110 lines
3.6 KiB
C
110 lines
3.6 KiB
C
#ifndef __PSTWO_H
|
||
#define __PSTWO_H
|
||
|
||
#include "board.h"
|
||
/*********************************************************
|
||
Copyright (C), 2015-2025, YFRobot.
|
||
www.yfrobot.com
|
||
File：PS2驱动程序
|
||
Author：pinggai Version:1.1 Data:2015/10/20
|
||
Description: PS2驱动程序
|
||
增加功能：
|
||
1、软件设置“红灯模式”、“绿灯模式”，并可以设置“保存”，通过手柄“模式按键”无法改变
|
||
2、设置手柄震动：通过数值的设置，改变左侧大震动电机震动频率。
|
||
通过数值的设置，开关右侧小震动电机。
|
||
History:
|
||
V1.0: 2015/05/16
|
||
1、手柄解码，识别按键值，读取模拟值。
|
||
**********************************************************/
|
||
#if 0
|
||
#define DI (Board::get()->getDIState(_JS_DAT)) //PB12 输入
|
||
|
||
#define DO_H (Board::get()->setDOState(_JS_CMD, 0)) //命令位高
|
||
#define DO_L (Board::get()->setDOState(_JS_CMD, 1)) //命令位低
|
||
|
||
#define CS_H (Board::get()->setDOState(_JS_CS, 0)) //CS拉高
|
||
#define CS_L (Board::get()->setDOState(_JS_CS, 1)) //CS拉低
|
||
|
||
#define CLK_H (Board::get()->setDOState(_JS_CLK, 0)) //时钟拉高
|
||
#define CLK_L (Board::get()->setDOState(_JS_CLK, 1)) //时钟拉低
|
||
#else
|
||
#include <stm32f10x.h>
|
||
|
||
#define BITBAND(addr, bitnum) ((addr & 0xF0000000)+0x2000000+((addr &0xFFFFF)<<5)+(bitnum<<2))
|
||
#define MEM_ADDR(addr) *((volatile unsigned long *)(addr))
|
||
#define BIT_ADDR(addr, bitnum) MEM_ADDR(BITBAND(addr, bitnum))
|
||
#define GPIOA_ODR_Addr (GPIOA_BASE+12) //0x4001080C
|
||
#define GPIOA_IDR_Addr (GPIOA_BASE+8) //0x40010808
|
||
#define PAout(n) BIT_ADDR(GPIOA_ODR_Addr,n) //输出
|
||
#define PAin(n) BIT_ADDR(GPIOA_IDR_Addr,n) //输入
|
||
|
||
|
||
#define DI PAin(4) //PB12 输入
|
||
|
||
#define DO_H PAout(5)=1 //命令位高
|
||
#define DO_L PAout(5)=0 //命令位低
|
||
|
||
#define CS_H PAout(0)=1 //CS拉高
|
||
#define CS_L PAout(0)=0 //CS拉低
|
||
|
||
#define CLK_H PAout(1)=1 //时钟拉高
|
||
#define CLK_L PAout(1)=0 //时钟拉低
|
||
#endif
|
||
|
||
//These are our button constants
|
||
#define PSB_SELECT 1
|
||
#define PSB_L3 2
|
||
#define PSB_R3 3
|
||
#define PSB_START 4
|
||
#define PSB_PAD_UP 5
|
||
#define PSB_PAD_RIGHT 6
|
||
#define PSB_PAD_DOWN 7
|
||
#define PSB_PAD_LEFT 8
|
||
#define PSB_L2 9
|
||
#define PSB_R2 10
|
||
#define PSB_L1 11
|
||
#define PSB_R1 12
|
||
#define PSB_GREEN 13
|
||
#define PSB_RED 14
|
||
#define PSB_BLUE 15
|
||
#define PSB_PINK 16
|
||
|
||
#define PSB_TRIANGLE 13
|
||
#define PSB_CIRCLE 14
|
||
#define PSB_CROSS 15
|
||
#define PSB_SQUARE 16
|
||
|
||
//#define WHAMMY_BAR 8
|
||
|
||
//These are stick values
|
||
#define PSS_RX 5 //右摇杆X轴数据
|
||
#define PSS_RY 6
|
||
#define PSS_LX 7
|
||
#define PSS_LY 8
|
||
|
||
extern unsigned char Data[9];
|
||
extern unsigned short MASK[16];
|
||
extern unsigned short Handkey;
|
||
|
||
void PS2_Init(void);
|
||
unsigned char PS2_RedLight(void); //判断是否为红灯模式
|
||
void PS2_ReadData(void); //读手柄数据
|
||
void PS2_Cmd(unsigned char CMD); //向手柄发送命令
|
||
unsigned char PS2_DataKey(void); //按键值读取
|
||
unsigned char PS2_AnologData(unsigned char button); //得到一个摇杆的模拟量
|
||
void PS2_ClearData(void); //清除数据缓冲区
|
||
void PS2_Vibration(unsigned char motor1, unsigned char motor2);//振动设置motor1 0xFF开，其他关，motor2 0x40~0xFF
|
||
|
||
void PS2_EnterConfing(void); //进入配置
|
||
void PS2_TurnOnAnalogMode(void); //发送模拟量
|
||
void PS2_VibrationMode(void); //振动设置
|
||
void PS2_ExitConfing(void); //完成配置
|
||
void PS2_SetInit(void); //配置初始化
|
||
|
||
#endif
|
||
|
||
|
||
|
||
|
||
|