o + 52 8 0 0 0 0 __scatter.o + 28 0 0 0 0 0 __scatter_zi.o + 48 6 0 0 0 96 _printf_char_common.o + 6 0 0 0 0 0 _printf_f.o + 1050 0 0 0 0 216 _printf_fp_dec.o + 128 16 0 0 0 84 _printf_fp_infnan.o + 78 0 0 0 0 108 _printf_pad.o + 0 0 0 0 0 0 _printf_percent.o + 4 0 0 0 0 0 _printf_percent_end.o + 10 0 0 0 0 68 _sputc.o + 220 4 148 0 0 96 bigflt0.o + 1910 128 0 0 0 672 btod.o + 18 0 0 0 0 80 exit.o + 6 0 0 0 0 152 heapauxi.o + 0 0 0 0 0 0 indicate_semi.o + 44 10 28 0 0 76 lc_numeric_c.o + 2 0 0 0 0 0 libinit.o + 18 0 0 0 0 0 libinit2.o + 2 0 0 0 0 0 libshutdown.o + 2 0 0 0 0 0 libshutdown2.o + 8 4 0 0 96 68 libspace.o + 138 0 0 0 0 80 lludiv10.o + 40 6 0 0 0 84 noretval__2sprintf.o + 8 4 0 0 0 68 rt_locale_intlibspace.o + 2 0 0 0 0 0 rtexit.o + 10 0 0 0 0 0 rtexit2.o + 128 0 0 0 0 68 strcmpv7m.o + 12 4 0 0 0 68 sys_exit.o + 74 0 0 0 0 80 sys_stackheap_outer.o + 2 0 0 0 0 68 use_no_semi.o + 98 4 0 0 0 92 d2f.o + 46 0 0 0 0 68 dflt_clz.o + 340 12 0 0 0 104 dmul.o + 156 4 0 0 0 92 dnaninf.o + 12 0 0 0 0 68 dretinf.o + 86 4 0 0 0 84 f2d.o + 430 8 0 0 0 168 faddsub_clz.o + 54 4 0 0 0 84 ffix.o + 48 0 0 0 0 68 fflt_clz.o + 258 4 0 0 0 84 fmul.o + 140 4 0 0 0 84 fnaninf.o + 10 0 0 0 0 68 fretinf.o + 4 0 0 0 0 68 printf1.o + 0 0 0 0 0 0 usenofp.o + 40 0 0 0 0 68 fpclassify.o + + ---------------------------------------------------------------------- + 6182 234 176 0 100 3656 Library Totals + 12 0 0 0 4 0 (incl. Padding) + + ---------------------------------------------------------------------- + + Code (inc. data) RO Data RW Data ZI Data Debug Library Name + + 4448 190 176 0 96 2456 c_w.l + 1682 44 0 0 0 1132 fz_ws.l + 40 0 0 0 0 68 m_ws.l + + ---------------------------------------------------------------------- + 6182 234 176 0 100 3656 Library Totals + + ---------------------------------------------------------------------- + +============================================================================== + + + Code (inc. data) RO Data RW Data ZI Data Debug + + 18766 828 2586 668 1700 330349 Grand Totals + 18766 828 2586 260 1700 330349 ELF Image Totals (compressed) + 18766 828 2586 260 0 0 ROM Totals + +============================================================================== + + Total RO Size (Code + RO Data) 21352 ( 20.85kB) + Total RW Size (RW Data + ZI Data) 2368 ( 2.31kB) + Total ROM Size (Code + RO Data + RW Data) 21612 ( 21.11kB) + +============================================================================== + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Listing/startup_stm32f10x_hd.lst b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Listing/startup_stm32f10x_hd.lst new file mode 100644 index 0000000..8e2884e --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Listing/startup_stm32f10x_hd.lst @@ -0,0 +1,1469 @@ + + + +ARM Macro Assembler Page 1 + + + 1 00000000 ;******************** (C) COPYRIGHT 2011 STMicroelectron + ics ******************** + 2 00000000 ;* File Name : startup_stm32f10x_hd.s + 3 00000000 ;* Author : MCD Application Team + 4 00000000 ;* Version : V3.5.0 + 5 00000000 ;* Date : 11-March-2011 + 6 00000000 ;* Description : STM32F10x High Density Devices v + ector table for MDK-ARM + 7 00000000 ;* toolchain. + 8 00000000 ;* This module performs: + 9 00000000 ;* - Set the initial SP + 10 00000000 ;* - Set the initial PC == Reset_Ha + ndler + 11 00000000 ;* - Set the vector table entries w + ith the exceptions ISR address + 12 00000000 ;* - Configure the clock system and + also configure the external + 13 00000000 ;* SRAM mounted on STM3210E-EVAL + board to be used as data + 14 00000000 ;* memory (optional, to be enable + d by user) + 15 00000000 ;* - Branches to __main in the C li + brary (which eventually + 16 00000000 ;* calls main()). + 17 00000000 ;* After Reset the CortexM3 process + or is in Thread mode, + 18 00000000 ;* priority is Privileged, and the + Stack is set to Main. + 19 00000000 ;* <<< Use Configuration Wizard in Context Menu >>> + 20 00000000 ;******************************************************* + ************************ + 21 00000000 ; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS A + T PROVIDING CUSTOMERS + 22 00000000 ; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN OR + DER FOR THEM TO SAVE TIME. + 23 00000000 ; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIAB + LE FOR ANY DIRECT, + 24 00000000 ; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY + CLAIMS ARISING FROM THE + 25 00000000 ; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOM + ERS OF THE CODING + 26 00000000 ; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR + PRODUCTS. + 27 00000000 ;******************************************************* + ************************ + 28 00000000 + 29 00000000 ; Amount of memory (in bytes) allocated for Stack + 30 00000000 ; Tailor this value to your application needs + 31 00000000 ; Stack Configuration + 32 00000000 ; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> + 33 00000000 ; + 34 00000000 + 35 00000000 00000400 + Stack_Size + EQU 0x00000400 + 36 00000000 + 37 00000000 AREA STACK, NOINIT, READWRITE, ALIGN +=3 + 38 00000000 Stack_Mem + + + +ARM Macro Assembler Page 2 + + + SPACE Stack_Size + 39 00000400 __initial_sp + 40 00000400 + 41 00000400 ; Heap Configuration + 42 00000400 ; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> + 43 00000400 ; + 44 00000400 + 45 00000400 00000200 + Heap_Size + EQU 0x00000200 + 46 00000400 + 47 00000400 AREA HEAP, NOINIT, READWRITE, ALIGN= +3 + 48 00000000 __heap_base + 49 00000000 Heap_Mem + SPACE Heap_Size + 50 00000200 __heap_limit + 51 00000200 + 52 00000200 PRESERVE8 + 53 00000200 THUMB + 54 00000200 + 55 00000200 + 56 00000200 ; Vector Table Mapped to Address 0 at Reset + 57 00000200 AREA RESET, DATA, READONLY + 58 00000000 EXPORT __Vectors + 59 00000000 EXPORT __Vectors_End + 60 00000000 EXPORT __Vectors_Size + 61 00000000 + 62 00000000 00000000 + __Vectors + DCD __initial_sp ; Top of Stack + 63 00000004 00000000 DCD Reset_Handler ; Reset Handler + 64 00000008 00000000 DCD NMI_Handler ; NMI Handler + 65 0000000C 00000000 DCD HardFault_Handler ; Hard Fault + Handler + 66 00000010 00000000 DCD MemManage_Handler + ; MPU Fault Handler + + 67 00000014 00000000 DCD BusFault_Handler + ; Bus Fault Handler + + 68 00000018 00000000 DCD UsageFault_Handler ; Usage Faul + t Handler + 69 0000001C 00000000 DCD 0 ; Reserved + 70 00000020 00000000 DCD 0 ; Reserved + 71 00000024 00000000 DCD 0 ; Reserved + 72 00000028 00000000 DCD 0 ; Reserved + 73 0000002C 00000000 DCD SVC_Handler ; SVCall Handler + 74 00000030 00000000 DCD DebugMon_Handler ; Debug Monito + r Handler + 75 00000034 00000000 DCD 0 ; Reserved + 76 00000038 00000000 DCD PendSV_Handler ; PendSV Handler + + 77 0000003C 00000000 DCD SysTick_Handler + ; SysTick Handler + 78 00000040 + 79 00000040 ; External Interrupts + 80 00000040 00000000 DCD WWDG_IRQHandler + ; Window Watchdog + + + +ARM Macro Assembler Page 3 + + + 81 00000044 00000000 DCD PVD_IRQHandler ; PVD through EX + TI Line detect + 82 00000048 00000000 DCD TAMPER_IRQHandler ; Tamper + 83 0000004C 00000000 DCD RTC_IRQHandler ; RTC + 84 00000050 00000000 DCD FLASH_IRQHandler ; Flash + 85 00000054 00000000 DCD RCC_IRQHandler ; RCC + 86 00000058 00000000 DCD EXTI0_IRQHandler ; EXTI Line 0 + 87 0000005C 00000000 DCD EXTI1_IRQHandler ; EXTI Line 1 + 88 00000060 00000000 DCD EXTI2_IRQHandler ; EXTI Line 2 + 89 00000064 00000000 DCD EXTI3_IRQHandler ; EXTI Line 3 + 90 00000068 00000000 DCD EXTI4_IRQHandler ; EXTI Line 4 + 91 0000006C 00000000 DCD DMA1_Channel1_IRQHandler + ; DMA1 Channel 1 + 92 00000070 00000000 DCD DMA1_Channel2_IRQHandler + ; DMA1 Channel 2 + 93 00000074 00000000 DCD DMA1_Channel3_IRQHandler + ; DMA1 Channel 3 + 94 00000078 00000000 DCD DMA1_Channel4_IRQHandler + ; DMA1 Channel 4 + 95 0000007C 00000000 DCD DMA1_Channel5_IRQHandler + ; DMA1 Channel 5 + 96 00000080 00000000 DCD DMA1_Channel6_IRQHandler + ; DMA1 Channel 6 + 97 00000084 00000000 DCD DMA1_Channel7_IRQHandler + ; DMA1 Channel 7 + 98 00000088 00000000 DCD ADC1_2_IRQHandler ; ADC1 & ADC2 + + 99 0000008C 00000000 DCD USB_HP_CAN1_TX_IRQHandler ; USB + High Priority or C + AN1 TX + 100 00000090 00000000 DCD USB_LP_CAN1_RX0_IRQHandler ; US + B Low Priority or + CAN1 RX0 + 101 00000094 00000000 DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + 102 00000098 00000000 DCD CAN1_SCE_IRQHandler ; CAN1 SCE + 103 0000009C 00000000 DCD EXTI9_5_IRQHandler + ; EXTI Line 9..5 + 104 000000A0 00000000 DCD TIM1_BRK_IRQHandler + ; TIM1 Break + 105 000000A4 00000000 DCD TIM1_UP_IRQHandler + ; TIM1 Update + 106 000000A8 00000000 DCD TIM1_TRG_COM_IRQHandler ; TIM1 + Trigger and Commuta + tion + 107 000000AC 00000000 DCD TIM1_CC_IRQHandler ; TIM1 Captu + re Compare + 108 000000B0 00000000 DCD TIM2_IRQHandler ; TIM2 + 109 000000B4 00000000 DCD TIM3_IRQHandler ; TIM3 + 110 000000B8 00000000 DCD TIM4_IRQHandler ; TIM4 + 111 000000BC 00000000 DCD I2C1_EV_IRQHandler ; I2C1 Event + + 112 000000C0 00000000 DCD I2C1_ER_IRQHandler ; I2C1 Error + + 113 000000C4 00000000 DCD I2C2_EV_IRQHandler ; I2C2 Event + + 114 000000C8 00000000 DCD I2C2_ER_IRQHandler ; I2C2 Error + + 115 000000CC 00000000 DCD SPI1_IRQHandler ; SPI1 + 116 000000D0 00000000 DCD SPI2_IRQHandler ; SPI2 + + + +ARM Macro Assembler Page 4 + + + 117 000000D4 00000000 DCD USART1_IRQHandler ; USART1 + 118 000000D8 00000000 DCD USART2_IRQHandler ; USART2 + 119 000000DC 00000000 DCD USART3_IRQHandler ; USART3 + 120 000000E0 00000000 DCD EXTI15_10_IRQHandler + ; EXTI Line 15..10 + 121 000000E4 00000000 DCD RTCAlarm_IRQHandler ; RTC Alarm + through EXTI Line + 122 000000E8 00000000 DCD USBWakeUp_IRQHandler ; USB Wake + up from suspend + 123 000000EC 00000000 DCD TIM8_BRK_IRQHandler + ; TIM8 Break + 124 000000F0 00000000 DCD TIM8_UP_IRQHandler + ; TIM8 Update + 125 000000F4 00000000 DCD TIM8_TRG_COM_IRQHandler ; TIM8 + Trigger and Commuta + tion + 126 000000F8 00000000 DCD TIM8_CC_IRQHandler ; TIM8 Captu + re Compare + 127 000000FC 00000000 DCD ADC3_IRQHandler ; ADC3 + 128 00000100 00000000 DCD FSMC_IRQHandler ; FSMC + 129 00000104 00000000 DCD SDIO_IRQHandler ; SDIO + 130 00000108 00000000 DCD TIM5_IRQHandler ; TIM5 + 131 0000010C 00000000 DCD SPI3_IRQHandler ; SPI3 + 132 00000110 00000000 DCD UART4_IRQHandler ; UART4 + 133 00000114 00000000 DCD UART5_IRQHandler ; UART5 + 134 00000118 00000000 DCD TIM6_IRQHandler ; TIM6 + 135 0000011C 00000000 DCD TIM7_IRQHandler ; TIM7 + 136 00000120 00000000 DCD DMA2_Channel1_IRQHandler + ; DMA2 Channel1 + 137 00000124 00000000 DCD DMA2_Channel2_IRQHandler + ; DMA2 Channel2 + 138 00000128 00000000 DCD DMA2_Channel3_IRQHandler + ; DMA2 Channel3 + 139 0000012C 00000000 DCD DMA2_Channel4_5_IRQHandler ; DM + A2 Channel4 & Chann + el5 + 140 00000130 __Vectors_End + 141 00000130 + 142 00000130 00000130 + __Vectors_Size + EQU __Vectors_End - __Vectors + 143 00000130 + 144 00000130 AREA |.text|, CODE, READONLY + 145 00000000 + 146 00000000 ; Reset handler + 147 00000000 Reset_Handler + PROC + 148 00000000 EXPORT Reset_Handler [WEAK +] + 149 00000000 IMPORT __main + 150 00000000 IMPORT SystemInit + 151 00000000 4809 LDR R0, =SystemInit + 152 00000002 4780 BLX R0 + 153 00000004 4809 LDR R0, =__main + 154 00000006 4700 BX R0 + 155 00000008 ENDP + 156 00000008 + 157 00000008 ; Dummy Exception Handlers (infinite loops which can be + modified) + + + +ARM Macro Assembler Page 5 + + + 158 00000008 + 159 00000008 NMI_Handler + PROC + 160 00000008 EXPORT NMI_Handler [WEA +K] + 161 00000008 E7FE B . + 162 0000000A ENDP + 164 0000000A HardFault_Handler + PROC + 165 0000000A EXPORT HardFault_Handler [WEA +K] + 166 0000000A E7FE B . + 167 0000000C ENDP + 169 0000000C MemManage_Handler + PROC + 170 0000000C EXPORT MemManage_Handler [WEA +K] + 171 0000000C E7FE B . + 172 0000000E ENDP + 174 0000000E BusFault_Handler + PROC + 175 0000000E EXPORT BusFault_Handler [WEA +K] + 176 0000000E E7FE B . + 177 00000010 ENDP + 179 00000010 UsageFault_Handler + PROC + 180 00000010 EXPORT UsageFault_Handler [WEA +K] + 181 00000010 E7FE B . + 182 00000012 ENDP + 183 00000012 SVC_Handler + PROC + 184 00000012 EXPORT SVC_Handler [WEA +K] + 185 00000012 E7FE B . + 186 00000014 ENDP + 188 00000014 DebugMon_Handler + PROC + 189 00000014 EXPORT DebugMon_Handler [WEA +K] + 190 00000014 E7FE B . + 191 00000016 ENDP + 192 00000016 PendSV_Handler + PROC + 193 00000016 EXPORT PendSV_Handler [WEA +K] + 194 00000016 E7FE B . + 195 00000018 ENDP + 196 00000018 SysTick_Handler + PROC + 197 00000018 EXPORT SysTick_Handler [WEA +K] + 198 00000018 E7FE B . + 199 0000001A ENDP + 200 0000001A + 201 0000001A Default_Handler + PROC + 202 0000001A + + + +ARM Macro Assembler Page 6 + + + 203 0000001A EXPORT WWDG_IRQHandler [WEA +K] + 204 0000001A EXPORT PVD_IRQHandler [WEA +K] + 205 0000001A EXPORT TAMPER_IRQHandler [WEA +K] + 206 0000001A EXPORT RTC_IRQHandler [WEA +K] + 207 0000001A EXPORT FLASH_IRQHandler [WEA +K] + 208 0000001A EXPORT RCC_IRQHandler [WEA +K] + 209 0000001A EXPORT EXTI0_IRQHandler [WEA +K] + 210 0000001A EXPORT EXTI1_IRQHandler [WEA +K] + 211 0000001A EXPORT EXTI2_IRQHandler [WEA +K] + 212 0000001A EXPORT EXTI3_IRQHandler [WEA +K] + 213 0000001A EXPORT EXTI4_IRQHandler [WEA +K] + 214 0000001A EXPORT DMA1_Channel1_IRQHandler [WEA +K] + 215 0000001A EXPORT DMA1_Channel2_IRQHandler [WEA +K] + 216 0000001A EXPORT DMA1_Channel3_IRQHandler [WEA +K] + 217 0000001A EXPORT DMA1_Channel4_IRQHandler [WEA +K] + 218 0000001A EXPORT DMA1_Channel5_IRQHandler [WEA +K] + 219 0000001A EXPORT DMA1_Channel6_IRQHandler [WEA +K] + 220 0000001A EXPORT DMA1_Channel7_IRQHandler [WEA +K] + 221 0000001A EXPORT ADC1_2_IRQHandler [WEA +K] + 222 0000001A EXPORT USB_HP_CAN1_TX_IRQHandler [WEA +K] + 223 0000001A EXPORT USB_LP_CAN1_RX0_IRQHandler [WEA +K] + 224 0000001A EXPORT CAN1_RX1_IRQHandler [WEA +K] + 225 0000001A EXPORT CAN1_SCE_IRQHandler [WEA +K] + 226 0000001A EXPORT EXTI9_5_IRQHandler [WEA +K] + 227 0000001A EXPORT TIM1_BRK_IRQHandler [WEA +K] + 228 0000001A EXPORT TIM1_UP_IRQHandler [WEA +K] + 229 0000001A EXPORT TIM1_TRG_COM_IRQHandler [WEA +K] + 230 0000001A EXPORT TIM1_CC_IRQHandler [WEA +K] + 231 0000001A EXPORT TIM2_IRQHandler [WEA +K] + 232 0000001A EXPORT TIM3_IRQHandler [WEA + + + +ARM Macro Assembler Page 7 + + +K] + 233 0000001A EXPORT TIM4_IRQHandler [WEA +K] + 234 0000001A EXPORT I2C1_EV_IRQHandler [WEA +K] + 235 0000001A EXPORT I2C1_ER_IRQHandler [WEA +K] + 236 0000001A EXPORT I2C2_EV_IRQHandler [WEA +K] + 237 0000001A EXPORT I2C2_ER_IRQHandler [WEA +K] + 238 0000001A EXPORT SPI1_IRQHandler [WEA +K] + 239 0000001A EXPORT SPI2_IRQHandler [WEA +K] + 240 0000001A EXPORT USART1_IRQHandler [WEA +K] + 241 0000001A EXPORT USART2_IRQHandler [WEA +K] + 242 0000001A EXPORT USART3_IRQHandler [WEA +K] + 243 0000001A EXPORT EXTI15_10_IRQHandler [WEA +K] + 244 0000001A EXPORT RTCAlarm_IRQHandler [WEA +K] + 245 0000001A EXPORT USBWakeUp_IRQHandler [WEA +K] + 246 0000001A EXPORT TIM8_BRK_IRQHandler [WEA +K] + 247 0000001A EXPORT TIM8_UP_IRQHandler [WEA +K] + 248 0000001A EXPORT TIM8_TRG_COM_IRQHandler [WEA +K] + 249 0000001A EXPORT TIM8_CC_IRQHandler [WEA +K] + 250 0000001A EXPORT ADC3_IRQHandler [WEA +K] + 251 0000001A EXPORT FSMC_IRQHandler [WEA +K] + 252 0000001A EXPORT SDIO_IRQHandler [WEA +K] + 253 0000001A EXPORT TIM5_IRQHandler [WEA +K] + 254 0000001A EXPORT SPI3_IRQHandler [WEA +K] + 255 0000001A EXPORT UART4_IRQHandler [WEA +K] + 256 0000001A EXPORT UART5_IRQHandler [WEA +K] + 257 0000001A EXPORT TIM6_IRQHandler [WEA +K] + 258 0000001A EXPORT TIM7_IRQHandler [WEA +K] + 259 0000001A EXPORT DMA2_Channel1_IRQHandler [WEA +K] + 260 0000001A EXPORT DMA2_Channel2_IRQHandler [WEA +K] + 261 0000001A EXPORT DMA2_Channel3_IRQHandler [WEA +K] + + + +ARM Macro Assembler Page 8 + + + 262 0000001A EXPORT DMA2_Channel4_5_IRQHandler [WEA +K] + 263 0000001A + 264 0000001A WWDG_IRQHandler + 265 0000001A PVD_IRQHandler + 266 0000001A TAMPER_IRQHandler + 267 0000001A RTC_IRQHandler + 268 0000001A FLASH_IRQHandler + 269 0000001A RCC_IRQHandler + 270 0000001A EXTI0_IRQHandler + 271 0000001A EXTI1_IRQHandler + 272 0000001A EXTI2_IRQHandler + 273 0000001A EXTI3_IRQHandler + 274 0000001A EXTI4_IRQHandler + 275 0000001A DMA1_Channel1_IRQHandler + 276 0000001A DMA1_Channel2_IRQHandler + 277 0000001A DMA1_Channel3_IRQHandler + 278 0000001A DMA1_Channel4_IRQHandler + 279 0000001A DMA1_Channel5_IRQHandler + 280 0000001A DMA1_Channel6_IRQHandler + 281 0000001A DMA1_Channel7_IRQHandler + 282 0000001A ADC1_2_IRQHandler + 283 0000001A USB_HP_CAN1_TX_IRQHandler + 284 0000001A USB_LP_CAN1_RX0_IRQHandler + 285 0000001A CAN1_RX1_IRQHandler + 286 0000001A CAN1_SCE_IRQHandler + 287 0000001A EXTI9_5_IRQHandler + 288 0000001A TIM1_BRK_IRQHandler + 289 0000001A TIM1_UP_IRQHandler + 290 0000001A TIM1_TRG_COM_IRQHandler + 291 0000001A TIM1_CC_IRQHandler + 292 0000001A TIM2_IRQHandler + 293 0000001A TIM3_IRQHandler + 294 0000001A TIM4_IRQHandler + 295 0000001A I2C1_EV_IRQHandler + 296 0000001A I2C1_ER_IRQHandler + 297 0000001A I2C2_EV_IRQHandler + 298 0000001A I2C2_ER_IRQHandler + 299 0000001A SPI1_IRQHandler + 300 0000001A SPI2_IRQHandler + 301 0000001A USART1_IRQHandler + 302 0000001A USART2_IRQHandler + 303 0000001A USART3_IRQHandler + 304 0000001A EXTI15_10_IRQHandler + 305 0000001A RTCAlarm_IRQHandler + 306 0000001A USBWakeUp_IRQHandler + 307 0000001A TIM8_BRK_IRQHandler + 308 0000001A TIM8_UP_IRQHandler + 309 0000001A TIM8_TRG_COM_IRQHandler + 310 0000001A TIM8_CC_IRQHandler + 311 0000001A ADC3_IRQHandler + 312 0000001A FSMC_IRQHandler + 313 0000001A SDIO_IRQHandler + 314 0000001A TIM5_IRQHandler + 315 0000001A SPI3_IRQHandler + 316 0000001A UART4_IRQHandler + 317 0000001A UART5_IRQHandler + 318 0000001A TIM6_IRQHandler + 319 0000001A TIM7_IRQHandler + + + +ARM Macro Assembler Page 9 + + + 320 0000001A DMA2_Channel1_IRQHandler + 321 0000001A DMA2_Channel2_IRQHandler + 322 0000001A DMA2_Channel3_IRQHandler + 323 0000001A DMA2_Channel4_5_IRQHandler + 324 0000001A E7FE B . + 325 0000001C + 326 0000001C ENDP + 327 0000001C + 328 0000001C ALIGN + 329 0000001C + 330 0000001C ;******************************************************* + ************************ + 331 0000001C ; User Stack and Heap initialization + 332 0000001C ;******************************************************* + ************************ + 333 0000001C IF :DEF:__MICROLIB + 340 0000001C + 341 0000001C IMPORT __use_two_region_memory + 342 0000001C EXPORT __user_initial_stackheap + 343 0000001C + 344 0000001C __user_initial_stackheap + 345 0000001C + 346 0000001C 4804 LDR R0, = Heap_Mem + 347 0000001E 4905 LDR R1, =(Stack_Mem + Stack_Size) + 348 00000020 4A05 LDR R2, = (Heap_Mem + Heap_Size) + 349 00000022 4B06 LDR R3, = Stack_Mem + 350 00000024 4770 BX LR + 351 00000026 + 352 00000026 00 00 ALIGN + 353 00000028 + 354 00000028 ENDIF + 355 00000028 + 356 00000028 END + 00000000 + 00000000 + 00000000 + 00000400 + 00000200 + 00000000 +Command Line: --debug --xref --diag_suppress=9931 --cpu=Cortex-M3 --apcs=interw +ork --depend=..\output\startup_stm32f10x_hd.d -o..\output\startup_stm32f10x_hd. +o -I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Fir +mware v1.0\Project\RTE" -I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\ +1.1.0\Device\Include" -I"D:\Program Files\Keilv5\ARM\CMSIS\Include" --predefine +="__UVISION_VERSION SETA 521" --predefine="STM32F10X_HD SETA 1" --list=..\listi +ng\startup_stm32f10x_hd.lst ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +STACK 00000000 + +Symbol: STACK + Definitions + At line 37 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: STACK unused +Stack_Mem 00000000 + +Symbol: Stack_Mem + Definitions + At line 38 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 347 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 349 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +__initial_sp 00000400 + +Symbol: __initial_sp + Definitions + At line 39 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 62 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s +Comment: __initial_sp used once +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +HEAP 00000000 + +Symbol: HEAP + Definitions + At line 47 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: HEAP unused +Heap_Mem 00000000 + +Symbol: Heap_Mem + Definitions + At line 49 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 346 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 348 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +__heap_base 00000000 + +Symbol: __heap_base + Definitions + At line 48 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: __heap_base unused +__heap_limit 00000200 + +Symbol: __heap_limit + Definitions + At line 50 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: __heap_limit unused +4 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +RESET 00000000 + +Symbol: RESET + Definitions + At line 57 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: RESET unused +__Vectors 00000000 + +Symbol: __Vectors + Definitions + At line 62 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 58 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 142 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +__Vectors_End 00000130 + +Symbol: __Vectors_End + Definitions + At line 140 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 59 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 142 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +.text 00000000 + +Symbol: .text + Definitions + At line 144 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: .text unused +ADC1_2_IRQHandler 0000001A + +Symbol: ADC1_2_IRQHandler + Definitions + At line 282 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 98 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 221 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +ADC3_IRQHandler 0000001A + +Symbol: ADC3_IRQHandler + Definitions + At line 311 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 127 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 250 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +BusFault_Handler 0000000E + +Symbol: BusFault_Handler + Definitions + At line 174 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 67 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 175 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +CAN1_RX1_IRQHandler 0000001A + +Symbol: CAN1_RX1_IRQHandler + Definitions + At line 285 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 101 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 224 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +CAN1_SCE_IRQHandler 0000001A + +Symbol: CAN1_SCE_IRQHandler + Definitions + At line 286 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 102 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 225 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel1_IRQHandler 0000001A + +Symbol: DMA1_Channel1_IRQHandler + Definitions + At line 275 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + + + +ARM Macro Assembler Page 2 Alphabetic symbol ordering +Relocatable symbols + + At line 91 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 214 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel2_IRQHandler 0000001A + +Symbol: DMA1_Channel2_IRQHandler + Definitions + At line 276 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 92 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 215 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel3_IRQHandler 0000001A + +Symbol: DMA1_Channel3_IRQHandler + Definitions + At line 277 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 93 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 216 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel4_IRQHandler 0000001A + +Symbol: DMA1_Channel4_IRQHandler + Definitions + At line 278 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 94 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 217 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel5_IRQHandler 0000001A + +Symbol: DMA1_Channel5_IRQHandler + Definitions + At line 279 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 95 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 218 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel6_IRQHandler 0000001A + +Symbol: DMA1_Channel6_IRQHandler + Definitions + At line 280 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 96 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 219 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +DMA1_Channel7_IRQHandler 0000001A + +Symbol: DMA1_Channel7_IRQHandler + Definitions + At line 281 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 97 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 220 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +DMA2_Channel1_IRQHandler 0000001A + + + + +ARM Macro Assembler Page 3 Alphabetic symbol ordering +Relocatable symbols + +Symbol: DMA2_Channel1_IRQHandler + Definitions + At line 320 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 136 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 259 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +DMA2_Channel2_IRQHandler 0000001A + +Symbol: DMA2_Channel2_IRQHandler + Definitions + At line 321 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 137 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 260 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +DMA2_Channel3_IRQHandler 0000001A + +Symbol: DMA2_Channel3_IRQHandler + Definitions + At line 322 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 138 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 261 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +DMA2_Channel4_5_IRQHandler 0000001A + +Symbol: DMA2_Channel4_5_IRQHandler + Definitions + At line 323 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 139 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 262 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +DebugMon_Handler 00000014 + +Symbol: DebugMon_Handler + Definitions + At line 188 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 74 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 189 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +Default_Handler 0000001A + +Symbol: Default_Handler + Definitions + At line 201 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: Default_Handler unused +EXTI0_IRQHandler 0000001A + +Symbol: EXTI0_IRQHandler + Definitions + At line 270 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 86 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 209 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + + + +ARM Macro Assembler Page 4 Alphabetic symbol ordering +Relocatable symbols + + +EXTI15_10_IRQHandler 0000001A + +Symbol: EXTI15_10_IRQHandler + Definitions + At line 304 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 120 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 243 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +EXTI1_IRQHandler 0000001A + +Symbol: EXTI1_IRQHandler + Definitions + At line 271 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 87 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 210 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +EXTI2_IRQHandler 0000001A + +Symbol: EXTI2_IRQHandler + Definitions + At line 272 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 88 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 211 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +EXTI3_IRQHandler 0000001A + +Symbol: EXTI3_IRQHandler + Definitions + At line 273 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 89 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 212 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +EXTI4_IRQHandler 0000001A + +Symbol: EXTI4_IRQHandler + Definitions + At line 274 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 90 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 213 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +EXTI9_5_IRQHandler 0000001A + +Symbol: EXTI9_5_IRQHandler + Definitions + At line 287 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 103 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 226 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +FLASH_IRQHandler 0000001A + +Symbol: FLASH_IRQHandler + Definitions + + + +ARM Macro Assembler Page 5 Alphabetic symbol ordering +Relocatable symbols + + At line 268 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 84 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 207 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +FSMC_IRQHandler 0000001A + +Symbol: FSMC_IRQHandler + Definitions + At line 312 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 128 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 251 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +HardFault_Handler 0000000A + +Symbol: HardFault_Handler + Definitions + At line 164 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 65 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 165 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +I2C1_ER_IRQHandler 0000001A + +Symbol: I2C1_ER_IRQHandler + Definitions + At line 296 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 112 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 235 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +I2C1_EV_IRQHandler 0000001A + +Symbol: I2C1_EV_IRQHandler + Definitions + At line 295 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 111 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 234 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +I2C2_ER_IRQHandler 0000001A + +Symbol: I2C2_ER_IRQHandler + Definitions + At line 298 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 114 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 237 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +I2C2_EV_IRQHandler 0000001A + +Symbol: I2C2_EV_IRQHandler + Definitions + At line 297 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 113 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 236 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + + + + +ARM Macro Assembler Page 6 Alphabetic symbol ordering +Relocatable symbols + +MemManage_Handler 0000000C + +Symbol: MemManage_Handler + Definitions + At line 169 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 66 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 170 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +NMI_Handler 00000008 + +Symbol: NMI_Handler + Definitions + At line 159 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 64 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 160 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +PVD_IRQHandler 0000001A + +Symbol: PVD_IRQHandler + Definitions + At line 265 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 81 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 204 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +PendSV_Handler 00000016 + +Symbol: PendSV_Handler + Definitions + At line 192 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 76 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 193 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +RCC_IRQHandler 0000001A + +Symbol: RCC_IRQHandler + Definitions + At line 269 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 85 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 208 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +RTCAlarm_IRQHandler 0000001A + +Symbol: RTCAlarm_IRQHandler + Definitions + At line 305 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 121 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 244 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +RTC_IRQHandler 0000001A + +Symbol: RTC_IRQHandler + Definitions + At line 267 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + + + +ARM Macro Assembler Page 7 Alphabetic symbol ordering +Relocatable symbols + + Uses + At line 83 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 206 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +Reset_Handler 00000000 + +Symbol: Reset_Handler + Definitions + At line 147 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 63 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 148 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +SDIO_IRQHandler 0000001A + +Symbol: SDIO_IRQHandler + Definitions + At line 313 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 129 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 252 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +SPI1_IRQHandler 0000001A + +Symbol: SPI1_IRQHandler + Definitions + At line 299 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 115 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 238 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +SPI2_IRQHandler 0000001A + +Symbol: SPI2_IRQHandler + Definitions + At line 300 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 116 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 239 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +SPI3_IRQHandler 0000001A + +Symbol: SPI3_IRQHandler + Definitions + At line 315 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 131 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 254 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +SVC_Handler 00000012 + +Symbol: SVC_Handler + Definitions + At line 183 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 73 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 184 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +SysTick_Handler 00000018 + + + +ARM Macro Assembler Page 8 Alphabetic symbol ordering +Relocatable symbols + + +Symbol: SysTick_Handler + Definitions + At line 196 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 77 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 197 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TAMPER_IRQHandler 0000001A + +Symbol: TAMPER_IRQHandler + Definitions + At line 266 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 82 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 205 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM1_BRK_IRQHandler 0000001A + +Symbol: TIM1_BRK_IRQHandler + Definitions + At line 288 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 104 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 227 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM1_CC_IRQHandler 0000001A + +Symbol: TIM1_CC_IRQHandler + Definitions + At line 291 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 107 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 230 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM1_TRG_COM_IRQHandler 0000001A + +Symbol: TIM1_TRG_COM_IRQHandler + Definitions + At line 290 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 106 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 229 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM1_UP_IRQHandler 0000001A + +Symbol: TIM1_UP_IRQHandler + Definitions + At line 289 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 105 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 228 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM2_IRQHandler 0000001A + +Symbol: TIM2_IRQHandler + Definitions + At line 292 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + + + +ARM Macro Assembler Page 9 Alphabetic symbol ordering +Relocatable symbols + + At line 108 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 231 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM3_IRQHandler 0000001A + +Symbol: TIM3_IRQHandler + Definitions + At line 293 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 109 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 232 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM4_IRQHandler 0000001A + +Symbol: TIM4_IRQHandler + Definitions + At line 294 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 110 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 233 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM5_IRQHandler 0000001A + +Symbol: TIM5_IRQHandler + Definitions + At line 314 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 130 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 253 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM6_IRQHandler 0000001A + +Symbol: TIM6_IRQHandler + Definitions + At line 318 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 134 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 257 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM7_IRQHandler 0000001A + +Symbol: TIM7_IRQHandler + Definitions + At line 319 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 135 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 258 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM8_BRK_IRQHandler 0000001A + +Symbol: TIM8_BRK_IRQHandler + Definitions + At line 307 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 123 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 246 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM8_CC_IRQHandler 0000001A + + + + +ARM Macro Assembler Page 10 Alphabetic symbol ordering +Relocatable symbols + +Symbol: TIM8_CC_IRQHandler + Definitions + At line 310 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 126 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 249 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM8_TRG_COM_IRQHandler 0000001A + +Symbol: TIM8_TRG_COM_IRQHandler + Definitions + At line 309 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 125 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 248 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +TIM8_UP_IRQHandler 0000001A + +Symbol: TIM8_UP_IRQHandler + Definitions + At line 308 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 124 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 247 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +UART4_IRQHandler 0000001A + +Symbol: UART4_IRQHandler + Definitions + At line 316 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 132 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 255 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +UART5_IRQHandler 0000001A + +Symbol: UART5_IRQHandler + Definitions + At line 317 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 133 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 256 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +USART1_IRQHandler 0000001A + +Symbol: USART1_IRQHandler + Definitions + At line 301 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 117 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 240 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +USART2_IRQHandler 0000001A + +Symbol: USART2_IRQHandler + Definitions + At line 302 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 118 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + + + +ARM Macro Assembler Page 11 Alphabetic symbol ordering +Relocatable symbols + + At line 241 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +USART3_IRQHandler 0000001A + +Symbol: USART3_IRQHandler + Definitions + At line 303 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 119 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 242 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +USBWakeUp_IRQHandler 0000001A + +Symbol: USBWakeUp_IRQHandler + Definitions + At line 306 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 122 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 245 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +USB_HP_CAN1_TX_IRQHandler 0000001A + +Symbol: USB_HP_CAN1_TX_IRQHandler + Definitions + At line 283 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 99 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 222 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +USB_LP_CAN1_RX0_IRQHandler 0000001A + +Symbol: USB_LP_CAN1_RX0_IRQHandler + Definitions + At line 284 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 100 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 223 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +UsageFault_Handler 00000010 + +Symbol: UsageFault_Handler + Definitions + At line 179 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 68 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 180 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +WWDG_IRQHandler 0000001A + +Symbol: WWDG_IRQHandler + Definitions + At line 264 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 80 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 203 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +__user_initial_stackheap 0000001C + +Symbol: __user_initial_stackheap + + + +ARM Macro Assembler Page 12 Alphabetic symbol ordering +Relocatable symbols + + Definitions + At line 344 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 342 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s +Comment: __user_initial_stackheap used once +73 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Absolute symbols + +Heap_Size 00000200 + +Symbol: Heap_Size + Definitions + At line 45 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 49 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 348 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +Stack_Size 00000400 + +Symbol: Stack_Size + Definitions + At line 35 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 38 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + At line 347 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + +__Vectors_Size 00000130 + +Symbol: __Vectors_Size + Definitions + At line 142 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 60 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s +Comment: __Vectors_Size used once +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +External symbols + +SystemInit 00000000 + +Symbol: SystemInit + Definitions + At line 150 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 151 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s +Comment: SystemInit used once +__main 00000000 + +Symbol: __main + Definitions + At line 149 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + At line 153 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s +Comment: __main used once +__use_two_region_memory 00000000 + +Symbol: __use_two_region_memory + Definitions + At line 341 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s + Uses + None +Comment: __use_two_region_memory unused +3 symbols +425 symbols in table diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Listing/startup_stm32f10x_ld.lst b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Listing/startup_stm32f10x_ld.lst new file mode 100644 index 0000000..3f0dab7 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Listing/startup_stm32f10x_ld.lst @@ -0,0 +1,1140 @@ + + + +ARM Macro Assembler Page 1 + + + 1 00000000 ;******************** (C) COPYRIGHT 2011 STMicroelectron + ics ******************** + 2 00000000 ;* File Name : startup_stm32f10x_ld.s + 3 00000000 ;* Author : MCD Application Team + 4 00000000 ;* Version : V3.5.0 + 5 00000000 ;* Date : 11-March-2011 + 6 00000000 ;* Description : STM32F10x Low Density Devices ve + ctor table for MDK-ARM + 7 00000000 ;* toolchain. + 8 00000000 ;* This module performs: + 9 00000000 ;* - Set the initial SP + 10 00000000 ;* - Set the initial PC == Reset_Ha + ndler + 11 00000000 ;* - Set the vector table entries w + ith the exceptions ISR address + 12 00000000 ;* - Configure the clock system + 13 00000000 ;* - Branches to __main in the C li + brary (which eventually + 14 00000000 ;* calls main()). + 15 00000000 ;* After Reset the CortexM3 process + or is in Thread mode, + 16 00000000 ;* priority is Privileged, and the + Stack is set to Main. + 17 00000000 ;* <<< Use Configuration Wizard in Context Menu >>> + 18 00000000 ;******************************************************* + ************************ + 19 00000000 ; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS A + T PROVIDING CUSTOMERS + 20 00000000 ; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN OR + DER FOR THEM TO SAVE TIME. + 21 00000000 ; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIAB + LE FOR ANY DIRECT, + 22 00000000 ; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY + CLAIMS ARISING FROM THE + 23 00000000 ; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOM + ERS OF THE CODING + 24 00000000 ; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR + PRODUCTS. + 25 00000000 ;******************************************************* + ************************ + 26 00000000 + 27 00000000 ; Amount of memory (in bytes) allocated for Stack + 28 00000000 ; Tailor this value to your application needs + 29 00000000 ; Stack Configuration + 30 00000000 ; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> + 31 00000000 ; + 32 00000000 + 33 00000000 00000400 + Stack_Size + EQU 0x00000400 + 34 00000000 + 35 00000000 AREA STACK, NOINIT, READWRITE, ALIGN +=3 + 36 00000000 Stack_Mem + SPACE Stack_Size + 37 00000400 __initial_sp + 38 00000400 + 39 00000400 + 40 00000400 ; Heap Configuration + + + +ARM Macro Assembler Page 2 + + + 41 00000400 ; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> + 42 00000400 ; + 43 00000400 + 44 00000400 00000200 + Heap_Size + EQU 0x00000200 + 45 00000400 + 46 00000400 AREA HEAP, NOINIT, READWRITE, ALIGN= +3 + 47 00000000 __heap_base + 48 00000000 Heap_Mem + SPACE Heap_Size + 49 00000200 __heap_limit + 50 00000200 + 51 00000200 PRESERVE8 + 52 00000200 THUMB + 53 00000200 + 54 00000200 + 55 00000200 ; Vector Table Mapped to Address 0 at Reset + 56 00000200 AREA RESET, DATA, READONLY + 57 00000000 EXPORT __Vectors + 58 00000000 EXPORT __Vectors_End + 59 00000000 EXPORT __Vectors_Size + 60 00000000 + 61 00000000 00000000 + __Vectors + DCD __initial_sp ; Top of Stack + 62 00000004 00000000 DCD Reset_Handler ; Reset Handler + 63 00000008 00000000 DCD NMI_Handler ; NMI Handler + 64 0000000C 00000000 DCD HardFault_Handler ; Hard Fault + Handler + 65 00000010 00000000 DCD MemManage_Handler + ; MPU Fault Handler + + 66 00000014 00000000 DCD BusFault_Handler + ; Bus Fault Handler + + 67 00000018 00000000 DCD UsageFault_Handler ; Usage Faul + t Handler + 68 0000001C 00000000 DCD 0 ; Reserved + 69 00000020 00000000 DCD 0 ; Reserved + 70 00000024 00000000 DCD 0 ; Reserved + 71 00000028 00000000 DCD 0 ; Reserved + 72 0000002C 00000000 DCD SVC_Handler ; SVCall Handler + 73 00000030 00000000 DCD DebugMon_Handler ; Debug Monito + r Handler + 74 00000034 00000000 DCD 0 ; Reserved + 75 00000038 00000000 DCD PendSV_Handler ; PendSV Handler + + 76 0000003C 00000000 DCD SysTick_Handler + ; SysTick Handler + 77 00000040 + 78 00000040 ; External Interrupts + 79 00000040 00000000 DCD WWDG_IRQHandler + ; Window Watchdog + 80 00000044 00000000 DCD PVD_IRQHandler ; PVD through EX + TI Line detect + 81 00000048 00000000 DCD TAMPER_IRQHandler ; Tamper + 82 0000004C 00000000 DCD RTC_IRQHandler ; RTC + + + +ARM Macro Assembler Page 3 + + + 83 00000050 00000000 DCD FLASH_IRQHandler ; Flash + 84 00000054 00000000 DCD RCC_IRQHandler ; RCC + 85 00000058 00000000 DCD EXTI0_IRQHandler ; EXTI Line 0 + 86 0000005C 00000000 DCD EXTI1_IRQHandler ; EXTI Line 1 + 87 00000060 00000000 DCD EXTI2_IRQHandler ; EXTI Line 2 + 88 00000064 00000000 DCD EXTI3_IRQHandler ; EXTI Line 3 + 89 00000068 00000000 DCD EXTI4_IRQHandler ; EXTI Line 4 + 90 0000006C 00000000 DCD DMA1_Channel1_IRQHandler + ; DMA1 Channel 1 + 91 00000070 00000000 DCD DMA1_Channel2_IRQHandler + ; DMA1 Channel 2 + 92 00000074 00000000 DCD DMA1_Channel3_IRQHandler + ; DMA1 Channel 3 + 93 00000078 00000000 DCD DMA1_Channel4_IRQHandler + ; DMA1 Channel 4 + 94 0000007C 00000000 DCD DMA1_Channel5_IRQHandler + ; DMA1 Channel 5 + 95 00000080 00000000 DCD DMA1_Channel6_IRQHandler + ; DMA1 Channel 6 + 96 00000084 00000000 DCD DMA1_Channel7_IRQHandler + ; DMA1 Channel 7 + 97 00000088 00000000 DCD ADC1_2_IRQHandler ; ADC1_2 + 98 0000008C 00000000 DCD USB_HP_CAN1_TX_IRQHandler ; USB + High Priority or C + AN1 TX + 99 00000090 00000000 DCD USB_LP_CAN1_RX0_IRQHandler ; US + B Low Priority or + CAN1 RX0 + 100 00000094 00000000 DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + 101 00000098 00000000 DCD CAN1_SCE_IRQHandler ; CAN1 SCE + 102 0000009C 00000000 DCD EXTI9_5_IRQHandler + ; EXTI Line 9..5 + 103 000000A0 00000000 DCD TIM1_BRK_IRQHandler + ; TIM1 Break + 104 000000A4 00000000 DCD TIM1_UP_IRQHandler + ; TIM1 Update + 105 000000A8 00000000 DCD TIM1_TRG_COM_IRQHandler ; TIM1 + Trigger and Commuta + tion + 106 000000AC 00000000 DCD TIM1_CC_IRQHandler ; TIM1 Captu + re Compare + 107 000000B0 00000000 DCD TIM2_IRQHandler ; TIM2 + 108 000000B4 00000000 DCD TIM3_IRQHandler ; TIM3 + 109 000000B8 00000000 DCD 0 ; Reserved + 110 000000BC 00000000 DCD I2C1_EV_IRQHandler ; I2C1 Event + + 111 000000C0 00000000 DCD I2C1_ER_IRQHandler ; I2C1 Error + + 112 000000C4 00000000 DCD 0 ; Reserved + 113 000000C8 00000000 DCD 0 ; Reserved + 114 000000CC 00000000 DCD SPI1_IRQHandler ; SPI1 + 115 000000D0 00000000 DCD 0 ; Reserved + 116 000000D4 00000000 DCD USART1_IRQHandler ; USART1 + 117 000000D8 00000000 DCD USART2_IRQHandler ; USART2 + 118 000000DC 00000000 DCD 0 ; Reserved + 119 000000E0 00000000 DCD EXTI15_10_IRQHandler + ; EXTI Line 15..10 + 120 000000E4 00000000 DCD RTCAlarm_IRQHandler ; RTC Alarm + through EXTI Line + + + +ARM Macro Assembler Page 4 + + + 121 000000E8 00000000 DCD USBWakeUp_IRQHandler ; USB Wake + up from suspend + 122 000000EC __Vectors_End + 123 000000EC + 124 000000EC 000000EC + __Vectors_Size + EQU __Vectors_End - __Vectors + 125 000000EC + 126 000000EC AREA |.text|, CODE, READONLY + 127 00000000 + 128 00000000 ; Reset handler routine + 129 00000000 Reset_Handler + PROC + 130 00000000 EXPORT Reset_Handler [WEAK +] + 131 00000000 IMPORT __main + 132 00000000 IMPORT SystemInit + 133 00000000 4809 LDR R0, =SystemInit + 134 00000002 4780 BLX R0 + 135 00000004 4809 LDR R0, =__main + 136 00000006 4700 BX R0 + 137 00000008 ENDP + 138 00000008 + 139 00000008 ; Dummy Exception Handlers (infinite loops which can be + modified) + 140 00000008 + 141 00000008 NMI_Handler + PROC + 142 00000008 EXPORT NMI_Handler [WEA +K] + 143 00000008 E7FE B . + 144 0000000A ENDP + 146 0000000A HardFault_Handler + PROC + 147 0000000A EXPORT HardFault_Handler [WEA +K] + 148 0000000A E7FE B . + 149 0000000C ENDP + 151 0000000C MemManage_Handler + PROC + 152 0000000C EXPORT MemManage_Handler [WEA +K] + 153 0000000C E7FE B . + 154 0000000E ENDP + 156 0000000E BusFault_Handler + PROC + 157 0000000E EXPORT BusFault_Handler [WEA +K] + 158 0000000E E7FE B . + 159 00000010 ENDP + 161 00000010 UsageFault_Handler + PROC + 162 00000010 EXPORT UsageFault_Handler [WEA +K] + 163 00000010 E7FE B . + 164 00000012 ENDP + 165 00000012 SVC_Handler + PROC + 166 00000012 EXPORT SVC_Handler [WEA + + + +ARM Macro Assembler Page 5 + + +K] + 167 00000012 E7FE B . + 168 00000014 ENDP + 170 00000014 DebugMon_Handler + PROC + 171 00000014 EXPORT DebugMon_Handler [WEA +K] + 172 00000014 E7FE B . + 173 00000016 ENDP + 174 00000016 PendSV_Handler + PROC + 175 00000016 EXPORT PendSV_Handler [WEA +K] + 176 00000016 E7FE B . + 177 00000018 ENDP + 178 00000018 SysTick_Handler + PROC + 179 00000018 EXPORT SysTick_Handler [WEA +K] + 180 00000018 E7FE B . + 181 0000001A ENDP + 182 0000001A + 183 0000001A Default_Handler + PROC + 184 0000001A + 185 0000001A EXPORT WWDG_IRQHandler [WEA +K] + 186 0000001A EXPORT PVD_IRQHandler [WEA +K] + 187 0000001A EXPORT TAMPER_IRQHandler [WEA +K] + 188 0000001A EXPORT RTC_IRQHandler [WEA +K] + 189 0000001A EXPORT FLASH_IRQHandler [WEA +K] + 190 0000001A EXPORT RCC_IRQHandler [WEA +K] + 191 0000001A EXPORT EXTI0_IRQHandler [WEA +K] + 192 0000001A EXPORT EXTI1_IRQHandler [WEA +K] + 193 0000001A EXPORT EXTI2_IRQHandler [WEA +K] + 194 0000001A EXPORT EXTI3_IRQHandler [WEA +K] + 195 0000001A EXPORT EXTI4_IRQHandler [WEA +K] + 196 0000001A EXPORT DMA1_Channel1_IRQHandler [WEA +K] + 197 0000001A EXPORT DMA1_Channel2_IRQHandler [WEA +K] + 198 0000001A EXPORT DMA1_Channel3_IRQHandler [WEA +K] + 199 0000001A EXPORT DMA1_Channel4_IRQHandler [WEA +K] + 200 0000001A EXPORT DMA1_Channel5_IRQHandler [WEA +K] + 201 0000001A EXPORT DMA1_Channel6_IRQHandler [WEA +K] + + + +ARM Macro Assembler Page 6 + + + 202 0000001A EXPORT DMA1_Channel7_IRQHandler [WEA +K] + 203 0000001A EXPORT ADC1_2_IRQHandler [WEA +K] + 204 0000001A EXPORT USB_HP_CAN1_TX_IRQHandler [WEA +K] + 205 0000001A EXPORT USB_LP_CAN1_RX0_IRQHandler [WEA +K] + 206 0000001A EXPORT CAN1_RX1_IRQHandler [WEA +K] + 207 0000001A EXPORT CAN1_SCE_IRQHandler [WEA +K] + 208 0000001A EXPORT EXTI9_5_IRQHandler [WEA +K] + 209 0000001A EXPORT TIM1_BRK_IRQHandler [WEA +K] + 210 0000001A EXPORT TIM1_UP_IRQHandler [WEA +K] + 211 0000001A EXPORT TIM1_TRG_COM_IRQHandler [WEA +K] + 212 0000001A EXPORT TIM1_CC_IRQHandler [WEA +K] + 213 0000001A EXPORT TIM2_IRQHandler [WEA +K] + 214 0000001A EXPORT TIM3_IRQHandler [WEA +K] + 215 0000001A EXPORT I2C1_EV_IRQHandler [WEA +K] + 216 0000001A EXPORT I2C1_ER_IRQHandler [WEA +K] + 217 0000001A EXPORT SPI1_IRQHandler [WEA +K] + 218 0000001A EXPORT USART1_IRQHandler [WEA +K] + 219 0000001A EXPORT USART2_IRQHandler [WEA +K] + 220 0000001A EXPORT EXTI15_10_IRQHandler [WEA +K] + 221 0000001A EXPORT RTCAlarm_IRQHandler [WEA +K] + 222 0000001A EXPORT USBWakeUp_IRQHandler [WEA +K] + 223 0000001A + 224 0000001A WWDG_IRQHandler + 225 0000001A PVD_IRQHandler + 226 0000001A TAMPER_IRQHandler + 227 0000001A RTC_IRQHandler + 228 0000001A FLASH_IRQHandler + 229 0000001A RCC_IRQHandler + 230 0000001A EXTI0_IRQHandler + 231 0000001A EXTI1_IRQHandler + 232 0000001A EXTI2_IRQHandler + 233 0000001A EXTI3_IRQHandler + 234 0000001A EXTI4_IRQHandler + 235 0000001A DMA1_Channel1_IRQHandler + 236 0000001A DMA1_Channel2_IRQHandler + 237 0000001A DMA1_Channel3_IRQHandler + 238 0000001A DMA1_Channel4_IRQHandler + 239 0000001A DMA1_Channel5_IRQHandler + + + +ARM Macro Assembler Page 7 + + + 240 0000001A DMA1_Channel6_IRQHandler + 241 0000001A DMA1_Channel7_IRQHandler + 242 0000001A ADC1_2_IRQHandler + 243 0000001A USB_HP_CAN1_TX_IRQHandler + 244 0000001A USB_LP_CAN1_RX0_IRQHandler + 245 0000001A CAN1_RX1_IRQHandler + 246 0000001A CAN1_SCE_IRQHandler + 247 0000001A EXTI9_5_IRQHandler + 248 0000001A TIM1_BRK_IRQHandler + 249 0000001A TIM1_UP_IRQHandler + 250 0000001A TIM1_TRG_COM_IRQHandler + 251 0000001A TIM1_CC_IRQHandler + 252 0000001A TIM2_IRQHandler + 253 0000001A TIM3_IRQHandler + 254 0000001A I2C1_EV_IRQHandler + 255 0000001A I2C1_ER_IRQHandler + 256 0000001A SPI1_IRQHandler + 257 0000001A USART1_IRQHandler + 258 0000001A USART2_IRQHandler + 259 0000001A EXTI15_10_IRQHandler + 260 0000001A RTCAlarm_IRQHandler + 261 0000001A USBWakeUp_IRQHandler + 262 0000001A + 263 0000001A E7FE B . + 264 0000001C + 265 0000001C ENDP + 266 0000001C + 267 0000001C ALIGN + 268 0000001C + 269 0000001C ;******************************************************* + ************************ + 270 0000001C ; User Stack and Heap initialization + 271 0000001C ;******************************************************* + ************************ + 272 0000001C IF :DEF:__MICROLIB + 279 0000001C + 280 0000001C IMPORT __use_two_region_memory + 281 0000001C EXPORT __user_initial_stackheap + 282 0000001C + 283 0000001C __user_initial_stackheap + 284 0000001C + 285 0000001C 4804 LDR R0, = Heap_Mem + 286 0000001E 4905 LDR R1, =(Stack_Mem + Stack_Size) + 287 00000020 4A05 LDR R2, = (Heap_Mem + Heap_Size) + 288 00000022 4B06 LDR R3, = Stack_Mem + 289 00000024 4770 BX LR + 290 00000026 + 291 00000026 00 00 ALIGN + 292 00000028 + 293 00000028 ENDIF + 294 00000028 + 295 00000028 END + 00000000 + 00000000 + 00000000 + 00000400 + 00000200 + 00000000 +Command Line: --debug --xref --cpu=Cortex-M3 --apcs=interwork --depend=..\Outpu + + + +ARM Macro Assembler Page 8 + + +t\startup_stm32f10x_ld.d -o..\Output\startup_stm32f10x_ld.o -I"E:\Program Files + (x86)\keil\ARM\INC" -I"E:\Program Files (x86)\keil\ARM\INC\ST\STM32F10x" --lis +t=..\Listing\startup_stm32f10x_ld.lst ..\Libraries\CMSIS\startup\startup_stm32f +10x_ld.s + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +STACK 00000000 + +Symbol: STACK + Definitions + At line 35 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + None +Comment: STACK unused +Stack_Mem 00000000 + +Symbol: Stack_Mem + Definitions + At line 36 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 286 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 288 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +__initial_sp 00000400 + +Symbol: __initial_sp + Definitions + At line 37 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 61 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s +Comment: __initial_sp used once +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +HEAP 00000000 + +Symbol: HEAP + Definitions + At line 46 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + None +Comment: HEAP unused +Heap_Mem 00000000 + +Symbol: Heap_Mem + Definitions + At line 48 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 285 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 287 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +__heap_base 00000000 + +Symbol: __heap_base + Definitions + At line 47 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + None +Comment: __heap_base unused +__heap_limit 00000200 + +Symbol: __heap_limit + Definitions + At line 49 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + None +Comment: __heap_limit unused +4 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +RESET 00000000 + +Symbol: RESET + Definitions + At line 56 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + None +Comment: RESET unused +__Vectors 00000000 + +Symbol: __Vectors + Definitions + At line 61 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 57 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 124 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +__Vectors_End 000000EC + +Symbol: __Vectors_End + Definitions + At line 122 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 58 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 124 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +.text 00000000 + +Symbol: .text + Definitions + At line 126 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + None +Comment: .text unused +ADC1_2_IRQHandler 0000001A + +Symbol: ADC1_2_IRQHandler + Definitions + At line 242 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 97 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 203 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +BusFault_Handler 0000000E + +Symbol: BusFault_Handler + Definitions + At line 156 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 66 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 157 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +CAN1_RX1_IRQHandler 0000001A + +Symbol: CAN1_RX1_IRQHandler + Definitions + At line 245 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 100 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 206 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +CAN1_SCE_IRQHandler 0000001A + +Symbol: CAN1_SCE_IRQHandler + Definitions + At line 246 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 101 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 207 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +DMA1_Channel1_IRQHandler 0000001A + +Symbol: DMA1_Channel1_IRQHandler + Definitions + At line 235 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 90 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 196 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +DMA1_Channel2_IRQHandler 0000001A + +Symbol: DMA1_Channel2_IRQHandler + Definitions + At line 236 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + + + +ARM Macro Assembler Page 2 Alphabetic symbol ordering +Relocatable symbols + + At line 91 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 197 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +DMA1_Channel3_IRQHandler 0000001A + +Symbol: DMA1_Channel3_IRQHandler + Definitions + At line 237 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 92 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 198 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +DMA1_Channel4_IRQHandler 0000001A + +Symbol: DMA1_Channel4_IRQHandler + Definitions + At line 238 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 93 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 199 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +DMA1_Channel5_IRQHandler 0000001A + +Symbol: DMA1_Channel5_IRQHandler + Definitions + At line 239 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 94 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 200 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +DMA1_Channel6_IRQHandler 0000001A + +Symbol: DMA1_Channel6_IRQHandler + Definitions + At line 240 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 95 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 201 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +DMA1_Channel7_IRQHandler 0000001A + +Symbol: DMA1_Channel7_IRQHandler + Definitions + At line 241 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 96 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 202 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +DebugMon_Handler 00000014 + +Symbol: DebugMon_Handler + Definitions + At line 170 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 73 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 171 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +Default_Handler 0000001A + + + + +ARM Macro Assembler Page 3 Alphabetic symbol ordering +Relocatable symbols + +Symbol: Default_Handler + Definitions + At line 183 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + None +Comment: Default_Handler unused +EXTI0_IRQHandler 0000001A + +Symbol: EXTI0_IRQHandler + Definitions + At line 230 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 85 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 191 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +EXTI15_10_IRQHandler 0000001A + +Symbol: EXTI15_10_IRQHandler + Definitions + At line 259 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 119 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 220 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +EXTI1_IRQHandler 0000001A + +Symbol: EXTI1_IRQHandler + Definitions + At line 231 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 86 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 192 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +EXTI2_IRQHandler 0000001A + +Symbol: EXTI2_IRQHandler + Definitions + At line 232 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 87 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 193 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +EXTI3_IRQHandler 0000001A + +Symbol: EXTI3_IRQHandler + Definitions + At line 233 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 88 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 194 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +EXTI4_IRQHandler 0000001A + +Symbol: EXTI4_IRQHandler + Definitions + At line 234 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 89 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 195 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + + + +ARM Macro Assembler Page 4 Alphabetic symbol ordering +Relocatable symbols + + +EXTI9_5_IRQHandler 0000001A + +Symbol: EXTI9_5_IRQHandler + Definitions + At line 247 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 102 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 208 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +FLASH_IRQHandler 0000001A + +Symbol: FLASH_IRQHandler + Definitions + At line 228 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 83 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 189 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +HardFault_Handler 0000000A + +Symbol: HardFault_Handler + Definitions + At line 146 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 64 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 147 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +I2C1_ER_IRQHandler 0000001A + +Symbol: I2C1_ER_IRQHandler + Definitions + At line 255 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 111 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 216 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +I2C1_EV_IRQHandler 0000001A + +Symbol: I2C1_EV_IRQHandler + Definitions + At line 254 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 110 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 215 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +MemManage_Handler 0000000C + +Symbol: MemManage_Handler + Definitions + At line 151 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 65 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 152 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +NMI_Handler 00000008 + +Symbol: NMI_Handler + Definitions + + + +ARM Macro Assembler Page 5 Alphabetic symbol ordering +Relocatable symbols + + At line 141 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 63 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 142 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +PVD_IRQHandler 0000001A + +Symbol: PVD_IRQHandler + Definitions + At line 225 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 80 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 186 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +PendSV_Handler 00000016 + +Symbol: PendSV_Handler + Definitions + At line 174 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 75 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 175 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +RCC_IRQHandler 0000001A + +Symbol: RCC_IRQHandler + Definitions + At line 229 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 84 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 190 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +RTCAlarm_IRQHandler 0000001A + +Symbol: RTCAlarm_IRQHandler + Definitions + At line 260 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 120 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 221 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +RTC_IRQHandler 0000001A + +Symbol: RTC_IRQHandler + Definitions + At line 227 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 82 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 188 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +Reset_Handler 00000000 + +Symbol: Reset_Handler + Definitions + At line 129 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 62 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 130 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + + + + +ARM Macro Assembler Page 6 Alphabetic symbol ordering +Relocatable symbols + +SPI1_IRQHandler 0000001A + +Symbol: SPI1_IRQHandler + Definitions + At line 256 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 114 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 217 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +SVC_Handler 00000012 + +Symbol: SVC_Handler + Definitions + At line 165 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 72 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 166 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +SysTick_Handler 00000018 + +Symbol: SysTick_Handler + Definitions + At line 178 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 76 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 179 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +TAMPER_IRQHandler 0000001A + +Symbol: TAMPER_IRQHandler + Definitions + At line 226 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 81 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 187 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +TIM1_BRK_IRQHandler 0000001A + +Symbol: TIM1_BRK_IRQHandler + Definitions + At line 248 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 103 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 209 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +TIM1_CC_IRQHandler 0000001A + +Symbol: TIM1_CC_IRQHandler + Definitions + At line 251 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 106 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 212 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +TIM1_TRG_COM_IRQHandler 0000001A + +Symbol: TIM1_TRG_COM_IRQHandler + Definitions + At line 250 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + + + +ARM Macro Assembler Page 7 Alphabetic symbol ordering +Relocatable symbols + + Uses + At line 105 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 211 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +TIM1_UP_IRQHandler 0000001A + +Symbol: TIM1_UP_IRQHandler + Definitions + At line 249 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 104 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 210 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +TIM2_IRQHandler 0000001A + +Symbol: TIM2_IRQHandler + Definitions + At line 252 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 107 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 213 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +TIM3_IRQHandler 0000001A + +Symbol: TIM3_IRQHandler + Definitions + At line 253 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 108 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 214 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +USART1_IRQHandler 0000001A + +Symbol: USART1_IRQHandler + Definitions + At line 257 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 116 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 218 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +USART2_IRQHandler 0000001A + +Symbol: USART2_IRQHandler + Definitions + At line 258 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 117 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 219 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +USBWakeUp_IRQHandler 0000001A + +Symbol: USBWakeUp_IRQHandler + Definitions + At line 261 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 121 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 222 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +USB_HP_CAN1_TX_IRQHandler 0000001A + + + +ARM Macro Assembler Page 8 Alphabetic symbol ordering +Relocatable symbols + + +Symbol: USB_HP_CAN1_TX_IRQHandler + Definitions + At line 243 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 98 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 204 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +USB_LP_CAN1_RX0_IRQHandler 0000001A + +Symbol: USB_LP_CAN1_RX0_IRQHandler + Definitions + At line 244 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 99 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 205 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +UsageFault_Handler 00000010 + +Symbol: UsageFault_Handler + Definitions + At line 161 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 67 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 162 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +WWDG_IRQHandler 0000001A + +Symbol: WWDG_IRQHandler + Definitions + At line 224 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 79 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 185 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +__user_initial_stackheap 0000001C + +Symbol: __user_initial_stackheap + Definitions + At line 283 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 281 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s +Comment: __user_initial_stackheap used once +51 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Absolute symbols + +Heap_Size 00000200 + +Symbol: Heap_Size + Definitions + At line 44 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 48 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 287 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +Stack_Size 00000400 + +Symbol: Stack_Size + Definitions + At line 33 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 36 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + At line 286 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + +__Vectors_Size 000000EC + +Symbol: __Vectors_Size + Definitions + At line 124 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 59 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s +Comment: __Vectors_Size used once +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +External symbols + +SystemInit 00000000 + +Symbol: SystemInit + Definitions + At line 132 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 133 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s +Comment: SystemInit used once +__main 00000000 + +Symbol: __main + Definitions + At line 131 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + At line 135 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s +Comment: __main used once +__use_two_region_memory 00000000 + +Symbol: __use_two_region_memory + Definitions + At line 280 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s + Uses + None +Comment: __use_two_region_memory unused +3 symbols +395 symbols in table diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Listing/startup_stm32f10x_md.lst b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Listing/startup_stm32f10x_md.lst new file mode 100644 index 0000000..781fd26 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Listing/startup_stm32f10x_md.lst @@ -0,0 +1,1210 @@ + + + +ARM Macro Assembler Page 1 + + + 1 00000000 ;******************** (C) COPYRIGHT 2011 STMicroelectron + ics ******************** + 2 00000000 ;* File Name : startup_stm32f10x_md.s + 3 00000000 ;* Author : MCD Application Team + 4 00000000 ;* Version : V3.5.0 + 5 00000000 ;* Date : 11-March-2011 + 6 00000000 ;* Description : STM32F10x Medium Density Devices + vector table for MDK-ARM + 7 00000000 ;* toolchain. + 8 00000000 ;* This module performs: + 9 00000000 ;* - Set the initial SP + 10 00000000 ;* - Set the initial PC == Reset_Ha + ndler + 11 00000000 ;* - Set the vector table entries w + ith the exceptions ISR address + 12 00000000 ;* - Configure the clock system + 13 00000000 ;* - Branches to __main in the C li + brary (which eventually + 14 00000000 ;* calls main()). + 15 00000000 ;* After Reset the CortexM3 process + or is in Thread mode, + 16 00000000 ;* priority is Privileged, and the + Stack is set to Main. + 17 00000000 ;* <<< Use Configuration Wizard in Context Menu >>> + 18 00000000 ;******************************************************* + ************************ + 19 00000000 ; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS A + T PROVIDING CUSTOMERS + 20 00000000 ; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN OR + DER FOR THEM TO SAVE TIME. + 21 00000000 ; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIAB + LE FOR ANY DIRECT, + 22 00000000 ; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY + CLAIMS ARISING FROM THE + 23 00000000 ; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOM + ERS OF THE CODING + 24 00000000 ; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR + PRODUCTS. + 25 00000000 ;******************************************************* + ************************ + 26 00000000 + 27 00000000 ; Amount of memory (in bytes) allocated for Stack + 28 00000000 ; Tailor this value to your application needs + 29 00000000 ; Stack Configuration + 30 00000000 ; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> + 31 00000000 ; + 32 00000000 + 33 00000000 00000400 + Stack_Size + EQU 0x00000400 + 34 00000000 + 35 00000000 AREA STACK, NOINIT, READWRITE, ALIGN +=3 + 36 00000000 Stack_Mem + SPACE Stack_Size + 37 00000400 __initial_sp + 38 00000400 + 39 00000400 + 40 00000400 ; Heap Configuration + + + +ARM Macro Assembler Page 2 + + + 41 00000400 ; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> + 42 00000400 ; + 43 00000400 + 44 00000400 00000200 + Heap_Size + EQU 0x00000200 + 45 00000400 + 46 00000400 AREA HEAP, NOINIT, READWRITE, ALIGN= +3 + 47 00000000 __heap_base + 48 00000000 Heap_Mem + SPACE Heap_Size + 49 00000200 __heap_limit + 50 00000200 + 51 00000200 PRESERVE8 + 52 00000200 THUMB + 53 00000200 + 54 00000200 + 55 00000200 ; Vector Table Mapped to Address 0 at Reset + 56 00000200 AREA RESET, DATA, READONLY + 57 00000000 EXPORT __Vectors + 58 00000000 EXPORT __Vectors_End + 59 00000000 EXPORT __Vectors_Size + 60 00000000 + 61 00000000 00000000 + __Vectors + DCD __initial_sp ; Top of Stack + 62 00000004 00000000 DCD Reset_Handler ; Reset Handler + 63 00000008 00000000 DCD NMI_Handler ; NMI Handler + 64 0000000C 00000000 DCD HardFault_Handler ; Hard Fault + Handler + 65 00000010 00000000 DCD MemManage_Handler + ; MPU Fault Handler + + 66 00000014 00000000 DCD BusFault_Handler + ; Bus Fault Handler + + 67 00000018 00000000 DCD UsageFault_Handler ; Usage Faul + t Handler + 68 0000001C 00000000 DCD 0 ; Reserved + 69 00000020 00000000 DCD 0 ; Reserved + 70 00000024 00000000 DCD 0 ; Reserved + 71 00000028 00000000 DCD 0 ; Reserved + 72 0000002C 00000000 DCD SVC_Handler ; SVCall Handler + 73 00000030 00000000 DCD DebugMon_Handler ; Debug Monito + r Handler + 74 00000034 00000000 DCD 0 ; Reserved + 75 00000038 00000000 DCD PendSV_Handler ; PendSV Handler + + 76 0000003C 00000000 DCD SysTick_Handler + ; SysTick Handler + 77 00000040 + 78 00000040 ; External Interrupts + 79 00000040 00000000 DCD WWDG_IRQHandler + ; Window Watchdog + 80 00000044 00000000 DCD PVD_IRQHandler ; PVD through EX + TI Line detect + 81 00000048 00000000 DCD TAMPER_IRQHandler ; Tamper + 82 0000004C 00000000 DCD RTC_IRQHandler ; RTC + + + +ARM Macro Assembler Page 3 + + + 83 00000050 00000000 DCD FLASH_IRQHandler ; Flash + 84 00000054 00000000 DCD RCC_IRQHandler ; RCC + 85 00000058 00000000 DCD EXTI0_IRQHandler ; EXTI Line 0 + 86 0000005C 00000000 DCD EXTI1_IRQHandler ; EXTI Line 1 + 87 00000060 00000000 DCD EXTI2_IRQHandler ; EXTI Line 2 + 88 00000064 00000000 DCD EXTI3_IRQHandler ; EXTI Line 3 + 89 00000068 00000000 DCD EXTI4_IRQHandler ; EXTI Line 4 + 90 0000006C 00000000 DCD DMA1_Channel1_IRQHandler + ; DMA1 Channel 1 + 91 00000070 00000000 DCD DMA1_Channel2_IRQHandler + ; DMA1 Channel 2 + 92 00000074 00000000 DCD DMA1_Channel3_IRQHandler + ; DMA1 Channel 3 + 93 00000078 00000000 DCD DMA1_Channel4_IRQHandler + ; DMA1 Channel 4 + 94 0000007C 00000000 DCD DMA1_Channel5_IRQHandler + ; DMA1 Channel 5 + 95 00000080 00000000 DCD DMA1_Channel6_IRQHandler + ; DMA1 Channel 6 + 96 00000084 00000000 DCD DMA1_Channel7_IRQHandler + ; DMA1 Channel 7 + 97 00000088 00000000 DCD ADC1_2_IRQHandler ; ADC1_2 + 98 0000008C 00000000 DCD USB_HP_CAN1_TX_IRQHandler ; USB + High Priority or C + AN1 TX + 99 00000090 00000000 DCD USB_LP_CAN1_RX0_IRQHandler ; US + B Low Priority or + CAN1 RX0 + 100 00000094 00000000 DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + 101 00000098 00000000 DCD CAN1_SCE_IRQHandler ; CAN1 SCE + 102 0000009C 00000000 DCD EXTI9_5_IRQHandler + ; EXTI Line 9..5 + 103 000000A0 00000000 DCD TIM1_BRK_IRQHandler + ; TIM1 Break + 104 000000A4 00000000 DCD TIM1_UP_IRQHandler + ; TIM1 Update + 105 000000A8 00000000 DCD TIM1_TRG_COM_IRQHandler ; TIM1 + Trigger and Commuta + tion + 106 000000AC 00000000 DCD TIM1_CC_IRQHandler ; TIM1 Captu + re Compare + 107 000000B0 00000000 DCD TIM2_IRQHandler ; TIM2 + 108 000000B4 00000000 DCD TIM3_IRQHandler ; TIM3 + 109 000000B8 00000000 DCD TIM4_IRQHandler ; TIM4 + 110 000000BC 00000000 DCD I2C1_EV_IRQHandler ; I2C1 Event + + 111 000000C0 00000000 DCD I2C1_ER_IRQHandler ; I2C1 Error + + 112 000000C4 00000000 DCD I2C2_EV_IRQHandler ; I2C2 Event + + 113 000000C8 00000000 DCD I2C2_ER_IRQHandler ; I2C2 Error + + 114 000000CC 00000000 DCD SPI1_IRQHandler ; SPI1 + 115 000000D0 00000000 DCD SPI2_IRQHandler ; SPI2 + 116 000000D4 00000000 DCD USART1_IRQHandler ; USART1 + 117 000000D8 00000000 DCD USART2_IRQHandler ; USART2 + 118 000000DC 00000000 DCD USART3_IRQHandler ; USART3 + 119 000000E0 00000000 DCD EXTI15_10_IRQHandler + ; EXTI Line 15..10 + + + +ARM Macro Assembler Page 4 + + + 120 000000E4 00000000 DCD RTCAlarm_IRQHandler ; RTC Alarm + through EXTI Line + 121 000000E8 00000000 DCD USBWakeUp_IRQHandler ; USB Wake + up from suspend + 122 000000EC __Vectors_End + 123 000000EC + 124 000000EC 000000EC + __Vectors_Size + EQU __Vectors_End - __Vectors + 125 000000EC + 126 000000EC AREA |.text|, CODE, READONLY + 127 00000000 + 128 00000000 ; Reset handler + 129 00000000 Reset_Handler + PROC + 130 00000000 EXPORT Reset_Handler [WEAK +] + 131 00000000 IMPORT __main + 132 00000000 IMPORT SystemInit + 133 00000000 4809 LDR R0, =SystemInit + 134 00000002 4780 BLX R0 + 135 00000004 4809 LDR R0, =__main + 136 00000006 4700 BX R0 + 137 00000008 ENDP + 138 00000008 + 139 00000008 ; Dummy Exception Handlers (infinite loops which can be + modified) + 140 00000008 + 141 00000008 NMI_Handler + PROC + 142 00000008 EXPORT NMI_Handler [WEA +K] + 143 00000008 E7FE B . + 144 0000000A ENDP + 146 0000000A HardFault_Handler + PROC + 147 0000000A EXPORT HardFault_Handler [WEA +K] + 148 0000000A E7FE B . + 149 0000000C ENDP + 151 0000000C MemManage_Handler + PROC + 152 0000000C EXPORT MemManage_Handler [WEA +K] + 153 0000000C E7FE B . + 154 0000000E ENDP + 156 0000000E BusFault_Handler + PROC + 157 0000000E EXPORT BusFault_Handler [WEA +K] + 158 0000000E E7FE B . + 159 00000010 ENDP + 161 00000010 UsageFault_Handler + PROC + 162 00000010 EXPORT UsageFault_Handler [WEA +K] + 163 00000010 E7FE B . + 164 00000012 ENDP + 165 00000012 SVC_Handler + + + +ARM Macro Assembler Page 5 + + + PROC + 166 00000012 EXPORT SVC_Handler [WEA +K] + 167 00000012 E7FE B . + 168 00000014 ENDP + 170 00000014 DebugMon_Handler + PROC + 171 00000014 EXPORT DebugMon_Handler [WEA +K] + 172 00000014 E7FE B . + 173 00000016 ENDP + 174 00000016 PendSV_Handler + PROC + 175 00000016 EXPORT PendSV_Handler [WEA +K] + 176 00000016 E7FE B . + 177 00000018 ENDP + 178 00000018 SysTick_Handler + PROC + 179 00000018 EXPORT SysTick_Handler [WEA +K] + 180 00000018 E7FE B . + 181 0000001A ENDP + 182 0000001A + 183 0000001A Default_Handler + PROC + 184 0000001A + 185 0000001A EXPORT WWDG_IRQHandler [WEA +K] + 186 0000001A EXPORT PVD_IRQHandler [WEA +K] + 187 0000001A EXPORT TAMPER_IRQHandler [WEA +K] + 188 0000001A EXPORT RTC_IRQHandler [WEA +K] + 189 0000001A EXPORT FLASH_IRQHandler [WEA +K] + 190 0000001A EXPORT RCC_IRQHandler [WEA +K] + 191 0000001A EXPORT EXTI0_IRQHandler [WEA +K] + 192 0000001A EXPORT EXTI1_IRQHandler [WEA +K] + 193 0000001A EXPORT EXTI2_IRQHandler [WEA +K] + 194 0000001A EXPORT EXTI3_IRQHandler [WEA +K] + 195 0000001A EXPORT EXTI4_IRQHandler [WEA +K] + 196 0000001A EXPORT DMA1_Channel1_IRQHandler [WEA +K] + 197 0000001A EXPORT DMA1_Channel2_IRQHandler [WEA +K] + 198 0000001A EXPORT DMA1_Channel3_IRQHandler [WEA +K] + 199 0000001A EXPORT DMA1_Channel4_IRQHandler [WEA +K] + 200 0000001A EXPORT DMA1_Channel5_IRQHandler [WEA +K] + + + +ARM Macro Assembler Page 6 + + + 201 0000001A EXPORT DMA1_Channel6_IRQHandler [WEA +K] + 202 0000001A EXPORT DMA1_Channel7_IRQHandler [WEA +K] + 203 0000001A EXPORT ADC1_2_IRQHandler [WEA +K] + 204 0000001A EXPORT USB_HP_CAN1_TX_IRQHandler [WEA +K] + 205 0000001A EXPORT USB_LP_CAN1_RX0_IRQHandler [WEA +K] + 206 0000001A EXPORT CAN1_RX1_IRQHandler [WEA +K] + 207 0000001A EXPORT CAN1_SCE_IRQHandler [WEA +K] + 208 0000001A EXPORT EXTI9_5_IRQHandler [WEA +K] + 209 0000001A EXPORT TIM1_BRK_IRQHandler [WEA +K] + 210 0000001A EXPORT TIM1_UP_IRQHandler [WEA +K] + 211 0000001A EXPORT TIM1_TRG_COM_IRQHandler [WEA +K] + 212 0000001A EXPORT TIM1_CC_IRQHandler [WEA +K] + 213 0000001A EXPORT TIM2_IRQHandler [WEA +K] + 214 0000001A EXPORT TIM3_IRQHandler [WEA +K] + 215 0000001A EXPORT TIM4_IRQHandler [WEA +K] + 216 0000001A EXPORT I2C1_EV_IRQHandler [WEA +K] + 217 0000001A EXPORT I2C1_ER_IRQHandler [WEA +K] + 218 0000001A EXPORT I2C2_EV_IRQHandler [WEA +K] + 219 0000001A EXPORT I2C2_ER_IRQHandler [WEA +K] + 220 0000001A EXPORT SPI1_IRQHandler [WEA +K] + 221 0000001A EXPORT SPI2_IRQHandler [WEA +K] + 222 0000001A EXPORT USART1_IRQHandler [WEA +K] + 223 0000001A EXPORT USART2_IRQHandler [WEA +K] + 224 0000001A EXPORT USART3_IRQHandler [WEA +K] + 225 0000001A EXPORT EXTI15_10_IRQHandler [WEA +K] + 226 0000001A EXPORT RTCAlarm_IRQHandler [WEA +K] + 227 0000001A EXPORT USBWakeUp_IRQHandler [WEA +K] + 228 0000001A + 229 0000001A WWDG_IRQHandler + 230 0000001A PVD_IRQHandler + 231 0000001A TAMPER_IRQHandler + 232 0000001A RTC_IRQHandler + + + +ARM Macro Assembler Page 7 + + + 233 0000001A FLASH_IRQHandler + 234 0000001A RCC_IRQHandler + 235 0000001A EXTI0_IRQHandler + 236 0000001A EXTI1_IRQHandler + 237 0000001A EXTI2_IRQHandler + 238 0000001A EXTI3_IRQHandler + 239 0000001A EXTI4_IRQHandler + 240 0000001A DMA1_Channel1_IRQHandler + 241 0000001A DMA1_Channel2_IRQHandler + 242 0000001A DMA1_Channel3_IRQHandler + 243 0000001A DMA1_Channel4_IRQHandler + 244 0000001A DMA1_Channel5_IRQHandler + 245 0000001A DMA1_Channel6_IRQHandler + 246 0000001A DMA1_Channel7_IRQHandler + 247 0000001A ADC1_2_IRQHandler + 248 0000001A USB_HP_CAN1_TX_IRQHandler + 249 0000001A USB_LP_CAN1_RX0_IRQHandler + 250 0000001A CAN1_RX1_IRQHandler + 251 0000001A CAN1_SCE_IRQHandler + 252 0000001A EXTI9_5_IRQHandler + 253 0000001A TIM1_BRK_IRQHandler + 254 0000001A TIM1_UP_IRQHandler + 255 0000001A TIM1_TRG_COM_IRQHandler + 256 0000001A TIM1_CC_IRQHandler + 257 0000001A TIM2_IRQHandler + 258 0000001A TIM3_IRQHandler + 259 0000001A TIM4_IRQHandler + 260 0000001A I2C1_EV_IRQHandler + 261 0000001A I2C1_ER_IRQHandler + 262 0000001A I2C2_EV_IRQHandler + 263 0000001A I2C2_ER_IRQHandler + 264 0000001A SPI1_IRQHandler + 265 0000001A SPI2_IRQHandler + 266 0000001A USART1_IRQHandler + 267 0000001A USART2_IRQHandler + 268 0000001A USART3_IRQHandler + 269 0000001A EXTI15_10_IRQHandler + 270 0000001A RTCAlarm_IRQHandler + 271 0000001A USBWakeUp_IRQHandler + 272 0000001A + 273 0000001A E7FE B . + 274 0000001C + 275 0000001C ENDP + 276 0000001C + 277 0000001C ALIGN + 278 0000001C + 279 0000001C ;******************************************************* + ************************ + 280 0000001C ; User Stack and Heap initialization + 281 0000001C ;******************************************************* + ************************ + 282 0000001C IF :DEF:__MICROLIB + 289 0000001C + 290 0000001C IMPORT __use_two_region_memory + 291 0000001C EXPORT __user_initial_stackheap + 292 0000001C + 293 0000001C __user_initial_stackheap + 294 0000001C + 295 0000001C 4804 LDR R0, = Heap_Mem + + + +ARM Macro Assembler Page 8 + + + 296 0000001E 4905 LDR R1, =(Stack_Mem + Stack_Size) + 297 00000020 4A05 LDR R2, = (Heap_Mem + Heap_Size) + 298 00000022 4B06 LDR R3, = Stack_Mem + 299 00000024 4770 BX LR + 300 00000026 + 301 00000026 00 00 ALIGN + 302 00000028 + 303 00000028 ENDIF + 304 00000028 + 305 00000028 END + 00000000 + 00000000 + 00000000 + 00000400 + 00000200 + 00000000 +Command Line: --debug --xref --diag_suppress=9931 --cpu=Cortex-M3 --apcs=interw +ork --depend=..\output\startup_stm32f10x_md.d -o..\output\startup_stm32f10x_md. +o -ID:\ϿƼ\С\ķС\\ɫ4-1\Project\RTE +-IC:\Keil\Keil\STM32F1xx_DFP\1.0.5\Device\Include -IC:\Keil\ARM\CMSIS\Include - +-predefine="__UVISION_VERSION SETA 514" --predefine="STM32F10X_MD SETA 1" --lis +t=..\listing\startup_stm32f10x_md.lst ..\Libraries\CMSIS\startup\startup_stm32f +10x_md.s + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +STACK 00000000 + +Symbol: STACK + Definitions + At line 35 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + None +Comment: STACK unused +Stack_Mem 00000000 + +Symbol: Stack_Mem + Definitions + At line 36 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 296 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 298 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +__initial_sp 00000400 + +Symbol: __initial_sp + Definitions + At line 37 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 61 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s +Comment: __initial_sp used once +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +HEAP 00000000 + +Symbol: HEAP + Definitions + At line 46 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + None +Comment: HEAP unused +Heap_Mem 00000000 + +Symbol: Heap_Mem + Definitions + At line 48 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 295 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 297 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +__heap_base 00000000 + +Symbol: __heap_base + Definitions + At line 47 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + None +Comment: __heap_base unused +__heap_limit 00000200 + +Symbol: __heap_limit + Definitions + At line 49 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + None +Comment: __heap_limit unused +4 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +RESET 00000000 + +Symbol: RESET + Definitions + At line 56 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + None +Comment: RESET unused +__Vectors 00000000 + +Symbol: __Vectors + Definitions + At line 61 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 57 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 124 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +__Vectors_End 000000EC + +Symbol: __Vectors_End + Definitions + At line 122 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 58 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 124 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Relocatable symbols + +.text 00000000 + +Symbol: .text + Definitions + At line 126 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + None +Comment: .text unused +ADC1_2_IRQHandler 0000001A + +Symbol: ADC1_2_IRQHandler + Definitions + At line 247 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 97 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 203 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +BusFault_Handler 0000000E + +Symbol: BusFault_Handler + Definitions + At line 156 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 66 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 157 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +CAN1_RX1_IRQHandler 0000001A + +Symbol: CAN1_RX1_IRQHandler + Definitions + At line 250 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 100 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 206 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +CAN1_SCE_IRQHandler 0000001A + +Symbol: CAN1_SCE_IRQHandler + Definitions + At line 251 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 101 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 207 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +DMA1_Channel1_IRQHandler 0000001A + +Symbol: DMA1_Channel1_IRQHandler + Definitions + At line 240 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 90 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 196 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +DMA1_Channel2_IRQHandler 0000001A + +Symbol: DMA1_Channel2_IRQHandler + Definitions + At line 241 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + + + +ARM Macro Assembler Page 2 Alphabetic symbol ordering +Relocatable symbols + + At line 91 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 197 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +DMA1_Channel3_IRQHandler 0000001A + +Symbol: DMA1_Channel3_IRQHandler + Definitions + At line 242 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 92 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 198 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +DMA1_Channel4_IRQHandler 0000001A + +Symbol: DMA1_Channel4_IRQHandler + Definitions + At line 243 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 93 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 199 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +DMA1_Channel5_IRQHandler 0000001A + +Symbol: DMA1_Channel5_IRQHandler + Definitions + At line 244 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 94 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 200 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +DMA1_Channel6_IRQHandler 0000001A + +Symbol: DMA1_Channel6_IRQHandler + Definitions + At line 245 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 95 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 201 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +DMA1_Channel7_IRQHandler 0000001A + +Symbol: DMA1_Channel7_IRQHandler + Definitions + At line 246 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 96 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 202 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +DebugMon_Handler 00000014 + +Symbol: DebugMon_Handler + Definitions + At line 170 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 73 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 171 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +Default_Handler 0000001A + + + + +ARM Macro Assembler Page 3 Alphabetic symbol ordering +Relocatable symbols + +Symbol: Default_Handler + Definitions + At line 183 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + None +Comment: Default_Handler unused +EXTI0_IRQHandler 0000001A + +Symbol: EXTI0_IRQHandler + Definitions + At line 235 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 85 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 191 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +EXTI15_10_IRQHandler 0000001A + +Symbol: EXTI15_10_IRQHandler + Definitions + At line 269 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 119 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 225 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +EXTI1_IRQHandler 0000001A + +Symbol: EXTI1_IRQHandler + Definitions + At line 236 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 86 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 192 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +EXTI2_IRQHandler 0000001A + +Symbol: EXTI2_IRQHandler + Definitions + At line 237 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 87 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 193 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +EXTI3_IRQHandler 0000001A + +Symbol: EXTI3_IRQHandler + Definitions + At line 238 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 88 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 194 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +EXTI4_IRQHandler 0000001A + +Symbol: EXTI4_IRQHandler + Definitions + At line 239 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 89 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 195 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + + + +ARM Macro Assembler Page 4 Alphabetic symbol ordering +Relocatable symbols + + +EXTI9_5_IRQHandler 0000001A + +Symbol: EXTI9_5_IRQHandler + Definitions + At line 252 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 102 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 208 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +FLASH_IRQHandler 0000001A + +Symbol: FLASH_IRQHandler + Definitions + At line 233 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 83 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 189 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +HardFault_Handler 0000000A + +Symbol: HardFault_Handler + Definitions + At line 146 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 64 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 147 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +I2C1_ER_IRQHandler 0000001A + +Symbol: I2C1_ER_IRQHandler + Definitions + At line 261 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 111 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 217 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +I2C1_EV_IRQHandler 0000001A + +Symbol: I2C1_EV_IRQHandler + Definitions + At line 260 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 110 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 216 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +I2C2_ER_IRQHandler 0000001A + +Symbol: I2C2_ER_IRQHandler + Definitions + At line 263 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 113 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 219 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +I2C2_EV_IRQHandler 0000001A + +Symbol: I2C2_EV_IRQHandler + Definitions + + + +ARM Macro Assembler Page 5 Alphabetic symbol ordering +Relocatable symbols + + At line 262 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 112 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 218 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +MemManage_Handler 0000000C + +Symbol: MemManage_Handler + Definitions + At line 151 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 65 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 152 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +NMI_Handler 00000008 + +Symbol: NMI_Handler + Definitions + At line 141 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 63 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 142 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +PVD_IRQHandler 0000001A + +Symbol: PVD_IRQHandler + Definitions + At line 230 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 80 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 186 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +PendSV_Handler 00000016 + +Symbol: PendSV_Handler + Definitions + At line 174 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 75 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 175 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +RCC_IRQHandler 0000001A + +Symbol: RCC_IRQHandler + Definitions + At line 234 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 84 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 190 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +RTCAlarm_IRQHandler 0000001A + +Symbol: RTCAlarm_IRQHandler + Definitions + At line 270 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 120 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 226 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + + + + +ARM Macro Assembler Page 6 Alphabetic symbol ordering +Relocatable symbols + +RTC_IRQHandler 0000001A + +Symbol: RTC_IRQHandler + Definitions + At line 232 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 82 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 188 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +Reset_Handler 00000000 + +Symbol: Reset_Handler + Definitions + At line 129 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 62 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 130 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +SPI1_IRQHandler 0000001A + +Symbol: SPI1_IRQHandler + Definitions + At line 264 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 114 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 220 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +SPI2_IRQHandler 0000001A + +Symbol: SPI2_IRQHandler + Definitions + At line 265 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 115 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 221 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +SVC_Handler 00000012 + +Symbol: SVC_Handler + Definitions + At line 165 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 72 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 166 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +SysTick_Handler 00000018 + +Symbol: SysTick_Handler + Definitions + At line 178 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 76 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 179 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +TAMPER_IRQHandler 0000001A + +Symbol: TAMPER_IRQHandler + Definitions + At line 231 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + + + +ARM Macro Assembler Page 7 Alphabetic symbol ordering +Relocatable symbols + + Uses + At line 81 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 187 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +TIM1_BRK_IRQHandler 0000001A + +Symbol: TIM1_BRK_IRQHandler + Definitions + At line 253 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 103 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 209 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +TIM1_CC_IRQHandler 0000001A + +Symbol: TIM1_CC_IRQHandler + Definitions + At line 256 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 106 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 212 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +TIM1_TRG_COM_IRQHandler 0000001A + +Symbol: TIM1_TRG_COM_IRQHandler + Definitions + At line 255 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 105 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 211 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +TIM1_UP_IRQHandler 0000001A + +Symbol: TIM1_UP_IRQHandler + Definitions + At line 254 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 104 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 210 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +TIM2_IRQHandler 0000001A + +Symbol: TIM2_IRQHandler + Definitions + At line 257 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 107 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 213 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +TIM3_IRQHandler 0000001A + +Symbol: TIM3_IRQHandler + Definitions + At line 258 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 108 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 214 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +TIM4_IRQHandler 0000001A + + + +ARM Macro Assembler Page 8 Alphabetic symbol ordering +Relocatable symbols + + +Symbol: TIM4_IRQHandler + Definitions + At line 259 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 109 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 215 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +USART1_IRQHandler 0000001A + +Symbol: USART1_IRQHandler + Definitions + At line 266 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 116 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 222 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +USART2_IRQHandler 0000001A + +Symbol: USART2_IRQHandler + Definitions + At line 267 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 117 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 223 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +USART3_IRQHandler 0000001A + +Symbol: USART3_IRQHandler + Definitions + At line 268 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 118 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 224 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +USBWakeUp_IRQHandler 0000001A + +Symbol: USBWakeUp_IRQHandler + Definitions + At line 271 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 121 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 227 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +USB_HP_CAN1_TX_IRQHandler 0000001A + +Symbol: USB_HP_CAN1_TX_IRQHandler + Definitions + At line 248 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 98 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 204 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +USB_LP_CAN1_RX0_IRQHandler 0000001A + +Symbol: USB_LP_CAN1_RX0_IRQHandler + Definitions + At line 249 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + + + +ARM Macro Assembler Page 9 Alphabetic symbol ordering +Relocatable symbols + + At line 99 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 205 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +UsageFault_Handler 00000010 + +Symbol: UsageFault_Handler + Definitions + At line 161 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 67 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 162 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +WWDG_IRQHandler 0000001A + +Symbol: WWDG_IRQHandler + Definitions + At line 229 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 79 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 185 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +__user_initial_stackheap 0000001C + +Symbol: __user_initial_stackheap + Definitions + At line 293 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 291 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s +Comment: __user_initial_stackheap used once +56 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +Absolute symbols + +Heap_Size 00000200 + +Symbol: Heap_Size + Definitions + At line 44 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 48 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 297 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +Stack_Size 00000400 + +Symbol: Stack_Size + Definitions + At line 33 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 36 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + At line 296 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + +__Vectors_Size 000000EC + +Symbol: __Vectors_Size + Definitions + At line 124 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 59 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s +Comment: __Vectors_Size used once +3 symbols + + + +ARM Macro Assembler Page 1 Alphabetic symbol ordering +External symbols + +SystemInit 00000000 + +Symbol: SystemInit + Definitions + At line 132 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 133 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s +Comment: SystemInit used once +__main 00000000 + +Symbol: __main + Definitions + At line 131 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + At line 135 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s +Comment: __main used once +__use_two_region_memory 00000000 + +Symbol: __use_two_region_memory + Definitions + At line 290 in file ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s + Uses + None +Comment: __use_two_region_memory unused +3 symbols +408 symbols in table diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/ExtDll.iex b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/ExtDll.iex new file mode 100644 index 0000000..6c0896e --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/ExtDll.iex @@ -0,0 +1,2 @@ +[EXTDLL] +Count=0 diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.axf b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.axf new file mode 100644 index 0000000..7ef8f75 Binary files /dev/null and b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.axf differ diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.build_log.htm b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.build_log.htm new file mode 100644 index 0000000..358da77 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.build_log.htm @@ -0,0 +1,44 @@ + + +
+
Vision Build Log

+
Tool Versions:

+IDE-Version: Vision V5.21.1.0
+Copyright (C) 2016 ARM Ltd and ARM Germany GmbH. All rights reserved.
+License Information: xx admin, xx, LIC=0VRJ7-EB01S-XCWJ0-BYUVP-JJCCH-ZX68Z
+ 
+Tool Versions:
+Toolchain:       MDK-ARM Professional  Version: 5.21a
+Toolchain Path:  D:\Program Files\Keilv5\ARM\ARMCC\Bin
+C Compiler:      Armcc.exe V5.06 update 3 (build 300)
+Assembler:       Armasm.exe V5.06 update 3 (build 300)
+Linker/Locator:  ArmLink.exe V5.06 update 3 (build 300)
+Library Manager: ArmAr.exe V5.06 update 3 (build 300)
+Hex Converter:   FromElf.exe V5.06 update 3 (build 300)
+CPU DLL:         SARMCM3.DLL V5.21a
+Dialog DLL:      DCM.DLL V1.13.8.0
+Target DLL:      STLink\ST-LINKIII-KEIL_SWO.dll V2.0.18.0
+Dialog DLL:      TCM.DLL V1.14.14.0
+ 
+
Project:

+D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\Project.uvprojx
+Project File Date:  01/10/2024
+
+
Output:

+*** Using Compiler 'V5.06 update 3 (build 300)', folder: 'D:\Program Files\Keilv5\ARM\ARMCC\Bin'
+Build target 'PROJECT'
+compiling main.c...
+linking...
+Program Size: Code=18766 RO-data=2586 RW-data=668 ZI-data=1700  
+FromELF: creating hex file...
+"..\Output\Project.axf" - 0 Error(s), 0 Warning(s).
+
+
Collection of Component include folders:

+  D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE
+  D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include
+
+
Collection of Component Files used:

+Build Time Elapsed:  00:00:01
+
+ + diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.hex b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.hex new file mode 100644 index 0000000..95b864d --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.hex @@ -0,0 +1,1354 @@ +:020000040800F2 +:100000004009002025020008353300083733000876 +:100010003B3300083F330008433300080000000072 +:10002000000000000000000000000000473300084E +:1000300049330008000000004B3300083D0200086F +:100040003F0200083F0200083F0200083F0200088C +:100050003F0200083F0200083F0200083F0200087C +:100060003F0200083F0200083F0200083F0200086C +:100070003F0200083F0200083F0200083F0200085C +:100080003F0200083F0200083F0200083F0200084C +:100090003F0200083F0200083F0200083F0200083C +:1000A0003F0200083F0200083F0200083F0200082C +:1000B000212700083F020008092700083F02000826 +:1000C0003F0200083F0200083F0200083F0200080C +:1000D0003F020008ED200008153200083F0200082A +:1000E0003F0200083F0200083F0200083F020008EC +:1000F0003F0200083F0200083F0200083F020008DC +:100100003F0200083F0200083F0200083F020008CB +:100110003F0200083F020008E52E00083F020008E9 +:100120003F0200083F0200083F0200083F020008AB +:1001300000F002F800F067F80AA090E8000C824492 +:100140008344AAF10107DA4501D100F05CF8AFF26F +:10015000090EBAE80F0013F0010F18BFFB1A43F0A5 +:1001600001031847C8510000E85100000A444FF04D +:10017000000C10F8013B13F0070408BF10F8014B06 +:100180001D1108BF10F8015B641E05D010F8016B4B +:10019000641E01F8016BF9D113F0080F1EBF10F8AF +:1001A000014BAD1C0C1B09D16D1E58BF01F801CBD2 +:1001B000FAD505E014F8016B01F8016B6D1EF9D555 +:1001C0009142D6D37047000000230024002500266A +:1001D000103A28BF78C1FBD8520728BF30C148BFAA +:1001E0000B607047662904F04884002070471FB5F3 +:1001F00003F09CFB04000020002104F0DFF8E06025 +:100200001FBD10B510BD03F08DFC1146FFF7EFFFC9 +:1002100003F02EF803F0ABFC03B4FFF7F2FF03BCCE +:1002200003F0EEFC0948804709480047FEE7FEE777 +:10023000FEE7FEE7FEE7FEE7FEE7FEE7FEE7FEE796 +:1002400004480549054A064B70470000430300086F +:100250003101000840030020400900204005002033 +:10026000400500200CB50020019000906C4800680B +:1002700040F480306A49086000BF6948006800F4B3 +:10028000003000900198401C0190009818B9019826 +:10029000B0F5A06FF1D16248006800F4003010B1F1 +:1002A0000120009001E0002000900098012843D137 +:1002B0005C48006840F010005A4908600846006831 +:1002C00020F0030008600846006840F00200086063 +:1002D00053484068524948600846406848600846AC +:1002E000406840F4806048600846406820F47C1014 +:1002F00048600846406840F4E810486008460068D6 +:1003000040F08070086000BF4548006800F0007051 +:100310000028F9D04248406820F003004049486076 +:100320000846406840F00200486000BF3C48406812 +:1003300000F00C000828F9D10CBD10B5FFF792FFB2 +:1003400010BD10B53648006840F00100344908601F +:10035000084640683449084031494860084600680A +:10036000324908402E4908600846006820F4802081 +:1003700008600846406820F4FE0048604FF41F0003 +:100380008860FFF7DAFF4FF000602949086010BD70 +:1003900010B5002100200022214B5B6803F00C0106 +:1003A00021B1042906D0082928D107E0214B224C8D +:1003B000236027E01F4B204C236023E0184B5B6831 +:1003C00003F47010164B5B6803F48032022303EBD6 +:1003D000904022B9194B4343174C23600DE0104B5A +:1003E0005B6803F4003323B1144B4343124C236086 +:1003F00003E0104B4343104C236003E00D4B0E4CC5 +:10040000236000BF00BF064B5B68C3F303130C4CB3 +:10041000E15C094B1B68CB40074C236010BD00001A +:1004200000100240002002400000FFF8FFFFF6FE2F +:1004300008ED00E000127A000000002000093D00F5 +:100440000400002031490143314A1160704770B502 +:10045000002100230F22C47804B32D4C246804F437 +:10046000E064C4F5E064210AC1F10403CA404478A1 +:1004700004FA03F18478144021430901254C0678DD +:10048000A155047804F01F050124AC4005786D11D6 +:10049000AD0005F1E025C5F8004109E0047804F05D +:1004A0001F050124AC401C4D0678761145F8264006 +:1004B00070BD1A4A0A400243154B1B1F1A60704751 +:1004C00039B1134A121D12680243114B1B1D1A60E9 +:1004D00006E00F4A121D126882430D4B1B1D1A6065 +:1004E0007047042808D14FF0E021096941F0040168 +:1004F0004FF0E022116107E04FF0E021096921F09F +:1005000004014FF0E0221161704700000000FA057D +:100510000CED00E000E400E080E100E080FFFF1F60 +:1005200010B50446CC48844208D10121042000F0D3 +:100530002DFB0021042000F029FB46E0C74884423F +:1005400008D10121082000F021FB0021082000F043 +:100550001DFB3AE0C248844208D10121102000F07E +:1005600015FB0021102000F011FB2EE0BD48844255 +:1005700008D10121202000F009FB0021202000F0FB +:1005800005FB22E0B848844208D10121402000F058 +:10059000FDFA0021402000F0F9FA16E0B348844249 +:1005A00008D10121802000F0F1FA0021802000F024 +:1005B000EDFA0AE0AE48844207D10121801500F02F +:1005C000E5FA0021A01500F0E1FA10BD10B50121F7 +:1005D000084600F0DBFA0021012000F0D7FA10BD38 +:1005E0002DE9F041024600250026002000230024CA +:1005F000002791F803C00CF00F0591F803C00CF030 +:10060000100CBCF1000F03D091F802C04CEA0505B4 +:1006100091F800C0BCF1000F31D0146800202BE02D +:100620004FF0010C0CFA00F3B1F800C00CEA03061D +:100630009E4220D183004FF00F0C0CFA03F7BC430D +:1006400005FA03FC4CEA040491F803C0BCF1280F3E +:1006500006D14FF0010C0CFA00FCC2F814C00AE0FD +:1006600091F803C0BCF1480F05D14FF0010C0CFA12 +:1006700000FCC2F810C0401C0828D1D31460B1F8A7 +:1006800000C0BCF1FF0F34DD546800202EE000F103 +:10069000080C4FF0010808FA0CF3B1F800C00CEA9E +:1006A00003069E4221D183004FF00F0C0CFA03F792 +:1006B000BC4305FA03FC4CEA040491F803C0BCF106 +:1006C000280F05D100F1080C08FA0CF8C2F81480C4 +:1006D00091F803C0BCF1480F07D100F1080C4FF0AE +:1006E000010808FA0CF8C2F81080401C0828CED384 +:1006F0005460BDE8F0814FF6FF71018002218170E6 +:100700000421C17070470246002093680B400BB172 +:10071000012000E0002070470146886880B27047E1 +:1007200002460020D3680B400BB1012000E00020FE +:1007300070470146C86880B27047016170474161E7 +:1007400070470AB1016100E041617047C1607047C4 +:100750004FF480320A4382618161826182698269D9 +:10076000704702460020434B18684FF680731840CC +:1007700040EA021008433F4B186070473E49C86189 +:100780007047F0B50A46002300240021002500F040 +:100790000046B6F1004F02D1364EF16901E0354E08 +:1007A0007168C0F3034583B200F44016B6F5401FEC +:1007B00008D121F070612F4E766826F070662D4FBB +:1007C0007E6012E000F48016B6F5801F06D1032685 +:1007D00006FA05F4A14341F0706106E0460D3601CA +:1007E00003FA06F6B14341F0706122B1460D3601BD +:1007F00003FA06F6314300F00046B6F1004F02D18D +:100800001C4EF16101E01B4E7160F0BD30B500225D +:100810008B071C0F0F2303FA04F2164B08338C10BE +:1008200053F824309343134C08348D1044F825308A +:1008300023468C1053F824308C07240F00FA04F45C +:1008400023430C4C08348D1044F8253030BD0A4940 +:10085000DC3108607047000000080140000C0140D6 +:10086000001001400014014000180140001C01402C +:10087000002001400000014000002042DF480068E5 +:1008800040F00100DD49086008464068DC49084046 +:10089000DA49486008460068DA490840D7490860E4 +:1008A0000846006820F4802008600846406820F46C +:1008B000FE0048604FF41F0088607047CF49096808 +:1008C00021F48031CD4A11601146096821F480215C +:1008D0001160B0F5803F03D0B0F5802F0ED106E057 +:1008E000C649096841F48031C44A116007E0C34930 +:1008F000096841F4A021C14A116000E000BF00BFB7 +:10090000704710B501460022002300204A11012A39 +:1009100002D1BA4C236806E0022A02D1B74C236AFE +:1009200001E0B64C636A01F01F02012494401C40B0 +:100930000CB1012000E0002010BD38B5002000906F +:100940000024002500BF3120FFF7DBFF054600989B +:10095000401C00900098B0F5A06F01D0002DF2D09F +:100960003120FFF7CEFF08B1012400E0002420462B +:1009700038BD01460020A14A106820F0F80040EA86 +:10098000C10010607047A04908607047024600200F +:100990009A4B586820F47C1042EA01031843974BA5 +:1009A0005860704798490866704701460020934A8E +:1009B000506820F003000843506070478F4840683B +:1009C00000F00C007047014600208C4A506820F06F +:1009D000F00008435060704701460020874A506885 +:1009E00020F4E06008435060704701460020834ACD +:1009F000506820F4605040EAC1005060704729B14F +:100A00007E4A527A02437D4B5A7204E07B4A527A04 +:100A100082437A4B5A7270477B49D83108607047DD +:100A200001460020754A506820F440400843506059 +:100A300070470021714A20321170704A82F82010EC +:100A4000012802D004280AD104E001216B4A203297 +:100A5000117005E00521694A2032117000E000BFE5 +:100A600000BF70476949086070476449096A0143DB +:100A7000624A11627047654944390860704730B571 +:100A800000210022002400235C4D6D6805F00C015C +:100A900021B1042905D0082923D105E05C4D05606A +:100AA00022E05B4D05601FE0544D6D6805F4701247 +:100AB000524D6D6805F48034022505EB92421CB955 +:100AC000544D554305600BE04C4D6D6805F4003501 +:100AD0001DB1504D5543056002E04D4D5543056035 +:100AE00002E04B4D056000BF00BF444D6D6805F04E +:100AF000F0010909484D6B5C0568DD4045603F4DDC +:100B00006D6805F4E061090A434D6B5C4568DD40A2 +:100B100085603A4D6D6805F46051C90A3E4D6B5CC5 +:100B20004568DD40C560354D6D6805F44041890B71 +:100B30003A4D6B5CC568B5FBF3F5056130BD29B175 +:100B40002E4A526902432D4B5A6104E02B4A5269E6 +:100B500082432A4B5A61704729B1284A926902435D +:100B6000264B9A6104E0254A92698243234B9A619D +:100B7000704729B1214AD2690243204BDA6104E06F +:100B80001E4AD26982431D4BDA61704729B11B4A64 +:100B9000D2680243194BDA6004E0184AD2688243F3 +:100BA000164BDA60704729B1144A12690243134B9D +:100BB0001A6104E0114A12698243104B1A617047AE +:100BC00012494039086070470F49C86470470B49A3 +:100BD000C87170470948406A40F080700749486210 +:100BE000704701460020054A92680A400AB1012078 +:100BF00000E00020704701498872704700100240F1 +:100C00000000FFF8FFFFF6FE00004242800442426F +:100C100000127A0000093D0014000020240000208A +:100C200010B50446FE48844208D10121C014FFF7E4 +:100C3000ADFF0021E014FFF7A9FFC4E0B4F1804F3D +:100C400008D101210846FFF7AEFF00210120FFF780 +:100C5000AAFFB8E0F348844208D101210220FFF73F +:100C6000A2FF00210220FFF79EFFACE0EE48844285 +:100C700008D101210420FFF796FF00210420FFF78F +:100C800092FFA0E0E948844208D101210820FFF743 +:100C90008AFF00210820FFF786FF94E0E4488442A1 +:100CA00008D101211020FFF77EFF00211020FFF75F +:100CB0007AFF88E0DF48844208D101212020FFF735 +:100CC00072FF00212020FFF76EFF7CE0DA488442AB +:100CD00008D101214014FFF759FF00216014FFF7EC +:100CE00055FF70E0D548844209D10121C804FFF7BF +:100CF0004DFF00214FF40020FFF748FF63E0D0488C +:100D0000844209D101210805FFF740FF00214FF47B +:100D10008010FFF73BFF56E0CA48844209D1012109 +:100D20004805FFF733FF00214FF40010FFF72EFFB7 +:100D300049E0C548844208D101214020FFF733FF34 +:100D400000214020FFF72FFF3DE0C048844208D13A +:100D500001218020FFF727FF00218020FFF723FFDC +:100D600031E0BB48844208D101218015FFF71BFF09 +:100D70000021A015FFF717FF25E0B648844209D1EE +:100D800001210804FFF702FF00214FF48030FFF734 +:100D9000FDFE18E0B048844209D101214804FFF764 +:100DA000F5FE00214FF40030FFF7F0FE0BE0AB48FA +:100DB000844208D101218804FFF7E8FE00214FF4A6 +:100DC0008020FFF7E3FE10BD00220288944B98427A +:100DD0000ED0994B98420BD0B0F1804F08D0914B78 +:100DE000984205D0904B984202D0904B984204D143 +:100DF0004FF68F731A404B881A438D4B984207D099 +:100E00008C4B984204D04FF6FF431A40CB881A43CC +:100E100002808B8883850B880385814B98420BD099 +:100E2000854B984208D08B4B984205D08A4B98420C +:100E300002D08A4B984201D10B7A03860123838228 +:100E4000704770B5002400220023058C4FF6FE7613 +:100E500035400584028C8388048B4FF68F752C40B7 +:100E6000B51E2C400D882C43751E2A400D892A433F +:100E70004D882A436A4DA8420BD06F4DA84208D036 +:100E8000744DA84205D0744DA84202D0734DA842BB +:100E900013D14FF6F7752A404D892A434FF6FB755B +:100EA0002A408D882A434FF6FF652B404FF6FF55A9 +:100EB0002B408D892B43CD892B4383800483CD88A0 +:100EC0008586028470BD70B5002400220023058C45 +:100ED0004FF6EF7635400584028C8388048B48F604 +:100EE000FF752C404FF6FF452C400D884FF6FF76DE +:100EF00006EA05252C434FF6DF752A400D8906EAE0 +:100F000005152A434D8806EA05152A43444DA84293 +:100F100002D0494DA8421DD14FF67F752A404D8918 +:100F20004FF6FF7606EA05152A434FF6BF752A40AD +:100F30008D8806EA05152A434FF6FF352B404FF200 +:100F4000FF752B408D8906EA85052B43CD8906EA7E +:100F500085052B4383800483CD880587028470BD7B +:100F600070B5002400220023058C4FF6FF66354043 +:100F70000584028C8388848B4FF68F752C404FF646 +:100F8000FC752C400D882C434FF6FF552A400D89E7 +:100F90004FF6FF7606EA05252A434D8806EA052521 +:100FA0002A431F4DA84202D0234DA8421DD14FF223 +:100FB000FF752A404D894FF6FF7606EA05252A433C +:100FC0004FF6FF352A408D8806EA05252A434EF65E +:100FD000FF752B404DF6FF752B408D8906EA0515F0 +:100FE0002B43CD8906EA05152B4383808483CD8866 +:100FF0008587028470BD70B5002200230024058C13 +:101000004EF6FF7635400584038C8488828B48F643 +:10101000FF752A404FF6FF452A400D8820E000006A +:10102000002C01400004004000080040000C00407B +:10103000001000400014004000340140004C01400A +:10104000005001400054014000180040001C0040C6 +:1010500000200040004001400044014000480140A1 +:101060004FF6FF7606EA05252A434DF6FF752B401D +:101070000D8906EA05352B434D8806EA05352B43D5 +:10108000FA4DA84202D0FA4DA84208D14BF6FF759E +:101090002C408D894FF6FF7606EA85152C43848017 +:1010A0008283CD88A0F84050038470BD828B4FF2BC +:1010B000FF331A408283828B4FF6FF7303EA0123CA +:1010C0001A4382837047F0B50C4615460022002172 +:1010D0000026078C4EF6FF7C07EA0C070784828BFC +:1010E000018C4FF6FF7707EA043640F6FF473A4097 +:1010F0004FF6FF7707EA05273A434FF6FF7707EAEF +:1011000003373A43D94FB8420ED0D94FB8420BD02B +:10111000B0F1804F08D0D74FB84205D0D64FB84273 +:1011200002D0D64FB84206D14DF6FF77394046F48B +:101130008057394305E047F6FF57394044F480575C +:10114000394382830184F0BD828B4FF6F3731A40DA +:101150008283828B0A4382837047F0B50C46154622 +:10116000002200210026078C4FF6FF6C07EA0C07CF +:101170000784828B018C4FF6FF7707EA04264FF62F +:101180000C773A404FF6FF7707EA03172F433A43AD +:10119000B64FB8420ED0B64FB8420BD0B0F1804F28 +:1011A00008D0B44FB84205D0B34FB84202D0B34FC5 +:1011B000B84206D14FF6FF57394046F4807739439D +:1011C00005E04FF2FF57394044F48077394382837A +:1011D0000184F0BD028B4FF2FF331A400283028B71 +:1011E0004FF6FF7303EA01231A4302837047F0B5F9 +:1011F0000C461546002200210026078C4FF6EF7C96 +:1012000007EA0C070784028B018C4FF6FF7707EA89 +:10121000041640F6FF473A404FF6FF7707EA0337D8 +:101220003A434FF6FF7707EA05273A438F4FB84214 +:101230000ED08F4FB8420BD0B0F1804F08D08D4FF9 +:10124000B84205D08C4FB84202D08C4FB84206D17C +:101250004FF6DF77394046F01007394305E04FF687 +:101260005F77394044F01007394302830184F0BDB1 +:10127000028B4FF6F3731A400283028B0A430283F8 +:101280007047F0B50C46154600220021068C4FF63B +:10129000FE773E400684028B018C4FF60C7632407E +:1012A0007E1C06EA03162E433243704EB0420ED027 +:1012B0006F4EB0420BD0B0F1804F08D06D4EB042AF +:1012C00005D06D4EB04202D06C4EB04206D14FF602 +:1012D000FD76314044F00106314305E04FF6F576E6 +:1012E000314044F00106314302830184F0BD70B502 +:1012F00005460C465D4885420ED05D4885420BD0C0 +:10130000B5F1804F08D05B48854205D05A488542E8 +:1013100002D05A48854200D100E000BF208850B971 +:101320002389A28861882846FFF7ABFFE188284619 +:10133000FFF79EFF25E0208804280AD12389A28890 +:1013400061882846FFF753FFE1882846FFF742FFF0 +:1013500017E0208808280AD12389A28861882846B6 +:10136000FFF7FBFEE1882846FFF7EEFE09E0238940 +:10137000A28861882846FFF7A6FEE1882846FFF785 +:1013800095FE70BD2DE9F04105460C46002601276B +:10139000608808B9022600E00026A088012801D153 +:1013A000022700E001272088A0B92389A28861884C +:1013B0002846FFF766FFE1882846FFF759FF238993 +:1013C0003A4631462846FFF712FFE1882846FFF7E4 +:1013D00001FF13E02389A28861882846FFF707FFF1 +:1013E000E1882846FFF7F6FE23893A46314628462B +:1013F000FFF747FFE1882846FFF73AFFBDE8F08195 +:101400000A884B881A438B881A43CB881A430B8966 +:101410001A434B891A438B891A43A0F8442070471A +:101420004FF6FF71818000210180C18041800172EF +:1014300070470021018041808180C180018141810C +:101440008181C1817047002101804180012181801B +:101450000021C1800181704700210180418081808D +:10146000C18001814181818170470000002C0140D1 +:10147000003401400004004000080040000C00401F +:1014800021B1028842F00102028004E002884FF696 +:10149000FE731A400280704731B1B0F8442042F424 +:1014A0000042A0F8442005E0B0F84420C2F30E0248 +:1014B000A0F8442070471AB183890B43838102E06E +:1014C00083898B43838170478182704741EA02039D +:1014D000A0F8483070471AB183890B43838102E03A +:1014E00083898B438381704701894FF6F8721140DD +:1014F000018170470A46002101894FF68F73194018 +:1015000011430181704730B504460D4629462046F7 +:10151000FFF7F0FF208940F00700208130BD2DE962 +:10152000F04104460D4616461F46602D06D13B4647 +:10153000012231462046FFF75AFE05E03B460122D4 +:1015400031462046FFF79DFE29462046FFF7D2FF91 +:10155000208940F007002081BDE8F08130B50C46BD +:1015600000210189C9B24FF6FF7505EA032515432D +:1015700025432943018130BD2DE9F04105460E4642 +:1015800017469846002443463A4631462846FFF718 +:10159000E5FF2C894FF6F870044044F007044FF63D +:1015A0008F70044044F070042C81BDE8F081F0B5E8 +:1015B00004460D4616461F463B46324629462046FF +:1015C000FFF7CCFF208940F480402081F0BD0185E9 +:1015D000828270470A46002101884FF68F731940B6 +:1015E000114301807047F0B50C4615461E46002198 +:1015F000002200230189028B038C4FF6F8773940D3 +:1016000021434FF6FC473A4040F201173A434FF668 +:10161000DD773B404FF6FF7707EA06172F433B4342 +:10162000018102830384F0BD0A460021018B4FF63D +:101630008F7319401143018370470A460021018BC3 +:1016400048F6FF7319404FF6FF7303EA022319436C +:10165000018370470A460021818B4FF68F73194032 +:101660001143818370470A460021818B48F6FF733E +:1016700019404FF6FF7303EA022319438183704731 +:1016800021B1028842F08002028004E002884FF615 +:101690007F731A400280704721B1828842F00402B1 +:1016A000828004E082884FF6FB731A408280704784 +:1016B00021B1828842F00802828004E082884FF6DD +:1016C000F7731A408280704721B1828842F001028C +:1016D000828004E082884FF6FE731A408280704751 +:1016E0000A460021018B4FF6F7731940114301831D +:1016F00070470A460021018B4FF2FF7319404FF6E5 +:10170000FF7303EA02231943018370470A4600214D +:10171000818B4FF6F77319401143818370470A4656 +:101720000021818B4FF2FF7319404FF6FF7303EADC +:1017300002231943818370470A460021018B4FF62B +:10174000FB7319401143018370470A460021018B46 +:101750004FF6FF3319404FF6FF7303EA0223194394 +:10176000018370470A460021818B4FF6FB731940B5 +:101770001143818370470A460021818B4FF6FF3366 +:1017800019404FF6FF7303EA022319438183704720 +:101790000A460021018B4FF67F73194011430183E4 +:1017A00070470A460021018BC1F30E014FF6FF730B +:1017B00003EA02231943018370470A460021818B03 +:1017C0004FF67F7319401143818370470A46002109 +:1017D000818BC1F30E014FF6FF7303EA0223194315 +:1017E000818370470A460021018C4FF6FD73194032 +:1017F0001143018470470A460021018C4FF6F773AC +:1018000019401143018470470A460021018C4FF6AC +:10181000DF7319404FF6FF7303EA02131943018483 +:1018200070470A460021018C4FF67F7319404FF62E +:10183000FF7303EA02131943018470470A4600212B +:10184000018C4FF6FF5319404FF6FF7303EA022352 +:101850001943018470470A460021018C4FF2FF733F +:1018600019404FF6FF7303EA0223194301847047BE +:101870000A460021018C4DF6FF7319404FF6FF73A5 +:1018800003EA023319430184704730B50023012471 +:101890008C40A3B2048C9C430484048C02FA01F5AE +:1018A000ADB22C43048430BD30B5002304248C40F9 +:1018B000A3B2048C9C430484048C02FA01F5ADB2FB +:1018C0002C43048430BD70B5034600200024184624 +:1018D000183001258D40ACB21D8CA5431D8409B183 +:1018E000082909D100EB6100056825F07005056045 +:1018F0000568154305600EE00D1FC5F34E0528442D +:10190000056825F4E045056005684FF6FF7606EAB0 +:1019100002263543056070BD21B1028842F0020203 +:10192000028004E002884FF6FD731A40028070477F +:1019300021B1028842F00402028004E002884FF6DE +:10194000FB731A400280704721B1828842F0800206 +:10195000828004E082884FF67F731A40828070474D +:1019600002884FF6F7731A40028002880A43028009 +:10197000704782884FF68F731A40828082880A43AC +:101980008280704702894FF6F8731A4002810289FB +:101990000A430281704702894FF67F731A40028121 +:1019A00002890A43028170478184704781857047AC +:1019B000818670470187704781877047A0F8401083 +:1019C000704702884FF6FF431A40028002880A439C +:1019D000028070470146888E70470146088F704725 +:1019E0000146888F70470146B1F8400070470146B4 +:1019F000888C70470146088D704702460020138A84 +:101A00000B400BB1012000E000207047CA43028266 +:101A1000704730B50246002000230024158A05EAED +:101A20000103958905EA010413B10CB1012000E01E +:101A3000002030BDCA4302827047000010B5044642 +:101A4000FB48844209D101218803FFF79FF8002158 +:101A50004FF48040FFF79AF832E0F648844209D10B +:101A600001214804FFF79FF800214FF40030FFF7F1 +:101A70009AF825E0F048844209D101218804FFF753 +:101A800092F800214FF48020FFF78DF818E0EB4822 +:101A9000844209D10121C804FFF785F800214FF4E1 +:101AA0000020FFF780F80BE0E548844208D10121CF +:101AB0000805FFF778F800214FF48010FFF773F85E +:101AC00010BD2DE9F04786B005460E460024A2461B +:101AD00000BFA1460027B08900B100BF2F462C8A65 +:101AE0004CF6FF700440F08804432C82AC894EF61B +:101AF000F3100440B08831890843718908430443D6 +:101B0000AC81AC8A4FF6FF400440B0890443AC82FC +:101B100001A8FEF7B4FFC648874202D1DDF810A045 +:101B200001E0DDF80CA0A88900F4004040B10AEB08 +:101B3000CA0000EB0A1031684900B0FBF1F807E079 +:101B40000AEBCA0000EB0A1031688900B0FBF1F81B +:101B50006420B8FBF0F004012009642101FB108926 +:101B6000A88900F4004040B1322000EBC900B0FB6E +:101B7000F1F000F00700044308E0322000EB091008 +:101B80006421B0FBF1F000F00F0004432C8106B09B +:101B9000BDE8F0874FF41651016000218180C180BB +:101BA00001810C21418100218181704710B50246DD +:101BB0000020108A4FF2FF0318400B884C88234303 +:101BC0008C882343CC8823431843108210BD002106 +:101BD000018041808180C180704721B1828942F4B7 +:101BE0000052828104E082894DF6FF731A4082819F +:101BF0007047F0B50346002400260025002040F67B +:101C00006A17B94200D100BF1846C1F3421401F06F +:101C10001F06012707FA06F5012C01D10C3004E05C +:101C2000022C01D1103000E014301AB107682F43A4 +:101C3000076002E00768AF430760F0BD1AB1838A0E +:101C40000B43838202E0838A8B4383827047028A3C +:101C50004FF6F0731A400282028A0A4302827047EA +:101C600082894FF2FF731A40828182890A438281FE +:101C7000704721B1828942F00202828104E08289A8 +:101C80004FF6FD731A4082817047028A4FF6DF7368 +:101C90001A400282028A0A430282704721B1028AF4 +:101CA00042F48042028204E0028A4BF6FF731A403B +:101CB00002827047C1F3080282807047014688881B +:101CC000C0F308007047818941F0010181817047AC +:101CD000028BD2B20283028B42EA01220283704756 +:101CE000028B02F47F420283028B0A430283704715 +:101CF00021B1828A42F02002828204E0828A4FF679 +:101D0000DF731A408282704721B1828A42F010024A +:101D1000828204E0828A4FF6EF731A408282704713 +:101D200021B1828A42F00802828204E0828A4FF660 +:101D3000F7731A408282704721B1828942F40042CF +:101D4000828103E08289C2F30E028281704721B151 +:101D5000828A42F40062828204E0828A4FF2FF7338 +:101D60001A4082827047828A4FF6FB731A40828241 +:101D7000828A0A438282704721B1828A42F002023B +:101D8000828204E0828A4FF6FD731A408282704795 +:101D900002460020B1F5007F00D100BF13880B4040 +:101DA0000BB1012000E00020704701F40072B2F591 +:101DB000007F00D100BFCA430280704770B5024661 +:101DC000002400230025002040F66A16B14200D10D +:101DD00000BFC1F3421501F01F03012606FA03F309 +:101DE000012D02D19689334006E0022D02D1168AD8 +:101DF000334001E0968A33400C12012606FA04F4BF +:101E00001688344013B10CB1012000E0002070BDF1 +:101E100010B50022002340F66A14A14200D100BF91 +:101E20000A1201249440A3B2DC43048010BD0000D8 +:101E3000003801400044004000480040004C004091 +:101E40000050004070B5482000F07EF900F0C4F862 +:101E500000F08EF84FF4E13000F0C0F800F0ADFA79 +:101E600000F074FC002140F60F6000F0CFFA00F0A3 +:101E7000FEFE00F099FD02220021084600F08BFED4 +:101E800003220021102000F086FE102320A2002152 +:101E9000582000F063FE0C231FA20221002000F056 +:101EA0005DFE0C2320A20321002000F057FE10232A +:101EB00021A20421002000F051FE0C2322A20621C1 +:101EC000002000F04BFE0C2323A20721002000F08D +:101ED00045FE00F058FB47F230504FF080418884B7 +:101EE00000F09EFB47F230501F49088064210846ED +:101EF00000F0EEFA00F00EFB642000F03FF94FF422 +:101F0000FA752C4619480580001D048070BD00003C +:101F10006D2F6D696E0000004C656674203A2020BC +:101F2000202052504D00000052696768743A20200A +:101F3000202052504D000000503A202020493A20E5 +:101F40002020443A202020005365745F433A20202B +:101F5000202052504D0000005365745F503A2020FD +:101F600020206D2F6D696E00240800403C04004065 +:101F700008B501211020FEF7EFFD4FF40050ADF839 +:101F8000000010208DF8030003208DF80200694640 +:101F90000F48FEF725FB08BD70B504460D480068E4 +:101FA000401C0C490860A04210D14FF40051084871 +:101FB000FEF7A9FBC0F10100C5B22A464FF400515B +:101FC0000348FEF7BEFB00200249086070BD000018 +:101FD00000100140280000207047000010B586B0B6 +:101FE0000446012144F20400FEF7B6FD4FF40070F0 +:101FF000ADF8140018208DF8170003208DF8160096 +:1020000005A94C48FEF7ECFA4FF48060ADF81400D7 +:1020100004208DF8170005A94648FEF7E1FA01945F +:102020000020ADF80800ADF80A00ADF80C00ADF8DE +:1020300010000C20ADF80E0001A93F48FFF741FD4C +:10204000012240F225513C48FFF7D3FD01213A48D7 +:10205000FFF7C3FD06B010BD70B504460D46E1B2F2 +:102060003548FFF727FE00BF80213348FFF790FE79 +:102070000028F9D0204670BD10B5044600BF2021CD +:102080002D48FFF785FE0028F9D02B48FFF716FEF4 +:1020900010BD70B504460D4640212748FFF785FE68 +:1020A00080212548FFF7B4FE13E021782248FFF78E +:1020B00001FE00BF40212048FFF76AFE0128F9D148 +:1020C00040211D48FFF771FE80211B48FFF7A0FE4D +:1020D000641C281EA5F10105E7D170BD0022174B35 +:1020E0001A60174A1160174A1060704710B540F225 +:1020F00025511148FFF762FED8B10F48FFF7DEFD0A +:10210000C4B20F4800680D49096888420CD90D48CF +:10211000006804700B480068401C0A4908600748C2 +:102120000068401C0549086040F225510248FFF74D +:102130006FFE10BD00080140003801403000002053 +:10214000340000202C00002010B504466FF004007D +:10215000FEF7C7F9E11704EB5171C1F3C701234A38 +:1021600011701046007800EB4001C1EBC0104FF633 +:10217000FF7101EAC0001E49088010BD01461C4ADB +:1021800012884A434FF0E0235A6100229A610122EB +:102190001A6100BF4FF0E022106900F001021AB18D +:1021A00000F48032002AF5D000224FF0E0231A61BB +:1021B0009A61704701460D4A12784A434FF0E02376 +:1021C0005A6100229A6101221A6100BF4FF0E02299 +:1021D000106900F001021AB100F48032002AF5D033 +:1021E00000224FF0E0231A619A6170473800002006 +:1021F0003A000020002001E0411CC8B20A28FBDBA5 +:10220000704710B54FF400617F48FEF796FA4FF41F +:1022100080617D48FEF791FAFFF7ECFF4FF4006113 +:102220007948FEF78CFAFFF7E5FF4FF480617648B6 +:10223000FEF785FAFFF7DEFF10BD10B54FF4006121 +:102240007148FEF77CFA4FF480616F48FEF775FA2B +:10225000FFF7D0FF4FF400616B48FEF76EFA10BD38 +:1022600070B50446002528E004F0800028B14FF442 +:1022700000616548FEF761FA04E04FF400616248CE +:10228000FEF75DFAFFF7B6FF4FF480615E48FEF798 +:1022900054FAFFF7AFFF4FF480615B48FEF74FFA47 +:1022A000072D04D14FF400615748FEF746FA600647 +:1022B000040EFFF79FFF681CC5B2082DD4DB70BD6C +:1022C00010B54FF400615048FEF739FAFFF792FF5E +:1022D0004FF480614C48FEF730FAFFF78BFF4FF464 +:1022E00080614948FEF72BFAFFF784FF4FF4006145 +:1022F0004548FEF722FA10BD10B54FF40061424880 +:10230000FEF71BFAFFF776FF4FF480613E48FEF7B9 +:1023100014FAFFF76FFF4FF480613B48FEF70FFAA6 +:10232000FFF768FF10BD70B505460024002619E0D0 +:102330006006040E4FF480613348FEF7FEF9FFF7A4 +:1023400059FF4FF400613048FEF7DDF908B1601C19 +:10235000C4B24FF480612C48FEF7F1F9FFF74AFF51 +:10236000701CC6B2082EE3DB15B9FFF7C5FF01E00C +:10237000FFF7A6FF204670BD10B54FF4006122485C +:10238000FEF7DBF9FFF736FF4FF480611E48FEF7DA +:10239000D4F9FFF72FFF4FF400611B48FEF7B3F9A4 +:1023A00008B1012400E000244FF480611648FEF7D4 +:1023B000C6F9FFF71FFF204610BD08B50121082010 +:1023C000FEF7CAFB4FF44060ADF8000003208DF823 +:1023D000020014208DF8030069460B48FEF700F94F +:1023E000FFF72BFF08BD70B50446FFF7E6FFFFF7C8 +:1023F00008FF2046FFF734FFFFF7BEFF0546FFF753 +:102400001CFF284670BD0000000C014030B589B0AB +:1024100005460C4601210220FEF7ABFB681E80B288 +:10242000ADF80800A0B2ADF804000020ADF80A0035 +:10243000ADF8060001A9C048FEF7C6FC0121BE4860 +:10244000FFF7E4FA01221146BB48FFF734F80121F7 +:102450000820FEF781FB0320ADF8100018208DF84E +:10246000130003208DF8120004A9B448FEF7B8F851 +:102470006020ADF814000120ADF816000020ADF882 +:102480001A00ADF81C0005A9AB48FEF769FD08214C +:10249000A948FFF7D3F96020ADF814000120ADF88A +:1024A00016000020ADF81A00ADF81C0005A9A248DE +:1024B000FEF7A1FD0821A048FFF7DAF901219E48A7 +:1024C000FFF7DEF801219C48FEF7DAFF09B030BDC6 +:1024D0007FB505460C466020ADF800000120ADF840 +:1024E0000200ADF8065069469348FEF739FD082111 +:1024F0009148FFF7A3F9ADF8064069468E48FEF70C +:102500007AFD08218C48FFF7B3F901218A48FFF7CB +:10251000B7F87FBD1FB501211020FEF72AFB42F25C +:102520000F70ADF8080040F2CF20ADF80400002095 +:10253000ADF80A00ADF806008DF80C0001A980483E +:10254000FEF742FC01217E48FFF760FA01221146A6 +:102550007B48FEF7B0FF4FF44070FDF773FF362065 +:102560008DF8000005208DF8010000208DF8020094 +:1025700001208DF803006846FDF769FF01217048CE +:10258000FEF77EFF1FBD00B587B001210846FEF7AC +:10259000F0FA01210420FEF7DFFA0320ADF8000075 +:1025A00004208DF8030069466648FEF719F804A870 +:1025B000FEF736FF0020ADF810004EF66020ADF8B3 +:1025C00014000020ADF81600ADF8120004A94FF079 +:1025D0008040FEF7F9FB00231A4603214FF08040AC +:1025E000FFF701F801A8FEF72EFF0A20ADF80C0056 +:1025F00001A94007FEF77BFE01218807FFF706FAD5 +:10260000012211469007FEF756FF00214FF080404F +:10261000FFF7CAF901218807FEF732FF07B000BDB6 +:1026200000B587B001210420FEF7A3FA012108209C +:10263000FEF792FAC020ADF8000004208DF80300E8 +:1026400069463E48FDF7CCFF04A8FEF7E9FE0020EE +:10265000ADF810004EF66020ADF814000020ADF883 +:102660001600ADF8120004A93748FEF7ADFB0023B1 +:102670001A4603213448FEF7B6FF01A8FEF7E3FE31 +:102680000A20ADF80C0001A92F48FEF730FE012109 +:102690002D48FFF7BBF9012211462B48FEF70BFF2F +:1026A00000212948FFF780F901212748FEF7E8FEBD +:1026B00007B000BD0146022904D003290CD004292B +:1026C0001ED113E04FF08042928C10B247F230528C +:1026D0004FF080439A8415E0174A2432128810B2D2 +:1026E00047F23052144B24331A800BE0164A24323E +:1026F000128810B247F23052134B24331A8001E093 +:10270000002000BF00BF70470F48103000880E48FF +:102710001030008820F001000B491031088070470C +:102720004FF08040008A4FF08040008A20F0010086 +:102730004FF080410882704700040040000C0140C7 +:1027400000100040000801400008004008B50121C9 +:102750000820FEF701FA4FF47040ADF80000102099 +:102760008DF8030003208DF8020069463C48FDF710 +:1027700037FF08BD10B5044694B94FF4805138486E +:10278000FDF7DBFF4FF480413548FDF7D6FF4FF4EE +:1027900000413348FDF7D1FF40F2DC503149088059 +:1027A000012C0FD121032E48FDF7C9FFA1032C48AE +:1027B000FDF7C5FFE1032A48FDF7C1FF40F2DC50F9 +:1027C00028490880022C02D100202649088010BD2B +:1027D00010B504464CB94FF400512148FDF7ADFF48 +:1027E00040F2DC501F49091F0880012C08D1610309 +:1027F0001B48FDF7A4FF40F2DC501A49091F08806E +:10280000022C03D100201749091F088010BD10B504 +:102810000020FFF7AFFF0020FFF7DAFF10BD10B573 +:102820000120FFF7A7FF0120FFF7D2FF10BD10B571 +:102830000120FFF79FFF0020FFF7CAFF10BD10B572 +:102840000020FFF797FF0120FFF7C2FF10BD10B572 +:102850000220FFF78FFF0220FFF7BAFF10BD000034 +:10286000000C01404004004010B50446FFF7C9FCCD +:102870007820FFF7F5FCFFF77FFD0020FFF7F0FC65 +:10288000FFF77AFD2046FFF7EBFCFFF775FDFFF73A +:10289000D4FC10BD10B50446FFF7B3FC7820FFF759 +:1028A000DFFCFFF769FD4020FFF7DAFCFFF764FD6E +:1028B0002046FFF7D5FCFFF75FFDFFF7BEFC10BD1C +:1028C00070B504460D461DB1E0B2FFF7E3FF02E02C +:1028D000E0B2FFF7C9FF70BD70B50646002418E0EE +:1028E00004F1B0000021FFF7EBFF00210846FFF7DD +:1028F000E7FF00211020FFF7E3FF002505E001219D +:102900003046FFF7DDFF681CC5B2802DF7DB601C89 +:10291000C4B2082CE4DB70BD06E041F6650100E0BE +:10292000491E0029FCD1401E0028F6D170470146FF +:1029300005E0002001E0421CD0B27B28FBDB0A1E30 +:10294000A1F10101F5D1704770B504460D4605F1BE +:10295000B0000021FFF7B4FF102141EA141000215C +:10296000FFF7AEFF04F00F000021FFF7A9FF70BDD5 +:1029700010B500218D20FFF7A3FF00211420FFF7E1 +:102980009FFF0021AF20FFF79BFF10BD10B5002176 +:102990008D20FFF795FF00211020FFF791FF002108 +:1029A000AE20FFF78DFF10BD70B5002418E004F1D4 +:1029B000B0000021FFF784FF00210846FFF780FFE9 +:1029C00000211020FFF77CFF002505E001210020F9 +:1029D000FFF776FF681CC5B2802DF7DB601CC4B220 +:1029E000082CE4DB70BD70B5002418E004F1B000E1 +:1029F0000021FFF765FF00210846FFF761FF002176 +:102A00001020FFF75DFF002505E001210846FFF7D4 +:102A100057FF681CC5B2802DF7DB601CC4B2082CC0 +:102A2000E4DB70BD2DE9F04707460E469046994617 +:102A300000250024A8F12000C5B27F2F02DD002769 +:102A4000B01CC6B2B9F1100F24D131463846FFF799 +:102A50007BFF002408E004EB0511BF4A505C012114 +:102A6000FFF72EFF601CC4B2082CF4DB701CC1B24F +:102A70003846FFF769FF002409E004EB051108312F +:102A8000B54A505C0121FFF71BFF601CC4B2082C43 +:102A9000F3DB12E031463846FFF756FF00240AE028 +:102AA00005EB4501AD4A02EB4101085D0121FFF74D +:102AB00007FF601CC4B2062CF2DBBDE8F08710B53E +:102AC0000246012000E050430B1EA1F10104E1B2D7 +:102AD000F9D110BD2DE9FF5F074691461E460E9DB8 +:102AE0004FF0000A002435E0301B401EC1B20A201E +:102AF000FFF7E5FFB9FBF0F00A21B0FBF1F201FBB3 +:102B00001208BAF1000F14D1701EA04211DDB8F105 +:102B1000000F0CD1AB4605EBDB71491001FB0471D2 +:102B2000C8B22B4620220199FFF77CFF10E04FF03E +:102B3000010AAB4605EBDB71491001FB0471C8B219 +:102B400008F13001CAB22B460199FFF76BFF00BFB5 +:102B5000601CC4B2B442C7DBBDE8FF9F2DE9F04161 +:102B600004460F461546984600260FE0AA5D4346E8 +:102B700039462046FFF756FF04F10800C4B2782C0E +:102B800002DD0024B81CC7B2701CC6B2A85D0028C4 +:102B9000ECD1BDE8F0812DE9F04180460E461546A6 +:102BA000002731464046FFF7CFFE00240AE06C4A7A +:102BB00002EB8511085D0121FFF782FE781CC7B288 +:102BC000601CC4B2102CF2DB701CC1B24046FFF78F +:102BD000BBFE00240CE06900491C614A02EB411174 +:102BE000085D0121FFF76CFE781CC7B2601CC4B2FF +:102BF000102CF0DBBDE8F0812DE9F05F06460F46B2 +:102C000090461C46DDF828A04FF0000BE11704EBBE +:102C10005171C910A4EBC10131B92046E11704EB91 +:102C20005171C1F3C70506E02046E11704EB51716D +:102C3000C910491CCDB23D4615E029463046FFF784 +:102C400083FEB1460BE059460BF1010B1AF8010067 +:102C50000121FFF735FE09F1010000F0FF09C14530 +:102C6000F1DB681CC5B2A542E7DBBDE8F09F10B5FB +:102C7000FFF7A3FB4FF44870FFF780FA0021AE2066 +:102C8000FFF71EFE00210846FFF71AFE0021102064 +:102C9000FFF716FE00214020FFF712FE0021B020B2 +:102CA000FFF70EFE00218120FFF70AFE0021FF2022 +:102CB000FFF706FE0021A120FFF702FE0021A6205B +:102CC000FFF7FEFD0021A820FFF7FAFD00213F20BD +:102CD000FFF7F6FD0021C820FFF7F2FD0021D32009 +:102CE000FFF7EEFD00210846FFF7EAFD0021D520A1 +:102CF000FFF7E6FD00218020FFF7E2FD0021D8204C +:102D0000FFF7DEFD00210520FFF7DAFD0021D920C5 +:102D1000FFF7D6FD0021F120FFF7D2FD0021DA20D8 +:102D2000FFF7CEFD00211220FFF7CAFD0021DB20B6 +:102D3000FFF7C6FD00213020FFF7C2FD00218D20E6 +:102D4000FFF7BEFD00211420FFF7BAFD0021AF20E0 +:102D5000FFF7B6FD10BD0000A64C00087E4A000833 +:102D60003C0000202DE9FE4355480468204601F050 +:102D700081FC064632460B4652A102A800F0E6FA54 +:102D8000102302AA04211846FFF7E8FE4F48056801 +:102D9000284601F06FFC064632460B4649A101A8C1 +:102DA00000F0D4FA102301AA04213820FFF7D6FE40 +:102DB0004748D0F80080404601F05CFC06463246A9 +:102DC0000B4640A1684600F0C1FA10236A46042170 +:102DD0006820FFF7C3FEBDE8FE832DE9FC5F0446D3 +:102DE0000D462E1B3B48006801F0EEFC8346384838 +:102DF0000168584601F000FD81463748006801F03F +:102E0000E3FC009031480168009801F0F5FC83462E +:102E1000304601F0D9FC009029480168009801F083 +:102E2000EBFC5946019001F0B3FD8246494601F0A2 +:102E30004DFC804601F0ACFC074627480068254958 +:102E40000860254806603846BDE8FC9F2DE9FC5F18 +:102E500004460D462E1B2148006801F0B5FC834650 +:102E60001B480168584601F0C7FC81461C480068B1 +:102E700001F0AAFC009015480168009801F0BCFC24 +:102E80008346304601F0A0FC00900D480168009890 +:102E900001F0B2FC5946019001F07AFD82464946A4 +:102EA00001F014FC804601F073FC07460C480068F2 +:102EB0000A4908600A4806603846BDE8FC9F0000E1 +:102EC0003C02002025312E31660000004002002027 +:102ED000440200204C02002048020020540200203E +:102EE000500200202DE9F84F01217948FEF785FDB9 +:102EF00000287DD001217648FEF79CFD0520FFF7D4 +:102F00004BF80220FFF7D6FBA0F5EA4030387149B4 +:102F100008600420FFF7CEFBA0F5EA4030386E4988 +:102F20000860084600686B49096800EB010A0AEB73 +:102F3000DA7040104FF4167148434FF41C6190FB57 +:102F4000F1FB584601F081FA8046644A644B01F077 +:102F500093FA0646634A644B01F08EFA044601F088 +:102F600043FA624908600846006801F083FB0446A2 +:102F700022460B465EA1604800F0E8F910235E4A45 +:102F800000213020FFF7EAFD52480068002804DAEB +:102F90005048006840424F4908604F480068002888 +:102FA00004DA4D48006840424B49086053480068C5 +:102FB0004FF41C6148434FF4167190FBF1F4214625 +:102FC00044480068FFF709FF4D4908604B48006816 +:102FD0004FF41C6148434FF4167190FBF1F4214605 +:102FE0003D480068FFF732FF46490860444800E06A +:102FF0006BE0006810F1030F03DB41480068032811 +:1030000006DD414800683E49096808443E490860B9 +:103010003C48006810F1030F03DB3A4800680328BE +:1030200006DD3A48006837490968084437490860AE +:103030003548006840F6AC51884203DD40F6B830B0 +:10304000314908603148006840F6AC51884203DDE0 +:1030500040F6B8302D49086040F2DC502A4908603B +:103060002A490860FFF77EFE1A4800684FF416717F +:1030700048434FF41C6190FBF1F0254908600C2097 +:10308000042300902048022102683820FFF722FD27 +:10309000114800684FF4167148434FF41C6190FBCF +:1030A000F1F01C4908600C2004230090174803210C +:1030B00002683820FFF70EFD0C20032300900F4814 +:1030C000062102683020FFF705FDBDE8F88F0000FB +:1030D00000100040580200205C020020A4703D0A4D +:1030E000D7A3B03F6F1283C0CA2109407C020020E1 +:1030F00025322E3266000000890200207002002076 +:10310000680200206C02002060020020640200209F +:10311000740200207802002010B586B00446012118 +:103120000420FDF719FD01214804FDF722FD0420CC +:10313000ADF8140018208DF8170003208DF8160044 +:1031400005A94648FDF74CFA0820ADF81400042004 +:103150008DF8170005A94148FDF742FA01940020B7 +:10316000ADF80800ADF80A00ADF80C00ADF810009D +:103170000C20ADF80E0001A93948FEF7A2FC4FF46F +:10318000E060FDF75FF926208DF8000000208DF843 +:1031900001008DF8020001208DF803006846FDF75C +:1031A00056F9012240F225512D48FEF722FD01215A +:1031B0002B48FEF712FD06B010BD70B504460D4653 +:1031C00040212748FEF7F1FD80212548FEF720FE2B +:1031D00013E021782248FEF76DFD00BF4021204812 +:1031E000FEF7D6FD0128F9D140211D48FEF7DDFD8F +:1031F00080211B48FEF70CFE641C281EA5F101056A +:10320000E7D170BD0022174B1A60174A1160174AA8 +:103210001060704710B540F225511148FEF7CEFD01 +:10322000D8B10F48FEF74AFDC4B20F4800680D49F7 +:10323000096888420CD90D48006804700B48006882 +:10324000401C0A49086007480068401C054908609E +:1032500040F225510248FEF7DBFD10BD0008014099 +:1032600000440040940200209802002090020020B8 +:10327000FEF7E8FD4FF41650FFF74EFFFFF7E7FAB1 +:1032800054E06420FEF77AFF06212948FFF7BAFFD1 +:103290002748C078B12806D125480079B52802D141 +:1032A00000202349C8702248C078B32806D120489E +:1032B0000079B72802D100201D49C8701C48C07889 +:1032C000B22805D11A480079B62801D1FFF79FFA34 +:1032D0001748C078B42808D115480079B82804D117 +:1032E000FFF7A5FA00201249C8701148C078B52828 +:1032F00005D10F480079B92801D1FFF7A8FA0C4889 +:10330000C078B62808D10A480079BA2804D1FFF756 +:1033100096FA00200649C8700548C078B82805D13B +:1033200003480079BC2801D1FFF779FAA9E700002A +:103330009C020020704700BFFEE700BFFEE700BF11 +:10334000FEE700BFFEE77047704770470FB41CB53B +:10335000074B06AA7B4469460090059800F0CDFA19 +:103360000020694600F0DCFA1CBC5DF814FB00008C +:10337000C905000070B5044685690068C10601D51D +:10338000302600E02026C00707D070BDD4E9012117 +:1033900030469047206A401C20626D1EF6D570BDF5 +:1033A00070B5044685690078C00707D170BDD4E9BF +:1033B000012120209047206A401C20626D1EF6D516 +:1033C00070BD2DE9F0474FF0000A89460446C0F869 +:1033D00020A02046E1688847002876D0252806D01E +:1033E000D4E901219047206A401C2062F1E7E1689E +:1033F000204600258847C4F81CA006460027C4F8CC +:1034000018A02A2E09D0304600F0D0FF38B304EBC4 +:103410008708303EC8F8186019E059F8041B2046A8 +:1034200004EB87029161E1688847012F064618D1B5 +:10343000E069002820DA25F020051DE0D8F8180002 +:1034400000EB800006EB40003038C8F8180020463A +:10345000E1688847064600F0A9FF0028EED1012F59 +:103460000AD02E2E08D12046E16888477F1C0646E8 +:10347000022F45F02005C4DBA069002803DA404292 +:1034800045F00105A061E80701D025F01005B6B1AF +:10349000A6F14100192802D8203645F400654A46B5 +:1034A0003146204625604D46FCF79CFE58B1012868 +:1034B00006D0ED1D25F0070000F1080989E704E0BA +:1034C00005F1040985E730468AE7206ABDE8F08700 +:1034D00070477047704770472DE9FF4F0C461E46F6 +:1034E0004FF0FF378BB0D2E90001DDF860800A9021 +:1034F0008A46C1F30A5505B93D46002108464FF0FA +:103500000000BAF1000F00F4400005DA00EB800083 +:103510004FF4400101EA50004FEA9059B9F1010F10 +:1035200000DDB9460A9850EA4A000ED044F6105021 +:10353000A5F2FF3545432F14B8F1000F1ED0754298 +:10354000291E1EDDC9F100021CE0B8F1010F4FF089 +:10355000000001D0302103E0F24305E02154401C7B +:10356000B042FBDB30460022002121540B99C1F808 +:103570000880C1E900200FB0BDE8F08FBD1B6D1CB5 +:10358000DEE74A4600DA694206A800F059FA06ABBF +:1035900093E8070003AB83E8070050460A9900F060 +:1035A00036FB8DE80700A0F500501F380090039807 +:1035B000002D09DD42F21F014A46084403A9039089 +:1035C000684600F095FD08E0A0F500504A461F3817 +:1035D00003A90390684600F09FFD8DE807000004F2 +:1035E000000C03D04FF0FF30410800E01046B8F166 +:1035F000000F03D00022009215461EE0751E05D470 +:1036000000F098F9303262556D1EF9D5B3460122AB +:10361000084302D000227F1C04E02078302801D12A +:1036200000227F1E002A099786D01DE0112D07DA9F +:1036300000F080F9303262556D1C50EA0102F5D17C +:10364000084302D00098C8B10EE00021681E05E0D2 +:10365000235C625C63542254401E491C8142F7DBA8 +:10366000AB46A81B401E0990002004F80B000B98E5 +:10367000099AC0F80880C0E9002B7CE711264FF0BA +:10368000000859E72DE9F04F88460446D21D22F084 +:10369000070191B0D1E90001CDE90A0100F072FE05 +:1036A00002460B98C00F01D02D2007E0206881074B +:1036B00001D52B2002E0202101EAC000032A099055 +:1036C00001D0072A05DB03464146204600F078F981 +:1036D0000BE12078800601D5E06900E00620B8F112 +:1036E000650F814606D0B8F1660F18D0B8F1670FA4 +:1036F00070D131E00020B9F1110F009001DB1123EE +:1037000001E009F101030AAA01A90CA8FFF7E4FEF0 +:10371000DDE90C70002609F10105834647E0012030 +:103720004B4600904FF000470AAA01A90CA8FFF7EA +:10373000D3FEDDE90DB00C995D46002610B909F104 +:1037400001000D18B9EB050003D4C0F1FF3609F1F3 +:103750000105A5EB09002BE0B9F1010F01DA4FF0EB +:1037600001090020B9F1110F0090484601DD112335 +:1037700000E003460AAA01A90CA8FFF7ADFEDDE9A7 +:103780000C704D4600268346207800070AD4AB45CE +:1037900000DA5D4601A8012D04DD411911F8011C74 +:1037A000302907D04F4502DA17F1040F04DA01205F +:1037B00082460FE06D1EEEE7002F02DCED1B3E445B +:1037C00003E0781CA84200DD7D1CB81B00F1010A53 +:1037D0004FF000472078000703D4AA4501DB4FF0E3 +:1037E000FF3A0021B7F1004F0DF143088DF8431067 +:1037F00024D002202B23002F01DA7F422D230A211F +:10380000021EA0F1010000DC5FB197FBF1FC97FB09 +:10381000F1F201FB1C7C17460CF1300C08F801CDCD +:10382000EEE7A8F1010003702188090501D54521C3 +:1038300000E06521A0F1010800F8011C09980FA91A +:10384000A1EB0807FF1D00B10120411901EBEA704F +:10385000A1693844081A401EA0612078C00602D42D +:103860002046FFF787FD099828B1D4E90121904748 +:10387000206A401C20622078C00622D52046FFF72F +:1038800079FD1EE0002E04DBB34502DD01A8805D5A +:1038900000E03020D4E901219047206A401C2062DA +:1038A000761CAAF101005FEA000A0AD100F03EF896 +:1038B000C0680168405CD4E901219047206A401C3F +:1038C0002062281EA5F10105DCDC07E0D4E9012116 +:1038D00018F8010B9047206A401C2062381EA7F19F +:1038E0000107F3DC2046FFF75BFD032011B043E640 +:1038F00001694A1C02610878704700B58FB0CDE9B4 +:1039000001310021059105497944CDE903101146A3 +:103910006846FFF756FD0FB000BD0000E5FFFFFF52 +:103920000A6802F8010B0A607047000000487047FF +:10393000FC02002030B5B0F10A024FEA900E71F19E +:1039400000034EEA817EB0EB0E0061EB91014FEA7D +:10395000101E4EEA017E10EB0E0041EB11114FEAF2 +:10396000102E4EEA016E10EB0E0041EB11214FEAD2 +:10397000104E4EEA014E10EB0E0041EB1141401883 +:1039800041F100014FEAD00040EA41704FEAD10115 +:1039900010EB80054FEA810444EA907444EB010483 +:1039A0006D1944EB0404521BA3414FF0000348BFC0 +:1039B0000A3200D530BD401C41F1000130BD00008D +:1039C0002DE9F0411F46044603260168072A01F449 +:1039D000006004DB08B116A505E016A503E008B1F8 +:1039E00015A500E015A521F010002060A069C01EFB +:1039F000A0610FB1401EA0612046FFF7BBFC4FB194 +:103A0000D4E9012138469047206A401C2062C01C3E +:103A1000206206E0206AFAE7D4E9012115F8010BDB +:103A20009047761EF8D22046FFF7BAFCBDE8F08139 +:103A30004E414E006E616E00494E4600696E660052 +:103A40002DE9F047814616468AB0334878440DC8C0 +:103A50008DE80D0030487844801C03AC0DC884E824 +:103A60000D0041F69B300844372190FBF1F290FBAA +:103A7000F1F5A5F1800501FB12041B3C02D564425F +:103A8000012000E00020DFF890A080460027FA44E3 +:103A9000AAF1BE0A0DE0E00709D03246684607EBFE +:103AA00047010AEB810100F037FB8DE80700641045 +:103AB0007F1C002CEFD1184F7F44AC3F18E0E80783 +:103AC00014D007EB04100DF1180A90E80E008AE8F4 +:103AD0000E00C068F04201D198190890324606A93C +:103AE00003A800F019FB03AB83E807006D10641C0A +:103AF000002DE4D132466946B8F1000F03A802D088 +:103B000000F0F6FA01E000F007FBC9E90001C9F88E +:103B100008200AB0BDE8F087C418000000487047CC +:103B2000DC0200207546FFF7F9FFAE460500694646 +:103B3000534620F00700854618B020B5FCF780FBFF +:103B4000BDE820404FF000064FF000074FF000089E +:103B50004FF0000B21F00701AC46ACE8C009ACE81F +:103B6000C009ACE8C009ACE8C0098D46704710B583 +:103B70000446AFF300802046BDE81040FCF74CBB84 +:103B80004FF0013C50F8042B51F8043B9A4221D1EC +:103B9000A2EB0C03934313EACC1317D150F8042B78 +:103BA00051F8043B9A4215D1A2EB0C03934313EA5C +:103BB000CC130BD150F8042B51F8043B9A4209D195 +:103BC000A2EB0C03934313EACC13DBD04FF00000BD +:103BD000704700BFD01A01BAB1FA81F101F01801A3 +:103BE00022FA01F0CB40C1F12001DBB2C0B2C01A11 +:103BF0002CFA01F3D11A914311EAC311E6D17047AF +:103C000001491820ABBEFEE72600020070475FEABC +:103C1000400C08BF91F0000F4FEA8C234FEAC122FD +:103C200043EA51514FEA1C5018BF00F5F0404FEAEB +:103C3000300018BF41F000415FEA6C5C00F0298061 +:103C4000BCF1FF3F08BF40F080407047130C06BF37 +:103C500012044FF0100C4FF0000C130E04BF1202B0 +:103C60000CF1080C130F04BF12010CF1040C930F9C +:103C700004BF92000CF1020CD30F04BF52000CF1F0 +:103C8000010C11464FF00002A0F11F00A0EB0C0048 +:103C9000704711F0004F08BF704731F000413FF40A +:103CA000D5AF0B0C06BF09044FF0100C4FF0000C01 +:103CB0000B0E04BF09020CF1080C0B0F04BF090125 +:103CC0000CF1040C8B0F04BF89000CF1020CCB0F1C +:103CD00004BF49000CF1010CCCF12003A0EB0C0057 +:103CE00022FA03F302FA0CF241EA030100F10100A7 +:103CF000704720F07F4C80EA030023F07F47ACEB55 +:103D0000070303F57C5300F0004003F1FF032DE9A6 +:103D100080494FEA154B09B44FEA144325EA0B4E8C +:103D200024EA03480FF2042606EB132749083E78DD +:103D30005FEA320203FB0667C7F5000707FB06F6DA +:103D40004FEA54374FEAD64606F1020607FB066CE7 +:103D5000CCF1005C4FEA1C472CEA074C07FB06F449 +:103D60000CFB06F504EB15464FEA961634BF00200F +:103D70004FF000404FEAD13706FB07FC4FEA1C4CDE +:103D80000CFB0BF7D21B03FB0CF761EB07010CFBE1 +:103D90000EF7B0EB074072EB17420CFB08F734BF8D +:103DA000A2EB0742B2EB074261EB17414FEA0C442A +:103DB0004FEA910706FB07FC4FEA1C4C0CFB0BF784 +:103DC000B0EBC74072EB573203FB0CF734BFA2EBEA +:103DD000C742B2EBC74261EB57310CFB0EF7B0EBB9 +:103DE000C70072EB57720CFB08F734BFA2EBC70297 +:103DF000B2EBC70261EB5771039F4FEA816141EA61 +:103E0000921104EBCC044FEAD1374FEA826206FBF1 +:103E100007FC42EA90124FEA80604FEA1C4C0CFB10 +:103E20000BF7D21B03FB0CF761EB07010CFB0EF742 +:103E3000B0EB074072EB17420CFB08F734BFA2EB64 +:103E40000742B2EB074261EB17414FEA8C554FEA4C +:103E5000910704EB9C2406FB07FC4FEA1C4C0CFB6F +:103E60000BF7B0EBC74072EB573203FB0CF734BFD4 +:103E7000A2EBC742B2EBC74261EB57310CFB0EF726 +:103E8000B0EBC70072EB57720CFB08F734BFA2EB24 +:103E9000C702B2EBC70261EB577115EB4C254FEA35 +:103EA000816141EA92114FEA82624FEAD13742EAD8 +:103EB000901206FB07FC44F100044FEA80604FEAD1 +:103EC0001C4C0CFB0BF7D21B03FB0CF761EB07013F +:103ED0000CFB0EF7B0EB074072EB17420CFB08F738 +:103EE00034BFA2EB0742B2EB074261EB174115EB7F +:103EF0001C154FEA813141EA92414FEA823242EA8F +:103F000090424FEA80304FEA0C7644F1000448EAD0 +:103F100003434EEA0B484FF0000EB2EB080C71EB76 +:103F2000030724BF624639464EEB0E0E4FF0000BDE +:103F30000018524149414BEB0B0BB2EB080C71EBF3 +:103F400003077BF1000B24BF624639464EEB0E0E91 +:103F50004FF0000B0018524149414BEB0B0BB2EBF9 +:103F6000080C71EB03077BF1000B24BF6246394656 +:103F70004EEB0E0E51EA020718BF46F0010616EB93 +:103F80000E7655F1000254F1000103D5BDE8890118 +:103F9000BDE80088BDE88901BDE80048B619524176 +:103FA00041EB0101A3F10103704780807F7E7D7C9E +:103FB0007B7A7978777676757473727171706F6EBB +:103FC0006E6D6C6C6B6A6A69686867666665646466 +:103FD000636362616160605F5F5E5E5D5D5C5C5BF0 +:103FE0005B5A5A595958585757565655555554545F +:103FF000535352525251515050504F4F4F4E4E4DBD +:104000004D4D4C4C4C4B4B4B4A4A4A494949484808 +:104010004847474747464646454545444444444348 +:1040200043434342424242414141002B26D4770060 +:1040300021D01CB54FEA370703B44FF010004FF002 +:1040400010014FF000000FBCBDE810400BF1010B58 +:10405000BBF1010F08BF5FEA170722BF12F101028F +:1040600011F101014FF0004143F1000300F0004065 +:1040700043EA00007047F9D35708DAE746EA0646F4 +:1040800013F1400F4FEA16461FDD13F1200FDFBF7B +:1040900016430A46002120335B42C8D0C3F12007F3 +:1040A00046EA064602FA07F74FEA164646EA0706C8 +:1040B000C3F1200722FA03F201FA07F721FA03F10C +:1040C0004FF0000342EA0702B1E746EA020646EA79 +:1040D00006464FEA164646EA0106BCBF46EA0646D1 +:1040E000360C4FF000034FF000024FF000019EE746 +:1040F0002DE9C048934630B491E8380007C831EA4A +:10410000400C48BF34EA430C03D5FFF7F2FDFFF73C +:104110008CFFF0BCBDE800882DE9C048934630B460 +:1041200091E8380007C810F0804F08BF13F0804FA7 +:1041300003D100F005F8FFF778FFF0BCBDE8008878 +:1041400020F07F4780EA030023F07F4C07EB0C034D +:10415000A3F57C5300F00040A3F1FE0392F0000FA2 +:1041600000F0B38095F0000F00F077802DE9014951 +:104170004FEA11404FEA144621EA004800FB06FCD2 +:1041800024EA064708FB06F607FB08F800FB07F7DA +:1041900018EB06484CEB164C4FEA124B18EB07484D +:1041A0004FEA15464CEB174022EA0B4E0BFB06FC80 +:1041B00025EA06470EFB06F607FB0EFE0BFB07F78C +:1041C0001EEB064E4CEB164C4FF000061EEB074E56 +:1041D0004CEB174B18EB0B0840F1000018EB0E0BE3 +:1041E00058EB000840F100008F1A4FF000013CBF6F +:1041F000C943661B14BFB5EB040C00213CBFC94387 +:10420000F61B4FEA17444EEA8E0E27EA04454FEAA2 +:104210001C4704FB07622CEA074C05FB07F70CFB65 +:1042200005F604FB0CFC16EB074642EB174216EBB7 +:104230000C4642EB1C421BEB060658EB02024141C6 +:1042400046EA9E0601D5BDE80189B619524141EB07 +:104250000101A3F10103BDE801894FEA14454FEACA +:10426000114724EA054621EA074C05FB07F406FB43 +:1042700007F70CFB06F105FB0CFC11EB074144EBC7 +:1042800017444FEA124711EB0C4144EB1C4422EA5D +:10429000074C05FB07F206FB07F70CFB06F605FBD0 +:1042A0000CFC16EB074642EB174216EB0C4642EBB2 +:1042B0001C456A1854F1000148BF7047B6195241B5 +:1042C00041EB0101A3F10103704795F0000F37D0D6 +:1042D0004FEA11424FEA144721EA024624EA074C0A +:1042E00002FB07F106FB07F70CFB06F402FB0CFCD4 +:1042F00014EB074441EB17414FEA154714EB0C440C +:1043000041EB1C4125EA074C02FB07F506FB07F7CA +:104310000CFB06F602FB0CFC16EB074645EB1745BB +:1043200016EB0C4645EB1C42121951F1000148BF37 +:104330007047B619524141EB0101A3F101037047E7 +:104340004FEA14454FEA114724EA054621EA074C93 +:1043500005FB07F106FB07F70CFB06F24FF0000622 +:1043600005FB0CFC12EB074241EB174112EB0C4230 +:1043700051EB1C4148BF7047921841EB0101A3F17A +:1043800001037047490050EAC12018BF04204A0DBC +:1043900018BF40F0010040F2FF72B2EB515F08BF5E +:1043A00040F00200012808BF0520704730380A2875 +:1043B00001D20120704700207047000010B500298D +:1043C0000AD00878002807D005487844FFF7D8FBC2 +:1043D000002801D0002010BD0248784410BD000024 +:1043E000820F00007A0F000021F00042A2F160521B +:1043F000B2F5801F01F0004328BFD2F17F6C0BD9CA +:104400005FEA001C43EAC20242EB507018BF7047DB +:1044100028BF20F001007047B2F5801FBCBF1846CE +:1044200070474FEA410C1CF5001F02D2084600F00D +:10443000AABA70B500F0CAF800000089FFF7F6BF0D +:104440004FF00040A0F58000704710F0004248BFD8 +:104450004042B0FA80F310FA03F10AD0C3F11D0311 +:1044600003F580634FEA415002EB035202EBD12186 +:1044700070474FF000007047DFF848C170B51CEA84 +:10448000111E1EBF1CEA13159EEA0C0F95EA0C0FB5 +:1044900000F06F8081EA030423EA4C134EEAD47ED5 +:1044A00021EA4C1141F4801143F48013AE44A1FB86 +:1044B000024CA0FB0365AEF17F7E361955EB0C056F +:1044C000A1FB034C4CF10003A0FB021C16EB0C06F5 +:1044D000654153F10003094218BF46F0010613F489 +:1044E000007F0BD14FEA03314FEA0530340341EA34 +:1044F000155140EA16506FF003020AE04FEAC3215B +:104500004FEAC520F40241EA555140EA56506FF097 +:10451000020202EB2E4201EB025585EACE710AD06F +:104520005FEA440C18BF24F0004450F1000041F150 +:10453000000120EAD47040F2FE7C624500D270BDDA +:10454000A84214BF4FF080444FF04044002E08BFF3 +:104550000024BEF1806FA8BFA1F1C041BDE870404A +:1045600080F282804FF0000001F1C04101F0004173 +:1045700070479EEA0C0F0CEA131518BF95EA0C0F52 +:1045800006D04FF0000081EA030E0EF0004170BD2E +:1045900000F01CF88900013E00F007B800F009B8EF +:1045A0004FEA430C5FEA5C5C08D081EA030100F04B +:1045B0005BB84FEA410C5FEA5C5CF6D14FF000005B +:1045C000014970470000FF070000F87F0EF1020E5E +:1045D0002EF0030E5EF8046B364205D4012A43EB3D +:1045E000030515F5001F12D8012841EB010C1CF53D +:1045F000001F0CD80ED14FEAD17C15F5001F0CEB33 +:104600004C0C0CF1020C08BF4CEBD37C04E04FF0D7 +:10461000080C01E04FEAD37C0CEB4C0526FA05F6BA +:1046200006F00706B6F1040C06D20EEB860CBDE8C8 +:1046300070404CF0010C6047DFE80CF0090B0202FF +:104640004FF000414FF00000A1F5002170BD194668 +:104650001046012851EB010418BFD4F5001484BFA3 +:10466000002001F0004170BD0808A0F500114FEADC +:104670003101704743004FEAD30C4FEA3C0C4340F2 +:104680001FBF40070CF1605113F0FE4F70471CF044 +:10469000006F03D100200CF0004170470CF0004384 +:1046A00043EA507010B540EACC0000F026F900BF94 +:1046B000000000924FEA0001FFF7D6BF4FF0004123 +:1046C0004FF00000A1F500217047000090EA010FB3 +:1046D00048BF81F0004100F16281421A3CBF801A5C +:1046E00089184FEAD0524FF07F4C1CEA410FA2EBE1 +:1046F000D15318BF9CEA026F00F03B804FF0004C92 +:104700004CEA00204CEA012121FA03FC10EB0C0CCE +:104710001ED202F1FF325FEA1C2040EBC25038BFCC +:1047200070471CF07F0F4FEA400C18BFBCF17F4F61 +:1047300038BF7047C3F12003994008BF20F0010043 +:10474000BCF17F4F38BF7047A0F1C04000F01BB9EB +:104750004FEA3C00000A40EBC25028BF1CF0FF0F9C +:104760004FEA400CE6D018BFBCF17F4F38BF70470E +:10477000EAE79CEA026F05D010EA5C0F08BF00F080 +:104780000040704710B500F0B8F800BF64FBBE3EB3 +:1047900041000B0ED3F19E0208D950F400034FEAFA +:1047A000032323FA02F048BF4042704710B500F0DF +:1047B000A4F800BF49922480002070476FF00042A7 +:1047C00082EA20007047000010F0004148BF4042DC +:1047D000B0FA80F310FA03F2C3F19D030BD051EA53 +:1047E000C35101EB1220530638BF704700F101009E +:1047F00008BF20F0010070474FF47F0C1CEAD01274 +:104800001EBF1CEAD11392EA0C0F93EA0C0F00F0C2 +:10481000478090EA010F48BF42F480724FF0004C8D +:104820004CEA00204CEA012102EB0302A0FB011339 +:10483000A2F50002002918BF43F001035B0028BF66 +:104840004FEA330342EB22425FEA132C4CEBC25097 +:104850002EBFBCEB436FB2F57C0F70474FEA036C81 +:10486000BCF1004F08BF20F00100B2F57C0F38BF4B +:1048700070470BD582F0FF0212F5803FC8BF70472A +:1048800000F1C040D8BF00F00040704700F5000CB8 +:104890005FEA4C0C48BF7047B0F1C04000F073B8FD +:1048A00090EA010F0CEAD11348BF42F480726245CE +:1048B00038BF634504D280EA010000F00040704731 +:1048C00010B500F01AF800BF8900013E00F007B8EB +:1048D00000F009B85FEA410C5FEA1C6C08D080EA7E +:1048E000010000F050B85FEA400C5FEA1C6CF6D1A2 +:1048F0004FF00040A0F5800070470EF1020E2EF040 +:10490000030E5EF8044B244204D44FEA4102B2F194 +:104910007F4F11D84FEA4003B3F17F4F0CD80ED12F +:104920004FEAD07CB2F17F4F0CEB4C0C0CF1020C37 +:1049300008BF4CEBD17C04E04FF0080C01E04FEADB +:10494000D17C0CEB4C0324FA03F404F00704B4F11B +:10495000040C06D20EEB840CBDE810404CF0010CA8 +:104960006047DFE80CF0070802024FF00040A0F5B6 +:10497000800010BD0846420018BFD2F1807288BF87 +:1049800000F0004010BDFF2141EAD050C005704743 +:1049900090EA010F48BF81F000413FF59EAE421AF8 +:1049A00004D882F00042A0EB020011444FEAD0523A +:1049B0004FF07F4C1CEA410FA2EBD15318BF9CEA89 +:1049C000026F4AD04FF0004C4CEA00204CEA012123 +:1049D00021FA03FCB0EB0C0C0FD412F0FE0F36D012 +:1049E0005FEA4C001DD5001240EBC25038BF704743 +:1049F0001CF03F0F18BF70470BE0A2F101025FEA05 +:104A00001C2040EBC25038BF70471CF07F0F18BF0E +:104A10007047C3F12003994014BF401E20F00100ED +:104A2000704780084FEA122308BF7047B0FA80FC35 +:104A3000A2EB0C02CCF1280C60FA0CF093EA122FD6 +:104A400004BF00EBC25070474FEAC3707047130AAF +:104A50005FEADC1008BF7047F6E79CEA026F04D0FB +:104A600010EA5C0F08BF0020704710B5FFF745FF44 +:104A700040DFF63E81F000407047FEF703BE0000C5 +:104A8000000000000000002F0000000007000700E9 +:104A900000147F147F1400242A7F2A120062640805 +:104AA0001323003649552250000005030000000082 +:104AB0001C224100000041221C000014083E081482 +:104AC0000008083E0808000000A060000008080870 +:104AD0000808000060600000002010080402003E8A +:104AE0005149453E0000427F400000426151494625 +:104AF000002141454B31001814127F100027454515 +:104B00004539003C4A494930000171090503003626 +:104B10004949493600064949291E00003636000039 +:104B2000000056360000000814224100001414143E +:104B30001414000041221408000201510906003239 +:104B40004959513E007C1211127C007F4949493677 +:104B5000003E41414122007F4141221C007F4949E2 +:104B60004941007F09090901003E4149497A007F16 +:104B70000808087F0000417F4100002040413F01BC +:104B8000007F08142241007F40404040007F020C1B +:104B9000027F007F0408107F003E4141413E007FBC +:104BA00009090906003E4151215E007F0919294685 +:104BB0000046494949310001017F0101003F404061 +:104BC000403F001F2040201F003F4038403F00630F +:104BD0001408146300070870080700615149454331 +:104BE00000007F41410000552A552A5500004141EF +:104BF0007F000004020102040040404040400000E9 +:104C000001020400002054545478007F4844443882 +:104C100000384444442000384444487F0038545409 +:104C2000541800087E0901020018A4A4A47C007F87 +:104C3000080404780000447D4000004080847D002A +:104C4000007F102844000000417F4000007C0418D1 +:104C50000478007C0804047800384444443800FC9C +:104C6000242424180018242418FC007C08040408B8 +:104C700000485454542000043F444020003C40402D +:104C8000207C001C2040201C003C4030403C004464 +:104C900028102844001CA0A0A07C004464544C446C +:104CA000141414141414000000000000000000008C +:104CB000000000000000000000F8000000000000FC +:104CC00000333000000000100C06100C060000003D +:104CD00000000000000040C07840C0784000043F61 +:104CE00004043F040400007088FC08300000001831 +:104CF00020FF211E0000F008F000E0180000002155 +:104D00001C031E211E0000F00888700000001E21F8 +:104D100023241927211010160E00000000000000A7 +:104D2000000000000000000000E018040200000085 +:104D300000071820400000020418E00000000040B6 +:104D4000201807000000404080F080404000020230 +:104D5000010F01020200000000F00000000001014C +:104D6000011F01010100000000000000000080B0F0 +:104D700070000000000000000000000000000001C2 +:104D800001010101010100000000000000000030ED +:104D90003000000000000000000080601804006087 +:104DA00018060100000000E010080810E000000FE5 +:104DB000102020100F00001010F80000000000204C +:104DC000203F202000000070080808887000003094 +:104DD000282422213000003008888848300000183C +:104DE000202020110E000000C02010F80000000755 +:104DF0000424243F240000F80888880808000019CB +:104E0000212020110E0000E0108888180000000FFB +:104E1000112020110E0000380808C83808000000D2 +:104E2000003F000000000070880808887000001C27 +:104E3000222121221C0000E010080810E0000000E0 +:104E4000312222110F00000000C0C000000000004D +:104E50000030300000000000008000000000000072 +:104E60008060000000000000804020100800000169 +:104E7000020408102000404040404040400004042C +:104E800004040404040000081020408000000020F6 +:104E9000100804020100007048080808F000000033 +:104EA000003036010000C030C828E810E0000718C4 +:104EB000272423140B000000C038E0000000203C31 +:104EC00023020227382008F8888888700000203FD5 +:104ED000202020110E00C0300808080838000718EC +:104EE00020202010080008F808080810E000203FE3 +:104EF000202020100F0008F88888E8081000203FC4 +:104F000020202320180008F88888E8081000203F97 +:104F1000200003000000C03008080838000007180F +:104F20002020221E020008F808000008F808203F90 +:104F3000210101213F20000808F808080000002096 +:104F4000203F2020000000000808F8080800C0806A +:104F500080807F00000008F888C028180800203FE3 +:104F600020012638200008F8080000000000203F3B +:104F700020202020300008F8F800F8F80800203F32 +:104F8000003F003F200008F830C00008F808203F2C +:104F9000200007183F00E01008080810E0000F107C +:104FA000202020100F0008F808080808F000203F13 +:104FB000210101010000E01008080810E0000F18AE +:104FC000242438504F0008F8888888887000203FD3 +:104FD0002000030C302000708808080838000038D2 +:104FE000202121221C00180808F8080818000000D9 +:104FF000203F2000000008F808000008F808001F03 +:10500000202020201F000878880000C838080000F1 +:1050100007380E010000F80800F80008F800033C0B +:105020000700073C030008186880806818082030D3 +:105030002C03032C30200838C800C83808000000B2 +:10504000203F2000000010080808C8380800203859 +:10505000262120201800000000FE020202000000AD +:10506000007F40404000000C30C000000000000005 +:1050700000010638C00000020202FE0000000040ED +:1050800040407F0000000000040202020400000013 +:105090000000000000000000000000000000808010 +:1050A00080808080808000020204000000000000F8 +:1050B00000000000000000008080808000000019D7 +:1050C000242222223F2008F8008080000000003FB8 +:1050D000112020110E000000008080800000000ED2 +:1050E000112020201100000000808088F800000EB0 +:1050F000112020103F200000808080800000001FD1 +:10510000222222221300008080F088888818002044 +:10511000203F202000000000808080808000006B05 +:1051200094949493600008F8008080800000203FF1 +:10513000210000203F2000809898000000000020FF +:10514000203F20200000000000809898000000C050 +:105150008080807F000008F8000080808000203F71 +:1051600024022D302000000808F800000000002074 +:10517000203F202000008080808080808000203FB1 +:1051800020003F20003F8080008080800000203F82 +:10519000210000203F200000808080800000001F50 +:1051A000202020201F00808000808000000080FFE1 +:1051B000A12020110E000000008080808000000EE1 +:1051C000112020A0FF80808080008080800020202F +:1051D0003F2120000100000080808080800000339B +:1051E000242424241900008080E080800000000036 +:1051F000001F202000008080000000808000001F31 +:10520000202020103F2080808000008080800001CE +:105210000E300806010080800080008080800F3002 +:105220000C030C300F000080800080808000002084 +:10523000312E0E31200080808000008080808081AF +:105240008E70180601000080808080808000002120 +:10525000302C2221300000000000807C020200007F +:105260000000003F404000000000FF000000000080 +:105270000000FF0000000002027C800000000040EF +:10528000403F00000000000601010202040400008B +:10529000000000000000000002400000000000A02C +:1052A0000000000005400000000000C800000000F1 +:1052B0000C4000000000409C00000000194000006D +:1052C0000020BCBE0000000034400000BFC91B8E9F +:1052D00000000004B5400000504BCFD06607E2CF7D +:1052E000010000006C4100003E8251AADFEEA734AD +:1052F00001000000D9420000DCB5A0E23A301F975F +:10530000FFFFFFFFB4450000FD25A0C8E9A3C14F82 +:10531000FFFFFFFFFF3F00000000008000000000D3 +:10532000FF3F0000000000800000000068530008FC +:10533000000000209C0200006C0100086C54000872 +:105340009C020020A4060000C80100081C00000008 +:1053500043000000F8FFFFFF0C0000000E000000FB +:105360000F0000002E0000001184A24A0468090109 +:10537000020304060708090C691005140204060854 +:1053800015404042CC000B1440A09E8282829EA019 +:105390002020000D113F908840432C10284641806A +:1053A000801C100C44012B45C606041144140C3813 +:1053B000098040201E2040407F20031240403809D1 +:1053C00008884828180FE8080109111F2B0809014F +:1053D0003AFF0609112139C0080A1204F49494FF17 +:1053E0009494F404E1080D10201F20484442415FCA +:1053F000414244488029764C88780F7F0911601E0D +:105400002010484641012A7F050911C029350B1893 +:10541000C838402E08040201FF3C19010213FF089E +:105420000E12C8B88FE888C820900C030C9020603A +:10543000161808FF04041A3FC204144040702809DB +:10544000FC242424FC252624080211040010114009 +:10545000308F80844C55252525554C80808000094F +:0C5460002C9A99193FCDCCCC3D022B4674 +:0400000508000131BD +:00000001FF diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.htm b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.htm new file mode 100644 index 0000000..dc4dab2 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.htm @@ -0,0 +1,2084 @@ + + +Static Call Graph - [..\Output\Project.axf] +
+

Static Call Graph for image ..\Output\Project.axf

+

#<CALLGRAPH># ARM Linker, 5060300: Last Updated: Thu Jan 11 12:22:23 2024 +

+

Maximum Stack Usage = 320 bytes + Unknown(Functions without stacksize, Cycles, Untraceable Function Pointers)

+Call chain for Maximum Stack Depth:

+_printf_f ⇒ _printf_fp_dec ⇒ _printf_fp_dec_real ⇒ _fp_digits ⇒ _btod_etento ⇒ _btod_emul ⇒ _e2e +

+

+Functions with no stack information +

+ +

+

+Mutually Recursive functions +

  • SysTick_Handler   ⇒   SysTick_Handler
    +
  • ADC1_2_IRQHandler   ⇒   ADC1_2_IRQHandler
    + +

    +

    +Function Pointers +

      +
    • ADC1_2_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • ADC3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • BusFault_Handler from stm32f10x_it.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • CAN1_RX1_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • CAN1_SCE_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • DMA1_Channel1_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • DMA1_Channel2_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • DMA1_Channel3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • DMA1_Channel4_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • DMA1_Channel5_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • DMA1_Channel6_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • DMA1_Channel7_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • DMA2_Channel1_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • DMA2_Channel2_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • DMA2_Channel3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • DMA2_Channel4_5_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • DebugMon_Handler from stm32f10x_it.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • EXTI0_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • EXTI15_10_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • EXTI1_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • EXTI2_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • EXTI3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • EXTI4_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • EXTI9_5_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • FLASH_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • FSMC_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • HardFault_Handler from stm32f10x_it.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • I2C1_ER_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • I2C1_EV_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • I2C2_ER_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • I2C2_EV_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • MemManage_Handler from stm32f10x_it.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • NMI_Handler from stm32f10x_it.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • PVD_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • PendSV_Handler from stm32f10x_it.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • RCC_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • RTCAlarm_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • RTC_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • Reset_Handler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • SDIO_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • SPI1_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • SPI2_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • SPI3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • SVC_Handler from stm32f10x_it.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • SysTick_Handler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • SystemInit from system_stm32f10x.o(.text) referenced from startup_stm32f10x_hd.o(.text) +
    • TAMPER_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM1_BRK_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM1_CC_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM1_TRG_COM_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM1_UP_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM2_IRQHandler from bsp_timer.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM4_IRQHandler from bsp_timer.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM5_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM6_IRQHandler from car.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM7_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM8_BRK_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM8_CC_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM8_TRG_COM_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • TIM8_UP_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • UART4_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • UART5_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • USART1_IRQHandler from bsp_usart.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • USART2_IRQHandler from bluetooth.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • USART3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • USBWakeUp_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • USB_HP_CAN1_TX_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • USB_LP_CAN1_RX0_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • UsageFault_Handler from stm32f10x_it.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • WWDG_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET) +
    • __main from __main.o(!!!main) referenced from startup_stm32f10x_hd.o(.text) +
    • _printf_input_char from _printf_char_common.o(.text) referenced from _printf_char_common.o(.text) +
    • _sputc from _sputc.o(.text) referenced from noretval__2sprintf.o(.text) +
    +

    +

    +Global Symbols +

    +

    __main (Thumb, 8 bytes, Stack size 0 bytes, __main.o(!!!main)) +

    [Calls]

    • >>   __rt_entry +
    • >>   __scatterload +
    + +

    __scatterload (Thumb, 0 bytes, Stack size unknown bytes, __scatter.o(!!!scatter)) +

    [Called By]

    • >>   __main +
    + +

    __scatterload_rt2 (Thumb, 44 bytes, Stack size unknown bytes, __scatter.o(!!!scatter), UNUSED) +

    [Calls]

    • >>   __rt_entry +
    + +

    __scatterload_rt2_thumb_only (Thumb, 0 bytes, Stack size unknown bytes, __scatter.o(!!!scatter), UNUSED) + +

    __scatterload_null (Thumb, 0 bytes, Stack size unknown bytes, __scatter.o(!!!scatter), UNUSED) + +

    __decompress (Thumb, 90 bytes, Stack size unknown bytes, __dczerorl2.o(!!dczerorl2), UNUSED) + +

    __decompress1 (Thumb, 0 bytes, Stack size unknown bytes, __dczerorl2.o(!!dczerorl2), UNUSED) + +

    __scatterload_zeroinit (Thumb, 28 bytes, Stack size unknown bytes, __scatter_zi.o(!!handler_zi), UNUSED) + +

    _printf_f (Thumb, 0 bytes, Stack size unknown bytes, _printf_f.o(.ARM.Collect$$_printf_percent$$00000003)) +

    [Stack]

    • Max Depth = 320 + Unknown Stack Size +
    • Call Chain = _printf_f ⇒ _printf_fp_dec ⇒ _printf_fp_dec_real ⇒ _fp_digits ⇒ _btod_etento ⇒ _btod_emul ⇒ _e2e +
    +
    [Calls]
    • >>   _printf_fp_dec +
    + +

    _printf_percent (Thumb, 0 bytes, Stack size unknown bytes, _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000)) +

    [Called By]

    • >>   __printf +
    + +

    _printf_percent_end (Thumb, 0 bytes, Stack size unknown bytes, _printf_percent_end.o(.ARM.Collect$$_printf_percent$$00000017)) + +

    __rt_lib_init (Thumb, 0 bytes, Stack size unknown bytes, libinit.o(.ARM.Collect$$libinit$$00000000)) +

    [Called By]

    • >>   __rt_entry_li +
    + +

    __rt_lib_init_fp_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000002)) + +

    __rt_lib_init_heap_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000000A)) + +

    __rt_lib_init_lc_common (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000000F)) +

    [Calls]

    • >>   __rt_locale +
    + +

    __rt_lib_init_preinit_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000004)) + +

    __rt_lib_init_rand_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000000E)) + +

    __rt_lib_init_user_alloc_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000000C)) + +

    __rt_lib_init_lc_collate_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000011)) + +

    __rt_lib_init_lc_ctype_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000013)) + +

    __rt_lib_init_lc_monetary_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000015)) + +

    __rt_lib_init_lc_numeric_2 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000016)) +

    [Stack]

    • Max Depth = 8 + Unknown Stack Size +
    • Call Chain = __rt_lib_init_lc_numeric_2 ⇒ _get_lc_numeric +
    +
    [Calls]
    • >>   _get_lc_numeric +
    + +

    __rt_lib_init_alloca_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000002E)) + +

    __rt_lib_init_argv_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000002C)) + +

    __rt_lib_init_atexit_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000001B)) + +

    __rt_lib_init_clock_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000021)) + +

    __rt_lib_init_cpp_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000032)) + +

    __rt_lib_init_exceptions_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000030)) + +

    __rt_lib_init_fp_trap_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000001F)) + +

    __rt_lib_init_getenv_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000023)) + +

    __rt_lib_init_lc_numeric_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000017)) + +

    __rt_lib_init_lc_time_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000019)) + +

    __rt_lib_init_return (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000033)) + +

    __rt_lib_init_signal_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000001D)) + +

    __rt_lib_init_stdio_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000025)) + +

    __rt_lib_shutdown (Thumb, 0 bytes, Stack size unknown bytes, libshutdown.o(.ARM.Collect$$libshutdown$$00000000)) +

    [Called By]

    • >>   __rt_exit_ls +
    + +

    __rt_lib_shutdown_cpp_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$00000002)) + +

    __rt_lib_shutdown_fp_trap_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$00000007)) + +

    __rt_lib_shutdown_heap_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$0000000F)) + +

    __rt_lib_shutdown_return (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$00000010)) + +

    __rt_lib_shutdown_signal_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$0000000A)) + +

    __rt_lib_shutdown_stdio_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$00000004)) + +

    __rt_lib_shutdown_user_alloc_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$0000000C)) + +

    __rt_entry (Thumb, 0 bytes, Stack size unknown bytes, __rtentry.o(.ARM.Collect$$rtentry$$00000000)) +

    [Called By]

    • >>   __main +
    • >>   __scatterload_rt2 +
    + +

    __rt_entry_presh_1 (Thumb, 0 bytes, Stack size unknown bytes, __rtentry2.o(.ARM.Collect$$rtentry$$00000002)) + +

    __rt_entry_sh (Thumb, 0 bytes, Stack size unknown bytes, __rtentry4.o(.ARM.Collect$$rtentry$$00000004)) +

    [Stack]

    • Max Depth = 8 + Unknown Stack Size +
    • Call Chain = __rt_entry_sh ⇒ __user_setup_stackheap +
    +
    [Calls]
    • >>   __user_setup_stackheap +
    + +

    __rt_entry_li (Thumb, 0 bytes, Stack size unknown bytes, __rtentry2.o(.ARM.Collect$$rtentry$$0000000A)) +

    [Calls]

    • >>   __rt_lib_init +
    + +

    __rt_entry_postsh_1 (Thumb, 0 bytes, Stack size unknown bytes, __rtentry2.o(.ARM.Collect$$rtentry$$00000009)) + +

    __rt_entry_main (Thumb, 0 bytes, Stack size unknown bytes, __rtentry2.o(.ARM.Collect$$rtentry$$0000000D)) +

    [Stack]

    • Max Depth = 128 + Unknown Stack Size +
    • Call Chain = __rt_entry_main ⇒ main ⇒ System_Init ⇒ OLED_ShowString ⇒ OLED_ShowChar ⇒ OLED_Set_Pos ⇒ OLED_WR_Byte ⇒ Write_IIC_Data ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   exit +
    • >>   main +
    + +

    __rt_entry_postli_1 (Thumb, 0 bytes, Stack size unknown bytes, __rtentry2.o(.ARM.Collect$$rtentry$$0000000C)) + +

    __rt_exit (Thumb, 0 bytes, Stack size unknown bytes, rtexit.o(.ARM.Collect$$rtexit$$00000000)) +

    [Called By]

    • >>   exit +
    + +

    __rt_exit_ls (Thumb, 0 bytes, Stack size unknown bytes, rtexit2.o(.ARM.Collect$$rtexit$$00000003)) +

    [Calls]

    • >>   __rt_lib_shutdown +
    + +

    __rt_exit_prels_1 (Thumb, 0 bytes, Stack size unknown bytes, rtexit2.o(.ARM.Collect$$rtexit$$00000002)) + +

    __rt_exit_exit (Thumb, 0 bytes, Stack size unknown bytes, rtexit2.o(.ARM.Collect$$rtexit$$00000004)) +

    [Calls]

    • >>   _sys_exit +
    + +

    Reset_Handler (Thumb, 8 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    SysTick_Handler (Thumb, 2 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +

    [Calls]

    • >>   SysTick_Handler +
    +
    [Called By]
    • >>   SysTick_Handler +
    +
    [Address Reference Count : 1]
    • startup_stm32f10x_hd.o(RESET) +
    +

    ADC1_2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +

    [Calls]

    • >>   ADC1_2_IRQHandler +
    +
    [Called By]
    • >>   ADC1_2_IRQHandler +
    +
    [Address Reference Count : 1]
    • startup_stm32f10x_hd.o(RESET) +
    +

    ADC3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    CAN1_RX1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    CAN1_SCE_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    DMA1_Channel1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    DMA1_Channel2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    DMA1_Channel3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    DMA1_Channel4_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    DMA1_Channel5_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    DMA1_Channel6_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    DMA1_Channel7_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    DMA2_Channel1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    DMA2_Channel2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    DMA2_Channel3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    DMA2_Channel4_5_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    EXTI0_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    EXTI15_10_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    EXTI1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    EXTI2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    EXTI3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    EXTI4_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    EXTI9_5_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    FLASH_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    FSMC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    I2C1_ER_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    I2C1_EV_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    I2C2_ER_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    I2C2_EV_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    PVD_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    RCC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    RTCAlarm_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    RTC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    SDIO_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    SPI1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    SPI2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    SPI3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TAMPER_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TIM1_BRK_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TIM1_CC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TIM1_TRG_COM_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TIM1_UP_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TIM3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TIM5_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TIM7_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TIM8_BRK_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TIM8_CC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TIM8_TRG_COM_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TIM8_UP_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    UART4_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    UART5_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    USART3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    USBWakeUp_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    USB_HP_CAN1_TX_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    USB_LP_CAN1_RX0_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    WWDG_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    __user_initial_stackheap (Thumb, 0 bytes, Stack size unknown bytes, startup_stm32f10x_hd.o(.text)) +

    [Called By]

    • >>   __user_setup_stackheap +
    + +

    SystemInit (Thumb, 78 bytes, Stack size 8 bytes, system_stm32f10x.o(.text)) +

    [Stack]

    • Max Depth = 28
    • Call Chain = SystemInit ⇒ SetSysClock ⇒ SetSysClockTo72 +
    +
    [Calls]
    • >>   SetSysClock +
    +
    [Address Reference Count : 1]
    • startup_stm32f10x_hd.o(.text) +
    +

    SystemCoreClockUpdate (Thumb, 142 bytes, Stack size 8 bytes, system_stm32f10x.o(.text), UNUSED) + +

    NVIC_PriorityGroupConfig (Thumb, 10 bytes, Stack size 0 bytes, misc.o(.text)) +

    [Called By]

    • >>   Bluetooth_Init +
    • >>   Timer6_Init +
    + +

    NVIC_Init (Thumb, 100 bytes, Stack size 16 bytes, misc.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = NVIC_Init +
    +
    [Called By]
    • >>   Bluetooth_Init +
    • >>   Timer6_Init +
    + +

    NVIC_SetVectorTable (Thumb, 14 bytes, Stack size 0 bytes, misc.o(.text), UNUSED) + +

    NVIC_SystemLPConfig (Thumb, 34 bytes, Stack size 0 bytes, misc.o(.text), UNUSED) + +

    SysTick_CLKSourceConfig (Thumb, 40 bytes, Stack size 0 bytes, misc.o(.text)) +

    [Called By]

    • >>   Delay_Init +
    + +

    GPIO_DeInit (Thumb, 172 bytes, Stack size 8 bytes, stm32f10x_gpio.o(.text), UNUSED) +

    [Calls]

    • >>   RCC_APB2PeriphResetCmd +
    + +

    GPIO_AFIODeInit (Thumb, 20 bytes, Stack size 8 bytes, stm32f10x_gpio.o(.text), UNUSED) +

    [Calls]

    • >>   RCC_APB2PeriphResetCmd +
    + +

    GPIO_Init (Thumb, 278 bytes, Stack size 24 bytes, stm32f10x_gpio.o(.text)) +

    [Stack]

    • Max Depth = 24
    • Call Chain = GPIO_Init +
    +
    [Called By]
    • >>   Bluetooth_Init +
    • >>   USART1_Init +
    • >>   MOTO_PWM_Init +
    • >>   MOTO_GPIO_Init +
    • >>   LED_GPIO_Config +
    • >>   IIC_Init +
    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    + +

    GPIO_StructInit (Thumb, 16 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text), UNUSED) + +

    GPIO_ReadInputDataBit (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text)) +

    [Called By]

    • >>   IIC_Wait_Ack +
    • >>   IIC_Read_Byte +
    • >>   LED_Flash +
    + +

    GPIO_ReadInputData (Thumb, 8 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text), UNUSED) + +

    GPIO_ReadOutputDataBit (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text), UNUSED) + +

    GPIO_ReadOutputData (Thumb, 8 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text), UNUSED) + +

    GPIO_SetBits (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text)) +

    [Called By]

    • >>   MOTO_Right +
    • >>   MOTO_Left +
    • >>   IIC_Wait_Ack +
    • >>   IIC_Read_Byte +
    • >>   IIC_NAck +
    • >>   IIC_Ack +
    • >>   IIC_Send_Byte +
    • >>   IIC_Stop +
    • >>   IIC_Start +
    + +

    GPIO_ResetBits (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text)) +

    [Called By]

    • >>   MOTO_Right +
    • >>   MOTO_Left +
    • >>   IIC_Wait_Ack +
    • >>   IIC_Read_Byte +
    • >>   IIC_NAck +
    • >>   IIC_Ack +
    • >>   IIC_Send_Byte +
    • >>   IIC_Stop +
    • >>   IIC_Start +
    + +

    GPIO_WriteBit (Thumb, 10 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text)) +

    [Called By]

    • >>   LED_Flash +
    + +

    GPIO_Write (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text), UNUSED) + +

    GPIO_PinLockConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text), UNUSED) + +

    GPIO_EventOutputConfig (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text), UNUSED) + +

    GPIO_EventOutputCmd (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text), UNUSED) + +

    GPIO_PinRemapConfig (Thumb, 138 bytes, Stack size 20 bytes, stm32f10x_gpio.o(.text), UNUSED) + +

    GPIO_EXTILineConfig (Thumb, 66 bytes, Stack size 12 bytes, stm32f10x_gpio.o(.text), UNUSED) + +

    GPIO_ETH_MediaInterfaceConfig (Thumb, 8 bytes, Stack size 0 bytes, stm32f10x_gpio.o(.text), UNUSED) + +

    RCC_DeInit (Thumb, 64 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_HSEConfig (Thumb, 70 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_GetFlagStatus (Thumb, 56 bytes, Stack size 8 bytes, stm32f10x_rcc.o(.text), UNUSED) +

    [Called By]

    • >>   RCC_WaitForHSEStartUp +
    + +

    RCC_WaitForHSEStartUp (Thumb, 56 bytes, Stack size 16 bytes, stm32f10x_rcc.o(.text), UNUSED) +

    [Calls]

    • >>   RCC_GetFlagStatus +
    + +

    RCC_AdjustHSICalibrationValue (Thumb, 20 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_HSICmd (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_PLLConfig (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_PLLCmd (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_SYSCLKConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_GetSYSCLKSource (Thumb, 10 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_HCLKConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_PCLK1Config (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_PCLK2Config (Thumb, 20 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_ITConfig (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_USBCLKConfig (Thumb, 8 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_ADCCLKConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_LSEConfig (Thumb, 50 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_LSICmd (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_RTCCLKConfig (Thumb, 12 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_RTCCLKCmd (Thumb, 8 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_GetClocksFreq (Thumb, 192 bytes, Stack size 12 bytes, stm32f10x_rcc.o(.text)) +

    [Stack]

    • Max Depth = 12
    • Call Chain = RCC_GetClocksFreq +
    +
    [Called By]
    • >>   USART_Init +
    + +

    RCC_AHBPeriphClockCmd (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_APB2PeriphClockCmd (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text)) +

    [Called By]

    • >>   Bluetooth_Init +
    • >>   USART1_Init +
    • >>   MOTO_PWM_Init +
    • >>   MOTO_GPIO_Init +
    • >>   LED_GPIO_Config +
    • >>   IIC_Init +
    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    + +

    RCC_APB1PeriphClockCmd (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text)) +

    [Called By]

    • >>   Bluetooth_Init +
    • >>   Timer6_Init +
    • >>   MOTO_PWM_Init +
    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    + +

    RCC_APB2PeriphResetCmd (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) +

    [Called By]

    • >>   USART_DeInit +
    • >>   TIM_DeInit +
    • >>   GPIO_AFIODeInit +
    • >>   GPIO_DeInit +
    + +

    RCC_APB1PeriphResetCmd (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) +

    [Called By]

    • >>   USART_DeInit +
    • >>   TIM_DeInit +
    + +

    RCC_BackupResetCmd (Thumb, 8 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_ClockSecuritySystemCmd (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_MCOConfig (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_ClearFlag (Thumb, 14 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_GetITStatus (Thumb, 20 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    RCC_ClearITPendingBit (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_rcc.o(.text), UNUSED) + +

    TIM_DeInit (Thumb, 424 bytes, Stack size 8 bytes, stm32f10x_tim.o(.text), UNUSED) +

    [Calls]

    • >>   RCC_APB1PeriphResetCmd +
    • >>   RCC_APB2PeriphResetCmd +
    + +

    TIM_TimeBaseInit (Thumb, 122 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   Timer6_Init +
    • >>   MOTO_PWM_Init +
    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    + +

    TIM_OC1Init (Thumb, 132 bytes, Stack size 16 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC2Init (Thumb, 154 bytes, Stack size 16 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC3Init (Thumb, 150 bytes, Stack size 16 bytes, stm32f10x_tim.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = TIM_OC3Init +
    +
    [Called By]
    • >>   MOTO_PWM_Out +
    • >>   MOTO_PWM_Init +
    + +

    TIM_OC4Init (Thumb, 182 bytes, Stack size 16 bytes, stm32f10x_tim.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = TIM_OC4Init +
    +
    [Called By]
    • >>   MOTO_PWM_Out +
    • >>   MOTO_PWM_Init +
    + +

    TIM_SetIC4Prescaler (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   TIM_ICInit +
    + +

    TIM_SetIC3Prescaler (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   TIM_ICInit +
    + +

    TIM_SetIC2Prescaler (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   TIM_PWMIConfig +
    • >>   TIM_ICInit +
    + +

    TIM_SetIC1Prescaler (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   TIM_PWMIConfig +
    • >>   TIM_ICInit +
    + +

    TIM_ICInit (Thumb, 150 bytes, Stack size 16 bytes, stm32f10x_tim.o(.text)) +

    [Stack]

    • Max Depth = 36
    • Call Chain = TIM_ICInit ⇒ TI1_Config +
    +
    [Calls]
    • >>   TIM_SetIC1Prescaler +
    • >>   TIM_SetIC2Prescaler +
    • >>   TIM_SetIC3Prescaler +
    • >>   TIM_SetIC4Prescaler +
    • >>   TI1_Config +
    • >>   TI2_Config +
    • >>   TI3_Config +
    • >>   TI4_Config +
    +
    [Called By]
    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    + +

    TIM_PWMIConfig (Thumb, 124 bytes, Stack size 24 bytes, stm32f10x_tim.o(.text), UNUSED) +

    [Calls]

    • >>   TIM_SetIC1Prescaler +
    • >>   TIM_SetIC2Prescaler +
    • >>   TI1_Config +
    • >>   TI2_Config +
    + +

    TIM_BDTRConfig (Thumb, 32 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_TimeBaseStructInit (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    + +

    TIM_OCStructInit (Thumb, 20 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_ICStructInit (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    + +

    TIM_BDTRStructInit (Thumb, 40 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_Cmd (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   Timer6_Init +
    • >>   MOTO_PWM_Init +
    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    + +

    TIM_CtrlPWMOutputs (Thumb, 30 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_ITConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   Timer6_Init +
    • >>   MOTO_PWM_Init +
    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    + +

    TIM_GenerateEvent (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_DMAConfig (Thumb, 10 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_DMACmd (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_InternalClockConfig (Thumb, 12 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SelectInputTrigger (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) +

    [Called By]

    • >>   TIM_TIxExternalClockConfig +
    • >>   TIM_ITRxExternalClockConfig +
    + +

    TIM_ITRxExternalClockConfig (Thumb, 24 bytes, Stack size 12 bytes, stm32f10x_tim.o(.text), UNUSED) +

    [Calls]

    • >>   TIM_SelectInputTrigger +
    + +

    TIM_TIxExternalClockConfig (Thumb, 62 bytes, Stack size 24 bytes, stm32f10x_tim.o(.text), UNUSED) +

    [Calls]

    • >>   TIM_SelectInputTrigger +
    • >>   TI1_Config +
    • >>   TI2_Config +
    + +

    TIM_ETRConfig (Thumb, 28 bytes, Stack size 12 bytes, stm32f10x_tim.o(.text), UNUSED) +

    [Called By]

    • >>   TIM_ETRClockMode2Config +
    • >>   TIM_ETRClockMode1Config +
    + +

    TIM_ETRClockMode1Config (Thumb, 54 bytes, Stack size 24 bytes, stm32f10x_tim.o(.text), UNUSED) +

    [Calls]

    • >>   TIM_ETRConfig +
    + +

    TIM_ETRClockMode2Config (Thumb, 32 bytes, Stack size 20 bytes, stm32f10x_tim.o(.text), UNUSED) +

    [Calls]

    • >>   TIM_ETRConfig +
    + +

    TIM_PrescalerConfig (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_CounterModeConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_EncoderInterfaceConfig (Thumb, 66 bytes, Stack size 20 bytes, stm32f10x_tim.o(.text)) +

    [Stack]

    • Max Depth = 20
    • Call Chain = TIM_EncoderInterfaceConfig +
    +
    [Called By]
    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    + +

    TIM_ForcedOC1Config (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_ForcedOC2Config (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_ForcedOC3Config (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_ForcedOC4Config (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_ARRPreloadConfig (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   MOTO_PWM_Out +
    • >>   MOTO_PWM_Init +
    + +

    TIM_SelectCOM (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SelectCCDMA (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_CCPreloadControl (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC1PreloadConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC2PreloadConfig (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC3PreloadConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC4PreloadConfig (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC1FastConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC2FastConfig (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC3FastConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC4FastConfig (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_ClearOC1Ref (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_ClearOC2Ref (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_ClearOC3Ref (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_ClearOC4Ref (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC1PolarityConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC1NPolarityConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC2PolarityConfig (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC2NPolarityConfig (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC3PolarityConfig (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   MOTO_PWM_Out +
    • >>   MOTO_PWM_Init +
    + +

    TIM_OC3NPolarityConfig (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_OC4PolarityConfig (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   MOTO_PWM_Out +
    • >>   MOTO_PWM_Init +
    + +

    TIM_CCxCmd (Thumb, 30 bytes, Stack size 12 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_CCxNCmd (Thumb, 30 bytes, Stack size 12 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SelectOCxM (Thumb, 82 bytes, Stack size 16 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_UpdateDisableConfig (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_UpdateRequestConfig (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SelectHallSensor (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SelectOnePulseMode (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SelectOutputTrigger (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SelectSlaveMode (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SelectMasterSlaveMode (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SetCounter (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    + +

    TIM_SetAutoreload (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SetCompare1 (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SetCompare2 (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SetCompare3 (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SetCompare4 (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_SetClockDivision (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_GetCapture1 (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_GetCapture2 (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_GetCapture3 (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_GetCapture4 (Thumb, 8 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_GetCounter (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_GetPrescaler (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_GetFlagStatus (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   TIM6_IRQHandler +
    + +

    TIM_ClearFlag (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   Timer6_Init +
    • >>   MOTO_PWM_Init +
    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    + +

    TIM_GetITStatus (Thumb, 34 bytes, Stack size 12 bytes, stm32f10x_tim.o(.text), UNUSED) + +

    TIM_ClearITPendingBit (Thumb, 6 bytes, Stack size 0 bytes, stm32f10x_tim.o(.text)) +

    [Called By]

    • >>   TIM6_IRQHandler +
    + +

    USART_DeInit (Thumb, 134 bytes, Stack size 8 bytes, stm32f10x_usart.o(.text), UNUSED) +

    [Calls]

    • >>   RCC_APB1PeriphResetCmd +
    • >>   RCC_APB2PeriphResetCmd +
    + +

    USART_Init (Thumb, 210 bytes, Stack size 56 bytes, stm32f10x_usart.o(.text)) +

    [Stack]

    • Max Depth = 68
    • Call Chain = USART_Init ⇒ RCC_GetClocksFreq +
    +
    [Calls]
    • >>   RCC_GetClocksFreq +
    +
    [Called By]
    • >>   Bluetooth_Init +
    • >>   USART1_Init +
    + +

    USART_StructInit (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_ClockInit (Thumb, 34 bytes, Stack size 8 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_ClockStructInit (Thumb, 12 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_Cmd (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text)) +

    [Called By]

    • >>   Bluetooth_Init +
    • >>   USART1_Init +
    + +

    USART_ITConfig (Thumb, 74 bytes, Stack size 20 bytes, stm32f10x_usart.o(.text)) +

    [Stack]

    • Max Depth = 20
    • Call Chain = USART_ITConfig +
    +
    [Called By]
    • >>   Bluetooth_Init +
    • >>   USART1_Init +
    + +

    USART_DMACmd (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_SetAddress (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_WakeUpConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_ReceiverWakeUpCmd (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_LINBreakDetectLengthConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_LINCmd (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_SendData (Thumb, 8 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) +

    [Called By]

    • >>   USART2_Send +
    • >>   USART1_Send +
    • >>   fputc +
    + +

    USART_ReceiveData (Thumb, 10 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text)) +

    [Called By]

    • >>   USART2_IRQHandler +
    • >>   USART1_IRQHandler +
    • >>   fgetc +
    + +

    USART_SendBreak (Thumb, 10 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_SetGuardTime (Thumb, 16 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_SetPrescaler (Thumb, 16 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_SmartCardCmd (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_SmartCardNACKCmd (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_HalfDuplexCmd (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_OverSampling8Cmd (Thumb, 22 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_OneBitMethodCmd (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_IrDAConfig (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_IrDACmd (Thumb, 24 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) + +

    USART_GetFlagStatus (Thumb, 26 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) +

    [Called By]

    • >>   USART2_Send +
    • >>   USART1_Send +
    • >>   fgetc +
    • >>   fputc +
    + +

    USART_ClearFlag (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_usart.o(.text), UNUSED) +

    [Called By]

    • >>   USART2_Send +
    • >>   USART1_Send +
    + +

    USART_GetITStatus (Thumb, 84 bytes, Stack size 16 bytes, stm32f10x_usart.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = USART_GetITStatus +
    +
    [Called By]
    • >>   USART2_IRQHandler +
    • >>   USART1_IRQHandler +
    + +

    USART_ClearITPendingBit (Thumb, 52 bytes, Stack size 8 bytes, stm32f10x_usart.o(.text)) +

    [Stack]

    • Max Depth = 8
    • Call Chain = USART_ClearITPendingBit +
    +
    [Called By]
    • >>   USART2_IRQHandler +
    • >>   USART2_Send +
    • >>   USART1_IRQHandler +
    • >>   USART1_Send +
    + +

    System_Init (Thumb, 202 bytes, Stack size 16 bytes, bsp_sys.o(.text)) +

    [Stack]

    • Max Depth = 128
    • Call Chain = System_Init ⇒ OLED_ShowString ⇒ OLED_ShowChar ⇒ OLED_Set_Pos ⇒ OLED_WR_Byte ⇒ Write_IIC_Data ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   USART1_Init +
    • >>   Timer6_Init +
    • >>   OLED_ShowString +
    • >>   OLED_ShowCHinese +
    • >>   OLED_Init +
    • >>   OLED_Clear +
    • >>   NVIC_Config +
    • >>   MOTO_PWM_Out +
    • >>   MOTO_PWM_Init +
    • >>   MOTO_GPIO_Init +
    • >>   LED_GPIO_Config +
    • >>   IIC_Init +
    • >>   Encoder_Init_TIM4 +
    • >>   Encoder_Init_TIM2 +
    • >>   Delay_ms +
    • >>   Delay_Init +
    +
    [Called By]
    • >>   main +
    + +

    LED_GPIO_Config (Thumb, 40 bytes, Stack size 8 bytes, bsp_gpio.o(.text)) +

    [Stack]

    • Max Depth = 32
    • Call Chain = LED_GPIO_Config ⇒ GPIO_Init +
    +
    [Calls]
    • >>   RCC_APB2PeriphClockCmd +
    • >>   GPIO_Init +
    +
    [Called By]
    • >>   System_Init +
    + +

    LED_Flash (Thumb, 54 bytes, Stack size 16 bytes, bsp_gpio.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = LED_Flash +
    +
    [Calls]
    • >>   GPIO_WriteBit +
    • >>   GPIO_ReadInputDataBit +
    +
    [Called By]
    • >>   TIM6_IRQHandler +
    + +

    NVIC_Config (Thumb, 2 bytes, Stack size 0 bytes, bsp_nvic.o(.text)) +

    [Called By]

    • >>   System_Init +
    + +

    USART1_Init (Thumb, 124 bytes, Stack size 32 bytes, bsp_usart.o(.text)) +

    [Stack]

    • Max Depth = 100
    • Call Chain = USART1_Init ⇒ USART_Init ⇒ RCC_GetClocksFreq +
    +
    [Calls]
    • >>   USART_Init +
    • >>   RCC_APB2PeriphClockCmd +
    • >>   GPIO_Init +
    • >>   USART_ITConfig +
    • >>   USART_Cmd +
    +
    [Called By]
    • >>   System_Init +
    + +

    fputc (Thumb, 32 bytes, Stack size 16 bytes, bsp_usart.o(.text), UNUSED) +

    [Calls]

    • >>   USART_GetFlagStatus +
    • >>   USART_SendData +
    + +

    fgetc (Thumb, 26 bytes, Stack size 8 bytes, bsp_usart.o(.text), UNUSED) +

    [Calls]

    • >>   USART_GetFlagStatus +
    • >>   USART_ReceiveData +
    + +

    USART1_Send (Thumb, 74 bytes, Stack size 16 bytes, bsp_usart.o(.text), UNUSED) +

    [Calls]

    • >>   USART_ClearITPendingBit +
    • >>   USART_ClearFlag +
    • >>   USART_GetFlagStatus +
    • >>   USART_SendData +
    + +

    USART1_Receive (Thumb, 16 bytes, Stack size 0 bytes, bsp_usart.o(.text), UNUSED) + +

    USART1_IRQHandler (Thumb, 72 bytes, Stack size 8 bytes, bsp_usart.o(.text)) +

    [Stack]

    • Max Depth = 24
    • Call Chain = USART1_IRQHandler ⇒ USART_GetITStatus +
    +
    [Calls]
    • >>   USART_ClearITPendingBit +
    • >>   USART_GetITStatus +
    • >>   USART_ReceiveData +
    +
    [Address Reference Count : 1]
    • startup_stm32f10x_hd.o(RESET) +
    +

    Delay_Init (Thumb, 52 bytes, Stack size 8 bytes, delay.o(.text)) +

    [Stack]

    • Max Depth = 8
    • Call Chain = Delay_Init +
    +
    [Calls]
    • >>   SysTick_CLKSourceConfig +
    +
    [Called By]
    • >>   System_Init +
    + +

    Delay_ms (Thumb, 56 bytes, Stack size 0 bytes, delay.o(.text)) +

    [Called By]

    • >>   main +
    • >>   OLED_Init +
    • >>   System_Init +
    + +

    Delay_us (Thumb, 56 bytes, Stack size 0 bytes, delay.o(.text), UNUSED) + +

    i2c_Delay (Thumb, 14 bytes, Stack size 0 bytes, bsp_iic.o(.text)) +

    [Called By]

    • >>   IIC_Wait_Ack +
    • >>   IIC_Read_Byte +
    • >>   IIC_NAck +
    • >>   IIC_Ack +
    • >>   IIC_Send_Byte +
    • >>   IIC_Stop +
    • >>   IIC_Start +
    + +

    IIC_Start (Thumb, 56 bytes, Stack size 8 bytes, bsp_iic.o(.text)) +

    [Stack]

    • Max Depth = 8
    • Call Chain = IIC_Start +
    +
    [Calls]
    • >>   GPIO_ResetBits +
    • >>   GPIO_SetBits +
    • >>   i2c_Delay +
    +
    [Called By]
    • >>   Write_IIC_Data +
    • >>   Write_IIC_Command +
    • >>   i2c_CheckDevice +
    + +

    IIC_Stop (Thumb, 38 bytes, Stack size 8 bytes, bsp_iic.o(.text)) +

    [Stack]

    • Max Depth = 8
    • Call Chain = IIC_Stop +
    +
    [Calls]
    • >>   GPIO_ResetBits +
    • >>   GPIO_SetBits +
    • >>   i2c_Delay +
    +
    [Called By]
    • >>   Write_IIC_Data +
    • >>   Write_IIC_Command +
    • >>   i2c_CheckDevice +
    • >>   IIC_Init +
    + +

    IIC_Send_Byte (Thumb, 96 bytes, Stack size 16 bytes, bsp_iic.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = IIC_Send_Byte +
    +
    [Calls]
    • >>   GPIO_ResetBits +
    • >>   GPIO_SetBits +
    • >>   i2c_Delay +
    +
    [Called By]
    • >>   Write_IIC_Data +
    • >>   Write_IIC_Command +
    • >>   i2c_CheckDevice +
    + +

    IIC_Ack (Thumb, 56 bytes, Stack size 8 bytes, bsp_iic.o(.text), UNUSED) +

    [Calls]

    • >>   GPIO_ResetBits +
    • >>   GPIO_SetBits +
    • >>   i2c_Delay +
    +
    [Called By]
    • >>   IIC_Read_Byte +
    + +

    IIC_NAck (Thumb, 46 bytes, Stack size 8 bytes, bsp_iic.o(.text), UNUSED) +

    [Calls]

    • >>   GPIO_ResetBits +
    • >>   GPIO_SetBits +
    • >>   i2c_Delay +
    +
    [Called By]
    • >>   IIC_Read_Byte +
    + +

    IIC_Read_Byte (Thumb, 82 bytes, Stack size 16 bytes, bsp_iic.o(.text), UNUSED) +

    [Calls]

    • >>   GPIO_ResetBits +
    • >>   GPIO_SetBits +
    • >>   GPIO_ReadInputDataBit +
    • >>   IIC_NAck +
    • >>   IIC_Ack +
    • >>   i2c_Delay +
    + +

    IIC_Wait_Ack (Thumb, 66 bytes, Stack size 8 bytes, bsp_iic.o(.text)) +

    [Stack]

    • Max Depth = 8
    • Call Chain = IIC_Wait_Ack +
    +
    [Calls]
    • >>   GPIO_ResetBits +
    • >>   GPIO_SetBits +
    • >>   GPIO_ReadInputDataBit +
    • >>   i2c_Delay +
    +
    [Called By]
    • >>   Write_IIC_Data +
    • >>   Write_IIC_Command +
    • >>   i2c_CheckDevice +
    + +

    IIC_Init (Thumb, 44 bytes, Stack size 8 bytes, bsp_iic.o(.text)) +

    [Stack]

    • Max Depth = 32
    • Call Chain = IIC_Init ⇒ GPIO_Init +
    +
    [Calls]
    • >>   RCC_APB2PeriphClockCmd +
    • >>   GPIO_Init +
    • >>   IIC_Stop +
    +
    [Called By]
    • >>   i2c_CheckDevice +
    • >>   OLED_Init +
    • >>   System_Init +
    + +

    i2c_CheckDevice (Thumb, 32 bytes, Stack size 16 bytes, bsp_iic.o(.text), UNUSED) +

    [Calls]

    • >>   IIC_Wait_Ack +
    • >>   IIC_Send_Byte +
    • >>   IIC_Stop +
    • >>   IIC_Start +
    • >>   IIC_Init +
    + +

    MOTO_PWM_Init (Thumb, 196 bytes, Stack size 48 bytes, bsp_timer.o(.text)) +

    [Stack]

    • Max Depth = 72
    • Call Chain = MOTO_PWM_Init ⇒ GPIO_Init +
    +
    [Calls]
    • >>   TIM_ClearFlag +
    • >>   TIM_OC4PolarityConfig +
    • >>   TIM_OC3PolarityConfig +
    • >>   TIM_ARRPreloadConfig +
    • >>   TIM_ITConfig +
    • >>   TIM_Cmd +
    • >>   TIM_OC4Init +
    • >>   TIM_OC3Init +
    • >>   TIM_TimeBaseInit +
    • >>   RCC_APB1PeriphClockCmd +
    • >>   RCC_APB2PeriphClockCmd +
    • >>   GPIO_Init +
    +
    [Called By]
    • >>   System_Init +
    + +

    MOTO_PWM_Out (Thumb, 68 bytes, Stack size 32 bytes, bsp_timer.o(.text)) +

    [Stack]

    • Max Depth = 48
    • Call Chain = MOTO_PWM_Out ⇒ TIM_OC4Init +
    +
    [Calls]
    • >>   TIM_OC4PolarityConfig +
    • >>   TIM_OC3PolarityConfig +
    • >>   TIM_ARRPreloadConfig +
    • >>   TIM_OC4Init +
    • >>   TIM_OC3Init +
    +
    [Called By]
    • >>   System_Init +
    + +

    Timer6_Init (Thumb, 114 bytes, Stack size 24 bytes, bsp_timer.o(.text)) +

    [Stack]

    • Max Depth = 40
    • Call Chain = Timer6_Init ⇒ NVIC_Init +
    +
    [Calls]
    • >>   TIM_ClearFlag +
    • >>   TIM_ITConfig +
    • >>   TIM_Cmd +
    • >>   TIM_TimeBaseInit +
    • >>   RCC_APB1PeriphClockCmd +
    • >>   NVIC_Init +
    • >>   NVIC_PriorityGroupConfig +
    +
    [Called By]
    • >>   System_Init +
    + +

    Encoder_Init_TIM2 (Thumb, 154 bytes, Stack size 32 bytes, bsp_timer.o(.text)) +

    [Stack]

    • Max Depth = 68
    • Call Chain = Encoder_Init_TIM2 ⇒ TIM_ICInit ⇒ TI1_Config +
    +
    [Calls]
    • >>   TIM_ClearFlag +
    • >>   TIM_SetCounter +
    • >>   TIM_EncoderInterfaceConfig +
    • >>   TIM_ITConfig +
    • >>   TIM_Cmd +
    • >>   TIM_ICStructInit +
    • >>   TIM_TimeBaseStructInit +
    • >>   TIM_ICInit +
    • >>   TIM_TimeBaseInit +
    • >>   RCC_APB1PeriphClockCmd +
    • >>   RCC_APB2PeriphClockCmd +
    • >>   GPIO_Init +
    +
    [Called By]
    • >>   System_Init +
    + +

    Encoder_Init_TIM4 (Thumb, 148 bytes, Stack size 32 bytes, bsp_timer.o(.text)) +

    [Stack]

    • Max Depth = 68
    • Call Chain = Encoder_Init_TIM4 ⇒ TIM_ICInit ⇒ TI1_Config +
    +
    [Calls]
    • >>   TIM_ClearFlag +
    • >>   TIM_SetCounter +
    • >>   TIM_EncoderInterfaceConfig +
    • >>   TIM_ITConfig +
    • >>   TIM_Cmd +
    • >>   TIM_ICStructInit +
    • >>   TIM_TimeBaseStructInit +
    • >>   TIM_ICInit +
    • >>   TIM_TimeBaseInit +
    • >>   RCC_APB1PeriphClockCmd +
    • >>   RCC_APB2PeriphClockCmd +
    • >>   GPIO_Init +
    +
    [Called By]
    • >>   System_Init +
    + +

    Read_Encoder (Thumb, 84 bytes, Stack size 0 bytes, bsp_timer.o(.text)) +

    [Called By]

    • >>   TIM6_IRQHandler +
    + +

    TIM4_IRQHandler (Thumb, 24 bytes, Stack size 0 bytes, bsp_timer.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    TIM2_IRQHandler (Thumb, 24 bytes, Stack size 0 bytes, bsp_timer.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    MOTO_GPIO_Init (Thumb, 40 bytes, Stack size 8 bytes, moto.o(.text)) +

    [Stack]

    • Max Depth = 32
    • Call Chain = MOTO_GPIO_Init ⇒ GPIO_Init +
    +
    [Calls]
    • >>   RCC_APB2PeriphClockCmd +
    • >>   GPIO_Init +
    +
    [Called By]
    • >>   System_Init +
    + +

    MOTO_Left (Thumb, 92 bytes, Stack size 8 bytes, moto.o(.text)) +

    [Stack]

    • Max Depth = 8
    • Call Chain = MOTO_Left +
    +
    [Calls]
    • >>   GPIO_ResetBits +
    • >>   GPIO_SetBits +
    +
    [Called By]
    • >>   Car_Stop +
    • >>   Car_Turn_Right +
    • >>   Car_Turn_Left +
    • >>   Car_Back +
    • >>   Car_Go +
    + +

    MOTO_Right (Thumb, 62 bytes, Stack size 8 bytes, moto.o(.text)) +

    [Stack]

    • Max Depth = 8
    • Call Chain = MOTO_Right +
    +
    [Calls]
    • >>   GPIO_ResetBits +
    • >>   GPIO_SetBits +
    +
    [Called By]
    • >>   Car_Stop +
    • >>   Car_Turn_Right +
    • >>   Car_Turn_Left +
    • >>   Car_Back +
    • >>   Car_Go +
    + +

    Car_Go (Thumb, 16 bytes, Stack size 8 bytes, moto.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = Car_Go ⇒ MOTO_Right +
    +
    [Calls]
    • >>   MOTO_Right +
    • >>   MOTO_Left +
    +
    [Called By]
    • >>   main +
    + +

    Car_Back (Thumb, 16 bytes, Stack size 8 bytes, moto.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = Car_Back ⇒ MOTO_Right +
    +
    [Calls]
    • >>   MOTO_Right +
    • >>   MOTO_Left +
    +
    [Called By]
    • >>   main +
    + +

    Car_Turn_Left (Thumb, 16 bytes, Stack size 8 bytes, moto.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = Car_Turn_Left ⇒ MOTO_Right +
    +
    [Calls]
    • >>   MOTO_Right +
    • >>   MOTO_Left +
    +
    [Called By]
    • >>   main +
    + +

    Car_Turn_Right (Thumb, 16 bytes, Stack size 8 bytes, moto.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = Car_Turn_Right ⇒ MOTO_Right +
    +
    [Calls]
    • >>   MOTO_Right +
    • >>   MOTO_Left +
    +
    [Called By]
    • >>   main +
    + +

    Car_Stop (Thumb, 16 bytes, Stack size 8 bytes, moto.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = Car_Stop ⇒ MOTO_Right +
    +
    [Calls]
    • >>   MOTO_Right +
    • >>   MOTO_Left +
    +
    [Called By]
    • >>   main +
    + +

    Write_IIC_Command (Thumb, 44 bytes, Stack size 8 bytes, oled.o(.text)) +

    [Stack]

    • Max Depth = 24
    • Call Chain = Write_IIC_Command ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   IIC_Wait_Ack +
    • >>   IIC_Send_Byte +
    • >>   IIC_Stop +
    • >>   IIC_Start +
    +
    [Called By]
    • >>   OLED_WR_Byte +
    + +

    Write_IIC_Data (Thumb, 44 bytes, Stack size 8 bytes, oled.o(.text)) +

    [Stack]

    • Max Depth = 24
    • Call Chain = Write_IIC_Data ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   IIC_Wait_Ack +
    • >>   IIC_Send_Byte +
    • >>   IIC_Stop +
    • >>   IIC_Start +
    +
    [Called By]
    • >>   OLED_WR_Byte +
    + +

    OLED_WR_Byte (Thumb, 24 bytes, Stack size 16 bytes, oled.o(.text)) +

    [Stack]

    • Max Depth = 40
    • Call Chain = OLED_WR_Byte ⇒ Write_IIC_Data ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   Write_IIC_Data +
    • >>   Write_IIC_Command +
    +
    [Called By]
    • >>   OLED_DrawBMP +
    • >>   OLED_ShowChar +
    • >>   OLED_On +
    • >>   OLED_Display_Off +
    • >>   OLED_Display_On +
    • >>   OLED_Set_Pos +
    • >>   fill_picture +
    • >>   OLED_ShowCHinese +
    • >>   OLED_Init +
    • >>   OLED_Clear +
    + +

    fill_picture (Thumb, 64 bytes, Stack size 16 bytes, oled.o(.text), UNUSED) +

    [Calls]

    • >>   OLED_WR_Byte +
    + +

    Delay_50ms (Thumb, 22 bytes, Stack size 0 bytes, oled.o(.text), UNUSED) + +

    Delay_1ms (Thumb, 26 bytes, Stack size 0 bytes, oled.o(.text), UNUSED) + +

    OLED_Set_Pos (Thumb, 40 bytes, Stack size 16 bytes, oled.o(.text)) +

    [Stack]

    • Max Depth = 56
    • Call Chain = OLED_Set_Pos ⇒ OLED_WR_Byte ⇒ Write_IIC_Data ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   OLED_WR_Byte +
    +
    [Called By]
    • >>   OLED_DrawBMP +
    • >>   OLED_ShowChar +
    • >>   OLED_ShowCHinese +
    + +

    OLED_Display_On (Thumb, 28 bytes, Stack size 8 bytes, oled.o(.text), UNUSED) +

    [Calls]

    • >>   OLED_WR_Byte +
    + +

    OLED_Display_Off (Thumb, 28 bytes, Stack size 8 bytes, oled.o(.text), UNUSED) +

    [Calls]

    • >>   OLED_WR_Byte +
    + +

    OLED_Clear (Thumb, 62 bytes, Stack size 16 bytes, oled.o(.text)) +

    [Stack]

    • Max Depth = 56
    • Call Chain = OLED_Clear ⇒ OLED_WR_Byte ⇒ Write_IIC_Data ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   OLED_WR_Byte +
    +
    [Called By]
    • >>   System_Init +
    + +

    OLED_On (Thumb, 62 bytes, Stack size 16 bytes, oled.o(.text), UNUSED) +

    [Calls]

    • >>   OLED_WR_Byte +
    + +

    OLED_ShowChar (Thumb, 154 bytes, Stack size 32 bytes, oled.o(.text)) +

    [Stack]

    • Max Depth = 88
    • Call Chain = OLED_ShowChar ⇒ OLED_Set_Pos ⇒ OLED_WR_Byte ⇒ Write_IIC_Data ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   OLED_Set_Pos +
    • >>   OLED_WR_Byte +
    +
    [Called By]
    • >>   OLED_ShowNum +
    • >>   OLED_ShowString +
    + +

    oled_pow (Thumb, 22 bytes, Stack size 8 bytes, oled.o(.text)) +

    [Stack]

    • Max Depth = 8
    • Call Chain = oled_pow +
    +
    [Called By]
    • >>   OLED_ShowNum +
    + +

    OLED_ShowNum (Thumb, 136 bytes, Stack size 56 bytes, oled.o(.text)) +

    [Stack]

    • Max Depth = 144
    • Call Chain = OLED_ShowNum ⇒ OLED_ShowChar ⇒ OLED_Set_Pos ⇒ OLED_WR_Byte ⇒ Write_IIC_Data ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   oled_pow +
    • >>   OLED_ShowChar +
    +
    [Called By]
    • >>   TIM6_IRQHandler +
    + +

    OLED_ShowString (Thumb, 58 bytes, Stack size 24 bytes, oled.o(.text)) +

    [Stack]

    • Max Depth = 112
    • Call Chain = OLED_ShowString ⇒ OLED_ShowChar ⇒ OLED_Set_Pos ⇒ OLED_WR_Byte ⇒ Write_IIC_Data ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   OLED_ShowChar +
    +
    [Called By]
    • >>   TIM6_IRQHandler +
    • >>   showPID +
    • >>   System_Init +
    + +

    OLED_ShowCHinese (Thumb, 98 bytes, Stack size 24 bytes, oled.o(.text)) +

    [Stack]

    • Max Depth = 80
    • Call Chain = OLED_ShowCHinese ⇒ OLED_Set_Pos ⇒ OLED_WR_Byte ⇒ Write_IIC_Data ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   OLED_Set_Pos +
    • >>   OLED_WR_Byte +
    +
    [Called By]
    • >>   System_Init +
    + +

    OLED_DrawBMP (Thumb, 118 bytes, Stack size 40 bytes, oled.o(.text), UNUSED) +

    [Calls]

    • >>   OLED_Set_Pos +
    • >>   OLED_WR_Byte +
    + +

    OLED_Init (Thumb, 232 bytes, Stack size 8 bytes, oled.o(.text)) +

    [Stack]

    • Max Depth = 48
    • Call Chain = OLED_Init ⇒ OLED_WR_Byte ⇒ Write_IIC_Data ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   OLED_WR_Byte +
    • >>   IIC_Init +
    • >>   Delay_ms +
    +
    [Called By]
    • >>   System_Init +
    + +

    showPID (Thumb, 118 bytes, Stack size 40 bytes, pid.o(.text)) +

    [Stack]

    • Max Depth = 168 + Unknown Stack Size +
    • Call Chain = showPID ⇒ __2sprintf ⇒ _printf_char_common ⇒ __printf +
    +
    [Calls]
    • >>   __aeabi_f2d +
    • >>   __2sprintf +
    • >>   OLED_ShowString +
    +
    [Called By]
    • >>   TIM6_IRQHandler +
    + +

    PID_Calc_Left (Thumb, 114 bytes, Stack size 48 bytes, pid.o(.text)) +

    [Stack]

    • Max Depth = 64
    • Call Chain = PID_Calc_Left ⇒ __aeabi_fmul +
    +
    [Calls]
    • >>   __aeabi_fmul +
    • >>   __aeabi_i2f +
    • >>   __aeabi_f2iz +
    • >>   __aeabi_fsub +
    • >>   __aeabi_fadd +
    +
    [Called By]
    • >>   TIM6_IRQHandler +
    + +

    PID_Calc_Right (Thumb, 114 bytes, Stack size 48 bytes, pid.o(.text)) +

    [Stack]

    • Max Depth = 64
    • Call Chain = PID_Calc_Right ⇒ __aeabi_fmul +
    +
    [Calls]
    • >>   __aeabi_fmul +
    • >>   __aeabi_i2f +
    • >>   __aeabi_f2iz +
    • >>   __aeabi_fsub +
    • >>   __aeabi_fadd +
    +
    [Called By]
    • >>   TIM6_IRQHandler +
    + +

    TIM6_IRQHandler (Thumb, 490 bytes, Stack size 40 bytes, car.o(.text)) +

    [Stack]

    • Max Depth = 208 + Unknown Stack Size +
    • Call Chain = TIM6_IRQHandler ⇒ showPID ⇒ __2sprintf ⇒ _printf_char_common ⇒ __printf +
    +
    [Calls]
    • >>   TIM_ClearITPendingBit +
    • >>   TIM_GetFlagStatus +
    • >>   __aeabi_f2d +
    • >>   __aeabi_dmul +
    • >>   __aeabi_i2d +
    • >>   __aeabi_d2f +
    • >>   __2sprintf +
    • >>   PID_Calc_Right +
    • >>   PID_Calc_Left +
    • >>   showPID +
    • >>   OLED_ShowNum +
    • >>   Read_Encoder +
    • >>   LED_Flash +
    • >>   OLED_ShowString +
    +
    [Address Reference Count : 1]
    • startup_stm32f10x_hd.o(RESET) +
    +

    Bluetooth_Init (Thumb, 162 bytes, Stack size 32 bytes, bluetooth.o(.text)) +

    [Stack]

    • Max Depth = 100
    • Call Chain = Bluetooth_Init ⇒ USART_Init ⇒ RCC_GetClocksFreq +
    +
    [Calls]
    • >>   USART_Init +
    • >>   RCC_APB1PeriphClockCmd +
    • >>   RCC_APB2PeriphClockCmd +
    • >>   GPIO_Init +
    • >>   NVIC_Init +
    • >>   NVIC_PriorityGroupConfig +
    • >>   USART_ITConfig +
    • >>   USART_Cmd +
    +
    [Called By]
    • >>   main +
    + +

    USART2_Send (Thumb, 74 bytes, Stack size 16 bytes, bluetooth.o(.text), UNUSED) +

    [Calls]

    • >>   USART_ClearITPendingBit +
    • >>   USART_ClearFlag +
    • >>   USART_GetFlagStatus +
    • >>   USART_SendData +
    + +

    USART2_Receive (Thumb, 16 bytes, Stack size 0 bytes, bluetooth.o(.text)) +

    [Called By]

    • >>   main +
    + +

    USART2_IRQHandler (Thumb, 72 bytes, Stack size 8 bytes, bluetooth.o(.text)) +

    [Stack]

    • Max Depth = 24
    • Call Chain = USART2_IRQHandler ⇒ USART_GetITStatus +
    +
    [Calls]
    • >>   USART_ClearITPendingBit +
    • >>   USART_GetITStatus +
    • >>   USART_ReceiveData +
    +
    [Address Reference Count : 1]
    • startup_stm32f10x_hd.o(RESET) +
    +

    main (Thumb, 190 bytes, Stack size 0 bytes, main.o(.text)) +

    [Stack]

    • Max Depth = 128
    • Call Chain = main ⇒ System_Init ⇒ OLED_ShowString ⇒ OLED_ShowChar ⇒ OLED_Set_Pos ⇒ OLED_WR_Byte ⇒ Write_IIC_Data ⇒ IIC_Send_Byte +
    +
    [Calls]
    • >>   USART2_Receive +
    • >>   Bluetooth_Init +
    • >>   Car_Stop +
    • >>   Car_Turn_Right +
    • >>   Car_Turn_Left +
    • >>   Car_Back +
    • >>   Car_Go +
    • >>   Delay_ms +
    • >>   System_Init +
    +
    [Called By]
    • >>   __rt_entry_main +
    + +

    NMI_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f10x_it.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    HardFault_Handler (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_it.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    MemManage_Handler (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_it.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    BusFault_Handler (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_it.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    UsageFault_Handler (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_it.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    SVC_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f10x_it.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    DebugMon_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f10x_it.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    PendSV_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f10x_it.o(.text)) +
    [Address Reference Count : 1]

    • startup_stm32f10x_hd.o(RESET) +
    +

    __2sprintf (Thumb, 34 bytes, Stack size 32 bytes, noretval__2sprintf.o(.text)) +

    [Stack]

    • Max Depth = 128 + Unknown Stack Size +
    • Call Chain = __2sprintf ⇒ _printf_char_common ⇒ __printf +
    +
    [Calls]
    • >>   _sputc +
    • >>   _printf_char_common +
    +
    [Called By]
    • >>   TIM6_IRQHandler +
    • >>   showPID +
    + +

    _printf_pre_padding (Thumb, 44 bytes, Stack size 16 bytes, _printf_pad.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = _printf_pre_padding +
    +
    [Called By]
    • >>   _printf_fp_infnan +
    • >>   _printf_fp_dec_real +
    + +

    _printf_post_padding (Thumb, 34 bytes, Stack size 16 bytes, _printf_pad.o(.text)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = _printf_post_padding +
    +
    [Called By]
    • >>   _printf_fp_infnan +
    • >>   _printf_fp_dec_real +
    + +

    __printf (Thumb, 270 bytes, Stack size 32 bytes, __printf_wp.o(.text)) +

    [Stack]

    • Max Depth = 32 + Unknown Stack Size +
    • Call Chain = __printf +
    +
    [Calls]
    • >>   _printf_percent +
    • >>   _is_digit +
    +
    [Called By]
    • >>   _printf_char_common +
    + +

    __use_two_region_memory (Thumb, 2 bytes, Stack size 0 bytes, heapauxi.o(.text), UNUSED) + +

    __rt_heap_escrow$2region (Thumb, 2 bytes, Stack size 0 bytes, heapauxi.o(.text), UNUSED) + +

    __rt_heap_expand$2region (Thumb, 2 bytes, Stack size 0 bytes, heapauxi.o(.text), UNUSED) + +

    __lib_sel_fp_printf (Thumb, 2 bytes, Stack size 0 bytes, _printf_fp_dec.o(.text), UNUSED) + +

    _printf_fp_dec_real (Thumb, 620 bytes, Stack size 104 bytes, _printf_fp_dec.o(.text)) +

    [Stack]

    • Max Depth = 320
    • Call Chain = _printf_fp_dec_real ⇒ _fp_digits ⇒ _btod_etento ⇒ _btod_emul ⇒ _e2e +
    +
    [Calls]
    • >>   __ARM_fpclassify +
    • >>   _printf_fp_infnan +
    • >>   __rt_locale +
    • >>   _fp_digits +
    • >>   _printf_post_padding +
    • >>   _printf_pre_padding +
    +
    [Called By]
    • >>   _printf_fp_dec +
    + +

    _printf_char_common (Thumb, 32 bytes, Stack size 64 bytes, _printf_char_common.o(.text)) +

    [Stack]

    • Max Depth = 96 + Unknown Stack Size +
    • Call Chain = _printf_char_common ⇒ __printf +
    +
    [Calls]
    • >>   __printf +
    +
    [Called By]
    • >>   __2sprintf +
    + +

    _sputc (Thumb, 10 bytes, Stack size 0 bytes, _sputc.o(.text)) +

    [Called By]

    • >>   __2sprintf +
    +
    [Address Reference Count : 1]
    • noretval__2sprintf.o(.text) +
    +

    __rt_locale (Thumb, 8 bytes, Stack size 0 bytes, rt_locale_intlibspace.o(.text)) +

    [Called By]

    • >>   __rt_lib_init_lc_common +
    • >>   _printf_fp_dec_real +
    + +

    _ll_udiv10 (Thumb, 138 bytes, Stack size 12 bytes, lludiv10.o(.text)) +

    [Stack]

    • Max Depth = 12
    • Call Chain = _ll_udiv10 +
    +
    [Called By]
    • >>   _fp_digits +
    + +

    _printf_fp_infnan (Thumb, 112 bytes, Stack size 24 bytes, _printf_fp_infnan.o(.text)) +

    [Stack]

    • Max Depth = 40
    • Call Chain = _printf_fp_infnan ⇒ _printf_post_padding +
    +
    [Calls]
    • >>   _printf_post_padding +
    • >>   _printf_pre_padding +
    +
    [Called By]
    • >>   _printf_fp_dec_real +
    + +

    _btod_etento (Thumb, 216 bytes, Stack size 72 bytes, bigflt0.o(.text)) +

    [Stack]

    • Max Depth = 120
    • Call Chain = _btod_etento ⇒ _btod_emul ⇒ _e2e +
    +
    [Calls]
    • >>   _btod_emul +
    • >>   _btod_ediv +
    +
    [Called By]
    • >>   _fp_digits +
    + +

    __user_libspace (Thumb, 8 bytes, Stack size 0 bytes, libspace.o(.text), UNUSED) + +

    __user_perproc_libspace (Thumb, 0 bytes, Stack size 0 bytes, libspace.o(.text)) +

    [Called By]

    • >>   __user_setup_stackheap +
    + +

    __user_perthread_libspace (Thumb, 0 bytes, Stack size 0 bytes, libspace.o(.text), UNUSED) + +

    __user_setup_stackheap (Thumb, 74 bytes, Stack size 8 bytes, sys_stackheap_outer.o(.text)) +

    [Stack]

    • Max Depth = 8 + Unknown Stack Size +
    • Call Chain = __user_setup_stackheap +
    +
    [Calls]
    • >>   __user_initial_stackheap +
    • >>   __user_perproc_libspace +
    +
    [Called By]
    • >>   __rt_entry_sh +
    + +

    exit (Thumb, 18 bytes, Stack size 8 bytes, exit.o(.text)) +

    [Stack]

    • Max Depth = 8 + Unknown Stack Size +
    • Call Chain = exit +
    +
    [Calls]
    • >>   __rt_exit +
    +
    [Called By]
    • >>   __rt_entry_main +
    + +

    strcmp (Thumb, 128 bytes, Stack size 0 bytes, strcmpv7m.o(.text)) +

    [Called By]

    • >>   _get_lc_numeric +
    + +

    _sys_exit (Thumb, 8 bytes, Stack size 0 bytes, sys_exit.o(.text)) +

    [Called By]

    • >>   __rt_exit_exit +
    + +

    __I$use$semihosting (Thumb, 0 bytes, Stack size 0 bytes, use_no_semi.o(.text), UNUSED) + +

    __use_no_semihosting_swi (Thumb, 2 bytes, Stack size 0 bytes, use_no_semi.o(.text), UNUSED) + +

    __semihosting_library_function (Thumb, 0 bytes, Stack size 0 bytes, indicate_semi.o(.text), UNUSED) + +

    _btod_d2e (Thumb, 62 bytes, Stack size 0 bytes, btod.o(CL$$btod_d2e)) +

    [Calls]

    • >>   _d2e_norm_op1 +
    +
    [Called By]
    • >>   _fp_digits +
    + +

    _d2e_denorm_low (Thumb, 70 bytes, Stack size 0 bytes, btod.o(CL$$btod_d2e_denorm_low)) +

    [Called By]

    • >>   _d2e_norm_op1 +
    + +

    _d2e_norm_op1 (Thumb, 96 bytes, Stack size 0 bytes, btod.o(CL$$btod_d2e_norm_op1)) +

    [Calls]

    • >>   _d2e_denorm_low +
    +
    [Called By]
    • >>   _btod_d2e +
    + +

    __btod_div_common (Thumb, 696 bytes, Stack size 24 bytes, btod.o(CL$$btod_div_common)) +

    [Stack]

    • Max Depth = 24
    • Call Chain = __btod_div_common +
    +
    [Called By]
    • >>   _btod_ediv +
    + +

    _e2e (Thumb, 198 bytes, Stack size 24 bytes, btod.o(CL$$btod_e2e)) +

    [Stack]

    • Max Depth = 24
    • Call Chain = _e2e +
    +
    [Called By]
    • >>   _btod_emul +
    • >>   _btod_ediv +
    + +

    _btod_ediv (Thumb, 40 bytes, Stack size 24 bytes, btod.o(CL$$btod_ediv)) +

    [Stack]

    • Max Depth = 48
    • Call Chain = _btod_ediv ⇒ _e2e +
    +
    [Calls]
    • >>   _e2e +
    • >>   __btod_div_common +
    +
    [Called By]
    • >>   _btod_etento +
    • >>   _fp_digits +
    + +

    _btod_emul (Thumb, 40 bytes, Stack size 24 bytes, btod.o(CL$$btod_emul)) +

    [Stack]

    • Max Depth = 48
    • Call Chain = _btod_emul ⇒ _e2e +
    +
    [Calls]
    • >>   __btod_mult_common +
    • >>   _e2e +
    +
    [Called By]
    • >>   _btod_etento +
    • >>   _fp_digits +
    + +

    __btod_mult_common (Thumb, 580 bytes, Stack size 16 bytes, btod.o(CL$$btod_mult_common)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = __btod_mult_common +
    +
    [Called By]
    • >>   _btod_emul +
    + +

    __ARM_fpclassify (Thumb, 40 bytes, Stack size 0 bytes, fpclassify.o(i.__ARM_fpclassify)) +

    [Called By]

    • >>   _printf_fp_dec_real +
    + +

    _is_digit (Thumb, 14 bytes, Stack size 0 bytes, __printf_wp.o(i._is_digit)) +

    [Called By]

    • >>   __printf +
    + +

    _get_lc_numeric (Thumb, 44 bytes, Stack size 8 bytes, lc_numeric_c.o(locale$$code)) +

    [Stack]

    • Max Depth = 8
    • Call Chain = _get_lc_numeric +
    +
    [Calls]
    • >>   strcmp +
    +
    [Called By]
    • >>   __rt_lib_init_lc_numeric_2 +
    + +

    __aeabi_d2f (Thumb, 0 bytes, Stack size 32 bytes, d2f.o(x$fpl$d2f)) +

    [Stack]

    • Max Depth = 32
    • Call Chain = __aeabi_d2f +
    +
    [Called By]
    • >>   TIM6_IRQHandler +
    + +

    _d2f (Thumb, 98 bytes, Stack size 32 bytes, d2f.o(x$fpl$d2f), UNUSED) +

    [Calls]

    • >>   __fpl_fretinf +
    • >>   __fpl_dnaninf +
    + +

    __aeabi_i2d (Thumb, 0 bytes, Stack size 0 bytes, dflt_clz.o(x$fpl$dflt)) +

    [Called By]

    • >>   TIM6_IRQHandler +
    + +

    _dflt (Thumb, 46 bytes, Stack size 0 bytes, dflt_clz.o(x$fpl$dflt), UNUSED) + +

    __aeabi_dmul (Thumb, 0 bytes, Stack size 32 bytes, dmul.o(x$fpl$dmul)) +

    [Stack]

    • Max Depth = 32
    • Call Chain = __aeabi_dmul +
    +
    [Called By]
    • >>   TIM6_IRQHandler +
    + +

    _dmul (Thumb, 332 bytes, Stack size 32 bytes, dmul.o(x$fpl$dmul), UNUSED) +

    [Calls]

    • >>   __fpl_dretinf +
    • >>   __fpl_dnaninf +
    + +

    __fpl_dnaninf (Thumb, 156 bytes, Stack size 16 bytes, dnaninf.o(x$fpl$dnaninf), UNUSED) +

    [Called By]

    • >>   _dmul +
    • >>   _d2f +
    + +

    __fpl_dretinf (Thumb, 12 bytes, Stack size 0 bytes, dretinf.o(x$fpl$dretinf), UNUSED) +

    [Called By]

    • >>   _f2d +
    • >>   _dmul +
    + +

    __aeabi_f2d (Thumb, 0 bytes, Stack size 16 bytes, f2d.o(x$fpl$f2d)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = __aeabi_f2d +
    +
    [Called By]
    • >>   TIM6_IRQHandler +
    • >>   showPID +
    + +

    _f2d (Thumb, 86 bytes, Stack size 16 bytes, f2d.o(x$fpl$f2d), UNUSED) +

    [Calls]

    • >>   __fpl_fnaninf +
    • >>   __fpl_dretinf +
    + +

    __aeabi_fadd (Thumb, 0 bytes, Stack size 16 bytes, faddsub_clz.o(x$fpl$fadd)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = __aeabi_fadd +
    +
    [Called By]
    • >>   PID_Calc_Right +
    • >>   PID_Calc_Left +
    + +

    _fadd (Thumb, 196 bytes, Stack size 16 bytes, faddsub_clz.o(x$fpl$fadd), UNUSED) +

    [Calls]

    • >>   __fpl_fretinf +
    • >>   __fpl_fnaninf +
    • >>   _fsub1 +
    + +

    __aeabi_f2iz (Thumb, 0 bytes, Stack size 16 bytes, ffix.o(x$fpl$ffix)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = __aeabi_f2iz +
    +
    [Called By]
    • >>   PID_Calc_Right +
    • >>   PID_Calc_Left +
    + +

    _ffix (Thumb, 54 bytes, Stack size 16 bytes, ffix.o(x$fpl$ffix), UNUSED) +

    [Calls]

    • >>   __fpl_fnaninf +
    + +

    __aeabi_i2f (Thumb, 0 bytes, Stack size 0 bytes, fflt_clz.o(x$fpl$fflt)) +

    [Called By]

    • >>   PID_Calc_Right +
    • >>   PID_Calc_Left +
    + +

    _fflt (Thumb, 48 bytes, Stack size 0 bytes, fflt_clz.o(x$fpl$fflt), UNUSED) + +

    __aeabi_fmul (Thumb, 0 bytes, Stack size 16 bytes, fmul.o(x$fpl$fmul)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = __aeabi_fmul +
    +
    [Called By]
    • >>   PID_Calc_Right +
    • >>   PID_Calc_Left +
    + +

    _fmul (Thumb, 258 bytes, Stack size 16 bytes, fmul.o(x$fpl$fmul), UNUSED) +

    [Calls]

    • >>   __fpl_fretinf +
    • >>   __fpl_fnaninf +
    + +

    __fpl_fnaninf (Thumb, 140 bytes, Stack size 8 bytes, fnaninf.o(x$fpl$fnaninf), UNUSED) +

    [Called By]

    • >>   _fmul +
    • >>   _ffix +
    • >>   _fsub +
    • >>   _fadd +
    • >>   _f2d +
    + +

    __fpl_fretinf (Thumb, 10 bytes, Stack size 0 bytes, fretinf.o(x$fpl$fretinf), UNUSED) +

    [Called By]

    • >>   _fmul +
    • >>   _fadd +
    • >>   _d2f +
    + +

    __aeabi_fsub (Thumb, 0 bytes, Stack size 16 bytes, faddsub_clz.o(x$fpl$fsub)) +

    [Stack]

    • Max Depth = 16
    • Call Chain = __aeabi_fsub +
    +
    [Called By]
    • >>   PID_Calc_Right +
    • >>   PID_Calc_Left +
    + +

    _fsub (Thumb, 234 bytes, Stack size 16 bytes, faddsub_clz.o(x$fpl$fsub), UNUSED) +

    [Calls]

    • >>   __fpl_fnaninf +
    • >>   _fadd1 +
    + +

    _printf_fp_dec (Thumb, 4 bytes, Stack size 0 bytes, printf1.o(x$fpl$printf1)) +

    [Stack]

    • Max Depth = 320
    • Call Chain = _printf_fp_dec ⇒ _printf_fp_dec_real ⇒ _fp_digits ⇒ _btod_etento ⇒ _btod_emul ⇒ _e2e +
    +
    [Calls]
    • >>   _printf_fp_dec_real +
    +
    [Called By]
    • >>   _printf_f +
    +

    +

    +Local Symbols +

    +

    SetSysClockTo72 (Thumb, 214 bytes, Stack size 12 bytes, system_stm32f10x.o(.text)) +

    [Stack]

    • Max Depth = 12
    • Call Chain = SetSysClockTo72 +
    +
    [Called By]
    • >>   SetSysClock +
    + +

    SetSysClock (Thumb, 8 bytes, Stack size 8 bytes, system_stm32f10x.o(.text)) +

    [Stack]

    • Max Depth = 20
    • Call Chain = SetSysClock ⇒ SetSysClockTo72 +
    +
    [Calls]
    • >>   SetSysClockTo72 +
    +
    [Called By]
    • >>   SystemInit +
    + +

    TI4_Config (Thumb, 130 bytes, Stack size 20 bytes, stm32f10x_tim.o(.text)) +

    [Stack]

    • Max Depth = 20
    • Call Chain = TI4_Config +
    +
    [Called By]
    • >>   TIM_ICInit +
    + +

    TI3_Config (Thumb, 122 bytes, Stack size 20 bytes, stm32f10x_tim.o(.text)) +

    [Stack]

    • Max Depth = 20
    • Call Chain = TI3_Config +
    +
    [Called By]
    • >>   TIM_ICInit +
    + +

    TI2_Config (Thumb, 130 bytes, Stack size 20 bytes, stm32f10x_tim.o(.text)) +

    [Stack]

    • Max Depth = 20
    • Call Chain = TI2_Config +
    +
    [Called By]
    • >>   TIM_TIxExternalClockConfig +
    • >>   TIM_PWMIConfig +
    • >>   TIM_ICInit +
    + +

    TI1_Config (Thumb, 108 bytes, Stack size 20 bytes, stm32f10x_tim.o(.text)) +

    [Stack]

    • Max Depth = 20
    • Call Chain = TI1_Config +
    +
    [Called By]
    • >>   TIM_TIxExternalClockConfig +
    • >>   TIM_PWMIConfig +
    • >>   TIM_ICInit +
    + +

    _fadd1 (Thumb, 0 bytes, Stack size unknown bytes, faddsub_clz.o(x$fpl$fadd), UNUSED) +

    [Called By]

    • >>   _fsub +
    + +

    _fsub1 (Thumb, 0 bytes, Stack size unknown bytes, faddsub_clz.o(x$fpl$fsub), UNUSED) +

    [Called By]

    • >>   _fadd +
    + +

    _fp_digits (Thumb, 428 bytes, Stack size 96 bytes, _printf_fp_dec.o(.text)) +

    [Stack]

    • Max Depth = 216
    • Call Chain = _fp_digits ⇒ _btod_etento ⇒ _btod_emul ⇒ _e2e +
    +
    [Calls]
    • >>   _btod_emul +
    • >>   _btod_ediv +
    • >>   _btod_d2e +
    • >>   _btod_etento +
    • >>   _ll_udiv10 +
    +
    [Called By]
    • >>   _printf_fp_dec_real +
    + +

    _printf_input_char (Thumb, 10 bytes, Stack size 0 bytes, _printf_char_common.o(.text)) +
    [Address Reference Count : 1]

    • _printf_char_common.o(.text) +

    +

    +Undefined Global Symbols +

    diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.lnp b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.lnp new file mode 100644 index 0000000..aeec6e5 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.lnp @@ -0,0 +1,45 @@ +--cpu Cortex-M3 +"..\output\startup_stm32f10x_hd.o" +"..\output\core_cm3.o" +"..\output\system_stm32f10x.o" +"..\output\misc.o" +"..\output\stm32f10x_adc.o" +"..\output\stm32f10x_bkp.o" +"..\output\stm32f10x_can.o" +"..\output\stm32f10x_cec.o" +"..\output\stm32f10x_crc.o" +"..\output\stm32f10x_dac.o" +"..\output\stm32f10x_dbgmcu.o" +"..\output\stm32f10x_dma.o" +"..\output\stm32f10x_exti.o" +"..\output\stm32f10x_flash.o" +"..\output\stm32f10x_fsmc.o" +"..\output\stm32f10x_gpio.o" +"..\output\stm32f10x_i2c.o" +"..\output\stm32f10x_iwdg.o" +"..\output\stm32f10x_pwr.o" +"..\output\stm32f10x_rcc.o" +"..\output\stm32f10x_rtc.o" +"..\output\stm32f10x_sdio.o" +"..\output\stm32f10x_spi.o" +"..\output\stm32f10x_tim.o" +"..\output\stm32f10x_usart.o" +"..\output\stm32f10x_wwdg.o" +"..\output\bsp_sys.o" +"..\output\bsp_gpio.o" +"..\output\bsp_nvic.o" +"..\output\bsp_usart.o" +"..\output\delay.o" +"..\output\bsp_iic.o" +"..\output\bsp_timer.o" +"..\output\moto.o" +"..\output\oled.o" +"..\output\pid.o" +"..\output\car.o" +"..\output\bluetooth.o" +"..\output\main.o" +"..\output\stm32f10x_it.o" +--strict --scatter "..\Output\Project.sct" +--summary_stderr --info summarysizes --map --xref --callgraph --symbols +--info sizes --info totals --info unused --info veneers +--list "..\Listing\Project.map" -o ..\Output\Project.axf \ No newline at end of file diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.plg b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.plg new file mode 100644 index 0000000..10479f5 --- /dev/null +++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.plg @@ -0,0 +1,529 @@ + + +
    +
    Vision Build Log
    
+
    Project:
    
+C:\Users\Administrator\Desktop\TX\Project\Project.uvproj
+Project File Date:  02/08/2017
+
+
    Output:
    
+Build target 'PROJECT'
+linking...
+..\Output\Project.axf: Error: L6218E: Undefined symbol NRF24L01_Check (referred from main.o).
+..\Output\Project.axf: Error: L6218E: Undefined symbol NRF24L01_Init (referred from main.o).
+..\Output\Project.axf: Error: L6218E: Undefined symbol NRF24L01_TxPacket (referred from main.o).
+..\Output\Project.axf: Error: L6218E: Undefined symbol TX_Mode (referred from main.o).
+"..\Output\Project.axf" - 4 Errors, 0 Warning(s).
+Target not created
+Build target 'PROJECT'
+linking...
+..\Output\Project.axf: Error: L6218E: Undefined symbol NRF24L01_Check (referred from main.o).
+..\Output\Project.axf: Error: L6218E: Undefined symbol NRF24L01_Init (referred from main.o).
+..\Output\Project.axf: Error: L6218E: Undefined symbol NRF24L01_TxPacket (referred from main.o).
+..\Output\Project.axf: Error: L6218E: Undefined symbol TX_Mode (referred from main.o).
+"..\Output\Project.axf" - 4 Errors, 0 Warning(s).
+Target not created
+Build target 'PROJECT'
+compiling core_cm3.c...
+compiling system_stm32f10x.c...
+compiling misc.c...
+compiling stm32f10x_adc.c...
+compiling stm32f10x_bkp.c...
+compiling stm32f10x_can.c...
+compiling stm32f10x_cec.c...
+compiling stm32f10x_crc.c...
+compiling stm32f10x_dac.c...
+compiling stm32f10x_dbgmcu.c...
+compiling stm32f10x_dma.c...
+compiling stm32f10x_exti.c...
+compiling stm32f10x_flash.c...
+compiling stm32f10x_fsmc.c...
+compiling stm32f10x_gpio.c...
+compiling stm32f10x_i2c.c...
+compiling stm32f10x_iwdg.c...
+compiling stm32f10x_pwr.c...
+compiling stm32f10x_rcc.c...
+compiling stm32f10x_rtc.c...
+compiling stm32f10x_sdio.c...
+compiling stm32f10x_spi.c...
+compiling stm32f10x_tim.c...
+compiling stm32f10x_usart.c...
+compiling stm32f10x_wwdg.c...
+compiling delay.c...
+compiling bsp_NVIC.C...
+compiling bsp_iic.c...
+compiling bsp_GPIO.c...
+compiling bsp_usart.c...
+compiling 24cxx.c...
+compiling oled.c...
+compiling 24l01.c...
+..\HARDWARE\24L01\24l01.c(3): error:  #5: cannot open source input file "bsp_spi.h": No such file or directory
+compiling main.c...
+compiling stm32f10x_it.c...
+"..\Output\Project.axf" - 1 Errors, 0 Warning(s).
+Target not created
+Build target 'PROJECT'
+compiling core_cm3.c...
+compiling system_stm32f10x.c...
+compiling misc.c...
+compiling stm32f10x_adc.c...
+compiling stm32f10x_bkp.c...
+compiling stm32f10x_can.c...
+compiling stm32f10x_cec.c...
+compiling stm32f10x_crc.c...
+compiling stm32f10x_dac.c...
+compiling stm32f10x_dbgmcu.c...
+compiling stm32f10x_dma.c...
+compiling stm32f10x_exti.c...
+compiling stm32f10x_flash.c...
+compiling stm32f10x_fsmc.c...
+compiling stm32f10x_gpio.c...
+compiling stm32f10x_i2c.c...
+compiling stm32f10x_iwdg.c...
+compiling stm32f10x_pwr.c...
+compiling stm32f10x_rcc.c...
+compiling stm32f10x_rtc.c...
+compiling stm32f10x_sdio.c...
+compiling stm32f10x_spi.c...
+compiling stm32f10x_tim.c...
+compiling stm32f10x_usart.c...
+compiling stm32f10x_wwdg.c...
+compiling delay.c...
+compiling bsp_NVIC.C...
+compiling bsp_iic.c...
+compiling bsp_GPIO.c...
+compiling bsp_usart.c...
+compiling bsp_spi.c...
+compiling 24cxx.c...
+compiling oled.c...
+compiling 24l01.c...
+compiling main.c...
+compiling stm32f10x_it.c...
+linking...
+Program Size: Code=11120 RO-data=2364 RW-data=964 ZI-data=1908  
+FromELF: creating hex file...
+"..\Output\Project.axf" - 0 Errors, 0 Warning(s).
+Load "..\\Output\\Project.axf" 
+Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini"
+* JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM).
+ 
+JLink info:
+------------
+DLL: V4.90 , compiled Jul 28 2014 10:35:20
+Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
+Hardware: V7.00
+S/N : 20090928 
+Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
+ 
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found Cortex-M3 r1p1, Little endian.
+* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
+* JLink Info: TPIU fitted.
+ROMTableAddr = 0xE00FF003
+ 
+Target info:
+------------
+Device: STM32F103C8
+VTarget = 3.300V
+State of Pins: 
+TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
+Hardware-Breakpoints: 6
+Software-Breakpoints: 8192
+Watchpoints:          4
+JTAG speed: 1000 kHz
+ 
+Erase Done.
+Programming Done.
+Verify OK.
+Application running ...
+Build target 'PROJECT'
+compiling 24l01.c...
+compiling main.c...
+linking...
+Program Size: Code=11116 RO-data=2364 RW-data=964 ZI-data=1908  
+FromELF: creating hex file...
+"..\Output\Project.axf" - 0 Errors, 0 Warning(s).
+Load "..\\Output\\Project.axf" 
+Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini"
+* JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM).
+ 
+JLink info:
+------------
+DLL: V4.90 , compiled Jul 28 2014 10:35:20
+Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
+Hardware: V7.00
+S/N : 20090928 
+Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
+ 
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found Cortex-M3 r1p1, Little endian.
+* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
+* JLink Info: TPIU fitted.
+ROMTableAddr = 0xE00FF003
+ 
+Target info:
+------------
+Device: STM32F103C8
+VTarget = 3.300V
+State of Pins: 
+TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
+Hardware-Breakpoints: 6
+Software-Breakpoints: 8192
+Watchpoints:          4
+JTAG speed: 1000 kHz
+ 
+Erase Done.
+Programming Done.
+Verify OK.
+Application running ...
+Load "..\\Output\\Project.axf" 
+Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini"
+* JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM).
+ 
+JLink info:
+------------
+DLL: V4.90 , compiled Jul 28 2014 10:35:20
+Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
+Hardware: V7.00
+S/N : 20090928 
+Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
+ 
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found Cortex-M3 r1p1, Little endian.
+* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
+* JLink Info: TPIU fitted.
+ROMTableAddr = 0xE00FF003
+ 
+Target info:
+------------
+Device: STM32F103C8
+VTarget = 3.300V
+State of Pins: 
+TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
+Hardware-Breakpoints: 6
+Software-Breakpoints: 8192
+Watchpoints:          4
+JTAG speed: 1000 kHz
+ 
+Erase Done.
+Programming Done.
+Verify OK.
+Application running ...
+Build target 'PROJECT'
+compiling main.c...
+..\User\main.c(40): warning:  #177-D: variable "tmp" was declared but never referenced
+linking...
+Program Size: Code=11012 RO-data=2364 RW-data=964 ZI-data=1908  
+FromELF: creating hex file...
+"..\Output\Project.axf" - 0 Errors, 1 Warning(s).
+Load "..\\Output\\Project.axf" 
+Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini"
+* JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM).
+ 
+JLink info:
+------------
+DLL: V4.90 , compiled Jul 28 2014 10:35:20
+Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
+Hardware: V7.00
+S/N : 20090928 
+Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
+ 
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found Cortex-M3 r1p1, Little endian.
+* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
+* JLink Info: TPIU fitted.
+ROMTableAddr = 0xE00FF003
+ 
+Target info:
+------------
+Device: STM32F103C8
+VTarget = 3.300V
+State of Pins: 
+TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
+Hardware-Breakpoints: 6
+Software-Breakpoints: 8192
+Watchpoints:          4
+JTAG speed: 1000 kHz
+ 
+Erase Done.
+Programming Done.
+Verify OK.
+Application running ...
+Build target 'PROJECT'
+compiling main.c...
+..\User\main.c(40): warning:  #177-D: variable "tmp" was declared but never referenced
+linking...
+Program Size: Code=11008 RO-data=2364 RW-data=964 ZI-data=1908  
+FromELF: creating hex file...
+"..\Output\Project.axf" - 0 Errors, 1 Warning(s).
+Load "..\\Output\\Project.axf" 
+Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini"
+* JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM).
+ 
+JLink info:
+------------
+DLL: V4.90 , compiled Jul 28 2014 10:35:20
+Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
+Hardware: V7.00
+S/N : 20090928 
+Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
+ 
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found Cortex-M3 r1p1, Little endian.
+* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
+* JLink Info: TPIU fitted.
+ROMTableAddr = 0xE00FF003
+ 
+Target info:
+------------
+Device: STM32F103C8
+VTarget = 3.300V
+State of Pins: 
+TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
+Hardware-Breakpoints: 6
+Software-Breakpoints: 8192
+Watchpoints:          4
+JTAG speed: 1000 kHz
+ 
+Erase Done.
+Programming Done.
+Verify OK.
+Application running ...
+Build target 'PROJECT'
+compiling main.c...
+..\User\main.c(40): warning:  #177-D: variable "tmp" was declared but never referenced
+..\User\main.c(42): warning:  #177-D: variable "p" was declared but never referenced
+linking...
+Program Size: Code=6914 RO-data=2342 RW-data=952 ZI-data=1632  
+FromELF: creating hex file...
+"..\Output\Project.axf" - 0 Errors, 2 Warning(s).
+Load "..\\Output\\Project.axf" 
+Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini"
+* JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM).
+ 
+JLink info:
+------------
+DLL: V4.90 , compiled Jul 28 2014 10:35:20
+Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
+Hardware: V7.00
+S/N : 20090928 
+Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
+ 
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found Cortex-M3 r1p1, Little endian.
+* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
+* JLink Info: TPIU fitted.
+ROMTableAddr = 0xE00FF003
+ 
+Target info:
+------------
+Device: STM32F103C8
+VTarget = 3.300V
+State of Pins: 
+TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
+Hardware-Breakpoints: 6
+Software-Breakpoints: 8192
+Watchpoints:          4
+JTAG speed: 1000 kHz
+ 
+Erase Done.
+Programming Done.
+Verify OK.
+Application running ...
+Build target 'PROJECT'
+compiling main.c...
+..\User\main.c(42): warning:  #177-D: variable "p" was declared but never referenced
+linking...
+Program Size: Code=8746 RO-data=2350 RW-data=952 ZI-data=1656  
+FromELF: creating hex file...
+"..\Output\Project.axf" - 0 Errors, 1 Warning(s).
+Load "..\\Output\\Project.axf" 
+Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini"
+* JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM).
+ 
+JLink info:
+------------
+DLL: V4.90 , compiled Jul 28 2014 10:35:20
+Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
+Hardware: V7.00
+S/N : 20090928 
+Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
+ 
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found Cortex-M3 r1p1, Little endian.
+* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
+* JLink Info: TPIU fitted.
+ROMTableAddr = 0xE00FF003
+ 
+Target info:
+------------
+Device: STM32F103C8
+VTarget = 3.300V
+State of Pins: 
+TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
+Hardware-Breakpoints: 6
+Software-Breakpoints: 8192
+Watchpoints:          4
+JTAG speed: 1000 kHz
+ 
+Erase Done.
+Programming Done.
+Verify OK.
+Application running ...
+Build target 'PROJECT'
+compiling main.c...
+..\User\main.c(42): warning:  #177-D: variable "p" was declared but never referenced
+linking...
+Program Size: Code=8750 RO-data=2350 RW-data=952 ZI-data=1656  
+FromELF: creating hex file...
+"..\Output\Project.axf" - 0 Errors, 1 Warning(s).
+Load "..\\Output\\Project.axf" 
+Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini"
+* JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM).
+ 
+JLink info:
+------------
+DLL: V4.90 , compiled Jul 28 2014 10:35:20
+Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
+Hardware: V7.00
+S/N : 20090928 
+Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
+ 
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found Cortex-M3 r1p1, Little endian.
+* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
+* JLink Info: TPIU fitted.
+ROMTableAddr = 0xE00FF003
+ 
+Target info:
+------------
+Device: STM32F103C8
+VTarget = 3.300V
+State of Pins: 
+TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
+Hardware-Breakpoints: 6
+Software-Breakpoints: 8192
+Watchpoints:          4
+JTAG speed: 1000 kHz
+ 
+Erase Done.
+Programming Done.
+Verify OK.
+Application running ...
+Build target 'PROJECT'
+compiling main.c...
+linking...
+Program Size: Code=8806 RO-data=2350 RW-data=952 ZI-data=1688  
+FromELF: creating hex file...
+"..\Output\Project.axf" - 0 Errors, 0 Warning(s).
+Load "..\\Output\\Project.axf" 
+Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini"
+* JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM).
+ 
+JLink info:
+------------
+DLL: V4.90 , compiled Jul 28 2014 10:35:20
+Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
+Hardware: V7.00
+S/N : 20090928 
+Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
+ 
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found Cortex-M3 r1p1, Little endian.
+* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
+* JLink Info: TPIU fitted.
+ROMTableAddr = 0xE00FF003
+ 
+Target info:
+------------
+Device: STM32F103C8
+VTarget = 3.300V
+State of Pins: 
+TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
+Hardware-Breakpoints: 6
+Software-Breakpoints: 8192
+Watchpoints:          4
+JTAG speed: 1000 kHz
+ 
+Erase Done.
+Programming Done.
+Verify OK.
+Application running ...
+Load "..\\Output\\Project.axf" 
+Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini"
+* JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM).
+ 
+JLink info:
+------------
+DLL: V4.90 , compiled Jul 28 2014 10:35:20
+Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
+Hardware: V7.00
+S/N : 20090928 
+Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
+ 
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found Cortex-M3 r1p1, Little endian.
+* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
+* JLink Info: TPIU fitted.
+ROMTableAddr = 0xE00FF003
+ 
+Target info:
+------------
+Device: STM32F103C8
+VTarget = 3.300V
+State of Pins: 
+TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
+Hardware-Breakpoints: 6
+Software-Breakpoints: 8192
+Watchpoints:          4
+JTAG speed: 1000 kHz
+ 
+Erase Done.
+Programming Done.
+Verify OK.
+Application running ...
+Load "..\\Output\\Project.axf" 
+Set JLink Project File to "C:\Users\Administrator\Desktop\TX\Project\JLinkSettings.ini"
+* JLink Info: Device "STM32F103C8" selected (64 KB flash, 20 KB RAM).
+ 
+JLink info:
+------------
+DLL: V4.90 , compiled Jul 28 2014 10:35:20
+Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
+Hardware: V7.00
+S/N : 20090928 
+Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull 
+ 
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found SWD-DP with ID 0x1BA01477
+* JLink Info: Found Cortex-M3 r1p1, Little endian.
+* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
+* JLink Info: TPIU fitted.
+* JLink Info: ETM fitted.
+ROMTableAddr = 0xE00FF003
+ 
+Target info:
+------------
+Device: STM32F103C8
+VTarget = 3.300V
+State of Pins: 
+TCK: 0, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1
+Hardware-Breakpoints: 6
+Software-Breakpoints: 8192
+Watchpoints:          4
+JTAG speed: 1000 kHz
+ 
+Erase Done.
+Programming Done.
+Verify OK.
+Application running ...
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.sct b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.sct
new file mode 100644
index 0000000..fd82337
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project.sct	
@@ -0,0 +1,15 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00040000  {    ; load region size_region
+  ER_IROM1 0x08000000 0x00040000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x20000000 0x0000C000  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+}
+
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project_PROJECT.dep b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project_PROJECT.dep
new file mode 100644
index 0000000..ebb3db5
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project_PROJECT.dep	
@@ -0,0 +1,1165 @@
+Dependencies for Project 'Project', Target 'PROJECT': (DO NOT MODIFY !)
+F (..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s)(0x658A79FA)(--cpu Cortex-M3 -g --apcs=interwork 

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

--pd "__UVISION_VERSION SETA 521" --pd "STM32F10X_HD SETA 1"

--list ..\listing\startup_stm32f10x_hd.lst --xref -o ..\output\startup_stm32f10x_hd.o --depend ..\output\startup_stm32f10x_hd.d)
+F (..\Libraries\CMSIS\core_cm3.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\core_cm3.o --omf_browse ..\output\core_cm3.crf --depend ..\output\core_cm3.d)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+F (..\Libraries\CMSIS\system_stm32f10x.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\system_stm32f10x.o --omf_browse ..\output\system_stm32f10x.crf --depend ..\output\system_stm32f10x.d)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\misc.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\misc.o --omf_browse ..\output\misc.crf --depend ..\output\misc.d)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_adc.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_adc.o --omf_browse ..\output\stm32f10x_adc.crf --depend ..\output\stm32f10x_adc.d)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_bkp.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_bkp.o --omf_browse ..\output\stm32f10x_bkp.crf --depend ..\output\stm32f10x_bkp.d)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_can.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_can.o --omf_browse ..\output\stm32f10x_can.crf --depend ..\output\stm32f10x_can.d)
+I (..\Libraries\FWlib\inc\stm32f10x_can.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_cec.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_cec.o --omf_browse ..\output\stm32f10x_cec.crf --depend ..\output\stm32f10x_cec.d)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_crc.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_crc.o --omf_browse ..\output\stm32f10x_crc.crf --depend ..\output\stm32f10x_crc.d)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_dac.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_dac.o --omf_browse ..\output\stm32f10x_dac.crf --depend ..\output\stm32f10x_dac.d)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_dbgmcu.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_dbgmcu.o --omf_browse ..\output\stm32f10x_dbgmcu.crf --depend ..\output\stm32f10x_dbgmcu.d)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_dma.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_dma.o --omf_browse ..\output\stm32f10x_dma.crf --depend ..\output\stm32f10x_dma.d)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_exti.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_exti.o --omf_browse ..\output\stm32f10x_exti.crf --depend ..\output\stm32f10x_exti.d)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_flash.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_flash.o --omf_browse ..\output\stm32f10x_flash.crf --depend ..\output\stm32f10x_flash.d)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_fsmc.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_fsmc.o --omf_browse ..\output\stm32f10x_fsmc.crf --depend ..\output\stm32f10x_fsmc.d)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_gpio.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_gpio.o --omf_browse ..\output\stm32f10x_gpio.crf --depend ..\output\stm32f10x_gpio.d)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_i2c.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_i2c.o --omf_browse ..\output\stm32f10x_i2c.crf --depend ..\output\stm32f10x_i2c.d)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_iwdg.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_iwdg.o --omf_browse ..\output\stm32f10x_iwdg.crf --depend ..\output\stm32f10x_iwdg.d)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_pwr.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_pwr.o --omf_browse ..\output\stm32f10x_pwr.crf --depend ..\output\stm32f10x_pwr.d)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_rcc.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_rcc.o --omf_browse ..\output\stm32f10x_rcc.crf --depend ..\output\stm32f10x_rcc.d)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_rtc.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_rtc.o --omf_browse ..\output\stm32f10x_rtc.crf --depend ..\output\stm32f10x_rtc.d)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_sdio.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_sdio.o --omf_browse ..\output\stm32f10x_sdio.crf --depend ..\output\stm32f10x_sdio.d)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_spi.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_spi.o --omf_browse ..\output\stm32f10x_spi.crf --depend ..\output\stm32f10x_spi.d)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_tim.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_tim.o --omf_browse ..\output\stm32f10x_tim.crf --depend ..\output\stm32f10x_tim.d)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_usart.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_usart.o --omf_browse ..\output\stm32f10x_usart.crf --depend ..\output\stm32f10x_usart.d)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\Libraries\FWlib\src\stm32f10x_wwdg.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_wwdg.o --omf_browse ..\output\stm32f10x_wwdg.crf --depend ..\output\stm32f10x_wwdg.d)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\DRV\bsp_sys.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\bsp_sys.o --omf_browse ..\output\bsp_sys.crf --depend ..\output\bsp_sys.d)
+I (..\DRV\bsp_sys.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+I (..\DRV\delay.h)(0x658A79FA)
+I (..\DRV\bsp_GPIO.h)(0x658A79FA)
+I (..\DRV\bsp_nvic.h)(0x658A79FA)
+I (..\DRV\bsp_usart.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdio.h)(0x574E3E26)
+I (..\DRV\bsp_timer.h)(0x658A79FA)
+I (..\DRV\bsp_iic.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\inttypes.h)(0x574E3E26)
+I (..\HARDWARE\OLED\oled.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdlib.h)(0x574E3E26)
+I (..\HARDWARE\MOTO\moto.h)(0x658A79FA)
+I (..\HARDWARE\PID\pid.h)(0x658A79FA)
+F (..\DRV\bsp_GPIO.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\bsp_gpio.o --omf_browse ..\output\bsp_gpio.crf --depend ..\output\bsp_gpio.d)
+I (..\DRV\bsp_GPIO.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\DRV\bsp_NVIC.C)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\bsp_nvic.o --omf_browse ..\output\bsp_nvic.crf --depend ..\output\bsp_nvic.d)
+I (..\DRV\bsp_nvic.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\DRV\bsp_usart.c)(0x659E9FF5)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\bsp_usart.o --omf_browse ..\output\bsp_usart.crf --depend ..\output\bsp_usart.d)
+I (..\DRV\bsp_usart.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdio.h)(0x574E3E26)
+F (..\DRV\delay.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\delay.o --omf_browse ..\output\delay.crf --depend ..\output\delay.d)
+I (..\DRV\delay.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\DRV\bsp_iic.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\bsp_iic.o --omf_browse ..\output\bsp_iic.crf --depend ..\output\bsp_iic.d)
+I (..\DRV\bsp_iic.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\inttypes.h)(0x574E3E26)
+F (..\DRV\bsp_timer.c)(0x659E662F)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\bsp_timer.o --omf_browse ..\output\bsp_timer.crf --depend ..\output\bsp_timer.d)
+I (..\DRV\bsp_timer.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+F (..\HARDWARE\MOTO\moto.c)(0x659F6C62)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\moto.o --omf_browse ..\output\moto.crf --depend ..\output\moto.d)
+I (..\HARDWARE\MOTO\moto.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+I (..\DRV\bsp_sys.h)(0x658A79FA)
+I (..\DRV\delay.h)(0x658A79FA)
+I (..\DRV\bsp_GPIO.h)(0x658A79FA)
+I (..\DRV\bsp_nvic.h)(0x658A79FA)
+I (..\DRV\bsp_usart.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdio.h)(0x574E3E26)
+I (..\DRV\bsp_timer.h)(0x658A79FA)
+I (..\DRV\bsp_iic.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\inttypes.h)(0x574E3E26)
+I (..\HARDWARE\OLED\oled.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdlib.h)(0x574E3E26)
+I (..\HARDWARE\PID\pid.h)(0x658A79FA)
+F (..\HARDWARE\OLED\oled.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\oled.o --omf_browse ..\output\oled.crf --depend ..\output\oled.d)
+I (..\HARDWARE\OLED\oled.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdlib.h)(0x574E3E26)
+I (..\HARDWARE\OLED\oledfont.h)(0x658A79FA)
+I (..\DRV\delay.h)(0x658A79FA)
+I (..\DRV\bsp_iic.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\inttypes.h)(0x574E3E26)
+F (..\HARDWARE\PID\pid.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\pid.o --omf_browse ..\output\pid.crf --depend ..\output\pid.d)
+I (..\HARDWARE\PID\pid.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+I (..\DRV\bsp_sys.h)(0x658A79FA)
+I (..\DRV\delay.h)(0x658A79FA)
+I (..\DRV\bsp_GPIO.h)(0x658A79FA)
+I (..\DRV\bsp_nvic.h)(0x658A79FA)
+I (..\DRV\bsp_usart.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdio.h)(0x574E3E26)
+I (..\DRV\bsp_timer.h)(0x658A79FA)
+I (..\DRV\bsp_iic.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\inttypes.h)(0x574E3E26)
+I (..\HARDWARE\OLED\oled.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdlib.h)(0x574E3E26)
+I (..\HARDWARE\MOTO\moto.h)(0x658A79FA)
+F (..\HARDWARE\MOTO\car.c)(0x659E6F06)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\car.o --omf_browse ..\output\car.crf --depend ..\output\car.d)
+I (..\HARDWARE\MOTO\car.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+I (..\DRV\bsp_sys.h)(0x658A79FA)
+I (..\DRV\delay.h)(0x658A79FA)
+I (..\DRV\bsp_GPIO.h)(0x658A79FA)
+I (..\DRV\bsp_nvic.h)(0x658A79FA)
+I (..\DRV\bsp_usart.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdio.h)(0x574E3E26)
+I (..\DRV\bsp_timer.h)(0x658A79FA)
+I (..\DRV\bsp_iic.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\inttypes.h)(0x574E3E26)
+I (..\HARDWARE\OLED\oled.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdlib.h)(0x574E3E26)
+I (..\HARDWARE\MOTO\moto.h)(0x658A79FA)
+I (..\HARDWARE\PID\pid.h)(0x658A79FA)
+F (..\HARDWARE\MOTO\bluetooth.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\bluetooth.o --omf_browse ..\output\bluetooth.crf --depend ..\output\bluetooth.d)
+I (..\HARDWARE\MOTO\bluetooth.h)(0x658A79FA)
+I (..\DRV\bsp_sys.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+I (..\DRV\delay.h)(0x658A79FA)
+I (..\DRV\bsp_GPIO.h)(0x658A79FA)
+I (..\DRV\bsp_nvic.h)(0x658A79FA)
+I (..\DRV\bsp_usart.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdio.h)(0x574E3E26)
+I (..\DRV\bsp_timer.h)(0x658A79FA)
+I (..\DRV\bsp_iic.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\inttypes.h)(0x574E3E26)
+I (..\HARDWARE\OLED\oled.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdlib.h)(0x574E3E26)
+I (..\HARDWARE\MOTO\moto.h)(0x658A79FA)
+I (..\HARDWARE\PID\pid.h)(0x658A79FA)
+F (..\User\main.c)(0x659F6CFD)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\main.o --omf_browse ..\output\main.crf --depend ..\output\main.d)
+I (..\DRV\bsp_sys.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
+I (..\DRV\delay.h)(0x658A79FA)
+I (..\DRV\bsp_GPIO.h)(0x658A79FA)
+I (..\DRV\bsp_nvic.h)(0x658A79FA)
+I (..\DRV\bsp_usart.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdio.h)(0x574E3E26)
+I (..\DRV\bsp_timer.h)(0x658A79FA)
+I (..\DRV\bsp_iic.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\inttypes.h)(0x574E3E26)
+I (..\HARDWARE\OLED\oled.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdlib.h)(0x574E3E26)
+I (..\HARDWARE\MOTO\moto.h)(0x658A79FA)
+I (..\HARDWARE\PID\pid.h)(0x658A79FA)
+I (..\HARDWARE\MOTO\bluetooth.h)(0x658A79FA)
+F (..\User\stm32f10x_it.c)(0x658A79FA)(--c99 -c --cpu Cortex-M3 -g -O0 --apcs=interwork -I ..\Libraries\CMSIS -I ..\Libraries\FWlib\inc -I ..\Libraries\FWlib\src -I ..\User -I ..\DRV -I ..\HARDWARE -I ..\HARDWARE\MOTO -I ..\HARDWARE\OLED -I ..\HARDWARE\PID

-I"D:\Hardware Project\RobotHardware-UESTC\Hardware\Firmware\GeekRobotBig_Firmware v1.0\Project\RTE"

-I"D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Device\Include"

-I"D:\Program Files\Keilv5\ARM\CMSIS\Include"

-D__UVISION_VERSION="521" -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\output\stm32f10x_it.o --omf_browse ..\output\stm32f10x_it.crf --depend ..\output\stm32f10x_it.d)
+I (..\User\stm32f10x_it.h)(0x658A79FA)
+I (..\Libraries\CMSIS\stm32f10x.h)(0x658A79FA)
+I (..\Libraries\CMSIS\core_cm3.h)(0x658A79FA)
+I (D:\Program Files\Keilv5\ARM\ARMCC\include\stdint.h)(0x574E3E26)
+I (..\Libraries\CMSIS\system_stm32f10x.h)(0x658A79FA)
+I (..\User\stm32f10x_conf.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_adc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_cec.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_crc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dac.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_dma.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_exti.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_flash.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_spi.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_tim.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_usart.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x658A79FA)
+I (..\Libraries\FWlib\inc\misc.h)(0x658A79FA)
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project_sct.Bak b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project_sct.Bak
new file mode 100644
index 0000000..c26b647
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Output/Project_sct.Bak	
@@ -0,0 +1,15 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00020000  {    ; load region size_region
+  ER_IROM1 0x08000000 0x00020000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x20000000 0x00005000  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+}
+
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/DebugConfig/PROJECT_STM32F103RB_1.0.0.dbgconf b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/DebugConfig/PROJECT_STM32F103RB_1.0.0.dbgconf
new file mode 100644
index 0000000..90dabd8
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/DebugConfig/PROJECT_STM32F103RB_1.0.0.dbgconf	
@@ -0,0 +1,97 @@
+// <<< Use Configuration Wizard in Context Menu >>>
+//  Debug MCU Configuration
+//       DBG_SLEEP
+//  Debug Sleep Mode
+//  0: (FCLK=On, HCLK=Off) FCLK is clocked by the system clock as previously configured by the software while HCLK is disabled
+//  1: (FCLK=On, HCLK=On) HCLK is fed by the same clock that is provided to FCLK
+//       DBG_STOP
+//  Debug Stop Mode
+//  0: (FCLK=Off, HCLK=Off) Clock controller disables all clocks
+//  1: (FCLK=On, HCLK=On) FCLK and HCLK are provided by the internal RC oscillator which remains active
+//       DBG_STANDBY
+//  Debug Standby Mode
+//  0: (FCLK=Off, HCLK=Off) The whole digital part is unpowered.
+//  1: (FCLK=On, HCLK=On) Digital part is powered and FCLK and HCLK are provided by the internal RC oscillator which remains active
+//       DBG_IWDG_STOP
+//  Debug independent watchdog stopped when core is halted
+//  0: The watchdog counter clock continues even if the core is halted
+//  1: The watchdog counter clock is stopped when the core is halted
+//       DBG_WWDG_STOP
+//  Debug window watchdog stopped when core is halted
+//  0: The window watchdog counter clock continues even if the core is halted
+//  1: The window watchdog counter clock is stopped when the core is halted
+//      DBG_TIM1_STOP
+//  Timer 1 counter stopped when core is halted
+//  0: The clock of the involved Timer Counter is fed even if the core is halted
+//  1: The clock of the involved Timer counter is stopped when the core is halted
+//      DBG_TIM2_STOP
+//  Timer 2 counter stopped when core is halted
+//  0: The clock of the involved Timer Counter is fed even if the core is halted
+//  1: The clock of the involved Timer counter is stopped when the core is halted
+//      DBG_TIM3_STOP
+//  Timer 3 counter stopped when core is halted
+//  0: The clock of the involved Timer Counter is fed even if the core is halted
+//  1: The clock of the involved Timer counter is stopped when the core is halted
+//      DBG_TIM4_STOP
+//  Timer 4 counter stopped when core is halted
+//  0: The clock of the involved Timer Counter is fed even if the core is halted
+//  1: The clock of the involved Timer counter is stopped when the core is halted
+//      DBG_CAN1_STOP
+//  Debug CAN1 stopped when Core is halted
+//  0: Same behavior as in normal mode
+//  1: CAN1 receive registers are frozen
+//      DBG_I2C1_SMBUS_TIMEOUT
+//  I2C1 SMBUS timeout mode stopped when Core is halted
+//  0: Same behavior as in normal mode
+//  1: The SMBUS timeout is frozen
+//      DBG_I2C2_SMBUS_TIMEOUT
+//  I2C2 SMBUS timeout mode stopped when Core is halted
+//  0: Same behavior as in normal mode
+//  1: The SMBUS timeout is frozen
+//      DBG_TIM8_STOP
+//  Timer 8 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM5_STOP
+//  Timer 5 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM6_STOP
+//  Timer 6 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM7_STOP
+//  Timer 7 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_CAN2_STOP
+//  Debug CAN2 stopped when Core is halted
+//  0: Same behavior as in normal mode
+//  1: CAN2 receive registers are frozen
+//      DBG_TIM12_STOP
+//  Timer 12 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM13_STOP
+//  Timer 13 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM14_STOP
+//  Timer 14 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM9_STOP
+//  Timer 9 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM10_STOP
+//  Timer 10 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM11_STOP
+//  Timer 11 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+// 
+DbgMCU_CR = 0x00000007;
+// <<< end of configuration section >>>
\ No newline at end of file
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/JLink Regs CM3.txt b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/JLink Regs CM3.txt
new file mode 100644
index 0000000..08327ff
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/JLink Regs CM3.txt	
@@ -0,0 +1,32 @@
+0: R0: 0x00
+1: R1: 0x01
+2: R2: 0x02
+3: R3: 0x03
+4: R4: 0x04
+5: R5: 0x05
+6: R6: 0x06
+7: R7: 0x07
+8: R8: 0x08
+9: R9: 0x09
+10: R10: 0x0a
+11: R11: 0x0b
+12: R12: 0x0c
+13: R13: 0x0d
+14: R14: 0x0e
+15: R15: 0x0f
+16: XPSR: 0x10
+17: MSP: 0x11
+18: PSP: 0x12
+19: RAZ: 0x13
+20: CFBP: 0x14
+21: APSR: 0x15
+22: EPSR: 0x16
+23: IPSR: 0x17
+24: PRIMASK: 0x18
+25: BASEPRI: 0x19
+26: FAULTMASK: 0x1a
+27: CONTROL: 0x1b
+28: BASEPRI_MAX: 0x1c
+29: IAPSR: 0x1d
+30: EAPSR: 0x1e
+31: IEPSR: 0x1f
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/JLinkLog.txt b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/JLinkLog.txt
new file mode 100644
index 0000000..2cf42bc
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/JLinkLog.txt	
@@ -0,0 +1,1284 @@
+
+T110C 000:336 SEGGER J-Link V4.96d Log File (0001ms, 0276ms total)
+T110C 000:336 DLL Compiled: Jan 29 2015 11:45:37 (0001ms, 0276ms total)
+T110C 000:336 Logging started @ 2020-05-10 23:41 (0001ms, 0276ms total)
+T110C 000:337 JLINK_SetWarnOutHandler(...) (0000ms, 0276ms total)
+T110C 000:337 JLINK_OpenEx(...)
+Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
+Hardware: V7.00
+S/N: 20090928
+Feature(s): RDI,FlashDL,FlashBP,JFlash,GDBFull  returns O.K. (0270ms, 0546ms total)
+T110C 000:607 JLINK_SetErrorOutHandler(...) (0000ms, 0546ms total)
+T110C 000:607 JLINK_ExecCommand("ProjectFile = "G:\ϿƼ\С\stm32С\װSTM32-RCT6-PID\STM32ֲٴPIDС\4-С\2\1-ֱPIDOLEDʾ\Project\JLinkSettings.ini"", ...)  returns 0x00 (0002ms, 0548ms total)
+T110C 000:633 JLINK_ExecCommand("Device = STM32F103RC", ...)Device "STM32F103RC" selected.  returns 0x00 (0010ms, 0558ms total)
+T110C 000:643 JLINK_ExecCommand("DisableConnectionTimeout", ...)  returns 0x01 (0000ms, 0558ms total)
+T110C 000:643 JLINK_GetHardwareVersion()  returns 0x11170 (0000ms, 0558ms total)
+T110C 000:643 JLINK_GetDLLVersion()  returns 49604 (0000ms, 0558ms total)
+T110C 000:643 JLINK_GetFirmwareString(...) (0000ms, 0558ms total)
+T110C 000:676 JLINK_GetDLLVersion()  returns 49604 (0000ms, 0558ms total)
+T110C 000:676 JLINK_GetCompileDateTime() (0000ms, 0558ms total)
+T110C 000:680 JLINK_GetFirmwareString(...) (0000ms, 0558ms total)
+T110C 000:685 JLINK_GetHardwareVersion()  returns 0x11170 (0000ms, 0558ms total)
+T110C 000:700 JLINK_TIF_Select(JLINKARM_TIF_SWD)  returns 0x00 (0004ms, 0562ms total)
+T110C 000:704 JLINK_SetSpeed(3000) (0001ms, 0563ms total)
+T110C 000:705 JLINK_GetId() >0x108 TIF>Found SWD-DP with ID 0x1BA01477 >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x28 TIF> >0x108 TIF>Found SWD-DP with ID 0x1BA01477 >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x28 TIF>
+ >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x28 TIF> >0x0D TIF> >0x21 TIF> >0x0D TIF> >0x21 TIF>Found Cortex-M3 r1p1, Little endian. -- CPU_WriteMem(4 bytes @ 0xE0002000) -- CPU_ReadMem(4 bytes @ 0xE000EDF0) -- CPU_WriteMem(4 bytes @ 0xE000EDF0)
+ -- CPU_ReadMem(4 bytes @ 0xE0002000)FPUnit: 6 code (BP) slots and 2 literal slots -- CPU_ReadMem(4 bytes @ 0xE000EDFC) -- CPU_WriteMem(4 bytes @ 0xE000EDFC) -- CPU_ReadMem(4 bytes @ 0xE0001000) -- CPU_WriteMem(4 bytes @ 0xE0001000) -- CPU_ReadMem(4 bytes @ 0xE000ED88) -- CPU_WriteMem(4 bytes @ 0xE000ED88) -- CPU_ReadMem(4 bytes @ 0xE000ED88) -- CPU_WriteMem(4 bytes @ 0xE000ED88) -- CPU_ReadMem(4 bytes @ 0xE00FF010)TPIU fitted. -- CPU_ReadMem(4 bytes @ 0xE00FF014)ETM fitted.
+ -- CPU_ReadMem(4 bytes @ 0xE00FF018) >0x0D TIF> >0x21 TIF>  returns 0x1BA01477 (0125ms, 0688ms total)
+T110C 000:830 JLINK_GetDLLVersion()  returns 49604 (0000ms, 0688ms total)
+T110C 000:830 JLINK_CORE_GetFound()  returns 0x30000FF (0000ms, 0688ms total)
+T110C 000:830 JLINK_GetDebugInfo(0x100) -- Value=0xE00FF003  returns 0x00 (0000ms, 0688ms total)
+T110C 000:833 JLINK_ReadMem (0xE00FF000, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE00FF000) - Data: 03 F0 F0 FF 03 20 F0 FF 03 30 F0 FF 03 10 F0 FF ...  returns 0x00 (0002ms, 0690ms total)
+T110C 000:835 JLINK_ReadMem (0xE000EFF0, 0x0010 Bytes, ...) -- CPU is running -- CPU_ReadMem(16 bytes @ 0xE000EFF0) - Data: 0D 00 00 00 E0 00 00 00 05 00 00 00 B1 00 00 00  returns 0x00 (0001ms, 0691ms total)
+T110C 000:836 JLINK_ReadMem (0xE000EFD0, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE000EFD0) - Data: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...  returns 0x00 (0002ms, 0693ms total)
+T110C 000:838 JLINK_ReadMem (0xE0001FF0, 0x0010 Bytes, ...) -- CPU is running -- CPU_ReadMem(16 bytes @ 0xE0001FF0) - Data: 0D 00 00 00 E0 00 00 00 05 00 00 00 B1 00 00 00  returns 0x00 (0002ms, 0695ms total)
+T110C 000:840 JLINK_ReadMem (0xE0001FD0, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE0001FD0) - Data: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...  returns 0x00 (0002ms, 0697ms total)
+T110C 000:842 JLINK_ReadMem (0xE0002FF0, 0x0010 Bytes, ...) -- CPU is running -- CPU_ReadMem(16 bytes @ 0xE0002FF0) - Data: 0D 00 00 00 E0 00 00 00 05 00 00 00 B1 00 00 00  returns 0x00 (0001ms, 0698ms total)
+T110C 000:843 JLINK_ReadMem (0xE0002FD0, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE0002FD0) - Data: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...  returns 0x00 (0002ms, 0700ms total)
+T110C 000:845 JLINK_ReadMem (0xE0000FF0, 0x0010 Bytes, ...) -- CPU is running -- CPU_ReadMem(16 bytes @ 0xE0000FF0) - Data: 0D 00 00 00 E0 00 00 00 05 00 00 00 B1 00 00 00  returns 0x00 (0002ms, 0702ms total)
+T110C 000:847 JLINK_ReadMem (0xE0000FD0, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE0000FD0) - Data: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...  returns 0x00 (0002ms, 0704ms total)
+T110C 000:849 JLINK_ReadMem (0xE0040FF0, 0x0010 Bytes, ...) -- CPU is running -- CPU_ReadMem(16 bytes @ 0xE0040FF0) - Data: 0D 00 00 00 90 00 00 00 05 00 00 00 B1 00 00 00  returns 0x00 (0002ms, 0706ms total)
+T110C 000:851 JLINK_ReadMem (0xE0040FD0, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE0040FD0) - Data: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...  returns 0x00 (0002ms, 0708ms total)
+T110C 000:853 JLINK_ReadMem (0xE0041FF0, 0x0010 Bytes, ...) -- CPU is running -- CPU_ReadMem(16 bytes @ 0xE0041FF0) - Data: 0D 00 00 00 90 00 00 00 05 00 00 00 B1 00 00 00  returns 0x00 (0002ms, 0710ms total)
+T110C 000:855 JLINK_ReadMem (0xE0041FD0, 0x0020 Bytes, ...) -- CPU is running -- CPU_ReadMem(32 bytes @ 0xE0041FD0) - Data: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...  returns 0x00 (0001ms, 0711ms total)
+T110C 000:857 JLINK_ReadMemU32(0xE000ED00, 0x0001 Items, ...) -- CPU is running -- CPU_ReadMem(4 bytes @ 0xE000ED00) - Data: 31 C2 1F 41  returns 0x01 (0001ms, 0712ms total)
+T110C 000:858 JLINK_SetResetType(JLINKARM_RESET_TYPE_NORMAL)  returns JLINKARM_RESET_TYPE_NORMAL (0000ms, 0712ms total)
+T110C 000:858 JLINK_Reset() -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE000EDF0) -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE000EDFC) >0x35 TIF> -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE000ED0C) -- CPU is running -- CPU_ReadMem(4 bytes @ 0xE000EDF0) -- CPU is running -- CPU_ReadMem(4 bytes @ 0xE000EDF0) -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE000EDF0) -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE000EDFC) -- CPU is running -- CPU_ReadMem(4 bytes @ 0xE000EDF0)
+ -- CPU_WriteMem(4 bytes @ 0xE0002000) -- CPU_ReadMem(4 bytes @ 0xE000EDFC) -- CPU_ReadMem(4 bytes @ 0xE0001000) (0035ms, 0747ms total)
+T110C 000:893 JLINK_Halt()  returns 0x00 (0000ms, 0747ms total)
+T110C 000:893 JLINK_IsHalted()  returns TRUE (0000ms, 0747ms total)
+T110C 000:893 JLINK_ReadMemU32(0xE000EDF0, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE000EDF0) - Data: 03 00 03 00  returns 0x01 (0001ms, 0748ms total)
+T110C 000:894 JLINK_WriteU32(0xE000EDF0, 0xA05F0003) -- CPU_WriteMem(4 bytes @ 0xE000EDF0)  returns 0x00 (0002ms, 0750ms total)
+T110C 000:896 JLINK_WriteU32(0xE000EDFC, 0x01000000) -- CPU_WriteMem(4 bytes @ 0xE000EDFC)  returns 0x00 (0002ms, 0752ms total)
+T110C 000:910 JLINK_GetHWStatus(...)  returns 0x00 (0002ms, 0754ms total)
+T110C 000:920 JLINK_GetNumBPUnits(Type = 0xFFFFFF00)  returns 0x06 (0000ms, 0754ms total)
+T110C 000:920 JLINK_GetNumBPUnits(Type = 0xF0)  returns 0x2000 (0000ms, 0754ms total)
+T110C 000:920 JLINK_GetNumWPUnits()  returns 0x04 (0000ms, 0754ms total)
+T110C 000:929 JLINK_GetSpeed()  returns 0xA6B (0000ms, 0754ms total)
+T110C 000:935 JLINK_ReadMemU32(0xE000E004, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE000E004) - Data: 01 00 00 00  returns 0x01 (0002ms, 0756ms total)
+T110C 000:937 JLINK_ReadMemU32(0xE000E004, 0x0001 Items, ...) -- CPU_ReadMem(4 bytes @ 0xE000E004) - Data: 01 00 00 00  returns 0x01 (0001ms, 0757ms total)
+T110C 000:938 JLINK_WriteMem(0xE0001000, 0x001C Bytes, ...) - Data: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... -- CPU_WriteMem(28 bytes @ 0xE0001000)  returns 0x1C (0003ms, 0760ms total)
+T110C 000:941 JLINK_ReadMem (0xE0001000, 0x001C Bytes, ...) -- CPU_ReadMem(28 bytes @ 0xE0001000) - Data: 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 ...  returns 0x00 (0002ms, 0762ms total)
+T110C 000:943 JLINK_Halt()  returns 0x00 (0000ms, 0762ms total)
+T110C 000:943 JLINK_IsHalted()  returns TRUE (0000ms, 0762ms total)
+T110C 000:947 JLINK_WriteMem(0x20000000, 0x0164 Bytes, ...) - Data: 00 BE 0A E0 0D 78 2D 06 68 40 08 24 40 00 00 D3 ... -- CPU_WriteMem(356 bytes @ 0x20000000)  returns 0x164 (0006ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R0, 0x08000000)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R1, 0x00B71B00)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R2, 0x00000001)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(R15 (PC), 0x20000038)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:954 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0768ms total)
+T110C 000:955 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0769ms total)
+T110C 000:955 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2) -- CPU_ReadMem(2 bytes @ 0x20000000)  returns 0x00000001 (0001ms, 0770ms total)
+T110C 000:956 JLINK_Go() -- CPU_WriteMem(2 bytes @ 0x20000000) -- CPU_WriteMem(4 bytes @ 0xE0002008) -- CPU_WriteMem(4 bytes @ 0xE000200C) -- CPU_WriteMem(4 bytes @ 0xE0002010) -- CPU_WriteMem(4 bytes @ 0xE0002014) -- CPU_WriteMem(4 bytes @ 0xE0002018) -- CPU_WriteMem(4 bytes @ 0xE000201C) -- CPU_WriteMem(4 bytes @ 0xE0001004) (0011ms, 0781ms total)
+T110C 000:967 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0007ms, 0788ms total)
+T110C 000:974 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0781ms total)
+T110C 000:974 JLINK_ClrBPEx(BPHandle = 0x00000001)  returns 0x00 (0000ms, 0781ms total)
+T110C 000:974 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0781ms total)
+T110C 000:975 JLINK_WriteReg(R0, 0x08000000)  returns 0x00 (0000ms, 0781ms total)
+T110C 000:975 JLINK_WriteReg(R1, 0x00000800)  returns 0x00 (0000ms, 0781ms total)
+T110C 000:975 JLINK_WriteReg(R2, 0x000000FF)  returns 0x00 (0000ms, 0781ms total)
+T110C 000:975 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0001ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(R15 (PC), 0x20000020)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0782ms total)
+T110C 000:976 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000002 (0000ms, 0782ms total)
+T110C 000:976 JLINK_Go() (0003ms, 0785ms total)
+T110C 000:979 JLINK_IsHalted()  returns FALSE (0002ms, 0787ms total)
+T110C 001:070 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0007ms, 0792ms total)
+T110C 001:077 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0785ms total)
+T110C 001:077 JLINK_ClrBPEx(BPHandle = 0x00000002)  returns 0x00 (0001ms, 0786ms total)
+T110C 001:078 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0786ms total)
+T110C 001:078 JLINK_WriteReg(R0, 0x08000800)  returns 0x00 (0000ms, 0786ms total)
+T110C 001:078 JLINK_WriteReg(R1, 0x00000800)  returns 0x00 (0001ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R2, 0x000000FF)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(R15 (PC), 0x20000020)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0787ms total)
+T110C 001:079 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0001ms, 0788ms total)
+T110C 001:080 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0788ms total)
+T110C 001:080 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0788ms total)
+T110C 001:080 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000003 (0000ms, 0788ms total)
+T110C 001:080 JLINK_Go() (0003ms, 0791ms total)
+T110C 001:083 JLINK_IsHalted()  returns FALSE (0001ms, 0792ms total)
+T110C 001:100 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0797ms total)
+T110C 001:106 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0791ms total)
+T110C 001:106 JLINK_ClrBPEx(BPHandle = 0x00000003)  returns 0x00 (0000ms, 0791ms total)
+T110C 001:106 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0791ms total)
+T110C 001:107 JLINK_WriteReg(R0, 0x08001000)  returns 0x00 (0000ms, 0791ms total)
+T110C 001:107 JLINK_WriteReg(R1, 0x00000800)  returns 0x00 (0000ms, 0791ms total)
+T110C 001:107 JLINK_WriteReg(R2, 0x000000FF)  returns 0x00 (0001ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(R15 (PC), 0x20000020)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0792ms total)
+T110C 001:108 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0001ms, 0793ms total)
+T110C 001:109 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0793ms total)
+T110C 001:109 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000004 (0000ms, 0793ms total)
+T110C 001:109 JLINK_Go() (0003ms, 0796ms total)
+T110C 001:112 JLINK_IsHalted()  returns FALSE (0002ms, 0798ms total)
+T110C 001:117 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0802ms total)
+T110C 001:123 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0796ms total)
+T110C 001:123 JLINK_ClrBPEx(BPHandle = 0x00000004)  returns 0x00 (0000ms, 0796ms total)
+T110C 001:123 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0796ms total)
+T110C 001:124 JLINK_WriteReg(R0, 0x08001800)  returns 0x00 (0000ms, 0796ms total)
+T110C 001:124 JLINK_WriteReg(R1, 0x00000800)  returns 0x00 (0000ms, 0796ms total)
+T110C 001:124 JLINK_WriteReg(R2, 0x000000FF)  returns 0x00 (0000ms, 0796ms total)
+T110C 001:124 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0796ms total)
+T110C 001:124 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0796ms total)
+T110C 001:124 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0796ms total)
+T110C 001:124 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0796ms total)
+T110C 001:124 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0796ms total)
+T110C 001:124 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0001ms, 0797ms total)
+T110C 001:125 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0797ms total)
+T110C 001:125 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0797ms total)
+T110C 001:125 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0797ms total)
+T110C 001:125 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0797ms total)
+T110C 001:125 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0797ms total)
+T110C 001:125 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0797ms total)
+T110C 001:125 JLINK_WriteReg(R15 (PC), 0x20000020)  returns 0x00 (0000ms, 0797ms total)
+T110C 001:125 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0797ms total)
+T110C 001:125 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0797ms total)
+T110C 001:125 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0797ms total)
+T110C 001:125 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0001ms, 0798ms total)
+T110C 001:126 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000005 (0000ms, 0798ms total)
+T110C 001:126 JLINK_Go() (0003ms, 0801ms total)
+T110C 001:129 JLINK_IsHalted()  returns FALSE (0001ms, 0802ms total)
+T110C 001:132 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0007ms, 0808ms total)
+T110C 001:139 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0801ms total)
+T110C 001:139 JLINK_ClrBPEx(BPHandle = 0x00000005)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:139 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R0, 0x08002000)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R1, 0x00000800)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R2, 0x000000FF)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(R15 (PC), 0x20000020)  returns 0x00 (0000ms, 0801ms total)
+T110C 001:140 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0001ms, 0802ms total)
+T110C 001:141 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0802ms total)
+T110C 001:141 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0802ms total)
+T110C 001:141 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0802ms total)
+T110C 001:141 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000006 (0000ms, 0802ms total)
+T110C 001:141 JLINK_Go() (0003ms, 0805ms total)
+T110C 001:144 JLINK_IsHalted()  returns FALSE (0002ms, 0807ms total)
+T110C 001:148 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0811ms total)
+T110C 001:154 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0805ms total)
+T110C 001:155 JLINK_ClrBPEx(BPHandle = 0x00000006)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:155 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R0, 0x08002800)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R1, 0x00000800)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R2, 0x000000FF)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0806ms total)
+T110C 001:156 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0001ms, 0807ms total)
+T110C 001:157 JLINK_WriteReg(R15 (PC), 0x20000020)  returns 0x00 (0000ms, 0807ms total)
+T110C 001:157 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0807ms total)
+T110C 001:157 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0807ms total)
+T110C 001:157 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0807ms total)
+T110C 001:157 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0807ms total)
+T110C 001:157 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000007 (0000ms, 0807ms total)
+T110C 001:157 JLINK_Go() (0003ms, 0810ms total)
+T110C 001:160 JLINK_IsHalted()  returns FALSE (0002ms, 0812ms total)
+T110C 001:164 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0816ms total)
+T110C 001:170 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0810ms total)
+T110C 001:170 JLINK_ClrBPEx(BPHandle = 0x00000007)  returns 0x00 (0000ms, 0810ms total)
+T110C 001:170 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0810ms total)
+T110C 001:171 JLINK_WriteReg(R0, 0x08003000)  returns 0x00 (0000ms, 0810ms total)
+T110C 001:171 JLINK_WriteReg(R1, 0x00000800)  returns 0x00 (0000ms, 0810ms total)
+T110C 001:171 JLINK_WriteReg(R2, 0x000000FF)  returns 0x00 (0000ms, 0810ms total)
+T110C 001:171 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0810ms total)
+T110C 001:171 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0001ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(R15 (PC), 0x20000020)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0811ms total)
+T110C 001:172 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000008 (0000ms, 0811ms total)
+T110C 001:172 JLINK_Go() (0003ms, 0814ms total)
+T110C 001:175 JLINK_IsHalted()  returns FALSE (0002ms, 0816ms total)
+T110C 001:202 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0820ms total)
+T110C 001:208 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0814ms total)
+T110C 001:208 JLINK_ClrBPEx(BPHandle = 0x00000008)  returns 0x00 (0000ms, 0814ms total)
+T110C 001:208 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0814ms total)
+T110C 001:209 JLINK_WriteReg(R0, 0x08003800)  returns 0x00 (0001ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R1, 0x00000800)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R2, 0x000000FF)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0816ms total)
+T110C 001:210 JLINK_WriteReg(R15 (PC), 0x20000020)  returns 0x00 (0001ms, 0817ms total)
+T110C 001:211 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0817ms total)
+T110C 001:211 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0817ms total)
+T110C 001:211 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0817ms total)
+T110C 001:211 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0817ms total)
+T110C 001:211 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000009 (0000ms, 0817ms total)
+T110C 001:211 JLINK_Go() (0003ms, 0820ms total)
+T110C 001:214 JLINK_IsHalted()  returns FALSE (0002ms, 0822ms total)
+T110C 001:218 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0826ms total)
+T110C 001:224 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0820ms total)
+T110C 001:224 JLINK_ClrBPEx(BPHandle = 0x00000009)  returns 0x00 (0000ms, 0820ms total)
+T110C 001:224 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0820ms total)
+T110C 001:225 JLINK_WriteReg(R0, 0x08004000)  returns 0x00 (0000ms, 0820ms total)
+T110C 001:225 JLINK_WriteReg(R1, 0x00000800)  returns 0x00 (0000ms, 0820ms total)
+T110C 001:225 JLINK_WriteReg(R2, 0x000000FF)  returns 0x00 (0000ms, 0820ms total)
+T110C 001:225 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0820ms total)
+T110C 001:225 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0820ms total)
+T110C 001:225 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0820ms total)
+T110C 001:225 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0820ms total)
+T110C 001:225 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0820ms total)
+T110C 001:225 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0820ms total)
+T110C 001:225 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0820ms total)
+T110C 001:225 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0820ms total)
+T110C 001:225 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0001ms, 0821ms total)
+T110C 001:226 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0821ms total)
+T110C 001:226 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0821ms total)
+T110C 001:226 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0821ms total)
+T110C 001:226 JLINK_WriteReg(R15 (PC), 0x20000020)  returns 0x00 (0000ms, 0821ms total)
+T110C 001:226 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0821ms total)
+T110C 001:226 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0821ms total)
+T110C 001:226 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0821ms total)
+T110C 001:226 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0821ms total)
+T110C 001:226 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x0000000A (0000ms, 0821ms total)
+T110C 001:226 JLINK_Go() (0003ms, 0824ms total)
+T110C 001:229 JLINK_IsHalted()  returns FALSE (0002ms, 0826ms total)
+T110C 001:233 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0830ms total)
+T110C 001:239 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0824ms total)
+T110C 001:239 JLINK_ClrBPEx(BPHandle = 0x0000000A)  returns 0x00 (0000ms, 0824ms total)
+T110C 001:239 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0824ms total)
+T110C 001:240 JLINK_WriteReg(R0, 0x08004800)  returns 0x00 (0000ms, 0824ms total)
+T110C 001:240 JLINK_WriteReg(R1, 0x00000800)  returns 0x00 (0000ms, 0824ms total)
+T110C 001:240 JLINK_WriteReg(R2, 0x000000FF)  returns 0x00 (0000ms, 0824ms total)
+T110C 001:240 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0824ms total)
+T110C 001:240 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0824ms total)
+T110C 001:240 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0824ms total)
+T110C 001:240 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0824ms total)
+T110C 001:240 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0824ms total)
+T110C 001:240 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0824ms total)
+T110C 001:240 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0824ms total)
+T110C 001:240 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0824ms total)
+T110C 001:240 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0001ms, 0825ms total)
+T110C 001:241 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0825ms total)
+T110C 001:241 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0825ms total)
+T110C 001:241 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0825ms total)
+T110C 001:241 JLINK_WriteReg(R15 (PC), 0x20000020)  returns 0x00 (0000ms, 0825ms total)
+T110C 001:241 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0825ms total)
+T110C 001:241 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0825ms total)
+T110C 001:241 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0825ms total)
+T110C 001:241 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0825ms total)
+T110C 001:241 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x0000000B (0000ms, 0825ms total)
+T110C 001:241 JLINK_Go() (0003ms, 0828ms total)
+T110C 001:244 JLINK_IsHalted()  returns FALSE (0002ms, 0830ms total)
+T110C 001:248 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0834ms total)
+T110C 001:254 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0828ms total)
+T110C 001:254 JLINK_ClrBPEx(BPHandle = 0x0000000B)  returns 0x00 (0000ms, 0828ms total)
+T110C 001:254 JLINK_ReadReg(R0)  returns 0x00000000 (0001ms, 0829ms total)
+T110C 001:255 JLINK_WriteReg(R0, 0x08005000)  returns 0x00 (0000ms, 0829ms total)
+T110C 001:255 JLINK_WriteReg(R1, 0x00000800)  returns 0x00 (0000ms, 0829ms total)
+T110C 001:255 JLINK_WriteReg(R2, 0x000000FF)  returns 0x00 (0000ms, 0829ms total)
+T110C 001:255 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0001ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(R15 (PC), 0x20000020)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0830ms total)
+T110C 001:256 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x0000000C (0000ms, 0830ms total)
+T110C 001:256 JLINK_Go() (0004ms, 0834ms total)
+T110C 001:260 JLINK_IsHalted()  returns FALSE (0001ms, 0835ms total)
+T110C 001:265 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0840ms total)
+T110C 001:272 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0834ms total)
+T110C 001:272 JLINK_ClrBPEx(BPHandle = 0x0000000C)  returns 0x00 (0000ms, 0834ms total)
+T110C 001:272 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0834ms total)
+T110C 001:272 JLINK_WriteReg(R0, 0x00000001)  returns 0x00 (0000ms, 0834ms total)
+T110C 001:272 JLINK_WriteReg(R1, 0x00000800)  returns 0x00 (0000ms, 0834ms total)
+T110C 001:272 JLINK_WriteReg(R2, 0x000000FF)  returns 0x00 (0000ms, 0834ms total)
+T110C 001:272 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0834ms total)
+T110C 001:272 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0001ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(R15 (PC), 0x2000006A)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0835ms total)
+T110C 001:273 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x0000000D (0000ms, 0835ms total)
+T110C 001:273 JLINK_Go() (0004ms, 0839ms total)
+T110C 001:277 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0007ms, 0846ms total)
+T110C 001:284 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0839ms total)
+T110C 001:284 JLINK_ClrBPEx(BPHandle = 0x0000000D)  returns 0x00 (0000ms, 0839ms total)
+T110C 001:284 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0839ms total)
+T110C 001:343 JLINK_WriteMem(0x20000000, 0x0164 Bytes, ...) - Data: 00 BE 0A E0 0D 78 2D 06 68 40 08 24 40 00 00 D3 ... -- CPU_WriteMem(356 bytes @ 0x20000000)  returns 0x164 (0006ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R0, 0x08000000)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R1, 0x00B71B00)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R2, 0x00000002)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0845ms total)
+T110C 001:349 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0001ms, 0846ms total)
+T110C 001:350 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0846ms total)
+T110C 001:350 JLINK_WriteReg(R15 (PC), 0x20000038)  returns 0x00 (0000ms, 0846ms total)
+T110C 001:350 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0846ms total)
+T110C 001:350 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0846ms total)
+T110C 001:350 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0846ms total)
+T110C 001:350 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0846ms total)
+T110C 001:350 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2) -- CPU_ReadMem(2 bytes @ 0x20000000)  returns 0x0000000E (0002ms, 0848ms total)
+T110C 001:352 JLINK_Go() -- CPU_WriteMem(2 bytes @ 0x20000000) (0005ms, 0853ms total)
+T110C 001:357 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0859ms total)
+T110C 001:363 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0853ms total)
+T110C 001:363 JLINK_ClrBPEx(BPHandle = 0x0000000E)  returns 0x00 (0000ms, 0853ms total)
+T110C 001:363 JLINK_ReadReg(R0)  returns 0x00000000 (0001ms, 0854ms total)
+T110C 001:364 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: F0 08 00 20 25 02 00 08 FD 30 00 08 FF 30 00 08 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0013ms, 0867ms total)
+T110C 001:377 JLINK_WriteReg(R0, 0x08000000)  returns 0x00 (0000ms, 0867ms total)
+T110C 001:377 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 0867ms total)
+T110C 001:377 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 0867ms total)
+T110C 001:377 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0867ms total)
+T110C 001:377 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0867ms total)
+T110C 001:377 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0867ms total)
+T110C 001:377 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0867ms total)
+T110C 001:377 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0867ms total)
+T110C 001:378 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0868ms total)
+T110C 001:378 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0868ms total)
+T110C 001:378 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0868ms total)
+T110C 001:378 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0868ms total)
+T110C 001:378 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0868ms total)
+T110C 001:378 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0868ms total)
+T110C 001:378 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0868ms total)
+T110C 001:378 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 0868ms total)
+T110C 001:378 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0868ms total)
+T110C 001:378 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0868ms total)
+T110C 001:378 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0868ms total)
+T110C 001:378 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0868ms total)
+T110C 001:378 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x0000000F (0000ms, 0868ms total)
+T110C 001:378 JLINK_Go() (0004ms, 0872ms total)
+T110C 001:382 JLINK_IsHalted()  returns FALSE (0001ms, 0873ms total)
+T110C 001:416 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0878ms total)
+T110C 001:422 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0872ms total)
+T110C 001:422 JLINK_ClrBPEx(BPHandle = 0x0000000F)  returns 0x00 (0000ms, 0872ms total)
+T110C 001:422 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0872ms total)
+T110C 001:423 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 23 60 00 BF 00 BF 06 4B 5B 68 C3 F3 03 13 0C 4C ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0014ms, 0886ms total)
+T110C 001:437 JLINK_WriteReg(R0, 0x08000400)  returns 0x00 (0000ms, 0886ms total)
+T110C 001:437 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 0886ms total)
+T110C 001:437 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 0886ms total)
+T110C 001:437 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0886ms total)
+T110C 001:437 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0886ms total)
+T110C 001:437 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0886ms total)
+T110C 001:437 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0886ms total)
+T110C 001:437 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0886ms total)
+T110C 001:437 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0886ms total)
+T110C 001:437 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0886ms total)
+T110C 001:438 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0887ms total)
+T110C 001:438 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0887ms total)
+T110C 001:438 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0887ms total)
+T110C 001:438 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0887ms total)
+T110C 001:438 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0887ms total)
+T110C 001:438 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 0887ms total)
+T110C 001:438 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0887ms total)
+T110C 001:438 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0887ms total)
+T110C 001:438 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0887ms total)
+T110C 001:438 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0887ms total)
+T110C 001:438 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000010 (0000ms, 0887ms total)
+T110C 001:438 JLINK_Go() (0003ms, 0890ms total)
+T110C 001:442 JLINK_IsHalted()  returns FALSE (0001ms, 0892ms total)
+T110C 001:445 JLINK_IsHalted()  returns FALSE (0001ms, 0892ms total)
+T110C 001:449 JLINK_IsHalted()  returns FALSE (0001ms, 0892ms total)
+T110C 001:452 JLINK_IsHalted()  returns FALSE (0001ms, 0892ms total)
+T110C 001:455 JLINK_IsHalted()  returns FALSE (0001ms, 0892ms total)
+T110C 001:458 JLINK_IsHalted()  returns FALSE (0001ms, 0892ms total)
+T110C 001:461 JLINK_IsHalted()  returns FALSE (0001ms, 0892ms total)
+T110C 001:466 JLINK_IsHalted()  returns FALSE (0001ms, 0892ms total)
+T110C 001:469 JLINK_IsHalted()  returns FALSE (0001ms, 0892ms total)
+T110C 001:472 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0897ms total)
+T110C 001:478 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0891ms total)
+T110C 001:478 JLINK_ClrBPEx(BPHandle = 0x00000010)  returns 0x00 (0000ms, 0891ms total)
+T110C 001:478 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0891ms total)
+T110C 001:479 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 1C 4E F1 61 01 E0 1B 4E 71 60 F0 BD 30 B5 00 22 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0013ms, 0904ms total)
+T110C 001:492 JLINK_WriteReg(R0, 0x08000800)  returns 0x00 (0000ms, 0904ms total)
+T110C 001:492 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0001ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0905ms total)
+T110C 001:493 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000011 (0000ms, 0905ms total)
+T110C 001:493 JLINK_Go() (0003ms, 0908ms total)
+T110C 001:497 JLINK_IsHalted()  returns FALSE (0001ms, 0909ms total)
+T110C 001:507 JLINK_IsHalted()  returns FALSE (0001ms, 0909ms total)
+T110C 001:510 JLINK_IsHalted()  returns FALSE (0001ms, 0909ms total)
+T110C 001:527 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0914ms total)
+T110C 001:533 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0908ms total)
+T110C 001:533 JLINK_ClrBPEx(BPHandle = 0x00000011)  returns 0x00 (0000ms, 0908ms total)
+T110C 001:533 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0908ms total)
+T110C 001:534 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 00 00 FF F8 FF FF F6 FE 00 00 42 42 80 04 42 42 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0013ms, 0921ms total)
+T110C 001:547 JLINK_WriteReg(R0, 0x08000C00)  returns 0x00 (0000ms, 0921ms total)
+T110C 001:547 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 0921ms total)
+T110C 001:547 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 0921ms total)
+T110C 001:547 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0921ms total)
+T110C 001:547 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0001ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0922ms total)
+T110C 001:548 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000012 (0000ms, 0922ms total)
+T110C 001:548 JLINK_Go() (0003ms, 0925ms total)
+T110C 001:551 JLINK_IsHalted()  returns FALSE (0002ms, 0927ms total)
+T110C 001:555 JLINK_IsHalted()  returns FALSE (0001ms, 0926ms total)
+T110C 001:558 JLINK_IsHalted()  returns FALSE (0001ms, 0926ms total)
+T110C 001:561 JLINK_IsHalted()  returns FALSE (0001ms, 0926ms total)
+T110C 001:564 JLINK_IsHalted()  returns FALSE (0001ms, 0926ms total)
+T110C 001:567 JLINK_IsHalted()  returns FALSE (0001ms, 0926ms total)
+T110C 001:570 JLINK_IsHalted()  returns FALSE (0001ms, 0926ms total)
+T110C 001:573 JLINK_IsHalted()  returns FALSE (0001ms, 0926ms total)
+T110C 001:576 JLINK_IsHalted()  returns FALSE (0001ms, 0926ms total)
+T110C 001:579 JLINK_IsHalted()  returns FALSE (0001ms, 0926ms total)
+T110C 001:582 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0931ms total)
+T110C 001:589 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0925ms total)
+T110C 001:589 JLINK_ClrBPEx(BPHandle = 0x00000012)  returns 0x00 (0000ms, 0925ms total)
+T110C 001:589 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0925ms total)
+T110C 001:589 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 4E F6 FF 76 35 40 05 84 03 8C 84 88 82 8B 48 F6 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0014ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R0, 0x08001000)  returns 0x00 (0000ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0939ms total)
+T110C 001:603 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0001ms, 0940ms total)
+T110C 001:604 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0940ms total)
+T110C 001:604 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0940ms total)
+T110C 001:604 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 0940ms total)
+T110C 001:604 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0940ms total)
+T110C 001:604 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0940ms total)
+T110C 001:604 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0940ms total)
+T110C 001:604 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0940ms total)
+T110C 001:604 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000013 (0000ms, 0940ms total)
+T110C 001:604 JLINK_Go() (0003ms, 0943ms total)
+T110C 001:607 JLINK_IsHalted()  returns FALSE (0002ms, 0945ms total)
+T110C 001:617 JLINK_IsHalted()  returns FALSE (0001ms, 0944ms total)
+T110C 001:632 JLINK_IsHalted()  returns FALSE (0001ms, 0944ms total)
+T110C 001:635 JLINK_IsHalted()  returns FALSE (0001ms, 0944ms total)
+T110C 001:638 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0949ms total)
+T110C 001:644 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0943ms total)
+T110C 001:644 JLINK_ClrBPEx(BPHandle = 0x00000013)  returns 0x00 (0000ms, 0943ms total)
+T110C 001:644 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0943ms total)
+T110C 001:645 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 0A 88 4B 88 1A 43 8B 88 1A 43 CB 88 1A 43 0B 89 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0013ms, 0956ms total)
+T110C 001:658 JLINK_WriteReg(R0, 0x08001400)  returns 0x00 (0000ms, 0956ms total)
+T110C 001:658 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0001ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0957ms total)
+T110C 001:659 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000014 (0000ms, 0957ms total)
+T110C 001:659 JLINK_Go() (0004ms, 0961ms total)
+T110C 001:663 JLINK_IsHalted()  returns FALSE (0002ms, 0963ms total)
+T110C 001:667 JLINK_IsHalted()  returns FALSE (0001ms, 0962ms total)
+T110C 001:670 JLINK_IsHalted()  returns FALSE (0001ms, 0962ms total)
+T110C 001:673 JLINK_IsHalted()  returns FALSE (0001ms, 0962ms total)
+T110C 001:676 JLINK_IsHalted()  returns FALSE (0001ms, 0962ms total)
+T110C 001:679 JLINK_IsHalted()  returns FALSE (0001ms, 0962ms total)
+T110C 001:682 JLINK_IsHalted()  returns FALSE (0001ms, 0962ms total)
+T110C 001:686 JLINK_IsHalted()  returns FALSE (0001ms, 0962ms total)
+T110C 001:689 JLINK_IsHalted()  returns FALSE (0001ms, 0962ms total)
+T110C 001:692 JLINK_IsHalted()  returns FALSE (0001ms, 0962ms total)
+T110C 001:695 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0967ms total)
+T110C 001:701 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0961ms total)
+T110C 001:701 JLINK_ClrBPEx(BPHandle = 0x00000014)  returns 0x00 (0001ms, 0962ms total)
+T110C 001:702 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0962ms total)
+T110C 001:702 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 19 40 11 43 01 84 70 47 0A 46 00 21 01 8C 4F F6 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0014ms, 0976ms total)
+T110C 001:716 JLINK_WriteReg(R0, 0x08001800)  returns 0x00 (0000ms, 0976ms total)
+T110C 001:716 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 0976ms total)
+T110C 001:716 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 0976ms total)
+T110C 001:716 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0976ms total)
+T110C 001:716 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 0976ms total)
+T110C 001:716 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0976ms total)
+T110C 001:716 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0976ms total)
+T110C 001:716 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0976ms total)
+T110C 001:716 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0976ms total)
+T110C 001:716 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0976ms total)
+T110C 001:716 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0976ms total)
+T110C 001:716 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0001ms, 0977ms total)
+T110C 001:717 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0977ms total)
+T110C 001:717 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0977ms total)
+T110C 001:717 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0977ms total)
+T110C 001:717 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 0977ms total)
+T110C 001:717 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0977ms total)
+T110C 001:717 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0977ms total)
+T110C 001:717 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0977ms total)
+T110C 001:717 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0977ms total)
+T110C 001:717 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000015 (0000ms, 0977ms total)
+T110C 001:717 JLINK_Go() (0004ms, 0981ms total)
+T110C 001:721 JLINK_IsHalted()  returns FALSE (0002ms, 0983ms total)
+T110C 001:742 JLINK_IsHalted()  returns FALSE (0001ms, 0982ms total)
+T110C 001:745 JLINK_IsHalted()  returns FALSE (0001ms, 0982ms total)
+T110C 001:748 JLINK_IsHalted()  returns FALSE (0001ms, 0982ms total)
+T110C 001:751 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 0987ms total)
+T110C 001:757 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0981ms total)
+T110C 001:757 JLINK_ClrBPEx(BPHandle = 0x00000015)  returns 0x00 (0000ms, 0981ms total)
+T110C 001:757 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 0981ms total)
+T110C 001:758 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 6A 17 B9 42 00 D1 00 BF 18 46 C1 F3 42 14 01 F0 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0013ms, 0994ms total)
+T110C 001:771 JLINK_WriteReg(R0, 0x08001C00)  returns 0x00 (0000ms, 0994ms total)
+T110C 001:771 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 0994ms total)
+T110C 001:771 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 0994ms total)
+T110C 001:771 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 0994ms total)
+T110C 001:771 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0001ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 0995ms total)
+T110C 001:772 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000016 (0000ms, 0995ms total)
+T110C 001:772 JLINK_Go() (0003ms, 0998ms total)
+T110C 001:775 JLINK_IsHalted()  returns FALSE (0002ms, 1000ms total)
+T110C 001:782 JLINK_IsHalted()  returns FALSE (0001ms, 0999ms total)
+T110C 001:785 JLINK_IsHalted()  returns FALSE (0001ms, 0999ms total)
+T110C 001:788 JLINK_IsHalted()  returns FALSE (0001ms, 0999ms total)
+T110C 001:791 JLINK_IsHalted()  returns FALSE (0001ms, 0999ms total)
+T110C 001:794 JLINK_IsHalted()  returns FALSE (0001ms, 0999ms total)
+T110C 001:797 JLINK_IsHalted()  returns FALSE (0001ms, 0999ms total)
+T110C 001:800 JLINK_IsHalted()  returns FALSE (0001ms, 0999ms total)
+T110C 001:804 JLINK_IsHalted()  returns FALSE (0001ms, 0999ms total)
+T110C 001:807 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 1004ms total)
+T110C 001:813 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 0998ms total)
+T110C 001:813 JLINK_ClrBPEx(BPHandle = 0x00000016)  returns 0x00 (0000ms, 0998ms total)
+T110C 001:813 JLINK_ReadReg(R0)  returns 0x00000000 (0001ms, 0999ms total)
+T110C 001:814 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 46 48 FE F7 ED FA 01 94 00 20 AD F8 08 00 AD F8 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0014ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R0, 0x08002000)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1013ms total)
+T110C 001:828 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0001ms, 1014ms total)
+T110C 001:829 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1014ms total)
+T110C 001:829 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 1014ms total)
+T110C 001:829 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1014ms total)
+T110C 001:829 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1014ms total)
+T110C 001:829 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1014ms total)
+T110C 001:829 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1014ms total)
+T110C 001:829 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000017 (0000ms, 1014ms total)
+T110C 001:829 JLINK_Go() (0004ms, 1018ms total)
+T110C 001:833 JLINK_IsHalted()  returns FALSE (0001ms, 1019ms total)
+T110C 001:855 JLINK_IsHalted()  returns FALSE (0001ms, 1019ms total)
+T110C 001:860 JLINK_IsHalted()  returns FALSE (0001ms, 1019ms total)
+T110C 001:863 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 1024ms total)
+T110C 001:869 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1018ms total)
+T110C 001:869 JLINK_ClrBPEx(BPHandle = 0x00000017)  returns 0x00 (0000ms, 1018ms total)
+T110C 001:869 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1018ms total)
+T110C 001:870 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: FE F7 B7 FB 68 1E 80 B2 AD F8 08 00 A0 B2 AD F8 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0014ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R0, 0x08002400)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1032ms total)
+T110C 001:884 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0001ms, 1033ms total)
+T110C 001:885 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 1033ms total)
+T110C 001:885 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1033ms total)
+T110C 001:885 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1033ms total)
+T110C 001:885 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1033ms total)
+T110C 001:885 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1033ms total)
+T110C 001:885 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000018 (0000ms, 1033ms total)
+T110C 001:885 JLINK_Go() (0004ms, 1037ms total)
+T110C 001:889 JLINK_IsHalted()  returns FALSE (0001ms, 1038ms total)
+T110C 001:892 JLINK_IsHalted()  returns FALSE (0001ms, 1038ms total)
+T110C 001:895 JLINK_IsHalted()  returns FALSE (0001ms, 1038ms total)
+T110C 001:899 JLINK_IsHalted()  returns FALSE (0001ms, 1038ms total)
+T110C 001:902 JLINK_IsHalted()  returns FALSE (0001ms, 1038ms total)
+T110C 001:905 JLINK_IsHalted()  returns FALSE (0001ms, 1038ms total)
+T110C 001:908 JLINK_IsHalted()  returns FALSE (0001ms, 1038ms total)
+T110C 001:912 JLINK_IsHalted()  returns FALSE (0001ms, 1038ms total)
+T110C 001:915 JLINK_IsHalted()  returns FALSE (0001ms, 1038ms total)
+T110C 001:918 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0008ms, 1045ms total)
+T110C 001:926 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1037ms total)
+T110C 001:926 JLINK_ClrBPEx(BPHandle = 0x00000018)  returns 0x00 (0000ms, 1037ms total)
+T110C 001:926 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1037ms total)
+T110C 001:927 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: CF FF 10 BD 10 B5 01 20 FF F7 A8 FF 00 20 FF F7 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0014ms, 1051ms total)
+T110C 001:941 JLINK_WriteReg(R0, 0x08002800)  returns 0x00 (0000ms, 1051ms total)
+T110C 001:941 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 1051ms total)
+T110C 001:941 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1051ms total)
+T110C 001:941 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1051ms total)
+T110C 001:941 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1051ms total)
+T110C 001:942 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1052ms total)
+T110C 001:942 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1052ms total)
+T110C 001:942 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1052ms total)
+T110C 001:942 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1052ms total)
+T110C 001:942 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1052ms total)
+T110C 001:942 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1052ms total)
+T110C 001:942 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1052ms total)
+T110C 001:942 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0001ms, 1053ms total)
+T110C 001:943 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1053ms total)
+T110C 001:943 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1053ms total)
+T110C 001:943 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 1053ms total)
+T110C 001:943 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1053ms total)
+T110C 001:943 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1053ms total)
+T110C 001:943 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1053ms total)
+T110C 001:943 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0001ms, 1054ms total)
+T110C 001:944 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000019 (0000ms, 1054ms total)
+T110C 001:944 JLINK_Go() (0003ms, 1057ms total)
+T110C 001:947 JLINK_IsHalted()  returns FALSE (0002ms, 1059ms total)
+T110C 001:993 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0008ms, 1065ms total)
+T110C 002:001 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1057ms total)
+T110C 002:001 JLINK_ClrBPEx(BPHandle = 0x00000019)  returns 0x00 (0000ms, 1057ms total)
+T110C 002:001 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1057ms total)
+T110C 002:002 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: C9 10 49 1C CD B2 3D 46 15 E0 29 46 30 46 FF F7 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0013ms, 1070ms total)
+T110C 002:015 JLINK_WriteReg(R0, 0x08002C00)  returns 0x00 (0000ms, 1070ms total)
+T110C 002:015 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 1070ms total)
+T110C 002:016 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:016 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:017 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:017 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:017 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1071ms total)
+T110C 002:017 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x0000001A (0000ms, 1071ms total)
+T110C 002:017 JLINK_Go() (0003ms, 1074ms total)
+T110C 002:020 JLINK_IsHalted()  returns FALSE (0002ms, 1076ms total)
+T110C 002:023 JLINK_IsHalted()  returns FALSE (0002ms, 1076ms total)
+T110C 002:027 JLINK_IsHalted()  returns FALSE (0002ms, 1076ms total)
+T110C 002:031 JLINK_IsHalted()  returns FALSE (0001ms, 1075ms total)
+T110C 002:034 JLINK_IsHalted()  returns FALSE (0001ms, 1075ms total)
+T110C 002:037 JLINK_IsHalted()  returns FALSE (0001ms, 1075ms total)
+T110C 002:040 JLINK_IsHalted()  returns FALSE (0001ms, 1075ms total)
+T110C 002:052 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 1080ms total)
+T110C 002:058 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0001ms, 1075ms total)
+T110C 002:059 JLINK_ClrBPEx(BPHandle = 0x0000001A)  returns 0x00 (0000ms, 1075ms total)
+T110C 002:059 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1075ms total)
+T110C 002:061 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 36 48 00 68 40 F6 AC 51 88 42 03 DD 40 F6 B8 30 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0014ms, 1089ms total)
+T110C 002:075 JLINK_WriteReg(R0, 0x08003000)  returns 0x00 (0001ms, 1090ms total)
+T110C 002:076 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0001ms, 1091ms total)
+T110C 002:077 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1091ms total)
+T110C 002:077 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1091ms total)
+T110C 002:077 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1091ms total)
+T110C 002:077 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1091ms total)
+T110C 002:077 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1091ms total)
+T110C 002:077 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0001ms, 1092ms total)
+T110C 002:078 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1092ms total)
+T110C 002:078 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1092ms total)
+T110C 002:078 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1092ms total)
+T110C 002:078 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1092ms total)
+T110C 002:078 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1092ms total)
+T110C 002:078 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1092ms total)
+T110C 002:078 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1092ms total)
+T110C 002:078 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 1092ms total)
+T110C 002:078 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0001ms, 1093ms total)
+T110C 002:079 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1093ms total)
+T110C 002:079 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1093ms total)
+T110C 002:079 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1093ms total)
+T110C 002:079 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x0000001B (0000ms, 1093ms total)
+T110C 002:079 JLINK_Go() (0004ms, 1097ms total)
+T110C 002:083 JLINK_IsHalted()  returns FALSE (0002ms, 1099ms total)
+T110C 002:117 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 1103ms total)
+T110C 002:123 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1097ms total)
+T110C 002:123 JLINK_ClrBPEx(BPHandle = 0x0000001B)  returns 0x00 (0000ms, 1097ms total)
+T110C 002:123 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1097ms total)
+T110C 002:124 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 6D 1C 50 EA 01 02 F5 D1 08 43 02 D0 00 98 C8 B1 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0013ms, 1110ms total)
+T110C 002:137 JLINK_WriteReg(R0, 0x08003400)  returns 0x00 (0000ms, 1110ms total)
+T110C 002:137 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0001ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1111ms total)
+T110C 002:138 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0001ms, 1112ms total)
+T110C 002:139 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x0000001C (0000ms, 1112ms total)
+T110C 002:139 JLINK_Go() (0003ms, 1115ms total)
+T110C 002:142 JLINK_IsHalted()  returns FALSE (0002ms, 1117ms total)
+T110C 002:146 JLINK_IsHalted()  returns FALSE (0001ms, 1116ms total)
+T110C 002:149 JLINK_IsHalted()  returns FALSE (0001ms, 1116ms total)
+T110C 002:152 JLINK_IsHalted()  returns FALSE (0001ms, 1116ms total)
+T110C 002:162 JLINK_IsHalted()  returns FALSE (0001ms, 1116ms total)
+T110C 002:165 JLINK_IsHalted()  returns FALSE (0001ms, 1116ms total)
+T110C 002:181 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0008ms, 1123ms total)
+T110C 002:189 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1115ms total)
+T110C 002:189 JLINK_ClrBPEx(BPHandle = 0x0000001C)  returns 0x00 (0000ms, 1115ms total)
+T110C 002:189 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1115ms total)
+T110C 002:189 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 49 4E 46 00 69 6E 66 00 2D E9 F0 47 81 46 16 46 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0014ms, 1129ms total)
+T110C 002:203 JLINK_WriteReg(R0, 0x08003800)  returns 0x00 (0000ms, 1129ms total)
+T110C 002:203 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 1129ms total)
+T110C 002:203 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1129ms total)
+T110C 002:203 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1129ms total)
+T110C 002:203 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1129ms total)
+T110C 002:203 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1129ms total)
+T110C 002:203 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1129ms total)
+T110C 002:203 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1129ms total)
+T110C 002:203 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1129ms total)
+T110C 002:203 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0001ms, 1130ms total)
+T110C 002:204 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1130ms total)
+T110C 002:204 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1130ms total)
+T110C 002:204 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1130ms total)
+T110C 002:204 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1130ms total)
+T110C 002:204 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1130ms total)
+T110C 002:204 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 1130ms total)
+T110C 002:204 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1130ms total)
+T110C 002:204 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1130ms total)
+T110C 002:204 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1130ms total)
+T110C 002:204 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1130ms total)
+T110C 002:204 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x0000001D (0000ms, 1130ms total)
+T110C 002:204 JLINK_Go() (0004ms, 1134ms total)
+T110C 002:208 JLINK_IsHalted()  returns FALSE (0002ms, 1136ms total)
+T110C 002:212 JLINK_IsHalted()  returns FALSE (0001ms, 1135ms total)
+T110C 002:215 JLINK_IsHalted()  returns FALSE (0001ms, 1135ms total)
+T110C 002:218 JLINK_IsHalted()  returns FALSE (0001ms, 1135ms total)
+T110C 002:221 JLINK_IsHalted()  returns FALSE (0001ms, 1135ms total)
+T110C 002:224 JLINK_IsHalted()  returns FALSE (0001ms, 1135ms total)
+T110C 002:227 JLINK_IsHalted()  returns FALSE (0002ms, 1136ms total)
+T110C 002:231 JLINK_IsHalted()  returns FALSE (0001ms, 1135ms total)
+T110C 002:234 JLINK_IsHalted()  returns FALSE (0001ms, 1135ms total)
+T110C 002:237 JLINK_IsHalted()  returns FALSE (0001ms, 1135ms total)
+T110C 002:240 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0007ms, 1141ms total)
+T110C 002:247 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1134ms total)
+T110C 002:247 JLINK_ClrBPEx(BPHandle = 0x0000001D)  returns 0x00 (0000ms, 1134ms total)
+T110C 002:247 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1134ms total)
+T110C 002:249 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 34 BF A2 EB 07 42 B2 EB 07 42 61 EB 17 41 4F EA ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0014ms, 1148ms total)
+T110C 002:263 JLINK_WriteReg(R0, 0x08003C00)  returns 0x00 (0000ms, 1148ms total)
+T110C 002:263 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 1148ms total)
+T110C 002:263 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1148ms total)
+T110C 002:263 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1148ms total)
+T110C 002:263 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1148ms total)
+T110C 002:263 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1148ms total)
+T110C 002:263 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1148ms total)
+T110C 002:263 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0001ms, 1149ms total)
+T110C 002:264 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1149ms total)
+T110C 002:264 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1149ms total)
+T110C 002:264 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1149ms total)
+T110C 002:264 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1149ms total)
+T110C 002:264 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1149ms total)
+T110C 002:264 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1149ms total)
+T110C 002:264 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1149ms total)
+T110C 002:264 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0001ms, 1150ms total)
+T110C 002:265 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1150ms total)
+T110C 002:265 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1150ms total)
+T110C 002:265 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1150ms total)
+T110C 002:265 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1150ms total)
+T110C 002:265 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x0000001E (0000ms, 1150ms total)
+T110C 002:265 JLINK_Go() (0003ms, 1153ms total)
+T110C 002:268 JLINK_IsHalted()  returns FALSE (0002ms, 1155ms total)
+T110C 002:304 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0007ms, 1160ms total)
+T110C 002:311 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1153ms total)
+T110C 002:311 JLINK_ClrBPEx(BPHandle = 0x0000001E)  returns 0x00 (0000ms, 1153ms total)
+T110C 002:311 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1153ms total)
+T110C 002:312 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 02 02 41 41 46 EA 9E 06 01 D5 BD E8 01 89 B6 19 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0013ms, 1166ms total)
+T110C 002:325 JLINK_WriteReg(R0, 0x08004000)  returns 0x00 (0000ms, 1166ms total)
+T110C 002:325 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 1166ms total)
+T110C 002:325 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0001ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1167ms total)
+T110C 002:326 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x0000001F (0000ms, 1167ms total)
+T110C 002:327 JLINK_Go() (0003ms, 1171ms total)
+T110C 002:330 JLINK_IsHalted()  returns FALSE (0002ms, 1173ms total)
+T110C 002:334 JLINK_IsHalted()  returns FALSE (0001ms, 1172ms total)
+T110C 002:337 JLINK_IsHalted()  returns FALSE (0001ms, 1172ms total)
+T110C 002:340 JLINK_IsHalted()  returns FALSE (0001ms, 1172ms total)
+T110C 002:344 JLINK_IsHalted()  returns FALSE (0001ms, 1172ms total)
+T110C 002:347 JLINK_IsHalted()  returns FALSE (0001ms, 1172ms total)
+T110C 002:350 JLINK_IsHalted()  returns FALSE (0001ms, 1172ms total)
+T110C 002:355 JLINK_IsHalted()  returns FALSE (0001ms, 1172ms total)
+T110C 002:358 JLINK_IsHalted()  returns FALSE (0001ms, 1172ms total)
+T110C 002:361 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0005ms, 1176ms total)
+T110C 002:366 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1171ms total)
+T110C 002:366 JLINK_ClrBPEx(BPHandle = 0x0000001F)  returns 0x00 (0000ms, 1171ms total)
+T110C 002:366 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1171ms total)
+T110C 002:367 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 09 0B 02 02 4F F0 00 41 4F F0 00 00 A1 F5 00 21 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0014ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R0, 0x08004400)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1185ms total)
+T110C 002:381 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0001ms, 1186ms total)
+T110C 002:382 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1186ms total)
+T110C 002:382 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 1186ms total)
+T110C 002:382 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1186ms total)
+T110C 002:382 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1186ms total)
+T110C 002:382 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1186ms total)
+T110C 002:382 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1186ms total)
+T110C 002:382 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000020 (0000ms, 1186ms total)
+T110C 002:382 JLINK_Go() (0003ms, 1189ms total)
+T110C 002:386 JLINK_IsHalted()  returns FALSE (0001ms, 1191ms total)
+T110C 002:410 JLINK_IsHalted()  returns FALSE (0001ms, 1191ms total)
+T110C 002:413 JLINK_IsHalted()  returns FALSE (0001ms, 1191ms total)
+T110C 002:417 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 1196ms total)
+T110C 002:423 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1190ms total)
+T110C 002:423 JLINK_ClrBPEx(BPHandle = 0x00000020)  returns 0x00 (0000ms, 1190ms total)
+T110C 002:423 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1190ms total)
+T110C 002:424 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 93 EA 12 2F 04 BF 00 EB C2 50 70 47 4F EA C3 70 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0014ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R0, 0x08004800)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1204ms total)
+T110C 002:438 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0001ms, 1205ms total)
+T110C 002:439 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1205ms total)
+T110C 002:439 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000021 (0000ms, 1205ms total)
+T110C 002:439 JLINK_Go() (0003ms, 1208ms total)
+T110C 002:442 JLINK_IsHalted()  returns FALSE (0002ms, 1210ms total)
+T110C 002:446 JLINK_IsHalted()  returns FALSE (0001ms, 1209ms total)
+T110C 002:449 JLINK_IsHalted()  returns FALSE (0001ms, 1209ms total)
+T110C 002:452 JLINK_IsHalted()  returns FALSE (0001ms, 1209ms total)
+T110C 002:455 JLINK_IsHalted()  returns FALSE (0001ms, 1209ms total)
+T110C 002:458 JLINK_IsHalted()  returns FALSE (0001ms, 1209ms total)
+T110C 002:461 JLINK_IsHalted()  returns FALSE (0002ms, 1210ms total)
+T110C 002:465 JLINK_IsHalted()  returns FALSE (0001ms, 1209ms total)
+T110C 002:470 JLINK_IsHalted()  returns FALSE (0001ms, 1209ms total)
+T110C 002:473 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 1214ms total)
+T110C 002:479 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1208ms total)
+T110C 002:479 JLINK_ClrBPEx(BPHandle = 0x00000021)  returns 0x00 (0000ms, 1208ms total)
+T110C 002:479 JLINK_ReadReg(R0)  returns 0x00000000 (0001ms, 1209ms total)
+T110C 002:480 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: E0 00 00 00 31 22 22 11 0F 00 00 00 00 C0 C0 00 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0013ms, 1222ms total)
+T110C 002:493 JLINK_WriteReg(R0, 0x08004C00)  returns 0x00 (0000ms, 1222ms total)
+T110C 002:493 JLINK_WriteReg(R1, 0x00000400)  returns 0x00 (0000ms, 1222ms total)
+T110C 002:493 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1222ms total)
+T110C 002:493 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1222ms total)
+T110C 002:493 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1222ms total)
+T110C 002:493 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1222ms total)
+T110C 002:493 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1222ms total)
+T110C 002:493 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1222ms total)
+T110C 002:493 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1222ms total)
+T110C 002:493 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1222ms total)
+T110C 002:493 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1222ms total)
+T110C 002:494 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1223ms total)
+T110C 002:494 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1223ms total)
+T110C 002:494 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1223ms total)
+T110C 002:494 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1223ms total)
+T110C 002:494 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 1223ms total)
+T110C 002:494 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1223ms total)
+T110C 002:494 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1223ms total)
+T110C 002:494 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1223ms total)
+T110C 002:494 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1223ms total)
+T110C 002:494 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000022 (0000ms, 1223ms total)
+T110C 002:494 JLINK_Go() (0004ms, 1227ms total)
+T110C 002:498 JLINK_IsHalted()  returns FALSE (0001ms, 1228ms total)
+T110C 002:520 JLINK_IsHalted()  returns FALSE (0002ms, 1229ms total)
+T110C 002:524 JLINK_IsHalted()  returns FALSE (0001ms, 1228ms total)
+T110C 002:527 JLINK_IsHalted()  returns FALSE (0001ms, 1228ms total)
+T110C 002:530 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0005ms, 1232ms total)
+T110C 002:535 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1227ms total)
+T110C 002:535 JLINK_ClrBPEx(BPHandle = 0x00000022)  returns 0x00 (0000ms, 1227ms total)
+T110C 002:535 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1227ms total)
+T110C 002:536 JLINK_WriteMem(0x20000164, 0x0400 Bytes, ...) - Data: 80 80 80 81 8E 70 18 06 01 00 00 80 80 80 80 80 ... -- CPU_WriteMem(1024 bytes @ 0x20000164)  returns 0x400 (0014ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R0, 0x08005000)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R1, 0x00000230)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(R15 (PC), 0x200000F4)  returns 0x00 (0000ms, 1241ms total)
+T110C 002:550 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0001ms, 1242ms total)
+T110C 002:551 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1242ms total)
+T110C 002:551 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1242ms total)
+T110C 002:551 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1242ms total)
+T110C 002:551 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000023 (0000ms, 1242ms total)
+T110C 002:551 JLINK_Go() (0003ms, 1245ms total)
+T110C 002:554 JLINK_IsHalted()  returns FALSE (0002ms, 1247ms total)
+T110C 002:558 JLINK_IsHalted()  returns FALSE (0001ms, 1246ms total)
+T110C 002:561 JLINK_IsHalted()  returns FALSE (0002ms, 1247ms total)
+T110C 002:565 JLINK_IsHalted()  returns FALSE (0001ms, 1246ms total)
+T110C 002:568 JLINK_IsHalted()  returns FALSE (0001ms, 1246ms total)
+T110C 002:571 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0006ms, 1251ms total)
+T110C 002:577 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1245ms total)
+T110C 002:577 JLINK_ClrBPEx(BPHandle = 0x00000023)  returns 0x00 (0000ms, 1245ms total)
+T110C 002:577 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1245ms total)
+T110C 002:577 JLINK_WriteReg(R0, 0x00000002)  returns 0x00 (0000ms, 1245ms total)
+T110C 002:577 JLINK_WriteReg(R1, 0x00000230)  returns 0x00 (0000ms, 1245ms total)
+T110C 002:577 JLINK_WriteReg(R2, 0x20000164)  returns 0x00 (0000ms, 1245ms total)
+T110C 002:577 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1245ms total)
+T110C 002:577 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1245ms total)
+T110C 002:577 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1245ms total)
+T110C 002:578 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(R15 (PC), 0x2000006A)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1246ms total)
+T110C 002:578 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000024 (0001ms, 1247ms total)
+T110C 002:579 JLINK_Go() (0003ms, 1250ms total)
+T110C 002:582 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0007ms, 1257ms total)
+T110C 002:589 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1250ms total)
+T110C 002:589 JLINK_ClrBPEx(BPHandle = 0x00000024)  returns 0x00 (0000ms, 1250ms total)
+T110C 002:589 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1250ms total)
+T110C 002:647 JLINK_WriteMem(0x20000000, 0x0164 Bytes, ...) - Data: 00 BE 0A E0 0D 78 2D 06 68 40 08 24 40 00 00 D3 ... -- CPU_WriteMem(356 bytes @ 0x20000000)  returns 0x164 (0006ms, 1256ms total)
+T110C 002:653 JLINK_WriteReg(R0, 0x08000000)  returns 0x00 (0000ms, 1256ms total)
+T110C 002:653 JLINK_WriteReg(R1, 0x00B71B00)  returns 0x00 (0000ms, 1256ms total)
+T110C 002:653 JLINK_WriteReg(R2, 0x00000003)  returns 0x00 (0000ms, 1256ms total)
+T110C 002:653 JLINK_WriteReg(R3, 0x00000000)  returns 0x00 (0000ms, 1256ms total)
+T110C 002:653 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1256ms total)
+T110C 002:653 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0001ms, 1257ms total)
+T110C 002:654 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1257ms total)
+T110C 002:654 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1257ms total)
+T110C 002:654 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1257ms total)
+T110C 002:654 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1257ms total)
+T110C 002:654 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1257ms total)
+T110C 002:654 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1257ms total)
+T110C 002:654 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1257ms total)
+T110C 002:654 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1257ms total)
+T110C 002:654 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0001ms, 1258ms total)
+T110C 002:655 JLINK_WriteReg(R15 (PC), 0x20000038)  returns 0x00 (0000ms, 1258ms total)
+T110C 002:655 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1258ms total)
+T110C 002:655 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1258ms total)
+T110C 002:655 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1258ms total)
+T110C 002:655 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1258ms total)
+T110C 002:655 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2) -- CPU_ReadMem(2 bytes @ 0x20000000)  returns 0x00000025 (0002ms, 1260ms total)
+T110C 002:657 JLINK_Go() -- CPU_WriteMem(2 bytes @ 0x20000000) (0005ms, 1265ms total)
+T110C 002:662 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0008ms, 1273ms total)
+T110C 002:670 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1265ms total)
+T110C 002:670 JLINK_ClrBPEx(BPHandle = 0x00000025)  returns 0x00 (0000ms, 1265ms total)
+T110C 002:670 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1265ms total)
+T110C 002:671 JLINK_WriteReg(R0, 0xFFFFFFFF)  returns 0x00 (0000ms, 1265ms total)
+T110C 002:671 JLINK_WriteReg(R1, 0x08000000)  returns 0x00 (0000ms, 1265ms total)
+T110C 002:671 JLINK_WriteReg(R2, 0x00005230)  returns 0x00 (0000ms, 1265ms total)
+T110C 002:671 JLINK_WriteReg(R3, 0x04C11DB7)  returns 0x00 (0000ms, 1265ms total)
+T110C 002:671 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1265ms total)
+T110C 002:671 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1265ms total)
+T110C 002:671 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1265ms total)
+T110C 002:671 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1265ms total)
+T110C 002:671 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0001ms, 1266ms total)
+T110C 002:672 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1266ms total)
+T110C 002:672 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1266ms total)
+T110C 002:672 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1266ms total)
+T110C 002:672 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1266ms total)
+T110C 002:672 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0000ms, 1266ms total)
+T110C 002:672 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1266ms total)
+T110C 002:672 JLINK_WriteReg(R15 (PC), 0x20000002)  returns 0x00 (0000ms, 1266ms total)
+T110C 002:672 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1266ms total)
+T110C 002:672 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0001ms, 1267ms total)
+T110C 002:673 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1267ms total)
+T110C 002:673 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1267ms total)
+T110C 002:673 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000026 (0000ms, 1267ms total)
+T110C 002:673 JLINK_Go() (0003ms, 1270ms total)
+T110C 002:676 JLINK_IsHalted()  returns FALSE (0002ms, 1272ms total)
+T110C 002:745 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:748 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:751 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:754 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:757 JLINK_IsHalted()  returns FALSE (0002ms, 1272ms total)
+T110C 002:762 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:765 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:768 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:771 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:774 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:777 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:780 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:783 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:786 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:789 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:792 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:795 JLINK_IsHalted()  returns FALSE (0002ms, 1272ms total)
+T110C 002:799 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:802 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:805 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:808 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:817 JLINK_IsHalted()  returns FALSE (0002ms, 1272ms total)
+T110C 002:821 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:836 JLINK_IsHalted()  returns FALSE (0002ms, 1272ms total)
+T110C 002:840 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:843 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:846 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:849 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:852 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:856 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:859 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:862 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:865 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:868 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:871 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:874 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:877 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:880 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:883 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:886 JLINK_IsHalted()  returns FALSE (0002ms, 1272ms total)
+T110C 002:890 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:893 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:896 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:899 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:902 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:905 JLINK_IsHalted()  returns FALSE (0001ms, 1271ms total)
+T110C 002:908 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0005ms, 1275ms total)
+T110C 002:913 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1270ms total)
+T110C 002:913 JLINK_ClrBPEx(BPHandle = 0x00000026)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:913 JLINK_ReadReg(R0)  returns 0xA7798AED (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R0, 0x00000003)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R1, 0x08000000)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R2, 0x00005230)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R3, 0x04C11DB7)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R4, 0x00000000)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R5, 0x00000000)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R6, 0x00000000)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R7, 0x00000000)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R8, 0x00000000)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R9, 0x20000160)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R10, 0x00000000)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R11, 0x00000000)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R12, 0x00000000)  returns 0x00 (0000ms, 1270ms total)
+T110C 002:915 JLINK_WriteReg(R13 (SP), 0x20000800)  returns 0x00 (0001ms, 1271ms total)
+T110C 002:916 JLINK_WriteReg(R14, 0x20000001)  returns 0x00 (0000ms, 1271ms total)
+T110C 002:916 JLINK_WriteReg(R15 (PC), 0x2000006A)  returns 0x00 (0000ms, 1271ms total)
+T110C 002:916 JLINK_WriteReg(XPSR, 0x01000000)  returns 0x00 (0000ms, 1271ms total)
+T110C 002:916 JLINK_WriteReg(MSP, 0x20000800)  returns 0x00 (0000ms, 1271ms total)
+T110C 002:916 JLINK_WriteReg(PSP, 0x20000800)  returns 0x00 (0000ms, 1271ms total)
+T110C 002:916 JLINK_WriteReg(CFBP, 0x00000000)  returns 0x00 (0000ms, 1271ms total)
+T110C 002:916 JLINK_SetBPEx(Addr = 0x20000000, Type = 0xFFFFFFF2)  returns 0x00000027 (0000ms, 1271ms total)
+T110C 002:916 JLINK_Go() (0003ms, 1274ms total)
+T110C 002:919 JLINK_IsHalted() -- CPU_ReadMem(2 bytes @ 0x20000000)  returns TRUE (0007ms, 1281ms total)
+T110C 002:926 JLINK_ReadReg(R15 (PC))  returns 0x20000000 (0000ms, 1274ms total)
+T110C 002:926 JLINK_ClrBPEx(BPHandle = 0x00000027)  returns 0x00 (0000ms, 1274ms total)
+T110C 002:926 JLINK_ReadReg(R0)  returns 0x00000000 (0000ms, 1274ms total)
+T110C 002:985 JLINK_WriteMem(0x20000000, 0x0002 Bytes, ...) - Data: FE E7 -- CPU_WriteMem(2 bytes @ 0x20000000)  returns 0x02 (0002ms, 1276ms total)
+T110C 002:987 JLINK_SetResetType(JLINKARM_RESET_TYPE_NORMAL)  returns JLINKARM_RESET_TYPE_NORMAL (0000ms, 1276ms total)
+T110C 002:987 JLINK_Reset() -- CPU_WriteMem(4 bytes @ 0xE000EDF0) -- CPU_WriteMem(4 bytes @ 0xE000EDFC) >0x35 TIF> -- CPU_WriteMem(4 bytes @ 0xE000ED0C) -- CPU_ReadMem(4 bytes @ 0xE000EDF0) -- CPU_ReadMem(4 bytes @ 0xE000EDF0) -- CPU_WriteMem(4 bytes @ 0xE000EDF0) -- CPU_WriteMem(4 bytes @ 0xE000EDFC) -- CPU is running -- CPU_ReadMem(4 bytes @ 0xE000EDF0) -- CPU_WriteMem(4 bytes @ 0xE0002000) -- CPU_ReadMem(4 bytes @ 0xE000EDFC) -- CPU_ReadMem(4 bytes @ 0xE0001000) (0038ms, 1314ms total)
+T110C 003:026 JLINK_Go() -- CPU_WriteMem(4 bytes @ 0xE0002008) -- CPU_WriteMem(4 bytes @ 0xE000200C) -- CPU_WriteMem(4 bytes @ 0xE0002010) -- CPU_WriteMem(4 bytes @ 0xE0002014) -- CPU_WriteMem(4 bytes @ 0xE0002018) -- CPU_WriteMem(4 bytes @ 0xE000201C) -- CPU_WriteMem(4 bytes @ 0xE0001004) (0008ms, 1322ms total)
+T110C 003:074 JLINK_Close() -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE0002008) -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE000200C) -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE0002010) -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE0002014) -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE0002018) -- CPU is running -- CPU_WriteMem(4 bytes @ 0xE000201C) >0x42 TIF> >0x28 TIF> >0x0D TIF> >0x21 TIF> (0017ms, 1339ms total)
+T110C 003:074  (0017ms, 1339ms total)
+T110C 003:074 Closed (0017ms, 1339ms total)
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/JLinkSettings.ini b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/JLinkSettings.ini
new file mode 100644
index 0000000..5516360
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/JLinkSettings.ini	
@@ -0,0 +1,17 @@
+[FLASH]
+SkipProgOnCRCMatch = 1
+VerifyDownload = 1
+AllowCaching = 1
+EnableFlashDL = 2
+Override = 0
+Device="ADUC7020X62"
+[BREAKPOINTS]
+ShowInfoWin = 1
+EnableFlashBP = 2
+BPDuringExecution = 0
+[CPU]
+OverrideMemMap = 0
+AllowSimulation = 1
+ScriptFile=""
+[SWO]
+SWOLogFile=""
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.plg b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.plg
new file mode 100644
index 0000000..e15e3b5
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.plg	
@@ -0,0 +1,50 @@
+
+
+
    +
    Vision Build Log
    
+
    Project:
    
+D:\STM32\C8T6\Project_Demo\Project\Project.uvproj
+Project File Date:  07/13/2015
+
+
    Output:
    
+Build target 'PROJECT'
+assembling startup_stm32f10x_ld.s...
+compiling core_cm3.c...
+compiling system_stm32f10x.c...
+compiling misc.c...
+compiling stm32f10x_adc.c...
+compiling stm32f10x_bkp.c...
+compiling stm32f10x_can.c...
+compiling stm32f10x_cec.c...
+compiling stm32f10x_crc.c...
+compiling stm32f10x_dac.c...
+compiling stm32f10x_dbgmcu.c...
+compiling stm32f10x_dma.c...
+compiling stm32f10x_exti.c...
+compiling stm32f10x_flash.c...
+compiling stm32f10x_fsmc.c...
+compiling stm32f10x_gpio.c...
+compiling stm32f10x_i2c.c...
+compiling stm32f10x_iwdg.c...
+compiling stm32f10x_pwr.c...
+compiling stm32f10x_rcc.c...
+compiling stm32f10x_rtc.c...
+compiling stm32f10x_sdio.c...
+compiling stm32f10x_spi.c...
+compiling stm32f10x_tim.c...
+compiling stm32f10x_usart.c...
+compiling stm32f10x_wwdg.c...
+compiling bsp_led.c...
+compiling main.c...
+compiling stm32f10x_it.c...
+linking...
+Program Size: Code=2832 RO-data=268 RW-data=40 ZI-data=1632  
+FromELF: creating hex file...
+"..\Output\Project.axf" - 0 Error(s), 0 Warning(s).
+Build target 'PROJECT'
+compiling bsp_led.c...
+compiling main.c...
+linking...
+Program Size: Code=2780 RO-data=268 RW-data=40 ZI-data=1632  
+FromELF: creating hex file...
+"..\Output\Project.axf" - 0 Error(s), 0 Warning(s).
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvgui.Administrator b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvgui.Administrator
new file mode 100644
index 0000000..87ca7a7
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvgui.Administrator	
@@ -0,0 +1,2711 @@
+
+
+
+  -4.1
+
+  
    ### uVision Project, (C) Keil Software
    
+
+  
+
+  
+    
+      38003
+      Registers
+      115 168
+    
+    
+      346
+      Code Coverage
+      738 403
+    
+    
+      204
+      Performance Analyzer
+      773 134 134 100
+    
+  
+
+  
+    
+      1506
+      Symbols
+      
+      133 133 133
+    
+    
+      1936
+      Watch 1
+      
+      133 133 133
+    
+    
+      1937
+      Watch 2
+      
+      133 133 133
+    
+    
+      1935
+      Call Stack + Locals
+      
+      133 133 133
+    
+    
+      2506
+      Trace Data
+      
+      75 135 130 95 70 230 200
+    
+  
+
+  
+    1938
+    Run Time Environment
+    
+    300 250 30 60 60 500 -1 98 -21846
+  
+
+  
+    
+      0
+      0
+      0
+    
+  
+
+  
+    
+    
+      44
+      2
+      3
+      
+        -32000
+        -32000
+      
+      
+        -1
+        -1
+      
+      
+        395
+        103
+        1183
+        1020
+      
+    
+    
+      0
+      
+        836
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
+      
+    
+    
+      0
+      Build
+      
+        -1
+        -1
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9C0000004F00000028040000C4000000
+        
+        
+          16
+          9C0000006500000028040000DA000000
+        
+      
+      
+        1005
+        1005
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000002D010000A1020000
+        
+        
+          16
+          960000001B000000C6010000A4020000
+        
+      
+      
+        109
+        109
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000002D010000A1020000
+        
+        
+          16
+          960000001B000000C6010000A4020000
+        
+      
+      
+        1465
+        1465
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1466
+        1466
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1467
+        1467
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1468
+        1468
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1506
+        1506
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        1913
+        1913
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9F0000006600000025040000AB000000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1935
+        1935
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        1936
+        1936
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        1937
+        1937
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        1938
+        1938
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          000000000000000030010000D6010000
+        
+        
+          16
+          B7000000CD000000E7010000A3020000
+        
+      
+      
+        1939
+        1939
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1940
+        1940
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1941
+        1941
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1942
+        1942
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        195
+        195
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000002D010000A1020000
+        
+        
+          16
+          960000001B000000C6010000A4020000
+        
+      
+      
+        196
+        196
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000002D010000A1020000
+        
+        
+          16
+          960000001B000000C6010000A4020000
+        
+      
+      
+        197
+        197
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          03000000D50200009D0500001A030000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        198
+        198
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          00000000AF0100002804000038020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        199
+        199
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000D50200009D0500001A030000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        203
+        203
+        0
+        0
+        0
+        0
+        32767
+        0
+        8192
+        0
+        
+          16
+          9F0000006600000025040000AB000000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        204
+        204
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9F0000006600000025040000AB000000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        221
+        221
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000000000000000000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2506
+        2506
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        2507
+        2507
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        343
+        343
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9F0000006600000025040000AB000000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        346
+        346
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9F0000006600000025040000AB000000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        35824
+        35824
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9F0000006600000025040000AB000000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        35885
+        35885
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35886
+        35886
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35887
+        35887
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35888
+        35888
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35889
+        35889
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35890
+        35890
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35891
+        35891
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35892
+        35892
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35893
+        35893
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35894
+        35894
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35895
+        35895
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35896
+        35896
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35897
+        35897
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35898
+        35898
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35899
+        35899
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35900
+        35900
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35901
+        35901
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35902
+        35902
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35903
+        35903
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35904
+        35904
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35905
+        35905
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        38003
+        38003
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000002D010000A1020000
+        
+        
+          16
+          960000001B000000C6010000A4020000
+        
+      
+      
+        38007
+        38007
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000D50200009D0500001A030000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        436
+        436
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000D50200009D0500001A030000
+        
+        
+          16
+          B7000000CD0000004F010000A3020000
+        
+      
+      
+        437
+        437
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        440
+        440
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        59392
+        59392
+        1
+        0
+        0
+        0
+        940
+        0
+        8192
+        0
+        
+          16
+          0000000000000000B70300001C000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59393
+        0
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0000000033030000A005000046030000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59399
+        59399
+        1
+        0
+        0
+        0
+        439
+        0
+        8192
+        1
+        
+          16
+          000000001C000000C201000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59400
+        59400
+        0
+        0
+        0
+        0
+        612
+        0
+        8192
+        2
+        
+          16
+          00000000380000006F02000054000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2715
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
+      
+      
+        59392
+        File
+        
+          2030
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
+        
+        
+          1423
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
+        
+        
+          1423
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
+        
+      
+      
+        59399
+        Build
+        
+          641
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
+        
+        
+          548
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
+        
+        
+          548
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
+        
+      
+      
+        59400
+        Debug
+        
+          2220
+          00200000000000001900FFFF01001100434D4643546F6F6C426172427574746F6ECC880000000000002500000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000018017800000000000002600000000000000000000000000000000010000000100000001801D800000000000002700000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF00000000000000000000000000010000000100000001801A800000000000002800000000000000000000000000000000010000000100000001801B80000000000000290000000000000000000000000000000001000000010000000180E57F0000000000002A00000000000000000000000000000000010000000100000001801C800000000000002B00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000018000890000000000002C00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180E48B0000000000002D0000000000000000000000000000000001000000010000000180F07F0000000000002E0000000000000000000000000000000001000000010000000180E8880000000000003700000000000000000000000000000000010000000100000001803B010000000000002F0000000000000000000000000000000001000000010000000180BB8A00000000000030000000000000000000000000000000000100000001000000FFFF01001500434D4643546F6F6C4261724D656E75427574746F6E0E01000000000000310000000D57617463682057696E646F7773000000000000000000000000010000000100000000000000000000000100000002001380D88B000000000000310000000757617463682031000000000000000000000000010000000100000000000000000000000100000000001380D98B0000000000003100000007576174636820320000000000000000000000000100000001000000000000000000000001000000000013800F01000000000000320000000E4D656D6F72792057696E646F7773000000000000000000000000010000000100000000000000000000000100000004001380D28B00000000000032000000084D656D6F72792031000000000000000000000000010000000100000000000000000000000100000000001380D38B00000000000032000000084D656D6F72792032000000000000000000000000010000000100000000000000000000000100000000001380D48B00000000000032000000084D656D6F72792033000000000000000000000000010000000100000000000000000000000100000000001380D58B00000000000032000000084D656D6F727920340000000000000000000000000100000001000000000000000000000001000000000013801001000000000000330000000E53657269616C2057696E646F77730000000000000000000000000100000001000000000000000000000001000000040013809307000000000000330000000755415254202331000000000000000000000000010000000100000000000000000000000100000000001380940700000000000033000000075541525420233200000000000000000000000001000000010000000000000000000000010000000000138095070000000000003300000007554152542023330000000000000000000000000100000001000000000000000000000001000000000013809607000000000000330000000E49544D2F525441205669657765720000000000000000000000000100000001000000000000000000000001000000000013803C010000000000003400000010416E616C797369732057696E646F7773000000000000000000000000010000000100000000000000000000000100000003001380658A000000000000340000000E4C6F67696320416E616C797A6572000000000000000000000000010000000100000000000000000000000100000000001380DC7F0000000000003E00000014506572666F726D616E636520416E616C797A6572000000000000000000000000010000000100000000000000000000000100000000001380E788000000000000380000000D436F646520436F76657261676500000000000000000000000001000000010000000000000000000000010000000000138053010000000000003F0000000D54726163652057696E646F77730000000000000000000000000100000001000000000000000000000001000000010013805401000000000000FFFFFFFF115472616365204D656E7520416E63686F720000000000000000010000000000000001000000000000000000000001000000000013802901000000000000350000001553797374656D205669657765722057696E646F77730000000000000000000000000100000001000000000000000000000001000000010013804B01000000000000FFFFFFFF1453797374656D2056696577657220416E63686F720000000000000000010000000000000001000000000000000000000001000000000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000138001890000000000003600000007546F6F6C626F7800000000000000000000000001000000010000000000000000000000010000000300138044C5000000000000FFFFFFFF0E5570646174652057696E646F77730000000000000000010000000000000001000000000000000000000001000000000013800000000000000400FFFFFFFF000000000000000000010000000000000001000000000000000000000001000000000013805B01000000000000FFFFFFFF12546F6F6C626F78204D656E75416E63686F72000000000000000001000000000000000100000000000000000000000100000000000000000005446562756764020000
+        
+        
+          898
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
+        
+        
+          898
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
+        
+      
+      
+        0
+        1440
+        900
+      
+    
+    
+      1
+      Debug
+      
+        -1
+        -1
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C0000004F0000000B050000B6000000
+        
+        
+          16
+          8C000000650000000B050000CC000000
+        
+      
+      
+        1005
+        1005
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000220100009B020000
+        
+        
+          16
+          850000009B0000000D0100003A020000
+        
+      
+      
+        109
+        109
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000220100009B020000
+        
+        
+          16
+          850000009B0000000D0100003A020000
+        
+      
+      
+        1465
+        1465
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1466
+        1466
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1467
+        1467
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1468
+        1468
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1506
+        1506
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        1913
+        1913
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8F00000066000000080500009D000000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1935
+        1935
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        1936
+        1936
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        1937
+        1937
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        1938
+        1938
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          0000000000000000100100009F010000
+        
+        
+          16
+          850000009B000000950100003A020000
+        
+      
+      
+        1939
+        1939
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1940
+        1940
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1941
+        1941
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1942
+        1942
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        195
+        195
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000220100009B020000
+        
+        
+          16
+          850000009B0000000D0100003A020000
+        
+      
+      
+        196
+        196
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000220100009B020000
+        
+        
+          16
+          850000009B0000000D0100003A020000
+        
+      
+      
+        197
+        197
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          03000000A3010000B5030000DA010000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        198
+        198
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          00000000B8020000CF02000033030000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        199
+        199
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000A3010000B5030000DA010000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        203
+        203
+        0
+        0
+        0
+        0
+        32767
+        0
+        8192
+        0
+        
+          16
+          8F00000066000000080500009D000000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        204
+        204
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8F00000066000000080500009D000000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        221
+        221
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000000000000000000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2506
+        2506
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        2507
+        2507
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        343
+        343
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8F00000066000000080500009D000000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        346
+        346
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8F00000066000000080500009D000000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        35824
+        35824
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8F00000066000000080500009D000000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        35885
+        35885
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35886
+        35886
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35887
+        35887
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35888
+        35888
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35889
+        35889
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35890
+        35890
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35891
+        35891
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35892
+        35892
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35893
+        35893
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35894
+        35894
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35895
+        35895
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35896
+        35896
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35897
+        35897
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35898
+        35898
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35899
+        35899
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35900
+        35900
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35901
+        35901
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35902
+        35902
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35903
+        35903
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35904
+        35904
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35905
+        35905
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        38003
+        38003
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000220100009B020000
+        
+        
+          16
+          850000009B0000000D0100003A020000
+        
+      
+      
+        38007
+        38007
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000A3010000B5030000DA010000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        436
+        436
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000A3010000B5030000DA010000
+        
+        
+          16
+          850000009B0000000D0100003A020000
+        
+      
+      
+        437
+        437
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        440
+        440
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          D6020000CF0200009D0500001A030000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        59392
+        59392
+        1
+        0
+        0
+        0
+        940
+        0
+        8192
+        0
+        
+          16
+          0000000000000000B70300001C000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59393
+        0
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0000000033030000A005000046030000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59399
+        59399
+        0
+        0
+        0
+        0
+        439
+        0
+        8192
+        1
+        
+          16
+          000000001C000000C201000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59400
+        59400
+        1
+        0
+        0
+        0
+        612
+        0
+        8192
+        2
+        
+          16
+          000000001C0000006F02000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2714
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
+      
+      
+        59392
+        File
+        
+          2030
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
+        
+        
+          1423
+          2800FFFF01001100434D4643546F6F6C426172427574746F6E00E1000000000000FFFFFFFF000100000000000000010000000000000001000000018001E1000000000000FFFFFFFF000100000000000000010000000000000001000000018003E1000000000000FFFFFFFF0001000000000000000100000000000000010000000180CD7F000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF000000000000000000010000000000000001000000018023E1000000000000FFFFFFFF000100000000000000010000000000000001000000018022E1000000000000FFFFFFFF000100000000000000010000000000000001000000018025E1000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001802BE1000000000000FFFFFFFF00010000000000000001000000000000000100000001802CE1000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001807A8A000000000000FFFFFFFF00010000000000000001000000000000000100000001807B8A000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180D3B0000000000000FFFFFFFF000100000000000000010000000000000001000000018015B1000000000000FFFFFFFF0001000000000000000100000000000000010000000180F4B0000000000000FFFFFFFF000100000000000000010000000000000001000000018036B1000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180FF88000000000000FFFFFFFF0001000000000000000100000000000000010000000180FE88000000000000FFFFFFFF00010000000000000001000000000000000100000001800B81000000000000FFFFFFFF00010000000000000001000000000000000100000001800C81000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180F088000000000000FFFFFFFF0001000000000000000100000000000000010000000180EE7F000000000000FFFFFFFF000100000000000000010000000000000001000000018024E1000000000000FFFFFFFF00010000000000000001000000000000000100000001800A81000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001802280000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180C488000000000000FFFFFFFF0001000000000000000100000000000000010000000180C988000000000000FFFFFFFF0001000000000000000100000000000000010000000180C788000000000000FFFFFFFF0001000000000000000100000000000000010000000180C888000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180DD88000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180FB7F000000000000FFFFFFFF000100000000000000010000000000000001000000
+        
+        
+          1423
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
+        
+      
+      
+        59399
+        Build
+        
+          622
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
+        
+        
+          548
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
+        
+        
+          548
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
+        
+      
+      
+        59400
+        Debug
+        
+          2220
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
+        
+        
+          898
+          1900FFFF01001100434D4643546F6F6C426172427574746F6ECC88000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001801780000000000000FFFFFFFF00010000000000000001000000000000000100000001801D80000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001801A80000000000000FFFFFFFF00010000000000000001000000000000000100000001801B80000000000000FFFFFFFF0001000000000000000100000000000000010000000180E57F000000000000FFFFFFFF00010000000000000001000000000000000100000001801C80000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001800089000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180E48B000000000000FFFFFFFF0001000000000000000100000000000000010000000180F07F000000000000FFFFFFFF0001000000000000000100000000000000010000000180E888000000000000FFFFFFFF00010000000000000001000000000000000100000001803B01000000000000FFFFFFFF0001000000000000000100000000000000010000000180BB8A000000000000FFFFFFFF0001000000000000000100000000000000010000000180D88B000000000000FFFFFFFF0001000000000000000100000000000000010000000180D28B000000000000FFFFFFFF00010000000000000001000000000000000100000001809307000000000000FFFFFFFF0001000000000000000100000000000000010000000180658A000000000000FFFFFFFF0001000000000000000100000000000000010000000180C18A000000000000FFFFFFFF0001000000000000000100000000000000010000000180EE8B000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001800189000000000000FFFFFFFF000100000000000000010000000000000001000000
+        
+        
+          898
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
+        
+      
+      
+        0
+        1440
+        900
+      
+    
+  
+
+  
+
+  
+    1
+    0
+    
+      100
+      2
+      
+        ..\HARDWARE\OLED\oled.c
+        2
+        7
+        10
+        1
+        
+        0
+      
+      
+        ..\DRV\iic\bsp_iic.c
+        0
+        199
+        200
+        1
+        
+        0
+      
+      
+        ..\User\main.c
+        41
+        50
+        85
+        1
+        
+        0
+      
+      
+        ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s
+        0
+        120
+        133
+        1
+        
+        0
+      
+      
+        ..\DRV\GPIO\bsp_GPIO.c
+        7
+        1
+        27
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\24CXX\24cxx.c
+        0
+        1
+        1
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\24L01\24l01.c
+        13
+        31
+        38
+        1
+        
+        0
+      
+      
+        ..\DRV\delay\delay.c
+        23
+        13
+        76
+        1
+        
+        0
+      
+    
+  
+
+    
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvgui_Administrator.bak b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvgui_Administrator.bak
new file mode 100644
index 0000000..1b75318
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvgui_Administrator.bak	
@@ -0,0 +1,2684 @@
+
+
+
+  -4.1
+
+  
    ### uVision Project, (C) Keil Software
    
+
+  
+
+  
+    
+      38003
+      Registers
+      115 179
+    
+    
+      346
+      Code Coverage
+      738 160
+    
+    
+      204
+      Performance Analyzer
+      898
+    
+  
+
+  
+    
+      1506
+      Symbols
+      
+      133 133 133
+    
+    
+      1936
+      Watch 1
+      
+      133 133 133
+    
+    
+      1937
+      Watch 2
+      
+      133 133 133
+    
+    
+      1935
+      Call Stack + Locals
+      
+      133 133 133
+    
+    
+      2506
+      Trace Data
+      
+      75 135 130 95 70 230 200
+    
+  
+
+  
+    1938
+    Run Time Environment
+    
+    0 250 30 60 60 500 -1 98 -21846
+  
+
+  
+    
+      0
+      0
+      0
+    
+  
+
+  
+    
+    
+      44
+      2
+      3
+      
+        -1
+        -1
+      
+      
+        -1
+        -1
+      
+      
+        0
+        165
+        1245
+        625
+      
+    
+    
+      0
+      
+        933
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
+      
+    
+    
+      0
+      Build
+      
+        -1
+        -1
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9C0000004F00000028040000C4000000
+        
+        
+          16
+          3A01000003010000C604000078010000
+        
+      
+      
+        1005
+        1005
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000002D010000A1020000
+        
+        
+          16
+          960000001B000000C6010000A4020000
+        
+      
+      
+        109
+        109
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000002D010000A1020000
+        
+        
+          16
+          960000001B000000C6010000A4020000
+        
+      
+      
+        1465
+        1465
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1466
+        1466
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1467
+        1467
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1468
+        1468
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1506
+        1506
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        1913
+        1913
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9F0000006600000025040000AB000000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1935
+        1935
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        1936
+        1936
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        1937
+        1937
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        1938
+        1938
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          000000000000000030010000D6010000
+        
+        
+          16
+          B7000000CD000000E7010000A3020000
+        
+      
+      
+        1939
+        1939
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1940
+        1940
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1941
+        1941
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        1942
+        1942
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        195
+        195
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000002D010000A1020000
+        
+        
+          16
+          960000001B000000C6010000A4020000
+        
+      
+      
+        196
+        196
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000002D010000A1020000
+        
+        
+          16
+          960000001B000000C6010000A4020000
+        
+      
+      
+        197
+        197
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          03000000D50200009D0500001A030000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        198
+        198
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          00000000AF0100002804000038020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        199
+        199
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000D5020000150500001A030000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        203
+        203
+        0
+        0
+        0
+        0
+        32767
+        0
+        8192
+        0
+        
+          16
+          9F0000006600000025040000AB000000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        204
+        204
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9F0000006600000025040000AB000000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        221
+        221
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000000000000000000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2506
+        2506
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        2507
+        2507
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        343
+        343
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9F0000006600000025040000AB000000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        346
+        346
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9F0000006600000025040000AB000000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        35824
+        35824
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9F0000006600000025040000AB000000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        35885
+        35885
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35886
+        35886
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35887
+        35887
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35888
+        35888
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35889
+        35889
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35890
+        35890
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35891
+        35891
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35892
+        35892
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35893
+        35893
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35894
+        35894
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35895
+        35895
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35896
+        35896
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35897
+        35897
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35898
+        35898
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35899
+        35899
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35900
+        35900
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35901
+        35901
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35902
+        35902
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35903
+        35903
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35904
+        35904
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        35905
+        35905
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9B0200006600000025040000A6010000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        38003
+        38003
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000002D01000045020000
+        
+        
+          16
+          960000001B000000C6010000A4020000
+        
+      
+      
+        38007
+        38007
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000D50200009D0500001A030000
+        
+        
+          16
+          B7000000CD000000CB02000042010000
+        
+      
+      
+        436
+        436
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000D5020000150500001A030000
+        
+        
+          16
+          B7000000CD0000004F010000A3020000
+        
+      
+      
+        437
+        437
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        440
+        440
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000C6010000250400001F020000
+        
+        
+          16
+          B7000000CD000000470200005D020000
+        
+      
+      
+        59392
+        59392
+        1
+        0
+        0
+        0
+        940
+        0
+        8192
+        0
+        
+          16
+          0000000000000000B70300001C000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59393
+        0
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0000000033030000A005000046030000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59399
+        59399
+        1
+        0
+        0
+        0
+        439
+        0
+        8192
+        1
+        
+          16
+          000000001C000000C201000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59400
+        59400
+        0
+        0
+        0
+        0
+        612
+        0
+        8192
+        2
+        
+          16
+          00000000380000006F02000054000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2715
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
+      
+      
+        59392
+        File
+        
+          2002
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
+        
+        
+          1423
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
+        
+        
+          1423
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
+        
+      
+      
+        59399
+        Build
+        
+          641
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
+        
+        
+          548
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
+        
+        
+          548
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
+        
+      
+      
+        59400
+        Debug
+        
+          2220
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
+        
+        
+          898
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
+        
+        
+          898
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
+        
+      
+      
+        0
+        1440
+        900
+      
+    
+    
+      1
+      Debug
+      
+        -1
+        -1
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C0000004F0000000B050000B6000000
+        
+        
+          16
+          8C00000065000000B8030000CC000000
+        
+      
+      
+        1005
+        1005
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000850000003F020000
+        
+        
+          16
+          850000009B0000000D0100003A020000
+        
+      
+      
+        109
+        109
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000850000005B010000
+        
+        
+          16
+          850000009B0000000D0100003A020000
+        
+      
+      
+        1465
+        1465
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C0200007302000008050000BE020000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1466
+        1466
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C020000730200005E040000BE020000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1467
+        1467
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C020000730200005E040000BE020000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1468
+        1468
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C020000730200005E040000BE020000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1506
+        1506
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        1913
+        1913
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8F00000066000000B50300009D000000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1935
+        1935
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          8C0200007302000008050000BE020000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        1936
+        1936
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C020000730200005E040000BE020000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        1937
+        1937
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C020000730200005E040000BE020000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        1938
+        1938
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          0000000000000000100100009F010000
+        
+        
+          16
+          850000009B000000950100003A020000
+        
+      
+      
+        1939
+        1939
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C020000730200005E040000BE020000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1940
+        1940
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C020000730200005E040000BE020000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1941
+        1941
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C020000730200005E040000BE020000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        1942
+        1942
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C020000730200005E040000BE020000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        195
+        195
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000850000005B010000
+        
+        
+          16
+          850000009B0000000D0100003A020000
+        
+      
+      
+        196
+        196
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000850000005B010000
+        
+        
+          16
+          850000009B0000000D0100003A020000
+        
+      
+      
+        197
+        197
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          03000000A3010000B5030000DA010000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        198
+        198
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          000000005C02000085020000D7020000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        199
+        199
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000A3010000B5030000DA010000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        203
+        203
+        0
+        0
+        0
+        0
+        32767
+        0
+        8192
+        0
+        
+          16
+          8C000000630000000B050000B6000000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        204
+        204
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8F00000066000000B50300009D000000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        221
+        221
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000000000000000000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2506
+        2506
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        2507
+        2507
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C020000730200005E040000BE020000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        343
+        343
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8F00000066000000B50300009D000000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        346
+        346
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8F00000066000000B50300009D000000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        35824
+        35824
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8F00000066000000B50300009D000000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        35885
+        35885
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35886
+        35886
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35887
+        35887
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35888
+        35888
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35889
+        35889
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35890
+        35890
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35891
+        35891
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35892
+        35892
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35893
+        35893
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35894
+        35894
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35895
+        35895
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35896
+        35896
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35897
+        35897
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35898
+        35898
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35899
+        35899
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35900
+        35900
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35901
+        35901
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35902
+        35902
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35903
+        35903
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35904
+        35904
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        35905
+        35905
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2B02000066000000B50300006F010000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        38003
+        38003
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000850000003F020000
+        
+        
+          16
+          850000009B0000000D0100003A020000
+        
+      
+      
+        38007
+        38007
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000A3010000B5030000DA010000
+        
+        
+          16
+          850000009B0000006102000002010000
+        
+      
+      
+        436
+        436
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000A3010000B5030000DA010000
+        
+        
+          16
+          850000009B0000000D0100003A020000
+        
+      
+      
+        437
+        437
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C020000730200005E040000BE020000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        440
+        440
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8C020000730200005E040000BE020000
+        
+        
+          16
+          850000009B000000150200002B020000
+        
+      
+      
+        59392
+        59392
+        1
+        0
+        0
+        0
+        940
+        0
+        8192
+        0
+        
+          16
+          0000000000000000B70300001C000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59393
+        0
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000D70200000B050000EA020000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59399
+        59399
+        0
+        0
+        0
+        0
+        439
+        0
+        8192
+        1
+        
+          16
+          000000001C000000C201000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59400
+        59400
+        1
+        0
+        0
+        0
+        612
+        0
+        8192
+        2
+        
+          16
+          000000001C0000006F02000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2714
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
+      
+      
+        59392
+        File
+        
+          2002
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
+        
+        
+          1423
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
+        
+        
+          1423
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
+        
+      
+      
+        59399
+        Build
+        
+          622
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
+        
+        
+          548
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
+        
+        
+          548
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
+        
+      
+      
+        59400
+        Debug
+        
+          2220
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
+        
+        
+          898
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
+        
+        
+          898
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
+        
+      
+      
+        0
+        1366
+        768
+      
+    
+  
+
+  
+
+  
+    1
+    0
+    
+      100
+      2
+      
+        ..\HARDWARE\OLED\oled.c
+        2
+        6
+        10
+        1
+        
+        0
+      
+      
+        ..\DRV\iic\bsp_iic.c
+        0
+        199
+        200
+        1
+        
+        0
+      
+      
+        ..\User\main.c
+        14
+        28
+        39
+        1
+        
+        0
+      
+      
+        ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s
+        0
+        124
+        133
+        1
+        
+        0
+      
+      
+        ..\DRV\GPIO\bsp_GPIO.c
+        10
+        9
+        27
+        1
+        
+        0
+      
+    
+  
+
+    
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvguix.Administrator b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvguix.Administrator
new file mode 100644
index 0000000..aba4151
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvguix.Administrator	
@@ -0,0 +1,1771 @@
+
+
+
+  -6.1
+
+  
    ### uVision Project, (C) Keil Software
    
+
+  
+
+  
+    
+      38003
+      Registers
+      115 198
+    
+    
+      346
+      Code Coverage
+      1010 160
+    
+    
+      204
+      Performance Analyzer
+      1170
+    
+  
+
+  
+    
+      1506
+      Symbols
+      
+      60 60 60
+    
+    
+      1936
+      Watch 1
+      
+      60 60 60
+    
+    
+      1937
+      Watch 2
+      
+      60 60 60
+    
+    
+      1935
+      Call Stack + Locals
+      
+      60 60 60
+    
+    
+      2506
+      Trace Data
+      
+      75 135 130 95 70 230 200 150
+    
+  
+
+  
+
+  
+    
+      0
+      0
+      0
+      50
+      16
+    
+  
+
+  
+    
+    
+      44
+      2
+      3
+      
+        -1
+        -1
+      
+      
+        -1
+        -1
+      
+      
+        26
+        26
+        1509
+        886
+      
+    
+    
+      0
+      
+        351
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
+      
+    
+    
+      0
+      Build
+      
+        -1
+        -1
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          F40000004F00000090050000DA000000
+        
+        
+          16
+          F40000006600000090050000F1000000
+        
+      
+      
+        1005
+        1005
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000004001000041020000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        109
+        109
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000004001000041020000
+        
+        
+          16
+          A4000000BB000000C0010000EA020000
+        
+      
+      
+        1465
+        1465
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        1466
+        1466
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        1467
+        1467
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        1468
+        1468
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        1506
+        1506
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        1913
+        1913
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          F7000000660000008D050000C1000000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        1935
+        1935
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        1936
+        1936
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        1937
+        1937
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        1939
+        1939
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        1940
+        1940
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        1941
+        1941
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        1942
+        1942
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        195
+        195
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000004001000041020000
+        
+        
+          16
+          A4000000BB000000C0010000EA020000
+        
+      
+      
+        196
+        196
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000004001000041020000
+        
+        
+          16
+          A4000000BB000000C0010000EA020000
+        
+      
+      
+        197
+        197
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          0000000072020000B705000038030000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        198
+        198
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          000000000802000090050000A7020000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        199
+        199
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000750200007D0700001F030000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        203
+        203
+        0
+        0
+        0
+        0
+        32767
+        0
+        8192
+        0
+        
+          16
+          F7000000660000008D050000C1000000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        204
+        204
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          F7000000660000008D050000C1000000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        221
+        221
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000000000000000000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2506
+        2506
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        2507
+        2507
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        343
+        343
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          F7000000660000008D050000C1000000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        346
+        346
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          F7000000660000008D050000C1000000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        35824
+        35824
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          F7000000660000008D050000C1000000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        35885
+        35885
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35886
+        35886
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35887
+        35887
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35888
+        35888
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35889
+        35889
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35890
+        35890
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35891
+        35891
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35892
+        35892
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35893
+        35893
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35894
+        35894
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35895
+        35895
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35896
+        35896
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35897
+        35897
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35898
+        35898
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35899
+        35899
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35900
+        35900
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35901
+        35901
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35902
+        35902
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35903
+        35903
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35904
+        35904
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        35905
+        35905
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        38003
+        38003
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000006600000040010000E7020000
+        
+        
+          16
+          A4000000BB000000C0010000EA020000
+        
+      
+      
+        38007
+        38007
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000750200007D0700001F030000
+        
+        
+          16
+          A4000000BB0000006C03000046010000
+        
+      
+      
+        436
+        436
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000750200007D0700001F030000
+        
+        
+          16
+          A4000000BB000000C0010000EA020000
+        
+      
+      
+        437
+        437
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        440
+        440
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000001F0200008D0500008E020000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50000
+        50000
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50001
+        50001
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50002
+        50002
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50003
+        50003
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50004
+        50004
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50005
+        50005
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50006
+        50006
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50007
+        50007
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50008
+        50008
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50009
+        50009
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50010
+        50010
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50011
+        50011
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50012
+        50012
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50013
+        50013
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50014
+        50014
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50015
+        50015
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50016
+        50016
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50017
+        50017
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50018
+        50018
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        50019
+        50019
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          A3040000660000008D050000FF010000
+        
+        
+          16
+          A4000000BB0000009401000084010000
+        
+      
+      
+        59392
+        59392
+        1
+        0
+        0
+        0
+        940
+        0
+        8192
+        0
+        
+          16
+          0000000000000000B70300001C000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59393
+        0
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0000000038030000B70500004B030000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59399
+        59399
+        1
+        0
+        0
+        0
+        463
+        0
+        8192
+        1
+        
+          16
+          000000001C000000DA01000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59400
+        59400
+        0
+        0
+        0
+        0
+        612
+        0
+        8192
+        2
+        
+          16
+          00000000380000006F02000054000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        3119
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
+      
+      
+        59392
+        File
+        
+          2053
+          00200000010000002800FFFF01001100434D4643546F6F6C426172427574746F6E00E100000000000000000000000000000000000000000000000100000001000000018001E100000000000001000000000000000000000000000000000100000001000000018003E1000000000000020000000000000000000000000000000001000000010000000180CD7F0000000000000300000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000018023E100000000040004000000000000000000000000000000000100000001000000018022E100000000040005000000000000000000000000000000000100000001000000018025E10000000000000600000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF00000000000000000000000000010000000100000001802BE10000000004000700000000000000000000000000000000010000000100000001802CE10000000004000800000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF00000000000000000000000000010000000100000001807A8A0000000000000900000000000000000000000000000000010000000100000001807B8A0000000004000A00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180D3B00000000000000B000000000000000000000000000000000100000001000000018015B10000000004000C0000000000000000000000000000000001000000010000000180F4B00000000004000D000000000000000000000000000000000100000001000000018036B10000000004000E00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180FF88000000000400460000000000000000000000000000000001000000010000000180FE880000000004004500000000000000000000000000000000010000000100000001800B810000000004001300000000000000000000000000000000010000000100000001800C810000000004001400000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180F0880000020000000F000000000000000000000000000000000100000001000000FFFF0100120043555646696E64436F6D626F427574746F6EE80300000000000000000000000000000000000000000000000100000001000000960000000200205000000000022D2D96000000000000000300022D2D0C4D4F544F5F50574D5F4F7574145243435F415042325065726970685F54494D3131000000000000000000000000018024E10000000000001100000000000000000000000000000000010000000100000001800A810000000000001200000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000018022800000020000001500000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180C488000000000000160000000000000000000000000000000001000000010000000180C988000000000400180000000000000000000000000000000001000000010000000180C788000000000000190000000000000000000000000000000001000000010000000180C8880000000000001700000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000FFFF01001500434D4643546F6F6C4261724D656E75427574746F6E4C010000020001001A0000000F2650726F6A6563742057696E646F77000000000000000000000000010000000100000000000000000000000100000008002880DD880000000000001A0000000750726F6A656374000000000000000000000000010000000100000000000000000000000100000000002880DC8B0000000000003A00000005426F6F6B73000000000000000000000000010000000100000000000000000000000100000000002880E18B0000000000003B0000000946756E6374696F6E73000000000000000000000000010000000100000000000000000000000100000000002880E28B000000000000400000000954656D706C6174657300000000000000000000000001000000010000000000000000000000010000000000288018890000000000003D0000000E536F757263652042726F777365720000000000000000000000000100000001000000000000000000000001000000000028800000000000000400FFFFFFFF00000000000000000001000000000000000100000000000000000000000100000000002880D988000000000000390000000C4275696C64204F7574707574000000000000000000000000010000000100000000000000000000000100000000002880E38B000000000000410000000B46696E64204F75747075740000000000000000000000000100000001000000000000000000000001000000000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180FB7F0000000000001B000000000000000000000000000000000100000001000000000000000446696C65AC030000
+        
+        
+          1423
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
+        
+        
+          1423
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
+        
+      
+      
+        59399
+        Build
+        
+          676
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
+        
+        
+          583
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
+        
+        
+          583
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
+        
+      
+      
+        59400
+        Debug
+        
+          2373
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
+        
+        
+          898
+          1900FFFF01001100434D4643546F6F6C426172427574746F6ECC88000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001801780000000000000FFFFFFFF00010000000000000001000000000000000100000001801D80000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001801A80000000000000FFFFFFFF00010000000000000001000000000000000100000001801B80000000000000FFFFFFFF0001000000000000000100000000000000010000000180E57F000000000000FFFFFFFF00010000000000000001000000000000000100000001801C80000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001800089000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180E48B000000000000FFFFFFFF0001000000000000000100000000000000010000000180F07F000000000000FFFFFFFF0001000000000000000100000000000000010000000180E888000000000000FFFFFFFF00010000000000000001000000000000000100000001803B01000000000000FFFFFFFF0001000000000000000100000000000000010000000180BB8A000000000000FFFFFFFF0001000000000000000100000000000000010000000180D88B000000000000FFFFFFFF0001000000000000000100000000000000010000000180D28B000000000000FFFFFFFF00010000000000000001000000000000000100000001809307000000000000FFFFFFFF0001000000000000000100000000000000010000000180658A000000000000FFFFFFFF0001000000000000000100000000000000010000000180C18A000000000000FFFFFFFF0001000000000000000100000000000000010000000180EE8B000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001800189000000000000FFFFFFFF000100000000000000010000000000000001000000
+        
+        
+          898
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
+        
+      
+      
+        0
+        1463
+        914
+      
+    
+  
+
+  
+    1
+    0
+    
+      100
+      1
+      
+        ..\User\main.c
+        12
+        14
+        32
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\MOTO\car.c
+        38
+        64
+        83
+        1
+        
+        0
+      
+    
+  
+
+    
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvguix.admin b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvguix.admin
new file mode 100644
index 0000000..d9f5e4c
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvguix.admin	
@@ -0,0 +1,1825 @@
+
+
+
+  -6.1
+
+  
    ### uVision Project, (C) Keil Software
    
+
+  
+
+  
+    
+      38003
+      Registers
+      115 73
+    
+    
+      346
+      Code Coverage
+      725 160
+    
+    
+      204
+      Performance Analyzer
+      885
+    
+  
+
+  
+    
+      1506
+      Symbols
+      
+      60 60 60
+    
+    
+      1936
+      Watch 1
+      
+      60 60 60
+    
+    
+      1937
+      Watch 2
+      
+      60 60 60
+    
+    
+      1935
+      Call Stack + Locals
+      
+      60 60 60
+    
+    
+      2506
+      Trace Data
+      
+      75 135 130 95 70 230 200 150
+    
+  
+
+  
+
+  
+    
+      1
+      1
+      0
+      0
+      -1
+    
+  
+
+  
+    
+    
+      44
+      2
+      3
+      
+        -1
+        -1
+      
+      
+        -1
+        -1
+      
+      
+        146
+        197
+        1295
+        762
+      
+    
+    
+      0
+      
+        1188
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
+      
+    
+    
+      0
+      Build
+      
+        -1
+        -1
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BA0000004F00000039040000C2000000
+        
+        
+          16
+          BA0000006600000039040000D9000000
+        
+      
+      
+        1005
+        1005
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000C300000085020000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        109
+        109
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000C300000085020000
+        
+        
+          16
+          BE000000D500000096010000A3020000
+        
+      
+      
+        1465
+        1465
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        1466
+        1466
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        1467
+        1467
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        1468
+        1468
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        1506
+        1506
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        1913
+        1913
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BD0000006600000036040000A9000000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        1935
+        1935
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        1936
+        1936
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        1937
+        1937
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        1939
+        1939
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        1940
+        1940
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        1941
+        1941
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        1942
+        1942
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        195
+        195
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000C300000085020000
+        
+        
+          16
+          BE000000D500000096010000A3020000
+        
+      
+      
+        196
+        196
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000C300000085020000
+        
+        
+          16
+          BE000000D500000096010000A3020000
+        
+      
+      
+        197
+        197
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          00000000B6020000B705000038030000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        198
+        198
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          00000000A7010000390400002E020000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        199
+        199
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000B9020000B40500001F030000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        203
+        203
+        0
+        0
+        0
+        0
+        32767
+        0
+        8192
+        0
+        
+          16
+          BD0000006600000036040000A9000000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        204
+        204
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BD0000006600000036040000A9000000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        221
+        221
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000000000000000000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2506
+        2506
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        2507
+        2507
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        343
+        343
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BD0000006600000036040000A9000000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        346
+        346
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BD0000006600000036040000A9000000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        35824
+        35824
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BD0000006600000036040000A9000000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        35885
+        35885
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35886
+        35886
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35887
+        35887
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35888
+        35888
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35889
+        35889
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35890
+        35890
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35891
+        35891
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35892
+        35892
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35893
+        35893
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35894
+        35894
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35895
+        35895
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35896
+        35896
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35897
+        35897
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35898
+        35898
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35899
+        35899
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35900
+        35900
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35901
+        35901
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35902
+        35902
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35903
+        35903
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35904
+        35904
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        35905
+        35905
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        38003
+        38003
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000C300000085020000
+        
+        
+          16
+          BE000000D500000096010000A3020000
+        
+      
+      
+        38007
+        38007
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000B9020000B40500001F030000
+        
+        
+          16
+          BE000000D5000000DA02000048010000
+        
+      
+      
+        436
+        436
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000B9020000B40500001F030000
+        
+        
+          16
+          BE000000D500000096010000A3020000
+        
+      
+      
+        437
+        437
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        440
+        440
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000BE0100003604000015020000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50000
+        50000
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50001
+        50001
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50002
+        50002
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50003
+        50003
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50004
+        50004
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50005
+        50005
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50006
+        50006
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50007
+        50007
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50008
+        50008
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50009
+        50009
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50010
+        50010
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50011
+        50011
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50012
+        50012
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50013
+        50013
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50014
+        50014
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50015
+        50015
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50016
+        50016
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50017
+        50017
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50018
+        50018
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        50019
+        50019
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8603000066000000360400009E010000
+        
+        
+          16
+          BE000000D5000000740100007D010000
+        
+      
+      
+        59392
+        59392
+        1
+        0
+        0
+        0
+        940
+        0
+        8192
+        0
+        
+          16
+          0000000000000000B70300001C000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59393
+        0
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0000000038030000B70500004B030000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59399
+        59399
+        1
+        0
+        0
+        0
+        463
+        0
+        8192
+        1
+        
+          16
+          000000001C000000DA01000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59400
+        59400
+        0
+        0
+        0
+        0
+        612
+        0
+        8192
+        2
+        
+          16
+          00000000380000006F02000054000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        3119
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
+      
+      
+        59392
+        File
+        
+          2029
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
+        
+        
+          1423
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
+        
+        
+          1423
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
+        
+      
+      
+        59399
+        Build
+        
+          676
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
+        
+        
+          583
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
+        
+        
+          583
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
+        
+      
+      
+        59400
+        Debug
+        
+          2373
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
+        
+        
+          898
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
+        
+        
+          898
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
+        
+      
+      
+        0
+        1463
+        914
+      
+    
+  
+
+  
+    1
+    0
+    
+      100
+      7
+      
+        ..\HARDWARE\MOTO\car.c
+        16
+        66
+        78
+        1
+        
+        0
+      
+      
+        ..\DRV\bsp_usart.c
+        0
+        70
+        87
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\PID\pid.c
+        0
+        1
+        1
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\MOTO\car.h
+        0
+        1
+        5
+        1
+        
+        0
+      
+      
+        ..\DRV\bsp_timer.c
+        41
+        58
+        71
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\MOTO\moto.h
+        17
+        1
+        4
+        1
+        
+        0
+      
+      
+        ..\User\main.c
+        8
+        1
+        26
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\MOTO\moto.c
+        0
+        79
+        89
+        1
+        
+        0
+      
+    
+  
+
+    
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvguix.li324 b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvguix.li324
new file mode 100644
index 0000000..fc1f7c1
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvguix.li324	
@@ -0,0 +1,2754 @@
+
+
+
+  -5.1
+
+  
    ### uVision Project, (C) Keil Software
    
+
+  
+
+  
+    
+      38003
+      Registers
+      115 275
+    
+    
+      346
+      Code Coverage
+      370 160
+    
+    
+      204
+      Performance Analyzer
+      530
+    
+  
+
+  
+    
+      1506
+      Symbols
+      
+      133 133 133
+    
+    
+      1936
+      Watch 1
+      
+      133 133 133
+    
+    
+      1937
+      Watch 2
+      
+      133 133 133
+    
+    
+      1935
+      Call Stack + Locals
+      
+      133 133 133
+    
+    
+      2506
+      Trace Data
+      
+      75 135 130 95 70 230 200 150
+    
+  
+
+  
+    
+      0
+      0
+      0
+      50
+      16
+    
+  
+
+  
+    
+    
+      44
+      2
+      3
+      
+        -1
+        -1
+      
+      
+        -1
+        -1
+      
+      
+        44
+        383
+        1457
+        526
+      
+    
+    
+      0
+      
+        3421
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
+      
+    
+    
+      0
+      Build
+      
+        -1
+        -1
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          940100004F000000B0030000B3000000
+        
+        
+          16
+          9401000066000000B0030000CA000000
+        
+      
+      
+        1005
+        1005
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000008D010000F4010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        109
+        109
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000008D010000F4010000
+        
+        
+          16
+          70000000870000002C010000E9010000
+        
+      
+      
+        1465
+        1465
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        1466
+        1466
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        1467
+        1467
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        1468
+        1468
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        1506
+        1506
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        1913
+        1913
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9701000066000000AD0300009A000000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        1935
+        1935
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        1936
+        1936
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        1937
+        1937
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        1939
+        1939
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        1940
+        1940
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        1941
+        1941
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        1942
+        1942
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        195
+        195
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000008D010000F4010000
+        
+        
+          16
+          70000000870000002C010000E9010000
+        
+      
+      
+        196
+        196
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000008D010000F4010000
+        
+        
+          16
+          70000000870000002C010000E9010000
+        
+      
+      
+        197
+        197
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          0300000028020000FD04000065020000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        198
+        198
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          000000003B010000B0030000A7010000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        199
+        199
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          0300000028020000FD04000065020000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        203
+        203
+        0
+        0
+        0
+        0
+        32767
+        0
+        8192
+        0
+        
+          16
+          9701000066000000AD0300009A000000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        204
+        204
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9701000066000000AD0300009A000000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        221
+        221
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000000000000000000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2506
+        2506
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        2507
+        2507
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        343
+        343
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9701000066000000AD0300009A000000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        346
+        346
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9701000066000000AD0300009A000000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        35824
+        35824
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9701000066000000AD0300009A000000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        35885
+        35885
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35886
+        35886
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35887
+        35887
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35888
+        35888
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35889
+        35889
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35890
+        35890
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35891
+        35891
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35892
+        35892
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35893
+        35893
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35894
+        35894
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35895
+        35895
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35896
+        35896
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35897
+        35897
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35898
+        35898
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35899
+        35899
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35900
+        35900
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35901
+        35901
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35902
+        35902
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35903
+        35903
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35904
+        35904
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        35905
+        35905
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        38003
+        38003
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000008D010000F4010000
+        
+        
+          16
+          70000000870000002C010000E9010000
+        
+      
+      
+        38007
+        38007
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          0300000028020000FD04000065020000
+        
+        
+          16
+          700000008700000048020000DF000000
+        
+      
+      
+        436
+        436
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          0300000028020000FD04000065020000
+        
+        
+          16
+          70000000870000002C010000E9010000
+        
+      
+      
+        437
+        437
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        440
+        440
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000052010000AD0300008E010000
+        
+        
+          16
+          70000000870000000002000017020000
+        
+      
+      
+        59392
+        59392
+        1
+        0
+        0
+        0
+        940
+        0
+        8192
+        0
+        
+          16
+          0000000000000000B70300001C000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59393
+        0
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          000000007E0200000005000091020000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59399
+        59399
+        1
+        0
+        0
+        0
+        463
+        0
+        8192
+        1
+        
+          16
+          000000001C000000DA01000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59400
+        59400
+        0
+        0
+        0
+        0
+        612
+        0
+        8192
+        2
+        
+          16
+          00000000380000006F02000054000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2619
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
+      
+      
+        59392
+        File
+        
+          2231
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
+        
+        
+          1423
+          2800FFFF01001100434D4643546F6F6C426172427574746F6E00E1000000000000FFFFFFFF000100000000000000010000000000000001000000018001E1000000000000FFFFFFFF000100000000000000010000000000000001000000018003E1000000000000FFFFFFFF0001000000000000000100000000000000010000000180CD7F000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF000000000000000000010000000000000001000000018023E1000000000000FFFFFFFF000100000000000000010000000000000001000000018022E1000000000000FFFFFFFF000100000000000000010000000000000001000000018025E1000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001802BE1000000000000FFFFFFFF00010000000000000001000000000000000100000001802CE1000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001807A8A000000000000FFFFFFFF00010000000000000001000000000000000100000001807B8A000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180D3B0000000000000FFFFFFFF000100000000000000010000000000000001000000018015B1000000000000FFFFFFFF0001000000000000000100000000000000010000000180F4B0000000000000FFFFFFFF000100000000000000010000000000000001000000018036B1000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180FF88000000000000FFFFFFFF0001000000000000000100000000000000010000000180FE88000000000000FFFFFFFF00010000000000000001000000000000000100000001800B81000000000000FFFFFFFF00010000000000000001000000000000000100000001800C81000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180F088000000000000FFFFFFFF0001000000000000000100000000000000010000000180EE7F000000000000FFFFFFFF000100000000000000010000000000000001000000018024E1000000000000FFFFFFFF00010000000000000001000000000000000100000001800A81000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001802280000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180C488000000000000FFFFFFFF0001000000000000000100000000000000010000000180C988000000000000FFFFFFFF0001000000000000000100000000000000010000000180C788000000000000FFFFFFFF0001000000000000000100000000000000010000000180C888000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180DD88000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180FB7F000000000000FFFFFFFF000100000000000000010000000000000001000000
+        
+        
+          1423
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
+        
+      
+      
+        59399
+        Build
+        
+          676
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
+        
+        
+          583
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
+        
+        
+          583
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
+        
+      
+      
+        59400
+        Debug
+        
+          2220
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
+        
+        
+          898
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
+        
+        
+          898
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
+        
+      
+      
+        0
+        1280
+        720
+      
+    
+    
+      1
+      Debug
+      
+        -1
+        -1
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          940100004F00000000050000B3000000
+        
+        
+          16
+          940100006600000000050000CA000000
+        
+      
+      
+        1005
+        1005
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000008D010000F5010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        109
+        109
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000008D010000F5010000
+        
+        
+          16
+          8A000000A10000004601000003020000
+        
+      
+      
+        1465
+        1465
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        1466
+        1466
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        1467
+        1467
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        1468
+        1468
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        1506
+        1506
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        1913
+        1913
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9701000066000000FD0400009A000000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        1935
+        1935
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        1936
+        1936
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        1937
+        1937
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        1939
+        1939
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        1940
+        1940
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        1941
+        1941
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        1942
+        1942
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        195
+        195
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000008D010000F5010000
+        
+        
+          16
+          8A000000A10000004601000003020000
+        
+      
+      
+        196
+        196
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000008D010000F5010000
+        
+        
+          16
+          8A000000A10000004601000003020000
+        
+      
+      
+        197
+        197
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          030000005A010000AD0300008E010000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        198
+        198
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          0000000012020000800200007E020000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        199
+        199
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000005A010000AD0300008E010000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        203
+        203
+        0
+        0
+        0
+        0
+        32767
+        0
+        8192
+        0
+        
+          16
+          9701000066000000FD0400009A000000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        204
+        204
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9701000066000000FD0400009A000000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        221
+        221
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000000000000000000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2506
+        2506
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        2507
+        2507
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        343
+        343
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9701000066000000FD0400009A000000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        346
+        346
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9701000066000000FD0400009A000000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        35824
+        35824
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          9701000066000000FD0400009A000000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        35885
+        35885
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35886
+        35886
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35887
+        35887
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35888
+        35888
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35889
+        35889
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35890
+        35890
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35891
+        35891
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35892
+        35892
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35893
+        35893
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35894
+        35894
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35895
+        35895
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35896
+        35896
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35897
+        35897
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35898
+        35898
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35899
+        35899
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35900
+        35900
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35901
+        35901
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35902
+        35902
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35903
+        35903
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35904
+        35904
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        35905
+        35905
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          2302000066000000AD03000026010000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        38003
+        38003
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000660000008D010000F5010000
+        
+        
+          16
+          8A000000A10000004601000003020000
+        
+      
+      
+        38007
+        38007
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000005A010000AD0300008E010000
+        
+        
+          16
+          8A000000A100000062020000F9000000
+        
+      
+      
+        436
+        436
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000005A010000AD0300008E010000
+        
+        
+          16
+          8A000000A10000004601000003020000
+        
+      
+      
+        437
+        437
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        440
+        440
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          8702000029020000FD04000065020000
+        
+        
+          16
+          8A000000A10000001A02000031020000
+        
+      
+      
+        59392
+        59392
+        1
+        0
+        0
+        0
+        940
+        0
+        8192
+        0
+        
+          16
+          0000000000000000B70300001C000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59393
+        0
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          000000007E0200000005000091020000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59399
+        59399
+        0
+        0
+        0
+        0
+        463
+        0
+        8192
+        1
+        
+          16
+          000000001C000000DA01000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59400
+        59400
+        1
+        0
+        0
+        0
+        612
+        0
+        8192
+        2
+        
+          16
+          000000001C0000006F02000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2618
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
+      
+      
+        59392
+        File
+        
+          2211
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
+        
+        
+          1423
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
+        
+        
+          1423
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
+        
+      
+      
+        59399
+        Build
+        
+          657
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
+        
+        
+          583
+          1000FFFF01001100434D4643546F6F6C426172427574746F6ECF7F000000000000FFFFFFFF0001000000000000000100000000000000010000000180D07F000000000000FFFFFFFF00010000000000000001000000000000000100000001803080000000000000FFFFFFFF00010000000000000001000000000000000100000001809E8A000000000000FFFFFFFF0001000000000000000100000000000000010000000180D17F000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001804C8A000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF00000000000000000001000000000000000100000001806680000000000000FFFFFFFF0001000000000000000100000000000000010000000180EB88000000000000FFFFFFFF00010000000000000001000000000000000100000001800000000000000000FFFFFFFF0000000000000000000100000000000000010000000180C07F000000000000FFFFFFFF0001000000000000000100000000000000010000000180B08A000000000000FFFFFFFF0001000000000000000100000000000000010000000180A801000000000000FFFFFFFF00010000000000000001000000000000000100000001807202000000000000FFFFFFFF0001000000000000000100000000000000010000000180BE01000000000000FFFFFFFF000100000000000000010000000000000001000000
+        
+        
+          583
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
+        
+      
+      
+        59400
+        Debug
+        
+          2220
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
+        
+        
+          898
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
+        
+        
+          898
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
+        
+      
+      
+        0
+        1280
+        720
+      
+    
+  
+
+  
+    1
+    0
+    
+      100
+      1
+      
+        ..\User\main.c
+        0
+        13
+        33
+        1
+        
+        0
+      
+      
+        ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s
+        0
+        124
+        134
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\MOTO\car.c
+        20
+        12
+        25
+        0
+        
+        0
+      
+      
+        ..\DRV\bsp_usart.c
+        0
+        1
+        1
+        1
+        
+        0
+      
+      
+        ..\DRV\bsp_timer.c
+        0
+        69
+        96
+        1
+        
+        0
+      
+      
+        ..\DRV\bsp_NVIC.C
+        0
+        14
+        42
+        1
+        
+        0
+      
+      
+        ..\DRV\bsp_GPIO.c
+        0
+        17
+        42
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\OLED\oled.c
+        0
+        1
+        1
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\MOTO\car.h
+        0
+        1
+        1
+        1
+        
+        0
+      
+      
+        ..\DRV\bsp_timer.h
+        0
+        1
+        1
+        1
+        
+        0
+      
+      
+        ..\DRV\bsp_sys.c
+        22
+        12
+        40
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\PID\pid.c
+        0
+        1
+        1
+        0
+        
+        0
+      
+      
+        ..\HARDWARE\MOTO\moto.c
+        87
+        42
+        43
+        1
+        
+        0
+      
+      
+        ..\DRV\bsp_GPIO.h
+        0
+        11
+        15
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\PID\pid.h
+        0
+        1
+        1
+        0
+        
+        0
+      
+      
+        ..\HARDWARE\OLED\oled.h
+        5
+        21
+        39
+        1
+        
+        0
+      
+      
+        ..\HARDWARE\MOTO\moto.h
+        16
+        1
+        1
+        1
+        
+        0
+      
+      
+        ..\DRV\bsp_iic.c
+        0
+        109
+        110
+        1
+        
+        0
+      
+    
+  
+
+    
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvopt b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvopt
new file mode 100644
index 0000000..e579134
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvopt	
@@ -0,0 +1,926 @@
+
+
+
+  1.0
+
+  
    ### uVision Project, (C) Keil Software
    
+
+  
+    *.c
+    *.s*; *.src; *.a*
+    *.obj
+    *.lib
+    *.txt; *.h; *.inc
+    *.plm
+    *.cpp
+  
+
+  
+    0
+    0
+  
+
+  
+    PROJECT
+    0x4
+    ARM-ADS
+    
+      8000000
+      
+        1
+        1
+        1
+        0
+      
+      
+        1
+        65535
+        0
+        0
+        0
+      
+      
+        79
+        66
+        8
+        ..\Listing\
+      
+      
+        1
+        1
+        1
+        0
+        1
+        1
+        0
+        1
+        0
+        0
+        0
+        0
+      
+      
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        0
+        0
+      
+      
+        1
+        0
+        1
+      
+      255
+      
+        
+          0
+          Reference Manual
+          DATASHTS\ST\STM32F10xxx.PDF
+        
+      
+      
+        SARMCM3.DLL
+        
+        DARMSTM.DLL
+        -pSTM32F103C8
+        SARMCM3.DLL
+        
+        TARMSTM.DLL
+        -pSTM32F103C8
+      
+      
+        0
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        0
+        1
+        0
+        0
+        0
+        7
+        
+        
+        
+        
+        
+        
+        
+        
+        
+        
+        Segger\JL2CM3.dll
+      
+      
+        
+          0
+          DLGTARM
+          (1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=-1,-1,-1,-1,0)(121=-1,-1,-1,-1,0)(122=-1,-1,-1,-1,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)
+        
+        
+          0
+          DLGUARM
+          /
+        
+        
+          0
+          ST-LINKIII-KEIL
+          -S
+        
+        
+          0
+          JL2CM3
+          -U20090928 -O78 -S1 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000
+        
+        
+          0
+          DLGDARM
+          (1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=-1,-1,-1,-1,0)(121=-1,-1,-1,-1,0)(122=-1,-1,-1,-1,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(234=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)
+        
+        
+          0
+          ARMDBGFLAGS
+          -T0
+        
+        
+          0
+          UL2CM3
+          -O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL010000)
+        
+      
+      
+        
+          0
+          0
+          45
+          1
+          
    0
    
+          0
+          0
+          0
+          0
+          0
+          0
+          C:\Users\Administrator\Desktop\TX\User\main.c
+          
+          
+            
+        
+          1
+          0
+          57
+          1
+          
    0
    
+          0
+          0
+          0
+          0
+          0
+          0
+          C:\Users\Administrator\Desktop\TX\User\main.c
+          
+          
+            
+        
+          2
+          0
+          72
+          1
+          
    0
    
+          0
+          0
+          0
+          0
+          0
+          0
+          C:\Users\Administrator\Desktop\TX\User\main.c
+          
+          
+            
+          
+      
+        
+          0
+          1
+          rx_buf
+        
+        
+          1
+          1
+          rx_buf
+        
+      
+      
+        0
+      
+      
+        0
+        1
+        0
+        0
+        0
+        0
+        0
+        1
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+      
+      
+      
+        
+      
+
+  
+    STARTUP
+    0
+    0
+    0
+    0
+    
+      1
+      1
+      2
+      0
+      0
+      0
+      0
+      120
+      133
+      0
+      ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s
+      startup_stm32f10x_md.s
+      0
+      0
+    
+  
+
+  
+    CMSIS
+    0
+    0
+    0
+    0
+    
+      2
+      2
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\CMSIS\core_cm3.c
+      core_cm3.c
+      0
+      0
+    
+    
+      2
+      3
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\CMSIS\system_stm32f10x.c
+      system_stm32f10x.c
+      0
+      0
+    
+  
+
+  
+    FWlib
+    0
+    0
+    0
+    0
+    
+      3
+      4
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\misc.c
+      misc.c
+      0
+      0
+    
+    
+      3
+      5
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_adc.c
+      stm32f10x_adc.c
+      0
+      0
+    
+    
+      3
+      6
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_bkp.c
+      stm32f10x_bkp.c
+      0
+      0
+    
+    
+      3
+      7
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_can.c
+      stm32f10x_can.c
+      0
+      0
+    
+    
+      3
+      8
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_cec.c
+      stm32f10x_cec.c
+      0
+      0
+    
+    
+      3
+      9
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_crc.c
+      stm32f10x_crc.c
+      0
+      0
+    
+    
+      3
+      10
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_dac.c
+      stm32f10x_dac.c
+      0
+      0
+    
+    
+      3
+      11
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_dbgmcu.c
+      stm32f10x_dbgmcu.c
+      0
+      0
+    
+    
+      3
+      12
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_dma.c
+      stm32f10x_dma.c
+      0
+      0
+    
+    
+      3
+      13
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_exti.c
+      stm32f10x_exti.c
+      0
+      0
+    
+    
+      3
+      14
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_flash.c
+      stm32f10x_flash.c
+      0
+      0
+    
+    
+      3
+      15
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_fsmc.c
+      stm32f10x_fsmc.c
+      0
+      0
+    
+    
+      3
+      16
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_gpio.c
+      stm32f10x_gpio.c
+      0
+      0
+    
+    
+      3
+      17
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_i2c.c
+      stm32f10x_i2c.c
+      0
+      0
+    
+    
+      3
+      18
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_iwdg.c
+      stm32f10x_iwdg.c
+      0
+      0
+    
+    
+      3
+      19
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_pwr.c
+      stm32f10x_pwr.c
+      0
+      0
+    
+    
+      3
+      20
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_rcc.c
+      stm32f10x_rcc.c
+      0
+      0
+    
+    
+      3
+      21
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_rtc.c
+      stm32f10x_rtc.c
+      0
+      0
+    
+    
+      3
+      22
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_sdio.c
+      stm32f10x_sdio.c
+      0
+      0
+    
+    
+      3
+      23
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_spi.c
+      stm32f10x_spi.c
+      0
+      0
+    
+    
+      3
+      24
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_tim.c
+      stm32f10x_tim.c
+      0
+      0
+    
+    
+      3
+      25
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_usart.c
+      stm32f10x_usart.c
+      0
+      0
+    
+    
+      3
+      26
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_wwdg.c
+      stm32f10x_wwdg.c
+      0
+      0
+    
+  
+
+  
+    DRV
+    1
+    0
+    0
+    0
+    
+      4
+      27
+      1
+      0
+      0
+      23
+      0
+      13
+      76
+      0
+      ..\DRV\delay\delay.c
+      delay.c
+      0
+      0
+    
+    
+      4
+      28
+      1
+      0
+      0
+      5
+      0
+      0
+      0
+      0
+      ..\DRV\NVIC\bsp_NVIC.C
+      bsp_NVIC.C
+      0
+      0
+    
+    
+      4
+      29
+      1
+      0
+      0
+      0
+      0
+      199
+      200
+      0
+      ..\DRV\iic\bsp_iic.c
+      bsp_iic.c
+      0
+      0
+    
+    
+      4
+      30
+      1
+      0
+      0
+      7
+      0
+      1
+      27
+      0
+      ..\DRV\GPIO\bsp_GPIO.c
+      bsp_GPIO.c
+      0
+      0
+    
+    
+      4
+      31
+      1
+      0
+      0
+      61
+      0
+      0
+      0
+      0
+      ..\DRV\usart\bsp_usart.c
+      bsp_usart.c
+      0
+      0
+    
+    
+      4
+      32
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\DRV\SPI\bsp_spi.c
+      bsp_spi.c
+      0
+      0
+    
+  
+
+  
+    HARDWARE
+    1
+    0
+    0
+    0
+    
+      5
+      33
+      1
+      0
+      0
+      0
+      0
+      1
+      1
+      0
+      ..\HARDWARE\24CXX\24cxx.c
+      24cxx.c
+      0
+      0
+    
+    
+      5
+      34
+      1
+      0
+      0
+      2
+      0
+      7
+      10
+      0
+      ..\HARDWARE\OLED\oled.c
+      oled.c
+      0
+      0
+    
+    
+      5
+      35
+      1
+      0
+      0
+      13
+      0
+      31
+      38
+      0
+      ..\HARDWARE\24L01\24l01.c
+      24l01.c
+      0
+      0
+    
+  
+
+  
+    USER
+    1
+    0
+    0
+    0
+    
+      6
+      36
+      1
+      0
+      0
+      41
+      0
+      50
+      85
+      0
+      ..\User\main.c
+      main.c
+      0
+      0
+    
+    
+      6
+      37
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\User\stm32f10x_it.c
+      stm32f10x_it.c
+      0
+      0
+    
+  
+
+  
+    DOC
+    0
+    0
+    0
+    0
+    
+      7
+      38
+      5
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Doc\readme.txt
+      readme.txt
+      0
+      0
+    
+  
+
+    
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvoptx b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvoptx
new file mode 100644
index 0000000..2c070ee
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvoptx	
@@ -0,0 +1,800 @@
+
+
+
+  1.0
+
+  
    ### uVision Project, (C) Keil Software
    
+
+  
+    *.c
+    *.s*; *.src; *.a*
+    *.obj
+    *.lib
+    *.txt; *.h; *.inc
+    *.plm
+    *.cpp
+    0
+  
+
+  
+    0
+    0
+  
+
+  
+    PROJECT
+    0x4
+    ARM-ADS
+    
+      12000000
+      
+        1
+        1
+        1
+        0
+        0
+      
+      
+        1
+        65535
+        0
+        0
+        0
+      
+      
+        79
+        66
+        8
+        ..\Listing\
+      
+      
+        1
+        1
+        1
+        0
+        1
+        1
+        0
+        1
+        0
+        0
+        0
+        0
+      
+      
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        0
+        0
+      
+      
+        1
+        0
+        1
+      
+      18
+      
+        
+          0
+          Base Board Schematics (MCBSTM32E)
+          D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Documents\mcbstm32e-base-board-schematics.pdf
+        
+        
+          1
+          Display Board Schematics (MCBSTM32E)
+          D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Documents\mcbstm32e-display-board-schematics.pdf
+        
+        
+          2
+          User Manual (MCBSTM32E)
+          D:\Program Files\Keilv5\ARM\PACK\Keil\STM32F1xx_DFP\1.1.0\Documents\mcbstm32e.chm
+        
+        
+          3
+          MCBSTM32E Evaluation Board Web Page (MCBSTM32E)
+          http://www.keil.com/mcbstm32e/
+        
+      
+      
+        0
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        0
+        1
+        0
+        1
+        1
+        0
+        0
+        5
+        
+        
+        
+        
+        
+        
+        
+        
+        
+        
+        STLink\ST-LINKIII-KEIL_SWO.dll
+      
+      
+        
+          0
+          ST-LINKIII-KEIL_SWO
+          -U610024000F0000315151524E -O78 -S1 -C0 -A0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8004 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F103RC$Flash\STM32F10x_512.FLM)
+        
+        
+          0
+          DLGUARM
+          
+        
+        
+          0
+          CMSIS_AGDI
+          -X"CMSIS-DAP" -U0001A0000000 -O206 -S0 -C0 -P00 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F103RC$Flash\STM32F10x_512.FLM)
+        
+        
+          0
+          ARMRTXEVENTFLAGS
+          -L70 -Z18 -C0 -M0 -T1
+        
+        
+          0
+          DLGTARM
+          (1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)
+        
+        
+          0
+          ST-LINKIII-KEIL
+          -S
+        
+        
+          0
+          JL2CM3
+          -U20090928 -O78 -S3 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8008 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F103RC$Flash\STM32F10x_512.FLM)
+        
+        
+          0
+          DLGDARM
+          (1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=-1,-1,-1,-1,0)(121=-1,-1,-1,-1,0)(122=-1,-1,-1,-1,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(234=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)
+        
+        
+          0
+          ARMDBGFLAGS
+          -T0
+        
+        
+          0
+          UL2CM3
+          -O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7  -FN1 -FC1000 -FD20000000 -FF0STM32F10x_512 -FL080000 -FS08000000 -FP0($$Device:STM32F103RC$Flash\STM32F10x_512.FLM)
+        
+      
+      
+      
+        
+          0
+          1
+          rx_buf
+        
+        
+          1
+          1
+          rx_buf
+        
+        
+          2
+          1
+          adc_bat
+        
+        
+          3
+          1
+          adc[0]
+        
+        
+          4
+          1
+          adc[0]
+        
+        
+          5
+          1
+          adc[1]
+        
+        
+          6
+          1
+          temp_val
+        
+      
+      
+        0
+      
+      
+        0
+        1
+        0
+        0
+        0
+        0
+        0
+        1
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+      
+      
+      
+      0
+      
+      
+      0
+      
+        1
+        0
+        2
+        10000000
+      
+    
+  
+
+  
+    STARTUP
+    1
+    0
+    0
+    0
+    
+      1
+      1
+      2
+      0
+      0
+      0
+      ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s
+      startup_stm32f10x_hd.s
+      0
+      0
+    
+  
+
+  
+    CMSIS
+    1
+    0
+    0
+    0
+    
+      2
+      2
+      1
+      0
+      0
+      0
+      ..\Libraries\CMSIS\core_cm3.c
+      core_cm3.c
+      0
+      0
+    
+    
+      2
+      3
+      1
+      0
+      0
+      0
+      ..\Libraries\CMSIS\system_stm32f10x.c
+      system_stm32f10x.c
+      0
+      0
+    
+  
+
+  
+    FWlib
+    0
+    0
+    0
+    0
+    
+      3
+      4
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\misc.c
+      misc.c
+      0
+      0
+    
+    
+      3
+      5
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_adc.c
+      stm32f10x_adc.c
+      0
+      0
+    
+    
+      3
+      6
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_bkp.c
+      stm32f10x_bkp.c
+      0
+      0
+    
+    
+      3
+      7
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_can.c
+      stm32f10x_can.c
+      0
+      0
+    
+    
+      3
+      8
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_cec.c
+      stm32f10x_cec.c
+      0
+      0
+    
+    
+      3
+      9
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_crc.c
+      stm32f10x_crc.c
+      0
+      0
+    
+    
+      3
+      10
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_dac.c
+      stm32f10x_dac.c
+      0
+      0
+    
+    
+      3
+      11
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_dbgmcu.c
+      stm32f10x_dbgmcu.c
+      0
+      0
+    
+    
+      3
+      12
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_dma.c
+      stm32f10x_dma.c
+      0
+      0
+    
+    
+      3
+      13
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_exti.c
+      stm32f10x_exti.c
+      0
+      0
+    
+    
+      3
+      14
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_flash.c
+      stm32f10x_flash.c
+      0
+      0
+    
+    
+      3
+      15
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_fsmc.c
+      stm32f10x_fsmc.c
+      0
+      0
+    
+    
+      3
+      16
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_gpio.c
+      stm32f10x_gpio.c
+      0
+      0
+    
+    
+      3
+      17
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_i2c.c
+      stm32f10x_i2c.c
+      0
+      0
+    
+    
+      3
+      18
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_iwdg.c
+      stm32f10x_iwdg.c
+      0
+      0
+    
+    
+      3
+      19
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_pwr.c
+      stm32f10x_pwr.c
+      0
+      0
+    
+    
+      3
+      20
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_rcc.c
+      stm32f10x_rcc.c
+      0
+      0
+    
+    
+      3
+      21
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_rtc.c
+      stm32f10x_rtc.c
+      0
+      0
+    
+    
+      3
+      22
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_sdio.c
+      stm32f10x_sdio.c
+      0
+      0
+    
+    
+      3
+      23
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_spi.c
+      stm32f10x_spi.c
+      0
+      0
+    
+    
+      3
+      24
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_tim.c
+      stm32f10x_tim.c
+      0
+      0
+    
+    
+      3
+      25
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_usart.c
+      stm32f10x_usart.c
+      0
+      0
+    
+    
+      3
+      26
+      1
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_wwdg.c
+      stm32f10x_wwdg.c
+      0
+      0
+    
+  
+
+  
+    DRV
+    1
+    0
+    0
+    0
+    
+      4
+      27
+      1
+      0
+      0
+      0
+      ..\DRV\bsp_sys.c
+      bsp_sys.c
+      0
+      0
+    
+    
+      4
+      28
+      1
+      0
+      0
+      0
+      ..\DRV\bsp_GPIO.c
+      bsp_GPIO.c
+      0
+      0
+    
+    
+      4
+      29
+      1
+      0
+      0
+      0
+      ..\DRV\bsp_NVIC.C
+      bsp_NVIC.C
+      0
+      0
+    
+    
+      4
+      30
+      1
+      0
+      0
+      0
+      ..\DRV\bsp_usart.c
+      bsp_usart.c
+      0
+      0
+    
+    
+      4
+      31
+      1
+      0
+      0
+      0
+      ..\DRV\delay.c
+      delay.c
+      0
+      0
+    
+    
+      4
+      32
+      1
+      0
+      0
+      0
+      ..\DRV\bsp_iic.c
+      bsp_iic.c
+      0
+      0
+    
+    
+      4
+      33
+      1
+      0
+      0
+      0
+      ..\DRV\bsp_timer.c
+      bsp_timer.c
+      0
+      0
+    
+  
+
+  
+    HARDWARE
+    1
+    0
+    0
+    0
+    
+      5
+      34
+      1
+      0
+      0
+      0
+      ..\HARDWARE\MOTO\moto.c
+      moto.c
+      0
+      0
+    
+    
+      5
+      35
+      1
+      0
+      0
+      0
+      ..\HARDWARE\OLED\oled.c
+      oled.c
+      0
+      0
+    
+    
+      5
+      36
+      1
+      0
+      0
+      0
+      ..\HARDWARE\PID\pid.c
+      pid.c
+      0
+      0
+    
+    
+      5
+      37
+      1
+      0
+      0
+      0
+      ..\HARDWARE\MOTO\car.c
+      car.c
+      0
+      0
+    
+    
+      5
+      38
+      1
+      0
+      0
+      0
+      ..\HARDWARE\MOTO\bluetooth.c
+      bluetooth.c
+      0
+      0
+    
+  
+
+  
+    USER
+    1
+    0
+    0
+    0
+    
+      6
+      39
+      1
+      0
+      0
+      0
+      ..\User\main.c
+      main.c
+      0
+      0
+    
+    
+      6
+      40
+      1
+      0
+      0
+      0
+      ..\User\stm32f10x_it.c
+      stm32f10x_it.c
+      0
+      0
+    
+  
+
+    
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvproj.saved_uv4 b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvproj.saved_uv4
new file mode 100644
index 0000000..b3ecdd7
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvproj.saved_uv4	
@@ -0,0 +1,621 @@
+
+
+
+  1.1
+
+  
    ### uVision Project, (C) Keil Software
    
+
+  
+    
+      PROJECT
+      0x4
+      ARM-ADS
+      
+        
+          STM32F103C8
+          STMicroelectronics
+          IRAM(0x20000000-0x20004FFF) IROM(0x8000000-0x800FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3")
+          
+          "STARTUP\ST\STM32F10x.s" ("STM32 Startup Code")
+          UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL010000)
+          4235
+          stm32f10x_lib.h
+          
+          
+          
+          
+          
+          
+          
+          
+          
+          
+          0
+          
+          
+          
+          ST\STM32F10x\
+          ST\STM32F10x\
+          
+            0
+            0
+            0
+            0
+            1
+          
+          ..\Output\
+          Project
+          1
+          0
+          1
+          1
+          1
+          ..\Listing\
+          1
+          0
+          0
+          
+            0
+            0
+            
+            
+            0
+            0
+            0
+            0
+          
+          
+            0
+            0
+            
+            
+            0
+            0
+          
+          
+            0
+            0
+            
+            
+            0
+            0
+          
+          0
+          
+        
+        
+          0
+          0
+          0
+          0
+          0
+          1
+          0
+          0
+          0
+          0
+          3
+          
+          
+        
+        
+          SARMCM3.DLL
+          
+          DARMSTM.DLL
+          -pSTM32F103C8
+          SARMCM3.DLL
+          
+          TARMSTM.DLL
+          -pSTM32F103C8
+        
+        
+          
+            1
+            0
+            0
+            0
+            16
+          
+          
+            0
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            0
+          
+          
+            1
+            1
+            1
+            1
+            1
+            1
+            0
+            1
+            0
+          
+          0
+          7
+          
+            
+            
+            
+            
+            
+          
+          
+            
+            
+            
+            
+            
+            Segger\JL2CM3.dll
+          
+        
+        
+          
+            1
+            0
+            0
+            1
+            1
+            4099
+          
+          0
+          Segger\JL2CM3.dll
+          "" ()
+          
+        
+        
+          
+            0
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            0
+            1
+            1
+            0
+            1
+            1
+            0
+            0
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            0
+            0
+            "Cortex-M3"
+            
+            0
+            0
+            0
+            1
+            1
+            0
+            0
+            0
+            0
+            0
+            8
+            0
+            0
+            0
+            3
+            3
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            1
+            0
+            0
+            0
+            0
+            1
+            0
+            
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x20000000
+                0x5000
+              
+              
+                1
+                0x8000000
+                0x10000
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                1
+                0x8000000
+                0x10000
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x20000000
+                0x5000
+              
+              
+                0
+                0x0
+                0x0
+              
+            
+            
+          
+          
+            1
+            1
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            
+              
+              STM32F10X_MD, USE_STDPERIPH_DRIVER
+              
+              ..\Libraries\CMSIS;..\Libraries\FWlib\inc;..\Libraries\FWlib\src;..\User;..\DRV\SysTick;..\DRV\delay;..\DRV\usart;..\DRV\NVIC;..\DRV\iic;..\DRV\GPIO;..\HARDWARE\24CXX;..\HARDWARE\OLED;..\HARDWARE\24L01;..\DRV\SPI
+            
+          
+          
+            1
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            
+              
+              
+              
+              
+            
+          
+          
+            1
+            0
+            0
+            0
+            1
+            0
+            0x08000000
+            0x20000000
+            
+            
+            
+            
+            
+            
+          
+        
+      
+      
+        
+          STARTUP
+          
+            
+              startup_stm32f10x_md.s
+              2
+              ..\Libraries\CMSIS\startup\startup_stm32f10x_md.s
+            
+          
+        
+        
+          CMSIS
+          
+            
+              core_cm3.c
+              1
+              ..\Libraries\CMSIS\core_cm3.c
+            
+            
+              system_stm32f10x.c
+              1
+              ..\Libraries\CMSIS\system_stm32f10x.c
+            
+          
+        
+        
+          FWlib
+          
+            
+              misc.c
+              1
+              ..\Libraries\FWlib\src\misc.c
+            
+            
+              stm32f10x_adc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_adc.c
+            
+            
+              stm32f10x_bkp.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_bkp.c
+            
+            
+              stm32f10x_can.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_can.c
+            
+            
+              stm32f10x_cec.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_cec.c
+            
+            
+              stm32f10x_crc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_crc.c
+            
+            
+              stm32f10x_dac.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_dac.c
+            
+            
+              stm32f10x_dbgmcu.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_dbgmcu.c
+            
+            
+              stm32f10x_dma.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_dma.c
+            
+            
+              stm32f10x_exti.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_exti.c
+            
+            
+              stm32f10x_flash.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_flash.c
+            
+            
+              stm32f10x_fsmc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_fsmc.c
+            
+            
+              stm32f10x_gpio.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_gpio.c
+            
+            
+              stm32f10x_i2c.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_i2c.c
+            
+            
+              stm32f10x_iwdg.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_iwdg.c
+            
+            
+              stm32f10x_pwr.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_pwr.c
+            
+            
+              stm32f10x_rcc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_rcc.c
+            
+            
+              stm32f10x_rtc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_rtc.c
+            
+            
+              stm32f10x_sdio.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_sdio.c
+            
+            
+              stm32f10x_spi.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_spi.c
+            
+            
+              stm32f10x_tim.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_tim.c
+            
+            
+              stm32f10x_usart.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_usart.c
+            
+            
+              stm32f10x_wwdg.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_wwdg.c
+            
+          
+        
+        
+          DRV
+          
+            
+              delay.c
+              1
+              ..\DRV\delay\delay.c
+            
+            
+              bsp_NVIC.C
+              1
+              ..\DRV\NVIC\bsp_NVIC.C
+            
+            
+              bsp_iic.c
+              1
+              ..\DRV\iic\bsp_iic.c
+            
+            
+              bsp_GPIO.c
+              1
+              ..\DRV\GPIO\bsp_GPIO.c
+            
+            
+              bsp_usart.c
+              1
+              ..\DRV\usart\bsp_usart.c
+            
+            
+              bsp_spi.c
+              1
+              ..\DRV\SPI\bsp_spi.c
+            
+          
+        
+        
+          HARDWARE
+          
+            
+              24cxx.c
+              1
+              ..\HARDWARE\24CXX\24cxx.c
+            
+            
+              oled.c
+              1
+              ..\HARDWARE\OLED\oled.c
+            
+            
+              24l01.c
+              1
+              ..\HARDWARE\24L01\24l01.c
+            
+          
+        
+        
+          USER
+          
+            
+              main.c
+              1
+              ..\User\main.c
+            
+            
+              stm32f10x_it.c
+              1
+              ..\User\stm32f10x_it.c
+            
+          
+        
+        
+          DOC
+          
+            
+              readme.txt
+              5
+              ..\Doc\readme.txt
+            
+          
+        
+      
+    
+  
+
+    
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvprojx b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvprojx
new file mode 100644
index 0000000..7b34202
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project.uvprojx	
@@ -0,0 +1,613 @@
+
+
+
+  2.1
+
+  
    ### uVision Project, (C) Keil Software
    
+
+  
+    
+      PROJECT
+      0x4
+      ARM-ADS
+      5060300::V5.06 update 3 (build 300)::ARMCC
+      
+        
+          STM32F103RC
+          STMicroelectronics
+          Keil.STM32F1xx_DFP.1.1.0
+          http://www.keil.com/pack/
+          IROM(0x08000000,0x40000) IRAM(0x20000000,0xC000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE
+          
+          
+          UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000 -FP0($$Device:STM32F103RC$Flash\STM32F10x_512.FLM))
+          0
+          $$Device:STM32F103RC$Device\Include\stm32f10x.h
+          
+          
+          
+          
+          
+          
+          
+          
+          
+          $$Device:STM32F103RC$SVD\STM32F103xx.svd
+          0
+          0
+          
+          
+          
+          
+          
+          
+            0
+            0
+            0
+            0
+            1
+          
+          ..\Output\
+          Project
+          1
+          0
+          1
+          1
+          1
+          ..\Listing\
+          1
+          0
+          0
+          
+            0
+            0
+            
+            
+            0
+            0
+            0
+            0
+          
+          
+            0
+            0
+            
+            
+            0
+            0
+            0
+            0
+          
+          
+            0
+            0
+            
+            
+            0
+            0
+            0
+            0
+          
+          0
+          
+        
+        
+          0
+          0
+          0
+          0
+          0
+          1
+          0
+          0
+          0
+          0
+          3
+          
+          
+          1
+        
+        
+          SARMCM3.DLL
+           -REMAP
+          DCM.DLL
+          -pCM3
+          SARMCM3.DLL
+          
+          TCM.DLL
+          -pCM3
+        
+        
+          
+            1
+            0
+            0
+            0
+            16
+          
+        
+        
+          
+            1
+            0
+            0
+            1
+            1
+            4099
+          
+          1
+          Segger\JL2CM3.dll
+          "" ()
+          
+          
+          
+          
+          0
+        
+        
+          
+            0
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            0
+            1
+            1
+            0
+            1
+            1
+            0
+            0
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            0
+            0
+            "Cortex-M3"
+            
+            0
+            0
+            0
+            1
+            1
+            0
+            0
+            0
+            0
+            0
+            8
+            0
+            0
+            0
+            0
+            3
+            3
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            1
+            0
+            0
+            0
+            0
+            1
+            0
+            
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x20000000
+                0xc000
+              
+              
+                1
+                0x8000000
+                0x40000
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                1
+                0x8000000
+                0x40000
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x20000000
+                0xc000
+              
+              
+                0
+                0x0
+                0x0
+              
+            
+            
+          
+          
+            1
+            1
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            1
+            0
+            1
+            1
+            1
+            1
+            0
+            0
+            0
+            
+              
+              USE_STDPERIPH_DRIVER
+              
+              ..\Libraries\CMSIS;..\Libraries\FWlib\inc;..\Libraries\FWlib\src;..\User;..\DRV;..\HARDWARE;..\HARDWARE\MOTO;..\HARDWARE\OLED;..\HARDWARE\PID
+            
+          
+          
+            1
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            
+              
+              
+              
+              
+            
+          
+          
+            1
+            0
+            0
+            0
+            1
+            0
+            0x08000000
+            0x20000000
+            
+            
+            
+            
+            
+            
+            
+          
+        
+      
+      
+        
+          STARTUP
+          
+            
+              startup_stm32f10x_hd.s
+              2
+              ..\Libraries\CMSIS\startup\startup_stm32f10x_hd.s
+            
+          
+        
+        
+          CMSIS
+          
+            
+              core_cm3.c
+              1
+              ..\Libraries\CMSIS\core_cm3.c
+            
+            
+              system_stm32f10x.c
+              1
+              ..\Libraries\CMSIS\system_stm32f10x.c
+            
+          
+        
+        
+          FWlib
+          
+            
+              misc.c
+              1
+              ..\Libraries\FWlib\src\misc.c
+            
+            
+              stm32f10x_adc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_adc.c
+            
+            
+              stm32f10x_bkp.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_bkp.c
+            
+            
+              stm32f10x_can.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_can.c
+            
+            
+              stm32f10x_cec.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_cec.c
+            
+            
+              stm32f10x_crc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_crc.c
+            
+            
+              stm32f10x_dac.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_dac.c
+            
+            
+              stm32f10x_dbgmcu.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_dbgmcu.c
+            
+            
+              stm32f10x_dma.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_dma.c
+            
+            
+              stm32f10x_exti.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_exti.c
+            
+            
+              stm32f10x_flash.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_flash.c
+            
+            
+              stm32f10x_fsmc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_fsmc.c
+            
+            
+              stm32f10x_gpio.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_gpio.c
+            
+            
+              stm32f10x_i2c.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_i2c.c
+            
+            
+              stm32f10x_iwdg.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_iwdg.c
+            
+            
+              stm32f10x_pwr.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_pwr.c
+            
+            
+              stm32f10x_rcc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_rcc.c
+            
+            
+              stm32f10x_rtc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_rtc.c
+            
+            
+              stm32f10x_sdio.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_sdio.c
+            
+            
+              stm32f10x_spi.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_spi.c
+            
+            
+              stm32f10x_tim.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_tim.c
+            
+            
+              stm32f10x_usart.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_usart.c
+            
+            
+              stm32f10x_wwdg.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_wwdg.c
+            
+          
+        
+        
+          DRV
+          
+            
+              bsp_sys.c
+              1
+              ..\DRV\bsp_sys.c
+            
+            
+              bsp_GPIO.c
+              1
+              ..\DRV\bsp_GPIO.c
+            
+            
+              bsp_NVIC.C
+              1
+              ..\DRV\bsp_NVIC.C
+            
+            
+              bsp_usart.c
+              1
+              ..\DRV\bsp_usart.c
+            
+            
+              delay.c
+              1
+              ..\DRV\delay.c
+            
+            
+              bsp_iic.c
+              1
+              ..\DRV\bsp_iic.c
+            
+            
+              bsp_timer.c
+              1
+              ..\DRV\bsp_timer.c
+            
+          
+        
+        
+          HARDWARE
+          
+            
+              moto.c
+              1
+              ..\HARDWARE\MOTO\moto.c
+            
+            
+              oled.c
+              1
+              ..\HARDWARE\OLED\oled.c
+            
+            
+              pid.c
+              1
+              ..\HARDWARE\PID\pid.c
+            
+            
+              car.c
+              1
+              ..\HARDWARE\MOTO\car.c
+            
+            
+              bluetooth.c
+              1
+              ..\HARDWARE\MOTO\bluetooth.c
+            
+          
+        
+        
+          USER
+          
+            
+              main.c
+              1
+              ..\User\main.c
+            
+            
+              stm32f10x_it.c
+              1
+              ..\User\stm32f10x_it.c
+            
+          
+        
+      
+    
+  
+
+    
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project_PROJECT.dep b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project_PROJECT.dep
new file mode 100644
index 0000000..d882f8e
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project_PROJECT.dep	
@@ -0,0 +1,1018 @@
+Dependencies for Project 'Project', Target 'PROJECT': (DO NOT MODIFY !)
+F (..\Libraries\CMSIS\startup\startup_stm32f10x_md.s)(0x4D783CD2)(--cpu Cortex-M3 -g --apcs=interwork 

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

--list ..\listing\startup_stm32f10x_md.lst --xref -o ..\output\startup_stm32f10x_md.o --depend ..\output\startup_stm32f10x_md.d)
+F (..\Libraries\CMSIS\core_cm3.c)(0x4C0C587E)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\core_cm3.o --omf_browse ..\output\core_cm3.crf --depend ..\output\core_cm3.d)
+I (D:\Program Files (x86)\keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+F (..\Libraries\CMSIS\system_stm32f10x.c)(0x4D783CB0)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\system_stm32f10x.o --omf_browse ..\output\system_stm32f10x.crf --depend ..\output\system_stm32f10x.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\misc.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\misc.o --omf_browse ..\output\misc.crf --depend ..\output\misc.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_adc.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_adc.o --omf_browse ..\output\stm32f10x_adc.crf --depend ..\output\stm32f10x_adc.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_bkp.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_bkp.o --omf_browse ..\output\stm32f10x_bkp.crf --depend ..\output\stm32f10x_bkp.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_can.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_can.o --omf_browse ..\output\stm32f10x_can.crf --depend ..\output\stm32f10x_can.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_can.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_cec.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_cec.o --omf_browse ..\output\stm32f10x_cec.crf --depend ..\output\stm32f10x_cec.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_crc.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_crc.o --omf_browse ..\output\stm32f10x_crc.crf --depend ..\output\stm32f10x_crc.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_dac.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_dac.o --omf_browse ..\output\stm32f10x_dac.crf --depend ..\output\stm32f10x_dac.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_dbgmcu.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_dbgmcu.o --omf_browse ..\output\stm32f10x_dbgmcu.crf --depend ..\output\stm32f10x_dbgmcu.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_dma.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_dma.o --omf_browse ..\output\stm32f10x_dma.crf --depend ..\output\stm32f10x_dma.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_exti.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_exti.o --omf_browse ..\output\stm32f10x_exti.crf --depend ..\output\stm32f10x_exti.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_flash.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_flash.o --omf_browse ..\output\stm32f10x_flash.crf --depend ..\output\stm32f10x_flash.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_fsmc.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_fsmc.o --omf_browse ..\output\stm32f10x_fsmc.crf --depend ..\output\stm32f10x_fsmc.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_gpio.c)(0x526E3B02)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_gpio.o --omf_browse ..\output\stm32f10x_gpio.crf --depend ..\output\stm32f10x_gpio.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_i2c.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_i2c.o --omf_browse ..\output\stm32f10x_i2c.crf --depend ..\output\stm32f10x_i2c.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_iwdg.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_iwdg.o --omf_browse ..\output\stm32f10x_iwdg.crf --depend ..\output\stm32f10x_iwdg.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_pwr.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_pwr.o --omf_browse ..\output\stm32f10x_pwr.crf --depend ..\output\stm32f10x_pwr.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_rcc.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_rcc.o --omf_browse ..\output\stm32f10x_rcc.crf --depend ..\output\stm32f10x_rcc.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_rtc.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_rtc.o --omf_browse ..\output\stm32f10x_rtc.crf --depend ..\output\stm32f10x_rtc.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_sdio.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_sdio.o --omf_browse ..\output\stm32f10x_sdio.crf --depend ..\output\stm32f10x_sdio.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_spi.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_spi.o --omf_browse ..\output\stm32f10x_spi.crf --depend ..\output\stm32f10x_spi.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_tim.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_tim.o --omf_browse ..\output\stm32f10x_tim.crf --depend ..\output\stm32f10x_tim.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_usart.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_usart.o --omf_browse ..\output\stm32f10x_usart.crf --depend ..\output\stm32f10x_usart.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Libraries\FWlib\src\stm32f10x_wwdg.c)(0x4D783BB4)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_wwdg.o --omf_browse ..\output\stm32f10x_wwdg.crf --depend ..\output\stm32f10x_wwdg.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\DRV\delay\delay.c)(0x589ADF5E)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\delay.o --omf_browse ..\output\delay.crf --depend ..\output\delay.d)
+I (C:\Users\Administrator\Desktop\TX\DRV\delay\delay.h)(0x5898300E)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\DRV\NVIC\bsp_NVIC.C)(0x5898924E)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\bsp_nvic.o --omf_browse ..\output\bsp_nvic.crf --depend ..\output\bsp_nvic.d)
+I (C:\Users\Administrator\Desktop\TX\DRV\NVIC\bsp_nvic.h)(0x5766771C)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\DRV\iic\bsp_iic.c)(0x589A9536)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\bsp_iic.o --omf_browse ..\output\bsp_iic.crf --depend ..\output\bsp_iic.d)
+I (C:\Users\Administrator\Desktop\TX\DRV\iic\bsp_iic.h)(0x589A930A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\inttypes.h)(0x51C7B744)
+F (..\DRV\GPIO\bsp_GPIO.c)(0x58989186)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\bsp_gpio.o --omf_browse ..\output\bsp_gpio.crf --depend ..\output\bsp_gpio.d)
+I (C:\Users\Administrator\Desktop\TX\DRV\GPIO\bsp_GPIO.h)(0x5AFAF33E)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\DRV\usart\bsp_usart.c)(0x589A975E)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\bsp_usart.o --omf_browse ..\output\bsp_usart.crf --depend ..\output\bsp_usart.d)
+I (C:\Users\Administrator\Desktop\TX\DRV\usart\bsp_usart.h)(0x589A9760)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdio.h)(0x51C7B744)
+F (..\DRV\SPI\bsp_spi.c)(0x55C75310)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\bsp_spi.o --omf_browse ..\output\bsp_spi.crf --depend ..\output\bsp_spi.d)
+I (C:\Users\Administrator\Desktop\TX\DRV\SPI\bsp_spi.h)(0x55C752E4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\HARDWARE\24CXX\24cxx.c)(0x58989988)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\24cxx.o --omf_browse ..\output\24cxx.crf --depend ..\output\24cxx.d)
+I (C:\Users\Administrator\Desktop\TX\HARDWARE\24CXX\24cxx.h)(0x589A924C)
+I (C:\Users\Administrator\Desktop\TX\DRV\iic\bsp_iic.h)(0x589A930A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\inttypes.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\DRV\delay\delay.h)(0x5898300E)
+F (..\HARDWARE\OLED\oled.c)(0x589AE362)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\oled.o --omf_browse ..\output\oled.crf --depend ..\output\oled.d)
+I (C:\Users\Administrator\Desktop\TX\HARDWARE\OLED\oled.h)(0x589AE23E)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdlib.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\HARDWARE\OLED\oledfont.h)(0x544D1530)
+I (C:\Users\Administrator\Desktop\TX\DRV\delay\delay.h)(0x5898300E)
+I (C:\Users\Administrator\Desktop\TX\DRV\iic\bsp_iic.h)(0x589A930A)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\inttypes.h)(0x51C7B744)
+F (..\HARDWARE\24L01\24l01.c)(0x5AFAF054)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\24l01.o --omf_browse ..\output\24l01.crf --depend ..\output\24l01.d)
+I (C:\Users\Administrator\Desktop\TX\HARDWARE\24L01\24l01.h)(0x5AFAED74)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\DRV\delay\delay.h)(0x5898300E)
+F (..\User\main.c)(0x5AFAFBCC)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\main.o --omf_browse ..\output\main.crf --depend ..\output\main.d)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\DRV\delay\delay.h)(0x5898300E)
+I (C:\Users\Administrator\Desktop\TX\DRV\GPIO\bsp_GPIO.h)(0x5AFAF33E)
+I (C:\Users\Administrator\Desktop\TX\DRV\NVIC\bsp_nvic.h)(0x5766771C)
+I (C:\Users\Administrator\Desktop\TX\HARDWARE\24CXX\24cxx.h)(0x589A924C)
+I (C:\Users\Administrator\Desktop\TX\DRV\iic\bsp_iic.h)(0x589A930A)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\inttypes.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\DRV\usart\bsp_usart.h)(0x589A9760)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdio.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\HARDWARE\OLED\oled.h)(0x589AE23E)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdlib.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\HARDWARE\24L01\24l01.h)(0x5AFAED74)
+F (..\User\stm32f10x_it.c)(0x55A50C68)(-c --cpu Cortex-M3 -g -O0 --apcs=interwork -I..\Libraries\CMSIS -I..\Libraries\FWlib\inc -I..\Libraries\FWlib\src -I..\User -I..\DRV\SysTick -I..\DRV\delay -I..\DRV\usart -I..\DRV\NVIC -I..\DRV\iic -I..\DRV\GPIO -I..\HARDWARE\24CXX -I..\HARDWARE\OLED -I..\HARDWARE\24L01

-I "D:\Program Files (x86)\Keil\ARM\RV31\INC"

-I "D:\Program Files (x86)\Keil\ARM\CMSIS\Include"

-I "D:\Program Files (x86)\Keil\ARM\Inc\ST\STM32F10x"

-DSTM32F10X_MD -DUSE_STDPERIPH_DRIVER -o ..\output\stm32f10x_it.o --omf_browse ..\output\stm32f10x_it.crf --depend ..\output\stm32f10x_it.d)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_it.h)(0x4D99A59E)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\stm32f10x.h)(0x4D783CB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\core_cm3.h)(0x4D523B58)
+I (D:\Program Files (x86)\Keil\ARM\ARMCC\include\stdint.h)(0x51C7B744)
+I (C:\Users\Administrator\Desktop\TX\Libraries\CMSIS\system_stm32f10x.h)(0x4D783CAA)
+I (C:\Users\Administrator\Desktop\TX\User\stm32f10x_conf.h)(0x55AC648A)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_adc.h)(0x522FD1A6)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_bkp.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_cec.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_crc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dac.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dbgmcu.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_dma.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_exti.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_flash.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_fsmc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_gpio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_i2c.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_iwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_pwr.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rcc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_rtc.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_sdio.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_spi.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_tim.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_usart.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\stm32f10x_wwdg.h)(0x4D783BB4)
+I (C:\Users\Administrator\Desktop\TX\Libraries\FWlib\inc\misc.h)(0x4D783BB4)
+F (..\Doc\readme.txt)(0x52391040)()
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project_Target 1.dep b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project_Target 1.dep
new file mode 100644
index 0000000..fd555ab
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project_Target 1.dep	
@@ -0,0 +1 @@
+Dependencies for Project 'Project', Target 'Target 1': (DO NOT MODIFY !)
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project_uvopt.bak b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project_uvopt.bak
new file mode 100644
index 0000000..5d5a140
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project_uvopt.bak	
@@ -0,0 +1,3513 @@
+
+
+
+  1.0
+
+  
    ### uVision Project, (C) Keil Software
    
+
+  
+    *.c
+    *.s*; *.src; *.a*
+    *.obj
+    *.lib
+    *.txt; *.h; *.inc
+    *.plm
+    *.cpp
+  
+
+  
+    0
+    0
+  
+
+  
+    PROJECT
+    0x4
+    ARM-ADS
+    
+      8000000
+      
+        1
+        1
+        1
+        0
+      
+      
+        1
+        65535
+        0
+        0
+        0
+      
+      
+        79
+        66
+        8
+        ..\Listing\
+      
+      
+        1
+        1
+        1
+        0
+        1
+        1
+        0
+        1
+        0
+        0
+        0
+        0
+      
+      
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        0
+        0
+      
+      
+        1
+        0
+        1
+      
+      255
+      
+        
+          0
+          Reference Manual
+          DATASHTS\ST\STM32F10xxx.PDF
+        
+      
+      
+        SARMCM3.DLL
+        
+        DARMSTM.DLL
+        -pSTM32F103C8
+        SARMCM3.DLL
+        
+        TARMSTM.DLL
+        -pSTM32F103C8
+      
+      
+        0
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        1
+        0
+        1
+        0
+        0
+        7
+        
+        
+        
+        
+        
+        
+        
+        
+        
+        
+        Segger\JL2CM3.dll
+      
+      
+        
+          0
+          DLGTARM
+          (1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=-1,-1,-1,-1,0)(121=-1,-1,-1,-1,0)(122=-1,-1,-1,-1,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)
+        
+        
+          0
+          DLGUARM
+          (106=-1,-1,-1,-1,0)(107=-1,-1,-1,-1,0)
+        
+        
+          0
+          ST-LINKIII-KEIL
+          -S
+        
+        
+          0
+          JL2CM3
+          -U20090928 -O78 -S1 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TRE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F10x_16 -FS08000000 -FL04000
+        
+        
+          0
+          DLGDARM
+          (1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=-1,-1,-1,-1,0)(121=-1,-1,-1,-1,0)(122=-1,-1,-1,-1,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(234=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)
+        
+        
+          0
+          ARMDBGFLAGS
+          -T0
+        
+        
+          0
+          UL2CM3
+          -O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL010000)
+        
+      
+      
+        
+          0
+          0
+          37
+          1
+          
    134225184
    
+          0
+          0
+          0
+          0
+          1
+          main.c
+          
+          
+            
+          
+      
+        0
+        1
+        0
+        0
+        0
+        0
+        0
+        1
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+        0
+      
+      
+      
+        
+      
+
+  
+    STARTUP
+    0
+    0
+    0
+    
+      1
+      1
+      2
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s
+      startup_stm32f10x_ld.s
+    
+  
+
+  
+    CMSIS
+    0
+    0
+    0
+    
+      2
+      2
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\CMSIS\core_cm3.c
+      core_cm3.c
+    
+    
+      2
+      3
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\CMSIS\system_stm32f10x.c
+      system_stm32f10x.c
+    
+  
+
+  
+    FWlib
+    0
+    0
+    0
+    
+      3
+      4
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\misc.c
+      misc.c
+    
+    
+      3
+      5
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_adc.c
+      stm32f10x_adc.c
+    
+    
+      3
+      6
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_bkp.c
+      stm32f10x_bkp.c
+    
+    
+      3
+      7
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_can.c
+      stm32f10x_can.c
+    
+    
+      3
+      8
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_cec.c
+      stm32f10x_cec.c
+    
+    
+      3
+      9
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_crc.c
+      stm32f10x_crc.c
+    
+    
+      3
+      10
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_dac.c
+      stm32f10x_dac.c
+    
+    
+      3
+      11
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_dbgmcu.c
+      stm32f10x_dbgmcu.c
+    
+    
+      3
+      12
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_dma.c
+      stm32f10x_dma.c
+    
+    
+      3
+      13
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_exti.c
+      stm32f10x_exti.c
+    
+    
+      3
+      14
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_flash.c
+      stm32f10x_flash.c
+    
+    
+      3
+      15
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_fsmc.c
+      stm32f10x_fsmc.c
+    
+    
+      3
+      16
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_gpio.c
+      stm32f10x_gpio.c
+    
+    
+      3
+      17
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_i2c.c
+      stm32f10x_i2c.c
+    
+    
+      3
+      18
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_iwdg.c
+      stm32f10x_iwdg.c
+    
+    
+      3
+      19
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_pwr.c
+      stm32f10x_pwr.c
+    
+    
+      3
+      20
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_rcc.c
+      stm32f10x_rcc.c
+    
+    
+      3
+      21
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_rtc.c
+      stm32f10x_rtc.c
+    
+    
+      3
+      22
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_sdio.c
+      stm32f10x_sdio.c
+    
+    
+      3
+      23
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_spi.c
+      stm32f10x_spi.c
+    
+    
+      3
+      24
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_tim.c
+      stm32f10x_tim.c
+    
+    
+      3
+      25
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_usart.c
+      stm32f10x_usart.c
+    
+    
+      3
+      26
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Libraries\FWlib\src\stm32f10x_wwdg.c
+      stm32f10x_wwdg.c
+    
+  
+
+  
+    DRIVER
+    1
+    0
+    0
+    
+      4
+      27
+      1
+      0
+      0
+      67
+      0
+      1
+      18
+      0
+      ..\User\led\bsp_led.c
+      bsp_led.c
+    
+    
+      4
+      28
+      1
+      0
+      0
+      32
+      0
+      25
+      37
+      0
+      ..\User\Key\bsp_exti.c
+      bsp_exti.c
+    
+    
+      4
+      29
+      1
+      0
+      0
+      12
+      0
+      13
+      24
+      0
+      ..\User\delay\delay.c
+      delay.c
+    
+  
+
+  
+    USER
+    1
+    0
+    0
+    
+      5
+      30
+      1
+      0
+      0
+      2
+      0
+      8
+      26
+      0
+      ..\User\main.c
+      main.c
+    
+    
+      5
+      31
+      1
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\User\stm32f10x_it.c
+      stm32f10x_it.c
+    
+  
+
+  
+    HARDWARE
+    0
+    0
+    0
+  
+
+  
+    DOC
+    0
+    0
+    0
+    
+      7
+      32
+      5
+      0
+      0
+      0
+      0
+      0
+      0
+      0
+      ..\Doc\readme.txt
+      readme.txt
+    
+  
+
+  
+    E:\颢诚科技\emwin\工程样版\DEMO\User\PwmOutput\bsp_pwm_output.c
+    88
+    103
+    0
+    
+      0
+      0
+      0
+      
+        0
+        0
+      
+      
+        0
+        0
+      
+      
+        0
+        0
+        0
+        0
+      
+    
+  
+
+  
+    E:\学习资料\STM32\STM32_DEMO\STM32程序自己的\C8T6\C8T6V2\1-LED\Project\User\SysTick\bsp_SysTick.c
+    47
+    60
+    0
+    
+      0
+      0
+      0
+      
+        0
+        0
+      
+      
+        0
+        0
+      
+      
+        0
+        0
+        0
+        0
+      
+    
+  
+
+  
+    E:\颢诚科技\颢诚科技产品\核心板系列\STM32\C8T6核心板\STM32F103C8T6核心板资料\STM32F103C8T6核心板V2资料\C8T6V2\1-LED\Project\Libraries\FWlib\inc\stm32f10x_exti.h
+    47
+    47
+    0
+    
+      0
+      0
+      0
+      
+        0
+        0
+      
+      
+        0
+        0
+      
+      
+        0
+        0
+        0
+        0
+      
+    
+  
+
+  
+    E:\颢诚科技\颢诚科技产品\核心板系列\STM32\C8T6核心板\STM32F103C8T6核心板资料\STM32F103C8T6核心板V2资料\C8T6V2\1-LED\Project\Libraries\FWlib\inc\stm32f10x_rcc.h
+    37
+    37
+    0
+    
+      0
+      0
+      0
+      
+        0
+        0
+      
+      
+        0
+        0
+      
+      
+        0
+        0
+        0
+        0
+      
+    
+  
+
+  
+    E:\颢诚科技\颢诚科技产品\核心板系列\STM32\C8T6核心板\STM32F103C8T6核心板资料\STM32F103C8T6核心板V2资料\C8T6V2\1-LED\Project\User\stm32f10x_it.h
+    1
+    1
+    0
+    
+      0
+      0
+      0
+      
+        0
+        0
+      
+      
+        0
+        0
+      
+      
+        0
+        0
+        0
+        0
+      
+    
+  
+
+  
+    E:\颢诚科技\颢诚科技产品\核心板系列\STM32\C8T6核心板\STM32F103C8T6核心板资料\STM32F103C8T6核心板V2资料\C8T6V2\1-LED\Project\User\led\bsp_led.h
+    7
+    7
+    0
+    
+      0
+      0
+      0
+      
+        0
+        0
+      
+      
+        0
+        0
+      
+      
+        0
+        0
+        0
+        0
+      
+    
+  
+
+  
+    E:\学习资料\STM32\STM32_DEMO\STM32程序自己的\C8T6\C8T6V2\1-LED\Project\User\SysTick\bsp_SysTick.h
+    1
+    6
+    0
+    
+      0
+      0
+      0
+      
+        0
+        0
+      
+      
+        0
+        0
+      
+      
+        0
+        0
+        0
+        0
+      
+    
+  
+
+  
+    E:\颢诚科技\颢诚科技产品\核心板系列\STM32\C8T6核心板\STM32F103C8T6核心板资料\STM32F103C8T6核心板V2资料\C8T6V2\1-LED\Project\User\delay\delay.h
+    1
+    7
+    0
+    
+      0
+      0
+      0
+      
+        0
+        0
+      
+      
+        0
+        0
+      
+      
+        0
+        0
+        0
+        0
+      
+    
+  
+
+  
+    
+    
+      44
+      0
+      1
+      
+        -1
+        -1
+      
+      
+        -1
+        -1
+      
+      
+        127
+        229
+        1347
+        919
+      
+    
+    
+      0
+      
+        2088
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
+      
+    
+    
+      0
+      Build
+      
+        -1
+        -1
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BC0000004F0000004C040000E1000000
+        
+        
+          16
+          C40000006D00000054040000FF000000
+        
+      
+      
+        1005
+        1005
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000FA00000030020000
+        
+        
+          16
+          080000001E000000C000000066020000
+        
+      
+      
+        109
+        109
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000FA00000030020000
+        
+        
+          16
+          080000001E000000C000000066020000
+        
+      
+      
+        1465
+        1465
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000003802000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1466
+        1466
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000003802000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1467
+        1467
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000003802000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1468
+        1468
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000003802000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1506
+        1506
+        0
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E000000C000000066020000
+        
+      
+      
+        1507
+        1507
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000003802000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1913
+        1913
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BF0000006600000049040000C8000000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1935
+        1935
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000003802000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1936
+        1936
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000003802000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1937
+        1937
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000003802000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1939
+        1939
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000640200009D050000C6020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1940
+        1940
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000640200009D050000C6020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1941
+        1941
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000640200009D050000C6020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1942
+        1942
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000640200009D050000C6020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1944
+        1944
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          030000003802000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        195
+        195
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000FA00000030020000
+        
+        
+          16
+          080000001E000000C000000066020000
+        
+      
+      
+        196
+        196
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000FA00000030020000
+        
+        
+          16
+          080000001E000000C000000066020000
+        
+      
+      
+        197
+        197
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          00000000610200004E040000DF020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        198
+        198
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          000000002102000008050000C7020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        199
+        199
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000640200009D050000C6020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        203
+        203
+        0
+        0
+        0
+        0
+        32767
+        0
+        8192
+        0
+        
+          16
+          BF0000006600000049040000C8000000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        204
+        204
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BF0000006600000049040000C8000000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        221
+        221
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000000000000000000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        343
+        343
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BF0000006600000049040000C8000000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        346
+        346
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BF0000006600000049040000C8000000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        35824
+        35824
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BF0000006600000049040000C8000000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        35885
+        35885
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35886
+        35886
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35887
+        35887
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35888
+        35888
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35889
+        35889
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35890
+        35890
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35891
+        35891
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35892
+        35892
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35893
+        35893
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35894
+        35894
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35895
+        35895
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35896
+        35896
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35897
+        35897
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35898
+        35898
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35899
+        35899
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35900
+        35900
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35901
+        35901
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35902
+        35902
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35903
+        35903
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35904
+        35904
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35905
+        35905
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          530400006600000005050000AE020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        38003
+        38003
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000FA00000084020000
+        
+        
+          16
+          080000001E000000C000000066020000
+        
+      
+      
+        38007
+        38007
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          03000000640200009D050000C6020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        59392
+        59392
+        1
+        0
+        0
+        0
+        940
+        0
+        8192
+        0
+        
+          16
+          0000000000000000B70300001C000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59393
+        0
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000DF0200004E040000F2020000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59398
+        59398
+        1
+        0
+        0
+        0
+        391
+        0
+        8192
+        1
+        
+          16
+          000000001C0000009201000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        593980
+        59398
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000004F04000017000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        593981b4
+        59398
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000001905000017000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        593987a06
+        59398
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000001905000017000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59399
+        59399
+        0
+        0
+        0
+        0
+        657
+        0
+        8192
+        2
+        
+          16
+          00000000380000009C02000054000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2485
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
+      
+      
+        59392
+        File
+        
+          2064
+          00200000010000002800FFFF01001100434D4643546F6F6C426172427574746F6E00E100000000000000000000000000000000000000000000000100000001000000018001E100000000000001000000000000000000000000000000000100000001000000018003E1000000000000020000000000000000000000000000000001000000010000000180CD7F0000000000000300000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000018023E100000000040004000000000000000000000000000000000100000001000000018022E100000000000005000000000000000000000000000000000100000001000000018025E10000000004000600000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF00000000000000000000000000010000000100000001802BE10000000004000700000000000000000000000000000000010000000100000001802CE10000000004000800000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF00000000000000000000000000010000000100000001807A8A0000000004000900000000000000000000000000000000010000000100000001807B8A0000000004000A00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180D3B00000000000000B000000000000000000000000000000000100000001000000018015B10000000004000C0000000000000000000000000000000001000000010000000180F4B00000000004000D000000000000000000000000000000000100000001000000018036B10000000004000E00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180FF88000000000400460000000000000000000000000000000001000000010000000180FE880000000004004500000000000000000000000000000000010000000100000001800B810000000004001300000000000000000000000000000000010000000100000001800C810000000004001400000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180F0880000020000000F000000000000000000000000000000000100000001000000FFFF0100120043555646696E64436F6D626F427574746F6EE803000000000000000000000000000000000000000000000001000000010000009600000002002050000000000D4C43445F57696E646F776D6178960000000000000004000D4C43445F57696E646F776D6178064C43445F5244054750494F45054750494F4200000000000000000000000000000000018024E10000000000001100000000000000000000000000000000010000000100000001800A810000000000001200000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000018022800000020000001500000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180C488000000000000160000000000000000000000000000000001000000010000000180C988000000000400180000000000000000000000000000000001000000010000000180C788000000000000190000000000000000000000000000000001000000010000000180C8880000000000001700000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000FFFF01001500434D4643546F6F6C4261724D656E75427574746F6E4C010000020001001A0000000F50726F6A6563742057696E646F7773000000000000000000000000010000000100000000000000000000000100000008002880DD880000000000001A0000000750726F6A656374000000000000000000000000010000000100000000000000000000000100000000002880DC8B0000000000003A00000005426F6F6B73000000000000000000000000010000000100000000000000000000000100000000002880E18B0000000000003B0000000946756E6374696F6E73000000000000000000000000010000000100000000000000000000000100000000002880E28B000000000000400000000954656D706C6174657300000000000000000000000001000000010000000000000000000000010000000000288018890000000000003D0000000E536F757263652042726F777365720000000000000000000000000100000001000000000000000000000001000000000028800000000000000400FFFFFFFF00000000000000000001000000000000000100000000000000000000000100000000002880D988000000000000390000000C4275696C64204F7574707574000000000000000000000000010000000100000000000000000000000100000000002880E38B000000000000410000000B46696E64204F75747075740000000000000000000000000100000001000000000000000000000001000000000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180FB7F0000000000001B000000000000000000000000000000000100000001000000000000000446696C65AC030000
+        
+        
+          1423
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
+        
+        
+          1423
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
+        
+      
+      
+        59398
+        Build
+        
+          571
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
+        
+        
+          478
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
+        
+        
+          478
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
+        
+      
+      
+        59399
+        Debug
+        
+          2582
+          00200000000000001B00FFFF01001100434D4643546F6F6C426172427574746F6ECC880000000000002500000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000018017800000000000002600000000000000000000000000000000010000000100000001801D800000000000002700000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF00000000000000000000000000010000000100000001801A800000000000002800000000000000000000000000000000010000000100000001801B80000000000000290000000000000000000000000000000001000000010000000180E57F0000000000002A00000000000000000000000000000000010000000100000001801C800000000000002B00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000018000890000000000002C00000000000000000000000000000000010000000100000001800000000001000000FFFFFFFF0000000000000000000000000001000000010000000180E48B0000000000002D0000000000000000000000000000000001000000010000000180F07F0000000000002E0000000000000000000000000000000001000000010000000180E8880000000000003700000000000000000000000000000000010000000100000001803B010000000000002F0000000000000000000000000000000001000000010000000180BB8A00000000000030000000000000000000000000000000000100000001000000FFFF01001500434D4643546F6F6C4261724D656E75427574746F6E0E01000000000000310000000D57617463682057696E646F7773000000000000000000000000010000000100000000000000000000000100000003001380DB8B00000000000031000000064C6F63616C73000000000000000000000000010000000100000000000000000000000100000000001380D88B000000000000310000000757617463682031000000000000000000000000010000000100000000000000000000000100000000001380D98B0000000000003100000007576174636820320000000000000000000000000100000001000000000000000000000001000000000013800F01000000000000320000000E4D656D6F72792057696E646F7773000000000000000000000000010000000100000000000000000000000100000004001380D28B00000000000032000000084D656D6F72792031000000000000000000000000010000000100000000000000000000000100000000001380D38B00000000000032000000084D656D6F72792032000000000000000000000000010000000100000000000000000000000100000000001380D48B00000000000032000000084D656D6F72792033000000000000000000000000010000000100000000000000000000000100000000001380D58B00000000000032000000084D656D6F727920340000000000000000000000000100000001000000000000000000000001000000000013801001000000000000330000000E53657269616C2057696E646F77730000000000000000000000000100000001000000000000000000000001000000040013809307000000000000330000000755415254202331000000000000000000000000010000000100000000000000000000000100000000001380940700000000000033000000075541525420233200000000000000000000000001000000010000000000000000000000010000000000138095070000000000003300000007554152542023330000000000000000000000000100000001000000000000000000000001000000000013809607000000000000330000000E49544D2F525441205669657765720000000000000000000000000100000001000000000000000000000001000000000013803C010000000000003400000010416E616C797369732057696E646F7773000000000000000000000000010000000100000000000000000000000100000003001380658A000000000000340000000E4C6F67696320416E616C797A6572000000000000000000000000010000000100000000000000000000000100000000001380DC7F0000000000003E00000014506572666F726D616E636520416E616C797A6572000000000000000000000000010000000100000000000000000000000100000000001380E788000000000000380000000D436F646520436F76657261676500000000000000000000000001000000010000000000000000000000010000000000138053010000000000003F0000001553797374656D205669657765722057696E646F77730000000000000000000000000100000001000000000000000000000001000000010013805401000000000000FFFFFFFF115472616365204D656E7520416E63686F720000000000000000010000000000000001000000000000000000000001000000000013802901000000000000350000001553797374656D205669657765722057696E646F77730000000000000000000000000100000001000000000000000000000001000000010013804B01000000000000FFFFFFFF1453797374656D2056696577657220416E63686F720000000000000000010000000000000001000000000000000000000001000000000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000138001890000000000003600000007546F6F6C626F7800000000000000000000000001000000010000000000000000000000010000000300138044C5000000000000FFFFFFFF0E5570646174652057696E646F77730000000000000000010000000000000001000000000000000000000001000000000013800000000000000400FFFFFFFF000000000000000000010000000000000001000000000000000000000001000000000013805B01000000000000FFFFFFFF12546F6F6C626F78204D656E75416E63686F720000000000000000010000000000000001000000000000000000000001000000000001800000000001000000FFFFFFFF000000000000000000000000000100000001000000138046010000000000004900000013446562756720526573746F72652056696577730000000000000000000000000100000001000000000000000000000001000000030013802C8C000000000000FFFFFFFF1A446562756720526573746F726520566965777320416E63686F720000000000000000010000000000000001000000000000000000000001000000000013800000000000000400FFFFFFFF000000000000000000010000000000000001000000000000000000000001000000000013802B8C000000000000FFFFFFFF17265265736574205669657720746F2044656661756C7473000000000000000001000000000000000100000000000000000000000100000000000000000005446562756791020000
+        
+        
+          968
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
+        
+        
+          968
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
+        
+      
+      
+        0
+        1440
+        900
+      
+    
+    
+      1
+      Debug
+      
+        -1
+        -1
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BC0000004F0000005C040000E1000000
+        
+        
+          16
+          BC000000650000005C040000F7000000
+        
+      
+      
+        1005
+        1005
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000B500000014020000
+        
+        
+          16
+          080000001E000000C000000066020000
+        
+      
+      
+        109
+        109
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000B500000014020000
+        
+        
+          16
+          080000001E000000C000000066020000
+        
+      
+      
+        1465
+        1465
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          930200004802000015050000BE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1466
+        1466
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          930200004802000015050000BE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1467
+        1467
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          930200004802000015050000BE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1468
+        1468
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          930200004802000015050000BE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1506
+        1506
+        1
+        0
+        0
+        0
+        32767
+        0
+        16384
+        0
+        
+          16
+          6004000063000000180500002D020000
+        
+        
+          16
+          080000001E000000C000000066020000
+        
+      
+      
+        1507
+        1507
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          930200004802000015050000BE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1913
+        1913
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BF0000006600000059040000C8000000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1935
+        1935
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          930200004802000015050000BE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1936
+        1936
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          930200004802000015050000BE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1937
+        1937
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          930200004802000015050000BE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1939
+        1939
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000004C02000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1940
+        1940
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000004C02000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1941
+        1941
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000004C02000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1942
+        1942
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000004C02000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        1944
+        1944
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          930200004802000015050000BE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        195
+        195
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000B500000014020000
+        
+        
+          16
+          080000001E000000C000000066020000
+        
+      
+      
+        196
+        196
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000B500000014020000
+        
+        
+          16
+          080000001E000000C000000066020000
+        
+      
+      
+        197
+        197
+        0
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          030000004C02000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        198
+        198
+        1
+        0
+        0
+        0
+        32767
+        0
+        32768
+        0
+        
+          16
+          00000000310200008C020000D7020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        199
+        199
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000004C02000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        203
+        203
+        0
+        0
+        0
+        0
+        32767
+        0
+        8192
+        0
+        
+          16
+          BF0000006600000059040000C8000000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        204
+        204
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BF0000006600000059040000C8000000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        221
+        221
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000000000000000000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        343
+        343
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BF0000006600000059040000C8000000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        346
+        346
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BF0000006600000059040000C8000000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        35824
+        35824
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          BF0000006600000059040000C8000000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        35885
+        35885
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35886
+        35886
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35887
+        35887
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35888
+        35888
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35889
+        35889
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35890
+        35890
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35891
+        35891
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35892
+        35892
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35893
+        35893
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35894
+        35894
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35895
+        35895
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35896
+        35896
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35897
+        35897
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35898
+        35898
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35899
+        35899
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35900
+        35900
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35901
+        35901
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35902
+        35902
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35903
+        35903
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35904
+        35904
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        35905
+        35905
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          63040000660000001505000014020000
+        
+        
+          16
+          080000001E00000098010000AE010000
+        
+      
+      
+        38003
+        38003
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          0300000066000000B500000014020000
+        
+        
+          16
+          080000001E000000C000000066020000
+        
+      
+      
+        38007
+        38007
+        0
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          030000004C02000005050000AE020000
+        
+        
+          16
+          080000001E0000008C020000B0000000
+        
+      
+      
+        59392
+        59392
+        1
+        0
+        0
+        0
+        940
+        0
+        8192
+        0
+        
+          16
+          0000000000000000B70300001C000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59393
+        0
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000D702000018050000EA020000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59398
+        59398
+        0
+        0
+        0
+        0
+        391
+        0
+        8192
+        1
+        
+          16
+          000000001C0000009201000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        593980
+        59398
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000001805000017000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        593981b4
+        59398
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000001805000017000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        593987a06
+        59398
+        1
+        0
+        0
+        0
+        32767
+        0
+        4096
+        0
+        
+          16
+          00000000000000001805000017000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        59399
+        59399
+        1
+        0
+        0
+        0
+        657
+        0
+        8192
+        2
+        
+          16
+          000000001C0000009C02000038000000
+        
+        
+          16
+          0A0000000A0000006E0000006E000000
+        
+      
+      
+        2484
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
+      
+      
+        59392
+        File
+        
+          2064
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
+        
+        
+          1423
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
+        
+        
+          1423
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
+        
+      
+      
+        59398
+        Build
+        
+          552
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
+        
+        
+          478
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
+        
+        
+          478
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
+        
+      
+      
+        59399
+        Debug
+        
+          2582
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
+        
+        
+          968
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
+        
+        
+          968
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
+        
+      
+      
+        0
+        1366
+        768
+      
+    
+  
+
+  
+    1
+    0
+    
+      100
+      0
+      
+        
+          ..\User\delay\delay.h
+          56
+          1
+          7
+        
+        
+          ..\User\delay\delay.c
+          12
+          13
+          24
+        
+        
+          ..\User\Key\bsp_exti.c
+          32
+          25
+          37
+        
+        
+          E:\颢诚科技\emwin\工程样版\DEMO\User\PwmOutput\bsp_pwm_output.c
+          38
+          88
+          103
+        
+        
+          E:\学习资料\STM32\STM32_DEMO\STM32程序自己的\C8T6\C8T6V2\1-LED\Project\User\SysTick\bsp_SysTick.c
+          31
+          47
+          60
+        
+        
+          ..\Libraries\FWlib\inc\stm32f10x_exti.h
+          2
+          47
+          47
+        
+        
+          ..\Libraries\FWlib\inc\stm32f10x_rcc.h
+          0
+          37
+          37
+        
+        
+          ..\User\stm32f10x_it.h
+          0
+          1
+          1
+        
+        
+          ..\User\led\bsp_led.h
+          0
+          7
+          7
+        
+        
+          ..\User\led\bsp_led.c
+          67
+          1
+          18
+        
+        
+          E:\学习资料\STM32\STM32_DEMO\STM32程序自己的\C8T6\C8T6V2\1-LED\Project\User\SysTick\bsp_SysTick.h
+          9
+          1
+          6
+        
+        
+          ..\User\main.c
+          2
+          8
+          26
+        
+      
+    
+  
+
+    
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project_uvproj.bak b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project_uvproj.bak
new file mode 100644
index 0000000..df9d160
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/Project/Project_uvproj.bak	
@@ -0,0 +1,582 @@
+
+
+
+  1.0
+
+  
    ### uVision Project, (C) Keil Software
    
+
+  
+    
+      PROJECT
+      0x4
+      ARM-ADS
+      
+        
+          STM32F103C8
+          STMicroelectronics
+          IRAM(0x20000000-0x20004FFF) IROM(0x8000000-0x800FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3")
+          
+          "STARTUP\ST\STM32F10x.s" ("STM32 Startup Code")
+          UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL010000)
+          4235
+          stm32f10x_lib.h
+          
+          
+          
+          
+          
+          
+          
+          
+          
+          0
+          
+          
+          
+          ST\STM32F10x\
+          ST\STM32F10x\
+          
+            0
+            0
+            0
+            0
+            1
+          
+          ..\Output\
+          Project
+          1
+          0
+          1
+          1
+          1
+          ..\Listing\
+          1
+          0
+          0
+          
+            0
+            0
+            
+            
+            0
+            0
+          
+          
+            0
+            0
+            
+            
+            0
+            0
+          
+          
+            0
+            0
+            
+            
+            0
+            0
+          
+          0
+          
+        
+        
+          0
+          0
+          0
+          0
+          0
+          1
+          0
+          0
+          0
+          0
+          3
+          
+          
+        
+        
+          SARMCM3.DLL
+          
+          DARMSTM.DLL
+          -pSTM32F103C8
+          SARMCM3.DLL
+          
+          TARMSTM.DLL
+          -pSTM32F103C8
+        
+        
+          
+            1
+            0
+            0
+            0
+            16
+          
+          
+            0
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            0
+          
+          
+            1
+            1
+            1
+            1
+            1
+            1
+            0
+            1
+          
+          0
+          7
+          
+            
+            
+            
+            
+            
+          
+          
+            
+            
+            
+            
+            
+            Segger\JL2CM3.dll
+          
+        
+        
+          
+            1
+            0
+            0
+            1
+            1
+            4099
+          
+          Segger\JL2CM3.dll
+          "" ()
+          
+        
+        
+          
+            0
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            0
+            1
+            1
+            0
+            1
+            1
+            0
+            0
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            0
+            0
+            "Cortex-M3"
+            
+            0
+            0
+            0
+            1
+            1
+            0
+            0
+            0
+            0
+            0
+            8
+            0
+            0
+            0
+            3
+            3
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            1
+            0
+            0
+            0
+            0
+            1
+            0
+            
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x20000000
+                0x5000
+              
+              
+                1
+                0x8000000
+                0x10000
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                1
+                0x8000000
+                0x10000
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x20000000
+                0x5000
+              
+              
+                0
+                0x0
+                0x0
+              
+            
+            
+          
+          
+            1
+            1
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            
+              
+              STM32F10X_LD, USE_STDPERIPH_DRIVER
+              
+              ..\Libraries\CMSIS;..\Libraries\FWlib\inc;..\Libraries\FWlib\src;..\User;..\User\led;..\User\Key;..\User\SysTick;..\User\PwmOutput
+            
+          
+          
+            1
+            0
+            0
+            0
+            0
+            0
+            0
+            
+              
+              
+              
+              
+            
+          
+          
+            1
+            0
+            0
+            0
+            1
+            0
+            0x08000000
+            0x20000000
+            
+            
+            
+            
+            
+            
+          
+        
+      
+      
+        
+          STARTUP
+          
+            
+              startup_stm32f10x_ld.s
+              2
+              ..\Libraries\CMSIS\startup\startup_stm32f10x_ld.s
+            
+          
+        
+        
+          CMSIS
+          
+            
+              core_cm3.c
+              1
+              ..\Libraries\CMSIS\core_cm3.c
+            
+            
+              system_stm32f10x.c
+              1
+              ..\Libraries\CMSIS\system_stm32f10x.c
+            
+          
+        
+        
+          FWlib
+          
+            
+              misc.c
+              1
+              ..\Libraries\FWlib\src\misc.c
+            
+            
+              stm32f10x_adc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_adc.c
+            
+            
+              stm32f10x_bkp.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_bkp.c
+            
+            
+              stm32f10x_can.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_can.c
+            
+            
+              stm32f10x_cec.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_cec.c
+            
+            
+              stm32f10x_crc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_crc.c
+            
+            
+              stm32f10x_dac.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_dac.c
+            
+            
+              stm32f10x_dbgmcu.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_dbgmcu.c
+            
+            
+              stm32f10x_dma.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_dma.c
+            
+            
+              stm32f10x_exti.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_exti.c
+            
+            
+              stm32f10x_flash.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_flash.c
+            
+            
+              stm32f10x_fsmc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_fsmc.c
+            
+            
+              stm32f10x_gpio.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_gpio.c
+            
+            
+              stm32f10x_i2c.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_i2c.c
+            
+            
+              stm32f10x_iwdg.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_iwdg.c
+            
+            
+              stm32f10x_pwr.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_pwr.c
+            
+            
+              stm32f10x_rcc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_rcc.c
+            
+            
+              stm32f10x_rtc.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_rtc.c
+            
+            
+              stm32f10x_sdio.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_sdio.c
+            
+            
+              stm32f10x_spi.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_spi.c
+            
+            
+              stm32f10x_tim.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_tim.c
+            
+            
+              stm32f10x_usart.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_usart.c
+            
+            
+              stm32f10x_wwdg.c
+              1
+              ..\Libraries\FWlib\src\stm32f10x_wwdg.c
+            
+          
+        
+        
+          DRIVER
+          
+            
+              bsp_led.c
+              1
+              ..\User\led\bsp_led.c
+            
+            
+              bsp_exti.c
+              1
+              ..\User\Key\bsp_exti.c
+            
+            
+              bsp_SysTick.c
+              1
+              ..\User\SysTick\bsp_SysTick.c
+            
+          
+        
+        
+          USER
+          
+            
+              main.c
+              1
+              ..\User\main.c
+            
+            
+              stm32f10x_it.c
+              1
+              ..\User\stm32f10x_it.c
+            
+          
+        
+        
+          HARDWARE
+        
+        
+          DOC
+          
+            
+              readme.txt
+              5
+              ..\Doc\readme.txt
+            
+          
+        
+      
+    
+  
+
+    
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/User/main.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/User/main.c
new file mode 100644
index 0000000..f2764c3
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/User/main.c	
@@ -0,0 +1,75 @@
+/******************** (C) COPYRIGHT 2023 GeekRebot *****************************
+* File Name          : main.c
+* Current Version    : V1.0  & ST 3.5.0
+* Author             : zhanli 719901725@qq.com
+* Date of Issued     : 2023.04.06 zhanli: Create
+* Comments           : GeekRebot STM32
+********************************************************************************/
+#include "bsp_sys.h"
+#include "stdio.h"
+#include "bluetooth.h"  
+
+unsigned char BLE_RX[64];
+/**----------------------------------------------------------------------
+* Function    : main
+* Description : GeekRebot
+* Author      : zhanli&719901725@qq.com
+* Date        : 2023/04/22 zhanli
+*---------------------------------------------------------------------**/ 
+int main(void)
+{	
+	System_Init();
+	Bluetooth_Init(9600);  
+
+	Car_Stop();
+	while (1)
+	{
+		Delay_ms(100);
+		USART2_Receive(BLE_RX, 6);
+
+		//USART2_Send(BLE_RX, 6); 
+		//Delay_ms(500);
+		//printf("hello world\n");
+		if((BLE_RX[3] == 0xB1)&&(BLE_RX[4]==0xB5))
+		{
+//			SetPoint = SetPoint + 10;
+			BLE_RX[3] = 0x00;
+		}
+		
+		if((BLE_RX[3] == 0xB3)&&(BLE_RX[4]==0xB7))
+		{
+//			SetPoint = SetPoint - 10;
+			BLE_RX[3] = 0x00;
+		}
+		
+		if((BLE_RX[3] == 0xB2)&&(BLE_RX[4]==0xB6))
+		{
+			Car_Go();
+		}
+		if((BLE_RX[3] == 0xB4)&&(BLE_RX[4]==0xB8))
+		{
+		
+			Car_Turn_Left();
+//			Delay_ms(500);
+//			Car_Go();
+			BLE_RX[3] = 0x00;
+		}
+		if((BLE_RX[3] == 0xB5)&&(BLE_RX[4]==0xB9))
+		{
+			Car_Stop();
+		}
+		if((BLE_RX[3] == 0xB6)&&(BLE_RX[4]==0xBA))
+		{
+
+			Car_Turn_Right();
+//			Delay_ms(500);
+//			Car_Go();
+			BLE_RX[3] = 0x00;
+		}
+		if((BLE_RX[3] == 0xB8)&&(BLE_RX[4]==0xBC))
+		{
+			Car_Back();
+		} 
+	}
+}
+
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/User/stm32f10x_conf.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/User/stm32f10x_conf.h
new file mode 100644
index 0000000..00e9173
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/User/stm32f10x_conf.h	
@@ -0,0 +1,76 @@
+/**
+  ******************************************************************************
+  * @file    Project/STM32F10x_StdPeriph_Template/stm32f10x_conf.h 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CONF_H
+#define __STM32F10x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
+	#include "stm32f10x_adc.h" 
+	#include "stm32f10x_bkp.h" 
+	#include "stm32f10x_cec.h" 
+	#include "stm32f10x_crc.h" 
+	#include "stm32f10x_dac.h" 
+	#include "stm32f10x_dbgmcu.h" 
+	#include "stm32f10x_dma.h" 
+	#include "stm32f10x_exti.h" 
+	#include "stm32f10x_flash.h" 
+	#include "stm32f10x_fsmc.h" 
+	#include "stm32f10x_gpio.h"
+	#include "stm32f10x_i2c.h" 
+	#include "stm32f10x_iwdg.h" 
+	#include "stm32f10x_pwr.h" 
+	#include "stm32f10x_rcc.h" 
+	#include "stm32f10x_rtc.h" 
+	#include "stm32f10x_sdio.h" 
+	#include "stm32f10x_spi.h" 
+	#include "stm32f10x_tim.h" 
+	#include "stm32f10x_usart.h" 
+	#include "stm32f10x_wwdg.h" 
+	#include "misc.h"  /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the 
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function which reports 
+  *         the name of the source file and the source line number of the call 
+  *         that failed. If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32F10x_CONF_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/User/stm32f10x_it.c b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/User/stm32f10x_it.c
new file mode 100644
index 0000000..6bd54fb
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/User/stm32f10x_it.c	
@@ -0,0 +1,162 @@
+/**
+  ******************************************************************************
+  * @file    Project/STM32F10x_StdPeriph_Template/stm32f10x_it.c 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Main Interrupt Service Routines.
+  *          This file provides template for all exceptions handler and 
+  *          peripherals interrupt service routine.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTI
+  
+  AL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_it.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Template
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/******************************************************************************/
+/*            Cortex-M3 Processor Exceptions Handlers                         */
+/******************************************************************************/
+
+/**
+  * @brief  This function handles NMI exception.
+  * @param  None
+  * @retval None
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Hard Fault exception.
+  * @param  None
+  * @retval None
+  */
+void HardFault_Handler(void)
+{
+  /* Go to infinite loop when Hard Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Memory Manage exception.
+  * @param  None
+  * @retval None
+  */
+void MemManage_Handler(void)
+{
+  /* Go to infinite loop when Memory Manage exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Bus Fault exception.
+  * @param  None
+  * @retval None
+  */
+void BusFault_Handler(void)
+{
+  /* Go to infinite loop when Bus Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Usage Fault exception.
+  * @param  None
+  * @retval None
+  */
+void UsageFault_Handler(void)
+{
+  /* Go to infinite loop when Usage Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles SVCall exception.
+  * @param  None
+  * @retval None
+  */
+void SVC_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Debug Monitor exception.
+  * @param  None
+  * @retval None
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles PendSVC exception.
+  * @param  None
+  * @retval None
+  */
+void PendSV_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles SysTick Handler.
+  * @param  None
+  * @retval None
+  */
+//void SysTick_Handler(void)
+//{
+//}
+
+/******************************************************************************/
+/*                 STM32F10x Peripherals Interrupt Handlers                   */
+/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
+/*  available peripheral interrupt handler's name please refer to the startup */
+/*  file (startup_stm32f10x_xx.s).                                            */
+/******************************************************************************/
+
+/**
+  * @brief  This function handles PPP interrupt request.
+  * @param  None
+  * @retval None
+  */
+/*void PPP_IRQHandler(void)
+{
+}*/
+
+/**
+  * @}
+  */ 
+
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Hardware/Firmware/GeekRobotBig_Firmware v1.0/User/stm32f10x_it.h b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/User/stm32f10x_it.h
new file mode 100644
index 0000000..8890262
--- /dev/null
+++ b/Hardware/Firmware/GeekRobotBig_Firmware v1.0/User/stm32f10x_it.h	
@@ -0,0 +1,54 @@
+/**
+  ******************************************************************************
+  * @file    Project/STM32F10x_StdPeriph_Template/stm32f10x_it.h 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IT_H
+#define __STM32F10x_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_IT_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/