153 lines
5.9 KiB
C
153 lines
5.9 KiB
C
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include "pwm_out.h"
|
|
|
|
void PB_PWMChannel_Init(TIM_TypeDef* TIMx, uint8_t Channel, uint16_t Prescaler,uint16_t Period, uint8_t GPIO_AF)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
|
|
TIM_OCInitTypeDef TIM_OCInitStructure;
|
|
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); //使能GPIO外设和AFIO复用功能模块时钟
|
|
|
|
if (TIMx == TIM1) {
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1, ENABLE);
|
|
if (GPIO_AF == 0) {
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
|
|
/******************************TIM1 Multiplexing Push-pull output*********************************************/
|
|
if (Channel == 1)
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
|
|
else if(Channel == 2)
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
|
|
else if(Channel == 3)
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
|
|
else if(Channel == 4)
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;
|
|
else return;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
} else if (GPIO_AF == 1 ) {
|
|
}
|
|
} else if (TIMx == TIM2) {
|
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
|
|
if (GPIO_AF == 0 ) {
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
|
|
/******************************TIM1 Multiplexing Push-pull output*********************************************/
|
|
if (Channel == 1)
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
|
|
else if (Channel == 2)
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;
|
|
else if (Channel == 3)
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
|
|
else if (Channel == 4)
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3;
|
|
else return;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
} else if (GPIO_AF == 1) {
|
|
}
|
|
} else if (TIMx == TIM3) {
|
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3,ENABLE);
|
|
if (GPIO_AF == 0) {
|
|
/******************************TIM1 Multiplexing Push-pull output*********************************************/
|
|
if (Channel == 1) {
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
} else if (Channel == 2) {
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7;
|
|
GPIO_Init(GPIOA, &GPIO_InitStructure);
|
|
} else if (Channel == 3) {
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
|
|
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
|
} else if (Channel == 4) {
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;
|
|
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
|
} else
|
|
return;
|
|
} else if (GPIO_AF == 1) {
|
|
GPIO_Init(GPIOC, &GPIO_InitStructure);
|
|
}
|
|
} else if (TIMx == TIM4) {
|
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM4,ENABLE);
|
|
if (GPIO_AF == 0) {
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
|
|
/******************************TIM1 Multiplexing Push-pull output*********************************************/
|
|
if (Channel == 1)
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6;
|
|
else if (Channel == 2)
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7;
|
|
else if (Channel == 3)
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
|
|
else if (Channel == 4)
|
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
|
|
else
|
|
return;
|
|
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
|
} else if (GPIO_AF == 1) {
|
|
}
|
|
}
|
|
|
|
TIM_TimeBaseStructure.TIM_Prescaler = Prescaler;
|
|
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
|
|
TIM_TimeBaseStructure.TIM_Period = Period;
|
|
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
|
|
TIM_TimeBaseStructure.TIM_RepetitionCounter = 0;
|
|
|
|
TIM_TimeBaseInit(TIMx, &TIM_TimeBaseStructure);
|
|
|
|
TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM2;
|
|
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
|
|
TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Disable;
|
|
TIM_OCInitStructure.TIM_Pulse =0;
|
|
TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_Low;
|
|
TIM_OCInitStructure.TIM_OCNPolarity = TIM_OCNPolarity_High;
|
|
TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Set;
|
|
TIM_OCInitStructure.TIM_OCNIdleState = TIM_OCIdleState_Reset;
|
|
TIM_OCInitStructure.TIM_Pulse = 0;
|
|
|
|
if (Channel == 1) {
|
|
TIM_OC1Init(TIMx, &TIM_OCInitStructure);
|
|
} else if (Channel == 2) {
|
|
TIM_OC2Init(TIMx, &TIM_OCInitStructure);
|
|
} else if (Channel == 3) {
|
|
TIM_OC3Init(TIMx, &TIM_OCInitStructure);
|
|
} else if (Channel == 4) {
|
|
TIM_OC4Init(TIMx, &TIM_OCInitStructure);
|
|
} else
|
|
return;
|
|
|
|
TIM_Cmd(TIMx, ENABLE);
|
|
TIM_CtrlPWMOutputs(TIMx, ENABLE);
|
|
}
|
|
|
|
//Set Pulse Width
|
|
void PB_Set_PWM(TIM_TypeDef* TIMx, uint8_t Channel, uint16_t Pwm_Value)
|
|
{
|
|
uint16_t TIM_PWM_Period;
|
|
TIM_PWM_Period = TIMx->ARR;
|
|
if (Pwm_Value <= 0) Pwm_Value = 0;
|
|
if (Pwm_Value >= TIM_PWM_Period)
|
|
Pwm_Value = TIM_PWM_Period;
|
|
if (Channel == 1) {
|
|
TIM_SetCompare1(TIMx, Pwm_Value);
|
|
} else if (Channel == 2){
|
|
TIM_SetCompare2(TIMx, Pwm_Value);
|
|
} else if (Channel == 3) {
|
|
TIM_SetCompare3(TIMx, Pwm_Value);
|
|
} else if (Channel == 4) {
|
|
TIM_SetCompare4(TIMx, Pwm_Value);
|
|
} else
|
|
return;
|
|
}
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|